KVM: s390: vsie: Fix possible race when shadowing region 3 tables

[ Upstream commit 1493e0f944f3c319d11e067c185c904d01c17ae5 ]

We have to properly retry again by returning -EINVAL immediately in case
somebody else instantiated the table concurrently. We missed to add the
goto in this function only. The code now matches the other, similar
shadowing functions.

We are overwriting an existing region 2 table entry. All allocated pages
are added to the crst_list to be freed later, so they are not lost
forever. However, when unshadowing the region 2 table, we wouldn't trigger
unshadowing of the original shadowed region 3 table that we replaced. It
would get unshadowed when the original region 3 table is modified. As it's
not connected to the page table hierarchy anymore, it's not going to get
used anymore. However, for a limited time, this page table will stick
around, so it's in some sense a temporary memory leak.

Identified by manual code inspection. I don't think this classifies as
stable material.

Fixes: 998f637cc4b9 ("s390/mm: avoid races on region/segment/page table shadowing")
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200403153050.20569-4-david@redhat.com
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

compiler.h: fix error in BUILD_BUG_ON() reporting

[ Upstream commit af9c5d2e3b355854ff0e4acfbfbfadcd5198a349 ]

compiletime_assert() uses __LINE__ to create a unique function name.  This
means that if you have more than one BUILD_BUG_ON() in the same source
line (which can happen if they appear e.g.  in a macro), then the error
message from the compiler might output the wrong condition.

For this source file:

#include <linux/build_bug.h>

#define macro() \
BUILD_BUG_ON(1); \
BUILD_BUG_ON(0);

void foo()
{
macro();
}

gcc would output:

./include/linux/compiler.h:350:38: error: call to `__compiletime_assert_9' declared with attribute error: BUILD_BUG_ON failed: 0
  _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)

However, it was not the BUILD_BUG_ON(0) that failed, so it should say 1
instead of 0. With this patch, we use __COUNTER__ instead of __LINE__, so
each BUILD_BUG_ON() gets a different function name and the correct
condition is printed:

./include/linux/compiler.h:350:38: error: call to `__compiletime_assert_0' declared with attribute error: BUILD_BUG_ON failed: 1
  _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)

Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Daniel Santos <daniel.santos@pobox.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Joe Perches <joe@perches.com>
Link: http://lkml.kernel.org/r/20200331112637.25047-1-vegard.nossum@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

percpu_counter: fix a data race at vm_committed_as

[ Upstream commit 7e2345200262e4a6056580f0231cccdaffc825f3 ]

"vm_committed_as.count" could be accessed concurrently as reported by
KCSAN,

 BUG: KCSAN: data-race in __vm_enough_memory / percpu_counter_add_batch

 write to 0xffffffff9451c538 of 8 bytes by task 65879 on cpu 35:
  percpu_counter_add_batch+0x83/0xd0
  percpu_counter_add_batch at lib/percpu_counter.c:91
  __vm_enough_memory+0xb9/0x260
  dup_mm+0x3a4/0x8f0
  copy_process+0x2458/0x3240
  _do_fork+0xaa/0x9f0
  __do_sys_clone+0x125/0x160
  __x64_sys_clone+0x70/0x90
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 read to 0xffffffff9451c538 of 8 bytes by task 66773 on cpu 19:
  __vm_enough_memory+0x199/0x260
  percpu_counter_read_positive at include/linux/percpu_counter.h:81
  (inlined by) __vm_enough_memory at mm/util.c:839
  mmap_region+0x1b2/0xa10
  do_mmap+0x45c/0x700
  vm_mmap_pgoff+0xc0/0x130
  ksys_mmap_pgoff+0x6e/0x300
  __x64_sys_mmap+0x33/0x40
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

The read is outside percpu_counter::lock critical section which results in
a data race.  Fix it by adding a READ_ONCE() in
percpu_counter_read_positive() which could also service as the existing
compiler memory barrier.

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Marco Elver <elver@google.com>
Link: http://lkml.kernel.org/r/1582302724-2804-1-git-send-email-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: do not commit super on read-only bdev

[ Upstream commit c96e2b8564adfb8ac14469ebc51ddc1bfecb3ae2 ]

Under some circumstances we may encounter a filesystem error on a
read-only block device, and if we try to save the error info to the
superblock and commit it, we'll wind up with a noisy error and
backtrace, i.e.:

[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode #
------------[ cut here ]------------
generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2)
WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0
...

To avoid this, commit the error info in the superblock only if the
block device is writable.

Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/4b6e774d-cc00-3469-7abb-108eb151071a@sandeen.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/maple: Fix declaration made after definition

[ Upstream commit af6cf95c4d003fccd6c2ecc99a598fb854b537e7 ]

When building ppc64 defconfig, Clang errors (trimmed for brevity):

  arch/powerpc/platforms/maple/setup.c:365:1: error: attribute declaration
  must precede definition [-Werror,-Wignored-attributes]
  machine_device_initcall(maple, maple_cpc925_edac_setup);
  ^

machine_device_initcall expands to __define_machine_initcall, which in
turn has the macro machine_is used in it, which declares mach_##name
with an __attribute__((weak)). define_machine actually defines
mach_##name, which in this file happens before the declaration, hence
the warning.

To fix this, move define_machine after machine_device_initcall so that
the declaration occurs before the definition, which matches how
machine_device_initcall and define_machine work throughout
arch/powerpc.

While we're here, remove some spaces before tabs.

Fixes: 8f101a051ef0 ("edac: cpc925 MC platform device setup")
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Suggested-by: Ilie Halip <ilie.halip@gmail.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200323222729.15365-1-natechancellor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/cpuinfo: fix wrong output when CPU0 is offline

[ Upstream commit 872f27103874a73783aeff2aac2b41a489f67d7c ]

/proc/cpuinfo should not print information about CPU 0 when it is offline.

Fixes: 281eaa8cb67c ("s390/cpuinfo: simplify locking and skip offline cpus early")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
[heiko.carstens@de.ibm.com: shortened commit message]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: direct.c: Fix memory leak of dreq when nfs_get_lock_context fails

[ Upstream commit 8605cf0e852af3b2c771c18417499dc4ceed03d5 ]

When dreq is allocated by nfs_direct_req_alloc(), dreq->kref is
initialized to 2. Therefore we need to call nfs_direct_req_release()
twice to release the allocated dreq. Usually it is called in
nfs_file_direct_{read, write}() and nfs_direct_complete().

However, current code only calls nfs_direct_req_relese() once if
nfs_get_lock_context() fails in nfs_file_direct_{read, write}().
So, that case would result in memory leak.

Fix this by adding the missing call.

Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: tegra: Fix Tegra PMC clock out parents

[ Upstream commit 6fe38aa8cac3a5db38154331742835a4d9740788 ]

Tegra PMC clocks clk_out_1, clk_out_2, and clk_out_3 supported parents
are osc, osc_div2, osc_div4 and extern clock.

Clock driver is using incorrect parents clk_m, clk_m_div2, clk_m_div4
for PMC clocks.

This patch fixes this.

Tested-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: bq27xxx_battery: Silence deferred-probe error

[ Upstream commit 583b53ece0b0268c542a1eafadb62e3d4b0aab8c ]

The driver fails to probe with -EPROBE_DEFER if battery's power supply
(charger driver) isn't ready yet and this results in a bit noisy error
message in KMSG during kernel's boot up. Let's silence the harmless
error message.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Andrew F. Davis <afd@ti.com>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: at91: usb: continue if clk_hw_round_rate() return zero

[ Upstream commit b0ecf1c6c6e82da4847900fad0272abfd014666d ]

clk_hw_round_rate() may call round rate function of its parents. In case
of SAM9X60 two of USB parrents are PLLA and UPLL. These clocks are
controlled by clk-sam9x60-pll.c driver. The round rate function for this
driver is sam9x60_pll_round_rate() which call in turn
sam9x60_pll_get_best_div_mul(). In case the requested rate is not in the
proper range (rate < characteristics->output[0].min &&
rate > characteristics->output[0].max) the sam9x60_pll_round_rate() will
return a negative number to its caller (called by
clk_core_round_rate_nolock()). clk_hw_round_rate() will return zero in
case a negative number is returned by clk_core_round_rate_nolock(). With
this, the USB clock will continue its rate computation even caller of
clk_hw_round_rate() returned an error. With this, the USB clock on SAM9X60
may not chose the best parent. I detected this after a suspend/resume
cycle on SAM9X60.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lkml.kernel.org/r/1579261009-4573-2-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: unittest: kmemleak in of_unittest_platform_populate()

[ Upstream commit 216830d2413cc61be3f76bc02ffd905e47d2439e ]

kmemleak reports several memory leaks from devicetree unittest.
This is the fix for problem 2 of 5.

of_unittest_platform_populate() left an elevated reference count for
grandchild nodes (which are platform devices).  Fix the platform
device reference counts so that the memory will be freed.

Fixes: fb2caa50fbac ("of/selftest: add testcase for nodes with same name and address")
Reported-by: Erhard F. <erhard_f@mailbox.org>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: cpu_errata: include required headers

commit 94a5d8790e79ab78f499d2d9f1ff2cab63849d9f upstream.

Without including psci.h and arm-smccc.h, we now get a build failure in
some configurations:

arch/arm64/kernel/cpu_errata.c: In function 'arm64_update_smccc_conduit':
arch/arm64/kernel/cpu_errata.c:278:10: error: 'psci_ops' undeclared (first use in this function); did you mean 'sysfs_ops'?

arch/arm64/kernel/cpu_errata.c: In function 'arm64_set_ssbd_mitigation':
arch/arm64/kernel/cpu_errata.c:311:3: error: implicit declaration of function 'arm_smccc_1_1_hvc' [-Werror=implicit-function-declaration]
   arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_WORKAROUND_2, state, NULL);

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: fix missing kobject init for !SYSFS && OF_DYNAMIC config

[ Upstream commit bd82bbf38cbe27f2c65660da801900d71bcc5cc8 ]

The ref counting is broken for OF_DYNAMIC when sysfs is disabled because
the kobject initialization is skipped. Only the properties
add/remove/update should be skipped for !SYSFS config.

Tested-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Frank Rowand <frowand.list@gmail.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: qcom: smem: Use le32_to_cpu for comparison

[ Upstream commit a216000f0140f415cec96129f777b5234c9d142f ]

Endianness can vary in the system, add le32_to_cpu when comparing
partition sizes from smem.

Signed-off-by: Chris Lew <clew@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wil6210: fix length check in __wmi_send

[ Upstream commit 26a6d5274865532502c682ff378ac8ebe2886238 ]

The current length check:
sizeof(cmd) + len > r->entry_size
will allow very large values of len (> U16_MAX - sizeof(cmd))
and can cause a buffer overflow. Fix the check to cover this case.
In addition, ensure the mailbox entry_size is not too small,
since this can also bypass the above check.

Signed-off-by: Lior David <qca_liord@qca.qualcomm.com>
Signed-off-by: Maya Erez <qca_merez@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: pm8xxx: Fix issue in RTC write path

[ Upstream commit 83220bf38b77a830f8e62ab1a0d0408304f9b966 ]

In order to set time in rtc, need to disable
rtc hw before writing into rtc registers.

Also fixes disabling of alarm while setting
rtc time.

Signed-off-by: Mohit Aggarwal <maggarwa@codeaurora.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wil6210: rate limit wil_rx_refill error

[ Upstream commit 3d6b72729cc2933906de8d2c602ae05e920b2122 ]

wil_err inside wil_rx_refill can flood the log buffer.
Replace it with wil_err_ratelimited.

Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: ufs-qcom: remove broken hci version quirk

[ Upstream commit 69a6fff068567469c0ef1156ae5ac8d3d71701f0 ]

UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION is only applicable for QCOM UFS host
controller version 2.x.y and this has been fixed from version 3.x.y
onwards, hence this change removes this quirk for version 3.x.y onwards.

[mkp: applied by hand]

Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: make sure all interrupts are processed

[ Upstream commit 7f6ba4f12e6cbfdefbb95cfd8fc67ece6c15d799 ]

As multiple requests are submitted to the ufs host controller in
parallel there could be instances where the command completion interrupt
arrives later for a request that is already processed earlier as the
corresponding doorbell was cleared when handling the previous
interrupt. Read the interrupt status in a loop after processing the
received interrupt to catch such interrupts and handle it.

Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wil6210: fix temperature debugfs

[ Upstream commit 6d9eb7ebae3d7e951bc0999235ae7028eb4cae4f ]

For negative temperatures, "temp" debugfs is showing wrong values.
Use signed types so proper calculations is done for sub zero
temperatures.

Signed-off-by: Dedy Lansky <dlansky@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wil6210: increase firmware ready timeout

[ Upstream commit 6ccae584014ef7074359eb4151086beef66ecfa9 ]

Firmware ready event may take longer than
current timeout in some scenarios, for example
with multiple RFs connected where each
requires an initial calibration.

Increase the timeout to support these scenarios.

Signed-off-by: Hamad Kadmany <hkadmany@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "gpio: set up initial state from .get_direction()"

[ Upstream commit 1ca2a92b2a99323f666f1b669b7484df4bda05e4 ]

This reverts commit 72d3200061776264941be1b5a9bb8e926b3b30a5.

We cannot blindly query the direction of all GPIOs when the pins are
first registered.  The get_direction callback normally triggers a
read/write to hardware, but we shouldn't be touching the hardware for
an individual GPIO until after it's been properly claimed.

Signed-off-by: Timur Tabi <timur@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: NULL pointer dereference [null-pointer-deref] (CWE 476) problem

commit 22a07038c0eaf4d1315a493ce66dcd255accba19 upstream.

The Parfait (version 2.1.0) static code analysis tool found the
following NULL pointer derefernce problem.

- drivers/gpu/drm/drm_dp_mst_topology.c
The call to drm_dp_calculate_rad() in function drm_dp_port_setup_pdt()
could result in a NULL pointer being returned to port->mstb due to a
failure to allocate memory for port->mstb.

Signed-off-by: Joe Moriarty <joe.moriarty@oracle.com>
Reviewed-by: Steven Sistare <steven.sistare@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180212195144.98323-3-joe.moriarty@oracle.com
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

video: fbdev: sis: Remove unnecessary parentheses and commented code

commit 864eb1afc60cb43e7df879b97f8ca0d719bbb735 upstream.

Clang warns when multiple pairs of parentheses are used for a single
conditional statement.

drivers/video/fbdev/sis/init301.c:851:42: warning: equality comparison
with extraneous parentheses [-Wparentheses-equality]
      } else if((SiS_Pr->SiS_IF_DEF_LVDS == 1) /* ||
                 ~~~~~~~~~~~~~~~~~~~~~~~~^~~~
drivers/video/fbdev/sis/init301.c:851:42: note: remove extraneous
parentheses around the comparison to silence this warning
      } else if((SiS_Pr->SiS_IF_DEF_LVDS == 1) /* ||
                ~                        ^   ~
drivers/video/fbdev/sis/init301.c:851:42: note: use '=' to turn this
equality comparison into an assignment
      } else if((SiS_Pr->SiS_IF_DEF_LVDS == 1) /* ||
                                         ^~
                                         =
1 warning generated.

Remove the parentheses and while we're at it, clean up the commented
code, which has been here since the beginning of git history.

Link: https://github.com/ClangBuiltLinux/linux/issues/118
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Thomas Winischhofer <thomas@winischhofer.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Don't release card at firmware loading error

commit 25faa4bd37c10f19e4b848b9032a17a3d44c6f09 upstream.

At the error path of the firmware loading error, the driver tries to
release the card object and set NULL to drvdata.  This may be referred
badly at the possible PM action, as the driver itself is still bound
and the PM callbacks read the card object.

Instead, we continue the probing as if it were no option set.  This is
often a better choice than the forced abort, too.

Fixes: 5cb543dba986 ("ALSA: hda - Deferred probing with request_firmware_nowait()")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207043
Link: https://lore.kernel.org/r/20200413082034.25166-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: sg: add sg_remove_request in sg_common_write

commit 849f8583e955dbe3a1806e03ecacd5e71cce0a08 upstream.

If the dxfer_len is greater than 256M then the request is invalid and we
need to call sg_remove_request in sg_common_write.

Link: https://lore.kernel.org/r/1586777361-17339-1-git-send-email-huawei.libin@huawei.com
Fixes: f930c7043663 ("scsi: sg: only check for dxfer_len greater than 256M")
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool: Fix switch table detection in .text.unlikely

commit b401efc120a399dfda1f4d2858a4de365c9b08ef upstream.

If a switch jump table's indirect branch is in a ".cold" subfunction in
.text.unlikely, objtool doesn't detect it, and instead prints a false
warning:

  drivers/media/v4l2-core/v4l2-ioctl.o: warning: objtool: v4l_print_format.cold()+0xd6: sibling call from callable instruction with modified stack frame
  drivers/hwmon/max6650.o: warning: objtool: max6650_probe.cold()+0xa5: sibling call from callable instruction with modified stack frame
  drivers/media/dvb-frontends/drxk_hard.o: warning: objtool: init_drxk.cold()+0x16f: sibling call from callable instruction with modified stack frame

Fix it by comparing the function, instead of the section and offset.

Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/157c35d42ca9b6354bbb1604fe9ad7d1153ccb21.1585761021.git.jpoimboe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix the race between registering 'snapshot' event trigger and triggering 'snapshot' operation

commit 0bbe7f719985efd9adb3454679ecef0984cb6800 upstream.

Traced event can trigger 'snapshot' operation(i.e. calls snapshot_trigger()
or snapshot_count_trigger()) when register_snapshot_trigger() has completed
registration but doesn't allocate buffer for 'snapshot' event trigger.  In
the rare case, 'snapshot' operation always detects the lack of allocated
buffer so make register_snapshot_trigger() allocate buffer first.

trigger-snapshot.tc in kselftest reproduces the issue on slow vm:
-----------------------------------------------------------
cat trace
...
ftracetest-3028  [002] ....   236.784290: sched_process_fork: comm=ftracetest pid=3028 child_comm=ftracetest child_pid=3036
     <...>-2875  [003] ....   240.460335: tracing_snapshot_instance_cond: *** SNAPSHOT NOT ALLOCATED ***
     <...>-2875  [003] ....   240.460338: tracing_snapshot_instance_cond: *** stopping trace here!   ***
-----------------------------------------------------------

Link: http://lkml.kernel.org/r/20200414015145.66236-1-yangx.jy@cn.fujitsu.com
Cc: stable@vger.kernel.org
Fixes: 93e31ffbf417a ("tracing: Add 'snapshot' event trigger command")
Signed-off-by: Xiao Yang <yangx.jy@cn.fujitsu.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: target: fix hang when multiple threads try to destroy the same iscsi session

[ Upstream commit 57c46e9f33da530a2485fa01aa27b6d18c28c796 ]

A number of hangs have been reported against the target driver; they are
due to the fact that multiple threads may try to destroy the iscsi session
at the same time. This may be reproduced for example when a "targetcli
iscsi/iqn.../tpg1 disable" command is executed while a logout operation is
underway.

When this happens, two or more threads may end up sleeping and waiting for
iscsit_close_connection() to execute "complete(session_wait_comp)".  Only
one of the threads will wake up and proceed to destroy the session
structure, the remaining threads will hang forever.

Note that if the blocked threads are somehow forced to wake up with
complete_all(), they will try to free the same iscsi session structure
destroyed by the first thread, causing double frees, memory corruptions
etc...

With this patch, the threads that want to destroy the iscsi session will
increase the session refcount and will set the "session_close" flag to 1;
then they wait for the driver to close the remaining active connections.
When the last connection is closed, iscsit_close_connection() will wake up
all the threads and will wait for the session's refcount to reach zero;
when this happens, iscsit_close_connection() will destroy the session
structure because no one is referencing it anymore.

 INFO: task targetcli:5971 blocked for more than 120 seconds.
       Tainted: P           OE    4.15.0-72-generic #81~16.04.1
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 targetcli       D    0  5971      1 0x00000080
 Call Trace:
  __schedule+0x3d6/0x8b0
  ? vprintk_func+0x44/0xe0
  schedule+0x36/0x80
  schedule_timeout+0x1db/0x370
  ? __dynamic_pr_debug+0x8a/0xb0
  wait_for_completion+0xb4/0x140
  ? wake_up_q+0x70/0x70
  iscsit_free_session+0x13d/0x1a0 [iscsi_target_mod]
  iscsit_release_sessions_for_tpg+0x16b/0x1e0 [iscsi_target_mod]
  iscsit_tpg_disable_portal_group+0xca/0x1c0 [iscsi_target_mod]
  lio_target_tpg_enable_store+0x66/0xe0 [iscsi_target_mod]
  configfs_write_file+0xb9/0x120
  __vfs_write+0x1b/0x40
  vfs_write+0xb8/0x1b0
  SyS_write+0x5c/0xe0
  do_syscall_64+0x73/0x130
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Link: https://lore.kernel.org/r/20200313170656.9716-3-mlombard@redhat.com
Reported-by: Matt Coleman <mcoleman@datto.com>
Tested-by: Matt Coleman <mcoleman@datto.com>
Tested-by: Rahul Kundu <rahul.kundu@chelsio.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: remove boilerplate code

[ Upstream commit e49a7d994379278d3353d7ffc7994672752fb0ad ]

iscsit_free_session() is equivalent to iscsit_stop_session() followed by a
call to iscsit_close_session().

Link: https://lore.kernel.org/r/20200313170656.9716-2-mlombard@redhat.com
Tested-by: Rahul Kundu <rahul.kundu@chelsio.com>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBD

commit 396d2e878f92ec108e4293f1c77ea3bc90b414ff upstream.

The host reports support for the synthetic feature X86_FEATURE_SSBD
when any of the three following hardware features are set:
  CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31]
  CPUID.80000008H:EBX.AMD_SSBD[bit 24]
  CPUID.80000008H:EBX.VIRT_SSBD[bit 25]

Either of the first two hardware features implies the existence of the
IA32_SPEC_CTRL MSR, but CPUID.80000008H:EBX.VIRT_SSBD[bit 25] does
not. Therefore, CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] should only be
set in the guest if CPUID.(EAX=7,ECX=0):EDX.SSBD[bit 31] or
CPUID.80000008H:EBX.AMD_SSBD[bit 24] is set on the host.

Fixes: 0c54914d0c52a ("KVM: x86: use Intel speculation bugs and features as derived in generic x86 code")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Jacob Xu <jacobhxu@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[bwh: Backported to 4.x: adjust indentation]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm flakey: check for null arg_name in parse_features()

[ Upstream commit 7690e25302dc7d0cd42b349e746fe44b44a94f2b ]

One can crash dm-flakey by specifying more feature arguments than the
number of features supplied.  Checking for null in arg_name avoids
this.

dmsetup create flakey-test --table "0 66076080 flakey /dev/sdb9 0 0 180 2 drop_writes"

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: do not zeroout extents beyond i_disksize

commit 801674f34ecfed033b062a0f217506b93c8d5e8a upstream.

We do not want to create initialized extents beyond end of file because
for e2fsck it is impossible to distinguish them from a case of corrupted
file size / extent tree and so it complains like:

Inode 12, i_size is 147456, should be 163840.  Fix? no

Code in ext4_ext_convert_to_initialized() and
ext4_split_convert_extents() try to make sure it does not create
initialized extents beyond inode size however they check against
inode->i_size which is wrong. They should instead check against
EXT4_I(inode)->i_disksize which is the current inode size on disk.
That's what e2fsck is going to see in case of crash before all dirty
data is written. This bug manifests as generic/456 test failure (with
recent enough fstests where fsx got fixed to properly pass
FALLOC_KEEP_SIZE_FL flags to the kernel) when run with dioread_lock
mount option.

CC: stable@vger.kernel.org
Fixes: 21ca087a3891 ("ext4: Do not zero out uninitialized extents beyond i_size")
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20200331105016.8674-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211_hwsim: Use kstrndup() in place of kasprintf()

commit 7ea862048317aa76d0f22334202779a25530980c upstream.

syzbot reports a warning:

precision 33020 too large
WARNING: CPU: 0 PID: 9618 at lib/vsprintf.c:2471 set_precision+0x150/0x180 lib/vsprintf.c:2471
 vsnprintf+0xa7b/0x19a0 lib/vsprintf.c:2547
 kvasprintf+0xb2/0x170 lib/kasprintf.c:22
 kasprintf+0xbb/0xf0 lib/kasprintf.c:59
 hwsim_del_radio_nl+0x63a/0x7e0 drivers/net/wireless/mac80211_hwsim.c:3625
 genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline]
 ...
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Thus it seems that kasprintf() with "%.*s" format can not be used for
duplicating a string with arbitrary length. Replace it with kstrndup().

Note that later this string is limited to NL80211_WIPHY_NAME_MAXLEN == 64,
but the code is simpler this way.

Reported-by: syzbot+6693adf1698864d21734@syzkaller.appspotmail.com
Reported-by: syzbot+a4aee3f42d7584d76761@syzkaller.appspotmail.com
Cc: stable@kernel.org
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Link: https://lore.kernel.org/r/20200410123257.14559-1-tuomas.tynkkynen@iki.fi
[johannes: add note about length limit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: check commit root generation in should_ignore_root

commit 4d4225fc228e46948486d8b8207955f0c031b92e upstream.

Previously we would set the reloc root's last snapshot to transid - 1.
However there was a problem with doing this, and we changed it to
setting the last snapshot to the generation of the commit node of the fs
root.

This however broke should_ignore_root().  The assumption is that if we
are in a generation newer than when the reloc root was created, then we
would find the reloc root through normal backref lookups, and thus can
ignore any fs roots we find with an old enough reloc root.

Now that the last snapshot could be considerably further in the past
than before, we'd end up incorrectly ignoring an fs root.  Thus we'd
find no nodes for the bytenr we were searching for, and we'd fail to
relocate anything.  We'd loop through the relocate code again and see
that there were still used space in that block group, attempt to
relocate those bytenr's again, fail in the same way, and just loop like
this forever.  This is tricky in that we have to not modify the fs root
at all during this time, so we need to have a block group that has data
in this fs root that is not shared by any other root, which is why this
has been difficult to reproduce.

Fixes: 054570a1dc94 ("Btrfs: fix relocation incorrectly dropping data references")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Don't override ignore_ctl_error value from the map

commit 3507245b82b4362dc9721cbc328644905a3efa22 upstream.

The mapping table may contain also ignore_ctl_error flag for devices
that are known to behave wild.  Since this flag always writes the
card's own ignore_ctl_error flag, it overrides the value already set
by the module option, so it doesn't follow user's expectation.
Let's fix the code not to clear the flag that has been set by user.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206873
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200412081331.4742-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: mrfld: return error codes when an error occurs

commit 3025571edd9df653e1ad649f0638368a39d1bbb5 upstream.

Currently function sst_platform_get_resources always returns zero and
error return codes set by the function are never returned. Fix this
by returning the error return code in variable ret rather than the
hard coded zero.

Addresses-Coverity: ("Unused value")
Fixes: f533a035e4da ("ASoC: Intel: mrfld - create separate module for pci part")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200208220720.36657-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: mrfld: fix incorrect check on p->sink

commit f5e056e1e46fcbb5f74ce560792aeb7d57ce79e6 upstream.

The check on p->sink looks bogus, I believe it should be p->source
since the following code blocks are related to p->source. Fix
this by replacing p->sink with p->source.

Fixes: 24c8d14192cc ("ASoC: Intel: mrfld: add DSP core controls")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Copy-paste error")
Link: https://lore.kernel.org/r/20191119113640.166940-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix incorrect inodes per group in error message

commit b9c538da4e52a7b79dfcf4cfa487c46125066dfb upstream.

If ext4_fill_super detects an invalid number of inodes per group, the
resulting error message printed the number of blocks per group, rather
than the number of inodes per group. Fix it to print the correct value.

Fixes: cd6bb35bf7f6d ("ext4: use more strict checks for inodes_per_block on mount")
Link: https://lore.kernel.org/r/8be03355983a08e5d4eed480944613454d7e2550.1585434649.git.josh@joshtriplett.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix incorrect group count in ext4_fill_super error message

commit df41460a21b06a76437af040d90ccee03888e8e5 upstream.

ext4_fill_super doublechecks the number of groups before mounting; if
that check fails, the resulting error message prints the group count
from the ext4_sb_info sbi, which hasn't been set yet. Print the freshly
computed group count instead (which at that point has just been computed
in "blocks_count").

Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Fixes: 4ec1102813798 ("ext4: Add sanity checks for the superblock before mounting the filesystem")
Link: https://lore.kernel.org/r/8b957cd1513fcc4550fe675c10bcce2175c33a49.1585431964.git.josh@joshtriplett.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

jbd2: improve comments about freeing data buffers whose page mapping is NULL

commit 780f66e59231fcf882f36c63f287252ee47cc75a upstream.

Improve comments in jbd2_journal_commit_transaction() to describe why
we don't need to clear the buffer_mapped bit for freeing file mapping
buffers whose page mapping is NULL.

Link: https://lore.kernel.org/r/20200217112706.20085-1-yi.zhang@huawei.com
Fixes: c96dceeabf76 ("jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer")
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: Fix ufshcd_hold() caused scheduling while atomic

commit c63d6099a7959ecc919b2549dc6b71f53521f819 upstream.

The async version of ufshcd_hold(async == true), which is only called in
queuecommand path as for now, is expected to work in atomic context, thus
it should not sleep or schedule out. When it runs into the condition that
clocks are ON but link is still in hibern8 state, it should bail out
without flushing the clock ungate work.

Fixes: f2a785ac2312 ("scsi: ufshcd: Fix race between clk scaling and ungate work")
Link: https://lore.kernel.org/r/1581392451-28743-6-git-send-email-cang@codeaurora.org
Reviewed-by: Hongwu Su <hongwus@codeaurora.org>
Reviewed-by: Asutosh Das <asutoshd@codeaurora.org>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv6: do not consider routes via gateways for anycast address check

[ Upstream commit 03e2a984b6165621f287fadf5f4b5cd8b58dcaba ]

The behaviour for what is considered an anycast address changed in
commit 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after
encountering pmtu exception"). This now considers the first
address in a subnet where there is a route via a gateway
to be an anycast address.

This breaks path MTU discovery and traceroutes when a host in a
remote network uses the address at the start of a prefix
(eg 2600:: advertised as 2600::/48 in the DFZ) as ICMP errors
will not be sent to anycast addresses.

This patch excludes any routes with a gateway, or via point to
point links, like the behaviour previously from
rt6_is_gw_or_nonexthop in net/ipv6/route.c.

This can be tested with:
ip link add v1 type veth peer name v2
ip netns add test
ip netns exec test ip link set lo up
ip link set v2 netns test
ip link set v1 up
ip netns exec test ip link set v2 up
ip addr add 2001:db8::1/64 dev v1 nodad
ip addr add 2001:db8:100:: dev lo nodad
ip netns exec test ip addr add 2001:db8::2/64 dev v2 nodad
ip netns exec test ip route add unreachable 2001:db8:1::1
ip netns exec test ip route add 2001:db8:100::/64 via 2001:db8::1
ip netns exec test sysctl net.ipv6.conf.all.forwarding=1
ip route add 2001:db8:1::1 via 2001:db8::2
ping -I 2001:db8::1 2001:db8:1::1 -c1
ping -I 2001:db8:100:: 2001:db8:1::1 -c1
ip addr delete 2001:db8:100:: dev lo
ip netns delete test

Currently the first ping will get back a destination unreachable ICMP
error, but the second will never get a response, with "icmp6_send:
acast source" logged. After this patch, both get destination
unreachable ICMP replies.

Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception")
Signed-off-by: Tim Stallard <code@timstallard.me.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qrtr: send msgs from local of same id as broadcast

[ Upstream commit 6dbf02acef69b0742c238574583b3068afbd227c ]

If the local node id(qrtr_local_nid) is not modified after its
initialization, it equals to the broadcast node id(QRTR_NODE_BCAST).
So the messages from local node should not be taken as broadcast
and keep the process going to send them out anyway.

The definitions are as follow:
static unsigned int qrtr_local_nid = NUMA_NO_NODE;

Fixes: fdf5fd397566 ("net: qrtr: Broadcast messages only from control port")
Signed-off-by: Wang Wenhu <wenhu.wang@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: ipv4: devinet: Fix crash when add/del multicast IP with autojoin

[ Upstream commit 690cc86321eb9bcee371710252742fb16fe96824 ]

When CONFIG_IP_MULTICAST is not set and multicast ip is added to the device
with autojoin flag or when multicast ip is deleted kernel will crash.

steps to reproduce:

ip addr add 224.0.0.0/32 dev eth0
ip addr del 224.0.0.0/32 dev eth0

or

ip addr add 224.0.0.0/32 dev eth0 autojoin

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088
 pc : _raw_write_lock_irqsave+0x1e0/0x2ac
 lr : lock_sock_nested+0x1c/0x60
 Call trace:
  _raw_write_lock_irqsave+0x1e0/0x2ac
  lock_sock_nested+0x1c/0x60
  ip_mc_config.isra.28+0x50/0xe0
  inet_rtm_deladdr+0x1a8/0x1f0
  rtnetlink_rcv_msg+0x120/0x350
  netlink_rcv_skb+0x58/0x120
  rtnetlink_rcv+0x14/0x20
  netlink_unicast+0x1b8/0x270
  netlink_sendmsg+0x1a0/0x3b0
  ____sys_sendmsg+0x248/0x290
  ___sys_sendmsg+0x80/0xc0
  __sys_sendmsg+0x68/0xc0
  __arm64_sys_sendmsg+0x20/0x30
  el0_svc_common.constprop.2+0x88/0x150
  do_el0_svc+0x20/0x80
 el0_sync_handler+0x118/0x190
  el0_sync+0x140/0x180

Fixes: 93a714d6b53d ("multicast: Extend ip address command to enable multicast group join/leave on")
Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu>
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hsr: check protocol version in hsr_newlink()

[ Upstream commit 4faab8c446def7667adf1f722456c2f4c304069c ]

In the current hsr code, only 0 and 1 protocol versions are valid.
But current hsr code doesn't check the version, which is received by
userspace.

Test commands:
    ip link add dummy0 type dummy
    ip link add dummy1 type dummy
    ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 version 4

In the test commands, version 4 is invalid.
So, the command should be failed.

After this patch, following error will occur.
"Error: hsr: Only versions 0..1 are supported."

Fixes: ee1c27977284 ("net/hsr: Added support for HSR v1")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: dln2: Fix sanity checking for endpoints

[ Upstream commit fb945c95a482200876993977008b67ea658bd938 ]

While the commit 2b8bd606b1e6 ("mfd: dln2: More sanity checking for endpoints")
tries to harden the sanity checks it made at the same time a regression,
i.e.  mixed in and out endpoints. Obviously it should have been not tested on
real hardware at that time, but unluckily it didn't happen.

So, fix above mentioned typo and make device being enumerated again.

While here, introduce an enumerator for magic values to prevent similar issue
to happen in the future.

Fixes: 2b8bd606b1e6 ("mfd: dln2: More sanity checking for endpoints")
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: echo: Remove unnecessary parentheses and simplify check for zero

[ Upstream commit 85dc2c65e6c975baaf36ea30f2ccc0a36a8c8add ]

Clang warns when multiple pairs of parentheses are used for a single
conditional statement.

drivers/misc/echo/echo.c:384:27: warning: equality comparison with
extraneous parentheses [-Wparentheses-equality]
        if ((ec->nonupdate_dwell == 0)) {
             ~~~~~~~~~~~~~~~~~~~~^~~~
drivers/misc/echo/echo.c:384:27: note: remove extraneous parentheses
around the comparison to silence this warning
        if ((ec->nonupdate_dwell == 0)) {
            ~                    ^   ~
drivers/misc/echo/echo.c:384:27: note: use '=' to turn this equality
comparison into an assignment
        if ((ec->nonupdate_dwell == 0)) {
                                 ^~
                                 =
1 warning generated.

Remove them and while we're at it, simplify the zero check as '!var' is
used more than 'var == 0'.

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/fsl_booke: Avoid creating duplicate tlb1 entry

[ Upstream commit aa4113340ae6c2811e046f08c2bc21011d20a072 ]

In the current implementation, the call to loadcam_multi() is wrapped
between switch_to_as1() and restore_to_as0() calls so, when it tries
to create its own temporary AS=1 TLB1 entry, it ends up duplicating
the existing one created by switch_to_as1(). Add a check to skip
creating the temporary entry if already running in AS=1.

Fixes: d9e1831a4202 ("powerpc/85xx: Load all early TLB entries at once")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200123111914.2565-1-laurentiu.tudor@nxp.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipmi: fix hung processes in __get_guid()

[ Upstream commit 32830a0534700f86366f371b150b17f0f0d140d7 ]

The wait_event() function is used to detect command completion.
When send_guid_cmd() returns an error, smi_send() has not been
called to send data. Therefore, wait_event() should not be used
on the error path, otherwise it will cause the following warning:

[ 1361.588808] systemd-udevd   D    0  1501   1436 0x00000004
[ 1361.588813]  ffff883f4b1298c0 0000000000000000 ffff883f4b188000 ffff887f7e3d9f40
[ 1361.677952]  ffff887f64bd4280 ffffc90037297a68 ffffffff8173ca3b ffffc90000000010
[ 1361.767077]  00ffc90037297ad0 ffff887f7e3d9f40 0000000000000286 ffff883f4b188000
[ 1361.856199] Call Trace:
[ 1361.885578]  [<ffffffff8173ca3b>] ? __schedule+0x23b/0x780
[ 1361.951406]  [<ffffffff8173cfb6>] schedule+0x36/0x80
[ 1362.010979]  [<ffffffffa071f178>] get_guid+0x118/0x150 [ipmi_msghandler]
[ 1362.091281]  [<ffffffff810d5350>] ? prepare_to_wait_event+0x100/0x100
[ 1362.168533]  [<ffffffffa071f755>] ipmi_register_smi+0x405/0x940 [ipmi_msghandler]
[ 1362.258337]  [<ffffffffa0230ae9>] try_smi_init+0x529/0x950 [ipmi_si]
[ 1362.334521]  [<ffffffffa022f350>] ? std_irq_setup+0xd0/0xd0 [ipmi_si]
[ 1362.411701]  [<ffffffffa0232bd2>] init_ipmi_si+0x492/0x9e0 [ipmi_si]
[ 1362.487917]  [<ffffffffa0232740>] ? ipmi_pci_probe+0x280/0x280 [ipmi_si]
[ 1362.568219]  [<ffffffff810021a0>] do_one_initcall+0x50/0x180
[ 1362.636109]  [<ffffffff812231b2>] ? kmem_cache_alloc_trace+0x142/0x190
[ 1362.714330]  [<ffffffff811b2ae1>] do_init_module+0x5f/0x200
[ 1362.781208]  [<ffffffff81123ca8>] load_module+0x1898/0x1de0
[ 1362.848069]  [<ffffffff811202e0>] ? __symbol_put+0x60/0x60
[ 1362.913886]  [<ffffffff8130696b>] ? security_kernel_post_read_file+0x6b/0x80
[ 1362.998514]  [<ffffffff81124465>] SYSC_finit_module+0xe5/0x120
[ 1363.068463]  [<ffffffff81124465>] ? SYSC_finit_module+0xe5/0x120
[ 1363.140513]  [<ffffffff811244be>] SyS_finit_module+0xe/0x10
[ 1363.207364]  [<ffffffff81003c04>] do_syscall_64+0x74/0x180

Fixes: 50c812b2b951 ("[PATCH] ipmi: add full sysfs support")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: openipmi-developer@lists.sourceforge.net
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 2.6.17-
Message-Id: <20200403090408.58745-1-wenyang@linux.alibaba.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: Remove PageReserved manipulation from drm_pci_alloc

[ Upstream commit ea36ec8623f56791c6ff6738d0509b7920f85220 ]

drm_pci_alloc/drm_pci_free are very thin wrappers around the core dma
facilities, and we have no special reason within the drm layer to behave
differently. In particular, since

commit de09d31dd38a50fdce106c15abd68432eebbd014
Author: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Date:   Fri Jan 15 16:51:42 2016 -0800

    page-flags: define PG_reserved behavior on compound pages

    As far as I can see there's no users of PG_reserved on compound pages.
    Let's use PF_NO_COMPOUND here.

it has been illegal to combine GFP_COMP with SetPageReserved, so lets
stop doing both and leave the dma layer to its own devices.

Reported-by: Taketo Kabe
Bug: https://gitlab.freedesktop.org/drm/intel/issues/1027
Fixes: de09d31dd38a ("page-flags: define PG_reserved behavior on compound pages")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v4.5+
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202171635.4039044-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/dp_mst: Fix clearing payload state on topology disable

[ Upstream commit 8732fe46b20c951493bfc4dba0ad08efdf41de81 ]

The issues caused by:

commit 64e62bdf04ab ("drm/dp_mst: Remove VCPI while disabling topology
mgr")

Prompted me to take a closer look at how we clear the payload state in
general when disabling the topology, and it turns out there's actually
two subtle issues here.

The first is that we're not grabbing &mgr.payload_lock when clearing the
payloads in drm_dp_mst_topology_mgr_set_mst(). Seeing as the canonical
lock order is &mgr.payload_lock -> &mgr.lock (because we always want
&mgr.lock to be the inner-most lock so topology validation always
works), this makes perfect sense. It also means that -technically- there
could be racing between someone calling
drm_dp_mst_topology_mgr_set_mst() to disable the topology, along with a
modeset occurring that's modifying the payload state at the same time.

The second is the more obvious issue that Wayne Lin discovered, that
we're not clearing proposed_payloads when disabling the topology.

I actually can't see any obvious places where the racing caused by the
first issue would break something, and it could be that some of our
higher-level locks already prevent this by happenstance, but better safe
then sorry. So, let's make it so that drm_dp_mst_topology_mgr_set_mst()
first grabs &mgr.payload_lock followed by &mgr.lock so that we never
race when modifying the payload state. Then, we also clear
proposed_payloads to fix the original issue of enabling a new topology
with a dirty payload state. This doesn't clear any of the drm_dp_vcpi
structures, but those are getting destroyed along with the ports anyway.

Changes since v1:
* Use sizeof(mgr->payloads[0])/sizeof(mgr->proposed_vcpis[0]) instead -
  vsyrjala

Cc: Sean Paul <sean@poorly.run>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122194321.14953-1-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Btrfs: fix crash during unmount due to race with delayed inode workers

[ Upstream commit f0cc2cd70164efe8f75c5d99560f0f69969c72e4 ]

During unmount we can have a job from the delayed inode items work queue
still running, that can lead to at least two bad things:

1) A crash, because the worker can try to create a transaction just
   after the fs roots were freed;

2) A transaction leak, because the worker can create a transaction
   before the fs roots are freed and just after we committed the last
   transaction and after we stopped the transaction kthread.

A stack trace example of the crash:

 [79011.691214] kernel BUG at lib/radix-tree.c:982!
 [79011.692056] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
 [79011.693180] CPU: 3 PID: 1394 Comm: kworker/u8:2 Tainted: G        W         5.6.0-rc2-btrfs-next-54 #2
 (...)
 [79011.696789] Workqueue: btrfs-delayed-meta btrfs_work_helper [btrfs]
 [79011.697904] RIP: 0010:radix_tree_tag_set+0xe7/0x170
 (...)
 [79011.702014] RSP: 0018:ffffb3c84a317ca0 EFLAGS: 00010293
 [79011.702949] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
 [79011.704202] RDX: ffffb3c84a317cb0 RSI: ffffb3c84a317ca8 RDI: ffff8db3931340a0
 [79011.705463] RBP: 0000000000000005 R08: 0000000000000005 R09: ffffffff974629d0
 [79011.706756] R10: ffffb3c84a317bc0 R11: 0000000000000001 R12: ffff8db393134000
 [79011.708010] R13: ffff8db3931340a0 R14: ffff8db393134068 R15: 0000000000000001
 [79011.709270] FS:  0000000000000000(0000) GS:ffff8db3b6a00000(0000) knlGS:0000000000000000
 [79011.710699] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [79011.711710] CR2: 00007f22c2a0a000 CR3: 0000000232ad4005 CR4: 00000000003606e0
 [79011.712958] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 [79011.714205] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 [79011.715448] Call Trace:
 [79011.715925]  record_root_in_trans+0x72/0xf0 [btrfs]
 [79011.716819]  btrfs_record_root_in_trans+0x4b/0x70 [btrfs]
 [79011.717925]  start_transaction+0xdd/0x5c0 [btrfs]
 [79011.718829]  btrfs_async_run_delayed_root+0x17e/0x2b0 [btrfs]
 [79011.719915]  btrfs_work_helper+0xaa/0x720 [btrfs]
 [79011.720773]  process_one_work+0x26d/0x6a0
 [79011.721497]  worker_thread+0x4f/0x3e0
 [79011.722153]  ? process_one_work+0x6a0/0x6a0
 [79011.722901]  kthread+0x103/0x140
 [79011.723481]  ? kthread_create_worker_on_cpu+0x70/0x70
 [79011.724379]  ret_from_fork+0x3a/0x50
 (...)

The following diagram shows a sequence of steps that lead to the crash
during ummount of the filesystem:

        CPU 1                                             CPU 2                                CPU 3

 btrfs_punch_hole()
   btrfs_btree_balance_dirty()
     btrfs_balance_delayed_items()
       --> sees
           fs_info->delayed_root->items
           with value 200, which is greater
           than
           BTRFS_DELAYED_BACKGROUND (128)
           and smaller than
           BTRFS_DELAYED_WRITEBACK (512)
       btrfs_wq_run_delayed_node()
         --> queues a job for
             fs_info->delayed_workers to run
             btrfs_async_run_delayed_root()

                                                                                            btrfs_async_run_delayed_root()
                                                                                              --> job queued by CPU 1

                                                                                              --> starts picking and running
                                                                                                  delayed nodes from the
                                                                                                  prepare_list list

                                                 close_ctree()

                                                   btrfs_delete_unused_bgs()

                                                   btrfs_commit_super()

                                                     btrfs_join_transaction()
                                                       --> gets transaction N

                                                     btrfs_commit_transaction(N)
                                                       --> set transaction state
                                                        to TRANTS_STATE_COMMIT_START

                                                                                             btrfs_first_prepared_delayed_node()
                                                                                               --> picks delayed node X through
                                                                                                   the prepared_list list

                                                       btrfs_run_delayed_items()

                                                         btrfs_first_delayed_node()
                                                           --> also picks delayed node X
                                                               but through the node_list
                                                               list

                                                         __btrfs_commit_inode_delayed_items()
                                                            --> runs all delayed items from
                                                                this node and drops the
                                                                node's item count to 0
                                                                through call to
                                                                btrfs_release_delayed_inode()

                                                         --> finishes running any remaining
                                                             delayed nodes

                                                       --> finishes transaction commit

                                                   --> stops cleaner and transaction threads

                                                   btrfs_free_fs_roots()
                                                     --> frees all roots and removes them
                                                         from the radix tree
                                                         fs_info->fs_roots_radix

                                                                                             btrfs_join_transaction()
                                                                                               start_transaction()
                                                                                                 btrfs_record_root_in_trans()
                                                                                                   record_root_in_trans()
                                                                                                     radix_tree_tag_set()
                                                                                                       --> crashes because
                                                                                                           the root is not in
                                                                                                           the radix tree
                                                                                                           anymore

If the worker is able to call btrfs_join_transaction() before the unmount
task frees the fs roots, we end up leaking a transaction and all its
resources, since after the call to btrfs_commit_super() and stopping the
transaction kthread, we don't expect to have any transaction open anymore.

When this situation happens the worker has a delayed node that has no
more items to run, since the task calling btrfs_run_delayed_items(),
which is doing a transaction commit, picks the same node and runs all
its items first.

We can not wait for the worker to complete when running delayed items
through btrfs_run_delayed_items(), because we call that function in
several phases of a transaction commit, and that could cause a deadlock
because the worker calls btrfs_join_transaction() and the task doing the
transaction commit may have already set the transaction state to
TRANS_STATE_COMMIT_DOING.

Also it's not possible to get into a situation where only some of the
items of a delayed node are added to the fs/subvolume tree in the current
transaction and the remaining ones in the next transaction, because when
running the items of a delayed inode we lock its mutex, effectively
waiting for the worker if the worker is running the items of the delayed
node already.

Since this can only cause issues when unmounting a filesystem, fix it in
a simple way by waiting for any jobs on the delayed workers queue before
calling btrfs_commit_supper() at close_ctree(). This works because at this
point no one can call btrfs_btree_balance_dirty() or
btrfs_balance_delayed_items(), and if we end up waiting for any worker to
complete, btrfs_commit_super() will commit the transaction created by the
worker.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/64/tm: Don't let userspace set regs->trap via sigreturn

commit c7def7fbdeaa25feaa19caf4a27c5d10bd8789e4 upstream.

In restore_tm_sigcontexts() we take the trap value directly from the
user sigcontext with no checking:

err |= __get_user(regs->trap, &sc->gp_regs[PT_TRAP]);

This means we can be in the kernel with an arbitrary regs->trap value.

Although that's not immediately problematic, there is a risk we could
trigger one of the uses of CHECK_FULL_REGS():

#define CHECK_FULL_REGS(regs) BUG_ON(regs->trap & 1)

It can also cause us to unnecessarily save non-volatile GPRs again in
save_nvgprs(), which shouldn't be problematic but is still wrong.

It's also possible it could trick the syscall restart machinery, which
relies on regs->trap not being == 0xc00 (see 9a81c16b5275 ("powerpc:
fix double syscall restarts")), though I haven't been able to make
that happen.

Finally it doesn't match the behaviour of the non-TM case, in
restore_sigcontext() which zeroes regs->trap.

So change restore_tm_sigcontexts() to zero regs->trap.

This was discovered while testing Nick's upcoming rewrite of the
syscall entry path. In that series the call to save_nvgprs() prior to
signal handling (do_notify_resume()) is removed, which leaves the
low-bit of regs->trap uncleared which can then trigger the FULL_REGS()
WARNs in setup_tm_sigcontexts().

Fixes: 2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context")
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200401023836.3286664-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata: Return correct status in sata_pmp_eh_recover_pm() when ATA_DFLAG_DETACH is set

commit 8305f72f952cff21ce8109dc1ea4b321c8efc5af upstream.

During system resume from suspend, this can be observed on ASM1062 PMP
controller:

ata10.01: SATA link down (SStatus 0 SControl 330)
ata10.02: hard resetting link
ata10.02: SATA link down (SStatus 0 SControl 330)
ata10.00: configured for UDMA/133
Kernel panic - not syncing: stack-protector: Kernel
 in: sata_pmp_eh_recover+0xa2b/0xa40

CPU: 2 PID: 230 Comm: scsi_eh_9 Tainted: P OE
#49-Ubuntu
Hardware name: System manufacturer System Product
 1001 12/10/2017
Call Trace:
dump_stack+0x63/0x8b
panic+0xe4/0x244
? sata_pmp_eh_recover+0xa2b/0xa40
__stack_chk_fail+0x19/0x20
sata_pmp_eh_recover+0xa2b/0xa40
? ahci_do_softreset+0x260/0x260 [libahci]
? ahci_do_hardreset+0x140/0x140 [libahci]
? ata_phys_link_offline+0x60/0x60
? ahci_stop_engine+0xc0/0xc0 [libahci]
sata_pmp_error_handler+0x22/0x30
ahci_error_handler+0x45/0x80 [libahci]
ata_scsi_port_error_handler+0x29b/0x770
? ata_scsi_cmd_error_handler+0x101/0x140
ata_scsi_error+0x95/0xd0
? scsi_try_target_reset+0x90/0x90
scsi_error_handler+0xd0/0x5b0
kthread+0x121/0x140
? scsi_eh_get_sense+0x200/0x200
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x22/0x40
Kernel Offset: 0xcc00000 from 0xffffffff81000000
(relocation range: 0xffffffff80000000-0xffffffffbfffffff)

Since sata_pmp_eh_recover_pmp() doens't set rc when ATA_DFLAG_DETACH is
set, sata_pmp_eh_recover() continues to run. During retry it triggers
the stack protector.

Set correct rc in sata_pmp_eh_recover_pmp() to let sata_pmp_eh_recover()
jump to pmp_fail directly.

BugLink: https://bugs.launchpad.net/bugs/1821434
Cc: stable@vger.kernel.org
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hfsplus: fix crash and filesystem corruption when deleting files

commit 25efb2ffdf991177e740b2f63e92b4ec7d310a92 upstream.

When removing files containing extended attributes, the hfsplus driver may
remove the wrong entries from the attributes b-tree, causing major
filesystem damage and in some cases even kernel crashes.

To remove a file, all its extended attributes have to be removed as well.
The driver does this by looking up all keys in the attributes b-tree with
the cnid of the file.  Each of these entries then gets deleted using the
key used for searching, which doesn't contain the attribute's name when it
should.  Since the key doesn't contain the name, the deletion routine will
not find the correct entry and instead remove the one in front of it.  If
parent nodes have to be modified, these become corrupt as well.  This
causes invalid links and unsorted entries that not even macOS's fsck_hfs
is able to fix.

To fix this, modify the search key before an entry is deleted from the
attributes b-tree by copying the found entry's key into the search key,
therefore ensuring that the correct entry gets removed from the tree.

Signed-off-by: Simon Gander <simon@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anton Altaparmakov <anton@tuxera.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200327155541.1521-1-simon@tuxera.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: powernv: Fix use-after-free

commit d0a72efac89d1c35ac55197895201b7b94c5e6ef upstream.

The cpufreq driver has a use-after-free that we can hit if:

a) There's an OCC message pending when the notifier is registered, and
b) The cpufreq driver fails to register with the core.

When a) occurs the notifier schedules a workqueue item to handle the
message. The backing work_struct is located on chips[].throttle and
when b) happens we clean up by freeing the array. Once we get to
the (now free) queued item and the kernel crashes.

Fixes: c5e29ea7ac14 ("cpufreq: powernv: Fix bugs in powernv_cpufreq_{init/exit}")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200206062622.28235-1-oohall@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kmod: make request_module() return an error when autoloading is disabled

commit d7d27cfc5cf0766a26a8f56868c5ad5434735126 upstream.

Patch series "module autoloading fixes and cleanups", v5.

This series fixes a bug where request_module() was reporting success to
kernel code when module autoloading had been completely disabled via
'echo > /proc/sys/kernel/modprobe'.

It also addresses the issues raised on the original thread
(https://lkml.kernel.org/lkml/20200310223731.126894-1-ebiggers@kernel.org/T/#u)
bydocumenting the modprobe sysctl, adding a self-test for the empty path
case, and downgrading a user-reachable WARN_ONCE().

This patch (of 4):

It's long been possible to disable kernel module autoloading completely
(while still allowing manual module insertion) by setting
/proc/sys/kernel/modprobe to the empty string.

This can be preferable to setting it to a nonexistent file since it
avoids the overhead of an attempted execve(), avoids potential
deadlocks, and avoids the call to security_kernel_module_request() and
thus on SELinux-based systems eliminates the need to write SELinux rules
to dontaudit module_request.

However, when module autoloading is disabled in this way,
request_module() returns 0.  This is broken because callers expect 0 to
mean that the module was successfully loaded.

Apparently this was never noticed because this method of disabling
module autoloading isn't used much, and also most callers don't use the
return value of request_module() since it's always necessary to check
whether the module registered its functionality or not anyway.

But improperly returning 0 can indeed confuse a few callers, for example
get_fs_type() in fs/filesystems.c where it causes a WARNING to be hit:

if (!fs && (request_module("fs-%.*s", len, name) == 0)) {
fs = __get_fs_type(name, len);
WARN_ONCE(!fs, "request_module fs-%.*s succeeded, but still no fs?\n", len, name);
}

This is easily reproduced with:

echo > /proc/sys/kernel/modprobe
mount -t NONEXISTENT none /

It causes:

request_module fs-NONEXISTENT succeeded, but still no fs?
WARNING: CPU: 1 PID: 1106 at fs/filesystems.c:275 get_fs_type+0xd6/0xf0
[...]

This should actually use pr_warn_once() rather than WARN_ONCE(), since
it's also user-reachable if userspace immediately unloads the module.
Regardless, request_module() should correctly return an error when it
fails.  So let's make it return -ENOENT, which matches the error when
the modprobe binary doesn't exist.

I've also sent patches to document and test this case.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Ben Hutchings <benh@debian.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200310223731.126894-1-ebiggers@kernel.org
Link: http://lkml.kernel.org/r/20200312202552.241885-1-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: i8042 - add Acer Aspire 5738z to nomux list

commit ebc68cedec4aead47d8d11623d013cca9bf8e825 upstream.

The Acer Aspire 5738z has a button to disable (and re-enable) the
touchpad next to the touchpad.

When this button is pressed a LED underneath indicates that the touchpad
is disabled (and an event is send to userspace and GNOME shows its
touchpad enabled / disable OSD thingie).

So far so good, but after re-enabling the touchpad it no longer works.

The laptop does not have an external ps2 port, so mux mode is not needed
and disabling mux mode fixes the touchpad no longer working after toggling
it off and back on again, so lets add this laptop model to the nomux list.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200331123947.318908-1-hdegoede@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/diag: fix display of diagnose call statistics

commit 6c7c851f1b666a8a455678a0b480b9162de86052 upstream.

Show the full diag statistic table and not just parts of it.

The issue surfaced in a KVM guest with a number of vcpus
defined smaller than NR_DIAG_STAT.

Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: no need try to truncate file beyond i_size

commit 783fda856e1034dee90a873f7654c418212d12d7 upstream.

Linux fallocate(2) with FALLOC_FL_PUNCH_HOLE mode set, its offset can
exceed the inode size.  Ocfs2 now doesn't allow that offset beyond inode
size.  This restriction is not necessary and violates fallocate(2)
semantics.

If fallocate(2) offset is beyond inode size, just return success and do
nothing further.

Otherwise, ocfs2 will crash the kernel.

  kernel BUG at fs/ocfs2//alloc.c:7264!
   ocfs2_truncate_inline+0x20f/0x360 [ocfs2]
   ocfs2_remove_inode_range+0x23c/0xcb0 [ocfs2]
   __ocfs2_change_file_space+0x4a5/0x650 [ocfs2]
   ocfs2_fallocate+0x83/0xa0 [ocfs2]
   vfs_fallocate+0x148/0x230
   SyS_fallocate+0x48/0x80
   do_syscall_64+0x79/0x170

Signed-off-by: Changwei Ge <chge@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200407082754.17565-1-chge@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix a data race at inode->i_blocks

commit 28936b62e71e41600bab319f262ea9f9b1027629 upstream.

inode->i_blocks could be accessed concurrently as noticed by KCSAN,

 BUG: KCSAN: data-race in ext4_do_update_inode [ext4] / inode_add_bytes

 write to 0xffff9a00d4b982d0 of 8 bytes by task 22100 on cpu 118:
  inode_add_bytes+0x65/0xf0
  __inode_add_bytes at fs/stat.c:689
  (inlined by) inode_add_bytes at fs/stat.c:702
  ext4_mb_new_blocks+0x418/0xca0 [ext4]
  ext4_ext_map_blocks+0x1a6b/0x27b0 [ext4]
  ext4_map_blocks+0x1a9/0x950 [ext4]
  _ext4_get_block+0xfc/0x270 [ext4]
  ext4_get_block_unwritten+0x33/0x50 [ext4]
  __block_write_begin_int+0x22e/0xae0
  __block_write_begin+0x39/0x50
  ext4_write_begin+0x388/0xb50 [ext4]
  ext4_da_write_begin+0x35f/0x8f0 [ext4]
  generic_perform_write+0x15d/0x290
  ext4_buffered_write_iter+0x11f/0x210 [ext4]
  ext4_file_write_iter+0xce/0x9e0 [ext4]
  new_sync_write+0x29c/0x3b0
  __vfs_write+0x92/0xa0
  vfs_write+0x103/0x260
  ksys_write+0x9d/0x130
  __x64_sys_write+0x4c/0x60
  do_syscall_64+0x91/0xb05
  entry_SYSCALL_64_after_hwframe+0x49/0xbe

 read to 0xffff9a00d4b982d0 of 8 bytes by task 8 on cpu 65:
  ext4_do_update_inode+0x4a0/0xf60 [ext4]
  ext4_inode_blocks_set at fs/ext4/inode.c:4815
  ext4_mark_iloc_dirty+0xaf/0x160 [ext4]
  ext4_mark_inode_dirty+0x129/0x3e0 [ext4]
  ext4_convert_unwritten_extents+0x253/0x2d0 [ext4]
  ext4_convert_unwritten_io_end_vec+0xc5/0x150 [ext4]
  ext4_end_io_rsv_work+0x22c/0x350 [ext4]
  process_one_work+0x54f/0xb90
  worker_thread+0x80/0x5f0
  kthread+0x1cd/0x1f0
  ret_from_fork+0x27/0x50

 4 locks held by kworker/u256:0/8:
  #0: ffff9a025abc4328 ((wq_completion)ext4-rsv-conversion){+.+.}, at: process_one_work+0x443/0xb90
  #1: ffffab5a862dbe20 ((work_completion)(&ei->i_rsv_conversion_work)){+.+.}, at: process_one_work+0x443/0xb90
  #2: ffff9a025a9d0f58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
  #3: ffff9a00d4b985d8 (&(&ei->i_raw_lock)->rlock){+.+.}, at: ext4_do_update_inode+0xaa/0xf60 [ext4]
 irq event stamp: 3009267
 hardirqs last  enabled at (3009267): [<ffffffff980da9b7>] __find_get_block+0x107/0x790
 hardirqs last disabled at (3009266): [<ffffffff980da8f9>] __find_get_block+0x49/0x790
 softirqs last  enabled at (3009230): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c
 softirqs last disabled at (3009223): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0

 Reported by Kernel Concurrency Sanitizer on:
 CPU: 65 PID: 8 Comm: kworker/u256:0 Tainted: G L 5.6.0-rc2-next-20200221+ #7
 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
 Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work [ext4]

The plain read is outside of inode->i_lock critical section which
results in a data race. Fix it by adding READ_ONCE() there.

Link: https://lore.kernel.org/r/20200222043258.2279-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: omap: Use define directive for PIN_CONFIG_ACTIVE_HIGH

commit c50156526a2f7176b50134e3e5fb108ba09791b2 upstream.

Clang warns when one enumerated type is implicitly converted to another:

drivers/rtc/rtc-omap.c:574:21: warning: implicit conversion from
enumeration type 'enum rtc_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
        {"ti,active-high", PIN_CONFIG_ACTIVE_HIGH, 0},
        ~                  ^~~~~~~~~~~~~~~~~~~~~~
drivers/rtc/rtc-omap.c:579:12: warning: implicit conversion from
enumeration type 'enum rtc_pin_config_param' to different enumeration
type 'enum pin_config_param' [-Wenum-conversion]
        PCONFDUMP(PIN_CONFIG_ACTIVE_HIGH, "input active high", NULL, false),
        ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/pinctrl/pinconf-generic.h:163:11: note: expanded from
macro 'PCONFDUMP'
        .param = a, .display = b, .format = c, .has_arg = d     \
                 ^
2 warnings generated.

It is expected that pinctrl drivers can extend pin_config_param because
of the gap between PIN_CONFIG_END and PIN_CONFIG_MAX so this conversion
isn't an issue. Most drivers that take advantage of this define the
PIN_CONFIG variables as constants, rather than enumerated values. Do the
same thing here so that Clang no longer warns.

Link: https://github.com/ClangBuiltLinux/linux/issues/144
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: armv8_deprecated: Fix undef_hook mask for thumb setend

commit fc2266011accd5aeb8ebc335c381991f20e26e33 upstream.

For thumb instructions, call_undef_hook() in traps.c first reads a u16,
and if the u16 indicates a T32 instruction (u16 >= 0xe800), a second
u16 is read, which then makes up the the lower half-word of a T32
instruction. For T16 instructions, the second u16 is not read,
which makes the resulting u32 opcode always have the upper half set to
0.

However, having the upper half of instr_mask in the undef_hook set to 0
masks out the upper half of all thumb instructions - both T16 and T32.
This results in trapped T32 instructions with the lower half-word equal
to the T16 encoding of setend (b650) being matched, even though the upper
half-word is not 0000 and thus indicates a T32 opcode.

An example of such a T32 instruction is eaa0b650, which should raise a
SIGILL since T32 instructions with an eaa prefix are unallocated as per
Arm ARM, but instead works as a SETEND because the second half-word is set
to b650.

This patch fixes the issue by extending instr_mask to include the
upper u32 half, which will still match T16 instructions where the upper
half is 0, but not T32 instructions.

Fixes: 2d888f48e056 ("arm64: Emulate SETEND for AArch32 tasks")
Cc: <stable@vger.kernel.org> # 4.0.x-
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Fredrik Strupe <fredrik@strupe.net>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: zfcp: fix missing erp_lock in port recovery trigger for point-to-point

commit 819732be9fea728623e1ed84eba28def7384ad1f upstream.

v2.6.27 commit cc8c282963bd ("[SCSI] zfcp: Automatically attach remote
ports") introduced zfcp automatic port scan.

Before that, the user had to use the sysfs attribute "port_add" of an FCP
device (adapter) to add and open remote (target) ports, even for the remote
peer port in point-to-point topology. That code path did a proper port open
recovery trigger taking the erp_lock.

Since above commit, a new helper function zfcp_erp_open_ptp_port()
performed an UNlocked port open recovery trigger. This can race with other
parallel recovery triggers. In zfcp_erp_action_enqueue() this could corrupt
e.g. adapter->erp_total_count or adapter->erp_ready_head.

As already found for fabric topology in v4.17 commit fa89adba1941 ("scsi:
zfcp: fix infinite iteration on ERP ready list"), there was an endless loop
during tracing of rport (un)block.  A subsequent v4.18 commit 9e156c54ace3
("scsi: zfcp: assert that the ERP lock is held when tracing a recovery
trigger") introduced a lockdep assertion for that case.

As a side effect, that lockdep assertion now uncovered the unlocked code
path for PtP. It is from within an adapter ERP action:

zfcp_erp_strategy[1479]  intentionally DROPs erp lock around
                         zfcp_erp_strategy_do_action()
zfcp_erp_strategy_do_action[1441]      NO erp lock
zfcp_erp_adapter_strategy[876]         NO erp lock
zfcp_erp_adapter_strategy_open[855]    NO erp lock
zfcp_erp_adapter_strategy_open_fsf[806]NO erp lock
zfcp_erp_adapter_strat_fsf_xconf[772]  erp lock only around
                                       zfcp_erp_action_to_running(),
                                       BUT *_not_* around
                                       zfcp_erp_enqueue_ptp_port()
zfcp_erp_enqueue_ptp_port[728]         BUG: *_not_* taking erp lock
_zfcp_erp_port_reopen[432]             assumes to be called with erp lock
zfcp_erp_action_enqueue[314]           assumes to be called with erp lock
zfcp_dbf_rec_trig[288]                 _checks_ to be called with erp lock:
lockdep_assert_held(&adapter->erp_lock);

It causes the following lockdep warning:

WARNING: CPU: 2 PID: 775 at drivers/s390/scsi/zfcp_dbf.c:288
                            zfcp_dbf_rec_trig+0x16a/0x188
no locks held by zfcperp0.0.17c0/775.

Fix this by using the proper locked recovery trigger helper function.

Link: https://lore.kernel.org/r/20200312174505.51294-2-maier@linux.ibm.com
Fixes: cc8c282963bd ("[SCSI] zfcp: Automatically attach remote ports")
Cc: <stable@vger.kernel.org> #v2.6.27+
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm verity fec: fix memory leak in verity_fec_dtr

commit 75fa601934fda23d2f15bf44b09c2401942d8e15 upstream.

Fix below kmemleak detected in verity_fec_ctr. output_pool is
allocated for each dm-verity-fec device. But it is not freed when
dm-table for the verity target is removed. Hence free the output
mempool in destructor function verity_fec_dtr.

unreferenced object 0xffffffffa574d000 (size 4096):
  comm "init", pid 1667, jiffies 4294894890 (age 307.168s)
  hex dump (first 32 bytes):
    8e 36 00 98 66 a8 0b 9b 00 00 00 00 00 00 00 00  .6..f...........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<0000000060e82407>] __kmalloc+0x2b4/0x340
    [<00000000dd99488f>] mempool_kmalloc+0x18/0x20
    [<000000002560172b>] mempool_init_node+0x98/0x118
    [<000000006c3574d2>] mempool_init+0x14/0x20
    [<0000000008cb266e>] verity_fec_ctr+0x388/0x3b0
    [<000000000887261b>] verity_ctr+0x87c/0x8d0
    [<000000002b1e1c62>] dm_table_add_target+0x174/0x348
    [<000000002ad89eda>] table_load+0xe4/0x328
    [<000000001f06f5e9>] dm_ctl_ioctl+0x3b4/0x5a0
    [<00000000bee5fbb7>] do_vfs_ioctl+0x5dc/0x928
    [<00000000b475b8f5>] __arm64_sys_ioctl+0x70/0x98
    [<000000005361e2e8>] el0_svc_common+0xa0/0x158
    [<000000001374818f>] el0_svc_handler+0x6c/0x88
    [<000000003364e9f4>] el0_svc+0x8/0xc
    [<000000009d84cec9>] 0xffffffffffffffff

Fixes: a739ff3f543af ("dm verity: add support for forward error correction")
Depends-on: 6f1c819c219f7 ("dm: convert to bioset_init()/mempool_init()")
Cc: stable@vger.kernel.org
Signed-off-by: Harshini Shetty <harshini.x.shetty@sony.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: Use fixed constant in page_frag_alloc instead of size + 1

commit 8644772637deb121f7ac2df690cbf83fa63d3b70 upstream.

This patch replaces the size + 1 value introduced with the recent fix for 1
byte allocs with a constant value.

The idea here is to reduce code overhead as the previous logic would have
to read size into a register, then increment it, and write it back to
whatever field was being used. By using a constant we can avoid those
memory reads and arithmetic operations in favor of just encoding the
maximum value into the operation itself.

Fixes: 2c2ade81741c ("mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocs")
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools: gpio: Fix out-of-tree build regression

commit 82f04bfe2aff428b063eefd234679b2d693228ed upstream.

Commit 0161a94e2d1c7 ("tools: gpio: Correctly add make dependencies for
gpio_utils") added a make rule for gpio-utils-in.o but used $(output)
instead of the correct $(OUTPUT) for the output directory, breaking
out-of-tree build (O=xx) with the following error:

  No rule to make target 'out/tools/gpio/gpio-utils-in.o', needed by 'out/tools/gpio/lsgpio-in.o'.  Stop.

Fix that.

Fixes: 0161a94e2d1c ("tools: gpio: Correctly add make dependencies for gpio_utils")
Cc: <stable@vger.kernel.org>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Link: https://lore.kernel.org/r/20200325103154.32235-1-anssi.hannula@bitwise.fi
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Remove redundant arch_smt_update() invocation

commit 34d66caf251df91ff27b24a3a786810d29989eca upstream.

With commit a74cfffb03b7 ("x86/speculation: Rework SMT state change"),
arch_smt_update() is invoked from each individual CPU hotplug function.

Therefore the extra arch_smt_update() call in the sysfs SMT control is
redundant.

Fixes: a74cfffb03b7 ("x86/speculation: Rework SMT state change")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <konrad.wilk@oracle.com>
Cc: <dwmw@amazon.co.uk>
Cc: <bp@suse.de>
Cc: <srinivas.eeda@oracle.com>
Cc: <peterz@infradead.org>
Cc: <hpa@zytor.com>
Link: https://lkml.kernel.org/r/e2e064f2-e8ef-42ca-bf4f-76b612964752@default
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Initialize power_state field properly

commit 183ab39eb0ea9879bb68422a83e65f750f3192f0 upstream.

The recent commit 98081ca62cba ("ALSA: hda - Record the current power
state before suspend/resume calls") made the HD-audio driver to store
the PM state in power_state field.  This forgot, however, the
initialization at power up.  Although the codec drivers usually don't
need to refer to this field in the normal operation, let's initialize
it properly for consistency.

Fixes: 98081ca62cba ("ALSA: hda - Record the current power state before suspend/resume calls")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: mxs-dcp - fix scatterlist linearization for hash

commit fa03481b6e2e82355c46644147b614f18c7a8161 upstream.

The incorrect traversal of the scatterlist, during the linearization phase
lead to computing the hash value of the wrong input buffer.
New implementation uses scatterwalk_map_and_copy()
to address this issue.

Cc: <stable@vger.kernel.org>
Fixes: 15b59e7c3733 ("crypto: mxs - Add Freescale MXS DCP driver")
Signed-off-by: Rosioru Dragos <dragos.rosioru@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: drop block from cache on error in relocation

commit 8e19c9732ad1d127b5575a10f4fbcacf740500ff upstream.

If we have an error while building the backref tree in relocation we'll
process all the pending edges and then free the node.  However if we
integrated some edges into the cache we'll lose our link to those edges
by simply freeing this node, which means we'll leak memory and
references to any roots that we've found.

Instead we need to use remove_backref_node(), which walks through all of
the edges that are still linked to this node and free's them up and
drops any root references we may be holding.

CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: fix crash cleanup when KVM wasn't used

commit dbef2808af6c594922fe32833b30f55f35e9da6d upstream.

If KVM wasn't used at all before we crash the cleanup procedure fails with
 BUG: unable to handle page fault for address: ffffffffffffffc8
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 23215067 P4D 23215067 PUD 23217067 PMD 0
 Oops: 0000 [#8] SMP PTI
 CPU: 0 PID: 3542 Comm: bash Kdump: loaded Tainted: G      D           5.6.0-rc2+ #823
 RIP: 0010:crash_vmclear_local_loaded_vmcss.cold+0x19/0x51 [kvm_intel]

The root cause is that loaded_vmcss_on_cpu list is not yet initialized,
we initialize it in hardware_enable() but this only happens when we start
a VM.

Previously, we used to have a bitmap with enabled CPUs and that was
preventing [masking] the issue.

Initialized loaded_vmcss_on_cpu list earlier, right before we assign
crash_vmclear_loaded_vmcss pointer. blocked_vcpu_on_cpu list and
blocked_vcpu_on_cpu_lock are moved altogether for consistency.

Fixes: 31603d4fc2bb ("KVM: VMX: Always VMCLEAR in-use VMCSes during crash with kexec support")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200401081348.1345307-1-vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: Always VMCLEAR in-use VMCSes during crash with kexec support

commit 31603d4fc2bb4f0815245d496cb970b27b4f636a upstream.

VMCLEAR all in-use VMCSes during a crash, even if kdump's NMI shootdown
interrupted a KVM update of the percpu in-use VMCS list.

Because NMIs are not blocked by disabling IRQs, it's possible that
crash_vmclear_local_loaded_vmcss() could be called while the percpu list
of VMCSes is being modified, e.g. in the middle of list_add() in
vmx_vcpu_load_vmcs().  This potential corner case was called out in the
original commit[*], but the analysis of its impact was wrong.

Skipping the VMCLEARs is wrong because it all but guarantees that a
loaded, and therefore cached, VMCS will live across kexec and corrupt
memory in the new kernel.  Corruption will occur because the CPU's VMCS
cache is non-coherent, i.e. not snooped, and so the writeback of VMCS
memory on its eviction will overwrite random memory in the new kernel.
The VMCS will live because the NMI shootdown also disables VMX, i.e. the
in-progress VMCLEAR will #UD, and existing Intel CPUs do not flush the
VMCS cache on VMXOFF.

Furthermore, interrupting list_add() and list_del() is safe due to
crash_vmclear_local_loaded_vmcss() using forward iteration.  list_add()
ensures the new entry is not visible to forward iteration unless the
entire add completes, via WRITE_ONCE(prev->next, new).  A bad "prev"
pointer could be observed if the NMI shootdown interrupted list_del() or
list_add(), but list_for_each_entry() does not consume ->prev.

In addition to removing the temporary disabling of VMCLEAR, open code
loaded_vmcs_init() in __loaded_vmcs_clear() and reorder VMCLEAR so that
the VMCS is deleted from the list only after it's been VMCLEAR'd.
Deleting the VMCS before VMCLEAR would allow a race where the NMI
shootdown could arrive between list_del() and vmcs_clear() and thus
neither flow would execute a successful VMCLEAR.  Alternatively, more
code could be moved into loaded_vmcs_init(), but that gets rather silly
as the only other user, alloc_loaded_vmcs(), doesn't need the smp_wmb()
and would need to work around the list_del().

Update the smp_*() comments related to the list manipulation, and
opportunistically reword them to improve clarity.

[*] https://patchwork.kernel.org/patch/1675731/#3720461

Fixes: 8f536b7697a0 ("KVM: VMX: provide the vmclear function and a bitmap to support VMCLEAR in kdump")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200321193751.24985-2-sean.j.christopherson@intel.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Allocate new rmap and large page tracking when moving memslot

commit edd4fa37baa6ee8e44dc65523b27bd6fe44c94de upstream.

Reallocate a rmap array and recalcuate large page compatibility when
moving an existing memslot to correctly handle the alignment properties
of the new memslot.  The number of rmap entries required at each level
is dependent on the alignment of the memslot's base gfn with respect to
that level, e.g. moving a large-page aligned memslot so that it becomes
unaligned will increase the number of rmap entries needed at the now
unaligned level.

Not updating the rmap array is the most obvious bug, as KVM accesses
garbage data beyond the end of the rmap.  KVM interprets the bad data as
pointers, leading to non-canonical #GPs, unexpected #PFs, etc...

  general protection fault: 0000 [#1] SMP
  CPU: 0 PID: 1909 Comm: move_memory_reg Not tainted 5.4.0-rc7+ #139
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:rmap_get_first+0x37/0x50 [kvm]
  Code: <48> 8b 3b 48 85 ff 74 ec e8 6c f4 ff ff 85 c0 74 e3 48 89 d8 5b c3
  RSP: 0018:ffffc9000021bbc8 EFLAGS: 00010246
  RAX: ffff00617461642e RBX: ffff00617461642e RCX: 0000000000000012
  RDX: ffff88827400f568 RSI: ffffc9000021bbe0 RDI: ffff88827400f570
  RBP: 0010000000000000 R08: ffffc9000021bd00 R09: ffffc9000021bda8
  R10: ffffc9000021bc48 R11: 0000000000000000 R12: 0030000000000000
  R13: 0000000000000000 R14: ffff88827427d700 R15: ffffc9000021bce8
  FS:  00007f7eda014700(0000) GS:ffff888277a00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f7ed9216ff8 CR3: 0000000274391003 CR4: 0000000000162eb0
  Call Trace:
   kvm_mmu_slot_set_dirty+0xa1/0x150 [kvm]
   __kvm_set_memory_region.part.64+0x559/0x960 [kvm]
   kvm_set_memory_region+0x45/0x60 [kvm]
   kvm_vm_ioctl+0x30f/0x920 [kvm]
   do_vfs_ioctl+0xa1/0x620
   ksys_ioctl+0x66/0x70
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x4c/0x170
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f7ed9911f47
  Code: <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 21 6f 2c 00 f7 d8 64 89 01 48
  RSP: 002b:00007ffc00937498 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 0000000001ab0010 RCX: 00007f7ed9911f47
  RDX: 0000000001ab1350 RSI: 000000004020ae46 RDI: 0000000000000004
  RBP: 000000000000000a R08: 0000000000000000 R09: 00007f7ed9214700
  R10: 00007f7ed92149d0 R11: 0000000000000246 R12: 00000000bffff000
  R13: 0000000000000003 R14: 00007f7ed9215000 R15: 0000000000000000
  Modules linked in: kvm_intel kvm irqbypass
  ---[ end trace 0c5f570b3358ca89 ]---

The disallow_lpage tracking is more subtle.  Failure to update results
in KVM creating large pages when it shouldn't, either due to stale data
or again due to indexing beyond the end of the metadata arrays, which
can lead to memory corruption and/or leaking data to guest/userspace.

Note, the arrays for the old memslot are freed by the unconditional call
to kvm_free_memslot() in __kvm_set_memory_region().

Fixes: 05da45583de9b ("KVM: MMU: large page support")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: vsie: Fix delivery of addressing exceptions

commit 4d4cee96fb7a3cc53702a9be8299bf525be4ee98 upstream.

Whenever we get an -EFAULT, we failed to read in guest 2 physical
address space. Such addressing exceptions are reported via a program
intercept to the nested hypervisor.

We faked the intercept, we have to return to guest 2. Instead, right
now we would be returning -EFAULT from the intercept handler, eventually
crashing the VM.
the correct thing to do is to return 1 as rc == 1 is the internal
representation of "we have to go back into g2".

Addressing exceptions can only happen if the g2->g3 page tables
reference invalid g2 addresses (say, either a table or the final page is
not accessible - so something that basically never happens in sane
environments.

Identified by manual code inspection.

Fixes: a3508fbe9dc6 ("KVM: s390: vsie: initial support for nested virtualization")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200403153050.20569-3-david@redhat.com
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[borntraeger@de.ibm.com: fix patch description]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: vsie: Fix region 1 ASCE sanity shadow address checks

commit a1d032a49522cb5368e5dfb945a85899b4c74f65 upstream.

In case we have a region 1 the following calculation
(31 + ((gmap->asce & _ASCE_TYPE_MASK) >> 2)*11)
results in 64. As shifts beyond the size are undefined the compiler is
free to use instructions like sllg. sllg will only use 6 bits of the
shift value (here 64) resulting in no shift at all. That means that ALL
addresses will be rejected.

The can result in endless loops, e.g. when prefix cannot get mapped.

Fixes: 4be130a08420 ("s390/mm: add shadow gmap support")
Tested-by: Janosch Frank <frankja@linux.ibm.com>
Reported-by: Janosch Frank <frankja@linux.ibm.com>
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200403153050.20569-2-david@redhat.com
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
[borntraeger@de.ibm.com: fix patch description, remove WARN_ON_ONCE]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/32: Add missing ASM_CLAC to general_protection entry

commit 3d51507f29f2153a658df4a0674ec5b592b62085 upstream.

All exception entry points must have ASM_CLAC right at the
beginning. The general_protection entry is missing one.

Fixes: e59d1b0a2419 ("x86-32, smap: Add STAC/CLAC instructions to 32-bit kernel entry")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200225220216.219537887@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

signal: Extend exec_id to 64bits

commit d1e7fd6462ca9fc76650fbe6ca800e35b24267da upstream.

Replace the 32bit exec_id with a 64bit exec_id to make it impossible
to wrap the exec_id counter.  With care an attacker can cause exec_id
wrap and send arbitrary signals to a newly exec'd parent.  This
bypasses the signal sending checks if the parent changes their
credentials during exec.

The severity of this problem can been seen that in my limited testing
of a 32bit exec_id it can take as little as 19s to exec 65536 times.
Which means that it can take as little as 14 days to wrap a 32bit
exec_id.  Adam Zabrocki has succeeded wrapping the self_exe_id in 7
days.  Even my slower timing is in the uptime of a typical server.
Which means self_exec_id is simply a speed bump today, and if exec
gets noticably faster self_exec_id won't even be a speed bump.

Extending self_exec_id to 64bits introduces a problem on 32bit
architectures where reading self_exec_id is no longer atomic and can
take two read instructions.  Which means that is is possible to hit
a window where the read value of exec_id does not match the written
value.  So with very lucky timing after this change this still
remains expoiltable.

I have updated the update of exec_id on exec to use WRITE_ONCE
and the read of exec_id in do_notify_parent to use READ_ONCE
to make it clear that there is no locking between these two
locations.

Link: https://lore.kernel.org/kernel-hardening/20200324215049.GA3710@pi3.com.pl
Fixes: 2.3.23pre2
Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k: Handle txpower changes even when TPC is disabled

commit 968ae2caad0782db5dbbabb560d3cdefd2945d38 upstream.

When TPC is disabled IEEE80211_CONF_CHANGE_POWER event can be handled to
reconfigure HW's maximum txpower.

This fixes 0dBm txpower setting when user attaches to an interface for
the first time with the following scenario:

ieee80211_do_open()
    ath9k_add_interface()
        ath9k_set_txpower() /* Set TX power with not yet initialized
                               sc->hw->conf.power_level */

    ieee80211_hw_config() /* Iniatilize sc->hw->conf.power_level and
                             raise IEEE80211_CONF_CHANGE_POWER */

    ath9k_config() /* IEEE80211_CONF_CHANGE_POWER is ignored */

This issue can be reproduced with the following:

  $ modprobe -r ath9k
  $ modprobe ath9k
  $ wpa_supplicant -i wlan0 -c /tmp/wpa.conf &
  $ iw dev /* Here TX power is either 0 or 3 depending on RF chain */
  $ killall wpa_supplicant
  $ iw dev /* TX power goes back to calibrated value and subsequent
              calls will be fine */

Fixes: 283dd11994cde ("ath9k: add per-vif TX power capability")
Cc: stable@vger.kernel.org
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MIPS: OCTEON: irq: Fix potential NULL pointer dereference

commit 792a402c2840054533ef56279c212ef6da87d811 upstream.

There is a potential NULL pointer dereference in case kzalloc()
fails and returns NULL.

Fix this by adding a NULL check on *cd*

This bug was detected with the help of Coccinelle.

Fixes: 64b139f97c01 ("MIPS: OCTEON: irq: add CIB and other fixes")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/versatile-fpga: Apply clear-mask earlier

commit 6a214a28132f19ace3d835a6d8f6422ec80ad200 upstream.

Clear its own IRQs before the parent IRQ get enabled, so that the
remaining IRQs do not accidentally interrupt the parent IRQ controller.

This patch also fixes a reboot bug on OX820 SoC, where the remaining
rps-timer IRQ raises a GIC interrupt that is left pending. After that,
the rps-timer IRQ is cleared during driver initialization, and there's
no IRQ left in rps-irq when local_irq_enable() is called, which evokes
an error message "unexpected IRQ trap".

Fixes: bdd272cbb97a ("irqchip: versatile FPGA: support cascaded interrupts from DT")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200321133842.2408823-1-mans0n@gorani.run
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: reaching the keys quotas correctly

commit 2e356101e72ab1361821b3af024d64877d9a798d upstream.

Currently, when we add a new user key, the calltrace as below:

add_key()
  key_create_or_update()
    key_alloc()
    __key_instantiate_and_link
      generic_key_instantiate
        key_payload_reserve
          ......

Since commit a08bf91ce28e ("KEYS: allow reaching the keys quotas exactly"),
we can reach max bytes/keys in key_alloc, but we forget to remove this
limit when we reserver space for payload in key_payload_reserve. So we
can only reach max keys but not max bytes when having delta between plen
and type->def_datalen. Remove this limit when instantiating the key, so we
can keep consistent with key_alloc.

Also, fix the similar problem in keyctl_chown_key().

Fixes: 0b77f5bfb45c ("keys: make the keyring quotas controllable through /proc/sys")
Fixes: a08bf91ce28e ("KEYS: allow reaching the keys quotas exactly")
Cc: stable@vger.kernel.org # 5.0.x
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n

commit 3f5b9959041e0db6dacbea80bb833bff5900999f upstream.

When CONFIG_DEVFREQ_THERMAL is disabled all functions except
of_devfreq_cooling_register_power() were already inlined. Also inline
the last function to avoid compile errors when multiple drivers call
of_devfreq_cooling_register_power() when CONFIG_DEVFREQ_THERMAL is not
set. Compilation failed with the following message:
  multiple definition of `of_devfreq_cooling_register_power'
(which then lists all usages of of_devfreq_cooling_register_power())

Thomas Zimmermann reported this problem [0] on a kernel config with
CONFIG_DRM_LIMA={m,y}, CONFIG_DRM_PANFROST={m,y} and
CONFIG_DEVFREQ_THERMAL=n after both, the lima and panfrost drivers
gained devfreq cooling support.

[0] https://www.spinics.net/lists/dri-devel/msg252825.html

Fixes: a76caf55e5b356 ("thermal: Add devfreq cooling")
Cc: stable@vger.kernel.org
Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200403205133.1101808-1-martin.blumenstingl@googlemail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

acpi/x86: ignore unspecified bit positions in the ACPI global lock field

commit ecb9c790999fd6c5af0f44783bd0217f0b89ec2b upstream.

The value in "new" is constructed from "old" such that all bits defined
as reserved by the ACPI spec[1] are left untouched. But if those bits
do not happen to be all zero, "new < 3" will not evaluate to true.

The firmware of the laptop(s) Medion MD63490 / Akoya P15648 comes with
garbage inside the "FACS" ACPI table. The starting value is
old=0x4944454d, therefore new=0x4944454e, which is >= 3. Mask off
the reserved bits.

[1] https://uefi.org/sites/default/files/resources/ACPI_6_2.pdf

Link: https://bugzilla.kernel.org/show_bug.cgi?id=206553
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ti-vpe: cal: fix disable_irqs to only the intended target

commit 1db56284b9da9056093681f28db48a09a243274b upstream.

disable_irqs() was mistakenly disabling all interrupts when called.
This cause all port stream to stop even if only stopping one of them.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: oss: Fix regression by buffer overflow fix

commit ae769d3556644888c964635179ef192995f40793 upstream.

The recent fix for the OOB access in PCM OSS plugins (commit
f2ecf903ef06: "ALSA: pcm: oss: Avoid plugin buffer overflow") caused a
regression on OSS applications.  The patch introduced the size check
in client and slave size calculations to limit to each plugin's buffer
size, but I overlooked that some code paths call those without
allocating the buffer but just for estimation.

This patch fixes the bug by skipping the size check for those code
paths while keeping checking in the actual transfer calls.

Fixes: f2ecf903ef06 ("ALSA: pcm: oss: Avoid plugin buffer overflow")
Tested-and-reported-by: Jari Ruusu <jari.ruusu@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200403072515.25539-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: ice1724: Fix invalid access for enumerated ctl items

commit c47914c00be346bc5b48c48de7b0da5c2d1a296c upstream.

The access to Analog Capture Source control value implemented in
prodigy_hifi.c is wrong, as caught by the recently introduced sanity
check; it should be accessing value.enumerated.item[] instead of
value.integer.value[].  This patch corrects the wrong access pattern.

Fixes: 6b8d6e5518e2 ("[ALSA] ICE1724: Added support for Audiotrak Prodigy 7.1 HiFi & HD2, Hercules Fortissimo IV")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207139
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200407084402.25589-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Fix potential access overflow in beep helper

commit 0ad3f0b384d58f3bd1f4fb87d0af5b8f6866f41a upstream.

The beep control helper function blindly stores the values in two
stereo channels no matter whether the actual control is mono or
stereo.  This is practically harmless, but it annoys the recently
introduced sanity check, resulting in an error when the checker is
enabled.

This patch corrects the behavior to store only on the defined array
member.

Fixes: 0401e8548eac ("ALSA: hda - Move beep helper functions to hda_beep.c")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207139
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200407084402.25589-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Add driver blacklist

commit 3c6fd1f07ed03a04debbb9a9d782205f1ef5e2ab upstream.

The recent AMD platform exposes an HD-audio bus but without any actual
codecs, which is internally tied with a USB-audio device, supposedly.
It results in "no codecs" error of HD-audio bus driver, and it's
nothing but a waste of resources.

This patch introduces a static blacklist table for skipping such a
known bogus PCI SSID entry.  As of writing this patch, the known SSIDs
are:
* 1043:874f - ASUS ROG Zenith II / Strix
* 1462:cb59 - MSI TRX40 Creator
* 1462:cb60 - MSI TRX40

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206543
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200408140449.22319-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add mixer workaround for TRX40 and co

commit 2a48218f8e23d47bd3e23cfdfb8aa9066f7dc3e6 upstream.

Some recent boards (supposedly with a new AMD platform) contain the
USB audio class 2 device that is often tied with HD-audio.  The device
exposes an Input Gain Pad control (id=19, control=12) but this node
doesn't behave correctly, returning an error for each inquiry of
GET_MIN and GET_MAX that should have been mandatory.

As a workaround, simply ignore this node by adding a usbmix_name_map
table entry.  The currently known devices are:
* 0414:a002 - Gigabyte TRX40 Aorus Pro WiFi
* 0b05:1916 - ASUS ROG Zenith II
* 0b05:1917 - ASUS ROG Strix
* 0db0:0d64 - MSI TRX40 Creator
* 0db0:543d - MSI TRX40

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206543
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200408140449.22319-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: composite: Inform controller driver of self-powered

commit 5e5caf4fa8d3039140b4548b6ab23dd17fce9b2c upstream.

Different configuration/condition may draw different power. Inform the
controller driver of the change so it can respond properly (e.g.
GET_STATUS request). This fixes an issue with setting MaxPower from
configfs. The composite driver doesn't check this value when setting
self-powered.

Cc: stable@vger.kernel.org
Fixes: 88af8bbe4ef7 ("usb: gadget: the start of the configfs interface")
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_fs: Fix use after free issue as part of queue failure

commit f63ec55ff904b2f2e126884fcad93175f16ab4bb upstream.

In AIO case, the request is freed up if ep_queue fails.
However, io_data->req still has the reference to this freed
request. In the case of this failure if there is aio_cancel
call on this io_data it will lead to an invalid dequeue
operation and a potential use after free issue.
Fix this by setting the io_data->req to NULL when the request
is freed as part of queue failure.

Fixes: 2e4c7553cd6f ("usb: gadget: f_fs: add aio support")
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
CC: stable <stable@vger.kernel.org>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200326115620.12571-1-sallenki@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: topology: use name_prefix for new kcontrol

commit abca9e4a04fbe9c6df4d48ca7517e1611812af25 upstream.

Current topology doesn't add prefix of component to new kcontrol.

Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/009b01d60804$ae25c2d0$0a714870$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: dpcm: allow start or stop during pause for backend

commit 21fca8bdbb64df1297e8c65a746c4c9f4a689751 upstream.

soc_compr_trigger_fe() allows start or stop after pause_push.
In dpcm_be_dai_trigger(), however, only pause_release is allowed
command after pause_push.
So, start or stop after pause in compress offload is always
returned as error if the compress offload is used with dpcm.
To fix the problem, SND_SOC_DPCM_STATE_PAUSED should be allowed
for start or stop command.

Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/004d01d607c1$7a3d5250$6eb7f6f0$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: dapm: connect virtual mux with default value

commit 3bbbb7728fc853d71dbce4073fef9f281fbfb4dd upstream.

Since a virtual mixer has no backing registers
to decide which path to connect,
it will try to match with initial state.
This is to ensure that the default mixer choice will be
correctly powered up during initialization.
Invert flag is used to select initial state of the virtual switch.
Since actual hardware can't be disconnected by virtual switch,
connected is better choice as initial state in many cases.

Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/01a301d60731$b724ea10$256ebe30$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: fix regwmask

commit 0ab070917afdc93670c2d0ea02ab6defb6246a7c upstream.

If regwshift is 32 and the selected architecture compiles '<<' operator
for signed int literal into rotating shift, '1<<regwshift' became 1 and
it makes regwmask to 0x0.
The literal is set to unsigned long to get intended regwmask.

Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/001001d60665$db7af3e0$9270dba0$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: rtsx: set correct pcr_ops for rts522A

[ Upstream commit 10cea23b6aae15e8324f4101d785687f2c514fe5 ]

rts522a should use rts522a_pcr_ops, which is
diffrent with rts5227 in phy/hw init setting.

Fixes: ce6a5acc9387 ("mfd: rtsx: Add support for rts522A")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200326032618.20472-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: track reloc roots based on their commit root bytenr

[ Upstream commit ea287ab157c2816bf12aad4cece41372f9d146b4 ]

We always search the commit root of the extent tree for looking up back
references, however we track the reloc roots based on their current
bytenr.

This is wrong, if we commit the transaction between relocating tree
blocks we could end up in this code in build_backref_tree

  if (key.objectid == key.offset) {
  /*
   * Only root blocks of reloc trees use backref
   * pointing to itself.
   */
  root = find_reloc_root(rc, cur->bytenr);
  ASSERT(root);
  cur->root = root;
  break;
  }

find_reloc_root() is looking based on the bytenr we had in the commit
root, but if we've COWed this reloc root we will not find that bytenr,
and we will trip over the ASSERT(root).

Fix this by using the commit_root->start bytenr for indexing the commit
root.  Then we change the __update_reloc_root() caller to be used when
we switch the commit root for the reloc root during commit.

This fixes the panic I was seeing when we started throttling relocation
for delayed refs.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: remove a BUG_ON() from merge_reloc_roots()

[ Upstream commit 7b7b74315b24dc064bc1c683659061c3d48f8668 ]

This was pretty subtle, we default to reloc roots having 0 root refs, so
if we crash in the middle of the relocation they can just be deleted.
If we successfully complete the relocation operations we'll set our root
refs to 1 in prepare_to_merge() and then go on to merge_reloc_roots().

At prepare_to_merge() time if any of the reloc roots have a 0 reference
still, we will remove that reloc root from our reloc root rb tree, and
then clean it up later.

However this only happens if we successfully start a transaction.  If
we've aborted previously we will skip this step completely, and only
have reloc roots with a reference count of 0, but were never properly
removed from the reloc control's rb tree.

This isn't a problem per-se, our references are held by the list the
reloc roots are on, and by the original root the reloc root belongs to.
If we end up in this situation all the reloc roots will be added to the
dirty_reloc_list, and then properly dropped at that point.  The reloc
control will be free'd and the rb tree is no longer used.

There were two options when fixing this, one was to remove the BUG_ON(),
the other was to make prepare_to_merge() handle the case where we
couldn't start a trans handle.

IMO this is the cleaner solution.  I started with handling the error in
prepare_to_merge(), but it turned out super ugly.  And in the end this
BUG_ON() simply doesn't matter, the cleanup was happening properly, we
were just panicing because this BUG_ON() only matters in the success
case.  So I've opted to just remove it and add a comment where it was.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>