GitHub/LineageOS/G12/android_kernel_amlogic_linux-4.9.git
16 years agonet: replace __inline with inline
Harvey Harrison [Thu, 6 Mar 2008 02:36:28 +0000 (18:36 -0800)]
net: replace __inline with inline

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[SCTP]: Bring MAX_BURST socket option into ietf API extension compliance
Neil Horman [Wed, 5 Mar 2008 21:44:46 +0000 (13:44 -0800)]
[SCTP]: Bring MAX_BURST socket option into ietf API extension compliance

Brings max_burst socket option set/get into line with the latest ietf
socket extensions api draft, while maintaining backwards
compatibility.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoSCTP: Fix chunk parameter processing bug
Gui Jianfeng [Wed, 5 Mar 2008 21:43:32 +0000 (13:43 -0800)]
SCTP: Fix chunk parameter processing bug

If an address family is not listed in "Supported Address Types"
parameter(INIT Chunk), but the packet is sent by that family, this
address family should be considered as supported by peer.  Otherwise,
an error condition will occur. For instance, if kernel receives an
IPV6 SCTP INIT chunk with "Support Address Types" parameter which
indicates just supporting IPV4 Address family. Kernel will reply an
IPV6 SCTP INIT ACK packet, but the source ipv6 address in ipv6 header
will be vacant. This is not correct.

refer to RFC4460 as following:
      IMPLEMENTATION NOTE: If an SCTP endpoint lists in the 'Supported
      Address Types' parameter either IPv4 or IPv6, but uses the other
      family for sending the packet containing the INIT chunk, or if it
      also lists addresses of the other family in the INIT chunk, then
      the address family that is not listed in the 'Supported Address
      Types' parameter SHOULD also be considered as supported by the
      receiver of the INIT chunk.  The receiver of the INIT chunk SHOULD
      NOT respond with any kind of error indication.

Here is a fix to comply to RFC.

Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agomake s2io.c:init_tti() static
Adrian Bunk [Tue, 4 Mar 2008 23:19:22 +0000 (15:19 -0800)]
make s2io.c:init_tti() static

Make the needlessly global init_tti() static.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: "Ramkrishna Vepa" <Ramkrishna.Vepa@neterion.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoFIXED_PHY must depend on PHYLIB=y
Adrian Bunk [Wed, 27 Feb 2008 15:07:54 +0000 (17:07 +0200)]
FIXED_PHY must depend on PHYLIB=y

This patch fixes the following build error introduced by commit
a79d8e93d300adb84cccc38ac396cfb118c238ad and reported by Olaf Hering:

<--  snip  -->

...
  LD      .tmp_vmlinux1
arch/powerpc/sysdev/built-in.o: In function `of_add_fixed_phys':
fsl_soc.c:(.init.text+0xd34): undefined reference to `fixed_phy_add'
make: *** [.tmp_vmlinux1] Error 1

<--   snip  -->

Signed-off-by: Adrian Bunk <adrian.bunk@movial.fi>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agofix drivers/net/atarilance.c compilation
Adrian Bunk [Mon, 3 Mar 2008 21:34:13 +0000 (23:34 +0200)]
fix drivers/net/atarilance.c compilation

This patch fixes the following build error:

<--  snip  -->

...
  CC [M]  drivers/net/atarilance.o
{standard input}: Assembler messages:
{standard input}:406: Error: symbol `Lberr' is already defined
{standard input}:460: Error: symbol `Lberr' is already defined
make[3]: *** [drivers/net/atarilance.o] Error 1

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoIntel ethernet adapter: Update MAINTAINERS
Auke Kok [Mon, 3 Mar 2008 22:37:47 +0000 (14:37 -0800)]
Intel ethernet adapter: Update MAINTAINERS

Another team member unfortunately left: update MAINTAINERS.

Condense the 3 lists down to a single list for all our drivers.

Point to our new sourceforge index page which is slightly
better navigateable than the sf.net project page.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoixgbe: fix typo in speed mesage
Emil Tantilov [Mon, 3 Mar 2008 22:37:42 +0000 (14:37 -0800)]
ixgbe: fix typo in speed mesage

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoe100: Do suspend/shutdown like e1000
Auke Kok [Mon, 3 Mar 2008 22:37:31 +0000 (14:37 -0800)]
e100: Do suspend/shutdown like e1000

This fixes a "trying to free already free IRQ" message and simplifies
the shutdown/suspend code by re-using already existing code when going
to suspend. The code is now symmetric with e100_resume.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoehea: Fix missing Kconfig dependency
Thomas Klein [Mon, 3 Mar 2008 12:52:06 +0000 (13:52 +0100)]
ehea: Fix missing Kconfig dependency

Fixed Kconfig: ehea driver requires sparse mem

Signed-off-by: Thomas Klein <tklein@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoaxnet_cs: change debugging level for "Too much work at interrupt" message.
Komuro [Sat, 1 Mar 2008 01:52:03 +0000 (10:52 +0900)]
axnet_cs: change debugging level for "Too much work at interrupt" message.

This message is frequently displayed even if normal file-transfer.

Signed-off-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agomv643xx_eth: Define module alias for platform device
Martin Michlmayr [Thu, 28 Feb 2008 20:11:48 +0000 (21:11 +0100)]
mv643xx_eth: Define module alias for platform device

The mv643xx_eth driver can be loaded as a platform device, as is done by
various Orion (ARM) based devices.  The driver needs to define a module
alias for the platform driver so udev will load it automatically.
Tested with Debian on a QNAP TS-209.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agode2104x: remove BUG_ON() when changing media type
Ondrej Zary [Mon, 25 Feb 2008 17:45:46 +0000 (18:45 +0100)]
de2104x: remove BUG_ON() when changing media type

When the chip dies (probably because of a bug somewhere in the driver),
de_stop_rxtx() fails and changing the media type crashes the whole machine.
Replace BUG_ON() in de_set_media() with a warning.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agodm9161: add configuration for MII/RMII
frederic Rodo [Wed, 27 Feb 2008 11:58:37 +0000 (12:58 +0100)]
dm9161: add configuration for MII/RMII

Signed-off-by: Frederic Rodo <f.rodo@til-technologies.fr>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years ago[IPCONFIG]: The kernel gets no IP from some DHCP servers
Stephen Hemminger [Wed, 5 Mar 2008 01:03:49 +0000 (17:03 -0800)]
[IPCONFIG]: The kernel gets no IP from some DHCP servers

From: Stephen Hemminger <shemminger@linux-foundation.org>

Based upon a patch by Marcel Wappler:

   This patch fixes a DHCP issue of the kernel: some DHCP servers
   (i.e.  in the Linksys WRT54Gv5) are very strict about the contents
   of the DHCPDISCOVER packet they receive from clients.

   Table 5 in RFC2131 page 36 requests the fields 'ciaddr' and
   'siaddr' MUST be set to '0'.  These DHCP servers ignore Linux
   kernel's DHCP discovery packets with these two fields set to
   '255.255.255.255' (in contrast to popular DHCP clients, such as
   'dhclient' or 'udhcpc').  This leads to a not booting system.

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/linville/wireles...
David S. Miller [Wed, 5 Mar 2008 00:44:01 +0000 (16:44 -0800)]
Merge branch 'master' of /linux/kernel/git/linville/wireless-2.6

16 years agob43legacy: Fix module init message
Michael Buesch [Tue, 4 Mar 2008 19:31:13 +0000 (20:31 +0100)]
b43legacy: Fix module init message

This fixes the module init message to tell that the legacy
driver loaded. This makes it less confusing, in case both drivers are loaded.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agorndis_wlan: fix broken data copy
Jussi Kivilinna [Tue, 4 Mar 2008 18:05:27 +0000 (20:05 +0200)]
rndis_wlan: fix broken data copy

Replace broken code that attempted to copy 6 byte array to 64-bit
integer. Due to missing cast to 64-bit integer, left shift operation
were 32-bit and lead to bytes been copied over each other. New code
uses simple memcpy, for greater readability and efficiency.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agolibertas: compare the current command with response
Sebastian Siewior [Tue, 4 Mar 2008 17:22:27 +0000 (18:22 +0100)]
libertas: compare the current command with response

instead of with itself.

Signed-off-by: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agolibertas: fix sanity check on sequence number in command response
David Woodhouse [Mon, 3 Mar 2008 11:20:12 +0000 (12:20 +0100)]
libertas: fix sanity check on sequence number in command response

Slightly more useful if we compare it against the sequence number of the
command we have outstanding, rather than comparing the reply with itself.

Doh. Pointed out by Sebastian Siewior

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agop54: fix eeprom parser length sanity checks
Johannes Berg [Fri, 29 Feb 2008 22:28:25 +0000 (23:28 +0100)]
p54: fix eeprom parser length sanity checks

When I called p54_parse_eeprom() on a hand-coded structure
I managed to make a small mistake with wrap->len which caused
a segfault a few lines down when trying to read entry->len.
This patch changes the validation code to avoid such problems.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agop54: fix EEPROM structure endianness
Johannes Berg [Fri, 29 Feb 2008 12:56:33 +0000 (13:56 +0100)]
p54: fix EEPROM structure endianness

Since the EEPROM structure is read from hardware, it is
always little endian, annotate that in the struct and
make sure to convert where applicable.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Michael Wu <flamingice@sourmilk.net>
Tested-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agossb: Add pcibios_enable_device() return value check
Yoichi Yuasa [Fri, 29 Feb 2008 10:09:31 +0000 (11:09 +0100)]
ssb: Add pcibios_enable_device() return value check

This patch has added pcibios_enable_device() return value check.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agorc80211-pid: fix rate adjustment
Stefano Brivio [Sun, 2 Mar 2008 10:33:10 +0000 (11:33 +0100)]
rc80211-pid: fix rate adjustment

Merge rate_control_pid_shift_adjust() to rate_control_pid_adjust_rate()
in order to make the learning algorithm aware of constraints on rates. Also
add some comments and rename variables.

This fixes a bug which prevented 802.11b/g non-AP STAs from working with
802.11b only AP STAs.

This patch was originally destined for 2.6.26, and is being backported
to fix a user reported problem in post-2.6.24 kernels.

Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years ago[ESP]: Add select on AUTHENC
Herbert Xu [Tue, 4 Mar 2008 22:29:21 +0000 (14:29 -0800)]
[ESP]: Add select on AUTHENC

Now the ESP uses the AEAD interface even for algorithms which are
not combined mode, we need to select CONFIG_CRYPTO_AUTHENC as
otherwise only combined mode algorithms will work.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[TCP]: Improve ipv4 established hash function.
David S. Miller [Tue, 4 Mar 2008 22:28:41 +0000 (14:28 -0800)]
[TCP]: Improve ipv4 established hash function.

If all of the entropy is in the local and foreign addresses,
but xor'ing together would cancel out that entropy, the
current hash performs poorly.

Suggested by Cosmin Ratiu:

Basically, the situation is as follows: There is a client
machine and a server machine. Both create 15000 virtual
interfaces, open up a socket for each pair of interfaces and
do SIP traffic. By profiling I noticed that there is a lot of
time spent walking the established hash chains with this
particular setup.

The addresses were distributed like this: client interfaces
were 198.18.0.1/16 with increments of 1 and server interfaces
were 198.18.128.1/16 with increments of 1. As I said, there
were 15000 interfaces. Source and destination ports were 5060
for each connection.  So in this case, ports don't matter for
hashing purposes, and the bits from the address pairs used
cancel each other, meaning there are no differences in the
whole lot of pairs, so they all end up in the same hash chain.

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NETPOLL]: Revert two bogus cleanups that broke netconsole.
David S. Miller [Tue, 4 Mar 2008 20:28:49 +0000 (12:28 -0800)]
[NETPOLL]: Revert two bogus cleanups that broke netconsole.

Based upon a report by Andrew Morton and code analysis done
by Jarek Poplawski.

This reverts 33f807ba0d9259e7c75c7a2ce8bd2787e5b540c7 ("[NETPOLL]:
Kill NETPOLL_RX_DROP, set but never tested.")  and
c7b6ea24b43afb5749cb704e143df19d70e23dea ("[NETPOLL]: Don't need
rx_flags.").

The rx_flags did get tested for zero vs. non-zero and therefore we do
need those tests and that code which sets NETPOLL_RX_DROP et al.

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[PPPOL2TP]: Add missing sock_put() in pppol2tp_tunnel_closeall()
Jarek Poplawski [Tue, 4 Mar 2008 04:49:34 +0000 (20:49 -0800)]
[PPPOL2TP]: Add missing sock_put() in pppol2tp_tunnel_closeall()

Every skb removed from session->reorder_q needs sock_put().

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoSubject: [PPPOL2TP] add missing sock_put() in pppol2tp_recv_dequeue()
Jarek Poplawski [Tue, 4 Mar 2008 04:48:53 +0000 (20:48 -0800)]
Subject: [PPPOL2TP] add missing sock_put() in pppol2tp_recv_dequeue()

Every skb removed from session->reorder_q needs sock_put().

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BLUETOOTH]: l2cap info_timer delete fix in hci_conn_del
Dave Young [Mon, 3 Mar 2008 20:18:55 +0000 (12:18 -0800)]
[BLUETOOTH]: l2cap info_timer delete fix in hci_conn_del

When the l2cap info_timer is active the info_state will be set to
L2CAP_INFO_FEAT_MASK_REQ_SENT, and it will be unset after the timer is
deleted or timeout triggered.

Here in l2cap_conn_del only call del_timer_sync when the info_state is
set to L2CAP_INFO_FEAT_MASK_REQ_SENT.

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NET]: Fix race in generic address resolution.
Frank Blaschka [Mon, 3 Mar 2008 20:16:04 +0000 (12:16 -0800)]
[NET]: Fix race in generic address resolution.

neigh_update sends skb from neigh->arp_queue while neigh_timer_handler
has increased skbs refcount and calls solicit with the
skb. neigh_timer_handler should not increase skbs refcount but make a
copy of the skb and do solicit with the copy.

Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoiucv: fix build error on !SMP
Heiko Carstens [Mon, 3 Mar 2008 20:12:33 +0000 (12:12 -0800)]
iucv: fix build error on !SMP

Since a5fbb6d1064be885d2a6b82f625186753cf74848
"KVM: fix !SMP build error" smp_call_function isn't a define anymore
that folds into nothing but a define that calls up_smp_call_function
with all parameters. Hence we cannot #ifdef out the unused code
anymore...
This seems to be the preferred method, so do this for s390 as well.

net/iucv/iucv.c: In function 'iucv_cleanup_queue':
net/iucv/iucv.c:657: error: '__iucv_cleanup_queue' undeclared

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[TCP]: Must count fack_count also when skipping
Ilpo Järvinen [Mon, 3 Mar 2008 20:10:16 +0000 (12:10 -0800)]
[TCP]: Must count fack_count also when skipping

It makes fackets_out to grow too slowly compared with the
real write queue.

This shouldn't cause those BUG_TRAP(packets <= tp->packets_out)
to trigger but how knows how such inconsistent fackets_out
affects here and there around TCP when everything is nowadays
assuming accurate fackets_out. So lets see if this silences
them all.

Reported by Guillaume Chazarain <guichaz@gmail.com>.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[TUN]: Fix RTNL-locking in tun/tap driver
Kim B. Heino [Fri, 29 Feb 2008 20:26:21 +0000 (12:26 -0800)]
[TUN]: Fix RTNL-locking in tun/tap driver

Current tun/tap driver sets also net device's hw address when asked to
change character device's hw address. This is a good idea, but it
misses RTLN-locking, resulting following error message in 2.6.25-rc3's
inetdev_event() function:

RTNL: assertion failed at net/ipv4/devinet.c (1050)

Attached patch fixes this problem.

Signed-off-by: Kim B. Heino <Kim.Heino@bluegiga.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[SCTP]: Use proc_create to setup de->proc_fops.
Pavel Emelyanov [Fri, 29 Feb 2008 19:24:45 +0000 (11:24 -0800)]
[SCTP]: Use proc_create to setup de->proc_fops.

In addition to commit 160f17 ("[SCTP]: Use proc_create() to setup
->proc_fops first") use proc_create in two more places.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IRDA]: Use proc_create() to setup ->proc_fops first
Wang Chen [Fri, 29 Feb 2008 18:34:45 +0000 (10:34 -0800)]
[IRDA]: Use proc_create() to setup ->proc_fops first

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[TCP]: BIC web page link is corrected.
Sangtae Ha [Fri, 29 Feb 2008 06:14:32 +0000 (22:14 -0800)]
[TCP]: BIC web page link is corrected.

Signed-off-by: Sangtae Ha <sha2@ncsu.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[X25]: Use proc_create() to setup ->proc_fops first
Wang Chen [Thu, 28 Feb 2008 22:16:33 +0000 (14:16 -0800)]
[X25]: Use proc_create() to setup ->proc_fops first

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[WANROUTER]: Use proc_create() to setup ->proc_fops first
Wang Chen [Thu, 28 Feb 2008 22:15:56 +0000 (14:15 -0800)]
[WANROUTER]: Use proc_create() to setup ->proc_fops first

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[8021Q]: Use proc_create() to setup ->proc_fops first
Wang Chen [Thu, 28 Feb 2008 22:14:58 +0000 (14:14 -0800)]
[8021Q]: Use proc_create() to setup ->proc_fops first

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4]: Use proc_create() to setup ->proc_fops first
Wang Chen [Thu, 28 Feb 2008 22:14:25 +0000 (14:14 -0800)]
[IPV4]: Use proc_create() to setup ->proc_fops first

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV6]: Use proc_create() to setup ->proc_fops first
Wang Chen [Thu, 28 Feb 2008 22:13:46 +0000 (14:13 -0800)]
[IPV6]: Use proc_create() to setup ->proc_fops first

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[SCTP]: Use proc_create() to setup ->proc_fops first
Wang Chen [Thu, 28 Feb 2008 22:13:16 +0000 (14:13 -0800)]
[SCTP]: Use proc_create() to setup ->proc_fops first

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[PKTGEN]: Use proc_create() to setup ->proc_fops first
Wang Chen [Thu, 28 Feb 2008 22:11:49 +0000 (14:11 -0800)]
[PKTGEN]: Use proc_create() to setup ->proc_fops first

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NEIGHBOUR]: Use proc_create() to setup ->proc_fops first
Wang Chen [Thu, 28 Feb 2008 22:10:51 +0000 (14:10 -0800)]
[NEIGHBOUR]: Use proc_create() to setup ->proc_fops first

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[LLC]: Use proc_create() to setup ->proc_fops first
Wang Chen [Thu, 28 Feb 2008 22:08:54 +0000 (14:08 -0800)]
[LLC]: Use proc_create() to setup ->proc_fops first

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPX]: Use proc_create() to setup ->proc_fops first
Wang Chen [Thu, 28 Feb 2008 22:06:14 +0000 (14:06 -0800)]
[IPX]: Use proc_create() to setup ->proc_fops first

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[SUNRPC]: Use proc_create() to setup ->proc_fops first
Wang Chen [Thu, 28 Feb 2008 22:00:59 +0000 (14:00 -0800)]
[SUNRPC]: Use proc_create() to setup ->proc_fops first

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoMerge branch 'pending' of master.kernel.org:/pub/scm/linux/kernel/git/vxy/lksctp-dev
David S. Miller [Thu, 28 Feb 2008 21:56:37 +0000 (13:56 -0800)]
Merge branch 'pending' of /linux/kernel/git/vxy/lksctp-dev

16 years ago[ATM]: Use proc_create() to setup ->proc_fops first
Wang Chen [Thu, 28 Feb 2008 21:55:45 +0000 (13:55 -0800)]
[ATM]: Use proc_create() to setup ->proc_fops first

Use proc_create() to make sure that ->proc_fops be setup before gluing
PDE to main tree.

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[SCTP]: Update AUTH structures to match declarations in draft-16.
Vlad Yasevich [Wed, 27 Feb 2008 21:04:52 +0000 (16:04 -0500)]
[SCTP]: Update AUTH structures to match declarations in draft-16.

The new SCTP socket api (draft 16) updates the AUTH API structures.
We never exported these since we knew they would change.
Update the rest to match the draft.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
16 years ago[SCTP]: Incorrect length was used in SCTP_*_AUTH_CHUNKS socket option
Vlad Yasevich [Wed, 27 Feb 2008 19:40:37 +0000 (14:40 -0500)]
[SCTP]: Incorrect length was used in SCTP_*_AUTH_CHUNKS socket option

The chunks are stored inside a parameter structure in the kernel
and when we copy them to the user, we need to account for
the parameter header.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
16 years ago[SCTP]: Clean up naming conventions of sctp protocol/address family registration
Neil Horman [Fri, 15 Feb 2008 14:53:59 +0000 (09:53 -0500)]
[SCTP]: Clean up naming conventions of sctp protocol/address family registration

I noticed while looking into some odd behavior in sctp, that the variable
name sctp_pf_inet6_specific was used twice to represent two different
pieces of data (its both a structure name and a pointer to that type of
structure), which is confusing to say the least, and potentially dangerous
depending on the variable scope.  This patch cleans that up, and makes the
protocol and address family registration names in SCTP more regular,
increasing readability.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
 ipv6.c     |   12 ++++++------
 protocol.c |   12 ++++++------
 2 files changed, 12 insertions(+), 12 deletions(-)

16 years ago[APPLETALK]: Use proc_create() to setup ->proc_fops first
Wang Chen [Thu, 28 Feb 2008 20:53:32 +0000 (12:53 -0800)]
[APPLETALK]: Use proc_create() to setup ->proc_fops first

As Davem mentioned in his recently patch
(d9595a7b9c777d45a74774f1428c263a0a47f4c0)
that the procfs visibility should occur after
the ->proc_fops are setup.

And also, Alexey provide proc_create() to make
sure that ->proc_fops is setup before gluing PDE
to main tree.

We use proc_create().

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2X]: add bnx2x to MAINTAINERS
Eliezer Tamir [Thu, 28 Feb 2008 19:59:10 +0000 (11:59 -0800)]
[BNX2X]: add bnx2x to MAINTAINERS

Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2X]: update version, remove CVS strings
Eliezer Tamir [Thu, 28 Feb 2008 19:58:49 +0000 (11:58 -0800)]
[BNX2X]: update version, remove CVS strings

Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2X]: Fix Xmit bugs
Eliezer Tamir [Thu, 28 Feb 2008 19:57:55 +0000 (11:57 -0800)]
[BNX2X]: Fix Xmit bugs

Several endianity corrections in start_xmit()

Fixed TSO bug where packets were missing the TCP flags.

Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2X]: Prevent PCI queue overflow
Eliezer Tamir [Thu, 28 Feb 2008 19:57:29 +0000 (11:57 -0800)]
[BNX2X]: Prevent PCI queue overflow

Limit traffic through an internal queue to prevent overflow.

Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2X]: fix slowpath races and locking
Eliezer Tamir [Thu, 28 Feb 2008 19:56:57 +0000 (11:56 -0800)]
[BNX2X]: fix slowpath races and locking

Fixed locking between fastpath and slowpath operations.

Corrected order of traffic disabling to prevent race when going down
under traffic.

- first have the microcode drop all incoming packets
- then do the slowpath stuff
- only then reset the MAC

Got rid of in_reset_task.

Remove_one() and friends would deference a null pointer if init_one
failed.

Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2X]: fix HW attentions and error handling
Eliezer Tamir [Thu, 28 Feb 2008 19:55:53 +0000 (11:55 -0800)]
[BNX2X]: fix HW attentions and error handling

Some of the HW attentions, used to indicate an error were not properly
acked.

This will cause the driver to endlessly receive interrupts when such
an error happens.

Had to break the code into smaller chunks because it got too nested.

Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2X]: fix MSI-X/INT#A errata
Eliezer Tamir [Thu, 28 Feb 2008 19:54:54 +0000 (11:54 -0800)]
[BNX2X]: fix MSI-X/INT#A errata

Errata A0.158 workaround.

Running in INT#A mode after running with MSI-X fails due to a PCI core
bug.

Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2X]: correct statistics
Eliezer Tamir [Thu, 28 Feb 2008 19:54:03 +0000 (11:54 -0800)]
[BNX2X]: correct statistics

Errors were summed improperly, some stats were missing.

Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2X]: Correct RX filtering and MC configuration
Eliezer Tamir [Thu, 28 Feb 2008 19:53:13 +0000 (11:53 -0800)]
[BNX2X]: Correct RX filtering and MC configuration

The configuration of RX filtering needed the following corrections:

Drop flags need to be set per Rx queue.

Have to tell the microcode to collect drop stats, and properly wait
for them to complete when going down.

Sometimes we failed to detect proper completion due to a logical error
in the wait loop.

Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2X]: Correct Link management
Eliezer Tamir [Thu, 28 Feb 2008 19:51:50 +0000 (11:51 -0800)]
[BNX2X]: Correct Link management

Properly protect PHY access between two devices on the same board with
a HW lock.

Use GPIO to clear all previous configurations before changing link
parameters.

Shut down the external PHY in case of fan failure.

Reducing the MDC/MDIO clock to 2.5MHz due to problems with some
devices.

Resolve the flow control response according to autoneg with external
PHY.

Unmasking all PHY interrupts in single write to prevent a race in the
interrupts order.

LASI indication fixes to work with peculiarities of PHYs.

Disable MAC RX to avoid a HW bug when closing the MAC under traffic.

Disable parallel detection on HiGig due to HW limitation.

Updating the shared memory structure to work with the current
bootcode.

Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2X]: Correct init_one()
Eliezer Tamir [Thu, 28 Feb 2008 19:50:16 +0000 (11:50 -0800)]
[BNX2X]: Correct init_one()

Correct PCI-E info printed by init_one()
In one case it failed to free the netdev.

Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[BNX2X]: Spelling fixes
Eliezer Tamir [Thu, 28 Feb 2008 19:49:42 +0000 (11:49 -0800)]
[BNX2X]: Spelling fixes

Signed-off-by: Eliezer Tamir <eliezert@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPCOMP]: Disable BH on output when using shared tfm
Herbert Xu [Thu, 28 Feb 2008 19:23:17 +0000 (11:23 -0800)]
[IPCOMP]: Disable BH on output when using shared tfm

Because we use shared tfm objects in order to conserve memory,
(each tfm requires 128K of vmalloc memory), BH needs to be turned
off on output as that can occur in process context.

Previously this was done implicitly by the xfrm output code.
That was lost when it became lockless.  So we need to add the
BH disabling to IPComp directly.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/linville/wireles...
David S. Miller [Thu, 28 Feb 2008 19:03:29 +0000 (11:03 -0800)]
Merge branch 'master' of /linux/kernel/git/linville/wireless-2.6

16 years agoSSB PCI core driver: use new SPROM data structure
Aurelien Jarno [Thu, 28 Feb 2008 14:11:26 +0000 (15:11 +0100)]
SSB PCI core driver: use new SPROM data structure

Switch the SSB PCI core driver to the new SPROM data structure now that
the old one has been removed.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoDon't build bcm43xx if SSB is static and b43 PCI-SSB bridge is enabled.
Alexey Zaytsev [Sat, 23 Feb 2008 10:33:07 +0000 (13:33 +0300)]
Don't build bcm43xx if SSB is static and b43 PCI-SSB bridge is enabled.

This may happen e.g. when the ssb is statically enables by the b44 driver,
and the b43 pci-ssb bridge is enbled by the b43/b43legacy drivers, or the
b43/b43legacy drivers are built statically.

Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoUse a separate config option for the b43 pci to ssb bridge.
Alexey Zaytsev [Sat, 23 Feb 2008 09:59:26 +0000 (12:59 +0300)]
Use a separate config option for the b43 pci to ssb bridge.

The bridge code was unnecessary enabled by the b44
driver, but it prevents the bcm43xx driver from
being loaded, as the bridge claims the same pci ids.

Now we enable the birdge only if the b43{legacy}
drivers are selected.

Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agolibertas: Remove unused exports
Roland Dreier [Tue, 26 Feb 2008 14:26:56 +0000 (15:26 +0100)]
libertas: Remove unused exports

The libertas driver exports a number of symbols with no in-tree users;
remove these unused exports.  lbs_reset_device() is completely unused, with
no callers at all, so remove the function completely.

A couple of these unused exported symbols are static, which causes the
following build error on ia64 with gcc 4.2.3:

    drivers/net/wireless/libertas/main.c:1375: error: __ksymtab_lbs_remove_mesh causes a section type conflict
    drivers/net/wireless/libertas/main.c:1354: error: __ksymtab_lbs_add_mesh causes a section type conflict

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agomac80211: fix kmalloc vs. net_ratelimit
Johannes Berg [Mon, 25 Feb 2008 23:39:28 +0000 (00:39 +0100)]
mac80211: fix kmalloc vs. net_ratelimit

The "goto end;" part definitely must not be rate limited.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agort2x00: Fix rt2x00lib_reset_link_tuner()
Ivo van Doorn [Mon, 25 Feb 2008 22:15:13 +0000 (23:15 +0100)]
rt2x00: Fix rt2x00lib_reset_link_tuner()

rt2x00lib_reset_link_tuner() can be called from within
the link tuner itself. This means that it should
_not_ call rt2x00lib_stop_link_tuner() since that will
cause the thread to hang.

Reorder the things that should be done during a
link tuner reset and during a link tuner start.

Also make antenna tuning the last step of the link
tuner since it could possibly reset some statistical
information which we need for average calculation.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agort2x00: Don't switch to antenna with low rssi
Ivo van Doorn [Mon, 25 Feb 2008 22:15:08 +0000 (23:15 +0100)]
rt2x00: Don't switch to antenna with low rssi

When rssi_a > rssi_b is true and the current antenna
was already antenna A, then rt2x00 incorrectly jumped
to antenna B.

Also don't configure the antenna when there has been
no change in the antenna setup.

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agort2x00: Add link tuner safe RX toggle states
Ivo van Doorn [Mon, 25 Feb 2008 22:15:05 +0000 (23:15 +0100)]
rt2x00: Add link tuner safe RX toggle states

This adds 2 new states which both are used to toggle
the RX. These new states are required for usage
inside the link tuner thread, because the normal
RX toggling will stop the link tuner thread.
While it is possible that the link tuner thread itself
is the caller of the RX toggle (when using software
antenna diversity).

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agort2x00: Fix antenna diversity
Ivo van Doorn [Mon, 25 Feb 2008 22:15:01 +0000 (23:15 +0100)]
rt2x00: Fix antenna diversity

Fix 2 issues in antenna diversity selection.

1) the following statement will always return true.
if ((rssi_curr - rssi_old) > -5 || (rssi_curr - rssi_old) < 5)
It is cleaner to check if the absolute value is smaller then 5.

2) Only enable software diversity when default antenna setup
indicates support for it. Don't select it when the hardware
does not indicate support for it...

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agogelic wireless driver needs WIRELESS_EXT support
Sebastian Siewior [Sat, 23 Feb 2008 20:46:31 +0000 (21:46 +0100)]
gelic wireless driver needs WIRELESS_EXT support

|   CC      drivers/net/ps3_gelic_wireless.o
| /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c: In function 'gelic_wl_setup_netdev_ops':
| /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c:2660: error: 'struct net_device' has no member named 'wireless_data'
| /home/bigeasy/git/linux-2.6/drivers/net/ps3_gelic_wireless.c:2661: error: 'struct net_device' has no member named 'wireless_handlers'
| make[3]: *** [drivers/net/ps3_gelic_wireless.o] Error 1
| make[2]: *** [drivers/net] Error 2
| make[1]: *** [drivers] Error 2
| make[1]: *** Waiting for unfinished jobs....
| make: *** [sub-make] Error 2

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Acked-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agoPS3: gelic: Link the wireless net_device structure to the corresponding device structure
Masakazu Mokuno [Fri, 22 Feb 2008 07:45:26 +0000 (16:45 +0900)]
PS3: gelic: Link the wireless net_device structure to the corresponding device structure

Link the net_device structure of the wireless part to the
corresponding device structure.

Without this, the sysfs node for this net_device would not have
'device' link.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years agorndis_wlan: fix sparse warnings
Johannes Berg [Wed, 20 Feb 2008 10:47:45 +0000 (11:47 +0100)]
rndis_wlan: fix sparse warnings

It is obviously wrong to use an enum in a little endian struct,
and those other enums should be declared differently.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
16 years ago[SCTP]: Correctly set the length of sctp_assoc_change notification
Vlad Yasevich [Thu, 14 Feb 2008 15:18:20 +0000 (10:18 -0500)]
[SCTP]: Correctly set the length of sctp_assoc_change notification

sctp_assoc_change notification may contain the data from a received
ABORT chunk.  Set the length correctly to account for that.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
16 years ago[NETFILTER]: Fix NF_QUEUE_NR() parenthesis
Patrick McHardy [Wed, 27 Feb 2008 20:21:18 +0000 (12:21 -0800)]
[NETFILTER]: Fix NF_QUEUE_NR() parenthesis

Properly add parens around the macro argument. This is not needed by
the kernel but the macro is exported to userspace, so it shouldn't
make any assumptions.

Also use NF_VERDICT_BITS instead of NF_VERDICT_QBTIS for the left-shift
since thats whats logically correct.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NETFILTER]: xt_conntrack: fix IPv4 address comparison
Jan Engelhardt [Wed, 27 Feb 2008 20:20:41 +0000 (12:20 -0800)]
[NETFILTER]: xt_conntrack: fix IPv4 address comparison

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NETFILTER]: xt_conntrack: fix missing boolean clamping
Jan Engelhardt [Wed, 27 Feb 2008 20:09:05 +0000 (12:09 -0800)]
[NETFILTER]: xt_conntrack: fix missing boolean clamping

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[NETFILTER]: nf_conntrack: fix smp_processor_id() in preemptible code warning
Patrick McHardy [Wed, 27 Feb 2008 20:07:47 +0000 (12:07 -0800)]
[NETFILTER]: nf_conntrack: fix smp_processor_id() in preemptible code warning

Since we're using RCU for the conntrack hash now, we need to avoid
getting preempted or interrupted by BHs while changing the stats.

Fixes warning reported by Tilman Schmidt <tilman@imap.cc> when using
preemptible RCU:

[   48.180297] BUG: using smp_processor_id() in preemptible [00000000] code: ntpdate/3562
[   48.180297] caller is __nf_conntrack_find+0x9b/0xeb [nf_conntrack]
[   48.180297] Pid: 3562, comm: ntpdate Not tainted 2.6.25-rc2-mm1-testing #1
[   48.180297]  [<c02015b9>] debug_smp_processor_id+0x99/0xb0
[   48.180297]  [<fac643a7>] __nf_conntrack_find+0x9b/0xeb [nf_conntrack]

Tested-by: Tilman Schmidt <tilman@imap.cc>
Tested-by: Christian Casteyde <casteyde.christian@free.fr> [Bugzilla #10097]
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV6] SYSCTL: Fix possible memory leakage in error path.
YOSHIFUJI Hideaki [Wed, 27 Feb 2008 20:06:38 +0000 (12:06 -0800)]
[IPV6] SYSCTL: Fix possible memory leakage in error path.

In error path, we do need to free memory just allocated.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[INET]: Don't create tunnels with '%' in name.
Pavel Emelyanov [Wed, 27 Feb 2008 07:51:04 +0000 (23:51 -0800)]
[INET]: Don't create tunnels with '%' in name.

Four tunnel drivers (ip_gre, ipip, ip6_tunnel and sit) can receive a
pre-defined name for a device from the userspace.  Since these drivers
call the register_netdevice() (rtnl_lock, is held), which does _not_
generate the device's name, this name may contain a '%' character.

Not sure how bad is this to have a device with a '%' in its name, but
all the other places either use the register_netdev(), which call the
dev_alloc_name(), or explicitly call the dev_alloc_name() before
registering, i.e. do not allow for such names.

This had to be prior to the commit 34cc7b, but I forgot to number the
patches and this one got lost, sorry.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[AF_KEY]: Fix oops by converting to proc_net_*().
David S. Miller [Wed, 27 Feb 2008 06:20:44 +0000 (22:20 -0800)]
[AF_KEY]: Fix oops by converting to proc_net_*().

To make sure the procfs visibility occurs after the ->proc_fs ops are
setup, use proc_net_fops_create() and proc_net_remove().

This also fixes an OOPS after module unload in that the name string
for remove was wrong, so it wouldn't actually be removed.  That bug
was introduced by commit 61145aa1a12401ac71bcc450a58c773dd6e2bfb9
("[KEY]: Clean up proc files creation a bit.")

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoCONNECTOR: make cn_already_initialized static
Li Zefan [Wed, 27 Feb 2008 02:25:53 +0000 (18:25 -0800)]
CONNECTOR: make cn_already_initialized static

It is used in connector.c only, so make it static.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV4]: Reset scope when changing address
Bjorn Mork [Wed, 27 Feb 2008 02:17:53 +0000 (18:17 -0800)]
[IPV4]: Reset scope when changing address

This bug did bite at least one user, who did have to resort to rebooting
the system after an "ifconfig eth0 127.0.0.1" typo.

Deleting the address and adding a new is a less intrusive workaround.
But I still beleive this is a bug that should be fixed.  Some way or
another.

Another possibility would be to remove the scope mangling based on
address.  This will always be incomplete (are 127/8 the only address
space with host scope requirements?)

We set the scope to RT_SCOPE_HOST if an IPv4 interface is configured
with a loopback address (127/8).  The scope is never reset, and will
remain set to RT_SCOPE_HOST after changing the address. This patch
resets the scope if the address is changed again, to restore normal
functionality.

Signed-off-by: Bjorn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV6]: Add missing initializations of the new nl_info.nl_net field
Benjamin Thery [Wed, 27 Feb 2008 02:10:03 +0000 (18:10 -0800)]
[IPV6]: Add missing initializations of the new nl_info.nl_net field

Add some more missing initializations of the new nl_info.nl_net field
in IPv6 stack. This field will be used when network namespaces are
fully supported.

Signed-off-by: Benjamin Thery <benjamin.thery@bull.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[MACVLAN]: Update Kconfig to refer to iproute
Patrick McHardy [Wed, 27 Feb 2008 01:52:05 +0000 (17:52 -0800)]
[MACVLAN]: Update Kconfig to refer to iproute

Since the macvlan release I had at least 5 users asking how to configure
it since the old userspace tool doesn't work with the version in the
kernel. Add a pointer to the Kconfig help.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agobluetooth: delete timer in l2cap_conn_del()
Thomas Gleixner [Wed, 27 Feb 2008 01:42:56 +0000 (17:42 -0800)]
bluetooth: delete timer in l2cap_conn_del()

Delete a possibly armed timer before kfree'ing the connection object.

Solves: http://lkml.org/lkml/2008/2/15/514

Reported-by:Quel Qun <kelk1@comcast.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agotipc: fix integer as NULL pointer sparse warnings in tipc
Harvey Harrison [Mon, 25 Feb 2008 02:38:31 +0000 (18:38 -0800)]
tipc: fix integer as NULL pointer sparse warnings in tipc

net/tipc/cluster.c:145:2: warning: Using plain integer as NULL pointer
net/tipc/link.c:3254:36: warning: Using plain integer as NULL pointer
net/tipc/ref.c:151:15: warning: Using plain integer as NULL pointer
net/tipc/zone.c:85:2: warning: Using plain integer as NULL pointer

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoMerge branch 'upstream-davem' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
David S. Miller [Mon, 25 Feb 2008 01:57:16 +0000 (17:57 -0800)]
Merge branch 'upstream-davem' of /linux/kernel/git/jgarzik/netdev-2.6

16 years agoLinux 2.6.25-rc3
Linus Torvalds [Sun, 24 Feb 2008 21:25:54 +0000 (13:25 -0800)]
Linux 2.6.25-rc3

16 years agoi2c-i801: Add support for the ICH10
Gaston, Jason D [Sun, 24 Feb 2008 19:03:42 +0000 (20:03 +0100)]
i2c-i801: Add support for the ICH10

Add the Intel ICH10 SMBus Controller DeviceID's and updates
Tolapai support.

Signed-off-by: Jason Gaston <jason.d.gaston@intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
16 years agoi2c: Make i2c_register_board_info() a NOP when CONFIG_I2C_BOARDINFO=n
David Brownell [Sun, 24 Feb 2008 19:03:42 +0000 (20:03 +0100)]
i2c: Make i2c_register_board_info() a NOP when CONFIG_I2C_BOARDINFO=n

Don't require platform code to be #ifdeffed according to whether
I2C is enabled or not ... if it's not enabled, let GCC compile out
all I2C device declarations.  (Issue noted on an NSLU2 build that
didn't configure I2C.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
16 years agoi2c-pca-isa: Add access check to legacy ioports
Christian Krafft [Sun, 24 Feb 2008 19:03:42 +0000 (20:03 +0100)]
i2c-pca-isa: Add access check to legacy ioports

When probing i2c-pca-isa writes to legacy ioports, which crashes the kernel
if there is no device at that port.
This patch adds a check_legacy_ioport call, so probe fails gracefully
and thus prevents the oops.

Signed-off-by: Christian Krafft <krafft@de.ibm.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
16 years agoAlchemy: compile fix
Manuel Lauss [Sun, 24 Feb 2008 19:03:42 +0000 (20:03 +0100)]
Alchemy: compile fix

Commit 8b798c4d16b762d15f4055597ff8d87f73b35552 broke
alchemy build, fix it.  Pointed out by Adrian Bunk.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>