GitHub/LineageOS/G12/android_kernel_amlogic_linux-4.9.git
11 years agosfc: remove duplicated include from efx.c
Wei Yongjun [Wed, 13 Mar 2013 03:02:20 +0000 (03:02 +0000)]
sfc: remove duplicated include from efx.c

Remove duplicated include.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: Bump up the version to 5.1.37
Shahed Shaikh [Tue, 12 Mar 2013 09:02:17 +0000 (09:02 +0000)]
qlcnic: Bump up the version to 5.1.37

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: Implement flash sysfs callback for 83xx adapter
Himanshu Madhani [Tue, 12 Mar 2013 09:02:16 +0000 (09:02 +0000)]
qlcnic: Implement flash sysfs callback for 83xx adapter

QLogic applications use these callbacks to perform

o  NIC Partitioning (NPAR) configuration and management
o  Diagnostic tests
o  Flash access and updates

Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'cpsw'
David S. Miller [Wed, 13 Mar 2013 08:38:27 +0000 (04:38 -0400)]
Merge branch 'cpsw'

Mugunthan V N says:

====================
This patch serires implements the following features in CPSW driver
* get/set phy link settings
* interrupt pacing
* get phy id via ioctl cmd SIOCGMIIPHY

Changes from initial version
* Made active-slave common for cpts, ethtool and SIOCGMIIPHY ioctl
* Cleaned CPSW DT binding documentation by seperating slave nodes
  under sub-section
* implemented get phy id via ioctl cmd SIOCGMIIPHY
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agodrivers: net: ethernet: cpsw: implement get phy_id via ioctl
Mugunthan V N [Mon, 11 Mar 2013 23:16:38 +0000 (23:16 +0000)]
drivers: net: ethernet: cpsw: implement get phy_id via ioctl

Implement get phy_id via ioctl SIOCGMIIPHY. In switch mode active phy_id
is returned and in dual EMAC mode slave's specific phy_id is returned.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agodriver: net: ethernet: cpsw: implement interrupt pacing via ethtool
Mugunthan V N [Mon, 11 Mar 2013 23:16:37 +0000 (23:16 +0000)]
driver: net: ethernet: cpsw: implement interrupt pacing via ethtool

This patch implements support for interrupt pacing block of CPSW via ethtool
Inetrrupt pacing block is common of both the ethernet interface in
dual emac mode

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agodriver: net: ethernet: cpsw: implement ethtool get/set phy setting
Mugunthan V N [Mon, 11 Mar 2013 23:16:36 +0000 (23:16 +0000)]
driver: net: ethernet: cpsw: implement ethtool get/set phy setting

This patch implements get/set of the phy settings via ethtool apis

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agodrivers: net: ethernet: cpsw: change cpts_active_slave to active_slave
Mugunthan V N [Mon, 11 Mar 2013 23:16:35 +0000 (23:16 +0000)]
drivers: net: ethernet: cpsw: change cpts_active_slave to active_slave

Change cpts_active_slave to active_slave so that the same DT property
can be used to ethtool and SIOCGMIIPHY.

CC: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agodocumentation: dt: bindings: cpsw: cleanup documentation
Mugunthan V N [Mon, 11 Mar 2013 23:16:34 +0000 (23:16 +0000)]
documentation: dt: bindings: cpsw: cleanup documentation

Move all the slave note properties to separate section to reduce the
confusion between slave note properties and cpsw node properties

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoks8851_mll: basic ethernet statistics
David J. Choi [Mon, 11 Mar 2013 16:22:54 +0000 (09:22 -0700)]
ks8851_mll: basic ethernet statistics

Implement to collect ethernet statistical information on ks8851_mll device.

Signed-off-by: David J. Choi <david.choi@micrel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agodriver: isdn: hisax: remove cast for kmalloc/kzalloc return value
Zhang Yanfei [Mon, 11 Mar 2013 19:15:49 +0000 (19:15 +0000)]
driver: isdn: hisax: remove cast for kmalloc/kzalloc return value

remove cast for kmalloc/kzalloc return value.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agodriver: isdn: capi: remove cast for kmalloc return value
Zhang Yanfei [Mon, 11 Mar 2013 19:13:47 +0000 (19:13 +0000)]
driver: isdn: capi: remove cast for kmalloc return value

remove cast for kmalloc return value.

Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agomv643xx_eth with 88E1318S: support Wake on LAN
Michael Stapelberg [Mon, 11 Mar 2013 13:56:45 +0000 (13:56 +0000)]
mv643xx_eth with 88E1318S: support Wake on LAN

This has been tested on a qnap TS-119P II. Note that enabling WOL with
"ethtool -s eth0 wol g" is not enough; you also need to tell the PIC
microcontroller inside the qnap that WOL should be enabled by sending
0xF2 with qcontrol(1) and you have to disable EUP ("Energy-using
Products", a European power-saving thing) by sending 0xF4.

Signed-off-by: Michael Stapelberg <michael@stapelberg.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agophy: add set_wol/get_wol functions
Michael Stapelberg [Mon, 11 Mar 2013 13:56:44 +0000 (13:56 +0000)]
phy: add set_wol/get_wol functions

This allows ethernet drivers (such as the mv643xx_eth) to support
Wake on LAN on platforms where PHY registers have to be configured
for Wake on LAN (e.g. the Marvell Kirkwood based qnap TS-119P II).

Signed-off-by: Michael Stapelberg <michael@stapelberg.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agotcp: TLP loss detection.
Nandita Dukkipati [Mon, 11 Mar 2013 10:00:44 +0000 (10:00 +0000)]
tcp: TLP loss detection.

This is the second of the TLP patch series; it augments the basic TLP
algorithm with a loss detection scheme.

This patch implements a mechanism for loss detection when a Tail
loss probe retransmission plugs a hole thereby masking packet loss
from the sender. The loss detection algorithm relies on counting
TLP dupacks as outlined in Sec. 3 of:
http://tools.ietf.org/html/draft-dukkipati-tcpm-tcp-loss-probe-01

The basic idea is: Sender keeps track of TLP "episode" upon
retransmission of a TLP packet. An episode ends when the sender receives
an ACK above the SND.NXT (tracked by tlp_high_seq) at the time of the
episode. We want to make sure that before the episode ends the sender
receives a "TLP dupack", indicating that the TLP retransmission was
unnecessary, so there was no loss/hole that needed plugging. If the
sender gets no TLP dupack before the end of the episode, then it reduces
ssthresh and the congestion window, because the TLP packet arriving at
the receiver probably plugged a hole.

Signed-off-by: Nandita Dukkipati <nanditad@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agotcp: Tail loss probe (TLP)
Nandita Dukkipati [Mon, 11 Mar 2013 10:00:43 +0000 (10:00 +0000)]
tcp: Tail loss probe (TLP)

This patch series implement the Tail loss probe (TLP) algorithm described
in http://tools.ietf.org/html/draft-dukkipati-tcpm-tcp-loss-probe-01. The
first patch implements the basic algorithm.

TLP's goal is to reduce tail latency of short transactions. It achieves
this by converting retransmission timeouts (RTOs) occuring due
to tail losses (losses at end of transactions) into fast recovery.
TLP transmits one packet in two round-trips when a connection is in
Open state and isn't receiving any ACKs. The transmitted packet, aka
loss probe, can be either new or a retransmission. When there is tail
loss, the ACK from a loss probe triggers FACK/early-retransmit based
fast recovery, thus avoiding a costly RTO. In the absence of loss,
there is no change in the connection state.

PTO stands for probe timeout. It is a timer event indicating
that an ACK is overdue and triggers a loss probe packet. The PTO value
is set to max(2*SRTT, 10ms) and is adjusted to account for delayed
ACK timer when there is only one oustanding packet.

TLP Algorithm

On transmission of new data in Open state:
  -> packets_out > 1: schedule PTO in max(2*SRTT, 10ms).
  -> packets_out == 1: schedule PTO in max(2*RTT, 1.5*RTT + 200ms)
  -> PTO = min(PTO, RTO)

Conditions for scheduling PTO:
  -> Connection is in Open state.
  -> Connection is either cwnd limited or no new data to send.
  -> Number of probes per tail loss episode is limited to one.
  -> Connection is SACK enabled.

When PTO fires:
  new_segment_exists:
    -> transmit new segment.
    -> packets_out++. cwnd remains same.

  no_new_packet:
    -> retransmit the last segment.
       Its ACK triggers FACK or early retransmit based recovery.

ACK path:
  -> rearm RTO at start of ACK processing.
  -> reschedule PTO if need be.

In addition, the patch includes a small variation to the Early Retransmit
(ER) algorithm, such that ER and TLP together can in principle recover any
N-degree of tail loss through fast recovery. TLP is controlled by the same
sysctl as ER, tcp_early_retrans sysctl.
tcp_early_retrans==0; disables TLP and ER.
 ==1; enables RFC5827 ER.
 ==2; delayed ER.
 ==3; TLP and delayed ER. [DEFAULT]
 ==4; TLP only.

The TLP patch series have been extensively tested on Google Web servers.
It is most effective for short Web trasactions, where it reduced RTOs by 15%
and improved HTTP response time (average by 6%, 99th percentile by 10%).
The transmitted probes account for <0.5% of the overall transmissions.

Signed-off-by: Nandita Dukkipati <nanditad@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agofec: Use devm_request_and_ioremap()
Fabio Estevam [Mon, 11 Mar 2013 07:32:55 +0000 (07:32 +0000)]
fec: Use devm_request_and_ioremap()

Using devm_request_and_ioremap() can make the code cleaner and simpler.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agofec: Remove unused pci header
Fabio Estevam [Mon, 11 Mar 2013 07:32:54 +0000 (07:32 +0000)]
fec: Remove unused pci header

PCI header is not needed, so get rid of it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobridge: using for_each_set_bit to simplify the code
Wei Yongjun [Mon, 11 Mar 2013 05:45:23 +0000 (05:45 +0000)]
bridge: using for_each_set_bit to simplify the code

Using for_each_set_bit() to simplify the code.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobridge: using for_each_set_bit_from to simplify the code
Wei Yongjun [Mon, 11 Mar 2013 05:43:48 +0000 (05:43 +0000)]
bridge: using for_each_set_bit_from to simplify the code

Using for_each_set_bit_from() to simplify the code.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: use list_move instead of list_del/list_add
Wei Yongjun [Mon, 11 Mar 2013 04:40:14 +0000 (04:40 +0000)]
bnx2x: use list_move instead of list_del/list_add

Using list_move() instead of list_del() + list_add().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: remove duplicated include from qlcnic_sysfs.c
Wei Yongjun [Mon, 11 Mar 2013 04:29:50 +0000 (04:29 +0000)]
qlcnic: remove duplicated include from qlcnic_sysfs.c

Remove duplicated include.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: Restore FCoE 4-port devices support
Dmitry Kravkov [Mon, 11 Mar 2013 05:17:53 +0000 (05:17 +0000)]
bnx2x: Restore FCoE 4-port devices support

bnx2x FW 1.78.17 properly supports DCBX configuration for 4-port devices,
enabling FCoE support on 57840 boards.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: use FW 7.8.17
Dmitry Kravkov [Mon, 11 Mar 2013 05:17:52 +0000 (05:17 +0000)]
bnx2x: use FW 7.8.17

Update appropriate HSI files and adapt driver accordingly.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: Avoid using zero MAC
Yuval Mintz [Mon, 11 Mar 2013 05:17:51 +0000 (05:17 +0000)]
bnx2x: Avoid using zero MAC

Prevent bnx2x devices which are used mainly for storage from using zero
MAC addresses as their primary MAC address.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: Control SFP+ tap values via nvm config
Yaniv Rosner [Mon, 11 Mar 2013 05:17:50 +0000 (05:17 +0000)]
bnx2x: Control SFP+ tap values via nvm config

Configure SFP+ tap values to optimize link signal according to NVRAM setup.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: Add EEE support for BCM84834
Yaniv Rosner [Mon, 11 Mar 2013 05:17:49 +0000 (05:17 +0000)]
bnx2x: Add EEE support for BCM84834

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: Add RJ45 SFP module detection
Yaniv Rosner [Mon, 11 Mar 2013 05:17:48 +0000 (05:17 +0000)]
bnx2x: Add RJ45 SFP module detection

Add RJ45 SFP module detection. In case the user set 10G link speed, and the
module doesn't support it, then force the speed to 1G and notify the user.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: Get gso_segs from FW
Yuval Mintz [Mon, 11 Mar 2013 05:17:47 +0000 (05:17 +0000)]
bnx2x: Get gso_segs from FW

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: Control number of vfs dynamically
Ariel Elior [Mon, 11 Mar 2013 05:17:46 +0000 (05:17 +0000)]
bnx2x: Control number of vfs dynamically

1. Support sysfs interface for getting the maximal number of virtual functions
   of a given physical function.
2. Support sysfs interface for getting and setting the current number of
   virtual functions.

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: Add iproute2 support for vfs
Ariel Elior [Mon, 11 Mar 2013 05:17:45 +0000 (05:17 +0000)]
bnx2x: Add iproute2 support for vfs

This patch adds support for iproute2 callbacks allowing querying a physical
function as to its child virtual functions, and setting the macs and vlans
of said virtual functions.

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: Prevent "Unknown MF" print in SF mode
Ariel Elior [Mon, 11 Mar 2013 05:17:44 +0000 (05:17 +0000)]
bnx2x: Prevent "Unknown MF" print in SF mode

When using a chip operating in Single Function mode, when the chip is probed
the bnx2x would print a message warning of an unknown Multi Function mode.

This patch prevents said message.

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: Take chip version from MFW
Yuval Mintz [Mon, 11 Mar 2013 05:17:43 +0000 (05:17 +0000)]
bnx2x: Take chip version from MFW

In latest boards, the CHIP_METAL register contains an incorrect
revision value, so the correct one needs to be obtained in a
different manner.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: Set ethtool ops for vfs
Ariel Elior [Mon, 11 Mar 2013 05:17:42 +0000 (05:17 +0000)]
bnx2x: Set ethtool ops for vfs

Virtual functions don't have access to HW registers, therefore most ethtool ops
are forbidden to them. Instead of checking in each op whether the device being
driven is a virtual function or a physical function, this patch creates a
separate ethtool ops struct for virtual functions and uses it to initialize
the ethtool ops of the driver in case it is driving a virtual function device.

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: fix vlan-mac memory leak
Yuval Mintz [Mon, 11 Mar 2013 05:17:41 +0000 (05:17 +0000)]
bnx2x: fix vlan-mac memory leak

Release (previously leaking) memory when elements are removed from pending
execution lists in the bnx2x driver.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoethernet: amd: use PTR_RET instead of IS_ERR + PTR_ERR
Silviu-Mihai Popescu [Mon, 11 Mar 2013 21:48:07 +0000 (21:48 +0000)]
ethernet: amd: use PTR_RET instead of IS_ERR + PTR_ERR

This uses PTR_RET instead of IS_ERR and PTR_ERR in order to increase
readability.

Signed-off-by: Silviu-Mihai Popescu <silviupopescu1990@gmail.com>
Acked-by: <Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agophy/micrel: move flag handling to function for common use
Hector Palacios [Sun, 10 Mar 2013 22:50:03 +0000 (22:50 +0000)]
phy/micrel: move flag handling to function for common use

The flag MICREL_PHY_50MHZ_CLK is not of exclusive use of KSZ8051
model. At least KSZ8021 and KSZ8031 models also use it.
This patch moves the handling of this and future flags to a
separate function so that the different PHY models can call it on
their init function, if needed.

Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agophy/micrel: Add support for KSZ8031
Hector Palacios [Sun, 10 Mar 2013 22:50:02 +0000 (22:50 +0000)]
phy/micrel: Add support for KSZ8031

Micrel PHY KSZ8031 is similar to KSZ8021 and also requires the special
initialization of "Operation Mode Strap Override" in reg 0x16
introduced in 212ea99 (phy/micrel: Implement support for KSZ8021).

Signed-off-by: Hector Palacios <hector.palacios@digi.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
David S. Miller [Tue, 12 Mar 2013 09:52:22 +0000 (05:52 -0400)]
Merge git://git./linux/kernel/git/davem/net

Conflicts:
drivers/net/ethernet/intel/e1000e/netdev.c

Minor conflict in e1000e, a line that got fixed in 'net'
has been removed in 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobridge: reserve space for IFLA_BRPORT_FAST_LEAVE
stephen hemminger [Mon, 11 Mar 2013 13:52:17 +0000 (13:52 +0000)]
bridge: reserve space for IFLA_BRPORT_FAST_LEAVE

The bridge multicast fast leave feature was added sufficient space
was not reserved in the netlink message. This means the flag may be
lost in netlink events and results of queries.

Found by observation while looking up some netlink stuff for discussion with Vlad.
Problem introduced by commit c2d3babfafbb9f6629cfb47139758e59a5eb0d80
Author: David S. Miller <davem@davemloft.net>
Date:   Wed Dec 5 16:24:45 2012 -0500

    bridge: implement multicast fast leave

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-merge
David S. Miller [Tue, 12 Mar 2013 09:36:52 +0000 (05:36 -0400)]
Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-merge

Included changes ares:
- fix packet parsing routine to avoid to read beyond the packet boundary

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/ipv4: Ensure that location of timestamp option is stored
David Ward [Mon, 11 Mar 2013 10:43:39 +0000 (10:43 +0000)]
net/ipv4: Ensure that location of timestamp option is stored

This is needed in order to detect if the timestamp option appears
more than once in a packet, to remove the option if the packet is
fragmented, etc. My previous change neglected to store the option
location when the router addresses were prespecified and Pointer >
Length. But now the option location is also stored when Flag is an
unrecognized value, to ensure these option handling behaviors are
still performed.

Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agocxgb4: Allow for backward compatibility with new VPD scheme.
Santosh Rastapur [Fri, 8 Mar 2013 03:35:29 +0000 (03:35 +0000)]
cxgb4: Allow for backward compatibility with new VPD scheme.

New scheme calls for 3rd party VPD at offset 0x0 and Chelsio VPD at offset
0x400 of the function.  If no 3rd party VPD is present, then a copy of
Chelsio's VPD will be at offset 0x0 to keep in line with PCI spec which
requires the VPD to be present at offset 0x0.

Signed-off-by: Santosh Rastapur <santosh@chelsio.com>
Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc...
David S. Miller [Tue, 12 Mar 2013 09:14:44 +0000 (05:14 -0400)]
Merge branch 'for-davem' of git://git./linux/kernel/git/bwh/sfc-next

Ben Hutchings says:

====================
1. Merge sfc changes (only) accepted for 3.9.

2. PTP improvements from Laurence Evans.

3. Overhaul of RX buffer management:
- Always allocate pages, and enable scattering where possible
- Fit as many buffers as will fit into a page, rather than limiting to 2
- Introduce recycle rings to reduce the need for IOMMU mapping and
  unmapping

4. PCI error recovery (AER and EEH) implementation.

5. Fix a bug in RX filter replacement.

6. Fix configuration with 1 RX queue in the PF and multiple RX queues in
VFs.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoflow_dissector: support L2 GRE
Michael Dalton [Mon, 11 Mar 2013 06:52:28 +0000 (06:52 +0000)]
flow_dissector: support L2 GRE

Add support for L2 GRE tunnels, so that RPS can be more effective.

Signed-off-by: Michael Dalton <mwdalton@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobatman-adv: verify tt len does not exceed packet len
Marek Lindner [Mon, 4 Mar 2013 02:39:49 +0000 (10:39 +0800)]
batman-adv: verify tt len does not exceed packet len

batadv_iv_ogm_process() accesses the packet using the tt_num_changes
attribute regardless of the real packet len (assuming the length check
was done before). Therefore a length check is needed to avoid reading
random memory.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
11 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 11 Mar 2013 14:54:29 +0000 (07:54 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
 "Misc minor fixes mostly related to tracing"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  s390: Fix a header dependencies related build error
  tracing: update documentation of snapshot utility
  tracing: Do not return EINVAL in snapshot when not allocated
  tracing: Add help of snapshot feature when snapshot is empty
  ftrace: Update the kconfig for DYNAMIC_FTRACE

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Mon, 11 Mar 2013 14:51:59 +0000 (07:51 -0700)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Missing cancel of work items in mac80211 MLME, from Ben Greear.

 2) Fix DMA mapping handling in iwlwifi by using coherent DMA for
    command headers, from Johannes Berg.

 3) Decrease the amount of pressure on the page allocator by using order
    1 pages less in iwlwifi, from Emmanuel Grumbach.

 4) Fix mesh PS broadcast OOPS in mac80211, from Marco Porsch.

 5) Don't forget to recalculate idle state in mac80211 monitor
    interface, from Felix Fietkau.

 6) Fix varargs in netfilter conntrack handler, from Joe Perches.

 7) Need to reset entire chip when command queue fills up in iwlwifi,
    from Emmanuel Grumbach.

 8) The TX antenna value must be valid when calibrations are performed
    in iwlwifi, fix from Dor Shaish.

 9) Don't generate netfilter audit log entries when audit is disabled,
    from Gao Feng.

10) Deal with DMA unit hang on e1000e during power state transitions,
    from Bruce Allan.

11) Remove BUILD_BUG_ON check from igb driver, from Alexander Duyck.

12) Fix lockdep warning on i2c handling of igb driver, from Carolyn
    Wyborny.

13) Fix several TTY handling issues in IRDA ircomm tty driver, from
    Peter Hurley.

14) Several QFQ packet scheduler fixes from Paolo Valente.

15) When VXLAN encapsulates on transmit, we have to reset the netfilter
    state.  From Zang MingJie.

16) Fix jiffie check in net_rx_action() so that we really cap the
    processing at 2HZ.  From Eric Dumazet.

17) Fix erroneous trigger of IP option space exhaustion, when routers
    are pre-specified and we are looking to see if we can insert a
    timestamp, we will have the space.  From David Ward.

18) Fix various issues in benet driver wrt waiting for firmware to
    finish POST after resets or errors.  From Gavin Shan and Sathya
    Perla.

19) Fix TX locking in SFC driver, from Ben Hutchings.

20) Like the VXLAN fix above, when we encap in a TUN device we have to
    reset the netfilter state.  This should fix several strange crashes
    reported by Dave Jones and others.  From Eric Dumazet.

21) Don't forget to clean up MAC address resources when shutting down a
    port in mlx4 driver, from Yan Burman.

22) Fix divide by zero in vmxnet3 driver, from Bhavesh Davda.

23) Fix device statistic regression in tg3 when the driver is using
    phylib, from Nithin Sujir.

24) Fix info leak in several netlink handlers, from Mathias Krause.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (79 commits)
  6lowpan: Fix endianness issue in is_addr_link_local().
  rrunner.c: fix possible memory leak in rr_init_one()
  dcbnl: fix various netlink info leaks
  rtnl: fix info leak on RTM_GETLINK request for VF devices
  bridge: fix mdb info leaks
  tg3: Update link_up flag for phylib devices
  ipv6: stop multicast forwarding to process interface scoped addresses
  bridging: fix rx_handlers return code
  netlabel: fix build problems when CONFIG_IPV6=n
  drivers/isdn: checkng length to be sure not memory overflow
  net/rds: zero last byte for strncpy
  bnx2x: Fix SFP+ misconfiguration in iSCSI boot scenario
  bnx2x: Fix intermittent long KR2 link up time
  macvlan: Set IFF_UNICAST_FLT flag to prevent unnecessary promisc mode.
  team: unsyc the devices addresses when port is removed
  bridge: add missing vid to br_mdb_get()
  Fix: sparse warning in inet_csk_prepare_forced_close
  afkey: fix a typo
  MAINTAINERS: Update qlcnic maintainers list
  netlabel: correctly list all the static label mappings
  ...

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Linus Torvalds [Mon, 11 Mar 2013 14:50:39 +0000 (07:50 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/rw/uml

Pull UML fixes from Richard Weinberger:
 "This update brings various fixes.
  Nothing special...

  In my local queue I have some more fixes which will be sent later to
  you.  3.9 uncovered strange UML issues.  :("

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: Use tty_port in SIGWINCH handler
  um: Use tty_port_operations->destruct
  um: fix build failure due to mess-up of sig_info protorype
  um: add missing declaration of 'getrlimit()' and friends
  net : enable tx time stamping in the vde driver.
  hostfs: fix a not needed double check

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Mon, 11 Mar 2013 14:49:37 +0000 (07:49 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "Except for the largish change to the ALPS driver adding "Dolphin V1"
  support and Wacom getting a new signature of yet another device, the
  rest are straightforward driver fixes."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: mms114 - Fix regulator enable and disable paths
  Input: ads7864 - check return value of regulator enable
  Input: tc3589x-keypad - fix keymap size
  Input: wacom - add support for 0x10d
  Input: ALPS - update documentation for recent touchpad driver mods
  Input: ALPS - add "Dolphin V1" touchpad support
  Input: ALPS - remove unused argument to alps_enter_command_mode()
  Input: cypress_ps2 - fix trackpadi found in Dell XPS12

11 years agonet: can: af_can.c: Fix checkpatch warnings
Valentin Ilie [Sun, 10 Mar 2013 11:15:13 +0000 (11:15 +0000)]
net: can: af_can.c: Fix checkpatch warnings

Replace printk(KERN_ERR with pr_err
Add space before {
Removed OOM messages

Signed-off-by: Valentin Ilie <valentin.ilie@gmail.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agos390: Fix a header dependencies related build error
Li Zefan [Thu, 7 Mar 2013 09:35:53 +0000 (17:35 +0800)]
s390: Fix a header dependencies related build error

Commit 877c685607925238e302cd3aa38788dca6c1b226
("perf: Remove include of cgroup.h from perf_event.h") caused
this build failure if PERF_EVENTS is enabled:

   In file included from arch/s390/include/asm/perf_event.h:9:0,
                    from include/linux/perf_event.h:24,
                    from kernel/events/ring_buffer.c:12:
   arch/s390/include/asm/cpu_mf.h: In function 'qctri':
   arch/s390/include/asm/cpu_mf.h:61:12: error: 'EINVAL' undeclared (first use in this function)

cpu_mf.h had an implicit errno.h dependency, which was added
indirectly via cgroups.h but not anymore. Add it explicitly.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Link: http://lkml.kernel.org/r/51385F79.7000106@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
11 years agoum: Use tty_port in SIGWINCH handler
Richard Weinberger [Mon, 11 Mar 2013 09:05:45 +0000 (10:05 +0100)]
um: Use tty_port in SIGWINCH handler

The tty below tty_port might get destroyed by the tty layer
while we hold a reference to it.
So we have to carry tty_port around...

Signed-off-by: Richard Weinberger <richard@nod.at>
11 years agoum: Use tty_port_operations->destruct
Richard Weinberger [Mon, 11 Mar 2013 09:03:42 +0000 (10:03 +0100)]
um: Use tty_port_operations->destruct

As we setup the SIGWINCH handler in tty_port_operations->activate
it makes sense to tear down it in ->destruct.

Signed-off-by: Richard Weinberger <richard@nod.at>
11 years agoum: fix build failure due to mess-up of sig_info protorype
Sergei Trofimovich [Sat, 29 Dec 2012 22:37:31 +0000 (01:37 +0300)]
um: fix build failure due to mess-up of sig_info protorype

arch/um/os-Linux/signal.c:18:8: error: conflicting types for 'sig_info'
In file included from /home/slyfox/linux-2.6/arch/um/os-Linux/signal.c:12:0:
arch/um/include/shared/as-layout.h:64:15: note: previous declaration of 'sig_info' was here

Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
CC: Jeff Dike <jdike@addtoit.com>
CC: Richard Weinberger <richard@nod.at>
CC: "Martin Pärtel" <martin.partel@gmail.com>
CC: Al Viro <viro@zeniv.linux.org.uk>
CC: user-mode-linux-devel@lists.sourceforge.net
CC: user-mode-linux-user@lists.sourceforge.net
CC: linux-kernel@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
11 years agoum: add missing declaration of 'getrlimit()' and friends
Sergei Trofimovich [Sat, 29 Dec 2012 22:37:30 +0000 (01:37 +0300)]
um: add missing declaration of 'getrlimit()' and friends

arch/um/os-Linux/start_up.c: In function 'check_coredump_limit':
arch/um/os-Linux/start_up.c:338:16: error: storage size of 'lim' isn't known
arch/um/os-Linux/start_up.c:339:2: error: implicit declaration of function 'getrlimit' [-Werror=implicit-function-declaration]

Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
CC: Jeff Dike <jdike@addtoit.com>
CC: Richard Weinberger <richard@nod.at>
CC: Al Viro <viro@zeniv.linux.org.uk>
CC: user-mode-linux-devel@lists.sourceforge.net
CC: user-mode-linux-user@lists.sourceforge.net
CC: linux-kernel@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
11 years agonet : enable tx time stamping in the vde driver.
Paul Chavent [Thu, 6 Dec 2012 15:25:05 +0000 (16:25 +0100)]
net : enable tx time stamping in the vde driver.

This new version moves the skb_tx_timestamp in the main uml
driver. This should avoid the need to call this function in each
transport (vde, slirp, tuntap, ...). It also add support for ethtool
get_ts_info.

Signed-off-by: Paul Chavent <paul.chavent@onera.fr>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
11 years agohostfs: fix a not needed double check
Marco Stornelli [Sat, 20 Oct 2012 10:02:59 +0000 (12:02 +0200)]
hostfs: fix a not needed double check

With the commit 3be2be0a32c18b0fd6d623cda63174a332ca0de1 we removed vmtruncate,
but actaully there is no need to call inode_newsize_ok() because the checks are
already done in inode_change_ok() at the begin of the function.

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
11 years agoInput: mms114 - Fix regulator enable and disable paths
Mark Brown [Mon, 4 Mar 2013 04:21:30 +0000 (20:21 -0800)]
Input: mms114 - Fix regulator enable and disable paths

When it uses regulators the mms114 driver checks to see if it managed to
acquire regulators and ignores errors. This is not the intended usage and
not great style in general.

Since the driver already refuses to probe if it fails to allocate the
regulators simply make the enable and disable calls unconditional and
add appropriate error handling, including adding cleanup of the
regulators if setup_reg() fails.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
11 years agoInput: ads7864 - check return value of regulator enable
Mark Brown [Mon, 4 Mar 2013 04:19:07 +0000 (20:19 -0800)]
Input: ads7864 - check return value of regulator enable

At least print a warning if we can't power the device up.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
11 years agoInput: tc3589x-keypad - fix keymap size
Rabin Vincent [Sun, 10 Mar 2013 00:17:20 +0000 (16:17 -0800)]
Input: tc3589x-keypad - fix keymap size

The keymap size used by tc3589x is too low, leading to the driver
overwriting other people's memory.  Fix this by making the driver
use the automatically allocated keymap provided by
matrix_keypad_build_keymap() instead of allocating one on its own.

Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
11 years agoLinux 3.9-rc2
Linus Torvalds [Sun, 10 Mar 2013 23:54:19 +0000 (16:54 -0700)]
Linux 3.9-rc2

11 years agoRevert "eicon: Fixed checkpatch warning"
David S. Miller [Sun, 10 Mar 2013 21:48:26 +0000 (17:48 -0400)]
Revert "eicon: Fixed checkpatch warning"

This reverts commit e41eef8f317a4cfe43ec4de2527703a2e6f16087.

It breaks the build, this symbol is refernced
by debugging macros in diddfunc.c

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agotcp: Remove unused tw_cookie_values from tcp_timewait_sock
Christoph Paasch [Sun, 10 Mar 2013 05:18:39 +0000 (05:18 +0000)]
tcp: Remove unused tw_cookie_values from tcp_timewait_sock

tw_cookie_values is never used in the TCP-stack.

It was added by 435cf559f (TCPCT part 1d: define TCP cookie option,
extend existing struct's), but already at that time it was not used at
all, nor mentioned in the commit-message.

Signed-off-by: Christoph Paasch <christoph.paasch@uclouvain.be>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobcm63xx_enet: properly prepare/unprepare clocks before/after usage
Jonas Gorski [Sun, 10 Mar 2013 03:57:49 +0000 (03:57 +0000)]
bcm63xx_enet: properly prepare/unprepare clocks before/after usage

Use clk_prepare_enable/disable_unprepare calls in preparation for
switching to the generic clock framework.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobcm63xx_enet: use managed memory allocations
Jonas Gorski [Sun, 10 Mar 2013 03:57:48 +0000 (03:57 +0000)]
bcm63xx_enet: use managed memory allocations

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobcm63xx_enet: use managed io memory allocations
Jonas Gorski [Sun, 10 Mar 2013 03:57:47 +0000 (03:57 +0000)]
bcm63xx_enet: use managed io memory allocations

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Acked-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoeicon: Fixed checkpatch warning
Andreea Hodea [Sun, 10 Mar 2013 02:34:36 +0000 (02:34 +0000)]
eicon: Fixed checkpatch warning

drivers/isdn/hardware/eicon/diva_didd.c:32:6: warning: symbol
'DRIVERRELEASE_DIDD' was not declared. Should it be static?

Signed-off-by: Andreea Hodea <hodea_andreea@yahoo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoipv6: introduce ip6tunnel_xmit() helper
Cong Wang [Sat, 9 Mar 2013 23:00:39 +0000 (23:00 +0000)]
ipv6: introduce ip6tunnel_xmit() helper

Similar to iptunnel_xmit(), group these operations into a
helper function.

This by the way fixes the missing u64_stats_update_begin()
and u64_stats_update_end() for 32 bit arch.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Pravin B Shelar <pshelar@nicira.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years ago6lowpan: Fix endianness issue in is_addr_link_local().
YOSHIFUJI Hideaki / 吉藤英明 [Sat, 9 Mar 2013 09:11:57 +0000 (09:11 +0000)]
6lowpan: Fix endianness issue in is_addr_link_local().

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoipv6: remove superfluous nla_data() NULL pointer checks
Mathias Krause [Sat, 9 Mar 2013 05:57:00 +0000 (05:57 +0000)]
ipv6: remove superfluous nla_data() NULL pointer checks

nla_data() cannot return NULL, so these NULL pointer checks are
superfluous.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agorrunner.c: fix possible memory leak in rr_init_one()
David Oostdyk [Fri, 8 Mar 2013 08:28:15 +0000 (08:28 +0000)]
rrunner.c: fix possible memory leak in rr_init_one()

In the event that register_netdev() failed, the rrpriv->evt_ring
allocation would have not been freed.

Signed-off-by: David Oostdyk <daveo@ll.mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agodcbnl: fix various netlink info leaks
Mathias Krause [Sat, 9 Mar 2013 05:52:21 +0000 (05:52 +0000)]
dcbnl: fix various netlink info leaks

The dcb netlink interface leaks stack memory in various places:
* perm_addr[] buffer is only filled at max with 12 of the 32 bytes but
  copied completely,
* no in-kernel driver fills all fields of an IEEE 802.1Qaz subcommand,
  so we're leaking up to 58 bytes for ieee_ets structs, up to 136 bytes
  for ieee_pfc structs, etc.,
* the same is true for CEE -- no in-kernel driver fills the whole
  struct,

Prevent all of the above stack info leaks by properly initializing the
buffers/structures involved.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agortnl: fix info leak on RTM_GETLINK request for VF devices
Mathias Krause [Sat, 9 Mar 2013 05:52:20 +0000 (05:52 +0000)]
rtnl: fix info leak on RTM_GETLINK request for VF devices

Initialize the mac address buffer with 0 as the driver specific function
will probably not fill the whole buffer. In fact, all in-kernel drivers
fill only ETH_ALEN of the MAX_ADDR_LEN bytes, i.e. 6 of the 32 possible
bytes. Therefore we currently leak 26 bytes of stack memory to userland
via the netlink interface.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobridge: fix mdb info leaks
Mathias Krause [Sat, 9 Mar 2013 05:52:19 +0000 (05:52 +0000)]
bridge: fix mdb info leaks

The bridging code discloses heap and stack bytes via the RTM_GETMDB
netlink interface and via the notify messages send to group RTNLGRP_MDB
afer a successful add/del.

Fix both cases by initializing all unset members/padding bytes with
memset(0).

Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agotunnel: use iptunnel_xmit() again
Cong Wang [Sat, 9 Mar 2013 16:38:39 +0000 (16:38 +0000)]
tunnel: use iptunnel_xmit() again

With recent patches from Pravin, most tunnels can't use iptunnel_xmit()
any more, due to ip_select_ident() and skb->ip_summed. But we can just
move these operations out of iptunnel_xmit(), so that tunnels can
use it again.

This by the way fixes a bug in vxlan (missing nf_reset()) for net-next.

Cc: Pravin B Shelar <pshelar@nicira.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm...
Linus Torvalds [Sun, 10 Mar 2013 00:51:13 +0000 (16:51 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ebiederm/user-namespace

Pull namespace bugfixes from Eric Biederman:
 "This is three simple fixes against 3.9-rc1.  I have tested each of
  these fixes and verified they work correctly.

  The userns oops in key_change_session_keyring and the BUG_ON triggered
  by proc_ns_follow_link were found by Dave Jones.

  I am including the enhancement for mount to only trigger requests of
  filesystem modules here instead of delaying this for the 3.10 merge
  window because it is both trivial and the kind of change that tends to
  bit-rot if left untouched for two months."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  proc: Use nd_jump_link in proc_ns_follow_link
  fs: Limit sys_mount to only request filesystem modules (Part 2).
  fs: Limit sys_mount to only request filesystem modules.
  userns: Stop oopsing in key_change_session_keyring

11 years agoInput: wacom - add support for 0x10d
Stephan Frank [Thu, 7 Mar 2013 22:08:50 +0000 (14:08 -0800)]
Input: wacom - add support for 0x10d

It is a Wacom device found in Fujitsu Lifebook T902.

Signed-off-by: Stephan Frank <sfrank@cs.tu-berlin.de>
Acked-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
11 years agoipip: capture inner headers during encapsulation
Pravin B Shelar [Fri, 8 Mar 2013 15:12:52 +0000 (15:12 +0000)]
ipip: capture inner headers during encapsulation

Allow IPIP to make use of tx-checksum offloading.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoipip: Use tunnel_ip_select_ident() for tunnel IP-Identification.
Pravin B Shelar [Fri, 8 Mar 2013 15:12:45 +0000 (15:12 +0000)]
ipip: Use tunnel_ip_select_ident() for tunnel IP-Identification.

tunnel_ip_select_ident() is more efficient when generating ip-header
id given inner packet is of ipv4 type.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agodrivers:net: Remove unnecessary OOM messages after netdev_alloc_skb
Joe Perches [Fri, 8 Mar 2013 15:03:25 +0000 (15:03 +0000)]
drivers:net: Remove unnecessary OOM messages after netdev_alloc_skb

Emitting netdev_alloc_skb and netdev_alloc_skb_ip_align OOM
messages is unnecessary as there is already a dump_stack
after allocation failures.

Other trivial changes around these removals:

Convert a few comparisons of pointer to 0 to !pointer.
Change flow to remove unnecessary label.
Remove now unused variable.
Hoist assignment from if.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: Bump up the version to 5.1.36
Shahed Shaikh [Fri, 8 Mar 2013 09:53:53 +0000 (09:53 +0000)]
qlcnic: Bump up the version to 5.1.36

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: Fix ethtool statistics collection
Shahed Shaikh [Fri, 8 Mar 2013 09:53:52 +0000 (09:53 +0000)]
qlcnic: Fix ethtool statistics collection

o Properly fill statistics data into buffer.
  Update buffer pointer properly after filling statistics data into buffer.

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: Fix ethtool statistics for 82xx adapter
Shahed Shaikh [Fri, 8 Mar 2013 09:53:51 +0000 (09:53 +0000)]
qlcnic: Fix ethtool statistics for 82xx adapter

o Fix miscalculation of statistics length

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: Enable LED test support for 83xx adapter
Himanshu Madhani [Fri, 8 Mar 2013 09:53:50 +0000 (09:53 +0000)]
qlcnic: Enable LED test support for 83xx adapter

o Add support for LED test on 83xx series adapters

Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: Fix endian issues in 83xx driver
Shahed Shaikh [Fri, 8 Mar 2013 09:53:49 +0000 (09:53 +0000)]
qlcnic: Fix endian issues in 83xx driver

o Split mailbox structure elements on boundary of adapter
  register size i.e. 32bit.
o Shuffle the position of structure elements based on CPU endianness.

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agodcb: fix sparse warnings
stephen hemminger [Fri, 8 Mar 2013 09:07:44 +0000 (09:07 +0000)]
dcb: fix sparse warnings

Add header with function definitions to quiet warnings and avoid future errors.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoteam: make local function static
stephen hemminger [Fri, 8 Mar 2013 09:07:43 +0000 (09:07 +0000)]
team: make local function static

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agophy: vitesse make vsc824x_add_skew static
stephen hemminger [Fri, 8 Mar 2013 09:07:42 +0000 (09:07 +0000)]
phy: vitesse make vsc824x_add_skew static

Function is only used in this file, should be static and not
an exported symbol.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoSupject: phy: make local function static
stephen hemminger [Fri, 8 Mar 2013 09:07:41 +0000 (09:07 +0000)]
Supject: phy: make local function static

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobna: fix declaration mismatch
stephen hemminger [Fri, 8 Mar 2013 09:07:40 +0000 (09:07 +0000)]
bna: fix declaration mismatch

The function is declared to take u32 but definition uses enum.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoVXLAN: Use UDP Tunnel segmention.
Pravin B Shelar [Thu, 7 Mar 2013 13:22:36 +0000 (13:22 +0000)]
VXLAN: Use UDP Tunnel segmention.

Enable TSO for VXLAN devices and use UDP_TUNNEL to offload vxlan
segmentation.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agotunneling: Add generic Tunnel segmentation.
Pravin B Shelar [Thu, 7 Mar 2013 13:21:51 +0000 (13:21 +0000)]
tunneling: Add generic Tunnel segmentation.

Adds generic tunneling offloading support for IPv4-UDP based
tunnels.
GSO type is added to request this offload for a skb.
netdev feature NETIF_F_UDP_TUNNEL is added for hardware offloaded
udp-tunnel support. Currently no device supports this feature,
software offload is used.

This can be used by tunneling protocols like VXLAN.

CC: Jesse Gross <jesse@nicira.com>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agotunneling: Capture inner mac header during encapsulation.
Pravin B Shelar [Thu, 7 Mar 2013 13:21:46 +0000 (13:21 +0000)]
tunneling: Capture inner mac header during encapsulation.

This patch adds inner mac header. This will be used in next patch
to find tunner header length. Header len is required to copy tunnel
header to each gso segment.
This patch does not change any functionality.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: Add skb_headers_offset_update helper function.
Pravin B Shelar [Thu, 7 Mar 2013 13:21:40 +0000 (13:21 +0000)]
net: Add skb_headers_offset_update helper function.

This function will be used in next VXLAN_GSO patch. This patch does
not change any functionality.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agotunnel: Inherit NETIF_F_SG for hw_enc_features.
Pravin B Shelar [Thu, 7 Mar 2013 09:28:08 +0000 (09:28 +0000)]
tunnel: Inherit NETIF_F_SG for hw_enc_features.

Inherit scatergather feature for tunnel devices to avoid
copy for TSO packets of tunneling device like GRE.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: Kill link between CSUM and SG features.
Pravin B Shelar [Thu, 7 Mar 2013 09:28:01 +0000 (09:28 +0000)]
net: Kill link between CSUM and SG features.

Earlier SG was unset if CSUM was not available for given device to
force skb copy to avoid sending inconsistent csum.
Commit c9af6db4c11c (net: Fix possible wrong checksum generation)
added explicit flag to force copy to fix this issue.  Therefore
there is no need to link SG and CSUM, following patch kills this
link between there two features.

This patch is also required following patch in series.

Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoAtmel MXT touchscreen: increase reset timeouts
Linus Torvalds [Sat, 9 Mar 2013 18:31:01 +0000 (10:31 -0800)]
Atmel MXT touchscreen: increase reset timeouts

There is a more complete atmel patch-series out by Nick Dyer that fixes
this and other things, but in the meantime this is the minimal thing to
get the touchscreen going on (at least my) Pixel Chromebook.

Not that I want my dirty fingers near that beautiful screen, but it
seems that a non-initialized touchscreen will also end up being a
constant wakeup source, so you have to disable it to go to sleep.  And
it's easier to just fix the initialization sequence.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoproc: Use nd_jump_link in proc_ns_follow_link
Eric W. Biederman [Sat, 9 Mar 2013 08:14:45 +0000 (00:14 -0800)]
proc: Use nd_jump_link in proc_ns_follow_link

Update proc_ns_follow_link to use nd_jump_link instead of just
manually updating nd.path.dentry.

This fixes the BUG_ON(nd->inode != parent->d_inode) reported by Dave
Jones and reproduced trivially with mkdir /proc/self/ns/uts/a.

Sigh it looks like the VFS change to require use of nd_jump_link
happend while proc_ns_follow_link was baking and since the common case
of proc_ns_follow_link continued to work without problems the need for
making this change was overlooked.

Cc: stable@vger.kernel.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux...
Linus Torvalds [Sat, 9 Mar 2013 01:33:20 +0000 (17:33 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs fixes from Chris Mason:
 "These are scattered fixes and one performance improvement.  The
  biggest functional change is in how we throttle metadata changes.  The
  new code bumps our average file creation rate up by ~13% in fs_mark,
  and lowers CPU usage.

  Stefan bisected out a regression in our allocation code that made
  balance loop on extents larger than 256MB."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: improve the delayed inode throttling
  Btrfs: fix a mismerge in btrfs_balance()
  Btrfs: enforce min_bytes parameter during extent allocation
  Btrfs: allow running defrag in parallel to administrative tasks
  Btrfs: avoid deadlock on transaction waiting list
  Btrfs: do not BUG_ON on aborted situation
  Btrfs: do not BUG_ON in prepare_to_reloc
  Btrfs: free all recorded tree blocks on error
  Btrfs: build up error handling for merge_reloc_roots
  Btrfs: check for NULL pointer in updating reloc roots
  Btrfs: fix unclosed transaction handler when the async transaction commitment fails
  Btrfs: fix wrong handle at error path of create_snapshot() when the commit fails
  Btrfs: use set_nlink if our i_nlink is 0