perf tests: Add missing attr stat basic test

Adding test to validate perf_event_attr data for command:
  'stat -e cycles'

Reported-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1352130579-13451-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf report: Postpone objdump check until annotation requested

David reported that current perf report refused to run on a data file
captured from a different machine because of objdump.

Since the objdump tools won't be used unless annotation was requested,
checking its presence at init time doesn't make sense.

Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Irina Tirdea <irina.tirdea@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351835406-15208-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Introduce struct hist_browser_timer

Currently various hist browser functions receive 3 arguments for
refreshing histogram but only used from a few places.  Also it's only
for perf top command so that it can be NULL for other (and probably
most) cases.  Pack them into a struct in order to reduce number of those
unused arguments.

This is a mechanical change and does not intend a functional change.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Irina Tirdea <irina.tirdea@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351835406-15208-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Use normalized arch name for searching objdump path

David reported that perf report for i686 target data on x86_64 host
failed to work because it tried to find out cross-compiled objdump.

However objdump for x86_64 is compatible to i686 so that it doesn't need
to do it at all.  To prevent similar artifacts, normalize arch name when
comparing host and file architectures.

Reported-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Irina Tirdea <irina.tirdea@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351835406-15208-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add documentation for attr tests

Adding documentation for attr tests.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-26-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add attr stat default test

Adding test to validate perf_event_attr data for commands:
  'stat -d'
  'stat -dd'
  'stat -ddd'

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-24-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add attr stat default test

Adding test to validate perf_event_attr data for command:
  'stat'

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-23-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add attr stat event syntax group test

Adding test to validate perf_event_attr data for command:
  'stat -e {cycles,instructions}'

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-22-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add attr stat group test

Adding test to validate perf_event_attr data for command:
  'stat --group -e cycles,instructions'

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-21-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add attr stat no-inherit test

Adding test to validate perf_event_attr data for command:
  'stat -i'

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-20-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add attr record branch filter tests

Adding test to validate perf_event_attr data for command:
  'record -j any'
  'record -j any_call'
  'record -j any_ret'
  'record -j hv'
  'record -j ind_call'
  'record -j k'
  'record -j u'

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-18-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add attr record branch any test

Adding test to validate perf_event_attr data for command:
  'record -b'

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-17-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add attr record no delay test

Adding test to validate perf_event_attr data for command:
  'record -D'

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-16-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add attr record raw test

Adding test to validate perf_event_attr data for command:
  'record -R'

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-15-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add attr record data test

Adding test to validate perf_event_attr data for command:
  'record -d'

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-14-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add attr record no-inherit test

Adding test to validate perf_event_attr data for command:
  'record -i'

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-13-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add attr record no samples test

Adding test to validate perf_event_attr data for command:
  'record -n'

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-12-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add attr record period test

Adding test to validate perf_event_attr data for command:
  'record -c 100 -P'

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-11-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add attr record graph test

Adding tests to validate perf_event_attr data for commands:
  'record -g --'
  'record -g fp
  'record -g dwarf

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-10-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add attr record count test

Adding test to validate perf_event_attr data for command:
  'record -c 123'

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-9-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add attr record freq test

Adding test to validate perf_event_attr data for command:
  'record -F 100'

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-8-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add attr record event syntax group test

Adding test to validate perf_event_attr data for command:
  'record group -e {cycles,instructions}'

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-7-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add attr record group test

Adding test to validate perf_event_attr data for command:
  'record --group -e cycles,instructions'

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-6-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add attr tests under builtin test command

The test attr suite is run only if it's run under perf source directory,
or tests are found in installed path.

Otherwise tests are omitted (notification is displayed) and finished as
successful.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-25-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add attr record basic test

Adding test to validate perf_event_attr data for command:
  'record'

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add framework for automated perf_event_attr tests

The idea is run perf session with kidnapping sys_perf_event_open
function. For each sys_perf_event_open call we store the perf_event_attr
data to the file to be checked later against what we expect.

You can run this by:
  $ python ./tests/attr.py -d ./tests/attr/ -p ./perf -v

v2 changes:
  - preserve errno value in the hook

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20121031145247.GB1027@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Move test objects into 'tests' directory

Separating test objects into 'tests' directory.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf browser: Don't show scripts menu for 'perf top'

As 'perf top' has no data files to run scripts against. Also add a
is_report_browser() helper function to judge whether the running browser
is for 'perf report'.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351699257-5102-1-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Remove BINDIR define from exec_cmd.o compilation

It's not needed.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351634526-1516-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf annotate: Handle XBEGIN like a jump

So that the browser still shows the abort label.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1351643663-23828-18-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Handle --version string generation on machines without git

If git is installed we'll have a 'perf --version' output of this form:

$ make -j8 -C tools/perf/ O=/home/acme/git/build/perf install
$ perf --version
perf version 3.7.rc3.g3afad6

Now on a machine without git installed:

$ mv  /home/acme/bin/git /home/acme/bin/git.OFF
$ make -j8 -C tools/perf/ O=/home/acme/git/build/perf install
$ perf --version
perf version 3.7.0-rc2

That is, no error message due to git not being installed will appear on the
screen and instead the version string in the top level Makefile will be
used.

Requested-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-am6yp6phvxyjmyndxogpunjv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Further speed up the perf build

There's another source of overhead in the perf version string generator:

   git update-index -q --refresh

... which will iterate the whole checked out tree. This can be pretty
slow on NFS volumes, but takes some time even with local SSD disks and a
fully cached kernel tree:

 $ perf stat --null --repeat 3 --pre "rm -f PERF-VERSION-FILE" util/PERF-VERSION-GEN
 PERF_VERSION = 3.7.rc3.g5399b3b.dirty
 PERF_VERSION = 3.7.rc3.g5399b3b.dirty
 PERF_VERSION = 3.7.rc3.g5399b3b.dirty

 Performance counter stats for 'util/PERF-VERSION-GEN' (3 runs):

       0.306999221 seconds time elapsed                                          ( +-  0.56% )

So remove the .dirty differentiator as well - it adds little information
because locally patched git trees are common, but seldom are the perf
tools modified.

So a lot of version strings are reported as 'dirty' while in fact they
are pristine perf builds. For example 99% of my perf builds are not
patched but the kernel tree is slightly patched, which adds the .dirty
tag.

Eliminating that tag speeds up version generation by another order of
magnitude:

 $ perf stat --null --repeat 3 --sync --pre "rm -f PERF-VERSION-FILE" util/PERF-VERSION-GEN
 PERF_VERSION = 3.7.rc3.g4b0bd3
 PERF_VERSION = 3.7.rc3.g4b0bd3
 PERF_VERSION = 3.7.rc3.g4b0bd3

 Performance counter stats for 'util/PERF-VERSION-GEN' (3 runs):

       0.021270923 seconds time elapsed                                          ( +-  1.94% )

(Also clean up some of the comments around this code.)

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20121030085441.GC8245@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Speed up the perf build time by simplifying the perf --version string generation

Building perf is pretty slow on trees that have a lot of commits
relative to the nearest Git tag. This slowness manifests itself during
version string generation:

 $ perf stat --null --repeat 3 --sync --pre "rm -f PERF-VERSION-FILE" util/PERF-VERSION-GEN
 PERF_VERSION = 3.7.rc3.1458.g5399b3b
 PERF_VERSION = 3.7.rc3.1458.g5399b3b
 PERF_VERSION = 3.7.rc3.1458.g5399b3b

 Performance counter stats for 'util/PERF-VERSION-GEN' (3 runs):

       2.857503976 seconds time elapsed                                          ( +-  0.22% )

The build can be even slower than that, when one over NFS volumes.

The reason for the slowness is that util/PERF-VERSION-GEN uses "git
describe" to generate the string, which has to count the "number of
commits distance" from the nearest tag - the ".1458." count in the
output above. For that Git had to extract and decompress 1458 Git
objects, which takes time and bandwidth.

But this "number of commits" value is mostly irrelevant in practice. We
either want to know an approximate tag name, or we want to know the
precise sha1.

So this patch simplifies the version string to:

 PERF_VERSION = 3.7.rc3.g5399b3b.dirty

which speeds up the version string generation script by an order of
magnitude:

 $ perf stat --null --repeat 3 --sync --pre "rm -f PERF-VERSION-FILE" util/PERF-VERSION-GEN
 PERF_VERSION = 3.7.rc3.g5399b3b.dirty
 PERF_VERSION = 3.7.rc3.g5399b3b.dirty
 PERF_VERSION = 3.7.rc3.g5399b3b.dirty

 Performance counter stats for 'util/PERF-VERSION-GEN' (3 runs):

       0.307633559 seconds time elapsed                                          ( +-  0.84% )

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20121030084600.GB8245@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add info about cross compiling for Android ARM

Without defining ARCH=arm, building perf for Android ARM will fail,
because it needs architecture specific files.

So add related relevant information to the android documentation.

Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Irina Tirdea <irina.tirdea@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1351518066-4791-1-git-send-email-js1304@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Warn about missing libelf

When perf detects no libelf during the build, it'll use internal mini
elf parser instead of libelf.  But as it only supports minimal
functionalities, it also disables support to 'probe' builtin command.

Currently it didn't warned to user.  Fix it.

$ sudo apt-get remove libelf-dev
$ make
    CHK -fstack-protector-all
    CHK -Wstack-protector
    CHK -Wvolatile-register-var
    CHK bionic
    CHK libelf
    CHK glibc
Makefile:491: No libelf found, disables 'probe' tool, please install elfutils-libelf-devel/libelf-dev
    CHK libunwind
    CHK libaudit

$ make NO_LIBELF=1
    CHK -fstack-protector-all
    CHK -Wstack-protector
    CHK -Wvolatile-register-var
    CHK bionic
    CHK libaudit

Reported-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-8ww8zc4hhpxabfskxs3u5ede@git.kernel.org
[ committer note: The package needed is elfutils-libelf-devel, not elfutils-devel ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf/x86: Fix sparse warnings

FYI, there are new sparse warnings:

 arch/x86/kernel/cpu/perf_event.c:1356:18: sparse: symbol 'events_attr' was not declared. Should it be static?

This patch makes it static and also adds the static keyword to
fix arch/x86/kernel/cpu/perf_event.c:1344:9: warning: symbol
'events_sysfs_show' was not declared.

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Cc: fengguang.wu@intel.com
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-lerdpXlnruh0yvWs2owwuizl@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements, fixes and code move from Arnaldo Carvalho de Melo:

 * Initialize 'page_size' variable in the python binding, this was sent
   for perf/urgent by mistake, then when merging Ingo removed it, fixing
   the problem for perf/urgent, but when perf/urgent was merged with
   perf/core, where that initialization is needed, made the python
   binding mmap call to fail, fix it by initializing page_size again.

 * Add a browser for 'perf script' and make it available from the report
   and annotate browsers. It does filtering to find the scripts that
   handle events found in the perf.data file used. From Feng Tang

 * Move some functions from symbol.c to more appropriate files, creating
   dso.[ch] in the process, no code changes. From Jiri Olsa

 * Fix mmap error output message for when perf_mmap fails and returns
   !-EPERM, where the default for mmap_pages, INT_MAX, was causing a
   !power of 2 error message, fix from Jiri Olsa.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf python: Initialize 'page_size' variable

The commit 0c1fe6b:

 'perf tools: Have the page size value available for all tools'

Broke the python binding because the global variable 'page_size' is
initialized on the main() routine, that is not called when using
just the python binding, causing evlist.mmap() to fail because it
expects that variable to be initialized to the system's page size.

Fix it by initializing it on the binding init routine.

Reported-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vrvp3azmbfzexnpmkhmvtzzc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf record: Fix mmap error output condition

The mmap_pages default value is not power of 2 (UINT_MAX).

Together with perf_evlist__mmap function returning error value different
from EPERM, we get misleading error message: "--mmap_pages/-m value must
be a power of two."

Fixing this by adding extra check for UINT_MAX value for this error
condition.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1350743599-4805-12-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf header: Add is_perf_magic() func

With this function, other modules can basically check whether a file is
a legal perf data file by checking its first 8 bytes against all
possible perf magic numbers.

Change the function name from check_perf_magic to more meaningful
is_perf_magic as suggested by acme.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-7-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists browser: Integrate script browser into main hists browser

Integrate the script browser into "perf report" framework, users can use
function key 'r' or the drop down menu to list all perf scripts and
select one of them, just like they did for the annotation.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-6-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf annotate browser: Integrate script browser into annotation browser

Integrate the script browser into annotation, users can press function
key 'r' to list all perf scripts and select one of them to run that
script, the output will be shown in a separate browser.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-5-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf scripts browser: Add a browser for perf script

Create a script browser, so that user can check all the available
scripts for current perf data file and run them inside the main perf
report or annotation browsers, for all perf samples or for samples
belong to one thread/symbol.

Please be noted: current script browser is only for report use, and
doesn't cover the record phase, IOW it must run against one existing
perf data file.

The work flow is, users can use function key to list all the available
scripts for current perf data file in system and chose one, which will
be executed with popen("perf script -s xxx.xx",) and all the output
lines are put into one ui browser, pressing 'q' or left arrow key will
make it return to previous browser.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-4-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script: Add more filter to find_scripts()

As suggested by Arnaldo, many scripts have their own usages and need
capture specific events or tracepoints, so only those scripts whose
target events match the events in current perf data file should be
listed in the script browser menu.

This patch will add the event match checking, by opening "xxx-record"
script to cherry pick out all events name and comparing them with
those inside the perf data file.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-3-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add a global variable "const char *input_name"

Currently many perf commands annotate/evlist/report/script/lock etc all
support "-i" option to chose a specific perf data, and all of them
create a local "input_name" to save the file name for that perf data.

Since most of these commands need it, we can add a global variable for
it, also it can some other benefits:

1. When calling script browser inside hists/annotation browser, it needs
to know the perf data file name to run that script.

2. For further feature like runtime switching to another perf data file,
this variable can also help.

Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1351569369-26732-2-git-send-email-feng.tang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Move dso_* related functions into dso object

Moving dso_* related functions into dso object.

Keeping symbol loading related functions still in the symbol object as
it seems more convenient.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-6-git-send-email-jolsa@redhat.com
[ committer note: Use "symbol.h" instead of <symbol.h> to make it build with O= ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Move strxfrchar into string object

Moving strxfrchar function into string object.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Move hex2u64 into util object

Moving hex2u64 function into util object.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Move BUILD_ID_SIZE into build-id object

Moving BUILD_ID_SIZE define into build-id object, plus include related
changes.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Move build_id__sprintf into build-id object

Moving build_id__sprintf function into build-id object.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Namhyung Kim <namhyung@kernel.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351372712-21104-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Move parse_events error printing to parse_events_options

The callers of parse_events usually have their own error handling.  Move
the fprintf for a bad event to parse_events_options, which is the only
one who should need it.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1351283415-13170-25-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements from Arnaldo Carvalho de Melo:

 * perf inject changes to allow showing where a task sleeps, from Andrew Vagin.

 * Makefile improvements from Namhyung Kim.

 * Add --pre and --post command hooks in 'stat', from Peter Zijlstra.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf stat: Add --pre and --post command

In order to measure kernel builds, one has to do some pre/post cleanup
work in order to do the repeat build.

So provide --pre and --post command hooks to allow doing just that.

  perf stat --repeat 10 --null --sync --pre 'make -s O=defconfig-build/clean' \
-- make -s -j64 O=defconfig-build/ bzImage

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Stephane Eranian <eranian@gmail.com>
Link: http://lkml.kernel.org/r/1350992414.13456.5.camel@twins
[ committer note: Added respective entries in Documentation/perf-stat.txt ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf inject: Mark a dso if it's used

Otherwise they will be not written in an output file.

Signed-off-by: Andrew Vagin <avagin@openvz.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344344165-369636-5-git-send-email-avagin@openvz.org
[ committer note: Fixed up wrt changes made in the immediate previous patches ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf inject: Merge sched_stat_* and sched_switch events

You may want to know where and how long a task is sleeping. A callchain
may be found in sched_switch and a time slice in stat_iowait, so I add
handler in perf inject for merging this events.

My code saves sched_switch event for each process and when it meets
stat_iowait, it reports the sched_switch event, because this event
contains a correct callchain. By another words it replaces all
stat_iowait events on proper sched_switch events.

I use the next sequence of commands for testing:

  perf record -e sched:sched_stat_sleep -e sched:sched_switch \
      -e sched:sched_process_exit -g -o ~/perf.data.raw \
      ~/test-program
  perf inject -v -s -i ~/perf.data.raw -o ~/perf.data
  perf report --stdio -i ~/perf.data
   100.00% foo  [kernel.kallsyms]  [k] __schedule
                |
                --- __schedule
                    schedule
                   |
                   |--79.75%-- schedule_hrtimeout_range_clock
                   |          schedule_hrtimeout_range
                   |          poll_schedule_timeout
                   |          do_select
                   |          core_sys_select
                   |          sys_select
                   |          system_call_fastpath
                   |          __select
                   |          __libc_start_main
                   |
                    --20.25%-- do_nanosleep
                              hrtimer_nanosleep
                              sys_nanosleep
                              system_call_fastpath
                              __GI___libc_nanosleep
                              __libc_start_main

 And here is test-program.c:

 #include<unistd.h>
 #include<time.h>
 #include<sys/select.h>

 int main()
 {
struct timespec ts1;
struct timeval tv1;
int i;
long s;

for (i = 0; i <  10; i++) {
ts1.tv_sec = 0;
ts1.tv_nsec = 10000000;
nanosleep(&ts1, NULL);

tv1.tv_sec = 0;
tv1.tv_usec = 40000;
select(0, NULL, NULL, NULL,&tv1);
}
return 1;
 }

Signed-off-by: Andrew Vagin <avagin@openvz.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344344165-369636-4-git-send-email-avagin@openvz.org
[ committer note: Made it use evsel->handler ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf inject: Work with files

Before this patch "perf inject" can only handle data from pipe.

I want to use "perf inject" for reworking events. Look at my following patch.

v2: add information about new options in tools/perf/Documentation/

Signed-off-by: Andrew Vagin <avagin@openvz.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1344344165-369636-2-git-send-email-avagin@openvz.org
[ committer note: fixed it up to cope with 5852a44, 5ded57a, 002439e & f62d3f0 ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix LIBELF_MMAP checking

Currently checking mmap support in libelf failed due to wrong flags.

    CHK libelf
    CHK libdw
    CHK libunwind
    CHK -DLIBELF_MMAP
/tmp/ccYJwdR0.o: In function `main':
:(.text+0x18): undefined reference to `elf_begin'
collect2: error: ld returned 1 exit status

This cannot happen since we checked the elf_begin() when checking
libelf and it succeeded.

Fix it by using a same flag with libelf checking.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351241752-2919-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Always show CHK message when doing try-cc

It might be useful to see what's happening behind us rather than just
waiting few seconds during the config checking.

Also align the CHK message with other ones.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351241752-2919-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Convert invocation of MAKE into SUBDIR

This will show directory change info in a consistent form.  Also it can
be converted again into David Howell's descend command.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351241752-2919-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Cleanup doc related targets

Documentation targets handling rules are duplicate.  Consolidate them
with DOC_TARGETS and INSTALL_DOC_TARGETS.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1351241752-2919-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools lib traceevent: Do not generate dependency for system header files

Ingo reported (again!) that 'make clean' on perf/traceevent does not
work due to some reason with system header file. Quotes Ingo:

 "Note that the old dependency related build failure thought to be
  fixed in commit 860df5833e46 is back:

   make[1]: *** No rule to make target
   `/usr/lib/gcc/x86_64-redhat-linux/4.7.0/include/stddef.h', needed by `.trace-seq.d'.  Stop.

  'make clean' itself does not work in libtraceevent:

   comet:~/tip/tools/lib/traceevent> make clean
   make: *** No rule to make target `/usr/lib/gcc/x86_64-redhat-linux/4.7.0/include/stddef.h', needed by `.trace-seq.d'.  Stop.

  So I had to clean it out manually:

   comet:~/tip/tools/lib/traceevent> git ls-files --others | xargs rm
   comet:~/tip/tools/lib/traceevent>

  and then things build fine."

Try to fix it by excluding system headers from dependency generation.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reported-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@amd64.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1351241752-2919-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core trace improvements from Arnaldo Carvalho de Melo:

 * Don't stop synthesizing threads when one vanishes, this is for
   the existing threads when we start a tool like trace.

 * Use sched:sched_stat_runtime to provide a thread summary, this
   produces the same output as the 'trace summary' subcommand of
   tglx's original "trace" tool.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf trace: Use sched:sched_stat_runtime to provide a thread summary

[root@sandy ~]# perf trace --sched --duration 0.100 --pid `pidof firefox`
<SNIP>
 17079.847 ( 0.009 ms): 17643 poll(ufds: 140037623086496, nfds: 11, timeout_msecs: 0) = 0 Timeout
 17079.892 ( 0.010 ms): 17643 read(fd: 4, buf: 140038178943092, count: 4096         ) = -1 EAGAIN Resource temporarily unavailable
 17079.921 ( 0.013 ms): 17643 poll(ufds: 140037623086496, nfds: 11, timeout_msecs: 0) = 0 Timeout
 17079.949 ( 0.009 ms): 17643 read(fd: 4, buf: 140038178943092, count: 4096         ) = -1 EAGAIN Resource temporarily unavailable
^C
 _____________________________________________________________________
 __)    Summary of events    (__

              [ task - pid ]     [ events ] [ ratio ]  [ runtime ]
 _____________________________________________________________________

             firefox - 17643 :      18013   [ 72.2% ]    359.110 ms
             firefox - 17663 :         41   [  0.2% ]     21.439 ms
             firefox - 17664 :       6840   [ 27.4% ]    133.642 ms
             firefox - 17667 :         46   [  0.2% ]      0.682 ms
[root@sandy ~]#

This is equivalent to the 'perf trace summary' subcomand in the tmp.perf/trace2
branch.

Another example, setting a huge duration filter to get just a system
wide summary:

[root@sandy ~]# perf trace --duration 10000.0 --sched
^C
 _____________________________________________________________________
 __)    Summary of events    (__

              [ task - pid ]     [ events ] [ ratio ]  [ runtime ]
 _____________________________________________________________________

           scsi_eh_1 - 258   :         15   [  0.0% ]      0.133 ms
        kworker/0:1H - 322   :         13   [  0.0% ]      0.032 ms
         jbd2/dm-0-8 - 384   :          4   [  0.0% ]      0.115 ms
         flush-253:0 - 470   :          1   [  0.0% ]      0.027 ms
             firefox - 950   :       4783   [  0.1% ]     24.863 ms
             firefox - 992   :       1883   [  0.1% ]      6.808 ms
             firefox - 995   :         35   [  0.0% ]      0.111 ms
         ksoftirqd/6 - 4362  :          2   [  0.0% ]      0.005 ms
         ksoftirqd/7 - 4365  :          1   [  0.0% ]      0.007 ms
                Xorg - 4671  :        148   [  0.0% ]      0.912 ms
     gnome-settings- - 4846  :         14   [  0.0% ]      0.086 ms
     seahorse-daemon - 4847  :         14   [  0.0% ]      0.092 ms
         gnome-panel - 4875  :         46   [  0.0% ]      0.159 ms
     gnome-power-man - 4918  :         16   [  0.0% ]      0.065 ms
     gvfs-afc-volume - 4992  :         77   [  0.0% ]      0.136 ms
     gnome-screensav - 5114  :         24   [  0.0% ]      0.128 ms
               xchat - 8082  :        466   [  0.0% ]      2.019 ms
            synergyc - 8369  :        941   [  0.0% ]      3.291 ms
            synergyc - 8371  :         85   [  0.0% ]      1.817 ms
         jbd2/dm-4-8 - 9352  :          4   [  0.0% ]      0.109 ms
             rpcbind - 9786  :          3   [  0.0% ]      0.017 ms
        rtkit-daemon - 12802 :         10   [  0.0% ]      0.038 ms
        rtkit-daemon - 12803 :          8   [  0.0% ]      0.000 ms
       udisks-daemon - 13020 :         27   [  0.0% ]      0.240 ms
         kworker/7:0 - 14651 :        669   [  0.0% ]      2.616 ms
         kworker/5:1 - 16220 :          2   [  0.0% ]      0.069 ms
         kworker/4:0 - 19776 :         13   [  0.0% ]      0.176 ms
             openvpn - 20131 :        133   [  0.0% ]      0.762 ms
     plugin-containe - 20508 :      60658   [  1.7% ]    131.153 ms
        npviewer.bin - 20520 :      72208   [  2.0% ]    138.945 ms
        npviewer.bin - 20542 :         35   [  0.0% ]      0.074 ms
        npviewer.bin - 20543 :         30   [  0.0% ]      0.074 ms
        npviewer.bin - 20547 :         35   [  0.0% ]      0.092 ms
        npviewer.bin - 20552 :         35   [  0.0% ]      0.093 ms
                sshd - 20645 :         32   [  0.0% ]      0.071 ms
        npviewer.bin - 21053 :         35   [  0.0% ]      0.074 ms
        npviewer.bin - 21054 :         35   [  0.0% ]      0.097 ms
         kworker/0:2 - 21169 :        149   [  0.0% ]      1.143 ms
         kworker/3:0 - 22171 :        113   [  0.0% ]     96.892 ms
         flush-253:4 - 22410 :          1   [  0.0% ]      0.028 ms
         kworker/6:0 - 24581 :         25   [  0.0% ]      0.275 ms
         kworker/1:0 - 25572 :          4   [  0.0% ]      0.103 ms
         kworker/2:1 - 26299 :        138   [  0.0% ]      1.440 ms
         kworker/0:0 - 26325 :          1   [  0.0% ]      0.003 ms
                perf - 26330 :    3506967   [ 96.1% ]   6648.310 ms
[root@sandy ~]#

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/tip-mzuli0srnxyi1o029py6537x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf trace: Count number of events for each thread and globally

The nr_events in trace__run was local, but we will need it in other
trace methods, move it to struct trace.

We'll also need the number of events per thread, so introduce a
nr_events method for that in struct thread_trace.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ksutaz0mtejnf7e6az3ca1td@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Don't stop synthesizing threads when one vanishes

The perf_event__synthesize_threads routine synthesizes all the existing
threads in the system, because we don't have any kernel facilities to
ask for PERF_RECORD_{FORK,MMAP,COMM} for existing threads.

It was returning an error as soon as one thread couldn't be synthesized,
which is a bit extreme when, for instance, a forkish workload is
running, like a kernel compile.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-i7oas1eodpoer2bx38fwyasv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

 * Align the 'Ok'/'FAILED!' test results in 'perf test.

 * Support interrupted syscalls in 'trace'

 * Add an event duration column and filter in 'trace'.

 * There are references to the man pages in some tools, so try to build
   Documentation when installing, warning the user if that is not possible,
   from Borislav Petkov.

 * Give user better message if precise is not supported, from David Ahern.

 * Try to find cross-built objdump path by using the session environment
   information in the perf.data file header, from Irina Tirdea, original
   patch and idea by Namhyung Kim.

 * Diplays more output on features check for make V=1, so that one can figure
   out what is happening by looking at gcc output, etc. From Jiri Olsa.

 * Account the nr_entries in rblist properly, fix by Suzuki K. Poulose.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Try to build Documentation when installing

There's a portion in the "perf list" output refering to the exact
specification of raw hardware events.

Since this description is in the perf-list manpage, try to build and
install the man pages, warning the user when that is not possible
due to missing packages (xmlto and asciidoc).

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-ij71ysszkdvz3fy3wr331bke@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf trace: Print the name of a syscall when failing to read its info

When failing to read the tracepoint event format, like currently with
sys_execve, that is not defined via SYSCALL_DEFINE macros and thus
doesn't have an entry in:

  $ ls -d /sys/kernel/debug/tracing/events/syscalls/sys_enter_*exec*
  /sys/kernel/debug/tracing/events/syscalls/sys_enter_kexec_load
  $

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/tip-`ranpwd
Link: http://lkml.kernel.org/n/tip-q3ak0j8b81yxylykq5wp2uwi@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Pretty print errno for some more functions

This time: access, open and socket.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-e19dmpz8zxqo2uebxnp7ilkf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf trace: Add duration filter

Example:

[acme@sandy linux]$ perf trace --duration 0.025 usleep 1
     2.221 ( 0.958 ms): 6724 execve(arg0: 140733557168278, arg1: 140733557178768, arg2: 16134304, arg3: 140733557167840, arg4: 7955998171588342573, arg5: 6723) = -2
     3.690 ( 1.443 ms): 6724 execve(arg0: 140733557168295, arg1: 140733557178768, arg2: 16134304, arg3: 140733557167840, arg4: 7955998171588342573, arg5: 6723) = 0
     3.979 ( 0.048 ms): 6724 open(filename: 208733843841, flags: 0, mode: 1                        ) = 3
     4.071 ( 0.075 ms): 6724 open(filename: 139744419925673, flags: 0, mode: 0                     ) = 3
     4.318 ( 0.056 ms): 6724 nanosleep(rqtp: 140734030404608, rmtp: 0                              ) = 0
[acme@sandy linux]$ perf trace --duration 0.100 usleep 1
     1.143 ( 1.021 ms): 6726 execve(arg0: 140736323962279, arg1: 140736323972752, arg2: 34926752, arg3: 140736323961824, arg4: 7955998171588342573, arg5: 6725) = 0
[acme@sandy linux]$

Cherry picked from tmp.perf/trace2 branch.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/tip-oslw2j2958we9qf0ctra4whd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf trace: Add an event duration column

 # perf trace usleep 1 | tail -10
     0.453 ( 0.002 ms): mmap(addr: 0, len: 4096, prot: 3, flags: 34, fd: 4294967295, off: 0   ) = -763342848
     0.456 ( 0.001 ms): mmap(addr: 0, len: 4096, prot: 3, flags: 34, fd: 4294967295, off: 0   ) = -763346944
     0.459 ( 0.001 ms): arch_prctl(option: 4098, arg2: 140126839658240, arg3: 140126839652352, arg4: 34, arg5: 4294967295) = 0
     0.473 ( 0.003 ms): mprotect(start: 208741634048, len: 16384, prot: 1                     ) = 0
     0.477 ( 0.003 ms): mprotect(start: 208735956992, len: 4096, prot: 1                      ) = 0
     0.483 ( 0.004 ms): munmap(addr: 140126839664640, len: 91882                              ) = 0
     0.540 ( 0.001 ms): brk(brk: 0                                                            ) = 31928320
     0.542 ( 0.002 ms): brk(brk: 32063488                                                     ) = 32063488
     1.456 ( 0.901 ms): nanosleep(rqtp: 140735472817168, rmtp: 0                              ) = 0
     1.462 ( 0.000 ms): exit_group(error_code: 0
 #

This also comes from the tmp.perf/trace2 branch.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/n/tip-g9akh5hjw2kvjerpo9xror6f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf trace: Support interrupted syscalls

Using the same strategies as in the tmp.perf/trace2, i.e. the 'trace'
tool implemented by tglx, just updated to the current codebase.

Example:

[root@sandy linux]# perf trace usleep 1  | tail
     2.003: mmap(addr: 0, len: 4096, prot: 3, flags: 34, fd: 4294967295, off: 0   ) = -2128396288
     2.017: mmap(addr: 0, len: 4096, prot: 3, flags: 34, fd: 4294967295, off: 0   ) = -2128400384
     2.029: arch_prctl(option: 4098, arg2: 140146949441280, arg3: 140146949435392, arg4: 34, arg5: 4294967295) = 0
     2.084: mprotect(start: 208741634048, len: 16384, prot: 1                     ) = 0
     2.098: mprotect(start: 208735956992, len: 4096, prot: 1                      ) = 0
     2.122: munmap(addr: 140146949447680, len: 91882                              ) = 0
     2.359: brk(brk: 0                                                            ) = 28987392
     2.371: brk(brk: 29122560                                                     ) = 29122560
     2.490: nanosleep(rqtp: 140735694241504, rmtp: 0                              ) = 0
     2.507: exit_group(error_code: 0
[root@sandy linux]#

For now the timestamp and duration are always on, will be selectable.

Also if multiple threads are being monitored, its tid will appear.

The ret output continues to be interpreted a la strace.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ly9ulroru4my5isn0xe9gr0m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf test: Align the 'Ok'/'FAILED!' test results

And also print 'FAILED!' in red.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-rkisq85w24il3e2yl3nzumhu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Give user better message if precise is not supported

Platforms (e.g., VM's) without support for precise mode get a confusing
error message. e.g.,
$ perf record -e cycles:p -a -- sleep 1

  Error: sys_perf_event_open() syscall returned with 95 (Operation not
  supported).  /bin/dmesg may provide additional information.

  No hardware sampling interrupt available. No APIC? If so then you can
  boot the kernel with the "lapic" boot parameter to force-enable it.
  sleep: Terminated

which is not clear that precise mode might be the root problem. With this
patch:

$ perf record -e cycles:p -fo /tmp/perf.data -- sleep 1
  Error:
  'precise' request may not be supported. Try removing 'p' modifier
  sleep: Terminated

v2: softened message to 'may not be' supported per Robert's suggestion

Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Link: http://lkml.kernel.org/r/1347569955-54626-4-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Account the nr_entries in rblist properly

The nr_entries in rblist is never decremented when an element
is deleted. Also, use rblist__remove_node to delete a node in
rblist__delete(). This would keep the nr_entries sane.

Signed-off-by: Suzuki K. Poulose <suzuki@in.ibm.com>
Acked-by: David S. Ahern <dsahern@gmail.com>
Cc: David S. Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/20120831070834.14806.87398.stgit@suzukikp.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Try to find cross-built objdump path

As we have architecture information of saved perf.data file, we can try
to find cross-built objdump path.

The triplets include support for Android (arm, x86 and mips
architectures).

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Originally-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1350344020-8071-5-git-send-email-irina.tirdea@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Remove noise in python version feature test

Now that the feature tests honours the V=1 make verbosity switch, add a
return to the main() routine in the python version test, to avoid this
distraction:

CHK python version
<stdin>: In function 'main':
<stdin>:5: warning: control reaches end of non-void function

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-999no5yxlc2oqo9xjeez5zmv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Diplays more output on features check for make V=1

Adding more verbose output for compile time features checking, to ease
up debuging of feature detection failures.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/n/tip-fbjha6xs5soyaiek8j4142xg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

x86: Allow tracing of functions in arch/x86/kernel/rtc.c

Move native_read_tsc() to tsc.c to allow profiling to be
re-enabled for rtc.c.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1349698050-6560-1-git-send-email-david.vrabel@citrix.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf test: Add automated tests for pmu sysfs translated events

Add automated tests for all events found under PMU/events
directory. Tested events are in the 'cpu/event=xxx/u' format,
where 'xxx' is substituted by every event found.

The 'event=xxx' term is translated to the cpu specific term.
We only check that the event is created (not the real config
numbers) and that the modifier is properly set.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1349873598-12583-9-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf tools: Add support to specify hw event as PMU event term

Add a way to specify hw event as PMU event term like:

 'cpu/event=cpu-cycles/u'
 'cpu/event=instructions,.../u'
 'cpu/cycles,.../u'

The 'event=cpu-cycles' term is replaced/translated by the hw events
term translation, which is exposed by sysfs 'events' group attribute.

Add parser bits, the rest is already handled by the PMU alias code.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1349873598-12583-8-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf tools: Fix PMU object alias initialization

The pmu_lookup should return pmus that do not expose the 'events'
group attribute in sysfs. Also it should fail when any other error
during 'events' lookup is hit (pmu_aliases fails).

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1349873598-12583-7-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86: Add hardware events translations for Intel P6 cpus

Add support for Intel P6 processors to display 'events' sysfs
directory (/sys/devices/cpu/events/) with hw event translations:

  # ls /sys/devices/cpu/events/
  branch-instructions
  branch-misses
  bus-cycles
  cache-misses
  cache-references
  cpu-cycles
  instructions
  ref-cycles
  stalled-cycles-backend
  stalled-cycles-frontend

Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1349873598-12583-6-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86: Add hardware events translations for AMD cpus

Add support for AMD processors to display 'events' sysfs
directory (/sys/devices/cpu/events/) with hw event translations:

  # ls  /sys/devices/cpu/events/
  branch-instructions
  branch-misses
  bus-cycles
  cache-misses
  cache-references
  cpu-cycles
  instructions
  ref-cycles
  stalled-cycles-backend
  stalled-cycles-frontend

Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1349873598-12583-5-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86: Add hardware events translations for Intel cpus

Add support for Intel processors to display 'events' sysfs
directory (/sys/devices/cpu/events/) with hw event translations:

  # ls  /sys/devices/cpu/events/
  branch-instructions
  branch-misses
  bus-cycles
  cache-misses
  cache-references
  cpu-cycles
  instructions
  ref-cycles
  stalled-cycles-backend
  stalled-cycles-frontend

Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1349873598-12583-4-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86: Filter out undefined events from sysfs events attribute

The sysfs events group attribute currently shows all hw events,
including also undefined ones.

This patch filters out all undefined events out of the sysfs events
group attribute, so they don't even show up.

Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1349873598-12583-3-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86: Make hardware event translations available in sysfs

Add support to display hardware events translations available
through the sysfs. Add 'events' group attribute under the sysfs
x86 PMU record with attribute/file for each hardware event.

This patch adds only backbone for PMUs to display config under
'events' directory. The specific PMU support itself will come
in next patches, however this is how the sysfs group will look
like:

  # ls  /sys/devices/cpu/events/
  branch-instructions
  branch-misses
  bus-cycles
  cache-misses
  cache-references
  cpu-cycles
  instructions
  ref-cycles
  stalled-cycles-backend
  stalled-cycles-frontend

The file - hw event ID mapping is:

  file                      hw event ID
  ---------------------------------------------------------------
  cpu-cycles                PERF_COUNT_HW_CPU_CYCLES
  instructions              PERF_COUNT_HW_INSTRUCTIONS
  cache-references          PERF_COUNT_HW_CACHE_REFERENCES
  cache-misses              PERF_COUNT_HW_CACHE_MISSES
  branch-instructions       PERF_COUNT_HW_BRANCH_INSTRUCTIONS
  branch-misses             PERF_COUNT_HW_BRANCH_MISSES
  bus-cycles                PERF_COUNT_HW_BUS_CYCLES
  stalled-cycles-frontend   PERF_COUNT_HW_STALLED_CYCLES_FRONTEND
  stalled-cycles-backend    PERF_COUNT_HW_STALLED_CYCLES_BACKEND
  ref-cycles                PERF_COUNT_HW_REF_CPU_CYCLES

Each file in the 'events' directory contains the term translation
for the symbolic hw event for the currently running cpu model.

  # cat /sys/devices/cpu/events/stalled-cycles-backend
  event=0xb1,umask=0x01,inv,cmask=0x01

Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1349873598-12583-2-git-send-email-jolsa@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'perf/urgent' into perf/core

Pick up v3.7-rc2 and fixes before applying more patches.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf, cpu hotplug: Use cached value of smp_processor_id()

The perf_cpu_notifier() macro invokes smp_processor_id()
multiple times. Optimize it by using a local variable.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: peterz@infradead.org
Cc: acme@ghostprotocols.net
Link: http://lkml.kernel.org/r/20121016075817.3572.76733.stgit@srivatsabhat.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf, cpu hotplug: Run CPU_STARTING notifiers with irqs disabled

The CPU_STARTING notifiers are supposed to be run with irqs
disabled. But the perf_cpu_notifier() macro invokes them without
doing that. Fix it.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: peterz@infradead.org
Cc: acme@ghostprotocols.net
Link: http://lkml.kernel.org/r/20121016075809.3572.47848.stgit@srivatsabhat.in.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

x86/perf: Fix virtualization sanity check

In check_hw_exists() we try to detect non-emulated MSR accesses
by writing an arbitrary value into one of the PMU registers
and check if it's value after a readout is still the same.
This algorithm silently assumes that the register does not contain
the magic value already, which is wrong in at least one situation.

Fix the algorithm to really do a read-modify-write cycle. This fixes
a warning under Xen under some circumstances on AMD family 10h CPUs.

The reasons in more details actually sound like a story from
Believe It or Not!:

First you need an AMD family 10h/12h CPU. These do not reset the
PERF_CTR registers on a reboot.
Now you boot bare metal Linux, which goes successfully through this
check, but leaves the magic value of 0xabcd in the register. You
don't use the performance counters, but do a reboot (warm reset).
Then you choose to boot Xen. The check will be triggered with a
recent Linux kernel as Dom0 again, trying to write 0xabcd into the
MSR. Xen silently drops the write (expected), but the subsequent read
will return the value in the register, which just happens to be the
expected magic value. Thus the test misleadingly succeeds, leaving
the kernel in the belief that the PMU is available. This will trigger
the following message:

[    0.020294] ------------[ cut here ]------------
[    0.020311] WARNING: at arch/x86/xen/enlighten.c:730 xen_apic_write+0x15/0x17()
[    0.020318] Hardware name: empty
[    0.020323] Modules linked in:
[    0.020334] Pid: 1, comm: swapper/0 Not tainted 3.3.8 #7
[    0.020340] Call Trace:
[    0.020354]  [<ffffffff81050379>] warn_slowpath_common+0x80/0x98
[    0.020369]  [<ffffffff810503a6>] warn_slowpath_null+0x15/0x17
[    0.020378]  [<ffffffff810034df>] xen_apic_write+0x15/0x17
[    0.020392]  [<ffffffff8101cb2b>] perf_events_lapic_init+0x2e/0x30
[    0.020410]  [<ffffffff81ee4dd0>] init_hw_perf_events+0x250/0x407
[    0.020419]  [<ffffffff81ee4b80>] ? check_bugs+0x2d/0x2d
[    0.020430]  [<ffffffff81002181>] do_one_initcall+0x7a/0x131
[    0.020444]  [<ffffffff81edbbf9>] kernel_init+0x91/0x15d
[    0.020456]  [<ffffffff817caaa4>] kernel_thread_helper+0x4/0x10
[    0.020471]  [<ffffffff817c347c>] ? retint_restore_args+0x5/0x6
[    0.020481]  [<ffffffff817caaa0>] ? gs_change+0x13/0x13
[    0.020500] ---[ end trace a7919e7f17c0a725 ]---

The new code will change every of the 16 low bits read from the
register and tries to write and read-back that modified number
from the MSR.

Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Link: http://lkml.kernel.org/r/1349797115-28346-2-git-send-email-andre.przywara@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

 * Validate syscall id before growing syscall table in 'trace', fixing potential
   excessive memory usage.

 * Validate perf_sample.raw_data, making 'trace' more robust, avoiding some
   potential SEGFAULTs when reading tracepoint fields.

 * Fix exclude_guest parse events 'perf test's, from Jiri Olsa.

 * Do not flush maps on COMM, that is sent by the kernel when a process is
   exec'ed, but also when a process changes its name. Since we were assuming
   a COMM always meant an EXEC, we were losing track of a process maps by
   flushing its maps. Fix from Luigi Semenzato.

 * A recent patch introduced a problem by not initializing what should be
   the first kind of pager to use, 'man', instead it was being left as zero
   which means no pager. This caused 'perf subcmd --help' to produce no output.
   Fix from Namhyung Kim.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'stable/for-linus-3.7-rc2-tag' of git://git./linux/kernel/git/konrad/xen

Pull xen bug-fixes from Konrad Rzeszutek Wilk:
 - Fix mysterious SIGSEGV or SIGKILL in applications due to corrupting
   of the %eip when returning from a signal handler.
 - Fix various ARM compile issues after the merge fallout.
 - Continue on making more of the Xen generic code usable by ARM
   platform.
 - Fix SR-IOV passthrough to mirror multifunction PCI devices.
 - Fix various compile warnings.
 - Remove hypercalls that don't exist anymore.

* tag 'stable/for-linus-3.7-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: dbgp: Fix warning when CONFIG_PCI is not enabled.
  xen: arm: comment on why 64-bit xen_pfn_t is safe even on 32 bit
  xen: balloon: use correct type for frame_list
  xen/x86: don't corrupt %eip when returning from a signal handler
  xen: arm: make p2m operations NOPs
  xen: balloon: don't include e820.h
  xen: grant: use xen_pfn_t type for frame_list.
  xen: events: pirq_check_eoi_map is X86 specific
  xen: XENMEM_translate_gpfn_list was remove ages ago and is unused.
  xen: sysfs: fix build warning.
  xen: sysfs: include err.h for PTR_ERR etc
  xen: xenbus: quirk uses x86 specific cpuid
  xen PV passthru: assign SR-IOV virtual functions to separate virtual slots
  xen/xenbus: Fix compile warning.
  xen/x86: remove duplicated include from enlighten.c

alpha: separate thread-synchronous flags

... and fix the race in updating unaligned control ones

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'kvm-3.7-2' of git://git./virt/kvm/kvm

Pull kvm fixes from Avi Kivity:
 "KVM updates for 3.7-rc2"

* tag 'kvm-3.7-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM guest: exit idleness when handling KVM_PV_REASON_PAGE_NOT_PRESENT
  KVM: apic: fix LDR calculation in x2apic mode
  KVM: MMU: fix release noslot pfn

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
 "Most of these are uprobes race fixes from Oleg, and their preparatory
  cleanups.  (It's larger than what I'd normally send for an -rc kernel,
  but they looked significant enough to not delay them.)

  There's also an oprofile fix and an uncore PMU fix."

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  perf/x86: Disable uncore on virtualized CPUs
  oprofile, x86: Fix wrapping bug in op_x86_get_ctrl()
  ring-buffer: Check for uninitialized cpu buffer before resizing
  uprobes: Fix the racy uprobe->flags manipulation
  uprobes: Fix prepare_uprobe() race with itself
  uprobes: Introduce prepare_uprobe()
  uprobes: Fix handle_swbp() vs unregister() + register() race
  uprobes: Do not delete uprobe if uprobe_unregister() fails
  uprobes: Don't return success if alloc_uprobe() fails
  uprobes/x86: Only rep+nop can be emulated correctly
  uprobes: Simplify is_swbp_at_addr(), remove stale comments
  uprobes: Kill set_orig_insn()->is_swbp_at_addr()
  uprobes: Introduce copy_opcode(), kill read_opcode()
  uprobes: Kill set_swbp()->is_swbp_at_addr()
  uprobes: Restrict valid_vma(false) to skip VM_SHARED vmas
  uprobes: Change valid_vma() to demand VM_MAYEXEC rather than VM_EXEC
  uprobes: Change write_opcode() to use FOLL_FORCE
  uprobes: Move clear_thread_flag(TIF_UPROBE) to uprobe_notify_resume()
  uprobes: Kill UTASK_BP_HIT state
  uprobes: Fix UPROBE_SKIP_SSTEP checks in handle_swbp()
  ...

Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull core kernel fixes from Ingo Molnar:
 "Two small fixes"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation: Reflect the new location of the NMI watchdog info
  nohz: Fix idle ticks in cpu summary line of /proc/stat

Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Martin Schwidefsky:
 "Among the usual minor bug fixes the more interesting patches are the
  perf counters for the latest machine, the missing select to enable
  transparent huge pages and a build fix for the UAPI rework."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390,uapi: do not use uapi/asm-generic/kvm_para.h
  s390/cache: fix data/instruction cache output
  s390: fix linker script for 31 bit builds
  s390/thp: select HAVE_ARCH_TRANSPARENT_HUGEPAGE
  s390/kdump: Use 64 bit mode for 0x10000 entry point
  perf_cpum_cf: Add support for counters available with IBM zEC12
  s390/css: stop stsch loop after cc 3
  s390/cio: use generic bitmap functions
  s390/chpid: make headers usable (again)

Merge branch 'stable' of git://git./linux/kernel/git/cmetcalf/linux-tile

Pull tile fixes from Chris Metcalf:
 "This fixes one issue with compiler flags that can cause modules not to
  load, and cleans up some warnings with ELF_R_xxx defines."

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: avoid build warnings from duplicate ELF_R_xxx #defines
  arch/tile: avoid generating .eh_frame information in modules

Merge tag 'please-pull-uapi-fix' of git://git./linux/kernel/git/aegl/linux

Pull ia64 fix from Tony Luck:
 "Fix from dhowells for UAPI fallout"

* tag 'please-pull-uapi-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  UAPI: Make arch/ia64/include/asm/kvm_para.h generic