media: hdpvr: initialize dev->worker at hdpvr_register_videodev

[ Upstream commit 07922937e9a580825f9965c46fd15e23ba5754b6 ]

hdpvr_register_videodev is responsible to initialize a worker in
hdpvr_device. However, the worker is only initialized at
hdpvr_start_streaming other than hdpvr_register_videodev.
When hdpvr_probe does not initialize its worker, the hdpvr_disconnect
will encounter one WARN in flush_work.The stack trace is as follows:

 hdpvr_disconnect+0xb8/0xf2 drivers/media/usb/hdpvr/hdpvr-core.c:425
 usb_unbind_interface+0xbf/0x3a0 drivers/usb/core/driver.c:458
 __device_release_driver drivers/base/dd.c:1206 [inline]
 device_release_driver_internal+0x22a/0x230 drivers/base/dd.c:1237
 bus_remove_device+0x108/0x160 drivers/base/bus.c:529
 device_del+0x1fe/0x510 drivers/base/core.c:3592
 usb_disable_device+0xd1/0x1d0 drivers/usb/core/message.c:1419
 usb_disconnect+0x109/0x330 drivers/usb/core/hub.c:2228

Fix this by moving the initialization of dev->worker to the starting of
hdpvr_register_videodev

Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: sm712fb: Fix crash in smtcfb_write()

[ Upstream commit 4f01d09b2bbfbcb47b3eb305560a7f4857a32260 ]

When the sm712fb driver writes three bytes to the framebuffer, the
driver will crash:

    BUG: unable to handle page fault for address: ffffc90001ffffff
    RIP: 0010:smtcfb_write+0x454/0x5b0
    Call Trace:
     vfs_write+0x291/0xd60
     ? do_sys_openat2+0x27d/0x350
     ? __fget_light+0x54/0x340
     ksys_write+0xce/0x190
     do_syscall_64+0x43/0x90
     entry_SYSCALL_64_after_hwframe+0x44/0xae

Fix it by removing the open-coded endianness fixup-code.

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: mmp: Fix failure to remove sram device

[ Upstream commit 4036b29a146b2749af3bb213b003eb69f3e5ecc4 ]

Make sure in .probe() to set driver data before the function is left to
make it possible in .remove() to undo the actions done.

This fixes a potential memory leak and stops returning an error code in
.remove() that is ignored by the driver core anyhow.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: tegra: tamonten: Fix I2C3 pad setting

[ Upstream commit 0092c25b541a5422d7e71892a13c55ee91abc34b ]

This patch fixes the tristate configuration for i2c3 function assigned
to the dtf pins on the Tamonten Tegra20 SoM.

Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cx88-mpeg: clear interrupt status register before streaming video

[ Upstream commit 56cb61f70e547e1b0cdfe6ff5a1f1ce6242e6d96 ]

Some cx88 video cards may have transport stream status interrupts set
to 1 from cold start, causing errors like this:

  cx88xx: cx88_print_irqbits: core:irq mpeg  [0x100000] ts_err?*
  cx8802: cx8802_mpeg_irq: mpeg:general errors: 0x00100000

According to CX2388x datasheet, the interrupt status register should be
cleared before enabling IRQs to stream video.

Fix it by clearing the Transport Stream Interrupt Status register.

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: soc-core: skip zero num_dai component in searching dai name

[ Upstream commit f7d344a2bd5ec81fbd1ce76928fd059e57ec9bea ]

In the case like dmaengine which's not a dai but as a component, the
num_dai is zero, dmaengine component has the same component_of_node
as cpu dai, when cpu dai component is not ready, but dmaengine component
is ready, try to get cpu dai name, the snd_soc_get_dai_name() return
-EINVAL, not -EPROBE_DEFER, that cause below error:

asoc-simple-card <card name>: parse error -22
asoc-simple-card: probe of <card name> failed with error -22

The sound card failed to probe.

So this patch fixes the issue above by skipping the zero num_dai
component in searching dai name.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1644491952-7457-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: omapfb: panel-tpo-td043mtea1: Use sysfs_emit() instead of snprintf()

[ Upstream commit c07a039cbb96748f54c02995bae8131cc9a73b0a ]

Use sysfs_emit instead of scnprintf, snprintf or sprintf.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jing Yao <yao.jing2@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: omapfb: panel-dsi-cm: Use sysfs_emit() instead of snprintf()

[ Upstream commit f63658a59c3d439c8ad7b290f8ec270980e0f384 ]

Use sysfs_emit instead of scnprintf, snprintf or sprintf.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jing Yao <yao.jing2@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: bcm2837: Add the missing L1/L2 cache information

[ Upstream commit bdf8762da268d2a34abf517c36528413906e9cd5 ]

This patch fixes the kernel warning
"cacheinfo: Unable to detect cache hierarchy for CPU 0"
for the bcm2837 on newer kernel versions.

Signed-off-by: Richard Schleich <rs@noreya.tech>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
[florian: Align and remove comments matching property values]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: fix gic_irq_domain_translate warnings for msm8960

[ Upstream commit 6f7e221e7a5cfc3299616543fce42b36e631497b ]

IRQ types blindly copied from very similar APQ8064.

Fixes warnings as:
WARNING: CPU: 0 PID: 1 at drivers/irqchip/irq-gic.c:1080 gic_irq_domain_translate+0x118/0x120
...

Tested-by: LogicalErzor <logicalerzor@gmail.com> # boot-tested on Samsung S3
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220108174229.60384-1-david@ixit.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: omapfb: acx565akm: replace snprintf with sysfs_emit

[ Upstream commit 24565bc4115961db7ee64fcc7ad2a7437c0d0a49 ]

coccinelle report:
./drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c:
479:9-17: WARNING: use scnprintf or sprintf

Use sysfs_emit instead of scnprintf or sprintf makes more sense.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Yang Guang <yang.guang5@zte.com.cn>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: cirrusfb: check pixclock to avoid divide by zero

[ Upstream commit 5c6f402bdcf9e7239c6bc7087eda71ac99b31379 ]

Do a sanity check on pixclock value to avoid divide by zero.

If the pixclock value is zero, the cirrusfb driver will round up
pixclock to get the derived frequency as close to maxclock as
possible.

Syzkaller reported a divide error in cirrusfb_check_pixclock.

divide error: 0000 [#1] SMP KASAN PTI
CPU: 0 PID: 14938 Comm: cirrusfb_test Not tainted 5.15.0-rc6 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2
RIP: 0010:cirrusfb_check_var+0x6f1/0x1260

Call Trace:
 fb_set_var+0x398/0xf90
 do_fb_ioctl+0x4b8/0x6f0
 fb_ioctl+0xeb/0x130
 __x64_sys_ioctl+0x19d/0x220
 do_syscall_64+0x3a/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: w100fb: Reset global state

[ Upstream commit 8738ddcac644964ae128ccd3d80d48773c8d528e ]

w100fb_probe() did not reset the global state to its initial state. This
can result in invocation of iounmap() even when there was not the
appropriate successful call of ioremap(). For instance, this may be the
case if first probe fails after two successful ioremap() while second
probe fails when first ioremap() fails. The similar issue is with
w100fb_remove(). The patch fixes both bugs.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: nvidiafb: Use strscpy() to prevent buffer overflow

[ Upstream commit 37a1a2e6eeeb101285cd34e12e48a881524701aa ]

Coverity complains of a possible buffer overflow. However,
given the 'static' scope of nvidia_setup_i2c_bus() it looks
like that can't happen after examiniing the call sites.

CID 19036 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW)
1. fixed_size_dest: You might overrun the 48-character fixed-size string
  chan->adapter.name by copying name without checking the length.
2. parameter_as_source: Note: This defect has an elevated risk because the
  source argument is a parameter of the current function.
 89        strcpy(chan->adapter.name, name);

Fix this warning by using strscpy() which will silence the warning and
prevent any future buffer overflows should the names used to identify the
channel become much longer.

Cc: Antonino Daplas <adaplas@gmail.com>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ntfs: add sanity check on allocation size

[ Upstream commit 714fbf2647b1a33d914edd695d4da92029c7e7c0 ]

ntfs_read_inode_mount invokes ntfs_malloc_nofs with zero allocation
size.  It triggers one BUG in the __ntfs_malloc function.

Fix this by adding sanity check on ni->attr_list_size.

Link: https://lkml.kernel.org/r/20220120094914.47736-1-dzm91@hust.edu.cn
Reported-by: syzbot+3c765c5248797356edaa@syzkaller.appspotmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Acked-by: Anton Altaparmakov <anton@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: don't BUG if someone dirty pages without asking ext4 first

[ Upstream commit cc5095747edfb054ca2068d01af20be3fcc3634f ]

[un]pin_user_pages_remote is dirtying pages without properly warning
the file system in advance.  A related race was noted by Jan Kara in
2018[1]; however, more recently instead of it being a very hard-to-hit
race, it could be reliably triggered by process_vm_writev(2) which was
discovered by Syzbot[2].

This is technically a bug in mm/gup.c, but arguably ext4 is fragile in
that if some other kernel subsystem dirty pages without properly
notifying the file system using page_mkwrite(), ext4 will BUG, while
other file systems will not BUG (although data will still be lost).

So instead of crashing with a BUG, issue a warning (since there may be
potential data loss) and just mark the page as clean to avoid
unprivileged denial of service attacks until the problem can be
properly fixed.  More discussion and background can be found in the
thread starting at [2].

[1] https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz
[2] https://lore.kernel.org/r/Yg0m6IjcNmfaSokM@google.com

Reported-by: syzbot+d59332e2db681cf18f0318a06e994ebbb529a8db@syzkaller.appspotmail.com
Reported-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/YiDS9wVfq4mM2jGK@mit.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: tegra20: Use of_device_get_match_data()

[ Upstream commit c9839acfcbe20ce43d363c2a9d0772472d9921c0 ]

Use of_device_get_match_data() to simplify the code.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220315023138.2118293-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM: core: keep irq flags in device_pm_check_callbacks()

[ Upstream commit 524bb1da785a7ae43dd413cd392b5071c6c367f8 ]

The function device_pm_check_callbacks() can be called under the spin
lock (in the reported case it happens from genpd_add_device() ->
dev_pm_domain_set(), when the genpd uses spinlocks rather than mutexes.

However this function uncoditionally uses spin_lock_irq() /
spin_unlock_irq(), thus not preserving the CPU flags. Use the
irqsave/irqrestore instead.

The backtrace for the reference:
[    2.752010] ------------[ cut here ]------------
[    2.756769] raw_local_irq_restore() called with IRQs enabled
[    2.762596] WARNING: CPU: 4 PID: 1 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x34/0x50
[    2.772338] Modules linked in:
[    2.775487] CPU: 4 PID: 1 Comm: swapper/0 Tainted: G S                5.17.0-rc6-00384-ge330d0d82eff-dirty #684
[    2.781384] Freeing initrd memory: 46024K
[    2.785839] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    2.785841] pc : warn_bogus_irq_restore+0x34/0x50
[    2.785844] lr : warn_bogus_irq_restore+0x34/0x50
[    2.785846] sp : ffff80000805b7d0
[    2.785847] x29: ffff80000805b7d0 x28: 0000000000000000 x27: 0000000000000002
[    2.785850] x26: ffffd40e80930b18 x25: ffff7ee2329192b8 x24: ffff7edfc9f60800
[    2.785853] x23: ffffd40e80930b18 x22: ffffd40e80930d30 x21: ffff7edfc0dffa00
[    2.785856] x20: ffff7edfc09e3768 x19: 0000000000000000 x18: ffffffffffffffff
[    2.845775] x17: 6572206f74206465 x16: 6c696166203a3030 x15: ffff80008805b4f7
[    2.853108] x14: 0000000000000000 x13: ffffd40e809550b0 x12: 00000000000003d8
[    2.860441] x11: 0000000000000148 x10: ffffd40e809550b0 x9 : ffffd40e809550b0
[    2.867774] x8 : 00000000ffffefff x7 : ffffd40e809ad0b0 x6 : ffffd40e809ad0b0
[    2.875107] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000
[    2.882440] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff7edfc03a8000
[    2.889774] Call trace:
[    2.892290]  warn_bogus_irq_restore+0x34/0x50
[    2.896770]  _raw_spin_unlock_irqrestore+0x94/0xa0
[    2.901690]  genpd_unlock_spin+0x20/0x30
[    2.905724]  genpd_add_device+0x100/0x2d0
[    2.909850]  __genpd_dev_pm_attach+0xa8/0x23c
[    2.914329]  genpd_dev_pm_attach_by_id+0xc4/0x190
[    2.919167]  genpd_dev_pm_attach_by_name+0x3c/0xd0
[    2.924086]  dev_pm_domain_attach_by_name+0x24/0x30
[    2.929102]  psci_dt_attach_cpu+0x24/0x90
[    2.933230]  psci_cpuidle_probe+0x2d4/0x46c
[    2.937534]  platform_probe+0x68/0xe0
[    2.941304]  really_probe.part.0+0x9c/0x2fc
[    2.945605]  __driver_probe_device+0x98/0x144
[    2.950085]  driver_probe_device+0x44/0x15c
[    2.954385]  __device_attach_driver+0xb8/0x120
[    2.958950]  bus_for_each_drv+0x78/0xd0
[    2.962896]  __device_attach+0xd8/0x180
[    2.966843]  device_initial_probe+0x14/0x20
[    2.971144]  bus_probe_device+0x9c/0xa4
[    2.975092]  device_add+0x380/0x88c
[    2.978679]  platform_device_add+0x114/0x234
[    2.983067]  platform_device_register_full+0x100/0x190
[    2.988344]  psci_idle_init+0x6c/0xb0
[    2.992113]  do_one_initcall+0x74/0x3a0
[    2.996060]  kernel_init_freeable+0x2fc/0x384
[    3.000543]  kernel_init+0x28/0x130
[    3.004132]  ret_from_fork+0x10/0x20
[    3.007817] irq event stamp: 319826
[    3.011404] hardirqs last  enabled at (319825): [<ffffd40e7eda0268>] __up_console_sem+0x78/0x84
[    3.020332] hardirqs last disabled at (319826): [<ffffd40e7fd6d9d8>] el1_dbg+0x24/0x8c
[    3.028458] softirqs last  enabled at (318312): [<ffffd40e7ec90410>] _stext+0x410/0x588
[    3.036678] softirqs last disabled at (318299): [<ffffd40e7ed1bf68>] __irq_exit_rcu+0x158/0x174
[    3.045607] ---[ end trace 0000000000000000 ]---

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI/APEI: Limit printable size of BERT table data

[ Upstream commit 3f8dec116210ca649163574ed5f8df1e3b837d07 ]

Platforms with large BERT table data can trigger soft lockup errors
while attempting to print the entire BERT table data to the console at
boot:

  watchdog: BUG: soft lockup - CPU#160 stuck for 23s! [swapper/0:1]

Observed on Ampere Altra systems with a single BERT record of ~250KB.

The original bert driver appears to have assumed relatively small table
data. Since it is impractical to reassemble large table data from
interwoven console messages, and the table data is available in

  /sys/firmware/acpi/tables/data/BERT

limit the size for tables printed to the console to 1024 (for no reason
other than it seemed like a good place to kick off the discussion, would
appreciate feedback from existing users in terms of what size would
maintain their current usage model).

Alternatively, we could make printing a CONFIG option, use the
bert_disable boot arg (or something similar), or use a debug log level.
However, all those solutions require extra steps or change the existing
behavior for small table data. Limiting the size preserves existing
behavior on existing platforms with small table data, and eliminates the
soft lockups for platforms with large table data, while still making it
available.

Signed-off-by: Darren Hart <darren@os.amperecomputing.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPICA: Avoid walking the ACPI Namespace if it is not there

[ Upstream commit 0c9992315e738e7d6e927ef36839a466b080dba6 ]

ACPICA commit b1c3656ef4950098e530be68d4b589584f06cddc

Prevent acpi_ns_walk_namespace() from crashing when called with
start_node equal to ACPI_ROOT_OBJECT if the Namespace has not been
instantiated yet and acpi_gbl_root_node is NULL.

For instance, this can happen if the kernel is run with "acpi=off"
in the command line.

Link: https://github.com/acpica/acpica/commit/b1c3656ef4950098e530be68d4b589584f06cddc
Link: https://lore.kernel.org/linux-acpi/CAJZ5v0hJWW_vZ3wwajE7xT38aWjY7cZyvqMJpXHzUL98-SiCVQ@mail.gmail.com/
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/nvic: Release nvic_base upon failure

[ Upstream commit e414c25e3399b2b3d7337dc47abccab5c71b7c8f ]

smatch warning was reported as below ->

smatch warnings:
drivers/irqchip/irq-nvic.c:131 nvic_of_init()
warn: 'nvic_base' not released on lines: 97.

Release nvic_base upon failure.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220218163303.33344-1-jrdr.linux@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Fix incorrect type in assignment of ipv6 port for audit

[ Upstream commit a5cd1ab7ab679d252a6d2f483eee7d45ebf2040c ]

Remove inappropriate use of ntohs() and assign the
port value directly.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

loop: use sysfs_emit() in the sysfs xxx show()

[ Upstream commit b27824d31f09ea7b4a6ba2c1b18bd328df3e8bed ]

sprintf does not know the PAGE_SIZE maximum of the temporary buffer
used for outputting sysfs content and it's possible to overrun the
PAGE_SIZE buffer length.

Use a generic sysfs_emit function that knows the size of the
temporary buffer and ensures that no overrun is done for offset
attribute in
loop_attr_[offset|sizelimit|autoclear|partscan|dio]_show() callbacks.

Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20220215213310.7264-2-kch@nvidia.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selinux: use correct type for context length

[ Upstream commit b97df7c098c531010e445da88d02b7bf7bf59ef6 ]

security_sid_to_context() expects a pointer to an u32 as the address
where to store the length of the computed context.

Reported by sparse:

    security/selinux/xfrm.c:359:39: warning: incorrect type in arg 4
                                    (different signedness)
    security/selinux/xfrm.c:359:39:    expected unsigned int
                                       [usertype] *scontext_len
    security/selinux/xfrm.c:359:39:    got int *

Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
[PM: wrapped commit description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/test: use after free in register_test_dev_kmod()

[ Upstream commit dc0ce6cc4b133f5f2beb8b47dacae13a7d283c2c ]

The "test_dev" pointer is freed but then returned to the caller.

Fixes: d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4/pNFS: Fix another issue with a list iterator pointing to the head

[ Upstream commit 7c9d845f0612e5bcd23456a2ec43be8ac43458f1 ]

In nfs4_callback_devicenotify(), if we don't find a matching entry for
the deviceid, we're left with a pointer to 'struct nfs_server' that
actually points to the list of super blocks associated with our struct
nfs_client.
Furthermore, even if we have a valid pointer, nothing pins the super
block, and so the struct nfs_server could end up getting freed while
we're using it.

Since all we want is a pointer to the struct pnfs_layoutdriver_type,
let's skip all the iteration over super blocks, and just use APIs to
find the layout driver directly.

Reported-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Fixes: 1be5683b03a7 ("pnfs: CB_NOTIFY_DEVICEID")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/x25: Fix null-ptr-deref caused by x25_disconnect

[ Upstream commit 7781607938c8371d4c2b243527430241c62e39c2 ]

When the link layer is terminating, x25->neighbour will be set to NULL
in x25_disconnect(). As a result, it could cause null-ptr-deref bugs in
x25_sendmsg(),x25_recvmsg() and x25_connect(). One of the bugs is
shown below.

    (Thread 1)                 |  (Thread 2)
x25_link_terminated()          | x25_recvmsg()
 x25_kill_by_neigh()           |  ...
  x25_disconnect()             |  lock_sock(sk)
   ...                         |  ...
   x25->neighbour = NULL //(1) |
   ...                         |  x25->neighbour->extended //(2)

The code sets NULL to x25->neighbour in position (1) and dereferences
x25->neighbour in position (2), which could cause null-ptr-deref bug.

This patch adds lock_sock() in x25_kill_by_neigh() in order to synchronize
with x25_sendmsg(), x25_recvmsg() and x25_connect(). What`s more, the
sock held by lock_sock() is not NULL, because it is extracted from x25_list
and uses x25_list_lock to synchronize.

Fixes: 4becb7ee5b3d ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qlcnic: dcb: default to returning -EOPNOTSUPP

[ Upstream commit 1521db37f0d42334a88e8ff28198a27d1ed5cd7b ]

Clang static analysis reports this issue
qlcnic_dcb.c:382:10: warning: Assigned value is
  garbage or undefined
  mbx_out = *val;
          ^ ~~~~

val is set in the qlcnic_dcb_query_hw_capability() wrapper.
If there is no query_hw_capability op in dcp, success is
returned without setting the val.

For this and similar wrappers, return -EOPNOTSUPP.

Fixes: 14d385b99059 ("qlcnic: dcb: Query adapter DCB capabilities.")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: phy: broadcom: Fix brcm_fet_config_init()

[ Upstream commit bf8bfc4336f7a34e48b3bbd19b1542bf085bdc3d ]

A Broadcom AC201 PHY (same entry as 5241) would be flagged by the
Broadcom UniMAC MDIO controller as not completing the turn around
properly since the PHY expects 65 MDC clock cycles to complete a write
cycle, and the MDIO controller was only sending 64 MDC clock cycles as
determined by looking at a scope shot.

This would make the subsequent read fail with the UniMAC MDIO controller
command field having MDIO_READ_FAIL set and we would abort the
brcm_fet_config_init() function and thus not probe the PHY at all.

After issuing a software reset, wait for at least 1ms which is well
above the 1us reset delay advertised by the datasheet and issue a dummy
read to let the PHY turn around the line properly. This read
specifically ignores -EIO which would be returned by MDIO controllers
checking for the line being turned around.

If we have a genuine reaad failure, the next read of the interrupt
status register would pick it up anyway.

Fixes: d7a2ed9248a3 ("broadcom: Add AC131 phy support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220324232438.1156812-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen: fix is_xen_pmu()

[ Upstream commit de2ae403b4c0e79a3410e63bc448542fbb9f9bfc ]

is_xen_pmu() is taking the cpu number as parameter, but it is not using
it. Instead it just tests whether the Xen PMU initialization on the
current cpu did succeed. As this test is done by checking a percpu
pointer, preemption needs to be disabled in order to avoid switching
the cpu while doing the test. While resuming from suspend() this seems
not to be the case:

[   88.082751] ACPI: PM: Low-level resume complete
[   88.087933] ACPI: EC: EC started
[   88.091464] ACPI: PM: Restoring platform NVS memory
[   88.097166] xen_acpi_processor: Uploading Xen processor PM info
[   88.103850] Enabling non-boot CPUs ...
[   88.108128] installing Xen timer for CPU 1
[   88.112763] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-sleep/7138
[   88.122256] caller is is_xen_pmu+0x12/0x30
[   88.126937] CPU: 0 PID: 7138 Comm: systemd-sleep Tainted: G        W         5.16.13-2.fc32.qubes.x86_64 #1
[   88.137939] Hardware name: Star Labs StarBook/StarBook, BIOS 7.97 03/21/2022
[   88.145930] Call Trace:
[   88.148757]  <TASK>
[   88.151193]  dump_stack_lvl+0x48/0x5e
[   88.155381]  check_preemption_disabled+0xde/0xe0
[   88.160641]  is_xen_pmu+0x12/0x30
[   88.164441]  xen_smp_intr_init_pv+0x75/0x100

Fix that by replacing is_xen_pmu() by a simple boolean variable which
reflects the Xen PMU initialization state on cpu 0.

Modify xen_pmu_init() to return early in case it is being called for a
cpu other than cpu 0 and the boolean variable not being set.

Fixes: bf6dfb154d93 ("xen/PMU: PMU emulation code")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220325142002.31789-1-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_conntrack_tcp: preserve liberal flag in tcp options

[ Upstream commit f2dd495a8d589371289981d5ed33e6873df94ecc ]

Do not reset IP_CT_TCP_FLAG_BE_LIBERAL flag in out-of-sync scenarios
coming before the TCP window tracking, otherwise such connections will
fail in the window check.

Update tcp_options() to leave this flag in place and add a new helper
function to reset the tcp window state.

Based on patch from Sven Auhagen.

Fixes: c4832c7bbc3f ("netfilter: nf_ct_tcp: improve out-of-sync situation in TCP tracking")
Tested-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jfs: fix divide error in dbNextAG

[ Upstream commit 2cc7cc01c15f57d056318c33705647f87dcd4aab ]

Syzbot reported divide error in dbNextAG(). The problem was in missing
validation check for malicious image.

Syzbot crafted an image with bmp->db_numag equal to 0. There wasn't any
validation checks, but dbNextAG() blindly use bmp->db_numag in divide
expression

Fix it by validating bmp->db_numag in dbMount() and return an error if
image is malicious

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-and-tested-by: syzbot+46f5c25af73eb8330eb6@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kgdbts: fix return value of __setup handler

[ Upstream commit 96c9e802c64014a7716865332d732cc9c7f24593 ]

__setup() handlers should return 1 to indicate that the boot option
has been handled. A return of 0 causes the boot option/value to be
listed as an Unknown kernel parameter and added to init's (limited)
environment strings. So return 1 from kgdbts_option_setup().

Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7
  kgdboc=kbd kgdbts=", will be passed to user space.

 Run /sbin/init as init process
   with arguments:
     /sbin/init
   with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc7
     kgdboc=kbd
     kgdbts=

Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Fixes: e8d31c204e36 ("kgdb: add kgdb internal test suite")
Cc: kgdb-bugreport@lists.sourceforge.net
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220308033255.22118-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kgdboc: fix return value of __setup handler

[ Upstream commit ab818c7aa7544bf8d2dd4bdf68878b17a02eb332 ]

__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) environment strings.
So return 1 from kgdboc_option_setup().

Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc7
  kgdboc=kbd kgdbts=", will be passed to user space.

 Run /sbin/init as init process
   with arguments:
     /sbin/init
   with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc7
     kgdboc=kbd
     kgdbts=

Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Fixes: 1bd54d851f50 ("kgdboc: Passing ekgdboc to command line causes panic")
Fixes: f2d937f3bf00 ("consoles: polling support, kgdboc")
Cc: He Zhe <zhe.he@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: kgdb-bugreport@lists.sourceforge.net
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: linux-serial@vger.kernel.org
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220309033018.17936-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: hvc: fix return value of __setup handler

[ Upstream commit 53819a0d97aace1425bb042829e3446952a9e8a9 ]

__setup() handlers should return 1 to indicate that the boot option
has been handled or 0 to indicate that it was not handled.
Add a pr_warn() message if the option value is invalid and then
always return 1.

Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Fixes: 86b40567b917 ("tty: replace strict_strtoul() with kstrtoul()")
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Julian Wiedmann <jwi@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220308024228.20477-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl/rockchip: Add missing of_node_put() in rockchip_pinctrl_probe

[ Upstream commit 89388f8730699c259f8090ec435fb43569efe4ac ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

Fixes: 1e747e59cc4d ("pinctrl: rockchip: base regmap supplied by a syscon")
Fixes: 14dee8677e19 ("pinctrl: rockchip: let pmu registers be supplied by a syscon")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307120234.28657-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: nomadik: Add missing of_node_put() in nmk_pinctrl_probe

[ Upstream commit c09ac191b1f97cfa06f394dbfd7a5db07986cefc ]

This node pointer is returned by of_parse_phandle() with refcount
incremented in this function. Calling of_node_put() to avoid
the refcount leak.

Fixes: 32e67eee670e ("pinctrl: nomadik: Allow prcm_base to be extracted from Device Tree")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307115116.25316-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: mediatek: Fix missing of_node_put() in mtk_pctrl_init

[ Upstream commit dab4df9ca919f59e5b9dd84385eaf34d4f20dbb0 ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

Fixes: a6df410d420a ("pinctrl: mediatek: Add Pinctrl/GPIO driver for mt8135.")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220308071155.21114-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFS: remove unneeded check in decode_devicenotify_args()

[ Upstream commit cb8fac6d2727f79f211e745b16c9abbf4d8be652 ]

[You don't often get email from khoroshilov@ispras.ru. Learn why this is important at http://aka.ms/LearnAboutSenderIdentification.]

Overflow check in not needed anymore after we switch to kmalloc_array().

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: a4f743a6bb20 ("NFSv4.1: Convert open-coded array allocation calls to kmalloc_array()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver

[ Upstream commit 6d6ef58c2470da85a99119f74d34216c8074b9f0 ]

The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the error handling path.

Fixes: 2db04f16b589 ("clk: tegra: Add EMC clock driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20220112104501.30655-1-linmq006@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: clps711x: Terminate clk_div_table with sentinel element

[ Upstream commit 8bed4ed5aa3431085d9d27afc35d684856460eda ]

In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).

Fixes: 631c53478973d ("clk: Add CLPS711X clk driver")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220218000922.134857-5-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: loongson1: Terminate clk_div_table with sentinel element

[ Upstream commit 3eb00f89162e80083dfcaa842468b510462cfeaa ]

In order that the end of a clk_div_table can be detected, it must be
terminated with a sentinel element (.div = 0).

Fixes: b4626a7f4892 ("CLK: Add Loongson1C clock support")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Link: https://lore.kernel.org/r/20220218000922.134857-3-j.neuschaefer@gmx.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

remoteproc: qcom_wcnss: Add missing of_node_put() in wcnss_alloc_memory_region

[ Upstream commit 8f90161a66bc3d6b9fe8dde4d9028d20eae1b62a ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

Fixes: aed361adca9f ("remoteproc: qcom: Introduce WCNSS peripheral image loader")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220308063102.10049-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: clk-rcg2: Update the frac table for pixel clock

[ Upstream commit b527358cb4cd58a8279c9062b0786f1fab628fdc ]

Support the new numerator and denominator for pixel clock on SM8350 and
support rgb101010, RGB888 use cases on SM8450.

Fixes: 99cbd064b059f ("clk: qcom: Support display RCG clocks")
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220227175536.3131-2-tdas@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adc: Add check for devm_request_threaded_irq

[ Upstream commit b30537a4cedcacf0ade2f33ebb7610178ed1e7d7 ]

As the potential failure of the devm_request_threaded_irq(),
it should be better to check the return value and return
error if fails.

Fixes: fa659a40b80b ("iio: adc: twl6030-gpadc: Use devm_* API family")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220224062849.3280966-1-jiasheng@iscas.ac.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250: Fix race condition in RTS-after-send handling

[ Upstream commit dedab69fd650ea74710b2e626e63fd35584ef773 ]

Set em485->active_timer = NULL isn't always enough to take out the stop
timer. While there is a check that it acts in the right state (i.e.
waiting for RTS-after-send to pass after sending some chars) but the
following might happen:

 - CPU1: some chars send, shifter becomes empty, stop tx timer armed
 - CPU0: more chars send before RTS-after-send expired
 - CPU0: shifter empty irq, port lock taken
 - CPU1: tx timer triggers, waits for port lock
 - CPU0: em485->active_timer = &em485->stop_tx_timer, hrtimer_start(),
   releases lock()
 - CPU1: get lock, see em485->active_timer == &em485->stop_tx_timer,
   tear down RTS too early

This fix bases on research done by Steffen Trumtrar.

Fixes: b86f86e8e7c5 ("serial: 8250: fix potential deadlock in rs485-mode")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220215160236.344236-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250_mid: Balance reference count for PCI DMA device

[ Upstream commit 67ec6dd0b257bd81b4e9fcac89b29da72f6265e5 ]

The pci_get_slot() increases its reference count, the caller
must decrement the reference count by calling pci_dev_put().

Fixes: 90b9aacf912a ("serial: 8250_pci: add Intel Tangier support")
Fixes: f549e94effa1 ("serial: 8250_pci: add Intel Penwell ports")
Reported-by: Qing Wang <wangqing@vivo.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Depends-on: d9eda9bab237 ("serial: 8250_pci: Intel MID UART support to its own driver")
Link: https://lore.kernel.org/r/20220215100920.41984-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging:iio:adc:ad7280a: Fix handing of device address bit reversing.

[ Upstream commit f281e4ddbbc0b60f061bc18a2834e9363ba85f9f ]

The bit reversal was wrong for bits 1 and 3 of the 5 bits.
Result is driver failure to probe if you have more than 2 daisy-chained
devices.  Discovered via QEMU based device emulation.

Fixes tag is for when this moved from a macro to a function, but it
was broken before that.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes: 065a7c0b1fec ("Staging: iio: adc: ad7280a.c: Fixed Macro argument reuse")
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://lore.kernel.org/r/20220206190328.333093-2-jic23@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: lpc18xx-sct: Initialize driver data and hardware before pwmchip_add()

[ Upstream commit 0401f24cd238ae200a23a13925f98de3d2c883b8 ]

When a driver calls pwmchip_add() it has to be prepared to immediately
get its callbacks called. So move allocation of driver data and hardware
initialization before the call to pwmchip_add().

This fixes a potential NULL pointer exception and a race condition on
register writes.

Fixes: 841e6f90bb78 ("pwm: NXP LPC18xx PWM/SCT driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mxser: fix xmit_buf leak in activate when LSR == 0xff

[ Upstream commit cd3a4907ee334b40d7aa880c7ab310b154fd5cd4 ]

When LSR is 0xff in ->activate() (rather unlike), we return an error.
Provided ->shutdown() is not called when ->activate() fails, nothing
actually frees the buffer in this case.

Fix this by properly freeing the buffer in a designated label. We jump
there also from the "!info->type" if now too.

Fixes: 6769140d3047 ("tty: mxser: use the tty_port_open method")
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220124071430.14907-6-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: asic3: Add missing iounmap() on error asic3_mfd_probe

[ Upstream commit e84ee1a75f944a0fe3c277aaa10c426603d2b0bc ]

Add the missing iounmap() before return from asic3_mfd_probe
in the error handling case.

Fixes: 64e8867ba809 ("mfd: tmio_mmc hardware abstraction for CNF area")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220307072947.5369-1-linmq006@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: ensure PMTU updates are processed during fastopen

[ Upstream commit ed0c99dc0f499ff8b6e75b5ae6092ab42be1ad39 ]

tp->rx_opt.mss_clamp is not populated, yet, during TFO send so we
rise it to the local MSS. tp->mss_cache is not updated, however:

tcp_v6_connect():
  tp->rx_opt.mss_clamp = IPV6_MIN_MTU - headers;
  tcp_connect():
     tcp_connect_init():
       tp->mss_cache = min(mtu, tp->rx_opt.mss_clamp)
     tcp_send_syn_data():
       tp->rx_opt.mss_clamp = tp->advmss

After recent fixes to ICMPv6 PTB handling we started dropping
PMTU updates higher than tp->mss_cache. Because of the stale
tp->mss_cache value PMTU updates during TFO are always dropped.

Thanks to Wei for helping zero in on the problem and the fix!

Fixes: c7bb4b89033b ("ipv6: tcp: drop silly ICMPv6 packet too big messages")
Reported-by: Andre Nash <alnash@fb.com>
Reported-by: Neil Spring <ntspring@fb.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220321165957.1769954-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: mux: demux-pinctrl: do not deactivate a master that is not active

[ Upstream commit 1a22aabf20adf89cb216f566913196128766f25b ]

Attempting to rollback the activation of the current master when
the current master has not been activated is bad. priv->cur_chan
and priv->cur_adap are both still zeroed out and the rollback
may result in attempts to revert an of changeset that has not been
applied and do result in calls to both del and put the zeroed out
i2c_adapter. Maybe it crashes, or whatever, but it's bad in any
case.

Fixes: e9d1a0a41d44 ("i2c: mux: demux-pinctrl: Fix an error handling path in 'i2c_demux_pinctrl_probe()'")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

af_netlink: Fix shift out of bounds in group mask calculation

[ Upstream commit 0caf6d9922192dd1afa8dc2131abfb4df1443b9f ]

When a netlink message is received, netlink_recvmsg() fills in the address
of the sender. One of the fields is the 32-bit bitfield nl_groups, which
carries the multicast group on which the message was received. The least
significant bit corresponds to group 1, and therefore the highest group
that the field can represent is 32. Above that, the UB sanitizer flags the
out-of-bounds shift attempts.

Which bits end up being set in such case is implementation defined, but
it's either going to be a wrong non-zero value, or zero, which is at least
not misleading. Make the latter choice deterministic by always setting to 0
for higher-numbered multicast groups.

To get information about membership in groups >= 32, userspace is expected
to use nl_pktinfo control messages[0], which are enabled by NETLINK_PKTINFO
socket option.
[0] https://lwn.net/Articles/147608/

The way to trigger this issue is e.g. through monitoring the BRVLAN group:

# bridge monitor vlan &
# ip link add name br type bridge

Which produces the following citation:

UBSAN: shift-out-of-bounds in net/netlink/af_netlink.c:162:19
shift exponent 32 is too large for 32-bit type 'int'

Fixes: f7fa9b10edbb ("[NETLINK]: Support dynamic number of multicast groups per netlink family")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/2bef6aabf201d1fc16cca139a744700cff9dcb04.1647527635.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: storage: ums-realtek: fix error code in rts51x_read_mem()

[ Upstream commit b07cabb8361dc692522538205552b1b9dab134be ]

The rts51x_read_mem() function should return negative error codes.
Currently if the kmalloc() fails it returns USB_STOR_TRANSPORT_ERROR (3)
which is treated as success by the callers.

Fixes: 065e60964e29 ("ums_realtek: do not use stack memory for DMA")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220304073504.GA26464@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init

[ Upstream commit fecbd4a317c95d73c849648c406bcf1b6a0ec1cf ]

The reference counting issue happens in several error handling paths
on a refcounted object "nc->dmac". In these paths, the function simply
returns the error code, forgetting to balance the reference count of
"nc->dmac", increased earlier by dma_request_channel(), which may
cause refcount leaks.

Fix it by decrementing the refcount of specific object in those error
paths.

Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Co-developed-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Co-developed-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220304085330.3610-1-xiongx18@fudan.edu.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: RB532: fix return value of __setup handler

[ Upstream commit 8755d57ba1ff910666572fab9e32890e8cc6ed3b ]

__setup() handlers should return 1 to obsolete_checksetup() in
init/main.c to indicate that the boot option has been handled.
A return of 0 causes the boot option/value to be listed as an Unknown
kernel parameter and added to init's (limited) argument or environment
strings. Also, error return codes don't mean anything to
obsolete_checksetup() -- only non-zero (usually 1) or zero.
So return 1 from setup_kmac().

Fixes: 9e21c7e40b7e ("MIPS: RB532: Replace parse_mac_addr() with mac_pton().")
Fixes: 73b4390fb234 ("[MIPS] Routerboard 532: Support for base system")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
From: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Phil Sutter <n0-1@freewrt.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Daniel Walter <dwalter@google.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vxcan: enable local echo for sent CAN frames

[ Upstream commit 259bdba27e32368b4404f69d613b1c1014c07cbf ]

The vxcan driver provides a pair of virtual CAN interfaces to exchange
CAN traffic between different namespaces - analogue to veth.

In opposite to the vcan driver the local sent CAN traffic on this interface
is not echo'ed back but only sent to the remote peer. This is unusual and
can be easily fixed by removing IFF_ECHO from the netdevice flags that
are set for vxcan interfaces by default at startup.

Without IFF_ECHO set on driver level, the local sent CAN frames are echo'ed
in af_can.c in can_send(). This patch makes vxcan interfaces adopt the
same local echo behavior and procedures as known from the vcan interfaces.

Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)")
Link: https://lore.kernel.org/all/20220309120416.83514-5-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: mc13xxx: Add check for mc13xxx_irq_request

[ Upstream commit e477e51a41cb5d6034f3c5ea85a71ad4613996b9 ]

As the potential failure of the devm_request_threaded_irq(),
it should be better to check the return value of the
mc13xxx_irq_request() and return error if fails.

Fixes: 8e00593557c3 ("mfd: Add mc13892 support to mc13xxx")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220224022331.3208275-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/sysdev: fix incorrect use to determine if list is empty

[ Upstream commit fa1321b11bd01752f5be2415e74a0e1a7c378262 ]

'gtm' will *always* be set by list_for_each_entry().
It is incorrect to assume that the iterator value will be NULL if the
list is empty.

Instead of checking the pointer it should be checked if
the list is empty.

Fixes: 83ff9dcf375c ("powerpc/sysdev: implement FSL GTM support")
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220228142434.576226-1-jakobkoschel@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: Reduce warnings on possible RW1C corruption

[ Upstream commit 92c45b63ce22c8898aa41806e8d6692bcd577510 ]

For hardware that only supports 32-bit writes to PCI there is the
possibility of clearing RW1C (write-one-to-clear) bits. A rate-limited
messages was introduced by fb2659230120, but rate-limiting is not the best
choice here. Some devices may not show the warnings they should if another
device has just produced a bunch of warnings. Also, the number of messages
can be a nuisance on devices which are otherwise working fine.

Change the ratelimit to a single warning per bus. This ensures no bus is
'starved' of emitting a warning and also that there isn't a continuous
stream of warnings. It would be preferable to have a warning per device,
but the pci_dev structure is not available here, and a lookup from devfn
would be far too slow.

Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Fixes: fb2659230120 ("PCI: Warn on possible RW1C corruption for sub-32 bit config writes")
Link: https://lore.kernel.org/r/20200806041455.11070-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: wm8350-power: Add missing free in free_charger_irq

[ Upstream commit 6dee930f6f6776d1e5a7edf542c6863b47d9f078 ]

In free_charger_irq(), there is no free for 'WM8350_IRQ_CHG_FAST_RDY'.
Therefore, it should be better to add it in order to avoid the memory leak.

Fixes: 14431aa0c5a4 ("power_supply: Add support for WM8350 PMU")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: wm8350-power: Handle error for wm8350_register_irq

[ Upstream commit b0b14b5ba11bec56fad344a4a0b2e16449cc8b94 ]

As the potential failure of the wm8350_register_irq(),
it should be better to check it and return error if fails.
Also, use 'free_' in order to avoid same code.

Fixes: 14431aa0c5a4 ("power_supply: Add support for WM8350 PMU")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: xiic: Make bus names unique

[ Upstream commit 1d366c2f9df8279df2adbb60471f86fc40a1c39e ]

This driver is for an FPGA logic core, so there can be arbitrarily many
instances of the bus on a given system. Previously all of the I2C bus
names were "xiic-i2c" which caused issues with lm_sensors when trying to
map human-readable names to sensor inputs because it could not properly
distinguish the busses, for example. Append the platform device name to
the I2C bus name so it is unique between different instances.

Fixes: e1d5b6598cdc ("i2c: Add support for Xilinx XPS IIC Bus Interface")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86/emulator: Defer not-present segment check in __load_segment_descriptor()

[ Upstream commit ca85f002258fdac3762c57d12d5e6e401b6a41af ]

Per Intel's SDM on the "Instruction Set Reference", when
loading segment descriptor, not-present segment check should
be after all type and privilege checks. But the emulator checks
it first, then #NP is triggered instead of #GP if privilege fails
and segment is not present. Put not-present segment check after
type and privilege checks in __load_segment_descriptor().

Fixes: 38ba30ba51a00 (KVM: x86 emulator: Emulate task switch in emulator.c)
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Message-Id: <52573c01d369f506cadcf7233812427cf7db81a7.1644292363.git.houwenlong.hwl@antgroup.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86: Fix emulation in writing cr8

[ Upstream commit f66af9f222f08d5b11ea41c1bd6c07a0f12daa07 ]

In emulation of writing to cr8, one of the lowest four bits in TPR[3:0]
is kept.

According to Intel SDM 10.8.6.1(baremetal scenario):
"APIC.TPR[bits 7:4] = CR8[bits 3:0], APIC.TPR[bits 3:0] = 0";

and SDM 28.3(use TPR shadow):
"MOV to CR8. The instruction stores bits 3:0 of its source operand into
bits 7:4 of VTPR; the remainder of VTPR (bits 3:0 and bits 31:8) are
cleared.";

and AMD's APM 16.6.4:
"Task Priority Sub-class (TPS)-Bits 3 : 0. The TPS field indicates the
current sub-priority to be used when arbitrating lowest-priority messages.
This field is written with zero when TPR is written using the architectural
CR8 register.";

so in KVM emulated scenario, clear TPR[3:0] to make a consistent behavior
as in other scenarios.

This doesn't impact evaluation and delivery of pending virtual interrupts
because processor does not use the processor-priority sub-class to
determine which interrupts to delivery and which to inhibit.

Sub-class is used by hardware to arbitrate lowest priority interrupts,
but KVM just does a round-robin style delivery.

Fixes: b93463aa59d6 ("KVM: Accelerated apic support")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220210094506.20181-1-zhenzhong.duan@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: bq24190_charger: Fix bq24190_vbus_is_enabled() wrong false return

[ Upstream commit f7731754fdce33dad19be746f647d6ac47c5d695 ]

The datasheet says that the BQ24190_REG_POC_CHG_CONFIG bits can
have a value of either 10(0x2) or 11(0x3) for OTG (5V boost regulator)
mode.

Sofar bq24190_vbus_is_enabled() was only checking for 10 but some BIOS-es
uses 11 when enabling the regulator at boot.

Make bq24190_vbus_is_enabled() also check for 11 so that it does not
wrongly returns false when the bits are set to 11.

Fixes: 66b6bef2c4e0 ("power: supply: bq24190_charger: Export 5V boost converter as regulator")
Cc: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/tegra: Fix reference leak in tegra_dsi_ganged_probe

[ Upstream commit 221e3638feb8bc42143833c9a704fa89b6c366bb ]

The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore. Add put_device() call to fix this.

Fixes: e94236cde4d5 ("drm/tegra: dsi: Add ganged mode support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext2: correct max file size computing

[ Upstream commit 50b3a818991074177a56c87124c7a7bdf5fa4f67 ]

We need to calculate the max file size accurately if the total blocks
that can address by block tree exceed the upper_limit. But this check is
not correct now, it only compute the total data blocks but missing
metadata blocks are needed. So in the case of "data blocks < upper_limit
&& total blocks > upper_limit", we will get wrong result. Fortunately,
this case could not happen in reality, but it's confused and better to
correct the computing.

  bits   data blocks   metadatablocks   upper_limit
  10        16843020            66051    2147483647
  11       134480396           263171    1073741823
  12      1074791436          1050627     536870911 (*)
  13      8594130956          4198403     268435455 (*)
  14     68736258060         16785411     134217727 (*)
  15    549822930956         67125251      67108863 (*)
  16   4398314962956        268468227      33554431 (*)

  [*] Need to calculate in depth.

Fixes: 1c2d14212b15 ("ext2: Fix underflow in ext2_max_size()")
Link: https://lore.kernel.org/r/20220212050532.179055-1-yi.zhang@huawei.com
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

TOMOYO: fix __setup handlers return values

[ Upstream commit 39844b7e3084baecef52d1498b5fa81afa2cefa9 ]

__setup() handlers should return 1 if the parameter is handled.
Returning 0 causes the entire string to be added to init's
environment strings (limited to 32 strings), unnecessarily polluting it.

Using the documented strings "TOMOYO_loader=string1" and
"TOMOYO_trigger=string2" causes an Unknown parameter message:
  Unknown kernel command line parameters
    "BOOT_IMAGE=/boot/bzImage-517rc5 TOMOYO_loader=string1 \
     TOMOYO_trigger=string2", will be passed to user space.

and these strings are added to init's environment string space:
  Run /sbin/init as init process
    with arguments:
     /sbin/init
    with environment:
     HOME=/
     TERM=linux
     BOOT_IMAGE=/boot/bzImage-517rc5
     TOMOYO_loader=string1
     TOMOYO_trigger=string2

With this change, these __setup handlers act as expected,
and init's environment is not polluted with these strings.

Fixes: 0e4ae0e0dec63 ("TOMOYO: Make several options configurable.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: https://lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: James Morris <jmorris@namei.org>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: tomoyo-dev-en@lists.osdn.me
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix abort all task initialization

[ Upstream commit 7f12845c8389855dbcc67baa068b6832dc4a396e ]

In pm80xx_send_abort_all(), the n_elem field of the ccb used is not
initialized to 0. This missing initialization sometimes lead to the task
completion path seeing the ccb with a non-zero n_elem resulting in the
execution of invalid dma_unmap_sg() calls in pm8001_ccb_task_free(),
causing a crash such as:

[  197.676341] RIP: 0010:iommu_dma_unmap_sg+0x6d/0x280
[  197.700204] RSP: 0018:ffff889bbcf89c88 EFLAGS: 00010012
[  197.705485] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83d0bda0
[  197.712687] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff88810dffc0d0
[  197.719887] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8881c790098b
[  197.727089] R10: ffffed1038f20131 R11: 0000000000000001 R12: 0000000000000000
[  197.734296] R13: ffff88810dffc0d0 R14: 0000000000000010 R15: 0000000000000000
[  197.741493] FS:  0000000000000000(0000) GS:ffff889bbcf80000(0000) knlGS:0000000000000000
[  197.749659] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  197.755459] CR2: 00007f16c1b42734 CR3: 0000000004814000 CR4: 0000000000350ee0
[  197.762656] Call Trace:
[  197.765127]  <IRQ>
[  197.767162]  pm8001_ccb_task_free+0x5f1/0x820 [pm80xx]
[  197.772364]  ? do_raw_spin_unlock+0x54/0x220
[  197.776680]  pm8001_mpi_task_abort_resp+0x2ce/0x4f0 [pm80xx]
[  197.782406]  process_oq+0xe85/0x7890 [pm80xx]
[  197.786817]  ? lock_acquire+0x194/0x490
[  197.790697]  ? handle_irq_event+0x10e/0x1b0
[  197.794920]  ? mpi_sata_completion+0x2d70/0x2d70 [pm80xx]
[  197.800378]  ? __wake_up_bit+0x100/0x100
[  197.804340]  ? lock_is_held_type+0x98/0x110
[  197.808565]  pm80xx_chip_isr+0x94/0x130 [pm80xx]
[  197.813243]  tasklet_action_common.constprop.0+0x24b/0x2f0
[  197.818785]  __do_softirq+0x1b5/0x82d
[  197.822485]  ? do_raw_spin_unlock+0x54/0x220
[  197.826799]  __irq_exit_rcu+0x17e/0x1e0
[  197.830678]  irq_exit_rcu+0xa/0x20
[  197.834114]  common_interrupt+0x78/0x90
[  197.840051]  </IRQ>
[  197.844236]  <TASK>
[  197.848397]  asm_common_interrupt+0x1e/0x40

Avoid this issue by always initializing the ccb n_elem field to 0 in
pm8001_send_abort_all(), pm8001_send_read_log() and
pm80xx_send_abort_all().

Link: https://lore.kernel.org/r/20220220031810.738362-17-damien.lemoal@opensource.wdc.com
Fixes: c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix payload initialization in pm80xx_set_thermal_config()

[ Upstream commit bb225b12dbcc82d53d637d10b8d70b64494f8c16 ]

The fields of the set_ctrl_cfg_req structure have the __le32 type, so use
cpu_to_le32() to assign them. This removes the sparse warnings:

warning: incorrect type in assignment (different base types)
    expected restricted __le32
    got unsigned int

Link: https://lore.kernel.org/r/20220220031810.738362-8-damien.lemoal@opensource.wdc.com
Fixes: 842784e0d15b ("pm80xx: Update For Thermal Page Code")
Fixes: f5860992db55 ("[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files")
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix command initialization in pm8001_chip_ssp_tm_req()

[ Upstream commit cd2268a180117aa8ebb23e090ba204324b2d0e93 ]

The ds_ads_m field of struct ssp_ini_tm_start_req has the type __le32.
Assigning a value to it should thus use cpu_to_le32(). This fixes the
sparse warning:

warning: incorrect type in assignment (different base types)
   expected restricted __le32 [addressable] [assigned] [usertype] ds_ads_m
   got int

Link: https://lore.kernel.org/r/20220220031810.738362-7-damien.lemoal@opensource.wdc.com
Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: pm8001: Fix command initialization in pm80XX_send_read_log()

[ Upstream commit 1a37b6738b58d86f6b144b3fc754ace0f2e0166d ]

Since the sata_cmd struct is zeroed out before its fields are initialized,
there is no need for using "|=" to initialize the ncqtag_atap_dir_m
field. Using a standard assignment removes the sparse warning:

warning: invalid assignment: |=

Also, since the ncqtag_atap_dir_m field has type __le32, use cpu_to_le32()
to generate the assigned value.

Link: https://lore.kernel.org/r/20220220031810.738362-5-damien.lemoal@opensource.wdc.com
Fixes: c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes")
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm crypt: fix get_key_size compiler warning if !CONFIG_KEYS

[ Upstream commit 6fc51504388c1a1a53db8faafe9fff78fccc7c87 ]

Explicitly convert unsigned int in the right of the conditional
expression to int to match the left side operand and the return type,
fixing the following compiler warning:

drivers/md/dm-crypt.c:2593:43: warning: signed and unsigned
type in conditional expression [-Wsign-compare]

Fixes: c538f6ec9f56 ("dm crypt: add ability to use keys from the kernel key retention service")
Signed-off-by: Aashish Sharma <shraash@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: Fix -EIO error code that is never returned

[ Upstream commit c305c94bdc18e45b5ad1db54da4269f8cbfdff6b ]

Currently the error -EIO is being assinged to variable ret when
the READY_BIT is not set but the function iwlagn_mac_start returns
0 rather than ret. Fix this by returning ret instead of 0.

Addresses-Coverity: ("Unused value")
Fixes: 7335613ae27a ("iwlwifi: move all mac80211 related functions to one place")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210907104658.14706-1-colin.king@canonical.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: i2c-hid: fix GET/SET_REPORT for unnumbered reports

[ Upstream commit a5e5e03e94764148a01757b2fa4737d3445c13a6 ]

Internally kernel prepends all report buffers, for both numbered and
unnumbered reports, with report ID, therefore to properly handle unnumbered
reports we should prepend it ourselves.

For the same reason we should skip the first byte of the buffer when
calling i2c_hid_set_or_send_report() which then will take care of properly
formatting the transfer buffer based on its separate report ID argument
along with report payload.

[jkosina@suse.cz: finalize trimmed sentence in changelog as spotted by Benjamin]
Fixes: 9b5a9ae88573 ("HID: i2c-hid: implement ll_driver transport-layer callbacks")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: ab8500: Fix memory leak in ab8500_fg_sysfs_init

[ Upstream commit 6a4760463dbc6b603690938c468839985189ce0a ]

kobject_init_and_add() takes reference even when it fails.
According to the doc of kobject_init_and_add()：

   If this function returns an error, kobject_put() must be called to
   properly clean up the memory associated with the object.

Fix memory leak by calling kobject_put().

Fixes: 8c0984e5a753 ("power: move power supply drivers to power/supply")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ray_cs: Check ioremap return value

[ Upstream commit 7e4760713391ee46dc913194b33ae234389a174e ]

As the possible failure of the ioremap(), the 'local->sram' and other
two could be NULL.
Therefore it should be better to check it in order to avoid the later
dev_dbg.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211230022926.1846757-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: reset: gemini-poweroff: Fix IRQ check in gemini_poweroff_probe

[ Upstream commit ba18dad0fb880cd29aa97b6b75560ef14d1061ba ]

platform_get_irq() returns negative error number instead 0 on failure.
And the doc of platform_get_irq() provides a usage example:

    int irq = platform_get_irq(pdev, 0);
    if (irq < 0)
        return irq;

Fix the check of return value to catch errors correctly.

Fixes: f7a388d6cd1c ("power: reset: Add a driver for the Gemini poweroff")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k_htc: fix uninit value bugs

[ Upstream commit d1e0df1c57bd30871dd1c855742a7c346dbca853 ]

Syzbot reported 2 KMSAN bugs in ath9k. All of them are caused by missing
field initialization.

In htc_connect_service() svc_meta_len and pad are not initialized. Based
on code it looks like in current skb there is no service data, so simply
initialize svc_meta_len to 0.

htc_issue_send() does not initialize htc_frame_hdr::control array. Based
on firmware code, it will initialize it by itself, so simply zero whole
array to make KMSAN happy

Fail logs:

BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
 usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
 hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline]
 hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479
 htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline]
 htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275
...

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:524 [inline]
 slab_alloc_node mm/slub.c:3251 [inline]
 __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
 kmalloc_reserve net/core/skbuff.c:354 [inline]
 __alloc_skb+0x545/0xf90 net/core/skbuff.c:426
 alloc_skb include/linux/skbuff.h:1126 [inline]
 htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258
...

Bytes 4-7 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00

BUG: KMSAN: kernel-usb-infoleak in usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
 usb_submit_urb+0x6c1/0x2aa0 drivers/usb/core/urb.c:430
 hif_usb_send_regout drivers/net/wireless/ath/ath9k/hif_usb.c:127 [inline]
 hif_usb_send+0x5f0/0x16f0 drivers/net/wireless/ath/ath9k/hif_usb.c:479
 htc_issue_send drivers/net/wireless/ath/ath9k/htc_hst.c:34 [inline]
 htc_connect_service+0x143e/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:275
...

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:524 [inline]
 slab_alloc_node mm/slub.c:3251 [inline]
 __kmalloc_node_track_caller+0xe0c/0x1510 mm/slub.c:4974
 kmalloc_reserve net/core/skbuff.c:354 [inline]
 __alloc_skb+0x545/0xf90 net/core/skbuff.c:426
 alloc_skb include/linux/skbuff.h:1126 [inline]
 htc_connect_service+0x1029/0x1960 drivers/net/wireless/ath/ath9k/htc_hst.c:258
...

Bytes 16-17 of 18 are uninitialized
Memory access of size 18 starts at ffff888027377e00

Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.")
Reported-by: syzbot+f83a1df1ed4f67e8d8ad@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220115122733.11160-1-paskripkin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/edid: Don't clear formats if using deep color

[ Upstream commit 75478b3b393bcbdca4e6da76fe3a9f1a4133ec5d ]

The current code, when parsing the EDID Deep Color depths, that the
YUV422 cannot be used, referring to the HDMI 1.3 Specification.

This specification, in its section 6.2.4, indeed states:

  For each supported Deep Color mode, RGB 4:4:4 shall be supported and
  optionally YCBCR 4:4:4 may be supported.

  YCBCR 4:2:2 is not permitted for any Deep Color mode.

This indeed can be interpreted like the code does, but the HDMI 1.4
specification further clarifies that statement in its section 6.2.4:

  For each supported Deep Color mode, RGB 4:4:4 shall be supported and
  optionally YCBCR 4:4:4 may be supported.

  YCBCR 4:2:2 is also 36-bit mode but does not require the further use
  of the Deep Color modes described in section 6.5.2 and 6.5.3.

This means that, even though YUV422 can be used with 12 bit per color,
it shouldn't be treated as a deep color mode.

This is also broken with YUV444 if it's supported by the display, but
DRM_EDID_HDMI_DC_Y444 isn't set. In such a case, the code will clear
color_formats of the YUV444 support set previously in
drm_parse_cea_ext(), but will not set it back.

Since the formats supported are already setup properly in
drm_parse_cea_ext(), let's just remove the code modifying the formats in
drm_parse_hdmi_deep_color_info()

Fixes: d0c94692e0a3 ("drm/edid: Parse and handle HDMI deep color modes.")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220120151625.594595-3-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: onenand: Check for error irq

[ Upstream commit 3e68f331c8c759c0daa31cc92c3449b23119a215 ]

For the possible failure of the platform_get_irq(), the returned irq
could be error number and will finally cause the failure of the
request_irq().
Consider that platform_get_irq() can now in certain cases return
-EPROBE_DEFER, and the consequences of letting request_irq() effectively
convert that into -EINVAL, even at probe time rather than later on.
So it might be better to check just now.

Fixes: 2c22120fbd01 ("MTD: OneNAND: interrupt based wait support")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220104162658.1988142-1-jiasheng@iscas.ac.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: msm8916-wcd-digital: Fix missing clk_disable_unprepare() in msm8916_wcd_digital_probe

[ Upstream commit 375a347da4889f64d86e1ab7f4e6702b6e9bf299 ]

Fix the missing clk_disable_unprepare() before return
from msm8916_wcd_digital_probe in the error handling case.

Fixes: 150db8c5afa1 ("ASoC: codecs: Add msm8916-wcd digital codec")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220307084523.28687-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: imx-es8328: Fix error return code in imx_es8328_probe()

[ Upstream commit 3b891513f95cba3944e72c1139ea706d04f3781b ]

Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.

Fixes: 7e7292dba215 ("ASoC: fsl: add imx-es8328 machine driver")
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Link: https://lore.kernel.org/r/20220310091902.129299-1-wangwensheng4@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mxs: Fix error handling in mxs_sgtl5000_probe

[ Upstream commit 6ae0a4d8fec551ec581d620f0eb1fe31f755551c ]

This function only calls of_node_put() in the regular path.
And it will cause refcount leak in error paths.
For example, when codec_np is NULL, saif_np[0] and saif_np[1]
are not NULL, it will cause leaks.

of_node_put() will check if the node pointer is NULL, so we can
call it directly to release the refcount of regular pointers.

Fixes: e968194b45c4 ("ASoC: mxs: add device tree support for mxs-sgtl5000")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20220308020146.26496-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: dmaengine: do not use a NULL prepare_slave_config() callback

[ Upstream commit 9a1e13440a4f2e7566fd4c5eae6a53e6400e08a4 ]

Even if struct snd_dmaengine_pcm_config is used, prepare_slave_config()
callback might not be set. Check if this callback is set before using it.

Fixes: fa654e085300 ("ASoC: dmaengine-pcm: Provide default config")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220307122202.2251639-2-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

video: fbdev: omapfb: Add missing of_node_put() in dvic_probe_of

[ Upstream commit a58c22cfbbf62fefca090334bbd35fd132e92a23 ]

The device_node pointer is returned by of_parse_phandle()  with refcount
incremented. We should use of_node_put() on it when done.

Fixes: f76ee892a99e ("omapfb: copy omapdss & displays for omapfb")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsi: Add check for clk_enable

[ Upstream commit 405afed8a728f23cfaa02f75bbc8bdd6b7322123 ]

As the potential failure of the clk_enable(),
it should be better to check it and return error
if fails.

Fixes: ab6f6d85210c ("ASoC: fsi: add master clock control functions")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220302062844.46869-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: wm8350: Handle error for wm8350_register_irq

[ Upstream commit db0350da8084ad549bca16cc0486c11cc70a1f9b ]

As the potential failure of the wm8350_register_irq(),
it should be better to check it and return error if fails.
Also, use 'free_' in order to avoid the same code.

Fixes: a6ba2b2dabb5 ("ASoC: Implement WM8350 headphone jack detection")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220304023821.391936-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: atmel: Add missing of_node_put() in at91sam9g20ek_audio_probe

[ Upstream commit f590797fa3c1bccdd19e55441592a23b46aef449 ]

This node pointer is returned by of_parse_phandle() with refcount
incremented in this function.
Calling of_node_put() to avoid the refcount leak.

Fixes: 531f67e41dcd ("ASoC: at91sam9g20ek-wm8731: convert to dt support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220307124539.1743-1-linmq006@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: stk1160: If start stream fails, return buffers with VB2_BUF_STATE_QUEUED

[ Upstream commit fbe04b49a54e31f4321d632270207f0e6304cd16 ]

If the callback 'start_streaming' fails, then all
queued buffers in the driver should be returned with
state 'VB2_BUF_STATE_QUEUED'. Currently, they are
returned with 'VB2_BUF_STATE_ERROR' which is wrong.
Fix this. This also fixes the warning:

[   65.583633] WARNING: CPU: 5 PID: 593 at drivers/media/common/videobuf2/videobuf2-core.c:1612 vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[   65.585027] Modules linked in: snd_usb_audio snd_hwdep snd_usbmidi_lib snd_rawmidi snd_soc_hdmi_codec dw_hdmi_i2s_audio saa7115 stk1160 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc crct10dif_ce panfrost snd_soc_simple_card snd_soc_audio_graph_card snd_soc_spdif_tx snd_soc_simple_card_utils gpu_sched phy_rockchip_pcie snd_soc_rockchip_i2s rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi cec drm_kms_helper drm rtc_rk808 rockchip_saradc industrialio_triggered_buffer kfifo_buf rockchip_thermal pcie_rockchip_host ip_tables x_tables ipv6
[   65.589383] CPU: 5 PID: 593 Comm: v4l2src0:src Tainted: G        W         5.16.0-rc4-62408-g32447129cb30-dirty #14
[   65.590293] Hardware name: Radxa ROCK Pi 4B (DT)
[   65.590696] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   65.591304] pc : vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[   65.591850] lr : vb2_start_streaming+0x6c/0x160 [videobuf2_common]
[   65.592395] sp : ffff800012bc3ad0
[   65.592685] x29: ffff800012bc3ad0 x28: 0000000000000000 x27: ffff800012bc3cd8
[   65.593312] x26: 0000000000000000 x25: ffff00000d8a7800 x24: 0000000040045612
[   65.593938] x23: ffff800011323000 x22: ffff800012bc3cd8 x21: ffff00000908a8b0
[   65.594562] x20: ffff00000908a8c8 x19: 00000000fffffff4 x18: ffffffffffffffff
[   65.595188] x17: 000000040044ffff x16: 00400034b5503510 x15: ffff800011323f78
[   65.595813] x14: ffff000013163886 x13: ffff000013163885 x12: 00000000000002ce
[   65.596439] x11: 0000000000000028 x10: 0000000000000001 x9 : 0000000000000228
[   65.597064] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff726c5e78
[   65.597690] x5 : ffff800012bc3990 x4 : 0000000000000000 x3 : ffff000009a34880
[   65.598315] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000007cd99f0
[   65.598940] Call trace:
[   65.599155]  vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[   65.599672]  vb2_core_streamon+0x17c/0x1a8 [videobuf2_common]
[   65.600179]  vb2_streamon+0x54/0x88 [videobuf2_v4l2]
[   65.600619]  vb2_ioctl_streamon+0x54/0x60 [videobuf2_v4l2]
[   65.601103]  v4l_streamon+0x3c/0x50 [videodev]
[   65.601521]  __video_do_ioctl+0x1a4/0x428 [videodev]
[   65.601977]  video_usercopy+0x320/0x828 [videodev]
[   65.602419]  video_ioctl2+0x3c/0x58 [videodev]
[   65.602830]  v4l2_ioctl+0x60/0x90 [videodev]
[   65.603227]  __arm64_sys_ioctl+0xa8/0xe0
[   65.603576]  invoke_syscall+0x54/0x118
[   65.603911]  el0_svc_common.constprop.3+0x84/0x100
[   65.604332]  do_el0_svc+0x34/0xa0
[   65.604625]  el0_svc+0x1c/0x50
[   65.604897]  el0t_64_sync_handler+0x88/0xb0
[   65.605264]  el0t_64_sync+0x16c/0x170
[   65.605587] ---[ end trace 578e0ba07742170d ]---

Fixes: 8ac456495a33d ("[media] stk1160: Stop device and unqueue buffers when start_streaming() fails")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: firewire-lib: fix uninitialized flag for AV/C deferred transaction

[ Upstream commit bf0cd60b7e33cf221fbe1114e4acb2c828b0af0d ]

AV/C deferred transaction was supported at a commit 00a7bb81c20f ("ALSA:
firewire-lib: Add support for deferred transaction") while 'deferrable'
flag can be uninitialized for non-control/notify AV/C transactions.
UBSAN reports it:

kernel: ================================================================================
kernel: UBSAN: invalid-load in /build/linux-aa0B4d/linux-5.15.0/sound/firewire/fcp.c:363:9
kernel: load of value 158 is not a valid value for type '_Bool'
kernel: CPU: 3 PID: 182227 Comm: irq/35-firewire Tainted: P           OE     5.15.0-18-generic #18-Ubuntu
kernel: Hardware name: Gigabyte Technology Co., Ltd. AX370-Gaming 5/AX370-Gaming 5, BIOS F42b 08/01/2019
kernel: Call Trace:
kernel:  <IRQ>
kernel:  show_stack+0x52/0x58
kernel:  dump_stack_lvl+0x4a/0x5f
kernel:  dump_stack+0x10/0x12
kernel:  ubsan_epilogue+0x9/0x45
kernel:  __ubsan_handle_load_invalid_value.cold+0x44/0x49
kernel:  fcp_response.part.0.cold+0x1a/0x2b [snd_firewire_lib]
kernel:  fcp_response+0x28/0x30 [snd_firewire_lib]
kernel:  fw_core_handle_request+0x230/0x3d0 [firewire_core]
kernel:  handle_ar_packet+0x1d9/0x200 [firewire_ohci]
kernel:  ? handle_ar_packet+0x1d9/0x200 [firewire_ohci]
kernel:  ? transmit_complete_callback+0x9f/0x120 [firewire_core]
kernel:  ar_context_tasklet+0xa8/0x2e0 [firewire_ohci]
kernel:  tasklet_action_common.constprop.0+0xea/0xf0
kernel:  tasklet_action+0x22/0x30
kernel:  __do_softirq+0xd9/0x2e3
kernel:  ? irq_finalize_oneshot.part.0+0xf0/0xf0
kernel:  do_softirq+0x75/0xa0
kernel:  </IRQ>
kernel:  <TASK>
kernel:  __local_bh_enable_ip+0x50/0x60
kernel:  irq_forced_thread_fn+0x7e/0x90
kernel:  irq_thread+0xba/0x190
kernel:  ? irq_thread_fn+0x60/0x60
kernel:  kthread+0x11e/0x140
kernel:  ? irq_thread_check_affinity+0xf0/0xf0
kernel:  ? set_kthread_struct+0x50/0x50
kernel:  ret_from_fork+0x22/0x30
kernel:  </TASK>
kernel: ================================================================================

This commit fixes the bug. The bug has no disadvantage for the non-
control/notify AV/C transactions since the flag has an effect for AV/C
response with INTERIM (0x0f) status which is not used for the transactions
in AV/C general specification.

Fixes: 00a7bb81c20f ("ALSA: firewire-lib: Add support for deferred transaction")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20220304125647.78430-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: emif: check the pointer temp in get_device_details()

[ Upstream commit 5b5ab1bfa1898c6d52936a57c25c5ceba2cb2f87 ]

The pointer temp is allocated by devm_kzalloc(), so it should be
checked for error handling.

Fixes: 7ec944538dde ("memory: emif: add basic infrastructure for EMIF driver")
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20220225132552.27894-1-baijiaju1990@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: emif: Add check for setup_interrupts

[ Upstream commit fd7bd80b46373887b390852f490f21b07e209498 ]

As the potential failure of the devm_request_threaded_irq(),
it should be better to check the return value of the
setup_interrupts() and return error if fails.

Fixes: 68b4aee35d1f ("memory: emif: add interrupt and temperature handling")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220224025444.3256530-1-jiasheng@iscas.ac.cn
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: atmel_ssc_dai: Handle errors for clk_enable

[ Upstream commit f9e2ca0640e59d19af0ff285ee5591ed39069b09 ]

As the potential failure of the clk_enable(),
it should be better to check it and return error if fals.

Fixes: cbaadf0f90d6 ("ASoC: atmel_ssc_dai: refactor the startup and shutdown")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220301090637.3776558-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mxs-saif: Handle errors for clk_enable

[ Upstream commit 2ecf362d220317debf5da376e0390e9f7a3f7b29 ]

As the potential failure of the clk_enable(),
it should be better to check it, like mxs_saif_trigger().

Fixes: d0ba4c014934 ("ASoC: mxs-saif: set a base clock rate for EXTMASTER mode work")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220301081717.3727190-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

printk: fix return value of printk.devkmsg __setup handler

[ Upstream commit b665eae7a788c5e2bc10f9ac3c0137aa0ad1fc97 ]

If an invalid option value is used with "printk.devkmsg=<value>",
it is silently ignored.
If a valid option value is used, it is honored but the wrong return
value (0) is used, indicating that the command line option had an
error and was not handled. This string is not added to init's
environment strings due to init/main.c::unknown_bootoption()
checking for a '.' in the boot option string and then considering
that string to be an "Unused module parameter".

Print a warning message if a bad option string is used.
Always return 1 from the __setup handler to indicate that the command
line option has been handled.

Fixes: 750afe7babd1 ("printk: add kernel parameter to control writes to /dev/kmsg")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Cc: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220228220556.23484-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: broadcom: Fix sata nodename

[ Upstream commit 55927cb44db43a57699fa652e2437a91620385dc ]

After converting ahci-platform txt binding to yaml nodename is reported
as not matching the standard:

arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dt.yaml:
ahci@663f2000: $nodename:0: 'ahci@663f2000' does not match '^sata(@.*)?$'

Fix it to match binding.

Fixes: ac9aae00f0fc ("arm64: dts: Add SATA3 AHCI and SATA3 PHY DT nodes for NS2")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: ns2: Fix spi-cpol and spi-cpha property

[ Upstream commit c953c764e505428f59ffe6afb1c73b89b5b1ac35 ]

Broadcom ns2 platform has spi-cpol and spi-cpho properties set
incorrectly. As per spi-slave-peripheral-prop.yaml, these properties are
of flag or boolean type and not integer type. Fix the values.

Fixes: d69dbd9f41a7c (arm64: dts: Add ARM PL022 SPI DT nodes for NS2)
Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com>
CC: Ray Jui <rjui@broadcom.com>
CC: Scott Branden <sbranden@broadcom.com>
CC: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>