Andrzej Hajda [Fri, 25 Sep 2015 12:48:23 +0000 (14:48 +0200)]
drm/exynos/hdmi: simplify clock re-parenting
Driver tries to disable sclk_hdmi during re-parenting, to avoid possible
glitches. It is ineffective as the clock is used also by other devices (mixer).
Anyway driver works without disabling sclk_hdmi.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Fri, 25 Sep 2015 12:48:22 +0000 (14:48 +0200)]
drm/exynos/hdmi: use constant size array for regulators
Driver always uses the same number of regulators, so there is no point in
dynamic allocation.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Fri, 25 Sep 2015 12:48:21 +0000 (14:48 +0200)]
drm/exynos/hdmi: use optional regulator_get for hdmi-en
hdmi-en is an optional regulator so it should be better handled by
devm_regulator_get_optional call.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Fri, 25 Sep 2015 12:48:20 +0000 (14:48 +0200)]
drm/exynos/hdmi: fix removal order
DRM device should be destroyed before releasing resources.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Fri, 25 Sep 2015 12:48:19 +0000 (14:48 +0200)]
drm/exynos/hdmi: replace all writeb with writel
Registers are 32-bit, even if only lower 8-bits are used.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Fri, 25 Sep 2015 12:48:18 +0000 (14:48 +0200)]
drm/exynos/hdmi: simplify HDMI-PHY power sequence
Currently driver tries to set specific HDMI-PHY registers in three situations:
- before reset,
- before power off,
- after applying HDMI-PHY configuration.
First two cases seems to be unnecessary - register contents will be lost
anyway. The third case can be merged with HDMI-PHY configuration by fixing
the last byte of configuration data.
The patch has been tested with following platforms:
- exynos4210-universal_c210,
- exynos4412-odroidu3,
- exynos5422-odroidxu3.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Fri, 25 Sep 2015 12:48:17 +0000 (14:48 +0200)]
drm/exynos/hdmi: move PLL stabilization check code to separate function
The patch moves PLL stabilization check to separate function, adjust timeout
parameters and de-duplicates code common for both HW variants.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Fri, 25 Sep 2015 12:48:16 +0000 (14:48 +0200)]
drm/exynos/hdmi: use mappings for registers with IP dependent address
Some registers resides at different offsets depending on device version.
This patch adds infrastructure for mapping such registers to proper address
based on hdmi_type. It adds also mappings to some registers.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Andrzej Hajda [Fri, 25 Sep 2015 12:48:14 +0000 (14:48 +0200)]
drm/exynos/hdmi: remove support for deprecated compatible
This compatible was marked as deprecated in Jun 2013 and it is not used since
then. Additionally its driver data points to wrong pll settings, so it
cannot work anyway.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Dave Airlie [Fri, 23 Oct 2015 01:54:03 +0000 (11:54 +1000)]
Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm-next
A bit smaller pull this time. Few minor things, plus initial support
for msm8996 (snapdragon 820).. Sorry, a bit latish, was hoping to get
some 8960/8064 DSI stuff included. But still waiting on the v2 of the
patchset (just pending some minor review comments). It would be nice
to get the DSI patches merged since it would help some folks trying to
get upstream kernel running on n4/n7 and xperia z and wanting to write
some more panel drivers. Also, waiting for OCMEM driver to get merged
via other trees and then I have a small bit to go along with that to
make the gpu actually work on devices w/ OCMEM (snapdragon 800, 805,
etc). So maybe a second later pull req, time permitting.
* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
drm/msm: Remove local fbdev emulation Kconfig option
drm/msm/mdp5: Basic support for MDP5 v1.7 (MSM8996)
drm/msm/mdp: Add Software Pixel Extension support
drm/msm/mdp5: Use the newly introduced enum mdp_component_type
drm/msm/hdmi: Add basic HDMI support for msm8996
drm/msm/mdp5: Avoid printing error messages for optional clocks
drm/msm: Fix IOMMU clean up path in case msm_iommu_new() fails
drm/msm/mdp5: remove the cfg pointer from SMP struct
drm/msm/dsi: Updata LNn_CFG4 register settings for 28nm PHY
drm: msm: dsi: Don't attempt changing voltage of switches
drm/msm: update generated headers
Archit Taneja [Mon, 13 Jul 2015 06:42:07 +0000 (12:12 +0530)]
drm/msm: Remove local fbdev emulation Kconfig option
DRM_MSM_FBDEV config is used to enable/disable fbdev emulation for the
msm kms driver.
Replace this with the top level DRM_FBDEV_EMULATION config option where
applicable. This also prevents build breaks caused by undefined
drm_fb_helper_* functions when legacy fbdev support was disabled.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Stephane Viau [Tue, 15 Sep 2015 12:41:53 +0000 (08:41 -0400)]
drm/msm/mdp5: Basic support for MDP5 v1.7 (MSM8996)
This change adds the basic MDP5 support for MSM8996.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Stephane Viau [Tue, 15 Sep 2015 12:41:52 +0000 (08:41 -0400)]
drm/msm/mdp: Add Software Pixel Extension support
In order to produce an image, the scalar needs to be fed extra
pixels. These top/bottom/left/right values depend on a various of
factors, including resolution, scaling type, phase step and
initial phase.
Pixel Extension are programmed by hardware in most targets - and
can be overwritten by software. For some targets (e.g.: msm8996),
software *must* program those registers.
In order to ease this computation, let's always use bilinear
filters, which are easier to program from kernel. Eventually,
all of these values will come down from user space for better
quality.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Stephane Viau [Tue, 15 Sep 2015 12:41:51 +0000 (08:41 -0400)]
drm/msm/mdp5: Use the newly introduced enum mdp_component_type
When calculating phase steps, let's use the same enum
mdp_component_type in order to ease the readability; 0/1 indexes
are a bit confusing and we now have explicit values to index
this type of arrays.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Stephane Viau [Tue, 15 Sep 2015 12:41:49 +0000 (08:41 -0400)]
drm/msm/hdmi: Add basic HDMI support for msm8996
The HDMI controller is new in MDP5 v1.7. As of now, this change
doesn't reflect the novelty and only adds the basics so the probe
gets triggered.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Stephane Viau [Tue, 15 Sep 2015 12:41:47 +0000 (08:41 -0400)]
drm/msm/mdp5: Avoid printing error messages for optional clocks
The current behavior is to try to get optional clocks and print a
dev_err message in case of failure. This looks rather confusing
and may increase with the amount of optional clocks.
We may need a cleaner way to handle per-device clocks but in the
meantime, let's reduce the amount of dev_err messages during the
probe.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Stephane Viau [Tue, 15 Sep 2015 12:41:46 +0000 (08:41 -0400)]
drm/msm: Fix IOMMU clean up path in case msm_iommu_new() fails
msm_iommu_new() can fail and this change makes sure that we
detect the failure and free the allocated domain before going
any further.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Stephane Viau [Tue, 15 Sep 2015 12:41:44 +0000 (08:41 -0400)]
drm/msm/mdp5: remove the cfg pointer from SMP struct
We want to make sure we control all the information being passed
down to SMP block. Having access to the cfg pointer here may create
bad things in the future.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Hai Li [Fri, 11 Sep 2015 19:56:09 +0000 (15:56 -0400)]
drm/msm/dsi: Updata LNn_CFG4 register settings for 28nm PHY
The current settings for 28nm PHY data lane CFG4 registers do
not work with certain panels. This change is to modify them to
hw recommended values.
Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Bjorn Andersson [Tue, 18 Aug 2015 17:34:32 +0000 (10:34 -0700)]
drm: msm: dsi: Don't attempt changing voltage of switches
In some configurations the supplies are voltage switches and not LDOs,
making the set voltage call to fail. Check with the regulator framework
if the supply can change voltage before attempting.
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Rob Clark [Thu, 22 Oct 2015 16:36:57 +0000 (12:36 -0400)]
drm/msm: update generated headers
Signed-off-by: Rob Clark <robdclark@gmail.com>
Dave Airlie [Thu, 22 Oct 2015 00:31:43 +0000 (10:31 +1000)]
Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev into drm-next
rcar-du support for r8a7793/4
* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev:
drm: rcar-du: Add support for the R8A7794 DU
drm: rcar-du: Add support for the R8A7793 DU
Dave Airlie [Thu, 22 Oct 2015 00:23:31 +0000 (10:23 +1000)]
Merge tag 'drm-vc4-next-2015-10-21' of github.com/anholt/linux into drm-next
This pull request introduces the vc4 driver, for kernel modesetting on
the Raspberry Pi (bcm2835/bcm2836 architectures). It currently
supports a display plane and cursor on the HDMI output. The driver
doesn't do 3D, power management, or overlay planes yet.
[airlied: fixup the enable/disable vblank APIs]
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* tag 'drm-vc4-next-2015-10-21' of http://github.com/anholt/linux:
drm/vc4: Allow vblank to be disabled
drm/vc4: Use the fbdev_cma helpers
drm/vc4: Add KMS support for Raspberry Pi.
drm/vc4: Add devicetree bindings for VC4.
Laurent Pinchart [Fri, 17 Jul 2015 07:44:33 +0000 (10:44 +0300)]
drm: rcar-du: Add support for the R8A7794 DU
The R8A7794 DU has a fixed output routing configuration with one RGB
output per CRTC and thus lacks the RGB output routing register field.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Fri, 17 Jul 2015 07:44:33 +0000 (10:44 +0300)]
drm: rcar-du: Add support for the R8A7793 DU
The R8A7793 DU is identical to the R8A7791 and thus only requires a new
DT compatible string.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Derek Foreman [Thu, 2 Jul 2015 16:20:21 +0000 (11:20 -0500)]
drm/vc4: Allow vblank to be disabled
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Derek Foreman [Thu, 2 Jul 2015 16:19:54 +0000 (11:19 -0500)]
drm/vc4: Use the fbdev_cma helpers
Keep the fbdev_cma pointer around so we can use it on hotplog and close
to ensure the frame buffer console is in a useful state.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Eric Anholt [Mon, 2 Mar 2015 21:01:12 +0000 (13:01 -0800)]
drm/vc4: Add KMS support for Raspberry Pi.
This is enough for fbcon and bringing up X using
xf86-video-modesetting. It doesn't support the 3D accelerator or
power management yet.
v2: Drop FB_HELPER select thanks to Archit's patches. Do manual init
ordering instead of using the .load hook. Structure registration
more like tegra's, but still using the typical "component" code.
Drop no-op hooks for atomic_begin and mode_fixup() now that
they're optional. Drop sentinel in Makefile. Fix minor style
nits I noticed on another reread.
v3: Use the new bcm2835 clk driver to manage pixel/HSM clocks instead
of having a fixed video mode. Use exynos-style component driver
matching instead of devicetree nodes to list the component driver
instances. Rename compatibility strings to say bcm2835, and
distinguish pv0/1/2. Clean up some h/vsync code, and add in
interlaced mode setup. Fix up probe/bind error paths. Use
bitops.h macros for vc4_regs.h
v4: Include i2c.h, allow building under COMPILE_TEST, drop msleep now
that other bugs have been fixed, add timeouts to cpu_relax()
loops, rename hpd-gpio to hpd-gpios.
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Eric Anholt [Tue, 11 Aug 2015 20:17:11 +0000 (13:17 -0700)]
drm/vc4: Add devicetree bindings for VC4.
VC4 is the GPU (display and 3D) subsystem present on the 2835 and some
other Broadcom SoCs.
This binding follows the model of msm, imx, sti, and others, where
there is a subsystem node for the whole GPU, with nodes for the
individual HW components within it.
v2: Extend the commit message, fix several nits from Stephen Warren.
v3: Rename the compatibility strings, clean up node names, drop the
unnecessary lists of components. Use compatibility strings for
choosing CRTC HVS channel numbers. Document the HDMI clock usage.
v4: Whitespace fix, expand acronyms, move to display/ instead of gpu/,
rename "hpd-gpio" to "hpd-gpios".
Signed-off-by: Eric Anholt <eric@anholt.net>
Dave Airlie [Mon, 19 Oct 2015 23:01:49 +0000 (09:01 +1000)]
Merge tag 'topic/drm-misc-2015-10-19' of git://anongit.freedesktop.org/drm-intel into drm-next
More drm-misc for 4.4.
- fb refcount fix in atomic fbdev
- various locking reworks to reduce drm_global_mutex and dev->struct_mutex
- rename docbook to gpu.tmpl and include vga_switcheroo stuff, plus more
vga_switcheroo (Lukas Wunner)
- viewport check fixes for atomic drivers from Ville
- DRM_DEBUG_VBL from Ville
- non-contentious header fixes from Mikko Rapeli
- small things all over
* tag 'topic/drm-misc-2015-10-19' of git://anongit.freedesktop.org/drm-intel: (31 commits)
drm/fb-helper: Fix fb refcounting in pan_display_atomic
drm/fb-helper: Set plane rotation directly
drm: fix mutex leak in drm_dp_get_mst_branch_device
drm: Check plane src coordinates correctly during page flip for atomic drivers
drm: Check crtc viewport correctly with rotated primary plane on atomic drivers
drm: Refactor plane src coordinate checks
drm: Swap w/h when converting the mode to src coordidates for a rotated primary plane
drm: Don't leak fb when plane crtc coodinates are bad
ALSA: hda - Spell vga_switcheroo consistently
drm/gem: Use kref_get_unless_zero for the weak mmap references
drm/vgem: Drop vgem_drm_gem_mmap
drm: Fix return value of drm_framebuffer_init()
drm/gem: Use container_of in drm_gem_object_free
drm/gem: Check locking in drm_gem_object_unreference
drm/gem: Drop struct_mutex requirement from drm_gem_mmap_obj
drm/i810_drm.h: include drm/drm.h
r128_drm.h: include drm/drm.h
savage_drm.h: include <drm/drm.h>
gpu/doc: Convert to markdown harder
gpu/doc: Add vga_switcheroo documentation
...
Dave Airlie [Mon, 19 Oct 2015 23:00:01 +0000 (09:00 +1000)]
Merge tag 'drm-intel-next-2015-10-10' of git://anongit.freedesktop.org/drm-intel into drm-next
- dmc fixes from Animesh (not yet all) for deeper sleep states
- piles of prep patches from Ville to make mmio functions type-safe
- more fbc work from Paulo all over
- w/a shuffling from Arun Siluvery
- first part of atomic watermark updates from Matt and Ville (later parts had to
be dropped again unfortunately)
- lots of patches to prepare bxt dsi support ( Shashank Sharma)
- userptr fixes from Chris
- audio rate interface between i915/snd_hda plus kerneldoc (Libin Yang)
- shrinker improvements and fixes (Chris Wilson)
- lots and lots of small patches all over
* tag 'drm-intel-next-2015-10-10' of git://anongit.freedesktop.org/drm-intel: (134 commits)
drm/i915: Update DRIVER_DATE to
20151010
drm/i915: Partial revert of atomic watermark series
drm/i915: Early exit from semaphore_waits_for for execlist mode.
drm/i915: Remove wrong warning from i915_gem_context_clean
drm/i915: Determine the stolen memory base address on gen2
drm/i915: fix FBC buffer size checks
drm/i915: fix CFB size calculation
drm/i915: remove pre-atomic check from SKL update_primary_plane
drm/i915: don't allocate fbcon from stolen memory if it's too big
Revert "drm/i915: Call encoder hotplug for init and resume cases"
Revert "drm/i915: Add hot_plug hook for hdmi encoder"
drm/i915: use error path
drm/i915/irq: Fix misspelled word register in kernel-doc
drm/i915/irq: Fix kernel-doc warnings
drm/i915: Hook up ring workaround writes at context creation time on Gen6-7.
drm/i915: Don't warn if the workaround list is empty.
drm/i915: Resurrect golden context on gen6/7
drm/i915/chv: remove pre-production hardware workarounds
drm/i915/snb: remove pre-production hardware workaround
drm/i915/bxt: Set time interval unit to 0.833us
...
Dave Airlie [Mon, 19 Oct 2015 22:58:45 +0000 (08:58 +1000)]
Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev into drm-next
some rcar fixes.
* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev:
drm: rcar-du: Fix plane state free in plane reset handler
drm: rcar-du: Enable DU0 to DPAD connection on R8A7791
drm: rcar-du: Add dependency on OF
drm: rcar-du: Remove obsolete rcar-du-r8a779x platform_device_id entries
Laurent Pinchart [Mon, 27 Jul 2015 08:42:54 +0000 (11:42 +0300)]
drm: rcar-du: Fix plane state free in plane reset handler
The plane reset handler frees the plane state and allocates a new
default state, but when doing so attempt to free the plane state using
the base plane state pointer instead of casting it to the
driver-specific state object that has been allocated. Fix it by using
the rcar_du_plane_atomic_destroy_state() function to destroy the plane
state instead of duplicating the code.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Laurent Pinchart [Tue, 28 Apr 2015 12:26:33 +0000 (15:26 +0300)]
drm: rcar-du: Enable DU0 to DPAD connection on R8A7791
The DPAD RGB output can be driven by both DU0 and DU1 on R8A7791. Mark
the DU0 connection as possible.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Laurent Pinchart [Thu, 16 Jul 2015 08:42:37 +0000 (11:42 +0300)]
drm: rcar-du: Add dependency on OF
The driver requires OF support, add a dependency in Kconfig and remove
the platform_device_id table that isn't used anymore.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Geert Uytterhoeven [Tue, 23 Jun 2015 12:58:52 +0000 (14:58 +0200)]
drm: rcar-du: Remove obsolete rcar-du-r8a779x platform_device_id entries
Since commit
a483dcbfa21f919c ("ARM: shmobile: lager: Remove legacy
board support"), R-Car Gen2 SoCs are only supported in generic DT-only
ARM multi-platform builds. The driver doesn't need to match platform
devices by name anymore, hence remove the corresponding
platform_device_id entry.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Daniel Vetter [Fri, 16 Oct 2015 17:11:30 +0000 (19:11 +0200)]
drm/fb-helper: Fix fb refcounting in pan_display_atomic
In
commit
bbb1e52402b2a288b09ae37e8182599931c7e9df
Author: Rob Clark <robdclark@gmail.com>
Date: Tue Aug 25 15:35:58 2015 -0400
drm/fb-helper: atomic restore_fbdev_mode()..
we've forgotten to do the plane->old_fb refcount dance for
pan_display_atomic, which can result in refcount leaks if the current
configuration is not from fbcon. Which apparently can happen when
vt-switching - fbcon does a pan first before a set_par.
OCD-align function parameters while at it.
v2: Actually git add the OCD.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92483
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1445015490-27682-1-git-send-email-daniel.vetter@ffwll.ch
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Fri, 16 Oct 2015 16:23:13 +0000 (18:23 +0200)]
drm/fb-helper: Set plane rotation directly
The point behind standardizing properties into core drm state
structures is also that internal code looks prettiers. Take advantage
of that and set rotation directly in the fbdev atomic code.
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1445012594-25988-1-git-send-email-daniel.vetter@ffwll.ch
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Adam Richter [Fri, 16 Oct 2015 10:33:02 +0000 (03:33 -0700)]
drm: fix mutex leak in drm_dp_get_mst_branch_device
In Linux 4.3-rc5, there is an error case in drm_dp_get_branch_device
that returns without releasing mgr->lock, resulting a spew of kernel
messages about a kernel work function possibly having leaked a mutex
and presumably more serious adverse consequences later. This patch
changes the error to "goto out" to unlock the mutex before returning.
Signed-off-by: Adam J. Richter <adam_richter2004@yahoo.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 15 Oct 2015 17:40:02 +0000 (20:40 +0300)]
drm: Check plane src coordinates correctly during page flip for atomic drivers
Instead of relying on the old crtc-{x,y,mode} gunk, dig out the primary
plane coordinates from the plane state when checking them against the
new framebuffer during page flip.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1444930802-8515-5-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 16 Oct 2015 15:38:39 +0000 (18:38 +0300)]
drm: Check crtc viewport correctly with rotated primary plane on atomic drivers
On atomic drivers we can dig out the primary plane rotation from the
plane state instead of looking at the legacy crtc->invert_dimensions
flag. The flag is not set by anyone except omapdrm, and it would be
racy to set it the same way in the atomic helpers.
v2: Kill crtc->invert_dimensions totally since omap is state based
already and no one else ever used it (Matt)
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1445009919-22746-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 15 Oct 2015 17:40:00 +0000 (20:40 +0300)]
drm: Refactor plane src coordinate checks
Pull the plane src coordinate checks into a separate function so that we
can share them for the legacy and new stuff.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1444930802-8515-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 15 Oct 2015 17:39:59 +0000 (20:39 +0300)]
drm: Swap w/h when converting the mode to src coordidates for a rotated primary plane
When converting the mode hdisplay/vdisplay to primary plane src
coordinates we need to take into account the current plane
rotation.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1444930802-8515-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 15 Oct 2015 17:39:58 +0000 (20:39 +0300)]
drm: Don't leak fb when plane crtc coodinates are bad
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Lukas Wunner [Fri, 4 Sep 2015 18:49:36 +0000 (20:49 +0200)]
ALSA: hda - Spell vga_switcheroo consistently
Currently everyone and their dog has their own favourite spelling
for vga_switcheroo. This makes it hard to grep dmesg for log entries
relating to vga_switcheroo. It also makes it hard to find related
source files in the tree.
vga_switcheroo.c uses pr_fmt "vga_switcheroo". Use that everywhere.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/9b0175319ce78d831acfcf11e4c6c760f826b0e3.1444663039.git.lukas@wunner.de
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 15 Oct 2015 09:33:43 +0000 (11:33 +0200)]
drm/gem: Use kref_get_unless_zero for the weak mmap references
Compared to wrapping the final kref_put with dev->struct_mutex this
allows us to only acquire the offset manager look both in the final
cleanup and in the lookup. Which has the upside that no locks leak out
of the core abstractions. But it means that we need to hold a
temporary reference to the object while checking mmap constraints, to
make sure the object doesn't disappear. Extended the critical region
would have worked too, but would result in more leaky locking.
Also, this is the final bit which required dev->struct_mutex in gem
core, now modern drivers can be completely struct_mutex free!
This needs a new drm_vma_offset_exact_lookup_locked and makes both
drm_vma_offset_exact_lookup and drm_vma_offset_lookup unused.
v2: Don't leak object references in failure paths (David).
v3: Add a comment from Chris explaining how the ordering works, with
the slight adjustment that I dropped any mention of struct_mutex since
with this patch it's now immaterial ot core gem.
Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://mid.gmane.org/1444901623-18918-1-git-send-email-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Thu, 15 Oct 2015 07:36:23 +0000 (09:36 +0200)]
drm/vgem: Drop vgem_drm_gem_mmap
It's duplicating (without using some of the helpers) drm_gem_mmap with
the addition that it can redirect to drm-buf mmap support. But prime
import/export was dropped in
commit
990ed2720717173bbdea4cfb2bad37cc7aa91495
Author: Rob Clark <robdclark@gmail.com>
Date: Thu May 21 11:58:30 2015 -0400
drm/vgem: drop DRIVER_PRIME (v2)
for now, so this is dead code. And since I want to rework the locking
for drm_gem_mmap it seems simpler to de-dupe this code for now and
then start over with the reworked one again, if we want to resurrect
this all indeed.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://mid.gmane.org/1444894601-5200-8-git-send-email-daniel.vetter@ffwll.ch
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Lukas Wunner [Thu, 15 Oct 2015 09:56:56 +0000 (11:56 +0200)]
drm: Fix return value of drm_framebuffer_init()
In its original version, drm_framebuffer_init() returned a negative int
if drm_mode_object_get() failed (
f453ba046074, "DRM: add mode setting
support").
This was accidentally disabled by commit
4b096ac10da0 ("drm: revamp
locking around fb creation/destruction"). Thus, drm_framebuffer_init()
pretends success if drm_mode_object_get() failed.
Reinstate the original behaviour. Also fix erroneous kernel-doc of
drm_mode_object_get().
Fixes:
4b096ac10da0 ("drm: revamp locking around fb creation/
destruction")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 15 Oct 2015 07:36:26 +0000 (09:36 +0200)]
drm/gem: Use container_of in drm_gem_object_free
Just a random thing I spotted while reading code - better safe than
sorry.
Link: http://mid.gmane.org/1444894601-5200-11-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Daniel Vetter [Thu, 15 Oct 2015 07:36:25 +0000 (09:36 +0200)]
drm/gem: Check locking in drm_gem_object_unreference
Pretty soon only some drivers will need dev->struct_mutex in their
gem_free_object callbacks. Hence it's really important to make sure
everything still keeps getting this right.
v2: Don't check for locking before we check for non-NULL obj. Spotted
by Dan Carpenter.
Link: http://mid.gmane.org/1444894601-5200-10-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Dave Airlie [Sun, 18 Oct 2015 21:16:15 +0000 (07:16 +1000)]
Merge branch 'virtio-gpu-for-drm-next' of git://git.kraxel.org/linux into drm-next
Add 3D support to the virtio-gpu.
* 'virtio-gpu-for-drm-next' of git://git.kraxel.org/linux:
virtio-gpu: add page flip support
virtio-gpu: mark as a render gpu
virtio-gpu: add basic prime support
virtio-gpu: add 3d/virgl support
virtio-gpu: don't free things on ttm_bo_init failure
virtio-gpu: wait for cursor updates finish
virtio-gpu: add & use virtio_gpu_queue_fenced_ctrl_buffer
virtio-gpu: add virtio_gpu_queue_ctrl_buffer_locked
Daniel Vetter [Thu, 15 Oct 2015 07:36:24 +0000 (09:36 +0200)]
drm/gem: Drop struct_mutex requirement from drm_gem_mmap_obj
Since
commit
131e663bd6f1055caaff128f9aa5071d227eeb72
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Thu Jul 9 23:32:33 2015 +0200
drm/gem: rip out drm vma accounting for gem mmaps
there is no need for this any more.
v2: Fixup compile noise spotted by 0-day build.
Link: http://mid.gmane.org/1444894601-5200-9-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Mikko Rapeli [Thu, 15 Oct 2015 05:55:51 +0000 (07:55 +0200)]
drm/i810_drm.h: include drm/drm.h
Fixes userspace compilation error:
error: array type has incomplete element type
struct drm_clip_rect boxes[I810_NR_SAREA_CLIPRECTS];
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mikko Rapeli [Thu, 15 Oct 2015 05:55:46 +0000 (07:55 +0200)]
r128_drm.h: include drm/drm.h
Fixes compile error:
drm/r128_drm.h:156:23: error: array type has incomplete element type
struct drm_clip_rect boxes[R128_NR_SAREA_CLIPRECTS];
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mikko Rapeli [Thu, 15 Oct 2015 05:55:49 +0000 (07:55 +0200)]
savage_drm.h: include <drm/drm.h>
Fixes compiler error:
drm/savage_drm.h:50:24: error: array type has incomplete element type
struct drm_tex_region texList[SAVAGE_NR_TEX_HEAPS][SAVAGE_NR_TEX_REGIONS +
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Lukas Wunner [Mon, 12 Oct 2015 07:10:33 +0000 (09:10 +0200)]
gpu/doc: Convert to markdown harder
This snippet...
* Lock VMA manager for extended lookups. Only *_locked() VMA function calls
* are allowed while holding this lock. All other contexts are blocked from VMA
* until the lock is released via drm_vma_offset_unlock_lookup().
...causes markdown-enabled kernel-doc to barf:
debian/build/build-doc/Documentation/DocBook/gpu.aux.xml:3247: parser error : Opening and ending tag mismatch: emphasis line 3247 and function
*<function><emphasis>locked</function> VMA function calls are allowed while
^
/root/airlied/debian/build/build-doc/Documentation/DocBook/gpu.aux.xml:3249: parser error : Opening and ending tag mismatch: function line 3249 and emphasis
released via <function>drm</emphasis>vma_offset_unlock_lookup</function>.
^
unable to parse /root/airlied/debian/build/build-doc/Documentation/DocBook/gpu.aux.xml
A quick workaround is to replace *_locked() by X_locked().
Cc: Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
[danvet: Just drop the X_ too, the usual style is _unlocked, except
that _ seems to be what annoys markdown.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Lukas Wunner [Sun, 11 Oct 2015 09:55:00 +0000 (11:55 +0200)]
gpu/doc: Add vga_switcheroo documentation
Requires Markdown support.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Lukas Wunner [Sun, 11 Oct 2015 09:26:26 +0000 (11:26 +0200)]
gpu/doc: Fix up remaining occurrences of old document title
Following Daniel's renaming of the document.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 7 Oct 2015 07:55:28 +0000 (09:55 +0200)]
drm/doc: Rename docbook to gpu.tmpl
DRM is a lot more than a direct rendering manager nowadays, and there's
also a bunch of things worth documenting for gpu driver developers
outside of drivers/gpu/drm, like vgaarb, vga_switcheroo or the various
hardware buses like host1x and ipu-v3.
To avoid further confusion let's rename the top-level to reflect
reality.
And yes I'm already looking forward to when we need to replace the G
in GPU with a * ;-)
Inspired by a thread with Lukas since he refused to include the
vga_switcheroo docs into the drm docs because it's not drm.
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
[Lukas: Drop BUG() easter egg in i915_gem_execbuffer.c spotted by Jani
and fix typos in commit message.]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Rob Clark [Tue, 13 Oct 2015 14:13:28 +0000 (10:13 -0400)]
drm: misc cleanup
Drop unused drm_atomic and fix comment for drm_debug.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Lukas Wunner [Fri, 28 Aug 2015 10:54:07 +0000 (12:54 +0200)]
vga_switcheroo: Use enum vga_switcheroo_client_id instead of int
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Lukas Wunner [Fri, 28 Aug 2015 11:30:32 +0000 (13:30 +0200)]
vga_switcheroo: Use VGA_SWITCHEROO_UNKNOWN_ID instead of -1
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Lukas Wunner [Fri, 28 Aug 2015 09:56:26 +0000 (11:56 +0200)]
vga_switcheroo: Use enum vga_switcheroo_state instead of int
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 9 Oct 2015 19:57:37 +0000 (22:57 +0300)]
drm: Add DRM_DEBUG_VBL()
Add a new debug class for _verbose_ debug message from the vblank code.
That is message we spew out potentially for every vblank interrupt.
Thierry already got annoyed at the spew, and now I managed to lock up
my box with these debug prints (seems serial console + a few debug
prints every vblank aren't a good combination).
Or should I maybe call it DRM_DEBUG_IRQ?
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 9 Oct 2015 19:57:36 +0000 (22:57 +0300)]
drm: Don't use '\' for string literal concatenation
String literals get concatenated just fine on their own,
no need to use '\'.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 8 Sep 2015 11:56:30 +0000 (13:56 +0200)]
drm/<drivers>: Drop DRM_UNLOCKED from modeset drivers
Just one special case (since i915 lost its ums code, yay):
- radeon: Has slots for the old ums ioctls which don't have
DRM_UNLOCKED, but all filled with drm_invalid_op. So ok to drop it
everywhere.
Every other kms driver just has DRM_UNLOCKED for all their ioctls, as
they should.
v2: admgpu happened, include that one too. And i915 lost its UMS
support which means we can change all the i915 ioctls too.
v3: Rebased on top of new vmwgfx DX interface extensions.
v4: Rebase on top of render-node support in exynos.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Mon, 28 Sep 2015 19:42:40 +0000 (21:42 +0200)]
drm: Enforce unlocked ioctl operation for kms driver ioctls
With the prep patches for i915 all kms drivers either have
DRM_UNLOCKED on all their ioctls. Or the ioctl always directly returns
with an invariant return value when in modeset mode. But that's only
the case for i915 and radeon. The drm core ioctls are unfortunately
too much a mess still to dare this.
Follow-up patches will remove DRM_UNLOCKED from all kms drivers to
prove that this is indeed the case.
Also update the documentation.
v2: Really only do this for driver ioctls, spotted by David Herrmann.
And drop spurious whitespace change.
Cc: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 8 Sep 2015 11:56:25 +0000 (13:56 +0200)]
drm/i915: Mark getparam ioctl as DRM_UNLOCKED
With kms all the data getparam looks at is actually invariant, and
certainly not protected by the global kms mutex. With ums all the
setup code is already racy as hell, so this won't make things any
worse.
I've done this change so that all ioctl still used by kms drivers
are marked as DRM_UNLOCKED, besides that we obviously don't need
it any more in kms mode.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Gerd Hoffmann [Wed, 23 Sep 2015 10:19:11 +0000 (12:19 +0200)]
virtio-gpu: add page flip support
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Dave Airlie [Tue, 16 Jun 2015 05:41:56 +0000 (15:41 +1000)]
virtio-gpu: mark as a render gpu
Also add DRM_RENDER_ALLOW to the ioctls.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Dave Airlie [Fri, 23 Jan 2015 03:04:11 +0000 (13:04 +1000)]
virtio-gpu: add basic prime support
This is enough to enable DRI3.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Tue, 28 Oct 2014 11:48:00 +0000 (12:48 +0100)]
virtio-gpu: add 3d/virgl support
Add the bits needed for opengl rendering support: query
capabilities, new virtio commands, drm ioctls.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Dave Airlie [Tue, 13 Oct 2015 06:55:48 +0000 (16:55 +1000)]
virtio-gpu: don't free things on ttm_bo_init failure
ttm_bo_init will call the destroy callback which will do all
this, this was causing a double free.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Gerd Hoffmann [Tue, 15 Sep 2015 06:20:46 +0000 (08:20 +0200)]
virtio-gpu: wait for cursor updates finish
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 19 Aug 2015 21:44:15 +0000 (23:44 +0200)]
virtio-gpu: add & use virtio_gpu_queue_fenced_ctrl_buffer
Add helper function to handle the submission of fenced control requests.
Make sure we initialize the fence while holding the virtqueue lock, so
requests can't be reordered.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Gerd Hoffmann [Wed, 19 Aug 2015 21:35:57 +0000 (23:35 +0200)]
virtio-gpu: add virtio_gpu_queue_ctrl_buffer_locked
Add virtio_gpu_queue_ctrl_buffer_locked function, which does the same as
virtio_gpu_queue_ctrl_buffer but does not take the virtqueue lock. The
caller must hold the lock instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Mikko Rapeli [Thu, 15 Oct 2015 05:55:48 +0000 (07:55 +0200)]
via_drm.h: move struct via_file_private definition to drivers/gpu/drm/via/via_drv.h
Fixes userspace compile error since list_head is not exported to userspace
headers.
Suggested by Emil Velikov <emil.l.velikov@gmail.com> at
https://lkml.org/lkml/2015/6/3/792
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mikko Rapeli [Thu, 15 Oct 2015 05:55:50 +0000 (07:55 +0200)]
include/uapi/drm/sis_drm.h: move sis_file_private to drivers/gpu/drm/sis/sis_drv.h
Fixes userspace compile error:
drm/sis_drm.h:68:19: error: field ‘obj_list’ has incomplete type
struct list_head obj_list;
Suggested by Emil Velikov <emil.l.velikov@gmail.com> at
https://lkml.org/lkml/2015/6/3/792
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 16 Oct 2015 00:25:49 +0000 (10:25 +1000)]
Merge branch 'drm-dwhdmi-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into drm-next
This series:
* adds support for interlaced video modes to the ipu-v3 driver
and dw_hdmi bridge.
* reworks the dw_hdmi connector enable/disable support, to ensure that
when DRM disables the output, it stays disabled irrespective of the
hotplug state.
* adds support for connector forcing, so we can force the hotplug state
for this connector.
* adds the ALSA AHB audio driver to the bridge: Iwai has acked the
audio driver.
* a few fixes to the ACR calculations to allow more modes to work with
audio on iMX6.
Fabio has independently tested this series, so all patches here carry
his tested-by tag.
* 'drm-dwhdmi-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm: bridge/dw_hdmi: replace CTS calculation for the ACR
drm: bridge/dw_hdmi: remove ratio support from ACR code
drm: bridge/dw_hdmi: adjust pixel clock values in N calculation
drm: bridge/dw_hdmi: avoid being recursive in N calculation
drm: bridge/dw_hdmi-ahb-audio: allow larger buffer sizes
drm: bridge/dw_hdmi-ahb-audio: basic support for multi-channel PCM audio
drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver
drm: bridge/dw_hdmi-ahb-audio: add audio driver
drm: bridge/dw_hdmi: improve HDMI enable/disable handling
drm: bridge/dw_hdmi: add connector mode forcing
drm: bridge/dw_hdmi: add support for interlaced video modes
gpu: imx: fix support for interlaced modes
gpu: imx: simplify sync polarity setting
Dave Airlie [Fri, 16 Oct 2015 00:10:32 +0000 (10:10 +1000)]
Merge commit '
06d1ee32a4d25356a710b49d5e95dbdd68bdf505' of git://git./linux/kernel/git/torvalds/linux into drm-next
Backmerge the drm-fixes pull from Linus's tree into drm-next.
This is to fix some conflicts and make future pulls cleaner
Dave Airlie [Fri, 16 Oct 2015 00:02:35 +0000 (10:02 +1000)]
Merge tag 'topic/drm-misc-2015-10-08' of git://anongit.freedesktop.org/drm-intel into drm-next
Another round of drm-misc. Unfortunately the DRM_UNLOCKED removal for
DRIVER_MODESET isn't complete yet for lack of review on 1-2 patches.
Otherwise just various stuff all over.
* tag 'topic/drm-misc-2015-10-08' of git://anongit.freedesktop.org/drm-intel:
drm: Stop using drm_vblank_count() as the hw frame counter
drm/irq: Use unsigned int pipe in public API
drm: Use DRM_ROTATE_MASK and DRM_REFLECT_MASK
drm: Add DRM_ROTATE_MASK and DRM_REFLECT_MASK
vga_switcheroo: Add missing locking
vgaarb: use kzalloc in vga_arbiter_add_pci_device()
drm: Don't zero vblank timestamps from the irq handler
drm: Hack around CONFIG_AGP=m build failures
drm/i915: Remove setparam ioctl
drm: Remove dummy agp ioctl wrappers
drm/vmwgfx: Stop checking for DRM_UNLOCKED
drm/drm_ioctl.c: kerneldoc
drm: Define a drm_invalid_op ioctl implementation
drm: Remove __OS_HAS_AGP
drm/doc: Update docs about device instance setup
Dave Airlie [Thu, 15 Oct 2015 23:59:19 +0000 (09:59 +1000)]
Merge tag 'drm-intel-next-2015-09-28-merged' of git://anongit.freedesktop.org/drm-intel into drm-next
drm-intel-next-2015-09-28:
- fastboot by default for some systems (Maarten Lankhorts)
- piles of workarounds for bxt and skl
- more fbc work from Paulo
- fix hdmi hotplug detection (Sonika)
- first few patches from Ville to parametrize register macros, prep work for
typesafe mmio functions
- prep work for nv12 rotation (Tvrtko Ursulin)
- various other bugfixes and improvements all over
I have another backmerge here since things became messy and I didn't
realize you resolved some of them already (usually you complain when
there's a conflict ...).
For 4.4 I plan one more feature round after this and then that's it.
* tag 'drm-intel-next-2015-09-28-merged' of git://anongit.freedesktop.org/drm-intel: (80 commits)
drm/i915: Update DRIVER_DATE to
20150928
drm/i915: fix task reference leak in i915_debugfs.c
drm/i915: Defer adding preallocated stolen objects to the VM list
drm/i915: Remove extraneous request cancel.
drm/i915: Enable querying offset of UV plane with intel_plane_obj_offset
drm/i915: Support NV12 in rotated GGTT mapping
drm/i915: Support appending to the rotated pages mapping
drm/i915: Support planar formats in tile height calculations
drm/i915/bxt: Update revision id for BXT C0
drm/i915: Parametrize CSR_PROGRAM registers
drm/i915: Parametrize DDI_BUF_TRANS registers
drm/i915: Parametrize TV luma/chroma filter registers
drm/i915: Replace raw numbers with the approproate register name in ILK turbo code
drm/i915: Parametrize ILK turbo registers
drm/i915: Parametrize FBC_TAG registers
drm/i915: Parametrize GEN7_GT_SCRATCH and GEN7_LRA_LIMITS
drm/i915: Parametrize LRC registers
drm/i915: Don't pass sdvo_reg to intel_sdvo_select_{ddc, i2c}_bus()
drm/i915: Ignore "digital output" and "not HDMI output" bits for eDP detection
drm/i915: Make sure we don't detect eDP on g4x
...
Dave Airlie [Thu, 15 Oct 2015 23:39:14 +0000 (09:39 +1000)]
Merge branch 'drm-next-4.4' of git://people.freedesktop.org/~agd5f/linux into drm-next
This is the first radeon and amdgpu pull for drm-next. Highlights include:
- Efficiency improvements to the CS checker for pre-SI asics
- Cursor fixes ported from radeon to amdgpu
- Enable GPU scheduler by default
- Add a bunch of GPUVM debugging options
- Add support for some new atombios opcodes
- Misc cleanups and fixes
* 'drm-next-4.4' of git://people.freedesktop.org/~agd5f/linux: (42 commits)
drm/amdgpu: fix lockup when clean pending fences
drm/amdgpu: add timer to fence to detect scheduler lockup
drm/amdgpu: add VM CS mapping trace point
drm/amdgpu: add option to clear VM page tables after every submit
drm/amdgpu: add option to stop on VM fault
drm/amdgpu: only print meaningful VM faults
drm/amdgpu: also trace already allocated VMIDs
drm/amdgpu: Drop unnecessary #include <linux/vga_switcheroo.h>
drm/radeon: Drop unnecessary #include <linux/vga_switcheroo.h>
drm/amdgpu: clean up pageflip interrupt handling
drm/amdgpu: rework sdma structures
drm/amdgpu: unpin cursor BOs on suspend and pin them again on resume
drm/amdgpu/dce8: Fold set_cursor() into show_cursor()
drm/amdgpu/dce8: Clean up reference counting and pinning of the cursor BOs
drm/amdgpu/dce8: Move hotspot handling out of set_cursor
drm/amdgpu/dce8: Re-show the cursor after a modeset (v2)
drm/amdgpu/dce8: Use cursor_set2 hook for enabling / disabling the HW cursor
drm/amdgpu/dce11: Fold set_cursor() into show_cursor()
drm/amdgpu/dce11: Clean up reference counting and pinning of the cursor BOs
drm/amdgpu/dce11: Move hotspot handling out of set_cursor
...
Dave Airlie [Thu, 15 Oct 2015 04:17:13 +0000 (14:17 +1000)]
Merge branch 'drm-tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into drm-next
* removes the now unused DRM slave encoder support, which all users have
migrated away from, allowing us to simplify the code.
* ensure all pending interrupts are processed together, rather than
needing the handler to be re-entered each time.
* use more HDMI helpers to setup the info frames.
* fix EDID read handling by ensuring that we always wait the specified time
before attempting to read the EDID, no matter where the EDID read request
came from.
* 'drm-tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm/i2c: tda998x: clean up after struct tda998x_priv2 removal
drm/i2c: tda998x: kill struct tda998x_priv2
drm/i2c: tda998x: move connector into struct tda998x_priv
drm/i2c: tda998x: remove encoder pointer
drm/i2c: tda998x: remove DRM slave encoder support
drm/i2c: tda998x: use more HDMI helpers
drm/i2c: tda998x: handle all outstanding interrupts
drm/i2c: tda998x: convert to u8/u16/u32 types
drm/i2c: tda998x: re-implement "Fix EDID read timeout on HDMI connect"
drm/i2c: tda998x: report whether we actually handled the IRQ
drm/i2c: tda998x: remove useless NULL checks
Dave Airlie [Thu, 15 Oct 2015 04:02:47 +0000 (14:02 +1000)]
Merge branch 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into drm-next
* remove support for the non-component support from the Armada DRM driver,
switching it to component-only mode.
* create a "armada plane" to allow the primary and overlay planes to share
some code.
* increase efficiency by using inherently atomic operations, rather than
spinlocking to achieve atomicity. Eg, if we want to exchange a value,
using xchg().
* increase PM savings by stopping the external pixel clock when we're in
DPMS mode.
* 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm/armada: move frame wait wakeup into plane work
drm/armada: convert overlay plane vbl worker to a armada plane worker
drm/armada: move CRTC flip work to primary plane work
drm/armada: move frame wait into armada_frame
drm/armada: move the locking for armada_drm_vbl_event_remove()
drm/armada: move the update of dplane->ctrl0 out of spinlock
drm/armada: move write to dma_ctrl0 to armada_drm_crtc_plane_disable()
drm/armada: provide a common helper to disable a plane
drm/armada: allocate primary plane ourselves
drm/armada: add primary plane creation
drm/armada: introduce generic armada_plane struct
drm/armada: update armada overlay to use drm_universal_plane_init()
drm/armada: use xchg() to atomically update dplane->old_fb
drm/armada: factor out retirement of old fb
drm/armada: rename overlay identifiers
drm/armada: redo locking and atomics for armada_drm_crtc_complete_frame_work()
drm/armada: disable CRTC clock during DPMS
drm/armada: use drm_plane_force_disable() to disable the overlay plane
drm/armada: move vbl code into armada_crtc
drm/armada: remove non-component support
Junwei Zhang [Tue, 13 Oct 2015 03:14:23 +0000 (11:14 +0800)]
drm/amdgpu: fix lockup when clean pending fences
The first lockup fence will lock the fence list of scheduler.
Then cancel the delayed workqueues for all clean pending fences
without waiting the workqueues to finish.
Change-Id: I9bec826de1aa49d587b0662f3fb4a95333979429
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Junwei Zhang [Sat, 10 Oct 2015 00:48:42 +0000 (08:48 +0800)]
drm/amdgpu: add timer to fence to detect scheduler lockup
Change-Id: I67e987db0efdca28faa80b332b75571192130d33
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: David Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Christian König [Mon, 28 Sep 2015 10:00:23 +0000 (12:00 +0200)]
drm/amdgpu: add VM CS mapping trace point
Output all VM mappings a command submission uses.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 10 Sep 2015 12:00:35 +0000 (14:00 +0200)]
drm/amdgpu: add option to clear VM page tables after every submit
This makes it much easier to find when userspace misses to send some buffers.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 28 Sep 2015 10:31:26 +0000 (12:31 +0200)]
drm/amdgpu: add option to stop on VM fault
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Thu, 10 Sep 2015 13:00:39 +0000 (15:00 +0200)]
drm/amdgpu: only print meaningful VM faults
Port of radeon commit
9b7d786b900baf7c0d1a7e211570aef1cb27590f.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 28 Sep 2015 10:01:20 +0000 (12:01 +0200)]
drm/amdgpu: also trace already allocated VMIDs
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Lukas Wunner [Mon, 12 Oct 2015 09:54:18 +0000 (11:54 +0200)]
drm/amdgpu: Drop unnecessary #include <linux/vga_switcheroo.h>
This was added to two radeon files even though they don't use any
vga_switcheroo symbols, the amdgpu fork inherited them:
Added to amdgpu_acpi.c by commit
d7a2952f1ade ("drm/radeon: Add
support for the ATIF ACPI method to the radeon driver").
Added to amdgpu_bios.c by commit
6a9ee8af344e ("vga_switcheroo:
initial implementation (v15)").
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lukas Wunner [Mon, 12 Oct 2015 09:15:17 +0000 (11:15 +0200)]
drm/radeon: Drop unnecessary #include <linux/vga_switcheroo.h>
This was added to three files even though they don't use any
vga_switcheroo symbols:
Added to radeon_acpi.c by commit
d7a2952f1ade ("drm/radeon: Add
support for the ATIF ACPI method to the radeon driver").
Added to radeon_asic.c by commit
0a10c85129c2 ("drm/radeon: create
radeon_asic.c").
Added to radeon_bios.c by commit
6a9ee8af344e ("vga_switcheroo:
initial implementation (v15)").
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 9 Oct 2015 15:38:49 +0000 (11:38 -0400)]
drm/amdgpu: clean up pageflip interrupt handling
Check to make sure we aren't touching a non-existent
display controller and simplify the code.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 8 Oct 2015 20:30:37 +0000 (16:30 -0400)]
drm/amdgpu: rework sdma structures
Rework the sdma structures in the driver to
consolidate all of the sdma info into a single
structure and allow for asics that may have
different numbers of sdma instances.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 8 Oct 2015 04:03:36 +0000 (00:03 -0400)]
drm/amdgpu: unpin cursor BOs on suspend and pin them again on resume
Everything is evicted from VRAM before suspend, so we need to make
sure all BOs are unpinned and re-pinned after resume. Fixes broken
mouse cursor after resume introduced by commit
b9729b17.
Port of radeon commit:
f3cbb17bcf676a2fc6aedebe9fbebd59e550c51a
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 8 Oct 2015 03:46:49 +0000 (23:46 -0400)]
drm/amdgpu/dce8: Fold set_cursor() into show_cursor()
Port of radeon commit:
8991668ab4e26f985a8485719bce5d6d0623a644
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 8 Oct 2015 15:31:58 +0000 (11:31 -0400)]
drm/amdgpu/dce8: Clean up reference counting and pinning of the cursor BOs
Take a GEM reference for and pin the new cursor BO, unpin and drop the
GEM reference for the old cursor BO in dce8 crtc_cursor_set2, and use
amdgpu_crtc->cursor_addr in dce8 set_cursor.
This fixes dce8 cursor_reset accidentally incrementing the cursor BO
pin count, and cleans up the code a little.
Port of radeon commit:
cd404af0c930104462aa91344f07d002cf8248ed
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 8 Oct 2015 03:38:03 +0000 (23:38 -0400)]
drm/amdgpu/dce8: Move hotspot handling out of set_cursor
It's only needed in dce8 crtc_cursor_set2.
Port of radeon commit:
2e007e611bc0a46dfed1547e0228a57f800e703d
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / log