GitHub/LineageOS/android_kernel_motorola_exynos9610.git
11 years agodriver: net: ethernet: cpsw: dual emac interface implementation
Mugunthan V N [Mon, 11 Feb 2013 09:52:20 +0000 (09:52 +0000)]
driver: net: ethernet: cpsw: dual emac interface implementation

The CPSW switch can act as Dual EMAC by segregating the switch ports
using VLAN and port VLAN as per the TRM description in
14.3.2.10.2 Dual Mac Mode

Following CPSW components will be common for both the interfaces.
* Interrupt source is common for both eth interfaces
* Interrupt pacing is common for both interfaces
* Hardware statistics is common for all the ports
* CPDMA is common for both eth interface
* CPTS is common for both the interface and it should not be enabled on
  both the interface as timestamping information doesn't contain port
  information.

Constrains
* Reserved VID of One port should not be used in other interface which will
  enable switching functionality
* Same VID must not be used in both the interface which will enable switching
  functionality

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agodriver: net: ethernet: cpsw: make cpts as pointer
Mugunthan V N [Mon, 11 Feb 2013 09:52:19 +0000 (09:52 +0000)]
driver: net: ethernet: cpsw: make cpts as pointer

As CPTS is common module for both EMAC in Dual EMAC mode so making cpts as
pointer.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agodriver: net: ethernet: davinci_cpdma: add support for directed packet and source...
Mugunthan V N [Mon, 11 Feb 2013 09:52:18 +0000 (09:52 +0000)]
driver: net: ethernet: davinci_cpdma: add support for directed packet and source port detection

* Introduced parameter to add port number for directed packet in cpdma_chan_submit
* Source port detection macro with DMA descriptor status

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: sctp: remove unused multiple cookie keys
Daniel Borkmann [Tue, 12 Feb 2013 05:15:33 +0000 (05:15 +0000)]
net: sctp: remove unused multiple cookie keys

Vlad says: The whole multiple cookie keys code is completely unused
and has been all this time. Noone uses anything other then the
secret_key[0] since there is no changeover support anywhere.

Thus, for now clean up its left-over fragments.

Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonetpoll: cleanup sparse warnings
Neil Horman [Mon, 11 Feb 2013 10:25:31 +0000 (10:25 +0000)]
netpoll: cleanup sparse warnings

With my recent commit I introduced two sparse warnings.  Looking closer there
were a few more in the same file, so I fixed them all up.  Basic rcu pointer
dereferencing suff.

I've validated these changes using CONFIG_PROVE_RCU while starting and stopping
netconsole repeatedly in bonded and non-bonded configurations

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: fengguang.wu@intel.com
CC: David Miller <davem@davemloft.net>
CC: eric.dumazet@gmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonetpoll: Fix __netpoll_rcu_free so that it can hold the rtnl lock
Neil Horman [Mon, 11 Feb 2013 10:25:30 +0000 (10:25 +0000)]
netpoll: Fix __netpoll_rcu_free so that it can hold the rtnl lock

__netpoll_rcu_free is used to free netpoll structures when the rtnl_lock is
already held.  The mechanism is used to asynchronously call __netpoll_cleanup
outside of the holding of the rtnl_lock, so as to avoid deadlock.
Unfortunately, __netpoll_cleanup modifies pointers (dev->np), which means the
rtnl_lock must be held while calling it.  Further, it cannot be held, because
rcu callbacks may be issued in softirq contexts, which cannot sleep.

Fix this by converting the rcu callback to a work queue that is guaranteed to
get scheduled in process context, so that we can hold the rtnl properly while
calling __netpoll_cleanup

Tested successfully by myself.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
CC: Cong Wang <amwang@redhat.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoskbuff: create skb_panic() function and its wrappers
Jean Sacren [Mon, 11 Feb 2013 13:30:38 +0000 (13:30 +0000)]
skbuff: create skb_panic() function and its wrappers

Create skb_panic() function in lieu of both skb_over_panic() and
skb_under_panic() so that code duplication would be avoided. Update type
and variable name where necessary.

Jiri Pirko suggested using wrappers so that we would be able to keep the
fruits of the original code.

Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agomrp: make mrp_rcv static
Stephen Hemminger [Mon, 11 Feb 2013 06:25:24 +0000 (06:25 +0000)]
mrp: make mrp_rcv static

Sparse spotted local function that could be static.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoethtool: fix sparse warning
Stephen Hemminger [Mon, 11 Feb 2013 06:22:28 +0000 (06:22 +0000)]
ethtool: fix sparse warning

Fixes sparse complaints about dropping __user in casts.
 warning: cast removes address space of expression

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobridge: use dev->addr_assign_type to see if user change mac
Jiri Pirko [Sun, 10 Feb 2013 11:41:01 +0000 (11:41 +0000)]
bridge: use dev->addr_assign_type to see if user change mac

And remove no longer used br->flags.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoipv6: by default join ff01::1 and in case of forwarding ff01::2 and ff05:2
Hannes Frederic Sowa [Sun, 10 Feb 2013 03:50:18 +0000 (03:50 +0000)]
ipv6: by default join ff01::1 and in case of forwarding ff01::2 and ff05:2

Cc: Erik Hugne <erik.hugne@ericsson.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoipv6: don't accept multicast traffic with scope 0
Hannes Frederic Sowa [Sun, 10 Feb 2013 05:35:22 +0000 (05:35 +0000)]
ipv6: don't accept multicast traffic with scope 0

v2:
a) moved before multicast source address check
b) changed comment to netdev style

Cc: Erik Hugne <erik.hugne@ericsson.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoipv6: don't let node/interface scoped multicast traffic escape on the wire
Hannes Frederic Sowa [Sun, 10 Feb 2013 02:33:35 +0000 (02:33 +0000)]
ipv6: don't let node/interface scoped multicast traffic escape on the wire

Reported-by: Erik Hugne <erik.hugne@ericsson.com>
Cc: Erik Hugne <erik.hugne@ericsson.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: fix mailbox response handling
Jitendra Kalsaria [Sat, 9 Feb 2013 09:29:55 +0000 (09:29 +0000)]
qlcnic: fix mailbox response handling

o Do not read mailbox registers on timeout
o Add a helper function to handle mailbox response

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: enhance MSIX allocation failure log message
Manish Chopra [Sat, 9 Feb 2013 09:29:54 +0000 (09:29 +0000)]
qlcnic: enhance MSIX allocation failure log message

Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: fix async event handling during diagnostic loopback test
Jitendra Kalsaria [Sat, 9 Feb 2013 09:29:53 +0000 (09:29 +0000)]
qlcnic: fix async event handling during diagnostic loopback test

o Handle async events during diagnostic loopback test
o Clear loopback mode on failure to receive async events

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: refactor 83xx diagnostic IRQ test
Jitendra Kalsaria [Sat, 9 Feb 2013 09:29:52 +0000 (09:29 +0000)]
qlcnic: refactor 83xx diagnostic IRQ test

Cleanly separate 83xx diagnostic IRQ test from 82xx

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: refactor 83xx diagnostic loopback test
Jitendra Kalsaria [Sat, 9 Feb 2013 09:29:51 +0000 (09:29 +0000)]
qlcnic: refactor 83xx diagnostic loopback test

Cleanly separate 83xx diagnostic loopback test routines from 82xx

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: helper routine to handle async events
Jitendra Kalsaria [Sat, 9 Feb 2013 09:29:50 +0000 (09:29 +0000)]
qlcnic: helper routine to handle async events

Create a helper routine to handle async events, as it is being called
from multiple places

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: fix firmware based IDC participation
Jitendra Kalsaria [Sat, 9 Feb 2013 09:29:49 +0000 (09:29 +0000)]
qlcnic: fix firmware based IDC participation

Driver needs to stop participating in firmware based Inter Driver
Communication (IDC) while unloading driver

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoqlcnic: fix initialize NIC mailbox command
Himanshu Madhani [Sat, 9 Feb 2013 09:29:48 +0000 (09:29 +0000)]
qlcnic: fix initialize NIC mailbox command

Register for firmware based Inter Driver Communication (IDC) using initialize
NIC as the first mailbox command

Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet neighbour, decnet: Ensure to align device private data on preferred alignment.
YOSHIFUJI Hideaki / 吉藤英明 [Sat, 9 Feb 2013 07:00:59 +0000 (07:00 +0000)]
net neighbour, decnet: Ensure to align device private data on preferred alignment.

To allow both of protocol-specific data and device-specific data
attached with neighbour entry, and to eliminate size calculation
cost when allocating entry, sizeof protocol-speicic data must be
multiple of NEIGH_PRIV_ALIGN.  On 64bit archs,
sizeof(struct dn_neigh) is multiple of NEIGH_PRIV_ALIGN, but on
32bit archs, it was not.

Introduce NEIGH_ENTRY_SPACE() macro to ensure that protocol-specific
entry-size meets our requirement.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoipv6 mcast: Do not join device multicast for interface-local multicasts.
YOSHIFUJI Hideaki / 吉藤英明 [Sat, 9 Feb 2013 04:29:58 +0000 (04:29 +0000)]
ipv6 mcast: Do not join device multicast for interface-local multicasts.

RFC4291 (IPv6 addressing architecture) says that interface-Local scope
spans only a single interface on a node.  We should not join L2 device
multicast list for addresses in interface-local (or smaller) scope.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoveth: fix NULL dereference in veth_dellink()
Eric Dumazet [Fri, 8 Feb 2013 20:10:49 +0000 (20:10 +0000)]
veth: fix NULL dereference in veth_dellink()

commit d0e2c55e7c940 (veth: avoid a NULL deref in veth_stats_one)
added another NULL deref in veth_dellink().

# ip link add name veth1 type veth peer name veth0
# rmmod veth

We crash because veth_dellink() is called twice, so we must
take care of NULL peer.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'mvrp'
David S. Miller [Mon, 11 Feb 2013 01:37:27 +0000 (20:37 -0500)]
Merge branch 'mvrp'

David Ward says:

====================
The Linux kernel currently implements the GARP VLAN Registration
Protocol (GVRP) from IEEE 802.1Q-1998 (applicant-only participant).
When the GVRP flag is set for a VLAN interface on a Linux host, the
host advertises its membership in the VLAN to the attached bridge/
switch, so that it is not necessary to manually configure the bridge/
switch port to participate in the VLAN.

GVRP has been superseded by the Multiple VLAN Registration Protocol
(MVRP) in IEEE 802.1Q-2011, which addresses scalability concerns about
the earlier protocol.  The following patches add support for MVRP to
the Linux kernel and iproute2 utility. They are based largely off of
the existing implementation of GVRP, but have been modified for the
new PDU structure and state machine.

This implementation was tested with two Juniper EX4200 switches.
====================

Signed-off-by: David Ward <david.ward@ll.mit.edu>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/8021q: Implement Multiple VLAN Registration Protocol (MVRP)
David Ward [Fri, 8 Feb 2013 17:17:07 +0000 (17:17 +0000)]
net/8021q: Implement Multiple VLAN Registration Protocol (MVRP)

Initial implementation of the Multiple VLAN Registration Protocol
(MVRP) from IEEE 802.1Q-2011, based on the existing implementation
of the GARP VLAN Registration Protocol (GVRP).

Signed-off-by: David Ward <david.ward@ll.mit.edu>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/802: Implement Multiple Registration Protocol (MRP)
David Ward [Fri, 8 Feb 2013 17:17:06 +0000 (17:17 +0000)]
net/802: Implement Multiple Registration Protocol (MRP)

Initial implementation of the Multiple Registration Protocol (MRP)
from IEEE 802.1Q-2011, based on the existing implementation of the
Generic Attribute Registration Protocol (GARP).

Signed-off-by: David Ward <david.ward@ll.mit.edu>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'vsock'
David S. Miller [Mon, 11 Feb 2013 01:10:10 +0000 (20:10 -0500)]
Merge branch 'vsock'

Andy King says:

====================
In an effort to improve the out-of-the-box experience with Linux kernels for
VMware users, VMware is working on readying the VM Sockets (VSOCK, formerly
VMCI Sockets) (vsock) kernel module for inclusion in the Linux kernel. The
purpose of this post is to acquire feedback on the vsock kernel module.

Unlike previous submissions, where the new socket family was entirely reliant
on VMware's VMCI PCI device (and thus VMware's hypervisor), VM Sockets is now
completely[1] separated out into two parts, each in its own module:

o Core socket code, which is transport-neutral and invokes transport
  callbacks to communicate with the hypervisor.  This is vsock.ko.
o A VMCI transport, which communicates over VMCI with the VMware hypervisor.
  This is vmw_vsock_vmci_transport.ko, and it registers with the core module
  as a transport.

This should provide a path to introducing additional transports, for example
virtio, with the ultimate goal being to make this new socket family
hypervisor-neutral.

[1] If Gerd tries it and determines this to be false (still), I'll ship him
    a keg of beer.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoVSOCK: Introduce VM Sockets
Andy King [Wed, 6 Feb 2013 14:23:56 +0000 (14:23 +0000)]
VSOCK: Introduce VM Sockets

VM Sockets allows communication between virtual machines and the hypervisor.
User level applications both in a virtual machine and on the host can use the
VM Sockets API, which facilitates fast and efficient communication between
guest virtual machines and their host.  A socket address family, designed to be
compatible with UDP and TCP at the interface level, is provided.

Today, VM Sockets is used by various VMware Tools components inside the guest
for zero-config, network-less access to VMware host services.  In addition to
this, VMware's users are using VM Sockets for various applications, where
network access of the virtual machine is restricted or non-existent.  Examples
of this are VMs communicating with device proxies for proprietary hardware
running as host applications and automated testing of applications running
within virtual machines.

The VMware VM Sockets are similar to other socket types, like Berkeley UNIX
socket interface.  The VM Sockets module supports both connection-oriented
stream sockets like TCP, and connectionless datagram sockets like UDP. The VM
Sockets protocol family is defined as "AF_VSOCK" and the socket operations
split for SOCK_DGRAM and SOCK_STREAM.

For additional information about the use of VM Sockets, please refer to the
VM Sockets Programming Guide available at:

https://www.vmware.com/support/developer/vmci-sdk/

Signed-off-by: George Zhang <georgezhang@vmware.com>
Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Andy king <acking@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
David S. Miller [Fri, 8 Feb 2013 23:02:14 +0000 (18:02 -0500)]
Merge git://git./linux/kernel/git/davem/net

Synchronize with 'net' in order to sort out some l2tp, wireless, and
ipv6 GRE fixes that will be built on top of in 'net-next'.

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agocxgb4vf: Fix extraction of cpl_rx_pkt from the response queue descriptor
Vipul Pandya [Fri, 8 Feb 2013 02:49:51 +0000 (02:49 +0000)]
cxgb4vf: Fix extraction of cpl_rx_pkt from the response queue descriptor

This was preventing GRO and RxCheckSum offload to happen.

Signed-off-by: Jay Hernandez <jay@chelsio.com>
Signed-off-by: Vipul Pandya <vipul@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: sctp: sctp_auth_make_key_vector: use sctp_auth_create_key
Daniel Borkmann [Thu, 7 Feb 2013 23:22:58 +0000 (23:22 +0000)]
net: sctp: sctp_auth_make_key_vector: use sctp_auth_create_key

In sctp_auth_make_key_vector, we allocate a temporary sctp_auth_bytes
structure with kmalloc instead of the sctp_auth_create_key allocator.
Change this to sctp_auth_create_key as it is the case everywhere else,
so that we also can properly free it via sctp_auth_key_put. This makes
it easier for future code changes in the structure and allocator itself,
since a single API is consistently used for this purpose. Also, by
using sctp_auth_create_key we're doing sanity checks over the arguments.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agomacvlan: add a salt to mc_hash()
Eric Dumazet [Thu, 7 Feb 2013 16:41:02 +0000 (16:41 +0000)]
macvlan: add a salt to mc_hash()

Some multicast addresses are common to all macvlans,
so if a multicast message has a hash value collision, we
have to deliver a copy to all macvlans, adding significant
latency and possible packet drops if netdev_max_backlog
limit is hit.

Having a per macvlan hash function permits to reduce the
impact of hash collisions.

Suggested-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agomacvlan: broadcast addr should be part of mc_filter
Eric Dumazet [Thu, 7 Feb 2013 16:02:57 +0000 (16:02 +0000)]
macvlan: broadcast addr should be part of mc_filter

commit cd431e738509e (macvlan: add multicast filter) forgot
the broadcast case.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
SIgned-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoipv6: fix a RCU warning in net/ipv6/ip6_flowlabel.c
Amerigo Wang [Thu, 7 Feb 2013 15:52:40 +0000 (15:52 +0000)]
ipv6: fix a RCU warning in net/ipv6/ip6_flowlabel.c

This patch fixes the following RCU warning:

[   51.680236] ===============================
[   51.681914] [ INFO: suspicious RCU usage. ]
[   51.683610] 3.8.0-rc6-next-20130206-sasha-00028-g83214f7-dirty #276 Tainted: G        W
[   51.686703] -------------------------------
[   51.688281] net/ipv6/ip6_flowlabel.c:671 suspicious rcu_dereference_check() usage!

we should use rcu_dereference_bh() when we hold rcu_read_lock_bh().

Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agodrivers: net: Remove remaining alloc/OOM messages
Joe Perches [Thu, 7 Feb 2013 11:46:27 +0000 (11:46 +0000)]
drivers: net: Remove remaining alloc/OOM messages

alloc failures already get standardized OOM
messages and a dump_stack.

For the affected mallocs around these OOM messages:

Converted kmallocs with multiplies to kmalloc_array.
Converted a kmalloc/memcpy to kmemdup.
Removed now unused stack variables.
Removed unnecessary parentheses.
Neatened alignment.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Arend van Spriel <arend@broadcom.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobgmac: fix "cmdcfg" calls for promisc and loopback modes
Rafał Miłecki [Thu, 7 Feb 2013 05:40:38 +0000 (05:40 +0000)]
bgmac: fix "cmdcfg" calls for promisc and loopback modes

The last (bool) parameter in bgmac_cmdcfg_maskset says if the write
should be made, even if value didn't change. Currently driver doesn't
match the specs about (not) forcing some changes. This makes it follow
them.

Reported-by: Nathan Hintz <nlhintz@hotmail.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobgmac: validate (and random if needed) MAC addr
Rafał Miłecki [Thu, 7 Feb 2013 00:27:17 +0000 (00:27 +0000)]
bgmac: validate (and random if needed) MAC addr

This adds check for a valid Ethernet MAC address and in case it is not,
it will generate a valid random one, such that the adapter is still
usable.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoskbuff: Move definition of NETDEV_FRAG_PAGE_MAX_SIZE
Alexander Duyck [Fri, 8 Feb 2013 10:17:15 +0000 (10:17 +0000)]
skbuff: Move definition of NETDEV_FRAG_PAGE_MAX_SIZE

In order to address the fact that some devices cannot support the full 32K
frag size we need to have the value accessible somewhere so that we can use it
to do comparisons against what the device can support.  As such I am moving
the values out of skbuff.c and into skbuff.h.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoLinux 3.8-rc7
Linus Torvalds [Fri, 8 Feb 2013 21:20:39 +0000 (08:20 +1100)]
Linux 3.8-rc7

11 years agoMerge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Linus Torvalds [Fri, 8 Feb 2013 21:01:18 +0000 (08:01 +1100)]
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM fixes from Russell King:
 "I was going to hold these off until v3.8 was out, and send them with a
  stable tag, but as everyone else is pushing much bigger fixes which
  Linus is accepting, let's save people from the hastle of having to
  patch v3.8 back into working or use a stable kernel.

  Looking at the diffstat, this really is high value for its size; this
  is miniscule compared to how the -rc6 to tip diffstat currently looks.

  So, four patches in this set:
   - Punit Agrawal reports that the kernel no longer boots on MPCore due
     to a new assumption made in the GIC code which isn't true of
     earlier GIC designs.  This is the biggest change in this set.
   - Punit's boot log also revealed a bunch of WARN_ON() dumps caused by
     the DT-ification of the GIC support without fixing up non-DT
     Realview - which now sees a greater number of interrupts than it
     did before.
   - A fix for the DMA coherent code from Marek which uses the wrong
     check for atomic allocations; this can result in spinlock lockups
     or other nasty effects.
   - A fix from Will, which will affect all Android based platforms if
     not applied (which use the 2G:2G VM split) - this causes
     particularly 'make' to misbehave unless this bug is fixed."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned
  ARM: DMA mapping: fix bad atomic test
  ARM: realview: ensure that we have sufficient IRQs available
  ARM: GIC: fix GIC cpumask initialization

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Fri, 8 Feb 2013 20:55:24 +0000 (07:55 +1100)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Revert iwlwifi reclaimed packet tracking, it causes problems for a
    bunch of folks.  From Emmanuel Grumbach.

 2) Work limiting code in brcmsmac wifi driver can clear tx status
    without processing the event.  From Arend van Spriel.

 3) rtlwifi USB driver processes wrong SKB, fix from Larry Finger.

 4) l2tp tunnel delete can race with close, fix from Tom Parkin.

 5) pktgen_add_device() failures are not checked at all, fix from Cong
    Wang.

 6) Fix unintentional removal of carrier off from tun_detach(),
    otherwise we confuse userspace, from Michael S.  Tsirkin.

 7) Don't leak socket reference counts and ubufs in vhost-net driver,
    from Jason Wang.

 8) vmxnet3 driver gets it's initial carrier state wrong, fix from Neil
    Horman.

 9) Protect against USB networking devices which spam the host with 0
    length frames, from Bjørn Mork.

10) Prevent neighbour overflows in ipv6 for locally destined routes,
    from Marcelo Ricardo.  This is the best short-term fix for this, a
    longer term fix has been implemented in net-next.

11) L2TP uses ipv4 datagram routines in it's ipv6 code, whoops.  This
    mistake is largely because the ipv6 functions don't even have some
    kind of prefix in their names to suggest they are ipv6 specific.
    From Tom Parkin.

12) Check SYN packet drops properly in tcp_rcv_fastopen_synack(), from
    Yuchung Cheng.

13) Fix races and TX skb freeing bugs in via-rhine's NAPI support, from
    Francois Romieu and your's truly.

14) Fix infinite loops and divides by zero in TCP congestion window
    handling, from Eric Dumazet, Neal Cardwell, and Ilpo Järvinen.

15) AF_PACKET tx ring handling can leak kernel memory to userspace, fix
    from Phil Sutter.

16) Fix error handling in ipv6 GRE tunnel transmit, from Tommi Rantala.

17) Protect XEN netback driver against hostile frontend putting garbage
    into the rings, don't leak pages in TX GOP checking, and add proper
    resource releasing in error path of xen_netbk_get_requests().  From
    Ian Campbell.

18) SCTP authentication keys should be cleared out and released with
    kzfree(), from Daniel Borkmann.

19) L2TP is a bit too clever trying to maintain skb->truesize, and ends
    up corrupting socket memory accounting to the point where packet
    sending is halted indefinitely.  Just remove the adjustments
    entirely, they aren't really needed.  From Eric Dumazet.

20) ATM Iphase driver uses a data type with the same name as the S390
    headers, rename to fix the build.  From Heiko Carstens.

21) Fix a typo in copying the inner network header offset from one SKB
    to another, from Pravin B Shelar.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits)
  net: sctp: sctp_endpoint_free: zero out secret key data
  net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree
  atm/iphase: rename fregt_t -> ffreg_t
  net: usb: fix regression from FLAG_NOARP code
  l2tp: dont play with skb->truesize
  net: sctp: sctp_auth_key_put: use kzfree instead of kfree
  netback: correct netbk_tx_err to handle wrap around.
  xen/netback: free already allocated memory on failure in xen_netbk_get_requests
  xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.
  xen/netback: shutdown the ring if it contains garbage.
  net: qmi_wwan: add more Huawei devices, including E320
  net: cdc_ncm: add another Huawei vendor specific device
  ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit()
  tcp: fix for zero packets_in_flight was too broad
  brcmsmac: rework of mac80211 .flush() callback operation
  ssb: unregister gpios before unloading ssb
  bcma: unregister gpios before unloading bcma
  rtlwifi: Fix scheduling while atomic bug
  net: usbnet: fix tx_dropped statistics
  tcp: ipv6: Update MIB counters for drops
  ...

11 years agoMerge branch 'wireless'
David S. Miller [Fri, 8 Feb 2013 20:18:40 +0000 (15:18 -0500)]
Merge branch 'wireless'

John W. Linville says:

====================
Please accept this pull request intended for the 3.9 stream!

Included are a mac80211 pull, an iwlwifi pull (actually two -- one
was a fast-forward), a wl12xx pull, and a couple of Bluetooth pulls.

On mac80211, Johannes says:

"I've included
 * AKM definitions from Bing,
 * mesh fixes from Thomas, including a fix from him for me breaking his
   patch while applying,
 * channel check fix from Simon,
 * an old patch from Yoni Divinsky who doesn't even work for TI any
   more, to configure the WEP TX key for ARP offload etc.
 * MAC ACL API from Vasanth
 * a fix for the infamous chanctx_conf warning from Arnd
 * from myself, a fix for my previous aggregation changes, some cleanup
   and some improvements and fixes for WoWLAN"

On iwlwifi, Johannes says:

"Two small changes for iwlwifi-next, one to update all our Copyright
notices and one to provide the RX page order."

And also:

"So what I have here is some cleanups, preparations and the new MVM
(multi-virtual MAC) driver itself and (this is new) some work on the
transport API as well as a message flooding fix."

On wl12xx, Luca says:

"Lots of bugfixes and improvements in our TI wireless drivers,
including support for multi-channel.  Intended for 3.9."

On Bluetooth, Gustavo says:

"This is my first pull request to 3.9. The biggest changes here are from Johan
Hedberg who made a lot of fixes in the Management interface. The issues arose
due to a new test tool we wrote and the usage of the Management interface as
default in BlueZ 5. The rest of the patches are more clean ups and small
fixes."

And also:

"Here goes another batch intended for 3.9, the majority of the patch here are
from Johan who is fixing many issues in the management interface that have
appeared lately. The rest of the patches are just small improvements, fixes
and clean ups."

Along with those are the usual variety of updates/enhancements to
the mwl8k, mwifiex, ath9k, rtlwifi, and rt2x00 drivers as well as
a few updates for the ssb and bcma busses.  I don't think there are
any big headliners there.

Please let me know if there are problems!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'sctp_keys'
David S. Miller [Fri, 8 Feb 2013 19:55:08 +0000 (14:55 -0500)]
Merge branch 'sctp_keys'

Daniel Borkmann says:

====================
Cryptographically used keys should be zeroed out when our session
ends resp. memory is freed, thus do not leave them somewhere in the
memory.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: sctp: sctp_endpoint_free: zero out secret key data
Daniel Borkmann [Fri, 8 Feb 2013 03:04:35 +0000 (03:04 +0000)]
net: sctp: sctp_endpoint_free: zero out secret key data

On sctp_endpoint_destroy, previously used sensitive keying material
should be zeroed out before the memory is returned, as we already do
with e.g. auth keys when released.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree
Daniel Borkmann [Fri, 8 Feb 2013 03:04:34 +0000 (03:04 +0000)]
net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree

In sctp_setsockopt_auth_key, we create a temporary copy of the user
passed shared auth key for the endpoint or association and after
internal setup, we free it right away. Since it's sensitive data, we
should zero out the key before returning the memory back to the
allocator. Thus, use kzfree instead of kfree, just as we do in
sctp_auth_key_put().

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoatm/iphase: rename fregt_t -> ffreg_t
Heiko Carstens [Fri, 8 Feb 2013 00:19:11 +0000 (00:19 +0000)]
atm/iphase: rename fregt_t -> ffreg_t

We have conflicting type qualifiers for "freg_t" in s390's ptrace.h and the
iphase atm device driver, which causes the compile error below.
Unfortunately the s390 typedef can't be renamed, since it's a user visible api,
nor can I change the include order in s390 code to avoid the conflict.

So simply rename the iphase typedef to a new name. Fixes this compile error:

In file included from drivers/atm/iphase.c:66:0:
drivers/atm/iphase.h:639:25: error: conflicting type qualifiers for 'freg_t'
In file included from next/arch/s390/include/asm/ptrace.h:9:0,
                 from next/arch/s390/include/asm/lowcore.h:12,
                 from next/arch/s390/include/asm/thread_info.h:30,
                 from include/linux/thread_info.h:54,
                 from include/linux/preempt.h:9,
                 from include/linux/spinlock.h:50,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:5,
                 from include/linux/stat.h:18,
                 from include/linux/module.h:10,
                 from drivers/atm/iphase.c:43:
next/arch/s390/include/uapi/asm/ptrace.h:197:3: note: previous declaration of 'freg_t' was here

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Fri, 8 Feb 2013 18:16:17 +0000 (13:16 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next into for-davem

11 years agoARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned
Will Deacon [Fri, 8 Feb 2013 11:52:29 +0000 (12:52 +0100)]
ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned

We have received multiple reports of mmap failures when running with a
2:2 vm split. These manifest as either -EINVAL with a non page-aligned
address (ending 0xaaa) or a SEGV, depending on the application. The
issue is commonly observed in children of make, which appears to use
bottom-up mmap (assumedly because it changes the stack rlimit).

Further investigation reveals that this regression was triggered by
394ef6403abc ("mm: use vm_unmapped_area() on arm architecture"), whereby
TASK_UNMAPPED_BASE is no longer page-aligned for bottom-up mmap, causing
get_unmapped_area to choke on misaligned addressed.

This patch fixes the problem by defining TASK_UNMAPPED_BASE in terms of
TASK_SIZE and explicitly aligns the result to 16M, matching the other
end of the heap.

Acked-by: Nicolas Pitre <nico@linaro.org>
Reported-by: Steve Capper <steve.capper@arm.com>
Reported-by: Jean-Francois Moine <moinejf@free.fr>
Reported-by: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
11 years agoARM: DMA mapping: fix bad atomic test
Russell King [Wed, 30 Jan 2013 23:55:35 +0000 (23:55 +0000)]
ARM: DMA mapping: fix bad atomic test

Realview fails to boot with this warning:
BUG: spinlock lockup suspected on CPU#0, init/1
 lock: 0xcf8bde10, .magic: dead4ead, .owner: init/1, .owner_cpu: 0
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:cf8bde10 r5:cf83d1c0 r4:cf8bde10 r3:cf83d1c0
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c018926c>] (spin_dump+0x84/0x98)
[<c01891e8>] (spin_dump+0x0/0x98) from [<c0189460>] (do_raw_spin_lock+0x100/0x198)
[<c0189360>] (do_raw_spin_lock+0x0/0x198) from [<c032cbac>] (_raw_spin_lock+0x3c/0x44)
[<c032cb70>] (_raw_spin_lock+0x0/0x44) from [<c01c9224>] (pl011_console_write+0xe8/0x11c)
[<c01c913c>] (pl011_console_write+0x0/0x11c) from [<c002aea8>] (call_console_drivers.clone.7+0xdc/0x104)
[<c002adcc>] (call_console_drivers.clone.7+0x0/0x104) from [<c002b320>] (console_unlock+0x2e8/0x454)
[<c002b038>] (console_unlock+0x0/0x454) from [<c002b8b4>] (vprintk_emit+0x2d8/0x594)
[<c002b5dc>] (vprintk_emit+0x0/0x594) from [<c0329718>] (printk+0x3c/0x44)
[<c03296dc>] (printk+0x0/0x44) from [<c002929c>] (warn_slowpath_common+0x28/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c)
[<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0070ab0>] (lockdep_trace_alloc+0xd8/0xf0)
[<c00709d8>] (lockdep_trace_alloc+0x0/0xf0) from [<c00c0850>] (kmem_cache_alloc+0x24/0x11c)
[<c00c082c>] (kmem_cache_alloc+0x0/0x11c) from [<c00bb044>] (__get_vm_area_node.clone.24+0x7c/0x16c)
[<c00bafc8>] (__get_vm_area_node.clone.24+0x0/0x16c) from [<c00bb7b8>] (get_vm_area_caller+0x48/0x54)
[<c00bb770>] (get_vm_area_caller+0x0/0x54) from [<c0020064>] (__alloc_remap_buffer.clone.15+0x38/0xb8)
[<c002002c>] (__alloc_remap_buffer.clone.15+0x0/0xb8) from [<c0020244>] (__dma_alloc+0x160/0x2c8)
[<c00200e4>] (__dma_alloc+0x0/0x2c8) from [<c00204d8>] (arm_dma_alloc+0x88/0xa0)[<c0020450>] (arm_dma_alloc+0x0/0xa0) from [<c00beb00>] (dma_pool_alloc+0xcc/0x1a8)
[<c00bea34>] (dma_pool_alloc+0x0/0x1a8) from [<c01a9d14>] (pl08x_fill_llis_for_desc+0x28/0x568)
[<c01a9cec>] (pl08x_fill_llis_for_desc+0x0/0x568) from [<c01aab8c>] (pl08x_prep_slave_sg+0x258/0x3b0)
[<c01aa934>] (pl08x_prep_slave_sg+0x0/0x3b0) from [<c01c9f74>] (pl011_dma_tx_refill+0x140/0x288)
[<c01c9e34>] (pl011_dma_tx_refill+0x0/0x288) from [<c01ca748>] (pl011_start_tx+0xe4/0x120)
[<c01ca664>] (pl011_start_tx+0x0/0x120) from [<c01c54a4>] (__uart_start+0x48/0x4c)
[<c01c545c>] (__uart_start+0x0/0x4c) from [<c01c632c>] (uart_start+0x2c/0x3c)
[<c01c6300>] (uart_start+0x0/0x3c) from [<c01c795c>] (uart_write+0xcc/0xf4)
[<c01c7890>] (uart_write+0x0/0xf4) from [<c01b0384>] (n_tty_write+0x1c0/0x3e4)
[<c01b01c4>] (n_tty_write+0x0/0x3e4) from [<c01acfe8>] (tty_write+0x144/0x240)
[<c01acea4>] (tty_write+0x0/0x240) from [<c01ad17c>] (redirected_tty_write+0x98/0xac)
[<c01ad0e4>] (redirected_tty_write+0x0/0xac) from [<c00c371c>] (vfs_write+0xbc/0x150)
[<c00c3660>] (vfs_write+0x0/0x150) from [<c00c39c0>] (sys_write+0x4c/0x78)
[<c00c3974>] (sys_write+0x0/0x78) from [<c0014460>] (ret_fast_syscall+0x0/0x3c)

This happens because the DMA allocation code is not respecting atomic
allocations correctly.

GFP flags should not be tested for GFP_ATOMIC to determine if an
atomic allocation is being requested.  GFP_ATOMIC is not a flag but
a value.  The GFP bitmask flags are all prefixed with __GFP_.

The rest of the kernel tests for __GFP_WAIT not being set to indicate
an atomic allocation.  We need to do the same.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
11 years agoARM: realview: ensure that we have sufficient IRQs available
Russell King [Wed, 30 Jan 2013 23:54:26 +0000 (23:54 +0000)]
ARM: realview: ensure that we have sufficient IRQs available

Realview EB with a rev B MPcore tile results in lots of warnings at
boot because it can't allocate enough IRQs.  Fix this by increasing
the number of available IRQs.

WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:757 gic_init_bases+0x12c/0x2ec()
Cannot allocate irq_descs @ IRQ96, assuming pre-allocated
Modules linked in:
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000002f5 r5:c042c62c r4:c044ff40 r3:c045f240
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029384>] (warn_slowpath_fmt+0x38/0x40)
[<c002934c>] (warn_slowpath_fmt+0x0/0x40) from [<c042c62c>] (gic_init_bases+0x12c/0x2ec)
[<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24)
[<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300)
[<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070)
---[ end trace 1b75b31a2719ed1c ]---
------------[ cut here ]------------
WARNING: at /home/rmk/git/linux-rmk/kernel/irq/irqdomain.c:234 irq_domain_add_legacy+0x80/0x140()
Modules linked in:
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000000ea r5:c0081a38 r4:00000000 r3:c045f240
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c)
[<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c0081a38>] (irq_domain_add_legacy+0x80/0x140)
[<c00819b8>] (irq_domain_add_legacy+0x0/0x140) from [<c042c64c>] (gic_init_bases+0x14c/0x2ec)
[<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24)
[<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300)
[<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070)
---[ end trace 1b75b31a2719ed1d ]---
------------[ cut here ]------------
WARNING: at /home/rmk/git/linux-rmk/arch/arm/common/gic.c:762 gic_init_bases+0x170/0x2ec()
Modules linked in:
Backtrace:
[<c00185d8>] (dump_backtrace+0x0/0x10c) from [<c03294e8>] (dump_stack+0x18/0x1c) r6:000002fa r5:c042c670 r4:00000000 r3:c045f240
[<c03294d0>] (dump_stack+0x0/0x1c) from [<c00292c8>] (warn_slowpath_common+0x54/0x6c)
[<c0029274>] (warn_slowpath_common+0x0/0x6c) from [<c0029304>] (warn_slowpath_null+0x24/0x2c)
[<c00292e0>] (warn_slowpath_null+0x0/0x2c) from [<c042c670>] (gic_init_bases+0x170/0x2ec)
[<c042c500>] (gic_init_bases+0x0/0x2ec) from [<c042cdc8>] (gic_init_irq+0x8c/0xd8)
[<c042cd3c>] (gic_init_irq+0x0/0xd8) from [<c042827c>] (init_IRQ+0x1c/0x24)
[<c0428260>] (init_IRQ+0x0/0x24) from [<c04256c8>] (start_kernel+0x1a4/0x300)
[<c0425524>] (start_kernel+0x0/0x300) from [<70008070>] (0x70008070)
---[ end trace 1b75b31a2719ed1e ]---

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
11 years agoARM: GIC: fix GIC cpumask initialization
Russell King [Wed, 30 Jan 2013 23:49:57 +0000 (23:49 +0000)]
ARM: GIC: fix GIC cpumask initialization

Punit Agrawal reports:
> I was trying to boot 3.8-rc5 on Realview EB 11MPCore using
> realview-smp_defconfig as a starting point but the kernel failed to
> progress past the log below (config attached).
>
> Pawel suggested I try reverting 384a290283f - "ARM: gic: use a private
> mapping for CPU target interfaces" that you've authored. With this
> commit reverted the kernel boots.
>
> I am not quite sure why the commit breaks 11MPCore but Pawel (cc'd)
> might be able to shed light on that.

Some early GIC implementations return zero for the first distributor
CPU routing register.  This means we can't rely on that telling us
which CPU interface we're connected to.  We know that these platforms
implement PPIs for IRQs 29-31 - but we shouldn't assume that these
will always be populated.

So, instead, scan for a non-zero CPU routing register in the first
32 IRQs and use that as our CPU mask.

Reported-by: Punit Agrawal <punit.agrawal@arm.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
11 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Fri, 8 Feb 2013 08:46:26 +0000 (19:46 +1100)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm regression fix from Dave Airlie:
 "This one fixes a sleep while locked regression that was introduced
  earlier in 3.8."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try

11 years agonet: usb: fix regression from FLAG_NOARP code
Lucas Stach [Thu, 7 Feb 2013 16:18:39 +0000 (16:18 +0000)]
net: usb: fix regression from FLAG_NOARP code

In commit 6509141f9c2ba74df6cc72ec35cd1865276ae3a4 ("usbnet: add new
flag FLAG_NOARP for usb net devices"), the newly added flag NOARP was
using an already defined value, which broke drivers using flag
MULTI_PACKET.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agol2tp: dont play with skb->truesize
Eric Dumazet [Thu, 7 Feb 2013 14:00:34 +0000 (14:00 +0000)]
l2tp: dont play with skb->truesize

Andrew Savchenko reported a DNS failure and we diagnosed that
some UDP sockets were unable to send more packets because their
sk_wmem_alloc was corrupted after a while (tx_queue column in
following trace)

$ cat /proc/net/udp
  sl  local_address rem_address   st tx_queue rx_queue tr tm->when retrnsmt   uid  timeout inode ref pointer drops
...
  459: 00000000:0270 00000000:0000 07 00000000:00000000 00:00000000 00000000     0        0 4507 2 ffff88003d612380 0
  466: 00000000:0277 00000000:0000 07 00000000:00000000 00:00000000 00000000     0        0 4802 2 ffff88003d613180 0
  470: 076A070A:007B 00000000:0000 07 FFFF4600:00000000 00:00000000 00000000   123        0 5552 2 ffff880039974380 0
  470: 010213AC:007B 00000000:0000 07 00000000:00000000 00:00000000 00000000     0        0 4986 2 ffff88003dbd3180 0
  470: 010013AC:007B 00000000:0000 07 00000000:00000000 00:00000000 00000000     0        0 4985 2 ffff88003dbd2e00 0
  470: 00FCA8C0:007B 00000000:0000 07 FFFFFB00:00000000 00:00000000 00000000     0        0 4984 2 ffff88003dbd2a80 0
...

Playing with skb->truesize is tricky, especially when
skb is attached to a socket, as we can fool memory charging.

Just remove this code, its not worth trying to be ultra
precise in xmit path.

Reported-by: Andrew Savchenko <bircoph@gmail.com>
Tested-by: Andrew Savchenko <bircoph@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'tg3'
David S. Miller [Fri, 8 Feb 2013 04:48:33 +0000 (23:48 -0500)]
Merge branch 'tg3'

Attention linux-next maintainer, you will hit a merge conflict between
this merge and the mips tree, the resolution is to preserve the removal
of uses of nvram_geenv() and nvram_parse_macaddr() from the net-next
side.

Hauke Mehrtens says:

====================
These patches are adding support for the Ethernet core found in the
BCM4705/BCM4785 SoC.

This is based on current master of davem/net-next.git.

v4:
 * move setting of DMA_RWCTRL_ONE_DMA

v3:
 * combined first two patches into one patch

v2:
 * use of struct sprom in ssb_gige_get_macaddr() instead of accessing
   the nvram directly
 * add return value to ssb_gige_get_macaddr()
 * try to read the mac address from ssb core before accessing the own
   registers.
 * fix two checkpatch warnings
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agotg3: add support for Ethernet core in bcm4785
Hauke Mehrtens [Thu, 7 Feb 2013 05:37:39 +0000 (05:37 +0000)]
tg3: add support for Ethernet core in bcm4785

The BCM4785 or sometimes named BMC4705 is a Broadcom SoC which a
Gigabit 5750 Ethernet core. The core is connected via PCI with the rest
of the SoC, but it uses some extension.

This core does not use a firmware or an eeprom.

Some devices only have a switch which supports 100MBit/s, this
currently does not work with this driver.

This patch was original written by Michael Buesch <m@bues.ch> and is in
OpenWrt for some years now.

This was tested on a Linksys WRT610N V1 and older versions of this patch
were tested by other people on different devices.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agotg3: make it possible to provide phy_id in ioctl
Hauke Mehrtens [Thu, 7 Feb 2013 05:37:38 +0000 (05:37 +0000)]
tg3: make it possible to provide phy_id in ioctl

In OpenWrt we currently use a switch driver which uses the ioctls to
configure the switch in the phy. We have to provide the phy_id to do
so, but without this patch this is not possible.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agossb: get mac address from sprom struct for gige driver
Hauke Mehrtens [Thu, 7 Feb 2013 05:37:37 +0000 (05:37 +0000)]
ssb: get mac address from sprom struct for gige driver

The mac address is already stored in the sprom structure by the
platform code of the SoC this Ethernet core is found on, it just has to
be fetched from this structure instead of accessing the nvram here.
This patch also adds a return value to indicate if a mac address could
be fetched from the sprom structure.
When CONFIG_SSB_DRIVER_GIGE is not set the header file now also declares
ssb_gige_get_macaddr().

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Michael Buesch <m@bues.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: sctp: sctp_auth_make_key_vector: remove duplicate ntohs calls
Daniel Borkmann [Thu, 7 Feb 2013 01:41:39 +0000 (01:41 +0000)]
net: sctp: sctp_auth_make_key_vector: remove duplicate ntohs calls

Instead of calling 3 times ntohs(random->param_hdr.length), 2 times
ntohs(hmacs->param_hdr.length), and 3 times ntohs(chunks->param_hdr.length)
within the same function, we only call each once and store it in a
variable.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: sctp: sctp_auth_key_put: use kzfree instead of kfree
Daniel Borkmann [Thu, 7 Feb 2013 00:55:37 +0000 (00:55 +0000)]
net: sctp: sctp_auth_key_put: use kzfree instead of kfree

For sensitive data like keying material, it is common practice to zero
out keys before returning the memory back to the allocator. Thus, use
kzfree instead of kfree.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswit...
David S. Miller [Fri, 8 Feb 2013 04:37:36 +0000 (23:37 -0500)]
Merge branch 'fixes' of git://git./linux/kernel/git/jesse/openvswitch into openvswitch

Jesse Gross says:

====================
One bug fix for net/3.8 for a long standing problem that was reported a few
times recently.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: fec: fix spin_lock dead lock
Frank Li [Wed, 6 Feb 2013 14:59:59 +0000 (14:59 +0000)]
net: fec: fix spin_lock dead lock

=========================================================
[ INFO: possible irq lock inversion dependency detected ]
3.8.0-rc5+ #82 Not tainted
---------------------------------------------------------
swapper/0/0 just changed the state of lock:
 (&(&fep->hw_lock)->rlock){..-...}, at: [<8034e2f8>] fec_enet_start_xmit+0x48/0x                      2cc
but this lock took another, SOFTIRQ-unsafe lock in the past:
(prepare_lock){+.+.+.}

and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Possible interrupt unsafe locking scenario:

CPU0 CPU1
---- ----
lock(prepare_lock);
local_irq_disable()
lock(&(&fep->hw_lock)->rlock);
lock(prepare_lock);
<Interrupt>
lock(&(&fep->hw_lock)->rlock);

*** DEADLOCK ***

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: fec: correct fix method about miss init spinlock
Frank Li [Wed, 6 Feb 2013 14:59:58 +0000 (14:59 +0000)]
net: fec: correct fix method about miss init spinlock

Old method will cause init spinlock twice.
New method will avoid init spinlock twice and fix miss init spinlock
at fec_restart.

BUG: spinlock bad magic on CPU#1, swapper/0/1
lock: 0xbfae0f8c, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
Backtrace:
 [<80011d54>] (dump_backtrace+0x0/0x10c) from [<804e7800>] (dump_stack+0x18/0x1c)
 r6:bfae0000 r5:bfae0f8c r4:00000000 r3:806c1310
 [<804e77e8>] (dump_stack+0x0/0x1c) from [<804e9f20>] (spin_dump+0x80/0x94)
 [<804e9ea0>] (spin_dump+0x0/0x94) from [<804e9f60>] (spin_bug+0x2c/0x30)
 r5:805f6f8c r4:bfae0f8c
 [<804e9f34>] (spin_bug+0x0/0x30) from [<80257984>] (do_raw_spin_lock+0x170/0x1b0                                         )
 r5:806b4950 r4:bfae0f8c
 [<80257814>] (do_raw_spin_lock+0x0/0x1b0) from [<804ed15c>] (_raw_spin_lock_irqs                                         ave+0x18/0x20)
 [<804ed144>] (_raw_spin_lock_irqsave+0x0/0x20) from [<8033c694>] (fec_ptp_start_                                         cyclecounter+0x3c/0x120)
 r4:bfae0f8c r3:00000002
 [<8033c658>] (fec_ptp_start_cyclecounter+0x0/0x120) from [<80339e08>] (fec_resta                                         rt+0x56c/0x5f8)
 r8:00000000 r7:806e6f48 r6:00000112 r5:806b4950 r4:bfae0000
 [<8033989c>] (fec_restart+0x0/0x5f8) from [<8033b9e4>] (fec_probe+0x508/0xa48)

Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agomlx4_en: Fix BQL reset TX queue call point
Tom Herbert [Wed, 6 Feb 2013 07:58:41 +0000 (07:58 +0000)]
mlx4_en: Fix BQL reset TX queue call point

Fix issue in Mellanox driver related to BQL.  netdev_tx_reset_queue
was not being called in certain situations where the device was
being start and stopped.  Moved netdev_tx_reset_queue from the reset
device path to mlx4_en_free_tx_buf which is where the rings are
cleaned in a reset (specifically from device being stopped).

Signed-off-by: Tom Herbert <therbert@google.com>
Acked-By: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'netback'
David S. Miller [Fri, 8 Feb 2013 04:31:47 +0000 (23:31 -0500)]
Merge branch 'netback'

Ian Campbell says:

====================
The Xen netback implementation contains a couple of flaws which can
allow a guest to cause a DoS in the backend domain, potentially
affecting other domains in the system.

CVE-2013-0216 is a failure to sanity check the ring producer/consumer
pointers which can allow a guest to cause netback to loop for an
extended period preventing other work from occurring.

CVE-2013-0217 is a memory leak on an error path which is guest
triggerable.

The following series contains the fixes for these issues, as previously
included in Xen Security Advisory 39:
http://lists.xen.org/archives/html/xen-announce/2013-02/msg00001.html

Changes in v2:
 - Typo and block comment format fixes
 - Added stable Cc
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonetback: correct netbk_tx_err to handle wrap around.
Ian Campbell [Wed, 6 Feb 2013 23:41:38 +0000 (23:41 +0000)]
netback: correct netbk_tx_err to handle wrap around.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoxen/netback: free already allocated memory on failure in xen_netbk_get_requests
Ian Campbell [Wed, 6 Feb 2013 23:41:37 +0000 (23:41 +0000)]
xen/netback: free already allocated memory on failure in xen_netbk_get_requests

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoxen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.
Matthew Daley [Wed, 6 Feb 2013 23:41:36 +0000 (23:41 +0000)]
xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.

Signed-off-by: Matthew Daley <mattjd@gmail.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoxen/netback: shutdown the ring if it contains garbage.
Ian Campbell [Wed, 6 Feb 2013 23:41:35 +0000 (23:41 +0000)]
xen/netback: shutdown the ring if it contains garbage.

A buggy or malicious frontend should not be able to confuse netback.
If we spot anything which is not as it should be then shutdown the
device and don't try to continue with the ring in a potentially
hostile state. Well behaved and non-hostile frontends will not be
penalised.

As well as making the existing checks for such errors fatal also add a
new check that ensures that there isn't an insane number of requests
on the ring (i.e. more than would fit in the ring). If the ring
contains garbage then previously is was possible to loop over this
insane number, getting an error each time and therefore not generating
any more pending requests and therefore not exiting the loop in
xen_netbk_tx_build_gops for an externded period.

Also turn various netdev_dbg calls which no precipitate a fatal error
into netdev_err, they are rate limited because the device is shutdown
afterwards.

This fixes at least one known DoS/softlockup of the backend domain.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'mlx4'
David S. Miller [Fri, 8 Feb 2013 04:28:32 +0000 (23:28 -0500)]
Merge branch 'mlx4'

Amir Vadai says:

====================
This series from Yan Burman adds support for unicast MAC address filtering and
ndo FDB operations.  It also includes some optimizations to loopback related
decisions and checks in the TX/RX fast path and one cleanup, all in separate
patches.

Today, when adding macvlan devices, the NIC goes into promiscuous mode, since
unicast MAC filtering is not supported. With these changes, macvlan devices can
be added without the penalty of promiscuous mode.

If for some reason adding a unicast address filter fails e.g as of missing space in
the HW mac table, the device forces itself into promiscuous mode (and out of this
forced state when enough space is available).

Also, now it is possible to have bridge under multi-function configuration that include
PF and VFs.  In order to use bridge over PF/VFs, VM MAC fdb entries must be added e.g.
using 'bridge fdb add' command.

Changes from v1 - based on more comments from Eric Dumazet:
* added failure handling when adding unicast address filter

Changes from v0 - based on comments from Eric Dumazet:
* Removed unneeded synchronize_rcu()
* Use kfree_rcu() instead of synchronize_rcu() + kfree()
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/mlx4_en: Implement ndo fdb functionality
Yan Burman [Thu, 7 Feb 2013 02:25:27 +0000 (02:25 +0000)]
net/mlx4_en: Implement ndo fdb functionality

Add support for setting embedded switch fdb in case of SRIOV, by
implementing ndo_fdb_{add, del, dump}. This will allow to use
bridged configuration with multi-function. In order to add VM MAC
to the eSwitch fdb, the following command may be used over the relevant function interface:
bridge fdb add <MAC> permanent self dev <IFACE>

Signed-off-by: Yan Burman <yanb@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/mlx4_en: Add unicast MAC filtering
Yan Burman [Thu, 7 Feb 2013 02:25:26 +0000 (02:25 +0000)]
net/mlx4_en: Add unicast MAC filtering

Implement and advertise unicast MAC filtering, such that setting macvlan
instance over mlx4_en interfaces will not require the networking core
to put mlx4_en devices in promiscuous mode.

If for some reason adding a unicast address filter fails e.g as of missing space in
the HW mac table, the device forces itself into promiscuous mode (and out of this
forced state when enough space is available).

Signed-off-by: Yan Burman <yanb@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/mlx4_en: Manage hash of MAC addresses per port
Yan Burman [Thu, 7 Feb 2013 02:25:25 +0000 (02:25 +0000)]
net/mlx4_en: Manage hash of MAC addresses per port

As a preparation step for supporting multiple unicast addresses, store MAC addresses in hash table.
Remove the radix tree for MAC addresses per QP, as it's not in use.

Signed-off-by: Yan Burman <yanb@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/mlx4_en: Save previous MAC address of the port so we can replace it later
Yan Burman [Thu, 7 Feb 2013 02:25:24 +0000 (02:25 +0000)]
net/mlx4_en: Save previous MAC address of the port so we can replace it later

In preparation to having more than one unicast MAC per port, we need to keep track
of the previous MAC address in the flow of ndo_set_mac_address,
so that mlx4_en_replace_mac will know what to replace.

Signed-off-by: Yan Burman <yanb@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/mlx4_en: Re-arrange ndo_set_rx_mode related code
Yan Burman [Thu, 7 Feb 2013 02:25:23 +0000 (02:25 +0000)]
net/mlx4_en: Re-arrange ndo_set_rx_mode related code

Currently, mlx4_en_do_set_multicast serves as the ndo_set_rx_mode entry for mlx4_en,
doing all related work. Split it to few calls, one per required functionality
(e.g multicast, promiscuous, etc) and rename some structures and calls
to use rx_mode notation instead of multicast.

Signed-off-by: Yan Burman <yanb@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/mlx4: Move Ethernet related functionality from mlx4_core to mlx4_en
Yan Burman [Thu, 7 Feb 2013 02:25:22 +0000 (02:25 +0000)]
net/mlx4: Move Ethernet related functionality from mlx4_core to mlx4_en

Move low level code that deals with management of Ethernet MACs and QPs from mlx4_core to mlx4_en.
Also convert the new functions to deal with MACs in form of char array instead of u64.

Actual functions moved:
mlx4_replace_mac
mlx4_get_eth_qp
mlx4_put_eth_qp

To conduct this change, some functionality had to be exported from the core,
the following functions were added:
mlx4_get_base_qp
__mlx4_replace_mac (low level function for CX1/A0 compatibility)

Signed-off-by: Yan Burman <yanb@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/mlx4_en: Cleanup multiline strings
Yan Burman [Thu, 7 Feb 2013 02:25:21 +0000 (02:25 +0000)]
net/mlx4_en: Cleanup multiline strings

Make the code consistent in regard to error messages
not spanning multiple lines.

Signed-off-by: Yan Burman <yanb@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/mlx4_en: Optimize Rx fast path filter checks
Yan Burman [Thu, 7 Feb 2013 02:25:20 +0000 (02:25 +0000)]
net/mlx4_en: Optimize Rx fast path filter checks

Currently, RX path code that does RX filtering is not optimized
and does an expensive conversion. In order to use ether_addr_equal_64bits
which is optimized for such cases, we need the MAC address kept by the device
to be in the form of unsigned char array instead of u64. Store the MAC address
as unsigned char array and convert to/from u64 out of the fast path when needed.
Side effect of this is that we no longer need priv->mac, since it's the same
as dev->dev_addr.

This optimization was suggested by Eric Dumazet <eric.dumazet@gmail.com>

Signed-off-by: Yan Burman <yanb@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet/mlx4_en: Optimize loopback related checks in data path
Yan Burman [Thu, 7 Feb 2013 02:25:19 +0000 (02:25 +0000)]
net/mlx4_en: Optimize loopback related checks in data path

Currently there are relatively complex conditional checks in the fast path,
for TX loopback enabling and resulting RX filter logic.
Move elaborate if's out of data path, replace them with a single flag
for each state and update that state from appropriate places.
Also, in native (non SRIOV) mode and not in loopback or in selftest,
there is no need to try and filter out packets that HW loopback-ed,
as in native mode we do not loopback packets anymore.

Signed-off-by: Yan Burman <yanb@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty...
Linus Torvalds [Fri, 8 Feb 2013 01:22:30 +0000 (12:22 +1100)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/rusty/linux

Pull virtio fix from Rusty Russell:
 "Obviously I forgot to push this before linux.conf.au..."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio_console: Don't access uninitialized data.

11 years agoMerge tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Fri, 8 Feb 2013 01:15:14 +0000 (12:15 +1100)]
Merge tag 'rdma-for-linus' of git://git./linux/kernel/git/roland/infiniband

Pull IB regression fixes from Roland Dreier:

 - Fix mlx4 VFs not working on old guests because of 64B CQE changes

 - Fix ill-considered sparse fix for qib

 - Fix IPoIB crash due to skb double destruct introduced in 3.8-rc1

* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/qib: Fix for broken sparse warning fix
  mlx4_core: Fix advertisement of wrong PF context behaviour
  IPoIB: Fix crash due to skb double destruct

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux...
Linus Torvalds [Fri, 8 Feb 2013 01:06:46 +0000 (12:06 +1100)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs fixes from Chris Mason:
 "We've got corner cases for updating i_size that ceph was hitting,
  error handling for quotas when we run out of space, a very subtle
  snapshot deletion race, a crash while removing devices, and one
  deadlock between subvolume creation and the sb_internal code (thanks
  lockdep)."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: move d_instantiate outside the transaction during mksubvol
  Btrfs: fix EDQUOT handling in btrfs_delalloc_reserve_metadata
  Btrfs: fix possible stale data exposure
  Btrfs: fix missing i_size update
  Btrfs: fix race between snapshot deletion and getting inode
  Btrfs: fix missing release of the space/qgroup reservation in start_transaction()
  Btrfs: fix wrong sync_writers decrement in btrfs_file_aio_write()
  Btrfs: do not merge logged extents if we've removed them from the tree
  btrfs: don't try to notify udev about missing devices

11 years agoMerge tag 'pinctrl-for-v3.8-late' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 8 Feb 2013 01:00:44 +0000 (12:00 +1100)]
Merge tag 'pinctrl-for-v3.8-late' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull late pinctrl fixes from Linus Walleij:
 "Two patches appeared as of late, one was completely news to me, the
  other one was rotated in -next for the next merge window but turned
  out to be a showstopper.

   - Exynos Kconfig fixup
   - SIRF DT translation bug"

* tag 'pinctrl-for-v3.8-late' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: sirf: replace of_gpio_simple_xlate by sirf specific of_xlate
  pinctrl: exynos: change PINCTRL_EXYNOS option

11 years agoMerge tag 'stable/for-linus-3.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 8 Feb 2013 00:55:27 +0000 (11:55 +1100)]
Merge tag 'stable/for-linus-3.8-rc6-tag' of git://git./linux/kernel/git/konrad/xen

Pull Xen fixes from Konrad Rzeszutek Wilk:
 "This has two fixes.  One is a security fix wherein we would spam the
  kernel printk buffer if one of the guests was misbehaving.  The other
  is much tamer and it was us only checking for one type of error from
  the IRQ subsystem (when allocating new IRQs) instead of for all of
  them.

   - Fix an IRQ allocation where we only check for a specific error (-1).
   - CVE-2013-0231 / XSA-43.  Make xen-pciback rate limit error messages
     from xen_pcibk_enable_msi{,x}()"

* tag 'stable/for-linus-3.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: fix error handling path if xen_allocate_irq_dynamic fails
  xen-pciback: rate limit error messages from xen_pcibk_enable_msi{,x}()

11 years agoMerge tag 'regulator-v3.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broon...
Linus Torvalds [Fri, 8 Feb 2013 00:52:53 +0000 (11:52 +1100)]
Merge tag 'regulator-v3.8-rc6' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Mostly driver specific fixes here, though one of them uncovered the
  issue Stephen Warren fixed with multiple OF matches getting upset due
  to a lack of cleanup."

* tag 'regulator-v3.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: s2mps11: fix incorrect register for buck10
  regulator: clear state each invocation of of_regulator_match
  regulator: max8997: Fix using wrong dev argument at various places
  regulator: max77686: Fix using wrong dev argument at various places
  regulator: max8907: Fix using wrong dev argument for calling of_regulator_match
  regulator: max8998: fix incorrect min_uV value for ldo10
  regulator: tps65910: Fix using wrong dev argument for calling of_regulator_match
  regulator: tps65217: Fix using wrong dev argument for calling of_regulator_match

11 years agodrm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try
Daniel Vetter [Mon, 14 Jan 2013 14:08:14 +0000 (15:08 +0100)]
drm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try

This fixes up

commit e8e89622ed361c46bf90ba4828e685a8b603f7e5
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Dec 18 22:25:11 2012 +0100

    drm/ttm: fix fence locking in ttm_buffer_object_transfer

which leaves behind a might_sleep in atomic context, since the
fence_lock spinlock is held over a kmalloc(GFP_KERNEL) call. The fix
is to revert the above commit and only take the lock where we need it,
around the call to ->sync_obj_ref.

v2: Fixup things noticed by Maarten Lankhorst:
- Brown paper bag locking bug.
- No need for kzalloc if we clear the entire thing on the next line.
- check for bo->sync_obj (totally unlikely race, but still someone
  else could have snuck in) and clear fbo->sync_obj if it's cleared
  already.

Reported-by: Dave Airlie <airlied@gmail.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
11 years agovirtio_console: Don't access uninitialized data.
Sjur Brændeland [Mon, 21 Jan 2013 23:20:26 +0000 (09:50 +1030)]
virtio_console: Don't access uninitialized data.

Don't access uninitialized work-queue when removing device.
The work queue is initialized only if the device multi-queue.
So don't call cancel_work unless this is a multi-queue device.

This fixes the following panic:

Kernel panic - not syncing: BUG!
Call Trace:
62031b28:  [<6026085d>] panic+0x16b/0x2d3
62031b30:  [<6004ef5e>] flush_work+0x0/0x1d7
62031b60:  [<602606f2>] panic+0x0/0x2d3
62031b68:  [<600333b0>] memcpy+0x0/0x140
62031b80:  [<6002d58a>] unblock_signals+0x0/0x84
62031ba0:  [<602609c5>] printk+0x0/0xa0
62031bd8:  [<60264e51>] __mutex_unlock_slowpath+0x13d/0x148
62031c10:  [<6004ef5e>] flush_work+0x0/0x1d7
62031c18:  [<60050234>] try_to_grab_pending+0x0/0x17e
62031c38:  [<6004e984>] get_work_gcwq+0x71/0x8f
62031c48:  [<60050539>] __cancel_work_timer+0x5b/0x115
62031c78:  [<628acc85>] unplug_port+0x0/0x191 [virtio_console]
62031c98:  [<6005061c>] cancel_work_sync+0x12/0x14
62031ca8:  [<628ace96>] virtcons_remove+0x80/0x15c [virtio_console]
62031ce8:  [<628191de>] virtio_dev_remove+0x1e/0x7e [virtio]
62031d08:  [<601cf242>] __device_release_driver+0x75/0xe4
62031d28:  [<601cf2dd>] device_release_driver+0x2c/0x40
62031d48:  [<601ce0dd>] driver_unbind+0x7d/0xc6
62031d88:  [<601cd5d9>] drv_attr_store+0x27/0x29
62031d98:  [<60115f61>] sysfs_write_file+0x100/0x14d
62031df8:  [<600b737d>] vfs_write+0xcb/0x184
62031e08:  [<600b58b8>] filp_close+0x88/0x94
62031e38:  [<600b7686>] sys_write+0x59/0x88
62031e88:  [<6001ced1>] handle_syscall+0x5d/0x80
62031ea8:  [<60030a74>] userspace+0x405/0x531
62031f08:  [<600d32cc>] sys_dup+0x0/0x5e
62031f28:  [<601b11d6>] strcpy+0x0/0x18
62031f38:  [<600be46c>] do_execve+0x10/0x12
62031f48:  [<600184c7>] run_init_process+0x43/0x45
62031fd8:  [<60019a91>] new_thread_handler+0xba/0xbc

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Cc: stable@kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
11 years agoMerge tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Wed, 6 Feb 2013 21:43:30 +0000 (08:43 +1100)]
Merge tag 'sound-3.8' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Just a couple of build regression fixes for ASoC fsl stuff.  It
  doesn't look too trivial, but neither intrusive, so hopefully I can
  avoid your curse..."

Hey, Takashi has a good track record, I think he gets a pass..

* tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: fsl: fix snd-soc-imx-pcm module build
  Revert "ASoC: fsl: fix multiple definition of init_module"

11 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-block
Linus Torvalds [Wed, 6 Feb 2013 21:38:33 +0000 (08:38 +1100)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block layer updates from Jens Axboe:
 "I've got a few bits pending for 3.8 final, that I better get sent out.
  It's all been sitting for a while, I consider it safe.

  It contains:

   - Two bug fixes for mtip32xx, fixing a driver hang and a crash.

   - A few-liner protocol error fix for drbd.

   - A few fixes for the xen block front/back driver, fixing a potential
     data corruption issue.

   - A race fix for disk_clear_events(), causing spurious warnings.  Out
     of the Chrome OS base.

   - A deadlock fix for disk_clear_events(), moving it to the a
     unfreezable workqueue.  Also from the Chrome OS base."

* 'for-linus' of git://git.kernel.dk/linux-block:
  drbd: fix potential protocol error and resulting disconnect/reconnect
  mtip32xx: fix for crash when the device surprise removed during rebuild
  mtip32xx: fix for driver hang after a command timeout
  block: prevent race/cleanup
  block: remove deadlock in disk_clear_events
  xen-blkfront: handle bvecs with partial data
  llist/xen-blkfront: implement safe version of llist_for_each_entry
  xen-blkback: implement safe iterator for the list of persistent grants

11 years agonet: qmi_wwan: add more Huawei devices, including E320
Bjørn Mork [Wed, 6 Feb 2013 05:22:08 +0000 (05:22 +0000)]
net: qmi_wwan: add more Huawei devices, including E320

Adding new class/subclass/protocol combinations based on the GPLed
out-of-tree Huawei driver. One of these has already appeared on a
device labelled as "E320".

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: cdc_ncm: add another Huawei vendor specific device
Bjørn Mork [Wed, 6 Feb 2013 05:21:53 +0000 (05:21 +0000)]
net: cdc_ncm: add another Huawei vendor specific device

Adding a new vendor specific class/subclass/protocol combination
for CDC NCM devices based on information from a GPLed out-of-tree
driver from Huawei.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobgmac: add ndo_set_rx_mode netdev ops
Hauke Mehrtens [Wed, 6 Feb 2013 05:51:49 +0000 (05:51 +0000)]
bgmac: add ndo_set_rx_mode netdev ops

When changing the device from or to promisc mode this only affects the
device after the device is bought up the next time. For bridging it is
needed to change the device to promisc mode while it is up, which is
possible with this patch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobgmac: add generic ndo_validate_addr netdev ops
Hauke Mehrtens [Wed, 6 Feb 2013 04:44:59 +0000 (04:44 +0000)]
bgmac: add generic ndo_validate_addr netdev ops

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobgmac: write mac address to hardware in ndo_set_mac_address
Hauke Mehrtens [Wed, 6 Feb 2013 04:44:58 +0000 (04:44 +0000)]
bgmac: write mac address to hardware in ndo_set_mac_address

The generic implementation just changes the netdev struct and does not
write the new mac address to the hardware or issues some command to do
so.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobgmac: implement missing code for BCM53572
Hauke Mehrtens [Wed, 6 Feb 2013 04:44:57 +0000 (04:44 +0000)]
bgmac: implement missing code for BCM53572

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit()
Tommi Rantala [Wed, 6 Feb 2013 03:24:02 +0000 (03:24 +0000)]
ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit()

ip6gre_tunnel_xmit() is leaking the skb when we hit this error branch,
and the -1 return value from this function is bogus. Use the error
handling we already have in place in ip6gre_tunnel_xmit() for this error
case to fix this.

Signed-off-by: Tommi Rantala <tt.rantala@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agomacvlan: add multicast filter
Eric Dumazet [Tue, 5 Feb 2013 20:22:50 +0000 (20:22 +0000)]
macvlan: add multicast filter

Setting up IPv6 addresses on configurations with many macvlans
is not really working, as many multicast messages are dropped.

Add a multicast filter to macvlan to reduce the amount of cloned
skbs and overhead.

Successfully tested with 1024 macvlans on one ethernet device.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: reset mac header in dev_start_xmit()
Eric Dumazet [Tue, 5 Feb 2013 20:22:20 +0000 (20:22 +0000)]
net: reset mac header in dev_start_xmit()

On 64 bit arches :

There is a off-by-one error in qdisc_pkt_len_init() because
mac_header is not set in xmit path.

skb_mac_header() returns an out of bound value that was
harmless because hdr_len is an 'unsigned int'

On 32bit arches, the error is abysmal.

This patch is also a prereq for "macvlan: add multicast filter"

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: adjust skb_gso_segment() for calling in rx path
Cong Wang [Tue, 5 Feb 2013 16:36:38 +0000 (16:36 +0000)]
net: adjust skb_gso_segment() for calling in rx path

skb_gso_segment() is almost always called in tx path,
except for openvswitch. It calls this function when
it receives the packet and tries to queue it to user-space.
In this special case, the ->ip_summed check inside
skb_gso_segment() is no longer true, as ->ip_summed value
has different meanings on rx path.

This patch adjusts skb_gso_segment() so that we can at least
avoid such warnings on checksum.

Cc: Jesse Gross <jesse@nicira.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>