GitHub/LineageOS/android_kernel_motorola_exynos9610.git
12 years agodrivers/net/oki-semi: Remove the definition of PCH_GBE_ETH_ALEN
RongQing.Li [Thu, 26 Apr 2012 21:01:12 +0000 (21:01 +0000)]
drivers/net/oki-semi: Remove the definition of PCH_GBE_ETH_ALEN

PCH_GBE_ETH_ALEN is equal to ETH_ALEN, so we can replace it with
ETH_ALEN.

If they are not equal, it must be a bug, since this is ethernet,
and the address has been already stored to mc_addr_list as ETH_ALEN
bytes when call pch_gbe_mac_mc_addr_list_update.

Signed-off-by: RongQing.Li <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet/at91_ether: use gpio_to_irq for phy IRQ line
Nicolas Ferre [Thu, 26 Apr 2012 00:30:43 +0000 (00:30 +0000)]
net/at91_ether: use gpio_to_irq for phy IRQ line

Use the gpio_to_irq() function to retrieve the phy IRQ line
from the GPIO pin specification.
This fix is needed now that we have moved to irqdomains on AT91.

Reported-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Andrew Victor <avictor.za@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoAT91: Remove fixed mapping for AT91RM9200 ethernet
Andrew Victor [Thu, 26 Apr 2012 00:30:42 +0000 (00:30 +0000)]
AT91: Remove fixed mapping for AT91RM9200 ethernet

The AT91RM9200 Ethernet controller still has a fixed IO mapping.
So:
* Remove the fixed IO mapping and AT91_VA_BASE_EMAC definition.
* Pass the physical base-address via platform-resources to the driver.
* Convert at91_ether.c driver to perform an ioremap().
* Ethernet PHY detection needs to be performed during the driver
initialization process, it can no longer be done first.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: Fixed a coding style issue related to spaces.
Jeffrin Jose [Wed, 25 Apr 2012 13:47:29 +0000 (19:17 +0530)]
net: Fixed a coding style issue related to spaces.

Fixed a coding style issue relating to spaces
in net/core/sock.c

Signed-off-by: Jeffrin Jose <ahiliation@yahoo.co.in>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: cleanups in sock_setsockopt()
Eric Dumazet [Thu, 26 Apr 2012 20:07:59 +0000 (20:07 +0000)]
net: cleanups in sock_setsockopt()

Use min_t()/max_t() macros, reformat two comments, use !!test_bit() to
match !!sock_flag()

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: doc: merge /proc/sys/net/core/* documents into one place
Shan Wei [Thu, 26 Apr 2012 16:52:52 +0000 (16:52 +0000)]
net: doc: merge /proc/sys/net/core/* documents into one place

All parameter descriptions in /proc/sys/net/core/* now is separated
two places. So, merge them into Documentation/sysctl/net.txt.

Signed-off-by: Shan Wei <davidshan@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobe2net: update the driver version
Ajit Khaparde [Thu, 26 Apr 2012 15:42:46 +0000 (15:42 +0000)]
be2net: update the driver version

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobe2net: fix speed displayed by ethtool on certain SKUs
Ajit Khaparde [Thu, 26 Apr 2012 15:42:39 +0000 (15:42 +0000)]
be2net: fix speed displayed by ethtool on certain SKUs

logical speed returned by link_status_query needs to be multiplied by 10.

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobe2net: Ignore status of some ioctls during driver load
Ajit Khaparde [Thu, 26 Apr 2012 15:42:31 +0000 (15:42 +0000)]
be2net: Ignore status of some ioctls during driver load

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoNET: smsc-ircc2: mark non-experimental
Linus Walleij [Thu, 26 Apr 2012 11:51:07 +0000 (11:51 +0000)]
NET: smsc-ircc2: mark non-experimental

This has been used by me and others for ages, let's stop calling it
experimental.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobonding: bond_update_speed_duplex() can return void since no callers check its return
Rick Jones [Thu, 26 Apr 2012 11:20:30 +0000 (11:20 +0000)]
bonding: bond_update_speed_duplex() can return void since no callers check its return

As none of the callers of bond_update_speed_duplex (need to) check its
return value, there is little point in it returning anything.

Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoqlcnic: Allow a predefined set of capture masks for FW dump
Manish Chopra [Thu, 26 Apr 2012 10:31:31 +0000 (10:31 +0000)]
qlcnic: Allow a predefined set of capture masks for FW dump

o 0x3, 0x7, 0xF, 0x1F, 0x3F, 0x7F and 0xFF are the allowed capture masks.
o Updated driver version to 5.0.28

Signed-off-by: Manish chopra <manish.chopra@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoqlcnic: Adding mac statistics to ethtool.
Jitendra Kalsaria [Thu, 26 Apr 2012 10:31:30 +0000 (10:31 +0000)]
qlcnic: Adding mac statistics to ethtool.

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoqlcnic: Register device in FAILED state.
Sucheta Chakraborty [Thu, 26 Apr 2012 10:31:29 +0000 (10:31 +0000)]
qlcnic: Register device in FAILED state.

o Without failing probe, register netdevice when device is in FAILED state.
o Device will come up with minimum functionality.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agocrush: include header for global symbols
hartleys [Tue, 24 Apr 2012 14:38:37 +0000 (14:38 +0000)]
crush: include header for global symbols

Include the header to pickup the definitions of the global symbols.

Quiets the following sparse warnings:

warning: symbol 'crush_find_rule' was not declared. Should it be static?
warning: symbol 'crush_do_rule' was not declared. Should it be static?

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Sage Weil <sage@newdream.net>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoisdn/eicon: use standard __init,__exit function markup
hartleys [Tue, 24 Apr 2012 12:56:03 +0000 (12:56 +0000)]
isdn/eicon: use standard __init,__exit function markup

Remove the custom DIVA_{INIT,EXIT}_FUNCTION defines and use
the standard __init,__exit markup.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Armin Schindler <mac@melware.de>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoipv6: RTAX_FEATURE_ALLFRAG causes inefficient TCP segment sizing
Eric Dumazet [Tue, 24 Apr 2012 07:37:38 +0000 (07:37 +0000)]
ipv6: RTAX_FEATURE_ALLFRAG causes inefficient TCP segment sizing

Quoting Tore Anderson from :
https://bugzilla.kernel.org/show_bug.cgi?id=42572

When RTAX_FEATURE_ALLFRAG is set on a route, the effective TCP segment
size does not take into account the size of the IPv6 Fragmentation
header that needs to be included in outbound packets, causing every
transmitted TCP segment to be fragmented across two IPv6 packets, the
latter of which will only contain 8 bytes of actual payload.

RTAX_FEATURE_ALLFRAG is typically set on a route in response to
receving a ICMPv6 Packet Too Big message indicating a Path MTU of less
than 1280 bytes. 1280 bytes is the minimum IPv6 MTU, however ICMPv6
PTBs with MTU < 1280 are still valid, in particular when an IPv6
packet is sent to an IPv4 destination through a stateless translator.
Any ICMPv4 Need To Fragment packets originated from the IPv4 part of
the path will be translated to ICMPv6 PTB which may then indicate an
MTU of less than 1280.

The Linux kernel refuses to reduce the effective MTU to anything below
1280 bytes, instead it sets it to exactly 1280 bytes, and
RTAX_FEATURE_ALLFRAG is also set. However, the TCP segment size appears
to be set to 1240 bytes (1280 Path MTU - 40 bytes of IPv6 header),
instead of 1232 (additionally taking into account the 8 bytes required
by the IPv6 Fragmentation extension header).

This in turn results in rather inefficient transmission, as every
transmitted TCP segment now is split in two fragments containing
1232+8 bytes of payload.

After this patch, all the outgoing packets that includes a
Fragmentation header all are "atomic" or "non-fragmented" fragments,
i.e., they both have Offset=0 and More Fragments=0.

With help from David S. Miller

Reported-by: Tore Anderson <tore@fud.no>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Tom Herbert <therbert@google.com>
Tested-by: Tore Anderson <tore@fud.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoMerge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville...
David S. Miller [Thu, 26 Apr 2012 19:54:45 +0000 (15:54 -0400)]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless-next

12 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Thu, 26 Apr 2012 19:03:48 +0000 (15:03 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next into for-davem

Conflicts:
drivers/net/wireless/iwlwifi/iwl-testmode.c

12 years agotcp repair: Fix unaligned access when repairing options (v2)
Pavel Emelyanov [Wed, 25 Apr 2012 23:43:04 +0000 (23:43 +0000)]
tcp repair: Fix unaligned access when repairing options (v2)

Don't pick __u8/__u16 values directly from raw pointers, but instead use
an array of structures of code:value pairs. This is OK, since the buffer
we take options from is not an skb memory, but a user-to-kernel one.

For those options which don't require any value now, require this to be
zero (for potential future extension of this API).

v2: Changed tcp_repair_opt to use two __u32-s as spotted by David Laight.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years ago6lowpan: duplicate definition of IEEE802154_ALEN
alex.bluesman.smirnov@gmail.com [Wed, 25 Apr 2012 23:35:51 +0000 (23:35 +0000)]
6lowpan: duplicate definition of IEEE802154_ALEN

The same macros is defined in 'include/net/af_ieee802154.h' and is called
IEEE802154_ADDR_LEN. No need another one, so remove it.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years ago6lowpan: move frame allocation code to a separate function
alex.bluesman.smirnov@gmail.com [Wed, 25 Apr 2012 23:35:50 +0000 (23:35 +0000)]
6lowpan: move frame allocation code to a separate function

Separate frame allocation routine from data processing function.
This makes code more human readable and easier for understanding.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agomISDN: Added support for fragmentation of E1 interfaces of hfcmulti driver.
Andreas Eversberg [Tue, 24 Apr 2012 20:52:14 +0000 (20:52 +0000)]
mISDN: Added support for fragmentation of E1 interfaces of hfcmulti driver.

Fragmentation is usefull if multiple devices are connected to an E1
interface. Each fragment will have a subset of the available timeslots.
These devices require a cascde connection or a multiplexer.

Signed-off-by: Andreas Eversberg <jolly@eversberg.eu>
Signed-off-by: Karsten Keil <keil@b1-systems.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agomISDN: Rework of LED status display for HFC-4S/8S/E1 cards.
Andreas Eversberg [Tue, 24 Apr 2012 20:52:13 +0000 (20:52 +0000)]
mISDN: Rework of LED status display for HFC-4S/8S/E1 cards.

LEDs will show RED if layer 1 is disabled or fails.
LEDs will show GREEN if layer 1 is active.
LEDs will blink if traffic on D-channel.

Signed-off-by: Andreas Eversberg <jolly@eversberg.eu>
Signed-off-by: Karsten Keil <keil@b1-systems.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agomISDN: Using FLG_ACTIVE flag to determine if layer 1 is active or not.
Andreas Eversberg [Tue, 24 Apr 2012 20:52:12 +0000 (20:52 +0000)]
mISDN: Using FLG_ACTIVE flag to determine if layer 1 is active or not.

We already have the flag for L1 active, so we should use it.
L2 will be solved in a later patch.

Signed-off-by: Andreas Eversberg <andreas@eversberg.eu>
Signed-off-by: Karsten Keil <keil@b1-systems.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agomISDN: Fixed false interruption of audio during bridging change.
Andreas Eversberg [Tue, 24 Apr 2012 20:52:11 +0000 (20:52 +0000)]
mISDN: Fixed false interruption of audio during bridging change.

Transmitted audio data was interrupted if a bridge was enabled or disabled.
Now transmission seamlessly continues during that action.
Fix in hfcmulti.ko

Signed-off-by: Andreas Eversberg <jolly@eversberg.eu>
Signed-off-by: Karsten Keil <keil@b1-systems.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoatl1c: refine start/enable code for MAC module
Huang, Xiong [Wed, 25 Apr 2012 20:41:00 +0000 (20:41 +0000)]
atl1c: refine start/enable code for MAC module

merge TXQ/RXQ/MAC start/enable code to one function as they
are started/enabled at the same time, just like stop/disable them
in the function of atl1c_stop_mac.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoatl1c: add function atl1c_power_saving
Huang, Xiong [Wed, 25 Apr 2012 20:40:59 +0000 (20:40 +0000)]
atl1c: add function atl1c_power_saving

This function is used for suspend of S1/S3/S4 and driver remove.
It sets MAC/PHY based on the WoL configuation to get lower power
consumption.
atl1c_phy_power_saving is renamed to atl1c_phy_to_ps_link, this
function is just make PHY enter a link/speed mode to eat less
power.
REG_MAC_CTRL register is refined as well.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoatl1c: remove PHY reset/init for link down event
Huang, Xiong [Wed, 25 Apr 2012 20:27:15 +0000 (20:27 +0000)]
atl1c: remove PHY reset/init for link down event

it's unnecessary to reset/init phy when link down.
Only L1/L2 chip (supported by atlx) need such action.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoatl1c: update PHY reset related routine
Huang, Xiong [Wed, 25 Apr 2012 20:27:14 +0000 (20:27 +0000)]
atl1c: update PHY reset related routine

Many magic data are re-configured for PHY during its reset operation
based on chip type to get better compability and stability.
REG_PHY_CTRL register may be configured by BIOS before enter OS.
so, the driver can't directly write to it without any Read-Op.
this change also affect suspend and phy_disable routines.
PHY debug ports and extension registers are refined as well.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoatl1c: remove PHY polling from atl1c_open
Huang, Xiong [Wed, 25 Apr 2012 20:27:13 +0000 (20:27 +0000)]
atl1c: remove PHY polling from atl1c_open

PHY polling code for FPGA is considered in every MDIO R/W API.
no need to add additional code to atl1c_open.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoatl1c: refine SERDES-clock related code
Huang, Xiong [Wed, 25 Apr 2012 20:27:12 +0000 (20:27 +0000)]
atl1c: refine SERDES-clock related code

bit 17/18 of reg1424 must be clear for l2cb 1.x, or it will cause
the write-reg operation fail without cable connected.
so, please do connect the cable when apply this patch to the driver
to make sure these 2bits are cleared by new driver.
The revised code is move to al1c_reset_mac.
SERDES register definition is refined as well.

when do reset MAC, speed/duplex control right should be transferred
to software before do PHY auto-neg -- by bit MASTER_CTRL_SPEED_MODE_SW.
SERDES register definition is refined as well.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoatl1c: remove PHY contrl in atl1c_reset_pcie
Huang, Xiong [Wed, 25 Apr 2012 20:27:11 +0000 (20:27 +0000)]
atl1c: remove PHY contrl in atl1c_reset_pcie

atl1c_reset_phy follows atl1c_reset_pcie in the whole driver,
so, it's unnecessary to add PHY control code in atl1c_reset_pcie.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoatl1c: refine phy-register read/write function
Huang, Xiong [Wed, 25 Apr 2012 20:27:10 +0000 (20:27 +0000)]
atl1c: refine phy-register read/write function

phy register is read/write via MDIO control module ---
that module will be affected by the hibernate status,
to access phy regs in hib stutus, slow frequency clk must
be selected.
To access phy extension register, the MDIO related
registers are refined/updated, a _core function is
re-wroted for both regular PHY regs and extension regs.
existing PHY r/w function is revised based on the _core.
PHY extension registers will be used for the comming
patches.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoatl1c: remove REG_PHY_STATUS
Huang, Xiong [Wed, 25 Apr 2012 20:27:09 +0000 (20:27 +0000)]
atl1c: remove REG_PHY_STATUS

this register is used for l1e(dev=1026)
l1c/l1d/l2cb don't use it.

Signed-off-by: xiong <xiong@qca.qualcomm.com>
Tested-by: Liu David <dwliu@qca.qualcomm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobe2net: Fix FW download for BE
Padmanabh Ratnakar [Wed, 25 Apr 2012 01:47:15 +0000 (01:47 +0000)]
be2net: Fix FW download for BE

Skip flashing a FW component if that component is not present in a
particular FW UFI image.

Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobe2net: Fix wrong status getting returned for MCC commands
Padmanabh Ratnakar [Wed, 25 Apr 2012 01:47:03 +0000 (01:47 +0000)]
be2net: Fix wrong status getting returned for MCC commands

MCC Response CQEs are processed as part of NAPI poll routine and
also synchronously. If MCC completions are consumed by NAPI poll
routine, wrong status is returned to synchronously waiting routine.
Fix this by getting status of MCC command from command response
instead of response CQEs.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobe2net: Fix Lancer statistics
Padmanabh Ratnakar [Wed, 25 Apr 2012 01:46:52 +0000 (01:46 +0000)]
be2net: Fix Lancer statistics

Fix port num sent in command to get stats. Also skip unnecessary
parsing of stats for Lancer.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobe2net: Fix traffic stall INTx mode
Padmanabh Ratnakar [Wed, 25 Apr 2012 01:46:39 +0000 (01:46 +0000)]
be2net: Fix traffic stall INTx mode

EQ is getting armed wrongly in INTx mode as INTx interrupt is taking
some time to deassert. This can cause another interrupt while NAPI is
scheduled and scheduling a NAPI in interrupt does not take effect.
This causes interrupt to be missed and traffic stalls. Fixing this by
preventing wrong arming of EQ.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobe2net: Fix ethtool self test for Lancer
Padmanabh Ratnakar [Wed, 25 Apr 2012 01:46:28 +0000 (01:46 +0000)]
be2net: Fix ethtool self test for Lancer

Lancer does not support DDR self test. Fix ethtool self test by
skipping this test for Lancer.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobe2net: Fix FW download in Lancer
Padmanabh Ratnakar [Wed, 25 Apr 2012 01:46:18 +0000 (01:46 +0000)]
be2net: Fix FW download in Lancer

Increase time given by driver to adapter for completing FW download
to 30 seconds. Also return correct status when FW download times out.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobe2net: Fix VLAN/multicast packet reception
Padmanabh Ratnakar [Wed, 25 Apr 2012 01:46:06 +0000 (01:46 +0000)]
be2net: Fix VLAN/multicast packet reception

VLAN and multicast hardware filters are limited and can get
exhausted in adapters with many PCI functions. If setting
a VLAN or multicast filter fails due to lack of sufficient
hardware resources, these packets get dropped. Fix this by
switching to VLAN or multicast promiscous mode so that these
packets are not dropped.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agomISDN: DSP scheduling fix (version 2)
Karsten Keil [Wed, 25 Apr 2012 20:54:48 +0000 (20:54 +0000)]
mISDN: DSP scheduling fix (version 2)

dsp_spl_jiffies need to be the same datatype as jiffies (which is ulong).
If not, on 64 bit systems it will fallback to schedule the DSP every jiffie
tic as soon jiffies become > 2^32.

Signed-off-by: Karsten Keil <kkeil@linux-pingi.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agomISDN: Fix division by zero
Karsten Keil [Tue, 24 Apr 2012 02:51:51 +0000 (02:51 +0000)]
mISDN: Fix division by zero

If DTMF debug is set and tresh goes under 100, the printk will cause
a division by zero.

Signed-off-by: Karsten Keil <kkeil@linux-pingi.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agomISDN: Fixed hardware bridging/conference check routine of mISDN_dsp.ko.
Andreas Eversberg [Tue, 24 Apr 2012 02:51:50 +0000 (02:51 +0000)]
mISDN: Fixed hardware bridging/conference check routine of mISDN_dsp.ko.

In some cases the hardware bridging/conference (2-n parties) was selected,
but still pure software bridging/conference was used.

Signed-off-by: Andreas Eversberg <jolly@eversberg.eu>
Signed-off-by: Karsten Keil <keil@b1-systems.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agomISDN: Fix NULL pointer bug in if-condition of mISDN_dsp
Andreas Eversberg [Tue, 24 Apr 2012 02:51:49 +0000 (02:51 +0000)]
mISDN: Fix NULL pointer bug in if-condition of mISDN_dsp

Fix a bug (was introduced by a cut & paste error)
in cases when dsp->conf was NULL.

Signed-off-by: Andreas Eversberg <jolly@eversberg.eu>
Signed-off-by: Karsten Keil <keil@b1-systems.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: sock_diag_handler structs can be const
Shan Wei [Tue, 24 Apr 2012 18:21:07 +0000 (18:21 +0000)]
net: sock_diag_handler structs can be const

read only, so change it to const.

Signed-off-by: Shan Wei <davidshan@tencent.com>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoipv6: call consume_skb() in frag/reassembly
Eric Dumazet [Tue, 24 Apr 2012 10:17:59 +0000 (10:17 +0000)]
ipv6: call consume_skb() in frag/reassembly

Some kfree_skb() calls should be replaced by consume_skb() to avoid
drop_monitor/dropwatch false positives.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: dcb: add CEE notify calls
John Fastabend [Fri, 20 Apr 2012 09:49:23 +0000 (09:49 +0000)]
net: dcb: add CEE notify calls

This adds code to trigger CEE events when an APP change or setall
command is made from user space. This simplifies user space code
significantly by creating a single interface to listen on that
works with both firmware and userland agents.

And if we end up with multiple agents this keeps every thing in
sync userland agents, firmware agents, and kernel notifier consumers.

For an example agent that listens for these events see:

https://github.com/jrfastab/cgdcbxd

cgdcbxd is a daemon used to monitor DCB netlink events and manage
the net_prio control group sub-system.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Shmulik Ravid <shmulikr@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agomac80211: Adds clean sdata helper
Andrei Emeltchenko [Tue, 24 Apr 2012 11:18:28 +0000 (14:18 +0300)]
mac80211: Adds clean sdata helper

Adds hepler to clean sdata ieee80211_clean_sdata similar way as
ieee80211_setup_sdata is implemented. The function will be used by other
interfaces later.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Fix IDLE Powersave
Sujith Manoharan [Tue, 24 Apr 2012 04:53:20 +0000 (10:23 +0530)]
ath9k: Fix IDLE Powersave

* PS_WAIT_FOR_TX_ACK is used in network-sleep mode and checking
  it for handling IDLE transitions is incorrect. Fix this.

* RX PCU/DMA engines have to be stopped before setting the chip into
  full-sleep mode - otherwise the chip becomes mute.

* Make things a bit clear by checking explicitly for network-sleep
  mode in the tx() routine and add a couple of debug statements
  to aid PS debugging.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomac80211: fix num_mcast_sta counting issues
Felix Fietkau [Mon, 23 Apr 2012 17:49:03 +0000 (19:49 +0200)]
mac80211: fix num_mcast_sta counting issues

Moving a STA to an AP VLAN prevents num_mcast_sta from being decremented
once the STA leaves, because sta->sdata changes. Fix this by checking
for AP VLANs as well.

Also exclude 4-addr VLAN stations from num_mcast_sta - remote 4-addr
stations ignore 3-address multicast frames anyway. In a typical bridge
configuration they receive the same packets as 4-address unicast.

This patch also fixes clearing the sdata->u.vlan.sta pointer when the
STA is removed from a 4-addr VLAN.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomac80211: rename AP variable num_sta_authorized to num_mcast_sta
Felix Fietkau [Mon, 23 Apr 2012 17:49:02 +0000 (19:49 +0200)]
mac80211: rename AP variable num_sta_authorized to num_mcast_sta

It is only used to test for BSS multicast receivers.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomac80211: check for non-managed interface
Wey-Yi Guy [Mon, 23 Apr 2012 16:30:32 +0000 (09:30 -0700)]
mac80211: check for non-managed interface

Average beacon signal only keep tracked by managed interface,
give warning and return 0 for the others.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agotipc: remove inline instances from C source files.
Paul Gortmaker [Mon, 23 Apr 2012 04:49:13 +0000 (04:49 +0000)]
tipc: remove inline instances from C source files.

Untie gcc's hands and let it do what it wants within the
individual source files.  There are two files, node.c and
port.c -- only the latter effectively changes (gcc-4.5.2).
Objdump shows gcc deciding to not inline port_peernode().

Suggested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoaf_netlink: drop_monitor/dropwatch friendly
Eric Dumazet [Sun, 22 Apr 2012 21:30:29 +0000 (21:30 +0000)]
af_netlink: drop_monitor/dropwatch friendly

Need to consume_skb() instead of kfree_skb() in netlink_dump() and
netlink_unicast_kernel() to avoid false dropwatch positives.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoaf_netlink: cleanups
Eric Dumazet [Sun, 22 Apr 2012 21:30:21 +0000 (21:30 +0000)]
af_netlink: cleanups

netlink_destroy_callback() move to avoid forward reference

CodingStyle cleanups

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: skb_can_coalesce returns a boolean
Eric Dumazet [Mon, 23 Apr 2012 17:48:27 +0000 (17:48 +0000)]
net: skb_can_coalesce returns a boolean

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agotcp: tcp_try_coalesce returns a boolean
Eric Dumazet [Mon, 23 Apr 2012 17:34:36 +0000 (17:34 +0000)]
tcp: tcp_try_coalesce returns a boolean

This clarifies code intention, as suggested by David.

Suggested-by: David Miller <davem@davemloft.net>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: make spd_fill_page() linear argument a bool
Eric Dumazet [Tue, 24 Apr 2012 03:35:04 +0000 (23:35 -0400)]
net: make spd_fill_page() linear argument a bool

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
David S. Miller [Tue, 24 Apr 2012 03:14:36 +0000 (23:14 -0400)]
Merge git://git./linux/kernel/git/davem/net

Fix merge between commit 3adadc08cc1e ("net ax25: Reorder ax25_exit to
remove races") and commit 0ca7a4c87d27 ("net ax25: Simplify and
cleanup the ax25 sysctl handling")

The former moved around the sysctl register/unregister calls, the
later simply removed them.

With help from Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: Use bool and remove inline in skb_splice_bits() code.
David S. Miller [Tue, 24 Apr 2012 03:06:11 +0000 (23:06 -0400)]
net: Use bool and remove inline in skb_splice_bits() code.

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: speedup skb_splice_bits()
Eric Dumazet [Sun, 22 Apr 2012 12:26:16 +0000 (12:26 +0000)]
net: speedup skb_splice_bits()

Commit 35f3d14db (pipe: add support for shrinking and growing pipes)
added a slowdown for splice(socket -> pipe), as we might grow the spd
used in skb_splice_bits() for each skb we process in splice() syscall.

Its not needed since skb lengths are capped. The default on-stack arrays
are more than enough.

Use MAX_SKB_FRAGS instead of PIPE_DEF_BUFFERS to describe the reasonable
limit per skb.

Add coalescing support to help splicing of GRO skbs built from linear
skbs (linked into frag_list)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoMerge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Linus Torvalds [Tue, 24 Apr 2012 02:45:19 +0000 (19:45 -0700)]
Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild

Pull build system failure fix from Michal Marek:
 "This fixes build failure with newer gcc that adds some internal
  symbols that end in "__mod_*_device_table", but are not actually the
  tables themselves."

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  Fix modpost failures in fedora 17

12 years agotcp: introduce tcp_try_coalesce
Eric Dumazet [Mon, 23 Apr 2012 07:11:42 +0000 (07:11 +0000)]
tcp: introduce tcp_try_coalesce

commit c8628155ece3 (tcp: reduce out_of_order memory use) took care of
coalescing tcp segments provided by legacy devices (linear skbs)

We extend this idea to fragged skbs, as their truesize can be heavy.

ixgbe for example uses 256+1024+PAGE_SIZE/2 = 3328 bytes per segment.

Use this coalescing strategy for receive queue too.

This contributes to reduce number of tcp collapses, at minimal cost, and
reduces memory overhead and packets drops.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobnx2x: Update driver version to 1.72.50-0
Barak Witkowski [Mon, 23 Apr 2012 03:05:16 +0000 (03:05 +0000)]
bnx2x: Update driver version to 1.72.50-0

Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobnx2x: remove gro workaround
Dmitry Kravkov [Mon, 23 Apr 2012 03:05:11 +0000 (03:05 +0000)]
bnx2x: remove gro workaround

Removes GRO workaround, as issue is fixed in FW 7.2.51.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agobnx2x: add afex support
Barak Witkowski [Mon, 23 Apr 2012 03:04:46 +0000 (03:04 +0000)]
bnx2x: add afex support

Following patch adds afex multifunction support to the driver (afex
multifunction is based on vntag header) and updates FW version used to 7.2.51.

Support includes the following:

1. Configure vif parameters in firmware (default vlan, vif id, default
   priority, allowed priorities) according to values received from NIC.
2. Configure FW to strip/add default vlan according to afex vlan mode.
3. Notify link up to OS only after vif is fully initialized.
4. Support vif list set/get requests and configure FW accordingly.
5. Supply afex statistics upon request from NIC.
6. Special handling to L2 interface in case of FCoE vif.

Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agomlx4_en: Byte Queue Limit support
Yevgeny Petrilin [Mon, 23 Apr 2012 02:18:50 +0000 (02:18 +0000)]
mlx4_en: Byte Queue Limit support

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agomlx4_en: Moving to Interrupts for TX completions
Yevgeny Petrilin [Mon, 23 Apr 2012 02:18:39 +0000 (02:18 +0000)]
mlx4_en: Moving to Interrupts for TX completions

Moving to interrupts instead of polling fpr TX completions
Avoiding situations where skb can be held in by the driver for
a long time (till timer expires).
The change is also necessary for supporting BQL.

Removing comp_lock that was required because we could handle TX
completions from several contexts: Interrupts, timer, polling.
Now there is only interrupts

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agomlx4_en: Added Ethtool support for TX Interrupt coalescing
Yevgeny Petrilin [Mon, 23 Apr 2012 02:18:33 +0000 (02:18 +0000)]
mlx4_en: Added Ethtool support for TX Interrupt coalescing

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agotcp: sk_add_backlog() is too agressive for TCP
Eric Dumazet [Sun, 22 Apr 2012 23:38:54 +0000 (23:38 +0000)]
tcp: sk_add_backlog() is too agressive for TCP

While investigating TCP performance problems on 10Gb+ links, we found a
tcp sender was dropping lot of incoming ACKS because of sk_rcvbuf limit
in sk_add_backlog(), especially if receiver doesnt use GRO/LRO and sends
one ACK every two MSS segments.

A sender usually tweaks sk_sndbuf, but sk_rcvbuf stays at its default
value (87380), allowing a too small backlog.

A TCP ACK, even being small, can consume nearly same truesize space than
outgoing packets. Using sk_rcvbuf + sk_sndbuf as a limit makes sense and
is fast to compute.

Performance results on netperf, single flow, receiver with disabled
GRO/LRO : 7500 Mbits instead of 6050 Mbits, no more TCPBacklogDrop
increments at sender.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Cc: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet: add a limit parameter to sk_add_backlog()
Eric Dumazet [Sun, 22 Apr 2012 23:34:26 +0000 (23:34 +0000)]
net: add a limit parameter to sk_add_backlog()

sk_add_backlog() & sk_rcvqueues_full() hard coded sk_rcvbuf as the
memory limit. We need to make this limit a parameter for TCP use.

No functional change expected in this patch, all callers still using the
old sk_rcvbuf limit.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Tom Herbert <therbert@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Cc: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agonet ax25: Fix the build when sysctl support is disabled.
Eric W. Biederman [Mon, 23 Apr 2012 14:25:49 +0000 (14:25 +0000)]
net ax25: Fix the build when sysctl support is disabled.

Randy Dunlap <rdunlap@xenotime.net> reported:

> On 04/23/2012 12:07 AM, Stephen Rothwell wrote:
>
>> Hi all,
>>
>> Changes since 20120420:
>
>
> include/net/ax25.h:447:75: error: expected ';' before '}' token
>
> static inline int ax25_register_dev_sysctl(ax25_dev *ax25_dev) { return 0 };
> static inline void ax25_unregister_dev_sysctl(ax25_dev *ax25_dev) {};
>
> First function:  move ';' inside braces.
> Second function:  drop the ';'.

Put the semicolons where it makes sense.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoMerge tag 'md-3.4-fixes' of git://neil.brown.name/md
Linus Torvalds [Tue, 24 Apr 2012 01:25:01 +0000 (18:25 -0700)]
Merge tag 'md-3.4-fixes' of git://neil.brown.name/md

Pull a few more md bug fixes from NeilBrown:
 "2 are tagged for -stable, one being for a fairly serious bug that can
  corrupt metadata and make it hard to recovery an array.  The other is
  for a more recent regression since 3.3"

* tag 'md-3.4-fixes' of git://neil.brown.name/md:
  md: fix possible corruption of array metadata on shutdown.
  md: don't call ->add_disk unless there is good reason.
  DM RAID: Use safe version of rdev_for_each

12 years agoMerge tag 'dlm-fixes-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland...
Linus Torvalds [Tue, 24 Apr 2012 01:22:42 +0000 (18:22 -0700)]
Merge tag 'dlm-fixes-3.4' of git://git./linux/kernel/git/teigland/linux-dlm

Pull dlm fixes from David Teigland:
 "This includes one short patch fixing the behavior of the QUECVT flag,
  which the gfs2 folks are waiting on."

* tag 'dlm-fixes-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: fix QUECVT when convert queue is empty

12 years agomm: fix s390 BUG by __set_page_dirty_no_writeback on swap
Hugh Dickins [Mon, 23 Apr 2012 18:14:50 +0000 (11:14 -0700)]
mm: fix s390 BUG by __set_page_dirty_no_writeback on swap

Mel reports a BUG_ON(slot == NULL) in radix_tree_tag_set() on s390
3.0.13: called from __set_page_dirty_nobuffers() when page_remove_rmap()
tries to transfer dirty flag from s390 storage key to struct page and
radix_tree.

That would be because of reclaim's shrink_page_list() calling
add_to_swap() on this page at the same time: first PageSwapCache is set
(causing page_mapping(page) to appear as &swapper_space), then
page->private set, then tree_lock taken, then page inserted into
radix_tree - so there's an interval before taking the lock when the
radix_tree slot is empty.

We could fix this by moving __add_to_swap_cache()'s spin_lock_irq up
before the SetPageSwapCache.  But a better fix is simply to do what's
five years overdue: Ken Chen introduced __set_page_dirty_no_writeback()
(if !PageDirty TestSetPageDirty) for tmpfs to skip all the radix_tree
overhead, and swap is just the same - it ignores the radix_tree tag, and
does not participate in dirty page accounting, so should be using
__set_page_dirty_no_writeback() too.

s390 testing now confirms that this does indeed fix the problem.

Reported-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ken Chen <kenchen@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agomd: fix possible corruption of array metadata on shutdown.
NeilBrown [Tue, 24 Apr 2012 00:23:16 +0000 (10:23 +1000)]
md: fix possible corruption of array metadata on shutdown.

commit c744a65c1e2d59acc54333ce8
  md: don't set md arrays to readonly on shutdown.

removed the possibility of a 'BUG' when data is written to an array
that has just been switched to read-only, but also introduced the
possibility that the array metadata could be corrupted.

If, when md_notify_reboot gets the mddev lock, the array is
in a state where it is assembled but hasn't been started (as can
happen if the personality module is not available, or in other unusual
situations), then incorrect metadata will be written out making it
impossible to re-assemble the array.

So only call __md_stop_writes() if the array has actually been
activated.

This patch is needed for any stable kernel which has had the above
commit applied.

Cc: stable@vger.kernel.org
Reported-by: Christoph Nelles <evilazrael@evilazrael.de>
Signed-off-by: NeilBrown <neilb@suse.de>
12 years agomd: don't call ->add_disk unless there is good reason.
NeilBrown [Tue, 24 Apr 2012 00:23:14 +0000 (10:23 +1000)]
md: don't call ->add_disk unless there is good reason.

Commit 7bfec5f35c68121e7b18

   md/raid5: If there is a spare and a want_replacement device, start replacement.

cause md_check_recovery to call ->add_disk much more often.
Instead of only when the array is degraded, it is now called whenever
md_check_recovery finds anything useful to do, which includes
updating the metadata for clean<->dirty transition.
This causes unnecessary work, and causes info messages from ->add_disk
to be reported much too often.

So refine md_check_recovery to only do any actual recovery checking
(including ->add_disk) if MD_RECOVERY_NEEDED is set.

This fix is suitable for 3.3.y:

Cc: stable@vger.kernel.org
Reported-by: Jan Ceuleers <jan.ceuleers@computer.org>
Signed-off-by: NeilBrown <neilb@suse.de>
12 years agoDM RAID: Use safe version of rdev_for_each
Jonathan Brassow [Tue, 24 Apr 2012 00:23:13 +0000 (10:23 +1000)]
DM RAID: Use safe version of rdev_for_each

Fix segfault caused by using rdev_for_each instead of rdev_for_each_safe

Commit dafb20fa34320a472deb7442f25a0c086e0feb33 mistakenly replaced a safe
iterator with an unsafe one when making some macro changes.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
12 years agonet sysctl: Add place holder functions for when sysctl support is compiled out of...
Eric W. Biederman [Mon, 23 Apr 2012 12:13:02 +0000 (12:13 +0000)]
net sysctl: Add place holder functions for when sysctl support is compiled out of the kernel.

Randy Dunlap <rdunlap@xenotime.net> reported:
> On 04/23/2012 12:07 AM, Stephen Rothwell wrote:
>
>> Hi all,
>>
>> Changes since 20120420:
>
>
>
> ERROR: "unregister_net_sysctl_table" [net/phonet/phonet.ko] undefined!
> ERROR: "register_net_sysctl" [net/phonet/phonet.ko] undefined!
>
> when CONFIG_SYSCTL is not enabled.

Add static inline stub functions to gracefully handle the case when sysctl
support is not present.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoiwlwifi: use new mac80211 queue scheme
Johannes Berg [Tue, 17 Apr 2012 14:39:03 +0000 (07:39 -0700)]
iwlwifi: use new mac80211 queue scheme

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
12 years agoiwlwifi: clean up module parameters
Johannes Berg [Tue, 17 Apr 2012 14:36:30 +0000 (07:36 -0700)]
iwlwifi: clean up module parameters

For now at least, all module parameters should be
with the core functionality, so move them there,
while at it rename to iwlwifi_mod_params. Also
rename iwl-shared.h to iwl-modparams.h to reflect
the real contents.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
12 years agoiwlwifi: revert workaround to restore 1000 rx throughput
Don Fry [Fri, 23 Mar 2012 22:41:07 +0000 (15:41 -0700)]
iwlwifi: revert workaround to restore 1000 rx throughput

A workaround in commit c0486b7ccc5 resulted in a 40% drop in receive
throughput in order to fix a transmit problem.  The transmit problem
no longer occurs, so restore the receive throughput.

Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
12 years agoiwlwifi: use direct calls for transport free
Johannes Berg [Thu, 12 Apr 2012 13:24:30 +0000 (06:24 -0700)]
iwlwifi: use direct calls for transport free

Since the transport allocates and frees itself in
the transport specific code, there's no need for
virtual functions for it. Remove the free method
and call the correct functions directly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
12 years agoiwlwifi: clean up some hw file includes
Johannes Berg [Tue, 3 Apr 2012 18:57:59 +0000 (20:57 +0200)]
iwlwifi: clean up some hw file includes

We can't get rid of everything yet due to
the BT definitions that I'm not quite sure
yet how to handle, but we can get rid of
most unneeded includes.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
12 years agoiwlwifi: move OTP defines
Johannes Berg [Tue, 3 Apr 2012 18:49:20 +0000 (20:49 +0200)]
iwlwifi: move OTP defines

Since the PCI core shouldn't include the
iwl-eeprom.h header file, move the OTP
definitions into iwl-agn-hw.h which can
be included.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
12 years agoiwlwifi: move antenna definitions to config
Johannes Berg [Tue, 3 Apr 2012 18:38:44 +0000 (20:38 +0200)]
iwlwifi: move antenna definitions to config

Since they're used in the config, they
should be declared in iwl-config.h.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
12 years agoiwlwifi: move eeprom versions to HW files
Johannes Berg [Tue, 3 Apr 2012 18:41:07 +0000 (20:41 +0200)]
iwlwifi: move eeprom versions to HW files

The hardware files belong to the core PCI
functionality, but the eeprom header file
mixes higher-level functionality and the
defines, so move out the specific defines
and put them into the appropriate HW files
instead.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
12 years agoiwlwifi: move watchdog definitions to config
Johannes Berg [Tue, 3 Apr 2012 18:38:44 +0000 (20:38 +0200)]
iwlwifi: move watchdog definitions to config

Since they're used in the config, they
should be declared in iwl-config.h.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
12 years agoiwlwifi: move PLCP defines to config
Johannes Berg [Tue, 3 Apr 2012 18:34:46 +0000 (20:34 +0200)]
iwlwifi: move PLCP defines to config

Since they're used in the config, they
should be declared in iwl-config.h.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
12 years agoiwlwifi: move driver defines to iwl-drv.h
Johannes Berg [Tue, 3 Apr 2012 23:44:37 +0000 (16:44 -0700)]
iwlwifi: move driver defines to iwl-drv.h

These defines will have to be shared
between modules, but they seem better
placed in iwl-drv.h than iwl-shared.h.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
12 years agoiwlwifi: remove duplicate iwlagn_mod_params declaration
Johannes Berg [Tue, 3 Apr 2012 23:42:03 +0000 (16:42 -0700)]
iwlwifi: remove duplicate iwlagn_mod_params declaration

We only need one declaration, not multiple.
Keep the one in iwl-shared.h, which will
probably be renamed to iwl-modparams.h at
some point in the future.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
12 years agoiwlwifi: remove TX/RX frame statistics
Johannes Berg [Mon, 23 Apr 2012 21:25:51 +0000 (14:25 -0700)]
iwlwifi: remove TX/RX frame statistics

Keeping statistics per frame type really isn't
very useful, and needs a huge amount of code
so remove it. Since that is the only thing in
iwl-core.{c,h} now, those files can be killed.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
12 years agobe2net: fix ethtool get settings
Ajit Khaparde [Sat, 21 Apr 2012 18:53:22 +0000 (18:53 +0000)]
be2net: fix ethtool get settings

ethtool get settings was not displaying all the settings correctly.
use the get_phy_info to get more information about the PHY to fix this.

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoiwlwifi: remove traffic log
Johannes Berg [Tue, 3 Apr 2012 23:35:41 +0000 (16:35 -0700)]
iwlwifi: remove traffic log

This is superseded by tracing and no longer needed.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
12 years agoiwlwifi: move iwl_cmd_echo_test
Johannes Berg [Mon, 2 Apr 2012 13:15:58 +0000 (15:15 +0200)]
iwlwifi: move iwl_cmd_echo_test

The function can be static with the only user.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
12 years agoiwlwifi: move TIME_UNIT
Johannes Berg [Mon, 2 Apr 2012 13:14:48 +0000 (15:14 +0200)]
iwlwifi: move TIME_UNIT

We're getting rid of iwl-core.h, move TIME_UNIT out.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
12 years agoiwlwifi: remove bt_siso_mode declaration
Johannes Berg [Mon, 2 Apr 2012 13:09:26 +0000 (15:09 +0200)]
iwlwifi: remove bt_siso_mode declaration

That variable doesn't exist anywhere.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
12 years agoiwlwifi: include net/mac80211.h to avoid compiler error
Wey-Yi Guy [Tue, 3 Apr 2012 23:23:37 +0000 (16:23 -0700)]
iwlwifi: include net/mac80211.h to avoid compiler error

without the include, kernel compiling will fail, but not compat.
this patch need to be merge with iwlwifi-clean-up-iwl-shared.h-includes.patch

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>