Linus Torvalds [Tue, 15 Mar 2016 01:43:51 +0000 (18:43 -0700)]
Merge branch 'ras-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull RAS updates from Ingo Molnar:
"Various RAS updates:
- AMD MCE support updates for future CPUs, fixes and 'SMCA' (Scalable
MCA) error decoding support (Aravind Gopalakrishnan)
- x86 memcpy_mcsafe() support, to enable smart(er) hardware error
recovery in NVDIMM drivers, based on an extension of the x86
exception handling code. (Tony Luck)"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
EDAC/sb_edac: Fix computation of channel address
x86/mm, x86/mce: Add memcpy_mcsafe()
x86/mce/AMD: Document some functionality
x86/mce: Clarify comments regarding deferred error
x86/mce/AMD: Fix logic to obtain block address
x86/mce/AMD, EDAC: Enable error decoding of Scalable MCA errors
x86/mce: Move MCx_CONFIG MSR definitions
x86/mce: Check for faults tagged in EXTABLE_CLASS_FAULT exception table entries
x86/mm: Expand the exception table logic to allow new handling options
x86/mce/AMD: Set MCAX Enable bit
x86/mce/AMD: Carve out threshold block preparation
x86/mce/AMD: Fix LVT offset configuration for thresholding
x86/mce/AMD: Reduce number of blocks scanned per bank
x86/mce/AMD: Do not perform shared bank check for future processors
x86/mce: Fix order of AMD MCE init function call
Linus Torvalds [Tue, 15 Mar 2016 00:58:53 +0000 (17:58 -0700)]
Merge branch 'perf-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Main kernel side changes:
- Big reorganization of the x86 perf support code. The old code grew
organically deep inside arch/x86/kernel/cpu/perf* and its naming
became somewhat messy.
The new location is under arch/x86/events/, using the following
cleaner hierarchy of source code files:
perf/x86: Move perf_event.c .................. => x86/events/core.c
perf/x86: Move perf_event_amd.c .............. => x86/events/amd/core.c
perf/x86: Move perf_event_amd_ibs.c .......... => x86/events/amd/ibs.c
perf/x86: Move perf_event_amd_iommu.[ch] ..... => x86/events/amd/iommu.[ch]
perf/x86: Move perf_event_amd_uncore.c ....... => x86/events/amd/uncore.c
perf/x86: Move perf_event_intel_bts.c ........ => x86/events/intel/bts.c
perf/x86: Move perf_event_intel.c ............ => x86/events/intel/core.c
perf/x86: Move perf_event_intel_cqm.c ........ => x86/events/intel/cqm.c
perf/x86: Move perf_event_intel_cstate.c ..... => x86/events/intel/cstate.c
perf/x86: Move perf_event_intel_ds.c ......... => x86/events/intel/ds.c
perf/x86: Move perf_event_intel_lbr.c ........ => x86/events/intel/lbr.c
perf/x86: Move perf_event_intel_pt.[ch] ...... => x86/events/intel/pt.[ch]
perf/x86: Move perf_event_intel_rapl.c ....... => x86/events/intel/rapl.c
perf/x86: Move perf_event_intel_uncore.[ch] .. => x86/events/intel/uncore.[ch]
perf/x86: Move perf_event_intel_uncore_nhmex.c => x86/events/intel/uncore_nmhex.c
perf/x86: Move perf_event_intel_uncore_snb.c => x86/events/intel/uncore_snb.c
perf/x86: Move perf_event_intel_uncore_snbep.c => x86/events/intel/uncore_snbep.c
perf/x86: Move perf_event_knc.c .............. => x86/events/intel/knc.c
perf/x86: Move perf_event_p4.c ............... => x86/events/intel/p4.c
perf/x86: Move perf_event_p6.c ............... => x86/events/intel/p6.c
perf/x86: Move perf_event_msr.c .............. => x86/events/msr.c
(Borislav Petkov)
- Update various x86 PMU constraint and hw support details (Stephane
Eranian)
- Optimize kprobes for BPF execution (Martin KaFai Lau)
- Rewrite, refactor and fix the Intel uncore PMU driver code (Thomas
Gleixner)
- Rewrite, refactor and fix the Intel RAPL PMU code (Thomas Gleixner)
- Various fixes and smaller cleanups.
There are lots of perf tooling updates as well. A few highlights:
perf report/top:
- Hierarchy histogram mode for 'perf top' and 'perf report',
showing multiple levels, one per --sort entry: (Namhyung Kim)
On a mostly idle system:
# perf top --hierarchy -s comm,dso
Then expand some levels and use 'P' to take a snapshot:
# cat perf.hist.0
- 92.32% perf
58.20% perf
22.29% libc-2.22.so
5.97% [kernel]
4.18% libelf-0.165.so
1.69% [unknown]
- 4.71% qemu-system-x86
3.10% [kernel]
1.60% qemu-system-x86_64 (deleted)
+ 2.97% swapper
#
- Add 'L' hotkey to dynamicly set the percent threshold for
histogram entries and callchains, i.e. dynamicly do what the
--percent-limit command line option to 'top' and 'report' does.
(Namhyung Kim)
perf mem:
- Allow specifying events via -e in 'perf mem record', also listing
what events can be specified via 'perf mem record -e list' (Jiri
Olsa)
perf record:
- Add 'perf record' --all-user/--all-kernel options, so that one
can tell that all the events in the command line should be
restricted to the user or kernel levels (Jiri Olsa), i.e.:
perf record -e cycles:u,instructions:u
is equivalent to:
perf record --all-user -e cycles,instructions
- Make 'perf record' collect CPU cache info in the perf.data file header:
$ perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
$ perf report --header-only -I | tail -10 | head -8
# CPU cache info:
# L1 Data 32K [0-1]
# L1 Instruction 32K [0-1]
# L1 Data 32K [2-3]
# L1 Instruction 32K [2-3]
# L2 Unified 256K [0-1]
# L2 Unified 256K [2-3]
# L3 Unified 4096K [0-3]
Will be used in 'perf c2c' and eventually in 'perf diff' to
allow, for instance running the same workload in multiple
machines and then when using 'diff' show the hardware difference.
(Jiri Olsa)
- Improved support for Java, using the JVMTI agent library to do
jitdumps that then will be inserted in synthesized
PERF_RECORD_MMAP2 events via 'perf inject' pointed to synthesized
ELF files stored in ~/.debug and keyed with build-ids, to allow
symbol resolution and even annotation with source line info, see
the changeset comments to see how to use it (Stephane Eranian)
perf script/trace:
- Decode data_src values (e.g. perf.data files generated by 'perf
mem record') in 'perf script': (Jiri Olsa)
# perf script
perf 693 [1] 4.088652: 1 cpu/mem-loads,ldlat=30/P:
ffff88007d0b0f40 68100142 L1 hit|SNP None|TLB L1 or L2 hit|LCK No <SNIP>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
- Improve support to 'data_src', 'weight' and 'addr' fields in
'perf script' (Jiri Olsa)
- Handle empty print fmts in 'perf script -s' i.e. when running
python or perl scripts (Taeung Song)
perf stat:
- 'perf stat' now shows shadow metrics (insn per cycle, etc) in
interval mode too. E.g:
# perf stat -I 1000 -e instructions,cycles sleep 1
# time counts unit events
1.
000215928 519,620 instructions # 0.69 insn per cycle
1.
000215928 752,003 cycles
<SNIP>
- Port 'perf kvm stat' to PowerPC (Hemant Kumar)
- Implement CSV metrics output in 'perf stat' (Andi Kleen)
perf BPF support:
- Support converting data from bpf events in 'perf data' (Wang Nan)
- Print bpf-output events in 'perf script': (Wang Nan).
# perf record -e bpf-output/no-inherit,name=evt/ -e ./test_bpf_output_3.c/map:channel.event=evt/ usleep 1000
# perf script
usleep 4882 21384.532523: evt:
ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
#
- Add API to set values of map entries in a BPF object, be it
individual map slots or ranges (Wang Nan)
- Introduce support for the 'bpf-output' event (Wang Nan)
- Add glue to read perf events in a BPF program (Wang Nan)
- Improve support for bpf-output events in 'perf trace' (Wang Nan)
... and tons of other changes as well - see the shortlog and git log
for details!"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (342 commits)
perf stat: Add --metric-only support for -A
perf stat: Implement --metric-only mode
perf stat: Document CSV format in manpage
perf hists browser: Check sort keys before hot key actions
perf hists browser: Allow thread filtering for comm sort key
perf tools: Add sort__has_comm variable
perf tools: Recalc total periods using top-level entries in hierarchy
perf tools: Remove nr_sort_keys field
perf hists browser: Cleanup hist_browser__fprintf_hierarchy_entry()
perf tools: Remove hist_entry->fmt field
perf tools: Fix command line filters in hierarchy mode
perf tools: Add more sort entry check functions
perf tools: Fix hist_entry__filter() for hierarchy
perf jitdump: Build only on supported archs
tools lib traceevent: Add '~' operation within arg_num_eval()
perf tools: Omit unnecessary cast in perf_pmu__parse_scale
perf tools: Pass perf_hpp_list all the way through setup_sort_list
perf tools: Fix perf script python database export crash
perf jitdump: DWARF is also needed
perf bench mem: Prepare the x86-64 build for upstream memcpy_mcsafe() changes
...
Linus Torvalds [Mon, 14 Mar 2016 23:58:50 +0000 (16:58 -0700)]
Merge branch 'mm-readonly-for-linus' of git://git./linux/kernel/git/tip/tip
Pull read-only kernel memory updates from Ingo Molnar:
"This tree adds two (security related) enhancements to the kernel's
handling of read-only kernel memory:
- extend read-only kernel memory to a new class of formerly writable
kernel data: 'post-init read-only memory' via the __ro_after_init
attribute, and mark the ARM and x86 vDSO as such read-only memory.
This kind of attribute can be used for data that requires a once
per bootup initialization sequence, but is otherwise never modified
after that point.
This feature was based on the work by PaX Team and Brad Spengler.
(by Kees Cook, the ARM vDSO bits by David Brown.)
- make CONFIG_DEBUG_RODATA always enabled on x86 and remove the
Kconfig option. This simplifies the kernel and also signals that
read-only memory is the default model and a first-class citizen.
(Kees Cook)"
* 'mm-readonly-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ARM/vdso: Mark the vDSO code read-only after init
x86/vdso: Mark the vDSO code read-only after init
lkdtm: Verify that '__ro_after_init' works correctly
arch: Introduce post-init read-only memory
x86/mm: Always enable CONFIG_DEBUG_RODATA and remove the Kconfig option
mm/init: Add 'rodata=off' boot cmdline parameter to disable read-only kernel mappings
asm-generic: Consolidate mark_rodata_ro()
Linus Torvalds [Mon, 14 Mar 2016 23:31:41 +0000 (16:31 -0700)]
Merge branch 'mm-pat-for-linus' of git://git./linux/kernel/git/tip/tip
Pull dma_*_writecombine rename from Ingo Molnar:
"Rename dma_*_writecombine() to dma_*_wc()
This is a tree-wide API rename, to move the dma_*() write-combining
APIs closer in name to their usual API families. (The old API names
are kept as compatibility wrappers to not introduce extra breakage.)
The patch was Coccinelle generated"
* 'mm-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
dma, mm/pat: Rename dma_*_writecombine() to dma_*_wc()
Linus Torvalds [Mon, 14 Mar 2016 22:50:44 +0000 (15:50 -0700)]
Merge branch 'locking-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking changes from Ingo Molnar:
"Various updates:
- Futex scalability improvements: remove page lock use for shared
futex get_futex_key(), which speeds up 'perf bench futex hash'
benchmarks by over 40% on a 60-core Westmere. This makes anon-mem
shared futexes perform close to private futexes. (Mel Gorman)
- lockdep hash collision detection and fix (Alfredo Alvarez
Fernandez)
- lockdep testing enhancements (Alfredo Alvarez Fernandez)
- robustify lockdep init by using hlists (Andrew Morton, Andrey
Ryabinin)
- mutex and csd_lock micro-optimizations (Davidlohr Bueso)
- small x86 barriers tweaks (Michael S Tsirkin)
- qspinlock updates (Waiman Long)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
locking/csd_lock: Use smp_cond_acquire() in csd_lock_wait()
locking/csd_lock: Explicitly inline csd_lock*() helpers
futex: Replace barrier() in unqueue_me() with READ_ONCE()
locking/lockdep: Detect chain_key collisions
locking/lockdep: Prevent chain_key collisions
tools/lib/lockdep: Fix link creation warning
tools/lib/lockdep: Add tests for AA and ABBA locking
tools/lib/lockdep: Add userspace version of READ_ONCE()
tools/lib/lockdep: Fix the build on recent kernels
locking/qspinlock: Move __ARCH_SPIN_LOCK_UNLOCKED to qspinlock_types.h
locking/mutex: Allow next waiter lockless wakeup
locking/pvqspinlock: Enable slowpath locking count tracking
locking/qspinlock: Use smp_cond_acquire() in pending code
locking/pvqspinlock: Move lock stealing count tracking code into pv_queued_spin_steal_lock()
locking/mcs: Fix mcs_spin_lock() ordering
futex: Remove requirement for lock_page() in get_futex_key()
futex: Rename barrier references in ordering guarantees
locking/atomics: Update comment about READ_ONCE() and structures
locking/lockdep: Eliminate lockdep_init()
locking/lockdep: Convert hash tables to hlists
...
Linus Torvalds [Mon, 14 Mar 2016 22:15:51 +0000 (15:15 -0700)]
Merge branch 'core-resources-for-linus' of git://git./linux/kernel/git/tip/tip
Pull ram resource handling changes from Ingo Molnar:
"Core kernel resource handling changes to support NVDIMM error
injection.
This tree introduces a new I/O resource type, IORESOURCE_SYSTEM_RAM,
for System RAM while keeping the current IORESOURCE_MEM type bit set
for all memory-mapped ranges (including System RAM) for backward
compatibility.
With this resource flag it no longer takes a strcmp() loop through the
resource tree to find "System RAM" resources.
The new resource type is then used to extend ACPI/APEI error injection
facility to also support NVDIMM"
* 'core-resources-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ACPI/EINJ: Allow memory error injection to NVDIMM
resource: Kill walk_iomem_res()
x86/kexec: Remove walk_iomem_res() call with GART type
x86, kexec, nvdimm: Use walk_iomem_res_desc() for iomem search
resource: Add walk_iomem_res_desc()
memremap: Change region_intersects() to take @flags and @desc
arm/samsung: Change s3c_pm_run_res() to use System RAM type
resource: Change walk_system_ram() to use System RAM type
drivers: Initialize resource entry to zero
xen, mm: Set IORESOURCE_SYSTEM_RAM to System RAM
kexec: Set IORESOURCE_SYSTEM_RAM for System RAM
arch: Set IORESOURCE_SYSTEM_RAM flag for System RAM
ia64: Set System RAM type and descriptor
x86/e820: Set System RAM type and descriptor
resource: Add I/O resource descriptor
resource: Handle resource flags properly
resource: Add System RAM resource type
Linus Torvalds [Mon, 14 Mar 2016 04:28:54 +0000 (21:28 -0700)]
Linux 4.5
Linus Torvalds [Sun, 13 Mar 2016 20:04:46 +0000 (13:04 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"Another round of MIPS fixes for 4.5:
- Fix JZ4780 build with DEBUG_ZBOOT and MACH_JZ4780
- Fix build with DEBUG_ZBOOT and MACH_JZ4780
- Fix issue with uninitialised temp_foreign_map
- Fix awk regex compile failure with certain versions of awk. At
this time, the sole user, ld-ifversion, is only used on MIPS"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: smp.c: Fix uninitialised temp_foreign_map
MIPS: Fix build error when SMP is used without GIC
ld-version: Fix awk regex compile failure
MIPS: Fix build with DEBUG_ZBOOT and MACH_JZ4780
James Hogan [Fri, 4 Mar 2016 10:10:51 +0000 (10:10 +0000)]
MIPS: smp.c: Fix uninitialised temp_foreign_map
When calculate_cpu_foreign_map() recalculates the cpu_foreign_map
cpumask it uses the local variable temp_foreign_map without initialising
it to zero. Since the calculation only ever sets bits in this cpumask
any existing bits at that memory location will remain set and find their
way into cpu_foreign_map too. This could potentially lead to cache
operations suboptimally doing smp calls to multiple VPEs in the same
core, even though the VPEs share primary caches.
Therefore initialise temp_foreign_map using cpumask_clear() before use.
Fixes:
cccf34e9411c ("MIPS: c-r4k: Fix cache flushing for MT cores")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12759/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Hauke Mehrtens [Sun, 6 Mar 2016 21:28:56 +0000 (22:28 +0100)]
MIPS: Fix build error when SMP is used without GIC
The MIPS_GIC_IPI should only be selected when MIPS_GIC is also
selected, otherwise it results in a compile error. smp-gic.c uses some
functions from include/linux/irqchip/mips-gic.h like
plat_ipi_call_int_xlate() which are only added to the header file when
MIPS_GIC is set. The Lantiq SoC does not use the GIC, but supports SMP.
The calls top the functions from smp-gic.c are already protected by
some #ifdefs
The first part of this was introduced in commit
72e20142b2bf ("MIPS:
Move GIC IPI functions out of smp-cmp.c")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: stable@vger.kernel.org # v3.15+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12774/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
James Hogan [Tue, 8 Mar 2016 16:47:53 +0000 (16:47 +0000)]
ld-version: Fix awk regex compile failure
The ld-version.sh script fails on some versions of awk with the
following error, resulting in build failures for MIPS:
awk: scripts/ld-version.sh: line 4: regular expression compile failed (missing '(')
This is due to the regular expression ".*)", meant to strip off the
beginning of the ld version string up to the close bracket, however
brackets have a meaning in regular expressions, so lets escape it so
that awk doesn't expect a corresponding open bracket.
Fixes:
ccbef1674a15 ("Kbuild, lto: add ld-version and ld-ifversion ...")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: Michal Marek <mmarek@suse.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kbuild@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # 4.4.x-
Patchwork: https://patchwork.linux-mips.org/patch/12838/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Aaro Koskinen [Mon, 7 Mar 2016 22:06:36 +0000 (00:06 +0200)]
MIPS: Fix build with DEBUG_ZBOOT and MACH_JZ4780
Ingenic SoC declares ZBOOT support, but debug definitions are missing
for MACH_JZ4780 resulting in a build failure when DEBUG_ZBOOT is set.
The UART addresses are same as with JZ4740, so fix by covering JZ4780
with those as well.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12830/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Linus Torvalds [Sun, 13 Mar 2016 04:18:54 +0000 (20:18 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block merge fix from Jens Axboe.
This fixes the block segment counting bug and resulting sg overrun
reported by Kent Overstreet, introduced with the last block pull.
* 'for-linus' of git://git.kernel.dk/linux-block:
block: don't optimize for non-cloned bio in bio_get_last_bvec()
Linus Torvalds [Sun, 13 Mar 2016 04:09:25 +0000 (20:09 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"This fixes 3 FPU handling related bugs, an EFI boot crash and a
runtime warning.
The EFI fix arrived late but I didn't want to delay it to after v4.5
because the effects are pretty bad for the systems that are affected
by it"
[ Actually, I don't think the EFI fix really matters yet, because we
haven't switched to the separate EFI page tables in mainline yet ]
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Fix boot crash by always mapping boot service regions into new EFI page tables
x86/fpu: Fix eager-FPU handling on legacy FPU machines
x86/delay: Avoid preemptible context checks in delay_mwaitx()
x86/fpu: Revert ("x86/fpu: Disable AVX when eagerfpu is off")
x86/fpu: Fix 'no387' regression
Linus Torvalds [Sun, 13 Mar 2016 01:14:07 +0000 (17:14 -0800)]
Merge git://git./linux/kernel/git/nab/target-pending
Pull SCSI target bug fix from Nicholas Bellinger:
"Here is an outstanding target-core bug-fix for v4.5 code."
This patch addresses a recent Task Management (TMR) regression related
to larger set of multi-port LUN_RESET bug-fixes in v4.5-rc5.
It drops a left-over target_put_sess_cmd() of se_cmd->cmd_kref within
ABORT_TASK failure path, once a se_cmd descriptor has already
completed posting response to fabric driver logic, and must be skipped
during normal ABORT_TASK se_cmd->tag lookup"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: Drop incorrect ABORT_TASK put for completed commands
Ming Lei [Sat, 12 Mar 2016 14:56:19 +0000 (22:56 +0800)]
block: don't optimize for non-cloned bio in bio_get_last_bvec()
For !BIO_CLONED bio, we can use .bi_vcnt safely, but it
doesn't mean we can just simply return .bi_io_vec[.bi_vcnt - 1]
because the start postion may have been moved in the middle of
the bvec, such as splitting in the middle of bvec.
Fixes:
7bcd79ac50d9(block: bio: introduce helpers to get the 1st and last bvec)
Cc: stable@vger.kernel.org
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Matt Fleming [Fri, 11 Mar 2016 11:19:23 +0000 (11:19 +0000)]
x86/efi: Fix boot crash by always mapping boot service regions into new EFI page tables
Some machines have EFI regions in page zero (physical address
0x00000000) and historically that region has been added to the e820
map via trim_bios_range(), and ultimately mapped into the kernel page
tables. It was not mapped via efi_map_regions() as one would expect.
Alexis reports that with the new separate EFI page tables some boot
services regions, such as page zero, are not mapped. This triggers an
oops during the SetVirtualAddressMap() runtime call.
For the EFI boot services quirk on x86 we need to memblock_reserve()
boot services regions until after SetVirtualAddressMap(). Doing that
while respecting the ownership of regions that may have already been
reserved by the kernel was the motivation behind this commit:
7d68dc3f1003 ("x86, efi: Do not reserve boot services regions within reserved areas")
That patch was merged at a time when the EFI runtime virtual mappings
were inserted into the kernel page tables as described above, and the
trick of setting ->numpages (and hence the region size) to zero to
track regions that should not be freed in efi_free_boot_services()
meant that we never mapped those regions in efi_map_regions(). Instead
we were relying solely on the existing kernel mappings.
Now that we have separate page tables we need to make sure the EFI
boot services regions are mapped correctly, even if someone else has
already called memblock_reserve(). Instead of stashing a tag in
->numpages, set the EFI_MEMORY_RUNTIME bit of ->attribute. Since it
generally makes no sense to mark a boot services region as required at
runtime, it's pretty much guaranteed the firmware will not have
already set this bit.
For the record, the specific circumstances under which Alexis
triggered this bug was that an EFI runtime driver on his machine was
responding to the EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE event during
SetVirtualAddressMap().
The event handler for this driver looks like this,
sub rsp,0x28
lea rdx,[rip+0x2445] # 0xaa948720
mov ecx,0x4
call func_aa9447c0 ; call to ConvertPointer(4, & 0xaa948720)
mov r11,QWORD PTR [rip+0x2434] # 0xaa948720
xor eax,eax
mov BYTE PTR [r11+0x1],0x1
add rsp,0x28
ret
Which is pretty typical code for an EVT_SIGNAL_VIRTUAL_ADDRESS_CHANGE
handler. The "mov r11, QWORD PTR [rip+0x2424]" was the faulting
instruction because ConvertPointer() was being called to convert the
address 0x0000000000000000, which when converted is left unchanged and
remains 0x0000000000000000.
The output of the oops trace gave the impression of a standard NULL
pointer dereference bug, but because we're accessing physical
addresses during ConvertPointer(), it wasn't. EFI boot services code
is stored at that address on Alexis' machine.
Reported-by: Alexis Murzeau <amurzeau@gmail.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raphael Hertzog <hertzog@debian.org>
Cc: Roger Shimizu <rogershimizu@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1457695163-29632-2-git-send-email-matt@codeblueprint.co.uk
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=815125
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Borislav Petkov [Fri, 11 Mar 2016 11:32:06 +0000 (12:32 +0100)]
x86/fpu: Fix eager-FPU handling on legacy FPU machines
i486 derived cores like Intel Quark support only the very old,
legacy x87 FPU (FSAVE/FRSTOR, CPUID bit FXSR is not set), and
our FPU code wasn't handling the saving and restoring there
properly in the 'eagerfpu' case.
So after we made eagerfpu the default for all CPU types:
58122bf1d856 x86/fpu: Default eagerfpu=on on all CPUs
these old FPU designs broke. First, Andy Shevchenko reported a splat:
WARNING: CPU: 0 PID: 823 at arch/x86/include/asm/fpu/internal.h:163 fpu__clear+0x8c/0x160
which was us trying to execute FXRSTOR on those machines even though
they don't support it.
After taking care of that, Bryan O'Donoghue reported that a simple FPU
test still failed because we weren't initializing the FPU state properly
on those machines.
Take care of all that.
Reported-and-tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-cheng <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20160311113206.GD4312@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Sat, 12 Mar 2016 00:34:18 +0000 (16:34 -0800)]
Merge tag 'for-linus-
20160311' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Brian Norris:
"Late MTD fix for v4.5:
- A simple error code handling fix for the NAND ECC test; this was a
regression in v4.5-rc1
- A MAINTAINERS update, which might as well go in ASAP"
* tag 'for-linus-
20160311' of git://git.infradead.org/linux-mtd:
MAINTAINERS: add a maintainer for the NAND subsystem
mtd: nand: tests: fix regression introduced in mtd_nandectest
Linus Torvalds [Sat, 12 Mar 2016 00:19:23 +0000 (16:19 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm/i915 fixes from Dave Airlie:
"Just two i915 regression fixes, that should be it from me"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/i915: Actually retry with bit-banging after GMBUS timeout
drm/i915: Fix bogus dig_port_map[] assignment for pre-HSW
Matthew Dawson [Fri, 11 Mar 2016 21:08:07 +0000 (13:08 -0800)]
mm/mempool: avoid KASAN marking mempool poison checks as use-after-free
When removing an element from the mempool, mark it as unpoisoned in KASAN
before verifying its contents for SLUB/SLAB debugging. Otherwise KASAN
will flag the reads checking the element use-after-free writes as
use-after-free reads.
Signed-off-by: Matthew Dawson <matthew@mjdsystems.ca>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 11 Mar 2016 20:35:54 +0000 (12:35 -0800)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Two more fixes for 4.5:
- One is a fix for OMAP that is urgently needed to avoid DRA7xx chips
from premature aging, by always keeping the Ethernet clock enabled.
- The other solves a I/O memory layout issue on Armada, where SROM
and PCI memory windows were conflicting in some configurations"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: mvebu: fix overlap of Crypto SRAM with PCIe memory window
ARM: dts: dra7: do not gate cpsw clock due to errata i877
ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property
Linus Torvalds [Fri, 11 Mar 2016 20:32:02 +0000 (12:32 -0800)]
Merge tag 'media/v4.5-5' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fix from Mauro Carvalho Chehab:
"One last time fix: It adds a code that prevents some media tools like
media-ctl to hide some entities that have their IDs out of the range
expected by those apps"
* tag 'media/v4.5-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] media-device: map new functions into old types for legacy API
Thomas Petazzoni [Tue, 8 Mar 2016 15:59:57 +0000 (16:59 +0100)]
ARM: mvebu: fix overlap of Crypto SRAM with PCIe memory window
When the Crypto SRAM mappings were added to the Device Tree files
describing the Armada XP boards in commit
c466d997bb16 ("ARM: mvebu:
define crypto SRAM ranges for all armada-xp boards"), the fact that
those mappings were overlaping with the PCIe memory aperture was
overlooked. Due to this, we currently have for all Armada XP platforms
a situation that looks like this:
Memory mapping on Armada XP boards with internal registers at
0xf1000000:
- 0x00000000 -> 0xf0000000 3.75G RAM
- 0xf0000000 -> 0xf1000000 16M NOR flashes (AXP GP / AXP DB)
- 0xf1000000 -> 0xf1100000 1M internal registers
- 0xf8000000 -> 0xffe0000 126M PCIe memory aperture
- 0xf8100000 -> 0xf8110000 64KB Crypto SRAM #0 => OVERLAPS WITH PCIE !
- 0xf8110000 -> 0xf8120000 64KB Crypto SRAM #1 => OVERLAPS WITH PCIE !
- 0xffe00000 -> 0xfff00000 1M PCIe I/O aperture
- 0xfff0000 -> 0xffffffff 1M BootROM
The overlap means that when PCIe devices are added, depending on their
memory window needs, they might or might not be mapped into the
physical address space. Indeed, they will not be mapped if the area
allocated in the PCIe memory aperture by the PCI core overlaps with
one of the Crypto SRAM. Typically, a Intel IGB PCIe NIC that needs 8MB
of PCIe memory will see its PCIe memory window allocated from
0xf80000000 for 8MB, which overlaps with the Crypto SRAM windows. Due
to this, the PCIe window is not created, and any attempt to access the
PCIe window makes the kernel explode:
[ 3.302213] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 3.307841] pci 0000:00:09.0: enabling device (0140 -> 0143)
[ 3.313539] mvebu_mbus: cannot add window '4:f8', conflicts with another window
[ 3.320870] mvebu-pcie soc:pcie-controller: Could not create MBus window at [mem 0xf8000000-0xf87fffff]: -22
[ 3.330811] Unhandled fault: external abort on non-linefetch (0x1008) at 0xf08c0018
This problem does not occur on Armada 370 boards, because we use the
following memory mapping (for boards that have internal registers at
0xf1000000):
- 0x00000000 -> 0xf0000000 3.75G RAM
- 0xf0000000 -> 0xf1000000 16M NOR flashes (AXP GP / AXP DB)
- 0xf1000000 -> 0xf1100000 1M internal registers
- 0xf1100000 -> 0xf1110000 64KB Crypto SRAM #0 => OK !
- 0xf8000000 -> 0xffe0000 126M PCIe memory
- 0xffe00000 -> 0xfff00000 1M PCIe I/O
- 0xfff0000 -> 0xffffffff 1M BootROM
Obviously, the solution is to align the location of the Crypto SRAM
mappings of Armada XP to be similar with the ones on Armada 370, i.e
have them between the "internal registers" area and the beginning of
the PCIe aperture.
However, we have a special case with the OpenBlocks AX3-4 platform,
which has a 128 MB NOR flash. Currently, this NOR flash is mapped from
0xf0000000 to 0xf8000000. This is possible because on OpenBlocks
AX3-4, the internal registers are not at 0xf1000000. And this explains
why the Crypto SRAM mappings were not configured at the same place on
Armada XP.
Hence, the solution is two-fold:
(1) Move the NOR flash mapping on Armada XP OpenBlocks AX3-4 from
0xe8000000 to 0xf0000000. This frees the 0xf0000000 ->
0xf80000000 space.
(2) Move the Crypto SRAM mappings on Armada XP to be similar to
Armada 370 (except of course that Armada XP has two Crypto SRAM
and not one).
After this patch, the memory mapping on Armada XP boards with
registers at 0xf1 is:
- 0x00000000 -> 0xf0000000 3.75G RAM
- 0xf0000000 -> 0xf1000000 16M NOR flashes (AXP GP / AXP DB)
- 0xf1000000 -> 0xf1100000 1M internal registers
- 0xf1100000 -> 0xf1110000 64KB Crypto SRAM #0
- 0xf1110000 -> 0xf1120000 64KB Crypto SRAM #1
- 0xf8000000 -> 0xffe0000 126M PCIe memory
- 0xffe00000 -> 0xfff00000 1M PCIe I/O
- 0xfff0000 -> 0xffffffff 1M BootROM
And the memory mapping for the special case of the OpenBlocks AX3-4
(internal registers at 0xd0000000, NOR of 128 MB):
- 0x00000000 -> 0xc0000000 3G RAM
- 0xd0000000 -> 0xd1000000 1M internal registers
- 0xe800000 -> 0xf0000000 128M NOR flash
- 0xf1100000 -> 0xf1110000 64KB Crypto SRAM #0
- 0xf1110000 -> 0xf1120000 64KB Crypto SRAM #1
- 0xf8000000 -> 0xffe0000 126M PCIe memory
- 0xffe00000 -> 0xfff00000 1M PCIe I/O
- 0xfff0000 -> 0xffffffff 1M BootROM
Fixes:
c466d997bb16 ("ARM: mvebu: define crypto SRAM ranges for all armada-xp boards")
Reported-by: Phil Sutter <phil@nwl.cc>
Cc: Phil Sutter <phil@nwl.cc>
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Torvalds [Fri, 11 Mar 2016 18:57:18 +0000 (10:57 -0800)]
Merge tag 'dmaengine-fix-4.5' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"Two fixes showed up in last few days, and they should be included in
4.5. Summary:
Two more late fixes to drivers, nothing major here:
- A memory leak fix in fsdma unmap the dma descriptors on freeup
- A fix in xdmac driver for residue calculation of dma descriptor"
* tag 'dmaengine-fix-4.5' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: at_xdmac: fix residue computation
dmaengine: fsldma: fix memory leak
Linus Torvalds [Fri, 11 Mar 2016 18:45:03 +0000 (10:45 -0800)]
Merge tag 'pm+acpi-4.5-final' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"Two more fixes for issues introduced recently, one in the generic
device properties framework and one in ACPICA.
Specifics:
- Revert a recent ACPICA commit that has been reverted upstream,
because it caused problems to happen on user systems and the
problem it attempted to address will not be relevant any more after
upcoming ACPI specification changes (Bob Moore).
- Fix crash in the generic device properties framework introduced by
a recent change that forgot to check pointers against error values
in addition to checking them against NULL (Heikki Krogerus)"
* tag 'pm+acpi-4.5-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: fwnode->secondary may contain ERR_PTR(-ENODEV)
ACPICA: Revert "Parser: Fix for SuperName method invocation"
Linus Torvalds [Fri, 11 Mar 2016 18:21:32 +0000 (10:21 -0800)]
Merge tag 'xfs-for-linus-4.5-rc7' of git://git./linux/kernel/git/dgc/linux-xfs
Pull xfs fixes from Dave Chinner:
"This is a fix for a regression introduced in 4.5-rc1 by the new torn
log write detection code. The regression only affects people moving a
clean filesystem between machines/kernels of different architecture
(such as changing between 32 bit and 64 bit kernels), but this is the
recommended (and only!) safe way to migrate a filesystem between
architectures so we really need to ensure it works.
The changes are larger than I'd prefer right at the end of the release
cycle, but the majority of the change is just factoring code to enable
the detection of a clean log at the correct time to avoid this issue.
Changes:
- Only perform torn log write detection on dirty logs. This prevents
failures being detected due to a clean filesystem being moved
between machines or kernels of different architectures (e.g. 32 ->
64 bit, BE -> LE, etc). This fixes a regression introduced by the
torn log write detection in 4.5-rc1"
* tag 'xfs-for-linus-4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: only run torn log write detection on dirty logs
xfs: refactor in-core log state update to helper
xfs: refactor unmount record detection into helper
xfs: separate log head record discovery from verification
Linus Torvalds [Fri, 11 Mar 2016 18:13:49 +0000 (10:13 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"A couple of fixes: Fix for my dumb braino in ncpfs and a long-standing
breakage on recovery from failed rename() in jffs2"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
jffs2: reduce the breakage on recovery from halfway failed rename()
ncpfs: fix a braino in OOM handling in ncp_fill_cache()
Rafael J. Wysocki [Fri, 11 Mar 2016 13:22:54 +0000 (14:22 +0100)]
Merge branches 'device-properties-fixes' and 'acpica-fixes'
* device-properties-fixes:
device property: fwnode->secondary may contain ERR_PTR(-ENODEV)
* acpica-fixes:
ACPICA: Revert "Parser: Fix for SuperName method invocation"
Ingo Molnar [Fri, 11 Mar 2016 08:40:25 +0000 (09:40 +0100)]
Merge tag 'perf-core-for-mingo-
20160310' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Implement 'perf stat --metric-only' (Andi Kleen)
- Fix perf script python database export crash (Chris Phlipot)
Infrastructure changes:
- perf top/report --hierarchy assorted fixes for problems introduced in this
perf/core cycle (Namhyung Kim)
- Support '~' operation in libtraceevent (Steven Rosted)
Build fixes:
- Fix bulding of jitdump on opensuse on ubuntu systems when the DWARF
devel files are not installed (Arnaldo Carvalho de Melo)
- Do not try building jitdump on unsupported arches (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ville SyrjÀlÀ [Mon, 7 Mar 2016 15:56:57 +0000 (17:56 +0200)]
drm/i915: Actually retry with bit-banging after GMBUS timeout
After the GMBUS transfer times out, we set force_bit=1 and
return -EAGAIN expecting the i2c core to call the .master_xfer
hook again so that we will retry the same transfer via bit-banging.
This is in case the gmbus hardware is somehow faulty.
Unfortunately we left adapter->retries to 0, meaning the i2c core
didn't actually do the retry. Let's tell the core we want one retry
when we return -EAGAIN.
Note that i2c-algo-bit also uses this retry count for some internal
retries, so we'll end up increasing those a bit as well.
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Fixes:
bffce907d640 ("drm/i915: abstract i2c bit banging fallback in gmbus xfer")
Signed-off-by: Ville SyrjÀlÀ <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1457366220-29409-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit
8b1f165a4a8f64c28cf42d10e1f4d3b451dedc51)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Andi Kleen [Thu, 3 Mar 2016 23:57:37 +0000 (15:57 -0800)]
perf stat: Add --metric-only support for -A
Add metric only support for -A too. This requires a new print function
that prints the metrics in the right order.
v2: Fix manpage
v3: Simplify nrcpus computation
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-7-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi Kleen [Thu, 3 Mar 2016 23:57:36 +0000 (15:57 -0800)]
perf stat: Implement --metric-only mode
Add a new mode to only print metrics. Sometimes we don't care about the
raw values, just want the computed metrics. This allows more compact
printing, so with -I each sample is only a single line. This also
allows easier plotting and processing with other tools.
The main target is with using --topdown, but it also works with -T and
standard perf stat. A few metrics are not supported.
To avoiding having to hardcode all the metrics in the code it uses a two
pass approach: first compute dummy metrics and only print the headers in
the print_metric callback. Then use the callback to print the actual
values.
There are some additional changes in the stat printout code to handle
all metrics being on a single line.
One issue is that the column code doesn't know in advance what events
are not supported by the CPU, and it would be hard to find out as this
could change based on dynamic conditions. That causes empty columns in
some cases.
The output can be fairly wide, often you may need more than 80 columns.
Example:
% perf stat -a -I 1000 --metric-only
1.
001452803 frontend cycles idle insn per cycle stalled cycles per insn branch-misses of all branches
1.
001452803 158.91% 0.66 2.39 2.92%
2.
002192321 180.63% 0.76 2.08 2.96%
3.
003088282 150.59% 0.62 2.57 2.84%
4.
004369835 196.20% 0.98 1.62 3.79%
5.
005227314 231.98% 0.84 1.90 4.71%
v2: Lots of updates.
v3: Use slightly narrower columns
v4: Add comment
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-6-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi Kleen [Thu, 3 Mar 2016 23:57:35 +0000 (15:57 -0800)]
perf stat: Document CSV format in manpage
With all the recently added fields in the perf stat CSV output we should
finally document them in the man page. Do this here.
v2: Fix fields in documentation (Jiri)
v3: fix order of fields again (Jiri)
v4: Change order again.
v5: Document more fields (Jiri)
v6: Move time stamp first
v7: More fixes (Jiri)
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1457049458-28956-5-git-send-email-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 9 Mar 2016 14:20:53 +0000 (23:20 +0900)]
perf hists browser: Check sort keys before hot key actions
The context menu in TUI hists browser checks corresponding sort keys
when creating the menu item. But hotkey actions lacks these checks so
it can filter using incorrect info.
For example, default sort key of 'perf top' doesn't contain 'comm' or
'pid' sort key so each hist entry's thread info is not reliable. Thus
it should prohibit using thread filter on 't' key.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1457533253-21419-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 9 Mar 2016 15:14:50 +0000 (00:14 +0900)]
perf hists browser: Allow thread filtering for comm sort key
The commit
2eafd410e669 ("perf hists browser: Only 'Zoom into thread'
only when sort order has 'pid'") disabled thread filtering in hist
browser for the default sort key. However the he->thread is still valid
even if 'pid' sort key is not given. Only thing it should not use is
the pid (or tid) of the thread. So allow to filter by thread when
'comm' sort key is given and show pid only if 'pid' sort key is given.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1457536490-24084-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 9 Mar 2016 14:20:51 +0000 (23:20 +0900)]
perf tools: Add sort__has_comm variable
The sort__has_comm variable is to check whether the comm sort key is
given. This is necessary to support thread filtering in the TUI hists
browser later.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1457533253-21419-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 9 Mar 2016 13:47:02 +0000 (22:47 +0900)]
perf tools: Recalc total periods using top-level entries in hierarchy
When hierarchy mode is enabled, each entry in a hierarchy level shares
the period. IOW an upper level entry's period is the sum of lower level
entries. Thus perf uses only one of them to calculate the total period
of hists. It was lowest-level (leaf) entries but it has a problem when
it comes to filters.
If a filter is applied, entries in the same level will be filtered or
not. But upper level entries still have period of their sum including
filtered one. So total sum of upper level entries will not be same as
sum of lower level entries.
This resulted in entries having more than 100% of overhead and it can be
produced using perf top with filter(s).
Reported-and-Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 9 Mar 2016 13:47:01 +0000 (22:47 +0900)]
perf tools: Remove nr_sort_keys field
The nr_sort_keys field is to carry the number of sort entries in a
hpp_list or hists to determine the depth of indentation of a hist entry.
As it's only used in hierarchy mode and now we have used nr_hpp_node for
this reason, there's no need to keep it anymore. Let's get rid of it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 9 Mar 2016 13:47:00 +0000 (22:47 +0900)]
perf hists browser: Cleanup hist_browser__fprintf_hierarchy_entry()
The hist_browser__fprintf_hierarchy_entry() if to dump current output
into a file so it needs to be sync-ed with the corresponding function
hist_browser__show_hierarchy_entry(). So use hists->nr_hpp_node to
indent width and use first fmt_node to print overhead columns instead of
checking whether it's a sort entry (or dynamic entry).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 9 Mar 2016 13:46:59 +0000 (22:46 +0900)]
perf tools: Remove hist_entry->fmt field
It's not used anymore and the output format is accessed by the hpp_list
pointer instead when hierarchy is enabled. Let's get rid of it.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 9 Mar 2016 13:46:58 +0000 (22:46 +0900)]
perf tools: Fix command line filters in hierarchy mode
When a command-line filter is applied in hierarchy mode, output is
broken especially when filtering on lower level. The higher level
entries doesn't show up so it's hard to see the results.
Also it needs to handle multi sort keys in a single hierarchy level.
Before:
$ perf report --hierarchy -s 'cpu,{dso,comm}' --comms swapper --stdio
...
# Overhead CPU / Shared Object+Command
# ........... ...........................
#
13.79% [kernel.vmlinux] swapper
31.71% 000
13.80% [kernel.vmlinux] swapper
0.43% [e1000e] swapper
11.89% [kernel.vmlinux] swapper
9.18% [kernel.vmlinux] swapper
After:
# Overhead CPU / Shared Object+Command
# ........... ...............................
#
33.09% 003
13.79% [kernel.vmlinux] swapper
31.71% 000
13.80% [kernel.vmlinux] swapper
0.43% [e1000e] swapper
21.90% 002
11.89% [kernel.vmlinux] swapper
13.30% 001
9.18% [kernel.vmlinux] swapper
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 9 Mar 2016 13:46:57 +0000 (22:46 +0900)]
perf tools: Add more sort entry check functions
Those functions are for checkinf if a given perf_hpp_fmt is a
filter-related sort entry. With hierarchy mode, it needs to check
filters on the hist entries with its own hpp format list.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 9 Mar 2016 13:46:56 +0000 (22:46 +0900)]
perf tools: Fix hist_entry__filter() for hierarchy
When hierarchy mode is enabled each output format is in a separate hpp
list. So when applying a filter it should check all formats in the
list. Currently it only checks a single ->fmt field which was not set
properly.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1457531222-18130-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 10 Mar 2016 16:41:13 +0000 (17:41 +0100)]
perf jitdump: Build only on supported archs
Build jitdump only on architectures defined in util/genelf.h file, to avoid
breaking the build on such arches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Davidlohr Bueso <dbueso@suse.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Mel Gorman <mgorman@suse.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160310164113.GA11357@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Steven Rostedt [Fri, 26 Feb 2016 23:13:28 +0000 (18:13 -0500)]
tools lib traceevent: Add '~' operation within arg_num_eval()
When evaluating values for print flags, if the value included a '~'
operator, the parsing would fail. This broke kmalloc's parsing of:
__print_flags(REC->gfp_flags, "|", {(unsigned
long)((((((( gfp_t)(0x400000u|0x2000000u)) | (( gfp_t)0x40u) |
(( gfp_t)0x80u) | (( gfp_t)0x20000u)) | (( gfp_t)0x02u)) |
(( gfp_t)0x08u)) | (( gfp_t)0x4000u) | (( gfp_t)0x10000u) |
(( gfp_t)0x1000u) | (( gfp_t)0x200u)) & ~(( gfp_t)0x2000000u))
^
|
here
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160226181328.22f47129@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Boris BREZILLON [Wed, 9 Mar 2016 20:57:24 +0000 (21:57 +0100)]
MAINTAINERS: add a maintainer for the NAND subsystem
Add myself as the maintainer of the NAND subsystem.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Richard Weinberger <richard@nod.at>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Linus Torvalds [Thu, 10 Mar 2016 18:42:15 +0000 (10:42 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"A few simple fixes for ARM, x86, PPC and generic code.
The x86 MMU fix is a bit larger because the surrounding code needed a
cleanup, but nothing worrisome"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: MMU: fix reserved bit check for ept=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0
KVM: MMU: fix ept=0/pte.u=1/pte.w=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0 combo
kvm: cap halt polling at exactly halt_poll_ns
KVM: s390: correct fprs on SIGP (STOP AND) STORE STATUS
KVM: VMX: disable PEBS before a guest entry
KVM: PPC: Book3S HV: Sanitize special-purpose register values on guest exit
Linus Torvalds [Thu, 10 Mar 2016 18:39:04 +0000 (10:39 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"I thought we were done for 4.5, but then the 64k-page chaps came
crawling out of the woodwork. *sigh*
The vmemmap fix I sent for -rc7 caused a regression with 64k pages and
sparsemem and at some point during the release cycle the new hugetlb
code using contiguous ptes started failing the libhugetlbfs tests with
64k pages enabled.
So here are a couple of patches that fix the vmemmap alignment and
disable the new hugetlb page sizes whilst a proper fix is being
developed:
- Temporarily disable huge pages built using contiguous ptes
- Ensure vmemmap region is sufficiently aligned for sparsemem
sections"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hugetlb: partial revert of
66b3923a1a0f
arm64: account for sparsemem section alignment when choosing vmemmap offset
Linus Torvalds [Thu, 10 Mar 2016 18:36:07 +0000 (10:36 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Three bug fixes:
- The fix for the page table corruption (CVE-2016-2143)
- The diagnose statistics introduced a regression for the dasd diag
driver
- Boot crash on systems without the set-program-parameters facility"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: four page table levels vs. fork
s390/cpumf: Fix lpp detection
s390/dasd: fix diag 0x250 inline assembly
Mauro Carvalho Chehab [Sat, 5 Mar 2016 10:13:39 +0000 (07:13 -0300)]
[media] media-device: map new functions into old types for legacy API
The legacy media controller userspace API exposes entity types that
carry both type and function information. The new API replaces the type
with a function. It preserves backward compatibility by defining legacy
functions for the existing types and using them in drivers.
This works fine, as long as newer entity functions won't be added.
Unfortunately, some tools, like media-ctl with --print-dot argument
rely on the now legacy MEDIA_ENT_T_V4L2_SUBDEV and MEDIA_ENT_T_DEVNODE
numeric ranges to identify what entities will be shown.
Also, if the entity doesn't match those ranges, it will ignore the
major/minor information on devnodes, and won't be getting the devnode
name via udev or sysfs.
As we're now adding devices outside the old range, the legacy ioctl
needs to map the new entity functions into a type at the old range,
or otherwise we'll have a regression.
Detected on all released media-ctl versions (e. g. versions <= 1.10).
Fix this by deriving the type from the function to emulate the legacy
API if the function isn't in the legacy functions range.
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Luck, Tony [Thu, 10 Mar 2016 00:40:48 +0000 (16:40 -0800)]
EDAC/sb_edac: Fix computation of channel address
Large memory Haswell-EX systems with multiple DIMMs per channel were
sometimes reporting the wrong DIMM.
Found three problems:
1) Debug printouts for socket and channel interleave were not interpreting
the register fields correctly. The socket interleave field is a 2^X
value (0=1, 1=2, 2=4, 3=8). The channel interleave is X+1 (0=1, 1=2,
2=3. 3=4).
2) Actual use of the socket interleave value didn't interpret as 2^X
3) Conversion of address to channel address was complicated, and wrong.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Aristeu Rozanski <arozansk@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-edac@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ludovic Desroches [Thu, 10 Mar 2016 09:17:55 +0000 (10:17 +0100)]
dmaengine: at_xdmac: fix residue computation
When computing the residue we need two pieces of information: the current
descriptor and the remaining data of the current descriptor. To get
that information, we need to read consecutively two registers but we
can't do it in an atomic way. For that reason, we have to check manually
that current descriptor has not changed.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Suggested-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Reported-by: David Engraf <david.engraf@sysgo.com>
Tested-by: David Engraf <david.engraf@sysgo.com>
Fixes:
e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel
eXtended DMA Controller driver")
Cc: stable@vger.kernel.org #4.1 and later
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Borislav Petkov [Wed, 9 Mar 2016 20:56:22 +0000 (21:56 +0100)]
x86/delay: Avoid preemptible context checks in delay_mwaitx()
We do use this_cpu_ptr(&cpu_tss) as a cacheline-aligned, seldomly
accessed per-cpu var as the MONITORX target in delay_mwaitx(). However,
when called in preemptible context, this_cpu_ptr -> smp_processor_id() ->
debug_smp_processor_id() fires:
BUG: using smp_processor_id() in preemptible [
00000000] code: udevd/312
caller is delay_mwaitx+0x40/0xa0
But we don't care about that check - we only need cpu_tss as a MONITORX
target and it doesn't really matter which CPU's var we're touching as
we're going idle anyway. Fix that.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: spg_linux_kernel@amd.com
Link: http://lkml.kernel.org/r/20160309205622.GG6564@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Paolo Bonzini [Wed, 9 Mar 2016 13:28:02 +0000 (14:28 +0100)]
KVM: MMU: fix reserved bit check for ept=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0
KVM has special logic to handle pages with pte.u=1 and pte.w=0 when
CR0.WP=1. These pages' SPTEs flip continuously between two states:
U=1/W=0 (user and supervisor reads allowed, supervisor writes not allowed)
and U=0/W=1 (supervisor reads and writes allowed, user writes not allowed).
When SMEP is in effect, however, U=0 will enable kernel execution of
this page. To avoid this, KVM also sets NX=1 in the shadow PTE together
with U=0, making the two states U=1/W=0/NX=gpte.NX and U=0/W=1/NX=1.
When guest EFER has the NX bit cleared, the reserved bit check thinks
that the latter state is invalid; teach it that the smep_andnot_wp case
will also use the NX bit of SPTEs.
Cc: stable@vger.kernel.org
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.inel.com>
Fixes:
c258b62b264fdc469b6d3610a907708068145e3b
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 8 Mar 2016 11:13:39 +0000 (12:13 +0100)]
KVM: MMU: fix ept=0/pte.u=1/pte.w=0/CR0.WP=0/CR4.SMEP=1/EFER.NX=0 combo
Yes, all of these are needed. :) This is admittedly a bit odd, but
kvm-unit-tests access.flat tests this if you run it with "-cpu host"
and of course ept=0.
KVM runs the guest with CR0.WP=1, so it must handle supervisor writes
specially when pte.u=1/pte.w=0/CR0.WP=0. Such writes cause a fault
when U=1 and W=0 in the SPTE, but they must succeed because CR0.WP=0.
When KVM gets the fault, it sets U=0 and W=1 in the shadow PTE and
restarts execution. This will still cause a user write to fault, while
supervisor writes will succeed. User reads will fault spuriously now,
and KVM will then flip U and W again in the SPTE (U=1, W=0). User reads
will be enabled and supervisor writes disabled, going back to the
originary situation where supervisor writes fault spuriously.
When SMEP is in effect, however, U=0 will enable kernel execution of
this page. To avoid this, KVM also sets NX=1 in the shadow PTE together
with U=0. If the guest has not enabled NX, the result is a continuous
stream of page faults due to the NX bit being reserved.
The fix is to force EFER.NX=1 even if the CPU is taking care of the EFER
switch. (All machines with SMEP have the CPU_LOAD_IA32_EFER vm-entry
control, so they do not use user-return notifiers for EFER---if they did,
EFER.NX would be forced to the same value as the host).
There is another bug in the reserved bit check, which I've split to a
separate patch for easier application to stable kernels.
Cc: stable@vger.kernel.org
Cc: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Fixes:
f6577a5fa15d82217ca73c74cd2dcbc0f6c781dd
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Davidlohr Bueso [Thu, 10 Mar 2016 01:55:36 +0000 (17:55 -0800)]
locking/csd_lock: Use smp_cond_acquire() in csd_lock_wait()
We can micro-optimize this call and mildly relax the
barrier requirements by relying on ctrl + rmb, keeping
the acquire semantics. In addition, this is pretty much
the now standard for busy-waiting under such restraints.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Link: http://lkml.kernel.org/r/1457574936-19065-3-git-send-email-dbueso@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Davidlohr Bueso [Thu, 10 Mar 2016 01:55:35 +0000 (17:55 -0800)]
locking/csd_lock: Explicitly inline csd_lock*() helpers
While the compiler tends to already to it for us (except for
csd_unlock), make it explicit. These helpers mainly deal with
the ->flags, are short-lived and can be called, for example,
from smp_call_function_many().
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Link: http://lkml.kernel.org/r/1457574936-19065-2-git-send-email-dbueso@suse.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Thu, 10 Mar 2016 09:28:27 +0000 (10:28 +0100)]
Merge branch 'linus' into locking/core, to pick up fixes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Yu-cheng Yu [Thu, 10 Mar 2016 00:28:54 +0000 (16:28 -0800)]
x86/fpu: Revert ("x86/fpu: Disable AVX when eagerfpu is off")
Leonid Shatz noticed that the SDM interpretation of the following
recent commit:
394db20ca240741 ("x86/fpu: Disable AVX when eagerfpu is off")
... is incorrect and that the original behavior of the FPU code was correct.
Because AVX is not stated in CR0 TS bit description, it was mistakenly
believed to be not supported for lazy context switch. This turns out
to be false:
Intel Software Developer's Manual Vol. 3A, Sec. 2.5 Control Registers:
'TS Task Switched bit (bit 3 of CR0) -- Allows the saving of the x87 FPU/
MMX/SSE/SSE2/SSE3/SSSE3/SSE4 context on a task switch to be delayed until
an x87 FPU/MMX/SSE/SSE2/SSE3/SSSE3/SSE4 instruction is actually executed
by the new task.'
Intel Software Developer's Manual Vol. 2A, Sec. 2.4 Instruction Exception
Specification:
'AVX instructions refer to exceptions by classes that include #NM
"Device Not Available" exception for lazy context switch.'
So revert the commit.
Reported-by: Leonid Shatz <leonid.shatz@ravellosystems.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1457569734-3785-1-git-send-email-yu-cheng.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Martin Schwidefsky [Mon, 15 Feb 2016 13:46:49 +0000 (14:46 +0100)]
s390/mm: four page table levels vs. fork
The fork of a process with four page table levels is broken since
git commit
6252d702c5311ce9 "[S390] dynamic page tables."
All new mm contexts are created with three page table levels and
an asce limit of 4TB. If the parent has four levels dup_mmap will
add vmas to the new context which are outside of the asce limit.
The subsequent call to copy_page_range will walk the three level
page table structure of the new process with non-zero pgd and pud
indexes. This leads to memory clobbers as the pgd_index *and* the
pud_index is added to the mm->pgd pointer without a pgd_deref
in between.
The init_new_context() function is selecting the number of page
table levels for a new context. The function is used by mm_init()
which in turn is called by dup_mm() and mm_alloc(). These two are
used by fork() and exec(). The init_new_context() function can
distinguish the two cases by looking at mm->context.asce_limit,
for fork() the mm struct has been copied and the number of page
table levels may not change. For exec() the mm_alloc() function
set the new mm structure to zero, in this case a three-level page
table is created as the temporary stack space is located at
STACK_TOP_MAX = 4TB.
This fixes CVE-2016-2143.
Reported-by: Marcin KoĆcielnicki <koriakin@0x04.net>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Linus Torvalds [Thu, 10 Mar 2016 04:24:23 +0000 (20:24 -0800)]
Merge tag 'spi-fix-v4.5-rc7' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few driver specific fixes for the Rockchip and i.MX SPI controllers,
especially for the i.MX they're annoying bugs if you run into them"
* tag 'spi-fix-v4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: imx: fix spi resource leak with dma transfer
spi: imx: allow only WML aligned transfers to use DMA
spi: rockchip: add missing spi_master_put
spi: rockchip: disable runtime pm when in err case
Mark Brown [Thu, 10 Mar 2016 03:42:24 +0000 (10:42 +0700)]
Merge remote-tracking branch 'spi/fix/rockchip' into spi-linus
Mark Brown [Thu, 10 Mar 2016 03:42:22 +0000 (10:42 +0700)]
Merge remote-tracking branch 'spi/fix/imx' into spi-linus
Linus Torvalds [Thu, 10 Mar 2016 03:33:05 +0000 (19:33 -0800)]
Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 fix from Ted Ts'o:
"This fixes a regression which crept in v4.5-rc5"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: iterate over buffer heads correctly in move_extent_per_page()
Linus Torvalds [Thu, 10 Mar 2016 03:12:37 +0000 (19:12 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A few imx fixes I missed from a couple of weeks ago, they still aren't
that big and fix some regression and a fail to boot problem.
Other than that, a couple of regression fixes for radeon/amdgpu, one
regression fix for vmwgfx and one regression fix for tda998x"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
Revert "drm/radeon/pm: adjust display configuration after powerstate"
drm/amdgpu/dp: add back special handling for NUTMEG
drm/radeon/dp: add back special handling for NUTMEG
drm/i2c: tda998x: Choose between atomic or non atomic dpms helper
drm/vmwgfx: Add back ->detect() and ->fill_modes()
drm/radeon: Fix error handling in radeon_flip_work_func.
drm/amdgpu: Fix error handling in amdgpu_flip_work_func.
drm/imx: Add missing DRM_FORMAT_RGB565 to ipu_plane_formats
drm/imx: notify DRM core about CRTC vblank state
gpu: ipu-v3: Reset IPU before activating IRQ
gpu: ipu-v3: Do not bail out on missing optional port nodes
Linus Torvalds [Thu, 10 Mar 2016 03:01:58 +0000 (19:01 -0800)]
Merge tag 'trace-fixes-v4.5-rc7' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"I previously sent a fix that prevents all trace events from being
called if the current cpu is offline.
But I forgot that in 3.18, we added lockdep checks to test RCU usage
even when the event is disabled. Although there cannot be any bug
when a cpu is going offline, we now get false warnings triggered by
the added checks of the event being disabled.
I removed the check from the tracepoint code itself, and added it to
the condition section (which is "1" for 'no condition'). This way the
online cpu check will get checked in all the right locations"
* tag 'trace-fixes-v4.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix check for cpu online when event is disabled
Eryu Guan [Sun, 21 Feb 2016 23:38:44 +0000 (18:38 -0500)]
ext4: iterate over buffer heads correctly in move_extent_per_page()
In commit
bcff24887d00 ("ext4: don't read blocks from disk after extents
being swapped") bh is not updated correctly in the for loop and wrong
data has been written to disk. generic/324 catches this on sub-page
block size ext4.
Fixes:
bcff24887d00 ("ext4: don't read blocks from disk after extentsbeing swapped")
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Linus Torvalds [Thu, 10 Mar 2016 02:27:52 +0000 (18:27 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge fixes from Andrew Morton:
"13 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
dma-mapping: avoid oops when parameter cpu_addr is null
mm/hugetlb: use EOPNOTSUPP in hugetlb sysctl handlers
memremap: check pfn validity before passing to pfn_to_page()
mm, thp: fix migration of PTE-mapped transparent huge pages
dax: check return value of dax_radix_entry()
ocfs2: fix return value from ocfs2_page_mkwrite()
arm64: kasan: clear stale stack poison
sched/kasan: remove stale KASAN poison after hotplug
kasan: add functions to clear stack poison
mm: fix mixed zone detection in devm_memremap_pages
list: kill list_force_poison()
mm: __delete_from_page_cache show Bad page if mapped
mm/hugetlb: hugetlb_no_page: rate-limit warning message
Zhen Lei [Wed, 9 Mar 2016 22:08:38 +0000 (14:08 -0800)]
dma-mapping: avoid oops when parameter cpu_addr is null
To keep consistent with kfree, which tolerate ptr is NULL. We do this
because sometimes we may use goto statement, so that success and failure
case can share parts of the code. But unfortunately, dma_free_coherent
called with parameter cpu_addr is null will cause oops, such as showed
below:
Unable to handle kernel paging request at virtual address
ffffffc020d3b2b8
pgd =
ffffffc083a61000
[
ffffffc020d3b2b8] *pgd=
0000000000000000, *pud=
0000000000000000
CPU: 4 PID: 1489 Comm: malloc_dma_1 Tainted: G O 4.1.12 #1
Hardware name: ARM64 (DT)
PC is at __dma_free_coherent.isra.10+0x74/0xc8
LR is at __dma_free+0x9c/0xb0
Process malloc_dma_1 (pid: 1489, stack limit = 0xffffffc0837fc020)
[...]
Call trace:
__dma_free_coherent.isra.10+0x74/0xc8
__dma_free+0x9c/0xb0
malloc_dma+0x104/0x158 [dma_alloc_coherent_mtmalloc]
kthread+0xec/0xfc
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Stancek [Wed, 9 Mar 2016 22:08:35 +0000 (14:08 -0800)]
mm/hugetlb: use EOPNOTSUPP in hugetlb sysctl handlers
Replace ENOTSUPP with EOPNOTSUPP. If hugepages are not supported, this
value is propagated to userspace. EOPNOTSUPP is part of uapi and is
widely supported by libc libraries.
It gives nicer message to user, rather than:
# cat /proc/sys/vm/nr_hugepages
cat: /proc/sys/vm/nr_hugepages: Unknown error 524
And also LTP's proc01 test was failing because this ret code (524)
was unexpected:
proc01 1 TFAIL : proc01.c:396: read failed: /proc/sys/vm/nr_hugepages: errno=???(524): Unknown error 524
proc01 2 TFAIL : proc01.c:396: read failed: /proc/sys/vm/nr_hugepages_mempolicy: errno=???(524): Unknown error 524
proc01 3 TFAIL : proc01.c:396: read failed: /proc/sys/vm/nr_overcommit_hugepages: errno=???(524): Unknown error 524
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ard Biesheuvel [Wed, 9 Mar 2016 22:08:32 +0000 (14:08 -0800)]
memremap: check pfn validity before passing to pfn_to_page()
In memremap's helper function try_ram_remap(), we dereference a struct
page pointer that was derived from a PFN that is known to be covered by
a 'System RAM' iomem region, and is thus assumed to be a 'valid' PFN,
i.e., a PFN that has a struct page associated with it and is covered by
the kernel direct mapping.
However, the assumption that there is a 1:1 relation between the System
RAM iomem region and the kernel direct mapping is not universally valid
on all architectures, and on ARM and arm64, 'System RAM' may include
regions for which pfn_valid() returns false.
Generally speaking, both __va() and pfn_to_page() should only ever be
called on PFNs/physical addresses for which pfn_valid() returns true, so
add that check to try_ram_remap().
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kirill A. Shutemov [Wed, 9 Mar 2016 22:08:30 +0000 (14:08 -0800)]
mm, thp: fix migration of PTE-mapped transparent huge pages
We don't have native support of THP migration, so we have to split huge
page into small pages in order to migrate it to different node. This
includes PTE-mapped huge pages.
I made mistake in refcounting patchset: we don't actually split
PTE-mapped huge page in queue_pages_pte_range(), if we step on head
page.
The result is that the head page is queued for migration, but none of
tail pages: putting head page on queue takes pin on the page and any
subsequent attempts of split_huge_pages() would fail and we skip queuing
tail pages.
unmap_and_move_huge_page() will eventually split the huge pages, but
only one of 512 pages would get migrated.
Let's fix the situation.
Fixes:
248db92da13f2507 ("migrate_pages: try to split pages on queuing")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ross Zwisler [Wed, 9 Mar 2016 22:08:27 +0000 (14:08 -0800)]
dax: check return value of dax_radix_entry()
dax_pfn_mkwrite() previously wasn't checking the return value of the
call to dax_radix_entry(), which was a mistake.
Instead, capture this return value and return the appropriate VM_FAULT_
value.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 9 Mar 2016 22:08:24 +0000 (14:08 -0800)]
ocfs2: fix return value from ocfs2_page_mkwrite()
ocfs2_page_mkwrite() could mistakenly return error code instead of
mkwrite status value. Fix it.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark Rutland [Wed, 9 Mar 2016 22:08:21 +0000 (14:08 -0800)]
arm64: kasan: clear stale stack poison
Functions which the compiler has instrumented for KASAN place poison on
the stack shadow upon entry and remove this poison prior to returning.
In the case of cpuidle, CPUs exit the kernel a number of levels deep in
C code. Any instrumented functions on this critical path will leave
portions of the stack shadow poisoned.
If CPUs lose context and return to the kernel via a cold path, we
restore a prior context saved in __cpu_suspend_enter are forgotten, and
we never remove the poison they placed in the stack shadow area by
functions calls between this and the actual exit of the kernel.
Thus, (depending on stackframe layout) subsequent calls to instrumented
functions may hit this stale poison, resulting in (spurious) KASAN
splats to the console.
To avoid this, clear any stale poison from the idle thread for a CPU
prior to bringing a CPU online.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark Rutland [Wed, 9 Mar 2016 22:08:18 +0000 (14:08 -0800)]
sched/kasan: remove stale KASAN poison after hotplug
Functions which the compiler has instrumented for KASAN place poison on
the stack shadow upon entry and remove this poision prior to returning.
In the case of CPU hotplug, CPUs exit the kernel a number of levels deep
in C code. Any instrumented functions on this critical path will leave
portions of the stack shadow poisoned.
When a CPU is subsequently brought back into the kernel via a different
path, depending on stackframe, layout calls to instrumented functions
may hit this stale poison, resulting in (spurious) KASAN splats to the
console.
To avoid this, clear any stale poison from the idle thread for a CPU
prior to bringing a CPU online.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark Rutland [Wed, 9 Mar 2016 22:08:15 +0000 (14:08 -0800)]
kasan: add functions to clear stack poison
Functions which the compiler has instrumented for ASAN place poison on
the stack shadow upon entry and remove this poison prior to returning.
In some cases (e.g. hotplug and idle), CPUs may exit the kernel a
number of levels deep in C code. If there are any instrumented
functions on this critical path, these will leave portions of the idle
thread stack shadow poisoned.
If a CPU returns to the kernel via a different path (e.g. a cold
entry), then depending on stack frame layout subsequent calls to
instrumented functions may use regions of the stack with stale poison,
resulting in (spurious) KASAN splats to the console.
Contemporary GCCs always add stack shadow poisoning when ASAN is
enabled, even when asked to not instrument a function [1], so we can't
simply annotate functions on the critical path to avoid poisoning.
Instead, this series explicitly removes any stale poison before it can
be hit. In the common hotplug case we clear the entire stack shadow in
common code, before a CPU is brought online.
On architectures which perform a cold return as part of cpu idle may
retain an architecture-specific amount of stack contents. To retain the
poison for this retained context, the arch code must call the core KASAN
code, passing a "watermark" stack pointer value beyond which shadow will
be cleared. Architectures which don't perform a cold return as part of
idle do not need any additional code.
This patch (of 3):
Functions which the compiler has instrumented for KASAN place poison on
the stack shadow upon entry and remove this poision prior to returning.
In some cases (e.g. hotplug and idle), CPUs may exit the kernel a number
of levels deep in C code. If there are any instrumented functions on this
critical path, these will leave portions of the stack shadow poisoned.
If a CPU returns to the kernel via a different path (e.g. a cold entry),
then depending on stack frame layout subsequent calls to instrumented
functions may use regions of the stack with stale poison, resulting in
(spurious) KASAN splats to the console.
To avoid this, we must clear stale poison from the stack prior to
instrumented functions being called. This patch adds functions to the
KASAN core for removing poison from (portions of) a task's stack. These
will be used by subsequent patches to avoid problems with hotplug and
idle.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Williams [Wed, 9 Mar 2016 22:08:13 +0000 (14:08 -0800)]
mm: fix mixed zone detection in devm_memremap_pages
The check for whether we overlap "System RAM" needs to be done at
section granularity. For example a system with the following mapping:
100000000-
37bffffff : System RAM
37c000000-
837ffffff : Persistent Memory
...is unable to use devm_memremap_pages() as it would result in two
zones colliding within a given section.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dan Williams [Wed, 9 Mar 2016 22:08:10 +0000 (14:08 -0800)]
list: kill list_force_poison()
Given we have uninitialized list_heads being passed to list_add() it
will always be the case that those uninitialized values randomly trigger
the poison value. Especially since a list_add() operation will seed the
stack with the poison value for later stack allocations to trip over.
For example, see these two false positive reports:
list_add attempted on force-poisoned entry
WARNING: at lib/list_debug.c:34
[..]
NIP [
c00000000043c390] __list_add+0xb0/0x150
LR [
c00000000043c38c] __list_add+0xac/0x150
Call Trace:
__list_add+0xac/0x150 (unreliable)
__down+0x4c/0xf8
down+0x68/0x70
xfs_buf_lock+0x4c/0x150 [xfs]
list_add attempted on force-poisoned entry(
0000000000000500),
new->next ==
d0000000059ecdb0, new->prev ==
0000000000000500
WARNING: at lib/list_debug.c:33
[..]
NIP [
c00000000042db78] __list_add+0xa8/0x140
LR [
c00000000042db74] __list_add+0xa4/0x140
Call Trace:
__list_add+0xa4/0x140 (unreliable)
rwsem_down_read_failed+0x6c/0x1a0
down_read+0x58/0x60
xfs_log_commit_cil+0x7c/0x600 [xfs]
Fixes: commit
5c2c2587b132 ("mm, dax, pmem: introduce {get|put}_dev_pagemap() for dax-gup")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Eryu Guan <eguan@redhat.com>
Tested-by: Eryu Guan <eguan@redhat.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 9 Mar 2016 22:08:07 +0000 (14:08 -0800)]
mm: __delete_from_page_cache show Bad page if mapped
Commit
e1534ae95004 ("mm: differentiate page_mapped() from
page_mapcount() for compound pages") changed the famous
BUG_ON(page_mapped(page)) in __delete_from_page_cache() to
VM_BUG_ON_PAGE(page_mapped(page)): which gives us more info when
CONFIG_DEBUG_VM=y, but nothing at all when not.
Although it has not usually been very helpul, being hit long after the
error in question, we do need to know if it actually happens on users'
systems; but reinstating a crash there is likely to be opposed :)
In the non-debug case, pr_alert("BUG: Bad page cache") plus dump_page(),
dump_stack(), add_taint() - I don't really believe LOCKDEP_NOW_UNRELIABLE,
but that seems to be the standard procedure now. Move that, or the
VM_BUG_ON_PAGE(), up before the deletion from tree: so that the
unNULLified page->mapping gives a little more information.
If the inode is being evicted (rather than truncated), it won't have any
vmas left, so it's safe(ish) to assume that the raised mapcount is
erroneous, and we can discount it from page_count to avoid leaking the
page (I'm less worried by leaking the occasional 4kB, than losing a
potential 2MB page with each 4kB page leaked).
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Geoffrey Thomas [Wed, 9 Mar 2016 22:08:04 +0000 (14:08 -0800)]
mm/hugetlb: hugetlb_no_page: rate-limit warning message
The warning message "killed due to inadequate hugepage pool" simply
indicates that SIGBUS was sent, not that the process was forcibly killed.
If the process has a signal handler installed does not fix the problem,
this message can rapidly spam the kernel log.
On my amd64 dev machine that does not have hugepages configured, I can
reproduce the repeated warnings easily by setting vm.nr_hugepages=2 (i.e.,
4 megabytes of huge pages) and running something that sets a signal
handler and forks, like
#include <sys/mman.h>
#include <signal.h>
#include <stdlib.h>
#include <unistd.h>
sig_atomic_t counter = 10;
void handler(int signal)
{
if (counter-- == 0)
exit(0);
}
int main(void)
{
int status;
char *addr = mmap(NULL, 4 *
1048576, PROT_READ | PROT_WRITE,
MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB, -1, 0);
if (addr == MAP_FAILED) {perror("mmap"); return 1;}
*addr = 'x';
switch (fork()) {
case -1:
perror("fork"); return 1;
case 0:
signal(SIGBUS, handler);
*addr = 'x';
break;
default:
*addr = 'x';
wait(&status);
if (WIFSIGNALED(status)) {
psignal(WTERMSIG(status), "child");
}
break;
}
}
Signed-off-by: Geoffrey Thomas <geofft@ldpreload.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Olof Johansson [Wed, 9 Mar 2016 22:15:31 +0000 (14:15 -0800)]
Merge tag 'for-v4.5-rc/omap-critical-fixes-a' of git://git./linux/kernel/git/pjw/omap-pending into fixes
ARM: OMAP2+: critical DRA7xx fix for v4.5-rc
Force the DRA7xx Ethernet internal clock source to stay enabled
per TI erratum i877:
http://www.ti.com/lit/er/sprz429h/sprz429h.pdf
Otherwise, if the Ethernet internal clock source is disabled, the
chip will age prematurely, and the RGMII I/O timing will soon
fail to meet the delay time and skew specifications for 1000Mbps
Ethernet.
This fix should go in as soon as possible.
Basic build, boot, and PM test results are available here:
http://www.pwsan.com/omap/testlogs/omap-critical-fixes-for-v4.5-rc/
20160307014209/
* tag 'for-v4.5-rc/omap-critical-fixes-a' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending:
ARM: dts: dra7: do not gate cpsw clock due to errata i877
ARM: OMAP2+: hwmod: Introduce ti,no-idle dt property
Signed-off-by: Olof Johansson <olof@lixom.net>
Linus Torvalds [Wed, 9 Mar 2016 21:28:27 +0000 (13:28 -0800)]
Merge tag 'pci-v4.5-fixes-5' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"Here's another fix for v4.5. It fixes an ARM regression in v4.0 that
causes many boxes to crash on boot, including cns3xxx, dove,
footbridge, iopl13xx, ip32x, iop33x, ixp4xx, ks8695, mv78xx0, orion5x,
pxa, sa1100, etc.
The change is in code that's only built for ARM and ARM64.
Summary:
Enumeration:
Allow generic PCI domains without bridge "parent" pointer (Krzysztof HaĆasa)"
* tag 'pci-v4.5-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Allow a NULL "parent" pointer in pci_bus_assign_domain_nr()
Steven Rostedt (Red Hat) [Wed, 9 Mar 2016 16:58:41 +0000 (11:58 -0500)]
tracing: Fix check for cpu online when event is disabled
Commit
f37755490fe9b ("tracepoints: Do not trace when cpu is offline") added
a check to make sure that tracepoints only get called when the cpu is
online, as it uses rcu_read_lock_sched() for protection.
Commit
3a630178fd5f3 ("tracing: generate RCU warnings even when tracepoints
are disabled") added lockdep checks (including rcu checks) for events that
are not enabled to catch possible RCU issues that would only be triggered if
a trace event was enabled. Commit
f37755490fe9b only stopped the warnings
when the trace event was enabled but did not prevent warnings if the trace
event was called when disabled.
To fix this, the cpu online check is moved to where the condition is added
to the trace event. This will place the cpu online check in all places that
it may be used now and in the future.
Cc: stable@vger.kernel.org # v3.18+
Fixes:
f37755490fe9b ("tracepoints: Do not trace when cpu is offline")
Fixes:
3a630178fd5f3 ("tracing: generate RCU warnings even when tracepoints are disabled")
Reported-by: Sudeep Holla <sudeep.holla@arm.com>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Will Deacon [Wed, 9 Mar 2016 15:22:55 +0000 (15:22 +0000)]
arm64: hugetlb: partial revert of
66b3923a1a0f
Commit
66b3923a1a0f ("arm64: hugetlb: add support for PTE contiguous bit")
introduced support for huge pages using the contiguous bit in the PTE
as opposed to block mappings, which may be slightly unwieldy (512M) in
64k page configurations.
Unfortunately, this support has resulted in some late regressions when
running the libhugetlbfs test suite with 64k pages and CONFIG_DEBUG_VM
as a result of a BUG:
| readback (2M: 64): ------------[ cut here ]------------
| kernel BUG at fs/hugetlbfs/inode.c:446!
| Internal error: Oops - BUG: 0 [#1] SMP
| Modules linked in:
| CPU: 7 PID: 1448 Comm: readback Not tainted 4.5.0-rc7 #148
| Hardware name: linux,dummy-virt (DT)
| task:
fffffe0040964b00 ti:
fffffe00c2668000 task.ti:
fffffe00c2668000
| PC is at remove_inode_hugepages+0x44c/0x480
| LR is at remove_inode_hugepages+0x264/0x480
Rather than revert the entire patch, simply avoid advertising the
contiguous huge page sizes for now while people are actively working on
a fix. This patch can then be reverted once things have been sorted out.
Cc: David Woods <dwoods@ezchip.com>
Reported-by: Steve Capper <steve.capper@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Ard Biesheuvel [Tue, 8 Mar 2016 14:09:29 +0000 (21:09 +0700)]
arm64: account for sparsemem section alignment when choosing vmemmap offset
Commit
dfd55ad85e4a ("arm64: vmemmap: use virtual projection of linear
region") fixed an issue where the struct page array would overflow into the
adjacent virtual memory region if system RAM was placed so high up in
physical memory that its addresses were not representable in the build time
configured virtual address size.
However, the fix failed to take into account that the vmemmap region needs
to be relatively aligned with respect to the sparsemem section size, so that
a sequence of page structs corresponding with a sparsemem section in the
linear region appears naturally aligned in the vmemmap region.
So round up vmemmap to sparsemem section size. Since this essentially moves
the projection of the linear region up in memory, also revert the reduction
of the size of the vmemmap region.
Cc: <stable@vger.kernel.org>
Fixes:
dfd55ad85e4a ("arm64: vmemmap: use virtual projection of linear region")
Tested-by: Mark Langsdorf <mlangsdo@redhat.com>
Tested-by: David Daney <david.daney@cavium.com>
Tested-by: Robert Richter <rrichter@cavium.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Luis R. Rodriguez [Sat, 23 Jan 2016 02:34:22 +0000 (18:34 -0800)]
dma, mm/pat: Rename dma_*_writecombine() to dma_*_wc()
Rename dma_*_writecombine() to dma_*_wc(), so that the naming
is coherent across the various write-combining APIs. Keep the
old names for compatibility for a while, these can be removed
at a later time. A guard is left to enable backporting of the
rename, and later remove of the old mapping defines seemlessly.
Build tested successfully with allmodconfig.
The following Coccinelle SmPL patch was used for this simple
transformation:
@ rename_dma_alloc_writecombine @
expression dev, size, dma_addr, gfp;
@@
-dma_alloc_writecombine(dev, size, dma_addr, gfp)
+dma_alloc_wc(dev, size, dma_addr, gfp)
@ rename_dma_free_writecombine @
expression dev, size, cpu_addr, dma_addr;
@@
-dma_free_writecombine(dev, size, cpu_addr, dma_addr)
+dma_free_wc(dev, size, cpu_addr, dma_addr)
@ rename_dma_mmap_writecombine @
expression dev, vma, cpu_addr, dma_addr, size;
@@
-dma_mmap_writecombine(dev, vma, cpu_addr, dma_addr, size)
+dma_mmap_wc(dev, vma, cpu_addr, dma_addr, size)
We also keep the old names as compatibility helpers, and
guard against their definition to make backporting easier.
Generated-by: Coccinelle SmPL
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: airlied@linux.ie
Cc: akpm@linux-foundation.org
Cc: benh@kernel.crashing.org
Cc: bhelgaas@google.com
Cc: bp@suse.de
Cc: dan.j.williams@intel.com
Cc: daniel.vetter@ffwll.ch
Cc: dhowells@redhat.com
Cc: julia.lawall@lip6.fr
Cc: konrad.wilk@oracle.com
Cc: linux-fbdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Cc: luto@amacapital.net
Cc: mst@redhat.com
Cc: tomi.valkeinen@ti.com
Cc: toshi.kani@hp.com
Cc: vinod.koul@intel.com
Cc: xen-devel@lists.xensource.com
Link: http://lkml.kernel.org/r/1453516462-4844-1-git-send-email-mcgrof@do-not-panic.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri Olsa [Tue, 8 Mar 2016 18:42:30 +0000 (19:42 +0100)]
perf tools: Omit unnecessary cast in perf_pmu__parse_scale
There's no need to use a const char pointer, we can used char pointer
from the beginning and omit the unnecessary cast.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160308184230.GB7897@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 9 Mar 2016 10:04:17 +0000 (11:04 +0100)]
perf tools: Pass perf_hpp_list all the way through setup_sort_list
Pass perf_hpp_list all the way through setup_sort_list so that the sort
entry can be added on the arbitrary list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20160309100417.GA30910@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Chris Phlipot [Wed, 9 Mar 2016 05:11:54 +0000 (21:11 -0800)]
perf tools: Fix perf script python database export crash
Remove the union in evsel so that the database id and priv pointer can
be used simultainously without conflicting and crashing.
Detailed Description for the fixed bug follows:
perf script crashes with a segmentation fault on user space tool version
4.5.rc7.ge2857b when using the python database export API. It works
properly in 4.4 and prior versions.
the crash fist appeared in:
cfc8874a4859 ("perf script: Process cpu/threads maps")
How to reproduce the bug:
Remove any temporary files left over from a previous crash (if you have
already attemped to reproduce the bug):
$ rm -r test_db-perf-data
$ dropdb test_db
$ perf record timeout 1 yes >/dev/null
$ perf script -s scripts/python/export-to-postgresql.py test_db
Stack Trace:
Program received signal SIGSEGV, Segmentation fault.
__GI___libc_free (mem=0x1) at malloc.c:2929
2929 malloc.c: No such file or directory.
(gdb) bt
at util/stat.c:122
argv=<optimized out>, prefix=<optimized out>) at builtin-script.c:2231
argc=argc@entry=4, argv=argv@entry=0x7fffffffdf70) at perf.c:390
at perf.c:451
Signed-off-by: Chris Phlipot <cphlipot0@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes:
cfc8874a4859 ("perf script: Process cpu/threads maps")
Link: http://lkml.kernel.org/r/1457500314-8912-1-git-send-email-cphlipot0@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Mon, 7 Mar 2016 21:48:45 +0000 (18:48 -0300)]
perf jitdump: DWARF is also needed
While building on a Docker container for ubuntu and installing package
by package one ends up with:
MKDIR /tmp/build/util/
CC /tmp/build/util/genelf.o
util/genelf.c:22:19: fatal error: dwarf.h: No such file or directory
#include <dwarf.h>
^
compilation terminated.
mv: cannot stat '/tmp/build/util/.genelf.o.tmp': No such file or directory
Because the jitdump code needs the DWARF related development packages to
be installed. So make it dependent on that so that the build can succeed
without jitdump support.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-le498robnmxd40237wej3w62@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andy Lutomirski [Thu, 21 Jan 2016 23:24:31 +0000 (15:24 -0800)]
x86/fpu: Fix 'no387' regression
After fixing FPU option parsing, we now parse the 'no387' boot option
too early: no387 clears X86_FEATURE_FPU before it's even probed, so
the boot CPU promptly re-enables it.
I suspect it gets even more confused on SMP.
Fix the probing code to leave X86_FEATURE_FPU off if it's been
disabled by setup_clear_cpu_cap().
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Fixes:
4f81cbafcce2 ("x86/fpu: Fix early FPU command-line parsing")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
David Matlack [Wed, 9 Mar 2016 00:19:44 +0000 (16:19 -0800)]
kvm: cap halt polling at exactly halt_poll_ns
When growing halt-polling, there is no check that the poll time exceeds
the limit. It's possible for vcpu->halt_poll_ns grow once past
halt_poll_ns, and stay there until a halt which takes longer than
vcpu->halt_poll_ns. For example, booting a Linux guest with
halt_poll_ns=11000:
... kvm:kvm_halt_poll_ns: vcpu 0: halt_poll_ns 0 (shrink 10000)
... kvm:kvm_halt_poll_ns: vcpu 0: halt_poll_ns 10000 (grow 0)
... kvm:kvm_halt_poll_ns: vcpu 0: halt_poll_ns 20000 (grow 10000)
Signed-off-by: David Matlack <dmatlack@google.com>
Fixes:
aca6ff29c4063a8d467cdee241e6b3bf7dc4a171
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ingo Molnar [Wed, 9 Mar 2016 09:40:01 +0000 (10:40 +0100)]
perf bench mem: Prepare the x86-64 build for upstream memcpy_mcsafe() changes
The following upcoming upstream commit:
92b0729c34ca ("x86/mm, x86/mce: Add memcpy_mcsafe()")
Adds _ASM_EXTABLE_FAULT(), which is not available in user-space
and breaks the build.
We don't really need _ASM_EXTABLE_FAULT() in user-space, so simply
wrap it to nothing.
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Xuelin Shi [Tue, 8 Mar 2016 06:02:01 +0000 (14:02 +0800)]
dmaengine: fsldma: fix memory leak
adding unmap of sources and destinations while doing dequeue.
Signed-off-by: Xuelin Shi <xuelin.shi@nxp.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Dave Airlie [Wed, 9 Mar 2016 04:21:12 +0000 (14:21 +1000)]
Merge tag 'imx-drm-fixes-2016-02-19' of git://git.pengutronix.de/git/pza/linux into drm-fixes
ipu-v3 probe and imx-drm crtc and plane fixes
- Fix ipu probe if optional port nodes are not present in the device tree
- Reset the ipu before initializing interrupts, not thereafter
- Notify DRM core about the state of vblank interrupts
- Add missing RGB565 format to the list of plate formats
* tag 'imx-drm-fixes-2016-02-19' of git://git.pengutronix.de/git/pza/linux:
drm/imx: Add missing DRM_FORMAT_RGB565 to ipu_plane_formats
drm/imx: notify DRM core about CRTC vblank state
gpu: ipu-v3: Reset IPU before activating IRQ
gpu: ipu-v3: Do not bail out on missing optional port nodes
Dave Airlie [Wed, 9 Mar 2016 04:19:14 +0000 (14:19 +1000)]
Merge branch 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
radeon and amdgpu fixes for 4.5. Three regression fixes and
some fixups for the error handling in the vblank regression fixes
from earlier.
* 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux:
Revert "drm/radeon/pm: adjust display configuration after powerstate"
drm/amdgpu/dp: add back special handling for NUTMEG
drm/radeon/dp: add back special handling for NUTMEG
drm/radeon: Fix error handling in radeon_flip_work_func.
drm/amdgpu: Fix error handling in amdgpu_flip_work_func.
Heikki Krogerus [Tue, 8 Mar 2016 13:44:36 +0000 (15:44 +0200)]
device property: fwnode->secondary may contain ERR_PTR(-ENODEV)
This fixes BUG triggered when fwnode->secondary is not NULL,
but has ERR_PTR(-ENODEV) instead.
BUG: unable to handle kernel paging request at
ffffffffffffffed
IP: [<
ffffffff81677b86>] __fwnode_property_read_string+0x26/0x160
PGD
200e067 PUD
2010067 PMD 0
Oops: 0000 [#1] SMP KASAN
Modules linked in: dwc3_pci(+) dwc3
CPU: 0 PID: 1138 Comm: modprobe Not tainted 4.5.0-rc5+ #61
task:
ffff88015aaf5b00 ti:
ffff88007b958000 task.ti:
ffff88007b958000
RIP: 0010:[<
ffffffff81677b86>] [<
ffffffff81677b86>] __fwnode_property_read_string+0x26/0x160
RSP: 0018:
ffff88007b95eff8 EFLAGS:
00010246
RAX:
fffffbfffffffffd RBX:
ffffffffffffffed RCX:
ffff88015999cd37
RDX:
dffffc0000000000 RSI:
ffffffff81e11bc0 RDI:
ffffffffffffffed
RBP:
ffff88007b95f020 R08:
0000000000000000 R09:
0000000000000000
R10:
ffff88007b90f7cf R11:
0000000000000000 R12:
ffff88007b95f0a0
R13:
00000000fffffffa R14:
ffffffff81e11bc0 R15:
ffff880159ea37a0
FS:
00007ff35f46c700(0000) GS:
ffff88015b800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
000000008005003b
CR2:
ffffffffffffffed CR3:
000000007b8be000 CR4:
00000000001006f0
Stack:
ffff88015999cd20 ffffffff81e11bc0 ffff88007b95f0a0 ffff88007b383dd8
ffff880159ea37a0 ffff88007b95f048 ffffffff81677d03 ffff88007b952460
ffffffff81e11bc0 ffff88007b95f0a0 ffff88007b95f070 ffffffff81677d40
Call Trace:
[<
ffffffff81677d03>] fwnode_property_read_string+0x43/0x50
[<
ffffffff81677d40>] device_property_read_string+0x30/0x40
...
Fixes:
362c0b30249e (device property: Fallback to secondary fwnode if primary misses the property)
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Bob Moore [Fri, 19 Feb 2016 06:17:36 +0000 (14:17 +0800)]
ACPICA: Revert "Parser: Fix for SuperName method invocation"
ACPICA commit
eade8f78f2aa21e8eabc3380a5728db47273bcf1
Revert commit
ae90fbf562d7 (ACPICA: Parser: Fix for SuperName method
invocation).
Support for method invocations as part of super_name will be
removed from the ACPI specification, since no AML interpreter
supports it.
Fixes:
ae90fbf562d7 (ACPICA: Parser: Fix for SuperName method invocation)
Link: https://github.com/acpica/acpica/commit/eade8f78
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>