GitHub/exynos8895/android_kernel_samsung_universal8895.git
10 years agonet: Add net_dev_start_xmit trace event, exposing more skb fields
Ben Hutchings [Fri, 10 Jan 2014 22:17:03 +0000 (22:17 +0000)]
net: Add net_dev_start_xmit trace event, exposing more skb fields

The existing net/net_dev_xmit trace event provides little information
about the skb that has been passed to the driver, and it is not
simple to add more since the skb may already have been freed at
the point the event is emitted.

Add a separate trace event before the skb is passed to the driver,
including most fields that are likely to be interesting for debugging
driver datapath behaviour.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: Fix indentation in dev_hard_start_xmit()
Ben Hutchings [Fri, 10 Jan 2014 22:16:30 +0000 (22:16 +0000)]
net: Fix indentation in dev_hard_start_xmit()

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
David S. Miller [Tue, 14 Jan 2014 22:37:09 +0000 (14:37 -0800)]
Merge git://git./linux/kernel/git/davem/net

10 years agoMerge branch 'skb_checksum_help'
David S. Miller [Tue, 14 Jan 2014 22:24:25 +0000 (14:24 -0800)]
Merge branch 'skb_checksum_help'

Paul Durrant says:

====================
make skb_checksum_setup generally available

Both xen-netfront and xen-netback need to be able to set up the partial
checksum offset of an skb and may also need to recalculate the pseudo-
header checksum in the process. This functionality is currently private
and duplicated between the two drivers.

Patch #1 of this series moves the implementation into the core network code
as there is nothing xen-specific about it and it is potentially useful to
any network driver.
Patch #2 removes the private implementation from netback.
Patch #3 removes the private implementation from netfront.

v2:
- Put skb_checksum_setup in skbuff.c rather than dev.c
- remove inline
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoxen-netfront: use new skb_checksum_setup function
Paul Durrant [Thu, 9 Jan 2014 10:02:48 +0000 (10:02 +0000)]
xen-netfront: use new skb_checksum_setup function

Use skb_checksum_setup to set up partial checksum offsets rather
then a private implementation.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoxen-netback: use new skb_checksum_setup function
Paul Durrant [Thu, 9 Jan 2014 10:02:47 +0000 (10:02 +0000)]
xen-netback: use new skb_checksum_setup function

Use skb_checksum_setup to set up partial checksum offsets rather
then a private implementation.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: add skb_checksum_setup
Paul Durrant [Thu, 9 Jan 2014 10:02:46 +0000 (10:02 +0000)]
net: add skb_checksum_setup

This patch adds a function to set up the partial checksum offset for IP
packets (and optionally re-calculate the pseudo-header checksum) into the
core network code.
The implementation was previously private and duplicated between xen-netback
and xen-netfront, however it is not xen-specific and is potentially useful
to any network driver.

Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Veaceslav Falico <vfalico@redhat.com>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobridge: move br_net_exit() to br.c
WANG Cong [Fri, 10 Jan 2014 21:58:47 +0000 (13:58 -0800)]
bridge: move br_net_exit() to br.c

And it can become static.

Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: usbnet: fix SG initialisation
Bjørn Mork [Fri, 10 Jan 2014 22:10:17 +0000 (23:10 +0100)]
net: usbnet: fix SG initialisation

Commit 60e453a940ac ("USBNET: fix handling padding packet")
added an extra SG entry in case padding is necessary, but
failed to update the initialisation of the list. This can
cause list traversal to fall off the end of the list,
resulting in an oops.

Fixes: 60e453a940ac ("USBNET: fix handling padding packet")
Reported-by: Thomas Kear <thomas@kear.co.nz>
Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Tested-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: 3com: fix warning for incorrect type in argument
dingtianhong [Sat, 11 Jan 2014 08:23:37 +0000 (16:23 +0800)]
net: 3com: fix warning for incorrect type in argument

The commit c466a9b2b329f7d9982c14eedc83a923d3bc711c
(net: 3com: slight optimization of addr compare)
cause a warning: "passing argument 1 of 'ether_addr_equal'
from incompatible pointer type", so fix it.

I think julia will convert ether_addr_equal to ether_addr_equal_64bits later.

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: qlcnic: fix warning for incorrect type in argument
dingtianhong [Sat, 11 Jan 2014 08:23:35 +0000 (16:23 +0800)]
net: qlcnic: fix warning for incorrect type in argument

The commit 6878f79a8b71e8c7b0587a1185584f54fd31f185
(net: qlcnic: slight optimization of addr compare)
cause a warning "sparse: incorrect type in argument 2
(different type sizes)", so fix it.

I think julia will convert ether_addr_equal to ether_addr_equal_64bits later.

Cc: Himanshu Madhani <himanshu.madhani@qlogic.com>
Cc: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Ding Tianhong <dingtianhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agosh_eth: fix garbled TX error message
Sergei Shtylyov [Fri, 10 Jan 2014 23:41:49 +0000 (02:41 +0300)]
sh_eth: fix garbled TX error message

sh_eth_error() in case of a TX error tries to print a message using 2 dev_err()
calls with the first string not finished by '\n', so that the resulting message
would inevitably come out garbled, with something like "3net eth0: " inserted
in the middle.  Avoid that by merging 2 calls into one.

While at it, insert an empty line after the nearby declaration.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec...
David S. Miller [Tue, 14 Jan 2014 07:14:25 +0000 (23:14 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec-next

Conflicts:
net/xfrm/xfrm_policy.c

Steffen Klassert says:

====================
This pull request has a merge conflict between commits be7928d20bab
("net: xfrm: xfrm_policy: fix inline not at beginning of declaration") and
da7c224b1baa ("net: xfrm: xfrm_policy: silence compiler warning") from
the net-next tree and commit 2f3ea9a95c58 ("xfrm: checkpatch erros with
inline keyword position") from the ipsec-next tree.

The version from net-next can be used, like it is done in linux-next.

1) Checkpatch cleanups, from Weilong Chen.

2) Fix lockdep complaints when pktgen is used with IPsec,
   from Fan Du.

3) Update pktgen to allow any combination of IPsec transport/tunnel mode
   and AH/ESP/IPcomp type, from Fan Du.

4) Make pktgen_dst_metrics static, Fengguang Wu.

5) Compile fix for pktgen when CONFIG_XFRM is not set,
   from Fan Du.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoinet_diag: fix inet_diag_dump_icsk() to use correct state for timewait sockets
Neal Cardwell [Fri, 10 Jan 2014 20:34:45 +0000 (15:34 -0500)]
inet_diag: fix inet_diag_dump_icsk() to use correct state for timewait sockets

Fix inet_diag_dump_icsk() to reflect the fact that both TCP_TIME_WAIT
and TCP_FIN_WAIT2 connections are represented by inet_timewait_sock
(not just TIME_WAIT), and for such sockets the tw_substate field holds
the real state, which can be either TCP_TIME_WAIT or TCP_FIN_WAIT2.

This brings the inet_diag state-matching code in line with the field
it uses to populate idiag_state. This is also analogous to the info
exported in /proc/net/tcp, where get_tcp4_sock() exports sk->sk_state
and get_timewait4_sock() exports tw->tw_substate.

Before fixing this, (a) neither "ss -nemoi" nor "ss -nemoi state
fin-wait-2" would return a socket in TCP_FIN_WAIT2; and (b) "ss -nemoi
state time-wait" would also return sockets in state TCP_FIN_WAIT2.

This is an old bug that predates 05dbc7b ("tcp/dccp: remove twchain").

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'bonding_rcu'
David S. Miller [Tue, 14 Jan 2014 06:22:35 +0000 (22:22 -0800)]
Merge branch 'bonding_rcu'

Veaceslav Falico says:

====================
bonding: fix bond_3ad RCU usage

While digging through bond_3ad.c I've found that the RCU usage there is
just wrong - it's used as a kind of mutex/spinlock instead of RCU.

v3->v4: remove useless goto and wrap __get_first_agg() in proper RCU.

v2->v3: make bond_3ad_set_carrier() use RCU read lock for the whole
function, so that all other functions will be protected by RCU as well.
This way we can use _rcu variants everywhere.

v1->v2: use generic primitives instead of _rcu ones cause we can hold RTNL
lock without RCU one, which is still safe.

This patchset is on top of bond_3ad.c cleanup:
http://www.spinics.net/lists/netdev/msg265447.html
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobonding: fix __get_active_agg() RCU logic
Veaceslav Falico [Fri, 10 Jan 2014 10:59:45 +0000 (11:59 +0100)]
bonding: fix __get_active_agg() RCU logic

Currently, the implementation is meaningless - once again, we take the
slave structure and use it after we've exited RCU critical section.

Fix this by removing the rcu_read_lock() from __get_active_agg(), and
ensuring that all its callers are holding RCU.

Fixes: be79bd048 ("bonding: add RCU for bond_3ad_state_machine_handler()")
CC: dingtianhong@huawei.com
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobonding: fix __get_first_agg RCU usage
Veaceslav Falico [Fri, 10 Jan 2014 10:59:44 +0000 (11:59 +0100)]
bonding: fix __get_first_agg RCU usage

Currently, the RCU read lock usage is just wrong - it gets the slave struct
under RCU and continues to use it when RCU lock is released.

However, it's still safe to do this cause we didn't need the
rcu_read_lock() initially - all of the __get_first_agg() callers are either
holding RCU read lock or the RTNL lock, so that we can't sync while in it.

Fixes: be79bd048 ("bonding: add RCU for bond_3ad_state_machine_handler()")
CC: dingtianhong@huawei.com
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobonding: fix bond_3ad_set_carrier() RCU usage
Veaceslav Falico [Fri, 10 Jan 2014 10:59:43 +0000 (11:59 +0100)]
bonding: fix bond_3ad_set_carrier() RCU usage

Currently, its usage is just plainly wrong. It first gets a slave under
RCU, and, after releasing the RCU lock, continues to use it - whilst it can
be freed.

Fix this by ensuring that bond_3ad_set_carrier() holds RCU till it uses its
slave (or its agg).

Fixes: be79bd048ab ("bonding: add RCU for bond_3ad_state_machine_handler()")
CC: dingtianhong@huawei.com
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge
David S. Miller [Tue, 14 Jan 2014 05:50:27 +0000 (21:50 -0800)]
Merge tag 'batman-adv-for-davem' of git://git.open-mesh.org/linux-merge

Included changes:
- drop dependency against CRC16
- move to new release version
- add size check at compile time for packet structs
- update copyright years in every file
- implement new bonding/interface alternation feature

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: resort some Kbuild files to hopefully help avoid some conflicts
Stephen Rothwell [Tue, 14 Jan 2014 05:37:45 +0000 (16:37 +1100)]
net: resort some Kbuild files to hopefully help avoid some conflicts

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'qlcnic'
David S. Miller [Mon, 13 Jan 2014 23:31:42 +0000 (15:31 -0800)]
Merge branch 'qlcnic'

Shahed Shaikh says:

====================
This series includes following changes:
o SRIOV and VLAN filtering related enhancements which includes
   - Do MAC learning for PF
   - Restrict VF from configuring any VLAN mode
   - Enable flooding on PF
   - Turn on promiscuous mode for PF

o Bug fix in qlcnic_sriov_cleanup() introduced by commit
  154d0c81("qlcnic: VLAN enhancement for 84XX adapters")

o Beaconing support for 83xx and 84xx series adapters

o Allow 82xx adapter to perform IPv6 LRO even if destination IP address is not
  programmed.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoqlcnic: Update version to 5.3.54
Shahed Shaikh [Fri, 10 Jan 2014 16:48:59 +0000 (11:48 -0500)]
qlcnic: Update version to 5.3.54

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoqlcnic: Enable IPv6 LRO even if IP address is not programmed
Shahed Shaikh [Fri, 10 Jan 2014 16:48:58 +0000 (11:48 -0500)]
qlcnic: Enable IPv6 LRO even if IP address is not programmed

o Enabling BIT_9 while configuring hardware LRO allows adapter to
  perform LRO even if destination IP address is not programmed in adapter.

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoqlcnic: Fix SR-IOV cleanup code path
Manish Chopra [Fri, 10 Jan 2014 16:48:57 +0000 (11:48 -0500)]
qlcnic: Fix SR-IOV cleanup code path

o Add __QLCNIC_SRIOV_ENABLE bit check before doing SRIOV cleanup

Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoqlcnic: Enable beaconing for 83xx/84xx Series adapter.
Himanshu Madhani [Fri, 10 Jan 2014 16:48:56 +0000 (11:48 -0500)]
qlcnic: Enable beaconing for 83xx/84xx Series adapter.

o Refactored code to handle beaconing test for all adapters.
o Use GET_LED_CONFIG mailbox command for 83xx/84xx series adapter
  to detect current beaconing state of the adapter.

Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoqlcnic: Do MAC learning for SRIOV PF.
Sucheta Chakraborty [Fri, 10 Jan 2014 16:48:55 +0000 (11:48 -0500)]
qlcnic: Do MAC learning for SRIOV PF.

o MAC learning will be done for SRIOV PF to help program VLAN filters
  onto adapter. This will help VNIC traffic to flow through without
  flooding traffic.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoqlcnic: Turn on promiscous mode for SRIOV PF.
Sucheta Chakraborty [Fri, 10 Jan 2014 16:48:54 +0000 (11:48 -0500)]
qlcnic: Turn on promiscous mode for SRIOV PF.

o By default, SRIOV PF will have promiscous mode on.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoqlcnic: Enable VF flood bit on PF.
Sucheta Chakraborty [Fri, 10 Jan 2014 16:48:53 +0000 (11:48 -0500)]
qlcnic: Enable VF flood bit on PF.

o On enabling VF flood bit, PF driver will  be able to receive traffic
  from all its VFs.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoqlcnic: Restrict VF from configuring any VLAN mode.
Sucheta Chakraborty [Fri, 10 Jan 2014 16:48:52 +0000 (11:48 -0500)]
qlcnic: Restrict VF from configuring any VLAN mode.

o Adapter should allow vlan traffic only for vlans configured on a VF.
  On configuring any vlan mode from VF, adapter will allow any vlan
  traffic to pass for that VF. Do not allow VF to configure this mode.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: make dev_set_mtu() honor notification return code
Veaceslav Falico [Fri, 10 Jan 2014 15:56:25 +0000 (16:56 +0100)]
net: make dev_set_mtu() honor notification return code

Currently, after changing the MTU for a device, dev_set_mtu() calls
NETDEV_CHANGEMTU notification, however doesn't verify it's return code -
which can be NOTIFY_BAD - i.e. some of the net notifier blocks refused this
change, and continues nevertheless.

To fix this, verify the return code, and if it's an error - then revert the
MTU to the original one, notify again and pass the error code.

CC: Jiri Pirko <jiri@resnulli.us>
CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <edumazet@google.com>
CC: Alexander Duyck <alexander.h.duyck@intel.com>
CC: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agopacket: doc: describe PACKET_MMAP with one packet socket for rx and tx
Norbert van Bolhuis [Fri, 10 Jan 2014 09:22:37 +0000 (10:22 +0100)]
packet: doc: describe PACKET_MMAP with one packet socket for rx and tx

Document how to use one AF_PACKET mmap socket for RX and TX.

Signed-off-by: Norbert van Bolhuis <nvbolhuis@aimvalley.nl>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agosctp: make sctp_addto_chunk_fixed local
stephen hemminger [Fri, 10 Jan 2014 06:31:11 +0000 (22:31 -0800)]
sctp: make sctp_addto_chunk_fixed local

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agophylib: Add of_phy_attach
Andy Fleming [Fri, 10 Jan 2014 06:28:11 +0000 (14:28 +0800)]
phylib: Add of_phy_attach

10G PHYs don't currently support running the state machine, which
is implicitly setup via of_phy_connect(). Therefore, it is necessary
to implement an OF version of phy_attach(), which does everything
except start the state machine.

Signed-off-by: Andy Fleming <afleming@gmail.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agophylib: Support attaching to generic 10g driver
Andy Fleming [Fri, 10 Jan 2014 06:27:54 +0000 (14:27 +0800)]
phylib: Support attaching to generic 10g driver

phy_attach_direct() may now attach to a generic 10G driver. It can
also be used exactly as phy_connect_direct(), which will be useful
when using of_mdio, as phy_connect (and therefore of_phy_connect)
start the PHY state machine, which is currently irrelevant for 10G
PHYs.

Signed-off-by: Andy Fleming <afleming@gmail.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agophylib: Add generic 10G driver
Andy Fleming [Fri, 10 Jan 2014 06:27:37 +0000 (14:27 +0800)]
phylib: Add generic 10G driver

Very incomplete, but will allow for binding an ethernet controller
to it.

Signed-off-by: Andy Fleming <afleming@gmail.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agophylib: turn genphy_driver to an array
Shaohui Xie [Fri, 10 Jan 2014 06:27:22 +0000 (14:27 +0800)]
phylib: turn genphy_driver to an array

Then other generic phy driver such as generic 10g phy driver can join it.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agophylib: introduce PHY_INTERFACE_MODE_XGMII for 10G PHY
Andy Fleming [Fri, 10 Jan 2014 06:26:46 +0000 (14:26 +0800)]
phylib: introduce PHY_INTERFACE_MODE_XGMII for 10G PHY

Signed-off-by: Andy Fleming <afleming@gmail.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agophylib: Add Clause 45 read/write functions
Andy Fleming [Fri, 10 Jan 2014 06:25:09 +0000 (14:25 +0800)]
phylib: Add Clause 45 read/write functions

Need an extra parameter to read or write Clause 45 PHYs, so
need a different API with the extra parameter.

Signed-off-by: Andy Fleming <afleming@gmail.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agol2tp: make local functions static
stephen hemminger [Fri, 10 Jan 2014 06:22:27 +0000 (22:22 -0800)]
l2tp: make local functions static

Avoid needless export of local functions

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobnx2x: namespace and dead code cleanups
stephen hemminger [Fri, 10 Jan 2014 06:20:11 +0000 (22:20 -0800)]
bnx2x: namespace and dead code cleanups

Fix a bunch of whole lot of namespace issues with the Broadcom bnx2x driver
found by running 'make namespacecheck'

 * global variables must be prefixed with bnx2x_
    naming a variable int_mode, or num_queue is invitation to disaster

 * make local functions static

 * move some inline's used in one file out of header
   (this driver has a bad case of inline-itis)

 * remove resulting dead code fallout
   bnx2x_pfc_statistic,
 bnx2x_emac_get_pfc_stat
   bnx2x_init_vlan_mac_obj,
   Looks like vlan mac support in this driver was a botch from day one
   either never worked, or not implemented or missing support functions

Compile tested only.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agodrivers: net: silence compiler warning in smc91x.c
Pankaj Dubey [Fri, 10 Jan 2014 03:04:06 +0000 (12:04 +0900)]
drivers: net: silence compiler warning in smc91x.c

If used 64 bit compiler GCC warns that:

drivers/net/ethernet/smsc/smc91x.c:1897:7:
warning: cast from pointer to integer of different
size [-Wpointer-to-int-cast]

This patch fixes this by changing typecast from "unsigned int" to "unsigned long"

CC: "David S. Miller" <davem@davemloft.net>
CC: Jingoo Han <jg1.han@samsung.com>
CC: netdev@vger.kernel.org
Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agogre_offload: simplify GRE header length calculation in gre_gso_segment()
Neal Cardwell [Fri, 10 Jan 2014 01:47:17 +0000 (20:47 -0500)]
gre_offload: simplify GRE header length calculation in gre_gso_segment()

Simplify the GRE header length calculation in gre_gso_segment().
Switch to an approach that is simpler, faster, and more general. The
new approach will continue to be correct even if we add support for
the optional variable-length routing info that may be present in a GRE
header.

Signed-off-by: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: H.K. Jerry Chu <hkchu@google.com>
Cc: Pravin B Shelar <pshelar@nicira.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet_sched: act: remove struct tcf_act_hdr
WANG Cong [Fri, 10 Jan 2014 00:14:05 +0000 (16:14 -0800)]
net_sched: act: remove struct tcf_act_hdr

It is not necessary at all.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet_sched: avoid casting void pointer
WANG Cong [Fri, 10 Jan 2014 00:14:03 +0000 (16:14 -0800)]
net_sched: avoid casting void pointer

tp->root is a void* pointer, no need to cast it.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet_sched: optimize tcf_match_indev()
WANG Cong [Fri, 10 Jan 2014 00:14:02 +0000 (16:14 -0800)]
net_sched: optimize tcf_match_indev()

tcf_match_indev() is called in fast path, it is not wise to
search for a netdev by ifindex and then compare by its name,
just compare the ifindex.

Also, dev->name could be changed by user-space, therefore
the match would be always fail, but dev->ifindex could
be consistent.

BTW, this will also save some bytes from the core struct of u32.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet_sched: add struct net pointer to tcf_proto_ops->dump
WANG Cong [Fri, 10 Jan 2014 00:14:01 +0000 (16:14 -0800)]
net_sched: add struct net pointer to tcf_proto_ops->dump

It will be needed by the next patch.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet_sched: act: clean up notification functions
WANG Cong [Fri, 10 Jan 2014 00:14:00 +0000 (16:14 -0800)]
net_sched: act: clean up notification functions

Refactor tcf_add_notify() and factor out tcf_del_notify().

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet_sched: act: move idx_gen into struct tcf_hashinfo
WANG Cong [Fri, 10 Jan 2014 00:13:59 +0000 (16:13 -0800)]
net_sched: act: move idx_gen into struct tcf_hashinfo

There is no need to store the index separatedly
since tcf_hashinfo is allocated statically too.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet: gro: change GRO overflow strategy
Eric Dumazet [Thu, 9 Jan 2014 22:12:19 +0000 (14:12 -0800)]
net: gro: change GRO overflow strategy

GRO layer has a limit of 8 flows being held in GRO list,
for performance reason.

When a packet comes for a flow not yet in the list,
and list is full, we immediately give it to upper
stacks, lowering aggregation performance.

With TSO auto sizing and FQ packet scheduler, this situation
happens more often.

This patch changes strategy to simply evict the oldest flow of
the list. This works better because of the nature of packet
trains for which GRO is efficient. This also has the effect
of lowering the GRO latency if many flows are competing.

Tested :

Used a 40Gbps NIC, with 4 RX queues, and 200 concurrent TCP_STREAM
netperf.

Before patch, aggregate rate is 11Gbps (while a single flow can reach
30Gbps)

After patch, line rate is reached.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jerry Chu <hkchu@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agonet/mlx4_en: call gro handler for encapsulated frames
Eric Dumazet [Thu, 9 Jan 2014 18:30:13 +0000 (10:30 -0800)]
net/mlx4_en: call gro handler for encapsulated frames

In order to use the native GRO handling of encapsulated protocols on
mlx4, we need to call napi_gro_receive() instead of netif_receive_skb()
unless busy polling is in action.

While we are at it, rename mlx4_en_cq_ll_polling() to
mlx4_en_cq_busy_polling()

Tested with GRE tunnel : GRO aggregation is now performed on the
ethernet device instead of being done later on gre device.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Amir Vadai <amirv@mellanox.com>
Cc: Jerry Chu <hkchu@google.com>
Cc: Or Gerlitz <ogerlitz@mellanox.com>
Acked-By: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agogre_offload: fix sparse non static symbol warning
Wei Yongjun [Thu, 9 Jan 2014 14:22:05 +0000 (22:22 +0800)]
gre_offload: fix sparse non static symbol warning

Fixes the following sparse warning:

net/ipv4/gre_offload.c:253:5: warning:
 symbol 'gre_gro_complete' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'ip_forward_pmtu'
David S. Miller [Mon, 13 Jan 2014 19:23:02 +0000 (11:23 -0800)]
Merge branch 'ip_forward_pmtu'

Hannes Frederic Sowa says:

====================
path mtu hardening patches

After a lot of back and forth I want to propose these changes regarding
path mtu hardening and give an outline why I think this is the best way
how to proceed:

This set contains the following patches:
* ipv4: introduce ip_dst_mtu_maybe_forward and protect forwarding path against pmtu spoofing
* ipv6: introduce ip6_dst_mtu_forward and protect forwarding path with it
* ipv4: introduce hardened ip_no_pmtu_disc mode

The first one switches the forwarding path of IPv4 to use the interface
mtu by default and ignore a possible discovered path mtu. It provides
a sysctl to switch back to the original behavior (see discussion below).

The second patch does the same thing unconditionally for IPv6. I don't
provide a knob for IPv6 to switch to original behavior (please see
below).

The third patch introduces a hardened pmtu mode, where only pmtu
information are accepted where the protocol is able to do more stringent
checks on the icmp piggyback payload (please see the patch commit msg
for further details).

Why is this change necessary?

First of all, RFC 1191 4. Router specification says:
"When a router is unable to forward a datagram because it exceeds the
 MTU of the next-hop network and its Don't Fragment bit is set, the
 router is required to return an ICMP Destination Unreachable message
 to the source of the datagram, with the Code indicating
 "fragmentation needed and DF set". ..."

For some time now fragmentation has been considered problematic, e.g.:
* http://www.hpl.hp.com/techreports/Compaq-DEC/WRL-87-3.pdf
* http://tools.ietf.org/search/rfc4963

Most of them seem to agree that fragmentation should be avoided because
of efficiency, data corruption or security concerns.

Recently it was shown possible that correctly guessing IP ids could lead
to data injection on DNS packets:
<https://sites.google.com/site/hayashulman/files/fragmentation-poisoning.pdf>

While we can try to completly stop fragmentation on the end host
(this is e.g. implemented via IP_PMTUDISC_INTERFACE), we cannot stop
fragmentation completly on the forwarding path. On the end host the
application has to deal with MTUs and has to choose fallback methods
if fragmentation could be an attack vector. This is already the case for
most DNS software, where a maximum UDP packet size can be configured. But
until recently they had no control over local fragmentation and could
thus emit fragmented packets.

On the forwarding path we can just try to delay the fragmentation to
the last hop where this is really necessary. Current kernel already does
that but only because routers don't receive feedback of path mtus, these are
only send back to the end host system. But it is possible to maliciously
insert path mtu inforamtion via ICMP packets which have an icmp echo_reply
payload, because we cannot validate those notifications against local
sockets. DHCP clients which establish an any-bound RAW-socket could also
start processing unwanted fragmentation-needed packets.

Why does IPv4 has a knob to revert to old behavior while IPv6 doesn't?

IPv4 does fragmentation on the path while IPv6 does always respond with
packet-too-big errors. The interface MTU will always be greater than
the path MTU information. So we would discard packets we could actually
forward because of malicious information. After this change we would
let the hop, which really could not forward the packet, notify the host
of this problem.

IPv4 allowes fragmentation mid-path. In case someone does use a software
which tries to discover such paths and assumes that the kernel is handling
the discovered pmtu information automatically. This should be an extremly
rare case, but because I could not exclude the possibility this knob is
provided. Also this software could insert non-locked mtu information
into the kernel. We cannot distinguish that from path mtu information
currently. Premature fragmentation could solve some problems in wrongly
configured networks, thus this switch is provided.

One frag-needed packet could reduce the path mtu down to 522 bytes
(route/min_pmtu).

Misc:

IPv6 neighbor discovery could advertise mtu information for an
interface. These information update the ipv6-specific interface mtu and
thus get used by the forwarding path.

Tunnel and xfrm output path will still honour path mtu and also respond
with Packet-too-Big or fragmentation-needed errors if needed.

Changelog for all patches:
v2)
* enabled ip_forward_use_pmtu by default
* reworded
v3)
* disabled ip_forward_use_pmtu by default
* reworded
v4)
* renamed ip_dst_mtu_secure to ip_dst_mtu_maybe_forward
* updated changelog accordingly
* removed unneeded !!(... & ...) double negations

v2)
* by default we honour pmtu information
3)
* only honor interface mtu
* rewritten and simplified
* no knob to fall back to old mode any more

v2)
* reworded Documentation
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoipv4: introduce hardened ip_no_pmtu_disc mode
Hannes Frederic Sowa [Thu, 9 Jan 2014 09:01:17 +0000 (10:01 +0100)]
ipv4: introduce hardened ip_no_pmtu_disc mode

This new ip_no_pmtu_disc mode only allowes fragmentation-needed errors
to be honored by protocols which do more stringent validation on the
ICMP's packet payload. This knob is useful for people who e.g. want to
run an unmodified DNS server in a namespace where they need to use pmtu
for TCP connections (as they are used for zone transfers or fallback
for requests) but don't want to use possibly spoofed UDP pmtu information.

Currently the whitelisted protocols are TCP, SCTP and DCCP as they check
if the returned packet is in the window or if the association is valid.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: John Heffner <johnwheffner@gmail.com>
Suggested-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoipv6: introduce ip6_dst_mtu_forward and protect forwarding path with it
Hannes Frederic Sowa [Thu, 9 Jan 2014 09:01:16 +0000 (10:01 +0100)]
ipv6: introduce ip6_dst_mtu_forward and protect forwarding path with it

In the IPv6 forwarding path we are only concerend about the outgoing
interface MTU, but also respect locked MTUs on routes. Tunnel provider
or IPSEC already have to recheck and if needed send PtB notifications
to the sending host in case the data does not fit into the packet with
added headers (we only know the final header sizes there, while also
using path MTU information).

The reason for this change is, that path MTU information can be injected
into the kernel via e.g. icmp_err protocol handler without verification
of local sockets. As such, this could cause the IPv6 forwarding path to
wrongfully emit Packet-too-Big errors and drop IPv6 packets.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: John Heffner <johnwheffner@gmail.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoipv4: introduce ip_dst_mtu_maybe_forward and protect forwarding path against pmtu...
Hannes Frederic Sowa [Thu, 9 Jan 2014 09:01:15 +0000 (10:01 +0100)]
ipv4: introduce ip_dst_mtu_maybe_forward and protect forwarding path against pmtu spoofing

While forwarding we should not use the protocol path mtu to calculate
the mtu for a forwarded packet but instead use the interface mtu.

We mark forwarded skbs in ip_forward with IPSKB_FORWARDED, which was
introduced for multicast forwarding. But as it does not conflict with
our usage in unicast code path it is perfect for reuse.

I moved the functions ip_sk_accept_pmtu, ip_sk_use_pmtu and ip_skb_dst_mtu
along with the new ip_dst_mtu_maybe_forward to net/ip.h to fix circular
dependencies because of IPSKB_FORWARDED.

Because someone might have written a software which does probe
destinations manually and expects the kernel to honour those path mtus
I introduced a new per-namespace "ip_forward_use_pmtu" knob so someone
can disable this new behaviour. We also still use mtus which are locked on a
route for forwarding.

The reason for this change is, that path mtus information can be injected
into the kernel via e.g. icmp_err protocol handler without verification
of local sockets. As such, this could cause the IPv4 forwarding path to
wrongfully emit fragmentation needed notifications or start to fragment
packets along a path.

Tunnel and ipsec output paths clear IPCB again, thus IPSKB_FORWARDED
won't be set and further fragmentation logic will use the path mtu to
determine the fragmentation size. They also recheck packet size with
help of path mtu discovery and report appropriate errors.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: John Heffner <johnwheffner@gmail.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoHHF qdisc: fix jiffies-time conversion.
Terry Lam [Thu, 9 Jan 2014 08:40:00 +0000 (00:40 -0800)]
HHF qdisc: fix jiffies-time conversion.

This is to be compatible with the use of "get_time" (i.e. default
time unit in us) in iproute2 patch for HHF as requested by Stephen.

Signed-off-by: Terry Lam <vtlam@google.com>
Acked-by: Nandita Dukkipati <nanditad@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoqlcnic: Convert vmalloc/memset to kcalloc
Joe Perches [Thu, 9 Jan 2014 06:42:25 +0000 (22:42 -0800)]
qlcnic: Convert vmalloc/memset to kcalloc

vmalloc is a limited resource.  Don't use it unnecessarily.

It seems this allocation should work with kcalloc.

Remove unnecessary memset(,0,) of buf as it's completely
overwritten as the previously only unset field in
struct qlcnic_pci_func_cfg is now set to 0.

Use kfree instead of vfree.
Use ETH_ALEN instead of 6.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agocxgb4: silence shift wrapping static checker warning
Dan Carpenter [Thu, 9 Jan 2014 05:34:00 +0000 (08:34 +0300)]
cxgb4: silence shift wrapping static checker warning

I don't know how large "tp->vlan_shift" is but static checkers worry
about shift wrapping bugs here.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobonding: remove dead code from 3ad
Veaceslav Falico [Wed, 8 Jan 2014 15:46:48 +0000 (16:46 +0100)]
bonding: remove dead code from 3ad

That code has been around for ages without being used.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobonding: convert 3ad to use pr_warn instead of pr_warning
Veaceslav Falico [Wed, 8 Jan 2014 15:46:47 +0000 (16:46 +0100)]
bonding: convert 3ad to use pr_warn instead of pr_warning

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobonding: clean up style for bond_3ad.c
Veaceslav Falico [Wed, 8 Jan 2014 15:46:46 +0000 (16:46 +0100)]
bonding: clean up style for bond_3ad.c

It's a huge mess currently, that is really hard to read. This cleanup
doesn't touch the logic at all, it only breaks easy-to-fix long lines and
updates comment styles.

CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Veaceslav Falico <vfalico@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agobatman-adv: drop dependency against CRC16
Antonio Quartulli [Thu, 9 Jan 2014 14:44:57 +0000 (15:44 +0100)]
batman-adv: drop dependency against CRC16

The crc16 functionality is not used anymore, therefore
we can safely remove the dependency in the Kbuild file.

Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
10 years agobatman-adv: Start new development cycle
Simon Wunderlich [Sat, 4 Jan 2014 17:04:24 +0000 (18:04 +0100)]
batman-adv: Start new development cycle

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
10 years agobatman-adv: update copyright years for 2014
Simon Wunderlich [Sat, 4 Jan 2014 17:04:25 +0000 (18:04 +0100)]
batman-adv: update copyright years for 2014

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
10 years agobatman-adv: add build checks for packet sizes
Simon Wunderlich [Tue, 17 Dec 2013 18:12:12 +0000 (19:12 +0100)]
batman-adv: add build checks for packet sizes

With unrolling the batadv_header into the respective structures, the
offsetof checks are now useless. Instead, add build checks for all
packet types which go over the wire to avoid problems with wrong sizes
or compatibility issues on some architectures which don't use every day.

Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
10 years agobatman-adv: add missing sysfs attributes to README
Antonio Quartulli [Tue, 19 Nov 2013 07:36:29 +0000 (08:36 +0100)]
batman-adv: add missing sysfs attributes to README

Add missing sysfs attributes in the proper section of the README

Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
10 years agobatman-adv: remove returns at the end of void functions
Antonio Quartulli [Sat, 16 Nov 2013 22:02:51 +0000 (23:02 +0100)]
batman-adv: remove returns at the end of void functions

Return at the end of void functions is not needed.

Since most of the void functions in the code do not do so,
make all the others consistent by removing the useless
returns. Actually all the functions to be "fixed" are in
network-coding.h only.

Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
10 years agobatman-adv: add debugfs support to view multiif tables
Simon Wunderlich [Thu, 21 Nov 2013 10:52:16 +0000 (11:52 +0100)]
batman-adv: add debugfs support to view multiif tables

Show tables for the multi interface operation. Originator tables
are added per hard interface.

This patch also changes the API by adding the interface to the
bat_orig_print() parameters.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
10 years agobatman-adv: add debugfs structure for information per interface
Simon Wunderlich [Thu, 21 Nov 2013 13:16:12 +0000 (14:16 +0100)]
batman-adv: add debugfs structure for information per interface

To show information per interface, add a debugfs hardif structure
similar to the system in sysfs. Hard interface folders will be created
in "$debugfs/batman-adv/". Files are not yet added.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
10 years agobatman-adv: add bonding again
Simon Wunderlich [Wed, 13 Nov 2013 18:14:50 +0000 (19:14 +0100)]
batman-adv: add bonding again

With the new interface alternating, the first hop may send packets
in a round robin fashion to it's neighbors because it has multiple
valid routes built by the multi interface optimization. This patch
enables the feature if bonding is selected. Note that unlike the
bonding implemented before, this version is much simpler and may
even enable multi path routing to a certain degree.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
10 years agobatman-adv: consider outgoing interface in OGM sending
Simon Wunderlich [Wed, 13 Nov 2013 18:14:49 +0000 (19:14 +0100)]
batman-adv: consider outgoing interface in OGM sending

The current OGM sending an aggregation functionality decides on
which interfaces a packet should be sent when it parses the forward
packet struct. However, with the network wide multi interface
optimization the outgoing interface is decided by the OGM processing
function.

This is reflected by moving the decision in the OGM processing function
and add the outgoing interface in the forwarding packet struct. This
practically implies that an OGM may be added multiple times (once per
outgoing interface), and this also affects aggregation which needs to
consider the outgoing interface as well.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
10 years agobatman-adv: add WiFi penalty
Simon Wunderlich [Wed, 13 Nov 2013 18:14:48 +0000 (19:14 +0100)]
batman-adv: add WiFi penalty

If the same interface is used for sending and receiving, there might be
throughput degradation on half-duplex interfaces such as WiFi. Add a
penalty if the same interface is used to reflect this problem in the
metric. At the same time, change the hop penalty from 30 to 15 so there
will be no change for single wifi mesh network. the effective hop
penalty will stay at 30 due to the new wifi penalty for these networks.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
10 years agobatman-adv: split out router from orig_node
Simon Wunderlich [Wed, 13 Nov 2013 18:14:47 +0000 (19:14 +0100)]
batman-adv: split out router from orig_node

For the network wide multi interface optimization there are different
routers for each outgoing interface (outgoing from the OGM perspective,
incoming for payload traffic). To reflect this, change the router and
associated data to a list of routers.

While at it, rename batadv_orig_node_get_router() to
batadv_orig_router_get() to follow the new naming scheme.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
10 years agobatman-adv: split tq information in neigh_node struct
Simon Wunderlich [Wed, 13 Nov 2013 18:14:46 +0000 (19:14 +0100)]
batman-adv: split tq information in neigh_node struct

For the network wide multi interface optimization it is required to save
metrics per outgoing interface in one neighbor. Therefore a new type is
introduced to keep interface-specific information. This also requires
some changes in access and list management.

The compare and equiv_or_better API calls are changed to take the
outgoing interface into consideration.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
10 years agobatman-adv: remove bonding and interface alternating
Simon Wunderlich [Wed, 13 Nov 2013 18:14:45 +0000 (19:14 +0100)]
batman-adv: remove bonding and interface alternating

Remove bonding and interface alternating code - it will be replaced
by a new, network-wide multi interface optimization which enables
both bonding and interface alternating in a better way.

Keep the sysfs and find router function though, this will be needed
later.

Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Antonio Quartulli <antonio@meshcoding.com>
10 years agoMerge branch 'alx_stats'
David S. Miller [Sun, 12 Jan 2014 04:53:03 +0000 (20:53 -0800)]
Merge branch 'alx_stats'

Sabrina Dubroca says:

====================
alx: add statistics

Currently, the alx driver doesn't support statistics [1,2]. The
original alx driver [3] that Johannes Berg modified provided
statistics. This patch is an adaptation of the statistics code from
the original driver to the alx driver included in the kernel.

v4:
 - modified the assignements of hw stats to netstats (Ben Hutchings)
 - added comments to describe the stats fields (copied from atlx)

v3:
 - renamed __alx_update_hw_stats to alx_update_hw_stats (Stephen Hemminger)

v2:
 - use u64 instead of unsigned long  (Ben Hutchings)
 - implement ndo_get_stats64 instead of ndo_get_stats (Ben Hutchings)
 - use EINVAL instead of ENOTSUPP  (Ben Hutchings)
 - add BUILD_BUG_ON to check the size of the stats (Johannes Berg, Ben
   Hutchings)
 - add a comment regarding persistence of the stats (Stephen Hemminger)
 - align assignments in __alx_update_hw_stats

[1] https://bugzilla.kernel.org/show_bug.cgi?id=63401
[2] http://www.spinics.net/lists/netdev/msg245544.html
[3] https://github.com/mcgrof/alx
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoalx: add stats to ethtool
Sabrina Dubroca [Thu, 9 Jan 2014 09:09:31 +0000 (10:09 +0100)]
alx: add stats to ethtool

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoalx: add alx_get_stats64 operation
Sabrina Dubroca [Thu, 9 Jan 2014 09:09:30 +0000 (10:09 +0100)]
alx: add alx_get_stats64 operation

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoalx: add stats update function
Sabrina Dubroca [Thu, 9 Jan 2014 09:09:29 +0000 (10:09 +0100)]
alx: add stats update function

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoalx: add constants for the stats fields
Sabrina Dubroca [Thu, 9 Jan 2014 09:09:28 +0000 (10:09 +0100)]
alx: add constants for the stats fields

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoalx: add a hardware stats structure
Sabrina Dubroca [Thu, 9 Jan 2014 09:09:27 +0000 (10:09 +0100)]
alx: add a hardware stats structure

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net...
David S. Miller [Sun, 12 Jan 2014 04:51:10 +0000 (20:51 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/jkirsher/net-next

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates

This series contains updates to i40e and now i40evf.

Most notable is Jacob's patch to add PTP support to i40e.

Mitch cleans up additional memcpy's and use struct assignment instead.
Then fixes long lines to appease checkpatch.pl.  Mitch then provides
a fix to keep us from spamming the log with confusing errors.  If you
use ip to change the MAC address of a VF while the VF driver is loaded,
closing the VF interface or unloading the VF driver will cause the VF
driver to remove the MAC filter for its original (now invalid) MAC
address.

Jesse cleans up macros which are no longer needed or used.

I (Jeff) cleanup function header comments to ensure Doxygen/kdoc works
correctly to generate documentation without warnings.

Anjali fixes a bug where ethtool set-channels would return failure when
configuring only one Rx queue.  Then fixes a bug where the driver was
erroneously exiting the driver unload path if one part of the unload
failed.

Shannon fixes if the IPV6EXADD but is set in the Rx descriptor status,
there was an optional extension header with an alternate IP address
detected and the hardware checksum was not handling the alternate IP
address correctly.  Then adjusts the ITR max and min values to match
the hardware max value and recommended min value.  Shannon makes sure
to clear the PXE mode after the adminq is initialized.

v2:
 - fix patch 14 "i40e: enable PTP" to address Richard Cochran's spelling
   catch and Ben Hutchings Kconfig, SIOCGHWTSTAMP and sizeof() suggestions
 - added Paul Gortmaker's i40evf fix patch
v3:
 - fix patch 14 "i40e: enable PTP" to address Ben Hutchings concerns about
   a race with PTP init and cleanup and i40e_get_ts_info().
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
10 years agoi40evf: fix s390 build failure due to implicit prefetch.h
Paul Gortmaker [Sat, 11 Jan 2014 04:00:31 +0000 (04:00 +0000)]
i40evf: fix s390 build failure due to implicit prefetch.h

As of commit 7f12ad741a4870b8b6e3aafbcd868d0191770802 ("i40evf: transmit
and receive functionality") the s390 builds (allyesconfig) fail with:

drivers/net/ethernet/intel/i40evf/i40e_txrx.c: In function 'i40e_clean_rx_irq':
drivers/net/ethernet/intel/i40evf/i40e_txrx.c:818:3: error: implicit declaration of function 'prefetch'
make[5]: *** [drivers/net/ethernet/intel/i40evf/i40e_txrx.o] Error 1

due to an implicit assumption that the prototype from linux/prefetch.h
will be present.

Cc: Mitch Williams <mitch.a.williams@intel.com>
Cc: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: Bump version
Catherine Sullivan [Sat, 21 Dec 2013 05:44:52 +0000 (05:44 +0000)]
i40e: Bump version

Update the driver version to 0.3.28-k.

Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: fix log message wording
Shannon Nelson [Sat, 21 Dec 2013 05:44:51 +0000 (05:44 +0000)]
i40e: fix log message wording

Change the redundant "vsi VSI" to VSI.

Change-ID: Ic16ea5820a99abc7831713cde39e7d032a7ba4d3
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: enable PTP
Jacob Keller [Sat, 11 Jan 2014 05:43:19 +0000 (05:43 +0000)]
i40e: enable PTP

New feature: Enable PTP support in the i40e driver.

Change-ID: I6a8e799f582705191f9583afb1b9231a8db96cc8
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Matthew Vick <matthew.vick@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: call clear_pxe after adminq is initialized
Shannon Nelson [Sat, 21 Dec 2013 05:44:49 +0000 (05:44 +0000)]
i40e: call clear_pxe after adminq is initialized

In the latest firmware the clear_pxe_mode function will use the
AdminQ request, so call this after AdminQ is set up rather than
relying on i40e_pf_reset() to clear the PXE mode.

Change-ID: Ice8cba2e9cbc3c7bde0a0bcf8eaf5009abef040b
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: clear qtx_head before enabling Tx queue
Shannon Nelson [Sat, 21 Dec 2013 05:44:48 +0000 (05:44 +0000)]
i40e: clear qtx_head before enabling Tx queue

Make sure the "new" qtx_head[q] register is cleared before
enabling the Tx queue.

Change-ID: I0c7a12815e343a5ae68807af172a35d6c6857935
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: adjust ITR max and min values
Shannon Nelson [Sat, 21 Dec 2013 05:44:47 +0000 (05:44 +0000)]
i40e: adjust ITR max and min values

Set the ITR max and min values to match the hardware max value
and the recommended min value.  These values are shifted right
one bit because the register counts in 2 usec units, so leave
a comment to explain.

Change-ID: I289c27955cf6c566a6d21b95c3110b88cbb15dad
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: check for possible incorrect ipv6 checksum
Shannon Nelson [Sat, 21 Dec 2013 05:44:46 +0000 (05:44 +0000)]
i40e: check for possible incorrect ipv6 checksum

If the IPV6EXADD bit is set in the Rx descriptor status, there
was an optional extension header with an alternate IP address
detected.  The HW checksum offload doesn't handle the alternate
IP address correctly so likely comes up with the wrong answer.
Thus, if the bit is set we ignore the checksum offload value.

Change-ID: I70ff8d38cdcddccf44107691cae13d0c07c284c8
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: allow VF to remove any MAC filter
Mitch Williams [Sat, 21 Dec 2013 05:44:45 +0000 (05:44 +0000)]
i40e: allow VF to remove any MAC filter

If you use ip to change the MAC address of a VF while the VF
driver is loaded, closing the VF interface or unloading the VF
driver will cause the VF driver to remove the MAC filter for its
original (now invalid) MAC address. This would cause the PF
driver to kick an error message to the log, and back to the VF
driver.

Since the VF driver has not really done anything naughty, let's
not punish it. Don't check for MAC address overrides on the
delete operation, just make sure it's a valid address. This keeps
us from spamming the log with confusing errors.

Change-ID: I1f051bd4014e50855457d928c9ee8b0766981b2f
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: do not bail when disabling if Tx queue disable fails
Anjali Singhai Jain [Sat, 21 Dec 2013 05:44:44 +0000 (05:44 +0000)]
i40e: do not bail when disabling if Tx queue disable fails

Fix a bug where the driver was erroneously exiting the driver unload
path if one part of the unload failed.  Instead of the original way
the driver should always continue when disabling and be sure to disable
all queues.

Change-ID: Ib8c81c596bc87c31d8e9ca97ebf871168475279d
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: Setting queue count to 1 using ethtool is valid
Anjali Singhai Jain [Sat, 21 Dec 2013 05:44:43 +0000 (05:44 +0000)]
i40e: Setting queue count to 1 using ethtool is valid

Fix a bug where ethtool set-channels would return failure when configuring
only one Rx queue.

Change-ID: Id833c48c17d71e352b30f3249f6acf9e7aaec57e
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: Cleanup Doxygen warnings
Jeff Kirsher [Sat, 21 Dec 2013 05:44:42 +0000 (05:44 +0000)]
i40e: Cleanup Doxygen warnings

These changes make Doxygen/kdoc work correctly without warnings.

Change-ID: I2941f38860be805ff7548d84dae35754c83f1d62
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
10 years agoi40e: fix long lines
Mitch Williams [Sat, 21 Dec 2013 05:44:41 +0000 (05:44 +0000)]
i40e: fix long lines

Avoid over-length lines in order to appease checkpatch.

Change-ID: I63820a710acf798f49d2f85c610228711af84f72
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: Bump version
Catherine Sullivan [Wed, 18 Dec 2013 13:46:07 +0000 (13:46 +0000)]
i40e: Bump version

Update driver version to 0.3.27-k

Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: Update the Current NVM version Low value
Anjali Singhai Jain [Wed, 18 Dec 2013 13:46:06 +0000 (13:46 +0000)]
i40e: Update the Current NVM version Low value

The current driver will warn the user if the NVM version
is out of date, this raises the bar to a newer version.

Change-ID: I5ec21d8efa4e7c3fdacb56f85d310bb2229b1483
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: drop unused macros
Jesse Brandeburg [Wed, 18 Dec 2013 13:46:05 +0000 (13:46 +0000)]
i40e: drop unused macros

A previous commit removed any need for these macros, so remove
them too.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoi40e: use assignment instead of memcpy
Mitch Williams [Wed, 18 Dec 2013 13:46:04 +0000 (13:46 +0000)]
i40e: use assignment instead of memcpy

These instances were found by coccinelle/spatch, and can
use struct assignment instead of memcpy.

Change-ID: Idc23c3599241bf8a658bda18c80417af3fbfee66
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Fri, 10 Jan 2014 23:37:11 +0000 (06:37 +0700)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:
 "Famouse last words: "final pull request" :-)

  I'm sending this because Jason Wang's fixes are pretty important

   1) Add missing per-cpu stats initialization to ip6_vti.  Otherwise
      lockdep spits out a call trace.  From Li RongQing.

   2) Fix NULL oops in wireless hwsim, from Javier Lopez

   3) TIPC deferred packet queue unlink must NULL out skb->next to avoid
      crashes.  From Erik Hugne

   4) Fix access to uninitialized buffer in nf_nat netfilter code, from
      Daniel Borkmann

   5) Fix lifetime of ipv6 loopback and SIT tunnel addresses, otherwise
      they basically timeout immediately.  From Hannes Frederic Sowa

   6) Fix DMA unmapping of TSO packets in bnx2x driver, from Michal
      Schmidt

   7) Do not allow L2 forwarding offload via macvtap device, the way
      things are now it will not end up being forwaded at all.  From
      Jason Wang

   8) Fix transmit queue selection via ndo_dfwd_start_xmit(), fixing
      things like applying NETIF_F_LLTX to the wrong device (!!) and
      eliding the proper transmit watchdog handling

   9) qlcnic driver was not updating tx statistics at all, from Manish
      Chopra"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  qlcnic: Fix ethtool statistics length calculation
  qlcnic: Fix bug in TX statistics
  net: core: explicitly select a txq before doing l2 forwarding
  macvlan: forbid L2 fowarding offload for macvtap
  bnx2x: fix DMA unmapping of TSO split BDs
  ipv6: add link-local, sit and loopback address with INFINITY_LIFE_TIME
  bnx2x: prevent WARN during driver unload
  tipc: correctly unlink packets from deferred packet queue
  ipv6: pcpu_tstats.syncp should be initialised in ip6_vti.c
  netfilter: only warn once on wrong seqadj usage
  netfilter: nf_nat: fix access to uninitialized buffer in IRC NAT helper
  NFC: Fix target mode p2p link establishment
  iwlwifi: add new devices for 7265 series
  mac80211: move "bufferable MMPDU" check to fix AP mode scan
  mac80211_hwsim: Fix NULL pointer dereference