drm: More links for gamma support helpers

It's not obvious that when using the new color manager stuff you still
need to wire up the legacy helper to get legacy LUT support. Improve
this with more links. drm_crtc_funcs->gamma_set already explains this
properly.

Cc: Peter Rosin <peda@axentia.se>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170620094228.4757-1-daniel.vetter@ffwll.ch

drm: vc4: Use crtc->mode_valid() and encoder->mode_valid() callbacks

Now that we have a callback to check if crtc and encoder supports a
given mode we can use it in vc4 so that we restrict the number of
probed modes to the ones we can actually display.

Also, remove the mode_fixup() calls as these are no longer needed
because mode_valid() will be called before.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: David Airlie <airlied@linux.ie>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Compile-tested and Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/5bea792f91074688c88a2dab8b0a90eec6e98fdf.1495720737.git.joabreu@synopsys.com

drm/doc: Improve ioctl/fops docs a bit more

I spotted a markup issue, plus adding the descriptions in drm_driver.
Plus a few more links while at it.

I'm still mildly unhappy with the split between fops and ioctls, but I
still think having the ioctls in the uapi chapter makes more sense. Oh
well ...

v2: Rebase.

v3: Move misplace hunk to the right patch.

Cc: Stefan Agner <stefan@agner.ch>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170531092045.3950-1-daniel.vetter@ffwll.ch

drm/pci: Deprecate drm_pci_init/exit completely

The magic switching between proper pci driver and shadow-attach isn't
useful anymore since there's no ums+kms drivers left. Let's split this
up properly, calling pci_register_driver for kms drivers and renaming
the shadow-attach init to drm_legacy_pci_init/exit.

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-6-daniel.vetter@ffwll.ch

drm: Remove drm_driver->set_busid hook

The only special-case is pci devices, and we can easily handle this in
the core. Do so and drop a pile of boilerplate from drivers.

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-5-daniel.vetter@ffwll.ch

drm/udl: Remove dummy busid callback

Since

commit ca8e2ad71013049bc88a10b11d83712bfe56cdd4
Author: Thierry Reding <treding@nvidia.com>
Date:   Fri Apr 11 15:23:00 2014 +0200

    drm: Introduce drm_dev_set_unique()

the ->set_busid callback is optional. On top of that the udl one isn't
really fully compliant with the drm uabi, but since only modesetting
ever binds to it (there's no 3d accel on udl) it doesn't matter.

Still, can't harm to aling and use the default used by everyone else.

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-4-daniel.vetter@ffwll.ch

drm/vblank: Consistent drm_crtc_ prefix

We use drm_crtc_ for all the new-style vblank functions which directly
take a struct drm_crtc *. drm_accurate_vblank_count was the odd one
out, correct this to appease my OCD.

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-13-daniel.vetter@ffwll.ch

drm/vblank: _ioctl posfix for ioctl handler

I alwasy get confused about drm_wait_vblank for a split second until I
realize it's the ioctl handler. Unconfuse me, and do it for the legacy
modeset vblank control ioctl too.

While at it also noticed that I misplaced the irq ioctl handler in the
internal header file.

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-12-daniel.vetter@ffwll.ch

drm/doc: vblank cleanup

Unify and review everything, plus make sure it's all correct markup.
Drop the kernel-doc for internal functions. Also rework the overview
section, it's become rather outdated.

Unfortuantely the kernel-doc in drm_driver isn't rendered yet, but
that will change as soon as drm_driver is kernel-docified properly.

Also document properly that drm_vblank_cleanup is optional, the core
calls this already.

v2: Make it clear that cleanup happens in drm_dev_fini for drivers
with their own ->release callback (Thierry).

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-11-daniel.vetter@ffwll.ch

drm/doc: Drop empty include for drm_color_mgmt.h

I'm fed up staring at the error message from kernel-doc that
it can't find anything.

Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-10-daniel.vetter@ffwll.ch

drm/tegra: Drop drm_vblank_cleanup

Again, doesn't seem to serve a purpose.

Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-34-daniel.vetter@ffwll.ch

drm/sti: Drop drm_vblank_cleanup

Seems entirely cargo-culted.

Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-31-daniel.vetter@ffwll.ch

drm/vc4: Mimic drm_atomic_helper_commit() behavior

The VC4 KMS driver is implementing its own ->atomic_commit() but there
are a few generic helpers we can use instead of open-coding the logic.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1496392332-8722-4-git-send-email-boris.brezillon@free-electrons.com

drm/vc4: Add get/set tiling ioctls.

This allows mesa to set the tiling format for a BO and have that
tiling format be respected by mesa on the other side of an
import/export (and by vc4 scanout in the kernel), without defining a
protocol to pass the tiling through userspace.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608001336.12842-2-eric@anholt.net
Acked-by: Dave Airlie <airlied@redhat.com>

drm/vc4: Add T-format scanout support.

The T tiling format is what V3D uses for textures, with no raster
support at all until later revisions of the hardware (and always at a
large 3D performance penalty).  If we can't scan out V3D's format,
then we often need to do a relayout at some stage of the pipeline,
either right before texturing from the scanout buffer (common in X11
without a compositor) or between a tiled screen buffer right before
scanout (an option I've considered in trying to resolve this
inconsistency, but which means needing to use the dirty fb ioctl and
having some update policy).

T-format scanout lets us avoid either of those shadow copies, for a
massive, obvious performance improvement to X11 window dragging
without a compositor.  Unfortunately, enabling a compositor to work
around the discrepancy has turned out to be too costly in memory
consumption for the Raspbian distribution.

Because the HVS operates a scanline at a time, compositing from T does
increase the memory bandwidth cost of scanout.  On my 1920x1080@32bpp
display on a RPi3, we go from about 15% of system memory bandwidth
with linear to about 20% with tiled.  However, for X11 this still ends
up being a huge performance win in active usage.

This patch doesn't yet handle src_x/src_y offsetting within the tiled
buffer.  However, we fail to do so for untiled buffers already.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608001336.12842-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>

drm: Reduce scope of 'state' variable

Smaller scope reduces visibility of variable and makes usage of
uninitialized variable less possible.

Changes in v2:
- separate declaration and initialization
Changes in v3:
- add missing signed-off-by tag

Signed-off-by: Dawid Kurek <dawikur@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170615174556.GA8872@gmail.com

drm: mxsfb_crtc: Reset the eLCDIF controller

According to the eLCDIF initialization steps listed in the MX6SX
Reference Manual the eLCDIF block reset is mandatory.

Without performing the eLCDIF reset the display shows garbage content
when the kernel boots.

In earlier tests this issue has not been observed because the bootloader
was previously showing a splash screen and the bootloader display driver
does properly implement the eLCDIF reset.

Add the eLCDIF reset to the driver, so that it can operate correctly
independently of the bootloader.

Tested on a imx6sx-sdb board.

Cc: <stable@vger.kernel.org>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1494007301-14535-1-git-send-email-fabio.estevam@nxp.com

drm: Remove duplicate forward declaration

Forward declarations in C are great but I'm pretty sure one is enough.

Signed-off-by: Dawid Kurek <dawikur@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170614213518.GA3554@gmail.com

drm/panel: s6e3ha2: Add support for s6e3hf2 panel on TM2e board

This patch supports TM2e panel and the panel has 1600x2560 resolution
in 5.65" physical.

This identify panel type with compatibility string, also invoke
display mode that matches the type. So add the check code for s6e3ha2
compatibility and s6e3hf2 type and select the drm_display_mode of
default and edge type.

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
[treding@nvidia.com: fixup checkpatch warnings]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1492504836-19225-3-git-send-email-hoegeun.kwon@samsung.com

dt-bindings: Add support for samsung s6e3hf2 panel

The samsung s6e3hf2 panel is a 5.65" 1600x2560 AMOLED panel connected
using MIPI-DSI interfaces.

The s6e3hf2 is add to samsung,s6e3ha2.txt binding because it is a
panel similar to the s6e3ha2. So add the compatible string and
comments.

Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1492504836-19225-2-git-send-email-hoegeun.kwon@samsung.com

drm/panel: add backlight dependency for sitronix-st7789v

Without the dependency, we run into a link error:

drivers/gpu/drm/panel/panel-sitronix-st7789v.o: In function `st7789v_probe':
panel-sitronix-st7789v.c:(.text.st7789v_probe+0xc0): undefined reference to `of_find_backlight_by_node'

Fixes: 7142afb3a186 ("drm/panel: Add driver for sitronix ST7789V LCD controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170419180326.303994-1-arnd@arndb.de

drm/panel: S6E3HA2 needs backlight code

The new S6E3HA2 driver fails to link when backlight is disabled:

ERROR: "backlight_device_register" [drivers/gpu/drm/panel/panel-samsung-s6e3ha2.ko] undefined!
ERROR: "backlight_device_unregister" [drivers/gpu/drm/panel/panel-samsung-s6e3ha2.ko] undefined!

This adds a Kconfig dependency like we have it for some other panel drivers.

Fixes: ed29f9426d9b ("drm/panel: Add support for S6E3HA2 panel driver on TM2 board")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170419175939.189098-2-arnd@arndb.de

drm/panel: simple: add support for AUO P320HVN03

This adds support for the AU Optronics Corporation 31.5"
FHD (1920x1080) LVDS TFT LCD panel, which can be supported
by the simple panel driver

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608180758.31020-4-l.stach@pengutronix.de

drm/panel: simple: add support for NLT NL192108AC18-02D

This adds support for the NLT Technologies NL192108AC18-02D
15.6" LVDS FullHD TFT LCD panel, which can be supported
by the simple panel driver.

Timings are taken from the preliminary datasheet, as a final
one is not yet available.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608180758.31020-3-l.stach@pengutronix.de

dt-bindings: add vendor prefix for NLT Technologies, Ltd.

NLT technologies is the former NEC display business, but changed its
name to NLT Technologies when forming a joint venture with
Shenzhen AVIC OPTOELECTRONICS, Ltd.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608180758.31020-2-l.stach@pengutronix.de

drm/panel: simple: add support for NEC NL12880B20-05

This adds support for the NEC LCD Technologies, Ltd. 12.1"
WXGA (1280x800) LVDS TFT LCD panel, which can be supported
by the simple panel driver.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170608180758.31020-1-l.stach@pengutronix.de

drm/panel: add Innolux P079ZCA panel driver

Support Innolux P079ZCA 7.85" 768x1024 TFT LCD panel, it is a MIPI DSI
panel.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490316692-20506-2-git-send-email-zyw@rock-chips.com

dt-bindings: Add INNOLUX P079ZCA panel bindings

The Innolux P079ZCA is a 7.85" panel with a 768X1024 resolution and
connected to DSI using four lanes.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490316692-20506-1-git-send-email-zyw@rock-chips.com

drm/vc4: Fix resource leak in 'vc4_get_hang_state_ioctl()' in error handling path

If one 'drm_gem_handle_create()' fails, we leak somes handles and some
memory.

In order to fix it:
  - move the 'free(bo_state)' at the end of the function so that it is also
    called in the eror handling path. This has the side effect to also try
    to free it if the first 'kcalloc' fails. This is harmless.
  - add a new label, err_delete_handle, in order to delete already
    allocated handles in error handling path
  - remove the now useless 'err' label

The way the code is now written will also delete the handles if the
'copy_to_user()' call fails.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170512123803.1886-1-christophe.jaillet@wanadoo.fr

drm/vc4/vc4_bo.c: always set bo->resv

The bo->resv pointer could be NULL, leading to kernel oopses
like the one below.

This patch ensures that bo->resv is always set in vc4_create_object
ensuring that it is never NULL.

Thanks to Eric Anholt for pointing to the correct solution.

[   19.738487] Unable to handle kernel NULL pointer dereference at virtual address 00000000
[   19.746805] pgd = ffff8000275fc000
[   19.750319] [00000000] *pgd=0000000000000000
[   19.754715] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[   19.760369] Modules linked in: smsc95xx usbnet vc4 drm_kms_helper drm pwm_bcm2835 i2c_bcm2835 bcm2835_rng rng_core bcm2835_dma virt_dma
[   19.772767] CPU: 0 PID: 1297 Comm: Xorg Not tainted 4.12.0-rc1-rpi3 #58
[   19.779476] Hardware name: Raspberry Pi 3 Model B (DT)
[   19.784688] task: ffff800028268000 task.stack: ffff800026c08000
[   19.790705] PC is at ww_mutex_lock_interruptible+0x14/0xc0
[   19.796329] LR is at vc4_submit_cl_ioctl+0x4fc/0x998 [vc4]
...
[   20.240855] [<ffff0000088975f4>] ww_mutex_lock_interruptible+0x14/0xc0
[   20.247528] [<ffff0000009b3ea4>] vc4_submit_cl_ioctl+0x4fc/0x998 [vc4]
[   20.254372] [<ffff0000008f75f8>] drm_ioctl+0x180/0x438 [drm]
[   20.260120] [<ffff00000821383c>] do_vfs_ioctl+0xa4/0x7d0
[   20.265510] [<ffff000008213fe4>] SyS_ioctl+0x7c/0x98
[   20.270550] [<ffff000008082f30>] el0_svc_naked+0x24/0x28
[   20.275941] Code: d2800002 d5384103 910003fd f9800011 (c85ffc04)
[   20.282527] ---[ end trace 1f6bd640ff32ae12 ]---

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/14e68768-6c92-2d74-92fd-196dbc50d8f7@xs4all.nl

drm: Add const to name field declaration in struct drm_prop_enum_list

There is no reason why the name field should not be const, but
several why it should. The struct should only be used by
drm_property_create_enum() and there the name-field from the struct
is passed to drm_property_add_enum(), which takes a const char * as
a parameter.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/5dd3b6a1e20452bd8abdcbc55d1e8d7f56262266.1496161066.git.jsarha@ti.com

drm/pl111: Fix offset calculation for the primary plane.

If src_x/y were nonzero, we failed to shift them down by 16 to get the
pixel offset.  The recent CMA helper function gets it right.

Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: bed41005e617 ("drm/pl111: Initial drm/kms driver for pl111")
Reported-by: Mircea Carausu <mircea.carausu@broadcom.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170603015733.13266-1-eric@anholt.net
Reviewed-by: Sean Paul <seanpaul@chromium.org>

drm/atmel-hlcdc: Fix panel registration

Attach the panel-bridge created by drm_panel_bridge_add() to the
parallel RGB encoder.

Fixes: 96160a8071b2 ("drm/atmel-hlcdc: Replace the panel usage with drm_panel_bridge.")
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1496748866-17165-1-git-send-email-boris.brezillon@free-electrons.com

drm/bridge: Build the panel wrapper in drm_kms_helper

This fixes the following depmod error when building drm as a module:
depmod: ERROR: Found 6 modules in dependency cycles!
depmod: ERROR: Cycle detected: drm -> drm_kms_helper -> drm

Fixes: 13dfc0540a57 ("drm/bridge: Refactor out the panel wrapper from the lvds-encoder bridge.")
Tested-by: Lofstedt, Marta <marta.lofstedt@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/3fd262cf-1db6-4335-320c-af92f9014502@linux.intel.com

drm/atmel-hlcdc: Replace the panel usage with drm_panel_bridge.

This cuts 135 lines of boilerplate, at the cost of losing the
filtering of get_modes() using atmel_hlcdc_dc_mode_valid().  The
atomic check will still check that we don't set an invalid mode,
though.

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511183128.25085-7-eric@anholt.net

drm/atmel-hlcdc: Drop custom encoder cleanup func.

drm_encoder_cleanup() finishes with memsetting it to 0, already.

Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511183128.25085-6-eric@anholt.net

drm/vc4: Switch DPI to using the panel-bridge helper.

Another 100 lines of boilerplate gone, while allowing for bridges to
be connected in the display chain.

Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511183128.25085-3-eric@anholt.net

drm/vc4: Switch DSI to the panel-bridge layer, and support bridges.

The newer version of the RPi panel driver is going to be a combination
of a bridge and a panel, but we should also support panels without a
bridge, so the panel-bridge layer lets us do that cleanly.

v2: Drop "dev" argument.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511183128.25085-2-eric@anholt.net

drm/bridge: Refactor out the panel wrapper from the lvds-encoder bridge.

Many DRM drivers have common code to make a stub connector
implementation that wraps a drm_panel.  By wrapping the panel in a DRM
bridge, all of the connector code (including calls during encoder
enable/disable) goes away.

v2: Fix build with CONFIG_DRM=m, drop "dev" argument that should just
    be the panel's dev, move kerneldoc up a level and document
    _remove().
v3: Fix another breakage with CONFIG_DRM=m, fix breakage with
    CONFIG_OF=n, move protos under CONFIG_DRM_PANEL_BRIDGE, wrap a
    line.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v1)
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> (v2)
Acked-by: Archit Taneja <architt@codeaurora.org> (v2)
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170602202514.11900-1-eric@anholt.net

drm/bridge/synopsys: dw-hdmi: Use bridge->mode_valid() callback

Now that we have a callback to check if bridge supports a given mode
we can use it in Synopsys Designware HDMI bridge so that we restrict
the number of probbed modes to the ones we can actually display.

Also, there is no need to use mode_fixup() callback as mode_valid()
will handle the mode validation.

NOTE: I also had to change the pdata declaration of mode_valid
custom callback so that the passed modes are const. I also changed
in the platforms I found. Not even compiled it though.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Carlo Caione <carlo@caione.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/3d8d449e4d13d2535fa292c75f5fa931de4a4fa8.1495720737.git.joabreu@synopsys.com

drm: zte: use devm_of_platform_populate()

Use devm_of_platform_populate() to be sure that of_platform_depopulate
is called when removing the driver.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
CC: Shawn Guo <shawnguo@kernel.org>
CC: David Airlie <airlied@linux.ie>
CC: dri-devel@lists.freedesktop.org
CC: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1496072763-31209-4-git-send-email-benjamin.gaignard@linaro.org

drm/vc4: Mark the device as active when enabling runtime PM.

Failing to do so meant that we got a resume() callback on first use of
the device, so we would leak the bin BO that we allocated during
probe.

Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 553c942f8b2c ("drm/vc4: Allow using more than 256MB of CMA memory.")
Link: http://patchwork.freedesktop.org/patch/msgid/20170515171615.10168-1-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>

drm: remove writeq/readq function definitions

Instead of rewriting write/readq, use linux/io-64-nonatomic-lo-hi.h which
already have them.

Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170602112510.17544-1-clabbe.montjoie@gmail.com

drm/atmel-hlcdc: Use crtc->mode_valid() callback

Now that we have a callback to check if crtc supports a given mode
we can use it in atmel-hlcdc so that we restrict the number of probbed
modes to the ones we can actually display.

Also, remove the mode_fixup() callback as this is no longer needed
because mode_valid() will be called before.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/95fd6c06c58bd0b957e36a8d7068e6a74b581304.1495720737.git.joabreu@synopsys.com

drm/exynos: Drop drm_vblank_cleanup

Only in the load failure path, where the hardware is quiet anyway.

Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-19-daniel.vetter@ffwll.ch

drm/hdlcd|mali: Drop drm_vblank_cleanup

IRQs are properly shut down, so it almost works as race-free shutdown.
Except the irq is stopped after the vblank stuff, so boom anyway.
Proper way would be to call drm_atomic_helper_shutdown before any of
the kms things gets stopped. So no harm in removing the
drm_vblank_cleanup here really.

Same story for both hdlcd and mali.

v2: Move misplaced malidp hunk to this patch (Liviu).

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-17-daniel.vetter@ffwll.ch

drm/doc: Polish irq helper documentation

Pull a (much shorter) overview into drm_irq.c, and instead put the
callback documentation into in-line comments in drm_drv.h.

v2: Move the include stanzas back to the split-up patch (Stefan).

Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170531092253.12833-1-daniel.vetter@ffwll.ch

drm: Extract drm_vblank.[hc]

drm_irq.c contains both the irq helper library (optional) and the
vblank support (optional, but part of the modeset uapi, and doesn't
require the use of the irq helpers at all.

Split this up for more clarity of the scope of the individual bits.

v2: Move misplaced hunks to this patch (Stefan).

Cc: Stefan Agner <stefan@agner.ch>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170531092146.12528-1-daniel.vetter@ffwll.ch

drm/vc4: Fix comment in vc4_drv.h

Fixes a copy&paste error.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/1495550187-525-1-git-send-email-boris.brezillon@free-electrons.com

drm/pl111: fix warnings without CONFIG_ARM_AMBA

The driver is written in a way to enable compile-testing without CONFIG_ARM_AMBA,
but it just causes needless warnings:

drivers/gpu/drm/pl111/pl111_drv.c:149:26: error: 'pl111_drm_driver' defined but not used [-Werror=unused-variable]
drivers/gpu/drm/pl111/pl111_drv.c:81:12: error: 'pl111_modeset_init' defined but not used [-Werror=unused-function]

This unhides the probe/remove functions again and just leaves the driver
object as unused when CONFIG_ARM_AMBA is disabled, with a __maybe_unused
annotation to shut up the warning.

Fixes: bed41005e617 ("drm/pl111: Initial drm/kms driver for pl111")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524155020.1777369-1-arnd@arndb.de

drm/atomic: Consitfy mode parameter to drm_atomic_set_mode_for_crtc()

drm_atomic_set_mode_for_crtc() doesn't modify the passed mode, so let's
make it const.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170518193837.393-1-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/arcgpu: Drop drm_vblank_cleanup

CRTC don't seem to get shut down in a controlled fashion, but no one
bothers to stop interrupts either so this races no matter what. Might
as well remove it. A call to drm_atomic_helper_shutdown would be
pretty sweet somewhere (and maybe getting rid of the load/unload
callbacks while at it).

Cc: Alexey Brodkin <abrodkin@synopsys.com>
Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-16-daniel.vetter@ffwll.ch
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-14-daniel.vetter@ffwll.ch

drm/atmel: Drop drm_vblank_cleanup

Again almost correct, but since interrupts are shut down after vblank
still a race. Proper cleanup would call drm_atomic_helper_shutdown to
make sure this really is safe.

v2: Remove misplace malidp hunk (Liviu).

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-18-daniel.vetter@ffwll.ch

drm/imx: Drop drm_vblank_cleanup

It's only done in the driver load error path, where vblanks don't need
to be quiescent anyway. And that's all drm_vblank_cleanup does, since
the core will release the vblank allocations on its own already. So
drop it.

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-24-daniel.vetter@ffwll.ch

drm/meson: Drop drm_vblank_cleanup

Again seems just cargo-culted.

Cc: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-26-daniel.vetter@ffwll.ch

drm/stm: Drop drm_vblank_cleanup

Again seems just cargo-culted.

Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Philippe Cornu <philippe.cornu@st.com>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-32-daniel.vetter@ffwll.ch

drm/sun4i: Drop drm_vblank_cleanup

Again seems just cargo-culted ... It's not ordered against any
irq/vblank/modeset shutdown.

Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-33-daniel.vetter@ffwll.ch

drm: better document how to send out the crtc disable event

The kernel doc explained what needs to happen, but not how to most
easily accomplish that using the functions. Fix that.

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-14-daniel.vetter@ffwll.ch

drm: Use vsnprintf extension %ph

Using the extension saves a bit of code.

Miscellanea:

o Neaten and simplify dump_dp_payload_table
o Removed trailing blank space from output

$ size drivers/gpu/drm/drm_dp_mst_topology.o.* drivers/gpu/drm/tinydrm/*.o*
   text    data     bss     dec     hex filename
  25848       0      16   25864    6508 drivers/gpu/drm/drm_dp_mst_topology.o.new
  26091       0      16   26107    65fb drivers/gpu/drm/drm_dp_mst_topology.o.old
   3362       2       0    3364     d24 drivers/gpu/drm/tinydrm/mipi-dbi.o.new
   3376       2       0    3378     d32 drivers/gpu/drm/tinydrm/mipi-dbi.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/a78a21b5f34947da65473a0b7326922cda51a3be.1496187315.git.joe@perches.com

drm/doc: move printf helpers out of drmP.h

And document them lightly. Unfortunately kernel-doc isn't the most
awesome for documenting #defines that don't look like functions, it
makes functions out of them :-/

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-2-daniel.vetter@ffwll.ch
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-3-daniel.vetter@ffwll.ch

drm/pl111: select DRM_PANEL

When DRM_PANEL is disabled, we get a link error for pl111:

drivers/gpu/built-in.o: In function `pl111_connector_destroy':
pl111_connector.c:(.text+0x3487e6): undefined reference to `drm_panel_detach'

For some reason this only appears in the latest linux-next
although the driver appears to have used the symbol for a few
weeks already. The solution however is simple enough, we just
need to add a 'select' statement.

Fixes: bed41005e617 ("drm/pl111: Initial drm/kms driver for pl111")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170530092224.1204037-1-arnd@arndb.de

drm/bridge: analogix-anx78xx: Use bridge->mode_valid() callback

Now that we have a callback to check if bridge supports a given mode
we can use it in Analogix bridge so that we restrict the number of
probbed modes to the ones we can actually display.

Also, there is no need to use mode_fixup() callback as mode_valid()
will handle the mode validation.

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1d0ed1858ae56c827bd09cc1fa6ff4a05d1530eb.1495720737.git.joabreu@synopsys.com

drm: Use mode_valid() in atomic modeset

This patches makes use of the new mode_valid() callbacks introduced
previously to validate the full video pipeline when modesetting.

This calls the connector->mode_valid(), encoder->mode_valid(),
bridge->mode_valid() and crtc->mode_valid() so that we can
make sure that the mode will be accepted in every components.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Changes v1->v2:
- Removed call to connector->mode_valid (Ville, Daniel)
- Changed function name (Ville)
- Use for_each_new_connector_in_state (Ville)
- Do not validate if connector and mode didn't change (Ville)
- Use new helpers to call mode_valid

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/a457d6a69ad07b3936304653c919068c430c0857.1495720737.git.joabreu@synopsys.com

drm: Use new mode_valid() helpers in connector probe helper

This changes the connector probe helper function to use the new
encoder->mode_valid(), bridge->mode_valid() and crtc->mode_valid()
helper callbacks to validate the modes.

The new callbacks are optional so the behaviour remains the same
if they are not implemented. If they are, then the code loops
through all the connector's encodersXbridgesXcrtcs and calls the
callback.

If at least a valid encoderXbridgeXcrtc combination is found which
accepts the mode then the function returns MODE_OK.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Changes v3->v4:
- Change function name (Laurent)
Changes v2->v3:
- Call also bridge->mode_valid (Daniel)
Changes v1->v2:
- Use new helpers suggested by Ville
- Change documentation (Daniel)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/d4e3ba87d822fa92f1b8773e441b9a02af3bde71.1495720737.git.joabreu@synopsys.com

drm: Introduce drm_bridge_mode_valid()

Introduce a new helper function which calls mode_valid() callback
for all bridges in an encoder chain.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/36bd5e054496ad3c9c71f1ffe204f28533f55f1e.1495720737.git.joabreu@synopsys.com

drm: Add drm_{crtc/encoder/connector}_mode_valid()

Add a new helper to call crtc->mode_valid, connector->mode_valid
and encoder->mode_valid callbacks.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Dave Airlie <airlied@linux.ie>
Changes v2->v3:
- Move helpers to drm_probe_helper.c (Daniel)
- Squeeze patches that introduce helpers into a single
one (Daniel)

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
[danvet: Make it compile when CONFIG_DRM_DP_AUX_CHARDEV is selected.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/b55c8bd029da219ff04e39086025c115731a49b1.1495720737.git.joabreu@synopsys.com

drm: Remove drm_device->virtdev

This is a leftover from the drm_bus days, where we've had a
bus-specific device type for every bus type in drm_device. Except for
pci (which we can't remove because dri1 drivers) this is all gone. And
the virt driver also doesn't really need it, dev_to_virtio works
perfectly fine.

Cc: David Airlie <airlied@linux.ie>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524145212.27837-3-daniel.vetter@ffwll.ch

drm: todo: remove task about switch to drm_connector_list_iter

This is now completed.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511191049.28944-9-gustavo@padovan.org

drm: remove unsafe drm_for_each_connector()

After converting all users to drm_for_each_connector_iter() we no
longer need drm_for_each_connector() so we can go ahead and remove it.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511191049.28944-8-gustavo@padovan.org

drm/vc4: use drm_for_each_connector_iter()

Drop legacy drm_for_each_connector() in favor of the race-free
drm_for_each_connector_iter().

v2: add missing drm_connector_list_iter_end(Daniel Vetter)

Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170512164100.7649-1-gustavo@padovan.org

drm/nouveau: use drm_for_each_connector_iter()

Drop legacy drm_for_each_connector() in favor of the race-free
drm_for_each_connector_iter().

Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511191049.28944-6-gustavo@padovan.org

drm/mediatek: use drm_for_each_connector_iter()

Drop legacy drm_for_each_connector() in favor of the race-free
drm_for_each_connector_iter().

Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511191049.28944-5-gustavo@padovan.org

drm/i915: use drm_for_each_connector_iter()

Drop legacy drm_for_each_connector() in favor of the race-free
drm_for_each_connector_iter().

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511191049.28944-4-gustavo@padovan.org

drm/rockchip: use drm_for_each_connector_iter()

Drop legacy drm_for_each_connector() in favor of the race-free
drm_for_each_connector_iter()

Cc: Mark Yao <mark.yao@rock-chips.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170515134330.3275-1-gustavo@padovan.org

drm/exynos: use drm_for_each_connector_iter()

Drop legacy drm_for_each_connector() in favor of the race-free
drm_for_each_connector_iter()

Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170511191049.28944-2-gustavo@padovan.org

dma-buf/sync-file: Defer creation of sync_file->name

Constructing the name takes the majority of the time for allocating a
sync_file to wrap a fence, and the name is very rarely used (only via
the sync_file status user interface). To reduce the impact on the common
path (that of creating sync_file to pass around), defer the construction
of the name until it is first used.

v2: Update kerneldoc (kbuild test robot)
v3: sync_debug.c was peeking at the name
v4: Comment upon the potential race between two users of
sync_file_get_name() and claim that such a race is below the level of
notice. However, to prevent any future nuisance, use a global spinlock
to serialize the assignment of the name.
v5: Completely avoid the read/write race by only storing the name passed
in from the user inside sync_file->user_name and passing in a buffer to
dynamically construct the name otherwise.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170516111042.24719-1-chris@chris-wilson.co.uk

sync_file.txt: standardize document format

Each text file under Documentation follows a different
format. Some doesn't even have titles!

Change its representation to follow the adopted standard,
using ReST markups for it to be parseable by Sphinx:
- Use markup for document title and authorship;
- Mark literal blocks;
- Use a numbered list for references.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/e781f61e582e7c7eb5de456608043aff9fe2b2b5.1495157082.git.mchehab@s-opensource.com

gpu: drm: gma500: remove two more dead variable

The dead code removal left two unused variables:

drivers/gpu/drm/gma500/mdfld_tpo_vid.c: In function 'tpo_vid_get_config_mode':
drivers/gpu/drm/gma500/mdfld_tpo_vid.c:34:31: error: unused variable 'ti' [-Werror=unused-variable]

This removes them as well.

Fixes: 94d7fb4982d2 ("gpu: drm: gma500: remove dead code")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170522203031.2912874-1-arnd@arndb.de

drm/doc: Clarify mode_fixup vs. atomic_check a bit more

Brought up by both Laurent and Andrzej when reviewing the new
->mode_valid hooks. Since mode_fixup is just a simpler version of the
much more generic atomic_check we can't really unify it with
mode_valid. Most drivers should probably switch their current
mode_fixup code to either the new mode_valid or the atomic_check
hooks, but e.g. that doesn't exist yet for bridges, and for CRTCs the
situation is a bit more complicated. Hence there's no clear
equivalence between mode_fixup and mode_valid, even if it looks like
that at first glance.

v2: Fix accidental double-dot (Adnrzej).

Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170515091136.26307-2-daniel.vetter@ffwll.ch

drm/doc: Document adjusted/request modes a bit better

Laurent started a massive discussion on IRC about this. Let's try to
document common usage a bit better.

v2: Cross-links+typos.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170515091136.26307-1-daniel.vetter@ffwll.ch

drm: Add crtc/encoder/bridge->mode_valid() callbacks

This adds a new callback to crtc, encoder and bridge helper functions
called mode_valid(). This callback shall be implemented if the
corresponding component has some sort of restriction in the modes
that can be displayed. A NULL callback implicates that the component
can display all the modes.

We also change the documentation so that the new and old callbacks
are correctly documented.

Only the callbacks were implemented to simplify review process,
following patches will make use of them.

Changes in v2 from Daniel:
- Update the warning about how modes aren't filtered in atomic_check -
  the heleprs help out a lot more now.
- Consistenly roll out that warning, crtc/encoder's atomic_check
  missed it.
- Sprinkle more links all over the place, so it's easier to see where
  this stuff is used and how the differen hooks are related.
- Note that ->mode_valid is optional everywhere.
- Explain why the connector's mode_valid is special and does _not_ get
  called in atomic_check.

v3: Document what can and cannot be checked in mode_valid a bit better
(Andrjez). Answer: Only allowed to look at the mode, nothing else.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Jose Abreu <joabreu@synopsys.com>
Cc: Carlos Palminha <palminha@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2)
Reviewed-by: Jose Abreu <joabreu@synopsys.com> (v2)
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170515093347.31098-1-daniel.vetter@ffwll.ch

MAINTAINERS: update drm/stm maintainers list

Add Benjamin Gaignard and Vincent Abriou as STM maintainers:
Benjamin Gaignard <benjamin.gaignard@linaro.org>
Vincent Abriou <vincent.abriou@st.com>

Signed-off-by: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1495544446-22360-1-git-send-email-vincent.abriou@st.com

drm/stm: ltdc: fix duplicated arguments

Fix COMPILE_TEST build issue detected with the
rule: "duplicated argument to & or |"

Signed-off-by: Philippe CORNU <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1495445421-20846-1-git-send-email-philippe.cornu@st.com

drm/pl111: Fix return value check in pl111_amba_probe()

In case of error, the function devm_ioremap_resource() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().

Fixes: bed41005e617 ("drm/pl111: Initial drm/kms driver for pl111")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170521010152.6186-1-weiyj.lk@gmail.com

drm/amd: include <linux/delay.h> instead of "linux/delay.h"

Use <...> notation to include headers located in include/linux.
While we are here, tweak the includes order a bit to sort them
alphabetically.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1495082612-10385-1-git-send-email-yamada.masahiro@socionext.com

drm: Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ to UAPI

Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ defines to the UAPI
as a convenience.

Ideally the DRM_ROTATE_ and DRM_REFLECT_ property ids are looked up
through the atomic API, but realizing that userspace is likely to take
shortcuts and assume that the enum values are what is sent over the
wire.

As a result these defines are provided purely as a convenience to
userspace applications.

Changes since v3:
 - Switched away from past tense in comments
 - Add define name change to previously mis-spelled DRM_REFLECT_X comment
 - Improved the comment for the DRM_MODE_REFLECT_<axis> comment

Changes since v2:
 - Changed define prefix from DRM_MODE_PROP_ to DRM_MODE_
 - Fix compilation errors
 - Changed comment formatting
 - Deduplicated comment lines
 - Clarified DRM_MODE_PROP_REFLECT_ comment

Changes since v1:
 - Moved defines from drm.h to drm_mode.h
 - Changed define prefix from DRM_ to DRM_MODE_PROP_
 - Updated uses of the defines to the new prefix
 - Removed include from drm_rect.c
 - Stopped using the BIT() macro

Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170519205017.23307-2-robert.foss@collabora.com

drm/vgem: Fix return value check in vgem_init()

In case of error, the function platform_device_register_simple() returns
ERR_PTR() and never returns NULL. The NULL test in the return value
check should be replaced with IS_ERR().

Fixes: af33a9190d02 ("drm/vgem: Enable dmabuf import interfaces")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Fix fixes: tag per Chris' review.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170521011939.8111-1-weiyj.lk@gmail.com

drm/blend: Fix comment typ-o

Fix DRM_REFELCT_Y -> DRM_REFLECT_Y.

Signed-off-by: Robert Foss <robert.foss@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170519205017.23307-1-robert.foss@collabora.com

drm/stm: remove unneeded -Iinclude/drm compiler flag

With the include directives under include/drm/ fixed, this flag is
no longer needed.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1495081793-9707-13-git-send-email-yamada.masahiro@socionext.com

drm/vc4: fix include notation and remove -Iinclude/drm flag

Include <drm/*.h> instead of relative path from include/drm, then
remove the -Iinclude/drm compiler flag.

While we are here, use <...> instead of "..." for include/linux/*.h
and include/sound/*.h headers too.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1495081793-9707-2-git-send-email-yamada.masahiro@socionext.com

drm/pl111: Add a debugfs node to dump our registers.

While debugging an X11 display failure, I wanted to see where we were
actually scanning out from.  This is probably generally useful to
others that might be working on this device.

v2: Fix uint32_t sparse warning.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170518005640.10310-1-eric@anholt.net
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v1)

drm/pl111: make structure mode_config_funcs static

structure mode_config_funcs can be made static as it does not need to be
in global scope.  Fixes sparse warning:

warning: symbol 'mode_config_funcs' was not declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170519111018.19641-1-colin.king@canonical.com

drm/pl111: make structure pl111_display_funcs static

structure pl111_display_funcs can be made static as it does not need to be
in global scope.  Fixes sparse warning:

"warning: symbol 'pl111_display_funcs' was not declared. Should it
be static?"

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170519110203.19417-1-colin.king@canonical.com

drm/pl111: Register the clock divider and use it.

This is required for the panel to work on bcm911360, where CLCDCLK is
the fixed 200Mhz AXI41 clock.  The rate set is still passed up to the
CLCDCLK, for platforms that have a settable rate on that one.

v2: Set SET_RATE_PARENT (caught by Linus Walleij), depend on
    COMMON_CLK.
v3: Mark the clk_ops static (caught by Stephen).

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170508193348.30236-1-eric@anholt.net
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

drm: drop drm_[cm]alloc* helpers

Now that drm_[cm]alloc* helpers are simple one line wrappers around
kvmalloc_array and drm_free_large is just kvfree alias we can drop
them and replace by their native forms.

This shouldn't introduce any functional change.

Changes since v1
- fix typo in drivers/gpu//drm/etnaviv/etnaviv_gem.c - noticed by 0day
  build robot

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Michal Hocko <mhocko@suse.com>drm: drop drm_[cm]alloc* helpers
[danvet: Fixup vgem which grew another user very recently.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517122312.GK18247@dhcp22.suse.cz

drm: replace drm_[cm]alloc* by kvmalloc alternatives

drm_[cm]alloc* has grown their own kvmalloc with vmalloc fallback
implementations. MM has grown kvmalloc* helpers in the meantime. Let's
use those because it a) reduces the code and b) MM has a better idea
how to implement fallbacks (e.g. do not vmalloc before kmalloc is tried
with __GFP_NORETRY).

drm_calloc_large needs to get __GFP_ZERO explicitly but it is the same
thing as kvmalloc_array in principle.

Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170517065509.18659-1-mhocko@kernel.org

gpu: host1x: select IOMMU_IOVA

When IOMMU_IOVA is not built-in but host1x is, we get a link error:

drivers/gpu/host1x/dev.o: In function `host1x_remove':
dev.c:(.text.host1x_remove+0x50): undefined reference to `put_iova_domain'
drivers/gpu/host1x/dev.o: In function `host1x_probe':
dev.c:(.text.host1x_probe+0x31c): undefined reference to `init_iova_domain'
dev.c:(.text.host1x_probe+0x38c): undefined reference to `put_iova_domain'
drivers/gpu/host1x/cdma.o: In function `host1x_cdma_init':
cdma.c:(.text.host1x_cdma_init+0x238): undefined reference to `alloc_iova'
cdma.c:(.text.host1x_cdma_init+0x2c0): undefined reference to `__free_iova'
drivers/gpu/host1x/cdma.o: In function `host1x_cdma_deinit':
cdma.c:(.text.host1x_cdma_deinit+0xb0): undefined reference to `free_iova'

This adds the same select statement that we have for drm_tegra.

Fixes: 404bfb78daf3 ("gpu: host1x: Add IOMMU support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170419182449.885312-1-arnd@arndb.de

Merge remote-tracking branch 'airlied/drm-next' into drm-misc-next

Picking up drm-next @ 4.12-rc1 in order to apply Michal Hocko's vmalloc patch set

Signed-off-by: Sean Paul <seanpaul@chromium.org>

drm/sti:fix spelling mistake: "compoment" -> "component"

Trivial fix to spelling mistake in DRM_ERROR message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170513224150.19955-1-colin.king@canonical.com

drm: trivial documentation fix to drm_for_each_connector_iter

While reading drm_for_each_connector_iter, I noticed a mention to
drm_connector_begin which doesn't exist. It should be
drm_connector_get.

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170421003819.17685-1-krisman@collabora.co.uk