GitHub/MotorolaMobilityLLC/kernel-slsi.git
15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Fri, 24 Apr 2009 15:36:06 +0000 (08:36 -0700)]
Merge git://git./linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: pwc : do not pass stack allocated buffers to USB core.
  USB: otg: Fix bug on remove path without transceiver
  USB: correct error handling in cdc-wdm
  USB: removal of tty->low_latency hack dating back to the old serial code
  USB: serial: sierra driver bug fix for composite interface
  USB: gadget: omap_udc uses platform_driver_probe()
  USB: ci13xxx_udc: fix build error
  USB: musb: Prevent multiple includes of musb.h
  USB: pass mem_flags to dma_alloc_coherent
  USB: g_file_storage: fix use-after-free bug when closing files
  USB: ehci-sched.c: EHCI SITD scheduling bugfix
  USB: fix mos7840 problem with minor numbers
  USB: mos7840: add new device id
  USB: musb: fix build when !CONFIG_PM
  USB: musb: Remove my email address from few musb related drivers
  USB: Gadget: MIPS CI13xxx UDC bugfixes
  USB: Unusual Device support for Gold MP3 Player Energy
  USB: serial: fix lifetime and locking problems

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs...
Linus Torvalds [Fri, 24 Apr 2009 15:32:44 +0000 (08:32 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ecryptfs/ecryptfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
  eCryptfs: Larger buffer for encrypted symlink targets
  eCryptfs: Lock lower directory inode mutex during lookup
  eCryptfs: Remove ecryptfs_unlink_sigs warnings
  eCryptfs: Fix data corruption when using ecryptfs_passthrough
  eCryptfs: Print FNEK sig properly in /proc/mounts
  eCryptfs: NULL pointer dereference in ecryptfs_send_miscdev()
  eCryptfs: Copy lower inode attrs before dentry instantiation

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux...
Linus Torvalds [Fri, 24 Apr 2009 15:32:23 +0000 (08:32 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/geert/linux-m68k

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Update defconfigs for 2.6.30-rc3
  m68k,m68knommu: Wire up preadv and pwritev
  scsi: a4000 - Correct driver unregistration in case of failure

15 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Fri, 24 Apr 2009 15:28:27 +0000 (08:28 -0700)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] update default configuration.
  [S390] omit frame pointers on s390 when possible
  [S390] Use tape_generic_offline directly.
  [S390] /proc/stat idle field for idle cpus
  [S390] appldata: avoid deadlock with appldata_mem
  [S390] ipl: fix compile breakage

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes
Linus Torvalds [Fri, 24 Apr 2009 15:27:02 +0000 (08:27 -0700)]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: Ensure that the inode goal block settings are updated
  GFS2: Fix bug in block allocation
  bitops: Add __ffs64 bitop

15 years agoMerge branch 'kvm-updates/2.6.30' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Fri, 24 Apr 2009 15:26:01 +0000 (08:26 -0700)]
Merge branch 'kvm-updates/2.6.30' of git://git./virt/kvm/kvm

* 'kvm-updates/2.6.30' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Unregister cpufreq notifier on unload
  KVM: x86: release time_page on vcpu destruction
  KVM: Fix overlapping check for memory slots
  KVM: MMU: disable global page optimization
  KVM: ia64: fix locking order entering guest
  KVM: MMU: Fix off-by-one calculating large page count

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Fri, 24 Apr 2009 15:16:05 +0000 (08:16 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/bart/ide-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  MAINTAINERS: update IDE entry
  palm_bk3710: palm_bk3710_udmatimings[] CodingStyle fixup
  palm_bk3710: those registers/bitfields don't exist
  mediabay: fix build for CONFIG_BLOCK=n
  ide: Stop disks on reboot for laptop which cuts power
  ide-cd: fix kernel crash on hppa regression
  palm_bk3710: UDMA performance fix

15 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Fri, 24 Apr 2009 15:15:25 +0000 (08:15 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Add quirk for Packard Bell RS65
  [ALSA] intel8x0: another attempt to fix ac97_clock measure routine
  [ALSA] ac97_codec: increase timeout for analog subsections
  ALSA: hda - Add quirks for Realtek codecs
  ALSA: hda - Fix alc662_init_verbs
  ALSA: keywest: Convert to new-style i2c driver
  ALSA: AOA: Convert onyx and tas codecs to new-style i2c drivers
  ALSA: Atiixp: Add SSID for mute_led quirk (unknown HP model)
  ALSA: us122l: add snd_us122l_free()
  ASoC: Fix warning in wm9705
  ASoC: OMAP: Update contact addresses
  ASoC: pxa-ssp: Don't use SSCR0_SerClkDiv and SSCR0_SCR
  ALSA: us122l: Fix signedness in comparisions

15 years agoradio_si470x: Fix free memory corruption
Alan Cox [Wed, 22 Apr 2009 14:03:15 +0000 (15:03 +0100)]
radio_si470x: Fix free memory corruption

The release path for a disconnected device frees the object then unlocks
the mutex in the freed object...

Found by Dan Carpenter using Smatch

Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoserial: remove contact data
Niels de Vos [Wed, 22 Apr 2009 14:02:44 +0000 (15:02 +0100)]
serial: remove contact data

Remove my name and emailaddress from note in the source. Wincor Nixdorf
only has some ITE-chips on their mainboards, other chips are not
available for me for testing.

Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agocafe_nand: Fix warning
Alan Cox [Wed, 22 Apr 2009 14:02:23 +0000 (15:02 +0100)]
cafe_nand: Fix warning

Wrong types on IRQ handler

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Fri, 24 Apr 2009 14:48:24 +0000 (07:48 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cfq-iosched: cache prio_tree root in cfqq->p_root
  cfq-iosched: fix bug with aliased request and cooperation detection
  cfq-iosched: clear ->prio_trees[] on cfqd alloc
  block: fix intermittent dm timeout based oops
  umem: fix request_queue lock warning
  block: simplify I/O stat accounting
  pktcdvd.h should include mempool.h
  cfq-iosched: use the default seek distance when there aren't enough seek samples
  cfq-iosched: make seek_mean converge more quickly
  block: make blk_abort_queue() ignore non-request based devices
  block: include empty disks in /proc/diskstats
  bio: use bio_kmalloc() in copy/map functions
  bio: fix bio_kmalloc()
  block: fix queue bounce limit setting
  block: fix SG_IO vector request data length handling
  scatterlist: make sure sg_miter_next() doesn't return 0 sized mappings

15 years agoMN10300: Update the ASB2303 defconfig
David Howells [Wed, 22 Apr 2009 11:10:07 +0000 (12:10 +0100)]
MN10300: Update the ASB2303 defconfig

Update the defconfig for the ASB2303 evaluation board.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoDelete slow-work timers properly
Jonathan Corbet [Wed, 22 Apr 2009 11:01:49 +0000 (12:01 +0100)]
Delete slow-work timers properly

Slow-work appears to delete its timer as soon as the first user
unregisters, even though other users could be active.  At the same time, it
never seems to delete slow_work_oom_timer.  Arrange for both to happen in
the shutdown path.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Fri, 24 Apr 2009 14:46:51 +0000 (07:46 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (94 commits)
  netfilter: ctnetlink: fix gcc warning during compilation
  net/netrom: Fix socket locking
  netlabel: Always remove the correct address selector
  ucc_geth.c: Fix upsmr setting in RMII mode
  8139too: fix HW initial flow
  af_iucv: Fix race when queuing incoming iucv messages
  af_iucv: Test additional sk states in iucv_sock_shutdown
  af_iucv: Reject incoming msgs if RECV_SHUTDOWN is set
  af_iucv: fix oops in iucv_sock_recvmsg() for MSG_PEEK flag
  af_iucv: consider state IUCV_CLOSING when closing a socket
  iwlwifi: DMA fixes
  iwlwifi: add debugging for TX path
  mwl8: fix build warning.
  mac80211: fix alignment calculation bug
  mac80211: do not print WARN if config interface
  iwl3945: use cancel_delayed_work_sync to cancel rfkill_poll
  iwlwifi: fix EEPROM validation mask to include OTP only devices
  atmel: fix netdev ops conversion
  pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM
  mlx4_en: Fix cleanup if workqueue create in mlx4_en_add() fails
  ...

15 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Fri, 24 Apr 2009 14:45:52 +0000 (07:45 -0700)]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Fix bus type probing for ESP and LE devices.
  sparc32: Update defconfig.
  sparc64: Update defconfig.

15 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Fri, 24 Apr 2009 14:44:58 +0000 (07:44 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  powerpc: Fix modular build of ide-pmac when mediabay is built in
  powerpc/pasemi: Fix build error on UP
  powerpc: Make macintosh/mediabay driver depend on CONFIG_BLOCK
  maintainers: Fix PS3 patterns
  powerpc/ps3: Fix CONFIG_PS3_FLASH=n build warning
  powerpc/32: Don't clobber personality flags on exec
  powerpc: Fix crash on CPU hotplug
  powerpc/85xx: Remove defconfigs that mpc85xx_{smp_}defconfig cover
  powerpc/85xx: Added SMP defconfig
  powerpc/85xx: Enabled a bunch of FSL specific drivers/options
  powerpc/85xx: Updated generic mpc85xx_defconfig
  powerpc: don't disable SATA interrupts on Freescale MPC8610 HPCD
  fsl_rio: Pass the proper device to dma mapping routines
  powerpc: Fix of_node_put() exit path in of_irq_map_one()
  powerpc/5200: defconfig updates
  powerpc/5200: Add FLASH nodes to lite5200 device tree
  powerpc/device-tree: Document MTD nodes with multiple "reg" tuples
  powerpc/of-device-tree: Factor MTD physmap bindings out of booting-without-of
  powerpc/5200: Bring the legacy fsl_spi_platform_data hooks back

15 years agocheck_unsafe_exec: s/lock_task_sighand/rcu_read_lock/
Oleg Nesterov [Thu, 23 Apr 2009 23:02:45 +0000 (01:02 +0200)]
check_unsafe_exec: s/lock_task_sighand/rcu_read_lock/

write_lock(&current->fs->lock) guarantees we can't wrongly miss
LSM_UNSAFE_SHARE, this is what we care about. Use rcu_read_lock()
instead of ->siglock to iterate over the sub-threads. We must see
all CLONE_THREAD|CLONE_FS threads which didn't pass exit_fs(), it
takes fs->lock too.

With or without this patch we can miss the freshly cloned thread
and set LSM_UNSAFE_SHARE, we don't care.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
[ Fixed lock/unlock typo  - Hugh ]
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agodo_execve() must not clear fs->in_exec if it was set by another thread
Oleg Nesterov [Thu, 23 Apr 2009 23:01:56 +0000 (01:01 +0200)]
do_execve() must not clear fs->in_exec if it was set by another thread

If do_execve() fails after check_unsafe_exec(), it clears fs->in_exec
unconditionally. This is wrong if we race with our sub-thread which
also does do_execve:

Two threads T1 and T2 and another process P, all share the same
->fs.

T1 starts do_execve(BAD_FILE). It calls check_unsafe_exec(), since
->fs is shared, we set LSM_UNSAFE but not ->in_exec.

P exits and decrements fs->users.

T2 starts do_execve(), calls check_unsafe_exec(), now ->fs is not
shared, we set fs->in_exec.

T1 continues, open_exec(BAD_FILE) fails, we clear ->in_exec and
return to the user-space.

T1 does clone(CLONE_FS /* without CLONE_THREAD */).

T2 continues without LSM_UNSAFE_SHARE while ->fs is shared with
another process.

Change check_unsafe_exec() to return res = 1 if we set ->in_exec, and change
do_execve() to clear ->in_exec depending on res.

When do_execve() suceeds, it is safe to clear ->in_exec unconditionally.
It can be set only if we don't share ->fs with another process, and since
we already killed all sub-threads either ->in_exec == 0 or we are the
only user of this ->fs.

Also, we do not need fs->lock to clear fs->in_exec.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
15 years agocfq-iosched: cache prio_tree root in cfqq->p_root
Jens Axboe [Thu, 23 Apr 2009 10:19:38 +0000 (12:19 +0200)]
cfq-iosched: cache prio_tree root in cfqq->p_root

Currently we look it up from ->ioprio, but ->ioprio can change if
either the process gets its IO priority changed explicitly, or if
cfq decides to temporarily boost it. So if we are unlucky, we can
end up attempting to remove a node from a different rbtree root than
where it was added.

Fix this by using ->org_ioprio as the prio_tree index, since that
will only change for explicit IO priority settings (not for a boost).
Additionally cache the rbtree root inside the cfqq, then we don't have
to add code to reinsert the cfqq in the prio_tree if IO priority changes.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agocfq-iosched: fix bug with aliased request and cooperation detection
Jens Axboe [Thu, 23 Apr 2009 10:14:56 +0000 (12:14 +0200)]
cfq-iosched: fix bug with aliased request and cooperation detection

cfq_prio_tree_lookup() should return the direct match, yet it always
returns zero. Fix that.

cfq_prio_tree_add() assumes that we don't get a direct match, while
it is very possible that we do. Using O_DIRECT, you can have different
cfqq with matching requests, since you don't have the page cache
to serialize things for you. Fix this bug by only adding the cfqq if
there isn't an existing match.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agocfq-iosched: clear ->prio_trees[] on cfqd alloc
Jens Axboe [Thu, 23 Apr 2009 10:13:27 +0000 (12:13 +0200)]
cfq-iosched: clear ->prio_trees[] on cfqd alloc

Not strictly needed, but we should make it clear that we init the
rbtree roots here.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agoblock: fix intermittent dm timeout based oops
Hannes Reinecke [Thu, 23 Apr 2009 08:32:59 +0000 (10:32 +0200)]
block: fix intermittent dm timeout based oops

Very rarely under stress testing of dm, oopses are occuring as
something tampers with an old stack frame.  This has been traced back
to blk_abort_queue() leaving a timeout_list pointing to the stack.
The reason is that sometimes blk_abort_request() won't delete the
timer (if the request is marked as complete but before the timer has
been removed, a small race window).  Fix this by splicing back from
the ususally empty list to the q->timeout_list.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agoumem: fix request_queue lock warning
Sage Weil [Thu, 23 Apr 2009 06:37:58 +0000 (08:37 +0200)]
umem: fix request_queue lock warning

The umem driver issues two warnings on boot, due to blk_plug_device() and
blk_remove_plug() being called without q->queue_lock held.  Starting with
e48ec690 (block: extend queue_flag bitops), the queue_flag_* functions
warn if q->queue_lock doesn't appear to be locked.  In fact, q->queue_lock
is NULL (though that apparently isn't otherwise a problem as the driver is
using card->lock for everything).

Although blk_init_queue() with take a request_fn_proc and spinlock_t*,
there isn't a corresponding init helper that takes a make_request_fn.
Setting queue_lock to &card->lock explicitly seems to work fine for me.
The warning goes away and the device appears to behave.

[    1.531881] v2.3 : Micro Memory(tm) PCI memory board block driver
[    1.538136] umem 0000:02:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.545018] umem 0000:02:01.0: Micro Memory(tm) controller found (PCI Mem Module (Battery Backup))
[    1.554176] umem 0000:02:01.0: CSR 0xfc9ffc00 -> 0xffffc200013d0c00 (0x100)
[    1.561279] umem 0000:02:01.0: Size 1048576 KB, Battery 1 Disabled (FAILURE), Battery 2 Disabled (FAILURE)
[    1.571114] umem 0000:02:01.0: Window size 16777216 bytes, IRQ 20
[    1.577304] umem 0000:02:01.0: memory NOT initialized. Consider over-writing whole device.
[    1.585989]  umema:<4>------------[ cut here ]------------
[    1.591775] WARNING: at include/linux/blkdev.h:492 blk_plug_device+0x6d/0x106()
[    1.592025] Hardware name: H8SSL
[    1.592025] Modules linked in:
[    1.592025] Pid: 1, comm: swapper Not tainted 2.6.29 #8
[    1.592025] Call Trace:
[    1.592025]  [<ffffffff8023c994>] warn_slowpath+0xd3/0xf2
[    1.592025]  [<ffffffff8025a5b5>] ? save_trace+0x3f/0x9b
[    1.592025]  [<ffffffff8025a68b>] ? add_lock_to_list+0x7a/0xba
[    1.592025]  [<ffffffff8025e609>] ? validate_chain+0xb3b/0xce8
[    1.592025]  [<ffffffff80441556>] ? mm_make_request+0x27/0x59
[    1.592025]  [<ffffffff80441556>] ? mm_make_request+0x27/0x59
[    1.592025]  [<ffffffff8025ef04>] ? __lock_acquire+0x74e/0x7b9
[    1.592025]  [<ffffffff8025a70e>] ? get_lock_stats+0x34/0x5e
[    1.592025]  [<ffffffff8025a746>] ? put_lock_stats+0xe/0x27
[    1.592025]  [<ffffffff80441556>] ? mm_make_request+0x27/0x59
[    1.592025]  [<ffffffff803ad165>] blk_plug_device+0x6d/0x106
[    1.592025]  [<ffffffff80441575>] mm_make_request+0x46/0x59
[    1.592025]  [<ffffffff803ac2d9>] generic_make_request+0x335/0x3cf
[    1.592025]  [<ffffffff8027fcc7>] ? mempool_alloc_slab+0x11/0x13
[    1.592025]  [<ffffffff8027fdce>] ? mempool_alloc+0x45/0x101
[    1.592025]  [<ffffffff8025a746>] ? put_lock_stats+0xe/0x27
[    1.592025]  [<ffffffff803adda5>] submit_bio+0x10a/0x119
[    1.592025]  [<ffffffff802c8d00>] submit_bh+0xe5/0x109
[    1.592025]  [<ffffffff802cbf43>] block_read_full_page+0x2aa/0x2cb
[    1.592025]  [<ffffffff802cf4c4>] ? blkdev_get_block+0x0/0x4c
[    1.592025]  [<ffffffff805c90a8>] ? _spin_unlock_irq+0x36/0x51
[    1.592025]  [<ffffffff80286836>] ? __lru_cache_add+0x92/0xb2
[    1.592025]  [<ffffffff802cf008>] blkdev_readpage+0x13/0x15
[    1.592025]  [<ffffffff8027de06>] read_cache_page_async+0x90/0x134
[    1.592025]  [<ffffffff802ceff5>] ? blkdev_readpage+0x0/0x15
[    1.592025]  [<ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c
[    1.592025]  [<ffffffff8027deb8>] read_cache_page+0xe/0x45
[    1.592025]  [<ffffffff802f5170>] read_dev_sector+0x2e/0x93
[    1.592025]  [<ffffffff802f5f44>] adfspart_check_ICS+0x28/0x16c
[    1.592025]  [<ffffffff8025d427>] ? trace_hardirqs_on+0xd/0xf
[    1.592025]  [<ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c
[    1.592025]  [<ffffffff802f59c5>] rescan_partitions+0x168/0x2fb
[    1.592025]  [<ffffffff802ceae9>] __blkdev_get+0x259/0x336
[    1.592025]  [<ffffffff803ca1e2>] ? kobject_put+0x47/0x4b
[    1.592025]  [<ffffffff802cebd1>] blkdev_get+0xb/0xd
[    1.592025]  [<ffffffff802f5773>] register_disk+0xc4/0x12b
[    1.592025]  [<ffffffff803b2a7b>] add_disk+0xc3/0x12d
[    1.592025]  [<ffffffff808a1d4a>] ? mm_init+0x0/0x1a5
[    1.592025]  [<ffffffff808a1e73>] mm_init+0x129/0x1a5
[    1.592025]  [<ffffffff808a1d4a>] ? mm_init+0x0/0x1a5
[    1.592025]  [<ffffffff80209056>] _stext+0x56/0x130
[    1.592025]  [<ffffffff80274932>] ? register_irq_proc+0xae/0xca
[    1.592025]  [<ffffffff802f0000>] ? proc_pid_lookup+0xb4/0x18b
[    1.592025]  [<ffffffff8087f975>] kernel_init+0x132/0x18b
[    1.592025]  [<ffffffff8020d17a>] child_rip+0xa/0x20
[    1.592025]  [<ffffffff8020cb40>] ? restore_args+0x0/0x30
[    1.592025]  [<ffffffff8087f843>] ? kernel_init+0x0/0x18b
[    1.592025]  [<ffffffff8020d170>] ? child_rip+0x0/0x20
[    1.592025] ---[ end trace 7150b3b86da74e1e ]---
[    1.889858] ------------[ cut here ]------------[ve_plug+0x5f/0x91()
[    1.893848] Hardware name: H8SSL
[    1.893848] Modules linked in:
[    1.893848] Pid: 1, comm: swapper Tainted: G        W  2.6.29 #8
[    1.893848] Call Trace:
[    1.893848]  [<ffffffff8023c994>] warn_slowpath+0xd3/0xf2
[    1.893848]  [<ffffffff805c8411>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[    1.893848]  [<ffffffff8020cb40>] ? restore_args+0x0/0x30
[    1.893848]  [<ffffffff80254245>] ? __atomic_notifier_call_chain+0x0/0xb2
[    1.893848]  [<ffffffff805c90a3>] ? _spin_unlock_irq+0x31/0x51
[    1.893848]  [<ffffffff805c90bf>] ? _spin_unlock_irq+0x4d/0x51
[    1.893848]  [<ffffffff8044157d>] ? mm_make_request+0x4e/0x59
[    1.893848]  [<ffffffff8025a70e>] ? get_lock_stats+0x34/0x5e
[    1.893848]  [<ffffffff8025a75d>] ? put_lock_stats+0x25/0x27
[    1.893848]  [<ffffffff80441504>] ? mm_unplug_device+0x25/0x50
[    1.893848]  [<ffffffff803acf23>] blk_remove_plug+0x5f/0x91
[    1.893848]  [<ffffffff8044150f>] mm_unplug_device+0x30/0x50
[    1.893848]  [<ffffffff803ab74a>] blk_unplug+0x78/0x7d
[    1.893848]  [<ffffffff803ab75c>] blk_backing_dev_unplug+0xd/0xf
[    1.893848]  [<ffffffff802c853c>] block_sync_page+0x4a/0x4c
[    1.893848]  [<ffffffff8027da1c>] sync_page+0x44/0x4d
[    1.893848]  [<ffffffff805c66fd>] __wait_on_bit_lock+0x42/0x8a
[    1.893848]  [<ffffffff8027d9d8>] ? sync_page+0x0/0x4d
[    1.893848]  [<ffffffff8027d9c4>] __lock_page+0x64/0x6b
[    1.893848]  [<ffffffff802508db>] ? wake_bit_function+0x0/0x2a
[    1.893848]  [<ffffffff8027de4a>] read_cache_page_async+0xd4/0x134
[    1.893848]  [<ffffffff802ceff5>] ? blkdev_readpage+0x0/0x15
[    1.893848]  [<ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c
[    1.893848]  [<ffffffff8027deb8>] read_cache_page+0xe/0x45
[    1.893848]  [<ffffffff802f5170>] read_dev_sector+0x2e/0x93
[    1.893848]  [<ffffffff802f5f44>] adfspart_check_ICS+0x28/0x16c
[    1.893848]  [<ffffffff8025d427>] ? trace_hardirqs_on+0xd/0xf
[    1.893848]  [<ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c
[    1.893848]  [<ffffffff802f59c5>] rescan_partitions+0x168/0x2fb
[    1.893848]  [<ffffffff802ceae9>] __blkdev_get+0x259/0x336
[    1.893848]  [<ffffffff803ca1e2>] ? kobject_put+0x47/0x4b
[    1.893848]  [<ffffffff802cebd1>] blkdev_get+0xb/0xd
[    1.893848]  [<ffffffff802f5773>] register_disk+0xc4/0x12b
[    1.893848]  [<ffffffff803b2a7b>] add_disk+0xc3/0x12d
[    1.893848]  [<ffffffff808a1d4a>] ? mm_init+0x0/0x1a5
[    1.893848]  [<ffffffff808a1e73>] mm_init+0x129/0x1a5
[    1.893848]  [<ffffffff808a1d4a>] ? mm_init+0x0/0x1a5
[    1.893848]  [<ffffffff80209056>] _stext+0x56/0x130
[    1.893848]  [<ffffffff80274932>] ? register_irq_proc+0xae/0xca
[    1.893848]  [<ffffffff802f0000>] ? proc_pid_lookup+0xb4/0x18b
[    1.893848]  [<ffffffff8087f975>] kernel_init+0x132/0x18b
[    1.893848]  [<ffffffff8020d17a>] child_rip+0xa/0x20
[    1.893848]  [<ffffffff8020cb40>] ? restore_args+0x0/0x30
[    1.893848]  [<ffffffff8087f843>] ? kernel_init+0x0/0x18b
[    1.893848]  [<ffffffff8020d170>] ? child_rip+0x0/0x20
[    1.893848] ---[ end trace 7150b3b86da74e1f ]---

Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agoblock: simplify I/O stat accounting
Jerome Marchand [Wed, 22 Apr 2009 12:01:49 +0000 (14:01 +0200)]
block: simplify I/O stat accounting

This simplifies I/O stat accounting switching code and separates it
completely from I/O scheduler switch code.

Requests are accounted according to the state of their request queue
at the time of the request allocation. There is no need anymore to
flush the request queue when switching I/O accounting state.

Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agopktcdvd.h should include mempool.h
Alexander Beregalov [Tue, 21 Apr 2009 07:33:14 +0000 (09:33 +0200)]
pktcdvd.h should include mempool.h

Fix this build error:
In file included from fs/compat_ioctl.c:104:
include/linux/pktcdvd.h:285: error: expected specifier-qualifier-list before 'mempool_t'

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agoUSB: pwc : do not pass stack allocated buffers to USB core.
Martin Fuzzey [Tue, 21 Apr 2009 19:48:09 +0000 (21:48 +0200)]
USB: pwc : do not pass stack allocated buffers to USB core.

This is causes problems on platforms that have alignment requirements
for DMA transfers.

Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: otg: Fix bug on remove path without transceiver
Robert Jarzmik [Wed, 22 Apr 2009 03:33:10 +0000 (20:33 -0700)]
USB: otg: Fix bug on remove path without transceiver

In the case where a gadget driver is removed while no
transceiver was found at probe time, a bug in
otg_put_transceiver() will trigger.

Provide symetric calls for otg_get_transceiver() and
otg_put_transceiver(), wherever a transceiver was found or
not.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: correct error handling in cdc-wdm
Oliver Neukum [Mon, 20 Apr 2009 15:24:49 +0000 (17:24 +0200)]
USB: correct error handling in cdc-wdm

This patch to cdc-wdm

- checks for partial extra descriptors
- fixes a leak in the error case of probe
- checks for an exact number of endpoints
- adds a clarifying comment

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: removal of tty->low_latency hack dating back to the old serial code
Oliver Neukum [Mon, 20 Apr 2009 15:28:53 +0000 (17:28 +0200)]
USB: removal of tty->low_latency hack dating back to the old serial code

This removes tty->low_latency from all USB serial drivers that push
data into the tty layer at hard interrupt context. It's no longer needed
and actually harmful.

Signed-off-by: Oliver Neukum <oliver@neukum.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: serial: sierra driver bug fix for composite interface
Elina Pasheva [Wed, 22 Apr 2009 00:54:42 +0000 (17:54 -0700)]
USB: serial: sierra driver bug fix for composite interface

This patch fixes a problem in sierra_send_setup() function when
composite devices are used. One should not be sending ACM commands to
interfaces that are OBEX. Doing this causes an apparent failure as the
ACM command has to time out before the interface can start being used.

Signed-off-by: Elina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: gadget: omap_udc uses platform_driver_probe()
David Brownell [Thu, 16 Apr 2009 20:51:46 +0000 (13:51 -0700)]
USB: gadget: omap_udc uses platform_driver_probe()

We now have a more correct solution for shrinking runtime driver
footprints than just marking probe() as __init ... use it.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: ci13xxx_udc: fix build error
Matthias Kaehlcke [Wed, 15 Apr 2009 20:28:36 +0000 (22:28 +0200)]
USB: ci13xxx_udc: fix build error

Fix build error in the MIPS USB IP core family device controller driver.
The driver calls udelay() without including linux/delay.h

Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: musb: Prevent multiple includes of musb.h
Mark A. Greer [Wed, 22 Apr 2009 03:52:54 +0000 (20:52 -0700)]
USB: musb: Prevent multiple includes of musb.h

Add #ifndef to musb header file to prevent multiple inclusions.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: pass mem_flags to dma_alloc_coherent
Johannes Berg [Sat, 18 Apr 2009 09:00:39 +0000 (11:00 +0200)]
USB: pass mem_flags to dma_alloc_coherent

When I want to use my webcam, I get:

                                 vvvvvvv
cheese: page allocation failure. order:5, mode:0x8004
Pid: 8100, comm: cheese Not tainted 2.6.30-rc2-wl-dirty #102
Call Trace:
 [<ffffffff802c5d8e>] __alloc_pages_internal+0x3fe/0x520
 [<ffffffff80210a20>] dma_generic_alloc_coherent+0x90/0x120
 [<ffffffffa001c91e>] hcd_buffer_alloc+0xee/0x130 [usbcore]
 [<ffffffffa000d52d>] usb_buffer_alloc+0x2d/0x40 [usbcore]
 [<ffffffffa0160e14>] uvc_alloc_urb_buffers+0x84/0x140 [uvcvideo]
 [<ffffffffa0160ff6>] uvc_init_video+0x126/0x400 [uvcvideo]
 [...]

Oddly, I remembered fixing this and putting in __GFP_NOWARN
because uvcvideo retries a smaller allocation. However, the
allocation function doesn't pass the gfp flags through to
dma_alloc_coherent so we still get the warning!

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: g_file_storage: fix use-after-free bug when closing files
Alan Stern [Thu, 16 Apr 2009 19:37:28 +0000 (15:37 -0400)]
USB: g_file_storage: fix use-after-free bug when closing files

This patch (as1231) fixes a use-after-free bug in g_file_storage.  A
device's name may not be available after the device is unregistered,
even if the device structure itself is still allocated.  Since
close_backing_file() prints a LUN's name for debugging, it shouldn't
be called after the LUN has been unregistered.

That whole area needed to be cleaned up; the backing files were
getting closed in a couple of different places.  The patch fixes
things so that they get closed in just one place, as part of the
unbind procedure, immediately before the LUN is unregistered.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: ehci-sched.c: EHCI SITD scheduling bugfix
Dan Streetman [Tue, 21 Apr 2009 17:37:12 +0000 (13:37 -0400)]
USB: ehci-sched.c: EHCI SITD scheduling bugfix

Without this patch, the driver won't check that the last fully-occupied
uframe for a new split transaction was vacant beforehand.  This can
lead to a situation in which the first 188 bytes of a 192-byte
isochronous transfer are scheduled in the same uframe as an existing
interrupt transfer.  The resulting schedule looks like this:

       uframe 0: 188-byte isoc-OUT SSPLIT, 8-byte int-IN SSPLIT
       uframe 1: 4-byte isoc-OUT SSPLIT

The SSPLITs are intermingled, causing an error in the downstream hub's
TT.

If you are having problems with devices or hub ports resetting, or failed
interrupt transfers, when you start using a USB audio or video (Isochronous)
device, this patch may help.

Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Reported-by: Kung James <kong1191@gmail.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
15 years agoUSB: fix mos7840 problem with minor numbers
Tony Cook [Sat, 18 Apr 2009 13:12:18 +0000 (22:42 +0930)]
USB: fix mos7840 problem with minor numbers

This patch fixes a problem with any mos7840 device where the use of the field "minor" before it is
initialised results in all the devices being overlaid in memory (minor = 0 for all instances)

Contributed by: Phillip Branch

Signed-off-by: Tony Cook <tony-cook@bigpond.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: mos7840: add new device id
Tony Cook [Sat, 18 Apr 2009 13:12:18 +0000 (22:42 +0930)]
USB: mos7840: add new device id

add USB ids for the mos7840 based ATEN International serial devices.

Contributed by: Phillip Branch

Signed-off-by: Tony Cook <tony-cook@bigpond.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: musb: fix build when !CONFIG_PM
Alexander Beregalov [Fri, 17 Apr 2009 11:19:14 +0000 (15:19 +0400)]
USB: musb: fix build when !CONFIG_PM

Fix this build error when CONFIG_PM is not set:
drivers/usb/musb/musb_core.c:2232: error: 'musb_resume_early' undeclared here

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: musb: Remove my email address from few musb related drivers
Jarkko Nikula [Fri, 17 Apr 2009 10:52:00 +0000 (13:52 +0300)]
USB: musb: Remove my email address from few musb related drivers

This email address is going to expire soon and my contribution to musb
is next to zero so remove it.

Signed-off-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Cc: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: Gadget: MIPS CI13xxx UDC bugfixes
David Lopo [Thu, 16 Apr 2009 21:35:24 +0000 (14:35 -0700)]
USB: Gadget: MIPS CI13xxx UDC bugfixes

Bug Fix: high speed detection in LPM mode
Bug Fix: max packet size configuration when switching between HS and FS

Signed-off-by: David Lopo <dlopo@chipidea.mips.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: Unusual Device support for Gold MP3 Player Energy
Chuck Short [Tue, 14 Apr 2009 18:50:31 +0000 (20:50 +0200)]
USB: Unusual Device support for Gold MP3 Player Energy

Reported by Alessio Treglia on
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/125250

User was getting the following errors in dmesg:

[ 2158.139386] sd 5:0:0:1: ioctl_internal_command return code = 8000002
[ 2158.139390] : Current: sense key: No Sense
[ 2158.139393] Additional sense: No additional sense information

Adds unusual device support.

modified:   drivers/usb/storage/unusual_devs.h

Signed-off-by: Chuck Short <zulcss@ubuntu.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoUSB: serial: fix lifetime and locking problems
Alan Stern [Tue, 14 Apr 2009 15:31:02 +0000 (11:31 -0400)]
USB: serial: fix lifetime and locking problems

This patch (as1229) fixes a few lifetime and locking problems in the
usb-serial driver.  The main symptom is that an invalid kevent is
created when the serial device is unplugged while a connection is
active.

Ports should be unregistered when device is disconnected,
not when the parent usb_serial structure is deallocated.

Each open file should hold a reference to the corresponding
port structure, and the reference should be released when
the file is closed.

serial->disc_mutex should be acquired in serial_open(), to
resolve the classic race between open and disconnect.

serial_close() doesn't need to hold both serial->disc_mutex
and port->mutex at the same time.

Release the subdriver's module reference only after releasing
all the other references, in case one of the release routines
needs to invoke some code in the subdriver module.

Replace a call to flush_scheduled_work() (which is prone to
deadlocks) with cancel_work_sync().  Also, add a call to
cancel_work_sync() in the disconnect routine.

Reduce the scope of serial->disc_mutex in serial_disconnect().
The only place it really needs to protect is where the
"disconnected" flag is set.

This fixes the bug reported in

http://bugs.freedesktop.org/show_bug.cgi?id=20703

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Dan Williams <dcbw@redhat.com>
Tested-by: Ming Lei <tom.leiming@gmail.com>
Reviewed-by: Oliver Neukum <oliver@neukum.org>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
15 years agoMAINTAINERS: update IDE entry
Bartlomiej Zolnierkiewicz [Thu, 23 Apr 2009 20:53:45 +0000 (22:53 +0200)]
MAINTAINERS: update IDE entry

By a popular demand quilt tree was replaced by a git one.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
15 years agopalm_bk3710: palm_bk3710_udmatimings[] CodingStyle fixup
Bartlomiej Zolnierkiewicz [Thu, 23 Apr 2009 20:53:45 +0000 (22:53 +0200)]
palm_bk3710: palm_bk3710_udmatimings[] CodingStyle fixup

Remove superfluous commas and add missing whitespaces.

Noticed-by: Joe Perches <joe@perches.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
15 years agopalm_bk3710: those registers/bitfields don't exist
David Brownell [Thu, 23 Apr 2009 20:53:43 +0000 (22:53 +0200)]
palm_bk3710: those registers/bitfields don't exist

Bugfixes noted by checking the code against the controller
documentation (TI document number SPRUE21):

 - Remove declarations for eight non-existent registers (!);
   and remove accesses to two of them.

 - Remove access to various non-existent bitfields in some of
   the registers which *do* exist (those fields must-be-zero).

 - Provide comment to replace bogus reset logic (removed above,
   it relied on non-existent bitfields).  Resets require GPIO
   help; this driver doesn't currently know about that.

With some minor cleanup:  relocate a comment, avoid an extra
lookup of the PIO timings.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
15 years ago[S390] update default configuration.
Martin Schwidefsky [Thu, 23 Apr 2009 11:58:11 +0000 (13:58 +0200)]
[S390] update default configuration.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] omit frame pointers on s390 when possible
Heiko Carstens [Thu, 23 Apr 2009 11:58:10 +0000 (13:58 +0200)]
[S390] omit frame pointers on s390 when possible

Always omit frame pointers on s390. They aren't too useful for the
kernel since we have already the kernel stack backchain which allows
us to walk the kernel stack.
So eleminate the extra code for frame pointers. Only allow the extra
code for the function tracer since the gcc compile options -pg and
-fomit-frame-pointer are incompatible.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] Use tape_generic_offline directly.
Frank Munzert [Thu, 23 Apr 2009 11:58:09 +0000 (13:58 +0200)]
[S390] Use tape_generic_offline directly.

tape_3590_offline and tape_34xx_offline are removed and tape_generic_offline
is called directly instead.

Signed-off-by: Frank Munzert <munzert@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] /proc/stat idle field for idle cpus
Martin Schwidefsky [Thu, 23 Apr 2009 11:58:08 +0000 (13:58 +0200)]
[S390] /proc/stat idle field for idle cpus

The cpu idle field in the output of /proc/stat is too small for cpus
that have been idle for more than a tick. Add the architecture hook
arch_idle_time that allows to add the not accounted idle time of a
sleeping cpu without waking the cpu.

The s390 implementation of arch_idle_time uses the already existing
s390_idle_data per_cpu variable to find the sleep time of a neighboring
idle cpu.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] appldata: avoid deadlock with appldata_mem
Gerald Schaefer [Thu, 23 Apr 2009 11:58:07 +0000 (13:58 +0200)]
[S390] appldata: avoid deadlock with appldata_mem

The appldata_ops callbacks are called with a spin_lock held. But the
appldata_mem callback then calls all_vm_events(), which calls
get_online_cpus(), which might sleep. This possible deadlock is fixed
by using a mutex instead of a spin_lock.

Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years ago[S390] ipl: fix compile breakage
Heiko Carstens [Thu, 23 Apr 2009 11:58:06 +0000 (13:58 +0200)]
[S390] ipl: fix compile breakage

Fix this for !CONFIG_SMP:

arch/s390/kernel/ipl.c: In function 'stop_run':
arch/s390/kernel/ipl.c:1461: error: implicit declaration of function 'signal_processor'

Reported-by: Sachin Sant <sachinp@in.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
15 years agoGFS2: Ensure that the inode goal block settings are updated
Steven Whitehouse [Thu, 23 Apr 2009 07:59:41 +0000 (08:59 +0100)]
GFS2: Ensure that the inode goal block settings are updated

GFS2 has a goal block associated with each inode indicating the
search start position for future block allocations (in fact there
are two, but thats for backward compatibility with GFS1 as they
are set to identical locations in GFS2).

In some circumstances, depending on the ordering of updates to
the inode it was possible for the goal block settings to not
be updated on disk. This patch ensures that the goal block will
always get updated, thus reducing the potential for searching
the same (already allocated) blocks again when looking for free
space during block allocation.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
15 years agoGFS2: Fix bug in block allocation
Steven Whitehouse [Thu, 23 Apr 2009 07:54:02 +0000 (08:54 +0100)]
GFS2: Fix bug in block allocation

The new bitfit algorithm was counting from the wrong end of
64 bit words in the bitfield. This fixes it by using __ffs64
instead of fls64

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
15 years agobitops: Add __ffs64 bitop
Steven Whitehouse [Thu, 23 Apr 2009 07:48:15 +0000 (08:48 +0100)]
bitops: Add __ffs64 bitop

Finds the first set bit in a 64 bit word. This is required in order
to fix a bug in GFS2, but I think it should be a generic function
in case of future users.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Reviewed-by: Willy Tarreau <w@1wt.eu>
15 years agoeCryptfs: Larger buffer for encrypted symlink targets
Tyler Hicks [Thu, 16 Apr 2009 23:35:37 +0000 (18:35 -0500)]
eCryptfs: Larger buffer for encrypted symlink targets

When using filename encryption with eCryptfs, the value of the symlink
in the lower filesystem is encrypted and stored as a Tag 70 packet.
This results in a longer symlink target than if the target value wasn't
encrypted.

Users were reporting these messages in their syslog:

[ 45.653441] ecryptfs_parse_tag_70_packet: max_packet_size is [56]; real
packet size is [51]
[ 45.653444] ecryptfs_decode_and_decrypt_filename: Could not parse tag
70 packet from filename; copying through filename as-is

This was due to bufsiz, one the arguments in readlink(), being used to
when allocating the buffer passed to the lower inode's readlink().
That symlink target may be very large, but when decoded and decrypted,
could end up being smaller than bufsize.

To fix this, the buffer passed to the lower inode's readlink() will
always be PATH_MAX in size when filename encryption is enabled.  Any
necessary truncation occurs after the decoding and decrypting.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
15 years agoeCryptfs: Lock lower directory inode mutex during lookup
Tyler Hicks [Wed, 22 Apr 2009 21:27:12 +0000 (16:27 -0500)]
eCryptfs: Lock lower directory inode mutex during lookup

This patch locks the lower directory inode's i_mutex before calling
lookup_one_len() to find the appropriate dentry in the lower filesystem.
This bug was found thanks to the warning set in commit 2f9092e1.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
15 years agom68k: Update defconfigs for 2.6.30-rc3
Geert Uytterhoeven [Sun, 29 Mar 2009 12:23:44 +0000 (14:23 +0200)]
m68k: Update defconfigs for 2.6.30-rc3

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
15 years agom68k,m68knommu: Wire up preadv and pwritev
Geert Uytterhoeven [Thu, 9 Apr 2009 20:23:51 +0000 (22:23 +0200)]
m68k,m68knommu: Wire up preadv and pwritev

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
15 years agoscsi: a4000 - Correct driver unregistration in case of failure
Geert Uytterhoeven [Thu, 9 Apr 2009 19:22:42 +0000 (21:22 +0200)]
scsi: a4000 - Correct driver unregistration in case of failure

commit 7a192ec334cab9fafe3a8665a65af398b0e24730 ("platform driver: fix
incorrect use of 'platform_bus_type' with 'struct device_driver') turned a
driver_UNregister into platform_driver_REGISTER. Correct this to
platform_driver_UNregister.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
15 years agomediabay: fix build for CONFIG_BLOCK=n
Bartlomiej Zolnierkiewicz [Wed, 22 Apr 2009 18:33:41 +0000 (20:33 +0200)]
mediabay: fix build for CONFIG_BLOCK=n

On Tuesday 14 April 2009 20:31:21 Subrata Modak wrote:
> Observed the following build error:
> ---
> CC      drivers/macintosh/mediabay.o
> In file included from drivers/macintosh/mediabay.c:21:
> include/linux/ide.h:605: error: field ‘request_sense_rq’ has incomplete
> type
> make[2]: *** [drivers/macintosh/mediabay.o] Error 1
> make[1]: *** [drivers/macintosh] Error 2
> make: *** [drivers] Error 2
> ---

mediabay shouldn't include <linux/ide.h> unconditionally so
remove the superfluous include from mediabay.c (<asm/mediabay.h>
will pull <linux/ide.h> in for CONFIG_BLK_DEV_IDE_PMAC=y).

Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
15 years agoide: Stop disks on reboot for laptop which cuts power
Bruno Prémont [Wed, 22 Apr 2009 18:33:41 +0000 (20:33 +0200)]
ide: Stop disks on reboot for laptop which cuts power

My laptop (Acer Travelmate 660) always cuts the power when rebooting
which causes the disk to emergency-park it's head.

Add a dmi check to stop disk as for shutdown on this laptop.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
15 years agoide-cd: fix kernel crash on hppa regression
Helge Deller [Wed, 22 Apr 2009 18:33:40 +0000 (20:33 +0200)]
ide-cd: fix kernel crash on hppa regression

With 2.6.30-rc2 I face a kernel crash on the 32bit hppa architecture
due to ide-cd when udev creates the device nodes at startup:

Kernel Fault: Code=26 regs=8ed34c40 (Addr=00000024)
IASQ: 00000000 00000000 IAOQ: 1034b5ac 1034b5b0
 IIR: 4ab30048    ISR: 00000000  IOR: 00000024
 CPU:        0   CR30: 8ed34000 CR31: ffff55ff
 ORIG_R28: 00000000
 IAOQ[0]: ide_complete_rq+0x2c/0x70
 IAOQ[1]: ide_complete_rq+0x30/0x70
 RP(r2): cdrom_newpc_intr+0x178/0x46c
Backtrace:
 [<1035c608>] cdrom_newpc_intr+0x178/0x46c
 [<1034c494>] ide_intr+0x1b0/0x214
 [<1016d284>] handle_IRQ_event+0x70/0x150
 [<1016d4b0>] __do_IRQ+0x14c/0x1cc
 [<102f7864>] superio_interrupt+0x88/0xbc
 [<1016d284>] handle_IRQ_event+0x70/0x150
 [<1016d4b0>] __do_IRQ+0x14c/0x1cc
 [<10112efc>] do_cpu_irq_mask+0x9c/0xd0
 [<10116068>] intr_return+0x0/0x4

This crash seems to happen due to an uninitialized variable "rc".
The compiler even warns about that:
  CC      drivers/ide/ide-cd.o
/mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c: In function `cdrom_newpc_intr':
/mnt/sda4/home/cvs/parisc/git-kernel/linus-linux-2.6/drivers/ide/ide-cd.c:612: warning: `rc' might be used uninitialized in this function

After applying the trivial patch below, which just initializes
the variable to zero, the kernel doesn't crash any longer:

Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...
hda: command error: status=0x51 { DriveReady SeekComplete Error }
hda: command error: error=0x54 <3>{ AbortedCommand LastFailedSense=0x05 }
ide: failed opcode was: unknown
done.

Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Cc: Linus <torvalds@linux-foundation.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
15 years agopalm_bk3710: UDMA performance fix
David Brownell [Wed, 22 Apr 2009 18:33:40 +0000 (20:33 +0200)]
palm_bk3710: UDMA performance fix

Fix UDMA throughput bug:  tCYC averages t2CYCTYP/2, but the code
previously assumed it was the same as t2CYCTYP.  (That is, it was
using just one clock edge, not both.)  Move the table's type
declaration so it's adjacent to the table, making it more clear
what those numbers mean.

On one system this change increased throughput by almost 4x: UDMA/66
sometimes topped 23 MB/sec (on a drive known to do much better).  On
another system it was around a 10% win (UDMA/66 up to 7+ MB/sec).

The difference might be caused by the ratio between memory and IDE
clocks.  In the system with large speedup, this was exactly 2 (as a
workaround for a rev 1.1 silicon bug).  The other system used a more
standard ratio of 1.63 (and rev 2.1 silicon) ... clock domain synch
might have some issues, they're not unheard-of.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
15 years agoKVM: Unregister cpufreq notifier on unload
Jan Kiszka [Fri, 17 Apr 2009 17:24:58 +0000 (19:24 +0200)]
KVM: Unregister cpufreq notifier on unload

Properly unregister cpufreq notifier on onload if it was registered
during init.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
15 years agoKVM: x86: release time_page on vcpu destruction
Joerg Roedel [Wed, 25 Feb 2009 15:08:31 +0000 (16:08 +0100)]
KVM: x86: release time_page on vcpu destruction

Not releasing the time_page causes a leak of that page or the compound
page it is situated in.

Cc: stable@kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
15 years agoKVM: Fix overlapping check for memory slots
Jan Kiszka [Mon, 13 Apr 2009 09:59:32 +0000 (11:59 +0200)]
KVM: Fix overlapping check for memory slots

When checking for overlapping slots on registration of a new one, kvm
currently also considers zero-length (ie. deleted) slots and rejects
requests incorrectly. This finally denies user space from joining slots.
Fix the check by skipping deleted slots and advertise this via a
KVM_CAP_JOIN_MEMORY_REGIONS_WORKS.

Cc: stable@kernel.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
15 years agoKVM: MMU: disable global page optimization
Marcelo Tosatti [Sun, 5 Apr 2009 17:54:46 +0000 (14:54 -0300)]
KVM: MMU: disable global page optimization

Complexity to fix it not worthwhile the gains, as discussed
in http://article.gmane.org/gmane.comp.emulators.kvm.devel/28649.

Cc: stable@kernel.org
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
15 years agoKVM: ia64: fix locking order entering guest
Jes Sorensen [Thu, 9 Apr 2009 14:38:14 +0000 (16:38 +0200)]
KVM: ia64: fix locking order entering guest

Reorder locking as down_read() may return with local interrupts enabled,
which means we could go into vti_vcpu_run() with interrupts enabled.

This caused random crashes on the Altix as the timer interrupt tried
to read a memory mapped clock source, for which the TLB had not yet been
reinstated in the exit, before ipsr was retored.

Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
15 years agoKVM: MMU: Fix off-by-one calculating large page count
Avi Kivity [Sun, 29 Mar 2009 13:31:25 +0000 (16:31 +0300)]
KVM: MMU: Fix off-by-one calculating large page count

The large page initialization code concludes there are two large pages spanned
by a slot covering 1 (small) page starting at gfn 1.  This is incorrect, and
also results in incorrect write_count initialization in some cases (base = 1,
npages = 513 for example).

Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
15 years agosparc: Fix bus type probing for ESP and LE devices.
David S. Miller [Fri, 17 Apr 2009 11:14:15 +0000 (04:14 -0700)]
sparc: Fix bus type probing for ESP and LE devices.

If there is a dummy "espdma" or "ledma" parent device above ESP scsi
or LE ethernet device nodes, we have to match the bus as SBUS.

Otherwise the address and size cell counts are wrong and we don't
calculate the final physical device resource values correctly at all.

Commit 5280267c1dddb8d413595b87dc406624bb497946 ("sparc: Fix handling
of LANCE and ESP parent nodes in of_device.c") was meant to fix this
problem, but that only influences the inner loop of
build_device_resources().  We need this logic to also kick in at the
beginning of build_device_resources() as well, when we make the first
attempt to determine the device's immediate parent bus type for 'reg'
property element extraction.

Based almost entirely upon a patch by Friedrich Oslage.

Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetfilter: ctnetlink: fix gcc warning during compilation
Pablo Neira Ayuso [Wed, 22 Apr 2009 09:26:37 +0000 (02:26 -0700)]
netfilter: ctnetlink: fix gcc warning during compilation

This patch fixes a (bogus?) gcc warning during compilation:

net/netfilter/nf_conntrack_netlink.c:1234: warning: 'helpname' may be used uninitialized in this function
net/netfilter/nf_conntrack_netlink.c:991: warning: 'helpname' may be used uninitialized in this function

In fact, helpname is initialized by ctnetlink_parse_help() so
I cannot see a way to use it without being initialized.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoeCryptfs: Remove ecryptfs_unlink_sigs warnings
Tyler Hicks [Wed, 22 Apr 2009 09:08:46 +0000 (04:08 -0500)]
eCryptfs: Remove ecryptfs_unlink_sigs warnings

A feature was added to the eCryptfs umount helper to automatically
unlink the keys used for an eCryptfs mount from the kernel keyring upon
umount.  This patch keeps the unrecognized mount option warnings for
ecryptfs_unlink_sigs out of the logs.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
15 years agoeCryptfs: Fix data corruption when using ecryptfs_passthrough
Tyler Hicks [Mon, 13 Apr 2009 20:29:27 +0000 (15:29 -0500)]
eCryptfs: Fix data corruption when using ecryptfs_passthrough

ecryptfs_passthrough is a mount option that allows eCryptfs to allow
data to be written to non-eCryptfs files in the lower filesystem.  The
passthrough option was causing data corruption due to it not always
being treated as a non-eCryptfs file.

The first 8 bytes of an eCryptfs file contains the decrypted file size.
This value was being written to the non-eCryptfs files, too.  Also,
extra 0x00 characters were being written to make the file size a
multiple of PAGE_CACHE_SIZE.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
15 years agoeCryptfs: Print FNEK sig properly in /proc/mounts
Tyler Hicks [Mon, 16 Mar 2009 17:35:12 +0000 (12:35 -0500)]
eCryptfs: Print FNEK sig properly in /proc/mounts

The filename encryption key signature is not properly displayed in
/proc/mounts.  The "ecryptfs_sig=" mount option name is displayed for
all global authentication tokens, included those for filename keys.

This patch checks the global authentication token flags to determine if
the key is a FEKEK or FNEK and prints the appropriate mount option name
before the signature.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
15 years agoeCryptfs: NULL pointer dereference in ecryptfs_send_miscdev()
Tyler Hicks [Sun, 15 Mar 2009 19:17:01 +0000 (14:17 -0500)]
eCryptfs: NULL pointer dereference in ecryptfs_send_miscdev()

If data is NULL, msg_ctx->msg is set to NULL and then dereferenced
afterwards.  ecryptfs_send_raw_message() is the only place that
ecryptfs_send_miscdev() is called with data being NULL, but the only
caller of that function (ecryptfs_process_helo()) is never called.  In
short, there is currently no way to trigger the NULL pointer
dereference.

This patch removes the two unused functions and modifies
ecryptfs_send_miscdev() to remove the NULL dereferences.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
15 years agoeCryptfs: Copy lower inode attrs before dentry instantiation
Tyler Hicks [Thu, 12 Mar 2009 05:19:46 +0000 (00:19 -0500)]
eCryptfs: Copy lower inode attrs before dentry instantiation

Copies the lower inode attributes to the upper inode before passing the
upper inode to d_instantiate().  This is important for
security_d_instantiate().

The problem was discovered by a user seeing SELinux denials like so:

type=AVC msg=audit(1236812817.898:47): avc:  denied  { 0x100000 } for
pid=3584 comm="httpd" name="testdir" dev=ecryptfs ino=943872
scontext=root:system_r:httpd_t:s0
tcontext=root:object_r:httpd_sys_content_t:s0 tclass=file

Notice target class is file while testdir is really a directory,
confusing the permission translation (0x100000) due to the wrong i_mode.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
15 years agonet/netrom: Fix socket locking
Jean Delvare [Wed, 22 Apr 2009 07:49:51 +0000 (00:49 -0700)]
net/netrom: Fix socket locking

Patch "af_rose/x25: Sanity check the maximum user frame size"
(commit 83e0bbcbe2145f160fbaa109b0439dae7f4a38a9) from Alan Cox got
locking wrong. If we bail out due to user frame size being too large,
we must unlock the socket beforehand.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetlabel: Always remove the correct address selector
Paul Moore [Tue, 21 Apr 2009 10:04:22 +0000 (10:04 +0000)]
netlabel: Always remove the correct address selector

The NetLabel address selector mechanism has a problem where it can get
mistakenly remove the wrong selector when similar addresses are used.  The
problem is caused when multiple addresses are configured that have different
netmasks but the same address, e.g. 127.0.0.0/8 and 127.0.0.0/24.  This patch
fixes the problem.

Reported-by: Etienne Basset <etienne.basset@numericable.fr>
Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
Tested-by: Etienne Basset <etienne.basset@numericable.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoucc_geth.c: Fix upsmr setting in RMII mode
Heiko Schocher [Mon, 20 Apr 2009 22:36:43 +0000 (22:36 +0000)]
ucc_geth.c: Fix upsmr setting in RMII mode

If using the UCC on a MPC8360 in RMII mode, don;t set
UCC_GETH_UPSMR_RPM bit in the upsmr register.

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Li Yang <leoli@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years ago8139too: fix HW initial flow
Jianjun kong [Mon, 20 Apr 2009 23:48:25 +0000 (23:48 +0000)]
8139too: fix HW initial flow

While ifconfig eth0 up kernel calls open() of 8139 driver(8139too.c).
In rtl8139_hw_start() of rtl8139_open(), 8139 driver enable RX before
setting up the DMA buffer address. In this interval where RX was
enabled and DMA buffer address is not yet set up, any incoming
broadcast packet would be send to a strange physical address:
0x003e8800 which is the default value of DMA buffer address.
Unfortunately, this address is used by Linux kernel. So kernel panics.
This patch fix it by setting up DMA buffer address before RX enabled
and everything is fine even under broadcast packets attack.

Signed-off-by: Jonathan Lin <jon.lin@vatics.com>
Signed-off-by: Amos Kong <jianjun@zeuux.org>
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoMerge commit 'alsa/master' into for-linus
Takashi Iwai [Wed, 22 Apr 2009 07:09:29 +0000 (09:09 +0200)]
Merge commit 'alsa/master' into for-linus

* commit 'alsa/master':
  [ALSA] intel8x0: another attempt to fix ac97_clock measure routine
  [ALSA] ac97_codec: increase timeout for analog subsections

15 years agoaf_iucv: Fix race when queuing incoming iucv messages
Hendrik Brueckner [Tue, 21 Apr 2009 06:04:24 +0000 (06:04 +0000)]
af_iucv: Fix race when queuing incoming iucv messages

AF_IUCV runs into a race when queuing incoming iucv messages
and receiving the resulting backlog.

If the Linux system is under pressure (high load or steal time),
the message queue grows up, but messages are not received and queued
onto the backlog queue. In that case, applications do not
receive any data with recvmsg() even if AF_IUCV puts incoming
messages onto the message queue.

The race can be avoided if the message queue spinlock in the
message_pending callback is spreaded across the entire callback
function.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoaf_iucv: Test additional sk states in iucv_sock_shutdown
Hendrik Brueckner [Tue, 21 Apr 2009 06:04:23 +0000 (06:04 +0000)]
af_iucv: Test additional sk states in iucv_sock_shutdown

Add few more sk states in iucv_sock_shutdown().

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoaf_iucv: Reject incoming msgs if RECV_SHUTDOWN is set
Hendrik Brueckner [Tue, 21 Apr 2009 06:04:22 +0000 (06:04 +0000)]
af_iucv: Reject incoming msgs if RECV_SHUTDOWN is set

Reject incoming iucv messages if the receive direction has been shut down.
It avoids that the queue of outstanding messages increases and exceeds the
message limit of the iucv communication path.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoaf_iucv: fix oops in iucv_sock_recvmsg() for MSG_PEEK flag
Hendrik Brueckner [Tue, 21 Apr 2009 06:04:21 +0000 (06:04 +0000)]
af_iucv: fix oops in iucv_sock_recvmsg() for MSG_PEEK flag

If iucv_sock_recvmsg() is called with MSG_PEEK flag set, the skb is enqueued
twice. If the socket is then closed, the pointer to the skb is freed twice.

Remove the skb_queue_head() call for MSG_PEEK, because the skb_recv_datagram()
function already handles MSG_PEEK (does not dequeue the skb).

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoaf_iucv: consider state IUCV_CLOSING when closing a socket
Ursula Braun [Tue, 21 Apr 2009 06:04:20 +0000 (06:04 +0000)]
af_iucv: consider state IUCV_CLOSING when closing a socket

Make sure a second invocation of iucv_sock_close() guarantees proper
freeing of an iucv path.

Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agocfq-iosched: use the default seek distance when there aren't enough seek samples
Jeff Moyer [Tue, 21 Apr 2009 05:31:56 +0000 (07:31 +0200)]
cfq-iosched: use the default seek distance when there aren't enough seek samples

If the cfq io context doesn't have enough samples yet to provide a mean
seek distance, then use the default threshold we have for seeky IO instead
of defaulting to 0.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agocfq-iosched: make seek_mean converge more quickly
Jeff Moyer [Tue, 21 Apr 2009 05:25:04 +0000 (07:25 +0200)]
cfq-iosched: make seek_mean converge more quickly

Right now, depending on the first sector to which a process issues I/O,
the seek time may start out way out of whack. So make sure we start
with 0 sectors in seek, instead of the offset of the first request
issued.

Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agoblock: make blk_abort_queue() ignore non-request based devices
Jens Axboe [Fri, 17 Apr 2009 06:36:50 +0000 (08:36 +0200)]
block: make blk_abort_queue() ignore non-request based devices

There's nothing to do for those devices, since the timeout handling is
based on requests.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agoblock: include empty disks in /proc/diskstats
Tejun Heo [Fri, 17 Apr 2009 06:34:48 +0000 (08:34 +0200)]
block: include empty disks in /proc/diskstats

/proc/diskstats used to show stats for all disks whether they're
zero-sized or not and their non-zero partitions.  Commit
074a7aca7afa6f230104e8e65eba3420263714a5 accidentally changed the
behavior such that it doesn't print out zero sized disks.  This patch
implements DISK_PITER_INCL_EMPTY_PART0 flag to partition iterator and
uses it in diskstats_show() such that empty part0 is shown in
/proc/diskstats.

Reported and bisectd by Dianel Collins.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Daniel Collins <solemnwarning@solemnwarning.no-ip.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agobio: use bio_kmalloc() in copy/map functions
Tejun Heo [Wed, 15 Apr 2009 13:10:27 +0000 (22:10 +0900)]
bio: use bio_kmalloc() in copy/map functions

Impact: remove possible deadlock condition

There is no reason to use mempool backed allocation for map functions.
Also, because kern mapping is used inside LLDs (e.g. for EH), using
mempool backed allocation can lead to deadlock under extreme
conditions (mempool already consumed by the time a request reached EH
and requests are blocked on EH).

Switch copy/map functions to bio_kmalloc().

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agobio: fix bio_kmalloc()
Tejun Heo [Wed, 15 Apr 2009 17:50:51 +0000 (19:50 +0200)]
bio: fix bio_kmalloc()

Impact: fix bio_kmalloc() and its destruction path

bio_kmalloc() was broken in two ways.

* bvec_alloc_bs() first allocates bvec using kmalloc() and then
  ignores it and allocates again like non-kmalloc bvecs.

* bio_kmalloc_destructor() didn't check for and free bio integrity
  data.

This patch fixes the above problems.  kmalloc patch is separated out
from bio_alloc_bioset() and allocates the requested number of bvecs as
inline bvecs.

* bio_alloc_bioset() no longer takes NULL @bs.  None other than
  bio_kmalloc() used it and outside users can't know how it was
  allocated anyway.

* Define and use BIO_POOL_NONE so that pool index check in
  bvec_free_bs() triggers if inline or kmalloc allocated bvec gets
  there.

* Relocate destructors on top of each allocation function so that how
  they're used is more clear.

Jens Axboe suggested allocating bvecs inline.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agoblock: fix queue bounce limit setting
Tejun Heo [Wed, 15 Apr 2009 13:10:25 +0000 (22:10 +0900)]
block: fix queue bounce limit setting

Impact: don't set GFP_DMA in q->bounce_gfp unnecessarily

All DMA address limits are expressed in terms of the last addressable
unit (byte or page) instead of one plus that.  However, when
determining bounce_gfp for 64bit machines in blk_queue_bounce_limit(),
it compares the specified limit against 0x100000000UL to determine
whether it's below 4G ending up falsely setting GFP_DMA in
q->bounce_gfp.

As DMA zone is very small on x86_64, this makes larger SG_IO transfers
very eager to trigger OOM killer.  Fix it.  While at it, rename the
parameter to @dma_mask for clarity and convert comment to proper
winged style.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agoblock: fix SG_IO vector request data length handling
Tejun Heo [Wed, 15 Apr 2009 13:10:24 +0000 (22:10 +0900)]
block: fix SG_IO vector request data length handling

Impact: fix SG_IO behavior such that it matches the documentation

SG_IO howto says that if ->dxfer_len and sum of iovec disagress, the
shorter one wins.  However, the current implementation returns -EINVAL
for such cases.  Trim iovc if it's longer than ->dxfer_len.

This patch uses iov_*() helpers which take struct iovec * by casting
struct sg_iovec * to it.  sg_iovec is always identical to iovec and
this will be further cleaned up with later patches.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agoscatterlist: make sure sg_miter_next() doesn't return 0 sized mappings
Tejun Heo [Wed, 15 Apr 2009 13:10:23 +0000 (22:10 +0900)]
scatterlist: make sure sg_miter_next() doesn't return 0 sized mappings

Impact: fix not-so-critical but annoying bug

sg_miter_next() returns 0 sized mapping if there is an zero sized sg
entry in the list or at the end of each iteration.  As the users
always check the ->length field, this bug shouldn't be critical other
than causing unnecessary iteration.

Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
15 years agopowerpc: Fix modular build of ide-pmac when mediabay is built in
Bartlomiej Zolnierkiewicz [Tue, 21 Apr 2009 09:04:37 +0000 (09:04 +0000)]
powerpc: Fix modular build of ide-pmac when mediabay is built in

Now that the powermac IDE host driver can be modular, we need to
export check_media_bay_by_base() and media_bay_set_ide_infos()
from drivers/macintosh/mediabay.c for it.

This fixes the following build error:

> CC [M]  drivers/ide/pmac.o
> drivers/ide/pmac.c: In function ‘pmac_ide_init_dev’:
> drivers/ide/pmac.c:955: error: implicit declaration of function
> ‘check_media_bay_by_base’
> drivers/ide/pmac.c: In function ‘pmac_ide_setup_device’:
> drivers/ide/pmac.c:1090: error: implicit declaration of function
> ‘media_bay_set_ide_infos’
> make[2]: *** [drivers/ide/pmac.o] Error 1
> make[1]: *** [drivers/ide] Error 2
> make: *** [drivers] Error 2

Reported-by: Subrata Modak <subrata@linux.vnet.ibm.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years agopowerpc/pasemi: Fix build error on UP
Geoff Levand [Fri, 17 Apr 2009 06:36:37 +0000 (06:36 +0000)]
powerpc/pasemi: Fix build error on UP

A non-SMP version of smp_send_stop() is now included in smp.h.
Remove the unneeded definition in the pasemi setup.c.

Fixes build errors like these when CONFIG_SMP=n:

  arch/powerpc/platforms/pasemi/setup.c:48: error: redefinition of ‘smp_send_stop’
  include/linux/smp.h:125: error: previous definition of 'smp_send_stop' was here

Reported-by: subrata@linux.vnet.ibm.com
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
15 years agopowerpc: Make macintosh/mediabay driver depend on CONFIG_BLOCK
Alexander Beregalov [Fri, 17 Apr 2009 00:15:13 +0000 (00:15 +0000)]
powerpc: Make macintosh/mediabay driver depend on CONFIG_BLOCK

Fixes this build error:

In file included from drivers/macintosh/mediabay.c:21:
include/linux/ide.h:605: error: field 'request_sense_rq' has incomplete type

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>