Linus Torvalds [Tue, 23 Jun 2015 00:59:09 +0000 (17:59 -0700)]
Merge branch 'x86-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 core updates from Ingo Molnar:
"There were so many changes in the x86/asm, x86/apic and x86/mm topics
in this cycle that the topical separation of -tip broke down somewhat -
so the result is a more traditional architecture pull request,
collected into the 'x86/core' topic.
The topics were still maintained separately as far as possible, so
bisectability and conceptual separation should still be pretty good -
but there were a handful of merge points to avoid excessive
dependencies (and conflicts) that would have been poorly tested in the
end.
The next cycle will hopefully be much more quiet (or at least will
have fewer dependencies).
The main changes in this cycle were:
* x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
Gleixner)
- This is the second and most intrusive part of changes to the x86
interrupt handling - full conversion to hierarchical interrupt
domains:
[IOAPIC domain] -----
|
[MSI domain] --------[Remapping domain] ----- [ Vector domain ]
| (optional) |
[HPET MSI domain] ----- |
|
[DMAR domain] -----------------------------
|
[Legacy domain] -----------------------------
This now reflects the actual hardware and allowed us to distangle
the domain specific code from the underlying parent domain, which
can be optional in the case of interrupt remapping. It's a clear
separation of functionality and removes quite some duct tape
constructs which plugged the remap code between ioapic/msi/hpet
and the vector management.
- Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
injection into guests (Feng Wu)
* x86/asm changes:
- Tons of cleanups and small speedups, micro-optimizations. This
is in preparation to move a good chunk of the low level entry
code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
Brian Gerst)
- Moved all system entry related code to a new home under
arch/x86/entry/ (Ingo Molnar)
- Removal of the fragile and ugly CFI dwarf debuginfo annotations.
Conversion to C will reintroduce many of them - but meanwhile
they are only getting in the way, and the upstream kernel does
not rely on them (Ingo Molnar)
- NOP handling refinements. (Borislav Petkov)
* x86/mm changes:
- Big PAT and MTRR rework: making the code more robust and
preparing to phase out exposing direct MTRR interfaces to drivers -
in favor of using PAT driven interfaces (Toshi Kani, Luis R
Rodriguez, Borislav Petkov)
- New ioremap_wt()/set_memory_wt() interfaces to support
Write-Through cached memory mappings. This is especially
important for good performance on NVDIMM hardware (Toshi Kani)
* x86/ras changes:
- Add support for deferred errors on AMD (Aravind Gopalakrishnan)
This is an important RAS feature which adds hardware support for
poisoned data. That means roughly that the hardware marks data
which it has detected as corrupted but wasn't able to correct, as
poisoned data and raises an APIC interrupt to signal that in the
form of a deferred error. It is the OS's responsibility then to
take proper recovery action and thus prolonge system lifetime as
far as possible.
- Add support for Intel "Local MCE"s: upcoming CPUs will support
CPU-local MCE interrupts, as opposed to the traditional system-
wide broadcasted MCE interrupts (Ashok Raj)
- Misc cleanups (Borislav Petkov)
* x86/platform changes:
- Intel Atom SoC updates
... and lots of other cleanups, fixlets and other changes - see the
shortlog and the Git log for details"
* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
x86/hpet: Use proper hpet device number for MSI allocation
x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
genirq: Prevent crash in irq_move_irq()
genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
iommu, x86: Properly handle posted interrupts for IOMMU hotplug
iommu, x86: Provide irq_remapping_cap() interface
iommu, x86: Setup Posted-Interrupts capability for Intel iommu
iommu, x86: Add cap_pi_support() to detect VT-d PI capability
iommu, x86: Avoid migrating VT-d posted interrupts
iommu, x86: Save the mode (posted or remapped) of an IRTE
iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
iommu: dmar: Provide helper to copy shared irte fields
iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
iommu: Add new member capability to struct irq_remap_ops
x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
...
Linus Torvalds [Tue, 23 Jun 2015 00:51:59 +0000 (17:51 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 warning fixlet from Ingo Molnar:
"A build fix for certain (rare) variants of binutils that did not make
it into v4.1"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Fix overflow warning with 32-bit binutils
Linus Torvalds [Tue, 23 Jun 2015 00:46:14 +0000 (17:46 -0700)]
Merge branch 'x86-microcode-for-linus' of git://git./linux/kernel/git/tip/tip
Pul x86 microcode updates from Ingo Molnar:
"x86 microcode loader updates from Borislav Petkov:
- early parsing of the built-in microcode
- cleanups
- misc smaller fixes"
* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Correct CPU family related variable types
x86/microcode: Disable builtin microcode loading on 32-bit for now
x86/microcode/intel: Rename get_matching_sig()
x86/microcode/intel: Simplify get_matching_sig()
x86/microcode/intel: Simplify update_match_cpu()
x86/microcode/intel: Rename get_matching_microcode
x86/cpu/microcode: Zap changelog
x86/microcode: Parse built-in microcode early
x86/microcode/intel: Remove unused @rev arg of get_matching_sig()
x86/microcode/intel: Get rid of revision_is_newer()
Linus Torvalds [Tue, 23 Jun 2015 00:40:55 +0000 (17:40 -0700)]
Merge branch 'x86-kdump-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 kdump updates from Ingo Molnar:
"Three kdump robustness related improvements (Joerg Roedel)"
* 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/crash: Allocate enough low memory when crashkernel=high
x86/swiotlb: Try coherent allocations with __GFP_NOWARN
swiotlb: Warn on allocation failure in swiotlb_alloc_coherent()
Linus Torvalds [Tue, 23 Jun 2015 00:16:11 +0000 (17:16 -0700)]
Merge branch 'x86-fpu-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 FPU updates from Ingo Molnar:
"This tree contains two main changes:
- The big FPU code rewrite: wide reaching cleanups and reorganization
that pulls all the FPU code together into a clean base in
arch/x86/fpu/.
The resulting code is leaner and faster, and much easier to
understand. This enables future work to further simplify the FPU
code (such as removing lazy FPU restores).
By its nature these changes have a substantial regression risk: FPU
code related bugs are long lived, because races are often subtle
and bugs mask as user-space failures that are difficult to track
back to kernel side backs. I'm aware of no unfixed (or even
suspected) FPU related regression so far.
- MPX support rework/fixes. As this is still not a released CPU
feature, there were some buglets in the code - should be much more
robust now (Dave Hansen)"
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (250 commits)
x86/fpu: Fix double-increment in setup_xstate_features()
x86/mpx: Allow 32-bit binaries on 64-bit kernels again
x86/mpx: Do not count MPX VMAs as neighbors when unmapping
x86/mpx: Rewrite the unmap code
x86/mpx: Support 32-bit binaries on 64-bit kernels
x86/mpx: Use 32-bit-only cmpxchg() for 32-bit apps
x86/mpx: Introduce new 'directory entry' to 'addr' helper function
x86/mpx: Add temporary variable to reduce masking
x86: Make is_64bit_mm() widely available
x86/mpx: Trace allocation of new bounds tables
x86/mpx: Trace the attempts to find bounds tables
x86/mpx: Trace entry to bounds exception paths
x86/mpx: Trace #BR exceptions
x86/mpx: Introduce a boot-time disable flag
x86/mpx: Restrict the mmap() size check to bounds tables
x86/mpx: Remove redundant MPX_BNDCFG_ADDR_MASK
x86/mpx: Clean up the code by not passing a task pointer around when unnecessary
x86/mpx: Use the new get_xsave_field_ptr()API
x86/fpu/xstate: Wrap get_xsave_addr() to make it safer
x86/fpu/xstate: Fix up bad get_xsave_addr() assumptions
...
Linus Torvalds [Tue, 23 Jun 2015 00:10:44 +0000 (17:10 -0700)]
Merge branch 'x86-efi-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 EFI updates from Ingo Molnar:
"EFI changes:
- Use idiomatic negative error values in efivar_create_sysfs_entry()
instead of returning '1' to indicate error (Dan Carpenter)
- Implement new support to expose the EFI System Resource Tables in
sysfs, which provides information for performing firmware updates
(Peter Jones)
- Documentation cleanup in the EFI handover protocol section which
falsely claimed that 'cmdline_size' needed to be filled out by the
boot loader (Alex Smith)
- Align the order of SMBIOS tables in /sys/firmware/efi/systab to
match the way that we do things for ACPI and add documentation to
Documentation/ABI (Jean Delvare)"
* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Work around ia64 build problem with ESRT driver
efi: Add 'systab' information to Documentation/ABI
efi: dmi: List SMBIOS3 table before SMBIOS table
efi/esrt: Fix some compiler warnings
x86, doc: Remove cmdline_size from list of fields to be filled in for EFI handover
efi: Add esrt support
efi: efivar_create_sysfs_entry() should return negative error codes
Linus Torvalds [Tue, 23 Jun 2015 00:09:32 +0000 (17:09 -0700)]
Merge branch 'x86-debug-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 debugging documentation updates from Ingo Molnar:
"Documentation updates about x86 kernel stacks"
* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/Documentation: Adapt Ingo's explanation on printing backtraces
x86/Documentation: Remove STACKFAULT_STACK bulletpoint
x86/Documentation: Move kernel-stacks doc one level up
Linus Torvalds [Mon, 22 Jun 2015 23:43:01 +0000 (16:43 -0700)]
Merge branch 'x86-cpu-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 CPU features from Ingo Molnar:
"Various CPU feature support related changes: in particular the
/proc/cpuinfo model name sanitization change should be monitored, it
has a chance to break stuff. (but really shouldn't and there are no
regression reports)"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/amd: Give access to the number of nodes in a physical package
x86/cpu: Trim model ID whitespace
x86/cpu: Strip any /proc/cpuinfo model name field whitespace
x86/cpu/amd: Set X86_FEATURE_EXTD_APICID for future processors
x86/gart: Check for GART support before accessing GART registers
Linus Torvalds [Mon, 22 Jun 2015 23:23:00 +0000 (16:23 -0700)]
Merge branch 'x86-cleanups-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Misc cleanups"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Clean up types in xlate_dev_mem_ptr() some more
x86: Deinline dma_free_attrs()
x86: Deinline dma_alloc_attrs()
x86: Remove unused TI_cpu
x86: Merge common 32-bit values in asm-offsets.c
Linus Torvalds [Mon, 22 Jun 2015 22:52:04 +0000 (15:52 -0700)]
Merge branch 'sched-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes are:
- lockless wakeup support for futexes and IPC message queues
(Davidlohr Bueso, Peter Zijlstra)
- Replace spinlocks with atomics in thread_group_cputimer(), to
improve scalability (Jason Low)
- NUMA balancing improvements (Rik van Riel)
- SCHED_DEADLINE improvements (Wanpeng Li)
- clean up and reorganize preemption helpers (Frederic Weisbecker)
- decouple page fault disabling machinery from the preemption
counter, to improve debuggability and robustness (David
Hildenbrand)
- SCHED_DEADLINE documentation updates (Luca Abeni)
- topology CPU masks cleanups (Bartosz Golaszewski)
- /proc/sched_debug improvements (Srikar Dronamraju)"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits)
sched/deadline: Remove needless parameter in dl_runtime_exceeded()
sched: Remove superfluous resetting of the p->dl_throttled flag
sched/deadline: Drop duplicate init_sched_dl_class() declaration
sched/deadline: Reduce rq lock contention by eliminating locking of non-feasible target
sched/deadline: Make init_sched_dl_class() __init
sched/deadline: Optimize pull_dl_task()
sched/preempt: Add static_key() to preempt_notifiers
sched/preempt: Fix preempt notifiers documentation about hlist_del() within unsafe iteration
sched/stop_machine: Fix deadlock between multiple stop_two_cpus()
sched/debug: Add sum_sleep_runtime to /proc/<pid>/sched
sched/debug: Replace vruntime with wait_sum in /proc/sched_debug
sched/debug: Properly format runnable tasks in /proc/sched_debug
sched/numa: Only consider less busy nodes as numa balancing destinations
Revert
095bebf61a46 ("sched/numa: Do not move past the balance point if unbalanced")
sched/fair: Prevent throttling in early pick_next_task_fair()
preempt: Reorganize the notrace definitions a bit
preempt: Use preempt_schedule_context() as the official tracing preemption point
sched: Make preempt_schedule_context() function-tracing safe
x86: Remove cpu_sibling_mask() and cpu_core_mask()
x86: Replace cpu_**_mask() with topology_**_cpumask()
...
Linus Torvalds [Mon, 22 Jun 2015 22:45:41 +0000 (15:45 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"These are the left over fixes from the v4.1 cycle"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf tools: Fix build breakage if prefix= is specified
perf/x86: Honor the architectural performance monitoring version
perf/x86/intel: Fix PMI handling for Intel PT
perf/x86/intel/bts: Fix DS area sharing with x86_pmu events
perf/x86: Add more Broadwell model numbers
perf: Fix ring_buffer_attach() RCU sync, again
Linus Torvalds [Mon, 22 Jun 2015 22:19:21 +0000 (15:19 -0700)]
Merge branch 'perf-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Kernel side changes mostly consist of work on x86 PMU drivers:
- x86 Intel PT (hardware CPU tracer) improvements (Alexander
Shishkin)
- x86 Intel CQM (cache quality monitoring) improvements (Thomas
Gleixner)
- x86 Intel PEBSv3 support (Peter Zijlstra)
- x86 Intel PEBS interrupt batching support for lower overhead
sampling (Zheng Yan, Kan Liang)
- x86 PMU scheduler fixes and improvements (Peter Zijlstra)
There's too many tooling improvements to list them all - here are a
few select highlights:
'perf bench':
- Introduce new 'perf bench futex' benchmark: 'wake-parallel', to
measure parallel waker threads generating contention for kernel
locks (hb->lock). (Davidlohr Bueso)
'perf top', 'perf report':
- Allow disabling/enabling events dynamicaly in 'perf top':
a 'perf top' session can instantly become a 'perf report'
one, i.e. going from dynamic analysis to a static one,
returning to a dynamic one is possible, to toogle the
modes, just press 'f' to 'freeze/unfreeze' the sampling. (Arnaldo Carvalho de Melo)
- Make Ctrl-C stop processing on TUI, allowing interrupting the load of big
perf.data files (Namhyung Kim)
'perf probe': (Masami Hiramatsu)
- Support glob wildcards for function name
- Support $params special probe argument: Collect all function arguments
- Make --line checks validate C-style function name.
- Add --no-inlines option to avoid searching inline functions
- Greatly speed up 'perf probe --list' by caching debuginfo.
- Improve --filter support for 'perf probe', allowing using its arguments
on other commands, as --add, --del, etc.
'perf sched':
- Add option in 'perf sched' to merge like comms to lat output (Josef Bacik)
Plus tons of infrastructure work - in particular preparation for
upcoming threaded perf report support, but also lots of other work -
and fixes and other improvements. See (much) more details in the
shortlog and in the git log"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (305 commits)
perf tools: Configurable per thread proc map processing time out
perf tools: Add time out to force stop proc map processing
perf report: Fix sort__sym_cmp to also compare end of symbol
perf hists browser: React to unassigned hotkey pressing
perf top: Tell the user how to unfreeze events after pressing 'f'
perf hists browser: Honour the help line provided by builtin-{top,report}.c
perf hists browser: Do not exit when 'f' is pressed in 'report' mode
perf top: Replace CTRL+z with 'f' as hotkey for enable/disable events
perf annotate: Rename source_line_percent to source_line_samples
perf annotate: Display total number of samples with --show-total-period
perf tools: Ensure thread-stack is flushed
perf top: Allow disabling/enabling events dynamicly
perf evlist: Add toggle_enable() method
perf trace: Fix race condition at the end of started workloads
perf probe: Speed up perf probe --list by caching debuginfo
perf probe: Show usage even if the last event is skipped
perf tools: Move libtraceevent dynamic list to separated LDFLAGS variable
perf tools: Fix a problem when opening old perf.data with different byte order
perf tools: Ignore .config-detected in .gitignore
perf probe: Fix to return error if no probe is added
...
Linus Torvalds [Mon, 22 Jun 2015 21:54:22 +0000 (14:54 -0700)]
Merge branch 'locking-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The main changes are:
- 'qspinlock' support, enabled on x86: queued spinlocks - these are
now the spinlock variant used by x86 as they outperform ticket
spinlocks in every category. (Waiman Long)
- 'pvqspinlock' support on x86: paravirtualized variant of queued
spinlocks. (Waiman Long, Peter Zijlstra)
- 'qrwlock' support, enabled on x86: queued rwlocks. Similar to
queued spinlocks, they are now the variant used by x86:
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
- various lockdep fixlets
- various locking primitives cleanups, further WRITE_ONCE()
propagation"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
locking/lockdep: Remove hard coded array size dependency
locking/qrwlock: Don't contend with readers when setting _QW_WAITING
lockdep: Do not break user-visible string
locking/arch: Rename set_mb() to smp_store_mb()
locking/arch: Add WRITE_ONCE() to set_mb()
rtmutex: Warn if trylock is called from hard/softirq context
arch: Remove __ARCH_HAVE_CMPXCHG
locking/rtmutex: Drop usage of __HAVE_ARCH_CMPXCHG
locking/qrwlock: Rename QUEUE_RWLOCK to QUEUED_RWLOCKS
locking/pvqspinlock: Rename QUEUED_SPINLOCK to QUEUED_SPINLOCKS
locking/pvqspinlock: Replace xchg() by the more descriptive set_mb()
locking/pvqspinlock, x86: Enable PV qspinlock for Xen
locking/pvqspinlock, x86: Enable PV qspinlock for KVM
locking/pvqspinlock, x86: Implement the paravirt qspinlock call patching
locking/pvqspinlock: Implement simple paravirt support for the qspinlock
locking/qspinlock: Revert to test-and-set on hypervisors
locking/qspinlock: Use a simple write to grab the lock
locking/qspinlock: Optimize for smaller NR_CPUS
locking/qspinlock: Extract out code snippets for the next patch
locking/qspinlock: Add pending bit
...
Linus Torvalds [Mon, 22 Jun 2015 21:01:01 +0000 (14:01 -0700)]
Merge branch 'core-rcu-for-linus' of git://git./linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
- Continued initialization/Kconfig updates: hide most Kconfig options
from unsuspecting users.
There's now a single high level configuration option:
*
* RCU Subsystem
*
Make expert-level adjustments to RCU configuration (RCU_EXPERT) [N/y/?] (NEW)
Which if answered in the negative, leaves us with a single
interactive configuration option:
Offload RCU callback processing from boot-selected CPUs (RCU_NOCB_CPU) [N/y/?] (NEW)
All the rest of the RCU options are configured automatically. Later
on we'll remove this single leftover configuration option as well.
- Remove all uses of RCU-protected array indexes: replace the
rcu_[access|dereference]_index_check() APIs with READ_ONCE() and
rcu_lockdep_assert()
- RCU CPU-hotplug cleanups
- Updates to Tiny RCU: a race fix and further code shrinkage.
- RCU torture-testing updates: fixes, speedups, cleanups and
documentation updates.
- Miscellaneous fixes
- Documentation updates
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
rcutorture: Allow repetition factors in Kconfig-fragment lists
rcutorture: Display "make oldconfig" errors
rcutorture: Update TREE_RCU-kconfig.txt
rcutorture: Make rcutorture scripts force RCU_EXPERT
rcutorture: Update configuration fragments for rcutree.rcu_fanout_exact
rcutorture: TASKS_RCU set directly, so don't explicitly set it
rcutorture: Test SRCU cleanup code path
rcutorture: Replace barriers with smp_store_release() and smp_load_acquire()
locktorture: Change longdelay_us to longdelay_ms
rcutorture: Allow negative values of nreaders to oversubscribe
rcutorture: Exchange TREE03 and TREE08 NR_CPUS, speed up CPU hotplug
rcutorture: Exchange TREE03 and TREE04 geometries
locktorture: fix deadlock in 'rw_lock_irq' type
rcu: Correctly handle non-empty Tiny RCU callback list with none ready
rcutorture: Test both RCU-sched and RCU-bh for Tiny RCU
rcu: Further shrink Tiny RCU by making empty functions static inlines
rcu: Conditionally compile RCU's eqs warnings
rcu: Remove prompt for RCU implementation
rcu: Make RCU able to tolerate undefined CONFIG_RCU_KTHREAD_PRIO
rcu: Make RCU able to tolerate undefined CONFIG_RCU_FANOUT_LEAF
...
Linus Torvalds [Mon, 22 Jun 2015 19:51:21 +0000 (12:51 -0700)]
Merge branch 'for-linus-1' of git://git./linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
"In this pile: pathname resolution rewrite.
- recursion in link_path_walk() is gone.
- nesting limits on symlinks are gone (the only limit remaining is
that the total amount of symlinks is no more than 40, no matter how
nested).
- "fast" (inline) symlinks are handled without leaving rcuwalk mode.
- stack footprint (independent of the nesting) is below kilobyte now,
about on par with what it used to be with one level of nested
symlinks and ~2.8 times lower than it used to be in the worst case.
- struct nameidata is entirely private to fs/namei.c now (not even
opaque pointers are being passed around).
- ->follow_link() and ->put_link() calling conventions had been
changed; all in-tree filesystems converted, out-of-tree should be
able to follow reasonably easily.
For out-of-tree conversions, see Documentation/filesystems/porting
for details (and in-tree filesystems for examples of conversion).
That has sat in -next since mid-May, seems to survive all testing
without regressions and merges clean with v4.1"
* 'for-linus-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (131 commits)
turn user_{path_at,path,lpath,path_dir}() into static inlines
namei: move saved_nd pointer into struct nameidata
inline user_path_create()
inline user_path_parent()
namei: trim do_last() arguments
namei: stash dfd and name into nameidata
namei: fold path_cleanup() into terminate_walk()
namei: saner calling conventions for filename_parentat()
namei: saner calling conventions for filename_create()
namei: shift nameidata down into filename_parentat()
namei: make filename_lookup() reject ERR_PTR() passed as name
namei: shift nameidata inside filename_lookup()
namei: move putname() call into filename_lookup()
namei: pass the struct path to store the result down into path_lookupat()
namei: uninline set_root{,_rcu}()
namei: be careful with mountpoint crossings in follow_dotdot_rcu()
Documentation: remove outdated information from automount-support.txt
get rid of assorted nameidata-related debris
lustre: kill unused helper
lustre: kill unused macro (LOOKUP_CONTINUE)
...
Ingo Molnar [Mon, 22 Jun 2015 07:15:03 +0000 (09:15 +0200)]
Merge branches 'x86/apic', 'x86/asm', 'x86/mm' and 'x86/platform' into x86/core, to merge last updates
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Mon, 22 Jun 2015 05:05:43 +0000 (22:05 -0700)]
Linux 4.1
Thomas Gleixner [Sun, 21 Jun 2015 14:21:50 +0000 (16:21 +0200)]
x86/hpet: Use proper hpet device number for MSI allocation
hpet_assign_irq() is called with hpet_device->num as "hardware
interrupt number", but hpet_device->num is initialized after the
interrupt has been assigned, so it's always 0. As a consequence only
the first MSI allocation succeeds, the following ones fail because the
"hardware interrupt number" already exists.
Move the initialization of dev->num and other fields before the call
to hpet_assign_irq(), which is the ordering before the offending
commit which introduced that regression.
Fixes: "
3cb96f0c9733 x86/hpet: Enhance HPET IRQ to support hierarchical irqdomains"
Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1506211635010.4107@nanos
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Linus Torvalds [Sun, 21 Jun 2015 00:26:01 +0000 (17:26 -0700)]
Merge git://git./linux/kernel/git/nab/target-pending
Pull scsi target fixes from Nicholas Bellinger:
"Apologies for the late pull request.
Here are the outstanding target-pending fixes for v4.1 code.
The series contains three patches from Sagi + Co that address a few
iser-target issues that have been uncovered during recent testing at
Mellanox.
Patch #1 has a v3.16+ stable tag, and #2-3 have v3.10+ stable tags"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
iser-target: Fix possible use-after-free
iser-target: release stale iser connections
iser-target: Fix variable-length response error completion
Linus Torvalds [Sat, 20 Jun 2015 20:54:22 +0000 (13:54 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A smattering of fixes,
mgag200:
don't accept modes that aren't aligned properly as hw can't do it
i915:
two regression fixes
radeon:
one query to allow userspace fixes
one oops fixer for older hw with new options enabled"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: don't probe MST on hw we don't support it on
drm/radeon: Add RADEON_INFO_VA_UNMAP_WORKING query
drm/mgag200: Reject non-character-cell-aligned mode widths
Revert "drm/i915: Don't skip request retirement if the active list is empty"
drm/i915: Always reset vma->ggtt_view.pages cache on unbinding
Jiang Liu [Sat, 20 Jun 2015 09:50:50 +0000 (11:50 +0200)]
x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
irq == 0 is not a valid irq for a irqdomain MSI allocation, but hpet
code checks only for negative return values.
Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/558447AF.30703@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ingo Molnar [Fri, 19 Jun 2015 23:11:11 +0000 (01:11 +0200)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Replace CTRL+z with 'f' as hotkey for enable/disable events (Arnaldo Carvalho de Melo)
- Do not exit when 'f' is pressed in 'report' mode (Arnaldo Carvalho de Melo)
- Tell the user how to unfreeze events after pressing 'f' in 'perf top' (Arnaldo Carvalho de Melo)
- React to unassigned hotkey pressing in 'top/report' (Arnaldo Carvalho de Melo)
- Display total number of samples with --show-total-period in 'annotate' (Martin Liška)
- Add timeout to make procfs mmap processing more robust (Kan Liang)
- Fix sort__sym_cmp to also compare end of symbol (Yannick Brosseau)
Infrastructure changes:
- Ensure thread-stack is flushed (Adrian Hunter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Fri, 19 Jun 2015 23:07:02 +0000 (01:07 +0200)]
Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fix from Arnaldo Carvalho de Melo:
- Fix build breakage if prefix= is specified, this introduced
a regression for a build idiom used by the Debian "linux-tools"
package, that does:
MAKE_PERF := $(MAKE) prefix=/usr V=1 ARCH=$(KERNEL_ARCH_PERF) ...
Fix it. (Lukas Wunner)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Kan Liang [Wed, 17 Jun 2015 13:51:11 +0000 (09:51 -0400)]
perf tools: Configurable per thread proc map processing time out
The time out to limit the individual proc map processing was hard code
to 500ms. This patch introduce a new option --proc-map-timeout to make
the time limit configurable.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ying Huang <ying.huang@intel.com>
Link: http://lkml.kernel.org/r/1434549071-25611-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kan Liang [Wed, 17 Jun 2015 13:51:10 +0000 (09:51 -0400)]
perf tools: Add time out to force stop proc map processing
System wide sampling like 'perf top' or 'perf record -a' read all
threads /proc/xxx/maps before sampling. If there are any threads which
generating a keeping growing huge maps, perf will do infinite loop
during synthesizing. Nothing will be sampled.
This patch fixes this issue by adding per-thread timeout to force stop
this kind of endless proc map processing.
PERF_RECORD_MISC_PROC_MAP_PARSE_TIME_OUT is introduced to indicate that
the mmap record are truncated by time out. User will get warning
notification when truncated mmap records are detected.
Reported-by: Ying Huang <ying.huang@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ying Huang <ying.huang@intel.com>
Link: http://lkml.kernel.org/r/1434549071-25611-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Yannick Brosseau [Wed, 17 Jun 2015 23:41:10 +0000 (16:41 -0700)]
perf report: Fix sort__sym_cmp to also compare end of symbol
When using a map file from a JIT, due to memory reuse, we can obtain
multiple symbols with the same start address but a different length.
The symbols__find does check for the end so not doing it in
sort__sym_cmp was causing the hist_entry in the annotate part of a
report to match to the wrong entry, causing a fatal error.
Signed-off-by: Yannick Brosseau <scientist@fb.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/1434584470-17771-1-git-send-email-scientist@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 19 Jun 2015 20:49:29 +0000 (17:49 -0300)]
perf hists browser: React to unassigned hotkey pressing
When that happens we were just ignoring the key press, now this
message is presented in the bottom line (the help line):
"Press '?' for help on key bindings"
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-iyma2j5kj3q9i1stl4mfh90n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 19 Jun 2015 20:35:25 +0000 (17:35 -0300)]
perf top: Tell the user how to unfreeze events after pressing 'f'
When the user presses 'f' to disable events the visual cues are, well,
the percentages not changing and the number of events freezing.
Be more explicit by changing the help line at the bottom of the screen
to show the following messages when 'f' is pressed:
"Press 'f' again to re-enable the events"
And then, when 'f' is pressed again:
"Press 'f' to disable the events or 'h'
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-uhiswg9a9rxm5gxg7ptjskjn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 19 Jun 2015 20:30:20 +0000 (17:30 -0300)]
perf hists browser: Honour the help line provided by builtin-{top,report}.c
The hists_browser was replacing whatever helpline provided by 'top' or
'report' with a static "Press '?' for help on key bindings", fix it.
Now the message passed by top appears at the bottom of the screen:
"For a higher level overview, try: perf top --sort comm,dso"
As well the message that will be added when the user presses 'f' to
disable the events, something along the lines of "press f again to
re-enable...".
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-dacaja70mbfz3a0yj1n180gx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 19 Jun 2015 19:59:43 +0000 (16:59 -0300)]
perf hists browser: Do not exit when 'f' is pressed in 'report' mode
The 'f' hotkey is only used when in 'top', dynamic mode, to
enable/disable events, currently not making sense in the 'report',
static mode, where we can't go from showing the histogram entries
created from a perf.data file to adding more events after recreating the
evlist created from the perf.data file, albeit possible, this is not
implemented right now.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-lholzf472pu98dkkijggwx2m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 19 Jun 2015 19:56:04 +0000 (16:56 -0300)]
perf top: Replace CTRL+z with 'f' as hotkey for enable/disable events
I.e. 'freeze'/'unfreeze', this is because CTRL+z has a well known
action, i.e. suspend the app, perf needs to follow that convention, that
will be done on a separate patch, tho.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-oedcl6ovohara4koig14ayip@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Lukas Wunner [Thu, 18 Jun 2015 11:00:32 +0000 (13:00 +0200)]
perf tools: Fix build breakage if prefix= is specified
Invoking Makefile.perf with prefix= breaks the build since Makefile.perf
hands that variable down to Makefile.build where it overrides
prefix := $(subst ./,,$(OUTPUT)$(dir)/)
leading to errors like this:
No rule to make target '/usrabspath.o', needed by '/usrlibperf-in.o'
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Fixes:
c819e2cf2eb6f65d3208d195d7a0edef6108d5
Link: http://lkml.kernel.org/r/5582c48a.84a22b0a.a918.5285SMTPIN_ADDED_MISSING@mx.google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 19 Jun 2015 19:36:12 +0000 (16:36 -0300)]
perf annotate: Rename source_line_percent to source_line_samples
To better reflect the purpose of this struct, that is to hold
info about samples, its total number and is percentage.
Cc: Martin Liska <mliska@suse.cz>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-6bf8gwcl975uurl0ttpvtk69@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Martin Liška [Fri, 19 Jun 2015 19:10:43 +0000 (16:10 -0300)]
perf annotate: Display total number of samples with --show-total-period
To compare two records on an instruction base, with --show-total-period
option provided, display total number of samples that belong to a line
in assembly language.
New hot key 't' is introduced for 'perf annotate' TUI.
Signed-off-by: Martin Liska <mliska@suse.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/5583E26D.1040407@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 29 May 2015 13:33:30 +0000 (16:33 +0300)]
perf tools: Ensure thread-stack is flushed
The thread-stack represents a thread's current stack. When a thread
exits there can still be many functions on the stack e.g. exit() can be
called many levels deep, so all the callers will never return. To get
that information output, the thread-stack must be flushed.
Previously it was assumed the thread-stack would be flushed when the
struct thread was deleted. With thread ref-counting it is no longer
clear when that will be, if ever. So instead explicitly flush all the
thread-stacks at the end of a session.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1432906425-9911-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Fri, 19 Jun 2015 17:36:50 +0000 (07:36 -1000)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fixes from Michael Turquette:
"Very late clk regression fixes for the ARM-based AT91 platform.
These went unnoticed by me until recently, hence the late pull
request"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: at91: fix h32mx prototype inclusion in pmc header
clk: at91: trivial: typo in peripheral clock description
clk: at91: fix PERIPHERAL_MAX_SHIFT definition
clk: at91: pll: fix input range validity check
Linus Torvalds [Fri, 19 Jun 2015 17:34:14 +0000 (07:34 -1000)]
Merge tag 'sound-4.1' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Nothing looks scary, just a few usual HD-audio regression fixes and
fixup, in addition to a minor Kconfig dependency fix for the old MIPS
drivers"
* tag 'sound-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix unused label skip_i915
ALSA: hda - Fix noisy outputs on Dell XPS13 (2015 model)
ALSA: mips: let SND_SGI_O2 select SND_PCM
ALSA: hda - Fix audio crackles on Dell Latitude E7x40
ALSA: hda - adding a DAC/pin preference map for a HP Envy TS machine
Michael Turquette [Fri, 19 Jun 2015 14:37:14 +0000 (07:37 -0700)]
Merge branch 'ccf/atmel-fixes-for-4.1' of https://github.com/bbrezillon/linux-at91 into clk-fixes
Borislav Petkov [Fri, 19 Jun 2015 11:49:06 +0000 (13:49 +0200)]
x86/boot: Fix overflow warning with 32-bit binutils
When building the kernel with 32-bit binutils built with support
only for the i386 target, we get the following warning:
arch/x86/kernel/head_32.S:66: Warning: shift count out of range (32 is not between 0 and 31)
The problem is that in that case, binutils' internal type
representation is 32-bit wide and the shift range overflows.
In order to fix this, manipulate the shift expression which
creates the 4GiB constant to not overflow the shift count.
Suggested-by: Michael Matz <matz@suse.de>
Reported-and-tested-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Nicolas Ferre [Thu, 28 May 2015 13:07:21 +0000 (15:07 +0200)]
clk: at91: fix h32mx prototype inclusion in pmc header
Trivial fix that prevents to compile this pmc clock driver if h32mx clock is
present but smd clock isn't.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Fixes:
bcc5fd49a0fd ("clk: at91: add a driver for the h32mx clock")
Cc: <stable@vger.kernel.org> # 3.18+
Nicolas Ferre [Wed, 17 Jun 2015 13:22:51 +0000 (15:22 +0200)]
clk: at91: trivial: typo in peripheral clock description
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Boris Brezillon [Thu, 28 May 2015 12:01:08 +0000 (14:01 +0200)]
clk: at91: fix PERIPHERAL_MAX_SHIFT definition
Fix the PERIPHERAL_MAX_SHIFT definition (3 instead of 4) and adapt the
round_rate and set_rate logic accordingly.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: "Wu, Songjun" <Songjun.Wu@atmel.com>
Boris Brezillon [Fri, 27 Mar 2015 22:53:15 +0000 (23:53 +0100)]
clk: at91: pll: fix input range validity check
The PLL impose a certain input range to work correctly, but it appears that
this input range does not apply on the input clock (or parent clock) but
on the input clock after it has passed the PLL divisor.
Fix the implementation accordingly.
Cc: <stable@vger.kernel.org> # v3.14+
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: Jonas Andersson <jonas@microbit.se>
Zhiqiang Zhang [Mon, 15 Jun 2015 03:15:20 +0000 (11:15 +0800)]
sched/deadline: Remove needless parameter in dl_runtime_exceeded()
Sine commit
269ad8015a6b ("sched/deadline: Avoid double-accounting in
case of missed deadlines), parameter 'rq' is no longer used, so
remove it.
Signed-off-by: Zhiqiang Zhang <zhangzhiqiang.zhang@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <juri.lelli@gmail.com>
Cc: <luca.abeni@unitn.it>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1434338120-43773-1-git-send-email-zhangzhiqiang.zhang@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Wanpeng Li [Wed, 13 May 2015 06:01:06 +0000 (14:01 +0800)]
sched: Remove superfluous resetting of the p->dl_throttled flag
Resetting the p->dl_throttled flag in rt_mutex_setprio() (for a task that is going
to be boosted) is superfluous, as the natural place to do so is in
replenish_dl_entity().
If the task was on the runqueue and it is boosted by a DL task, it will be enqueued
back with ENQUEUE_REPLENISH flag set, which can guarantee that dl_throttled is
reset in replenish_dl_entity().
This patch drops the resetting of throttled status in function rt_mutex_setprio().
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1431496867-4194-6-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Wanpeng Li [Wed, 13 May 2015 06:01:05 +0000 (14:01 +0800)]
sched/deadline: Drop duplicate init_sched_dl_class() declaration
There are two init_sched_dl_class() declarations, this patch drops
the duplicate.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1431496867-4194-5-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Wanpeng Li [Wed, 13 May 2015 06:01:03 +0000 (14:01 +0800)]
sched/deadline: Reduce rq lock contention by eliminating locking of non-feasible target
This patch adds a check that prevents futile attempts to move DL tasks
to a CPU with active tasks of equal or earlier deadline. The same
behavior as commit
80e3d87b2c55 ("sched/rt: Reduce rq lock contention
by eliminating locking of non-feasible target") for rt class.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1431496867-4194-3-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Wanpeng Li [Wed, 13 May 2015 06:01:02 +0000 (14:01 +0800)]
sched/deadline: Make init_sched_dl_class() __init
It's a bootstrap function, make init_sched_dl_class() __init.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1431496867-4194-2-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Wanpeng Li [Wed, 13 May 2015 06:01:01 +0000 (14:01 +0800)]
sched/deadline: Optimize pull_dl_task()
pull_dl_task() uses pick_next_earliest_dl_task() to select a migration
candidate; this is sub-optimal since the next earliest task -- as per
the regular runqueue -- might not be migratable at all. This could
result in iterating the entire runqueue looking for a task.
Instead iterate the pushable queue -- this queue only contains tasks
that have at least 2 cpus set in their cpus_allowed mask.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
[ Improved the changelog. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1431496867-4194-1-git-send-email-wanpeng.li@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Mon, 8 Jun 2015 14:00:30 +0000 (16:00 +0200)]
sched/preempt: Add static_key() to preempt_notifiers
Avoid touching the curr->preempt_notifier cacheline when not needed.
Provides a small improvement on pipe-bench:
taskset 01 perf stat --repeat 10 -- perf bench sched pipe
before:
Performance counter stats for 'perf bench sched pipe' (10 runs):
12385.016204 task-clock (msec) # 1.001 CPUs utilized ( +- 0.34% )
2,000,023 context-switches # 0.161 M/sec ( +- 0.00% )
0 cpu-migrations # 0.000 K/sec
175 page-faults # 0.014 K/sec ( +- 0.26% )
41,376,162,250 cycles # 3.341 GHz ( +- 0.11% )
17,389,139,321 stalled-cycles-frontend # 42.03% frontend cycles idle ( +- 0.25% )
<not supported> stalled-cycles-backend
68,788,588,003 instructions # 1.66 insns per cycle
# 0.25 stalled cycles per insn ( +- 0.02% )
13,449,387,620 branches # 1085.940 M/sec ( +- 0.02% )
20,880,690 branch-misses # 0.16% of all branches ( +- 0.98% )
12.
372646094 seconds time elapsed ( +- 0.34% )
after:
Performance counter stats for 'perf bench sched pipe' (10 runs):
12180.936528 task-clock (msec) # 1.001 CPUs utilized ( +- 0.33% )
2,000,077 context-switches # 0.164 M/sec ( +- 0.00% )
0 cpu-migrations # 0.000 K/sec
174 page-faults # 0.014 K/sec ( +- 0.27% )
40,691,545,577 cycles # 3.341 GHz ( +- 0.06% )
16,446,333,371 stalled-cycles-frontend # 40.42% frontend cycles idle ( +- 0.18% )
<not supported> stalled-cycles-backend
68,570,100,387 instructions # 1.69 insns per cycle
# 0.24 stalled cycles per insn ( +- 0.01% )
13,389,740,014 branches # 1099.237 M/sec ( +- 0.01% )
20,175,440 branch-misses # 0.15% of all branches ( +- 0.52% )
12.
169253010 seconds time elapsed ( +- 0.33% )
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mathieu Desnoyers [Sun, 17 May 2015 16:53:10 +0000 (12:53 -0400)]
sched/preempt: Fix preempt notifiers documentation about hlist_del() within unsafe iteration
preempt_notifier_unregister() documents:
"This is safe to call from within a preemption notifier."
However, both fire_sched_in_preempt_notifiers() and
fire_sched_out_preempt_notifiers() are using hlist_for_each_entry(),
which is not safe against entry removal during iteration.
Inspection of the KVM code does not reveal any use of
preempt_notifier_unregister() within the preempt notifiers.
Therefore, fix the comment.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1431881590-1456-1-git-send-email-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Fri, 5 Jun 2015 15:30:23 +0000 (17:30 +0200)]
sched/stop_machine: Fix deadlock between multiple stop_two_cpus()
Jiri reported a machine stuck in multi_cpu_stop() with
migrate_swap_stop() as function and with the following src,dst cpu
pairs: {11, 4} {13, 11} { 4, 13}
4 11 13
cpuM: queue(4 ,13)
*Ma
cpuN: queue(13,11)
*N Na
*M Mb
cpuO: queue(11, 4)
*O Oa
*Nb
*Ob
Where *X denotes the cpu running the queueing of cpu-X and X[ab] denotes
the first/second queued work.
You'll observe the top of the workqueue for each cpu: 4,11,13 to be work
from cpus: M, O, N resp. IOW. deadlock.
Do away with the queueing trickery and introduce lg_double_lock() to
lock both CPUs and fully serialize the stop_two_cpus() callers instead
of the partial (and buggy) serialization we have now.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150605153023.GH19282@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Srikar Dronamraju [Mon, 8 Jun 2015 08:10:41 +0000 (13:40 +0530)]
sched/debug: Add sum_sleep_runtime to /proc/<pid>/sched
When CONFIG_SCHEDSTATS is enabled, /proc/<pid>/sched prints almost all
sched statistics except sum_sleep_runtime. Since sum_sleep_runtime is
a good info to collect, add this it to /proc/<pid>/sched.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1433751041-11724-4-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Srikar Dronamraju [Mon, 8 Jun 2015 08:10:40 +0000 (13:40 +0530)]
sched/debug: Replace vruntime with wait_sum in /proc/sched_debug
Within runnable tasks in /proc/sched_debug, vruntime is printed twice,
once as tree-key and again as exec-runtime.
Since exec-runtime isnt populated in !CONFIG_SCHEDSTATS, use this field
to print wait_sum.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1433751041-11724-3-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Srikar Dronamraju [Mon, 8 Jun 2015 08:10:39 +0000 (13:40 +0530)]
sched/debug: Properly format runnable tasks in /proc/sched_debug
With !CONFIG_SCHEDSTATS, runnable tasks in /proc/sched_debug has too
many columns than required. Fix this by printing appropriate columns.
While at this, print sum_exec_runtime, since this information is
available even in !CONFIG_SCHEDSTATS case.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1433751041-11724-2-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
George Beshers [Thu, 18 Jun 2015 15:25:13 +0000 (10:25 -0500)]
locking/lockdep: Remove hard coded array size dependency
An apparent oversight left a hardcoded '4' in place when
LOCKSTAT_POINTS was introduced.
The contention_point[] and contending_point[] arrays in the
structs lock_class and lock_class_stats need to be the same
size for the loops in lock_stats() to be correct.
This patch allows LOCKSTAT_POINTS to be changed without
affecting the correctness of the code.
Signed-off-by: George Beshers <gbeshers@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Waiman Long [Tue, 9 Jun 2015 15:19:13 +0000 (11:19 -0400)]
locking/qrwlock: Don't contend with readers when setting _QW_WAITING
The current cmpxchg() loop in setting the _QW_WAITING flag for writers
in queue_write_lock_slowpath() will contend with incoming readers
causing possibly extra cmpxchg() operations that are wasteful. This
patch changes the code to do a byte cmpxchg() to eliminate contention
with new readers.
A multithreaded microbenchmark running 5M read_lock/write_lock loop
on a 8-socket 80-core Westmere-EX machine running 4.0 based kernel
with the qspinlock patch have the following execution times (in ms)
with and without the patch:
With R:W ratio = 5:1
Threads w/o patch with patch % change
------- --------- ---------- --------
2 990 895 -9.6%
3 2136 1912 -10.5%
4 3166 2830 -10.6%
5 3953 3629 -8.2%
6 4628 4405 -4.8%
7 5344 5197 -2.8%
8 6065 6004 -1.0%
9 6826 6811 -0.2%
10 7599 7599 0.0%
15 9757 9766 +0.1%
20 13767 13817 +0.4%
With small number of contending threads, this patch can improve
locking performance by up to 10%. With more contending threads,
however, the gain diminishes.
Signed-off-by: Waiman Long <Waiman.Long@hp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1433863153-30722-3-git-send-email-Waiman.Long@hp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Palik, Imre [Mon, 8 Jun 2015 12:46:49 +0000 (14:46 +0200)]
perf/x86: Honor the architectural performance monitoring version
Architectural performance monitoring, version 1, doesn't support fixed counters.
Currently, even if a hypervisor advertises support for architectural
performance monitoring version 1, perf may still try to use the fixed
counters, as the constraints are set up based on the CPU model.
This patch ensures that perf honors the architectural performance monitoring
version returned by CPUID, and it only uses the fixed counters for version 2
and above.
(Some of the ideas in this patch came from Peter Zijlstra.)
Signed-off-by: Imre Palik <imrep@amazon.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1433767609-1039-1-git-send-email-imrep.amz@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Alexander Shishkin [Tue, 9 Jun 2015 10:03:26 +0000 (13:03 +0300)]
perf/x86/intel: Fix PMI handling for Intel PT
Intel PT is a separate PMU and it is not using any of the x86_pmu
code paths, which means in particular that the active_events counter
remains intact when new PT events are created.
However, PT uses the generic x86_pmu PMI handler for its PMI handling needs.
The problem here is that the latter checks active_events and in case of it
being zero, exits without calling the actual x86_pmu.handle_nmi(), which
results in unknown NMI errors and massive data loss for PT.
The effect is not visible if there are other perf events in the system
at the same time that keep active_events counter non-zero, for instance
if the NMI watchdog is running, so one needs to disable it to reproduce
the problem.
At the same time, the active_events counter besides doing what the name
suggests also implicitly serves as a PMC hardware and DS area reference
counter.
This patch adds a separate reference counter for the PMC hardware, leaving
active_events for actually counting the events and makes sure it also
counts PT and BTS events.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Link: http://lkml.kernel.org/r/87k2v92t0s.fsf@ashishki-desk.ger.corp.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Alexander Shishkin [Thu, 11 Jun 2015 12:13:56 +0000 (15:13 +0300)]
perf/x86/intel/bts: Fix DS area sharing with x86_pmu events
Currently, the intel_bts driver relies on the DS area allocated by the x86_pmu
code in its event_init() path, which is a bug: creating a BTS event while
no x86_pmu events are present results in a NULL pointer dereference.
The same DS area is also used by PEBS sampling, which makes it quite a bit
trickier to have a separate one for intel_bts' purposes.
This patch makes intel_bts driver use the same DS allocation and reference
counting code as x86_pmu to make sure it is always present when either
intel_bts or x86_pmu need it.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Link: http://lkml.kernel.org/r/1434024837-9916-2-git-send-email-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Andi Kleen [Thu, 11 Jun 2015 20:52:22 +0000 (13:52 -0700)]
perf/x86: Add more Broadwell model numbers
This patch adds additional model numbers for Broadwell to perf.
Support for Broadwell with Iris Pro (Intel Core i7-57xxC)
and support for Broadwell Server Xeon.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1434055942-28253-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Oleg Nesterov [Sat, 30 May 2015 20:04:25 +0000 (22:04 +0200)]
perf: Fix ring_buffer_attach() RCU sync, again
While looking for other users of get_state/cond_sync. I Found
ring_buffer_attach() and it looks obviously buggy?
Don't we need to ensure that we have "synchronize" _between_
list_del() and list_add() ?
IOW. Suppose that ring_buffer_attach() preempts right_after
get_state_synchronize_rcu() and gp completes before spin_lock().
In this case cond_synchronize_rcu() does nothing and we reuse
->rb_entry without waiting for gp in between?
It also moves the ->rcu_pending check under "if (rb)", to make it
more readable imo.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: der.herr@hofr.at
Cc: josh@joshtriplett.org
Cc: tj@kernel.org
Fixes:
b69cf53640da ("perf: Fix a race between ring_buffer_detach() and ring_buffer_attach()")
Link: http://lkml.kernel.org/r/20150530200425.GA15748@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Fri, 19 Jun 2015 03:02:27 +0000 (17:02 -1000)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c documentation fix from Wolfram Sang:
"Here is a small documentation fix for I2C.
We already had a user who unsuccessfully tried to get the new slave
framework running with the currently broken example. So, before this
happens again, I'd like to have this how-to-use section fixed for 4.1
already. So that no more hacking time is wasted"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: slave: fix the example how to instantiate from userspace
Andrew Morton [Thu, 18 Jun 2015 18:01:11 +0000 (11:01 -0700)]
revert "cpumask: don't perform while loop in cpumask_next_and()"
Revert commit
534b483a86e6 ("cpumask: don't perform while loop in
cpumask_next_and()").
This was a minor optimization, but it puts a `struct cpumask' on the
stack, which consumes too much stack space.
Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Airlie [Fri, 19 Jun 2015 01:58:39 +0000 (11:58 +1000)]
Merge tag 'drm-intel-fixes-2015-06-18' of git://anongit.freedesktop.org/drm-intel into drm-fixes
one fix, one revert
* tag 'drm-intel-fixes-2015-06-18' of git://anongit.freedesktop.org/drm-intel:
Revert "drm/i915: Don't skip request retirement if the active list is empty"
drm/i915: Always reset vma->ggtt_view.pages cache on unbinding
Dave Airlie [Fri, 19 Jun 2015 01:55:29 +0000 (11:55 +1000)]
Merge branch 'drm-fixes-4.1' of git://people.freedesktop.org/~deathsimple/linux into drm-fixes
two radeon fixes
one MST fix,
one query addition, destined for stable, and to fix a regression
* 'drm-fixes-4.1' of git://people.freedesktop.org/~deathsimple/linux:
drm/radeon: don't probe MST on hw we don't support it on
drm/radeon: Add RADEON_INFO_VA_UNMAP_WORKING query
Dave Airlie [Thu, 18 Jun 2015 04:29:18 +0000 (14:29 +1000)]
drm/radeon: don't probe MST on hw we don't support it on
If you do radeon.mst=1 on a gpu without mst hw, and then
plug some mst hw it will oops instead of falling back.
So check we have DCE5 at least before proceeding.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Michel Dänzer [Tue, 16 Jun 2015 08:28:16 +0000 (17:28 +0900)]
drm/radeon: Add RADEON_INFO_VA_UNMAP_WORKING query
This tells userspace that it's safe to use the RADEON_VA_UNMAP operation
of the DRM_RADEON_GEM_VA ioctl.
Cc: stable@vger.kernel.org
(NOTE: Backporting this commit requires at least backports of commits
26d4d129b6042197b4cbc8341c0618f99231af2f,
48afbd70ac7b6aa62e8d452091023941d8085f8a and
c29c0876ec05d51a93508a39b90b92c29ba6423d as well, otherwise using
RADEON_VA_UNMAP runs into trouble)
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Luis R. Rodriguez [Mon, 15 Jun 2015 08:28:18 +0000 (10:28 +0200)]
x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
We are burrying direct access to MTRR code support on
x86 in order to take advantage of PAT. In the future, we
also want to make the default behaviour of ioremap_nocache()
to use strong UC, use of mtrr_add() on those systems
would make write-combining void.
In order to help both enable us to later make strong
UC default and in order to phase out direct MTRR access
code port the driver over to arch_phys_wc_add() and
annotate that the device driver requires systems to
boot with PAT disabled, with the 'nopat' kernel parameter.
This is a workable compromise given that the ipath device
driver powers the old HTX bus cards that only work in
AMD systems, while the newer IB/qib device driver
powers all PCI-e cards. The ipath device driver is
obsolete, hardware is hard to find and because of this
its a reasonable compromise to require users of ipath
to boot with 'nopat'.
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Doug Ledford <dledford@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Walls <awalls@md.metrocast.net>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Stefan Bader <stefan.bader@canonical.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Ville Syrjälä <syrjala@sci.fi>
Cc: infinipath@intel.com
Cc: jbeulich@suse.com
Cc: konrad.wilk@oracle.com
Cc: linux-rdma@vger.kernel.org
Cc: mchehab@osg.samsung.com
Cc: toshi.kani@hp.com
Link: http://lkml.kernel.org/r/1434053994-2196-4-git-send-email-mcgrof@do-not-panic.com
Link: http://lkml.kernel.org/r/1434356898-25135-5-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Luis R. Rodriguez [Mon, 15 Jun 2015 08:28:16 +0000 (10:28 +0200)]
x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
We are burrying direct access to MTRR code support on
x86 in order to take advantage of PAT. In the future, we
also want to make the default behavior of ioremap_nocache()
to use strong UC, at which point the use of mtrr_add() on
those systems would make write-combining void.
In order to help both enable us to later make strong
UC default and in order to phase out direct MTRR access
code, port the driver over to the arch_phys_wc_add() API
and annotate that the device driver requires systems to
boot with PAT disabled, with the 'nopat' kernel parameter.
This is a workable compromise given that the hardware is
really rare these days, and perhaps only some lost souls
stuck with obsolete hardware are expected to be using this
feature of the device driver.
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Walls <awalls@md.metrocast.net>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roger Pau Monné <roger.pau@citrix.com>
Cc: Stefan Bader <stefan.bader@canonical.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ville Syrjälä <syrjala@sci.fi>
Cc: bhelgaas@google.com
Cc: konrad.wilk@oracle.com
Cc: linux-media@vger.kernel.org
Cc: tomi.valkeinen@ti.com
Cc: toshi.kani@hp.com
Link: http://lkml.kernel.org/r/1434053994-2196-2-git-send-email-mcgrof@do-not-panic.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Aravind Gopalakrishnan [Mon, 15 Jun 2015 08:28:15 +0000 (10:28 +0200)]
x86/cpu/amd: Give access to the number of nodes in a physical package
Stash the number of nodes in a physical processor package
locally and add an accessor to be called by interested parties.
The first user is the MCE injection module which uses it to find
the node base core in a package for injecting a certain type of
errors.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
[ Rewrote the commit message, merged it with the accessor patch and unified naming. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jacob Shin <jacob.w.shin@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: mchehab@osg.samsung.com
Link: http://lkml.kernel.org/r/1433868317-18417-2-git-send-email-Aravind.Gopalakrishnan@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Feng Tang [Mon, 15 Jun 2015 09:40:01 +0000 (17:40 +0800)]
x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
This question has been asked many times, and finally I found the
official document which explains the problem of HPET on Baytrail,
that it will halt in deep idle states.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: john.stultz@linaro.org
Cc: len.brown@intel.com
Cc: matthew.lee@intel.com
Link: http://lkml.kernel.org/r/1434361201-31743-1-git-send-email-feng.tang@intel.com
[ Prettified things a bit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Thu, 18 Jun 2015 07:36:33 +0000 (09:36 +0200)]
Merge tag 'perf-core-for-mingo-2' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- List perf probes to stdout. (Masami Hiramatsu)
- Return error when none of the requested probes were
installed. (Masami Hiramatsu)
- Cut off the gcc optimization postfixes from
function name in 'perf probe'. (Masami Hiramatsu)
- Allow disabling/enabling events dynamicly in 'perf top':
a 'perf top' session can instantly become a 'perf report'
one, i.e. going from dynamic analysis to a static one,
returning to a dynamic one is possible, to toogle the
modes, just press CTRL+z. (Arnaldo Carvalho de Melo)
- Greatly speed up 'perf probe --list' by caching debuginfo.
(Masami Hiramatsu)
- Fix 'perf trace' race condition at the end of started
workloads. (Sukadev Bhattiprolu)
- Fix a problem when opening old perf.data with different
byte order. (Wang Nan)
Infrastructure changes:
- Replace map->referenced & maps->removed_maps with
map->refcnt. (Arnaldo Carvalho de Melo)
- Introduce the xyarray__reset() function. (Jiri Olsa)
- Add thread_map__(alloc|realloc)() helpers. (Jiri Olsa)
- Move perf_evsel__(alloc|free|reset)_counts into stat object. (Jiri Olsa)
- Introduce perf_counts__(new|delete|reset)() functions. (Jiri Olsa)
- Ignore .config-detected in .gitignore. (Wang Nan)
- Move libtraceevent dynamic list to separated LDFLAGS
variable. (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Thu, 18 Jun 2015 06:56:57 +0000 (20:56 -1000)]
Merge tag 'trace-fix-filter-4.1-rc8' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing filter fix from Steven Rostedt:
"Vince Weaver reported a warning when he added perf event filters into
his fuzzer tests. There's a missing check of balanced operations when
parenthesis are used, and this triggers a WARN_ON() and when reading
the failure, the filter reports no failure occurred.
The operands were not being checked if they match, this adds that"
* tag 'trace-fix-filter-4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Have filter check for balanced ops
Linus Torvalds [Thu, 18 Jun 2015 06:54:47 +0000 (20:54 -1000)]
Merge git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm bugfix from Marcelo Tosatti:
"Rrestore APIC migration functionality"
* git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: fix lapic.timer_mode on restore
Mauro Carvalho Chehab [Tue, 16 Jun 2015 09:26:59 +0000 (06:26 -0300)]
Kconfig: disable Media Controller for DVB
Since when we start discussions about the usage Media Controller for
complex hardware, one thing become clear: the way it is, MC fails to
map anything different than capture/output/m2m video-only streaming.
The point is that MC has entities named as devnodes, but the only
devnode used (before the DVB patches) is MEDIA_ENT_T_DEVNODE_V4L.
Due to the way MC got implemented, however, this entity actually
doesn't represent the devnode, but the hardware I/O engine that
receives data via DMA.
By coincidence, such DMA is associated with the V4L device node
on webcam hardware, but this is not true even for other V4L2
devices. For example, on USB hardware, the DMA is done via the
USB controller. The data passes though a in-kernel filter that
strips off the URB headers. Other V4L2 devices like radio may not
even have DMA. When it have, the DMA is done via ALSA, and not
via the V4L devnode.
In other words, MC is broken as a whole, but tagging it as BROKEN
right now would do more harm than good.
So, instead, let's mark, for now, the DVB part as broken and
block all new changes to MC while we fix this mess, whith
we hopefully will do for the next Kernel version.
Requested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 18 Jun 2015 06:49:26 +0000 (20:49 -1000)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- Crash in caam hash due to uninitialised buffer lengths.
- Alignment issue in caam RNG that may lead to non-random output"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: caam - fix RNG buffer cache alignment
crypto: caam - improve initalization for context state saves
Hugh Dickins [Sun, 14 Jun 2015 16:48:09 +0000 (09:48 -0700)]
mm: shmem_zero_setup skip security check and lockdep conflict with XFS
It appears that, at some point last year, XFS made directory handling
changes which bring it into lockdep conflict with shmem_zero_setup():
it is surprising that mmap() can clone an inode while holding mmap_sem,
but that has been so for many years.
Since those few lockdep traces that I've seen all implicated selinux,
I'm hoping that we can use the __shmem_file_setup(,,,S_PRIVATE) which
v3.13's commit
c7277090927a ("security: shmem: implement kernel private
shmem inodes") introduced to avoid LSM checks on kernel-internal inodes:
the mmap("/dev/zero") cloned inode is indeed a kernel-internal detail.
This also covers the !CONFIG_SHMEM use of ramfs to support /dev/zero
(and MAP_SHARED|MAP_ANONYMOUS). I thought there were also drivers
which cloned inode in mmap(), but if so, I cannot locate them now.
Reported-and-tested-by: Prarit Bhargava <prarit@redhat.com>
Reported-and-tested-by: Daniel Wagner <wagi@monom.org>
Reported-and-tested-by: Morten Stevens <mstevens@fedoraproject.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnaldo Carvalho de Melo [Wed, 17 Jun 2015 19:50:52 +0000 (16:50 -0300)]
perf top: Allow disabling/enabling events dynamicly
Now it is possible to press CTRL+z at anytime and that will disable the
events being monitored, essentially turning 'top' into 'report', with
pressing CTRL+z again making it enable the events again, returning to
the 'top' behaviour, i.e. dynamic + decaying of older samples.
One may want, for instance, play with:
-d, --delay <n> number of seconds to delay between refreshes
and:
-z, --zero zero history across updates
Plus CTRL+z to see only the events since last zeroing, etc.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zq7tnh5462blt2yda0bcxh5b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 17 Jun 2015 19:40:26 +0000 (16:40 -0300)]
perf evlist: Add toggle_enable() method
For an upcoming feature in 'perf top' we will have a hotkey to
enable/disable events, so remember if the events in the list are
enabled or disabled and allows toggling this state using a new
method.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-64c4jvdl5feg2zhimxvokqka@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sukadev Bhattiprolu [Fri, 12 Jun 2015 05:28:36 +0000 (01:28 -0400)]
perf trace: Fix race condition at the end of started workloads
I get following crash on multiple systems and across several releases
(at least since v3.18).
Core was generated by `/tmp/perf trace sleep 0.2 '.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 perf_mmap__read_head (mm=0x3fff9bf30070) at util/evlist.h:195
195 u64 head = ACCESS_ONCE(pc->data_head);
(gdb) bt
#0 perf_mmap__read_head (mm=0x3fff9bf30070) at util/evlist.h:195
#1 perf_evlist__mmap_read (evlist=0x10027f11910, idx=<optimized out>)
at util/evlist.c:637
#2 0x000000001003ce4c in trace__run (argv=<optimized out>,
argc=<optimized out>, trace=0x3fffd7b28288) at builtin-trace.c:2259
#3 cmd_trace (argc=<optimized out>, argv=<optimized out>,
prefix=<optimized out>) at builtin-trace.c:2799
#4 0x00000000100657b8 in run_builtin (p=0x10176798 <commands+480>, argc=3,
argv=0x3fffd7b2b550) at perf.c:370
#5 0x00000000100063e8 in handle_internal_command (argv=0x3fffd7b2b550, argc=3)
at perf.c:429
#6 run_argv (argv=0x3fffd7b2af70, argcp=0x3fffd7b2af7c) at perf.c:473
#7 main (argc=3, argv=0x3fffd7b2b550) at perf.c:588
The problem seems to be a race condition, when the application has just
exited. Some/all fds associated with the perf-events (tracepoints) go
into a POLLHUP/ POLLERR state and the mmap region associated with those
events are unmapped (in perf_evlist__filter_pollfd()).
But we go back and do a perf_evlist__mmap_read() which assumes that the
mmaps are still valid and we hit the crash.
If the mapping for an event is released, its refcnt is 0 (and ->base
is NULL), so ensure we have non-zero refcount before accessing the map.
Note that perf-record has a similar logic but unlike perf-trace, the
record__mmap_read_all() checks the evlist->mmap[i].base before accessing
the map.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20150612060003.GA19913@us.ibm.com
[ Fixed it up to use atomic_read() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Wed, 17 Jun 2015 14:58:54 +0000 (23:58 +0900)]
perf probe: Speed up perf probe --list by caching debuginfo
Speed up the "perf probe --list" by caching the last used debuginfo.
perf probe --list always open and load debuginfo for each entry of probe
list. This takes very a long time.
E.g. with vfs_* events (total 96 probes)
[root@localhost perf]# time ./perf probe -l &> /dev/null
real 0m25.376s
user 0m24.381s
sys 0m1.012s
To solve this issue, this adds debuginfo_cache to cache the
last used debuginfo on memory.
With this fix, the perf-probe --list significantly improves
its speed.
[root@localhost perf]# time ./perf probe -l &> /dev/null
real 0m0.161s
user 0m0.136s
sys 0m0.025s
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150617145854.19715.15314.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Tue, 16 Jun 2015 11:50:57 +0000 (20:50 +0900)]
perf probe: Show usage even if the last event is skipped
When the last part of converted events are blacklisted or out-of-text,
those are skipped and perf probe doesn't show usage examples. This
fixes it to show the example even if the last part of event list is
skipped.
E.g. without this patch, events are added, but suddenly end:
# perf probe vfs_*
vfs_caches_init_early is out of .text, skip it.
vfs_caches_init is out of .text, skip it.
Added new events:
probe:vfs_fallocate (on vfs_*)
probe:vfs_open (on vfs_*)
...
probe:vfs_dentry_acceptable (on vfs_*)
probe:vfs_load_quota_inode (on vfs_*)
#
With this fix:
# perf probe vfs_*
vfs_caches_init_early is out of .text, skip it.
vfs_caches_init is out of .text, skip it.
Added new events:
probe:vfs_fallocate (on vfs_*)
...
probe:vfs_load_quota_inode (on vfs_*)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_load_quota_inode -aR sleep 1
Note that this can be reproduced ONLY IF the vfs_caches_init* is the
last part of matched symbol list. I've checked this happens on
"3.19.0-generic #18-Ubuntu" kernel binary.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150616115057.19906.5502.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Wed, 17 Jun 2015 14:46:29 +0000 (14:46 +0000)]
perf tools: Move libtraceevent dynamic list to separated LDFLAGS variable
Commit
e3d09ec8126fe2c9a3ade661e2126e215ca27a80 ("tools lib traceevent:
Export dynamic symbols used by traceevent plugins") adds libtraceevent
dynamic list directly into LDFLAGS, which makes all targets depend on
that list through LDFLAGS.
This is not good since some of targets like libgtk.so doesn't use plugin
at all, but require the existance of that list because of linker
options.
This patch isolates the -Xlink option into LIBTRACEEVENT_DYNAMIC_LIST_LDFLAGS,
makes only perf and perf.so use it.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1434552389-89144-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Wed, 17 Jun 2015 09:56:39 +0000 (09:56 +0000)]
perf tools: Fix a problem when opening old perf.data with different byte order
Following error occurs when trying to use 'perf report' on x86_64 to
cross analysis a perf.data generated by an old perf on a big-endian
machine:
# perf report
*** Error in `/home/w00229757/perf': free(): invalid next size (fast): 0x00000000032c99f0 ***
======= Backtrace: =========
/lib64/libc.so.6(+0x6eeef)[0x7ff6ff7e2eef]
/lib64/libc.so.6(+0x78cae)[0x7ff6ff7eccae]
/lib64/libc.so.6(+0x79987)[0x7ff6ff7ed987]
/path/to/perf[0x4ac734]
/path/to/perf[0x4ac829]
/path/to/perf(perf_header__process_sections+0x129)[0x4ad2c9]
/path/to/perf(perf_session__read_header+0x2e1)[0x4ad9e1]
/path/to/perf(perf_session__new+0x168)[0x4bd458]
/path/to/perf(cmd_report+0xfa0)[0x43eb70]
/path/to/perf[0x47adc3]
/path/to/perf(main+0x5f6)[0x42fd06]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x7ff6ff795bd5]
/path/to/perf[0x42fe35]
======= Memory map: ========
[SNIP]
The bug is in perf_event__attr_swap(). It swaps all fields in 'struct
perf_event_attr' without checking whether the swapped field exist or
not. In addition, in read_event_desc() allocs memory for attr according
to size read from perf.data.
Therefore, if the perf.data is collected by an old perf (without
aux_watermark, for example), when perf_event__attr_swap() swaping
attr->aux_watermark it destroy malloc's metadata.
This patch introduces boundary checking in perf_event__attr_swap(). It
adds macros bswap_field_64 and bswap_field_32 into
perf_event__attr_swap() to make it only swap exist fields.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1434534999-85347-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Wed, 17 Jun 2015 11:59:18 +0000 (11:59 +0000)]
perf tools: Ignore .config-detected in .gitignore
Commit
fcfd6611fbccdbf2593bd949097a5c0e45cd96da ("tools build: Add
detected config support") dynamically creates .config-detected. Add it
to .gitignore.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1434542358-5430-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wolfram Sang [Mon, 15 Jun 2015 17:51:46 +0000 (19:51 +0200)]
i2c: slave: fix the example how to instantiate from userspace
I copied the wrong shell code into the documentation. Sorry to all who
tried to get sense out of this current example :/ Slight rewording while
we are here.
Reported-by: Tim Bakker <bakkert@mymail.vcu.edu>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Steven Rostedt [Mon, 15 Jun 2015 21:50:25 +0000 (17:50 -0400)]
tracing: Have filter check for balanced ops
When the following filter is used it causes a warning to trigger:
# cd /sys/kernel/debug/tracing
# echo "((dev==1)blocks==2)" > events/ext4/ext4_truncate_exit/filter
-bash: echo: write error: Invalid argument
# cat events/ext4/ext4_truncate_exit/filter
((dev==1)blocks==2)
^
parse_error: No error
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1223 at kernel/trace/trace_events_filter.c:1640 replace_preds+0x3c5/0x990()
Modules linked in: bnep lockd grace bluetooth ...
CPU: 3 PID: 1223 Comm: bash Tainted: G W 4.1.0-rc3-test+ #450
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
0000000000000668 ffff8800c106bc98 ffffffff816ed4f9 ffff88011ead0cf0
0000000000000000 ffff8800c106bcd8 ffffffff8107fb07 ffffffff8136b46c
ffff8800c7d81d48 ffff8800d4c2bc00 ffff8800d4d4f920 00000000ffffffea
Call Trace:
[<
ffffffff816ed4f9>] dump_stack+0x4c/0x6e
[<
ffffffff8107fb07>] warn_slowpath_common+0x97/0xe0
[<
ffffffff8136b46c>] ? _kstrtoull+0x2c/0x80
[<
ffffffff8107fb6a>] warn_slowpath_null+0x1a/0x20
[<
ffffffff81159065>] replace_preds+0x3c5/0x990
[<
ffffffff811596b2>] create_filter+0x82/0xb0
[<
ffffffff81159944>] apply_event_filter+0xd4/0x180
[<
ffffffff81152bbf>] event_filter_write+0x8f/0x120
[<
ffffffff811db2a8>] __vfs_write+0x28/0xe0
[<
ffffffff811dda43>] ? __sb_start_write+0x53/0xf0
[<
ffffffff812e51e0>] ? security_file_permission+0x30/0xc0
[<
ffffffff811dc408>] vfs_write+0xb8/0x1b0
[<
ffffffff811dc72f>] SyS_write+0x4f/0xb0
[<
ffffffff816f5217>] system_call_fastpath+0x12/0x6a
---[ end trace
e11028bd95818dcd ]---
Worse yet, reading the error message (the filter again) it says that
there was no error, when there clearly was. The issue is that the
code that checks the input does not check for balanced ops. That is,
having an op between a closed parenthesis and the next token.
This would only cause a warning, and fail out before doing any real
harm, but it should still not caues a warning, and the error reported
should work:
# cd /sys/kernel/debug/tracing
# echo "((dev==1)blocks==2)" > events/ext4/ext4_truncate_exit/filter
-bash: echo: write error: Invalid argument
# cat events/ext4/ext4_truncate_exit/filter
((dev==1)blocks==2)
^
parse_error: Meaningless filter expression
And give no kernel warning.
Link: http://lkml.kernel.org/r/20150615175025.7e809215@gandalf.local.home
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: stable@vger.kernel.org # 2.6.31+
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Masami Hiramatsu [Tue, 16 Jun 2015 11:50:55 +0000 (20:50 +0900)]
perf probe: Fix to return error if no probe is added
Fix perf probe to return an error if no probe is added due to the given
probe point being on the blacklist.
To fix this problem, this moves the blacklist checking to right after
finding symbols/probe-points and marks them as skipped.
If all the symbols are skipped, "perf probe" returns an error as it
fails to find the corresponding probe address.
E.g. currently if a blacklisted probe is given:
# perf probe do_trap && echo 'succeed'
Added new event:
Warning: Skipped probing on blacklisted function: sync_regs
succeed
No! It must fail! With this patch, it correctly fails:
# perf probe do_trap && echo 'succeed'
do_trap is blacklisted function, skip it.
Probe point 'do_trap' not found.
Error: Failed to add events.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150616115055.19906.31359.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Hou Pengyang [Tue, 16 Jun 2015 11:16:35 +0000 (11:16 +0000)]
perf unwind: Fix a compile error
When libunwind is on, there is a compile error as :
util/unwind-libunwind.c:363:21: error: 'dso' undeclared (first use in this function)
dso__data_put_fd(dso);
This patch fixes it.
Signed-off-by: Hou Pengyang <houpengyang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes:
4bb11d012ab248d0 ("perf tools: Add dso__data_get/put_fd()")
Link: http://lkml.kernel.org/r/1434453395-10560-1-git-send-email-houpengyang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 14 Jun 2015 08:19:27 +0000 (10:19 +0200)]
perf stat: Introduce perf_counts__(new|delete|reset) functions
Move 'struct perf_counts' allocation|free|reset code into separate
functions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434269985-521-13-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 14 Jun 2015 08:19:26 +0000 (10:19 +0200)]
perf tools: Move perf_evsel__(alloc|free|reset)_counts into stat object
It's stat specific. Updating python build objects with stat.c.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434269985-521-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 14 Jun 2015 08:19:17 +0000 (10:19 +0200)]
perf tools: Add thread_map__(alloc|realloc) helpers
In order to have 'struct thread_map' allocation on single place and can
change it easily in following patch.
Using alloc|realloc for static helpers, because thread_map__new is
already used in public interface.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434269985-521-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 14 Jun 2015 08:19:16 +0000 (10:19 +0200)]
perf tools: Introduce xyarray__reset function
To zero all the xyarray contents. It will be used in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434269985-521-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Sat, 13 Jun 2015 01:31:16 +0000 (10:31 +0900)]
perf probe: List probes in stdout
Since commit
5e17b28f1e24 ("perf probe: Add --quiet option to
suppress output result message") have replaced printf with pr_info,
perf probe -l outputs its result in stderr. However, that is not
what the commit expected.
E.g.:
# perf probe -l > /dev/null
probe:vfs_read (on vfs_read@ksrc/linux-3/fs/read_write.c)
With this fix:
# perf probe -l > list
# cat list
probe:vfs_read (on vfs_read@ksrc/linux-3/fs/read_write.c)
Of course, --quiet(-q) still works on --add/--del.
# perf probe -q vfs_write
# perf probe -l
probe:vfs_read (on vfs_read@ksrc/linux-3/fs/read_write.c)
probe:vfs_write (on vfs_write@ksrc/linux-3/fs/read_write.c)
-----
Reported-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150613013116.24402.2923.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Fri, 12 Jun 2015 03:17:11 +0000 (03:17 +0000)]
tools lib traceevent: Fix python/perf.so compiling error
'make build-test' finds an error that make_python_perf_so fails due to
missing of libtraceevent-dynamic-list:
'.../python2' util/setup.py \
--quiet build_ext; \
mkdir -p python && \
cp python_ext_build/lib/perf.so python/
/path/to/ld: cannot open linker script file /path/to/kernel/tools/lib/traceevent/libtraceevent-dynamic-list: No such file or directory
collect2: error: ld returned 1 exit status
error: command 'x86_64-linux-gcc' failed with exit status 1
cp: cannot stat 'python_ext_build/lib/perf.so': No such file or directory
make[3]: *** [python/perf.so] Error 1
make[2]: *** [python/perf.so] Error 2
test: test -f ./python/perf.so
make[1]: *** [make_python_perf_so] Error 1
make: *** [build-test] Error 2
make: Leaving directory `/path/to/kernel/tools/perf'
This is caused by commit
e3d09ec8126fe2c9a3ade661e2126e215ca27a80
("tools lib traceevent: Export dynamic symbols used by traceevent
plugins") that, it adds the list file to LDFLAGS but forgot to add it to
dependency list of python/perf.so.
This patch fixes this problem.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1434079031-123162-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 16 Jun 2015 02:29:51 +0000 (23:29 -0300)]
perf tools: Replace map->referenced & maps->removed_maps with map->refcnt
Use just reference counts, so that when no more hist_entry instances
references a map and the thread instance goes away by processing a
PERF_RECORD_EXIT, we can delete the maps.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-oym7lfhcc7ss6xpz44h7nbxs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Takashi Iwai [Tue, 16 Jun 2015 10:23:36 +0000 (12:23 +0200)]
ALSA: hda - Fix unused label skip_i915
When CONFIG_SND_HDA_I915=n, we get a compile warning:
sound/pci/hda/hda_intel.c: In function ‘azx_probe_continue’:
sound/pci/hda/hda_intel.c:1882:2: warning: label ‘skip_i915’ defined but not used [-Wunused-label]
Fix it by putting again ifdef to it. Sigh.
Fixes:
bf06848bdbe5 ('ALSA: hda - Continue probing even if i915 binding fails')
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Jiang Liu [Mon, 1 Jun 2015 08:05:11 +0000 (16:05 +0800)]
genirq: Prevent crash in irq_move_irq()
The functions irq_move_irq() and irq_move_masked_irq() expect that the
caller passes the top-level irq_data to them when hierarchical
irqdomains are enabled. But that's not true when called from
apic_ack_edge(), which results in a null pointer dereference by
idata->chip->irq_mask(idata).
Instead of fixing callers to passing top-level irq_data, we rather
change irq_move_irq()/irq_move_masked_irq() to accept any irq_data.
Fixes:
52f518a3a7c 'x86/MSI: Use hierarchical irqdomains to manage MSI interrupts'
Reported-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1433145945-789-3-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Jiang Liu [Mon, 1 Jun 2015 08:05:10 +0000 (16:05 +0800)]
genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
For irq associated with hierarchy irqdomains, there will be multiple
irq_datas for one irq_desc. So enhance irq_data_to_desc() to support
hierarchy irqdomain. Also export irq_data_to_desc() as an inline
function for later reuse.
Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/1433145945-789-2-git-send-email-jiang.liu@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>