Mike Frysinger [Thu, 31 Mar 2011 19:40:52 +0000 (15:40 -0400)]
Blackfin: use new common PERCPU_INPUT define
The Blackfin percpu input sections are outdated, so rather than update
them, drop them completely and use the new common define.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Lars-Peter Clausen [Tue, 24 May 2011 07:17:11 +0000 (08:17 +0100)]
MAINTAINERS: Fix Analog Devices mailinglist address
There is a small typo in the Analog Devices driver mailinglist address.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Scott Jiang [Tue, 1 Mar 2011 09:43:50 +0000 (09:43 +0000)]
Blackfin: boards: update ASoC resources after machine driver overhaul
Now that the Blackfin machine drivers have been updated to the
multicomponent support, update the resources to match. The pin
settings are now a board issue and removed from the driver.
Signed-off-by: Scott Jiang <scott.jiang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Steven Miao [Thu, 5 May 2011 06:14:48 +0000 (14:14 +0800)]
Blackfin: work around anomaly
05000480
Anomaly
05000480 on BF537 rev 0.0, 0.1, 0.2:
Multiple Simultaneous Urgent DMA Requests May Cause DMA System Instability
Suggested Workaround:
Program the DMA Traffic Control Period to a non-zero value. This forces
the DMA block to group accesses together rather than allow arbitration for
each piece of data placed on the internal DMA bus.
Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 19 May 2011 00:46:03 +0000 (20:46 -0400)]
Blackfin: fix addr type with bfin_write_{or,and} helpers
Since the bfin_write() func needs proper type information in order to
expand into the right bfin_writeX() variant, preserve the addr's type
when setting up the local __addr. Otherwise the helpers will detect
the variant based upon sizeof(void) which is almost never right.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Alexey Dobriyan [Sat, 14 May 2011 16:51:54 +0000 (19:51 +0300)]
Blackfin: convert /proc/sram to seq_file
->read_proc interface is going away, switch to seq_file.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Alexey Dobriyan [Sat, 14 May 2011 16:48:46 +0000 (19:48 +0300)]
Blackfin: switch /proc/gpio to seq_file
->read_proc interface is going away, switch to seq_file.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sat, 14 May 2011 14:22:45 +0000 (10:22 -0400)]
Blackfin: fix indentation with bfin_read() helper
Use tabs instead of spaces to indent.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
KOSAKI Motohiro [Tue, 26 Apr 2011 01:57:27 +0000 (10:57 +0900)]
Blackfin: convert old cpumask API to new one
old cpu_xxx() APIs is planned to removed later. then, converted.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
KOSAKI Motohiro [Tue, 26 Apr 2011 01:56:42 +0000 (10:56 +0900)]
Blackfin: don't touch task->cpus_allowed directly
Every callter (except kthread_bind) should use proper
set_cpus_allowed_ptr() APIs.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
KOSAKI Motohiro [Tue, 26 Apr 2011 01:55:41 +0000 (10:55 +0900)]
Blackfin: don't touch cpu_possible_map and cpu_present_map directly
We plan to remove cpu_possible_map and cpu_present_map later and we
have proper init_cpu_possible() and init_cpu_present() APIs.
Therefore this patch rewrites platform_init_cpus and platform_prepare_cpus
by their APIs.
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 9 May 2011 22:46:17 +0000 (18:46 -0400)]
Blackfin: bf548-ezkit/bf561-ezkit: update nor flash layout
Both the BF548-EZKIT and the BF561-EZKIT use top boot flashes, so now
that Das U-Boot uses the last small sector for its environment, update
their nor layout in the kernel accordingly.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 6 May 2011 15:47:52 +0000 (11:47 -0400)]
Blackfin: initial perf_event support
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 6 May 2011 06:26:38 +0000 (02:26 -0400)]
Blackfin: update anomaly lists to latest public info
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 2 May 2011 04:00:35 +0000 (00:00 -0400)]
Blackfin: use on-chip reset func with newer parts
Turns out the documentation is wrong and doing "RAISE 1" does not result
in a software reset, only a core reset. So when the on-chip rom has a
functioning reset helper, use it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 25 Apr 2011 08:11:24 +0000 (04:11 -0400)]
Blackfin: bf533-stamp/bf537-stamp: drop ad1980 from defconfigs
These boards don't have AD1980 modules, and that device is deprecated,
so don't bother building it up by default anymore.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 18 Apr 2011 22:37:38 +0000 (18:37 -0400)]
Blackfin: optimize MMR reads during startup a bit
Since the value of these MMRs aren't changing, store the value in a local
variable and work off of that. This avoids multiple MMR reads which are
implicitly forced by the volatile markings.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 15 Apr 2011 17:04:59 +0000 (13:04 -0400)]
Blackfin: bf537: demux port H mask A and emac rx ints
The BF537 SIC combines the gpio port H mask A interrupts with the
emac rx interrupt, so we need to demux this in software.
It also combines the gpio port H mask B and the emac tx interrupts,
and the watchdog and port F mask B interrupts, but since we don't
support mask B yet, just add the defines for now.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 15 Apr 2011 16:51:33 +0000 (12:51 -0400)]
Blackfin: bf537: fix excessive gpio int demuxing
The search logic in the gpio demux walks all possible gpio blocks starting
at the specified pin. The trouble on bf537 parts when we demux the port
F and port G mask A interrupts is that we also demux port H mask A ints.
Most of the time this isn't an issue as people don't usually use port H,
but might as well avoid it when possible.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 15 Apr 2011 07:19:22 +0000 (03:19 -0400)]
Blackfin: bf54x: drop unused pm gpio handling
This functionality was merged into the common bfin_pm_standby_ctrl func
some time ago, so punt these now unused funcs and data, and localize the
wake funcs that aren't needed externally anymore.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 15 Apr 2011 07:08:20 +0000 (03:08 -0400)]
Blackfin: move bf537-specific irq code out of common code
The SIC interrupt line muxing that the bf537 does is specific to this
CPU (thankfully), so rip it out of the common code and move it to a
bf537-specific file. This tidies up the common code significantly.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 15 Apr 2011 07:06:59 +0000 (03:06 -0400)]
Blackfin: move internal irq prototypes out of global namespace
These are only used in a few internal Blackfin places, so move the irq
prototypes out of the global header and into the internal irq one. No
functional changes other than shuffling locales.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 15 Apr 2011 05:35:53 +0000 (01:35 -0400)]
Blackfin: clean up irq ifdef logic a bit
Prefer MMR named checks over part-specific lists, condense duplicated
code across different #ifdef branches, simplify CONFIG_PM ifdefs, and
drop unused kgdb header.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 14 Apr 2011 07:48:56 +0000 (03:48 -0400)]
Blackfin: bf51x/bf52x: fix typo in hysteresis MMR names
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 14 Apr 2011 03:59:08 +0000 (23:59 -0400)]
Blackfin: delete duplicated user single step prototypes
These are in linux/ptrace.h, so no need for us to duplicate them.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Sonic Zhang [Thu, 5 Aug 2010 07:58:15 +0000 (07:58 +0000)]
Blackfin: kgdb: cache flushing is not safe in SMP mode
Make sure we mark cache flushing as unsafe to kgdb in SMP mode so that
kgdb doesn't flush things incorrectly on us.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 13 Apr 2011 23:12:39 +0000 (19:12 -0400)]
Blackfin: SMP: drop unused blackfin_cpudata.idle pointer
Not sure when we stopped using this field, but nothing in the tree uses
this now, so punt it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 13 Apr 2011 22:57:57 +0000 (18:57 -0400)]
Blackfin: SMP: fix cpudata cache setup
After some cache setup reordering changesets, the blackfin_cpudata init
was left behind. While cpu0's data was correct, cpu1's data was not.
Not that big of a deal as these are only used in the cpuinfo output, but
should still be fixed. So move the setup of these fields to the common
cache setup function to avoid this happening again in the future.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 13 Apr 2011 21:13:23 +0000 (17:13 -0400)]
Blackfin: clean up /proc/cpuinfo output
The smp flush lines are too long and have too many newlines, so scale
them back to match the other lines.
The %p modifier shows "(null)" for 0, so use %08x instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 8 Apr 2011 01:53:50 +0000 (21:53 -0400)]
Blackfin: bf527-ezkit: tweak sound defconfig
Build the sound pieces that the board actually has into the kernel, and
punt older devices that we discourage.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 30 Mar 2011 08:09:26 +0000 (04:09 -0400)]
Blackfin: bf533/bf537/bf561: convert to BFIN_IRQ helper
This brings the parts in line with newer ones, and makes things easier
to read at a glance.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 30 Mar 2011 07:59:00 +0000 (03:59 -0400)]
Blackfin: clean up style in irq defines
These files had a lot of whitespace damage, mostly due to copying and
pasting original files that had damage.
The BF561 header also had a lot of unused CONFIG_DEF_xxx defines, so
punt them all.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 30 Mar 2011 06:54:33 +0000 (02:54 -0400)]
Blackfin: unify core IRQ definitions
Start a new common IRQ header and move all of the CEC pieces there. This
lets the individual part headers worry just about its SIC defines.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 30 Mar 2011 05:35:41 +0000 (01:35 -0400)]
Blackfin: ints-priority: unify duplicate vec to irq lookup logic
Seems the ipipe code just copied & pasted the existing irq lookup logic,
so pull the logic out of do_irq() and into a local helper, and convert
the two users over to that.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 30 Mar 2011 04:43:52 +0000 (00:43 -0400)]
Blackfin: ints-priority: clean up some local vars
The local ivg structs need not be exported, so mark them as static.
Further, the "num_spurious" variable is only incremented and never
actually read anywhere, so punt it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Sonic Zhang [Tue, 30 Jun 2009 09:48:03 +0000 (09:48 +0000)]
Blackfin: don't attempt to flush on-chip L1 SRAM regions
Since the on-chip L1 regions are not cacheable, there is no point in
trying to flush/invalidate them. Plus, older Blackfin parts like to
trigger an exception (like BF533-0.3).
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 25 Sep 2007 05:14:15 +0000 (05:14 +0000)]
Blackfin: first pass at debug mmr support
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Linus Torvalds [Tue, 24 May 2011 23:39:23 +0000 (16:39 -0700)]
Merge branch 'for-linus/2640/i2c' of git://git.fluff.org/bjdooks/linux
* 'for-linus/2640/i2c' of git://git.fluff.org/bjdooks/linux: (21 commits)
mach-ux500: set proper I2C platform data from MOP500s
i2c-nomadik: break out single messsage transmission
i2c-nomadik: reset the hw after status check
i2c-nomadik: remove the unnecessary delay
i2c-nomadik: change the TX and RX threshold
i2c-nomadik: add code to retry on timeout failure
i2c-nomadik: use pm_runtime API
i2c-nomadik: print abort cause only on abort tag
i2c-nomadik: correct adapter timeout initialization
i2c-nomadik: remove the redundant error message
i2c-nomadik: corrrect returned error numbers
i2c-nomadik: fix speed enumerator
i2c-nomadik: make i2c timeout specific per i2c bus
i2c-nomadik: add regulator support
i2c: i2c-sh_mobile bus speed platform data V2
i2c: i2c-sh_mobile clock string removal
i2c-eg20t: Support new device ML7223 IOH
i2c: tegra: Add de-bounce cycles.
i2c: tegra: fix repeated start handling
i2c: tegra: recover from spurious interrupt storm
...
Ben Dooks [Tue, 24 May 2011 23:25:55 +0000 (00:25 +0100)]
Merge branches 'for-2639/i2c-eg20t', 'for-2639/i2c-shmobile', 'for-2639/i2c-tegra' and 'for-2639/i2c-nomadik2' into for-linus/2640/i2c
Linus Walleij [Fri, 13 May 2011 10:31:13 +0000 (12:31 +0200)]
mach-ux500: set proper I2C platform data from MOP500s
This specifies the new per-platform timeout per I2C bus and
switches the I2C buses to fast mode, and increase the FIFO
depth to 8 for reads and writes.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Linus Walleij [Fri, 13 May 2011 10:31:01 +0000 (12:31 +0200)]
i2c-nomadik: break out single messsage transmission
Reduce code size in the message transfer function by factoring out
a single-message transfer function.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Virupax Sadashivpetimath [Fri, 13 May 2011 10:30:53 +0000 (12:30 +0200)]
i2c-nomadik: reset the hw after status check
In case of I2C timeout, reset the HW only after the HW status
is read, otherwise the staus will be lost.
Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Virupax Sadashivpetimath [Fri, 13 May 2011 10:30:42 +0000 (12:30 +0200)]
i2c-nomadik: remove the unnecessary delay
The delay in the driver seems to be not needed, so remove it.
Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: Markus Grape <markus.grape@stericsson.com>
Tested-by: Per Persson <per.xb.persson@stericsson.com>
Tested-by: Chethan Krishna N <chethan.krishna@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Virupax Sadashivpetimath [Fri, 13 May 2011 10:30:34 +0000 (12:30 +0200)]
i2c-nomadik: change the TX and RX threshold
1) Increase RX FIFO threshold so that there is a reduction in
the number of interrupts handled to complete a transaction.
2) Fill TX FIFO in the write function.
Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Virupax Sadashivpetimath [Fri, 13 May 2011 10:30:23 +0000 (12:30 +0200)]
i2c-nomadik: add code to retry on timeout failure
It is seen that i2c-nomadik controller randomly stops generating the
interrupts leading to a i2c timeout. As a workaround to this problem,
add retries to the on going transfer on failure.
Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Rabin Vincent [Fri, 13 May 2011 10:30:07 +0000 (12:30 +0200)]
i2c-nomadik: use pm_runtime API
Use the pm_runtime API for pins control.
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
[deleted some surplus runtime PM code]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Virupax Sadashivpetimath [Fri, 13 May 2011 10:29:55 +0000 (12:29 +0200)]
i2c-nomadik: print abort cause only on abort tag
Modify the code to:
1)Print the cause of i2c failure only if the status is set to ABORT.
2)Print slave address on send/receive fail, will help in which slave
failed.
Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Virupax Sadashivpetimath [Fri, 13 May 2011 10:29:46 +0000 (12:29 +0200)]
i2c-nomadik: correct adapter timeout initialization
Correct the incorrect initialization of adapter timeout not to be
in milliseconds, as it needs to be done in jiffies.
Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
srinidhi kasagar [Fri, 13 May 2011 10:29:38 +0000 (12:29 +0200)]
i2c-nomadik: remove the redundant error message
The abort cause string itself is an error, so remove the redundant
explicit error message.
Signed-off-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Virupax Sadashivpetimath [Fri, 13 May 2011 10:29:28 +0000 (12:29 +0200)]
i2c-nomadik: corrrect returned error numbers
The code was returning bad error numbers or just -1 in some cases.
Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Linus Walleij [Fri, 13 May 2011 10:29:20 +0000 (12:29 +0200)]
i2c-nomadik: fix speed enumerator
The I2C speed enumerators in the i2c-nomadik header file were in
the wrong order.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Virupax Sadashivpetimath [Fri, 13 May 2011 10:29:12 +0000 (12:29 +0200)]
i2c-nomadik: make i2c timeout specific per i2c bus
Add option to have different i2c timeout delay for different i2c buses
specified in platform data. Default to the old value unless specified.
Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Jonas Aberg [Fri, 13 May 2011 10:29:02 +0000 (12:29 +0200)]
i2c-nomadik: add regulator support
This on-chip I2C controller needs to fetch the regulator
representing its voltage domain so that it won't be switched off.
Signed-off-by: Jonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Linus Torvalds [Tue, 24 May 2011 22:20:02 +0000 (15:20 -0700)]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
i2c-parport: Various cleanups
i2c-i801: Don't depend on other kernel driver config options
i2c-i801: Check for vendor Fujitsu before probing for apanel
i2c-i801: Don't probe for slaves on IDF channels
i2c-i801: SMBus patch for Intel Panther Point DeviceIDs
i2c/writing-clients: Fix foo_driver.id_table
Linus Torvalds [Tue, 24 May 2011 22:11:46 +0000 (15:11 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs-2.6
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
jbd: Fix comment to match the code in journal_start()
jbd/jbd2: remove obsolete summarise_journal_usage.
jbd: Fix forever sleeping process in do_get_write_access()
ext2: fix error msg when mounting fs with too-large blocksize
jbd: fix fsync() tid wraparound bug
ext3: Fix fs corruption when make_indexed_dir() fails
ext3: Fix lock inversion in ext3_symlink()
Linus Torvalds [Tue, 24 May 2011 22:04:00 +0000 (15:04 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/teigland/dlm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
dlm: make plock operation killable
dlm: remove shared message stub for recovery
dlm: delayed reply message warning
dlm: Remove superfluous call to recalc_sigpending()
Linus Torvalds [Tue, 24 May 2011 20:38:19 +0000 (13:38 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (43 commits)
TOMOYO: Fix wrong domainname validation.
SELINUX: add /sys/fs/selinux mount point to put selinuxfs
CRED: Fix load_flat_shared_library() to initialise bprm correctly
SELinux: introduce path_has_perm
flex_array: allow 0 length elements
flex_arrays: allow zero length flex arrays
flex_array: flex_array_prealloc takes a number of elements, not an end
SELinux: pass last path component in may_create
SELinux: put name based create rules in a hashtable
SELinux: generic hashtab entry counter
SELinux: calculate and print hashtab stats with a generic function
SELinux: skip filename trans rules if ttype does not match parent dir
SELinux: rename filename_compute_type argument to *type instead of *con
SELinux: fix comment to state filename_compute_type takes an objname not a qstr
SMACK: smack_file_lock can use the struct path
LSM: separate LSM_AUDIT_DATA_DENTRY from LSM_AUDIT_DATA_PATH
LSM: split LSM_AUDIT_DATA_FS into _PATH and _INODE
SELINUX: Make selinux cache VFS RCU walks safe
SECURITY: Move exec_permission RCU checks into security modules
SELinux: security_read_policy should take a size_t not ssize_t
...
Linus Torvalds [Tue, 24 May 2011 20:31:37 +0000 (13:31 -0700)]
Merge branch 'kbuild' of git://git./linux/kernel/git/mmarek/kbuild-2.6
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
kbuild: make KBUILD_NOCMDDEP=1 handle empty built-in.o
scripts/kallsyms.c: fix potential segfault
scripts/gen_initramfs_list.sh: Convert to a /bin/sh script
kbuild: Fix GNU make v3.80 compatibility
kbuild: Fix passing -Wno-* options to gcc 4.4+
kbuild: move scripts/basic/docproc.c to scripts/docproc.c
kbuild: Fix Makefile.asm-generic for um
kbuild: Allow to combine multiple W= levels
kbuild: Disable -Wunused-but-set-variable for gcc 4.6.0
Fix handling of backlash character in LINUX_COMPILE_BY name
kbuild: asm-generic support
kbuild: implement several W= levels
kbuild: Fix build with binutils <= 2.19
initramfs: Use KBUILD_BUILD_TIMESTAMP for generated entries
kbuild: Allow to override LINUX_COMPILE_BY and LINUX_COMPILE_HOST macros
kbuild: Drop unused LINUX_COMPILE_TIME and LINUX_COMPILE_DOMAIN macros
kbuild: Use the deterministic mode of ar
kbuild: Call gzip with -n
kbuild: move KALLSYMS_EXTRA_PASS from Kconfig to Makefile
Kconfig: improve KALLSYMS_ALL documentation
Fix up trivial conflict in Makefile
Linus Torvalds [Tue, 24 May 2011 20:28:35 +0000 (13:28 -0700)]
Merge git://git./linux/kernel/git/brodo/pcmcia-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
pcmcia: Make struct pcmcia_device_id const, sound drivers edition
staging: pcmcia: Convert pcmcia_device_id declarations to const
pcmcia: Convert pcmcia_device_id declarations to const
pcmcia: Make declaration and uses of struct pcmcia_device_id const
pcmcia/sa1100: put sa11x0_pcmcia_hw_init[] to .devinit.data
Linus Torvalds [Tue, 24 May 2011 19:06:40 +0000 (12:06 -0700)]
Merge branch 'drm-core-next' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (169 commits)
drivers/gpu/drm/radeon/atom.c: fix warning
drm/radeon/kms: bump kms version number
drm/radeon/kms: properly set num banks for fusion asics
drm/radeon/kms/atom: move dig phy init out of modesetting
drm/radeon/kms/cayman: fix typo in register mask
drm/radeon/kms: fix typo in spread spectrum code
drm/radeon/kms: fix tile_config value reported to userspace on cayman.
drm/radeon/kms: fix incorrect comparison in cayman setup code.
drm/radeon/kms: add wait idle ioctl for eg->cayman
drm/radeon/cayman: setup hdp to invalidate and flush when asked
drm/radeon/evergreen/btc/fusion: setup hdp to invalidate and flush when asked
agp/uninorth: Fix lockups with radeon KMS and >1x.
drm/radeon/kms: the SS_Id field in the LCD table if for LVDS only
drm/radeon/kms: properly set the CLK_REF bit for DCE3 devices
drm/radeon/kms: fixup eDP connector handling
drm/radeon/kms: bail early for eDP in hotplug callback
drm/radeon/kms: simplify hotplug handler logic
drm/radeon/kms: rewrite DP handling
drm/radeon/kms/atom: add support for setting DP panel mode
drm/radeon/kms: atombios.h updates for DP panel mode
...
Linus Torvalds [Tue, 24 May 2011 19:06:02 +0000 (12:06 -0700)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (29 commits)
[S390] cpu hotplug: fix external interrupt subclass mask handling
[S390] oprofile: dont access lowcore
[S390] oprofile: add missing irq stats counter
[S390] Ignore sendmmsg system call note wired up warning
[S390] s390,oprofile: fix compile error for !CONFIG_SMP
[S390] s390,oprofile: fix alert counter increment
[S390] Remove unused includes in process.c
[S390] get CPC image name
[S390] sclp: event buffer dissection
[S390] chsc: process channel-path-availability information
[S390] refactor page table functions for better pgste support
[S390] merge page_test_dirty and page_clear_dirty
[S390] qdio: prevent compile warning
[S390] sclp: remove unnecessary sendmask check
[S390] convert old cpumask API into new one
[S390] pfault: cleanup code
[S390] pfault: cpu hotplug vs missing completion interrupts
[S390] smp: add __noreturn attribute to cpu_die()
[S390] percpu: implement arch specific irqsafe_cpu_ops
[S390] vdso: disable gcov profiling
...
Jean Delvare [Tue, 24 May 2011 18:58:49 +0000 (20:58 +0200)]
i2c-parport: Various cleanups
* Fix white space.
* Rename labels to something meaningful.
* Prefix defines with PORT_ to avoid collision with macros from
<linux/parport.h>.
* Add const markers where possible.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Linus Torvalds [Tue, 24 May 2011 18:58:49 +0000 (11:58 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander
Input: tsc2007 - add X, Y and Z fuzz factors to platform data
Input: tsc2007 - add poll_period parameter to platform data
Input: tsc2007 - add poll_delay parameter to platform data
Input: tsc2007 - add max_rt parameter to platform data
Input: tsc2007 - debounce pressure measurement
Input: ad714x - fix captouch wheel option algorithm
Input: ad714x - allow platform code to specify irqflags
Input: ad714x - fix threshold and completion interrupt masks
Input: ad714x - fix up input configuration
Input: elantech - remove support for proprietary X driver
Input: elantech - report multitouch with proper ABS_MT messages
Input: elantech - export pressure and width when supported
Input: elantech - describe further the protocol
Input: atmel_tsadcc - correct call to input_free_device
Input: add driver FSL MPR121 capacitive touch sensor
Input: remove useless synchronize_rcu() calls
Input: ads7846 - fix gpio_pendown configuration
Input: ads7846 - add possibility to use external vref on ads7846
Input: rotary-encoder - add support for half-period encoders
...
Jean Delvare [Tue, 24 May 2011 18:58:49 +0000 (20:58 +0200)]
i2c-i801: Don't depend on other kernel driver config options
Don't let other driver config options influence us, as it makes the
code more complex and fragile for a small benefit. There's nothing
wrong with instantiating I2C devices even if they don't have a driver.
And we're talking about 835 extra bytes in the binary on x86-64,
that's hardly worth arguing about.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: David Woodhouse <david.woodhouse@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Jean Delvare [Tue, 24 May 2011 18:58:49 +0000 (20:58 +0200)]
i2c-i801: Check for vendor Fujitsu before probing for apanel
Scanning the BIOS memory for the apanel information is costly, so
avoid doing it on non-Fujitsu machines.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Jean Delvare [Tue, 24 May 2011 18:58:49 +0000 (20:58 +0200)]
i2c-i801: Don't probe for slaves on IDF channels
I don't know if Fujitsu is ever going to produce Patsburg-based
machines, but if they do, I'd rather not probe the secondary (IDF)
SMBus channels. At least not until we have a good reason for doing so.
On a side note, I'm not even sure if it is right to enable detection
of HWMON and DDC devices on the IDF channels. Time will tell...
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Seth Heasley [Tue, 24 May 2011 18:58:49 +0000 (20:58 +0200)]
i2c-i801: SMBus patch for Intel Panther Point DeviceIDs
This patch adds the SMBus controller DeviceID for the Intel Panther Point PCH.
Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Vikram Narayanan [Tue, 24 May 2011 18:58:48 +0000 (20:58 +0200)]
i2c/writing-clients: Fix foo_driver.id_table
The i2c_device_id structure variable's name is not used in the
i2c_driver structure.
Signed-off-by: Vikram Narayanan <vikram186@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Linus Torvalds [Tue, 24 May 2011 18:53:42 +0000 (11:53 -0700)]
Merge branch 'for-2.6.40' of git://git./linux/kernel/git/tj/percpu
* 'for-2.6.40' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: Unify input section names
percpu: Avoid extra NOP in percpu_cmpxchg16b_double
percpu: Cast away printk format warning
percpu: Always align percpu output section to PAGE_SIZE
Fix up fairly trivial conflict in arch/x86/include/asm/percpu.h as per Tejun
Linus Torvalds [Tue, 24 May 2011 18:51:26 +0000 (11:51 -0700)]
Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6
* 'linux-next' of git://git.infradead.org/ubi-2.6:
UBI: switch to dynamic printks
UBI: turn some macros into static inline
UBI: improve checking in debugging prints
UBI: fix typo in a message
UBI: fix minor stylistic issues
UBI: use __packed instead of __attribute__((packed))
UBI: cleanup comments around volume properties
UBI: re-name set volume properties ioctl
UBI: make the control character device non-seekable
Linus Torvalds [Tue, 24 May 2011 18:51:07 +0000 (11:51 -0700)]
Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
* 'linux-next' of git://git.infradead.org/ubifs-2.6: (52 commits)
UBIFS: switch to dynamic printks
UBIFS: fix kernel-doc comments
UBIFS: fix extremely rare mount failure
UBIFS: simplify LEB recovery function further
UBIFS: always cleanup the recovered LEB
UBIFS: clean up LEB recovery function
UBIFS: fix-up free space on mount if flag is set
UBIFS: add the fixup function
UBIFS: add a superblock flag for free space fix-up
UBIFS: share the next_log_lnum helper
UBIFS: expect corruption only in last journal head LEBs
UBIFS: synchronize write-buffer before switching to the next bud
UBIFS: remove BUG statement
UBIFS: change bud replay function conventions
UBIFS: substitute the replay tree with a replay list
UBIFS: simplify replay
UBIFS: store free and dirty space in the bud replay entry
UBIFS: remove unnecessary stack variable
UBIFS: double check that buds are replied in order
UBIFS: make 2 functions static
...
Linus Torvalds [Tue, 24 May 2011 18:50:27 +0000 (11:50 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/gerg/m68knommu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (22 commits)
m68knommu: Use generic show_interrupts()
coldfire_qspi compile fix
m68k: merge the mmu and non-mmu versions of sys_m68k.c
m68knommu: use asm-generic/bitops/ext2-atomic.h
m68knommu: Remove obsolete #include <linux/sys.h>
m68k: merge mmu and non-mmu versions of asm-offsets.c
m68k: merge non-mmu and mmu versions of m68k_ksyms.c
m68knommu: remove un-needed exporting of COLDFIRE symbols
m68knommu: move EXPORT of kernel_thread to function definition
m68knommu: move EXPORT of local checksumming functions to definitions
m68knommu: move EXPORT of dump_fpu to function definition
m68knommu: clean up mm/init_no.c
m68k: merge the mmu and non-mmu mm/Makefile
m68k: mv kmap_mm.c to kmap.c
m68knommu: remove stubs for __ioremap() and iounmap()
m68knommu: remove unused kernel_set_cachemode()
m68k: let Makefile sort out compiling mmu and non-mmu lib/checksum.c
m68k: remove duplicate memcpy() implementation
m68k: remove duplicate memset() implementation
m68k: remove duplicate memmove() implementation
...
Linus Torvalds [Tue, 24 May 2011 18:49:16 +0000 (11:49 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, ioapic: Restore ioapic entries during resume properly
x86: Get rid of asmregparm
um: Use RWSEM_GENERIC_SPINLOCK on x86
Suresh Siddha [Tue, 24 May 2011 17:45:31 +0000 (10:45 -0700)]
x86, ioapic: Restore ioapic entries during resume properly
In mask/restore_ioapic_entries() we should be restoring ioapic
entries when ioapics[apic].saved_registers is not NULL.
Fix the typo and address the resume hang regression reported by
Linus.
This was not found sooner because the systems where these
changes were tested on kept the IO-APIC entries intact over
resume.
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Daniel J Blueman <daniel.blueman@gmail.com>
Link: http://lkml.kernel.org/r/1306259131.7171.7.camel@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
James Morris [Tue, 24 May 2011 13:20:19 +0000 (23:20 +1000)]
Merge branch 'master' of git://git.infradead.org/users/eparis/selinux into for-linus
Conflicts:
lib/flex_array.c
security/selinux/avc.c
security/selinux/hooks.c
security/selinux/ss/policydb.c
security/smack/smack_lsm.c
Manually resolve conflicts.
Signed-off-by: James Morris <jmorris@namei.org>
James Morris [Tue, 24 May 2011 12:55:24 +0000 (22:55 +1000)]
Merge branch 'next' into for-linus
Richard Weinberger [Mon, 23 May 2011 22:18:05 +0000 (00:18 +0200)]
x86: Get rid of asmregparm
As UML does no longer need asmregparm we can remove it.
Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: namhyung@gmail.com
Cc: davem@davemloft.net
Cc: fweisbec@gmail.com
Cc: dhowells@redhat.com
Link: http://lkml.kernel.org/r/%3C1306189085-29896-1-git-send-email-richard%40nod.at%3E
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Richard Weinberger [Mon, 23 May 2011 20:51:33 +0000 (22:51 +0200)]
um: Use RWSEM_GENERIC_SPINLOCK on x86
Commit d12337 (rwsem: Remove redundant asmregparm annotation)
broke rwsem on UML.
As we cannot compile UML with -mregparm=3 and keeping asmregparm only
for UML is inadequate the easiest solution is using RWSEM_GENERIC_SPINLOCK.
Thanks to Thomas Gleixner for the idea.
Reported-by: Toralf Förster <toralf.foerster@gmx.de>
Tested-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: <stable@kernel.org> # .39.x
Link: http://lkml.kernel.org/r/%3C1306183893-26655-1-git-send-email-richard%40nod.at%3E
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tejun Heo [Tue, 24 May 2011 07:59:36 +0000 (09:59 +0200)]
Merge branch 'fixes-2.6.39' into for-2.6.40
Dmitry Torokhov [Tue, 24 May 2011 07:06:26 +0000 (00:06 -0700)]
Merge branch 'next' into for-linus
Geert Uytterhoeven [Sat, 30 Apr 2011 21:15:07 +0000 (23:15 +0200)]
m68knommu: Use generic show_interrupts()
Apart from whitespace differences, /proc/interrupts doesn't change by
enabling GENERIC_IRQ_SHOW.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Steven King [Sun, 24 Apr 2011 17:48:07 +0000 (10:48 -0700)]
coldfire_qspi compile fix
The m68k/m68knommu merge broke the qspi build.
Signed-off-by: Steven King <sfking@fdwdc.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Thu, 21 Apr 2011 02:48:07 +0000 (12:48 +1000)]
m68k: merge the mmu and non-mmu versions of sys_m68k.c
There is a lot of common code in the sys_m68k.c files. The mmu and non-mmu
versions can easily be merged into a single file.
There is really only 2 functions that differ in the 2 cases. A single
ifdef on CONFIG_MMU can take care of this. Alternatively we could break
those 2 functions out and maintain sys_m68k_no.c and sys_m68k_mm.c with
just this code in it (Makefile could then just build the right one).
Does anyone have strong feelings on which way they want this done?
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Akinobu Mita [Sun, 17 Apr 2011 13:57:29 +0000 (22:57 +0900)]
m68knommu: use asm-generic/bitops/ext2-atomic.h
m68knommu can use generic implementation of ext2 atomic bitops.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Geert Uytterhoeven [Wed, 6 Apr 2011 19:43:19 +0000 (21:43 +0200)]
m68knommu: Remove obsolete #include <linux/sys.h>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Tue, 29 Mar 2011 05:55:36 +0000 (15:55 +1000)]
m68k: merge mmu and non-mmu versions of asm-offsets.c
It is strait forward to merge the mmu and non-mmu versions of
asm-offstes.c. Some name changes are required for the preempt and
thread_info.flags in the non-mmu entry.S assembler to make them
consistent for both setups.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Linus Torvalds [Tue, 24 May 2011 04:24:07 +0000 (21:24 -0700)]
Merge branch 'sh-latest' of git://git./linux/kernel/git/lethal/sh-2.6
* 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (23 commits)
sh: Ignore R_SH_NONE module relocations.
SH: SE7751: Fix pcibios_map_platform_irq prototype.
sh: remove warning and warning_symbol from struct stacktrace_ops
sh: wire up sys_sendmmsg.
clocksource: sh_tmu: Runtime PM support
clocksource: sh_tmu: __clocksource_updatefreq_hz() update
clocksource: sh_cmt: Runtime PM support
clocksource: sh_cmt: __clocksource_updatefreq_hz() update
dmaengine: shdma: synchronize RCU before freeing, simplify spinlock
dmaengine: shdma: add runtime- and system-level power management
dmaengine: shdma: fix locking
sh: sh-sci: sh7377 and sh73a0 build fixes
sh: cosmetic improvement: use an existing pointer
serial: sh-sci: suspend/resume wakeup support V2
serial: sh-sci: Runtime PM support
sh: select IRQ_FORCED_THREADING.
sh: intc: Set virtual IRQs as nothread.
sh: fixup fpu.o compile order
i2c: add a module alias to the sh-mobile driver
ALSA: add a module alias to the FSI driver
...
Linus Torvalds [Tue, 24 May 2011 04:20:48 +0000 (21:20 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf tools: Fix sample type size calculation in 32 bits archs
profile: Use vzalloc() rather than vmalloc() & memset()
Linus Torvalds [Tue, 24 May 2011 04:12:49 +0000 (21:12 -0700)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (247 commits)
[media] gspca - sunplus: Fix some warnings and simplify code
[media] gspca: Fix some warnings tied to 'no debug'
[media] gspca: Unset debug by default
[media] gspca - cpia1: Remove a bad conditional compilation instruction
[media] gspca - main: Remove USB traces
[media] gspca - main: Version change to 2.13
[media] gspca - stk014 / t613: Accept the index 0 in querymenu
[media] gspca - kinect: Remove __devinitdata
[media] gspca - cpia1: Fix some warnings
[media] video/Kconfig: Fix mis-classified devices
[media] support for medion dvb stick 1660:1921
[media] tm6000: fix uninitialized field, change prink to dprintk
[media] cx231xx: Add support for Iconbit U100
[media] saa7134 add new TV cards
[media] Use a more consistent value for RC repeat period
[media] cx18: Move spinlock and vb_type initialisation into stream_init
[media] tm6000: remove tm6010 sif audio start and stop
[media] tm6000: remove unused exports
[media] tm6000: add pts logging
[media] tm6000: change from ioctl to unlocked_ioctl
...
Linus Torvalds [Tue, 24 May 2011 04:11:38 +0000 (21:11 -0700)]
Merge git://git./linux/kernel/git/hirofumi/fatfs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6:
fat: Fix statfs->f_namelen
fat: Replace all printk with fat_msg()
fat: Add fat_msg() function for preformated FAT messages
fat: Convert fat_fs_error to use %pV
fat: Fix possible null deref in fat_cache_add()
fat: use new setup() for ->dir_ops too
Guenter Roeck [Mon, 23 May 2011 21:05:38 +0000 (14:05 -0700)]
hwmon: (coretemp) Add comments describing the handling of HT CPUs
The coretemp driver provides a single set of device attributes for each
physical core of a HT CPU to avoid duplicate sensors. This
functionality was introduced with commit
d883b9f09772 ("hwmon:
(coretemp) Skip duplicate CPU entries").
Commit
e40cc4bdfd4b ("x86/hwmon: register alternate sibling upon CPU
removal") extends this functionality to register the HT sibling of a CPU
which is taken offline, to ensure that sensor attributes are provided if
at least one HT sibling of a core is online.
Add comments into the code describing the functionality in some more
detail.
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 24 May 2011 04:07:40 +0000 (21:07 -0700)]
kernel/watchdog.c: Use proper ANSI C prototypes
We try to enforce it by using -Wstrict-prototypes, but apparently they
sometimes get through. Introduced by
4eec42f39204 ("watchdog: Change
the default timeout and configure nmi watchdog period based").
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Frederic Weisbecker [Tue, 24 May 2011 01:31:26 +0000 (03:31 +0200)]
perf tools: Fix sample type size calculation in 32 bits archs
The shift used here to count the number of bits set in
the mask doesn't work above the low part for archs that
are not 64 bits.
Fix the constant used for the shift.
This fixes a 32-bit perf top failure reported by Eric Dumazet:
Can't parse sample, err = -14
Can't parse sample, err = -14
...
Reported-and-tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com
Link: http://lkml.kernel.org/r/1306200686-17317-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Greg Ungerer [Tue, 29 Mar 2011 05:06:37 +0000 (15:06 +1000)]
m68k: merge non-mmu and mmu versions of m68k_ksyms.c
After cleaning up m68k_ksyms_no.c it is now strait forward to merge
the non-mmu and mmu versions of m68k_ksyms.c. The need for the extra
gcc functions is not strictly based on having an MMU or not. It is
based on the family the processor belongs too, so use an appropriate
conditional check.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Tue, 29 Mar 2011 04:25:14 +0000 (14:25 +1000)]
m68knommu: remove un-needed exporting of COLDFIRE symbols
There is no reason most of the symbols enclosed in a conditional
on CONFIG_COLDFIRE need to be exported. And they sure don't need to
be doing it in m68k_ksyms_no.c. Move the dma symbols export (which
are currently needed) to the definitions of those, and remove the
rest of the exporting here.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Tue, 29 Mar 2011 04:14:21 +0000 (14:14 +1000)]
m68knommu: move EXPORT of kernel_thread to function definition
The EXPORT_SYMBOL(kernel_thread) belongs at the definition of that function,
not in some other random code file. So move it there.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Tue, 29 Mar 2011 04:10:23 +0000 (14:10 +1000)]
m68knommu: move EXPORT of local checksumming functions to definitions
The EXPORT_SYMBOL() of the local lib checksum functions belongs with
the definitions, not in some other random code file. So move then there.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Tue, 29 Mar 2011 04:03:26 +0000 (14:03 +1000)]
m68knommu: move EXPORT of dump_fpu to function definition
The EXPORT_SYMBOL(dump_fpu) belongs at the definition of the function,
not in some other random code file. So move it there.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Tue, 29 Mar 2011 03:39:47 +0000 (13:39 +1000)]
m68knommu: clean up mm/init_no.c
The memory initialization code for m68knommu has grown a bit crufty,
clean it up.
. remove unused declaration for die_if_kernel()
. remove un-needed declaration of free_initmem()
. removed unused definitions of empty_bad_page and empty_bad_page_table
. removed unused DEBUG code
. make free_initmem() proper prototype
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Greg Ungerer [Mon, 28 Mar 2011 12:38:48 +0000 (22:38 +1000)]
m68k: merge the mmu and non-mmu mm/Makefile
Its is trivial to megre the mmu and non-mmu arch/m68k/mm/Makefile's back
into a single file. So do it.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
projects / GitHub / exynos8895 / android_kernel_samsung_universal8895.git / log