[MTD] OneNAND: Clean up trailing white spaces

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] NAND: Clean up trailing white spaces

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] devices: Clean up trailing white spaces

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] maps: Clean up trailing white spaces

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] chips: Clean up trailing white spaces

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] user-abi: Clean up trailing white spaces

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] includes: Clean up trailing white spaces

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[LIB] reed_solomon: Clean up trailing white spaces

[JFFS2] Clean up trailing white spaces

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] core: Clean up trailing white spaces

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] chips cfi_cmdset_0002: Prevent timeout race

We've noticed that sometimes "MTD do_write_buffer(): software timeout"
message was printed out when writing to a Fujitsu NOR flash.
It turned out that this was because of a race in the timeout handling
do_write_buffer(). A small timeout of (HZ / 1000) + 1 is used there, and
sometimes if the timer interrupt handling takes more than one or even two
jiffies (which is 1-2 ms with HZ == 1000) and that interrupt happens just
after chip_ready() call, the driver bails out from a ready polling loop
despite the chip has actually become ready while all those interrupts were
handled. To deal with this issue, extra check for chip ready is neccessary on
timeout expiration (and the checks should better be reordered).
As do_write_oneword() uses the same approach, it needs to also be changed.

Signed-off-by: Konstantin Baidarov <kbaidarov@ru.mvista.com>
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] maps: Add support for the "TQM834x" Boards

The following patch adds support for the TQ Systems  TQM834x  Boards.
Verified on TQM8349L.

This is a resubmit after integrating the suggested changes.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] maps ixp2000: fix compile warnings in ixp2000 map driver

Fix two compile warnings that occur because of treating two
'unsigned long's as 'void *'s.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] NAND Kconfig: Simplify dependencies

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] maps/plat-ram: Avoid gcc 4.0 warning

The assignement of a "const char *" to a "char *" variable
is emitting a warning with gcc 4.0. We cannot change
mtd->name to "const char *" as we have dynamic assignements
of the name. So casting is the correct solution here

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] NAND: nand_write_ecc memory and OOB corruption

Nathan Roberts noticed the nand_write_ecc index into oobbuf goes out of
bounds when crossing an erase block boundary, causing incorrect OOB data
to be written and corrupting memory.  Reset the index to zero after
re-preparing oobbuf for a new erase block.

Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] NAND nand_base: Fix shift for bad block check (16bit devices only)

In case of an odd offset, the result was shifted by 1 instead of 8

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] OneNAND/Kconfig: Fix dependencies

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Revert "[PATCH] OneNAND: Add simulator"

This reverts 405c829f98d216925de00af2ee52f969f2c2891c commit.

[MTD] maps/Kconfig: Simplify and update dependencies

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] maps/ts5500: Fix partition support. Code cleanup

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] Tidy up Tims include cleanup

While we are at it, reorder the includes and
remove the silly /* TASK */ comment

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] maps/ixp4xx: kill some warnings

- Use map.virt instead of map.map_priv_1 since it has the correct type.
- Use readw/writew instead of dereferencing an ioremap'd cookie.
- Remove an unused variable.

Signed-off-by: David Vrabel <dvrabel@arcom.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] NAND sharpsl.c: Add support for akita and borzoi models

The Sharp Zaurus akita and borzoi models are large page flash devices.
This patch adds support for them to the sharpsl MTD NAND driver but
keeps the oob layout and bad block positions compatible with the Sharp
Zaurus 2.4 kernel and ROM bootloader.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] chips/cfi_cmdset_0001: fix for P30 cfi parsing

Change to the extended cfi table parsing for Intel NOR flash that uses
the info in the extended table to 'walk' the table rather than using
hard coding for various primary extended query table version numbers.

From: Jared Hulbert <jaredeh@gmail.com>
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Fix broken compile when debug level = 2

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] NAND s3c2410.c: Fix timing calculation bugs

Spotted by basprog@mail.ru

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Return 0, not number of bytes written, for success at commit_write

Some callers to block-layer commit_write function treat non-zero return as
error, notably the loopback mount driver sometimes used in conjunction with
JFFS2 on NAND flash for bad block avoidance, etc.  Return zero for success
as do various other commit_write functions.

Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] Don't let gcc inline functions marked __xipram

If they get inlined into non __xipram functions we're screwed.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] NAND s3c2410.c: Fix missing dev parameter to dev_err

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] maps/plat-ram.c: Initialize owner in device_driver struct

Added .owner initialisation to allow the
tracking of the device_driver owners when
built as a module

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] maps/bast-flash.c: Initialize owner in device_driver struct

Added owner to device driver field for tracking
when loaded as a module.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] NAND: s3c2410.c Initialize owner in device_driver struct

Added owner fields to the device_driver for tracking
ownership when built as a module

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] mtdpart.c: Allow eraseblock size != power of 2

Don't assume eraseblock size is power of 2.
Dataflash can have aligned eraseblock size.

From: Peter Menzebach <pm-mtd@mw-itcon.de>
Acked-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Fix dataflash support

- assume wbuf may be of size which is not power of 2
- don't make strange assumption about not padding wbuf for DataFlash
- use wbuf = DataFlash page and eraseblock >= 8 Dataflash pages

From: Peter Menzebach <pm-mtd@mw-itcon.de>
Acked-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] OneNAND: Enhanced support for DDP (Dual Densitiy Packages)

Add density mask for better support of DDP chips.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] OneNAND: Power Management (PM) support

Add suspend/resume

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Use memset(struct) instead of nulling struct members one by one

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Remove stale comment

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] OneNAND: Add missing files

Simple bad block table source and header files

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] NAND: s3c2410 use dev_err() to report errors instead of printk()

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Rename jffs2_summary_node to jffs2_raw_summary

Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] NAND: Alchemy board driver cleanup

- cleaned up the partitions and include files
- added more flexible CS and address detection and setup

Regression tested on db1200 and db1550.

Signed-off-by: Pete Popov <ppopov@pacbell.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Debug code simplification, update TODO

Simplify the debugging code further.
Update the TODO list

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] maps: Add support for MTX-1 Flash device

Add support for "4G Systems MTX-1 Flash device", better known as meshcube.

From: Bruno Randolf <bruno.randolf@4g-systems.biz>
Signed-off-by: Joern Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Account summary space in reserved_size.

Always keep valid data in reserved_size.

It did not cause problems, but the reservation code was unoptimal
when centralized summary was active or the size of the erase block
was very small.

Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] NAND: Add suspend/resume functionality

The changes introduced allow to suspend/resume NAND flash.
A new state (FL_PM_SUSPENDED) is introduced, as well as
routines for mtd->suspend and mtd->resume to put the flash in
suspended state from software pov.

Signed-off-by: Vitaly Wool <vwool@ru.mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] maps: Add mapping driver for PQ2FADS boards.

From: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Debug message format clean up

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Call summary collector for all mtd devices with writev support

Do the summary collection in the right place. If the device
was not writebuffered but had c->mtd->writev function
(e.g. blkmtd) the summary collector function was not called.

Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

OneNAND: Remove OMAP platform driver

Now we can use the generic platform driver

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] OneNAND: Add generic platform driver

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] maps/ixp4xx: remove platform specific bits

- Intel chip driver has a reboot notifier so no need to reset the chip here.
- Don't play with chip selects (platform code should do this if necessary).

Signed-off-by: David Vrabel <dvrabel@arcom.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Return real jffs2_sum_init() error code

Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Add erase block summary support (mount time improvement)

The goal of summary is to speed up the mount time. Erase block summary (EBS)
stores summary information at the end of every (closed) erase block. It is
no longer necessary to scan all nodes separetly (and read all pages of them)
just read this "small" summary, where every information is stored which is
needed at mount time.

This summary information is stored in a JFFS2_FEATURE_RWCOMPAT_DELETE. During
the mount process if there is no summary info the orignal scan process will
be executed. EBS works with NAND and NOR flashes, too.

There is a user space tool called sumtool to generate this summary
information for a JFFS2 image.

Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] OneNAND: Remove experimental Kconfig dependency

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[PATCH] OneNAND: Fix bug in write verify

- Remove unused block, page parameters
- Add constant instead of runtime value

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[PATCH] OneNAND: Add simulator

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[PATCH] OneNAND: Update OMAP OneNAND mapping using device driver model

- Update OMAP OneNAND mapping file using device driver model
- Remove board specific macro and values.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[PATCH] OneNAND: Simple Bad Block handling support

Based on NAND memory bad block table code

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[PATCH] OneNAND: Sync. Burst Read support

Add OneNAND Sync. Burst Read support
Tested with OMAP platform

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] Add initial support for OneNAND flash chips

OneNAND is a new flash technology from Samsung with integrated SRAM
buffers and logic interface.

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Remove support for virtual blocks

Remove support for virtual blocks, which are build by
concatenation of multiple physical erase blocks.

For more information please read the MTD mailing list thread
"[PATCH] remove support for virtual blocks"

Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Solve BUG caused by frag->node representing a hole in fragtree

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Calculate CRC check starting point correctly

When data starts from the beginning of NAND page, 'len' must be zero, not
c->wbuf_page.

Thanks to Zoltan Sogor for reporting this problem.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] More message formatting cleanups

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Fix JFFS2 [mc]time handling

From: David Woodhouse <dwmw2@infradead.org>

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Make the JFFS2 messages a bit nicer

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] NAND: Use correct mask for OOB size calculation

The bit mask used for oob size calculation was using 2 bits instead
of one. Fortunately the next bit has been 0 all the time.

Thanks to Nathan H. for pointing this out

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] Remove deprecated power management functions

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] Missing check on kmalloc return in INFTL mount.

Signed-off-by: Youssef Hmamouche <hyoussef@gmail.com>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Teach JFFS2 about Sibley flash

Intels Sibley flash needs JFFS2 write buffer functionality

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] writev support for cfi-cmdset-0001

While this might be useful for all supported flash types, it is mandatory
for proper JFFS2 support with Sibley flash.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

{MTD] add support for Intel's "Sibley" flash

This updates the Primary Vendor-Specific Extended Query parsing to
version 1.4 in order to get the information about the Configurable
Programming Mode regions implemented in the Sibley flash, as well as
selecting the appropriate write command code.

This flash does not behave like traditional NOR flash when writing data.
While mtdblock should just work, further changes are needed for JFFS2 use.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] cleanups to cfi_cmdset_0001

This includes improved error handling/reporting plus some other
message cleanups.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[MTD] Add Resident Flash Disk (RFD) support

This type of flash translation layer (FTL) is used by the Embedded BIOS
by General Software. It is known as the Resident Flash Disk (RFD), see:

http://www.gensw.com/pages/prod/bios/rfd.htm

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Debug code clean up - step 7

Remove more noisy debugs. Add current->pid to debug messages.
Remove bogus includes.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Correct buggy length checks

The previous changes introduced wrong length calculations.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Debug code clean up - step 6

Remove extra noisy debugs

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Build fragtree in reverse order

Instead of building fragtree starting from node with the smallest version
number, start from the highest. This helps to avoid reading and checking
obsolete nodes.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Refine fragtree debug macros

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Move another fragtree-related function to nodelist.c

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Fix up new debug code for eCos build

The debug code cleanup broke the eCos build.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Debug code clean up - step 5

Replace the D1(printk()) style debugging with the new debug macros

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Move scattered function into related files

Move functions to read inodes into readinode.c
Move functions to handle fragtree and dentry lists into nodelist.[ch]

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Debug code clean up - step 4

Small comment cleanups. Remove a unused macro

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[jffs2] Remove compressor lzo and lzari

Remove unused compressor code

Signed-off-by: Ferenc Havasi <havasi@inf.u-szeged.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Namespace clean up

Rename functions to a name matching the functionality.
Remove stall debug code

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Debug code clean up - step 3

Various simplifiactions. printk format corrections.
Convert more code to use the new debug functions.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Fix slab panic

When JFFS22 is unable to read the root inode, the bad root inode object is not
freed and remains sticked in the jffs2_i slab cache. When we further try to
free the slab cache (e.g., on rmmod jffs2), slab allocator subsystem panics.
Fix this bug.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Debug code clean up - step 2

If debugging is disabled, define debugging functions as empty macros, instead
of using Dx() explicitly.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Use f->target instead of f->dents for symlink target

JFFS2 uses f->dents to store the pointer to the symlink target string (in case
the inode is symlink). This is somewhat ugly to use the same field for
different reasons. Introduce distinct field f->target for this purpose.
Note, f->fragtree, f->dents, f->target may probably be put in a union.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Debug code clean up - step 1

Move debug functions into a seperate source file

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

[JFFS2] Split a large routine on several smaller.

Signed-off-by: Artem B. Bityutskiy <dedekind@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Merge branch 'master' of /home/tglx/work/mtd/git/linux-2.6.git/

[PATCH] nvidiafb: Geforce 7800 series support added

This adds support for the Nvidia Geforce 7800 series of cards to the
nvidiafb framebuffer driver.  All it does is add the PCI device id for
the 7800, 7800 GTX, 7800 GO, and 7800 GTX GO cards to the module device
table for the nvidiafb.ko driver, so that nvidiafb.ko will actually work
on these cards.

I also added the relevant PCI device ids to linux/pci_ids.h

I tested it on my 7800 GTX here and it works like a charm.  I now can
get framebuffer support on this card! Woo hoo!! Nothing like 200x75 text
mode to make your eyes BLEED.  ;)

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge branch 'srp' of /linux/kernel/git/roland/infiniband

Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband

Merge /linux/kernel/git/paulus/powerpc-merge

powerpc: Fix vmlinux.lds.S for 32-bit

We can't currently use asm-ppc/page.h in vmlinux.lds.S, so until
we have a merged page.h, define PAGE_SIZE and KERNELBASE locally.
Also gets rid of some dynamic executable cruft that we had for
32-bit.  With -Ttext=$(KERNELBASE) this didn't cause any problem,
but when we changed to putting . = KERNELBASE in the vmlinux.lds.S
this cruft caused the text to get linked at 0xa0 instead of
0xc0000000.  Oops.

Signed-off-by: Paul Mackerras <paulus@samba.org>