Artem Bityutskiy [Mon, 2 Jan 2012 11:52:14 +0000 (13:52 +0200)]
logfs: do not use 'mtd->block_isbad' directly
Instead, use the new 'mtd_can_have_bb()' helper.
Cc: Jörn Engel <joern@logfs.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Mon, 2 Jan 2012 11:48:54 +0000 (13:48 +0200)]
mtd: introduce mtd_can_have_bb helper
This patch introduces new 'mtd_can_have_bb()' helper function which checks
whether the flash can have bad eraseblocks. Then it changes all the
direct 'mtd->block_isbad' use cases with 'mtd_can_have_bb()'.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 30 Dec 2011 15:15:59 +0000 (17:15 +0200)]
mtd: do not use mtd->suspend and mtd->resume directly
Just call the 'mtd_suspend()' and 'mtd_resume()' - they will do nothing
if the operation is not defined.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 30 Dec 2011 15:00:35 +0000 (17:00 +0200)]
mtd: do not use mtd->lock, unlock and is_locked directly
Instead, call the corresponding MTD API function which will return
'-EOPNOTSUPP' if the operation is not supported.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 30 Dec 2011 14:35:35 +0000 (16:35 +0200)]
mtd: do not use mtd->sync directly
This patch teaches 'mtd_sync()' to do nothing when the MTD driver does
not have the '->sync()' method, which allows us to remove all direct
'mtd->sync' accesses.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 30 Dec 2011 14:23:41 +0000 (16:23 +0200)]
mtd: harmonize mtd_writev usage
This patch makes the 'mtd_writev()' function more usable and logical. We first
teach it to fall-back to the 'default_mtd_writev()' function if the MTD driver
does not define its own '->writev()' method. Then we make block2mtd and JFFS2
just 'mtd_writev()' instead of 'default_mtd_writev()' function. This means we
can now stop exporting 'default_mtd_writev()' and instead, export
'mtd_writev()'. This is much cleaner and more logical, as well as allows us to
get read of another direct 'mtd->writev' access in JFFS2.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Thu, 29 Dec 2011 08:45:04 +0000 (10:45 +0200)]
mtd: do not use mtd->lock_user_prot_reg directly
Instead, check the -EOPNOTSUPP return code of 'mtd_lock_user_prot_reg()'.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Thu, 29 Dec 2011 08:39:20 +0000 (10:39 +0200)]
mtd: mtd->write_user_prot_reg directly
Instead, just call 'mtd_write_user_prot_reg()' and check the '-EOPNOTSUPP' return
code.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Thu, 29 Dec 2011 08:06:32 +0000 (10:06 +0200)]
mtd: do not use mtd->read_*_prot_reg directly
Instead, call 'mtd_read_*_prot_info()' and check for -EOPNOTSUPP.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Wed, 28 Dec 2011 16:47:46 +0000 (18:47 +0200)]
mtd: do not use mtd->get_*_prot_info directly
Instead, call 'mtd_get_*_prot_info()' and check for '-EOPNOTSUPP'. While
on it, fix the return code from '-EOPNOTSUPP' to '-EINVAL' for the case
when the mode parameter is invalid.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Wed, 28 Dec 2011 15:50:34 +0000 (17:50 +0200)]
mtd: do not use mtd->read_oob directly
Instead of checking whether 'mtd->read_oob' is defined, just call
'mtd_read_oob()' and handle the '-EOPNOTSUPP' error which will be returned
if the function is undefined.
Additionally, make 'mtd_write_oob()' return '-EOPNOTSUPP' if the function
is undefined.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Wed, 28 Dec 2011 15:27:18 +0000 (17:27 +0200)]
mtd: mtdoops: do not use mtd->panic_write directly
Instead of checking if 'mtd->panic_write' is defined, call 'mtd_panic_write()'
and check the error code - '-EOPNOTSUPP' will be returned if the function is
not defined.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Wed, 28 Dec 2011 15:08:03 +0000 (17:08 +0200)]
romfs: do not use mtd->get_unmapped_area directly
Remove direct usage of mtd->get_unmapped_area. Instead, just call
'mtd_get_unmapped_area()' which will return -EOPNOTSUPP if the function
is not implemented, and then test for this code.
We also translate -EOPNOTSUPP to -ENOSYS because this return code is
probably part of the kernel ABI which we do not want to break.
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 30 Dec 2011 12:31:57 +0000 (14:31 +0200)]
mtd: do not use mtd->get_unmapped_area directly
Remove direct usage of mtd->get_unmapped_area. Instead, just call
'mtd_get_unmapped_area()' which will return -EOPNOTSUPP if the function
is not implemented and test for this error code.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Wed, 28 Dec 2011 13:55:42 +0000 (15:55 +0200)]
mtd: do use mtd->point directly
Remove direct usage of the "mtd->point" function pointer. Instead,
test the mtd_point() return code for '-EOPNOTSUPP'.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Wed, 28 Dec 2011 16:35:07 +0000 (18:35 +0200)]
mtd: introduce mtd_has_oob helper
We are working in the direction of making sure that MTD clients to not
use 'mtd->func' pointers directly. In some places we want to know if
OOB operations are supported by an MTD device. Introduce 'mtd_has_oob()'
helper for these purposes.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 30 Dec 2011 14:11:14 +0000 (16:11 +0200)]
mtd: mtdcore: export symbols cleanup
The mtdcore.c file is a bit inconsistent - some EXPORT_SYMBOL_GPL declarations
follow the corresponding functions, some are placed at the end. This patch
harmonizes the file so that EXPORT_SYMBOL_GPL declarations follow the
corresponding function.
It also removes few extra newlines and trailing white-spaces.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 30 Dec 2011 13:57:25 +0000 (15:57 +0200)]
mtd: clean-up the default_mtd_writev function
1. Teach 'mtd_write()' function to return '-EROFS' if the write method
is undefined, and remove the corresponding check from
'default_mtd_writev()'.
2. Do not test 'retlen' for NULL - it cannot be NULL.
3. Few minor coding stile clean-ups.
4. Add a kerneldoc comment
Additionally, minor fixes to the kerneldoc comments of the neighbor function.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 30 Dec 2011 13:48:55 +0000 (15:48 +0200)]
jffs: remove custom mtd_fake_writev function
Instead, use 'default_mtd_writev()' function which MTD provides.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 30 Dec 2011 13:46:40 +0000 (15:46 +0200)]
mtd: remove unused default_mtd_readv prototype
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Thu, 29 Dec 2011 16:06:01 +0000 (18:06 +0200)]
mtd: sst25l: kill unused variable
Fix the following gcc warning:
drivers/mtd/devices/sst25l.c: In function ‘sst25l_probe’:
drivers/mtd/devices/sst25l.c:381:11: warning: unused variable ‘i’ [-Wunused-variable]
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Thu, 29 Dec 2011 16:04:31 +0000 (18:04 +0200)]
mtd: onenand: kill unused variable
Fix this gcc warning:
drivers/mtd/onenand/onenand_base.c: In function ‘onenand_block_markbad’:
drivers/mtd/onenand/onenand_base.c:2636:23: warning: unused variable ‘this’ [-Wunused-variable]
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Thu, 29 Dec 2011 16:00:29 +0000 (18:00 +0200)]
mtd: kill dev_to_mtd helper
... since it is not needed because the generic 'dev_get_drvdata()' can be
used instead.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Thu, 29 Dec 2011 13:16:28 +0000 (15:16 +0200)]
mtd: remove extra retlen assignment
MTD functions always assign the 'retlen' argument to 0 at the very
beginning - the callers do not have to do this.
I used the following semantic patch to find these places:
@@
identifier retlen;
expression a, b, c, d, e;
constant C;
type T;
@@
(
- retlen = C;
|
T
-retlen = C
+ retlen
;
)
... when != retlen
when exists
(
mtd_read(a, b, c, &retlen, d)
|
mtd_write(a, b, c, &retlen, d)
|
mtd_panic_write(a, b, c, &retlen, d)
|
mtd_point(a, b, c, &retlen, d, e)
|
mtd_read_fact_prot_reg(a, b, c, &retlen, d)
|
mtd_write_user_prot_reg(a, b, c, &retlen, d)
|
mtd_read_user_prot_reg(a, b, c, &retlen, d)
|
mtd_writev(a, b, c, d, &retlen)
)
I ran it twice, because there were cases of double zero assigments
in mtd tests. Then I went through the patch to verify that spatch
did not find any false positives.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Wed, 28 Dec 2011 16:14:49 +0000 (18:14 +0200)]
mtd: always initialize retlen to zero
Make sure that the retlen is set to 0 in case of error. This harmonizes
drivers - some set it to 0 in some error cases and do not write anything
in other error cases. Now we can do this consistently for all drivers.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Thu, 29 Dec 2011 09:40:00 +0000 (11:40 +0200)]
mtd: doc: do not initialize mtd_info fields to 0 or NULL
The 'struct mtd_info' object is allocated with 'kzalloc()', so it
contains only zeroes - no need to initialize various fields to 0 or
NULL.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Thu, 29 Dec 2011 09:36:19 +0000 (11:36 +0200)]
mtd: docprobe: use kzalloc instead
Instead of calling 'kmalloc()' and them 'memeset(0)', use 'kzalloc()'.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Thu, 29 Dec 2011 09:06:10 +0000 (11:06 +0200)]
mtd: move mtd->{get,put}_device functions up
Move the 'get_device()' and 'put_device()' functions up within
'struct mtd_info' to make them be close to other functions.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 17:37:38 +0000 (19:37 +0200)]
mtd: introduce mtd_block_markbad interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 17:35:30 +0000 (19:35 +0200)]
mtd: introduce mtd_block_isbad interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 17:31:25 +0000 (19:31 +0200)]
mtd: introduce mtd_resume interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 17:25:16 +0000 (19:25 +0200)]
mtd: introduce mtd_suspend interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 17:21:16 +0000 (19:21 +0200)]
mtd: introduce mtd_is_locked interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 17:18:22 +0000 (19:18 +0200)]
mtd: introduce mtd_unlock interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 17:15:39 +0000 (19:15 +0200)]
mtd: introduce mtd_lock interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 17:03:12 +0000 (19:03 +0200)]
mtd: introduce mtd_sync interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 16:59:12 +0000 (18:59 +0200)]
mtd: introduce mtd_writev interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 16:55:49 +0000 (18:55 +0200)]
mtd: introduce mtd_lock_user_prot_reg interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 16:50:04 +0000 (18:50 +0200)]
mtd: introduce mtd_write_user_prot_reg interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 16:47:59 +0000 (18:47 +0200)]
mtd: introduce mtd_read_user_prot_reg interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 16:45:11 +0000 (18:45 +0200)]
mtd: introduce mtd_get_user_prot_info interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 16:40:06 +0000 (18:40 +0200)]
mtd: introduce mtd_read_fact_prot_reg interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 16:33:28 +0000 (18:33 +0200)]
mtd: introduce mtd_get_fact_prot_info interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 16:29:55 +0000 (18:29 +0200)]
mtd: introduce mtd_write_oob interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 16:27:05 +0000 (18:27 +0200)]
mtd: introduce mtd_read_oob interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 16:03:17 +0000 (18:03 +0200)]
mtd: introduce mtd_panic_write interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 15:35:41 +0000 (17:35 +0200)]
mtd: introduce mtd_write interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 15:30:16 +0000 (17:30 +0200)]
mtd: introduce mtd_read interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 15:10:15 +0000 (17:10 +0200)]
mtd: introduce mtd_get_unmapped_area interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 15:05:52 +0000 (17:05 +0200)]
mtd: introduce mtd_unpoint interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 15:00:37 +0000 (17:00 +0200)]
mtd: introduce mtd_point interface
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 13:25:39 +0000 (15:25 +0200)]
mtd: introduce mtd_erase interface
This patch is part of a patch-set which changes the MTD interface
from 'mtd->func()' form to 'mtd_func()' form. We need this because
we want to add common code to to all drivers in the mtd core level,
which is impossible with the current interface when MTD clients
call driver functions like 'read()' or 'write()' directly.
At this point we just introduce a new inline wrapper function, but
later some of them are expected to gain more code. E.g., the input
parameters check should be moved to the wrappers rather than be
duplicated at many drivers.
This particular patch introduced the 'mtd_erase()' interface. The
following patches add all the other interfaces one by one.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 15:27:46 +0000 (17:27 +0200)]
mtd: mtdchar: rename functions
We are going to re-work the MTD interface and change 'mtd->write()' to
'mtd_write()', 'mtd->read()' to 'mtd_read()' and so forth for all functions
in the 'struct mtd_info' structure.
However, mtdchar.c has its own 'mtd_read()', 'mtd_write()', etc functions
which collide with our changes. This patch renames these functions
to 'mtdchar_read()', 'mtdchar_write()', etc.
Additionally, to make the 'mtdchar.c' file look consistent, rename
similarly all the other functions starting with 'mtd_'.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 23 Dec 2011 13:44:14 +0000 (15:44 +0200)]
logfs: rename functions starting with mtd_
We are going to re-work the MTD interface and change 'mtd->write()' to
'mtd_write()', 'mtd->read()' to 'mtd_read()' and so forth for all functions
in the 'struct mtd_info' structure.
However, logfs has its own 'mtd_read()', 'mtd_write()', etc functions
which collide with our changes. This patch renames these logfs functions
to 'logfs_mtd_read()', 'logfs_mtd_write()', etc.
Additionally, to make the 'fs/logfs/dev_mtd.c' file look consistent, rename
similarly all the other functions starting with 'mtd_'.
Cc: Jörn Engel <joern@logfs.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Tue, 27 Dec 2011 15:59:04 +0000 (17:59 +0200)]
mtd: lpddr: drop unnecessary zeroing
We allocate the "mtd" structure using kzalloc which means we do not have
to initialize unused MTD function pointers to NULL, since it is safe to
assume in Linux that NULL contains all zeroes.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Fri, 30 Dec 2011 16:28:01 +0000 (18:28 +0200)]
mtd: map.h: fix arm cross-build failure
This patch fixes the following build failure:
In file included from include/linux/mtd/qinfo.h:4:0,
from include/linux/mtd/pfow.h:7,
from drivers/mtd/lpddr/lpddr_cmds.c:27:
include/linux/mtd/map.h: In function 'inline_map_read':
include/linux/mtd/map.h:409:3: error: implicit declaration of function 'BUILD_BUG_ON' [-Werror=implicit-function-declaration]
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Julia Lawall [Tue, 27 Dec 2011 14:01:31 +0000 (15:01 +0100)]
mtd: txx9ndfmc: use devm_request_and_ioremap
Reimplement a call to devm_request_mem_region followed by a call to ioremap
or ioremap_nocache by a call to devm_request_and_ioremap.
The semantic patch that makes this transformation is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@nm@
expression myname;
identifier i;
@@
struct platform_driver i = { .driver = { .name = myname } };
@@
expression dev,res,size;
expression nm.myname;
@@
-if (!devm_request_mem_region(dev, res->start, size,
- \(res->name\|dev_name(dev)\|myname\))) {
- ...
- return ...;
-}
... when != res->start
(
-devm_ioremap(dev,res->start,size)
+devm_request_and_ioremap(dev,res)
|
-devm_ioremap_nocache(dev,res->start,size)
+devm_request_and_ioremap(dev,res)
)
... when any
when != res->start
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Julia Lawall [Mon, 26 Dec 2011 17:38:01 +0000 (18:38 +0100)]
mtd: lantiq-flash: drop iounmap for devm_ allocated data
Data allocated with devm_ioremap or devm_ioremap_nocache should not be
freed using iounmap, because doing so causes a dangling pointer, and a
subsequent double free.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
expression x;
@@
(
x = devm_ioremap(...)
|
x = devm_ioremap_nocache(...)
)
@@
expression r.x;
@@
* iounmap(x)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Jamie Iles [Sun, 18 Dec 2011 10:00:49 +0000 (10:00 +0000)]
mtd: gpio-nand: add device tree bindings
Add device tree bindings so that the gpio-nand driver may be
instantiated from the device tree. This also allows the partitions
to be specified in the device tree.
v7: - restore runtime device tree/non device tree detection
v6: - convert to mtd_device_parse_register()
v5: - fold dt config helpers into a single gpio_nand_of_get_config()
v4: - get io sync address from gpio-control-nand,io-sync-reg
property rather than a resource
- clarified a few details in the binding
v3: - remove redundant cast and a couple of whitespace/naming
changes
v2: - add CONFIG_OF guards for non-dt platforms
- compatible becomes gpio-control-nand
- clarify some binding details
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Jonas Gorski [Sat, 17 Dec 2011 12:58:18 +0000 (13:58 +0100)]
mtd: bcm63xxpart: check the image tag's crc32
Only use the values from the image tag if it is valid. Always create
the CFE, NVRAM and linux partitions, to allow flashing a new image even
if the old is invalid without overwriting CFE or NVRAM.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Jonas Gorski [Sat, 17 Dec 2011 12:58:17 +0000 (13:58 +0100)]
MIPS: BCM63XX: bcm963xx_tag.h: make crc fields integers
All CRC32 fields are 32 bit integers, so define them as such to prevent
unnecessary casts if we want to use them.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Jonas Gorski [Sat, 17 Dec 2011 12:58:16 +0000 (13:58 +0100)]
mtd: bcm63xxpart: don't assume NVRAM is always the fourth partition
Instead of referencing the sizes of fixed partitions, use the
precomputed CFE/NVRAM lengths.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Jonas Gorski [Mon, 19 Dec 2011 10:36:04 +0000 (11:36 +0100)]
mtd: bcm63xxpart: make sure CFE and NVRAM partitions are at least 64KiB
The CFE boot loader on BCM63XX platforms assumes itself and the NVRAM
partition to be 64 KiB (or erase block sized, if larger).
Ensure this assumption is also met when creating the partitions to
prevent accidential erasure of CFE or NVRAM.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Jonas Gorski [Sat, 17 Dec 2011 12:58:14 +0000 (13:58 +0100)]
mtd: bcm63xxpart: check version marker string for newer CFEs
Recent CFEs do not contain the
CFE1CFE1 magic anymore, so check for the
"cfe-v" version marker string instead. As very old CFEs do not have
this string, leave the
CFE1CFE1 magic as a fallback for detection.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Rusty Russell [Thu, 15 Dec 2011 03:05:49 +0000 (13:35 +1030)]
mtd: sm_ftl: fix module parameter
You didn't mean this to be a bool.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Fri, 16 Dec 2011 22:25:23 +0000 (23:25 +0100)]
mtd: docg3: remove unused function
As the MTD api has no use for the number of erase cycles
each block has endured, remove the function which calculated
that value.
If one day MTD api finds it usefull for wear levelling
algorithms to have this information, the function should be
put back in place.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Shengzhou Liu [Mon, 12 Dec 2011 09:40:53 +0000 (17:40 +0800)]
mtd: nand: Add ONFI support for FSL NAND controller
- fix NAND_CMD_READID command for ONFI detect.
- add NAND_CMD_PARAM command to read the ONFI parameter page.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Shengzhou Liu [Mon, 12 Dec 2011 09:40:52 +0000 (17:40 +0800)]
mtd: nand: fixup for fmr initialization of Freescale NAND controller
There was a bug for fmr initialization, which lead to fmr was always 0x100
in fsl_elbc_chip_init() and caused FCM command timeout before calling
fsl_elbc_chip_init_tail(), now we initialize CWTO to maximum timeout value
and not relying on the setting of bootloader.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Artem Bityutskiy [Mon, 12 Dec 2011 21:24:59 +0000 (23:24 +0200)]
mtd: document that MEMWRITE ioctl is NAND-specific
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Liu Shuo [Fri, 9 Dec 2011 09:42:54 +0000 (17:42 +0800)]
mtd: fsl_elbc_nand: set Nand flash page address to FBAR and FPAR correctly
If we use the Nand flash chip whose number of pages in a block is greater
than 64(for large page), we must treat the low bit of FBAR as being the
high bit of the page address due to the limitation of FCM, it simply uses
the low 6-bits (for large page) of the combined block/page address as the
FPAR component, rather than considering the actual block size.
Signed-off-by: Liu Shuo <b35362@freescale.com>
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Tang Yuantian <b29983@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Roman Tereshonkov [Tue, 29 Nov 2011 10:49:18 +0000 (12:49 +0200)]
mtdoops: fix the oops_page_used array size
The array of unsigned long pointed by oops_page_used is allocated
by vmalloc which requires the size to be in bytes.
BITS_PER_LONG is equal to 32.
If we want to allocate memory for 32 pages with one bit per page then
32 / BITS_PER_LONG is equal to 1 byte that is 8 bits.
To fix it we need to multiply the result by sizeof(unsigned long) equal to 4.
Cc: stable@kernel.org
Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Eric Sandeen [Tue, 6 Dec 2011 23:06:06 +0000 (17:06 -0600)]
jffs2: fix up error handling for insert_inode_locked
after
250df6ed274d767da844a5d9f05720b804240197
(fs: protect inode->i_state with inode->i_lock), insert_inode_locked()
no longer returns the inode with I_NEW set on failure. However,
the error handler still calls unlock_new_inode() on failure,
which does a WARN_ON if I_NEW is not set, so any failure spews
a lot of warnings.
We can just drop the unlock_new_inode() if insert_inode_locked()
fails here.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Jonas Gorski [Mon, 5 Dec 2011 15:08:11 +0000 (16:08 +0100)]
mtd: maps: remove the now unused bcm963xx-flash
bcm963xx-flash does nothing meaningful anymore.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Jonas Gorski [Mon, 5 Dec 2011 15:08:10 +0000 (16:08 +0100)]
MIPS: BCM63XX: use the new bcm63xxpart parser
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Jonas Gorski [Mon, 5 Dec 2011 15:08:09 +0000 (16:08 +0100)]
mtd: maps: physmap: allow partition parsers for physmap_flash_data
Arch setup code might want to use their own partition parsers, but still
use the generic physmap flash driver.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Jonas Gorski [Mon, 5 Dec 2011 15:08:08 +0000 (16:08 +0100)]
mtd: maps: bcm963xx-flash: make CFE partition parsing an mtd parser
Recent BCM63XX devices support a variety of flash types (parallel, SPI,
NAND) and share the partition layout. To prevent code duplication make
the CFE partition parsing code a stand alone mtd parser to allow SPI or
NAND flash drivers to use it.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Jonas Gorski [Mon, 5 Dec 2011 15:08:07 +0000 (16:08 +0100)]
mtd: maps: bcm963xx-flash: clean up printk usage
Replace raw printk's with their pr_XXX equivalent and unify broken up
strings so they become grepable.
Also replace the PFX definition with a pr_fmt().
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Jonas Gorski [Mon, 5 Dec 2011 15:08:06 +0000 (16:08 +0100)]
mtd: maps: bcm963xx-flash: remove superfluous semicolons
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Jonas Gorski [Mon, 5 Dec 2011 15:08:05 +0000 (16:08 +0100)]
mtd: maps: bcm963xx-flash: fix word order for spare partition
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Heiko Schocher [Sun, 4 Dec 2011 09:37:36 +0000 (10:37 +0100)]
mtd: davinci: if no amif timing is passed, don; t setup cscfg register
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Liu Shuo [Sun, 4 Dec 2011 04:31:37 +0000 (12:31 +0800)]
mtd: nand: set correct length to FBCR for a non-full-page write
When we do a non-full-page write, the length be set to FBCR should
not be 'elbc_fcm_ctrl->index', it should be 'elbc_fcm_ctrl->index -
elbc_fcm_ctrl->column'.
Signed-off-by: Liu Shuo <b35362@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Liu Shuo [Sun, 4 Dec 2011 04:31:36 +0000 (12:31 +0800)]
mtd: nand: use elbc_fcm_ctrl->oob to set FPAR_MS bit of FPAR
On both of large-page chip and small-page chip, we always should use
'elbc_fcm_ctrl->oob' to set the FPAR_LP_MS/FPAR_SP_MS bit of FPAR, don't
use a overflowed 'column' to set it.
Signed-off-by: Liu Shuo <b35362@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Fri, 2 Dec 2011 19:00:12 +0000 (20:00 +0100)]
mtd: docg3: fixes and cleanups
This patch takes into account checkpatch, sparse and ECC
comments.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Roman Tereshonkov [Fri, 2 Dec 2011 13:07:17 +0000 (15:07 +0200)]
mtd: mtdoops: skip reading initially bad blocks
Use block_isbad to check and skip the bad blocks reading.
This will allow to get rid of the read errors if bad blocks
are present initially.
Cc: stable@kernel.org
Signed-off-by: Roman Tereshonkov <roman.tereshonkov@nokia.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Wolfram Sang [Tue, 29 Nov 2011 14:34:08 +0000 (15:34 +0100)]
mtd: tests: stresstest: bail out if device has not enough eraseblocks
stresstest needs at least two eraseblocks. Bail out gracefully if that
condition is not met. Fixes the following 'division by zero' OOPS:
[ 619.100000] mtd_stresstest: MTD device size 131072, eraseblock size 131072, page size 2048, count of eraseblocks 1, pages per eraseblock 64, OOB size 64
[ 619.120000] mtd_stresstest: scanning for bad eraseblocks
[ 619.120000] mtd_stresstest: scanned 1 eraseblocks, 0 are bad
[ 619.130000] mtd_stresstest: doing operations
[ 619.130000] mtd_stresstest: 0 operations done
[ 619.140000] Division by zero in kernel.
...
caused by
/* Read or write up 2 eraseblocks at a time - hence 'ebcnt - 1' */
eb %= (ebcnt - 1);
Cc: stable@kernel.org
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Axel Lin [Sun, 27 Nov 2011 12:45:03 +0000 (20:45 +0800)]
mtd: convert drivers/mtd/* to use module_platform_driver()
This patch converts the drivers in drivers/mtd/* to use the
module_platform_driver() macro which makes the code smaller and a bit
simpler.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked by: Haojian Zhuang <haojian.zhuang@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Tue, 29 Nov 2011 22:16:35 +0000 (23:16 +0100)]
Documentation: add sysfs entries for mtd docg3 chips
Add documentation for MSystems disk-on-chip docg3 chips
sysfs entries, which enable and disable protection areas,
giving or disabling access to the chip's memory.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Dan Carpenter [Mon, 28 Nov 2011 13:53:13 +0000 (16:53 +0300)]
mtd: docg3: dereferencing an ERR_PTR() in docg3_probe()
If doc_probe_device() returned an ERR_PTR, then we accidentally saved
that to docg3_floors[floor] = mtd; which gets derefenced in the error
handling when we call doc_release_device().
I've reworked the error handling to take care of that and hopefully
make it a little simpler.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Lars-Peter Clausen [Thu, 24 Nov 2011 15:29:16 +0000 (16:29 +0100)]
mtd: Remove redundant spi driver bus initialization
In ancient times it was necessary to manually initialize the bus field of an
spi_driver to spi_bus_type. These days this is done in spi_driver_register(),
so we can drop the manual assignment.
The patch was generated using the following coccinelle semantic patch:
// <smpl>
@@
identifier _driver;
@@
struct spi_driver _driver = {
.driver = {
- .bus = &spi_bus_type,
},
};
// </smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:58 +0000 (16:02 +0100)]
mtd: docg3: add protection areas sysfs access
As each docg3 chip has 2 protection areas (DPS0 and DPS1),
and because theses areas can prevent user access to the chip
data, add for each floor the sysfs entries which insert the
protection key into the right DPS.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com>
Reviewed-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:57 +0000 (16:02 +0100)]
mtd: docg3: add fast mode
Docg3 chips can work in 3 modes : normal MLC mode, fast
mode and reliable mode. Normally, as docg3 is a MLC chip, it
should be configured to work in normal mode.
In both normal mode, each page is distinct. This
means that writing to page 12 of blocks 14,15 writes only to
that page, and reading from page 12 of blocks 14,15 reads
only from that page.
In reliable and fast modes, pages are coupled by pairs, and
are clones one of each other. This means that the available
capacity of the chip is halved. Pages are coupled in each
block, and page of index 2*n contains the same data as page
2*n+1 of the same block.
In fast mode, the reads occur a bit faster, but are a bit
less reliable that in normal mode.
When reading from page 2*n, the chip reads bytes from both
page 2*n and page 2*n+1, makes a logical and for each byte,
and returns the result. As programming a page means
"clearing bits", even if a bit was not cleared on one page
because the flash is worn out, the other page has the bit
cleared, and the result of the "AND" gives a correct result.
When writing to page 2*n, the chip writes data to both page
2*n and page 2*n+1.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com>
Reviewed-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:56 +0000 (16:02 +0100)]
mtd: docg3: add suspend and resume
Add functions to powerdown and powerup from suspend, in
order to save power.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com>
Reviewed-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:55 +0000 (16:02 +0100)]
mtd: docg3: add ECC correction code
Credit for discovering the BCH algorith parameters, and bit
reversing algorithm is to be give to Mike Dunn and Ivan
Djelic.
The BCH correction code relied upon the BCH library, where
all data and ECC is bit-reversed. The BCH library works
correctly when each input byte is bit-reversed, and
accordingly ECC output is also bit-reversed.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com>
Reviewed-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:54 +0000 (16:02 +0100)]
mtd: docg3: map erase and write functions
Map the developped write and erase functions into the mtd
structure.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com>
Reviewed-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:53 +0000 (16:02 +0100)]
mtd: docg3: add erase functions
Add erase capability to the docg3 driver. The erase block is
made of 2 physical blocks, as both share all 64 pages. That
makes an erase block of at least 64 kBytes.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com>
Reviewed-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:52 +0000 (16:02 +0100)]
mtd: docg3: add write functions
Add write capability to the docg3 driver. The writes are
possible on a single page (512 bytes + 16 bytes), even if
that page is split on 2 physical pages on 2 blocks (each on
one plane).
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com>
Reviewed-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:51 +0000 (16:02 +0100)]
mtd: docg3: add OOB buffer to device structure
Add OOB buffer area to store the OOB data until the actual
page is written, so that it can be completed by hardware ECC
generator.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com>
Reviewed-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:50 +0000 (16:02 +0100)]
mtd: docg3: add registers for erasing and writing
Add the required registers and commands to erase and write
flash pages / blocks.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com>
Reviewed-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:49 +0000 (16:02 +0100)]
mtd: docg3: add OOB layout to mtdinfo
Add OOB layout description for docg3, so that userspace can
use this information to setup the data for write_oob().
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com>
Reviewed-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Robert Jarzmik [Sat, 19 Nov 2011 15:02:48 +0000 (16:02 +0100)]
mtd: docg3: add multiple floor support
Add support for multiple floors, ie. cascaded docg3
chips. There might be 4 docg3 chips cascaded, sharing the
same address space, and providing up to 4 times the storage
capacity of a unique chip.
Each floor will be seen as an independant mtd device.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com>
Reviewed-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
projects / GitHub / LineageOS / android_kernel_samsung_universal7580.git / log