Andrew Vasquez [Thu, 9 Mar 2006 22:31:47 +0000 (14:31 -0800)]
[SCSI] qla2xxx: Remove legacy ISP6312 firmware loader.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
andrew.vasquez@qlogic.com [Thu, 9 Mar 2006 22:27:44 +0000 (14:27 -0800)]
[SCSI] qla2xxx: Correct FCAL login retry logic for ISP24xx.
ISP24XX FW does not support Mbx 0x74 ie Login Local Port.
Added the equivalent code for ISP24XX ie to relogin in non
fabric case for ISP24XX use login iocb.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
andrew.vasquez@qlogic.com [Thu, 9 Mar 2006 22:27:39 +0000 (14:27 -0800)]
[SCSI] qla2xxx: Further restrict ZIO mode support.
Only support ZIO mode 6 on specific ISP types.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
andrew.vasquez@qlogic.com [Thu, 9 Mar 2006 22:27:34 +0000 (14:27 -0800)]
[SCSI] qla2xxx: Add VPD sysfs attribute.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
andrew.vasquez@qlogic.com [Thu, 9 Mar 2006 22:27:29 +0000 (14:27 -0800)]
[SCSI] qla2xxx: Correct swing/emphasis settings on ISP24xx.
Reserved-bit 15 must set when updating the swing/emphasis values.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
andrew.vasquez@qlogic.com [Thu, 9 Mar 2006 22:27:24 +0000 (14:27 -0800)]
[SCSI] qla2xxx: NVRAM id-list updates.
Resync with latest NVRAM subsystem ID list.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
andrew.vasquez@qlogic.com [Thu, 9 Mar 2006 22:27:18 +0000 (14:27 -0800)]
[SCSI] qla2xxx: Consolidate ISP63xx handling.
As new 23xx firmware will accomidate ISP63xx types.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
andrew.vasquez@qlogic.com [Thu, 9 Mar 2006 22:27:13 +0000 (14:27 -0800)]
[SCSI] qla2xxx: Add ISP54xx support.
Chip is similar in form to our ISP24xx offering.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
andrew.vasquez@qlogic.com [Thu, 9 Mar 2006 22:27:08 +0000 (14:27 -0800)]
[SCSI] qla2xxx: Convert IS_QLA*() defines to bit-operations.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Dave Jones [Thu, 9 Mar 2006 15:21:27 +0000 (10:21 -0500)]
[SCSI] fix two leaks in scsi_alloc_sdev failure paths
If the scsi_alloc_queue or the slave_alloc calls in scsi_alloc_device fail,
we forget to release the locally allocated sdev on the failure path.
Coverity #609
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Ralf Baechle [Thu, 9 Mar 2006 14:35:13 +0000 (14:35 +0000)]
[SCSI] Make sgiwd93_detect and sgiwd93_detect static.
Nothing outside sgiwd93.c references them.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Alexey Dobriyan [Wed, 8 Mar 2006 08:14:37 +0000 (00:14 -0800)]
[SCSI] drivers/scsi/FlashPoint.c: don't use parenthesis with "return"
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Alexey Dobriyan [Wed, 8 Mar 2006 08:14:35 +0000 (00:14 -0800)]
[SCSI] drivers/scsi/FlashPoint.c: Lindent
It's much, much more readable now.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Alexey Dobriyan [Wed, 8 Mar 2006 08:14:34 +0000 (00:14 -0800)]
[SCSI] drivers/scsi/FlashPoint.c: untypedef struct SCCBcard
* struct SCCBcard => struct sccb_card
* PSCCBcard => struct sccb_card *
* SCCBCARD => struct sccb_card
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Alexey Dobriyan [Wed, 8 Mar 2006 08:14:33 +0000 (00:14 -0800)]
[SCSI] drivers/scsi/FlashPoint.c: untypedef struct NVRAMInfo
* struct NVRAMInfo => struct nvram_info
* PNVRamInfo => struct nvram_info *
* NVRAMINFO => struct nvram_info
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Alexey Dobriyan [Wed, 8 Mar 2006 08:14:31 +0000 (00:14 -0800)]
[SCSI] drivers/scsi/FlashPoint.c: untypedef struct SCCBMgr_tar_info
* struct SCCBMgr_tar_info => struct sccb_mgr_tar_info
* PSCCBMgr_tar_info => struct sccb_mgr_tar_info *
* SCCBMGR_TAR_INFO => struct sccb_mgr_tar_info
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Alexey Dobriyan [Wed, 8 Mar 2006 08:14:30 +0000 (00:14 -0800)]
[SCSI] drivers/scsi/FlashPoint.c: untypedef struct SCCBMgr_info
* struct SCCBMgr_info => struct sccb_mgr_info
* PSCCBMGR_INFO => struct sccb_mgr_info *
* SCCBMGR_INFO => struct sccb_mgr_info
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Alexey Dobriyan [Wed, 8 Mar 2006 08:14:29 +0000 (00:14 -0800)]
[SCSI] drivers/scsi/FlashPoint.c: untypedef struct _SCCB
* struct _SCCB => struct sccb
* PSCCB => struct sccb *
* SCCB => struct sccb
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Alexey Dobriyan [Wed, 8 Mar 2006 08:14:28 +0000 (00:14 -0800)]
[SCSI] drivers/scsi/FlashPoint.c: use standard fixed size types
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Alexey Dobriyan [Wed, 8 Mar 2006 08:14:27 +0000 (00:14 -0800)]
[SCSI] drivers/scsi/FlashPoint.c: remove ushort_ptr
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Alexey Dobriyan [Wed, 8 Mar 2006 08:14:26 +0000 (00:14 -0800)]
[SCSI] drivers/scsi/FlashPoint.c: remove ULONG
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Alexey Dobriyan [Wed, 8 Mar 2006 08:14:26 +0000 (00:14 -0800)]
[SCSI] drivers/scsi/FlashPoint.c: remove UINT
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Alexey Dobriyan [Wed, 8 Mar 2006 08:14:25 +0000 (00:14 -0800)]
[SCSI] drivers/scsi/FlashPoint.c: remove USHORT
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Alexey Dobriyan [Wed, 8 Mar 2006 08:14:24 +0000 (00:14 -0800)]
[SCSI] drivers/scsi/FlashPoint.c: remove UCHAR
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Alexey Dobriyan [Wed, 8 Mar 2006 08:14:23 +0000 (00:14 -0800)]
[SCSI] drivers/scsi/FlashPoint.c: remove trivial wrappers
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Alexey Dobriyan [Wed, 8 Mar 2006 08:14:22 +0000 (00:14 -0800)]
[SCSI] drivers/scsi/FlashPoint.c: remove unused things
* Remove unused #define's
* Remove unused typedefs.
* Remove prototypes for non-existing functions.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Rene Herman [Wed, 8 Mar 2006 08:14:20 +0000 (00:14 -0800)]
[SCSI] MODULE_ALIAS_{BLOCK,CHAR}DEV_MAJOR for drivers/scsi
Add device-major aliases in drivers/scsi, allowing kmod autoload:
MODULE_ALIAS_CHARDEV_MAJOR(SCSI_CHANGER_MAJOR)
MODULE_ALIAS_CHARDEV_MAJOR(OSST_MAJOR)
MODULE_ALIAS_CHARDEV_MAJOR(SCSI_TAPE_MAJOR)
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_CDROM_MAJOR)
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISKN_MAJOR)
Signed-off-by: Andrew Morton <akpm@osdl.org>
Acked-by: Kai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Hannes Reinecke [Wed, 8 Mar 2006 12:00:07 +0000 (13:00 +0100)]
[SCSI] aic79xx: Avoid renegotiation on inquiry
Because of some quirk in the SCSI spec the aic79xx driver chose to
force a renegotiation when sending an inquiry. This should better
be handled by the upper layers if required at all.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Hannes Reinecke [Wed, 8 Mar 2006 11:59:35 +0000 (12:59 +0100)]
[SCSI] aic79xx: use BIOS settings
This patch fixes the aic79xx driver to properly respond to BIOS
settings.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Hannes Reinecke [Wed, 8 Mar 2006 11:59:03 +0000 (12:59 +0100)]
[SCSI] aic79xx: Invalid Sequencer interrupt occured
On certain systems the driver seems to hit upon some
"scsi0: Invalid Sequencer interrupt occurred." problem and dumps card state.
According to Adaptec engineers this message is harmless. So as not to
confuse user we can as well disable the internal card state dump and
just print out the message itself.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Hannes Reinecke [Wed, 8 Mar 2006 11:58:16 +0000 (12:58 +0100)]
[SCSI] aic79xx: Update error recovery
This patch updates the error recovery. Routines for TARGET RESET
and ABORT COMMAND are split up as the logic is quite dissimilar.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Hannes Reinecke [Wed, 8 Mar 2006 11:57:28 +0000 (12:57 +0100)]
[SCSI] aic79xx: Remove dead code
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Hannes Reinecke [Wed, 8 Mar 2006 11:56:56 +0000 (12:56 +0100)]
[SCSI] aic79xx: use tcq functions
This patch converts aic79xx to use the midlayer-supplied tcq
functions.
We also set the queuedepth to '1' if tcq is disabled; the
aic79xx driver gets confused otherwise. Will set it back to
'2' once I figure out how to queue requests in the driver.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Hannes Reinecke [Wed, 8 Mar 2006 11:56:14 +0000 (12:56 +0100)]
[SCSI] aic79xx: remove qfrozen
This patch removes the need for platform_data->qfrozen.
We're now using complete() instead of semaphores thus
simplifying ahd_freeze_simq() quite a lot.
This also fixes some deadlocks in the recovery code (again).
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Smart [Tue, 7 Mar 2006 20:04:25 +0000 (15:04 -0500)]
[SCSI] lpfc 8.1.4 : Change version number to 8.1.4
Change version number to 8.1.4
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Smart [Tue, 7 Mar 2006 20:04:19 +0000 (15:04 -0500)]
[SCSI] lpfc 8.1.4 : Two misc fixes
Two misc fixes:
- Fix deadlock caused by return with host_lock held in lpfc_findnode_did
- Initialize all fields of the allocated mail box structure to zero.
Was causing some sysfs mailbox commands to fail immediately after load.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Smart [Tue, 7 Mar 2006 20:04:13 +0000 (15:04 -0500)]
[SCSI] lpfc 8.1.4 : Introduce lpfc_reset_barrier() function for resets on dual channel adapters
Introduce lpfc_reset_barrier() function for resets on dual channel adapters
Workaround for a hardware errata on dual channel asics. There is a
potential for the chip to lock up on a reset if a shared dma engine is in
use. The (ugly) work around requires a reset process which uses a mailbox
command to synchronize the independent channels prior to the reset to
avoid the issue. Unfortunately, the timing windows required to ensure this
workaround succeeds are very specific, meaning we can't release the cpu
during the barrier.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Smart [Tue, 7 Mar 2006 20:04:06 +0000 (15:04 -0500)]
[SCSI] lpfc 8.1.4 : Fixed a timer panic due to timer firing after freeing ndlp
Fixed a timer panic due to timer firing after freeing ndlp
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Smart [Tue, 7 Mar 2006 20:04:01 +0000 (15:04 -0500)]
[SCSI] lpfc 8.1.4 : Fixed RSCN handling when a PLOGI is in retry
Fixed RSCN handling when a PLOGI is in retry.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Smart [Tue, 7 Mar 2006 20:02:37 +0000 (15:02 -0500)]
[SCSI] lpfc 8.1.4 : Fix Discovery processing for NPorts that change their NPortId on the fly
Fix Discovery processing for NPorts that change their NPortId on the fly
due to a cable swap.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Vasily Averin [Sun, 5 Mar 2006 22:18:14 +0000 (23:18 +0100)]
[SCSI] i2o: fix memory leak in i2o_exec_lct_modified
i2o_exec_lct_modified() does not release memory allocated for work_struct.
Signed-off-by: Vasily Averin <vvs@sw.ru>
Although your patch is the same, i've rewritten it a little bit for
naming consistency in the I2O driver.
Acked-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Ralf Baechle [Fri, 3 Mar 2006 16:34:08 +0000 (16:34 +0000)]
[SCSI] wd33c93: Fix missing prototypes by including <linux/interrupt.h>.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Bottomley [Fri, 10 Mar 2006 03:06:36 +0000 (22:06 -0500)]
[SCSI] add missing transport_container_unregister in sas class
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Bottomley [Tue, 7 Mar 2006 20:53:40 +0000 (14:53 -0600)]
[SCSI] sr: partial revert of
24669f75a3231fa37444977c92d1f4838bec1233
The patch
[SCSI] SCSI core kmalloc2kzalloc
Has an incorrect piece in sr_ioctl.c; it changes buffer from kmalloc
to kzalloc, but then removes the clearing of the stack variable struct
packet_command. This, in turn leaves rubbish in the sense pointer
which the sr_do_ioctl() command then happily writes to ... oops.
Thanks to Mike Christie <michaelc@cs.wisc.edu> for spotting this.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Willem Riede [Sat, 11 Feb 2006 19:46:56 +0000 (14:46 -0500)]
[SCSI] osst: changes required to move forward to block request
On 02/07/2006 04:12:55 AM, Christoph Hellwig wrote:
> On Mon, Feb 06, 2006 at 08:02:21PM -0500, Willem Riede wrote:
>
> > But I will certainly help retire scsi_request. And anything else that is
> > needed to keep up with proper kernel style. Let me know what those are, if
> > you would? I'll start looking at how st has changed, and will be back with
> > any questions I may have.
>
> right now the above is the most urgent bit. What would be nice but not
> required is a conversion to the sense handling helpers, similar to what
> st got (aka using the *normalize_sense functions and then dealing with the
> parsed sense buffer instead of the raw sense data)
Ok, so here is my first take at satisfying this request.
Be warned, that beyond compiling, and checking that the new module
doesn't immediately blow up, there hasn't yet been a lot of testing.
But this should allow you to comment on the changes, and move forward
with dropping scsi_request from the kernel code.
Signed-off-by: Willem Riede <osst@riede.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Bottomley [Mon, 6 Mar 2006 16:20:56 +0000 (10:20 -0600)]
[SCSI] lpfc: minor syntax fixes
Stop gcc complaining about undefined variables
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 03:33:15 +0000 (22:33 -0500)]
[PATCH] lpfc 8.1.3: Change version number to 8.1.3
Change version number to 8.1.3
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 03:33:12 +0000 (22:33 -0500)]
[PATCH] lpfc 8.1.3: Fix polling mode panic
Fix polling mode panic
Cause: Race between interrupt driven and polling path in harvesting iocbs
from
the response ring.
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 03:33:10 +0000 (22:33 -0500)]
[PATCH] lpfc 8.1.3: Protect NPL lists with host lock
Protect NPL lists with host lock
Symptoms: lpfc_findnode_rpi and lpfc_findnode_did can be called
outside of the discovery thread context. We have to iterate
through the NPL lists under the host lock and all add/del
operations on those lists have to be done under host lock.
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 03:33:09 +0000 (22:33 -0500)]
[PATCH] lpfc 8.1.3: Fix deadlock in lpfc_fdmi_tmo_handler
Fix deadlock in lpfc_fdmi_tmo_handler
lpfc_fdmi_tmo_handler was calling lpfc_fdmi_cmd with the host_lock
held. lpfc_fdmi_cmd assumes the host_lock is released as it calls functions
that acquire the host_lock. lpfc_fdmi_tmo_handler acquired the host_lock to
protect access to work_hba_events. This was already checked in the worker
thread so we can remove that code completely and remove access to the
host_lock.
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 03:33:08 +0000 (22:33 -0500)]
[PATCH] lpfc 8.1.3: Fix performance when using multiple SLI rings
Fix performance when using multiple SLI rings
Currently the driver allocates all of its SLI command and response ring
entries to one primary ring. Other rings get little, or no, resources.
Allow more resources to be given to ring 1
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 03:33:06 +0000 (22:33 -0500)]
[PATCH] lpfc 8.1.3: Remove unused MBhostaddr from lpfc_sli structure
Remove unused MBhostaddr from lpfc_sli structure
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 03:33:05 +0000 (22:33 -0500)]
[PATCH] lpfc 8.1.3: PCI hrd_type should be obtained with pci_read_config_byte() macro
PCI hrd_type should be obtained with pci_read_config_byte() macro
Driver keys off of this field to report the proper adapter type.
The pci subsystem explicitly clears the multiport bit in the copy of
the field given the driver. Thus, to properly name the card, obtain it
from config space.
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 03:33:04 +0000 (22:33 -0500)]
[PATCH] lpfc 8.1.3: Derive supported speeds from LMT field in the READ_CONFIG
Derive supported speeds from LMT field in the READ_CONFIG
Driver was keying off internal cores. Use what the firmware reports instead.
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Bottomley [Sat, 4 Mar 2006 15:10:18 +0000 (09:10 -0600)]
[PATCH] convert aic94xx over to using the sas transport end device
Begin introducing the concept of sas remote devices that have an rphy
embedded. The first one (this) is a simple end device. All that an
end device really does is have port mode page parameters contained.
The next and more complex piece will be expander remote devices.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Bottomley [Thu, 2 Mar 2006 22:01:31 +0000 (16:01 -0600)]
[SCSI] make some sas class properties optional
aic94xx doesn't have a use for the bay or enclosure identifiers.
Also, I think it's not going to need a get_linkerrors(), so wire up
all of these exported properties as conditional on the underlying
function support.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Christoph Hellwig [Tue, 14 Feb 2006 17:46:22 +0000 (18:46 +0100)]
[SCSI] qla2xxx: use kthread_ API
Use the kthread_ API instead of opencoding lots of hairy code for kernel
thread creation and teardown.
Also switch from semaphore-based thread wakeup to wake_up_process.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-By: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Bottomley [Thu, 2 Mar 2006 20:12:56 +0000 (14:12 -0600)]
[SCSI] add 6.0 Gbit phy definitions to the sas transport class
I don't think these exist in silicon yet, but the aic94xx driver has a
register setting for them.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Bottomley [Wed, 1 Mar 2006 15:02:49 +0000 (09:02 -0600)]
[SCSI] mptspi: Add transport class Domain Validation
This is the first half of a patch to add the generic domain validation
to mptspi. It also creates a secondary "virtual" channel for raid
component devices since these are now exported with no_uld_attach.
What Eric and I would have really liked is to export all physical
components on channel 0 and all raid components on channel 1.
Unfortunately, this would result in device renumbering on platforms with
mixed RAID/Physical devices which was considered unacceptable for
userland stability reasons.
Still to be done is to plug back the extra parameter setting and DV
pieces on reset and hotplug.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:39 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Change version number to 8.1.2
Change version number to 8.1.2
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:38 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Modify RSCN handling to unregister rpis on lost FCP_TARGETs immediately
Modify RSCN handling to unregister rpis on lost FCP_TARGETs immediately
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:36 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Fix panic caused by HBA resets and target side cable pulls
Fix panic caused by HBA resets and target side cable pulls
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:35 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Fixed module parameter descriptions.
Fixed module parameter descriptions.
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:34 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Code cleanup of lpfc_mbx_cmpl_config_link
Code cleanup of lpfc_mbx_cmpl_config_link
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:32 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Allow turning on internal loop-back mode
Allow turning on internal loop-back mode
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:31 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Code style changes for Discovery code
Code style changes for Discovery code
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:30 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Make lpfc_els_rsp_rps_acc and lpfc_els_rsp_rpl_acc static
Make lpfc_els_rsp_rps_acc and lpfc_els_rsp_rpl_acc static
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:28 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Added support for FAN
Added support for FAN
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:27 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Add ERROR and WARM_START modes for diagnostic purposes.
Add ERROR and WARM_START modes for diagnostic purposes.
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:26 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Remove hba_list from struct lpfc_hba
Remove hba_list from struct lpfc_hba
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:24 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Correct use of the hostdata field in scsi_host
Correct use of the hostdata field in scsi_host
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:23 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Misc FC Discovery changes :
Misc FC Discovery changes :
- Added FC_BYPASSED_MODE statistic
- Corrected some log message data
- Fix up Discovery infrastructure to support FAN:
Allow Fabric entities to flow thru DSM
Fix up linkup/linkdown unregister login processing for Fabric entities
Clean up Discovery code
Utilize nodev_tmo for Fabric entities
- Use of 3 * ratov for CT handling timeouts
- Fix up DSM to make more appropriate decisions and clean up code.
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:21 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Add module parameter to limit number of outstanding commands per lpfc HBA
Add module parameter to limit number of outstanding commands per lpfc HBA
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:20 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Fixed a double insertion of mail box object to the SLI mailbox list.
Fixed a double insertion of mail box object to the SLI mailbox list.
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:19 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Fixed system panic in lpfc_sli_brdreset during dynamic add of LP11K
Fixed system panic in lpfc_sli_brdreset during dynamic add of LP11K
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:17 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Explicitly initialize the skip_post argument to lpfc_sli_send_reset
Explicitly initialize the skip_post argument to lpfc_sli_send_reset
on a ERATT interrupt.
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:16 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Fixed a race condition in the PLOGI retry logic.
Fixed a race condition in the PLOGI retry logic.
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:15 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Handling of ELS commands RRQ, RPS, RPL and LIRR correctly
Handling of ELS commands RRQ, RPS, RPL and LIRR correctly
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:13 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Remove unused SLI_IOCB_HIGH_PRIORITY
Remove unused SLI_IOCB_HIGH_PRIORITY
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:12 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Remove unreferenced cfg_fcp_bind_method from struct lpfc_hba
Remove unreferenced cfg_fcp_bind_method from struct lpfc_hba
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Jamie Wellnitz [Wed, 1 Mar 2006 00:25:11 +0000 (19:25 -0500)]
[SCSI] lpfc 8.1.2: Remove unused prototypes from lpfc_crtn.h
Remove unused prototypes from lpfc_crtn.h
Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Brian King [Wed, 22 Feb 2006 20:28:24 +0000 (14:28 -0600)]
[SCSI] scsi: Handle device_add failure in scsi_alloc_target
Fixes scsi to handle device_add failure in scsi_alloc_target.
Without this patch, if this call were to fail, we can oops
when we free the target.
Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Bottomley [Thu, 23 Feb 2006 20:27:18 +0000 (14:27 -0600)]
[SCSI] fix scsi process problems and clean up the target reap issues
In order to use the new execute_in_process_context() API, you have to
provide it with the work storage, which I do in SCSI in scsi_device and
scsi_target, but which also means that we can no longer queue up the
target reaps, so instead I moved the target to a state model which
allows target_alloc to detect if we've received a dying target and wait
for it to be gone. Hopefully, this should also solve the target
namespace race.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Bottomley [Thu, 23 Feb 2006 18:43:43 +0000 (12:43 -0600)]
[SCSI] add execute_in_process_context() API
We have several points in the SCSI stack (primarily for our device
functions) where we need to guarantee process context, but (given the
place where the last reference was released) we cannot guarantee this.
This API gets around the issue by executing the function directly if
the caller has process context, but scheduling a workqueue to execute
in process context if the caller doesn't have it.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Mike Christie [Wed, 22 Feb 2006 08:11:59 +0000 (02:11 -0600)]
[SCSI] don't call ips_eh_reset in ips_queue to avoid deadlock
When the locking was changed in the eh code ips_eh_reset was changed
so that it was a wraper around __ips_eh_reset and all ips_eh_reset
does is grab the host lock and then calls __ips_eh_reset.
In the queuecommand, ips_queue is called with the host_lock held so if
it calls ips_eh_reset we will have a problem. This patch just has
ips_queue call __ips_eh_reset.
Patch is only compile tested. I do not have the HW.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: Hammer, Jack <Jack_Hammer@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Al Viro [Thu, 23 Feb 2006 01:03:16 +0000 (02:03 +0100)]
[SCSI] scsi_lib: fix recognition of cache type of Initio SBP-2 bridges
Regardless what mode page was asked for, Initio INIC-14x0 and
INIC-2430 always return page 6 without mode page headers. Try to
recognise this as a special case in scsi_mode_sense and setting the
mode sense headers accordingly.
Signed-off-by: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Matthew Wilcox [Sun, 19 Feb 2006 03:52:31 +0000 (20:52 -0700)]
[SCSI] Improve message printing code
Fix a bug where we would consume one byte too many in the message
printing code.
Add support for 256-byte long messages.
Add support for the Modify Bidirectional Data Pointer message.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Alan Stern [Thu, 9 Feb 2006 20:26:18 +0000 (15:26 -0500)]
[SCSI] Recognize missing LUNs for non-standard devices
Some non-standard SCSI targets or protocols, such as USB UFI, report "no
LUN present" by setting the Peripheral Device Type to 0x1f and the
Peripheral Qualifier to 0 (not 3 as the standard requires) in the INQUIRY
response. This patch (as650b) adds a new target flag and code to
accomodate such targets.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Christoph Hellwig [Mon, 6 Feb 2006 14:40:45 +0000 (15:40 +0100)]
[SCSI] aic7xxx: semaphore to completion conversion
On Tue, Jan 31, 2006 at 06:20:18PM +0100, Christoph Hellwig wrote:
> switch eh_sem to a completion. due to wait_for_completion_timeout this
> also nicely simplifies the code. Unfortunately it's untested, so if
> someone with the hardware could give it a try that would be nice. Once
> it works the same thing can be applied to aic79xx.
New version that switches to the common onstack completion and just a
pointer in the platform_data struct idiom. This gets rid of all the
flags fiddling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Christoph Hellwig [Tue, 14 Feb 2006 17:45:06 +0000 (18:45 +0100)]
[SCSI] aacraid: use kthread_ API
Use the kthread_ API instead of opencoding lots of hairy code for kernel
thread creation and teardown.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Salyzyn, Mark <mark_salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
James Bottomley [Fri, 17 Feb 2006 22:58:47 +0000 (14:58 -0800)]
[SCSI] Add EXPORT_SYMBOL for spi msg functions
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Christoph Hellwig [Thu, 16 Feb 2006 12:31:47 +0000 (13:31 +0100)]
[SCSI] sas: add support for enclosure and bad ID rphy attributes
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Christoph Hellwig [Thu, 16 Feb 2006 12:25:36 +0000 (13:25 +0100)]
[SCSI] mptsas: add support for enclosure and bay identifier attributes
Adds support to retrieve the enclosure and bay identifiers. This patch
is from Eric with minor modifications from me, rewritten from a buggy
patch of mine, based on the earlier CSMI implementation from Eric..
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Ralf Baechle [Thu, 9 Feb 2006 16:16:27 +0000 (11:16 -0500)]
[SCSI] jazz_esp: Fix sparse warnings.
Using plain integer as NULL pointer.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Ralf Baechle [Thu, 9 Feb 2006 16:15:49 +0000 (11:15 -0500)]
[SCSI] jazz_esp: Delete useless prototype
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Matthew Wilcox [Tue, 7 Feb 2006 15:05:26 +0000 (08:05 -0700)]
[SCSI] Make spi_print_msg more consistent
Almost all the output from spi_print_msg() has a trailing space.
This patch fixes up the three cases that don't.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Matthew Wilcox [Tue, 7 Feb 2006 14:54:46 +0000 (07:54 -0700)]
[SCSI] Add spi_populate_*_msg functions
Introduce new helpers:
- spi_populate_width_msg()
- spi_populate_sync_msg()
- spi_populate_ppr_msg()
and use them in drivers which already enable the SPI transport.
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Matthew Wilcox [Fri, 17 Feb 2006 20:18:41 +0000 (13:18 -0700)]
[SCSI] ncr53c8xx update
Delete unused NAME53C definition
Remove use of the M_* constants; use the common SCSI constants instead
Translate some remaining German
Add a missing changelog entry
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Matthew Wilcox [Tue, 7 Feb 2006 15:01:02 +0000 (08:01 -0700)]
[SCSI] unused show_spi_transport_period_helper parameter
show_spi_transport_period_helper() doesn't need the class_device parameter
Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Matthew Wilcox [Sun, 5 Feb 2006 15:01:33 +0000 (08:01 -0700)]
[SCSI] fix uninitialized variable error
in __scsi_add_device, sdev may be uninitialised if
scsi_host_scan_allowed() returns false. Fix by initialising at the
top of the routine. Also rely on the fact that
scsi_probe_and_add_lun() only actually fills in the sdev pointer if
the SCSI_SCAN_LUN_PRESENT case (so no need to check the return value).
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / log