Arnd Bergmann [Thu, 31 Dec 2015 15:25:22 +0000 (16:25 +0100)]
Merge tag 'omap-for-v4.5/81xx-dts-signed' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt
Pull "reworked dts changes for ti81xx devices and minimal
dra62x j5ec-evm support" from Tony Lindgren:
Add minimal device tree support for dra62x also known j5eco. It is
related to dm814x, just the clocks are a bit different and it has a
different set of integrated devices. And let's get some basic dm814x
and dra62x devices working as many of the devices are like on am33xx::
- pinctrl using the pinctrl defines as for am33xx
- Updated EDMA bindings with support for using exma_xbar
- MMC support for dm814x-evm, t410 and dra62x-j5eco-evm
- USB support for dm814x-evm, t410 and dra62x-j5eco-evm
This branch depends on an earlier omap-for-v4.5/81xx-fixes-signed
branch that has dm814x dts fixes interlaced with SoC related fixes to
keep things booting. The interlaced SoC and dts fixes were needed
because of issues with the device tree defined clocks that just
happened to work on bootloader timings for t410 earlier.
* tag 'omap-for-v4.5/81xx-dts-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits)
ARM: dts: Add usb support for j5-eco evm
ARM: dts: Add usb support for hp t410
ARM: dts: Add usb support for dm814x-evm
ARM: dts: Add usb support for dm814x and dra62x
ARM: dts: Enable emmc on hp t410
ARM: dts: Add mmc support for dra62x j5-eco evm
ARM: dts: Add mmc support for dm8148-evm
ARM: dts: Add mmc device entries for dm814x
ARM: dts: Update edma bindings on dm814x to use edma_xbar
ARM: dts: Add pinctrl macros for dm814x
ARM: dts: Add minimal dra62x j5-eco evm support
ARM: dts: Add basic support for dra62x j5-eco SoC
ARM: OMAP2+: Remove useless check for legacy booting for dm814x
ARM: OMAP2+: Enable GPIO for dm814x
ARM: dts: Fix dm814x pinctrl address and mask
ARM: dts: Fix dm8148 control modules ranges
ARM: OMAP2+: Fix timer entries for dm814x
ARM: dts: Fix some mux and divider clocks to get dm814x-evm booting
ARM: OMAP2+: Add DPPLS clock manager for dm814x
clk: ti: Add few dm814x clock aliases
...
Tony Lindgren [Wed, 23 Dec 2015 00:01:41 +0000 (16:01 -0800)]
ARM: dts: Add usb support for j5-eco evm
Add usb support for j5-eco evm.
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 23 Dec 2015 00:01:37 +0000 (16:01 -0800)]
ARM: dts: Add usb support for hp t410
Add usb support for hp t410 and a fixed regulator for the hub power.
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 23 Dec 2015 00:01:16 +0000 (16:01 -0800)]
ARM: dts: Add usb support for dm814x-evm
Add usb support for dm814x-evm
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 23 Dec 2015 00:01:11 +0000 (16:01 -0800)]
ARM: dts: Add usb support for dm814x and dra62x
The usb is very much like on am33xx, we just put the some of the
componends under scm where they belong.
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 23 Dec 2015 00:01:03 +0000 (16:01 -0800)]
ARM: dts: Enable emmc on hp t410
There's a 2GB emmc on hp t410 that's wired to the sd_2 interface.
Note that we also need to configure the evtmux using edma_xbar for
edma channels.
Let's use the McASP2 channels like the original kernel seems to be
doing, most likely the audio on t410 is different from dm814x-evm.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 23 Dec 2015 00:00:57 +0000 (16:00 -0800)]
ARM: dts: Add mmc support for dra62x j5-eco evm
There's mmc interface on j5-eco evm that's wired to the
sd_1 interface.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 23 Dec 2015 00:00:51 +0000 (16:00 -0800)]
ARM: dts: Add mmc support for dm8148-evm
There is a mmc slot on the dm8148-evm that's wired to the sd_1
interface.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 23 Dec 2015 00:00:45 +0000 (16:00 -0800)]
ARM: dts: Add mmc device entries for dm814x
Add mmc device entries for dm814x.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 23 Dec 2015 00:00:37 +0000 (16:00 -0800)]
ARM: dts: Update edma bindings on dm814x to use edma_xbar
The edma is the same as on am33xx, except it has four tptc
instances. And we need the edma_xbar for at least mmc3, so
let's use the edma_xbar and the new binding as suggested by
Peter Ujfalusi <peter.ujfalusi@ti.com>.
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[tony@atomide.com: updated for ti,edma-memcpy-channels binding]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 23 Dec 2015 00:00:33 +0000 (16:00 -0800)]
ARM: dts: Add pinctrl macros for dm814x
Let's add the DM814X_IOPAD macro the same way as we have for dm816x and
am33xx as this allows comparing the registers with the documentation easily.
The pinctrl bits are yet again different on dm814x.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 23 Dec 2015 00:00:28 +0000 (16:00 -0800)]
ARM: dts: Add minimal dra62x j5-eco evm support
This allows us to boot dra62x j5-eco evm with NFSroot.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Wed, 23 Dec 2015 00:00:20 +0000 (16:00 -0800)]
ARM: dts: Add basic support for dra62x j5-eco SoC
The dra762x j5-eco is similar to dm814x with a bit different clocks
and devices.
[tony@atomide.com: updated to leave out adpll clock driver references]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Marc Gonzalez [Tue, 15 Dec 2015 09:39:19 +0000 (10:39 +0100)]
ARM: dts: tango4: Initial device trees
This device tree was tested on a Sigma Designs SMP8758 Vantage-1172
Rev E1 development board.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 22 Dec 2015 23:02:50 +0000 (15:02 -0800)]
Merge tag 'sunxi-dt-for-4.5-2' of https://git./linux/kernel/git/mripard/linux into next/dt
Allwinner DT patches, round 2
Mostly some audio codec patches to enable it on more boards, and a bunch
devices activation (Ethernet, touchscreen, backlights). One more board has
been added too.
* tag 'sunxi-dt-for-4.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: dts: sun5i: Add dts file for the Empire Electronix D709 tablet
ARM: dts: sun7i: Enable gmac on Wits Pro A20 DKT
ARM: dt: sun7i: Enable audio codec on MK808C
ARM: sunxi: dt: enable audio codec on mk802
ARM: dts: sun7i: Add PA gpio pin to Wexler TAB7200 tablet
ARM: dts: sun7i: Add backlight node to Wexler TAB7200 tablet
ARM: dts: sun7i: Enable touchscreen on Wexler TAB7200 tablet
ARM: dts: sun7i: Enable PWM controller on Wexler TAB7200 tablet
ARM: dts: sun4i: gemei-g9: Enable PA GPIO pin configuration
ARM: dts: sun4i: Enable onboard codec used on the pov protab2-ips9 tablet
ARM: dts: sun5i: Enable onboard codec used on the UTOO P66 tablet
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 22 Dec 2015 23:02:08 +0000 (15:02 -0800)]
Merge tag 'at91-4.5-dt2' of git://git./linux/kernel/git/abelloni/linux into next/dt
Second batch of DT changes for 4.5:
- addition of sound nodes for sama5d2 and the xplained
- addition of a new patform by Landis+Gyr: VInCo
* tag 'at91-4.5-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: at91/dt: sama5d2 Xplained: add pdmic node
ARM: at91/dt: sama5d2: add pdmic node
ARM: at91/dt: Add Support for the L+G VInCo platform
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 22 Dec 2015 22:59:55 +0000 (14:59 -0800)]
Merge tag 'imx-dt-4.5' of git://git./linux/kernel/git/shawnguo/linux into next/dt
The i.MX device tree updates for 4.5:
- New boards support: imx51-ts4800, imx6q-novena, CompuLab imx7d SoM/SBC,
vf610m4-cosmic
- Add ADC device support for imx6ul and imx7d
- Remove config space from PCIe controller ranges property for i.MX6
- Add Vivante GPU nodes for i.MX6
- Add DCU, LCD, and SATA devices for LS1021A
- A series to update Ventana gw5xxx boards getting HDMI and LVDS to work
simultaneously and devices like PWM and SPI added
- Quite a few random cleanups and minor updates
* tag 'imx-dt-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (50 commits)
ARM: dts: imx7d: sbc-imx7: add basic board support
ARM: dts: imx7d: cl-som-imx7: add basic module support
ARM: dts: TS-4800: add touchscreen support
ARM: dts: ts-4800: Add LCD support
ARM: dts: imx6q: add Novena board
devicetree: bindings: Add vendor prefix for Kosagi
ARM: dts: TS-4800: use weim IP to map the FPGA
ARM: dts: TS-4800: drop uart rts/cts pin reservations
ARM: dts: imx6: add Vivante GPU nodes
ARM: dts: imx28: add alternate auart4 pinmux
ARM: dts: ls1021a: add sata node to dts
ARM: dts: TS-4800: add basic device tree
of: documentation: add bindings documentation for TS-4800
of: add vendor prefix for Technologic Systems
ARM: dts: imx7d-sdb: add ADC support
ARM: dts: imx7d.dtsi: add ADC support
ARM: dts: vf-colibri: add CAN support
ARM: mxs: dt:
cfa10057: fix backlight PWM
ARM: dts: imx6qdl: move GIC to right location in DT
ARM: dts: imx6qdl: add IPU aliases
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 22 Dec 2015 22:55:02 +0000 (14:55 -0800)]
Merge tag 'omap-for-v4.5/dt-pt2' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt
Second set of omap device tree changes for v4.5 merge window. This series
updates the EDMA bindings based on the various fixes to split EDMA into
separate independent devices. It also adds support for more devices on the
CompuLab cm-t335 and LogicPD Torpedo boards, and enables the new bindings
for qspi for am437x and dra7. There are also few dra7 regulator fixes, and
change of gpoi-key,wakeup to wakeup-source.
These depend on commit
ae0add740cd0 ("dmaengine: edma: DT: Change reserved
slot array from 16bit to 32bit type") already merged into mainline.
* tag 'omap-for-v4.5/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: LogicPD Torpedo: Add Touchscreen Support
ARM: dts: DRA7-EVM: Add regulator-allow-bypass property for ldo9
ARM: dts: DRA72-EVM: Add regulator-allow-bypass property for ldo1 and ldo2
ARM: dts: AM4372: add entry for qspi mmap region
ARM: dts: DRA7: add entry for qspi mmap region
ARM: OMAP2+: LogicPD Torpedo: Revert Duplicative Entries
ARM: OMAP2+: LogicPD Torpedo + Wireless: Add Bluetooth
ARM: OMAP2+: LogicPD Torpedo: Add LCD Type 15 Support
ARM: dts: cm-t335: add support for bluetooth
ARM: dts: cm-t335: add support for DVI/LCD
ARM: dts: cm-t335: add support for I2C GPIO expander
ARM: dts: cm-t335: add support for SBC-T335
ARM: dts: cm-t335: add support for USB0
ARM: dts: omap: replace legacy *,wakeup property with wakeup-source
ARM: dts: am335x: replace gpio-key,wakeup with wakeup-source property
ARM: DTS: am437x: Use the new DT bindings for the eDMA3
ARM: DTS: am33xx: Use the new DT bindings for the eDMA3
dmaengine: edma: DT: Change reserved slot array from 16bit to 32bit type
dmaengine: edma: DT: Change memcpy channel array from 16bit to 32bit type
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 22 Dec 2015 21:18:44 +0000 (13:18 -0800)]
Merge tag 'socfpga_dts_for_v4.5_part_2' of git://git./linux/kernel/git/dinguyen/linux into next/dt
SoCFPGA DTS update for v4.5, part 2
- clean up mcvevk dts file, replace space with tab
- Disable SDMMC node in base socfpga.dtsi file
* tag 'socfpga_dts_for_v4.5_part_2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga: dts: Enable MMC support at correct place in the DT
ARM: socfpga: Repair incorrectly applied MCV patch
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 22 Dec 2015 21:07:11 +0000 (13:07 -0800)]
Merge tag 'v4.5-rockchip-dts32-2' of git://git./linux/kernel/git/mmind/linux-rockchip into next/dt
Another new soc - the rk3228 quad-core cortex-a7, a new rk3036 board,
support for the efuses on Rockchip socs and some improvements for
rk3288 regulators.
* tag 'v4.5-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: add the kylin board for rk3036
ARM: dts: rockchip: add the sdio/sdmmc node for rk3036
ARM: dts: rockchip: fix the pinctrl bias settings for rk3036
ARM: dts: rockchip: add eFuse node for rk3188 SoCs
ARM: dts: rockchip: add eFuse node for rk3066a SoCs
ARM: dts: rockchip: add eFuse config of rk3288 SoC
ARM: dts: rockchip: add rk3228-evb board
ARM: dts: rockchip: add core rk3228 dtsi
clk: rockchip: Add the clock ids of rk3288 eFuses
ARM: dts: rockchip: Fix typo in rk3288 sdmmc card detect pin name
ARM: dts: rockchip: fix voltage ranges for rk3288-evb-act8846 board
ARM: dts: rockchip: move the public part to rk3288-evb common
ARM: dts: rockchip: add 2 regulators for rk3288-evb-act8846
ARM: dts: rockchip: correct the name of REG8 for rk3288-evb-act8846
clk: rockchip: add dt-binding header for rk3228
clk: rockchip: add id for mipidsi sclk on rk3288
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 22 Dec 2015 21:03:55 +0000 (13:03 -0800)]
Merge tag 'lpc18xx_dts_for_4.5' of https://github.com/manabian/linux-lpc into next/dt
Device Tree additions for LPC18xx platform
NXP LPC18xx EEPROM support plus board updates for CIAA board and
EA4357 Dev kit.
* tag 'lpc18xx_dts_for_4.5' of https://github.com/manabian/linux-lpc:
ARM: dts: lpc4337-ciaa: add i2c0 and devices
ARM: dts: lpc4337-ciaa: enable SCT-PWM
ARM: dts: lpc4357-ea4357: add mma7455 i2c accelerometer
ARM: dts: lpc4357: enable EEPROM memory
ARM: dts: lpc18xx: add EEPROM memory node
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 22 Dec 2015 21:00:45 +0000 (13:00 -0800)]
Merge tag 'v4.4-next-dts' of https://github.com/mbgg/linux-mediatek into next/dt
Add regulators to the scpsys binding.
Move the include of the reset contoller to include/dt-bindings/reset.
Add basic support for mt2701 SoC and evaluation board.
* tag 'v4.4-next-dts' of https://github.com/mbgg/linux-mediatek:
dt-bindings: soc: Add supplies for Mediatek SCPSYS unit
ARM: mediatek: DT: Move reset controller constants into common location
ARM: dts: mediatek: add MT2701 basic support
Document: DT: Add bindings for mediatek MT2701 SoC Platform
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 22 Dec 2015 20:56:14 +0000 (12:56 -0800)]
Merge tag 'mvebu-dt-4.5-3' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt for 4.5 (part 3)
Add dts for the following boards:
- Zyxel NSA325
- PogoPlug series 4
Add GPU support for Dove
Update boolean property to wakeup source for isil
* tag 'mvebu-dt-4.5-3' of git://git.infradead.org/linux-mvebu:
ARM: dts: armada: replace isil, irq2-can-wakeup-machine with wakeup-source property
ARM: dts: enable GPU for SolidRun's Cubox
ARM: dts: dove: add DT GPU support
ARM: mvebu: kirkwood: add PogoPlug series 4 device tree
ARM: mvebu: add kirkwood compatibles for cloudengine boards
ARM: dts: kirkwood: Add DTS for Zyxel NSA325
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 22 Dec 2015 20:52:40 +0000 (12:52 -0800)]
Merge tag 'renesas-dt3-for-v4.5' of git://git./linux/kernel/git/horms/renesas into next/dt
Third Round of Renesas ARM Based SoC DT Updates for v4.5
* Use SoC-specific usb-dmac and IPMMU compatibility strings
* Add internal delay for i2c IPs
* Add missing serial devices to r8a7793
* Enable DMA for r8a7793 serial devices
* Add serial port config to chosen/stdout-path
* Tidyup #sound-dai-cells settings for r8a7798/bockw
* Remove deprecated #gpio-range-cells from r8a7793
* Add EtherAVB support to r8a7791
* Add MSIOF support to sh73a0
* tag 'renesas-dt3-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (25 commits)
ARM: shmobile: r8a779x: use SoC-specific usb-dmac compatibility strings
ARM: shmobile: r8a7794: IPMMU compat string SoC part number update
ARM: shmobile: r8a7793: IPMMU compat string SoC part number update
ARM: shmobile: r8a7791: IPMMU compat string SoC part number update
ARM: shmobile: r8a7790: IPMMU compat string SoC part number update
ARM: shmobile: r8a7794: dtsi: add internal delay for i2c IPs
ARM: shmobile: r8a7791: dtsi: add internal delay for i2c IPs
ARM: shmobile: r8a7790: dtsi: add internal delay for i2c IPs
ARM: shmobile: r8a7793: Describe DMA for the serial ports
ARM: shmobile: r8a7793: Add missing serial devices to DT
ARM: shmobile: lager dts: Add serial port config to chosen/stdout-path
ARM: shmobile: porter dts: Add serial port config to chosen/stdout-path
ARM: shmobile: silk dts: Add serial port config to chosen/stdout-path
ARM: shmobile: gose dts: Add serial port config to chosen/stdout-path
ARM: shmobile: bockw dts: Update console parameters
ARM: shmobile: ape6evm dts: Add serial port config to chosen/stdout-path
ARM: shmobile: alt dts: Add serial port config to chosen/stdout-path
ARM: shmobile: koelsch dts: Add serial port config to chosen/stdout-path
ARM: shmobile: r8a7778: tidyup #sound-dai-cells settings
ARM: shmobile: bockw dts: Override #sound-dai-cells to zero
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 22 Dec 2015 20:17:48 +0000 (12:17 -0800)]
Merge tag 'qcom-dt-for-4.5' of git://git./linux/kernel/git/agross/linux into next/dt
Qualcomm ARM Based Device Tree Updates for v4.5
* Add support for Sony Xperia Z
* Updates for Sony Honami board
* Updates for APQ8064 generic platform
* Updates for MSM8974 generic platform
* Add fixed rate oscillators for MSM8960 and APQ8064
* Add documentation for SMSM and SMP2P
* Fixup PMIC compat strings
* Add support for SMEM, RPM/SMD on APQ8084
* Fixup compat on IFC5640
* tag 'qcom-dt-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (24 commits)
arm: dts: Add support for PMA8084 on APQ8084
arm: dts: Add RPM/SMD support on APQ8084
arm: dts: Add APQ8084 SMEM nodes
ARM: dts: qcom: apq8064-ifc6410 Use hardware flow control for GSBI6
arm: dts: qcom: apq8064: Add fixed rate on-board oscillators
ARM: dts: qcom: msm8974: Add i2c8 node
ARM: dts: qcom: msm8974: Disable wled and move it to honami
arm: dts: qcom: Add generic PMIC gpio/MPP compat strings
arm: dts: qcom: Add aliases for PMICs
arm: dts: qcom: Update ifc6540 compat for qcom boot format
arm: dts: qcom: Add board clocks
ARM: dts: qcom: apq8064: Introduce Sony Xperia Z dts
ARM: dts: qcom: apq8064: Introduce gsbi5 and gsbi5 serial node
ARM: dts: qcom: apq8064: Declare all pm8921 regulators
ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes
dt-binding: soc: qcom: Introduce qcom, smp2p binding documentation
dt-binding: soc: qcom: Add Qualcomm SMSM device tree documentation
devicetree: Add hardware rng entry to qcom-apq8064.dtsi
ARM: dts: qcom: msm8974-honami: Specify charging parameters
ARM: dts: qcom: msm8974-honami: Add uSD slot nodes
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 22 Dec 2015 19:46:26 +0000 (11:46 -0800)]
Merge tag 'at91-dt' of git://git./linux/kernel/git/nferre/linux-at91 into next/dt
First batch of DT changes for 4.5:
- addition of nodes for sama5d2 & sama5d4
- some fixes for i2c hold time, compatible stings
- addition of a new patform by DENX: the MA5D4 SoM and EVK
* tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
ARM: at91/dt: sama5d2 Xplained: pmic needs a specific sda hold time
ARM: at91/dt: sama5d4: update i2c compatible string
ARM: at91/dt: sama5d4 master clock can run at 200MHz now
ARM: at91/dt: sama5d2: add watchdog node
ARM: at91/dt: sama5d4: Add support for DENX MA5D4 SoM and EVK
ARM: at91/dt: sama5d4: Add pinmux for 8-bit MMC0 bus
ARM: at91/dt: sama5d4: Fix mmc0 pinmux comments
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 22 Dec 2015 19:29:28 +0000 (11:29 -0800)]
Merge tag 'sunxi-dt-for-4.5' of https://git./linux/kernel/git/mripard/linux into next/dt
Allwinner DT changes for 4.5
Allwinner device-tree related patches for the 4.5 merge window.
* Support for the H3
* Addition of the RSB to the relevant devices (sun8i, sun9i)
* Addition of the Video Engine clocks for the older SoCs (sun4i, sun7i)
* Addition of the DRAM gates for the older SoCs (sun4i, sun7i)
* Addition of the audio codec to a bunch of boards
* New board: ICNova SWAC
* tag 'sunxi-dt-for-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (40 commits)
ARM: dts: sun7i: Olimex A20-SOM-EVB: Enable mmc3 (baseboard SD socket)
ARM: dts: sun7i: Olimex A20-SOM-EVB: Add LRADC keys
ARM: dts: sun9i: cubieboard4: Enable Reduced Serial Bus controller
ARM: dts: sun9i: cubieboard4: Enable consumer IR receiver
ARM: dts: sun9i: cubieboard4: Enable LEDs
ARM: dts: sun7i: Add VE (Video Engine) module clock node
ARM: dts: sun4i: Add VE (Video Engine) module clock node
ARM: dts: sun8i: Add Orange Pi Plus support
ARM: dts: sunxi: Add Allwinner H3 DTSI
ARM: dts: sun7i: Add DRAM gates
ARM: dts: sun4i: Add DRAM gates
ARM: dts: sun9i: Add NMI controller device node
ARM: dts: sun9i: optimus: Enable Reduced Serial Bus controller
ARM: dts: sun9i: Add Reduced Serial Bus controller device node to A80 dtsi
ARM: dts: sun9i: optimus: Enable consumer IR receiver
ARM: dts: sun9i: Add consumer IR receiver device node and pinmux settings
ARM: dts: sun9i: optimus: Enable LED3
ARM: dts: sun9i: Add A80 R_PIO pin controller device node
ARM: dts: sun9i: Add TODO comments for the main and low power clocks
ARM: dts: sun9i: Add A80 PRCM clocks and reset control nodes
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 22 Dec 2015 19:26:28 +0000 (11:26 -0800)]
Merge tag 'zynq-dt-for-4.5' of https://github.com/Xilinx/linux-xlnx into next/dt
arm: Xilinx Zynq dt patches for v4.5
- Various small DT changes, GPIO, slcr, cpu label
* tag 'zynq-dt-for-4.5' of https://github.com/Xilinx/linux-xlnx:
ARM: dt: zynq: Add labels to cpu nodes to allow overriding OPPs.
ARM: dts: zynq: describe SLCR as simple-mfd rather than simple-bus
ARM: dts: zynq: replace gpio-key,wakeup with wakeup-source property
ARM: zynq: DT: Add interrupt-controller property to GPIO
Signed-off-by: Olof Johansson <olof@lixom.net>
Ilya Ledvich [Tue, 22 Dec 2015 08:15:20 +0000 (10:15 +0200)]
ARM: dts: imx7d: sbc-imx7: add basic board support
SBC-iMX7 is a single board computer designed for industrial
and embedded applications. It is based on the Freescale i.MX7
system-on-chip. SBC-iMX7 is implemented with the CL-SOM-iMX7
System-on-Module providing most of the functions, and SB-SOM-iMX7
carrier board providing additional peripheral functions and
connectors.
http://www.compulab.co.il/products/sbcs/sbc-imx7-freescale-i-mx-7-single-board-computer/
http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/
Add basic board support, including SD card as a secondary boot and storage device
Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Ilya Ledvich [Tue, 22 Dec 2015 08:15:19 +0000 (10:15 +0200)]
ARM: dts: imx7d: cl-som-imx7: add basic module support
CL-SOM-iMX7 is a miniature System-on-Module (SoM) based on
Freescale i.MX7 System-on-Chip family.
http://www.compulab.co.il/products/computer-on-modules/cl-som-imx7-freescale-i-mx-7-system-on-module/
Add basic DT support for standalone module (without a carrier board):
* Memory configuration
* eMMC
* 2x Gigabit Ethernet ports (FEC1 and FEC2)
* I2C2 bus
* EEPROM
* PCA9555 GPIO extender
* PMIC
* UART1
* USB OTG port
Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Damien Riegel [Fri, 18 Dec 2015 17:00:33 +0000 (12:00 -0500)]
ARM: dts: TS-4800: add touchscreen support
This commit enables the touchscreen on TS-4800, using the ts4800-ts
driver.
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Damien Riegel [Fri, 18 Dec 2015 17:00:32 +0000 (12:00 -0500)]
ARM: dts: ts-4800: Add LCD support
This commit adds LCD support for the TS-4800. The panel is an Okaya
RS800480T-7X0WQ and the timings have been extracted from Technologic
Systems' tree.
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Sean Cross [Fri, 18 Dec 2015 05:29:50 +0000 (06:29 +0100)]
ARM: dts: imx6q: add Novena board
Novena is an open-hardware laptop/desktop/bare board.
See http://www.kosagi.com/w/index.php?title=Novena_Main_Page
Signed-off-by: Sean Cross <xobs@kosagi.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Sean Cross [Mon, 21 Dec 2015 13:07:47 +0000 (21:07 +0800)]
devicetree: bindings: Add vendor prefix for Kosagi
Add a vendor prefix for Sutajio Ko-Usagi PTE Ltd., which goes by the
more common name of Kosagi.
Signed-off-by: Sean Cross <xobs@kosagi.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Damien Riegel [Thu, 17 Dec 2015 21:16:53 +0000 (16:16 -0500)]
ARM: dts: TS-4800: use weim IP to map the FPGA
Previously, the device tree mapped the FPGA like any other IPs inside
the SoC, but it is actually mapped through the WEIM (Wireless External
Interface Module). This patch updates the device tree to make use of it.
About the timings: in the image provided by the manufacturer, only
CS0GCR1 is changed. The other values are the default ones, but the WEIM
bindings expect them to be all explicitly set in the device tree, so I
just put the default values in the dt.
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Damien Riegel [Thu, 17 Dec 2015 21:16:52 +0000 (16:16 -0500)]
ARM: dts: TS-4800: drop uart rts/cts pin reservations
These pins are actually not routed for UARTs, they should not be
reserved.
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Lucas Stach [Tue, 15 Dec 2015 16:30:09 +0000 (17:30 +0100)]
ARM: dts: imx6: add Vivante GPU nodes
This adds the device nodes for 2D, 3D and VG GPU cores.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Mans Rullgard [Fri, 11 Dec 2015 13:36:26 +0000 (13:36 +0000)]
ARM: dts: imx28: add alternate auart4 pinmux
Add auart4 2-pin configuration on auart0 rts/cts pads.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tang Yuantian [Tue, 15 Dec 2015 07:14:14 +0000 (15:14 +0800)]
ARM: dts: ls1021a: add sata node to dts
Added sata node to ls1021aqds and ls1021atwr board to support
sata function.
Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Damien Riegel [Fri, 11 Dec 2015 17:08:14 +0000 (12:08 -0500)]
ARM: dts: TS-4800: add basic device tree
This device tree adds support for TS-4800 by Technologic Systems. This
board is based on MX51-babbage, but there are some subtle differences in
the pins used, and there is an additional FPGA that is memory-mapped.
More details here:
http://wiki.embeddedarm.com/wiki/TS-4800
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Damien Riegel [Fri, 11 Dec 2015 17:08:13 +0000 (12:08 -0500)]
of: documentation: add bindings documentation for TS-4800
This adds the documentation for the TS-4800 by Technologic Systems.
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Damien Riegel [Fri, 11 Dec 2015 17:08:12 +0000 (12:08 -0500)]
of: add vendor prefix for Technologic Systems
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Haibo Chen [Tue, 8 Dec 2015 10:26:23 +0000 (18:26 +0800)]
ARM: dts: imx7d-sdb: add ADC support
Add ADC support for imx7d-sdb board.
Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Haibo Chen [Tue, 8 Dec 2015 10:26:22 +0000 (18:26 +0800)]
ARM: dts: imx7d.dtsi: add ADC support
Add imx7d ADC support.
Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stefan Agner [Wed, 2 Dec 2015 22:11:47 +0000 (14:11 -0800)]
ARM: dts: vf-colibri: add CAN support
Add Colibri standard pinmux for FlexCAN controller instances. CAN
is not a standard Colibri feature, but the datasheet predefines
pins which provide CAN (compatible across some modules). Hence,
add the pinmux on module level.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Alexandre Belloni [Wed, 2 Dec 2015 21:35:22 +0000 (22:35 +0100)]
ARM: mxs: dt:
cfa10057: fix backlight PWM
The backlight PWM is actually pwm4.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Lucas Stach [Wed, 2 Dec 2015 13:42:55 +0000 (14:42 +0100)]
ARM: dts: imx6qdl: move GIC to right location in DT
No functional change, just moving the node to the place where it
belongs according to its unit address.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Philipp Zabel [Wed, 2 Dec 2015 13:42:22 +0000 (14:42 +0100)]
ARM: dts: imx6qdl: add IPU aliases
This allows for consistent numbering of the IPU output and
input ports.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Lucas Stach [Mon, 30 Nov 2015 17:00:10 +0000 (18:00 +0100)]
ARM: dts: imx6: remove config space from PCIe controller ranges property
This has been moved to the reg property where it belongs for quite some
time. The range has been unused by the kernel since then and with kernel
4.4 it's flagged as an unparsable range, as it does not comply to the
PCI ranges DT binding. Fix this by removing the superfluous range.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Shengjiu Wang [Thu, 26 Nov 2015 02:39:30 +0000 (10:39 +0800)]
ARM: dts: imx6: Change the clock name for spba clock
Audio IP need the spba clock, but original clock name "dma" is not
accurate, so change it to name "spba". The audio driver has been
using the new name "spba", the binding document has been updated.
Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Meng Yi [Wed, 25 Nov 2015 06:46:07 +0000 (14:46 +0800)]
ARM: dts: ls1021a: Add a TFT LCD panel.
Signed-off-by: Alison Wang <b18965@freescale.com>
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com>
Signed-off-by: Meng Yi <b56799@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Meng Yi [Wed, 25 Nov 2015 06:46:06 +0000 (14:46 +0800)]
ARM: dts: ls1021a: Add DCU dts node.
Signed-off-by: Alison Wang <b18965@freescale.com>
Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com>
Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com>
Signed-off-by: Meng Yi <b56799@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Bai Ping [Tue, 24 Nov 2015 10:25:15 +0000 (18:25 +0800)]
ARM: dts: imx: modify the clocks used by cpufreq driver
As on i.MX7D, we using a virtual arm clk for CPU frequency
scaling, so correct the clocks info used by the cpufreq driver.
Signed-off-by: Bai Ping <b51503@freescale.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Thu, 19 Nov 2015 20:02:24 +0000 (12:02 -0800)]
ARM: dts: imx: ventana: Add SPI support for GW52xx
This addes support for SPI available on an off-board connector available on
some models of the GW52xx.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Thu, 19 Nov 2015 20:02:03 +0000 (12:02 -0800)]
ARM: dts: imx: ventana: add PWM nodes for Ventana boards
Ventana boards have an off-board connector with signals that can be pinmuxed
as either GPIO or PWM. This patch adds pwm device-tree nodes in the disabled
state which the bootloader can decide to enable based on bootloader config.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Afzal Mohammed [Sun, 25 Oct 2015 17:50:56 +0000 (23:20 +0530)]
ARM: dts: vf6xx: Cosmic+: M4(nommu) initial support
Minimal Cortex-M4 device tree to boot Linux to shell. M4 is booted via
Cortex-A5 running Linux using Stefan Agner's <stefan@agner.ch> "m4boot"
utility.
Signed-off-by: Afzal Mohammed <afzal.mohd.ma@gmail.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Cory Tusar [Thu, 19 Nov 2015 03:54:40 +0000 (22:54 -0500)]
ARM: dts: vfxxx: Include support for dspi[23] functionality.
Extend the existing Vybrid DSPI devicetree implementation to also
describe the dspi2 and dspi3 functional blocks.
Signed-off-by: Cory Tusar <cory.tusar@pid1solutions.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Marc Kleine-Budde [Wed, 11 Nov 2015 13:32:44 +0000 (14:32 +0100)]
ARM: dts: imx25: add alias for pwm nodes
This, together with the corresponding patch to pwm-imx.c, allows to order the
pwm devices correctly.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Markus Pargmann [Wed, 11 Nov 2015 06:46:05 +0000 (07:46 +0100)]
ARM: dts: imx6dl: Fix gpt compatibles, remove imx6q-gpt
imx6qdl.dtsi uses compatibles "fsl,imx6q-gpt", "fsl,imx31-gpt".
imx6dl.dtsi uses compatibles "fsl,imx6dl-gpt", "fsl,imx6q-gpt" since
commit
4e415ed8143f (ARM: dts: imx6dl: add imx6dl gpt specific compatible string)
If imx6dl would be compatible with imx6q-gpt it would also have to be
compatible with imx31-gpt which is currently missing.
Based on the above mentioned patch I assume imx6q-gpt and imx6dl-gpt are
not compatible. So imx6q-gpt should be removed as compatible.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Fri, 6 Nov 2015 22:40:32 +0000 (14:40 -0800)]
ARM: dts: imx: ventana: Allow HDMI and LVDS to work simultaneously
Currently it is not possible to have HDMI and LVDS working simultaneously,
because both ports try to use PLL5.
Move the LVDS clock parent to PLL3_USB_OTG, so that HDMI and LVDS can be
driven from independent sources.
With this change the LDB pixel clock goes to 68.57 MHz, which is still
within the valid range for the displays supported by the Ventana boards.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Fri, 6 Nov 2015 22:40:31 +0000 (14:40 -0800)]
ARM: dts: imx: ventana: fix GW53xx/GW54xx lvds channel
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Tim Harvey [Fri, 6 Nov 2015 22:40:30 +0000 (14:40 -0800)]
ARM: dts: imx: ventana: GW54xx PMIC swbst reg always-on
The GW54xx PMIC swbst regulator is used for LVDS power, CANbus xceiver
and HDMI DDC and is enabled by the bootloader. Set the regulator to
always-on so that Linux doesn't turn it off thinking its not needed.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Uwe Kleine-König [Fri, 6 Nov 2015 10:44:29 +0000 (11:44 +0100)]
ARM: dts: imx25-pinfunc: add some more pin configurations
This patch adds some values that are needed for an out-of-tree device
tree I'm currently working with.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 4 Nov 2015 12:54:50 +0000 (10:54 -0200)]
ARM: dts: imx6ul: Add ADC support
Add support for ADC1.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Tue, 3 Nov 2015 16:25:36 +0000 (14:25 -0200)]
ARM: dts: imx6sx: Pass the 'adck-max-frequency' property
Specify the 'adck-max-frequency' property in the adc nodes.
According to Documentation/devicetree/bindings/iio/adc/vf610-adc.txt
this is a recommended property.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peter Chen [Wed, 30 Sep 2015 02:17:17 +0000 (10:17 +0800)]
ARM: dts: imx6: change default burst size for USB
It can improve the USB performance when choosing larger
burst size at some systems (bus size is larger), there is
no side effect if this burst size is larger than bus size.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peter Chen [Wed, 30 Sep 2015 02:17:16 +0000 (10:17 +0800)]
ARM: dts: imx6: set ahb-burst-config as 0 for USB
After setting ahb burst configuration as 0, we can increase tx/rx
burst size, it will improve the USB performance
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Shawn Guo [Tue, 22 Dec 2015 12:40:27 +0000 (20:40 +0800)]
Merge branch 'imx/clk' into imx/dt
Songjun Wu [Tue, 22 Dec 2015 09:26:05 +0000 (17:26 +0800)]
ARM: at91/dt: sama5d2 Xplained: add pdmic node
Add pdmic node on sama5d2-xplained board.The pdmic
pins conflict with ISC_D0 & ISC_D1 data pins.
Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Songjun Wu [Tue, 22 Dec 2015 09:26:04 +0000 (17:26 +0800)]
ARM: at91/dt: sama5d2: add pdmic node
Add pdmic node.
Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Olof Johansson [Tue, 22 Dec 2015 04:39:19 +0000 (20:39 -0800)]
Merge tag 'samsung-dt-syscon-restart-4.5' of https://git./linux/kernel/git/krzk/linux into next/dt
Device Tree changes adding necessary nodes for syscon reboot/poweroff
handlers on Exynos boards. The mach-exynos changes must base on top
of this to retain the bisectability of not loosing reboot/poweroff
features.
* tag 'samsung-dt-syscon-restart-4.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos5410
ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos5
ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos4
ARM: dts: Add syscon-{reboot, poweroff} nodes for exynos3250
Signed-off-by: Olof Johansson <olof@lixom.net>
Adam Ford [Sun, 20 Dec 2015 15:26:15 +0000 (09:26 -0600)]
ARM: OMAP2+: LogicPD Torpedo: Add Touchscreen Support
The development kit uses a TSC2004 chip attached to I2C3.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Hans de Goede [Sun, 20 Dec 2015 11:43:01 +0000 (12:43 +0100)]
ARM: dts: sun5i: Add dts file for the Empire Electronix D709 tablet
The Empire Electronix D709 tablet is a fairly standard 7" A13 tablet,
featuring usb-wifi, a micro-sd slot, micro-usb otg and headphone jack.
Empire Electronix is written on the back of the tablet, the D709 model
info can be found in the about tablet menu in android.
The PCB has no markings to speak of.
This dts file does not add support for the ft5x touchscreen found at
i2c bus 1, addr 0x38, irq PG11, because it does not work out of the box.
It seems it has been flashed with the wrong firmware and needs to have
alternative firmware uploaded at boot to make the touchscreen work
properly, when hot-booting from android into an upstream kernel the
touchscreen does work.
The Memsic MXC622X accelerometer at i2c bus 1, addr 0x15 also is not
enabled as there is no driver for it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Sun, 20 Dec 2015 11:43:02 +0000 (12:43 +0100)]
ARM: dts: sun7i: Enable gmac on Wits Pro A20 DKT
The Wits Pro A20 DKT has a gbit ethernet port, enable it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Marcus Cooper [Sat, 19 Dec 2015 13:08:46 +0000 (14:08 +0100)]
ARM: dt: sun7i: Enable audio codec on MK808C
This commit enables the on-chip audio codec present on the MK808C.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Marcus Cooper [Sat, 19 Dec 2015 13:02:38 +0000 (14:02 +0100)]
ARM: sunxi: dt: enable audio codec on mk802
This commit enables the on-chip audio codec present on some variants
of the MK802.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Aleksei Mamlin [Fri, 18 Dec 2015 08:52:45 +0000 (11:52 +0300)]
ARM: dts: sun7i: Add PA gpio pin to Wexler TAB7200 tablet
Add PA gpio pin for controlling power of two external amplifiers (NS4890) which are used on the Wexler TAB7200 tablet
Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Aleksei Mamlin [Fri, 18 Dec 2015 08:52:22 +0000 (11:52 +0300)]
ARM: dts: sun7i: Add backlight node to Wexler TAB7200 tablet
Add a backlight for controlling the lcd panel backlight on Wexler TAB7200 tablet
Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Aleksei Mamlin [Fri, 18 Dec 2015 08:51:50 +0000 (11:51 +0300)]
ARM: dts: sun7i: Enable touchscreen on Wexler TAB7200 tablet
Add a node for the Goodix GT911 touchscreen found on the Wexler TAB7200 tablet
Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Gregory CLEMENT [Thu, 17 Dec 2015 10:19:19 +0000 (11:19 +0100)]
ARM: at91/dt: Add Support for the L+G VInCo platform
The Versatile Industrial Communication platform is a community oriented
board from Landis + Gyr. It comes with:
- an RS-485 port
- 2 Ethernet ports
- a wireless M-BUS
- a 4G modem
- a 4MB SPI flash
- a 4GB eMMC
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Marek Vasut [Mon, 21 Dec 2015 06:42:01 +0000 (00:42 -0600)]
ARM: socfpga: dts: Enable MMC support at correct place in the DT
The socfpga.dtsi explicitly enabled MMC support, but not all boards are
equiped with an MMC card. There are setups which only have QSPI NOR.
Therefore, disable the MMC support on socfpga.dtsi level and enable it
on per-board basis.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alan Tull <atull@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Thor Thayer <tthayer@altera.com>
Cc: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Caesar Wang [Thu, 17 Dec 2015 14:21:50 +0000 (22:21 +0800)]
ARM: dts: rockchip: add the kylin board for rk3036
This patchset is the initiation version to try work
for kylin board.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Caesar Wang [Thu, 17 Dec 2015 14:21:49 +0000 (22:21 +0800)]
ARM: dts: rockchip: add the sdio/sdmmc node for rk3036
In general, the sdio/sdmmc is used by the wifi module
and sd card.
let's add the node for these function.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Xing Zheng [Thu, 17 Dec 2015 14:21:47 +0000 (22:21 +0800)]
ARM: dts: rockchip: fix the pinctrl bias settings for rk3036
The pinctrl gpio pull up/down is incorrect since the rk3036 SoCs
can't set the status in the internal.
We should keep the default status for enable the gpio status,
In fact, the pull_none is the disable the gpio pull up/down.
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Aleksei Mamlin [Fri, 18 Dec 2015 08:52:08 +0000 (11:52 +0300)]
ARM: dts: sun7i: Enable PWM controller on Wexler TAB7200 tablet
Wexler TAB7200 tablet use channel 0 of the PWM controller for backlight dimming
Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Priit Laes [Fri, 11 Dec 2015 21:23:00 +0000 (23:23 +0200)]
ARM: dts: sun4i: gemei-g9: Enable PA GPIO pin configuration
PA GPIO pin (PH15) controls power to external amplifier (FT2012Q).
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Fri, 11 Dec 2015 18:43:59 +0000 (19:43 +0100)]
ARM: dts: sun4i: Enable onboard codec used on the pov protab2-ips9 tablet
The pov protab2-ips9 tablet uses the A10's integrated audio codec,
enable it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Hans de Goede [Fri, 11 Dec 2015 18:43:58 +0000 (19:43 +0100)]
ARM: dts: sun5i: Enable onboard codec used on the UTOO P66 tablet
The UTOO P66 tablet uses the A13's integrated audio codec, enable it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Keerthy [Mon, 14 Dec 2015 06:36:57 +0000 (12:06 +0530)]
ARM: dts: DRA7-EVM: Add regulator-allow-bypass property for ldo9
Add regulator-allow-bypass property for ldo9.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Keerthy [Mon, 14 Dec 2015 06:36:56 +0000 (12:06 +0530)]
ARM: dts: DRA72-EVM: Add regulator-allow-bypass property for ldo1 and ldo2
Add regulator-allow-bypass property for ldo1 and ldo2.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Vignesh R [Fri, 11 Dec 2015 04:10:00 +0000 (09:40 +0530)]
ARM: dts: AM4372: add entry for qspi mmap region
Add qspi memory mapped region entries for AM43xx based SoCs. Also,
update the binding documents for the controller to document this change.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Vignesh R [Fri, 11 Dec 2015 04:09:59 +0000 (09:39 +0530)]
ARM: dts: DRA7: add entry for qspi mmap region
Add qspi memory mapped region entries for DRA7xx based SoCs. Also,
update the binding documents for the controller to document this change.
Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Marek Vasut [Thu, 17 Dec 2015 23:38:18 +0000 (23:38 +0000)]
ARM: socfpga: Repair incorrectly applied MCV patch
For whatever reason, this patch was not applied verbatim and had all
tabs replaced with spaces. Replace them back by a quick sed.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alan Tull <atull@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: Thor Thayer <tthayer@altera.com>
Cc: Vince Bridgers <vbridgers2013@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Adam Ford [Fri, 18 Dec 2015 00:52:16 +0000 (18:52 -0600)]
ARM: OMAP2+: LogicPD Torpedo: Revert Duplicative Entries
Revert
6f0f6c40b66 ("ARM: dts: Set VAUX1 and VAUX4 on Logic PD Torpedo")
because it It was already done and it's just a duplicate. See:
2d11961f3e55 ("ARM: dts: Set VAUX1 and VAUX4 to 3.0V and 1.8V respectively")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Adam Ford [Wed, 16 Dec 2015 21:34:15 +0000 (15:34 -0600)]
ARM: OMAP2+: LogicPD Torpedo + Wireless: Add Bluetooth
Bindings for the WL1283 Bluetooth was removed from the shared transport
driver in commit
c0bd1b9e5895 ("Revert ti-st: add device tree support")
Until we havea better binding, we need to use the platform data to
initialize Bluetooth.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Adam Ford [Thu, 17 Dec 2015 03:18:29 +0000 (21:18 -0600)]
ARM: OMAP2+: LogicPD Torpedo: Add LCD Type 15 Support
Add basic support for Logic PD type 15 display for older development kits.
This uses GPIO for the backlight.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Uri Mashiach [Sun, 13 Dec 2015 08:55:39 +0000 (10:55 +0200)]
ARM: dts: cm-t335: add support for bluetooth
bluetooth HW is WLS1271 chip connected to UART1.
Device tree modifications:
- Pinmux for UART1.
- Pinmux for bluetooth enable GPIO.
Bluetooth enable GPIO is set to enable during startup by setting the
relevant pinmux pin to pull-up.
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Uri Mashiach [Sun, 13 Dec 2015 08:55:38 +0000 (10:55 +0200)]
ARM: dts: cm-t335: add support for DVI/LCD
Add pinmux configuration for DVI/LCD.
Add DRM display driver node with timing configurations for DVI and LCD.
Add I2C GPIOs configurations for DVI and LCD enable.
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Uri Mashiach [Sun, 13 Dec 2015 08:55:37 +0000 (10:55 +0200)]
ARM: dts: cm-t335: add support for I2C GPIO expander
The I2C GPIO expander (PCA9555) adds 16 GPIOs to the module.
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Uri Mashiach [Sun, 13 Dec 2015 08:55:36 +0000 (10:55 +0200)]
ARM: dts: cm-t335: add support for SBC-T335
Add basic support for the SBC-T335.
CompuLab SBC-T335 is a single baseboard computer.
The SBC-T335 is based on the Texas Instruments Cortex-A8 Sitara AM3354
SoC.
Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / log