GitHub/exynos8895/android_kernel_samsung_universal8895.git
13 years agojump label: Introduce static_branch() interface
Jason Baron [Wed, 16 Mar 2011 21:29:47 +0000 (17:29 -0400)]
jump label: Introduce static_branch() interface

Introduce:

static __always_inline bool static_branch(struct jump_label_key *key);

instead of the old JUMP_LABEL(key, label) macro.

In this way, jump labels become really easy to use:

Define:

        struct jump_label_key jump_key;

Can be used as:

        if (static_branch(&jump_key))
                do unlikely code

enable/disale via:

        jump_label_inc(&jump_key);
        jump_label_dec(&jump_key);

that's it!

For the jump labels disabled case, the static_branch() becomes an
atomic_read(), and jump_label_inc()/dec() are simply atomic_inc(),
atomic_dec() operations. We show testing results for this change below.

Thanks to H. Peter Anvin for suggesting the 'static_branch()' construct.

Since we now require a 'struct jump_label_key *key', we can store a pointer into
the jump table addresses. In this way, we can enable/disable jump labels, in
basically constant time. This change allows us to completely remove the previous
hashtable scheme. Thanks to Peter Zijlstra for this re-write.

Testing:

I ran a series of 'tbench 20' runs 5 times (with reboots) for 3
configurations, where tracepoints were disabled.

jump label configured in
avg: 815.6

jump label *not* configured in (using atomic reads)
avg: 800.1

jump label *not* configured in (regular reads)
avg: 803.4

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20110316212947.GA8792@redhat.com>
Signed-off-by: Jason Baron <jbaron@redhat.com>
Suggested-by: H. Peter Anvin <hpa@linux.intel.com>
Tested-by: David Daney <ddaney@caviumnetworks.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
13 years agotracing: Avoid soft lockup in trace_pipe
Jiri Olsa [Fri, 25 Mar 2011 11:05:18 +0000 (12:05 +0100)]
tracing: Avoid soft lockup in trace_pipe

running following commands:

  # enable the binary option
  echo 1 > ./options/bin
  # disable context info option
  echo 0 > ./options/context-info
  # tracing only events
  echo 1 > ./events/enable
  cat trace_pipe

plus forcing system to generate many tracing events,
is causing lockup (in NON preemptive kernels) inside
tracing_read_pipe function.

The issue is also easily reproduced by running ltp stress test.
(ftrace_stress_test.sh)

The reasons are:
 - bin/hex/raw output functions for events are set to
   trace_nop_print function, which prints nothing and
   returns TRACE_TYPE_HANDLED value
 - LOST EVENT trace do not handle trace_seq overflow

These reasons force the while loop in tracing_read_pipe
function never to break.

The attached patch fixies handling of lost event trace, and
changes trace_nop_print to print minimal info, which is needed
for the correct tracing_read_pipe processing.

v2 changes:
 - omit the cond_resched changes by trace_nop_print changes
 - WARN changed to WARN_ONCE and added info to be able
   to find out the culprit

v3 changes:
 - make more accurate patch comment

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
LKML-Reference: <20110325110518.GC1922@jolsa.brq.redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
13 years agotracing: Print trace_bprintk() formats for modules too
Steven Rostedt [Tue, 22 Mar 2011 03:36:31 +0000 (23:36 -0400)]
tracing: Print trace_bprintk() formats for modules too

The file debugfs/tracing/printk_formats maps the addresses
to the formats that are used by trace_bprintk() so that userspace
tools can read the buffer and be able to decode trace_bprintk events
to get the format saved when reading the ring buffer directly.

This is because trace_bprintk() does not store the format into the
buffer, but just the address of the format, which is hidden in
the kernel memory.

But currently it only exports trace_bprintk()s from the kernel core
and not for modules. The modules need their formats exported
as well.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
13 years agotracing: Convert trace_printk() formats for module to const char *
Steven Rostedt [Tue, 22 Mar 2011 02:59:21 +0000 (22:59 -0400)]
tracing: Convert trace_printk() formats for module to const char *

The trace_printk() formats for modules do not show up in the
debugfs/tracing/printk_formats file. Only the formats that are
for trace_printk()s that are in the kernel core.

To facilitate the change to add trace_printk() formats from modules
into that file as well, we need to convert the structure that
holds the formats from char fmt[], into const char *fmt,
and allocate them separately.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
13 years agoperf script: Add more documentation about the -f/--fields parameters
Arnaldo Carvalho de Melo [Wed, 30 Mar 2011 18:30:43 +0000 (15:30 -0300)]
perf script: Add more documentation about the -f/--fields parameters

Using the commit log for 2c9e45f.

Cc: David Ahern <daahern@cisco.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
13 years agoperf script: If type not given fields apply to all event types
David Ahern [Thu, 17 Mar 2011 16:03:21 +0000 (10:03 -0600)]
perf script: If type not given fields apply to all event types

Allow:
  perf script -f <fields>

to be equivalent to:
  perf script -f trace:<fields> -f sw:<fields> -f hw:<fields>

i.e., the specified fields apply to all event types if the type string
is not given.

The field (-f) arguments are processed in the order received. A later
usage can reset a prior request. e.g.,

  -f trace: -f comm,tid,time,sym

The first -f suppresses trace events (field list is ""), but then the second
invocation sets the fields to comm,tid,time,sym. In this case a warning is
given to the user:

  "Overriding previous field request for all events."

Alternativey, consider the order:

  -f comm,tid,time,sym -f trace:

The first -f sets the fields for all events and the second -f suppresses trace
events. The user is given a warning message about the override, and the result
of the above is that only S/W and H/W events are displayed with the given
fields.

For the 'wildcard' option if a user selected field is invalid for an event
type, a message is displayed to the user that the option is ignored for that
type. For example:

  perf script -f comm,tid,trace 2>&1 | less
  'trace' not valid for hardware events. Ignoring.
  'trace' not valid for software events. Ignoring.

Alternatively, if the type is given an invalid field is specified it is an
error. For example:

    perf script -v -f sw:comm,tid,trace 2>&1 | less
    'trace' not valid for software events.

At this point usage is displayed, and perf-script exits.

Finally, a user may not set fields to none for all event types.
i.e., -f "" is not allowed.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
LPU-Reference: <1300377801-27246-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
13 years agoMerge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux...
Ingo Molnar [Wed, 30 Mar 2011 07:06:51 +0000 (09:06 +0200)]
Merge branch 'perf/core' of git://git./linux/kernel/git/acme/linux-2.6 into perf/core

13 years agoperf probe: Add fastpath to do lookup by function name
Lin Ming [Fri, 25 Mar 2011 08:27:48 +0000 (16:27 +0800)]
perf probe: Add fastpath to do lookup by function name

v3 -> v2:
- Make pubname_search_cb more generic
- Add fastpath to find_probes also

v2 -> v1:
- Don't compare file names with cu_find_realpath(...), instead, compare
  them with the name returned by dwarf_decl_file(sp_die)

The vmlinux file may have thousands of CUs.
We can lookup function name from .debug_pubnames section
to avoid the slow loop on CUs.

1. Improvement data for find_line_range

./perf stat -e cycles -r 10 -- ./perf probe -k /home/mlin/vmlinux \
        -s /home/mlin/linux-2.6 \
        --line csum_partial_copy_to_user > tmp.log

before patch applied
=====================
       847,988,276 cycles

        0.355075856  seconds time elapsed

after patch applied
=====================
       206,102,622 cycles

        0.086883555  seconds time elapsed

2. Improvement data for find_probes

./perf stat -e cycles -r 10 -- ./perf probe -k /home/mlin/vmlinux \
        -s /home/mlin/linux-2.6 \
        --vars csum_partial_copy_to_user > tmp.log

before patch applied
=====================
       848,490,844 cycles

        0.355307901  seconds time elapsed

after patch applied
=====================
       205,684,469 cycles

        0.086694010  seconds time elapsed

Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linux-kernel <linux-kernel@vger.kernel.org>
LKML-Reference: <1301041668.14111.52.camel@minggr.sh.intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
13 years agoperf tools: Emit clearer message for sys_perf_event_open ENOENT return
David Ahern [Fri, 25 Mar 2011 19:11:11 +0000 (13:11 -0600)]
perf tools: Emit clearer message for sys_perf_event_open ENOENT return

Resend of patch sent back in January 2011 in light of recent confusion around
unsupported events for a given platform.

Improve sys_perf_event_open ENOENT return handling in top and record, just
like 5a3446b does for stat.

Retry of Arnaldo's patch using ui_warning instead of die which allows the
fallback from hardware cycles to software clock.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
LKML-Reference: <1301080271-20945-1-git-send-email-daahern@cisco.com>
Signed-off-by: David Ahern <daahern@cisco.com>
[ committer note: Some adjustments to make it apply to newer codebase ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
13 years agoperf tools: Fixup exit path when not able to open events
Arnaldo Carvalho de Melo [Mon, 28 Mar 2011 12:50:11 +0000 (09:50 -0300)]
perf tools: Fixup exit path when not able to open events

We have to deal with the TUI mode in perf top, so that we don't end up
with a garbled screen when, say, a non root user on a machine with a
paranoid setting (the default) tries to use 'perf top'.

Introduce a ui__warning_paranoid() routine shared by top and record that
tells the user the valid values for /proc/sys/kernel/perf_event_paranoid.

Cc: David Ahern <daahern@cisco.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
13 years agoperf, x86: P4 PMU - clean up the code a bit
Cyrill Gorcunov [Sun, 27 Mar 2011 20:46:11 +0000 (00:46 +0400)]
perf, x86: P4 PMU - clean up the code a bit

No change on the functional level, just align the table properly.

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Lin Ming <ming.m.lin@intel.com>
LKML-Reference: <4D8FA213.5050108@openvz.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agoMerge branch 'core' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile...
Ingo Molnar [Tue, 29 Mar 2011 07:32:28 +0000 (09:32 +0200)]
Merge branch 'core' of git://git./linux/kernel/git/rric/oprofile into perf/urgent

13 years agomd: Fix integrity registration error when no devices are capable
Martin K. Petersen [Tue, 29 Mar 2011 00:09:12 +0000 (20:09 -0400)]
md: Fix integrity registration error when no devices are capable

We incorrectly returned -EINVAL when none of the devices in the array
had an integrity profile.  This in turn prevented mdadm from starting
the metadevice.  Fix this so we only return errors on mismatched
profiles and memory allocation failures.

Reported-by: Giacomo Catenazzi <cate@cateee.net>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Tue, 29 Mar 2011 00:51:27 +0000 (17:51 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  selinux: Fix regression for Xorg

13 years agoARM: mx51_efika: fix build error due to new mfd changes
Andres Salomon [Tue, 29 Mar 2011 00:22:30 +0000 (17:22 -0700)]
ARM: mx51_efika: fix build error due to new mfd changes

MFD changes in 4ec1b54c ('mfd: mfd_cell is now implicitly available to
mc13xxx drivers') changed the mc13xxx_platform_data struct layout.

At the time all users were changed, but this driver was introduced in
another tree at the same time.  This updates the mc13xxx_platform_data
user, fixing a build error.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge branches 'irq-cleanup-for-linus' and 'irq-fixes-for-linus' of git://git.kernel...
Linus Torvalds [Tue, 29 Mar 2011 00:39:54 +0000 (17:39 -0700)]
Merge branches 'irq-cleanup-for-linus' and 'irq-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  vlynq: Convert irq functions

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq; Fix cleanup fallout
  genirq: Fix typo and remove unused variable
  genirq: Fix new kernel-doc warnings
  genirq: Add setter for AFFINITY_SET in irq_data state
  genirq: Provide setter inline for IRQD_IRQ_INPROGRESS
  genirq: Remove handle_IRQ_event
  arm: Ns9xxx: Remove private irq flow handler
  powerpc: cell: Use the core flow handler
  genirq: Provide edge_eoi flow handler
  genirq: Move INPROGRESS, MASKED and DISABLED state flags to irq_data
  genirq: Split irq_set_affinity() so it can be called with lock held.
  genirq: Add chip flag for restricting cpu_on/offline calls
  genirq: Add chip hooks for taking CPUs on/off line.
  genirq: Add irq disabled flag to irq_data state
  genirq: Reserve the irq when calling irq_set_chip()

13 years agogenirq; Fix cleanup fallout
Thomas Gleixner [Mon, 28 Mar 2011 19:59:37 +0000 (21:59 +0200)]
genirq; Fix cleanup fallout

I missed the CONFIG_GENERIC_PENDING_IRQ dependency in the affinity
related functions and the IRQ_LEVEL propagation into irq_data
state. Did not pop up on my main test platforms. :(

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: David Daney <ddaney@caviumnetworks.com>
13 years agoselinux: Fix regression for Xorg
Stephen Smalley [Fri, 25 Mar 2011 14:13:43 +0000 (10:13 -0400)]
selinux: Fix regression for Xorg

Commit 6f5317e730505d5cbc851c435a2dfe3d5a21d343 introduced a bug in the
handling of userspace object classes that is causing breakage for Xorg
when XSELinux is enabled.  Fix the bug by changing map_class() to return
SECCLASS_NULL when the class cannot be mapped to a kernel object class.

Reported-by: "Justin P. Mattock" <justinmattock@gmail.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
13 years agomemstick: make enable_dma less generic in r592
Stephen Rothwell [Mon, 28 Mar 2011 23:24:29 +0000 (16:24 -0700)]
memstick: make enable_dma less generic in r592

Fixes this build error:

  drivers/memstick/host/r592.c:26: error: 'enable_dma' redeclared as different kind of symbol
  arch/powerpc/include/asm/dma.h:189: note: previous definition of 'enable_dma' was here

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Alex Dubov <oakad@yahoo.com>
Acked-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
Linus Torvalds [Mon, 28 Mar 2011 22:51:02 +0000 (15:51 -0700)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: stop using the page cache to back the buffer cache
  xfs: register the inode cache shrinker before quotachecks
  xfs: xfs_trans_read_buf() should return an error on failure
  xfs: introduce inode cluster buffer trylocks for xfs_iflush
  vmap: flush vmap aliases when mapping fails
  xfs: preallocation transactions do not need to be synchronous

Fix up trivial conflicts in fs/xfs/linux-2.6/xfs_buf.c due to plug removal.

13 years agoRelax si_code check in rt_sigqueueinfo and rt_tgsigqueueinfo
Roland Dreier [Mon, 28 Mar 2011 21:13:35 +0000 (14:13 -0700)]
Relax si_code check in rt_sigqueueinfo and rt_tgsigqueueinfo

Commit da48524eb206 ("Prevent rt_sigqueueinfo and rt_tgsigqueueinfo
from spoofing the signal code") made the check on si_code too strict.
There are several legitimate places where glibc wants to queue a
negative si_code different from SI_QUEUE:

 - This was first noticed with glibc's aio implementation, which wants
   to queue a signal with si_code SI_ASYNCIO; the current kernel
   causes glibc's tst-aio4 test to fail because rt_sigqueueinfo()
   fails with EPERM.

 - Further examination of the glibc source shows that getaddrinfo_a()
   wants to use SI_ASYNCNL (which the kernel does not even define).
   The timer_create() fallback code wants to queue signals with SI_TIMER.

As suggested by Oleg Nesterov <oleg@redhat.com>, loosen the check to
forbid only the problematic SI_TKILL case.

Reported-by: Klaus Dittrich <kladit@arcor.de>
Acked-by: Julien Tinnes <jln@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge branch 'for-linus' of git://www.jni.nu/cris
Linus Torvalds [Mon, 28 Mar 2011 22:44:06 +0000 (15:44 -0700)]
Merge branch 'for-linus' of git://www.jni.nu/cris

* 'for-linus' of git://www.jni.nu/cris:
  Correct auto-restart of syscalls via restartblock
  CRISv10: Fix return before mutex_unlock in pcf8563
  Drop the CRISv32 version of pcf8563

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs...
Linus Torvalds [Mon, 28 Mar 2011 22:43:25 +0000 (15:43 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ecryptfs/ecryptfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
  eCryptfs: write lock requested keys
  eCryptfs: move ecryptfs_find_auth_tok_for_sig() call before mutex_lock
  eCryptfs: verify authentication tokens before their use
  eCryptfs: modified size of keysig in the ecryptfs_key_sig structure
  eCryptfs: removed num_global_auth_toks from ecryptfs_mount_crypt_stat
  eCryptfs: ecryptfs_keyring_auth_tok_for_sig() bug fix
  eCryptfs: Unlock page in write_begin error path
  ecryptfs: modify write path to encrypt page in writepage
  eCryptfs: Remove ECRYPTFS_NEW_FILE crypt stat flag
  eCryptfs: Remove unnecessary grow_file() function

13 years agoMerge branch 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 28 Mar 2011 22:31:05 +0000 (15:31 -0700)]
Merge branch 'for-linus-unmerged' of git://git./linux/kernel/git/mason/btrfs-unstable

* 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (45 commits)
  Btrfs: fix __btrfs_map_block on 32 bit machines
  btrfs: fix possible deadlock by clearing __GFP_FS flag
  btrfs: check link counter overflow in link(2)
  btrfs: don't mess with i_nlink of unlocked inode in rename()
  Btrfs: check return value of btrfs_alloc_path()
  Btrfs: fix OOPS of empty filesystem after balance
  Btrfs: fix memory leak of empty filesystem after balance
  Btrfs: fix return value of setflags ioctl
  Btrfs: fix uncheck memory allocations
  btrfs: make inode ref log recovery faster
  Btrfs: add btrfs_trim_fs() to handle FITRIM
  Btrfs: adjust btrfs_discard_extent() return errors and trimmed bytes
  Btrfs: make btrfs_map_block() return entire free extent for each device of RAID0/1/10/DUP
  Btrfs: make update_reserved_bytes() public
  btrfs: return EXDEV when linking from different subvolumes
  Btrfs: Per file/directory controls for COW and compression
  Btrfs: add datacow flag in inode flag
  btrfs: use GFP_NOFS instead of GFP_KERNEL
  Btrfs: check return value of read_tree_block()
  btrfs: properly access unaligned checksum buffer
  ...

Fix up trivial conflicts in fs/btrfs/volumes.c due to plug removal in
the block layer.

13 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platf...
Linus Torvalds [Mon, 28 Mar 2011 22:16:10 +0000 (15:16 -0700)]
Merge branch 'for_linus' of git://git./linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (81 commits)
  xo15-ebook: Remove device.wakeup_count
  ips: use interruptible waits in ips-monitor
  acer-wmi: does not poll device status when WMI event is available
  acer-wmi: does not set persistence state by rfkill_init_sw_state
  platform-drivers: x86: fix common misspellings
  acer-wmi: use pr_<level> for messages
  asus-wmi: potential NULL dereference in show_call()
  asus-wmi: signedness bug in read_brightness()
  platform-driver-x86: samsung-laptop: make dmi_check_cb to return 1 instead of 0
  platform-driver-x86: fix wrong merge for compal-laptop.c
  msi-laptop: use pr_<level> for messages
  Platform: add Samsung Laptop platform driver
  acer-wmi: Fix WMI ID
  acer-wmi: deactive mail led when power off
  msi-laptop: send out touchpad on/off key
  acer-wmi: set the touchpad toggle key code to KEY_TOUCHPAD_TOGGLE
  platform-driver-x86: intel_mid_thermal: fix unterminated platform_device_id table
  sony-laptop: potential null dereference
  sony-laptop: handle allocation failures
  sony-laptop: return negative on failure in sony_nc_add()
  ...

13 years agoMerge branch 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw...
Linus Torvalds [Mon, 28 Mar 2011 22:14:45 +0000 (15:14 -0700)]
Merge branch 'for-torvalds' of git://git./linux/kernel/git/linusw/linux-stericsson

* 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  mach-ux500: configure board for the TPS61052 regulator v2
  mach-ux500: provide ab8500 init vector
  mach-ux500: board support for AB8500 GPIO driver
  gpio: driver for 42 AB8500 GPIO pins

13 years agoMerge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 28 Mar 2011 22:08:48 +0000 (15:08 -0700)]
Merge branch 's5p-fixes-for-linus' of git://git./linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: Suspend: Fix dependency of ARCH_SUSPEND_POSSIBLE
  ARM: SAMSUNG: Fix CPU idmask
  ARM: EXYNOS4: Fix addruart macro
  ARM: EXYNOS4: Fix smsc9215 irq polarity on SMDKC210
  ARM: EXYNOS4: Fix smsc9215 irq polarity on SMDKV310
  ARM: EXYNOS4: Fix build warning on regarding SATA_AHCI_PLATFORM
  ARM: S5PV210: Remove duplicated inclusion
  ARM: S5PV210: Fix security engine interrupt names
  ARM: S5P64X0: Fix iodesc array size for S5P6450

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Mon, 28 Mar 2011 20:07:49 +0000 (13:07 -0700)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: aesni-intel - fixed problem with packets that are not multiple of 64bytes

13 years agoMerge branch 'for-linus' of git://gitserver.sunplusct.com/linux-2.6-score
Linus Torvalds [Mon, 28 Mar 2011 20:06:32 +0000 (13:06 -0700)]
Merge branch 'for-linus' of git://gitserver.sunplusct.com/linux-2.6-score

* 'for-linus' of git://gitserver.sunplusct.com/linux-2.6-score:
  score: Use generic show_interrupts()
  score: Convert to new irq function names
  score: lost a semicolon in asm/irqflags.h
  score: Select GENERIC_HARDIRQS_NO_DEPRECATED
  score: Convert irq_chip to new functions

13 years agoacpi: Remove sysfs_create_link from video driver
Matthew Garrett [Mon, 28 Mar 2011 12:46:02 +0000 (12:46 +0000)]
acpi: Remove sysfs_create_link from video driver

The acpi video driver attempts to explicitly create a sysfs link between
the acpi device and the associated PCI device. However, we're now also
doing this from the backlight core, which means that we get a backtrace
caused by a duplicate file. Remove the code and leave it up to the
backlight core.

Reported-by: Jeff Chua <jeff.chua.linux@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Alessandro Suardi <alessandro.suardi@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec...
Linus Torvalds [Mon, 28 Mar 2011 20:03:31 +0000 (13:03 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (39 commits)
  Treat writes as new when holes span across page boundaries
  fs,ocfs2: Move o2net_get_func_run_time under CONFIG_OCFS2_FS_STATS.
  ocfs2/dlm: Move kmalloc() outside the spinlock
  ocfs2: Make the left masklogs compat.
  ocfs2: Remove masklog ML_AIO.
  ocfs2: Remove masklog ML_UPTODATE.
  ocfs2: Remove masklog ML_BH_IO.
  ocfs2: Remove masklog ML_JOURNAL.
  ocfs2: Remove masklog ML_EXPORT.
  ocfs2: Remove masklog ML_DCACHE.
  ocfs2: Remove masklog ML_NAMEI.
  ocfs2: Remove mlog(0) from fs/ocfs2/dir.c
  ocfs2: remove NAMEI from symlink.c
  ocfs2: Remove masklog ML_QUOTA.
  ocfs2: Remove mlog(0) from quota_local.c.
  ocfs2: Remove masklog ML_RESERVATIONS.
  ocfs2: Remove masklog ML_XATTR.
  ocfs2: Remove masklog ML_SUPER.
  ocfs2: Remove mlog(0) from fs/ocfs2/heartbeat.c
  ocfs2: Remove mlog(0) from fs/ocfs2/slot_map.c
  ...

Fix up trivial conflict in fs/ocfs2/super.c

13 years agogenirq: Fix typo and remove unused variable
Thomas Gleixner [Mon, 28 Mar 2011 18:28:56 +0000 (20:28 +0200)]
genirq: Fix typo and remove unused variable

Sigh, I'm overworked.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agogenirq: Fix new kernel-doc warnings
Randy Dunlap [Fri, 18 Mar 2011 16:33:56 +0000 (09:33 -0700)]
genirq: Fix new kernel-doc warnings

Fix new irq-related kernel-doc warnings in 2.6.38:

Warning(kernel/irq/manage.c:149): No description found for parameter 'mask'
Warning(kernel/irq/manage.c:149): Excess function parameter 'cpumask' description in 'irq_set_affinity'
Warning(include/linux/irq.h:161): No description found for parameter 'state_use_accessors'
Warning(include/linux/irq.h:161): Excess struct/union/enum/typedef member 'state_use_accessor' description in 'irq_data'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <20110318093356.b939558d.randy.dunlap@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agoperf symbols: Fix vsyscall symbol lookup
Andrew Lutomirski [Thu, 24 Mar 2011 04:36:56 +0000 (00:36 -0400)]
perf symbols: Fix vsyscall symbol lookup

Perf can't currently trace into the vsyscall page.  It looks like it was
meant to work.

Tested on 2.6.38 and today's -git.

The bug is easy to reproduce.  Compile this:

int main()
{
int i;
struct timespec t;
for(i = 0; i < 10000000; i++)
clock_gettime(CLOCK_MONOTONIC, &t);
return 0;
}

and run it through perf record; perf report.  The top entry shows
"[unknown]" and you can't zoom in.

It looks like there are two issues.  The first is a that a test for user
mode executing in kernel space is backwards.  (That's the first hunk
below).  The second (I think) is that something's wrong with the code
that generates lots of little struct dso objects for different sections
-- when it runs on vmlinux it results in bogus long_name values which
cause objdump to fail.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LPU-Reference: <AANLkTikxSw5+wJZUWNz++nL7mgivCh_Zf=2Kq6=f9Ce_@mail.gmail.com>
Signed-off-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
13 years agovlynq: Convert irq functions
Thomas Gleixner [Fri, 25 Mar 2011 20:56:37 +0000 (21:56 +0100)]
vlynq: Convert irq functions

Convert to the new irq_chip functions and the new namespace.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Florian Fainelli <florian@openwrt.org>
LKML-Reference: <alpine.LFD.2.00.1103252150180.31464@localhost6.localdomain6>

13 years agoTreat writes as new when holes span across page boundaries
Goldwyn Rodrigues [Thu, 17 Feb 2011 15:44:40 +0000 (09:44 -0600)]
Treat writes as new when holes span across page boundaries

When a hole spans across page boundaries, the next write forces
a read of the block. This could end up reading existing garbage
data from the disk in ocfs2_map_page_blocks. This leads to
non-zero holes. In order to avoid this, mark the writes as new
when the holes span across page boundaries.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: jlbec <jlbec@evilplan.org>
13 years agoMerge branch 'mlog_replace_for_39' of git://repo.or.cz/taoma-kernel into ocfs2-merge...
Joel Becker [Mon, 28 Mar 2011 16:44:26 +0000 (09:44 -0700)]
Merge branch 'mlog_replace_for_39' of git://repo.or.cz/taoma-kernel into ocfs2-merge-window-fix

13 years agofs,ocfs2: Move o2net_get_func_run_time under CONFIG_OCFS2_FS_STATS.
Rakib Mullick [Fri, 18 Mar 2011 11:01:08 +0000 (17:01 +0600)]
fs,ocfs2: Move o2net_get_func_run_time under CONFIG_OCFS2_FS_STATS.

When CONFIG_DEBUG_FS=y and CONFIG_OCFS2_FS_STATS=n, we get the
following warning:

fs/ocfs2/cluster/tcp.c:213:16: warning: â€˜o2net_get_func_run_time’
defined but not used

Since o2net_get_func_run_time is only called from
o2net_update_recv_stats, so move it under CONFIG_OCFS2_FS_STATS.

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: jlbec <jlbec@evilplan.org>
13 years agogenirq: Add setter for AFFINITY_SET in irq_data state
Thomas Gleixner [Mon, 28 Mar 2011 15:11:13 +0000 (17:11 +0200)]
genirq: Add setter for AFFINITY_SET in irq_data state

Some archs want to prevent the default affinity being set on their
chips in the reqeust_irq() path.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agogenirq: Provide setter inline for IRQD_IRQ_INPROGRESS
Thomas Gleixner [Mon, 28 Mar 2011 14:41:14 +0000 (16:41 +0200)]
genirq: Provide setter inline for IRQD_IRQ_INPROGRESS

Special function for demultiplexing handlers which can be disabled via
disable_irq().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agogenirq: Remove handle_IRQ_event
Thomas Gleixner [Mon, 28 Mar 2011 14:27:31 +0000 (16:27 +0200)]
genirq: Remove handle_IRQ_event

Last user gone.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agoarm: Ns9xxx: Remove private irq flow handler
Thomas Gleixner [Wed, 2 Feb 2011 21:41:27 +0000 (21:41 +0000)]
arm: Ns9xxx: Remove private irq flow handler

handle_prio_irq is almost identical with handle_fasteoi_irq. The
subtle differences are

1) The handler checks for IRQ_DISABLED after the device handler has
   been called. In case it's set it masks the interrupt.

2) When the handler sees IRQ_DISABLED on entry it masks the interupt
   in the same way as handle_fastoei_irq, but does not set the
   IRQ_PENDING flag.

3) Instead of gracefully handling a recursive interrupt it crashes the
   kernel.

#1 is just relevant when a device handler calls disable_irq_nosync()
   and it does not matter whether we mask the interrupt right away or
   not. We handle lazy masking for disable_irq anyway, so there is no
   real reason to have this extra mask in place.

#2 will prevent the resend of a pending interrupt, which can result in
   lost interrupts for edge type interrupts. For level type interrupts
   the resend is a noop in the generic code. According to the
   datasheet all interrupts are level type, so marking them as such
   will result in the exact same behaviour as the private
   handle_prio_irq implementation.

#3 is just stupid. Crashing the kernel instead of handling a problem
   gracefully is just wrong. With the current semantics- all handlers
   run with interrupts disabled - this is even more wrong.

Rename ack to eoi, remove the unused mask_ack, switch to
handle_fasteoi_irq and remove the private function.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
LKML-Reference: <20110202212552.299898447@linutronix.de>

13 years agopowerpc: cell: Use the core flow handler
Thomas Gleixner [Mon, 28 Mar 2011 14:23:12 +0000 (16:23 +0200)]
powerpc: cell: Use the core flow handler

The core handler is a full equivalent replacement.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agogenirq: Provide edge_eoi flow handler
Thomas Gleixner [Mon, 28 Mar 2011 14:13:24 +0000 (16:13 +0200)]
genirq: Provide edge_eoi flow handler

This is a replacment for the cell flow handler which is in the way of
cleanups. Must be selected to avoid general bloat.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agogenirq: Move INPROGRESS, MASKED and DISABLED state flags to irq_data
Thomas Gleixner [Mon, 28 Mar 2011 12:10:52 +0000 (14:10 +0200)]
genirq: Move INPROGRESS, MASKED and DISABLED state flags to irq_data

We really need these flags for some of the interrupt chips. Move it
from internal state to irq_data and provide proper accessors.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Daney <ddaney@caviumnetworks.com>
13 years agoMerge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
Linus Torvalds [Mon, 28 Mar 2011 14:52:58 +0000 (07:52 -0700)]
Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: Ensure that rpc_release_resources_task() can be called twice.
  NFS: Don't leak RPC clients in NFSv4 secinfo negotiation
  NFS: Fix a hang in the writeback path

13 years agoMFD: allow cs5535-mfd to build on X86 only
Andres Salomon [Mon, 28 Mar 2011 04:26:03 +0000 (21:26 -0700)]
MFD: allow cs5535-mfd to build on X86 only

Stephen ran into the following build error:

  drivers/mfd/cs5535-mfd.c:30:22: error: asm/olpc.h: No such file or directory

olpc.h exists only on x86 (and in the future, ARM).  Rather than
wrapping the include in an #ifdef, just change cs5535-mfd to only build
on x86.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agodrbd: fix up merge error
Linus Torvalds [Mon, 28 Mar 2011 14:42:58 +0000 (07:42 -0700)]
drbd: fix up merge error

In commit 95a0f10cddbf ("drbd: store in-core bitmap little endian,
regardless of architecture") drbd had made the sane choice to use
little-endian bitmap functions everywhere.  However, it used the
horrible old functions names from <asm-generic/bitops/le.h>, that were
never really meant to be exported.

In the meantime, things got cleaned up, and in commit c4945b9ed472
("asm-generic: rename generic little-endian bitops functions") we
renamed the LE bitops to something sane, exactly so that they could be
used in random code without people gouging their eyes out when seeing
the crazy jumble of letters that were the old internal names.

As a result the drbd thing merged cleanly (commit 8d49a77568d1: "Merge
branch 'for-2.6.39/drivers' of git://git.kernel.dk/linux-2.6-block"),
since there was no data conflict - but the end result obviously doesn't
actually compile.

Reported-and-tested-by: Ingo Molnar <mingo@elte.hu>
Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge branch 'x86-platform-next' into x86-platform
Matthew Garrett [Mon, 28 Mar 2011 10:47:38 +0000 (06:47 -0400)]
Merge branch 'x86-platform-next' into x86-platform

13 years agoxo15-ebook: Remove device.wakeup_count
Matthew Garrett [Mon, 28 Mar 2011 10:40:23 +0000 (06:40 -0400)]
xo15-ebook: Remove device.wakeup_count

This is handled automatically now.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoips: use interruptible waits in ips-monitor
Jesse Barnes [Mon, 28 Mar 2011 10:36:30 +0000 (06:36 -0400)]
ips: use interruptible waits in ips-monitor

This is what I intended to do since:
  1) the driver handles variable waits just fine, and
  2) interruptible waits aren't reported as load in the load avg.

Reported-and-tested-by: Andreas Hartmann <andihartmann@freenet.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoacer-wmi: does not poll device status when WMI event is available
Lee, Chun-Yi [Mon, 28 Mar 2011 10:34:13 +0000 (06:34 -0400)]
acer-wmi: does not poll device status when WMI event is available

Acer WMI hotkey event's result include current device status, just
need sync the status to killswitch after acer-wmi driver receive
hotkey event but not always poll device status. This is good for
performance.

But, if use EC raw mode, Acer BIOS will not emit wmi event and
leave EC to control device status. So, still startup polling job
when doesn't detect WMI event GUID or user choice to use ec_raw_mode.

Tested on Acer TravelMate 8572 notebook.

Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Thomas Renninger <trenn@suse.de>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoacer-wmi: does not set persistence state by rfkill_init_sw_state
Lee, Chun-Yi [Mon, 28 Mar 2011 08:52:02 +0000 (16:52 +0800)]
acer-wmi: does not set persistence state by rfkill_init_sw_state

Acer BIOS keeps devices state when system reboot, but reset to default
device states (Wlan on, Bluetooth off, wwan on) if system cold boot.
That means BIOS's initial state is not always real persistence.

So, removed rfkill_init_sw_state because it sets initial state to
persistence then replicate to other new killswitch when rfkill-input
enabled.
After removed it, acer-wmi set initial soft-block state after rfkill
register, and doesn't allow set_block until rfkill initial finished.

Reference: bko#31002
https://bugzilla.kernel.org/show_bug.cgi?id=31002

Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: OldÅ\99ich JedliÄ\8dka <oldium.pro@seznam.cz>
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoplatform-drivers: x86: fix common misspellings
Lucas De Marchi [Thu, 17 Mar 2011 20:18:22 +0000 (17:18 -0300)]
platform-drivers: x86: fix common misspellings

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoacer-wmi: use pr_<level> for messages
Lee, Chun-Yi [Wed, 16 Mar 2011 10:52:36 +0000 (18:52 +0800)]
acer-wmi: use pr_<level> for messages

acer-wmi: use pr_<level> for messages

Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Corentin Chary <corentincj@iksaif.net>
Cc: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoasus-wmi: potential NULL dereference in show_call()
Dan Carpenter [Tue, 15 Mar 2011 07:07:37 +0000 (10:07 +0300)]
asus-wmi: potential NULL dereference in show_call()

In the earlier check we assumed that "obj" could be NULL.  I looked at
some of the other places that call evaluate_object() and they check
for NULL as well.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoasus-wmi: signedness bug in read_brightness()
Dan Carpenter [Tue, 15 Mar 2011 07:06:23 +0000 (10:06 +0300)]
asus-wmi: signedness bug in read_brightness()

"err" needs to be signed for the error handling to work.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoplatform-driver-x86: samsung-laptop: make dmi_check_cb to return 1 instead of 0
Axel Lin [Mon, 14 Mar 2011 10:56:18 +0000 (18:56 +0800)]
platform-driver-x86: samsung-laptop: make dmi_check_cb to return 1 instead of 0

dmi_check_system() walks the table running matching functions until
someone returns non zero or we hit the end.

This patch makes dmi_check_cb to return 1 so dmi_check_system() return
immediately when a match is found.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoplatform-driver-x86: fix wrong merge for compal-laptop.c
Axel Lin [Mon, 14 Mar 2011 10:53:14 +0000 (18:53 +0800)]
platform-driver-x86: fix wrong merge for compal-laptop.c

I found the commit 80183a4b
"compal-laptop/fujitsu-laptop/msi-laptop: make dmi_check_cb to return 1 instead of 0"
has wrong patch merge.

The original patch change the return value for dmi_check_cb():
https://lkml.org/lkml/2010/7/2/88
But commit 80183a4b changed the return value for set_backlight_level.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agomsi-laptop: use pr_<level> for messages
Joey Lee [Wed, 16 Mar 2011 07:55:19 +0000 (01:55 -0600)]
msi-laptop: use pr_<level> for messages

msi-laptop: use pr_<level> for messages

Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoPlatform: add Samsung Laptop platform driver
Greg Kroah-Hartman [Fri, 11 Mar 2011 17:41:19 +0000 (12:41 -0500)]
Platform: add Samsung Laptop platform driver

This adds the samsung-laptop driver to the kernel.  It now supports
all known Samsung laptops that use the SABI interface.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoacer-wmi: Fix WMI ID
Pali Rohár [Fri, 11 Mar 2011 17:36:43 +0000 (12:36 -0500)]
acer-wmi: Fix WMI ID

This patch change WMI ID to upper characters. With this patch module
acer-wmi is automatically loaded when WMI ID is detected.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoacer-wmi: deactive mail led when power off
Pali Rohár [Sat, 26 Feb 2011 20:18:58 +0000 (21:18 +0100)]
acer-wmi: deactive mail led when power off

This patch deactive mail led when laptop is going to hibernete/suspend
or power off. After resume from hibernate/suspend correctly restore
mail led state.

Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agomsi-laptop: send out touchpad on/off key
Lee, Chun-Yi [Mon, 7 Mar 2011 07:46:28 +0000 (15:46 +0800)]
msi-laptop: send out touchpad on/off key

MSI BIOS's raw behavior is send out KEY_TOUCHPAD_TOGGLE key when user
pressed touchpad hotkey.

Actually, we can capture the real touchpad status by read 0xE4 EC address
on MSI netbook/notebook. So, add msi-laptop input device for send out
KEY_TOUCHPAD_ON or KEY_TOUCHPAD_OFF key when user pressed Fn+F3 touchpad
hotkey. It leave userland applications to know the real touchpad status.

Tested on MSI netbook U-100, U-115, U160(N051), U160DX, N014, N034
Tested on MSI notebook CR620

Cc: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoacer-wmi: set the touchpad toggle key code to KEY_TOUCHPAD_TOGGLE
Lee, Chun-Yi [Tue, 1 Mar 2011 17:07:11 +0000 (01:07 +0800)]
acer-wmi: set the touchpad toggle key code to KEY_TOUCHPAD_TOGGLE

Set the touchpad toggle key code from F22 to KEY_TOUCHPAD_TOGGLE,
and userspace should use udev's key re-mapping facilities while X
is unable to process keycodes above 255 to adjust to the keycode.

Cc: Matthew Garrett <mjg@redhat.com>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Lee, Chun-Yi <jlee@novell.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoplatform-driver-x86: intel_mid_thermal: fix unterminated platform_device_id table
Axel Lin [Sat, 26 Feb 2011 15:03:34 +0000 (23:03 +0800)]
platform-driver-x86: intel_mid_thermal: fix unterminated platform_device_id table

The platform_device_id table is supposed to be zero-terminated.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agosony-laptop: potential null dereference
Dan Carpenter [Sun, 27 Feb 2011 14:13:25 +0000 (17:13 +0300)]
sony-laptop: potential null dereference

In the original code, if "device_enum" was NULL then it would
dereference it when it printed the error message.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agosony-laptop: handle allocation failures
Dan Carpenter [Sat, 26 Feb 2011 12:55:24 +0000 (15:55 +0300)]
sony-laptop: handle allocation failures

Return -ENOMEM if kzalloc() fails.  The callers already handle error
returns.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agosony-laptop: return negative on failure in sony_nc_add()
Dan Carpenter [Sat, 26 Feb 2011 12:54:57 +0000 (15:54 +0300)]
sony-laptop: return negative on failure in sony_nc_add()

There were two places in sony_nc_add() where we returned zero on failure
instead of a negative error code.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agosony-laptop: make a couple variables static
Dan Carpenter [Sat, 26 Feb 2011 12:54:27 +0000 (15:54 +0300)]
sony-laptop: make a couple variables static

Sparse complains that these variables should be static.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoeeepc-wmi: set the touchpad toggle key code to KEY_TOUCHPAD_TOGGLE
Keng-Yu Lin [Tue, 1 Mar 2011 04:56:13 +0000 (12:56 +0800)]
eeepc-wmi: set the touchpad toggle key code to KEY_TOUCHPAD_TOGGLE

Signed-off-by: Keng-Yu Lin <keng-yu.lin@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoideapad: read brightness setting on brightness key notify
Ike Panhc [Wed, 23 Feb 2011 13:39:59 +0000 (21:39 +0800)]
ideapad: read brightness setting on brightness key notify

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=25922
On ideapad Y530, the brightness key notify will be blocked if the last notify
is not responsed by getting the brightness value. Read value when we get the
notify shall fix the problem and will not have any difference on other ideapads.

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoeeepc-wmi: kconfig changes to fix build errors
Randy Dunlap [Tue, 22 Feb 2011 21:47:35 +0000 (13:47 -0800)]
eeepc-wmi: kconfig changes to fix build errors

Fix eeepc-wmi build when CONFIG_HOTPLUG_PCI is not enabled:

eeepc-wmi.c:(.text+0x3bc5e9): undefined reference to `pci_hp_deregister'
eeepc-wmi.c:(.text+0x3bcca4): undefined reference to `__pci_hp_register'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoeeepc-wmi: restore KEY_CAMERA_* keys lost in 190ca27
Corentin Chary [Sat, 26 Feb 2011 09:20:43 +0000 (10:20 +0100)]
eeepc-wmi: restore KEY_CAMERA_* keys lost in 190ca27

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoasus-wmi: add hwmon interface and pwm1
Corentin Chary [Sat, 26 Feb 2011 09:20:42 +0000 (10:20 +0100)]
asus-wmi: add hwmon interface and pwm1

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoasus-wmi: add some common device ids and method ids
Corentin Chary [Sat, 26 Feb 2011 09:20:41 +0000 (10:20 +0100)]
asus-wmi: add some common device ids and method ids

I also found some leds ids (0x00020011-0x00020016 and 0x00040015),
but since they are not really present on the notebook,
I can't guess their name .

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoasus-nb-wmi: Asus Notebooks WMI Driver
Corentin Chary [Sat, 26 Feb 2011 09:20:40 +0000 (10:20 +0100)]
asus-nb-wmi: Asus Notebooks WMI Driver

Introduce a new driver for Asus Notebooks shipped with
a WMI device instead of the old ACPI device. The WMI
device is almost the same as the one present in Eee PC,
but the event guid and the keymap are different.

The keymap comes from asus-laptop module.

On Asus notebooks, when you call the WMI device, you always
need a 64bit buffer, even if you only want to get the state
of a device (tested on a G73).

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoasus-wmi: allow debugfs interface to call arbitrary method
Corentin Chary [Sat, 26 Feb 2011 09:20:39 +0000 (10:20 +0100)]
asus-wmi: allow debugfs interface to call arbitrary method

Also add some # format flags to debugfs output.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoasus-wmi: add calls to INIT, SPEC and SFUN on init
Corentin Chary [Sat, 26 Feb 2011 09:20:38 +0000 (10:20 +0100)]
asus-wmi: add calls to INIT, SPEC and SFUN on init

INIT() call is needed to enable hotkeys on G73
SPEC() and SFUN() allow us to know more about
available features.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoasus-wmi: fix and clean backlight code
Corentin Chary [Sat, 26 Feb 2011 09:20:37 +0000 (10:20 +0100)]
asus-wmi: fix and clean backlight code

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoasus-wmi: try to guess the right DSTS methods
Corentin Chary [Sat, 26 Feb 2011 09:20:36 +0000 (10:20 +0100)]
asus-wmi: try to guess the right DSTS methods

This is tricky, new WMI aware notebooks seems to use
0x53545344 while Eee PCs are using 0x53544344. But there
is no way to know if there is an Eee PC in that wild that is
using 0x53545344 or a notebook using 0x53544344. So the
driver try to guess the available DSTS method ... But most Eee PCs
never return 0xFFFFFFFE when a method is not available, they return
0 instead (and that's useless).

So, first, try 0x53544344 then 0x53545344. We will find
a better way when we got more data.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoasus-wmi: factorise wmi_evaluate_method call
Corentin Chary [Sat, 26 Feb 2011 09:20:35 +0000 (10:20 +0100)]
asus-wmi: factorise wmi_evaluate_method call

This patch create a single function to call the
WMI methods. This function handle inexistent methods (when
implemented by the WMI devices, and this is not the case on
Eee PCs), ACPI errors, etc..

Also pack struct bios_arg, and make sure that we always send
a 64bit buffer when calling a WMI method, because this is
needed on Asus notebooks.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoasus-wmi: handle "unknown status" bit
Corentin Chary [Sat, 26 Feb 2011 09:20:34 +0000 (10:20 +0100)]
asus-wmi: handle "unknown status" bit

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoasus-wmi: introduce struct asus_rfkill
Corentin Chary [Sat, 26 Feb 2011 09:20:33 +0000 (10:20 +0100)]
asus-wmi: introduce struct asus_rfkill

First, this allow use to remove the custom asusrfkill_wlan_query,
but this will also allow us to give struct asus_wmi * to
get_devstate/set_devstate later.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoasus-wmi: minor cleanups
Corentin Chary [Sat, 26 Feb 2011 09:20:32 +0000 (10:20 +0100)]
asus-wmi: minor cleanups

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoeeepc-wmi: asus generic asus-wmi.ko module
Corentin Chary [Sat, 26 Feb 2011 09:20:31 +0000 (10:20 +0100)]
eeepc-wmi: asus generic asus-wmi.ko module

New Asus notebooks are using a WMI device similar to
the one used in Eee PCs. Since we don't want to load
eeepc-wmi module on Asus notebooks, and we want to
keep the eeepc-wmi module for backward compatibility,
this patch introduce a new module, named asus-wmi, that
will be used by eeepc-wmi and the new Asus Notebook WMI
Driver.

eeepc-wmi's input device strings (device name and phys)
are kept, but rfkill and led names are changed (s/eeepc/asus/).
This should not break anything since rfkill are used by type or
index, not by name, and the eeepc::touchpad led wasn't working
correctly before 2.6.39 anyway.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoasus-wmi: move generic code to asus-wmi
Corentin Chary [Sat, 26 Feb 2011 09:20:30 +0000 (10:20 +0100)]
asus-wmi: move generic code to asus-wmi

New Asus notebooks are using a WMI device similar to
the one used in Eee PCs. Since we don't want to load
a module named eeepc-laptop on Asus Notebooks, start by
copying all the code to asus-wmi.c.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agomedfield: Add Thermal Driver
Durgadoss R [Sun, 20 Feb 2011 17:35:43 +0000 (23:05 +0530)]
medfield: Add Thermal Driver

This is the basic thermal sensor driver for Intel MID platform using the
Medfield chipset. It plugs in via the thermal drivers and provides sensor
readings for the device sensors.

Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agohp-wmi: add rfkill support for wireless query 0x1b
Anssi Hannula [Sun, 20 Feb 2011 18:07:26 +0000 (20:07 +0200)]
hp-wmi: add rfkill support for wireless query 0x1b

Some recent HP laptops use a new wireless query command type 0x1b.

Add support for it. Tested on HP Mini 5102.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agohp-wmi: make rfkill initialization failure non-fatal
Anssi Hannula [Sun, 20 Feb 2011 18:07:25 +0000 (20:07 +0200)]
hp-wmi: make rfkill initialization failure non-fatal

hp_wmi_rfkill_setup cleans up after itself now, so failing completely is
no longer necessary.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agohp-wmi: clear rfkill device pointers when appropriate
Anssi Hannula [Sun, 20 Feb 2011 18:07:24 +0000 (20:07 +0200)]
hp-wmi: clear rfkill device pointers when appropriate

NULLify rfkill pointers during initialization. This prevents dereference
of invalid pointer in case the driver is rebound and some rfkill device
isn't detected anymore. Clear them also in hp_wmi_rfkill_setup failure
path so that an rfkill initialization failure doesn't need to be fatal
for the whole driver.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agohp-wmi: split rfkill initialization out of hp_wmi_bios_setup
Anssi Hannula [Sun, 20 Feb 2011 18:07:23 +0000 (20:07 +0200)]
hp-wmi: split rfkill initialization out of hp_wmi_bios_setup

Split initialization of rfkill devices from hp_wmi_bios_setup() to
hp_wmi_rfkill_setup(). This makes the code somewhat cleaner, especially
with the future command 0x1b rfkill support.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agohp-wmi: allow setting input and output buffer sizes separately
Anssi Hannula [Sun, 20 Feb 2011 18:07:22 +0000 (20:07 +0200)]
hp-wmi: allow setting input and output buffer sizes separately

Split buffersize parameter of hp_wmi_perform_query to insize and
outsize. Existing callers are changed to use the same value for insize
and outsize to avoid any regressions, with the exception of
hp_wmi_set_block where the output buffer is unused and therefore outsize
is set to 0 (this change is not seen by BIOS code).

The maximum input buffer size is kept at 4 bytes as per struct
bios_args. Some commands exist that take longer buffers, but they
haven't been implemented. The data portion of bios_args can be trivially
made dynamically allocated later when such larger buffers become needed.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agohp-wmi: remove a variable that is never read
Anssi Hannula [Sun, 20 Feb 2011 18:07:21 +0000 (20:07 +0200)]
hp-wmi: remove a variable that is never read

Remove the status variable from hp_wmi_perform_query which holds the
return value from wmi_evaluate_method(). It is never checked as the
function bails out if the output buffer hasn't been allocated which
indicates the call failed.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agohp-wmi: check query return value in hp_wmi_perform_query
Anssi Hannula [Sun, 20 Feb 2011 18:07:20 +0000 (20:07 +0200)]
hp-wmi: check query return value in hp_wmi_perform_query

Check BIOS provided return value code in hp_wmi_perform_query and print
a warning on error. Printing is suppressed for HPWMI_RET_UNKNOWN_CMDTYPE
which is returned when the command type is unsupported.

Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agosony-laptop: implement new backlight control method
Mattia Dongili [Sat, 19 Feb 2011 02:52:32 +0000 (11:52 +0900)]
sony-laptop: implement new backlight control method

Reasonably recent Vaios have a 0x12f or 0x137 handler that exposes a
fine lid backlight regulation with values ranging from 0 to 255.
The patch is based on findings and code from Javier Achirica
<achirica@gmail.com> and Marco Chiappero <marco@absence.it>

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agosony-laptop: implement keyboard backlight support
Mattia Dongili [Sat, 19 Feb 2011 02:52:31 +0000 (11:52 +0900)]
sony-laptop: implement keyboard backlight support

Recent Vaios have the opportunity to control the keyboard backlight via
ACPI calls to the SNC device.
Introduce two module parameters to control how keyboard backlight should
be set at module loading (default to on and with 10 seconds timeout).

Tested-by: Marco Chiappero <marco@absence.it>
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agosony-laptop: cache handles and report them via sysfs
Mattia Dongili [Sat, 19 Feb 2011 02:52:30 +0000 (11:52 +0900)]
sony-laptop: cache handles and report them via sysfs

Avoid calling into acpi each time we need to lookup a method handle
and report the available handles to ease collection of information when
debugging issues. Also move initialization of the platform driver
earlier to allow adding files from other setup functions.

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agosony-laptop: remove unused Type4 define
Mattia Dongili [Sat, 19 Feb 2011 02:52:29 +0000 (11:52 +0900)]
sony-laptop: remove unused Type4 define

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agosony-laptop: use pr_<level> for messages
Mattia Dongili [Sat, 19 Feb 2011 02:52:28 +0000 (11:52 +0900)]
sony-laptop: use pr_<level> for messages

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>