[ALSA] hda-codec - Fix a typo

The AMP mute bit is bit 7.  No real influence since no one uses this
definition yet, though...

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Fix ALC880 uniwill auto-mutes

Fix the auto-mute controls of ALC880 uniwill model.  Split to two
individual functions to handle HP and front-mic mutes.  For front-mic
mute, use snd_hda_codec_amp_update() to be consistent with mixer.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Fix AD1988 SPDIF playback route control

Fix AD1988 SPDIF playback route control for selecting ADC1-3.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] wm8750 typo fix

I quuestion the testing status of that patch!

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] wavefront: only declare isapnp on CONFIG_PNP

From: David Rientjes <rientjes@google.com>
isapnp[] is only used for CONFIG_PNP.  If this configuration option is
not set, do not declare the array.
Cc: Adam Belay <ambx1@neo.rr.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - bug fixes for stac92xx HDA codecs.

* fixed surround playback on stac922x. Pin direction control bits were
  not being set correctly in stac92xx_set_pinctl(). Specifically it
  would refuse to set the port as an output if the port was already
  configured as an input. Last hunk (#8).
* fixed an input mux bug on 92xx codecs. When there is more than one
  possible input calculated for the muxes, the actual mux widget never
  gets set from its reset default, which is index 0, in the stac9221
  case that is port E. So alsamixer/amixer/gnome-mixer report the Mic
  as being the selected input source, but in fact is something else
  (line-in port E in stac9221 case). Another problem with this is that
  if you actually try to set the mux input to 'Mic', nothing happens
  because *cur_val == idx (see snd_hda_input_mux_put). You have to
  actually toggle input source to line-in then back to mic to actually
  set the mux widget. Hunk #7.
* fixed some typos in patch_sigmatel.c. Hunk #6.
* fix to stac92xx_add_dyn_out_pins() that fixes surround playback on
  codecs with less that 4 DACs (stac9205 for example). It reads the widget
  caps cache created by hda_codec to count the total number of analog DACs
  found. It then uses that to determine whether there will be enough
  independent DACs available for line/mic switch controls. Hunk #1, #2,
  and #3.
* improvements to stac92xx_auto_fill_dac_nids() to make it more general.
  This fixes surround playback on some codecs in combination with the
  fix to stac92xx_add_dyn_out_pins() above. It reads the full connection
  list now, instead of just the first entry, and then locates an analog
  DAC in the list. If one is found and it's free, assign it to that line-out.
  If no free DAC is found for the line-out, return -ENODEV. It also makes
  sure to actually select the chosen DAC if more than one DAC is input to
  the pin. Hunks #4, #5.

Signed-off-by: Steve Longerbeam <stevel@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] add MODULE_FIRMWARE entries

Add MODULE_FIRMWARE() entries, where appropriate.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] do not depend on FW_LOADER when internal firmware images are used

Since request_firmware() is no longer used when the internal firmware
images are used, it is no longer necessary to depend on FW_LOADER in
this case.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Fix resume of STAC92xx codecs

Added a missing call to resume mixer controls for STAC92xx codecs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] usbaudio - Revert the minimal period size fix patch

The last patch didn't really work (false report).
Although the hardware supports 125us minimum period, the current
usb-audio driver code assumes the 1ms period in many places.
Rollback the change.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Add support for new HP DV series laptops

This patch adds support for 3 new HP laptops to the Conexant
'Venice' driver.

Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] usb-audio - Fix the minimum period size per transfer mode

The minimal period size is 125us for high-speed mode while
1ms for full-speed mode.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] sound/pcmcia/vx/vxpocket.c: fix an if() condition

It seems noone ever tried to use this driver with more than one device.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] snd-emu10k1: Prevent E-Mu 1010 Notebook card from hanging PC.

E-Mu 1010 is not currently supported yet. Needs development work.

Signed-off-by: James Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] Add description of imac-intel model

Added the description of missing imac-intel model for hda-intel driver.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] snd_hda_intel: fix for intel imac

Add handling of Intel-iMac-specific pinconfig of the sound card.
Intel-iMac now handled as a separated subsystem.

Signed-off-by: Sylvain FORET <sylvain.foret@anu.edu.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-intel - Add ATI RS780,R600 HDMI audio support

This patch is for ATI RS780 and R600 HDMI support.

Signed-off-by: Wolke Liu <wolke.liu@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Prefer audio codec name as the mixer name

Prefer the name of audio codecs as the mixer name even if
modem codecs are probed before the audio codecs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] Don't use request_firmware if internal firmwares are defined

Don't use request_firmware() if the internal firmwares are defined
via Kconfig.  Otherwise it results in a significant delay at loading
time (minutes).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Fix model for ASUS A9rp

Fixed the model (asus-laptop) for ASUS A9rp with ALC660 codec.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] HDA-Intel: Fix headphone squeal on Conexant audio

This patch fixes the headphone squeal and noise on Conexant CX20551
(Waikiki) audio.

Signed-off-by: Tobin Davis <gruemaster@email.uophx.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ice1724 - Misc fixes for Prodigy192

- always set 256fs in SPDIF master clock mode
- disable deemphasis filter in AK4114 for Prodigy192

Signed-off-by: Pavel Hofman <dustin@seznam.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-intel - Fix detection of audio codec on Toshiba A100

Some boards have the audio codec on slot #3 while the modem codec
on slot #0.  The driver should continue to probe the slots when
no audio codec is found.
This fixes the problem of no device on Toshiba A100 (and some other
ATI SB450 devices).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Fix output pin types in auto configuration

Use PIN_HP output type for HP pin widgets accordingly, instead of
always applying PIN_OUT.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Add line_out_type to auto_pin_cfg struct

Added line_out_type field to auto_pin_cfg struct to provide the
pin type of default line_outs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Add support for Asus A8JN Laptop

This patch adds support for the Asus A8JN Laptop.
Other modes were tested, this one worked best.

Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] sound: fix incorrect use of platform_device_register()

The platform_device allocated by platform_device_alloc()
should be added to the device hierarchy by platform_device_add()
instead of platform_device_register().
Otherwise it will hit WARN_ON() in platform_device_register().
by illegal refcount.
This patch fixes such incorrect usages in portman2x4 and mts64 drivers.
Also it removes unnecessary trailing whitespaces.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Fix 8-channel auto-configuration

Fix the auto-configuration of 8-channel devices.  The sequence numbers
of usual 7.1 outputs are: 0/1/2/4 = Front/CLFE/Rear/Side

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] intel8x0 - Fix Oops in crash kernel

When intel8x0 driver is loaded in the crash kernel, it gets Oops
occasionally.  This is because the irq handler gets called before
the proper hardware initialization.  Now defer it after
snd_intel8x0_chip_init().
(reference: http://lkml.org/lkml/2007/3/5/252)

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] sound: SPIN_LOCK_UNLOCKED cleanup

SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead

Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Add support for Gigabyte S-Series GA-M57SLI-S4 motherboard

Added the support for Gigabyte S-Series GA-M57SLI-S4 motherboard
(model=6stack-dig).

Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Fix surround output on AD1986A

Fix surround output on AD1986A codec 3stack model.
The following bugs are fixed:
- init verbs for 3stack disabled the shared surround outputs
- a channel mode change resulted in the mute of surrounds

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ASoC Kconfig description

This patch makes the ASoC Kconfig descriptions a little more meaningful.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ASoC Samsung S3C24xx updates - i2s

This patch adds DMA size fields to the S3C24xx audio DMA params and
exports the S3C24xx I2S digital audio interface.

Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ASoC Samsung S3c24xx updates - audio DMA cleanup

This patch cleans up the audio DMA for the Samsung S3C24xx platform.

Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Add first generation macbook subsystem ID

First generation MacBooks were getting ignored by sigmatel drivers
and wrongly being identified as MACMINI. This patch makes them
identify as MACBOOK.

Signed-off-by: Abhijit Bhopatkar <bainonline@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ASoC export AC97 DAI

This patch exports the ASoC AC97 Digital Audio Interface as a GPL'ed
symbol.

Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ASoC WM8753 codec - build changes

This patch adds the WM8753 codec driver to the kernel build system.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] SoC WM8753 codec support

This patch series adds support for the WM8753 codec as found on the
OpenMoko Neo 1973 (other Neo 1973 and Samsung S3C24xx patches to follow
today) as well other new devices.
Features:-
 o HiFi and Voice DAI supported (inc runtime switching of DAI mode)
 o DAPM
 o All mixers
 o PLL calculator
 o 16,20 and 24bit samples.
 o WM8753 I2C ID added to include/linux/i2c-id.h
From: Liam Girdwood <lg@opensource.wolfsonmicro.com>

Signed-off-by: Harald Welte <laforge@openmoko.org>
Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Seth Forshee <seth.forshee@gmail.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ASoC AT91xxxx build fix

This patch by Frank Madarino updates the AT91xxxx Makefile and Kconfig
to build the renamed SSC files.
Changes:-
o Rename various i2s labels to ssc

Signed-off-by: Frank Mandarino <fmandarino@endrelia.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ASoC AT91xxxx eti B1 machine SSC changes

This patch by Frank Madarino updates the eti B1 machine to use the newer
AT91xxxx SSC core with the DSP/PCM audio hardware changes.
Changes:-
 o #include 'at91-ssc.h' instead of 'at91-i2s.h'
 o Rename various I2S labels to SSC

Signed-off-by: Frank Mandarino <fmandarino@endrelia.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ASoC AT91xxxx - SSC port DSP support

This patch series by Frank Madarino updates the AT91xxxx core to add
DSP/PCM audio hardware formats.
Changes:-
 o Rename at19-i2s.c -> at91-ssc.c
 o Rename at91-i2s.h -> at91-ssc.h
 o Add DSP hardware formats.
 o Rename various I2S labels to SSC

Signed-off-by: Frank Mandarino <fmandarino@endrelia.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ASoC DAPM switching for reentrant codec paths

This patch fixes an issue whereby power was applied to any inactive
analog path that would leave and reenter a codec (e.g. ACOP -> ACIN on
WM8753).  This change now checks for such paths and DAPM will power them
down when not in use.

Signed-off-by: Seth Forshee <seth.forshee@gmail.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ASoC WM9712 kmemdup

This patch creates the WM9712 codec register cache using kmemdup instead
of doing a kzalloc followed by a memcpy.

Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] Fix alsa-devel ML address

Fixed MAINTAINERS, alsa-devel ML is now subscribers-only.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Code clean up

Trivial code clean-ups to follow the standard coding styles.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-intel - Merge hda-codec module to a single module

Merge hda-codec module to a single hda-intel module since this is the
only user right now.  Although hda-codec stuff is designed to be used
universally from different controller drivers, currently only one
controller interface (and compatibles) are used.  So, let's merge them
to a single module to save memory.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Allow opening SPDIF while analog dup mode

Allow opening the dedicated SPDIF stream while running on analog dup
mode.  Then the SPDIF stream is once reset and assigned for the new
stream.  It's useful for exclusive SPDIF output like AC3/DTS.
(In the former version, you had to close once the analog stream to
 play the exclusive digital stream.)

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - clean up patch_realtek.c

Trivial code clean-ups of patch_realtek.c: indent and whitespace fixes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Add support of 96kHz back

Added the support of 96kHz sample rate back.  Although the rate isn't
listed in the ACC_PAR_PCM bits but si3054 codecs do support this rate
explicitly.  Now fixed the deteciton code not to check this extra bit.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Add ALC662 support

- Add ALC662 support
- Fixed no sound for [0x1631, 0xc017, 'PB V7900', ALC260_WILL]
- Fixed no sound for [0x161f, 0x2057, 'Replacer 672V', ALC260_REPLACER_672V]
- Add SKU ID for auto mode

Signed-off-by: Kailang Yang <kailang@realtek.com.tw>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ice1724 - Functioning support for Prodigy 192

Fixes:
--------
* correct card specific ice1724 initialization
* working IEC958 output of the card
* renamed capture controls
New features:
------------------
* analog input switch (line-in/mic)
* optional ak4114 based MI/ODI/O card detection & support: IEC958 input,
  digital input switch (toslink/coax)
Unresolved issues
-----------------------
* Analog and digital input enums are listed on playback panel of alsamixer,
  I do not know how to push them onto the capture one.

Signed-off-by: Pavel Hofman <dustin@seznam.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ice1724 - Add comments for naming of PCM streams

Added some comments regarding naming of PCM streams on vt172x chip.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ice1724 - call snd_ak4114_build() in juli

Call snd_ak4114_build() in juli support code to build proper mixer
elements for SPDIF inputs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] Fix misc bugs in i2c/others/ak4114.c

* correct register for 'IEC958 Non-PCM Bitstream', 'IEC958 DTS Bitstream'
  to use AK4114_REG_RCS0
* correct check for control name: if (strstr(kctl->id.name, 'Playback'))
* correct check: if (!chip->init) in snd_ak4114_external_rate
* added PCM control 'IEC958 PPL Lock Status'

Signed-off-by: Pavel Hofman <dustin@seznam.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] pcm_native: lockdep warning when launching jack

When launching 'jackd -d alsa', lockdep issues the following warning:
[39701.405086] =============================================
[39701.405093] [ INFO: possible recursive locking detected ]
[39701.405107] 2.6.21-rc5-mm4 #2
[39701.405109] ---------------------------------------------
[39701.405112] jackd/17366 is trying to acquire lock:
[39701.405114]  (&substream->self_group.lock){....}, at: [<c034d3c0>] snd_pcm_action_group+0x90/0x240
[39701.405131]
[39701.405131] but task is already holding lock:
[39701.405134]  (&substream->self_group.lock){....}, at: [<c034d63f>] snd_pcm_action_lock_irq+0x3f/0xb0
[39701.405141]
[39701.405142] other info that might help us debug this:
[39701.405145] 3 locks held by jackd/17366:
[39701.405147]  #0:  (snd_pcm_link_rwlock){....}, at: [<c034d627>] snd_pcm_action_lock_irq+0x27/0xb0
[39701.405155]  #1:  (&substream->group->lock){....}, at: [<c034d638>] snd_pcm_action_lock_irq+0x38/0xb0
[39701.405163]  #2:  (&substream->self_group.lock){....}, at: [<c034d63f>] snd_pcm_action_lock_irq+0x3f/0xb0
[39701.405171]
[39701.405171] stack backtrace:
[39701.405174]  [<c0103b8a>] show_trace_log_lvl+0x1a/0x30
[39701.405179]  [<c0104912>] show_trace+0x12/0x20
[39701.405183]  [<c01049c6>] dump_stack+0x16/0x20
[39701.405187]  [<c013b980>] __lock_acquire+0xbd0/0x1040
[39701.405193]  [<c013be60>] lock_acquire+0x70/0x90
[39701.405197]  [<c0407846>] _spin_lock+0x36/0x50
[39701.405203]  [<c034d3c0>] snd_pcm_action_group+0x90/0x240
[39701.405207]  [<c034d653>] snd_pcm_action_lock_irq+0x53/0xb0
[39701.405211]  [<c035046f>] snd_pcm_common_ioctl1+0x35f/0xfb0
[39701.405215]  [<c0351544>] snd_pcm_playback_ioctl1+0x34/0x420
[39701.405219]  [<c03519f3>] snd_pcm_playback_ioctl+0x43/0x50
[39701.405223]  [<c017ecc8>] do_ioctl+0x28/0x80
[39701.405229]  [<c017ed77>] vfs_ioctl+0x57/0x290
[39701.405233]  [<c017efe9>] sys_ioctl+0x39/0x60
[39701.405237]  [<c0102bf4>] sysenter_past_esp+0x5d/0x99
[39701.405240]  =======================
The attached lockdep annotation silences the warning.

Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Fix SPDIF output

Fix SPDIF output (at least on Realtek codecs).  The DIGI_CONVERT verbs
have to be reset before the PCM stream is set up.  Otherwise the digital
setup is screwed up.
Also, check the AMP capability before setting AMP of the digital out
widget.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ali5451 - Code clean up, irq handler fix

- Clean up ali5451.c, following the standard coding style, unneeded codes
  reduced, and removal of redundant variable initializations.
  Hungarian notation isn't fixed yet ;)
- Fix irq handler to return IRQ_NONE properly for shared irqs.
  Also check the hardware availability in irq handler to avoid possible
  initialization races at loading the driver.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ak4114 - Fix possible Oops with callbacks

ak4114 code may trigger Oops when the parameters are changed without
call of snd_ak4114_build().  Now it checks the existence of kctl
element, and the workq is triggered after building the necessary
kcontrols.
Also, did some code clean up.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] snd-usb-caiaq: Make playback work

some typo fixes.

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ice1724 - Fix AP192 4wire mode access

ap192_4wire_start() in ice1712/revo.c returns unsigned char
whereas it should return unsigned int.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] pcxhr - Minor optimization in trigger callback

Minor optimization in trigger start callback.  This fixes a nasty
compile warning, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] es1968 - Fix stuttering capture

Looks like the buffer size for the stereo capture has to be a
power of two.  Now added a constraint to buffer bytes.
Also removed unnecessary #if 0 lines.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Fix missing array terminators

Added missing array terminators in patch_conexant.c.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] snd-aoa-i2sbus: use MODULE_DEVICE_TABLE instead of plain MODULE_ALIAS

This patch changes snd-aoa-i2sbus to use MODULE_DEVICE_TABLE instead of
a hardcoded MODULE_ALIAS. Thanks to Sylvain Munaut for pointing this
out.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ak4114 - Fix a typo in DIF2 bit definition

Fixed a typo in AK4114_DIF2 bit definition.  This may fix some
problems for Audiophile 192 and Juli boards.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] sound: strlcpy is smart enough

strlcpy already accounts for the trailing zero in its length
computation, so there is no need to substract one to the buffer size.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] Add Native Instrument usb audio device support

Add snd-usb-caiaq driver to support caiaq usb-audio devices from
Native Instrument:
* Native Instruments RigKontrol2
* Native Instruments Kore Controller
* Native Instruments Audio Kontrol 1
* Native Instruments Audio 8 DJ

Signed-off-by: Daniel Mack <daniel@caiaq.org>
Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] azt3328.c: small cleanup patch

- change 'PCM' mixer control (pre/post 3D) to 'PCM Output Route'
- improve snd_azf3328_debug_show_ports
- less aggressive module init message
- document Bass/Treble non-bug (prompted by user report - Thank You!!)
- add some items to card description
- add some I/O register documentation
- enhance copyright

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Fix front/rear mic inputs on AD1986A codec

Fix the front/rear mic inputs on ASUS M2NPV-VM board with AD1986A
codec chip (3stack model).

Signed-off-by: Andrea Arcangeli <andrea@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-intel - Probe additional slots only if necessary

Probing the codec slots on ATI controller causes problems on some
devices like Acer laptops.  On these devices, reading from codec
slot 3 results in the communication failure with the codec chip.
Meanwhile, some laptops (e.g. Gateway) have the codec connection
only on slot 3, and probing this slot is mandatory for them.
The patch improves the probing robustness.  The additional slots
are now checked only when no codecs are found in the primary three
slots.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] Fix alsa-devel ML address

This replaces all occurences of alsa-devel@lists.s[ource]f[orge].net
that a simple recursive grep found in the current HG ALSA repos by
alsa-devel@alsa-project.org.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] fix SND_SOC Kconfig

The new ALSA 'SOC' support has bogus Kconfig ... it should
not be presenting anything AT91-related except on AT91,
or anything PXA-related except on PXA.  Right now, x86
sees both of those menus, as do all other platforms.
This patch removes needless Kconfig layering, and the
related inappropriate choice presentation.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] isa_bus device/driver naming

isa_bus: delete snd_ prefix from the (sysfs visible) device/driver names.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hdsp - Add support for fine tuning of sample rate support to HDSP 9632

Add 'DDS Sample Rate Offset' control. Allows values in Hz from -5000 to +5000.
The value is added to the nominal sample rate and written to the DDS register.

Signed-off-by: Julian Cable <julian_cable@yahoo.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Fix Macmini and Macbook pin configs

Original idea from Nicolas Boichat <nicolas@boichat.ch>.
The pin configurations of Macmini and MacBook (1st generation, at least)
seem identical with MacBook Pro (1st generation).

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ad1816a: Fix modprobe snd_mpu401 && modprobe snd_ad1816a

   The ad1816a driver fails if the mpu401 driver has been loaded first. This
patch against linux 2.6.20 fixes it by just ignoring the MPU-401 device in
that case, so that the rest of the sound card can be used. The ad1816a
driver already handles the MPU-401 device being unavailable due to lack of
resources in the same way.

Signed-off-by: Rask Ingemann Lambertsen <rask@sygehus.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] Fix conflicts between const and __devinitdata

Marvin told with a depressed face,
  gcc doesn't like both __devinitdata and const in the same line.
So, remove const from all over places now...

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ice1712: build fixes

  CC [M]  sound/pci/ice1712/ice1712.o
sound/pci/ice1712/ice1712.c:290: error: snd_ice1712_mixer_digmix_route_ac97 causes a section type conflict
sound/pci/ice1712/ice1712.c:1630: error: snd_ice1712_eeprom causes a section type conflict
...
Gcc like its __devinitdata readable not const, it seems.  An alternative
fix would be to remove the __devinitdata attribute but that would result
in slight runtime bloat.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda_intel: build fix

  CC [M]  sound/pci/hda/hda_intel.o
sound/pci/hda/hda_intel.c:1508: error: position_fix_list causes a section type conflict
Gcc like its __devinitdata readable not const, it seems.  An alternative
fix would be to remove the __devinitdata attribute but that would result
in slight runtime bloat.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] Delete unused header file sound/pci/au88x0/au88x0_sb.h

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] remove unused header file: sound/pci/cs46xx/imgs/cwcemb80.h

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Code clean up of patch_sigmatel.c

- Remove superfluous array member in stac9205_dmic_nids[]
- Use ARRAY_SIZE() instead of hard-coded numbers

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ac97 - Smart 5.1 for VIA 1617a codec

This patch provides a single 8 way enum called 'Smart 5.1 Select' with
some reasonable names for each enum that allows the user to choose
which of the 8 possible settings for vt1617a's version of what via
calls 'Smart 5.1'.

Signed-off-by: John Utz <john.utz@dmx.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Conexant improvements

This patch further improves on the Conexant Audio driver.
Adds support for Fujistu Siemens Si1520 series laptops.
Adds support for mic/line in on CX20549 based systems (aka 5045).
removes duplicated or unused controls (gpio, spdif) from test model.

Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Add Sony VGC-LA1 to patch_sigmatel.c

This patch adds the Sony Vaio VGC-LA1 to the stac9872_cfg_tbl.

Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] ac97 - Fix MSI L720 laptop

Fix internal speaker output of MSI L720 laptop with ALC655 codec.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] Kconfig: clarify help text for external firmware entries

The external firmware files are not in the alsa-plugins but in the
alsa-firmware package.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] Kconfig: fix FW_LOADER dependencies

Move the FW_LOADER dependencies out of the *_FIRMWARE_IN_KERNEL entries
because these drivers use the firmware loader regardless of whether
there is an in-kernel firmware image.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] soc - Fix dependencies in s3c24xx/Kconfig

Fixed dependencies in soc/s3c24xx/Kconfig file.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hdspm - Support for Master mode of AES32 and recent MADI

The current MADI driver was found not to completely work, at least on recent
MADI cards (rev 204), in particular at 96kHz. This patch solves this:
  * Add support of DDS feature
  * Channel map fixed
  * Channel/rate rules fixed
  * DMA allocation fixed (need to alloc for all channels and not only for the
    used ones)
Full support for AES32 master mode was added:
  * Add support of DDS feature
  * Channel map fixed
  * Channel/rate rules fixed

Signed-off-by: Remy Bruno <remy.bruno@trinnov.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] echoaudio - increase sleep time at loading firmware

The new ASIC code needs more time to set up.
(Note: the driver still works fine with the old firmware after this change.
The opposite is not true.)
From: Giuliano Pochini <pochini@shiny.it>

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] aoa: fix a sparse warning

This fixes a warning sparse gives.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] Fix compilation error in sparc/cs4231.c

Removed the unnecessary line I forgot in the last clean-up patch
wrt snd_pcm_group_for_each_entry().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] Fix NULL dereference with null modelname

Fix the NULL dereference of modelname option.  The check is moved to
find_codec_preset() now, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] hda-codec - Allow model=generic always for generic parser

Accept model=generic option to specify the generic parser regardless
of codec chips.  This is helpful for testing and debugging.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] Enable Kconfig options for external firmwares

Some drivers are already ifdefs for enabling external firmwares
but not defined in Kconfig.  Now they appear as the kernel configs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] mpu401 - Add MPU401_INFO_UART_ONLY bitflag

Added MPU401_INFO_UART_ONLY bitflag to avoid issueing UART_ENTER command
at opening streams.  Some devices support only UART mode and give errors
to UART_ENTER.
A new module option, uart_enter, is added to snd-mpu401 driver.
For UART-only devices, set uart_enter=0.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] bt87x - Add ATI TV-Wonder to the supported list

Added ATI TV-Wonder (1002:0001) to the supported list.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

[ALSA] is_power_of_2 in rtctimer.c

Replacing (n & (n-1)) in the context of power of 2 checks
with is_power_of_2

Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>