GitHub/LineageOS/G12/android_kernel_amlogic_linux-4.9.git
12 years ago[SCSI] libfc: Fix panic in fc_exch_recv
Bhanu Prakash Gollapudi [Sat, 11 Feb 2012 01:18:51 +0000 (17:18 -0800)]
[SCSI] libfc: Fix panic in fc_exch_recv

Adding and removing the host into the zone causes this panic.

BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0
IP: [<ffffffffa0491707>] fc_exch_recv+0xc57/0xe70 [libfc]
Call Trace:
[<ffffffffa050e04b>] bnx2fc_l2_rcv_thread+0x37b/0x430 [bnx2fc]
[<ffffffffa050dcd0>] ? bnx2fc_l2_rcv_thread+0x0/0x430 [bnx2fc]
[<ffffffff81090886>] kthread+0x96/0xa0
[<ffffffff8100c14a>] child_rip+0xa/0x20
[<ffffffff810907f0>] ? kthread+0x0/0xa0
[<ffffffff8100c140>] ? child_rip+0x0/0x20

During fc_exch_reset, the active exchanges are aborted and the exch is deleted.
As part of processing ABTS response, due to 'ep' being NULL, any access to ep in
fc_exch_recv_bls() causes this panic. Fixed to access 'ep' only if non-NULL.

Reviewed-by: Neerav Parikh <neerav.parikh@intel.com>
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] fcoe: Remove reference counting on 'stuct fcoe_interface'
Robert Love [Sat, 11 Feb 2012 01:18:46 +0000 (17:18 -0800)]
[SCSI] fcoe: Remove reference counting on 'stuct fcoe_interface'

The reference counting was necessary on these instances
because it was possible for NPIV ports to be destroyed
after the N_Port. A previous patch ensures that all NPIV
ports are destroyed before the N_Port making the need to
track references on the interface unnecessary.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] fcoe: Do not switch context in vport_delete callback
Robert Love [Sat, 11 Feb 2012 01:18:41 +0000 (17:18 -0800)]
[SCSI] fcoe: Do not switch context in vport_delete callback

Currently all port deletion is routed though the FCoE
workqueue (fcoe_wq). When fc_remove_host is called on
an N_Port (for example, from fcoe_destroy) the vports
are queued into a FC Transport workqueue. fc_remove_host
flushes that queue and each vport is passed to fcoe's
fcoe_vport_destroy, which simply queues the associated
fcoe_ports for later deletion. This queue cannot be
flushed within the N_Ports destroy path because of
circular locking issues. The result is that the NPIV
ports are destroyed after the N_Port, which is reverse
of how they are created.

This quirk causes fcoe to keep references on the
fcoe_interface shared by each of these ports (N_Port
and NPIV). Changing the ordering such that NPIV ports
are destroyed before the N_Port will allow us to remove
reference counting on the fcoe_interface instances.

This patch simply allows fcoe_vport_destory to destroy
NPIV ports without deferring them to a workqueue context.
This ensures that when fc_remove_host is called the
NPIV ports will be destroyed first before the N_Port and
allows reference counting on the fcoe's fcoe_interface
to be remove in a later patch.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] fcoe: Rename out_nomod label to out_putmod
Robert Love [Sat, 11 Feb 2012 01:18:36 +0000 (17:18 -0800)]
[SCSI] fcoe: Rename out_nomod label to out_putmod

The label implies that it should be called when
there is 'nomod.' I read that to mean that the
module reference 'get' failed. However, it's only
called when the module reference 'get' succeeded.

I think it makes more sense to name the label,
'out_putmod' since it should be called when we
need to 'put' the module reference taken in the
routine before returning.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] fcoe: Allow exposing FDMI attributes via sysfs
Neerav Parikh [Sat, 11 Feb 2012 01:18:31 +0000 (17:18 -0800)]
[SCSI] fcoe: Allow exposing FDMI attributes via sysfs

Allow FDMI attributes to be exposed via the fc_host
class object for the fcoe driver.

Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] libfcoe: Don't KERN_ERR on netdev notification
Robert Love [Sat, 11 Feb 2012 01:17:59 +0000 (17:17 -0800)]
[SCSI] libfcoe: Don't KERN_ERR on netdev notification

This is more of a debug statement. As a KERN_ERR we generate
log entries anytime any netdev goes up or down, so when booting
there are notification log entries for all system interfaces
including 'lo'. This is too much. Let's just log when necessary.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] isci: T10 DIF support
Dave Jiang [Fri, 10 Feb 2012 09:18:34 +0000 (01:18 -0800)]
[SCSI] isci: T10 DIF support

This allows the controller to do WRITE_INSERT and READ_STRIP for SAS
disks that support protection information. SAS disks must be formatted
with protection information to use this feature via sg_format.

  sg3_utils-1.32 -- sg_format version 1.19 20110730
  sg_format usage:
  sg_format --format --verbose --pinfo /dev/sda

Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Avoid invalid request queue dereference for bad response packets.
Arun Easi [Thu, 9 Feb 2012 19:16:01 +0000 (11:16 -0800)]
[SCSI] qla2xxx: Avoid invalid request queue dereference for bad response packets.

Signed-off-by: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Stop iteration after first failure in *_id functions.
Arun Easi [Thu, 9 Feb 2012 19:16:00 +0000 (11:16 -0800)]
[SCSI] qla2xxx: Stop iteration after first failure in *_id functions.

Signed-off-by: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Fix incorrect register access in qla2x00_start_iocbs().
Arun Easi [Thu, 9 Feb 2012 19:15:59 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Fix incorrect register access in qla2x00_start_iocbs().

Signed-off-by: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Handle device mapping changes due to device logout.
Arun Easi [Thu, 9 Feb 2012 19:15:58 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Handle device mapping changes due to device logout.

A device logout sent in the delete path of a fcport would clear the
port handle binding inside the firmware. This could lead to queued
work items for the fcport, if any, getting incorrect results. This
patch fixes the issue by checking for device name changes after a
call to get port database.

Signed-off-by: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Add ha->max_fibre_devices to keep track of the maximum number of...
Chad Dupuis [Thu, 9 Feb 2012 19:15:57 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Add ha->max_fibre_devices to keep track of the maximum number of targets.

Add a field to the qla_hw_data struct to allow us to set the maximum number of
fabric devices on a per adapter basis based on ISP type.

[jejb: fix up missing rval = QLA_SUCCESS to prevent uninit var warning]
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Cache swl during fabric discovery.
Andrew Vasquez [Thu, 9 Feb 2012 19:15:56 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Cache swl during fabric discovery.

Rather than continuously allocating and freeing swl within the discovery
process, simply pre-allocate it the first time that it's needed, cache it
through the rest of the lifecycle of the driver and free it at module unload.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Remove EDC sysfs interface.
Joe Carnuccio [Thu, 9 Feb 2012 19:15:55 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Remove EDC sysfs interface.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Update LICENSE.qla2xxx.
Chad Dupuis [Thu, 9 Feb 2012 19:15:54 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Update LICENSE.qla2xxx.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Perform firmware dump procedure on mailbox command timeout.
Chad Dupuis [Thu, 9 Feb 2012 19:15:53 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Perform firmware dump procedure on mailbox command timeout.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Change the log message when previous dump is available to retrieve...
Giridhar Malavali [Thu, 9 Feb 2012 19:15:52 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Change the log message when previous dump is available to retrieve for ISP82xx.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Log messages to use correct vha.
Arun Easi [Thu, 9 Feb 2012 19:15:51 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Log messages to use correct vha.

Signed-off-by: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Add new message when a new loopid is assigned.
Arun Easi [Thu, 9 Feb 2012 19:15:50 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Add new message when a new loopid is assigned.

Signed-off-by: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Fix ql_dbg arguments.
Arun Easi [Thu, 9 Feb 2012 19:15:49 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Fix ql_dbg arguments.

Signed-off-by: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Use ql_log* #define's in ql_log() and ql_log_pci().
Chad Dupuis [Thu, 9 Feb 2012 19:15:48 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Use ql_log* #define's in ql_log() and ql_log_pci().

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Convert remaining printk's to ql_log format.
Chad Dupuis [Thu, 9 Feb 2012 19:15:47 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Convert remaining printk's to ql_log format.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Print mailbox command opcode and return code when a command times...
Chad Dupuis [Thu, 9 Feb 2012 19:15:46 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Print mailbox command opcode and return code when a command times out.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Reduce mbx-command timeout for Login/Logout requests.
Andrew Vasquez [Thu, 9 Feb 2012 19:15:45 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Reduce mbx-command timeout for Login/Logout requests.

Don't use default 30 second mailbox-command timeout for these
serial requests, instead, limit the TMO to the standard 2*RATOV
plus some fudge-factor.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Prep zero-length BSG data-transfer requests.
Andrew Vasquez [Thu, 9 Feb 2012 19:15:44 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Prep zero-length BSG data-transfer requests.

During command failure/non-recognition, the upper-layer
FC-transport expects the drivers to set
job-reply->reply_payload_rcv_len.  Do this in a consistent manner
to avoid duplication.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Perform implicit logout during rport tear-down.
Andrew Vasquez [Thu, 9 Feb 2012 19:15:43 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Perform implicit logout during rport tear-down.

During rport tear-down, make sure we do an implicit LOGO of the fcport in our
firmware to try to clear any residual commands associated with that fcport.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Handle failure cases during fabric_login
Chad Dupuis [Thu, 9 Feb 2012 19:15:42 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Handle failure cases during fabric_login

Make sure that all calls to ha->isp_ops->fabric_login() check the
return value for failure.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Increase speed of flash access in ISP82xx adapters to improve firmwar...
Chad Dupuis [Thu, 9 Feb 2012 19:15:41 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Increase speed of flash access in ISP82xx adapters to improve firmware load speed.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Return blank sysfs string on initial get thermal failure.
Joe Carnuccio [Thu, 9 Feb 2012 19:15:40 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Return blank sysfs string on initial get thermal failure.

When thermal temperature initially fails, return a blank string to the
sysfs interface.  This fixes the initial display of 0.00 followed by
subsequent display of blank line; the initial 0.00 should have not
displayed for cards that do not support thermal temperature.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Handle change notifications based on switch scan results.
Arun Easi [Thu, 9 Feb 2012 19:15:39 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Handle change notifications based on switch scan results.

Instead of processing each RSCN individually, use only the name server results
from the switch to tell the existance of a given fcport.

Signed-off-by: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Correct print format for edc ql_log() calls.
Joe Carnuccio [Thu, 9 Feb 2012 19:15:38 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Correct print format for edc ql_log() calls.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Use consistent DL mask for ELS/CT passthru requests.
Andrew Vasquez [Thu, 9 Feb 2012 19:15:37 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Use consistent DL mask for ELS/CT passthru requests.

The driver is logging a slew of 'good' status requests for ELS/CT passthrough
commands.  Change some log messages from:

     * ql_log() -> ql_dbg()
     * ql_log_info -> ql_dbg_user

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Consolidation of SRB processing.
Giridhar Malavali [Thu, 9 Feb 2012 19:15:36 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Consolidation of SRB processing.

Rework the structures related to SRB processing to minimize the memory
allocations per I/O and manage resources associated with and completions
from common routines.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Use a valid enode-mac if none defined.
Andrew Vasquez [Thu, 9 Feb 2012 19:15:35 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Use a valid enode-mac if none defined.

Original 'defaults' were not OUI valid.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Enhancements to support ISP83xx.
Giridhar Malavali [Thu, 9 Feb 2012 19:15:34 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Enhancements to support ISP83xx.

Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Harish Zunjarrao <harish.zunjarrao@qlogic.com>
Signed-off-by: Nigel Kirkland <nigel.kirkland@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Enhanced the dump routines to capture multiple request and response...
Giridhar Malavali [Thu, 9 Feb 2012 19:15:33 +0000 (11:15 -0800)]
[SCSI] qla2xxx: Enhanced the dump routines to capture multiple request and response queues.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] aacraid: Added Sync.mode to support series 7/8/9 controllers
Mahesh Rajashekhara [Thu, 9 Feb 2012 06:51:04 +0000 (22:51 -0800)]
[SCSI] aacraid: Added Sync.mode to support series 7/8/9 controllers

Added Sync. mode to support Series 7/8/9 controller families: This is a
compatibility mode for all these controller families. The Async. (Performance)
mode can be changed in the future.  First Async. mode version added for Series
7; Controller parameter aac_sync_mode added

Signed-off-by: Mahesh Rajashekhara <aacraid@pmc-sierra.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] bnx2i: Fixed the override of the error_mask module param
Eddie Wai [Thu, 2 Feb 2012 23:22:00 +0000 (15:22 -0800)]
[SCSI] bnx2i: Fixed the override of the error_mask module param

The error_mask module param overrides has a bug which prevented
the new module param values to take effect.

Also changed the type attribute of the error_mask1/2 module params
from int to uint to allow the MSB to be set.

Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Acked-by: Anil Veerabhadrappa <anilgv@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] bnx2i: use kthread_create_on_node()
Eric Dumazet [Thu, 2 Feb 2012 13:03:22 +0000 (14:03 +0100)]
[SCSI] bnx2i: use kthread_create_on_node()

bnx2i_percpu_thread_create() create per cpu kthread, and should use
proper NUMA aware API.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] bfa: add readme file
Jing Huang [Sat, 28 Jan 2012 00:51:51 +0000 (16:51 -0800)]
[SCSI] bfa: add readme file

This patch add bfa driver readme file to Documentation/scsi

Signed-off-by: Jing Huang <huangj@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] bfa: don't leak mem in bfad_im_bsg_els_ct_request()
Jesper Juhl [Fri, 27 Jan 2012 23:23:41 +0000 (00:23 +0100)]
[SCSI] bfa: don't leak mem in bfad_im_bsg_els_ct_request()

If 'drv_fcxp = kzalloc(sizeof(struct bfad_fcxp), GFP_KERNEL);' fails
and returns NULL, then we'll leak the memory allocated to 'bsg_fcpt'
when we jump to 'out:' and the variable subsequently goes out of
scope.

Also remove the cast of the kzalloc() return value. kzalloc() returns
a void* which is implicitly converted, so the explicit cast is
pointless.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] isci: enable clock gating
Marcin Tomczak [Fri, 27 Jan 2012 19:14:50 +0000 (11:14 -0800)]
[SCSI] isci: enable clock gating

Enabling clock gating for power savings on entry to controller ready
state. Disable SCU clock gating for power savings on exit from the
controller ready state.

The gating is fully automated by silicon after setting the mode.

Signed-off-by: Marcin Tomczak <marcin.tomczak@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] libiscsi: fix cmd timeout/completion race
Mike Christie [Fri, 27 Jan 2012 03:13:11 +0000 (21:13 -0600)]
[SCSI] libiscsi: fix cmd timeout/completion race

If the driver/lib has called scsi_done and cleaned up internally but
scsi layer has not yet called blk_mark_rq_complete when the command
times out we hit a problem if the timeout code calls blk_mark_rq_complete first.
When the time out code calls into the driver we were returning
BLK_EH_RESET_TIMER and that causes the timeout code to just call
us again later.

We need to be calling BLK_EH_HANDLED so the timeout code can complete
the completion process because it had called blk_mark_rq_complete
on the command and now owns its processing.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] libiscsi_tcp: fix max_r2t manipulation
Mike Christie [Fri, 27 Jan 2012 03:13:10 +0000 (21:13 -0600)]
[SCSI] libiscsi_tcp: fix max_r2t manipulation

Problem description from Xi Wang:
A large max_r2t could lead to integer overflow in subsequent call to
iscsi_tcp_r2tpool_alloc(), allocating a smaller buffer than expected
and leading to out-of-bounds write.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] iscsi: fix setting of pid from netlink skb
Mike Christie [Fri, 27 Jan 2012 03:13:09 +0000 (21:13 -0600)]
[SCSI] iscsi: fix setting of pid from netlink skb

NETLINK_CREDS's pid now returns 0, so I guess we are supposed to
be using NETLINK_CB. This changed while the patch to export the
pid was getting merged upstream, so it was not noticed until both
the network and iscsi changes were in the same tree.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] iscsi: don't hang in endless loop if no targets present
Sasha Levin [Thu, 26 Jan 2012 03:16:16 +0000 (22:16 -0500)]
[SCSI] iscsi: don't hang in endless loop if no targets present

iscsi_if_send_reply() may return -ESRCH if there were no targets to send
data to. Currently we're ignoring this value and looping in attempt to do it
over and over, which will usually lead in a hung task like this one:

[ 4920.817298] INFO: task trinity:9074 blocked for more than 120 seconds.
[ 4920.818527] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 4920.819982] trinity         D 0000000000000000  5504  9074   2756 0x00000004
[ 4920.825374]  ffff880003961a98 0000000000000086 ffff8800001aa000 ffff8800001aa000
[ 4920.826791]  00000000001d4340 ffff880003961fd8 ffff880003960000 00000000001d4340
[ 4920.828241]  00000000001d4340 00000000001d4340 ffff880003961fd8 00000000001d4340
[ 4920.833231]
[ 4920.833519] Call Trace:
[ 4920.834010]  [<ffffffff826363fa>] schedule+0x3a/0x50
[ 4920.834953]  [<ffffffff82634ac9>] __mutex_lock_common+0x209/0x5b0
[ 4920.836226]  [<ffffffff81af805d>] ? iscsi_if_rx+0x2d/0x990
[ 4920.837281]  [<ffffffff81053943>] ? sched_clock+0x13/0x20
[ 4920.838305]  [<ffffffff81af805d>] ? iscsi_if_rx+0x2d/0x990
[ 4920.839336]  [<ffffffff82634eb0>] mutex_lock_nested+0x40/0x50
[ 4920.840423]  [<ffffffff81af805d>] iscsi_if_rx+0x2d/0x990
[ 4920.841434]  [<ffffffff810dffed>] ? sub_preempt_count+0x9d/0xd0
[ 4920.842548]  [<ffffffff82637bb0>] ? _raw_read_unlock+0x30/0x60
[ 4920.843666]  [<ffffffff821f71de>] netlink_unicast+0x1ae/0x1f0
[ 4920.844751]  [<ffffffff821f7997>] netlink_sendmsg+0x227/0x350
[ 4920.845850]  [<ffffffff821857bd>] ? sock_update_netprioidx+0xdd/0x1b0
[ 4920.847060]  [<ffffffff82185732>] ? sock_update_netprioidx+0x52/0x1b0
[ 4920.848276]  [<ffffffff8217f226>] sock_aio_write+0x166/0x180
[ 4920.849348]  [<ffffffff810dfe41>] ? get_parent_ip+0x11/0x50
[ 4920.850428]  [<ffffffff811d0d9a>] do_sync_write+0xda/0x120
[ 4920.851465]  [<ffffffff810dffed>] ? sub_preempt_count+0x9d/0xd0
[ 4920.852579]  [<ffffffff810dfe41>] ? get_parent_ip+0x11/0x50
[ 4920.853608]  [<ffffffff81791887>] ? security_file_permission+0x27/0xb0
[ 4920.854821]  [<ffffffff811d0f4c>] vfs_write+0x16c/0x180
[ 4920.855781]  [<ffffffff811d104f>] sys_write+0x4f/0xa0
[ 4920.856798]  [<ffffffff82638e79>] system_call_fastpath+0x16/0x1b
[ 4920.877487] 1 lock held by trinity/9074:
[ 4920.878239]  #0:  (rx_queue_mutex){+.+...}, at: [<ffffffff81af805d>] iscsi_if_rx+0x2d/0x990
[ 4920.880005] Kernel panic - not syncing: hung_task: blocked tasks

Signed-off-by: Sasha Levin <levinsasha928@gmail.com>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] fix the new host byte settings (DID_TARGET_FAILURE and DID_NEXUS_FAILURE)
Moger, Babu [Tue, 24 Jan 2012 20:38:46 +0000 (20:38 +0000)]
[SCSI] fix the new host byte settings (DID_TARGET_FAILURE and DID_NEXUS_FAILURE)

This patch fixes the host byte settings DID_TARGET_FAILURE and
DID_NEXUS_FAILURE.  The function __scsi_error_from_host_byte, tries to reset
the host byte to DID_OK. But that does not happen because of the OR operation.

Here is the flow.

scsi_softirq_done-> scsi_decide_disposition -> __scsi_error_from_host_byte

Let's take an example with DID_NEXUS_FAILURE. In scsi_decide_disposition,
result will be set as DID_NEXUS_FAILURE (=0x11). Then in
__scsi_error_from_host_byte, when we do OR with DID_OK.  Purpose is to reset
it back to DID_OK. But that does not happen.  This patch fixes this issue.

Signed-off-by: Babu Moger <babu.moger@netapp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] Correctly set the scsi host/msg/status bytes
Moger, Babu [Tue, 24 Jan 2012 20:38:42 +0000 (20:38 +0000)]
[SCSI] Correctly set the scsi host/msg/status bytes

Resubmitting as my previous post had format issues and did not go llinux-scsi.
This patch changes the function to set_msg_byte, set_host_byte and
set_driver_byte to correctly set the corresponding bytes appropriately.

It will reset the original setting and correctly set it to the new value.  The
previous OR operation does not always set it back to new value. Look at patch
2/2 for an example.

Signed-off-by: Babu Moger <babu.moger@netapp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] bnx2fc: Bumped version to 1.0.10
Bhanu Prakash Gollapudi [Tue, 24 Jan 2012 02:00:49 +0000 (18:00 -0800)]
[SCSI] bnx2fc: Bumped version to 1.0.10

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] bnx2fc: NPIV ports go offline when interface is brought down & up
Bhanu Prakash Gollapudi [Tue, 24 Jan 2012 02:00:48 +0000 (18:00 -0800)]
[SCSI] bnx2fc: NPIV ports go offline when interface is brought down & up

When there are 255 NPIV ports, and the interface is brought down & up, both
physical and NPIV ports are logged off and never logged back in. Since
discovery happens on single CPU, XID resources on that CPU will be limited,
which when exhausted the discovery fails. Increase the XID resource range to
ensure that the discovery completes successfully. Also ensure that
fc_exch_mgr_alloc() doesn't fail on the system that has lower number of CPUs.

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] bnx2fc: Handle LOGO flooding from the target
Bhanu Prakash Gollapudi [Tue, 24 Jan 2012 02:00:47 +0000 (18:00 -0800)]
[SCSI] bnx2fc: Handle LOGO flooding from the target

Host drops sessions when flood of unsolicited LOGOs are received from the
target. Because of unsufficient PLOGI retries, upon exceeding the retry count
of 3, the target sessions are dropped. Increased the retry count to 255 to
allow sufficient retries in this scenario.

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] bnx2fc: fix panic in bnx2fc_post_io_req
Bhanu Prakash Gollapudi [Tue, 24 Jan 2012 02:00:46 +0000 (18:00 -0800)]
[SCSI] bnx2fc: fix panic in bnx2fc_post_io_req

System panics while accessing stale pointer - timer_work_queue - in the IO path
before bnx2fc_stop is called. Fix is to destroy the workqueue after the destroy
operation is complete.

Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] fcoe: Allow exposing FDMI attributes via sysfs
Neerav Parikh [Mon, 23 Jan 2012 01:30:16 +0000 (17:30 -0800)]
[SCSI] fcoe: Allow exposing FDMI attributes via sysfs

Allow FDMI attributes to be exposed via the fc_host
class object for the fcoe driver.

Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Acked-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] fcoe: Add support for FDMI in fcoe
Neerav Parikh [Mon, 23 Jan 2012 01:30:10 +0000 (17:30 -0800)]
[SCSI] fcoe: Add support for FDMI in fcoe

This adds support for updating the FC-GS FDMI attributes
in the fcoe driver.

Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Acked-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] libfc: Add support for FDMI
Neerav Parikh [Mon, 23 Jan 2012 01:30:05 +0000 (17:30 -0800)]
[SCSI] libfc: Add support for FDMI

This patch adds support for Fabric Device Management
Interface as per FC-GS-4 spec. in libfc. Any driver
making use of libfc can enable fdmi state machine
for a given lport.

If lport has enabled FDMI support the lport state
machine will transition into FDMI after completing
the DNS states and before entering the SCR state.
The FDMI state transition is such that if there is an
error, it won't stop the lport state machine from
transitioning and the it will behave as if there was
no FDMI support.

The FDMI HBA attributes are registed with the Management
server via Register HBA (RHBA) command and the port
attributes are reigstered using the Register Port(RPA)
command.

Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Acked-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] libfc: Make the libfc Common Transport(CT) code generic
Neerav Parikh [Mon, 23 Jan 2012 01:30:00 +0000 (17:30 -0800)]
[SCSI] libfc: Make the libfc Common Transport(CT) code generic

Currently the libfc Common Transport(CT) calls assume that
the CT requests are Name Server specific only. This patch
makes it more flexible to allow more FC-GS services to make
use of these routines.

Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Acked-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] scsi_transport_fc: Getting FC Port Speed in sync with FC-GS
Neerav Parikh [Mon, 23 Jan 2012 01:29:55 +0000 (17:29 -0800)]
[SCSI] scsi_transport_fc: Getting FC Port Speed in sync with FC-GS

The values for the 4G and 10G speeds are not in sync with
definitions in SM-HBA/FC-GS-x/etc.
This patch brings them in sync to these specifications.

The values are converted to strings when represented via
sysfs attribute, hence that should cover for user space
apps as they may not see any change.

Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Acked-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] scsi_transport_fc: Add FDMI host attributes
Neerav Parikh [Mon, 23 Jan 2012 01:29:50 +0000 (17:29 -0800)]
[SCSI] scsi_transport_fc: Add FDMI host attributes

This adds FC-GS Fabric Device Management Interface
(FDMI) related attributes to fc_host_attr structure.

This is in preparation for allowing FDMI attributes
to be registered via libfc.

Signed-off-by: Neerav Parikh <neerav.parikh@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Acked-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] hpsa: use find_first_zero_bit
Akinobu Mita [Fri, 20 Jan 2012 15:15:27 +0000 (00:15 +0900)]
[SCSI] hpsa: use find_first_zero_bit

Use find_first_zero_bit to find the first cleared bit in a memory region.

This also includes the following minor changes.
- Use bitmap_zero
- Reduce unnecessary atomic bitops usage

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] scsi_debug: GET LBA STATUS response length correction
Douglas Gilbert [Fri, 20 Jan 2012 00:30:00 +0000 (19:30 -0500)]
[SCSI] scsi_debug: GET LBA STATUS response length correction

The SCSI GET LBA STATUS command was introduced in SBC-3 revision
20 in September 2009. At that time the Parameter Data Length
field in the response had an associated byte offset of 8.

Then in SBC-3 revision 25 (October 2010) that byte offset was
changed to 4. The sg_get_lba_status utility in sg3_utils version
1.33 (released earlier today) has been changed to calculate
the newer response length. However the implementation of
GET LBA STATUS command in the scsi_debug driver still uses the
original byte offset.

modify the Parameter Data Length field value in the GET LBA STATUS command
response to comply with the change in SBC-3 revision 25

Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] hpsa: update device attributes when they change
Scott Teel [Thu, 19 Jan 2012 20:01:30 +0000 (14:01 -0600)]
[SCSI] hpsa: update device attributes when they change

Certain types of changes to devices should not be interpreted as a device
change that would cause the device to be removed and re-added.  These include
RAID level and Firmware revision changes.  However, these attribute changes DO
need to be reflected in the controller info structure's dev structure list, so
that sysfs and /proc info files for the devices will reflect the new values.

Signed-off-by: Scott Teel <scott.stacy.teel@hp.com>
Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] hpsa: improve naming on external target device functions
Scott Teel [Thu, 19 Jan 2012 20:01:25 +0000 (14:01 -0600)]
[SCSI] hpsa: improve naming on external target device functions

Reduce confusion and inaccuracy caused by dated naming of vars and functions
referring to external target devices.

CURRENT NAMING:                PROPOSED NAMING:

"MSA2xxx devices"              "external target devices"
msa2xxx_model                  ext_target_model
is_msa2xxx                     is_ext_target
add_msa2xxx_enclosure          add_ext_target_dev
nmsa2xxx_enclosures            n_ext_target_devs

Signed-off-by: Scott Teel <scott.teel@hp.com>
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] hpsa: eliminate 8 external target limitation
Scott Teel [Thu, 19 Jan 2012 20:01:19 +0000 (14:01 -0600)]
[SCSI] hpsa: eliminate 8 external target limitation

Driver limits SAS external target IDs to range 1-8.
Need to increase limit and clean up overlapping concepts of targets and paths
in the code.

There are several defined constants that control this:
HPSA_MAX_TARGETS_PER_CTLR     16
MAX_MSA2XXX_ENCLOSURES        32
HPSA_MAX_PATHS                8

We can condense this to one constant:
MAX_EXT_TARGETS               32

SAS switches allow for 8 connections, and there is capacity for 4 switches per
enclosure in largest blade enclosure type.

Signed-off-by: Scott Teel <scott.teel@hp.com>
Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] hpsa: refactor hpsa_figure_bus_target_lun
Stephen M. Cameron [Thu, 19 Jan 2012 20:01:14 +0000 (14:01 -0600)]
[SCSI] hpsa: refactor hpsa_figure_bus_target_lun

It should call hpsa_set_bus_target_lun rather
than individually setting bus, target and lun.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] hpsa: make target and lun match what SCSI REPORT LUNs returns
Stephen M. Cameron [Thu, 19 Jan 2012 20:01:09 +0000 (14:01 -0600)]
[SCSI] hpsa: make target and lun match what SCSI REPORT LUNs returns

Some distros have a "rescan-scsi-bus.sh" script which depends on
SCSI REPORT LUNs not reporting something different than what the
driver tells the kernel, even if the driver uses scan_start and
scan_finished methods of the SCSI host template to override the
usual SCSI midlayer discovery code.  Previously, 1 was added to
the LUN to make room to insert the RAID controller device at
LUN 0.  Now, the RAID controller is moved to bus 3, and 1 is no
longer added to the LUN.  However, SCSI REPORT LUNS on Smart Array
doesn't report physical devices like tape drives or auto-loaders
as it turns out, so those particular device types still won't match.
Generally the logical drives are reported first however, so at
least those should match.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] hpsa: Fix problem with MSA2xxx devices
Stephen M. Cameron [Thu, 19 Jan 2012 20:01:04 +0000 (14:01 -0600)]
[SCSI] hpsa: Fix problem with MSA2xxx devices

Upgraded firmware on Smart Array P7xx (and some others) made them show up as
SCSI revision 5 devices and this caused the driver to fail to map MSA2xxx
logical drives to the correct bus/target/lun.  A symptom of this would be that
the target ID of the logical drives as presented by the external storage array
is ignored, and all such logical drives are assigned to target zero,
differentiated only by LUN.  Some multipath software reportedly does not deal
well with this behavior, failing to recognize different paths to the same
device as such.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Scott Teel <scott.teel@hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] hpsa: factor out driver name
Stephen M. Cameron [Thu, 19 Jan 2012 20:00:59 +0000 (14:00 -0600)]
[SCSI] hpsa: factor out driver name

Sometimes, for testing purposes (e.g. testing rmmod on a system
that normally boots using hpsa) it's nice to rename the driver
and split it into two drivers and restrict it to certain
controllers.  This makes that easier.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] hpsa: combine hpsa_scsi_detect and hpsa_register_scsi
Stephen M. Cameron [Thu, 19 Jan 2012 20:00:53 +0000 (14:00 -0600)]
[SCSI] hpsa: combine hpsa_scsi_detect and hpsa_register_scsi

hpsa_register_scsi just calls hpsa_scsi_detect.  Move
the guts of hpsa_scsi_detect into hpsa_register_scsi and
get rid of hpsa_scsi_detect.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] hpsa: removed unneeded structure member max_sg_entries and fix badly named...
Stephen M. Cameron [Thu, 19 Jan 2012 20:00:48 +0000 (14:00 -0600)]
[SCSI] hpsa: removed unneeded structure member max_sg_entries and fix badly named constant MAXSGENTRIES

We had both h->max_sg_entries and h->maxsgentries in the per controller
structure which is terribly confusing.  max_sg_entries was really
just a constant, 32, which defines how big the "block fetch table"
is, which is as large as the max number of SG elements embedded
within a command (excluding SG elements in chain blocks).

MAXSGENTRIES was the constant used to denote the max number of SG
elements embedded within a command, also a poor name.

So renamed MAXSGENTREIS to SG_ENTRIES_IN_CMD, and removed
h->max_sg_entries and replaced it with SG_ENTRIES_IN_CMD.

h->maxsgentries is unchanged, and is the maximum number of sg
elements the controller will support in a command, including
those in chain blocks, minus 1 for the chain block pointer..

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] hpsa: fix per device memory leak on driver unload
Stephen M. Cameron [Thu, 19 Jan 2012 20:00:42 +0000 (14:00 -0600)]
[SCSI] hpsa: fix per device memory leak on driver unload

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla4xxx: Update driver version to 5.02.00-k13
Vikas Chaudhary [Thu, 19 Jan 2012 11:06:57 +0000 (03:06 -0800)]
[SCSI] qla4xxx: Update driver version to 5.02.00-k13

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla4xxx: Added support to show port_state and port_speed in sysfs
Vikas Chaudhary [Thu, 19 Jan 2012 11:06:56 +0000 (03:06 -0800)]
[SCSI] qla4xxx: Added support to show port_state and port_speed in sysfs

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] scsi_transport_iscsi: Added support to show port_state and port_speed in sysfs
Vikas Chaudhary [Thu, 19 Jan 2012 11:06:55 +0000 (03:06 -0800)]
[SCSI] scsi_transport_iscsi: Added support to show port_state and port_speed in sysfs

sysfs patch to view port_state:
    /sys/class/iscsi_host/host*/port_state

sysfs patch to view port_speed:
    /sys/class/iscsi_host/host*/port_speed

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla4xxx: Added support to show targetalias in sysfs
Vikas Chaudhary [Thu, 19 Jan 2012 11:06:54 +0000 (03:06 -0800)]
[SCSI] qla4xxx: Added support to show targetalias in sysfs

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] libiscsi: Added support to show targetalias in sysfs
Vikas Chaudhary [Thu, 19 Jan 2012 11:06:53 +0000 (03:06 -0800)]
[SCSI] libiscsi: Added support to show targetalias in sysfs

sysfs patch to view target alias:
  /sys/class/iscsi_session/session*/targetalias

Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] lpfc 8.3.29: Update driver version to 8.3.29
James Smart [Wed, 18 Jan 2012 21:26:08 +0000 (16:26 -0500)]
[SCSI] lpfc 8.3.29: Update driver version to 8.3.29

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] lpfc 8.3.29: Remove GFP_KERNEL allocation while lock is held
James Smart [Wed, 18 Jan 2012 21:25:55 +0000 (16:25 -0500)]
[SCSI] lpfc 8.3.29: Remove GFP_KERNEL allocation while lock is held

Note: this is a replacement patch for the issue pointed out in
http://www.gossamer-threads.com/lists/linux/kernel/1477270

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] lpfc 8.3.29: Locking fix and Memory leak Fixes
James Smart [Wed, 18 Jan 2012 21:25:38 +0000 (16:25 -0500)]
[SCSI] lpfc 8.3.29: Locking fix and Memory leak Fixes

Locking fix and Memory leak Fixes

- Fix Locking code raises IRQ twice (NA)
- Fix mailbox and vpi memory leaks (126818)

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] lpfc 8.3.29: FC Discovery state machine fixes
James Smart [Wed, 18 Jan 2012 21:25:25 +0000 (16:25 -0500)]
[SCSI] lpfc 8.3.29: FC Discovery state machine fixes

FC Discovery state machine fixes.

- Fix bug with driver returning the inactive ndlp (125743)
- Fix discovery problem when in pt2pt by copying old ndlp state before
  state change (126887)
- Fix ndlp nodelist not empty wait timeout during driver unloading (127052)

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] lpfc 8.3.29: T10 Diff fixes and enhancements
James Smart [Wed, 18 Jan 2012 21:25:09 +0000 (16:25 -0500)]
[SCSI] lpfc 8.3.29: T10 Diff fixes and enhancements

T10 Diff fixes and enhancements:

- Add SLI4 Lancer support for T10 DIF / BlockGuard (121980)
- Fix SLI4 BlockGuard behavior when protection data is generated by HBA (121980)
- Enhance debugfs for injecting T10 DIF errors (123966, 132966)
- Fix Incorrect usage of bghm for BlockGuard errors (127022)

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] lpfc 8.3.29: SLI related fixes
James Smart [Wed, 18 Jan 2012 21:24:06 +0000 (16:24 -0500)]
[SCSI] lpfc 8.3.29: SLI related fixes

SLI related fixes:

- Fix REG_RPI fails on SLI4 HBA putting NPort into NPR state (126230)
- Fix ELS FDISC failing with local reject / invalid RPI. (126350)
- Fix reset port when reset is needed during fw_dump (125807)
- Fix unbounded firmware revision string from port cause panic (126560)
- Fix driver behavior when receiving an ADISC (126654)
- Fix driver not returning when bad ndlp found in abts error event
  handling (126209)
- Add more driver logs in area of SLI4 port error attention and reset
  recovery (126813, 124466)
- Fix failure in handling large CQ/EQ identifiers in an IOV
  environment (126856)
- Fix for driver using duplicate RPIs after lancer port reset (126723)
- Clear vport->fc_myDID in lpfc_els_issue_fdisc to guarentee a
  zero SID (126779, 126897)
- Fix for SLI4 Port delivery for BLS ABORT ACC (126289)

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] lpfc 8.3.29: BSG and User interface fixes
James Smart [Wed, 18 Jan 2012 21:23:48 +0000 (16:23 -0500)]
[SCSI] lpfc 8.3.29: BSG and User interface fixes

BSG and User interface fixes:

- Fix driver processing an els command using 16Gb FC Adapter (126345)
- Change SLI4 FC port internal loopback to inner internal (126409)
- Fix bug with driver dump command type 4 using 16Gb FC Adapter (126406)
- Create character device to take a reference on the driver (126082)

Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] pm8001: deficient responses to IO_XFER_ERROR_BREAK and IO_XFER_OPEN_RETRY_TIMEOUT
Mark Salyzyn [Tue, 17 Jan 2012 16:52:24 +0000 (11:52 -0500)]
[SCSI] pm8001: deficient responses to IO_XFER_ERROR_BREAK and IO_XFER_OPEN_RETRY_TIMEOUT

IO_XFER_ERROR_BREAK and IO_XFER_OPEN_RETRY_TIMEOUT are deficient of the
required actions as outlined in the programming manual for the pm8001. Due to
the overlapping code requirements of these recovery responses, we found it
necessary to bundle them together into one patch.

When a break is received during the command phase (ssp_completion), this is a
result of a timeout or interruption on the bus. Logic suggests that we should
retry the command.

When a break is received during the data-phase (ssp_event), the task must be
aborted on the target or it will retain a data-phase lock turning the target
reticent to all future media commands yet will successfully respond to TUR,
INQUIRY and ABORT leading eventually to target failure through several
abort-cycle loops.

The open retry interval is exceedingly short resulting in occasional target
drop-off during expander resets or when targets push-back during bad-block
remapping. Increased effective timeout from 130ms to 1.5 seconds for each try
so as to trigger after the administrative inquiry/tur timeout in the scsi
subsystem to keep error-recovery harmonics to a minimum.

When an open retry timeout event is received, the action required by the
targets is to issue an abort for the outstanding command then logic suggests
we retry the command as this state is usually an indication of a credit block
or busy condition on the target.

We hijacked the pm8001_handle_event work queue handler so that it will handle
task as an argument instead of device for the workers in support of the
deferred handling outlined above.

Moderate to Heavy bad-path testing on a 2.6.32 vintage kernel, compile-testing
on scsi-misc-2.6 kernel ...

Signed-off-by: Mark Salyzyn <mark_salyzyn@xyratex.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] pm8001: Add FUNC_GET_EVENTS
Mark Salyzyn [Tue, 17 Jan 2012 14:18:57 +0000 (09:18 -0500)]
[SCSI] pm8001: Add FUNC_GET_EVENTS

Jack noticed I dropped a patch fragment associated with a flags automatic
variable in mpi_set_phys_g3_with_ssc (ooops) and that the pre-emptive locking
that piggy-backed this patch was not in-fact necessary because of underlying
atomic accesses to the hardware. Here is the updated patch fixing these two
issues.

The pm8001 driver is missing the FUNC_GET_EVENTS handler in the phy control
function. Since the pm8001_bar4_shift function was not designed to be called
at runtime, added locking surrounding the adjustment for all accesses.

Signed-off-by: Mark Salyzyn <mark_salyzyn@xyratex.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] pm8001: fix lockup on phy_control hard reset.
Mark Salyzyn [Tue, 17 Jan 2012 17:56:45 +0000 (12:56 -0500)]
[SCSI] pm8001: fix lockup on phy_control hard reset.

pm8001_phy_control PHY_FUNC_HARD_RESET locks up on second try via
smp_phy_control because response HW_EVENT_PHY_START_STATUS fails to complete
previous command. The PM8001F_RUN_TIME flag is not treated as a bit, but a
state in all readers, yet once we are operational or in the run time state,
the flags use a bit-set operation.

Signed-off-by: Mark Salyzyn <mark_salyzyn@xyratex.com>
Acked-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] st: implement PM
Oliver Neukum [Sat, 14 Jan 2012 23:16:51 +0000 (00:16 +0100)]
[SCSI] st: implement PM

This implements basic power management for SCSI tapes.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] scsi_pm: Fix bug in the SCSI power management handler
Alan Stern [Fri, 17 Feb 2012 21:25:08 +0000 (16:25 -0500)]
[SCSI] scsi_pm: Fix bug in the SCSI power management handler

This patch (as1520) fixes a bug in the SCSI layer's power management
implementation.

LUN scanning can be carried out asynchronously in do_scan_async(), and
sd uses an asynchronous thread for the time-consuming parts of disk
probing in sd_probe_async().  Currently nothing coordinates these
async threads with system sleep transitions; they can and do attempt
to continue scanning/probing SCSI devices even after the host adapter
has been suspended.  As one might expect, the outcome is not ideal.

This is what the "prepare" stage of system suspend was created for.
After the prepare callback has been called for a host, target, or
device, drivers are not allowed to register any children underneath
them.  Currently the SCSI prepare callback is not implemented; this
patch rectifies that omission.

For SCSI hosts, the prepare routine calls scsi_complete_async_scans()
to wait until async scanning is finished.  It might be slightly more
efficient to wait only until the host in question has been scanned,
but there's currently no way to do that.  Besides, during a sleep
transition we will ultimately have to wait until all the host scanning
has finished anyway.

For SCSI devices, the prepare routine calls async_synchronize_full()
to wait until sd probing is finished.  The routine does nothing for
SCSI targets, because asynchronous target scanning is done only as
part of host scanning.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@kernel.org>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] scsi_scan: Fix 'Poison overwritten' warning caused by using freed 'shost'
Huajun Li [Sun, 12 Feb 2012 11:59:14 +0000 (19:59 +0800)]
[SCSI] scsi_scan: Fix 'Poison overwritten' warning caused by using freed 'shost'

In do_scan_async(), calling scsi_autopm_put_host(shost) may reference
freed shost, and cause Posison overwitten warning.
Yes, this case can happen, for example, an USB is disconnected just
when do_scan_async() thread starts to run, then scsi_host_put() called
in scsi_finish_async_scan() will lead to shost be freed(because the
refcount of shost->shost_gendev decreases to 1 after USB disconnects),
at this point, if references shost again, system will show following
warning msg.

To make scsi_autopm_put_host(shost) always reference a valid shost,
put it just before scsi_host_put() in function
scsi_finish_async_scan().

[  299.281565] =============================================================================
[  299.281634] BUG kmalloc-4096 (Tainted: G          I ): Poison overwritten
[  299.281682] -----------------------------------------------------------------------------
[  299.281684]
[  299.281752] INFO: 0xffff880056c305d0-0xffff880056c305d0. First byte
0x6a instead of 0x6b
[  299.281816] INFO: Allocated in scsi_host_alloc+0x4a/0x490 age=1688
cpu=1 pid=2004
[  299.281870]  __slab_alloc+0x617/0x6c1
[  299.281901]  __kmalloc+0x28c/0x2e0
[  299.281931]  scsi_host_alloc+0x4a/0x490
[  299.281966]  usb_stor_probe1+0x5b/0xc40 [usb_storage]
[  299.282010]  storage_probe+0xa4/0xe0 [usb_storage]
[  299.282062]  usb_probe_interface+0x172/0x330 [usbcore]
[  299.282105]  driver_probe_device+0x257/0x3b0
[  299.282138]  __driver_attach+0x103/0x110
[  299.282171]  bus_for_each_dev+0x8e/0xe0
[  299.282201]  driver_attach+0x26/0x30
[  299.282230]  bus_add_driver+0x1c4/0x430
[  299.282260]  driver_register+0xb6/0x230
[  299.282298]  usb_register_driver+0xe5/0x270 [usbcore]
[  299.282337]  0xffffffffa04ab03d
[  299.282364]  do_one_initcall+0x47/0x230
[  299.282396]  sys_init_module+0xa0f/0x1fe0
[  299.282429] INFO: Freed in scsi_host_dev_release+0x18a/0x1d0 age=85
cpu=0 pid=2008
[  299.282482]  __slab_free+0x3c/0x2a1
[  299.282510]  kfree+0x296/0x310
[  299.282536]  scsi_host_dev_release+0x18a/0x1d0
[  299.282574]  device_release+0x74/0x100
[  299.282606]  kobject_release+0xc7/0x2a0
[  299.282637]  kobject_put+0x54/0xa0
[  299.282668]  put_device+0x27/0x40
[  299.282694]  scsi_host_put+0x1d/0x30
[  299.282723]  do_scan_async+0x1fc/0x2b0
[  299.282753]  kthread+0xdf/0xf0
[  299.282782]  kernel_thread_helper+0x4/0x10
[  299.282817] INFO: Slab 0xffffea00015b0c00 objects=7 used=7 fp=0x
      (null) flags=0x100000000004080
[  299.282882] INFO: Object 0xffff880056c30000 @offset=0 fp=0x          (null)
[  299.282884]
...

Signed-off-by: Huajun Li <huajun.li.lee@gmail.com>
Cc: stable@kernel.org
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Update version number to 8.03.07.13-k.
Chad Dupuis [Thu, 9 Feb 2012 19:14:13 +0000 (11:14 -0800)]
[SCSI] qla2xxx: Update version number to 8.03.07.13-k.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Proper detection of firmware abort error code for ISP82xx.
Giridhar Malavali [Thu, 9 Feb 2012 19:14:12 +0000 (11:14 -0800)]
[SCSI] qla2xxx: Proper detection of firmware abort error code for ISP82xx.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Remove resetting memory during device initialization for ISP82xx.
Shyam Sundar [Thu, 9 Feb 2012 19:14:11 +0000 (11:14 -0800)]
[SCSI] qla2xxx: Remove resetting memory during device initialization for ISP82xx.

With IOs running and PegHalt testing the system reboots when memory reset is
performed during device initialization.

Signed-off-by: Shyam Sundar <shyam.sundar@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Complete mailbox command timedout to avoid initialization failures...
Giridhar Malavali [Thu, 9 Feb 2012 19:14:10 +0000 (11:14 -0800)]
[SCSI] qla2xxx: Complete mailbox command timedout to avoid initialization failures during next reset cycle.

Complete the mailbox command timed out before initiating another abort cycle
to recover so that mailbox commands issued during next reset cycle don't fail
due to pending mailbox access timeout.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Remove check for null fcport from host reset handler.
Michael Christie [Thu, 9 Feb 2012 19:14:09 +0000 (11:14 -0800)]
[SCSI] qla2xxx: Remove check for null fcport from host reset handler.

Remove the check for a NULL fcport so that the host reset will run
unconditionally to unwedge any commands before the device is offlined and to
prevent a quick runthrough of the SCSI error handling.

Signed-off-by: Michael Christie <mchristi@redhat.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Correct out of bounds read of ISP2200 mailbox registers.
Andrew Vasquez [Thu, 9 Feb 2012 19:14:08 +0000 (11:14 -0800)]
[SCSI] qla2xxx: Correct out of bounds read of ISP2200 mailbox registers.

ISP2200 adapters only have 24 mailbox registers so read only that many.

Reported-by: Olatunji Ruwase <oor@cs.cmu.edu>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Remove errant clearing of MBX_INTERRUPT flag during CT-IOCB processing.
Andrew Vasquez [Thu, 9 Feb 2012 19:14:07 +0000 (11:14 -0800)]
[SCSI] qla2xxx: Remove errant clearing of MBX_INTERRUPT flag during CT-IOCB processing.

This can cause instability in mailbox command state machine handling.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Clear options-flags while issuing stop-firmware mbx command.
Andrew Vasquez [Thu, 9 Feb 2012 19:14:06 +0000 (11:14 -0800)]
[SCSI] qla2xxx: Clear options-flags while issuing stop-firmware mbx command.

Not clearing the options flags in mbx1 could lead the firmware
into interpreting old data in mbx1 through mbx8.  This could
lead to inadvertent DMA read/write operations to stale memory.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Add an "is reset active" helper.
Andrew Vasquez [Thu, 9 Feb 2012 19:14:05 +0000 (11:14 -0800)]
[SCSI] qla2xxx: Add an "is reset active" helper.

Many locations within the driver would use an inconsistent set of
checks to determine ISP-reset state.  Consolidate the checks into
this inline-helper.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Add check for null fcport references in qla2xxx_queuecommand.
Chad Dupuis [Thu, 9 Feb 2012 19:14:04 +0000 (11:14 -0800)]
[SCSI] qla2xxx: Add check for null fcport references in qla2xxx_queuecommand.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] qla2xxx: Propagate up abort failures.
Arun Easi [Thu, 9 Feb 2012 19:14:03 +0000 (11:14 -0800)]
[SCSI] qla2xxx: Propagate up abort failures.

Signed-off-by: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
12 years ago[SCSI] isci: Fix NULL ptr dereference when no firmware is being loaded
Dave Jiang [Fri, 27 Jan 2012 19:17:37 +0000 (11:17 -0800)]
[SCSI] isci: Fix NULL ptr dereference when no firmware is being loaded

NULL orom ptr passed in for verification which caused page fault.
We will set a default version when we don't have orom struct.

Reported-by: Dan Melnic <dan@seamicro.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>