GitHub/exynos8895/android_kernel_samsung_universal8895.git
11 years ago[SCSI] fnic: FIP VLAN Discovery Feature Support
Hiral Patel [Tue, 26 Feb 2013 00:18:36 +0000 (16:18 -0800)]
[SCSI] fnic: FIP VLAN Discovery Feature Support

FIP VLAN discovery discovers the FCoE VLAN that will be used by all other FIP
protocols as well as by the FCoE encapsulation for Fibre Channel payloads on
the established virtual link. One of the goals of FC-BB-5 was to be as
nonintrusive as possible on initiators and targets, and therefore FIP VLAN
discovery occurs in the native VLAN used by the initiator or target to
exchange Ethernet traffic. The FIP VLAN discovery protocol is the only FIP
protocol running on the native VLAN; all other FIP protocols run on the
discovered FCoE VLANs.

If an administrator has manually configured FCoE VLANs on ENodes and FCFs,
there is no need to use this protocol. FIP and FCoE will run over the
configured VLANs.

An ENode without FCoE VLANs configuration would use this automated discovery
protocol to discover over which VLANs FCoE is running.

The ENode sends a FIP VLAN discovery request to a multicast MAC address called
All-FCF-MACs, which is a multicast MAC address to which all FCFs listen.

All FCFs that can be reached in the native VLAN of the ENode are expected to
respond on the same VLAN with a response that lists one or more FCoE VLANs
that are available for the ENode's VN_Port login. This protocol has the sole
purpose of allowing the ENode to discover all the available FCoE VLANs.

Now the ENode may enable a subset of these VLANs for FCoE Running the FIP
protocol in these VLANs on a per VLAN basis. And FCoE data transactions also
would occur on this VLAN. Hence, Except for FIP VLAN discovery, all other FIP
and FCoE traffic runs on the selected FCoE VLAN.  Its only the FIP VLAN
Discovery protocol that is permitted to run on the Default native VLAN of the
system.

[**** NOTE ****]
We are working on moving this feature definitions and functionality to libfcoe
module. We need this patch to be approved, as Suse is looking forward to merge
this feature in SLES 11 SP3 release.  Once this patch is approved, we will
submit patch which should move vlan discovery feature to libfoce.

[Fengguang Wu <fengguang.wu@intel.com>: kmalloc cast removal]
Signed-off-by: Anantha Prakash T <atungara@cisco.com>
Signed-off-by: Hiral Patel <hiralpat@cisco.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Linus Torvalds [Wed, 1 May 2013 21:08:52 +0000 (14:08 -0700)]
Merge git://git./linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Highlights (1721 non-merge commits, this has to be a record of some
  sort):

   1) Add 'random' mode to team driver, from Jiri Pirko and Eric
      Dumazet.

   2) Make it so that any driver that supports configuration of multiple
      MAC addresses can provide the forwarding database add and del
      calls by providing a default implementation and hooking that up if
      the driver doesn't have an explicit set of handlers.  From Vlad
      Yasevich.

   3) Support GSO segmentation over tunnels and other encapsulating
      devices such as VXLAN, from Pravin B Shelar.

   4) Support L2 GRE tunnels in the flow dissector, from Michael Dalton.

   5) Implement Tail Loss Probe (TLP) detection in TCP, from Nandita
      Dukkipati.

   6) In the PHY layer, allow supporting wake-on-lan in situations where
      the PHY registers have to be written for it to be configured.

      Use it to support wake-on-lan in mv643xx_eth.

      From Michael Stapelberg.

   7) Significantly improve firewire IPV6 support, from YOSHIFUJI
      Hideaki.

   8) Allow multiple packets to be sent in a single transmission using
      network coding in batman-adv, from Martin Hundebøll.

   9) Add support for T5 cxgb4 chips, from Santosh Rastapur.

  10) Generalize the VXLAN forwarding tables so that there is more
      flexibility in configurating various aspects of the endpoints.
      From David Stevens.

  11) Support RSS and TSO in hardware over GRE tunnels in bxn2x driver,
      from Dmitry Kravkov.

  12) Zero copy support in nfnelink_queue, from Eric Dumazet and Pablo
      Neira Ayuso.

  13) Start adding networking selftests.

  14) In situations of overload on the same AF_PACKET fanout socket, or
      per-cpu packet receive queue, minimize drop by distributing the
      load to other cpus/fanouts.  From Willem de Bruijn and Eric
      Dumazet.

  15) Add support for new payload offset BPF instruction, from Daniel
      Borkmann.

  16) Convert several drivers over to mdoule_platform_driver(), from
      Sachin Kamat.

  17) Provide a minimal BPF JIT image disassembler userspace tool, from
      Daniel Borkmann.

  18) Rewrite F-RTO implementation in TCP to match the final
      specification of it in RFC4138 and RFC5682.  From Yuchung Cheng.

  19) Provide netlink socket diag of netlink sockets ("Yo dawg, I hear
      you like netlink, so I implemented netlink dumping of netlink
      sockets.") From Andrey Vagin.

  20) Remove ugly passing of rtnetlink attributes into rtnl_doit
      functions, from Thomas Graf.

  21) Allow userspace to be able to see if a configuration change occurs
      in the middle of an address or device list dump, from Nicolas
      Dichtel.

  22) Support RFC3168 ECN protection for ipv6 fragments, from Hannes
      Frederic Sowa.

  23) Increase accuracy of packet length used by packet scheduler, from
      Jason Wang.

  24) Beginning set of changes to make ipv4/ipv6 fragment handling more
      scalable and less susceptible to overload and locking contention,
      from Jesper Dangaard Brouer.

  25) Get rid of using non-type-safe NLMSG_* macros and use nlmsg_*()
      instead.  From Hong Zhiguo.

  26) Optimize route usage in IPVS by avoiding reference counting where
      possible, from Julian Anastasov.

  27) Convert IPVS schedulers to RCU, also from Julian Anastasov.

  28) Support cpu fanouts in xt_NFQUEUE netfilter target, from Holger
      Eitzenberger.

  29) Network namespace support for nf_log, ebt_log, xt_LOG, ipt_ULOG,
      nfnetlink_log, and nfnetlink_queue.  From Gao feng.

  30) Implement RFC3168 ECN protection, from Hannes Frederic Sowa.

  31) Support several new r8169 chips, from Hayes Wang.

  32) Support tokenized interface identifiers in ipv6, from Daniel
      Borkmann.

  33) Use usbnet_link_change() helper in USB net driver, from Ming Lei.

  34) Add 802.1ad vlan offload support, from Patrick McHardy.

  35) Support mmap() based netlink communication, also from Patrick
      McHardy.

  36) Support HW timestamping in mlx4 driver, from Amir Vadai.

  37) Rationalize AF_PACKET packet timestamping when transmitting, from
      Willem de Bruijn and Daniel Borkmann.

  38) Bring parity to what's provided by /proc/net/packet socket dumping
      and the info provided by netlink socket dumping of AF_PACKET
      sockets.  From Nicolas Dichtel.

  39) Fix peeking beyond zero sized SKBs in AF_UNIX, from Benjamin
      Poirier"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1722 commits)
  filter: fix va_list build error
  af_unix: fix a fatal race with bit fields
  bnx2x: Prevent memory leak when cnic is absent
  bnx2x: correct reading of speed capabilities
  net: sctp: attribute printl with __printf for gcc fmt checks
  netlink: kconfig: move mmap i/o into netlink kconfig
  netpoll: convert mutex into a semaphore
  netlink: Fix skb ref counting.
  net_sched: act_ipt forward compat with xtables
  mlx4_en: fix a build error on 32bit arches
  Revert "bnx2x: allow nvram test to run when device is down"
  bridge: avoid OOPS if root port not found
  drivers: net: cpsw: fix kernel warn on cpsw irq enable
  sh_eth: use random MAC address if no valid one supplied
  3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
  tg3: fix to append hardware time stamping flags
  unix/stream: fix peeking with an offset larger than data in queue
  unix/dgram: fix peeking with an offset larger than data in queue
  unix/dgram: peek beyond 0-sized skbs
  openvswitch: Remove unneeded ovs_netdev_get_ifindex()
  ...

11 years agofilter: fix va_list build error
Xi Wang [Wed, 1 May 2013 20:24:08 +0000 (16:24 -0400)]
filter: fix va_list build error

This patch fixes the following build error.

In file included from include/linux/filter.h:52:0,
                 from arch/arm/net/bpf_jit_32.c:14:
include/linux/printk.h:54:2: error: unknown type name ‘va_list’
include/linux/printk.h:105:21: error: unknown type name ‘va_list’
include/linux/printk.h:108:30: error: unknown type name ‘va_list’

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Wed, 1 May 2013 20:20:04 +0000 (13:20 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:
 "Assorted fixes and cleanups to the existing drivers plus a new driver
  for IMS Passenger Control Unit device they use for ther in-flight
  entertainment system."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits)
  Input: trackpoint - Optimize trackpoint init to use power-on reset
  Input: apbps2 - convert to devm_ioremap_resource()
  Input: ALPS - use %ph to print buffers
  ARM - shmobile: Armadillo800EVA: Move st1232 reset pin handling
  Input: st1232 - add reset pin handling
  Input: st1232 - convert to devm_* infrastructure
  Input: MT - handle semi-mt devices in core
  Input: adxl34x - use spi_get_drvdata()
  Input: ad7877 - use spi_get_drvdata() and spi_set_drvdata()
  Input: ads7846 - use spi_get_drvdata() and spi_set_drvdata()
  Input: ims-pcu - fix a memory leak on error
  Input: sysrq - supplement reset sequence with timeout functionality
  Input: tegra-kbc - support for defining row/columns based on SoC
  Input: imx_keypad - switch to using managed resources
  Input: arc_ps2 - add support for device tree
  Input: mma8450 - fix signed 12bits to 32bits conversion
  Input: eeti_ts - remove redundant null check
  Input: edt-ft5x06 - remove redundant null check before kfree
  Input: ad714x - add CONFIG_PM_SLEEP to suspend/resume functions
  Input: adxl34x - add CONFIG_PM_SLEEP to suspend/resume functions
  ...

11 years agoaf_unix: fix a fatal race with bit fields
Eric Dumazet [Wed, 1 May 2013 05:24:03 +0000 (05:24 +0000)]
af_unix: fix a fatal race with bit fields

Using bit fields is dangerous on ppc64/sparc64, as the compiler [1]
uses 64bit instructions to manipulate them.
If the 64bit word includes any atomic_t or spinlock_t, we can lose
critical concurrent changes.

This is happening in af_unix, where unix_sk(sk)->gc_candidate/
gc_maybe_cycle/lock share the same 64bit word.

This leads to fatal deadlock, as one/several cpus spin forever
on a spinlock that will never be available again.

A safer way would be to use a long to store flags.
This way we are sure compiler/arch wont do bad things.

As we own unix_gc_lock spinlock when clearing or setting bits,
we can use the non atomic __set_bit()/__clear_bit().

recursion_level can share the same 64bit location with the spinlock,
as it is set only with this spinlock held.

[1] bug fixed in gcc-4.8.0 :
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=52080

Reported-by: Ambrose Feinstein <ambrose@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'bnx2x'
David S. Miller [Wed, 1 May 2013 19:07:50 +0000 (15:07 -0400)]
Merge branch 'bnx2x'

Yuval Mintz says:

====================
This fixes 2 small bugs - one which may cause an unnecessary link flap,
and the other is a small memory leak when unloading while cnic is not
loaded.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: Prevent memory leak when cnic is absent
Yuval Mintz [Wed, 1 May 2013 04:27:58 +0000 (04:27 +0000)]
bnx2x: Prevent memory leak when cnic is absent

bnx2x driver allocates searcher T2 tables, but it releases that memory
during unload only released if the cnic is loaded.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agobnx2x: correct reading of speed capabilities
Yaniv Rosner [Wed, 1 May 2013 04:27:57 +0000 (04:27 +0000)]
bnx2x: correct reading of speed capabilities

When the bnx2x driver reads the port configuration - mask irrelevant bits.

Without this change, the unintended bits may cause the driver to needlessly
toggle the link, as a comparison in the link flap avoidance flow will show
that the old link did not advertise the same capabilities and thus cannot
be retained.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonet: sctp: attribute printl with __printf for gcc fmt checks
Daniel Borkmann [Wed, 1 May 2013 02:59:23 +0000 (02:59 +0000)]
net: sctp: attribute printl with __printf for gcc fmt checks

Let GCC check for format string errors in sctp's probe printl
function. This patch fixes the warning when compiled with W=1:

net/sctp/probe.c:73:2: warning: function might be possible candidate
for 'gnu_printf' format attribute [-Wmissing-format-attribute]

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonetlink: kconfig: move mmap i/o into netlink kconfig
Daniel Borkmann [Wed, 1 May 2013 01:37:20 +0000 (01:37 +0000)]
netlink: kconfig: move mmap i/o into netlink kconfig

Currently, in menuconfig, Netlink's new mmaped IO is the very first
entry under the ``Networking support'' item and comes even before
``Networking options'':

  [ ]   Netlink: mmaped IO
  Networking options  --->
  ...

Lets move this into ``Networking options'' under netlink's Kconfig,
since this might be more appropriate. Introduced by commit ccdfcc398
(``netlink: mmaped netlink: ring setup'').

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonetpoll: convert mutex into a semaphore
Neil Horman [Tue, 30 Apr 2013 05:35:05 +0000 (05:35 +0000)]
netpoll: convert mutex into a semaphore

Bart Van Assche recently reported a warning to me:

<IRQ>  [<ffffffff8103d79f>] warn_slowpath_common+0x7f/0xc0
[<ffffffff8103d7fa>] warn_slowpath_null+0x1a/0x20
[<ffffffff814761dd>] mutex_trylock+0x16d/0x180
[<ffffffff813968c9>] netpoll_poll_dev+0x49/0xc30
[<ffffffff8136a2d2>] ? __alloc_skb+0x82/0x2a0
[<ffffffff81397715>] netpoll_send_skb_on_dev+0x265/0x410
[<ffffffff81397c5a>] netpoll_send_udp+0x28a/0x3a0
[<ffffffffa0541843>] ? write_msg+0x53/0x110 [netconsole]
[<ffffffffa05418bf>] write_msg+0xcf/0x110 [netconsole]
[<ffffffff8103eba1>] call_console_drivers.constprop.17+0xa1/0x1c0
[<ffffffff8103fb76>] console_unlock+0x2d6/0x450
[<ffffffff8104011e>] vprintk_emit+0x1ee/0x510
[<ffffffff8146f9f6>] printk+0x4d/0x4f
[<ffffffffa0004f1d>] scsi_print_command+0x7d/0xe0 [scsi_mod]

This resulted from my commit ca99ca14c which introduced a mutex_trylock
operation in a path that could execute in interrupt context.  When mutex
debugging is enabled, the above warns the user when we are in fact
exectuting in interrupt context
interrupt context.

After some discussion, It seems that a semaphore is the proper mechanism to use
here.  While mutexes are defined to be unusable in interrupt context, no such
condition exists for semaphores (save for the fact that the non blocking api
calls, like up and down_trylock must be used when in irq context).

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Bart Van Assche <bvanassche@acm.org>
CC: Bart Van Assche <bvanassche@acm.org>
CC: David Miller <davem@davemloft.net>
CC: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agonetlink: Fix skb ref counting.
Pravin B Shelar [Mon, 29 Apr 2013 20:52:01 +0000 (20:52 +0000)]
netlink: Fix skb ref counting.

Commit f9c2288837ba072b21dba955f04a4c97eaa77b1e (netlink:
implement memory mapped recvmsg) increamented skb->users
ref count twice for a dump op which does not look right.

Following patch fixes that.

CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Linus Torvalds [Wed, 1 May 2013 17:48:34 +0000 (10:48 -0700)]
Merge git://git./linux/kernel/git/cmetcalf/linux-tile

Pull tile arch changes from Chris Metcalf:
 "These are some minor new feature work and other changes that didn't
  merit getting pushed up after the 3.9 merge window closed.

  There should be a lot more activity in the 3.11 merge window"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: Fix syscall return value passed to tracepoint
  tile: comment assumption about __insn_mtspr for <asm/irqflags.h>
  tile: ns2cycles should use __raw_get_cpu_var
  arch: remove KCORE_ELF again [tile]
  tile: remove two outdated Kconfig entries
  tile: support atomic64_dec_if_positive()
  tile: support TIF_SYSCALL_TRACEPOINT; select HAVE_SYSCALL_TRACEPOINTS
  tile: Add definition of NR_syscalls
  tile: move declaration of sys_call_table to <asm/syscall.h>
  arch/tile: Enable HAVE_ARCH_TRACEHOOK
  arch/tile: Call tracehook_report_syscall_{entry,exit} in syscall trace

11 years agoinit: Do not warn on non-zero initcall return
Steven Rostedt [Wed, 1 May 2013 17:35:51 +0000 (13:35 -0400)]
init: Do not warn on non-zero initcall return

Commit f91eb62f71b3 ("init: scream bloody murder if interrupts are
enabled too early") added three new warnings.  The first two seemed
reasonable, but the third included a warning when an initcall returned
non-zero.  Although, the third WARN() does include an imbalanced preempt
disabled, or irqs disable, it shouldn't warn if it only had an initcall
that just returns non-zero.

In fact, according to Linus, it shouldn't print at all.  As it only
prints with initcall_debug set, and that already shows enough
information to fix things.

Link: http://lkml.kernel.org/r/CA+55aFzaBC5SFi7=F2mfm+KWY5qTsBmOqgbbs8E+LUS8JK-sBg@mail.gmail.com
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonet_sched: act_ipt forward compat with xtables
Jamal Hadi Salim [Sun, 28 Apr 2013 05:06:38 +0000 (05:06 +0000)]
net_sched: act_ipt forward compat with xtables

Deal with changes in newer xtables while maintaining backward
compatibility. Thanks to Jan Engelhardt for suggestions.

Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
11 years agoMerge branch 'topic/omap3isp' of git://git.kernel.org/pub/scm/linux/kernel/git/mcheha...
Linus Torvalds [Wed, 1 May 2013 16:57:04 +0000 (09:57 -0700)]
Merge branch 'topic/omap3isp' of git://git./linux/kernel/git/mchehab/linux-media

Pull omap3isp clk support from Mauro Carvalho Chehab:
 "This patch were sent in separate as it depends on a merge from clock
  framework, that you merged in commit 362ed48dee50"

* 'topic/omap3isp' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] omap3isp: Use the common clock framework

11 years agoMerge branch 'next' into for-linus
Dmitry Torokhov [Wed, 1 May 2013 15:47:44 +0000 (08:47 -0700)]
Merge branch 'next' into for-linus

Prepare first set of updates for 3.10 merge window.

11 years agoMerge branch 'ipc-scalability'
Linus Torvalds [Wed, 1 May 2013 15:17:51 +0000 (08:17 -0700)]
Merge branch 'ipc-scalability'

Merge IPC cleanup and scalability patches from Andrew Morton.

This cleans up many of the oddities in the IPC code, uses the list
iterator helpers, splits out locking and adds per-semaphore locks for
greater scalability of the IPC semaphore code.

Most normal user-level locking by now uses futexes (ie pthreads, but
also a lot of specialized locks), but SysV IPC semaphores are apparently
still used in some big applications, either for portability reasons, or
because they offer tracking and undo (and you don't need to have a
special shared memory area for them).

Our IPC semaphore scalability was pitiful.  We used to lock much too big
ranges, and we used to have a single ipc lock per ipc semaphore array.
Most loads never cared, but some do.  There are some numbers in the
individual commits.

* ipc-scalability:
  ipc: sysv shared memory limited to 8TiB
  ipc/msg.c: use list_for_each_entry_[safe] for list traversing
  ipc,sem: fine grained locking for semtimedop
  ipc,sem: have only one list in struct sem_queue
  ipc,sem: open code and rename sem_lock
  ipc,sem: do not hold ipc lock more than necessary
  ipc: introduce lockless pre_down ipcctl
  ipc: introduce obtaining a lockless ipc object
  ipc: remove bogus lock comment for ipc_checkid
  ipc/msgutil.c: use linux/uaccess.h
  ipc: refactor msg list search into separate function
  ipc: simplify msg list search
  ipc: implement MSG_COPY as a new receive mode
  ipc: remove msg handling from queue scan
  ipc: set EFAULT as default error in load_msg()
  ipc: tighten msg copy loops
  ipc: separate msg allocation from userspace copy
  ipc: clamp with min()

11 years agoipc: sysv shared memory limited to 8TiB
Robin Holt [Wed, 1 May 2013 02:15:54 +0000 (19:15 -0700)]
ipc: sysv shared memory limited to 8TiB

Trying to run an application which was trying to put data into half of
memory using shmget(), we found that having a shmall value below 8EiB-8TiB
would prevent us from using anything more than 8TiB.  By setting
kernel.shmall greater than 8EiB-8TiB would make the job work.

In the newseg() function, ns->shm_tot which, at 8TiB is INT_MAX.

ipc/shm.c:
 458 static int newseg(struct ipc_namespace *ns, struct ipc_params *params)
 459 {
...
 465         int numpages = (size + PAGE_SIZE -1) >> PAGE_SHIFT;
...
 474         if (ns->shm_tot + numpages > ns->shm_ctlall)
 475                 return -ENOSPC;

[akpm@linux-foundation.org: make ipc/shm.c:newseg()'s numpages size_t, not int]
Signed-off-by: Robin Holt <holt@sgi.com>
Reported-by: Alex Thorlton <athorlton@sgi.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipc/msg.c: use list_for_each_entry_[safe] for list traversing
Nikola Pajkovsky [Wed, 1 May 2013 02:15:49 +0000 (19:15 -0700)]
ipc/msg.c: use list_for_each_entry_[safe] for list traversing

The ipc/msg.c code does its list operations by hand and it open-codes the
accesses, instead of using for_each_entry_[safe].

Signed-off-by: Nikola Pajkovsky <npajkovs@redhat.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipc,sem: fine grained locking for semtimedop
Rik van Riel [Wed, 1 May 2013 02:15:44 +0000 (19:15 -0700)]
ipc,sem: fine grained locking for semtimedop

Introduce finer grained locking for semtimedop, to handle the common case
of a program wanting to manipulate one semaphore from an array with
multiple semaphores.

If the call is a semop manipulating just one semaphore in an array with
multiple semaphores, only take the lock for that semaphore itself.

If the call needs to manipulate multiple semaphores, or another caller is
in a transaction that manipulates multiple semaphores, the sem_array lock
is taken, as well as all the locks for the individual semaphores.

On a 24 CPU system, performance numbers with the semop-multi
test with N threads and N semaphores, look like this:

vanilla Davidlohr's Davidlohr's + Davidlohr's +
threads patches rwlock patches v3 patches
10 610652 726325 1783589 2142206
20 341570 365699 1520453 1977878
30 288102 307037 1498167 2037995
40 290714 305955 1612665 2256484
50 288620 312890 1733453 2650292
60 289987 306043 1649360 2388008
70 291298 306347 1723167 2717486
80 290948 305662 1729545 2763582
90 290996 306680 1736021 2757524
100 292243 306700 1773700 3059159

[davidlohr.bueso@hp.com: do not call sem_lock when bogus sma]
[davidlohr.bueso@hp.com: make refcounter atomic]
Signed-off-by: Rik van Riel <riel@redhat.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Chegu Vinod <chegu_vinod@hp.com>
Cc: Jason Low <jason.low2@hp.com>
Reviewed-by: Michel Lespinasse <walken@google.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Tested-by: Emmanuel Benisty <benisty.e@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipc,sem: have only one list in struct sem_queue
Rik van Riel [Wed, 1 May 2013 02:15:39 +0000 (19:15 -0700)]
ipc,sem: have only one list in struct sem_queue

Having only one list in struct sem_queue, and only queueing simple
semaphore operations on the list for the semaphore involved, allows us to
introduce finer grained locking for semtimedop.

Signed-off-by: Rik van Riel <riel@redhat.com>
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Chegu Vinod <chegu_vinod@hp.com>
Cc: Emmanuel Benisty <benisty.e@gmail.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipc,sem: open code and rename sem_lock
Rik van Riel [Wed, 1 May 2013 02:15:35 +0000 (19:15 -0700)]
ipc,sem: open code and rename sem_lock

Rename sem_lock() to sem_obtain_lock(), so we can introduce a sem_lock()
later that only locks the sem_array and does nothing else.

Open code the locking from ipc_lock() in sem_obtain_lock() so we can
introduce finer grained locking for the sem_array in the next patch.

[akpm@linux-foundation.org: propagate the ipc_obtain_object() errno out of sem_obtain_lock()]
Signed-off-by: Rik van Riel <riel@redhat.com>
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Chegu Vinod <chegu_vinod@hp.com>
Cc: Emmanuel Benisty <benisty.e@gmail.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipc,sem: do not hold ipc lock more than necessary
Davidlohr Bueso [Wed, 1 May 2013 02:15:29 +0000 (19:15 -0700)]
ipc,sem: do not hold ipc lock more than necessary

Instead of holding the ipc lock for permissions and security checks, among
others, only acquire it when necessary.

Some numbers....

1) With Rik's semop-multi.c microbenchmark we can see the following
   results:

Baseline (3.9-rc1):
cpus 4, threads: 256, semaphores: 128, test duration: 30 secs
total operations: 151452270, ops/sec 5048409

+  59.40%            a.out  [kernel.kallsyms]  [k] _raw_spin_lock
+   6.14%            a.out  [kernel.kallsyms]  [k] sys_semtimedop
+   3.84%            a.out  [kernel.kallsyms]  [k] avc_has_perm_flags
+   3.64%            a.out  [kernel.kallsyms]  [k] __audit_syscall_exit
+   2.06%            a.out  [kernel.kallsyms]  [k] copy_user_enhanced_fast_string
+   1.86%            a.out  [kernel.kallsyms]  [k] ipc_lock

With this patchset:
cpus 4, threads: 256, semaphores: 128, test duration: 30 secs
total operations: 273156400, ops/sec 9105213

+  18.54%            a.out  [kernel.kallsyms]  [k] _raw_spin_lock
+  11.72%            a.out  [kernel.kallsyms]  [k] sys_semtimedop
+   7.70%            a.out  [kernel.kallsyms]  [k] ipc_has_perm.isra.21
+   6.58%            a.out  [kernel.kallsyms]  [k] avc_has_perm_flags
+   6.54%            a.out  [kernel.kallsyms]  [k] __audit_syscall_exit
+   4.71%            a.out  [kernel.kallsyms]  [k] ipc_obtain_object_check

2) While on an Oracle swingbench DSS (data mining) workload the
   improvements are not as exciting as with Rik's benchmark, we can see
   some positive numbers.  For an 8 socket machine the following are the
   percentages of %sys time incurred in the ipc lock:

Baseline (3.9-rc1):
100 swingbench users: 8,74%
400 swingbench users: 21,86%
800 swingbench users: 84,35%

With this patchset:
100 swingbench users: 8,11%
400 swingbench users: 19,93%
800 swingbench users: 77,69%

[riel@redhat.com: fix two locking bugs]
[sasha.levin@oracle.com: prevent releasing RCU read lock twice in semctl_main]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Acked-by: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Emmanuel Benisty <benisty.e@gmail.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipc: introduce lockless pre_down ipcctl
Davidlohr Bueso [Wed, 1 May 2013 02:15:24 +0000 (19:15 -0700)]
ipc: introduce lockless pre_down ipcctl

Various forms of ipc use ipcctl_pre_down() to retrieve an ipc object and
check permissions, mostly for IPC_RMID and IPC_SET commands.

Introduce ipcctl_pre_down_nolock(), a lockless version of this function.
The locking version is retained, yet modified to call the nolock version
without affecting its semantics, thus transparent to all ipc callers.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Chegu Vinod <chegu_vinod@hp.com>
Cc: Emmanuel Benisty <benisty.e@gmail.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipc: introduce obtaining a lockless ipc object
Davidlohr Bueso [Wed, 1 May 2013 02:15:19 +0000 (19:15 -0700)]
ipc: introduce obtaining a lockless ipc object

Through ipc_lock() and therefore ipc_lock_check() we currently return the
locked ipc object.  This is not necessary for all situations and can,
therefore, cause unnecessary ipc lock contention.

Introduce analogous ipc_obtain_object() and ipc_obtain_object_check()
functions that only lookup and return the ipc object.

Both these functions must be called within the RCU read critical section.

[akpm@linux-foundation.org: propagate the ipc_obtain_object() errno from ipc_lock()]
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Acked-by: Michel Lespinasse <walken@google.com>
Cc: Emmanuel Benisty <benisty.e@gmail.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipc: remove bogus lock comment for ipc_checkid
Davidlohr Bueso [Wed, 1 May 2013 02:15:14 +0000 (19:15 -0700)]
ipc: remove bogus lock comment for ipc_checkid

This series makes the sysv semaphore code more scalable, by reducing the
time the semaphore lock is held, and making the locking more scalable for
semaphore arrays with multiple semaphores.

The first four patches were written by Davidlohr Buesso, and reduce the
hold time of the semaphore lock.

The last three patches change the sysv semaphore code locking to be more
fine grained, providing a performance boost when multiple semaphores in a
semaphore array are being manipulated simultaneously.

On a 24 CPU system, performance numbers with the semop-multi
test with N threads and N semaphores, look like this:

vanilla Davidlohr's Davidlohr's + Davidlohr's +
threads patches rwlock patches v3 patches
10 610652 726325 1783589 2142206
20 341570 365699 1520453 1977878
30 288102 307037 1498167 2037995
40 290714 305955 1612665 2256484
50 288620 312890 1733453 2650292
60 289987 306043 1649360 2388008
70 291298 306347 1723167 2717486
80 290948 305662 1729545 2763582
90 290996 306680 1736021 2757524
100 292243 306700 1773700 3059159

This patch:

There is no reason to be holding the ipc lock while reading ipcp->seq,
hence remove misleading comment.

Also simplify the return value for the function.

Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Chegu Vinod <chegu_vinod@hp.com>
Cc: Emmanuel Benisty <benisty.e@gmail.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Stanislav Kinsbursky <skinsbursky@parallels.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipc/msgutil.c: use linux/uaccess.h
HoSung Jung [Wed, 1 May 2013 02:15:09 +0000 (19:15 -0700)]
ipc/msgutil.c: use linux/uaccess.h

Signed-off-by: HoSung Jung <rain6557@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipc: refactor msg list search into separate function
Peter Hurley [Wed, 1 May 2013 02:15:04 +0000 (19:15 -0700)]
ipc: refactor msg list search into separate function

[fengguang.wu@intel.com: find_msg can be static]
Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipc: simplify msg list search
Peter Hurley [Wed, 1 May 2013 02:14:59 +0000 (19:14 -0700)]
ipc: simplify msg list search

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipc: implement MSG_COPY as a new receive mode
Peter Hurley [Wed, 1 May 2013 02:14:54 +0000 (19:14 -0700)]
ipc: implement MSG_COPY as a new receive mode

Teach the helper routines about MSG_COPY so that msgtyp is preserved as
the message number to copy.

The security functions affected by this change were audited and no
additional changes are necessary.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipc: remove msg handling from queue scan
Peter Hurley [Wed, 1 May 2013 02:14:48 +0000 (19:14 -0700)]
ipc: remove msg handling from queue scan

In preparation for refactoring the queue scan into a separate
function, relocate msg copying.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipc: set EFAULT as default error in load_msg()
Peter Hurley [Wed, 1 May 2013 02:14:42 +0000 (19:14 -0700)]
ipc: set EFAULT as default error in load_msg()

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipc: tighten msg copy loops
Peter Hurley [Wed, 1 May 2013 02:14:37 +0000 (19:14 -0700)]
ipc: tighten msg copy loops

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipc: separate msg allocation from userspace copy
Peter Hurley [Wed, 1 May 2013 02:14:31 +0000 (19:14 -0700)]
ipc: separate msg allocation from userspace copy

Separating msg allocation enables single-block vmalloc
allocation instead.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoipc: clamp with min()
Peter Hurley [Wed, 1 May 2013 02:14:25 +0000 (19:14 -0700)]
ipc: clamp with min()

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso...
Linus Torvalds [Wed, 1 May 2013 15:04:12 +0000 (08:04 -0700)]
Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
 "Mostly performance and bug fixes, plus some cleanups.  The one new
  feature this merge window is a new ioctl EXT4_IOC_SWAP_BOOT which
  allows installation of a hidden inode designed for boot loaders."

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (50 commits)
  ext4: fix type-widening bug in inode table readahead code
  ext4: add check for inodes_count overflow in new resize ioctl
  ext4: fix Kconfig documentation for CONFIG_EXT4_DEBUG
  ext4: fix online resizing for ext3-compat file systems
  jbd2: trace when lock_buffer in do_get_write_access takes a long time
  ext4: mark metadata blocks using bh flags
  buffer: add BH_Prio and BH_Meta flags
  ext4: mark all metadata I/O with REQ_META
  ext4: fix readdir error in case inline_data+^dir_index.
  ext4: fix readdir error in the case of inline_data+dir_index
  jbd2: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
  ext4: mext_insert_extents should update extent block checksum
  ext4: move quota initialization out of inode allocation transaction
  ext4: reserve xattr index for Rich ACL support
  jbd2: reduce journal_head size
  ext4: clear buffer_uninit flag when submitting IO
  ext4: use io_end for multiple bios
  ext4: make ext4_bio_write_page() use BH_Async_Write flags
  ext4: Use kstrtoul() instead of parse_strtoul()
  ext4: defragmentation code cleanup
  ...

11 years agoMerge tag 'tag-for-linus-3.10' of git://git.linaro.org/people/sumitsemwal/linux-dma-buf
Linus Torvalds [Wed, 1 May 2013 14:44:37 +0000 (07:44 -0700)]
Merge tag 'tag-for-linus-3.10' of git://git.linaro.org/people/sumitsemwal/linux-dma-buf

Pull dma-buf updates from Sumit Semwal:
 "Added debugfs support to dma-buf"

* tag 'tag-for-linus-3.10' of git://git.linaro.org/people/sumitsemwal/linux-dma-buf:
  dma-buf: Add debugfs support
  dma-buf: replace dma_buf_export() with dma_buf_export_named()

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux...
Linus Torvalds [Wed, 1 May 2013 14:43:05 +0000 (07:43 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/rkuo/linux-hexagon-kernel

Pull Hexagon fixes from Richard Kuo:
 "Changes for the Hexagon architecture (and one touching OpenRISC).

  They include various fixes to make use of additional arch features and
  cleanups.  The largest functional change is a cleanup of the signal
  and event return paths"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel: (32 commits)
  Hexagon: add v4 CS regs to core copyout macro
  Hexagon: use correct translation for VMALLOC_START
  Hexagon: use correct translations for DMA mappings
  Hexagon: fix return value for notify_resume case in do_work_pending
  Hexagon: fix signal number for user mem faults
  Hexagon: remove two Kconfig entries
  arch: remove CONFIG_GENERIC_FIND_NEXT_BIT again
  Hexagon: update copyright dates
  Hexagon: add translation types for __vmnewmap
  Hexagon: fix signal.c compile error
  Hexagon: break up user fn/arg register setting
  Hexagon: use generic sys_fork, sys_vfork, and sys_clone
  Hexagon: fix psp/sp macro
  Hexagon: fix up int enable/disable at ret_from_fork
  Hexagon: add IOMEM and _relaxed IO macros
  Hexagon: switch to using the device type for IO mappings
  Hexagon: don't print info for offline CPU's
  Hexagon: add support for single-stepping (v4+)
  Hexagon: use correct work mask when checking for more work
  Hexagon: add support for additional exceptions
  ...

11 years agotty: fix up atime/mtime mess, take three
Linus Torvalds [Wed, 1 May 2013 14:32:21 +0000 (07:32 -0700)]
tty: fix up atime/mtime mess, take three

We first tried to avoid updating atime/mtime entirely (commit
b0de59b5733d: "TTY: do not update atime/mtime on read/write"), and then
limited it to only update it occasionally (commit 37b7f3c76595: "TTY:
fix atime/mtime regression"), but it turns out that this was both
insufficient and overkill.

It was insufficient because we let people attach to the shared ptmx node
to see activity without even reading atime/mtime, and it was overkill
because the "only once a minute" means that you can't really tell an
idle person from an active one with 'w'.

So this tries to fix the problem properly.  It marks the shared ptmx
node as un-notifiable, and it lowers the "only once a minute" to a few
seconds instead - still long enough that you can't time individual
keystrokes, but short enough that you can tell whether somebody is
active or not.

Reported-by: Simon Kirby <sim@hostway.ca>
Acked-by: Jiri Slaby <jslaby@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Linus Torvalds [Wed, 1 May 2013 14:21:43 +0000 (07:21 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/signal

Pull compat cleanup from Al Viro:
 "Mostly about syscall wrappers this time; there will be another pile
  with patches in the same general area from various people, but I'd
  rather push those after both that and vfs.git pile are in."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  syscalls.h: slightly reduce the jungles of macros
  get rid of union semop in sys_semctl(2) arguments
  make do_mremap() static
  sparc: no need to sign-extend in sync_file_range() wrapper
  ppc compat wrappers for add_key(2) and request_key(2) are pointless
  x86: trim sys_ia32.h
  x86: sys32_kill and sys32_mprotect are pointless
  get rid of compat_sys_semctl() and friends in case of ARCH_WANT_OLD_COMPAT_IPC
  merge compat sys_ipc instances
  consolidate compat lookup_dcookie()
  convert vmsplice to COMPAT_SYSCALL_DEFINE
  switch getrusage() to COMPAT_SYSCALL_DEFINE
  switch epoll_pwait to COMPAT_SYSCALL_DEFINE
  convert sendfile{,64} to COMPAT_SYSCALL_DEFINE
  switch signalfd{,4}() to COMPAT_SYSCALL_DEFINE
  make SYSCALL_DEFINE<n>-generated wrappers do asmlinkage_protect
  make HAVE_SYSCALL_WRAPPERS unconditional
  consolidate cond_syscall and SYSCALL_ALIAS declarations
  teach SYSCALL_DEFINE<n> how to deal with long long/unsigned long long
  get rid of duplicate logics in __SC_....[1-6] definitions

11 years agodma-buf: Add debugfs support
Sumit Semwal [Thu, 4 Apr 2013 06:14:37 +0000 (11:44 +0530)]
dma-buf: Add debugfs support

Add debugfs support to make it easier to print debug information
about the dma-buf buffers.

Cc: Dave Airlie <airlied@redhat.com>
 [minor fixes on init and warning fix]
Cc: Dan Carpenter <dan.carpenter@oracle.com>
 [remove double unlock in fail case]
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
11 years agodma-buf: replace dma_buf_export() with dma_buf_export_named()
Sumit Semwal [Fri, 22 Mar 2013 12:52:16 +0000 (18:22 +0530)]
dma-buf: replace dma_buf_export() with dma_buf_export_named()

For debugging purposes, it is useful to have a name-string added
while exporting buffers. Hence, dma_buf_export() is replaced with
dma_buf_export_named(), which additionally takes 'exp_name' as a
parameter.

For backward compatibility, and for lazy exporters who don't wish to
name themselves, a #define dma_buf_export() is also made available,
which adds a __FILE__ instead of 'exp_name'.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
  [Thanks for the idea!]
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
11 years agoHexagon: add v4 CS regs to core copyout macro
Richard Kuo [Tue, 9 Apr 2013 22:06:08 +0000 (17:06 -0500)]
Hexagon: add v4 CS regs to core copyout macro

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: use correct translation for VMALLOC_START
Richard Kuo [Tue, 9 Apr 2013 00:03:05 +0000 (19:03 -0500)]
Hexagon: use correct translation for VMALLOC_START

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: use correct translations for DMA mappings
Richard Kuo [Mon, 8 Apr 2013 23:30:12 +0000 (18:30 -0500)]
Hexagon: use correct translations for DMA mappings

With physical offsets, pa<->va translations aren't just based
on PAGE_OFFSET anymore.

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: fix return value for notify_resume case in do_work_pending
Richard Kuo [Mon, 8 Apr 2013 23:26:25 +0000 (18:26 -0500)]
Hexagon: fix return value for notify_resume case in do_work_pending

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: fix signal number for user mem faults
Richard Kuo [Mon, 8 Apr 2013 22:48:33 +0000 (17:48 -0500)]
Hexagon: fix signal number for user mem faults

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: remove two Kconfig entries
Paul Bolle [Thu, 21 Mar 2013 10:13:17 +0000 (11:13 +0100)]
Hexagon: remove two Kconfig entries

The Kconfig entries for HEXAGON_VM and HEXAGON_ANGEL_TRAPS were added,
together with the configuration and makefiles for the Hexagon
architecture, in v3.2. They have never been used. They can safely be
removed.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
[rkuo@codeaurora.org: adjust for line changes in Kconfig]
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoarch: remove CONFIG_GENERIC_FIND_NEXT_BIT again
Paul Bolle [Thu, 21 Mar 2013 13:34:58 +0000 (14:34 +0100)]
arch: remove CONFIG_GENERIC_FIND_NEXT_BIT again

CONFIG_GENERIC_FIND_NEXT_BIT was removed in v3.0, but reappeared in two
architectures. Remove it again.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Acked-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: update copyright dates
Richard Kuo [Fri, 29 Mar 2013 01:45:40 +0000 (20:45 -0500)]
Hexagon: update copyright dates

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: add translation types for __vmnewmap
Richard Kuo [Tue, 26 Mar 2013 02:57:36 +0000 (21:57 -0500)]
Hexagon: add translation types for __vmnewmap

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: fix signal.c compile error
Richard Kuo [Wed, 20 Feb 2013 01:25:48 +0000 (19:25 -0600)]
Hexagon: fix signal.c compile error

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: break up user fn/arg register setting
Richard Kuo [Tue, 23 Oct 2012 23:26:20 +0000 (18:26 -0500)]
Hexagon: break up user fn/arg register setting

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: use generic sys_fork, sys_vfork, and sys_clone
Richard Kuo [Wed, 20 Feb 2013 01:19:50 +0000 (19:19 -0600)]
Hexagon: use generic sys_fork, sys_vfork, and sys_clone

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: fix psp/sp macro
Richard Kuo [Thu, 25 Oct 2012 18:50:27 +0000 (13:50 -0500)]
Hexagon: fix psp/sp macro

Based on feedback from Al Viro; previous-stack-pointer and
user reg for same should always be kept consistent.

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: fix up int enable/disable at ret_from_fork
Richard Kuo [Tue, 23 Oct 2012 23:26:01 +0000 (18:26 -0500)]
Hexagon: fix up int enable/disable at ret_from_fork

Check return coming out of check_work_pending, and if copy_thread
passed us a function in r24, call it.  Based on feedback from Al
Viro.

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: add IOMEM and _relaxed IO macros
Richard Kuo [Fri, 1 Mar 2013 19:16:15 +0000 (13:16 -0600)]
Hexagon: add IOMEM and _relaxed IO macros

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: switch to using the device type for IO mappings
Richard Kuo [Tue, 5 Feb 2013 20:23:37 +0000 (14:23 -0600)]
Hexagon: switch to using the device type for IO mappings

Uncached on our architecture can still have side effects
such as canceled/replayed transactions; device type prevents
this.

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: don't print info for offline CPU's
Richard Kuo [Mon, 4 Feb 2013 20:17:15 +0000 (14:17 -0600)]
Hexagon: don't print info for offline CPU's

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: add support for single-stepping (v4+)
Richard Kuo [Thu, 7 Mar 2013 18:03:10 +0000 (12:03 -0600)]
Hexagon: add support for single-stepping (v4+)

Hardware single-step is only available on v4 and later
architectures.

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: use correct work mask when checking for more work
Richard Kuo [Thu, 6 Dec 2012 22:37:43 +0000 (16:37 -0600)]
Hexagon: use correct work mask when checking for more work

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: add support for additional exceptions
Richard Kuo [Mon, 29 Oct 2012 00:54:37 +0000 (19:54 -0500)]
Hexagon: add support for additional exceptions

Add multi-reg-write and unaligned-PC exceptions.

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: fix initial page table setup prior to jump to VA
Richard Kuo [Fri, 30 Nov 2012 20:53:56 +0000 (14:53 -0600)]
Hexagon: fix initial page table setup prior to jump to VA

Use the exact number of pages needed to be mapped pre-VA-jump,
then map 896MB afterwards, which the arch mem init will fix up.

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: remove keyring related call
Richard Kuo [Wed, 20 Jun 2012 21:06:26 +0000 (16:06 -0500)]
Hexagon: remove keyring related call

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: check to if we will overflow the signal stack
Richard Kuo [Tue, 29 May 2012 23:56:39 +0000 (18:56 -0500)]
Hexagon: check to if we will overflow the signal stack

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: Signal and return path fixes
Richard Kuo [Tue, 29 May 2012 22:23:14 +0000 (17:23 -0500)]
Hexagon: Signal and return path fixes

This fixes the return value of sigreturn and moves the work pending check
into a c routine for readability and fixes the loop for multiple pending
signals.  Based on feedback from Al Viro.

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: add support for new v4+ registers
Richard Kuo [Tue, 27 Mar 2012 22:38:09 +0000 (17:38 -0500)]
Hexagon: add support for new v4+ registers

Add support for a couple new v4+ registers, along with
newer save/restore pt_regs.

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: add individual register access for switch_stack
Richard Kuo [Thu, 10 May 2012 22:40:14 +0000 (17:40 -0500)]
Hexagon: add individual register access for switch_stack

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: use defines for MIN_KERNEL_SEG calculation
Richard Kuo [Wed, 9 May 2012 00:06:03 +0000 (19:06 -0500)]
Hexagon: use defines for MIN_KERNEL_SEG calculation

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: use GENERIC_CPU_DEVICES
Richard Kuo [Tue, 3 Apr 2012 23:15:42 +0000 (18:15 -0500)]
Hexagon: use GENERIC_CPU_DEVICES

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: change arch version config to allow comparisons
Richard Kuo [Tue, 27 Mar 2012 22:37:33 +0000 (17:37 -0500)]
Hexagon: change arch version config to allow comparisons

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: add support for ARCH_PFN_OFFSET
Richard Kuo [Fri, 22 Mar 2013 21:05:40 +0000 (16:05 -0500)]
Hexagon: add support for ARCH_PFN_OFFSET

Add support for loading the kernel at a physical offset.  The
offset should still be 4M aligned.

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: fix __atomic_add_unless
Richard Kuo [Thu, 21 Mar 2013 23:24:19 +0000 (18:24 -0500)]
Hexagon: fix __atomic_add_unless

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoHexagon: clean up generic headers in Kbuild
Richard Kuo [Thu, 21 Mar 2013 20:17:56 +0000 (15:17 -0500)]
Hexagon: clean up generic headers in Kbuild

Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
11 years agoMerge branch 'akpm' (incoming from Andrew)
Linus Torvalds [Wed, 1 May 2013 00:37:43 +0000 (17:37 -0700)]
Merge branch 'akpm' (incoming from Andrew)

Merge third batch of fixes from Andrew Morton:
 "Most of the rest.  I still have two large patchsets against AIO and
  IPC, but they're a bit stuck behind other trees and I'm about to
  vanish for six days.

   - random fixlets
   - inotify
   - more of the MM queue
   - show_stack() cleanups
   - DMI update
   - kthread/workqueue things
   - compat cleanups
   - epoll udpates
   - binfmt updates
   - nilfs2
   - hfs
   - hfsplus
   - ptrace
   - kmod
   - coredump
   - kexec
   - rbtree
   - pids
   - pidns
   - pps
   - semaphore tweaks
   - some w1 patches
   - relay updates
   - core Kconfig changes
   - sysrq tweaks"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits)
  Documentation/sysrq: fix inconstistent help message of sysrq key
  ethernet/emac/sysrq: fix inconstistent help message of sysrq key
  sparc/sysrq: fix inconstistent help message of sysrq key
  powerpc/xmon/sysrq: fix inconstistent help message of sysrq key
  ARM/etm/sysrq: fix inconstistent help message of sysrq key
  power/sysrq: fix inconstistent help message of sysrq key
  kgdb/sysrq: fix inconstistent help message of sysrq key
  lib/decompress.c: fix initconst
  notifier-error-inject: fix module names in Kconfig
  kernel/sys.c: make prctl(PR_SET_MM) generally available
  UAPI: remove empty Kbuild files
  menuconfig: print more info for symbol without prompts
  init/Kconfig: re-order CONFIG_EXPERT options to fix menuconfig display
  kconfig menu: move Virtualization drivers near other virtualization options
  Kconfig: consolidate CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
  relay: use macro PAGE_ALIGN instead of FIX_SIZE
  kernel/relay.c: move FIX_SIZE macro into relay.c
  kernel/relay.c: remove unused function argument actor
  drivers/w1/slaves/w1_ds2760.c: fix the error handling in w1_ds2760_add_slave()
  drivers/w1/slaves/w1_ds2781.c: fix the error handling in w1_ds2781_add_slave()
  ...

11 years agoMerge tag 'md-3.10' of git://neil.brown.name/md
Linus Torvalds [Wed, 1 May 2013 00:16:17 +0000 (17:16 -0700)]
Merge tag 'md-3.10' of git://neil.brown.name/md

Pull md fixes from NeilBrown:
 "A mixed bag of little fixes.  No real new functionality here.  Several
  patches are tagged for -stable."

* tag 'md-3.10' of git://neil.brown.name/md:
  MD: ignore discard request for hard disks of hybid raid1/raid10 array
  md: bad block list should default to disabled.
  md: raid1/raid10 md devices leak memory when stopping
  DM RAID: Add message/status support for changing sync action
  MD: Export 'md_reap_sync_thread' function
  md: don't update metadata when stopping a read-only array.
  md: Allow devices to be re-added to a read-only array.
  md/raid10: Allow skipping recovery when clean arrays are assembled
  MD: Fix typos in MD documentation
  md/raid5: avoid an extra write when writing to a known-bad-block.
  md/raid5: Change or of some order to improve efficiency.
  md: use set_bit_le and clear_bit_le
  md: HOT_DISK_REMOVE shouldn't make a read-auto device active.
  md: use common code for all calls to ->hot_remove_disk()
  md: never update metadata when array is read-only.

11 years agoDocumentation/sysrq: fix inconstistent help message of sysrq key
zhangwei(Jovi) [Tue, 30 Apr 2013 22:28:57 +0000 (15:28 -0700)]
Documentation/sysrq: fix inconstistent help message of sysrq key

Currently help message of /proc/sysrq-trigger highlight its
upper-case characters, like below:

      SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E)
      memory-full-oom-kill(F) kill-all-tasks(I) ...

this would confuse user trigger sysrq by upper-case character, which is
inconsistent with the real lower-case character registed key.

This inconsistent help message will also lead more confused when
26 upper-case letters put into use in future.

This patch fix sysrq documentation.

Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoethernet/emac/sysrq: fix inconstistent help message of sysrq key
zhangwei(Jovi) [Tue, 30 Apr 2013 22:28:56 +0000 (15:28 -0700)]
ethernet/emac/sysrq: fix inconstistent help message of sysrq key

Currently help message of /proc/sysrq-trigger highlight its upper-case
characters, like below:

      SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E)
      memory-full-oom-kill(F) kill-all-tasks(I) ...

this would confuse user trigger sysrq by upper-case character, which is
inconsistent with the real lower-case character registed key.

This inconsistent help message will also lead more confused when
26 upper-case letters put into use in future.

This patch ethernet emac sysrq key: "emac(c)"

Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Cc: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agosparc/sysrq: fix inconstistent help message of sysrq key
zhangwei(Jovi) [Tue, 30 Apr 2013 22:28:55 +0000 (15:28 -0700)]
sparc/sysrq: fix inconstistent help message of sysrq key

Currently help message of /proc/sysrq-trigger highlight its
upper-case characters, like below:

      SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E)
      memory-full-oom-kill(F) kill-all-tasks(I) ...

this would confuse user trigger sysrq by upper-case character, which is
inconsistent with the real lower-case character registed key.

This inconsistent help message will also lead more confused when
26 upper-case letters put into use in future.

This patch fix spare sysrq key: "global-regs(y)"

Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopowerpc/xmon/sysrq: fix inconstistent help message of sysrq key
zhangwei(Jovi) [Tue, 30 Apr 2013 22:28:54 +0000 (15:28 -0700)]
powerpc/xmon/sysrq: fix inconstistent help message of sysrq key

Currently help message of /proc/sysrq-trigger highlight its
upper-case characters, like below:

      SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E)
      memory-full-oom-kill(F) kill-all-tasks(I) ...

this would confuse user trigger sysrq by upper-case character, which is
inconsistent with the real lower-case character registed key.

This inconsistent help message will also lead more confused when
26 upper-case letters put into use in future.

This patch fix powerpc xmon sysrq key: "xmon(x)"

Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoARM/etm/sysrq: fix inconstistent help message of sysrq key
zhangwei(Jovi) [Tue, 30 Apr 2013 22:28:53 +0000 (15:28 -0700)]
ARM/etm/sysrq: fix inconstistent help message of sysrq key

Currently help message of /proc/sysrq-trigger highlights its
upper-case characters, like below:

      SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E)
      memory-full-oom-kill(F) kill-all-tasks(I) ...

this would confuse user trigger sysrq by upper-case character, which is
inconsistent with the real lower-case character registed key.

This inconsistent help message will also lead more confused when
26 upper-case letters put into use in future.

This patch fix arm etm sysrq key: "etm-buffer-dump(v)"
(This patch also add "-" to separate each sysrq key help word,
instead of spaces)

Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agopower/sysrq: fix inconstistent help message of sysrq key
zhangwei(Jovi) [Tue, 30 Apr 2013 22:28:52 +0000 (15:28 -0700)]
power/sysrq: fix inconstistent help message of sysrq key

Currently help message of /proc/sysrq-trigger highlight its
upper-case characters, like below:

      SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E)
      memory-full-oom-kill(F) kill-all-tasks(I) ...

this would confuse user trigger sysrq by upper-case character, which is
inconsistent with the real lower-case character registed key.

This inconsistent help message will also lead more confused when
26 upper-case letters put into use in future.

This patch fix power off sysrq key: "poweroff(o)"

Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokgdb/sysrq: fix inconstistent help message of sysrq key
zhangwei(Jovi) [Tue, 30 Apr 2013 22:28:51 +0000 (15:28 -0700)]
kgdb/sysrq: fix inconstistent help message of sysrq key

Currently help message of /proc/sysrq-trigger highlight its upper-case
characters, like below:

      SysRq : HELP : loglevel(0-9) reBoot Crash terminate-all-tasks(E)
      memory-full-oom-kill(F) kill-all-tasks(I) ...

this would confuse user trigger sysrq by upper-case character, which is
inconsistent with the real lower-case character registed key.

This inconsistent help message will also lead more confused when
26 upper-case letters put into use in future.

This patch fix kgdb sysrq key: "debug(g)"

Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agolib/decompress.c: fix initconst
Andi Kleen [Tue, 30 Apr 2013 22:28:50 +0000 (15:28 -0700)]
lib/decompress.c: fix initconst

Signed-off-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agonotifier-error-inject: fix module names in Kconfig
Akinobu Mita [Tue, 30 Apr 2013 22:28:49 +0000 (15:28 -0700)]
notifier-error-inject: fix module names in Kconfig

The Kconfig help text for MEMORY_NOTIFIER_ERROR_INJECT and
OF_RECONFIG_NOTIFIER_ERROR_INJECT has mismatched module names.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokernel/sys.c: make prctl(PR_SET_MM) generally available
Amnon Shiloh [Tue, 30 Apr 2013 22:28:48 +0000 (15:28 -0700)]
kernel/sys.c: make prctl(PR_SET_MM) generally available

The purpose of this patch is to allow privileged processes to set
their own per-memory memory-region fields:

      start_code, end_code, start_data, end_data, start_brk, brk,
      start_stack, arg_start, arg_end, env_start, env_end.

This functionality is needed by any application or package that needs to
reconstruct Linux processes, that is, to start them in any way other than
by means of an "execve()" from an executable file.  This includes:

1. Restoring processes from a checkpoint-file (by all potential
   user-level checkpointing packages, not only CRIU's).
2. Restarting processes on another node after process migration.
3. Starting duplicated copies of a running process (for reliability
   and high-availablity).
4. Starting a process from an executable format that is not supported
   by Linux, thus requiring a "manual execve" by a user-level utility.
5. Similarly, starting a process from a networked and/or crypted
   executable that, for confidentiality, licensing or other reasons,
   may not be written to the local file-systems.

The code that does that was already included in the Linux kernel by the
CRIU group, in the form of "prctl(PR_SET_MM)", but prior to this was
enclosed within their private "#ifdef CONFIG_CHECKPOINT_RESTORE", which is
normally disabled.  The patch removes those ifdefs.

Signed-off-by: Amnon Shiloh <u3557@miso.sublimeip.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoUAPI: remove empty Kbuild files
David Howells [Tue, 30 Apr 2013 22:28:47 +0000 (15:28 -0700)]
UAPI: remove empty Kbuild files

Remove empty Kbuild files as they cause problems with the patch program which
removes files that become empty.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agomenuconfig: print more info for symbol without prompts
Wengmeiling [Tue, 30 Apr 2013 22:28:46 +0000 (15:28 -0700)]
menuconfig: print more info for symbol without prompts

When we search a config symbol, if it has no prompt the position of this
symbol in the Kconfig file and it's dependencies are not printed.  This
can be inconvenient, especially when it's set to n and we want to find out
why.

the following is an example:

before:

Symbol: GENERIC_SMP_IDLE_THREAD [=y]
Type  : boolean
  Selected by: X86 [=y]

after:

Symbol: GENERIC_SMP_IDLE_THREAD [=y]
Type  : boolean
  Defined at arch/Kconfig:213
  Selected by: X86 [=y]

Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Libo Chen <libo.chen@huawei.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoinit/Kconfig: re-order CONFIG_EXPERT options to fix menuconfig display
Mike Frysinger [Tue, 30 Apr 2013 22:28:45 +0000 (15:28 -0700)]
init/Kconfig: re-order CONFIG_EXPERT options to fix menuconfig display

The kconfig language requires that dependent options all follow the
menuconfig symbol in order to be collapsed below it.  Recently some hidden
options were added below the EXPERT menuconfig, but did not depend on
EXPERT (because hidden options can't).  This broke the display.  So
re-order all these options, and while we're here stick the PCI quirks
under the EXPERT menu (since it isn't sitting with any related options).

Before this commit, we get:
[*] Configure standard kernel features (expert users)  --->
[ ] Sysctl syscall support
[*] Load all symbols for debugging/ksymoops
...
[ ] Embedded system

Now we get the older (and correct) behavior:
[*] Configure standard kernel features (expert users)  --->
[ ] Embedded system
And if you go into the expert menu you get the expert options:
[ ] Sysctl syscall support
[*] Load all symbols for debugging/ksymoops
...

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Cc: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokconfig menu: move Virtualization drivers near other virtualization options
Randy Dunlap [Tue, 30 Apr 2013 22:28:44 +0000 (15:28 -0700)]
kconfig menu: move Virtualization drivers near other virtualization options

Make virtualization drivers be logically grouped together (physically
near each other) in the kconfig menu by moving "Virtualization drivers"
to be near "Virtio drivers", Microsort Hyper-V, and Xen driver support.

This is just a user-friendly, visual search change.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Stuart Yoder <stuart.yoder@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agoKconfig: consolidate CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
Stephen Boyd [Tue, 30 Apr 2013 22:28:42 +0000 (15:28 -0700)]
Kconfig: consolidate CONFIG_DEBUG_STRICT_USER_COPY_CHECKS

The help text for this config is duplicated across the x86, parisc, and
s390 Kconfig.debug files.  Arnd Bergman noted that the help text was
slightly misleading and should be fixed to state that enabling this
option isn't a problem when using pre 4.4 gcc.

To simplify the rewording, consolidate the text into lib/Kconfig.debug
and modify it there to be more explicit about when you should say N to
this config.

Also, make the text a bit more generic by stating that this option
enables compile time checks so we can cover architectures which emit
warnings vs.  ones which emit errors.  The details of how an
architecture decided to implement the checks isn't as important as the
concept of compile time checking of copy_from_user() calls.

While we're doing this, remove all the copy_from_user_overflow() code
that's duplicated many times and place it into lib/ so that any
architecture supporting this option can get the function for free.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Helge Deller <deller@gmx.de>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agorelay: use macro PAGE_ALIGN instead of FIX_SIZE
zhangwei(Jovi) [Tue, 30 Apr 2013 22:28:41 +0000 (15:28 -0700)]
relay: use macro PAGE_ALIGN instead of FIX_SIZE

Macro FIX_SIZE is same as PAGE_ALIGN at present, so use PAGE_ALIGN
instead.

Thanks Andrew found this.

Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokernel/relay.c: move FIX_SIZE macro into relay.c
zhangwei(Jovi) [Tue, 30 Apr 2013 22:28:40 +0000 (15:28 -0700)]
kernel/relay.c: move FIX_SIZE macro into relay.c

It's better to place FIX_SIZE macro in relay.c, instead of relay.h

Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agokernel/relay.c: remove unused function argument actor
zhangwei(Jovi) [Tue, 30 Apr 2013 22:28:39 +0000 (15:28 -0700)]
kernel/relay.c: remove unused function argument actor

Currently argument `actor' is never used in the relay reading path, so
remove it.

Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/w1/slaves/w1_ds2760.c: fix the error handling in w1_ds2760_add_slave()
Wei Yongjun [Tue, 30 Apr 2013 22:28:38 +0000 (15:28 -0700)]
drivers/w1/slaves/w1_ds2760.c: fix the error handling in w1_ds2760_add_slave()

Use platform_device_put() instead of platform_device_unregister() if
platform_device_add() fail, and platform_device_del() should be used in
the error handling case after platform_device_add() success.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Greg KH <greg@kroah.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/w1/slaves/w1_ds2781.c: fix the error handling in w1_ds2781_add_slave()
Wei Yongjun [Tue, 30 Apr 2013 22:28:37 +0000 (15:28 -0700)]
drivers/w1/slaves/w1_ds2781.c: fix the error handling in w1_ds2781_add_slave()

Use platform_device_put() instead of platform_device_unregister() if
platform_device_add() fail, and platform_device_del() should be used in
the error handling case after platform_device_add() success.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Greg KH <greg@kroah.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/w1/slaves/w1_ds2780.c: fix the error handling in w1_ds2780_add_slave()
Wei Yongjun [Tue, 30 Apr 2013 22:28:36 +0000 (15:28 -0700)]
drivers/w1/slaves/w1_ds2780.c: fix the error handling in w1_ds2780_add_slave()

Use platform_device_put() instead of platform_device_unregister() if
platform_device_add() fail, and platform_device_del() should be used in
the error handling case after platform_device_add() success.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Greg KH <greg@kroah.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/w1/slaves/w1_bq27000.c: fix the error handling in w1_bq27000_add_slave()
Wei Yongjun [Tue, 30 Apr 2013 22:28:35 +0000 (15:28 -0700)]
drivers/w1/slaves/w1_bq27000.c: fix the error handling in w1_bq27000_add_slave()

Use platform_device_put() instead of platform_device_unregister() if
platform_device_add() fails, and also add the return value check of
platform_device_add_data().

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Greg KH <greg@kroah.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
11 years agodrivers/memstick/host/r592.c: make r592_pm_ops static
Jingoo Han [Tue, 30 Apr 2013 22:28:34 +0000 (15:28 -0700)]
drivers/memstick/host/r592.c: make r592_pm_ops static

r592_pm_ops is not exported. Also, CONFIG_PM_SLEEP is used to
remove unnecessary ifdefs.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>