remoteproc: Check for NULL firmwares in sysfs interface

[ Upstream commit faeadbb64094757150a8c2a3175ca418dbdd472c ]

The remoteproc framework provides a sysfs file 'firmware'
for modifying the firmware image name from userspace. Add
an additional check to ensure NULL firmwares are errored
out right away, rather than getting a delayed error while
requesting a firmware during the start of a remoteproc
later on.

Tested-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: silead - try firmware reload after unsuccessful resume

[ Upstream commit dde27443211062e841806feaf690674b7c3a599f ]

A certain silead controller (Chip ID: 0x56810000) loses its firmware
after suspend, causing the resume to fail. This patch tries to load
the firmware, should a resume error occur and retries the resuming.

Signed-off-by: Julian Sax <jsbc@gmx.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: st1232 - set INPUT_PROP_DIRECT property

[ Upstream commit 20bbb312079494a406c10c90932e3c80837c9d94 ]

This is how userspace checks for touchscreen devices most reliably.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cec-gpio: select correct Signal Free Time

[ Upstream commit c439d5c1e13dbf66cff53455432f21d4d0536c51 ]

If a receive is in progress or starts before the transmit has
a chance, then lower the Signal Free Time of the upcoming transmit
to no more than CEC_SIGNAL_FREE_TIME_NEW_INITIATOR.

This is per the specification requirements.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ioat: fix prototype of ioat_enumerate_channels

[ Upstream commit f4d34aa8c887a8a2d23ef546da0efa10e3f77241 ]

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.x: fix lock recovery during delegation recall

[ Upstream commit 44f411c353bf6d98d5a34f8f1b8605d43b2e50b8 ]

Running "./nfstest_delegation --runtest recall26" uncovers that
client doesn't recover the lock when we have an appending open,
where the initial open got a write delegation.

Instead of checking for the passed in open context against
the file lock's open context. Check that the state is the same.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: brcmstb: Allow enabling the driver on DSL SoCs

[ Upstream commit e1eba2ea54a2de0e4c58d87270d25706bb77b844 ]

ARCH_BCM_63XX which is used by ARM-based DSL SoCs from Broadcom uses the
same controller, make it possible to select the STB driver and update
the Kconfig and help text a bit.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: samsung: Use clk_hw API for calling clk framework from clk notifiers

[ Upstream commit 1da220e3a5d22fccda0bc8542997abc1d1741268 ]

clk_notifier_register() documentation states, that the provided notifier
callbacks associated with the notifier must not re-enter into the clk
framework by calling any top-level clk APIs. Fix this by replacing
clk_get_rate() calls with clk_hw_get_rate(), which is safe in this
context.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: samsung: exynos5420: Define CLK_SECKEY gate clock only or Exynos5420

[ Upstream commit d32dd2a1a0f80edad158c9a1ba5f47650d9504a0 ]

The bit of GATE_BUS_PERIS1 for CLK_SECKEY is just reserved on
exynos5422/5800, not exynos5420. Define gate clk for exynos5420 to
handle the bit only on exynos5420.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[m.szyprow: rewrote commit subject]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qtnfmac: drop error reports for out-of-bounds key indexes

[ Upstream commit 35da3fe63b8647ce3cc52fccdf186a60710815fb ]

On disconnect wireless core attempts to remove all the supported keys.
Following cfg80211_ops conventions, firmware returns -ENOENT code
for the out-of-bound key indexes. This is a normal behavior,
so no need to report errors for this case.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qtnfmac: pass sgi rate info flag to wireless core

[ Upstream commit d5657b709e2a92a0e581109010765d1d485580df ]

SGI should be passed to wireless core as a part of rate structure.
Otherwise wireless core performs incorrect rate calculation when
SGI is enabled in hardware but not reported to host.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmfmac: fix full timeout waiting for action frame on-channel tx

[ Upstream commit fbf07000960d9c8a13fdc17c6de0230d681c7543 ]

The driver sends an action frame down and waits for a completion signal
triggered by the received BRCMF_E_ACTION_FRAME_OFF_CHAN_COMPLETE event
to continue the process. However, the action frame could be transmitted
either on the current channel or on an off channel. For the on-channel
case, only BRCMF_E_ACTION_FRAME_COMPLETE event will be received when
the frame is transmitted, which make the driver always wait a full
timeout duration. This patch has the completion signal be triggered by
receiving the BRCMF_E_ACTION_FRAME_COMPLETE event for the on-channel
case.

This change fixes WFA p2p certification 5.1.19 failure.

Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

brcmfmac: reduce timeout for action frame scan

[ Upstream commit edb6d6885bef82d1eac432dbeca9fbf4ec349d7e ]

Finding a common channel to send an action frame out is required for
some action types. Since a loop with several scan retry is used to find
the channel, a short wait time could be considered for each attempt.
This patch reduces the wait time from 1500 to 450 msec for each action
frame scan.

This patch fixes the WFA p2p certification 5.1.20 failure caused by the
long action frame send time.

Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpu/SMT: State SMT is disabled even with nosmt and without "=force"

[ Upstream commit d0e7d14455d41163126afecd0fcce935463cc512 ]

When booting with "nosmt=force" a message is issued into dmesg to
confirm that SMT has been force-disabled but such a message is not
issued when only "nosmt" is on the kernel command line.

Fix that.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20181004172227.10094-1-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: physmap_of: Release resources on error

[ Upstream commit ef0de747f7ad179c7698a5b0e28db05f18ecbf57 ]

During probe, if there was an error the memory region and the memory
map were not properly released.This can lead a system unusable if
deferred probe is in use.

Replace mem_request and map with devm_ioremap_resource

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: serial: cypress_m8: fix interrupt-out transfer length

[ Upstream commit 56445eef55cb5904096fed7a73cf87b755dfffc7 ]

Fix interrupt-out transfer length which was being set to the
transfer-buffer length rather than the size of the outgoing packet.

Note that no slab data was leaked as the whole transfer buffer is always
cleared before each transfer.

Fixes: 9aa8dae7b1fa ("cypress_m8: use usb_fill_int_urb where appropriate")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Book3S PR: Exiting split hack mode needs to fixup both PC and LR

[ Upstream commit 1006284c5e411872333967b1970c2ca46a9e225f ]

When an OS (currently only classic Mac OS) is running in KVM-PR and makes a
linked jump from code with split hack addressing enabled into code that does
not, LR is not correctly updated and reflects the previously munged PC.

To fix this, this patch undoes the address munge when exiting split
hack mode so that code relying on LR being a proper address will now
execute. This does not affect OS X or other operating systems running
on KVM-PR.

Signed-off-by: Cameron Kaiser <spectre@floodgap.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/sigmatel - Disable automute for Elo VuPoint

[ Upstream commit d153135e93a50cdb6f1b52e238909e9965b56056 ]

The Elo VuPoint 15MX has two headphone jacks of which neither work by
default. Disabling automute allows ALSA to work normally with the
speakers & left headphone jack.

Future pin configuration changes may be required in the future to get
the right headphone jack working in tandem.

Signed-off-by: Michael Pobega <mpobega@neverware.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: i2c: adv748x: Support probing a single output

[ Upstream commit eccf442ce156ec2b4e06b1239d5fdcb0c732f63f ]

Currently the adv748x driver will fail to probe unless both of its
output endpoints (TXA and TXB) are connected.

Make the driver support probing provided that there is at least one
input, and one output connected and protect the clean-up function from
accessing un-initialized fields.

Following patches will fix other uses of un-initialized TXs in the driver,
such as power management functions.

Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: pxa_camera: Fix check for pdev->dev.of_node

[ Upstream commit 44d7f1a77d8c84f8e42789b5475b74ae0e6d4758 ]

Clang warns that the address of a pointer will always evaluated as true
in a boolean context.

drivers/media/platform/pxa_camera.c:2400:17: warning: address of
'pdev->dev.of_node' will always evaluate to 'true'
[-Wpointer-bool-conversion]
        if (&pdev->dev.of_node && !pcdev->pdata) {
             ~~~~~~~~~~^~~~~~~ ~~
1 warning generated.

Judging from the rest of the kernel, it seems like this was an error and
just the value of of_node should be checked rather than the address.

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: rc: ir-rc6-decoder: enable toggle bit for Kathrein RCU-676 remote

[ Upstream commit 85e4af0a7ae2f146769b7475ae531bf8a3f3afb4 ]

The Kathrein RCU-676 remote uses the 32-bit rc6 protocol and toggles
bit 15 (0x8000) on repeated button presses, like MCE remotes.

Add it's customer code 0x80460000 to the 32-bit rc6 toggle
handling code to get proper scancodes and toggle reports.

Signed-off-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ata: ep93xx: Use proper enums for directions

[ Upstream commit 6adde4a36f1b6a562a1057fbb1065007851050e7 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/ata/pata_ep93xx.c:662:36: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
        drv_data->dma_rx_data.direction = DMA_FROM_DEVICE;
                                        ~ ^~~~~~~~~~~~~~~
drivers/ata/pata_ep93xx.c:670:36: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
        drv_data->dma_tx_data.direction = DMA_TO_DEVICE;
                                        ~ ^~~~~~~~~~~~~
drivers/ata/pata_ep93xx.c:681:19: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
        conf.direction = DMA_FROM_DEVICE;
                       ~ ^~~~~~~~~~~~~~~
drivers/ata/pata_ep93xx.c:692:19: warning: implicit conversion from
enumeration type 'enum dma_data_direction' to different enumeration type
'enum dma_transfer_direction' [-Wenum-conversion]
        conf.direction = DMA_TO_DEVICE;
                       ~ ^~~~~~~~~~~~~

Use the equivalent valued enums from the expected type so that Clang no
longer warns about a conversion.

DMA_TO_DEVICE = DMA_MEM_TO_DEV = 1
DMA_FROM_DEVICE = DMA_DEV_TO_MEM = 2

Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/time: Use clockevents_register_device(), fixing an issue with large decrementer

[ Upstream commit 8b78fdb045de60a4eb35460092bbd3cffa925353 ]

We currently cap the decrementer clockevent at 4 seconds, even on systems
with large decrementer support. Fix this by converting the code to use
clockevents_register_device() which calculates the upper bound based on
the max_delta passed in.

Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPICA: Never run _REG on system_memory and system_IO

[ Upstream commit 8b1cafdcb4b75c5027c52f1e82b47ebe727ad7ed ]

These address spaces are defined by the ACPI spec to be
"always available", and thus _REG should never be run on them.
Provides compatibility with other ACPI implementations.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Schmauss <erik.schmauss@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx4: Avoid implicit enumerated type conversion

[ Upstream commit b56511c15713ba6c7572e77a41f7ddba9c1053ec ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/infiniband/hw/mlx4/mad.c:1811:41: warning: implicit conversion
from enumeration type 'enum mlx4_ib_qp_flags' to different enumeration
type 'enum ib_qp_create_flags' [-Wenum-conversion]
                qp_init_attr.init_attr.create_flags = MLX4_IB_SRIOV_TUNNEL_QP;
                                                    ~ ^~~~~~~~~~~~~~~~~~~~~~~

drivers/infiniband/hw/mlx4/mad.c:1819:41: warning: implicit conversion
from enumeration type 'enum mlx4_ib_qp_flags' to different enumeration
type 'enum ib_qp_create_flags' [-Wenum-conversion]
                qp_init_attr.init_attr.create_flags = MLX4_IB_SRIOV_SQP;
                                                    ~ ^~~~~~~~~~~~~~~~~

The type mlx4_ib_qp_flags explicitly provides supplemental values to the
type ib_qp_create_flags. Make that clear to Clang by changing the
create_flags type to u32.

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mthca: Fix error return code in __mthca_init_one()

[ Upstream commit 39f2495618c5e980d2873ea3f2d1877dd253e07a ]

Fix to return a negative error code from the mthca_cmd_init() error
handling case instead of 0, as done elsewhere in this function.

Fixes: 80fd8238734c ("[PATCH] IB/mthca: Encapsulate command interface init")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: Fix crash with VFs and flow director on interface flap

[ Upstream commit 5d826d209164b0752c883607be4cdbbcf7cab494 ]

This patch fix crash when we have restore flow director filters after reset
adapter. In ixgbe_fdir_filter_restore() filter->action is outside of the
rx_ring array, as it has a VF identifier in the upper 32 bits.

Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Use proper enum in i40e_ndo_set_vf_link_state

[ Upstream commit 43ade6ad18416b8fd5bb3c9e9789faa666527eec ]

Clang warns when one enumerated type is converted implicitly to another.

drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4214:42: warning:
implicit conversion from enumeration type 'enum i40e_aq_link_speed' to
different enumeration type 'enum virtchnl_link_speed'
      [-Wenum-conversion]
                pfe.event_data.link_event.link_speed = I40E_LINK_SPEED_40GB;
                                                     ~ ^~~~~~~~~~~~~~~~~~~~
1 warning generated.

Use the proper enum from virtchnl_link_speed, which has the same value
as I40E_LINK_SPEED_40GB, VIRTCHNL_LINK_SPEED_40GB. This appears to be
missed by commit ff3f4cc267f6 ("virtchnl: finish conversion to virtchnl
interface").

Link: https://github.com/ClangBuiltLinux/linux/issues/81
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ixgbe: Fix ixgbe TX hangs with XDP_TX beyond queue limit

[ Upstream commit 8d7179b1e2d64b3493c0114916486fe92e6109a9 ]

We have Tx hang when number Tx and XDP queues are more than 64.
In XDP always is MTQC == 0x0 (64TxQs). We need more space for Tx queues.

Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: allow metadata updates while suspending an array - fix

[ Upstream commit 059421e041eb461fb2b3e81c9adaec18ef03ca3c ]

Commit 35bfc52187f6 ("md: allow metadata update while suspending.")
added support for allowing md_check_recovery() to still perform
metadata updates while the array is entering the 'suspended' state.
This is needed to allow the processes of entering the state to
complete.

Unfortunately, the patch doesn't really work.  The test for
"mddev->suspended" at the start of md_check_recovery() means that the
function doesn't try to do anything at all while entering suspend.

This patch moves the code of updating the metadata while suspending to
*before* the test on mddev->suspended.

Reported-by: Jeff Mahoney <jeffm@suse.com>
Fixes: 35bfc52187f6 ("md: allow metadata update while suspending.")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines

[ Upstream commit 37e7742c55ba856eaec7e35673ee370f36eb17f3 ]

The driver seems to abuse *unsigned long* not only for the (32-bit)
register values but also for the 'sh_cmt_channel::total_cycles' which
needs to always be 64-bit -- as a result, the clocksource's mask is
needlessly clamped down to 32-bits on the 32-bit machines...

Fixes: 19bdc9d061bc ("clocksource: sh_cmt clocksource support")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/sh_cmt: Fixup for 64-bit machines

[ Upstream commit 22627c6f3ed3d9d0df13eec3c831b08f8186c38e ]

When trying to use CMT for clockevents on R-Car gen3 SoCs, I noticed
that 'max_delta_ns' for the broadcast timer (CMT) was shown as 1000 in
/proc/timer_list. It turned out that when calculating it, the driver did
1 << 32 (causing what I think was undefined behavior) resulting in a zero
delta, later clamped to 1000 by cev_delta2ns(). The root cause turned out
to be that the driver abused *unsigned long* for the CMT register values
(which are 16/32-bit), so that the calculation of 'ch->max_match_value'
in sh_cmt_setup_channel() used the wrong branch. Using more proper 'u32'
instead fixed 'max_delta_ns' and even fixed the switching an active
clocksource to CMT (which caused the system to turn non-interactive
before).

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools: PCI: Fix compilation warnings

[ Upstream commit fef31ecaaf2c5c54db85b35e893bf8abec96b93f ]

Current compilation produces the following warnings:

tools/pci/pcitest.c: In function 'run_test':
tools/pci/pcitest.c:56:9: warning: unused variable 'time'
[-Wunused-variable]
  double time;
         ^~~~
tools/pci/pcitest.c:55:25: warning: unused variable 'end'
[-Wunused-variable]
  struct timespec start, end;
                         ^~~
tools/pci/pcitest.c:55:18: warning: unused variable 'start'
[-Wunused-variable]
  struct timespec start, end;
                  ^~~~~
tools/pci/pcitest.c:146:1: warning: control reaches end of non-void
function [-Wreturn-type]
 }
 ^

Fix them:
 - remove unused variables
 - change function return from int to void, since it's not used

Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
[lorenzo.pieralisi@arm.com: rewrote the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PM / hibernate: Check the success of generating md5 digest before hibernation

[ Upstream commit 749fa17093ff67b31dea864531a3698b6a95c26c ]

Currently if get_e820_md5() fails, then it will hibernate nevertheless.
Actually the error code should be propagated to upper caller so that
the hibernation could be aware of the result and terminates the process
if md5 digest fails.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: sh_flctl: Use proper enum for flctl_dma_fifo0_transfer

[ Upstream commit e2bfa4ca23d9b5a7bdfcf21319fad9b59e38a05c ]

Clang warns when one enumerated type is converted implicitly to another:

drivers/mtd/nand/raw/sh_flctl.c:483:46: warning: implicit conversion
from enumeration type 'enum dma_transfer_direction' to different
enumeration type 'enum dma_data_direction' [-Wenum-conversion]
                flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_DEV_TO_MEM) > 0)
                ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
drivers/mtd/nand/raw/sh_flctl.c:542:46: warning: implicit conversion
from enumeration type 'enum dma_transfer_direction' to different
enumeration type 'enum dma_data_direction' [-Wenum-conversion]
                flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_MEM_TO_DEV) > 0)
                ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
2 warnings generated.

Use the proper enums from dma_data_direction to satisfy Clang.

DMA_MEM_TO_DEV = DMA_TO_DEVICE = 1
DMA_DEV_TO_MEM = DMA_FROM_DEVICE = 2

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: at91: at91sam9x5cm: fix addressable nand flash size

[ Upstream commit 6f270d88a0c4a11725afd8fd2001ae408733afbf ]

at91sam9x5cm comes with a 2Gb NAND flash. Fix the rootfs size to
match this limit.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: at91: sama5d4_xplained: fix addressable nand flash size

[ Upstream commit df90fc64367ffdb6f1b5c0f0c4940d44832b0174 ]

sama5d4_xplained comes with a 4Gb NAND flash. Increase the rootfs
size to match this limit.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/xive: Move a dereference below a NULL test

[ Upstream commit cd5ff94577e004e0a4457e70d0ef3a030f4010b8 ]

Move the dereference of xc below the NULL test.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries: Fix how we iterate over the DTL entries

[ Upstream commit 9258227e9dd1da8feddb07ad9702845546a581c9 ]

When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set, we look up dtl_idx in
the lppaca to determine the number of entries in the buffer. Since
lppaca is in big endian, we need to do an endian conversion before using
this in our calculation to determine the number of entries in the
buffer. Without this, we do not iterate over the existing entries in the
DTL buffer properly.

Fixes: 7c105b63bd98 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries: Fix DTL buffer registration

[ Upstream commit db787af1b8a6b4be428ee2ea7d409dafcaa4a43c ]

When CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set, we register the DTL
buffer for a cpu when the associated file under powerpc/dtl in debugfs
is opened. When doing so, we need to set the size of the buffer being
registered in the second u32 word of the buffer. This needs to be in big
endian, but we are not doing the conversion resulting in the below error
showing up in dmesg:

dtl_start: DTL registration for cpu 0 (hw 0) failed with -4

Fix this in the obvious manner.

Fixes: 7c105b63bd98 ("powerpc: Add CONFIG_CPU_LITTLE_ENDIAN kernel config option.")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxgb4: Use proper enum in IEEE_FAUX_SYNC

[ Upstream commit 258b6d141878530ba1f8fc44db683822389de914 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:390:4: warning: implicit
conversion from enumeration type 'enum cxgb4_dcb_state' to different
enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion]
                        IEEE_FAUX_SYNC(dev, dcb);
                        ^~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.h:70:10: note: expanded
from macro 'IEEE_FAUX_SYNC'
                                            CXGB4_DCB_STATE_FW_ALLSYNCED);
                                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~

Use the equivalent value of the expected type to silence Clang while
resulting in no functional change.

CXGB4_DCB_STATE_FW_ALLSYNCED = CXGB4_DCB_INPUT_FW_ALLSYNCED = 3

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxgb4: Use proper enum in cxgb4_dcb_handle_fw_update

[ Upstream commit 3b0b8f0d9a259f6a428af63e7a77547325f8e081 ]

Clang warns when one enumerated type is implicitly converted to another.

drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:303:7: warning: implicit
conversion from enumeration type 'enum cxgb4_dcb_state' to different
enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion]
                         ? CXGB4_DCB_STATE_FW_ALLSYNCED
                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c:304:7: warning: implicit
conversion from enumeration type 'enum cxgb4_dcb_state' to different
enumeration type 'enum cxgb4_dcb_state_input' [-Wenum-conversion]
                         : CXGB4_DCB_STATE_FW_INCOMPLETE);
                           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2 warnings generated.

Use the equivalent value of the expected type to silence Clang while
resulting in no functional change.

CXGB4_DCB_STATE_FW_INCOMPLETE = CXGB4_DCB_INPUT_FW_INCOMPLETE = 2
CXGB4_DCB_STATE_FW_ALLSYNCED = CXGB4_DCB_INPUT_FW_ALLSYNCED = 3

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mei: samples: fix a signedness bug in amt_host_if_call()

[ Upstream commit 185647813cac080453cb73a2e034a8821049f2a7 ]

"out_buf_sz" needs to be signed for the error handling to work.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sunrpc: Fix connect metrics

[ Upstream commit 3968a8a5310404c2f0b9e4d9f28cab13a12bc4fd ]

For TCP, the logic in xprt_connect_status is currently never invoked
to record a successful connection. Commit 2a4919919a97 ("SUNRPC:
Return EAGAIN instead of ENOTCONN when waking up xprt->pending")
changed the way TCP xprt's are awoken after a connect succeeds.

Instead, change connection-oriented transports to bump connect_count
and compute connect_time the moment that XPRT_CONNECTED is set.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: keystone: Enable TISCI clocks if K3_ARCH

[ Upstream commit 2f149e6e14bcb5e581e49307b54aafcd6f74a74f ]

K3_ARCH uses TISCI for clocks as well. Enable the same
for the driver support.

Signed-off-by: Nishanth Menon <nm@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: fix build error when DX_DEBUG is defined

[ Upstream commit 799578ab16e86b074c184ec5abbda0bc698c7b0b ]

Enabling DX_DEBUG triggers the build error below.  info is an attribute
of  the dxroot structure.

linux/fs/ext4/namei.c:2264:12: error: ‘info’
undeclared (first use in this function); did you mean ‘insl’?
      info->indirect_levels));

Fixes: e08ac99fa2a2 ("ext4: add largedir feature")
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: timb_dma: Use proper enum in td_prep_slave_sg

[ Upstream commit 5e621f5d538985f010035c6f3e28c22829d36db1 ]

Clang warns when implicitly converting from one enumerated type to
another. Avoid this by using the equivalent value from the expected
type.

drivers/dma/timb_dma.c:548:27: warning: implicit conversion from
enumeration type 'enum dma_transfer_direction' to different enumeration
type 'enum dma_data_direction' [-Wenum-conversion]
                td_desc->desc_list_len, DMA_MEM_TO_DEV);
                                        ^~~~~~~~~~~~~~
1 warning generated.

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ep93xx: Return proper enum in ep93xx_dma_chan_direction

[ Upstream commit 9524d6b265f9b2b9a61fceb2ee2ce1c2a83e39ca ]

Clang warns when implicitly converting from one enumerated type to
another. Avoid this by using the equivalent value from the expected
type.

In file included from drivers/dma/ep93xx_dma.c:30:
./include/linux/platform_data/dma-ep93xx.h:88:10: warning: implicit
conversion from enumeration type 'enum dma_data_direction' to different
enumeration type 'enum dma_transfer_direction' [-Wenum-conversion]
                return DMA_NONE;
                ~~~~~~ ^~~~~~~~
1 warning generated.

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Inform the userspace about TCE update failures

[ Upstream commit f7960e299f13f069d6f3d4e157d91bfca2669677 ]

We return H_TOO_HARD from TCE update handlers when we think that
the next handler (realmode -> virtual mode -> user mode) has a chance to
handle the request; H_HARDWARE/H_CLOSED otherwise.

This changes the handlers to return H_TOO_HARD on every error giving
the userspace an opportunity to handle any request or at least log
them all.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: w83627hf_wdt: Support NCT6796D, NCT6797D, NCT6798D

[ Upstream commit 57cbf0e3a0fd48e5ad8f3884562e8dde4827c1c8 ]

The watchdog controller on NCT6796D, NCT6797D, and NCT6798D is compatible
with the wtachdog controller on other Nuvoton chips.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

irqchip/irq-mvebu-icu: Fix wrong private data retrieval

[ Upstream commit 2b4dab69dcca13c5be2ddaf1337ae4accd087de6 ]

The irq_domain structure has an host_data pointer that just stores
private data. It is meant to not be touched by the IRQ core. However,
when it comes to MSI, the MSI layer adds its own private data there
with a structure that also has a host_data pointer.

Because this IRQ domain is an MSI domain, to access private data we
should do a d->host_data->host_data, also wrapped as
'platform_msi_get_host_data()'.

This bug was lying there silently because the 'icu' structure retrieved
this way was just called by dev_err(), only producing a
'(NULL device *):' output on the console.

Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nl80211: Fix a GET_KEY reply attribute

[ Upstream commit efdfce7270de85a8706d1ea051bef3a7486809ff ]

Use the NL80211_KEY_IDX attribute inside the NL80211_ATTR_KEY in
NL80211_CMD_GET_KEY responses to comply with nl80211_key_policy.
This is unlikely to affect existing userspace.

Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: dwc3: gadget: Check ENBLSLPM before sending ep command

[ Upstream commit 87dd96111b0bb8e616fcbd74dbf4bb4182f2c596 ]

When operating in USB 2.0 speeds (HS/FS), if GUSB2PHYCFG.ENBLSLPM or
GUSB2PHYCFG.SUSPHY is set, it must be cleared before issuing an endpoint
command.

Current implementation only save and restore GUSB2PHYCFG.SUSPHY
configuration. We must save and clear both GUSB2PHYCFG.ENBLSLPM and
GUSB2PHYCFG.SUSPHY settings. Restore them after the command is
completed.

DWC_usb3 3.30a and DWC_usb31 1.90a programming guide section 3.2.2

Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: udc: fotg210-udc: Fix a sleep-in-atomic-context bug in fotg210_get_status()

[ Upstream commit 2337a77c1cc86bc4e504ecf3799f947659c86026 ]

The driver may sleep in an interrupt handler.
The function call path (from bottom to top) in Linux-4.17 is:

[FUNC] fotg210_ep_queue(GFP_KERNEL)
drivers/usb/gadget/udc/fotg210-udc.c, 744:
fotg210_ep_queue in fotg210_get_status
drivers/usb/gadget/udc/fotg210-udc.c, 768:
fotg210_get_status in fotg210_setup_packet
drivers/usb/gadget/udc/fotg210-udc.c, 949:
fotg210_setup_packet in fotg210_irq (interrupt handler)

To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC.
If possible, spin_unlock() and spin_lock() around fotg210_ep_queue()
can be also removed.

This bug is found by my static analysis tool DSAC.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath9k: fix reporting calculated new FFT upper max

[ Upstream commit 4fb5837ac2bd46a85620b297002c704e9958f64d ]

Since the debug print code is outside of the loop, it shouldn't use the loop
iterator anymore but instead print the found maximum index.

Cc: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ata: ahci_brcm: Allow using driver or DSL SoCs

[ Upstream commit 7fb44929cb0e5cdcde143e1ca3ca57b5b8247db0 ]

The Broadcom STB AHCI controller is the same as the one found on DSL
SoCs, so we will utilize the same driver on these systems as well.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: fix vdev-start timeout on error

[ Upstream commit 833fd34d743c728afe6d127ef7bee67e7d9199a8 ]

The vdev-start-response message should cause the
completion to fire, even in the error case.  Otherwise,
the user still gets no useful information and everything
is blocked until the timeout period.

Add some warning text to print out the invalid status
code to aid debugging, and propagate failure code.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64/numa: Report correct memblock range for the dummy node

[ Upstream commit 77cfe950901e5c13aca2df6437a05f39dd9a929b ]

The dummy node ID is marked into all memory ranges on the system. So the
dummy node really extends the entire memblock.memory. Hence report correct
extent information for the dummy node using memblock range helper functions
instead of the range [0LLU, PFN_PHYS(max_pfn) - 1)].

Fixes: 1a2db30034 ("arm64, numa: Add NUMA support for arm64 platforms")
Acked-by: Punit Agrawal <punit.agrawal@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kvm: arm/arm64: Fix stage2_flush_memslot for 4 level page table

[ Upstream commit d2db7773ba864df6b4e19643dfc54838550d8049 ]

So far we have only supported 3 level page table with fixed IPA of
40bits, where PUD is folded. With 4 level page tables, we need
to check if the PUD entry is valid or not. Fix stage2_flush_memslot()
to do this check, before walking down the table.

Acked-by: Christoffer Dall <cdall@kernel.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/io-pgtable-arm: Fix race handling in split_blk_unmap()

[ Upstream commit 85c7a0f1ef624ef58173ef52ea77780257bdfe04 ]

In removing the pagetable-wide lock, we gained the possibility of the
vanishingly unlikely case where we have a race between two concurrent
unmappers splitting the same block entry. The logic to handle this is
fairly straightforward - whoever loses the race frees their partial
next-level table and instead dereferences the winner's newly-installed
entry in order to fall back to a regular unmap, which intentionally
echoes the pre-existing case of recursively splitting a 1GB block down
to 4KB pages by installing a full table of 2MB blocks first.

Unfortunately, the chump who implemented that logic failed to update the
condition check for that fallback, meaning that if said race occurs at
the last level (where the loser's unmap_idx is valid) then the unmap
won't actually happen. Fix that to properly account for both the race
and recursive cases.

Fixes: 2c3d273eabe8 ("iommu/io-pgtable-arm: Support lockless operation")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[will: re-jig control flow to avoid duplicate cmpxchg test]
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/hfi1: Ensure ucast_dlid access doesnt exceed bounds

[ Upstream commit 3144533bf667c8e53bb20656b78295960073e57b ]

The dlid assignment made by looking into the u_ucast_dlid array does not
do an explicit check for the size of the array. The code path to arrive at
def_port, the index value is long and complicated so its best to just have
an explicit check here.

Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Fix priority queue fairness

[ Upstream commit f42f7c283078ce3c1e8368b140e270755b1ae313 ]

Fix up the priority queue to not batch by owner, but by queue, so that
we allow '1 << priority' elements to be dequeued before switching to
the next priority queue.
The owner field is still used to wake up requests in round robin order
by owner to avoid single processes hogging the RPC layer by loading the
queues.

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: sun8i: h3-h5: ir register size should be the whole memory block

[ Upstream commit 6c700289a3e84d5d3f2a95cf27732a7f7fce105b ]

The size of the register should be the size of the whole memory block,
not just the registers, that are needed.

Signed-off-by: Philipp Rossak <embed3d@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: return correct errno in f2fs_gc

[ Upstream commit 61f7725aa148ee870436a29d3a24d5c00ab7e9af ]

This fixes overriding error number in f2fs_gc.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: Fix for netdev not up problem when setting mtu

[ Upstream commit 93d8daf460183871a965dae339839d9e35d44309 ]

Currently hns3_nic_change_mtu will try to down the netdev before
setting mtu, and it does not up the netdev when the setting fails,
which causes netdev not up problem.

This patch fixes it by not returning when the setting fails.

Fixes: a8e8b7ff3517 ("net: hns3: Add support to change MTU in HNS3 hardware")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: omap5: enable OTG role for DWC3 controller

[ Upstream commit 656c1a65ab555ee5c7cd0d6aee8ab82ca3c1795f ]

Since SMPS10 and OTG cable detection extcon are described here, and
work to enable OTG power when an OTG cable is plugged in, we can
define OTG mode in the controller (which is disabled by default in
omap5.dtsi).

Tested on OMAP5EVM and Pyra.

Suggested-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: dra7: Enable workaround for errata i870 in PCIe host mode

[ Upstream commit b830526f304764753fcb8b4a563a94080e982a6c ]

Add ti,syscon-unaligned-access property to PCIe RC nodes to set
appropriate bits in CTRL_CORE_SMA_SW_7 register to enable workaround for
errata i870.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: xen-netback: fix return type of ndo_start_xmit function

[ Upstream commit a9ca7f17c6d240e269a24cbcd76abf9a940309dd ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ovs: fix return type of ndo_start_xmit function

[ Upstream commit eddf11e18dff0e8671e06ce54e64cfc843303ab9 ]

The method ndo_start_xmit() is defined as returning an 'netdev_tx_t',
which is a typedef for an enum type, so make sure the implementation in
this driver has returns 'netdev_tx_t' value, and change the function
return type to netdev_tx_t.

Found by coccinelle.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: Ditch fb_edid_add_monspecs

commit 3b8720e63f4a1fc6f422a49ecbaa3b59c86d5aaf upstream.

It's dead code ever since

commit 34280340b1dc74c521e636f45cd728f9abf56ee2
Author: Geert Uytterhoeven <geert+renesas@glider.be>
Date:   Fri Dec 4 17:01:43 2015 +0100

    fbdev: Remove unused SH-Mobile HDMI driver

Also with this gone we can remove the cea_modes db. This entire thing
is massively incomplete anyway, compared to the CEA parsing that
drm_edid.c does.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tavis Ormandy <taviso@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190721201956.941-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: uaccess: Ensure PAN is re-enabled after unhandled uaccess fault

commit 94bb804e1e6f0a9a77acf20d7c70ea141c6c821e upstream.

A number of our uaccess routines ('__arch_clear_user()' and
'__arch_copy_{in,from,to}_user()') fail to re-enable PAN if they
encounter an unhandled fault whilst accessing userspace.

For CPUs implementing both hardware PAN and UAO, this bug has no effect
when both extensions are in use by the kernel.

For CPUs implementing hardware PAN but not UAO, this means that a kernel
using hardware PAN may execute portions of code with PAN inadvertently
disabled, opening us up to potential security vulnerabilities that rely
on userspace access from within the kernel which would usually be
prevented by this mechanism. In other words, parts of the kernel run the
same way as they would on a CPU without PAN implemented/emulated at all.

For CPUs not implementing hardware PAN and instead relying on software
emulation via 'CONFIG_ARM64_SW_TTBR0_PAN=y', the impact is unfortunately
much worse. Calling 'schedule()' with software PAN disabled means that
the next task will execute in the kernel using the page-table and ASID
of the previous process even after 'switch_mm()', since the actual
hardware switch is deferred until return to userspace. At this point, or
if there is a intermediate call to 'uaccess_enable()', the page-table
and ASID of the new process are installed. Sadly, due to the changes
introduced by KPTI, this is not an atomic operation and there is a very
small window (two instructions) where the CPU is configured with the
page-table of the old task and the ASID of the new task; a speculative
access in this state is disastrous because it would corrupt the TLB
entries for the new task with mappings from the previous address space.

As Pavel explains:

  | I was able to reproduce memory corruption problem on Broadcom's SoC
  | ARMv8-A like this:
  |
  | Enable software perf-events with PERF_SAMPLE_CALLCHAIN so userland's
  | stack is accessed and copied.
  |
  | The test program performed the following on every CPU and forking
  | many processes:
  |
  | unsigned long *map = mmap(NULL, PAGE_SIZE, PROT_READ|PROT_WRITE,
  |   MAP_SHARED | MAP_ANONYMOUS, -1, 0);
  | map[0] = getpid();
  | sched_yield();
  | if (map[0] != getpid()) {
  | fprintf(stderr, "Corruption detected!");
  | }
  | munmap(map, PAGE_SIZE);
  |
  | From time to time I was getting map[0] to contain pid for a
  | different process.

Ensure that PAN is re-enabled when returning after an unhandled user
fault from our uaccess routines.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Cc: <stable@vger.kernel.org>
Fixes: 338d4f49d6f7 ("arm64: kernel: Add support for Privileged Access Never")
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
[will: rewrote commit message]
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memory_hotplug: fix updating the node span

commit 656d571193262a11c2daa4012e53e4d645bbce56 upstream.

We recently started updating the node span based on the zone span to
avoid touching uninitialized memmaps.

Currently, we will always detect the node span to start at 0, meaning a
node can easily span too many pages.  pgdat_is_empty() will still work
correctly if all zones span no pages.  We should skip over all zones
without spanned pages and properly handle the first detected zone that
spans pages.

Unfortunately, in contrast to the zone span (/proc/zoneinfo), the node
span cannot easily be inspected and tested.  The node span gives no real
guarantees when an architecture supports memory hotplug, meaning it can
easily contain holes or span pages of different nodes.

The node span is not really used after init on architectures that
support memory hotplug.

E.g., we use it in mm/memory_hotplug.c:try_offline_node() and in
mm/kmemleak.c:kmemleak_scan().  These users seem to be fine.

Link: http://lkml.kernel.org/r/20191027222714.5313-1-david@redhat.com
Fixes: 00d6c019b5bc ("mm/memory_hotplug: don't access uninitialized memmaps in shrink_pgdat_span()")
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memory_hotplug: don't access uninitialized memmaps in shrink_pgdat_span()

commit 00d6c019b5bc175cee3770e0e659f2b5f4804ea5 upstream.

We might use the nid of memmaps that were never initialized.  For
example, if the memmap was poisoned, we will crash the kernel in
pfn_to_nid() right now.  Let's use the calculated boundaries of the
separate zones instead.  This now also avoids having to iterate over a
whole bunch of subsections again, after shrinking one zone.

Before commit d0dc12e86b31 ("mm/memory_hotplug: optimize memory
hotplug"), the memmap was initialized to 0 and the node was set to the
right value.  After that commit, the node might be garbage.

We'll have to fix shrink_zone_span() next.

Link: http://lkml.kernel.org/r/20191006085646.5768-4-david@redhat.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [d0dc12e86b319]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Damian Tometzki <damian.tometzki@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jun Yao <yaojun8558363@gmail.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pankaj Gupta <pagupta@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Rich Felker <dalias@libc.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

idr: Fix idr_get_next race with idr_remove

commit 5c089fd0c73411f2170ab795c9ffc16718c7d007 upstream.

If the entry is deleted from the IDR between the call to
radix_tree_iter_find() and rcu_dereference_raw(), idr_get_next()
will return NULL, which will end the iteration prematurely.  We should
instead continue to the next entry in the IDR.  This only happens if the
iteration is protected by the RCU lock.  Most IDR users use a spinlock
or semaphore to exclude simultaneous modifications.  It was noticed once
the PID allocator was converted to use the IDR, as it uses the RCU lock,
but there may be other users elsewhere in the kernel.

We can't use the normal pattern of calling radix_tree_deref_retry()
(which catches both a retry entry in a leaf node and a node entry in
the root) as the IDR supports storing entries which are unaligned,
which will trigger an infinite loop if they are encountered.  Instead,
we have to explicitly check whether the entry is a retry entry.

Fixes: 0a835c4f090a ("Reimplement IDR and IDA using the radix tree")
Reported-by: Brendan Gregg <bgregg@netflix.com>
Tested-by: Brendan Gregg <bgregg@netflix.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: cdc_ncm: Signedness bug in cdc_ncm_set_dgram_size()

commit a56dcc6b455830776899ce3686735f1172e12243 upstream.

This code is supposed to test for negative error codes and partial
reads, but because sizeof() is size_t (unsigned) type then negative
error codes are type promoted to high positive values and the condition
doesn't work as expected.

Fixes: 332f989a3b00 ("CDC-NCM: handle incomplete transfer of MTU")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "OPP: Protect dev_list with opp_table lock"

This reverts commit 714ab224a8db6e8255c61a42613de9349ceb0bba which is
commit 3d2556992a878a2210d3be498416aee39e0c32aa upstream.

Turns out to break the build on the odroid machines, so it needs to be
reverted.

Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Cc: Niklas Cassel <niklas.cassel@linaro.org>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tee: optee: add missing of_node_put after of_device_is_available

commit c7c0d8df0b94a67377555a550b8d66ee2ad2f4ed upstream.

Add an of_node_put when a tested device node is not available.

The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):

// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@

e = f(...);
... when != of_node_put(e)
    when != x = e
    when != e = x
    when any
if (<+...of_device_is_available(e)...+>) {
  ... when != of_node_put(e)
(
  return e;
|
+ of_node_put(e);
  return ...;
)
}
// </smpl>

Fixes: db878f76b9ff ("tee: optee: take DT status property into account")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: mediatek: use correct mata->xfer_len when in fifo transfer

commit a4d8f64f7267a88d4688f5c216926f5f6cafbae6 upstream.

when xfer_len is greater than 64 bytes and use fifo mode
to transfer, the actual length from the third time is mata->xfer_len
but not len in mtk_spi_interrupt().

Signed-off-by: Leilk Liu <leilk.liu@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.155

slcan: Fix memory leak in error path

commit ed50e1600b4483c049ce76e6bd3b665a6a9300ed upstream.

This patch is fixing memory leak reported by Syzkaller:

BUG: memory leak unreferenced object 0xffff888067f65500 (size 4096):
  comm "syz-executor043", pid 454, jiffies 4294759719 (age 11.930s)
  hex dump (first 32 bytes):
    73 6c 63 61 6e 30 00 00 00 00 00 00 00 00 00 00 slcan0..........
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
  backtrace:
    [<00000000a06eec0d>] __kmalloc+0x18b/0x2c0
    [<0000000083306e66>] kvmalloc_node+0x3a/0xc0
    [<000000006ac27f87>] alloc_netdev_mqs+0x17a/0x1080
    [<0000000061a996c9>] slcan_open+0x3ae/0x9a0
    [<000000001226f0f9>] tty_ldisc_open.isra.1+0x76/0xc0
    [<0000000019289631>] tty_set_ldisc+0x28c/0x5f0
    [<000000004de5a617>] tty_ioctl+0x48d/0x1590
    [<00000000daef496f>] do_vfs_ioctl+0x1c7/0x1510
    [<0000000059068dbc>] ksys_ioctl+0x99/0xb0
    [<000000009a6eb334>] __x64_sys_ioctl+0x78/0xb0
    [<0000000053d0332e>] do_syscall_64+0x16f/0x580
    [<0000000021b83b99>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
    [<000000008ea75434>] 0xffffffffffffffff

Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memfd: Use radix_tree_deref_slot_protected to avoid the warning.

The commit 391d4ee568b5 ("memfd: Fix locking when tagging pins")
introduces the following warning messages.

*WARNING: suspicious RCU usage in memfd_wait_for_pins*

It is because we still use radix_tree_deref_slot without read_rcu_lock.
We should use radix_tree_deref_slot_protected instead in the case.

Cc: stable@vger.kernel.org
Fixes: 391d4ee568b5 ("memfd: Fix locking when tagging pins")
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: mdio-bcm-unimac: mark PM functions as __maybe_unused

[ Upstream commit 9b97123a584f60a5bca5a2663485768a1f6cd0a4 ]

The newly added runtime-pm support causes a harmless warning
when CONFIG_PM is disabled:

drivers/net/phy/mdio-bcm-unimac.c:330:12: error: 'unimac_mdio_resume' defined but not used [-Werror=unused-function]
 static int unimac_mdio_resume(struct device *d)
drivers/net/phy/mdio-bcm-unimac.c:321:12: error: 'unimac_mdio_suspend' defined but not used [-Werror=unused-function]
 static int unimac_mdio_suspend(struct device *d)

Marking the functions as __maybe_unused is the easiest workaround
and avoids adding #ifdef checks.

Fixes: b78ac6ecd1b6 ("net: phy: mdio-bcm-unimac: Allow configuring MDIO clock divider")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/iser: Fix possible NULL deref at iser_inv_desc()

[ Upstream commit 65f07f5a09dacf3b60619f196f096ea3671a5eda ]

In case target remote invalidates bogus rkey and signature is not used,
pi_ctx is NULL deref.

The commit also fails the connection on bogus remote invalidation.

Fixes: 59caaed7a72a ("IB/iser: Support the remote invalidation exception")
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fuse: use READ_ONCE on congestion_threshold and max_background

[ Upstream commit 2a23f2b8adbe4bd584f936f7ac17a99750eed9d7 ]

Since they are of unsigned int type, it's allowed to read them
unlocked during reporting to userspace. Let's underline this fact
with READ_ONCE() macroses.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: xhci-mtk: fix ISOC error when interval is zero

[ Upstream commit 87173acc0d8f0987bda8827da35fff67f52ad15d ]

If the interval equal zero, needn't round up to power of two
for the number of packets in each ESIT, so fix it.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: masquerade: don't flush all conntracks if only one address deleted on device

[ Upstream commit 097f95d319f817e651bd51f8846aced92a55a6a1 ]

We configured iptables as below, which only allowed incoming data on
established connections:

iptables -t mangle -A PREROUTING -m state --state ESTABLISHED -j ACCEPT
iptables -t mangle -P PREROUTING DROP

When deleting a secondary address, current masquerade implements would
flush all conntracks on this device. All the established connections on
primary address also be deleted, then subsequent incoming data on the
connections would be dropped wrongly because it was identified as NEW
connection.

So when an address was delete, it should only flush connections related
with the address.

Signed-off-by: Tan Hu <tan.hu@zte.com.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: armada38x: fix possible race condition

[ Upstream commit 7d61cbb945a753af08e247b5f10bdd5dbb8d6c80 ]

The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.

Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before requesting the IRQ.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: lpc32xx: Fix SPI controller node names

[ Upstream commit 11236ef582b8d66290bb3b3710e03ca1d85d8ad8 ]

SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.

Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: lg: Fix SPI controller node names

[ Upstream commit 09bae3b64cb580c95329bd8d16f08f0a5cb81ec9 ]

SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.

Cc: Chanho Min <chanho.min@lge.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: amd: Fix SPI bus warnings

[ Upstream commit e9f0878c4b2004ac19581274c1ae4c61ae3ca70e ]

dtc has new checks for SPI buses. Fix the warnings in node names.

arch/arm64/boot/dts/amd/amd-overdrive.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'

Cc: Brijesh Singh <brijeshkumar.singh@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: NCR5380: Check for bus reset

[ Upstream commit 6b0e87a6aafe12d75c2bea6fc8e49e88b98b3083 ]

The SR_RST bit isn't latched. Hence, detecting a bus reset isn't reliable.
When it is detected, the right thing to do is to drop all connected and
disconnected commands. The code for that is already present so refactor it and
call it when SR_RST is set.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: NCR5380: Handle BUS FREE during reselection

[ Upstream commit ca694afad707cb3ae2fdef3b28454444d9ac726e ]

The X3T9.2 specification (draft) says, under "6.1.4.2 RESELECTION time-out
procedure", that a target may assert RST or go to BUS FREE phase if the
initiator does not respond within 200 us. Something like this has been
observed with AztecMonster II target. When it happens, all we can do is wait
for the target to try again.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: NCR5380: Don't call dsprintk() following reselection interrupt

[ Upstream commit 08267216b3f8aa5adc204bdccf8deb72c1cd7665 ]

The X3T9.2 specification (draft) says, under "6.1.4.1 RESELECTION",

    ... The reselected initiator shall then assert the BSY signal
    within a selection abort time of its most recent detection of being
    reselected; this is required for correct operation of the time-out
    procedure.

The selection abort time is only 200 us which may be insufficient time for a
printk() call. Move the diagnostics to the error paths.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: NCR5380: Don't clear busy flag when abort fails

[ Upstream commit 45ddc1b24806cc8f1a09f23dd4e7b6e4a8ae36e1 ]

When NCR5380_abort() returns FAILED, the driver forgets that the target is
still busy. Hence, further commands may be sent to the target, which may fail
during selection and produce the error message, "reselection after won
arbitration?". Prevent this by leaving the busy flag set when NCR5380_abort()
fails.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: NCR5380: Check for invalid reselection target

[ Upstream commit 7ef55f6744c45e3d7c85a3f74ada39b67ac741dd ]

The X3T9.2 specification (draft) says, under "6.1.4.1 RESELECTION", that "the
initiator shall not respond to a RESELECTION phase if other than two SCSI ID
bits are on the DATA BUS." This issue (too many bits set) has been observed in
the wild, so add a check.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: NCR5380: Use DRIVER_SENSE to indicate valid sense data

[ Upstream commit 070356513963be6196142acff56acc8359069fa1 ]

When sense data is valid, call set_driver_byte(cmd, DRIVER_SENSE).  Otherwise
some callers of scsi_execute() will ignore sense data.  Don't set DID_ERROR or
DID_RESET just because sense data is missing.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: NCR5380: Withhold disconnect privilege for REQUEST SENSE

[ Upstream commit 7c8ed783c2faa1e3f741844ffac41340338ea0f4 ]

This is mostly needed because an AztecMonster II target has been observed
disconnecting REQUEST SENSE commands and then failing to reselect properly.

Suggested-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: NCR5380: Have NCR5380_select() return a bool

[ Upstream commit dad8261e643849ea134c7cd5c8e794e31d93b9eb ]

The return value is taken to mean "retry" or "don't retry". Change it to bool
to improve readability. Fix related comments. No functional change.

Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: NCR5380: Clear all unissued commands on host reset

[ Upstream commit 1aeeeed7f03c576f096eede7b0384f99a98f588c ]

When doing a host reset we should be clearing all outstanding commands, not
just the command triggering the reset.

[mkp: adjusted Hannes' SoB address]

Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ondrey Zary <linux@rainbow-software.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: Allow TKIP for AP mode

[ Upstream commit 6f3df8c1192c873a6ad9a76328920f6f85af90a8 ]

Support for setting keys for TKIP cipher suite was mistakenly removed
for AP mode. Fix this.

Fixes: 85aeb58cec1a ("iwlwifi: mvm: Enable security on new TX API")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>