Jack Steiner [Wed, 17 Jun 2009 23:28:19 +0000 (16:28 -0700)]
gru: bug fixes for GRU exception handling
Bug fixes for GRU exception handling. Additional fields from the CBR must
be returned to the user to allow the user to correctly diagnose GRU
exceptions.
Handle endcase in TFH TLB miss handling. Verify that TFH actually
indicates a pending exception.
Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Neil Horman [Wed, 17 Jun 2009 23:28:17 +0000 (16:28 -0700)]
kexec: sysrq: simplify sysrq-c handler
Currently the sysrq-c handler is bit over-engineered. Its behavior is
dependent on a few compile time and run time factors that alter its
behavior which is really unnecessecary.
If CONFIG_KEXEC is not configured, sysrq-c, crashes the system with a NULL
pointer dereference. If CONFIG_KEXEC is configured, it calls crash_kexec
directly, which implies that the kexec kernel will either be booted (if
its been previously loaded), or it will simply do nothing (the no kexec
kernel has been loaded).
It would be much easier to just simplify the whole thing to dereference a
NULL pointer all the time regardless of configuration. That way, it will
always try to crash the system, and if a kexec kernel has been loaded into
reserved space, it will still boot from the page fault trap handler
(assuming panic_on_oops is set appropriately).
[akpm@linux-foundation.org: build fix]
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: Brayan Arraes <brayan@yack.com.br>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Mack [Wed, 17 Jun 2009 23:28:15 +0000 (16:28 -0700)]
w1-gpio: add external pull-up enable callback
On embedded devices, sleep mode conditions can be tricky to handle,
Especially when processors tend to pull-down the w1 bus during sleep. Bus
slaves (such as the ds2760) may interpret this as a reason for power-down
conditions and entirely switch off the device.
This patch adds a callback function pointer to let users switch on and off
the external pull-up resistor. This lets the outside world know whether
the processor is currently actively driving the bus or not.
When this callback is not provided, the code behaviour won't change.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Ville Syrjala <syrjala@sci.fi>
Acked-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
FUJITA Tomonori [Wed, 17 Jun 2009 23:28:14 +0000 (16:28 -0700)]
dma-mapping: ia64: add CONFIG_DMA_API_DEBUG support
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: "Luck, Tony" <tony.luck@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc; "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
FUJITA Tomonori [Wed, 17 Jun 2009 23:28:13 +0000 (16:28 -0700)]
dma-mapping: ia64: use asm-generic/dma-mapping-common.h
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: "Luck, Tony" <tony.luck@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc; "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
FUJITA Tomonori [Wed, 17 Jun 2009 23:28:12 +0000 (16:28 -0700)]
dma-mapping: x86: use asm-generic/dma-mapping-common.h
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
FUJITA Tomonori [Wed, 17 Jun 2009 23:28:10 +0000 (16:28 -0700)]
dma-mapping: add asm-generic/dma-mapping-common.h
We unified x86 and IA64's handling of multiple dma mapping operations
(struct dma_map_ops in linux/dma-mapping.h) so we can remove duplication
in their arch/include/asm/dma-mapping.h.
This patchset adds include/asm-generic/dma-mapping-common.h that provides
some generic dma mapping function definitions for the users of struct
dma_map_ops. This enables us to remove about 100 lines. This also
enables us to easily add CONFIG_DMA_API_DEBUG support, which only x86
supports for now. The 4th patch adds CONFIG_DMA_API_DEBUG support to IA64
by adding only 8 lines.
This patch:
This header file provides some mapping function definitions that the users
of struct dma_map_ops can use.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Oberparleiter [Wed, 17 Jun 2009 23:28:09 +0000 (16:28 -0700)]
gcov: enable GCOV_PROFILE_ALL for x86_64
Enable gcov profiling of the entire kernel on x86_64. Required changes
include disabling profiling for:
* arch/kernel/acpi/realmode and arch/kernel/boot/compressed:
not linked to main kernel
* arch/vdso, arch/kernel/vsyscall_64 and arch/kernel/hpet:
profiling causes segfaults during boot (incompatible context)
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Li Wei <W.Li@Sun.COM>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Oberparleiter [Wed, 17 Jun 2009 23:28:08 +0000 (16:28 -0700)]
gcov: add gcov profiling infrastructure
Enable the use of GCC's coverage testing tool gcov [1] with the Linux
kernel. gcov may be useful for:
* debugging (has this code been reached at all?)
* test improvement (how do I change my test to cover these lines?)
* minimizing kernel configurations (do I need this option if the
associated code is never run?)
The profiling patch incorporates the following changes:
* change kbuild to include profiling flags
* provide functions needed by profiling code
* present profiling data as files in debugfs
Note that on some architectures, enabling gcc's profiling option
"-fprofile-arcs" for the entire kernel may trigger compile/link/
run-time problems, some of which are caused by toolchain bugs and
others which require adjustment of architecture code.
For this reason profiling the entire kernel is initially restricted
to those architectures for which it is known to work without changes.
This restriction can be lifted once an architecture has been tested
and found compatible with gcc's profiling. Profiling of single files
or directories is still available on all platforms (see config help
text).
[1] http://gcc.gnu.org/onlinedocs/gcc/Gcov.html
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Li Wei <W.Li@Sun.COM>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Oberparleiter [Wed, 17 Jun 2009 23:28:05 +0000 (16:28 -0700)]
seq_file: add function to write binary data
seq_write() can be used to construct seq_files containing arbitrary data.
Required by the gcov-profiling interface to synthesize binary profiling
data files.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Li Wei <W.Li@Sun.COM>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Peter Oberparleiter [Wed, 17 Jun 2009 23:28:03 +0000 (16:28 -0700)]
kernel: constructor support
Call constructors (gcc-generated initcall-like functions) during kernel
start and module load. Constructors are e.g. used for gcov data
initialization.
Disable constructor support for usermode Linux to prevent conflicts with
host glibc.
Signed-off-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Li Wei <W.Li@Sun.COM>
Cc: Michael Ellerman <michaele@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Heiko Carstens <heicars2@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <mschwid2@linux.vnet.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
GeunSik Lim [Wed, 17 Jun 2009 23:28:02 +0000 (16:28 -0700)]
edac: Kconfig: fix the meaning of EDAC abbreviation
Fix the meaning of EDAC(Error Detection And Correction) correctly.
[akpm@linux-foundation.org: add missing space]
Signed-off-by: GeunSik Lim <geunsik.lim@samsung.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Frysinger [Wed, 17 Jun 2009 23:28:01 +0000 (16:28 -0700)]
edac: add missing __devexit_p()
The remove function uses __devexit, so the .remove assignment needs
__devexit_p() to fix a build error with hotplug disabled.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Doug Thompson <dougthompson@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Harry Ciao [Wed, 17 Jun 2009 23:28:00 +0000 (16:28 -0700)]
edac: cpc925 MC platform device setup
Fix up the number of cells for the values of CPC925 Memory Controller,
and setup related platform device during system booting up, against
which CPC925 Memory Controller EDAC driver would be matched.
Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Harry Ciao [Wed, 17 Jun 2009 23:27:59 +0000 (16:27 -0700)]
edac: add edac_device_alloc_index()
Add edac_device_alloc_index(), because for MAPLE platform there may
exist several EDAC driver modules that could make use of
edac_device_ctl_info structure at the same time. The index allocation
for these structures should be taken care of by EDAC core.
[akpm@linux-foundation.org: cleanups]
Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Harry Ciao [Wed, 17 Jun 2009 23:27:58 +0000 (16:27 -0700)]
edac: add CPC925 Memory Controller driver
Introduce IBM CPC925 EDAC driver, which makes use of ECC, CPU and
HyperTransport Link error detections and corrections on the IBM
CPC925 Bridge and Memory Controller.
[akpm@linux-foundation.org: cleanup]
Signed-off-by: Harry Ciao <qingtao.cao@windriver.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Matt Helsley [Wed, 17 Jun 2009 23:27:58 +0000 (16:27 -0700)]
futex: documentation: fix inconsistent description of futex list_op_pending
Strictly speaking list_op_pending points to the 'lock entry', not the
'lock word' (which is actually at 'offset' from 'lock entry'). We can
infer this based on reading the code in kernel/futex.c:
struct robust_list __user *entry, *next_entry, *pending;
...
if (fetch_robust_entry(&pending, &head->list_op_pending, &pip))
return;
...
if (pending)
handle_futex_death((void __user *)pending + futex_offset,
curr, pip);
Which is also consistent with the rest of the docs on robust futex lists.
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linuxtronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Wed, 17 Jun 2009 23:27:57 +0000 (16:27 -0700)]
ipcns: move free_ipcs() proto
Function is really private to ipc/ and avoid struct kern_ipc_perm
forward declaration.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Wed, 17 Jun 2009 23:27:56 +0000 (16:27 -0700)]
ipcns: make free_ipc_ns() static
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Wed, 17 Jun 2009 23:27:56 +0000 (16:27 -0700)]
nsproxy: extract create_nsproxy()
clone_nsproxy() does useless copying of old nsproxy -- every pointer will
be rewritten to new ns or to old ns. Remove copying, rename
clone_nsproxy(), create_nsproxy() will be used by C/R code to create fresh
nsproxy on restart.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Wed, 17 Jun 2009 23:27:55 +0000 (16:27 -0700)]
ipcns: extract create_ipc_ns()
clone_ipc_ns() is misnamed, it doesn't clone anything and doesn't use
passed parameter. Rename it.
create_ipc_ns() will be used by C/R to create fresh ipcns.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Wed, 17 Jun 2009 23:27:54 +0000 (16:27 -0700)]
ipcns: remove useless get/put while CLONE_NEWIPC
copy_ipcs() doesn't actually copy anything. If new ipcns is created, it's
created from scratch, in this case get/put on old ipcns isn't needed.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Wed, 17 Jun 2009 23:27:54 +0000 (16:27 -0700)]
utsns: extract creeate_uts_ns()
create_uts_ns() will be used by C/R to create fresh uts_ns.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Wed, 17 Jun 2009 23:27:53 +0000 (16:27 -0700)]
pidns: rewrite copy_pid_ns()
copy_pid_ns() is a perfect example of a case where unwinding leads to more
code and makes it less clear. Watch the diffstat.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Reviewed-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alexey Dobriyan [Wed, 17 Jun 2009 23:27:52 +0000 (16:27 -0700)]
pidns: make create_pid_namespace() accept parent pidns
create_pid_namespace() creates everything, but caller has to assign parent
pidns by hand, which is unnatural. At the moment of call new ->level has
to be taken from somewhere and parent pidns is already available.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig [Wed, 17 Jun 2009 23:27:51 +0000 (16:27 -0700)]
pids: clean up find_task_by_pid variants
find_task_by_pid_type_ns is only used to implement find_task_by_vpid and
find_task_by_pid_ns, but both of them pass PIDTYPE_PID as first argument.
So just fold find_task_by_pid_type_ns into find_task_by_pid_ns and use
find_task_by_pid_ns to implement find_task_by_vpid.
While we're at it also remove the exports for find_task_by_pid_ns and
find_task_by_vpid - we don't have any modular callers left as the only
modular caller of he old pre pid namespace find_task_by_pid (gfs2) was
switched to pid_task which operates on a struct pid pointer instead of a
pid_t. Given the confusion about pid_t values vs namespace that's
generally the better option anyway and I think we're better of restricting
modules to do it that way.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sukanto Ghosh [Wed, 17 Jun 2009 23:27:50 +0000 (16:27 -0700)]
sysctl.c: remove unused variable
Remoce the unused variable 'val' from __do_proc_dointvec()
The integer has been declared and used as 'val = -val' and there is no
reference to it anywhere.
Signed-off-by: Sukanto Ghosh <sukanto.cse.iitb@gmail.com>
Cc: Jaswinder Singh Rajput <jaswinder@kernel.org>
Cc: Sukanto Ghosh <sukanto.cse.iitb@gmail.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Buesch [Wed, 17 Jun 2009 23:27:49 +0000 (16:27 -0700)]
ppdev: reduce kernel log spam
One of my programs frequently grabs the parport, does something with it
and then drops it again. This results in spamming of the kernel log with
"... registered pardevice"
"... unregistered pardevice"
These messages are completely useless, except for debugging ppdev,
probably. So put them under DEBUG (or dynamic debug).
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiri Slaby [Wed, 17 Jun 2009 23:27:48 +0000 (16:27 -0700)]
Char: isicom: fix build warning
Fix this:
isicom.c: In function `isicom_probe':
isicom.c:1587: warning: `signature' may be used uninitialized in this function
by uninitialized_var(), because if the signature is not initialized in
reset_card(), we won't use it.
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Adriano dos Santos Fernandes [Wed, 17 Jun 2009 23:27:48 +0000 (16:27 -0700)]
drivers/char/mem.c: memory_open() cleanup: lookup minor device number from devlist
memory_open() ignores devlist and does a switch for each item, duplicating
code and conditional definitions.
Clean it up by adding backing_dev_info to devlist and use it to lookup for
the minor device.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Adriano dos Santos Fernandes <adrianosf@uol.com.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Arnd Bergmann [Wed, 17 Jun 2009 23:27:46 +0000 (16:27 -0700)]
ipc: use __ARCH_WANT_IPC_PARSE_VERSION in ipc/util.h
The definition of ipc_parse_version depends on
__ARCH_WANT_IPC_PARSE_VERSION, but the header file declares it
conditionally based on the architecture.
Use the macro consistently to make it easier to add new architectures.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:45 +0000 (16:27 -0700)]
kthreads: simplify migration_thread() exit path
Now that kthread_stop() can be used even if the task has already exited,
we can kill the "wait_to_die:" loop in migration_thread(). But we must
pin rq->migration_thread after creation.
Actually, I don't think CPU_UP_CANCELED or CPU_DEAD should wait for
->migration_thread exit. Perhaps we can simplify this code a bit more.
migration_call() can set ->should_stop and forget about this thread. But
we need a new helper in kthred.c for that.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Vitaliy Gusev <vgusev@openvz.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:45 +0000 (16:27 -0700)]
kthreads: rework kthread_stop()
Based on Eric's patch which in turn was based on my patch.
kthread_stop() has the nasty problems:
- it runs unpredictably long with the global semaphore held.
- it deadlocks if kthread itself does kthread_stop() before it obeys
the kthread_should_stop() request.
- it is not useable if kthread exits on its own, see for example the
ugly "wait_to_die:" hack in migration_thread()
- it is not possible to just tell kthread it should stop, we must always
wait for its exit.
With this patch kthread() allocates all neccesary data (struct kthread) on
its own stack, globals kthread_stop_xxx are deleted. ->vfork_done is used
as a pointer into "struct kthread", this means kthread_stop() can easily
wait for kthread's exit.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Vitaliy Gusev <vgusev@openvz.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:43 +0000 (16:27 -0700)]
kthreads: simplify the startup synchronization
We use two completions two create the kernel thread, this is a bit ugly.
kthread() wakes up create_kthread() via ->started, then create_kthread()
wakes up the caller kthread_create() via ->done. But kthread() does not
need to wait for kthread(), it can just return. Instead kthread() itself
can wake up the caller of kthread_create().
Kill kthread_create_info->started, ->done is enough. This improves the
scalability a bit and sijmplifies the code.
The only problem if kernel_thread() fails, in that case create_kthread()
must do complete(&create->done).
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Vitaliy Gusev <vgusev@openvz.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Richard Kennedy [Wed, 17 Jun 2009 23:27:42 +0000 (16:27 -0700)]
mm: exit.c reorder wait_opts to remove padding on 64 bit builds
Reorder struct wait_opts to remove 8 bytes of alignment padding on 64 bit
builds.
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:42 +0000 (16:27 -0700)]
do_wait: fix the theoretical race with stop/trace/cont
do_wait:
current->state = TASK_INTERRUPTIBLE;
read_lock(&tasklist_lock);
... search for the task to reap ...
In theory, the ->state changing can leak into the critical section. Since
the child can change its status under read_lock(tasklist) in parallel
(finish_stop/ptrace_stop), we can miss the wakeup if __wake_up_parent()
sees us in TASK_RUNNING state. Add the barrier.
Also, use __set_current_state() to set TASK_RUNNING.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:41 +0000 (16:27 -0700)]
do_wait: kill the old BUG_ON, use while_each_thread()
do_wait() does BUG_ON(tsk->signal != current->signal), this looks like a
raher obsolete check. At least, I don't think do_wait() is the best place
to verify that all threads have the same ->signal. Remove it.
Also, change the code to use while_each_thread().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:40 +0000 (16:27 -0700)]
do_wait: simplify retval/tsk_result/notask_error mess
Now that we don't pass &retval down to other helpers we can simplify
the code more.
- kill tsk_result, just use retval
- add the "notask" label right after the main loop, and
s/got end/goto notask/ after the fastpath pid check.
This way we don't need to initialize retval before this
check and the code becomes a bit more clean, if this pid
has no attached tasks we should just skip the list search.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:39 +0000 (16:27 -0700)]
introduce "struct wait_opts" to simplify do_wait() patches
Introduce "struct wait_opts" which holds the parameters for misc helpers
in do_wait() pathes.
This adds 13 lines to kernel/exit.c, but saves 256 bytes from .o and imho
makes the code much more readable.
This patch temporary uglifies rusage/siginfo code a little bit, will be
addressed by further cleanups.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:39 +0000 (16:27 -0700)]
shift "ptrace implies WUNTRACED" from ptrace_do_wait() to wait_task_stopped()
No functional changes, preparation for the next patch.
ptrace_do_wait() adds WUNTRACED to options for wait_task_stopped() which
should always accept the stopped tracee, even if do_wait() was called
without WUNTRACED.
Change wait_task_stopped() to check "ptrace || WUNTRACED" instead. This
makes the code more explicit, and "int options" argument becomes const in
do_wait() pathes.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:38 +0000 (16:27 -0700)]
elf_core_dump: use rcu_read_lock() to access ->real_parent
In theory it is not safe to dereference ->parent/real_parent without
tasklist or rcu lock, we can race with re-parenting.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:37 +0000 (16:27 -0700)]
copy_process(): remove the unneeded clear_tsk_thread_flag(TIF_SIGPENDING)
The forked child can have TIF_SIGPENDING if it was copied from parent's
ti->flags. But this is harmless and actually almost never happens,
because copy_process() can't succeed if signal_pending() == T.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:36 +0000 (16:27 -0700)]
wait_task_zombie: do not use thread_group_cputime()
There is no reason for thread_group_cputime() in wait_task_zombie(), there
must be no other threads.
This call was previously needed to collect the per-cpu data which we do
not have any longer.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:36 +0000 (16:27 -0700)]
ptrace: don't take tasklist to get/set ->last_siginfo
Change ptrace_getsiginfo/ptrace_setsiginfo to use lock_task_sighand()
without tasklist_lock. Perhaps it makes sense to make a single helper
with "bool rw" argument.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:35 +0000 (16:27 -0700)]
ptrace: do_notify_parent_cldstop: fix the wrong ->nsproxy usage
If the non-traced sub-thread calls do_notify_parent_cldstop(), we send the
notification to group_leader->real_parent and we report group_leader's
pid.
But, if group_leader is traced we use the wrong ->parent->nsproxy->pid_ns,
the tracer and parent can live in different namespaces. Change the code
to use "parent" instead of tsk->parent.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:34 +0000 (16:27 -0700)]
ptrace: wait_task_zombie: s/->parent/->real_parent/
Change wait_task_zombie() to use ->real_parent instead of ->parent. We
could even use current afaics, but ->real_parent is more clean.
We know that the child is not ptrace_reparented() and thus they are equal.
But we should avoid using task_struct->parent, we are going to remove it.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:34 +0000 (16:27 -0700)]
ptrace_get_task_struct: s/tasklist/rcu/, make it static
- Use rcu_read_lock() instead of tasklist_lock to find/get the task
in ptrace_get_task_struct().
- Make it static, it has no callers outside of ptrace.c.
- The comment doesn't match the reality, this helper does not do
any checks. Beacuse it is really trivial and static I removed the
whole comment.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:33 +0000 (16:27 -0700)]
ptrace: do not use task_lock() for attach
Remove the "Nasty, nasty" lock dance in ptrace_attach()/ptrace_traceme() -
from now task_lock() has nothing to do with ptrace at all.
With the recent changes nobody uses task_lock() to serialize with ptrace,
but in fact it was never needed and it was never used consistently.
However ptrace_attach() calls __ptrace_may_access() and needs task_lock()
to pin task->mm for get_dumpable(). But we can call __ptrace_may_access()
before we take tasklist_lock, ->cred_exec_mutex protects us against
do_execve() path which can change creds and MMF_DUMP* flags.
(ugly, but we can't use ptrace_may_access() because it hides the error
code, so we have to take task_lock() and use __ptrace_may_access()).
NOTE: this change assumes that LSM hooks, security_ptrace_may_access() and
security_ptrace_traceme(), can be called without task_lock() held.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:32 +0000 (16:27 -0700)]
ptrace: cleanup check/set of PT_PTRACED during attach
ptrace_attach() and ptrace_traceme() are the last functions which look as
if the untraced task can have task->ptrace != 0, this must not be
possible. Change the code to just check ->ptrace != 0 and s/|=/=/ to set
PT_PTRACED.
Also, a couple of trivial whitespace cleanups in ptrace_attach().
And move ptrace_traceme() up near ptrace_attach() to keep them close to
each other.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:31 +0000 (16:27 -0700)]
ptrace: ptrace_attach: check PF_KTHREAD + exit_state instead of ->mm
- Add PF_KTHREAD check to prevent attaching to the kernel thread
with a borrowed ->mm.
With or without this change we can race with daemonize() which
can set PF_KTHREAD or clear ->mm after ptrace_attach() does the
check, but this doesn't matter because reparent_to_kthreadd()
does ptrace_unlink().
- Kill "!task->mm" check. We don't really care about ->mm != NULL,
and the task can call exit_mm() right after we drop task_lock().
What we need is to make sure we can't attach after exit_notify(),
check task->exit_state != 0 instead.
Also, move the "already traced" check down for cosmetic reasons.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:30 +0000 (16:27 -0700)]
ptrace: do not use task->ptrace directly in core kernel
No functional changes.
- Nobody except ptrace.c & co should use ptrace flags directly, we have
task_ptrace() for that.
- No need to specially check PT_PTRACED, we must not have other PT_ bits
set without PT_PTRACED. And no need to know this flag exists.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:29 +0000 (16:27 -0700)]
ptrace: tracehook_unsafe_exec(): remove the stale comment
tracehook_unsafe_exec() doesn't need task_lock(), remove the old comment.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:29 +0000 (16:27 -0700)]
ptrace: mm_need_new_owner: use ->real_parent to search in the siblings
"Search in the siblings" should use ->real_parent, not ->parent. If the
task is traced then ->parent == tracer, while the task's parent is always
->real_parent.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:27 +0000 (16:27 -0700)]
ptrace: remove PT_DTRACE from arch/m32r
m32r: PTRACE_SINGLESTEP sets PT_DTRACE, it is never used except cleared
after do_execve().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Hirokazu Takata <takata@linux-m32r.org>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:27 +0000 (16:27 -0700)]
ptrace: remove PT_DTRACE from m68k, m68knommu
m68k sets PT_DTRACE in trap_c() but never uses it.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:25 +0000 (16:27 -0700)]
ptrace: remove PT_DTRACE from avr32, mn10300, parisc, s390, sh, xtensa
avr32, mn10300, parisc, s390, sh, xtensa:
They never set PT_DTRACE, but clear it after do_execve().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Chris Zankel <chris@zankel.net>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:23 +0000 (16:27 -0700)]
ptrace: remove PT_DTRACE from arch/h8300
h8300 defines PT_DTRACE for asm but never uses it.
DEFINE(PT_PTRACED, PT_PTRACED) seems to be unused too.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Wed, 17 Jun 2009 23:27:23 +0000 (16:27 -0700)]
allow_signal: kill the bogus ->mm check, add a note about CLONE_SIGHAND
allow_signal() checks ->mm == NULL. Not sure why. Perhaps to make sure
current is the kernel thread. But this helper must not be used unless we
are the kernel thread, kill this check.
Also, document the fact that the CLONE_SIGHAND kthread must not use
allow_signal(), unless the caller really wants to change the parent's
->sighand->action as well.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KAMEZAWA Hiroyuki [Wed, 17 Jun 2009 23:27:21 +0000 (16:27 -0700)]
memcg: fix lru rotation in isolate_pages
Try to fix memcg's lru rotation sanity: make memcg use the same logic as
the global LRU does.
Now, at __isolate_lru_page() retruns -EBUSY, the page is rotated to the
tail of LRU in global LRU's isolate LRU pages. But in memcg, it's not
handled. This makes memcg do the same behavior as global LRU and rotate
LRU in the page is busy.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daisuke Nishimura [Wed, 17 Jun 2009 23:27:20 +0000 (16:27 -0700)]
memcg: add interface to reset limits
We don't have an interface to reset mem.limit or memsw.limit now.
This patch allows to reset mem.limit or memsw.limit when they are being
set to -1.
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KAMEZAWA Hiroyuki [Wed, 17 Jun 2009 23:27:19 +0000 (16:27 -0700)]
memcg: fix behavior under memory.limit equals to memsw.limit
A user can set memcg.limit_in_bytes == memcg.memsw.limit_in_bytes when the
user just want to limit the total size of applications, in other words,
not very interested in memory usage itself. In this case, swap-out will
be done only by global-LRU.
But, under current implementation, memory.limit_in_bytes is checked at
first and try_to_free_page() may do swap-out. But, that swap-out is
useless for memsw.limit_in_bytes and the thread may hit limit again.
This patch tries to fix the current behavior at memory.limit ==
memsw.limit case. And documentation is updated to explain the behavior of
this special case.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KAMEZAWA Hiroyuki [Wed, 17 Jun 2009 23:27:17 +0000 (16:27 -0700)]
memcg: fix swap accounting
This patch fixes mis-accounting of swap usage in memcg.
In the current implementation, memcg's swap account is uncharged only when
swap is completely freed. But there are several cases where swap cannot
be freed cleanly. For handling that, this patch changes that memcg
uncharges swap account when swap has no references other than cache.
By this, memcg's swap entry accounting can be fully synchronous with the
application's behavior.
This patch also changes memcg's hooks for swap-out.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: Balbir Singh <balbir@in.ibm.com>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zefan [Wed, 17 Jun 2009 23:27:16 +0000 (16:27 -0700)]
memcg: remove unneeded forward declaration from sched.h
This forward declaration seems pointless.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zefan [Wed, 17 Jun 2009 23:27:15 +0000 (16:27 -0700)]
memcg: remove some redundant checks
We don't need to check do_swap_account in the case that the function which
checks do_swap_account will never get called if do_swap_account == 0.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daisuke Nishimura [Wed, 17 Jun 2009 23:27:15 +0000 (16:27 -0700)]
memcg: remove mem_cgroup_cache_charge_swapin()
mem_cgroup_cache_charge_swapin() isn't used any more, so remove no-op
definition of it in header file.
Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Balbir Singh [Wed, 17 Jun 2009 23:26:34 +0000 (16:26 -0700)]
memcg: add file-based RSS accounting
Add file RSS tracking per memory cgroup
We currently don't track file RSS, the RSS we report is actually anon RSS.
All the file mapped pages, come in through the page cache and get
accounted there. This patch adds support for accounting file RSS pages.
It should
1. Help improve the metrics reported by the memory resource controller
2. Will form the basis for a future shared memory accounting heuristic
that has been proposed by Kamezawa.
Unfortunately, we cannot rename the existing "rss" keyword used in
memory.stat to "anon_rss". We however, add "mapped_file" data and hope to
educate the end user through documentation.
[hugh.dickins@tiscali.co.uk: fix mem_cgroup_update_mapped_file_stat oops]
Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Li Zefan <lizf@cn.fujitsu.cn>
Cc: Paul Menage <menage@google.com>
Cc: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: YAMAMOTO Takashi <yamamoto@valinux.co.jp>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zefan [Wed, 17 Jun 2009 23:26:33 +0000 (16:26 -0700)]
devcgroup: skip superfluous checks when found the DEV_ALL elem
While walking through the whitelist, if the DEV_ALL item is found, no more
check is needed.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Li Zefan [Wed, 17 Jun 2009 23:26:33 +0000 (16:26 -0700)]
cgroups: forbid noprefix if mounting more than just cpuset subsystem
The 'noprefix' option was introduced for backwards-compatibility of
cpuset, but actually it can be used when mounting other subsystems.
This results in possibility of name collision, and now the collision can
really happen, because we have 'stat' file in both memory and cpuacct
subsystem:
# mount -t cgroup -o noprefix,memory,cpuacct xxx /mnt
Cgroup will happily mount the 2 subsystems, but only 'stat' file of memory
subsys can be seen.
We don't want users to use nopreifx, and also want to avoid name
collision, so we change to allow noprefix only if mounting just the cpuset
subsystem.
[akpm@linux-foundation.org: fix shift for cpuset_subsys_id >= 32]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: Dhaval Giani <dhaval@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Wed, 17 Jun 2009 23:26:32 +0000 (16:26 -0700)]
cgroups: make messages more readable
Fix some cgroup messages to read better.
Update MAINTAINERS to include mm/*cgroup* files.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Paul Menage <menage@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jaswinder Singh Rajput [Wed, 17 Jun 2009 23:26:30 +0000 (16:26 -0700)]
Documentation/connector/cn_test.c comment unused cn_test_want_notify()
Currently cn_test_want_notify() has no user.
So add an ifdef and a comment which tells us to not remove it.
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jose Luis Perez Diez [Wed, 17 Jun 2009 23:26:30 +0000 (16:26 -0700)]
Documentation/Changes: perl is needed to build the kernel
Perl is used on the kernel Makefile to generate documentation, firmwares
in c source form, sources, graphs, and some headers and this fact is
undocumented.
[akpm@linux-foundation.org: 80-columns, please]
Signed-off-by: Jose Luis Perez Diez <jluis@escomposlinux.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jeff Mahoney [Wed, 17 Jun 2009 23:26:29 +0000 (16:26 -0700)]
reiserfs: fix warnings with gcc 4.4
Several code paths in reiserfs have a construct like:
if (is_direntry_le_ih(ih = B_N_PITEM_HEAD(src, item_num))) ...
which, in addition to being ugly, end up causing compiler warnings with
gcc 4.4.0. Previous compilers didn't issue a warning.
fs/reiserfs/do_balan.c:1273: warning: operation on `aux_ih' may be undefined
fs/reiserfs/lbalance.c:393: warning: operation on `ih' may be undefined
fs/reiserfs/lbalance.c:421: warning: operation on `ih' may be undefined
fs/reiserfs/lbalance.c:777: warning: operation on `ih' may be undefined
I believe this is due to the ih being passed to macros which evaluate the
argument more than once. This is old code and we haven't seen any
problems with it, but this patch eliminates the warnings.
It converts the multiple evaluation macros to static inlines and does a
preassignment for the cases that were causing the warnings because that
code is just ugly.
Reported-by: Chris Mason <mason@oracle.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roel Kluin [Wed, 17 Jun 2009 23:26:28 +0000 (16:26 -0700)]
ufs: sector_t cannot be negative
unsigned i_block,fragment cannot be negative.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 17 Jun 2009 23:26:27 +0000 (16:26 -0700)]
isofs: cleanup mount option processing
Remove unused variables from isofs_sb_info (used to be some mount
options), unify variables for option to use 0/1 (some options used
'y'/'n'), use bit fields for option flags in superblock.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 17 Jun 2009 23:26:27 +0000 (16:26 -0700)]
isofs: fix setting of uid and gid to 0
isofs allows setting of default uid and gid of files but value 0 was used
to indicate that user did not specify any uid/gid mount option. Since
this option also overrides uid/gid set in Rock Ridge extension, it makes
sense to allow forcing uid/gid 0. Fix option processing to allow this.
Cc: <Hans-Joachim.Baader@cjt.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 17 Jun 2009 23:26:25 +0000 (16:26 -0700)]
isofs: let mode and dmode mount options override rock ridge mode setting
So far, permissions set via 'mode' and/or 'dmode' mount options were
effective only if the medium had no rock ridge extensions (or was mounted
without them). Add 'overriderockmode' mount option to indicate that these
options should override permissions set in rock ridge extensions. Maybe
this should be default but the current behavior is there since mount
options were created so I think we should not change how they behave.
Cc: <Hans-Joachim.Baader@cjt.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 17 Jun 2009 23:26:24 +0000 (16:26 -0700)]
ext3: make sure inode is deleted from orphan list after truncate
As Ted pointed out, it can happen that ext3_truncate() returns without
removing inode from orphan list. This way we could in some rare cases
(like when we get ENOMEM from an allocation in ext3_truncate called
because of failed ext3_write_begin) leave the inode on orphan list and
that triggers assertion failure on umount.
So make ext3_truncate() always remove inode from in-memory orphan list.
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hisashi Hifumi [Wed, 17 Jun 2009 23:26:23 +0000 (16:26 -0700)]
jbd: clean up journal_try_to_free_buffers()
I delete the following patch
"commit
3f31fddfa26b7594b44ff2b34f9a04ba409e0f91
Author: Mingming Cao <cmm@us.ibm.com>
Date: Fri Jul 25 01:46:22 2008 -0700
jbd: fix race between free buffer and commit transaction
This patch is no longer needed because if race between freeing buffer and
committing transaction functionality occurs and dio gets error, currently
dio falls back to buffered IO by the following patch.
commit
6ccfa806a9cfbbf1cd43d5b6aa47ef2c0eb518fd
Author: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Date: Tue Sep 2 14:35:40 2008 -0700
VFS: fix dio write returning EIO when try_to_release_page fails
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Mingming Cao <cmm@us.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 17 Jun 2009 23:26:23 +0000 (16:26 -0700)]
ext3: fix chain verification in ext3_get_blocks()
Chain verification in ext3_get_blocks() has been hosed since it called
verify_chain(chain, NULL) which always returns success. As a result
readers could in theory race with truncate. On the other hand the race
probably cannot happen with the current locking scheme, since by the
time ext3_truncate() is called all the pages are already removed and
hence get_block() shouldn't be called on such pages...
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michael Shields [Wed, 17 Jun 2009 23:26:22 +0000 (16:26 -0700)]
Doc fix: ext2 can only have 32,000 subdirs, not 32,768
ext2.txt says that dirs can have 32,768 subdirs, but the actual value of
EXT2_LINK_MAX is 32000.
ext3 is the same, but the doc does not mention it. One of ext4's features
is to "fix 32000 subdirectory limit".
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jan Kara [Wed, 17 Jun 2009 23:26:20 +0000 (16:26 -0700)]
ext2: Do not update mtime of a moved directory
One of our users is complaining that his backup tool is upset on ext2
(while it's happy on ext3, xfs, ...) because of the mtime change.
The problem is:
mkdir foo
mkdir bar
mkdir foo/a
Now under ext2:
mv foo/a foo/b
changes mtime of 'foo/a' (foo/b after the move). That does not really
make sense and it does not happen under any other filesystem I've seen.
More complicated is:
mv foo/a bar/a
This changes mtime of foo/a (bar/a after the move) and it makes some
sense since we had to update parent directory pointer of foo/a. But
again, no other filesystem does this. So after some thoughts I'd vote
for consistency and change ext2 to behave the same as other filesystems.
Do not update mtime of a moved directory. Specs don't say anything
about it (neither that it should, nor that it should not be updated) and
other common filesystems (ext3, ext4, xfs, reiserfs, fat, ...) don't do
it. So let's become more consistent.
Spotted by ronny.pretzsch@dfs.de, initial fix by Jörn Engel.
Reported-by: <ronny.pretzsch@dfs.de>
Cc: <hare@suse.de>
Cc: Jörn Engel <joern@logfs.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nate Case [Wed, 17 Jun 2009 23:26:18 +0000 (16:26 -0700)]
gpio: pca953x: Add support for PCA9556
PCA9556 is the software-compatible predecessor to the PCA9557, so add it
to the supported I2C device ID table.
Signed-off-by: Nate Case <ncase@xes-inc.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nate Case [Wed, 17 Jun 2009 23:26:17 +0000 (16:26 -0700)]
gpio: pca953x: Get platform_data from OpenFirmware
On OpenFirmware platforms, it makes the most sense to get platform_data
from the device tree. Make an attempt to translate OF node properties
into platform_data struct before bailing out.
Note that the implementation approach taken differs from other device
drivers that make use of device tree information. This is because I2C
chips are already registered automatically by of_i2c, so we can get by
with a small translator function in the driver.
[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: kfree(NULL) is legal]
Signed-off-by: Nate Case <ncase@xes-inc.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Frysinger [Wed, 17 Jun 2009 23:26:16 +0000 (16:26 -0700)]
gpio: max7301: add missing __devexit marking
The remove member of the spi_driver max7301_driver uses __devexit_p(), so
the remove function itself should be marked with __devexit. Even more so
considering the probe function is marked with __devinit.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Juergen Beisert <j.beisert@pengutronix.de>
Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Silverstone [Wed, 17 Jun 2009 23:26:15 +0000 (16:26 -0700)]
pca953x: support GPIOLIB GPIO naming
Add support to the PCA953x driver to use the GPIOLIB naming facility for
GPIOs.
Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk>
Cc: Ben Gardner <bgardner@wabtec.com>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Frysinger [Wed, 17 Jun 2009 23:26:14 +0000 (16:26 -0700)]
drivers/char/rtc: disable legacy RTC driver on Blackfin systems
Blackfin platforms do not support the hardware which this driver drives.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Atsushi Nemoto [Wed, 17 Jun 2009 23:26:13 +0000 (16:26 -0700)]
rtc-ds1553: drop IRQF_SHARED
IRQF_SHARED should not be used with IRQF_DISABLED. There is no in-tree
user of this driver and only out-of-tree user I know uses a dedicated irq
line for this RTC.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Atsushi Nemoto [Wed, 17 Jun 2009 23:26:12 +0000 (16:26 -0700)]
rtc-tx4939: drop IRQF_SHARED
IRQF_SHARED should not be used with IRQF_DISABLED. This RTC have a
dedicated irq line to SoC's internal interrupt controller so there is
no reason to use IRQF_SHARED.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wolfgang Grandegger [Wed, 17 Jun 2009 23:26:11 +0000 (16:26 -0700)]
rtc: add stand-alone driver for RX8025 chip
Add support for the Epson RX-8025SA/NB RTC chips. It includes support for
alarms, periodic interrupts (1 Hz) and clock precision adjustment.
For clock precision adjustment, the SYSFS file "clock_adjust_ppb" gets
created in "/sys/class/rtc/rtcX/device". It permits to set and get the
clock adjustment in ppb (parts per billion), e.g.:
# echo -183000 > /sys/class/rtc/rtc0/device/clock_adjust_ppb
# cat /sys/class/rtc/rtc0/device/clock_adjust_ppb
-183000
This allows to compensate temperature dependent clock drifts. According
to the RX8025 SA/NB application manual the frequency and temperature
characteristics can be approximated using the following equation:
df = a * (ut - t)**2
df: Frequency deviation in any temperature
a : Coefficient = (-35 +-5) * 10**-9
ut: Ultimate temperature in degree = +25 +-5 degree
t : Any temperature in degree
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Wolfram Sang [Wed, 17 Jun 2009 23:26:10 +0000 (16:26 -0700)]
rtc: rtc-ds1307 add ds3231
Add ds3231 variant. For that, the BBSQI bit position was changed from a
simple define into a lookup-array as it differs. This also removes
writing to an unused bit in case of the ds1337.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joakim Tjernlund [Wed, 17 Jun 2009 23:26:08 +0000 (16:26 -0700)]
rtc: rtc-ds1307 add ds1388
Extend the ds1307 driver to support ds1388 too.
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Torsten Ertbjerg Rasmussen [Wed, 17 Jun 2009 23:26:07 +0000 (16:26 -0700)]
rtc: rtc-ds1742 nvram attribute fix
The RTC driver for ds1742 / ds1743 uses a static nvram attribute. This
patch replaces this static attribute with one nvram attribute for each
ds174x registered.
The nvram size is not the same for all types of ds174x. The nvram size is
accessible as the file size of the nvram attribute in sysfs. With only a
single nvram attribute, this file size will be incorrect if more than one
type of ds174x is present on a system. See the comment in the removed
code below.
This patch have been tested with linux-2.6.28 and linux-2.6.29-rc5/6 on a
custom board with one ds1743.
Signed-off-by: Torsten Ertbjerg Rasmussen <ertbjerg@gmail.com>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jiri Pirko [Wed, 17 Jun 2009 23:26:06 +0000 (16:26 -0700)]
spi: fix spi_write_then_read() comment
Buffer needs not be dma-safe, not rx data length.
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Daniel Ribeiro [Wed, 17 Jun 2009 23:26:06 +0000 (16:26 -0700)]
pxa2xx_spi: fix for SPI_CS_HIGH
Commit
a7bb3909b3293d503211d7f6af8ed62c1644b686 ("spi: pxa2xx_spi:
introduce chipselect GPIO to simplify the common cases") introduces
chipselect GPIO, and configures the CS polarity using SPI_CS_HIGH
spi->mode flag. Add SPI_CS_HIGH to the allowed modes.
Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Anton Vorontsov [Wed, 17 Jun 2009 23:26:05 +0000 (16:26 -0700)]
mpc52xx_psc_spi: convert to cs_control callback
mpc52xx_psc_spi driver is the last user of the legacy activate_cs and
deactivate_cs callbacks, so convert the driver to the cs_control hook and
remove the legacy callbacks from fsl_spi_platform_data struct.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Brownell [Wed, 17 Jun 2009 23:26:04 +0000 (16:26 -0700)]
spi: move more spi_setup() functionality into core
Move some common spi_setup() error checks into the SPI framework from the
spi_master controller drivers:
- Add a new "mode_bits" field to spi_master
- Use that in spi_setup to validate the spi->mode value being
requested. Setting this new field is now mandatory for any
controller supporting more than vanilla SPI_MODE_0.
- Update all spi_master drivers to:
* Initialize that field
* Remove current spi_setup() checks using that value.
This is a net minor code shrink.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Brownell [Wed, 17 Jun 2009 23:26:03 +0000 (16:26 -0700)]
spi: move common spi_setup() functionality into core
Start moving some spi_setup() functionality into the SPI core from the
various spi_master controller drivers:
- Make that function stop being an inline;
- Move two common idioms from drivers into that new function:
* Default bits_per_word to 8 if that field isn't set
* Issue a standardized dev_dbg() message
This is a net minor source code shrink, and supports enhancments found in
some follow-up patches.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roel Kluin [Wed, 17 Jun 2009 23:26:02 +0000 (16:26 -0700)]
spi_bfin5xx: limit reaches -1
bfin_spi_flush() returns limit, which reaches -1 upon timeout. but in
function bfin_spi_pump_transfers() it is compared with 0.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stefani Seibold [Wed, 17 Jun 2009 23:26:01 +0000 (16:26 -0700)]
proc.txt: update kernel filesystem/proc.txt documentation
An update for the "Process-Specific Subdirectories" section to reflect the
changes till kernel 2.6.30.
Signed-off-by: Stefani Seibold <stefani@seibold.net>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cyrill Gorcunov [Wed, 17 Jun 2009 23:26:00 +0000 (16:26 -0700)]
proc: vmcore - use kzalloc in get_new_element()
Instead of kmalloc+memset better use straight kzalloc
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / log