uvesafb: add connector entries

Add connector idx and val constants for v86d and uvesafb.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

connector: change connector's max message size

Change the maximum message size to 16k to allow transfers of VBE
data blocks from userspace.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: export fb_destroy_modelist

Make fb_destroy_modelist an exported symbol for use in the uvesafb driver.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: allow validated RTC_PIE_ON for non-root

drivers/char/rtc.c allowed RTC_PIE_ON ioctls for non-root users, as long as
the current interval (set via RTC_IRQP_SET) is <= max_user_freq.  Allow
RTC_PIE_ON under the same conditions when /dev/rtc* is handled by the rtc
subsystem.

Signed-off-by: Bryan Kadzban <bryan@kdzbn.homelinux.net>
Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: add max_user_freq to sysfs

drivers/char/rtc.c exposed a sysctl to change the maximum frequency at
which a non-root user could ask the RTC to generate interrupts (via the
RTC_IRQP_SET ioctl).  This value is no longer available under the new RTC
subsystem, so add it to sysfs for each RTC device.

Works for me on x86_64 (both reads and writes), using rtc-cmos.

Signed-off-by: Bryan Kadzban <bryan@kdzbn.homelinux.net>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-cmos probe() cleanup

Some cleanups for the rtc-cmos probe logic:

 - Claim i/o ports with request_region() not request_resource(),
   for better coexistence betwen platform and pnp bus glues.

 - Claim those ports earlier, to help work around procfs bugs
   (it allows duplicate names, like /proc/driver/rtc).

 - Fix some glitches in cleanup code, notably a cut'n'paste-o
   where the i/o port region might not get released during
   cleanup after a probe fault.

And some comment clarifications, including noting that this code
must work with PNPBIOS not just PNPACPI..

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: fix readback from /sys/class/rtc/rtc?/wakealarm

Fix readback of RTC alarms on platforms which return -1 in
non-hardware-supported RTC alarm fields.

To fill in the missing (-1) values, we grab an RTC timestamp along with the
RTC alarm value, and use the timestamp fields to populate the missing alarm
fields.

To counter field-wrap races (since the timestamp and alarm are not read
together atomically), we read the RTC timestamp both before and after
reading the RTC alarm value, and then check for wrapped fields --> if any
have wrapped, we know we have a possible inconsistency, so we loop and
reread the timestamp and alarm again.

Wrapped fields in the RTC timestamps are an issue because rtc-cmos.c, for
example, also gets/uses an RTC timestamp internally while fetching the RTC
alarm.  If our timestamp here wasn't the same (minutes and higher) as what
was used internally there, then we might end up populating the -1 fields
with inconsistent values.

This fixes readbacks from /sys/class/rtc/rtc?/wakealarm, as well as other
code paths which call rtc_read_alarm().

Signed-off-by: Mark Lord <mlord@pobox.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: RTC class driver for the ds1374

This patch adds an RTC class driver for the Maxim/Dallas 1374 RTC chip,
based on drivers/i2c/chips/ds1374.c.  It supports alarm functionality.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-pcf8583: Check for i2c adapter functionality

Not all i2c adapters support I2C-level messaging.  Check that the adapter
does before probing for a PCF8583 chip, as the driver makes use of
i2c_transfer and i2c_master_send.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: make rtc-ds1742 driver hotplug-aware

The rtc-ds1742 platform driver name doesn't match its module name,
which might prevents it from properly hotplugging.  There is only two
in-tree user of its driver, which are fixed by this patch too.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: make rtc-ds1553 driver hotplug-aware

The rtc-ds1553 platform driver name doesn't match its module name, which
might prevent it from properly hotplugging.  This driver has no in-tree
users.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-dev: no need to convert file->private_data to rtc device

In rtc-dev.c, when a rtc device is opened, file->private_data is already
attached with the rtc device pointer, so there is no need to call
to_rtc_device() to convert file->private_data to a rtc device pointer.

Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Mark Zhan <rongkai.zhan@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc_irq_set_freq() requires power-of-two and associated kerneldoc

RTC periodic IRQs are only defined to work for 2^N Hz values.  This patch
moves that validity check into the infrastructure, so drivers don't need to
check it; and adds kerneldoc for the two interface functions related to
periodic IRQs.  (One of which was quite mysterious until its first use was
recently checked in!)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

RTC: periodic irq fix

Add kernel/kernel and kernel/user locking for the periodic irq feature of
the rtc class.

PIE ioctls are also supported.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ecryptfs: clean up page flag handling

The functions that eventually call down to ecryptfs_read_lower(),
ecryptfs_decrypt_page(), and ecryptfs_copy_up_encrypted_with_header()
should have the responsibility of managing the page Uptodate
status. This patch gets rid of some of the ugliness that resulted from
trying to push some of the page flag setting too far down the stack.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: replace magic numbers

Replace some magic numbers with sizeof() equivalents.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: remove unused functions and kmem_cache

The switch to read_write.c routines and the persistent file make a number of
functions unnecessary.  This patch removes them.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: initialize persistent lower file on inode create

Initialize persistent lower file on inode create.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: fix data types

Update data types and add casts in order to avoid potential overflow
issues.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: convert mmap functions to use persistent file

Convert readpage, prepare_write, and commit_write to use read_write.c
routines.  Remove sync_page; I cannot think of a good reason for implementing
that in eCryptfs.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: make open, truncate, and setattr use persistent file

Rather than open a new lower file for every eCryptfs file that is opened,
truncated, or setattr'd, instead use the existing lower persistent file for
the eCryptfs inode.  Change truncate to use read_write.c functions.  Change
ecryptfs_getxattr() to use the common ecryptfs_getxattr_lower() function.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: update metadata read/write functions

Update the metadata read/write functions and grow_file() to use the
read_write.c routines.  Do not open another lower file; use the persistent
lower file instead.  Provide a separate function for
crypto.c::ecryptfs_read_xattr_region() to get to the lower xattr without
having to go through the eCryptfs getxattr.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: set up and destroy persistent lower file

This patch sets up and destroys the persistent lower file for each eCryptfs
inode.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: replace encrypt, decrypt, and inode size write

Replace page encryption and decryption routines and inode size write routine
with versions that utilize the read_write.c functions.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: read_write.c routines

Add a set of functions through which all I/O to lower files is consolidated.
This patch adds a new inode_info reference to a persistent lower file for each
eCryptfs inode; another patch later in this series will set that up.  This
persistent lower file is what the read_write.c functions use to call
vfs_read() and vfs_write() on the lower filesystem, so even when reads and
writes come in through aops->readpage and aops->writepage, we can satisfy them
without resorting to direct access to the lower inode's address space.
Several function declarations are going to be changing with this patchset.
For now, in order to keep from breaking the build, I am putting dummy
parameters in for those functions.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ecryptfs: fix error handling

The error paths and the module exit code need work. sysfs
unregistration is not the right place to tear down the crypto
subsystem, and the code to undo subsystem initializations on various
error paths is unnecessarily duplicated. This patch addresses those
issues.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: remove assignments in if-statements

Remove assignments in if-statements.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: remove header_extent_size

There is no point to keeping a separate header_extent_size and an extent_size.
 The total size of the header can always be represented as some multiple of
the regular data extent size.

[randy.dunlap@oracle.com: ecryptfs: fix printk format warning]
Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: Use generic_file_splice_read()

eCryptfs is currently just passing through splice reads to the lower
filesystem.  This is obviously incorrect behavior; the decrypted data is
what needs to be read, not the lower encrypted data.  I cannot think of any
good reason for eCryptfs to implement splice_read, so this patch points the
eCryptfs fops splice_read to use generic_file_splice_read.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Reviewed-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: make needlessly global symbols static

Andrew Morton wrote:
> Please check that all the newly-added global symbols do indeed need
> to be global.

Change symbols in keystore.c and crypto.o to static if they do not
need to be global.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: remove unnecessary variable initializations

Andrew Morton wrote:
> >       struct mutex *tfm_mutex = NULL;
>
> This initialisation looks like it's here to kill bogus gcc warning
> (if it is, it should have been commented).  Please investigate
> uninitialized_var() and __maybe_unused sometime.

Remove some unnecessary variable initializations. There may be a few
more such intializations remaining in the code base; a future patch
will take care of those.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: kerneldoc fixes for crypto.c and keystore.c

Andrew Morton wrote:
From: mhalcrow@us.ibm.com <mhalcrow@halcrow.austin.ibm.com>
> > +/**
> > + * decrypt_passphrase_encrypted_session_key - Decrypt the session key
> > + * with the given auth_tok.
> >   *
> >   * Returns Zero on success; non-zero error otherwise.
> >   */
>
> That comment purports to be a kerneldoc-style comment.  But
>
> - kerneldoc doesn't support multiple lines on the introductory line
>   which identifies the name of the function (alas).  So you'll need to
>   overflow 80 cols here.
>
> - the function args weren't documented
>
> But the return value is!  People regularly forget to do that.  And
> they frequently forget to document the locking prerequisites and the
> permissible calling contexts (process/might_sleep/hardirq, etc)
>
> (please check all ecryptfs kerneldoc for this stuff sometime)

This patch cleans up some of the existing comments and makes a couple
of line break tweaks. There is more work to do to bring eCryptfs into
full kerneldoc-compliance.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: comments for some structs

Andrew Morton wrote:
> > +struct ecryptfs_global_auth_tok {
> > +#define ECRYPTFS_AUTH_TOK_INVALID 0x00000001
> > +     u32 flags;
> > +     struct list_head mount_crypt_stat_list;
> > +     struct key *global_auth_tok_key;
> > +     struct ecryptfs_auth_tok *global_auth_tok;
> > +     unsigned char sig[ECRYPTFS_SIG_SIZE_HEX + 1];
> > +};
> > +
> > +struct ecryptfs_key_tfm {
> > +     struct crypto_blkcipher *key_tfm;
> > +     size_t key_size;
> > +     struct mutex key_tfm_mutex;
> > +     struct list_head key_tfm_list;
> > +     unsigned char cipher_name[ECRYPTFS_MAX_CIPHER_NAME_SIZE + 1];
> > +};
>
> Please consider commenting your struct fields carefully: it's a
> great way to help other to understand your code.

Add some comments to the ecryptfs_global_auth_tok and ecryptfs_key_tfm
structs to make their functions more easily ascertained.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: grammatical fix (destruct to destroy)

Andrew Morton wrote:
> > +int ecryptfs_destruct_crypto(void)
>
> ecryptfs_destroy_crypto would be more grammatically correct ;)

Grammatical fix for some function names.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: collapse flag set into one statement

Andrew Morton wrote:
> > +     crypt_stat->flags |= ECRYPTFS_ENCRYPTED;
> > +     crypt_stat->flags |= ECRYPTFS_KEY_VALID;
>
> Maybe the compiler can optimise those two statements, but we'd
> normally provide it with some manual help.

This patch provides the compiler with some manual help for
optimizing the setting of some flags.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: remove unnecessary BUG_ON

Andrew Morton wrote:
> > +     mutex_lock(&mount_crypt_stat->global_auth_tok_list_mutex);
> > +     BUG_ON(mount_crypt_stat->num_global_auth_toks == 0);
> > +     mutex_unlock(&mount_crypt_stat->global_auth_tok_list_mutex);
>
> That's odd-looking.  If it was a bug for num_global_auth_toks to be
> zero, and if that mutex protects num_global_auth_toks then as soon
> as the lock gets dropped, another thread can make
> num_global_auth_toks zero, hence the bug is present.  Perhaps?

That was serving as an internal sanity check that should not have made
it into the final patch set in the first place. This patch removes it.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ecryptfs: printk warning fixes

fs/ecryptfs/keystore.c: In function 'parse_tag_1_packet':
fs/ecryptfs/keystore.c:557: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
fs/ecryptfs/keystore.c: In function 'parse_tag_3_packet':
fs/ecryptfs/keystore.c:690: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
fs/ecryptfs/keystore.c: In function 'parse_tag_11_packet':
fs/ecryptfs/keystore.c:836: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
fs/ecryptfs/keystore.c: In function 'write_tag_1_packet':
fs/ecryptfs/keystore.c:1413: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
fs/ecryptfs/keystore.c:1413: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
fs/ecryptfs/keystore.c: In function 'write_tag_11_packet':
fs/ecryptfs/keystore.c:1472: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
fs/ecryptfs/keystore.c: In function 'write_tag_3_packet':
fs/ecryptfs/keystore.c:1663: warning: format '%d' expects type 'int', but argument 2 has type 'size_t'
fs/ecryptfs/keystore.c:1663: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int'
fs/ecryptfs/keystore.c: In function 'ecryptfs_generate_key_packet_set':
fs/ecryptfs/keystore.c:1778: warning: passing argument 2 of 'write_tag_11_packet' from incompatible pointer type
fs/ecryptfs/main.c: In function 'ecryptfs_parse_options':
fs/ecryptfs/main.c:363: warning: format '%d' expects type 'int', but argument 3 has type 'size_t'

Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: update comment and debug statement

Trivial updates to comment and debug statement.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: fix Tag 11 writing code

Fix up the Tag 11 writing code to handle size limits and boundaries more
explicitly.  It looks like the packet length was 1 shorter than it should have
been, chopping off the last byte of the key identifier.  This is largely
inconsequential, since it is not much more likely that a key identifier
collision will occur with 7 bytes rather than 8.  This patch fixes the packet
to use the full number of bytes that were originally intended to be used for
the key identifier.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: fix Tag 11 parsing code

Fix up the Tag 11 parsing code to handle size limits and boundaries more
explicitly.  Pay attention to *8* bytes for the key identifier (literal data),
no more, no less.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: fix Tag 3 parsing code

Fix up the Tag 3 parsing code to handle size limits and boundaries more
explicitly.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: fix Tag 1 parsing code

Fix up the Tag 1 parsing code to handle size limits and boundaries more
explicitly.  Initialize the new auth_tok's flags.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Josef Sipek <jsipek@fsl.cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: kmem_cache objects for multiple keys; init/exit functions

Introduce kmem_cache objects for handling multiple keys per inode.  Add calls
in the module init and exit code to call the key list
initialization/destruction functions.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: use list_for_each_entry_safe() when wiping auth toks

Use list_for_each_entry_safe() when wiping the authentication token list.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: add key list structure; search keyring

Add support structures for handling multiple keys.  The list in crypt_stat
contains the key identifiers for all of the keys that should be used for
encrypting each file's File Encryption Key (FEK).  For now, each inode
inherits this list from the mount-wide crypt_stat struct, via the
ecryptfs_copy_mount_wide_sigs_to_inode_sigs() function.

This patch also removes the global key tfm from the mount-wide crypt_stat
struct, instead keeping a list of tfm's meant for dealing with the various
inode FEK's.  eCryptfs will now search the user's keyring for FEK's parsed
from the existing file metadata, so the user can make keys available at any
time before or after mounting.

Now that multiple FEK packets can be written to the file metadata, we need to
be more meticulous about size limits.  The updates to the code for writing out
packets to the file metadata makes sizes and limits more explicit, uniformly
expressed, and (hopefully) easier to follow.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/nfsd/export.c: make 3 functions static

This patch makes the following needlessly global functions static:
- exp_get_by_name()
- exp_parent()
- exp_find()

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Neil Brown <neilb@suse.de>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

isdn: guard against a potential NULL pointer dereference in old_capi_manufacturer()

In drivers/isdn/capi/kcapi.c::old_capi_manufacturer(), if the call to
get_capi_ctr_by_nr(ldef.contr); in line 823 returns NULL, then we'll be
dereferencing a NULL pointer in the very next line.

(Found by Coverity checker as bug #402)

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix possible NULL deref on low memory condition in capidrv.c::send_message()

If we fail to allocate an skb in
drivers/isdn/capi/capidrv.c::send_message(), then we'll end up
dereferencing a NULL pointer.
Since out of memory conditions are not unheard of, I believe it
is better to print a error message and just return rather than
bring down the whole kernel.
Sure, doing this may upset some application, but that's still
better than crashing the whole system.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

use mutex instead of semaphore in isdn subsystem common functions

The ISDN subsystem common functions use a semaphore as mutex. Use the
mutex API instead of the (binary) semaphore.

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gigaset: remove pointless locking

Remove pointless taking of spinlock around reading a single pointer-sized
or smaller variable.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kprobes: support kretprobe blacklist

Introduce architecture dependent kretprobe blacklists to prohibit users
from inserting return probes on the function in which kprobes can be
inserted but kretprobes can not.

This patch also removes "__kprobes" mark from "__switch_to" on x86_64 and
registers "__switch_to" to the blacklist on x86-64, because that mark is to
prohibit user from inserting only kretprobe.

Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Prasanna S Panchamukhi <prasanna@in.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

spi doesn't need class_device

Make the SPI framework and drivers stop using class_device.  Update docs
accordingly ...  highlighting just which sysfs paths should be
"safe"/stable.

Signed-off-by: Tony Jones <tonyj@suse.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/spi/spidev_test.c: constify some variables

Constify two char pointers and a struct in Documentation/spi/spidev_test.c.

Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

spi_mpc83xx handles other processors with QUICC engine

Currently, all QE SPI controllers are almost the same comparing to
MPC83xx's, thus let's use that driver for them.

Tested to work on MPC85xx in loopback mode.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SPI driver runtime footprint shrinkage

Shrink the runtime footprint of various SPI drivers:

  - Move the probe() routine into the init section where practical,
    using platform_driver_probe() to make that safe.  This often saves
    around 1KB.  Using platform_driver_probe() can also be a correctness
    fix, if the probe routine is already marked __init but the driver
    struct keeps a dangling pointer to it after init section removal.

  - Likewise move remove() routines into the exit sections.

These changes would be inappropriate iff the platform devices were
actually hotpluggable (e.g. they're found on optional addon cards,
or in an FPGA that's dynamically reprogrammed).  In these cases,
that's not the situation; it's an SOC controller and the only device
is initialized before these drivers.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

OMAP2 McSPI code cleanup

Remove unused variable & write space

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Clean up duplicate includes in drivers/spi/

This patch cleans up duplicate includes in
drivers/spi/

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cpuset: remove sched domain hooks from cpusets

Remove the cpuset hooks that defined sched domains depending on the setting
of the 'cpu_exclusive' flag.

The cpu_exclusive flag can only be set on a child if it is set on the
parent.

This made that flag painfully unsuitable for use as a flag defining a
partitioning of a system.

It was entirely unobvious to a cpuset user what partitioning of sched
domains they would be causing when they set that one cpu_exclusive bit on
one cpuset, because it depended on what CPUs were in the remainder of that
cpusets siblings and child cpusets, after subtracting out other
cpu_exclusive cpusets.

Furthermore, there was no way on production systems to query the
result.

Using the cpu_exclusive flag for this was simply wrong from the get go.

Fortunately, it was sufficiently borked that so far as I know, almost no
successful use has been made of this.  One real time group did use it to
affectively isolate CPUs from any load balancing efforts.  They are willing
to adapt to alternative mechanisms for this, such as someway to manipulate
the list of isolated CPUs on a running system.  They can do without this
present cpu_exclusive based mechanism while we develop an alternative.

There is a real risk, to the best of my understanding, of users
accidentally setting up a partitioned scheduler domains, inhibiting desired
load balancing across all their CPUs, due to the nonobvious (from the
cpuset perspective) side affects of the cpu_exclusive flag.

Furthermore, since there was no way on a running system to see what one was
doing with sched domains, this change will be invisible to any using code.
Unless they have real insight to the scheduler load balancing choices, they
will be unable to detect that this change has been made in the kernel's
behaviour.

Initial discussion on lkml of this patch has generated much comment.  My
(probably controversial) take on that discussion is that it has reached a
rough concensus that the current cpuset cpu_exclusive mechanism for
defining sched domains is borked.  There is no concensus on the
replacement.  But since we can remove this mechanism, and since its
continued presence risks causing unwanted partitioning of the schedulers
load balancing, we should remove it while we can, as we proceed to work the
replacement scheduler domain mechanisms.

Signed-off-by: Paul Jackson <pj@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: Dinakar Guniguntala <dino@in.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I/OAT: Add DCA services

Add code to connect to the DCA driver and provide cpu tags for use by
drivers that would like to use Direct Cache Access hints.

    [Adrian Bunk]                Several Kconfig cleanup items
    [Andrew Morten, Chris Leech] Fix for using cpu_physical_id() even when
         built for uni-processor

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

DCA: Add Direct Cache Access driver

Direct Cache Access (DCA) is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.  This
patch adds a manager and interface for matching up client requests for DCA
services with devices that offer DCA services.

In order to use DCA, a module must do bus writes with the appropriate tag
bits set to trigger a cache read for a specific CPU.  However, different
CPUs and chipsets can require different sets of tag bits, and the methods
for determining the correct bits may be simple hardcoding or may be a
hardware specific magic incantation.  This interface is a way for DCA
clients to find the correct tag bits for the targeted CPU without needing
to know the specifics.

    [Dave Miller] use DEFINE_SPINLOCK()

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I/OAT: Add support for MSI and MSI-X

Add support for MSI and MSI-X interrupt handling, including the ability
to choose the desired interrupt method.

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
[bunk@kernel.org: drivers/dma/ioat_dma.c: make 3 functions static]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I/OAT: Split PCI startup from DMA handling code

Split the general PCI startup from the DMA handling code in order to
prepare for adding support for DCA services and future versions of the
ioatdma device.

    [Rusty Russell] Removal of __unsafe() usage.

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I/OAT: code cleanup from checkpatch output

Take care of a bunch of little code nits in ioatdma files

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I/OAT: Rename the source file

Rename the ioatdma.c file in preparation for splitting into multiple files,
which will allow for easier adding new functionality.

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I/OAT: New device ids

Add device ids for new revs of the Intel I/OAT DMA engine

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

V850: cleanup struct irqaction initializers

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Miles Bader <miles@gnu.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: definitively kill subprocesses on panic

In a stock 2.6.22.6 kernel, poweroff a user mode linux guest (2.6.22.6 running
in skas0 mode) will halt the host linux.  I think the reason is the kernel
thread abort because of a bug.  Then the sys_reboot in process of user mode
linux guest is not trapped by the user mode linux kernel and is executed by
host.  I think it is better to make sure all of our children process to quit
when user mode linux kernel abort.

[ jdike - the kernel process needs to ignore SIGTERM, plus the waitpid/kill
loop is needed to make sure that all of our children are dead before the
kernel exits ]

Signed-off-by: Lepton Wu <ytht.net@gmail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: arch/um/drivers formatting

Style fixes for the rest of the drivers.  arch/um/drivers should be pretty
CodingStyle-compliant now.

Except for the ubd driver, which will have to be treated separately.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: fix stub address calculations

The calculation of CONFIG_STUB_CODE and CONFIG_STUB_DATA didn't take into
account anything but 3G/1G and 2G/2G, leaving the other vmsplits out in the
cold.

I'd rather not duplicate the four known host vmsplit cases for each of these
symbols.  I'd also like to calculate them based on the highest userspace
address.

The Kconfig language seems not to allow calculation of hex constants, so I
moved this to as-layout.h.  CONFIG_STUB_CODE, CONFIG_STUB_DATA, and
CONFIG_STUB_START are now gone.  In their place are STUB_CODE, STUB_DATA, and
STUB_START in as-layout.h.

i386 and x86_64 seem to differ as to whether an unadorned constant is an int
or a long, so I cast them to unsigned long so they can be printed
consistently.  However, they are also used in stub.S, where C types don't work
so well.  So, there are ASM_ versions of these constants for use in stub.S.  I
also ifdef-ed the non-asm-friendly portion of as-layout.h.

With this in place, most of the rest of this patch is changing CONFIG_STUB_*
to STUB_*, except in stub.S, where they are changed to ASM_STUB_*.

defconfig has the old symbols deleted.

I also print these addresses out in case there is any problem mapping them on
the host.

The two stub.S files had some trailing whitespace, so that is cleaned up here.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: correctly handle skb allocation failures

Handle memory allocation failures when reading packets.

We have to read something from the host, even if we can't allocate any
memory.  If we don't, the host side of the device may fill up and stop
delivering interrupts because no new packets can be queued.

A single sk_buff is allocated whenever an MTU is seen which is larger
than any seen earlier.  This is used to read packets if there is a
memory allocation failure.

The large MTU check is done from eth_configure, which is called when a
interface is added to the system.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: network driver MTU cleanups

A bunch of MTU-related cleanups in the network code.

First, there is the addition of the notion of a maximally-sized packet, which
is the MTU plus headers.  This is used to size the skb that will receive a
packet.  This allows ether_adjust_skb to go away, as it was used to resize the
skb after it was allocated.

Since the skb passed into the low-level read routine is no longer resized, and
possibly reallocated, there, they (and the write routines) don't need to get
an sk_buff **.  They just need the sk_buff * now.  The callers of
ether_adjust_skb still need to do the skb_put, so that's now inlined.

The MAX_PACKET definitions in most of the drivers are gone.

The set_mtu methods were all the same and did nothing, so they can be
removed.

The ethertap driver had a typo which doubled the size of the packet rather
than adding two bytes to it.  It also wasn't defining its setup_size, causing
a zero-byte kmalloc and crash when the invalid pointer returned from kmalloc
was dereferenced.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: network formatting

Style and other non-functional changes in the UML networking code, including
include tidying
style violations
copyright updates
printks getting severities
userspace code calling libc directly rather than using the os_*
wrappers

There's also a exit path cleanup in the pcap driver.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: use *SEC_PER_*SEC constants

There are various uses of powers of 1000, plus the odd BILLION constant in the
time code.  However, there are perfectly good definitions of *SEC_PER_*SEC in
linux/time.h which can be used instaed.

These are replaced directly in kernel code.  Userspace code imports those
constants as UM_*SEC_PER_*SEC and uses these.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: eliminate SIGALRM

Now that ITIMER_REAL is no longer used, there is no need for any use of
SIGALRM whatsoever.  This patch removes all mention of it.

In addition, real_alarm_handler took a signal argument which is now always
SIGVTALRM.  So, that is gone.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: time build fix

Put back an implementation of timeval_to_ns in arch/um/os-Linux/time.c.
tglx pointed out in his review of tickless support that there was a
perfectly good implementation of it in linux/time.h.  The problem is that
this is userspace code which can't pull in kernel headers and there doesn't
seem to be a libc version.

So, I'm copying the version from linux/time.h rather than resurrecting my
version.  This causes some declaration changes as it now returns a signed
value rather than an unsigned value.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: eliminate interrupts in the idle loop

Now, the idle loop now longer needs SIGALRM firing - it can just sleep for the
requisite amount of time and fake a timer interrupt when it finishes.

Any use of ITIMER_REAL now goes away.  disable_timer only turns off
ITIMER_VIRTUAL.  switch_timers is no longer needed, so it, and all calls, goes
away.

disable_timer now returns the amount of time remaining on the timer.
default_idle uses this to tell idle_sleep how long to sleep.  idle_sleep will
call alarm_handler if nanosleep returns 0, which is the case if it didn't
return early due to an interrupt.  Otherwise, it just returns.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: tickless support

Enable tickless support.

CONFIG_TICK_ONESHOT and CONFIG_NO_HZ are enabled.

itimer_clockevent gets CLOCK_EVT_FEAT_ONESHOT and an implementation of
.set_next_event.

CONFIG_UML_REAL_TIME_CLOCK goes away because it only makes sense when there is
a clock ticking away all the time.  timer_handler now just calls do_IRQ once
without trying to figure out how many ticks to emulate.

The idle loop now needs to turn ticking on and off.

Userspace ticks keep happening as usual.  However, the userspace loop keep
track of when the next wakeup should happen and suppresses process ticks until
that happens.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: clocksource support

Add clocksource support.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: GENERIC_CLOCKEVENTS support

Enable CONFIG_GENERIC_CLOCKEVENTS.

timer_irq gets its name changed to timer_handler, and becomes the recipient of
timer signals.

The clock_event_device is set up to imitate the current ticking clock, i.e.
CLOCK_EVT_FEAT_ONESHOT is not enabled yet.

disable_timer now doesn't ignore SIGALRM and SIGVTALRM because that breaks
delay calibration.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: GENERIC_TIME support

Enable CONFIG_GENERIC_TIME.

As a side-effect of this, the UML implementations of do_gettimeofday and
do_settimeofday go away, as these are provided by generic code.  set_time also
goes away since it was only used by do_settimeofday.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: separate timer initialization

Move timer signal initialization from init_irq_signals to a new function,
timer_init.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: simplify interval setting

set_interval took a timer type as an argument, but it always specified a
virtual timer.  So, it is not needed, and it is gone, and set_interval is
simplified appropriately.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: fix timer switching

Fix up the switching between virtual and real timers.  The idle loop sleeps,
so the timer at that point must be real time.  At all other times, the timer
must be virtual.  Even when userspace is running, and the kernel is asleep,
the virtual timer is correct because the process timer will be running and the
process timer will be firing.

The timer switch used to be in the context switch and timer handler code.
This is moved to the idle loop and the signal handler, making it much more
clear why it is happening.

switch_timers now returns the old timer type so that it may be restored.  The
signal handler uses this in order to restore the previous timer type when it
returns.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: eliminate hz()

Eliminate hz() since its only purpose was to provide a kernel-space constant
to userspace code.  This can be done instead by providing the constant
directly through kernel_constants.h.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: more idiomatic parameter parsing

Make mconsole parameter parsing slightly more idiomatic.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: remove unused file

arch/um/os-Linux/tt.c is no longer used.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: remove unneeded void * cast

vmalloc() returns a void pointer, so casting to (void *) is pretty pointless.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: eliminate floating point state from register file

The floating point fields in the pt_regs register file aren't used, so they
are deleted.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: style fixes in FP code

Tidy the code affected by the floating point fixes.

A bunch of unused stuff is gone, including two sigcontext.c files,
which turned out to be entirely unneeded.

There are the usual fixes -
whitespace and style cleanups
copyright updates
emacs formatting comments gone
include cleanups
adding severities to printks

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: sysrq and mconsole fixes

Fix the passing of printk output back to the mconsole client.  The existing
code was somewhat confused, accumulating output in a buffer, but writing it
out entirely whenever a new chunk was added.  This is fixed.

The earlier include cleanups caused linux/sysrq.h to not be included - this is
fixed by adding the include back, under CONFIG_MAGIC_SYSRQ.

CONFIG_MAGIC_SYSRQ is also defaulted to on in defconfig.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: coredumping floating point fixes

Fix core dumping of floating point state.  ELF_CORE_COPY_FPREGS gets a
definitions, and as a result, dump_fpu no longer needs to exist.  Also,
elf_fpregset_t needed a real definition.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: ptrace floating point fixes

Handle floating point state better in ptrace.  The code now correctly
distinguishes between PTRACE_[GS]ETFPREGS and PTRACE_[GS]ETFPXREGS.  The FPX
requests get handed off to arch-specific code because that's not generic.

get_fpregs, set_fpregs, set_fpregs, and set_fpxregs needed real
implementations.

Something here exposed a missing include in asm/page.h, which needed
linux/types.h in order to get gfp_t, so that's fixed here.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: floating point signal delivery fixes

Handle floating point state in across signals correctly.  UML/i386 needs to
know whether the host does PTRACE_[GS]ETFPXREGS, so an arch_init_registers
hook is added, which on x86_64 does nothing.

UML doesn't save and restore floating point registers on kernel entry and
exit, so they need to be copied between the host process and the sigcontext.
save_fpx_registers and restore_fpx_registers are added for this purpose.
save_fp_registers and restore_fp_registers already exist.

There was a bunch of floating point state conversion code in
arch/um/sys-i386/ptrace.c which isn't needed there, but is needed in signal.c,
so it is moved over.

The i386 code now distinguishes between fp and fpx state and handles them
correctly.  The x86_64 code just needs to copy state as-is between the host
process and the stack.  There are also some fixes there to pass the correct
address of the floating point state around.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: don't use glibc asm/user.h

Stop including asm/user.h from libc - it seems to be disappearing from
distros.  It's replaced with sys/user.h which defines user_fpregs_struct and
user_fpxregs_struct instead of user_i387_struct and struct user_fxsr_struct on
i386.

As a bonus, on x86_64, I get to dump some stupid typedefs which were needed in
order to get asm/user.h to compile.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: fix hostfs style

Style fixes in hostfs.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: remove unneeded if from hostfs

Get rid of an empty if statement which might look like a bug to a
casual reader.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: clean up tlb flush path

Tidy the tlb flushing code.

With tt mode gone, there is no reason to have the capability to have
called directly from do_mmap, do_mprotect, and do_munmap, rather than
calling a function pointer that it is given.

There was a large amount of data that was passed from function to
function, being used at the lowest level, without being changed.  This
stuff is now encapsulated in a structure which is initialized at the
top layer and passed down.  This simplifies the code, reduces the
amount of code needed to pass the parameters around, and saves on
stack space.

A somewhat more subtle change is the meaning of the current operation
index.  It used to start at -1, being pre-incremented when adding an
operation.  It now starts at 0, being post-incremented, with
associated adjustments of +/- 1 on comparisons.

In addition, tlb.h contained a couple of declarations which had no
users outside of tlb.c, so they could be moved or deleted.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: userspace files should call libc directly

A number of files that were changed in the recent removal of tt mode
are userspace files which call the os_* wrappers instead of calling
libc directly.  A few other files were affected by this, through

This patch makes these call glibc directly.

There are also style fixes in the affected areas.

os_print_error has no remaining callers, so it is deleted.

There is a interface change to os_set_exec_close, eliminating a
parameter which was always the same.  The callers are fixed as well.

os_process_pc got its error path cleaned up.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: fix inlines

"extern inline" will have different semantics with gcc 4.3.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: replace clone with fork

Convert the boot-time host ptrace testing from clone to fork.  They were
essentially doing fork anyway.  This cleans up the code a bit, and makes
valgrind a bit happier about grinding it.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>