Mauro Carvalho Chehab [Fri, 4 Feb 2011 13:42:09 +0000 (10:42 -0300)]
[media] tuner-core: Better implement standby mode
In the past, T_STANDBY were used on devices with a separate radio tuner to
mark a tuner that were disabled. With the time, it got newer meanings.
Also, due to a bug at the logic, the driver might incorrectly return
T_STANDBY to userspace.
So, instead of keeping the abuse, just use a boolean for storing
such information.
We can't remove T_STANDBY yet, as this is used on two other drivers. A
latter patch will address its usage outside tuner-core.
Thanks-to: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 4 Feb 2011 13:09:07 +0000 (10:09 -0300)]
[media] tuner-core: Some cleanups at check_mode/set_mode
Properly document those functions and do some cleanups around that.
There's just one behavior change on this patchset: it will now restore
TV frequency when changing from radio to TV mode.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 4 Feb 2011 02:32:07 +0000 (23:32 -0300)]
[media] tuner-core: Reorganize the functions internally
This is a big patch with no functional changes. It just
rearranges everything inside the driver, and prepares to
break TV and Radio into two separate fops groups.
Currently, it has an heuristics logic to determine if the
call came from radio or video. However, the caller driver
knows for sure, so tuner-core shouldn't try to guess it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 4 Feb 2011 02:03:19 +0000 (23:03 -0300)]
[media] tuner-core: move some messages to the proper place
Move the frequency set debug printk's to the code that actually
are changing it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 4 Feb 2011 01:18:14 +0000 (22:18 -0300)]
[media] tuner-core: remove the legacy is_stereo() call
Nobody is using this legacy call. Just remove it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 4 Feb 2011 01:05:23 +0000 (22:05 -0300)]
[media] tuner-core: Remove V4L1/V4L2 API switch
V4L1 was removed. So, the code there is just dead code.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 14 Feb 2011 10:01:51 +0000 (07:01 -0300)]
[media] cx88: Don't allow opening a device while it is not ready
After registering the cdev, it would be possible do have an open on it.
In a matter of fact, some versions of udev do this. So, move registration
to the end and protect it with a mutex.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 14 Feb 2011 00:52:02 +0000 (21:52 -0300)]
[media] cx88: use unlocked_ioctl for cx88-video.
cx88-video has locks. don't use the locked ioctl version, as
it is not needed.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 1 Feb 2011 01:18:21 +0000 (22:18 -0300)]
[media] cx231xx: Add support for PV Xcapture USB
Adds support for Pixelviex Xcapture USB grabber device.
This device has one composite and one s-video entry
only, plus a button.
For now, the button is not supported.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 31 Jan 2011 19:25:39 +0000 (16:25 -0300)]
[media] cx231xx: Allow some boards to not use I2C port 3
Some devices don't need to use it. So allow to just disable this logic.
Having it enabled on some devices cause power management to complain,
generating error -71.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 1 Feb 2011 01:12:15 +0000 (22:12 -0300)]
[media] cx231xx: Use parameters to describe some board variants
Instead of per-model tests all over the code, use some parameters
at the board entries to describe the model variants for:
- devices with 417 MPEG encoder;
- devices that use external AV;
- devices where vbi VANC endpoint doesn't work;
- devices with xc5000 that require different IF
initialization (and probably will cover also
xc3028).
- devices with xceive tuner that require a reset
during init.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 30 Jan 2011 12:03:24 +0000 (09:03 -0300)]
[media] cx231xx: Use a generic check for TUNER_XC5000
The check for xc5000 assumes that the tuner will always
be using the same bus and will have the same address.
As those are configurable via dev->board, it should use,
instead, the values defined there.
Also, a similar type of test will be needed by other
tuners (for example, for TUNER_XC2028)
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 30 Jan 2011 01:10:56 +0000 (22:10 -0300)]
[media] cx231xx: Simplify interface checking logic at probe
Just a cleanup patch. Removes one indent level by moving
the return -ENODEV to happen before the device register
logic, if the interface is not the audio/video (int 1).
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Alina Friedrichsen [Sun, 23 Jan 2011 15:27:05 +0000 (12:27 -0300)]
[media] tuner-xc2028: More firmware loading retries
My Hauppauge WinTV HVR-1400 needs sometimes more then only one retry to load the firmware successfully.
Signed-off-by: Alina Friedrichsen <x-alina@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
iceberg [Fri, 21 Jan 2011 18:00:25 +0000 (15:00 -0300)]
[media] double mutex lock in drivers/media/radio/si470x/radio-si470x-
KERNEL_VERSION: 2.6.37
common.c in function ssize_t si470x_fops_read.
1. First mutex_lock on &radio->lock in line 441
2. Second in line 462
I think that mutex in line 462 is not needed.
433static ssize_t si470x_fops_read(struct file *file, char __user *buf,
434 size_t count, loff_t *ppos)
435{
....
441 mutex_lock(&radio->lock);
442 if ((radio->registers[SYSCONFIG1] & SYSCONFIG1_RDS) == 0)
443 si470x_rds_on(radio);
444
445 /* block if no new data available */
446 while (radio->wr_index == radio->rd_index) {
447 if (file->f_flags & O_NONBLOCK) {
448 retval = -EWOULDBLOCK;
449 goto done;
450 }
451 if (wait_event_interruptible(radio->read_queue,
452 radio->wr_index != radio->rd_index) < 0) {
453 retval = -EINTR;
454 goto done;
455 }
456 }
457
458 /* calculate block count from byte count */
459 count /= 3;
460
461 /* copy RDS block out of internal buffer and to user buffer */
462 mutex_lock(&radio->lock);
Found by Linux Device Drivers Verification Project
Remove second mutex.
Signed-off-by: Alexander Strakh <strakh@ispras.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dmitri Belimov [Thu, 20 Jan 2011 06:05:08 +0000 (03:05 -0300)]
[media] tm6000: add/rework reg.defines
Rework registers defines. Add TM6000 specific registers defines.
Add marks and comments for TM6010 specific registers.
Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 22 Jan 2011 09:36:02 +0000 (06:36 -0300)]
[media] cpia2: convert to video_ioctl2
Unable to test this due to lack of hardware.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 22 Jan 2011 09:34:55 +0000 (06:34 -0300)]
[media] pwc: convert to video_ioctl2
Tested with a Logitech QuickCam Pro 4000.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Thu, 13 Jan 2011 08:05:36 +0000 (05:05 -0300)]
[media] pwc: convert to core-assisted locking
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Tue, 11 Jan 2011 20:32:28 +0000 (17:32 -0300)]
[media] vivi: fix compiler warning
drivers/media/video/vivi.c:1059: warning: this decimal constant is unsigned only in ISO C90
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 23 Jan 2011 14:33:16 +0000 (12:33 -0200)]
[media] vivi: convert to the control framework and add test controls
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 12 Dec 2010 11:46:15 +0000 (08:46 -0300)]
[media] tvp7002: use control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 12 Dec 2010 11:45:59 +0000 (08:45 -0300)]
[media] vpx3220: use control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 12 Dec 2010 11:45:43 +0000 (08:45 -0300)]
[media] tvp5150: use the control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 12 Dec 2010 11:45:22 +0000 (08:45 -0300)]
[media] tvp514x: use the control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 12 Dec 2010 11:45:04 +0000 (08:45 -0300)]
[media] tlv320aic23b: use control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 12 Dec 2010 11:27:48 +0000 (08:27 -0300)]
[media] saa7110: use control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 12 Dec 2010 11:19:41 +0000 (08:19 -0300)]
[media] bt819: use control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 12 Dec 2010 11:19:16 +0000 (08:19 -0300)]
[media] adv7343: use control framework
Also fixed a memory leak in the probe function if an error occurred.
The gain control range was also fixed (a proper range from -64 to 64).
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 31 Dec 2010 13:22:52 +0000 (10:22 -0300)]
[media] cx18: Use the control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 12 Dec 2010 10:53:28 +0000 (07:53 -0300)]
[media] cs5345: use the control framework
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 10 Nov 2010 00:31:40 +0000 (22:31 -0200)]
[media] technisat-usb2: CodingStyle cleanups
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 19 Jan 2011 18:25:17 +0000 (16:25 -0200)]
[media] add support for Encore FM3
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 19 Jan 2011 18:11:58 +0000 (16:11 -0200)]
[media] saa7134: Properly report when a board doesn't have eeprom
When a device is not detected, the driver prints a warning message.
That's ok, except for the fact that, even on newer devices that have
eeprom but aren't yet supported, it prints a message saying that the
device doesn't have eeprom.
Fix it by having a separate message for devices with eeprom, but not
yet known by the driver.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 19 Jan 2011 18:05:30 +0000 (16:05 -0200)]
[media] tuner-simple: add support for Tena TNF5337 MFD
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 16 Jan 2011 20:21:02 +0000 (17:21 -0300)]
[media] DocBook/v4l: fix validation errors
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pawel Osciak [Wed, 19 Jan 2011 15:02:29 +0000 (13:02 -0200)]
[media] v4l: vivi: port to videobuf2
Make vivi use videobuf2 in place of videobuf.
Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 18 Jan 2011 00:18:02 +0000 (22:18 -0200)]
[media] ngene: Fix compilation when cxd2099 is not enabled
drivers/media/dvb/ngene/ngene-i2c.o: In function `cxd2099_attach':
ngene-i2c.c:(.text+0x195): multiple definition of `cxd2099_attach'
drivers/media/dvb/ngene/ngene-core.o:ngene-core.c:(.text+0x100): first defined here
drivers/media/dvb/ngene/ngene-cards.o: In function `cxd2099_attach':
ngene-cards.c:(.text+0x116): multiple definition of `cxd2099_attach'
drivers/media/dvb/ngene/ngene-core.o:ngene-core.c:(.text+0x100): first defined here
drivers/media/dvb/ngene/ngene-dvb.o: In function `cxd2099_attach':
ngene-dvb.c:(.text+0x7ad): multiple definition of `cxd2099_attach'
drivers/media/dvb/ngene/ngene-core.o:ngene-core.c:(.text+0x100): first defined here
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 17 Jan 2011 16:20:49 +0000 (14:20 -0200)]
[media] Move CI cxd2099 driver to staging
This driver is abusing the kernel<=>userspace API, due to the lack of a
proper solution for it. A discussion were done at:
http://www.mail-archive.com/linux-media@vger.kernel.org/msg22196.html
But there's not a solution for it yet. So, move the driver to staging, while
we don't have a final solution.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Endriss [Mon, 10 Jan 2011 09:36:24 +0000 (06:36 -0300)]
[media] stv090x: 22kHz workaround must also be performed for the 2nd frontend
22kHz workaround must also be performed for the 2nd frontend.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Endriss [Mon, 10 Jan 2011 09:36:23 +0000 (06:36 -0300)]
[media] ngene: Improved channel initialisation and release
Refactored code for channel initialisation and release:
- Do not create device nodes which are not required.
- Better error handling.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Endriss [Mon, 10 Jan 2011 09:36:22 +0000 (06:36 -0300)]
[media] stv090x: Fix losing lock in dual DVB-S2 mode
Do not clear registers ACLC/BCLC in DVB-S2 mode for Cut <= 20.
Otherwise, the demod could lose the lock periodically.
Verified with cineS2 and Duoflex.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Endriss [Mon, 10 Jan 2011 09:36:21 +0000 (06:36 -0300)]
[media] stv090x: Fixed typos in register macros
Fixed typos in register macros.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Endriss [Mon, 10 Jan 2011 09:36:20 +0000 (06:36 -0300)]
[media] ngene: Fix copy-paste error
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Endriss [Mon, 10 Jan 2011 09:36:19 +0000 (06:36 -0300)]
[media] get_dvb_firmware: ngene_18.fw added
Add download link for ngene firmware rev 18.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Endriss [Mon, 10 Jan 2011 09:36:18 +0000 (06:36 -0300)]
[media] ngene: Enable CI for Mystique SaTiX-S2 Dual (v2)
Enable CI for Mystique SaTiX-S2 Dual (v2).
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ralph Metzler [Mon, 10 Jan 2011 09:36:17 +0000 (06:36 -0300)]
[media] ngene: Add net device
Add dvb net device.
Note that the physical address must be setup manually.
Signed-off-by: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ralph Metzler [Mon, 10 Jan 2011 09:36:16 +0000 (06:36 -0300)]
[media] ngene: Shutdown workaround
Implement shutdown workaround for some chipsets.
Signed-off-by: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ralph Metzler [Mon, 10 Jan 2011 09:36:15 +0000 (06:36 -0300)]
[media] ngene: CXD2099AR Common Interface driver
Driver for the Common Interface Controller CXD2099AR.
Supports the CI of the cineS2 DVB-S2.
For now, data is passed through '/dev/dvb/adapterX/sec0':
- Encrypted data must be written to 'sec0'.
- Decrypted data can be read from 'sec0'.
- Setup the CAM using device 'ca0'.
Signed-off-by: Ralph Metzler <rjkm@metzlerbros.de>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Endriss [Mon, 10 Jan 2011 09:36:14 +0000 (06:36 -0300)]
[media] ngene: Clean-up driver initialisation (part 1)
If tuner initialisation failed, the frontend node was not removed.
When the frontend was opened, a kernel oops occurred...
This is the first step to improve error handling during initialisation.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Endriss [Mon, 10 Jan 2011 09:36:13 +0000 (06:36 -0300)]
[media] ngene: Support up to 4 tuners
Support up to 4 tuners for cineS2 v5, duoflex & mystique v2.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Endriss [Mon, 10 Jan 2011 09:36:12 +0000 (06:36 -0300)]
[media] ngene: Fixes for TS input over I2S
Fix TS input over I2S.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Endriss [Mon, 10 Jan 2011 09:36:11 +0000 (06:36 -0300)]
[media] ngene: Firmware 18 support
Small modifications for firmware 18.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Oliver Endriss [Mon, 10 Jan 2011 09:36:10 +0000 (06:36 -0300)]
[media] stv090x: Optional external lock routine
Card driver may supply its own lock routine now.
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andreas Regel [Mon, 10 Jan 2011 09:36:09 +0000 (06:36 -0300)]
[media] stv090x: make sleep/wakeup specific to the demod path
The STV0900 features two demodulator paths in one chip. Thus it is not
possible to use the generic power off function of the chip when sending
one of them to standby. The other path will stop working in that case.
The sleep function now switches off functionality specific to the demod
path. The global stuff is only switched off, when both paths are in
sleep mode. The wakeup function always turns on the global functionality
and then works specific to the path.
Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 16 Jan 2011 15:02:52 +0000 (13:02 -0200)]
[media] dib8000: Fix some wrong alignments
Something went wrong with the alignments for the if clause at line 2113.
Instead of using one tab for alignments, it used 3 tabs, plus one space
character.
WARNING: suspect code indent for conditional statements (8, 33)
+ if ((state->fe[0]->dtv_property_cache.delivery_system != SYS_ISDBT) ||
[...]
+ int i = 80000;
WARNING: suspect code indent for conditional statements (33, 41)
+ for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
+ dib8000_set_bandwidth(state->fe[index_frontend], fe->dtv_property_cache.bandwidth_hz / 1000);
WARNING: suspect code indent for conditional statements (33, 41)
+ do {
+ msleep(20);
WARNING: suspect code indent for conditional statements (41, 49)
+ for (index_frontend = 0; (index_frontend < MAX_NUMBER_OF_FRONTENDS) && (state->fe[index_frontend] != NULL); index_frontend++) {
+ if (((tune_failed >> index_frontend) & 0x1) == 0) {
WARNING: suspect code indent for conditional statements (49, 57)
+ if (((tune_failed >> index_frontend) & 0x1) == 0) {
+ found = dib8000_autosearch_irq(state->fe[index_frontend]);
WARNING: suspect code indent for conditional statements (41, 49)
+ if ((nbr_pending == 0) && (exit_condition == 0))
+ exit_condition = 1;
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sun, 16 Jan 2011 15:01:20 +0000 (13:01 -0200)]
[media] dib7000p: Fix 4-byte wrong alignments for some case statements
ERROR: switch and case should be at the same indent
switch (ch->u.ofdm.transmission_mode) {
[...]
+ case TRANSMISSION_MODE_4K:
WARNING: please, no spaces at the start of a line
+ case TRANSMISSION_MODE_4K:$
ERROR: switch and case should be at the same indent
switch (ch->u.ofdm.transmission_mode) {
[...]
+ case TRANSMISSION_MODE_4K:
WARNING: please, no spaces at the start of a line
+ case TRANSMISSION_MODE_4K:$
ERROR: switch and case should be at the same indent
switch (ch->u.ofdm.transmission_mode) {
[...]
+ case TRANSMISSION_MODE_4K:
WARNING: please, no spaces at the start of a line
+ case TRANSMISSION_MODE_4K:$
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Olivier Grenie [Tue, 4 Jan 2011 16:08:14 +0000 (13:08 -0300)]
[media] DiBxxxx: Codingstype updates
This patchs fix several conding-style violations.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Olivier Grenie [Tue, 4 Jan 2011 08:42:19 +0000 (05:42 -0300)]
[media] DiB0700: add support for several board-layouts
This patchs adds support for DiBcom's NIM8096MD, NIM9090M, NIM9090MD,
NIM7090, TFE7090PVR (no diversity) reference designs.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Olivier Grenie [Tue, 4 Jan 2011 07:54:31 +0000 (04:54 -0300)]
[media] DiB7090: add support for the dib7090 based
This patch adds support for the SoC DiB7090 DVB-T demodulator and its
melt-in UHF/VHF RF tuner.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Olivier Grenie [Tue, 4 Jan 2011 07:28:59 +0000 (04:28 -0300)]
[media] DIB9000: initial support added
This patchs add initial support for the DiB9000-device. This
demodulator is firmware-driven.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Olivier Grenie [Tue, 4 Jan 2011 07:27:11 +0000 (04:27 -0300)]
[media] DiB0090: misc improvements
This patch adds several performance improvements and prepares the
usage of firmware-based devices.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Olivier Grenie [Mon, 3 Jan 2011 18:39:35 +0000 (15:39 -0300)]
[media] DiBx000: add addition i2c-interface names
This patch adds the possibitity to use different I2C-ports to talk to
slave-devices than the standard ones.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Olivier Grenie [Mon, 3 Jan 2011 18:33:37 +0000 (15:33 -0300)]
[media] DiB8000: add diversity support
This patch adds a set a functions which allow the handling of multiple
demodulator in a diversity reception chain.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Olivier Grenie [Mon, 3 Jan 2011 18:30:14 +0000 (15:30 -0300)]
[media] DiB0700: add function to change I2C-speed
This commit adds a function to the DiB0700 USB driver which allows
drivers to change the I2C clock speed.
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki [Mon, 3 Jan 2011 11:07:30 +0000 (08:07 -0300)]
[media] Add v4l2 subdev driver for NOON010PC30L image sensor
Add I2C/V4L2 subdev driver for Siliconfile NOON010PC30 CIF camera.
The driver implements basic functionality, i.e. CIF/QCIF/QQCIF
resolution and color format selection, automatic/manual color
balance control. Other functions like cropping, rotation/flip,
exposure etc. can be easily implemented if needed.
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki [Tue, 30 Nov 2010 15:54:56 +0000 (12:54 -0300)]
[media] Add chip identity for NOON010PC30 camera sensor
Add ID for NOON010PC30 camera chip and reserve ID range for
Siliconfile sensors.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sungchun Kang [Thu, 30 Dec 2010 05:35:28 +0000 (02:35 -0300)]
[media] s5p-fimc: fimc_stop_capture bug fix
When is called fimc_stop_capture, it seems that wait_event_timeout
used improperly. It should be wake up by irq handler.
Reviewed-by Jonghun Han <jonghun.han@samsung.com>
Signed-off-by: Sungchun Kang <sungchun.kang@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hyunwoong Kim [Wed, 29 Dec 2010 10:08:32 +0000 (07:08 -0300)]
[media] s5p-fimc: fix MSCTRL.FIFO_CTRL for performance enhancement
This patch fixes the value of FIFO_CTRL in MSCTRL.
Main-scaler has the value to specify a basis FIFO control of input DMA.
The description of FIFO_CTRL has been changed as below.
0 = FIFO Empty (Next burst transaction is possible when FIFO is empty)
1 = FIFO Full (Next burst transaction is possible except Full FIFO)
Value '1' is recommended to enhance the FIMC operation performance.
Reviewed-by: Jonghun Han <jonghun.han@samsung.com>
Signed-off-by: Hyunwoong Kim <khw0178.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hyunwoong Kim [Wed, 29 Dec 2010 07:47:49 +0000 (04:47 -0300)]
[media] s5p-fimc: Support stop_streaming and job_abort
This patch adds callback functions, stop_streaming and job_abort,
to abort or finish any DMA in progress. stop_streaming is called
by videobuf2 framework and job_abort is called by m2m framework.
ST_M2M_PEND state is added to discard the next job.
Reviewed-by: Jonghun Han <jonghun.han@samsung.com>
Signed-off-by: Hyunwoong Kim <khw0178.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hyunwoong Kim [Wed, 29 Dec 2010 01:12:43 +0000 (22:12 -0300)]
[media] s5p-fimc: update checking scaling ratio range
Horizontal and vertical scaling range are according to the following equations.
If (SRC_Width >= 64 x DST_Width) { Exit(-1); /* Out of Horizontal scale range}
If (SRC_Height >= 64 x DST_Height) { Exit(-1); /* Out of Vertical scale range}
fimc_check_scaler_ratio() is used to check if horizontal and vertical
scale range are valid or not. To use fimc_check_scaler_ratio,
source and destination format should be set by VIDIOC_S_FMT.
And in case of scaling up, it doesn't have to check the scale range.
Reviewed-by: Jonghun Han <jonghun.han@samsung.com>
Signed-off-by: Hyunwoong Kim <khw0178.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki [Tue, 28 Dec 2010 14:37:55 +0000 (11:37 -0300)]
[media] s5p-fimc: Move scaler details handling to the register API file
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hyunwoong Kim [Tue, 28 Dec 2010 14:27:13 +0000 (11:27 -0300)]
[media] s5p-fimc: Configure scaler registers depending on FIMC version
The main scaler has four SFRs for main scaler ratio depending on FIMC version.
FIMC 4.x has only two SFRs and FIMC 5.x has four SFRs for main scaler.
Those are MainHorRatio, MainHorRatio_ext, MainVerRatio and MainverRatio_ext.
The FIMC 5.x has 15 bit resolution for scaling ratio as below.
{MainHorRatio,MainHorRatio_ext} = {[14:6],[5:0]}.
{MainVerRatio,MainVerRatio_ext} = {[14:6],[5:0]}.
MainHorRatio = CISCCTRL[24:16], MainHorRatio_ext = CIEXTEN[15:10]
MainVerRatio = CISCCTRL[8:0], MainVerRatio_ext = CIEXTEN[5:0]
This patch supports FIMC 4.x and FIMC 5.x using platform_device_id::driver_data.
Reviewed-by: Jonghun Han <jonghun.han@samsung.com>
Signed-off-by: Hyunwoong Kim <khw0178.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hyunwoong Kim [Wed, 22 Dec 2010 03:56:05 +0000 (00:56 -0300)]
[media] s5p-fimc: fix the value of YUV422 1-plane formats
Some color formats are mismatched in s5p-fimc driver.
CIOCTRL[1:0], order422_out, should be set 2b'00 not 2b'11
to use V4L2_PIX_FMT_YUYV. Because in V4L2 standard V4L2_PIX_FMT_YUYV means
"start + 0: Y'00 Cb00 Y'01 Cr00 Y'02 Cb01 Y'03 Cr01". According to datasheet
2b'00 is right value for V4L2_PIX_FMT_YUYV.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki [Mon, 27 Dec 2010 18:34:43 +0000 (15:34 -0300)]
[media] s5p-fimc: Add control of the external sensor clock
Manage the camera sensor clock in the host driver rather than
leaving this task for sensor drivers. The clock frequency
must be passed in the sensor's and host driver's platform data.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki [Mon, 27 Dec 2010 17:47:32 +0000 (14:47 -0300)]
[media] s5p-fimc: Enable simultaneous rotation and flipping
Map all (0, 90, 180, 270) deg counterclockwise rotation and
horizontal and vertical flip controls to (0, 90) deg rotation,
horizontal and vertical flip transformations available
in the device.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki [Wed, 8 Dec 2010 15:48:23 +0000 (12:48 -0300)]
[media] s5p-fimc: Use default input DMA burst count
Increase the input DMA "successive burst count" to default
value 4 to improve DMA performance. Minor cleanup.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki [Mon, 27 Dec 2010 18:05:58 +0000 (15:05 -0300)]
[media] s5p-fimc: Enable interworking without subdev s_stream
Prevent VIDIOC_STREAMON failing when s_stream callback is
not implemented by a sensor subdev driver.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki [Mon, 27 Dec 2010 18:02:16 +0000 (15:02 -0300)]
[media] s5p-fimc: Derive camera bus width from mediabus pixelcode
Remove bus_width from s5p_fimc_isp_info data structure.
Determine camera data bus width based on mediabus pixel format.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki [Mon, 27 Dec 2010 17:42:15 +0000 (14:42 -0300)]
[media] s5p-fimc: Rename s3c_fimc* to s5p_fimc*
Change s3c_fimc.h header file name to s5p_fimc.h, replace s3c_fimc_*
names with s5p_fimc_*. s3c_fimc need to be reserved for S3C series
and s5p-fimc driver will not cover CAMIF devices in S3C SoC series.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki [Wed, 1 Dec 2010 13:25:18 +0000 (10:25 -0300)]
[media] s5p-fimc: Use v4l core mutex in ioctl and file operations
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki [Wed, 8 Dec 2010 17:05:08 +0000 (14:05 -0300)]
[media] s5p-fimc: Conversion to multiplanar formats
Conversion to multiplanar color formats and minor cleanup.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki [Wed, 1 Dec 2010 13:14:59 +0000 (10:14 -0300)]
[media] s5p-fimc: Porting to videobuf 2
Porting to videobuf 2 and minor cleanup.
Separate videobuf_queue_ops are are created for m2m
and capture video nodes.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki [Sun, 9 Jan 2011 12:01:10 +0000 (09:01 -0300)]
[media] v4l: Add DocBook documentation for YU12M, NV12M image formats
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki [Tue, 28 Dec 2010 15:32:39 +0000 (12:32 -0300)]
[media] v4l: Add multiplanar format fourccs for s5p-fimc driver
Add definitions for format with color planes non-contiguous
in physical memory. These formats apply only if the V4L2 multiplane
extension is used.
V4L2_PIX_FMT_NV12M - 2-plane Y/CbCr
V4L2_PIX_FMT_NV12MT - 2-plane Y/CbCr tiled (64x32 pixel macroblocks)
V4L2_PIX_FMT_YUV420M - 3-plane Y/Cb/Cr
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Marek Szyprowski [Wed, 12 Jan 2011 09:50:55 +0000 (06:50 -0300)]
[media] v4l: mem2mem: port m2m_testdev to vb2
This patch ports mem2mem test device to videobuf2 framework.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Marek Szyprowski [Wed, 12 Jan 2011 09:50:24 +0000 (06:50 -0300)]
[media] v4l: mem2mem: port to videobuf2
Port memory-to-memory framework to videobuf2 framework.
Add support for multi-planar Video for Linux 2 API extensions to the
memory-to-memory driver framework.
Based on the original patch written by Pawel Osciak.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pawel Osciak [Fri, 7 Jan 2011 04:41:33 +0000 (01:41 -0300)]
[media] Add multi-planar API documentation
Add DocBook documentation for the new multi-planar API extensions to the
Video for Linux 2 API DocBook.
Signed-off-by: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pawel Osciak [Wed, 12 Jan 2011 08:57:26 +0000 (05:57 -0300)]
[media] Fix mmap() example in the V4L2 API DocBook
Correct ioctl return value handling and fix coding style issues.
[mchehab@redhat.com: return -1 is OK, according with ioctl manpages. Reverting ioctl changes]
Signed-off-by: Pawel Osciak <pawel@osciak.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 11 Jan 2011 20:12:34 +0000 (17:12 -0300)]
[media] vb2 core: Fix a few printk warnings
drivers/media/video/videobuf2-core.c: In function ‘__vb2_perform_fileio’:
drivers/media/video/videobuf2-core.c:1638: warning: format ‘%ld’ expects type ‘long int’, but argument 4 has type ‘size_t’
drivers/media/video/videobuf2-core.c:1697: warning: format ‘%ld’ expects type ‘long int’, but argument 2 has type ‘size_t’
drivers/media/video/videobuf2-core.c:1703: warning: format ‘%ld’ expects type ‘long int’, but argument 2 has type ‘size_t’
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Marek Szyprowski [Mon, 6 Dec 2010 08:56:55 +0000 (05:56 -0300)]
[media] v4l: videobuf2: add read() and write() emulator
Add a generic file io (read and write) emulator for videobuf2. It uses
MMAP memory type buffers and generic vb2 calls: req_bufs, qbuf and
dqbuf. Video date is being copied from mmap buffers to userspace with
standard copy_to_user() function. To add support for file io the driver
needs to provide an additional callback - read_setup or write_setup. It
should provide the default number of buffers used by emulator and flags.
With these flags one can detemine the style of read() or write()
emulation. By default 'streaming' style is used. With
VB2_FILEIO_READ_ONCE flag one can select 'one shot' mode for read()
emulator. With VB2_FILEIO_WRITE_IMMEDIATE flag one can select immediate
conversion of write calls to qbuf for write() emulator, so the vb2 will
not wait until each buffer is filled completely before queueing it to
the driver.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Andrzej Pietrasiewicz [Mon, 29 Nov 2010 14:53:34 +0000 (11:53 -0300)]
[media] v4l: videobuf2: add DMA scatter/gather allocator
Add an implementation of DMA scatter/gather allocator and handling
routines for videobuf2.
For mmap operation mode it is implemented on top of
alloc_page + sg_set_page/_free_page.
For userptr operation mode it is implemented on top of
get_user_pages + sg_set_page/put_page.
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pawel Osciak [Mon, 11 Oct 2010 13:59:36 +0000 (10:59 -0300)]
[media] v4l: videobuf2: add DMA coherent allocator
Add an implementation of DMA coherent memory allocator and handling
routines for videobuf2, implemented on top of dma_alloc_coherent() call.
Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pawel Osciak [Mon, 11 Oct 2010 13:58:53 +0000 (10:58 -0300)]
[media] v4l: videobuf2: add vmalloc allocator
Add an implementation of contiguous virtual memory allocator and handling
routines for videobuf2, implemented on top of vmalloc()/vfree() calls.
Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Marek Szyprowski [Thu, 9 Dec 2010 13:20:47 +0000 (10:20 -0300)]
[media] v4l: videobuf2: add generic memory handling routines
Add generic memory handling routines for userspace pointer handling,
contiguous memory verification and mapping.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pawel Osciak [Mon, 11 Oct 2010 13:56:41 +0000 (10:56 -0300)]
[media] v4l: add videobuf2 Video for Linux 2 driver framework
Videobuf2 is a Video for Linux 2 API-compatible driver framework for
multimedia devices. It acts as an intermediate layer between userspace
applications and device drivers. It also provides low-level, modular
memory management functions for drivers.
Videobuf2 eases driver development, reduces drivers' code size and aids in
proper and consistent implementation of V4L2 API in drivers.
Videobuf2 memory management backend is fully modular. This allows custom
memory management routines for devices and platforms with non-standard
memory management requirements to be plugged in, without changing the
high-level buffer management functions and API.
The framework provides:
- implementations of streaming I/O V4L2 ioctls and file operations
- high-level video buffer, video queue and state management functions
- video buffer memory allocation and management
Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pawel Osciak [Thu, 29 Jul 2010 17:56:47 +0000 (14:56 -0300)]
[media] v4l: Add compat functions for the multi-planar API
Add multi-planar ioctl handling to the 32bit compatibility layer.
[mchehab@redhat.com: Merged with a fixup patch from Pawel]
Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pawel Osciak [Thu, 23 Dec 2010 07:15:27 +0000 (04:15 -0300)]
[media] v4l: Add multi-planar ioctl handling code
Add multi-planar API core ioctl handling and conversion functions.
[mchehab@redhat.com: CondingStyle fixup]
Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Pawel Osciak [Thu, 29 Jul 2010 17:44:25 +0000 (14:44 -0300)]
[media] v4l: Add multi-planar API definitions to the V4L2 API
Multi-planar API is as a backwards-compatible extension of the V4L2 API,
which allows video buffers to consist of one or more planes. Planes are
separate memory buffers; each has its own mapping, backed by usually
separate physical memory buffers.
Many different uses for the multi-planar API are possible, examples
include:
- embedded devices requiring video components to be placed in physically
separate buffers, e.g. for Samsung S3C/S5P SoC series' video codec,
Y and interleaved Cb/Cr components reside in buffers in different
memory banks;
- applications may receive (or choose to store) video data of one video
buffer in separate memory buffers; such data would have to be temporarily
copied together into one buffer before passing it to a V4L2 device;
- applications or drivers may want to pass metadata related to a buffer and
it may not be possible to place it in the same buffer, together with video
data.
[mchehab@redhat.com: CodingStyle fixes]
Signed-off-by: Pawel Osciak <p.osciak@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Mon, 10 Jan 2011 23:42:12 +0000 (21:42 -0200)]
[media] technisat-usb2: Don't use a deprecated call
drivers/media/dvb/dvb-usb/technisat-usb2.c: In function ‘technisat_usb2_disconnect’:
drivers/media/dvb/dvb-usb/technisat-usb2.c:770: warning: ‘cancel_rearming_delayed_work’ is deprecated (declared at include/linux/workqueue.h:421)
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
projects / GitHub / LineageOS / android_kernel_motorola_exynos9610.git / log