psi:kernel:oom reaper porting into samsung platform

reaper can help to reclaim the memory in time, the knob will be set to true
when init parses the init.rc conf file.

Change-Id: I59f1173c0e46202904da6eeacb2fecc32c53232c

BACKPORT: kernel: cgroup: add poll file operation

Cgroup has a standardized poll/notification mechanism for waking all
pollers on all fds when a filesystem node changes.  To allow polling for
custom events, add a .poll callback that can override the Defenderault.

This is in preparation for pollable cgroup pressure files which have
per-fd trigger configurations.

Link: http://lkml.kernel.org/r/20190124211518.244221-3-surenb@google.com
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
(cherry picked from commit: dc50537bdd1a0804fa2cbc990565ee9a944e66fa)

Conflicts:
        include/linux/cgroup-Defenders.h
        kernel/cgroup.c

(1. replaced __poll_t with unsigned int)

Bug: 127712811
Test: lmkd in PSI mode
Change-Id: I21aff1d9d31e3d4b45e257aa4d299405a2ce6de3
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

FROMLIST: psi: introduce psi monitor

Psi monitor aims to provide a low-latency short-term pressure
detection mechanism configurable by users. It allows users to
monitor psi metrics growth and trigger events whenever a metric
raises above user-Defenderined threshold within user-Defenderined time window.

Time window and threshold are both expressed in usecs. Multiple psi
resources with different thresholds and window sizes can be monitored
concurrently.

Psi monitors activate when system enters stall state for the monitored
psi metric and deactivate upon exit from the stall state. While system
is in the stall state psi signal growth is monitored at a rate of 10 times
per tracking window. Min window size is 500ms, therefore the min monitoring
interval is 50ms. Max window size is 10s with monitoring interval of 1s.

When activated psi monitor stays active for at least the duration of one
tracking window to avoid repeated activations/deactivations when psi
signal is bouncing.

Notifications to the users are rate-limited to one per tracking window.

Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
(not upstream yet, latest version published at: https://lore.kernel.org/patchwork/patch/1052418/)

Conflicts:
        include/linux/psi.h
        kernel/cgroup/cgroup.c
        kernel/sched/psi.c

(1. replaced __poll_t with unsigned int
2. replaced EPOLLERR/EPOLLPRI with POLLERR/POLLPRI (values are the same)
3. include <linux/cgroup-Defenders.h> in include/linux/psi.h
4. include <uapi/linux/sched/types.h> in kernel/sched/psi.c)

Bug: 127712811
Bug: 129157727
Test: lmkd in PSI mode
Change-Id: I1688f047e98e1f109627dad72a33d2f70e575268
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

FROMLIST: refactor header includes to allow kthread.h inclusion in psi_types.h

kthread.h can't be included in psi_types.h because it creates a circular
inclusion with kthread.h eventually including psi_types.h and complaining
on kthread structures not being Defenderined because they are Defenderined further
in the kthread.h. Resolve this by removing psi_types.h inclusion from the
headers included from kthread.h.

Signed-off-by: Suren Baghdasaryan <surenb@google.com>
(not upstream yet, latest version published at: https://lore.kernel.org/patchwork/patch/1052417/)

Conflicts:
        include/linux/kthread.h
        kernel/kthread.c

(1. <linux/cgroup.h> include is already missing in kthread.h
2. <linux/cgroup.h> is already included in kthread.c)

Bug: 127712811
Bug: 129157727
Test: lmkd in PSI mode
Change-Id: I07c1f4fddf0c43b3095f505e062d9d179d041544
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

FROMLIST: psi: track changed states

Introduce changed_states parameter into collect_percpu_times to track
the states changed since the last update.

Signed-off-by: Suren Baghdasaryan <surenb@google.com>
(not upstream yet, latest version published at: https://lore.kernel.org/patchwork/patch/1052420/)

Bug: 127712811
Bug: 129157727
Test: lmkd in PSI mode
Change-Id: Idb2f7d73013bff16bb101b62a2609917a5353bf9
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

FROMLIST: psi: split update_stats into parts

Split update_stats into collect_percpu_times and update_averages for
collect_percpu_times to be reused later inside psi monitor.

Signed-off-by: Suren Baghdasaryan <surenb@google.com>
(not upstream yet, latest version published at: https://lore.kernel.org/patchwork/patch/1052419/)

Bug: 127712811
Bug: 129157727
Test: lmkd in PSI mode
Change-Id: Ic5dca1924a3f8997b49b5d16289f53bcc43b88fa
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

FROMLIST: psi: rename psi fields in preparation for psi trigger addition

Renaming psi_group structure member fields used for calculating psi totals
and averages for clear distinction between them and trigger-related fields
that will be added next.

Signed-off-by: Suren Baghdasaryan <surenb@google.com>
(not upstream yet, latest version published at: https://lore.kernel.org/patchwork/patch/1052416/)

Bug: 127712811
Bug: 129157727
Test: lmkd in PSI mode
Change-Id: I7aaadfc558950b54b02a051d63e508e8fe233b49
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

FROMLIST: psi: make psi_enable static

psi_enable is not used outside of psi.c, make it static.

Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
(not upstream yet, latest version published at: https://lore.kernel.org/patchwork/patch/1052415/)

Bug: 127712811
Bug: 129157727
Test: lmkd in PSI mode
Change-Id: I3c422d6c0c4299095c6ba05cfe942a2b00705f29
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

FROMLIST: psi: introduce state_mask to represent stalled psi states

The psi monitoring patches will need to determine the same states as
record_times().  To avoid calculating them twice, maintain a state mask
that can be consulted cheaply.  Do this in a separate patch to keep the
churn in the main feature patch at a minimum.

This adds 4-byte state_mask member into psi_group_cpu struct which results
in its first cacheline-aligned part becoming 52 bytes long.  Add explicit
values to enumeration element counters that affect psi_group_cpu struct
size.

Link: http://lkml.kernel.org/r/20190124211518.244221-4-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
(not upstream yet, latest version published at: https://lore.kernel.org/patchwork/patch/1052414/)

Bug: 127712811
Bug: 129157727
Test: lmkd in PSI mode
Change-Id: I7807b687e2a5d78aed44c5e33be1621aa11451cb
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

BACKPORT: fs: kernfs: add poll file operation

Patch series "psi: pressure stall monitors", v3.

Android is adopting psi to detect and remedy memory pressure that results
in stuttering and decreased responsiveness on mobile devices.

Psi gives us the stall information, but because we're dealing with
latencies in the millisecond range, periodically reading the pressure
files to detect stalls in a timely fashion is not feasible.  Psi also
doesn't aggregate its averages at a high enough frequency right now.

This patch series extends the psi interface such that users can configure
sensitive latency thresholds and use poll() and friends to be notified
when these are breached.

As high-frequency aggregation is costly, it implements an aggregation
method that is optimized for fast, short-interval averaGing, and makes the
aggregation frequency adaptive, such that high-frequency updates only
happen while monitored stall events are actively occurring.

With these patches applied, Android can monitor for, and ward off,
mounting memory shortages before they cause problems for the user.  For
example, using memory stall monitors in userspace low memory killer daemon
(lmkd) we can detect mounting pressure and kill less important processes
before device becomes visibly sluggish.  In our memory stress testing psi
memory monitors produce roughly 10x less false positives compared to
vmpressure signals.  Having ability to specify multiple triggers for the
same psi metric allows other parts of Android framework to monitor memory
state of the device and act accordingly.

The new interface is straightforward.  The user opens one of the pressure
files for writing and writes a trigger description into the file
descriptor that Defenderines the stall state - some or full, and the maximum
stall time over a given window of time.  E.g.:

        /* Signal when stall time exceeds 100ms of a 1s window */
        char trigger[] = "full 100000 1000000";
        fd = open("/proc/pressure/memory");
        write(fd, trigger, sizeof(trigger));
        while (poll() >= 0) {
                ...
        }
        close(fd);

When the monitored stall state is entered, psi adapts its aggregation
frequency according to what the configured time window requires in order
to emit event signals in a timely fashion.  Once the stalling subsides,
aggregation reverts back to normal.

The trigger is associated with the open file descriptor.  To stop
monitoring, the user only needs to close the file descriptor and the
trigger is discarded.

Patches 1-4 prepare the psi code for polling support.  Patch 5 implements
the adaptive polling logic, the pressure growth detection optimized for
short intervals, and hooks up write() and poll() on the pressure files.

The patches were developed in collaboration with Johannes Weiner.

This patch (of 5):

Kernfs has a standardized poll/notification mechanism for waking all
pollers on all fds when a filesystem node changes.  To allow polling for
custom events, add a .poll callback that can override the Defenderault.

This is in preparation for pollable cgroup pressure files which have
per-fd trigger configurations.

Link: http://lkml.kernel.org/r/20190124211518.244221-2-surenb@google.com
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
(cherry picked from commit: 147e1a97c4a0bdd43f55a582a9416bb9092563a9)

Conflicts:
        fs/kernfs/file.c
        include/linux/kernfs.h

1. replaced __poll_t with unsigned int.
2. replaced EPOLLERR/EPOLLPRI with POLLERR/POLLPRI (values are the same)

Bug: 127712811
Test: lmkd in PSI mode
Change-Id: Ic2bed334d05aec62f4e695f263893c3057921c55
Signed-off-by: Suren Baghdasaryan <surenb@go

UPSTREAM: psi: avoid divide-by-zero crash inside virtual machines

We've been seeing hard-to-trigger psi crashes when running inside VM
instances:

    divide error: 0000 [#1] SMP PTI
    Modules linked in: [...]
    CPU: 0 PID: 212 Comm: kworker/0:2 Not tainted 4.16.18-119_fbk9_3817_gfe944c98d695 #119
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
    Workqueue: events psi_clock
    RIP: 0010:psi_update_stats+0x270/0x490
    RSP: 0018:ffffc90001117e10 EFLAGS: 00010246
    RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff8800a35a13f8
    RDX: 0000000000000000 RSI: ffff8800a35a1340 RDI: 0000000000000000
    RBP: 0000000000000658 R08: ffff8800a35a1470 R09: 0000000000000000
    R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
    R13: 0000000000000000 R14: 0000000000000000 R15: 00000000000f8502
    FS:  0000000000000000(0000) GS:ffff88023fc00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 00007fbe370fa000 CR3: 00000000b1e3a000 CR4: 00000000000006f0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Call Trace:
     psi_clock+0x12/0x50
     process_one_work+0x1e0/0x390
     worker_thread+0x2b/0x3c0
     ? rescuer_thread+0x330/0x330
     kthread+0x113/0x130
     ? kthread_create_worker_on_cpu+0x40/0x40
     ? SyS_exit_group+0x10/0x10
     ret_from_fork+0x35/0x40
    Code: 48 0f 47 c7 48 01 c2 45 85 e4 48 89 16 0f 85 e6 00 00 00 4c 8b 49 10 4c 8b 51 08 49 69 d9 f2 07 00 00 48 6b c0 64 4c 8b 29 31 d2 <48> f7 f7 49 69 d5 8d 06 00 00 48 89 c5 4c 69 f0 00 98 0b 00 48

The Code-line points to `period` being 0 inside update_stats(), and we
divide by that when calculating that period's pressure percentage.

The elapsed period should never be 0.  The reason this can happen is due
to an off-by-one in the idle time / missing period calculation combined
with a coarse sched_clock() in the virtual machine.

The target time for aggregation is advanced into the future on a fixed
grid to prevent clock drift.  So when an aggregation runs after some idle
period, we can not just set it to "now + psi_period", but have to
calculate the downtime and advance the target time relative to itself.

However, if the aggregator was disabled exactly one psi_period (ns), we
drop one idle period in the calculation due to a > when we should do >=.
In that case, next_update will be advanced from 'now - psi_period' to
'now' when it should be moved to 'now + psi_period'.  The run finishes
with last_update == next_update == sched_clock().

With hardware clocks, this exact nanosecond match isn't likely in the
first place; but if it does happen, the clock will still have moved on and
the period non-zero by the time the worker runs.  A pointlessly short
period, but besides the extra work, no harm no foul.  However, a slow
sched_clock() like we have on VMs might not have advanced either by the
time the worker runs again.  And when we calculate the elapsed period, the
result, our pressure divisor, will be 0.  Ouch.

Fix this by correctly handling the situation when the elapsed time between
aggregation runs is precisely two periods, and advance the expiration
timestamp correctly to period into the future.

Link: http://lkml.kernel.org/r/20190214193157.15788-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Łukasz Siudut <lsiudut@fb.com
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 4e37504d1c49eec6434d0cc97278d2b51c9e8763)

Bug: 127712811
Test: lmkd in PSI mode
Change-Id: I40917c84354f9f32259c6703f00b6b1d21f45f02
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

UPSTREAM: psi: clarify the Kconfig text for the Defenderault-disable option

The current help text caused some confusion in online forums about
whether or not to Defenderault-enable or Defenderault-disable psi in vendor
kernels.  This is because it doesn't communicate the reason for why we
made this setting configurable in the first place: that the overhead is
non-zero in an artificial scheduler stress test.

Since this isn't representative of real workloads, and the effect was
not measurable in scheduler-heavy real world applications such as the
webservers and memcache installations at Facebook, it's fair to point
out that this is a pretty cautious option to select.

Link: http://lkml.kernel.org/r/20190129233617.16767-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 7b2489d37e1e355228f7c55724f77580e1dec22a)

Bug: 127712811
Test: lmkd in PSI mode
Change-Id: I5d0cb901562fd74c82d9d211544745b802776d8a
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

UPSTREAM: psi: fix aggregation idle shut-off

psi has provisions to shut off the periodic aggregation worker when
there is a period of no task activity - and thus no data that needs
aggregating.  However, while developing psi monitoring, Suren noticed
that the aggregation clock currently won't stay shut off for good.

DebugGing this revealed a flaw in the idle design: an aggregation run
will see no task activity and decide to go to sleep; shortly thereafter,
the kworker thread that executed the aggregation will go idle and cause
a scheduling change, during which the psi callback will kick the
!pending worker again.  This will ping-pong forever, and is equivalent
to having no shut-off logic at all (but with more code!)

Fix this by exempting aggregation workers from psi's clock waking logic
when the state change is them going to sleep.  To do this, tag workers
with the last work function they executed, and if in psi we see a worker
going to sleep after aggregating psi data, we will not reschedule the
aggregation work item.

What if the worker is also executing other items before or after?

Any psi state times that were incurred by work items preceding the
aggregation work will have been collected from the per-cpu buckets
during the aggregation itself.  If there are work items following the
aggregation work, the worker's last_func tag will be overwritten and the
aggregator will be kept alive to process this genuine new activity.

If the aggregation work is the last thing the worker does, and we decide
to go idle, the brief period of non-idle time incurred between the
aggregation run and the kworker's dequeue will be stranded in the
per-cpu buckets until the clock is woken by later activity.  But that
should not be a problem.  The buckets can hold 4s worth of time, and
future activity will wake the clock with a 2s delay, giving us 2s worth
of data we can leave behind when disabling aggregation.  If it takes a
worker more than two seconds to go idle after it finishes its last work
item, we likely have bigger problems in the system, and won't notice one
sample that was averaged with a bogus per-CPU weight.

Link: http://lkml.kernel.org/r/20190116193501.1910-1-hannes@cmpxchg.org
Fixes: eb414681d5a0 ("psi: pressure stall information for CPU, memory, and IO")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 1b69ac6b40ebd85eed73e4dbccde2a36961ab990)

Bug: 127712811
Test: lmkd in PSI mode
Change-Id: I2877fec3d381b1006b8bd1261895fdfd68bd21db
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

UPSTREAM: psi: fix reference to kernel commandline enable

The kernel commandline parameter named in CONFIG_PSI_DefenderAULT_DISABLED
help text contradicts the documentation in kernel-parameters.txt, and
the code.  Fix that.

Link: http://lkml.kernel.org/r/20181203213416.GA12627@cmpxchg.org
Fixes: e0c274472d ("psi: make disabling/enabling easier for vendor kernels")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 428a1cb4baeb9e5c7feda93af7372ba6d2491558)

Bug: 127712811
Test: lmkd in PSI mode
Change-Id: I592b66d6542f4fa7c2b6eb9f60a5dd43bcfbabf3
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

UPSTREAM: psi: make disabling/enabling easier for vendor kernels

Mel Gorman reports a hackbench regression with psi that would prohibit
shipping the suse kernel with it Defenderault-enabled, but he'd still like
users to be able to opt in at little to no cost to others.

With the current combination of CONFIG_PSI and the psi_disabled bool set
from the commandline, this is a challenge.  Do the following things to
make it easier:

1. Add a config option CONFIG_PSI_DefenderAULT_DISABLED that allows distros
   to enable CONFIG_PSI in their kernel but leave the feature disabled
   unless a user requests it at boot-time.

   To avoid double negatives, rename psi_disabled= to psi=.

2. Make psi_disabled a static branch to eliminate any branch costs
   when the feature is disabled.

In terms of numbers before and after this patch, Mel says:

: The following is a comparision using CONFIG_PSI=n as a baseline against
: your patch and a vanilla kernel
:
:                          4.20.0-rc4             4.20.0-rc4             4.20.0-rc4
:                 kconfigdisable-v1r1                vanilla        psidisable-v1r1
: Amean     1       1.3100 (   0.00%)      1.3923 (  -6.28%)      1.3427 (  -2.49%)
: Amean     3       3.8860 (   0.00%)      4.1230 *  -6.10%*      3.8860 (  -0.00%)
: Amean     5       6.8847 (   0.00%)      8.0390 * -16.77%*      6.7727 (   1.63%)
: Amean     7       9.9310 (   0.00%)     10.8367 *  -9.12%*      9.9910 (  -0.60%)
: Amean     12     16.6577 (   0.00%)     18.2363 *  -9.48%*     17.1083 (  -2.71%)
: Amean     18     26.5133 (   0.00%)     27.8833 *  -5.17%*     25.7663 (   2.82%)
: Amean     24     34.3003 (   0.00%)     34.6830 (  -1.12%)     32.0450 (   6.58%)
: Amean     30     40.0063 (   0.00%)     40.5800 (  -1.43%)     41.5087 (  -3.76%)
: Amean     32     40.1407 (   0.00%)     41.2273 (  -2.71%)     39.9417 (   0.50%)
:
: It's showing that the vanilla kernel takes a hit (as the bisection
: indicated it would) and that disabling PSI by Defenderault is reasonably
: close in terms of performance for this particular workload on this
: particular machine so;

Link: http://lkml.kernel.org/r/20181127165329.GA29728@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit e0c274472d5d27f277af722e017525e0b33784cd)

Bug: 127712811
Test: lmkd in PSI mode
Change-Id: I6cb666fa351e8901df82e4d6931bfec0c5ce230d
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

UPSTREAM: kernel/sched/psi.c: simplify cgroup_move_task()

The existing code triggered an invalid warning about 'rq' possibly being
used uninitialized.  Instead of doing the silly warning suppression by
initializa it to NULL, refactor the code to bail out early instead.

Warning was:

  kernel/sched/psi.c: In function `cgroup_move_task':
  kernel/sched/psi.c:639:13: warning: `rq' may be used uninitialized in this function [-Wmaybe-uninitialized]

Link: http://lkml.kernel.org/r/20181103183339.8669-1-olof@lixom.net
Fixes: 2ce7135adc9ad ("psi: cgroup support")
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 8fcb2312d1e3300e81aa871aad00d4c038cfc184)

Bug: 127712811
Test: lmkd in PSI mode
Change-Id: Id989da224a726082e0cfa5d5d9460bf63d448a93
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

BACKPORT: psi: cgroup support

On a system that executes multiple cgrouped jobs and independent
workloads, we don't just care about the health of the overall system, but
also that of individual jobs, so that we can ensure individual job health,
fairness between jobs, or prioritize some jobs over others.

This patch implements pressure stall tracking for cgroups.  In kernels
with CONFIG_PSI=y, cgroup2 groups will have cpu.pressure, memory.pressure,
and io.pressure files that track aggregate pressure stall times for only
the tasks inside the cgroup.

Link: http://lkml.kernel.org/r/20180828172258.3185-10-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Drake <drake@endlessm.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 2ce7135adc9ad081aa3c49744144376ac74fea60)

Conflicts:
        Documentation/cgroup-v2.txt
        include/linux/psi.h
        kernel/cgroup/cgroup.c

(1. manual merge from Documentation/admin-guide/cgroup-v2.rst
2. include <linux/cgroup-Defenders.h> into include/linux/psi.h
3. manual merge in css_free_work_fn to allow psi support only for cgroup v2
4. manual merge in cgroup_create to allow psi support only for cgroup v2)

Bug: 127712811
Test: lmkd in PSI mode
Change-Id: I163e6657aaa60aa5aab9372616a3bce2a65e90ec
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

UPSTREAM: psi: pressure stall information for CPU, memory, and IO

When systems are overcommitted and resources become contended, it's hard
to tell exactly the impact this has on workload productivity, or how close
the system is to lockups and OOM kills.  In particular, when machines work
multiple jobs concurrently, the impact of overcommit in terms of latency
and throughput on the individual job can be enormous.

In order to maximize hardware utilization without sacrificing individual
job health or risk complete machine lockups, this patch implements a way
to quantify resource pressure in the system.

A kernel built with CONFIG_PSI=y creates files in /proc/pressure/ that
expose the percentage of time the system is stalled on CPU, memory, or IO,
respectively.  Stall states are aggregate versions of the per-task delay
accounting delays:

       cpu: some tasks are runnable but not executing on a CPU
       memory: tasks are reclaiming, or waiting for swapin or thrashing cache
       io: tasks are waiting for io completions

These percentages of walltime can be thought of as pressure percentages,
and they give a general sense of system health and productivity loss
incurred by resource overcommit.  They can also indicate when the system
is approaching lockup scenarios and OOMs.

To do this, psi keeps track of the task states associated with each CPU
and samples the time they spend in stall states.  Every 2 seconds, the
samples are averaged across CPUs - weighted by the CPUs' non-idle time to
eliminate artifacts from unused CPUs - and translated into percentages of
walltime.  A running average of those percentages is maintained over 10s,
1m, and 5m periods (similar to the loadaverage).

[hannes@cmpxchg.org: doc fixlet, per Randy]
Link: http://lkml.kernel.org/r/20180828205625.GA14030@cmpxchg.org
[hannes@cmpxchg.org: code optimization]
Link: http://lkml.kernel.org/r/20180907175015.GA8479@cmpxchg.org
[hannes@cmpxchg.org: rename psi_clock() to psi_update_work(), per Peter]
Link: http://lkml.kernel.org/r/20180907145404.GB11088@cmpxchg.org
[hannes@cmpxchg.org: fix build]
Link: http://lkml.kernel.org/r/20180913014222.GA2370@cmpxchg.org
Link: http://lkml.kernel.org/r/20180828172258.3185-9-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Drake <drake@endlessm.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit eb414681d5a07d28d2ff90dc05f69ec6b232ebd2)

Bug: 127712811
Test: lmkd in PSI mode
Change-Id: Id00d23c977169b0c4636d92016fc1fee0274be05
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Conflicts:
kernel/sched/Makefile

UPSTREAM: sched: introduce this_rq_lock_irq()

do_sched_yield() disables IRQs, looks up this_rq() and locks it.  The next
patch is adding another site with the same pattern, so provide a
convenience function for it.

Link: http://lkml.kernel.org/r/20180828172258.3185-8-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Daniel Drake <drake@endlessm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 246b3b3342c9b0a2e24cda2178be87bc36e1c874)

Bug: 127712811
Test: lmkd in PSI mode
Change-Id: I24b42cff1624c80633f116b7cb485564f53a30a7
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

UPSTREAM: sched: sched.h: make rq locking and clock functions available in stats.h

kernel/sched/sched.h includes "stats.h" half-way through the file.  The
next patch introduces users of sched.h's rq locking functions and
update_rq_clock() in kernel/sched/stats.h.  Move those Defenderinitions up in
the file so they are available in stats.h.

Link: http://lkml.kernel.org/r/20180828172258.3185-7-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Daniel Drake <drake@endlessm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 1f351d7f7590857ea281579c26e6045b4c548ef4)

Bug: 127712811
Test: lmkd in PSI mode
Change-Id: Id342e0ba9a62b49e64f2ce8b87f883ea70230b2f
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

UPSTREAM: sched: loadavg: make calc_load_n() public

It's going to be used in a later patch. Keep the churn separate.

Link: http://lkml.kernel.org/r/20180828172258.3185-6-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Daniel Drake <drake@endlessm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 5c54f5b9edb1aa2eabbb1091c458f1b6776a1896)

Bug: 127712811
Test: lmkd in PSI mode
Change-Id: I50e0cb0dbf20ced329a484493f82ff69ca1ae97a
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

BACKPORT: sched: loadavg: consolidate LOAD_INT, LOAD_FRAC, CALC_LOAD

There are several Defenderinitions of those functions/macros in places that
mess with fixed-point load averages.  Provide an official version.

[akpm@linux-foundation.org: fix missed conversion in block/blk-iolatency.c]
Link: http://lkml.kernel.org/r/20180828172258.3185-5-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Daniel Drake <drake@endlessm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 8508cf3ffad4Defendera202b303e5b6379efc4cd9054)

Conflicts:
        block/blk-iolatency.c

(1. skipped changes in block/blk-iolatency.c as file does not exist in 4.14)

Bug: 127712811
Test: lmkd in PSI mode
Change-Id: Ifb7e12280b2aa4d379df29e24bbeab3e82a0bff8
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

UPSTREAM: delayacct: track delays from thrashing cache pages

Delay accounting already measures the time a task spends in direct reclaim
and waiting for swapin, but in low memory situations tasks spend can spend
a significant amount of their time waiting on thrashing page cache.  This
isn't tracked right now.

To know the full impact of memory contention on an individual task,
measure the delay when waiting for a recently evicted active cache page to
read back into memory.

Also update tools/accounting/getdelays.c:

     [hannes@computer accounting]$ sudo ./getdelays -d -p 1
     print delayacct stats ON
     PID     1

     CPU             count     real total  virtual total    delay total  delay average
                     50318      745000000      847346785      400533713          0.008ms
     IO              count    delay total  delay average
                       435      122601218              0ms
     SWAP            count    delay total  delay average
                         0              0              0ms
     RECLAIM         count    delay total  delay average
                         0              0              0ms
     THRASHING       count    delay total  delay average
                        19       12621439              0ms

Link: http://lkml.kernel.org/r/20180828172258.3185-4-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Drake <drake@endlessm.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit b1d29ba82cf2bc784f4c963ddd6a2cf29e229b33)

Bug: 127712811
Test: lmkd in PSI mode
Change-Id: I259f693987cf04e6a52ee7e8accf55a17e0de005
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

UPSTREAM: mm: workingset: tell cache transitions from workingset thrashing

Refaults happen during transitions between workingsets as well as in-place
thrashing.  Knowing the difference between the two has a range of
applications, including measuring the impact of memory shortage on the
system performance, as well as the ability to smarter balance pressure
between the filesystem cache and the swap-backed workingset.

During workingset transitions, inactive cache refaults and pushes out
established active cache.  When that active cache isn't stale, however,
and also ends up refaulting, that's bonafide thrashing.

Introduce a new page flag that tells on eviction whether the page has been
active or not in its lifetime.  This bit is then stored in the shadow
entry, to classify refaults as transitioning or thrashing.

How many page->flags does this leave us with on 32-bit?

20 bits are always page flags

21 if you have an MMU

23 with the zone bits for DMA, Normal, HighMem, Movable

29 with the sparsemem section bits

30 if PAE is enabled

31 with this patch.

So on 32-bit PAE, that leaves 1 bit for distinguishing two NUMA nodes.  If
that's not enough, the system can switch to discontigmem and re-gain the 6
or 7 sparsemem section bits.

Link: http://lkml.kernel.org/r/20180828172258.3185-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Drake <drake@endlessm.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 8508cf3ffad4Defendera202b303e5b6379efc4cd9054)

Bug: 127712811
Test: lmkd in PSI mode
Change-Id: I71df060dce5590a3c654f9a0e8e54deeb74b64c2
Signed-off-by: Suren Baghdasaryan <surenb@google.com>

mfd: cs47l35: Update codec reg value.

cirrus vendor patch:
When detected the reg value in the cache is inconsistent with
the value in the hardware, update the hardware reg.

Change-Id: I0aea0c59665f470a8625601ac3abbbd915f8dbee
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1452347
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Zhengming Yao <yaozm1@mt.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

wlbt: Driver changes for VTS Q Support for Auto Channel Selection

Auto Channel Selection driver changes for
"WPA_DRIVER_FLAGS_SUPPORT_HW_MODE_ANY"

SCSC-Bug-Id: HOST-10725
Moto-CRs-Fixed: (CR)

Change-Id: Ib53209068b432ae4c37914d9ee4a413816eebdd5
Signed-off-by: Abhishek Chaudhary <ab.chaudhary@samsung.com>
Reviewed-on: https://gerrit.mot.com/1452201
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key

[9610] usbpd Rp Defenderault to Contract.

Change-Id: I653309e3f33eefa61b202fc0c073941fd8ead9ec
Signed-off-by: Junhan Bae <junhan84.bae@samsung.com>

usb:Balance the enable/disable in secure mode

Enable/Disable shall be banlanced when USB in secure mode
Otherwise the linked_func and func_list could be messed up
That will cause the unbinding release the wild memory
This is a Samsung platform only issue,kernel panic
Has the following mark:

configfs-gadget gadget:unbind function 'mtp'
configfs-gadget gadget:unbind function 'ptp'

Which shall not happen, since user could not choose
Both mtp and ptp together

Change-Id: I4aba691a0c4180f828c55aad5d63b9162c3f881a
Signed-off-by: a17671 <a17671@motorola.com>
Reviewed-on: https://gerrit.mot.com/1451197
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

Revert "Revert "printk: add cpu info into kernel log""

Revert this change since we finally decided not to enable Samsung
CONFIG_PRINTK_PROCESS,
https://gerrit.mot.com/#/c/1435442/ had been abandoned

Change-Id: Ic60281e58b15656199666da976721340cd692dcd
Reviewed-on: https://gerrit.mot.com/1449799
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

fix build error

Change-Id: Icbe77ce94e1ac234eb13753750a8ac7a17c77103

input: update touch usb cable detect report function

as vendor patch, change the report function
in call back function

Change-Id: Id0063704802c0841e14cbd5fbd2dd75a8a71c28e
Signed-off-by: dengwei1 <dengwei1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1449028
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

UPSTREAM: xfrm: Make set-mark Defenderault behavior backward compatible

Fixes 9b42c1f, which changed the Defenderault route lookup behavior for
tunnel mode SAs in the outbound direction to use the skb mark, whereas
previously mark=0 was used if the output mark was unspecified. In
mark-based routing schemes such as Android’s, this change in Defenderault
behavior causes routing loops or lookup failures.

This patch restores the Defenderault behavior of using a 0 mark while still
incorporating the skb mark if the SET_MARK (and SET_MARK_MASK) is
specified.

Tested with additions to Android's kernel unit test suite:
https://android-review.googlesource.com/c/kernel/tests/+/860150

Fixes: 9b42c1f ("xfrm: Extend the output_mark to support input direction and masking")
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
(cherry picked from commit e2612cd496e7b465711d219ea6118893d7253f52)
Bug: 122236988
Test: Passes kernel tests
Change-Id: I1289b5b7b1eb93c6d99a0ba7d28e24c3eb25883d
Signed-off-by: Benedict Wong <benedictwong@google.com>

UPSTREAM: xfrm: fix ptr_ret.cocci warnings

net/xfrm/xfrm_interface.c:692:1-3: WARNING: PTR_ERR_OR_ZERO can be used

 Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Generated by: scripts/coccinelle/api/ptr_ret.cocci

Fixes: 44e2b838c24d ("xfrm: Return detailed errors from xfrmi_newlink")
CC: Benedict Wong <benedictwong@google.com>
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
(cherry picked from commit c6f5e017df9dfa9f6cbe70da008e7d716d726f1b)
Signed-off-by: Benedict Wong <benedictwong@google.com>
Bug: 113046120
Test: All kernel net-tests run, passing (20x repeated)
Change-Id: I4ec93c0427fded57ff5126dc7b3d97d9b5fd615b

UPSTREAM: xfrm: Return detailed errors from xfrmi_newlink

Currently all failure modes of xfrm interface creation return EEXIST.
This change improves the granularity of errnos provided by also
returning ENODEV or EINVAL if failures happen in looking up the
underlying interface, or a required parameter is not provided.

This change has been tested against the Android Kernel Networking Tests,
with additional xfrmi_newlink tests here:

https://android-review.googlesource.com/c/kernel/tests/+/715755

Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
(cherry picked from commit 44e2b838c24d883dae8496dc7b6ddac7956ba53c)
Bug: 113046120
Change-Id: Ic680bf1e4a828aaae01b289223d9396a551eefd2

UPSTREAM: xfrm: Remove xfrmi interface ID from flowi

In order to remove performance impact of having the extra u32 in every
single flowi, this change removes the flowi_xfrm struct, prefering to
take the if_id as a method parameter where needed.

In the inbound direction, if_id is only needed during the
__xfrm_check_policy() function, and the if_id can be determined at that
point based on the skb. As such, xfrmi_decode_session() is only called
with the skb in __xfrm_check_policy().

In the outbound direction, the only place where if_id is needed is the
xfrm_lookup() call in xfrmi_xmit2(). With this change, the if_id is
directly passed into the xfrm_lookup_with_ifid() call. All existing
callers can still call xfrm_lookup(), which uses a Defenderault if_id of 0.

This change does not change any behavior of XFRMIs except for improving
overall system performance via flowi size reduction.

This change has been tested against the Android Kernel Networking Tests:

https://android.googlesource.com/kernel/tests/+/master/net/test

Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
(cherry picked from commit bc56b33404599edc412b91933d74b36873e8ea25)
Bug: 113046120
Change-Id: Icd3a1ea08427b91c54a64318d9dbb9acfb5d429a

UPSTREAM: xfrm: Add virtual xfrm interfaces

This patch adds support for virtual xfrm interfaces.
Packets that are routed through such an interface
are guaranteed to be IPsec transformed or dropped.
It is a generic virtual interface that ensures IPsec
transformation, no need to know what happens behind
the interface. This means that we can tunnel IPv4 and
IPv6 through the same interface and support all xfrm
modes (tunnel, transport and beet) on it.

Co-developed-by: Lorenzo Colitti <lorenzo@google.com>
Co-developed-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Benedict Wong <benedictwong@google.com>
Tested-by: Antony Antony <antony@phenome.org>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
(cherry picked from commit f203b76d78092faf248db3f851840fbecf80b40e)
Bug: 113046120
Change-Id: I05e8fe1e8a8a4b01886504ce694ddda29e4fbec6

UPSTREAM: xfrm: Add a new lookup key to match xfrm interfaces.

This patch adds the xfrm interface id as a lookup key
for xfrm states and policies. With this we can assign
states and policies to virtual xfrm interfaces.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Acked-by: Benedict Wong <benedictwong@google.com>
Tested-by: Benedict Wong <benedictwong@google.com>
Tested-by: Antony Antony <antony@phenome.org>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
(cherry picked from commit 7e6526404adedf079279aa7aa11722deaca8fe2e)
Signed-off-by: Benedict Wong <benedictwong@google.com>
Bug: 113046120
Change-Id: I27d7757a374b0bd5f97c3e723773d6c7470a0717

UPSTREAM: flow: Extend flow informations with xfrm interface id.

Add a new flowi_xfrm structure with informations needed to do
a xfrm lookup. At the moment it keeps the informations about
the new xfrm interface id needed to lookup xfrm interfaces
that are introduced with a followup patch. We need this new
lookup key as other possible keys, like the ifindex is
already part of the xfrm selector and used as a key to
enforce the output device after the transformation in the
policy/state lookup.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Shannon Nelson <shannon.nelson@oracle.com>
Acked-by: Benedict Wong <benedictwong@google.com>
Tested-by: Benedict Wong <benedictwong@google.com>
Tested-by: Antony Antony <antony@phenome.org>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
(cherry picked from commit d159ce7957eec306eacda672e5909e26675ca8ef)
Signed-off-by: Benedict Wong <benedictwong@google.com>
Bug: 113046120
Change-Id: I70b520d3cf67cd663e84868b0e7cc45ffa74d080

UPSTREAM: xfrm: Extend the output_mark to support input direction and masking.

We already support setting an output mark at the xfrm_state,
unfortunately this does not support the input direction and
masking the marks that will be applied to the skb. This change
adds support applying a masked value in both directions.

The existing XFRMA_OUTPUT_MARK number is reused for this purpose
and as it is now bi-directional, it is renamed to XFRMA_SET_MARK.

An additional XFRMA_SET_MARK_MASK attribute is added for setting the
mask. If the attribute mask not provided, it is set to 0xffffffff,
keeping the XFRMA_OUTPUT_MARK existing 'full mask' semantics.

Co-developed-by: Tobias Brunner <tobias@strongswan.org>
Co-developed-by: Eyal Birger <eyal.birger@gmail.com>
Co-developed-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
(cherry picked from commit 9b42c1f179a614e11893ae4619f0304a38f481ae)
Signed-off-by: Benedict Wong <benedictwong@google.com>
Bug: 113046120
Change-Id: I582f0b460dc58f01e0c30afb6167725aa337d054

UPSTREAM: xfrm: fix XFRMA_OUTPUT_MARK policy entry

This seems to be an obvious typo, NLA_U32 is type of the attribute, not its
(minimal) length.

Fixes: 077fbac405bf ("net: xfrm: support setting an output mark.")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
(cherry picked from commit e719135881f00c01ca400abb8a5dadaf297a24f9)
Signed-off-by: Benedict Wong <benedictwong@google.com>
Bug: 113046120
Change-Id: I4c1a8de03febfa246b99c7eb67d77f74a1e3ba93

arm64/dts: Set detect headset button twice

arm/dts audio:
Set detect headset button twice to avoid err report.

Change-Id: I6d5ca6f72cfdc7459eb02489edeee432f57dae91
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1441697
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

wlbt: Initial Scan will be performed after STA Mac Randomisation.

Initial Scan will be performed after STA Mac Randomisation,
for facilitating faster reconnection to Saved Profiles.

SCSC-Bug-Id: PRI-11557
Moto-CRs-Fixed: (CR)

Change-Id: I8f308745ad4bdce0d04ad58f3042b5cb5a62812c
Signed-off-by: Mohit Ghuley <mohit.ghuley@samsung.com>
Signed-off-by: sunyue5 <sunyue5@motorola.com>
Reviewed-on: https://gerrit.mot.com/1441543
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key

usb:configfs:Set udc_name NULL if attach failed

If the probing of UDC controller failed
udc_name shall be NULL to avoid double unregistration
and the panic
It could happen in some corner case

Change-Id: I2e6e4168a505b86d8f1b57db53be91acc608ee97
Signed-off-by: a17671 <a17671@motorola.com>
Reviewed-on: https://gerrit.mot.com/1438349
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

Revert "(CR): wlbt: update pmu sequence"

This reverts commit 4e2e4c5090cd3fad1b24e1fb81e94c8b38867e53.

Change-Id: I062461db80799c48f9119606866b2668a12694fe
Reviewed-on: https://gerrit.mot.com/1437290
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key

wlbt: update pmu sequence

Change-Id: I161372cee02d25b312968d4c075acccab6ac23eb
Signed-off-by: Youngsoo <youngss.kim@samsung.com>
Signed-off-by: sunyue5 <sunyue5@motorola.com>
Reviewed-on: https://gerrit.mot.com/1436932
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key

Revert "printk: add cpu info into kernel log"

Change-Id: I20b58073db759906e2892e14373148a51e2aef99
Signed-off-by: sunyue5 <sunyue5@motorola.com>
Reviewed-on: https://gerrit.mot.com/1435441
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Zonghua Liu <a17671@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

kernel:optimize cdp thermal charGing limitation

Optimize cdp thermal
charGing limitation

Change-Id: I1ce95bd96e8f257ab103720609d93842840868d5
Signed-off-by: xuwei9 <xuwei9@mt.com>
Reviewed-on: https://gerrit.mot.com/1435344
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

fimc-is2: fix ITS scene0 test_read_write

update exposure metadata update timing to fix exposure
mismatch for raw and jpg case

Change-Id: I7bf61b8d89da819ce8974e2c7f887c3ed6ed2e3a
Signed-off-by: wangdw10 <wangdw10@mt.com>
Reviewed-on: https://gerrit.mot.com/1433855
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Biming Li <libm1@motorola.com>
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key

fimc-is2: disable fast AF trigger

make sure DDK and HAL use same frame to update AF status

Change-Id: Ia073d29846ecd2a86f1f70582e54e7d22b50b654
Signed-off-by: libm1 <libm1@mt.com>
Reviewed-on: https://gerrit.mot.com/1434209
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
Reviewed-by: Biming Li <libm1@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key

Support APEX on samsung platform

Change-Id: If15e3cc404b4f6cb6b582877a55aa5779cbac5e7
Signed-off-by: huangzq2 <huangzq2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1427696
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

Revert "ANDROID: dm verity: add minimum prefetch size"

This reverts commit ace74ccf82cfb2b73ce1df2e698d20c2fbc559dd.

Mot-CRs-fixed: (CR)

Bug: 71728490
Change-Id: Iebcb0cd9982f36c4bd2552811f9147325a291db0
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-on: https://gerrit.mot.com/1427695
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

UPSTREAM: loop: Add LOOP_SET_BLOCK_SIZE in compat ioctl

This change adds LOOP_SET_BLOCK_SIZE as one of the supported ioctls
in lo_compat_ioctl. It only takes an unsigned long argument, and
in practice a 32-bit value works fine.

Mot-CRs-fixed: (CR)

Bug: 117823094
Change-Id: I0061a082eb2632c47b7d66f35f2c909d33ff1653
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit 9fea4b395260175de4016b42982f45a3e6e03d0b)
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-on: https://gerrit.mot.com/1427694
Tested-by: Jira Key
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

Revert "proc: Convert proc_mount to use mount_ns."

This cleanup broke the parsing of procfs mount parameters.

Bug: 79705088
Mot-CRs-Fixed:(CR)

Signed-off-by: Alistair Strachan <astrachan@google.com>
Change-Id: If6159e6501a5f9a77dd2c4ff339d378ac271fdf4
Signed-off-by: a17671 <a17671@motorola.com>
Reviewed-on: https://gerrit.mot.com/1420288
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

UPSTREAM: zsmalloc: introduce zs_huge_class_size()

Patch series "zsmalloc/zram: drop zram's max_zpage_size", v3.

ZRAM's max_zpage_size is a bad thing.  It forces zsmalloc to store
normal objects as huge ones, which results in bigger zsmalloc memory
usage.  Drop it and use actual zsmalloc huge-class value when decide if
the object is huge or not.

This patch (of 2):

Not every object can be share its zspage with other objects, e.g.  when
the object is as big as zspage or nearly as big a zspage.  For such
objects zsmalloc has a so called huge class - every object which belongs
to huge class consumes the entire zspage (which consists of a physical
page).  On x86_64, PAGE_SHIFT 12 box, the first non-huge class size is
3264, so starting down from size 3264, objects can share page(-s) and
thus minimize memory wastage.

ZRAM, however, has its own statically Defenderined watermark for huge
objects, namely "3 * PAGE_SIZE / 4 = 3072", and forcibly stores every
object larger than this watermark (3072) as a PAGE_SIZE object, in other
words, to a huge class, while zsmalloc can keep some of those objects in
non-huge classes.  This results in increased memory consumption.

zsmalloc knows better if the object is huge or not.  Introduce
zs_huge_class_size() function which tells if the given object can be
stored in one of non-huge classes or not.  This will let us to drop
ZRAM's huge object watermark and fully rely on zsmalloc when we decide
if the object is huge.

[sergey.senozhatsky.work@gmail.com: add pool param to zs_huge_class_size()]
Link: http://lkml.kernel.org/r/20180314081833.1096-2-sergey.senozhatsky@gmail.com
Link: http://lkml.kernel.org/r/20180306070639.7389-2-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit 010b495e2fa32353d0ef6aa70a8169e5ef617a15)
Signed-off-by: Peter Kalauskas <peskal@google.com>
Bug: 113183619
Change-Id: I842d8234a53f30d2803139107f420f7217d6df6e
Reviewed-on: https://gerrit.mot.com/1416293
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Guolin Wang <wanggl3@mt.com>
Submit-Approved: Jira Key

Enable zram writeback

Porting zram changes from Google, and enable zram writeback

Change-Id: I1bcb545dd4cdeb7f456d2f609fdb43cd9a822816
Signed-off-by: huangzq2 <huangzq2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1416294
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Guolin Wang <wanggl3@mt.com>
Submit-Approved: Jira Key

config: Enable SCSC_WLAN_ABNORMAL_MULTICAST_PKT_FILTER

Drop pkts whose mac address are unicast and ip address
are multicast. It can optimize wifi power consumption.

Change-Id: I5fcb63783e76a4dae78b8305d6e0fc0a009c1aa7
Signed-off-by: sunyue5 <sunyue5@motorola.com>
Reviewed-on: https://gerrit.mot.com/1415107
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

Sensor: sx9325 malloc memory size err.

The parameter of sizeof is the structure pointer,
so the allocation size is 8,which leads memory crossing the boundary.

Change-Id: I04e19739b378a948e6ae681e45bcfdacc07ff16c
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1407951
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

oem:add oem partition into avb auth chain

create a node at device tree, the system can auto-mount the oem
partition according to the info in the tree node

Change-Id: I944804b129df5a68d8618cae898363229dfa0620
Reviewed-on: https://gerrit.mot.com/1407728
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

dts: add pm-ignore-notify on mmc

add pm-ignore-notify om mmc
picked up from ODM patch

Change-Id: Ia551e6dac0aac97a945d97dd49eba49427d0e071
Signed-off-by: dengwei1 <dengwei1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1404596
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

Troika : vibrator reset itself when IC hang

check with IC vendor
reset the IC when it hang

Change-Id: I5a169e10a3d9b544ab7b041bf9e2fcad9d672f5b
Signed-off-by: dengwei1 <dengwei1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1400750
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wei Xu <xuwei9@mt.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
(cherry picked from commit 4455d772f87642258340ba5d913a7b26c4820357)
Reviewed-on: https://gerrit.mot.com/1400777

Troika : vib fix stop delay time

discuss with vendor
Troika  vib fix stop delay time

Change-Id: I6ff5a56adf7990b90e0edabb97907a8cef25d812
Signed-off-by: dengwei1 <dengwei1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1397445
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wei Xu <xuwei9@mt.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

usb: configfs: skip unregister gadget in secure

There will be gadget driver unregister twice in USB secure
when try to set the UDC to none from userspace, which will cause
kernel panic in 4.9 kernel version, as there is a feature
about pending gadget driver list being added in this version.

As a solution, make sure gadget driver unregister or probe only
once over secure mode entry or usb configure from userspace.

Kernel BUG at ffffff8093067140 [verbose debug info unavailable]
Internal error: Accessing user space memory outside uaccess.h

Change-Id: I89f03afbf9716a95aae37e354cc0cb293b2ea090
Signed-off-by: a17671 <a17671@motorola.com>
Reviewed-on: https://gerrit.mot.com/1376192
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

usb: configfs: synchronize the secure and udc_name state

The gadget driver unregister/probe is not allowed to reentry
for the same udc.

As the conditions for gadget driver unregister/probe entry,
gadget secure and udc_name status should be synchronized.
Otherwise, in old implement code logic, there is still a chance
to fall into trouble of gadget driver unregister/probe reentry
for the same udc.

Change-Id: I6eb30a36eab84afd656f5bee9678e8d44933c6bc
Signed-off-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1287442
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1376191
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>

fix the f2fs mount failed issue in low memory case

On the RACK test, the SDcard often mount failed becuase of the
page allocation failure. After checked with f2fs owner, we can
use kvzmalloc to alloc non-continuous memory in case continuous
memory allocation failed.

Change-Id: Ifd83e8b9a6bff241ed851007a3b7aec49b413eb3
Signed-off-by: huangzq2 <huangzq2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1370212
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

cpufreq: enable CPU_FREQ_TIMES option

Change-Id: Id1c0b17b73ed1e4df9e0d098ecf48882daa38641
Signed-off-by: luodw1 <luodw1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1369617
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key

Kane: input pick up touch firmware update from vendor

input pick up touch firmware update
from himax vendor

Change-Id: Idacdf441db8edd83da5a56b68640691e27c6089e
Signed-off-by: dengwei1 <dengwei1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1378200
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key
(cherry picked from commit 2222e8b9b47550332c02bc0ac63e5159aaa16840)
Reviewed-on: https://gerrit.mot.com/1396950

kane: input update touch fw progress

update the touch fw progress
to make sure success

Change-Id: I4eb39e13ddc74d629fb8e184033a5873db28f57f
Signed-off-by: dengwei1 <dengwei1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1373092
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key
(cherry picked from commit f80727c7665bb31e5f78702db6c8a791c96b1091)
Reviewed-on: https://gerrit.mot.com/1396782

debug: add debug logs when keys has action

Change-Id: Ic880e8ab4199ca93019f38d3bbee2764f95a6c0b
Signed-off-by: luodw1 <luodw1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1391470
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

arm64:Defenderconfig: remove enforcing from cmdline

cmdline will be too long

Change-Id: Ib5c7d4c3c0546b518b4d7395f90e64b2e9b9783c
Signed-off-by: zhaoxp3 <zhaoxp3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1390660
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Submit-Approved: Jira Key

arm64/dts: Sensor: Modify Capsensor GPIO mode.

Modify CapSensor interrupt GPIO to pull-up mode,
Avoid virtual welding of pull-up resistance in factory.

Change-Id: Ib3943f7a9b47f16243b506c0561db4dfc377bcbc
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1388116
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

arm/dts: kane/Troika : disable KASAN feature

Change-Id: Ic98bb2a7ab952e38f3a2e9807bce29e732e8dfc7
Signed-off-by: wangdw10 <wangdw10@mt.com>
Reviewed-on: https://gerrit.mot.com/1384583
SME-Granted: SME Approvals Granted
Submit-Approved: Jira Key
Tested-by: Jira Key
SLTApproved: Slta Waiver
Reviewed-by: Dawei Wang <wangdw10@motorola.com>

[COMMON] fimc-is2: code sync for kane/Troika  Q upgrade

Change-Id: Ia3337813762117cfa811676e0de09ac3b1506942
Signed-off-by: wangdw10 <wangdw10@mt.com>
Reviewed-on: https://gerrit.mot.com/1384347
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Submit-Approved: Jira Key
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>

arm/dts: kane/Troika : add camera support for q upgrade

Change-Id: Ia17b1bb06aaf9d9bf47a4850000db7bf4c407e34
Signed-off-by: wangdw10 <wangdw10@mt.com>
Reviewed-on: https://gerrit.mot.com/1384346
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Submit-Approved: Jira Key
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>

ASoC: wm_adsp: Fix halo scratch register reading.

Halo register addresses increment by 8 instead of the usual 4. Read
sequential scratch registers accordingly.

MOT-CRs-fixed: (CR)
Signed-off-by: James Bodzay <jbodzay@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Change-Id: I88294fa44ba1748b5127824b708bbbf8122dcfc8
Reviewed-on: https://gerrit.mot.com/1383853
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Submit-Approved: Jira Key
Tested-by: Jira Key
Reviewed-by: Zhengming Yao <yaozm1@mt.com>

kane Q bringup

disable oem
sync Q Defenderconfig
battery pickup
Change-Id: I9200c2fa391a4beb46834524e6981deed095eb55
Signed-off-by: zhaoxp3 <zhaoxp3@motorola.com>

pass Q build

Change-Id: Id843bf48ae346e4951fbffe6986b5ba272c9a1f2

Q AndroidKernel.mk

Change-Id: Iae6ef8e8f881b7fc81f8f5234853bca867842a6e

Extcon: Fix mic high level of noise.

cirrus vendor patch:
Fix mic high level of noise Set MICD_RATE and
POLARITY_INV bit to 0 when a headset with mic is plugged in and set it in a
Defenderault state at removail.

Change-Id: I7ed17ef425cc3e9e0d03541996e9ea1427ee8013
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1362099
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Zhengming Yao <yaozm1@mt.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

arm64/dts: Trokia remove ext-cap config.

Due to hardware modification,external capacitor is removed,
so the relevant software config needs to be deleted.

Change-Id: Ifdc4d3b701ac0abec7a600cdb8ebaaa93b1c9fb1
Signed-off-by: Wen Xie <xiewen3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1362047
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Zhengming Yao <yaozm1@mt.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

[9610] fimc-is2: Buffer modification in case of otp data error at 5e9 module

CRs-fixed: (CR)

Change-Id: I45c71a809efb2cb65955977b0194a89e13771d0e
Signed-off-by: Dohyun Kim <dh5.kim@samsung.com>
Reviewed-on: https://gerrit.mot.com/1358072
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
Reviewed-by: Biming Li <libm1@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key

[9610] fimc-is2: fix accessing to out of boundary at otp checking seq in 5e9 module

CRs-fixed: (CR)

Change-Id: I3b2f4a3a9f07d19234091b5bae7abdfd6c87c3b8
Signed-off-by: Dohyun Kim <dh5.kim@samsung.com>
Reviewed-on: https://gerrit.mot.com/1358071
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
Reviewed-by: Biming Li <libm1@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key

Allow set single channel for ACS

Moto uses vendor.wifi.certchannel to set single channel
for ACS

Change-Id: I6990b132d972f4a0bc2d4901b0c9e38cd5956d84
Signed-off-by: sunyue5 <sunyue5@motorola.com>
Reviewed-on: https://gerrit.mot.com/1358073
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key

Using spinlock to protect  interrupt flag

Using spinlock to protect interrupt flag in critical section.

Change-Id: Ia9cf2ba638763bb1a87954deefe8a65083058439
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/1357136
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

Extcon:Don't report lineout device if mic detected

We see some case device with mic reported high
impedance, and reported as un-expected lineout.

Change-Id: Ic3b16a245b2ca411bcfe277f76ca86d3a680067f
Signed-off-by: yaozm1 <yaozm1@mt.com>
Reviewed-on: https://gerrit.mot.com/1355467
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

ext_config:Enable USB_RTL8152

Add support for RTL8152
For USB ethernet dongle

Change-Id: I9db4f572178a9115bbecc4bb0ee24fa8597a8483
Signed-off-by: a17671 <a17671@motorola.com>
Reviewed-on: https://gerrit.mot.com/1353791
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

ASoC: cs47l35: use dsp running flag for dsp status

instead of checking DSP memory address for DSP core status,
check the flag from wm_adsp to determine algorithm status.

Change-Id: I846afc671e708dedd9af52000a7eb76cc39adc3b
Signed-off-by: Yoon (Seungyoon) Lee <w22905@motorola.com>
Reviewed-on: https://gerrit.mot.com/1346616
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhengming Yao <yaozm1@mt.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

scsc: limit 2.4G ACS on channels 1~11

Samsung implemented 2.4G ACS among all region allowed
channels, while Moto requires 2.4G MHS should only be
setup on channels 1~11.

Change-Id: Ibecfc178488768ae3f03ba44519088c39094662a
Signed-off-by: sunyue5 <sunyue5@motorola.com>
Reviewed-on: https://gerrit.mot.com/1348019
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

fix rebase0430 build error

Change-Id: I6b34fce60010a43414ebef9351ae22faa512370d

dts:change charGing current at Troika

Change charGing current
at Troika

Change-Id: I875e778fdff4e8c306242bbb8815ceddd977de8c
Signed-off-by: xuwei9 <xuwei9@mt.com>
Reviewed-on: https://gerrit.mot.com/1346217
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

Troika : vib update voltage

per key part, the vib voltage need update
kane need not

Change-Id: I344768b4866a5cd00d393e0035116eef9aa17f84
Signed-off-by: dengwei1 <dengwei1@motorola.com>
Reviewed-on: https://gerrit.mot.com/1343790
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key

kernel:Troika  do not support turbo charger rate

Troika  do not support
turbo charger rate

Change-Id: I77671320b8b30c36285d7448d0f2bc21539477c0
Signed-off-by: xuwei9 <xuwei9@mt.com>
Reviewed-on: https://gerrit.mot.com/1342646
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

kernel:Troika  remove small charger

Troika  remove small
charger

Change-Id: Ib28693ebc3e6bfbd08c4917915a18b3d0ff0c3a7
Signed-off-by: xuwei9 <xuwei9@mt.com>
Reviewed-on: https://gerrit.mot.com/1342502
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

config:Troika  remove small charger

Remove small charger
at Troika

Change-Id: I66affccea04982c737db548b4d5f7131b1e010ca
Signed-off-by: xuwei9 <xuwei9@mt.com>
Reviewed-on: https://gerrit.mot.com/1342501
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

[COMMON] fimc-is2: do not use fast AF trigger when Precapture trigger

 PR JIRA ID: CPR-990

CRs-fixed: (CR)

Change-Id: Idb6311be87729c3e2119199e4047124a6733e9b8
Signed-off-by: Wooyeon Kim <wooy88.kim@samsung.com>
Reviewed-on: https://gerrit.mot.com/1342458
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Dawei Wang <wangdw10@motorola.com>
Reviewed-by: Biming Li <libm1@motorola.com>
Reviewed-by: Zhichao Chen <chenzc2@motorola.com>
Submit-Approved: Jira Key

kernel:Troika  battery profile update

Troika  battery profile update
for local buy battery

Change-Id: I13ad4fe4471814c79645eeeb6d3842814d2b3ea6
Signed-off-by: xuwei9 <xuwei9@mt.com>
Reviewed-on: https://gerrit.mot.com/1341251
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

dts:Troika  battery profile update

Troika  battery profile update
for local buy battery

Change-Id: I8b87b03637690a2837c75e641b18bf0f9ed509b5
Signed-off-by: xuwei9 <xuwei9@mt.com>
Reviewed-on: https://gerrit.mot.com/1341262
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key

power: use orderly shutdown

User an orderly shutdown for factory kill instead of a
kernel power off.  The orderly shutdown will attempt to
call the reboot binary from userspace first, and then
fallback to kernel power off if it fails.

Change-Id: Ia05f1c9e1ca25b403a4c5507da2d61d267e67Defender
Signed-off-by: zhaoxp3 <zhaoxp3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1339132
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wei Xu <xuwei9@mt.com>
Submit-Approved: Jira Key

Defenderconfig: disable console driver for user build

disable serial console for user build
Change-Id: I3a5dcc3163beece8c76a0855370b5efbe0112e50
Signed-off-by: zhaoxp3 <zhaoxp3@motorola.com>
Reviewed-on: https://gerrit.mot.com/1338193
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key

Optimize the scanning interval of schedule scan

The peak of current is 80mA for schedule scan. In the past, the
interval of schedule scan is 20s, it would increase the average
current by 20mA.

This change is to optimize the scanning interval so that the
average current can be reduced to less than 1mA
Min_Period: 48s
Max_Period: 500s
Exponent: 10
Step count: 7

48s, 48s, 48s, 48s, 48s, 48s, 48s, 480s,..., 480s, ...

Change-Id: Ie0535267e531fc84ce49f9130774b1c575081a1d
Signed-off-by: sunyue5 <sunyue5@motorola.com>
Reviewed-on: https://gerrit.mot.com/1337433
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Hua Tan <tanhua1@motorola.com>
Submit-Approved: Jira Key

[COMMON][9610] drivers : fix typec role swap

Fix Macbook pro role swap issue
Add data swap and power swap
Mot-CRs-fixed:(CR)

Change-Id: I5a239b7552f4c3bb464f72d5f9f5aaae9f76ef66
Signed-off-by: Junhan Bae <junhan84.bae@samsung.com>
Reviewed-on: https://gerrit.mot.com/1337168
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key