git.stricted.de - GitHub/mt8127/android_kernel_alcatel

KVM: x86: Improve thread safety in pit

commit 2febc839133280d5a5e8e1179c94ea674489dae2 upstream.

There's a race condition in the PIT emulation code in KVM. In
__kvm_migrate_pit_timer the pit_timer object is accessed without
synchronization. If the race condition occurs at the wrong time this
can crash the host kernel.

This fixes CVE-2014-3611.

Signed-off-by: Andrew Honig <ahonig@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Prevent host from panicking on shared MSR writes.

commit 8b3c3104c3f4f706e99365c3e0d2aa61b95f969f upstream.

The previous patch blocked invalid writes directly when the MSR
is written. As a precaution, prevent future similar mistakes by
gracefulling handle GPs caused by writes to shared MSRs.

Signed-off-by: Andrew Honig <ahonig@google.com>
[Remove parts obsoleted by Nadav's patch. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: fix excessive pages un-pinning in kvm_iommu_map error path.

commit 3d32e4dbe71374a6780eaf51d719d76f9a9bf22f upstream.

The third parameter of kvm_unpin_pages() when called from
kvm_iommu_map_pages() is wrong, it should be the number of pages to un-pin
and not the page size.

This error was facilitated with an inconsistent API: kvm_pin_pages() takes
a size, but kvn_unpin_pages() takes a number of pages, so fix the problem
by matching the two.

This was introduced by commit 350b8bd ("kvm: iommu: fix the third parameter
of kvm_iommu_put_pages (CVE-2014-3601)"), which fixes the lack of
un-pinning for pages intended to be un-pinned (i.e. memory leak) but
unfortunately potentially aggravated the number of pages we un-pin that
should have stayed pinned. As far as I understand though, the same
practical mitigations apply.

This issue was found during review of Red Hat 6.6 patches to prepare
Ksplice rebootless updates.

Thanks to Vegard for his time on a late Friday evening to help me in
understanding this code.

Fixes: 350b8bd ("kvm: iommu: fix the third parameter of... (CVE-2014-3601)")
Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jamie Iles <jamie.iles@oracle.com>
Reviewed-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: tda7432: Fix setting TDA7432_MUTE bit for TDA7432_RF register

commit 91ba0e59babdb3c7aca836a65f1095b3eaff7b06 upstream.

Fix a copy-paste bug when converting to the control framework.

Fixes: commit 5d478e0de871 ("[media] tda7432: convert to the control framework")

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ds3000: fix LNB supply voltage on Tevii S480 on initialization

commit 8c5bcded11cb607b1bb5920de3b9c882136d27db upstream.

The Tevii S480 outputs 18V on startup for the LNB supply voltage and does not
automatically power down. This blocks other receivers connected
to a satellite channel router (EN50494), since the receivers can not send the
required DiSEqC sequences when the Tevii card is connected to a the same SCR.

This patch switches off the LNB supply voltage on initialization of the frontend.

[mchehab@osg.samsung.com: add a comment about why we're explicitly
turning off voltage at device init]
Signed-off-by: Ulrich Eckhardt <uli@uli-eckhardt.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: em28xx-v4l: give back all active video buffers to the vb2 core properly on streaming stop

commit 627530c32a43283474e9dd3e954519410ffa033a upstream.

When a new video frame is started, the driver takes the next video buffer from
the list of active buffers and moves it to dev->usb_ctl.vid_buf / dev->usb_ctl.vbi_buf
for further processing.

On streaming stop we currently only give back the pending buffers from the list
but not the ones which are currently processed.

This causes the following warning from the vb2 core since kernel 3.15:

...
------------[ cut here ]------------
WARNING: CPU: 1 PID: 2284 at drivers/media/v4l2-core/videobuf2-core.c:2115 __vb2_queue_cancel+0xed/0x150 [videobuf2_core]()
[...]
Call Trace:
  [<c0769c46>] dump_stack+0x48/0x69
  [<c0245b69>] warn_slowpath_common+0x79/0x90
  [<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core]
  [<f925e4ad>] ? __vb2_queue_cancel+0xed/0x150 [videobuf2_core]
  [<c0245bfd>] warn_slowpath_null+0x1d/0x20
  [<f925e4ad>] __vb2_queue_cancel+0xed/0x150 [videobuf2_core]
  [<f925fa35>] vb2_internal_streamoff+0x35/0x90 [videobuf2_core]
  [<f925fac5>] vb2_streamoff+0x35/0x60 [videobuf2_core]
  [<f925fb27>] vb2_ioctl_streamoff+0x37/0x40 [videobuf2_core]
  [<f8e45895>] v4l_streamoff+0x15/0x20 [videodev]
  [<f8e4925d>] __video_do_ioctl+0x23d/0x2d0 [videodev]
  [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev]
  [<f8e48c63>] video_usercopy+0x203/0x5a0 [videodev]
  [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev]
  [<c039d0e7>] ? fsnotify+0x1e7/0x2b0
  [<f8e49012>] video_ioctl2+0x12/0x20 [videodev]
  [<f8e49020>] ? video_ioctl2+0x20/0x20 [videodev]
  [<f8e4461e>] v4l2_ioctl+0xee/0x130 [videodev]
  [<f8e44530>] ? v4l2_open+0xf0/0xf0 [videodev]
  [<c0378de2>] do_vfs_ioctl+0x2e2/0x4d0
  [<c0368eec>] ? vfs_write+0x13c/0x1c0
  [<c0369a8f>] ? vfs_writev+0x2f/0x50
  [<c0379028>] SyS_ioctl+0x58/0x80
  [<c076fff3>] sysenter_do_call+0x12/0x12
---[ end trace 5545f934409f13f4 ]---
...

Many thanks to Hans Verkuil, whose recently added check in the vb2 core unveiled
this long standing issue and who has investigated it further.

Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: v4l2-common: fix overflow in v4l_bound_align_image()

commit 3bacc10cd4a85bc70bc0b6c001d3bf995c7fe04c upstream.

Fix clamp_align() used in v4l_bound_align_image() to prevent overflow
when passed large value like UINT32_MAX.

In the current implementation:
    clamp_align(UINT32_MAX, 8, 8192, 3)

returns 8, because in line:

    x = (x + (1 << (align - 1))) & mask;

x overflows to (-1 + 4) & 0x7 = 3, while expected value is 8192.

v4l_bound_align_image() is heavily used in VIDIOC_S_FMT and
VIDIOC_SUBDEV_S_FMT ioctls handlers, and documentation of the latter
explicitly states that:

"The modified format should be as close as possible to the original
request."
  -- http://linuxtv.org/downloads/v4l-dvb-apis/vidioc-subdev-g-fmt.html

Thus one would expect, that passing UINT32_MAX as format width and
height will result in setting maximum possible resolution for the
device. Particularly, when the driver doesn't support
VIDIOC_ENUM_FRAMESIZES ioctl, which is common in the codebase.

Fixes changeset: b0d3159be9a3

Signed-off-by: Maciej Matraszek <m.matraszek@samsung.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/bios: memset dcb struct to zero before parsing

commit 595d373f1e9c9ce0fc946457fdb488e8a58972cd upstream.

Fixes type/mask calculation being based on uninitialised data for VGA
outputs.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/tilcdc: Fix the error path in tilcdc_load()

commit b478e336b3e75505707a11e78ef8b964ef0a03af upstream.

The current error path calls tilcdc_unload() in case of an error to release
the resources. However, this is wrong because not all resources have been
allocated by the time an error occurs in tilcdc_load().

To fix it, this commit adds proper labels to bail out at the different
stages in the load function, and release only the resources actually allocated.

Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Johannes Pointner <johannes.pointner@br-automation.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes: 3a49012224ca ("drm/tilcdc: panel: fix leak when unloading the module")
Signed-off-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ast: Fix HW cursor image

commit 1e99cfa8de0f0879091e33cd65fd60418d006ad9 upstream.

The translation from the X driver to the KMS one typo'ed a couple
of array indices, causing the HW cursor to look weird (blocky with
leaking edge colors). This fixes it.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544

commit 993b3a3f80a7842a48cd46c2b41e1b3ef6302468 upstream.

These models need i8042.notimeout, otherwise the touchpad will not work.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=69731
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1111138
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: i8042 - add noloop quirk for Asus X750LN

commit 9ff84a17302aeb8913ff244ecc0d8f9d219fecb5 upstream.

Without this the aux port does not get detected, and consequently the
touchpad will not work.

https://bugzilla.redhat.com/show_bug.cgi?id=1110011

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

framebuffer: fix border color

commit f74a289b9480648a654e5afd8458c2263c03a1e1 upstream.

The framebuffer code uses the current background color to fill the border
when switching consoles, however, this results in inconsistent behavior.
For example:
- start Midnigh Commander
- the border is black
- switch to another console and switch back
- the border is cyan
- type something into the command line in mc
- the border is cyan
- switch to another console and switch back
- the border is black
- press F9 to go to menu
- the border is black
- switch to another console and switch back
- the border is dark blue

When switching to a console with Midnight Commander, the border is random
color that was left selected by the slang subsystem.

This patch fixes this inconsistency by always using black as the
background color when switching consoles.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

modules, lock around setting of MODULE_STATE_UNFORMED

commit d3051b489aa81ca9ba62af366149ef42b8dae97c upstream.

A panic was seen in the following sitation.

There are two threads running on the system. The first thread is a system
monitoring thread that is reading /proc/modules. The second thread is
loading and unloading a module (in this example I'm using my simple
dummy-module.ko).  Note, in the "real world" this occurred with the qlogic
driver module.

When doing this, the following panic occurred:

------------[ cut here ]------------
kernel BUG at kernel/module.c:3739!
invalid opcode: 0000 [#1] SMP
Modules linked in: binfmt_misc sg nfsv3 rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel lrw igb gf128mul glue_helper iTCO_wdt iTCO_vendor_support ablk_helper ptp sb_edac cryptd pps_core edac_core shpchp i2c_i801 pcspkr wmi lpc_ich ioatdma mfd_core dca ipmi_si nfsd ipmi_msghandler auth_rpcgss nfs_acl lockd sunrpc xfs libcrc32c sr_mod cdrom sd_mod crc_t10dif crct10dif_common mgag200 syscopyarea sysfillrect sysimgblt i2c_algo_bit drm_kms_helper ttm isci drm libsas ahci libahci scsi_transport_sas libata i2c_core dm_mirror dm_region_hash dm_log dm_mod [last unloaded: dummy_module]
CPU: 37 PID: 186343 Comm: cat Tainted: GF          O--------------   3.10.0+ #7
Hardware name: Intel Corporation S2600CP/S2600CP, BIOS RMLSDP.86I.00.29.D696.1311111329 11/11/2013
task: ffff8807fd2d8000 ti: ffff88080fa7c000 task.ti: ffff88080fa7c000
RIP: 0010:[<ffffffff810d64c5>]  [<ffffffff810d64c5>] module_flags+0xb5/0xc0
RSP: 0018:ffff88080fa7fe18  EFLAGS: 00010246
RAX: 0000000000000003 RBX: ffffffffa03b5200 RCX: 0000000000000000
RDX: 0000000000001000 RSI: ffff88080fa7fe38 RDI: ffffffffa03b5000
RBP: ffff88080fa7fe28 R08: 0000000000000010 R09: 0000000000000000
R10: 0000000000000000 R11: 000000000000000f R12: ffffffffa03b5000
R13: ffffffffa03b5008 R14: ffffffffa03b5200 R15: ffffffffa03b5000
FS:  00007f6ae57ef740(0000) GS:ffff88101e7a0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000404f70 CR3: 0000000ffed48000 CR4: 00000000001407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
  ffffffffa03b5200 ffff8810101e4800 ffff88080fa7fe70 ffffffff810d666c
  ffff88081e807300 000000002e0f2fbf 0000000000000000 ffff88100f257b00
  ffffffffa03b5008 ffff88080fa7ff48 ffff8810101e4800 ffff88080fa7fee0
Call Trace:
  [<ffffffff810d666c>] m_show+0x19c/0x1e0
  [<ffffffff811e4d7e>] seq_read+0x16e/0x3b0
  [<ffffffff812281ed>] proc_reg_read+0x3d/0x80
  [<ffffffff811c0f2c>] vfs_read+0x9c/0x170
  [<ffffffff811c1a58>] SyS_read+0x58/0xb0
  [<ffffffff81605829>] system_call_fastpath+0x16/0x1b
Code: 48 63 c2 83 c2 01 c6 04 03 29 48 63 d2 eb d9 0f 1f 80 00 00 00 00 48 63 d2 c6 04 13 2d 41 8b 0c 24 8d 50 02 83 f9 01 75 b2 eb cb <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41
RIP  [<ffffffff810d64c5>] module_flags+0xb5/0xc0
  RSP <ffff88080fa7fe18>

    Consider the two processes running on the system.

    CPU 0 (/proc/modules reader)
    CPU 1 (loading/unloading module)

    CPU 0 opens /proc/modules, and starts displaying data for each module by
    traversing the modules list via fs/seq_file.c:seq_open() and
    fs/seq_file.c:seq_read().  For each module in the modules list, seq_read
    does

            op->start()  <-- this is a pointer to m_start()
            op->show()   <- this is a pointer to m_show()
            op->stop()   <-- this is a pointer to m_stop()

    The m_start(), m_show(), and m_stop() module functions are defined in
    kernel/module.c. The m_start() and m_stop() functions acquire and release
    the module_mutex respectively.

    ie) When reading /proc/modules, the module_mutex is acquired and released
    for each module.

    m_show() is called with the module_mutex held.  It accesses the module
    struct data and attempts to write out module data.  It is in this code
    path that the above BUG_ON() warning is encountered, specifically m_show()
    calls

    static char *module_flags(struct module *mod, char *buf)
    {
            int bx = 0;

            BUG_ON(mod->state == MODULE_STATE_UNFORMED);
    ...

    The other thread, CPU 1, in unloading the module calls the syscall
    delete_module() defined in kernel/module.c.  The module_mutex is acquired
    for a short time, and then released.  free_module() is called without the
    module_mutex.  free_module() then sets mod->state = MODULE_STATE_UNFORMED,
    also without the module_mutex.  Some additional code is called and then the
    module_mutex is reacquired to remove the module from the modules list:

        /* Now we can delete it from the lists */
        mutex_lock(&module_mutex);
        stop_machine(__unlink_module, mod, NULL);
        mutex_unlock(&module_mutex);

This is the sequence of events that leads to the panic.

CPU 1 is removing dummy_module via delete_module().  It acquires the
module_mutex, and then releases it.  CPU 1 has NOT set dummy_module->state to
MODULE_STATE_UNFORMED yet.

CPU 0, which is reading the /proc/modules, acquires the module_mutex and
acquires a pointer to the dummy_module which is still in the modules list.
CPU 0 calls m_show for dummy_module.  The check in m_show() for
MODULE_STATE_UNFORMED passed for dummy_module even though it is being
torn down.

Meanwhile CPU 1, which has been continuing to remove dummy_module without
holding the module_mutex, now calls free_module() and sets
dummy_module->state to MODULE_STATE_UNFORMED.

CPU 0 now calls module_flags() with dummy_module and ...

static char *module_flags(struct module *mod, char *buf)
{
        int bx = 0;

        BUG_ON(mod->state == MODULE_STATE_UNFORMED);

and BOOM.

Acquire and release the module_mutex lock around the setting of
MODULE_STATE_UNFORMED in the teardown path, which should resolve the
problem.

Testing: In the unpatched kernel I can panic the system within 1 minute by
doing

while (true) do insmod dummy_module.ko; rmmod dummy_module.ko; done

and

while (true) do cat /proc/modules; done

in separate terminals.

In the patched kernel I was able to run just over one hour without seeing
any issues.  I also verified the output of panic via sysrq-c and the output
of /proc/modules looks correct for all three states for the dummy_module.

        dummy_module 12661 0 - Unloading 0xffffffffa03a5000 (OE-)
        dummy_module 12661 0 - Live 0xffffffffa03bb000 (OE)
        dummy_module 14015 1 - Loading 0xffffffffa03a5000 (OE+)

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm log userspace: fix memory leak in dm_ulog_tfr_init failure path

commit 56ec16cb1e1ce46354de8511eef962a417c32c92 upstream.

If cn_add_callback() fails in dm_ulog_tfr_init(), it does not
deallocate prealloced memory but calls cn_del_callback().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Reviewed-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: fix alignment_offset math that assumes io_min is a power-of-2

commit b8839b8c55f3fdd60dc36abcda7e0266aff7985c upstream.

The math in both blk_stack_limits() and queue_limit_alignment_offset()
assume that a block device's io_min (aka minimum_io_size) is always a
power-of-2. Fix the math such that it works for non-power-of-2 io_min.

This issue (of alignment_offset != 0) became apparent when testing
dm-thinp with a thinp blocksize that matches a RAID6 stripesize of
1280K. Commit fdfb4c8c1 ("dm thin: set minimum_io_size to pool's data
block size") unlocked the potential for alignment_offset != 0 due to
the dm-thin-pool's io_min possibly being a non-power-of-2.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drbd: compute the end before rb_insert_augmented()

commit 82cfb90bc99d7b7e0ec62d0505b9d4f06805d5db upstream.

Commit 98683650 "Merge branch 'drbd-8.4_ed6' into
for-3.8-drivers-drbd-8.4_ed6" switches to the new augment API, but the
new API requires that the tree is augmented before rb_insert_augmented()
is called, which is missing.

So we add the augment-code to drbd_insert_interval() when it travels the
tree up to down before rb_insert_augmented(). See the example in
include/linux/interval_tree_generic.h or Documentation/rbtree.txt.

drbd_insert_interval() may cancel the insertion when traveling, in this
case, the just added augment-code does nothing before cancel since the
@this node is already in the subtrees in this case.

CC: Michel Lespinasse <walken@google.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Andreas Gruenbacher <agruen@linbit.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm bufio: update last_accessed when relinking a buffer

commit eb76faf53b1ff7a77ce3f78cc98ad392ac70c2a0 upstream.

The 'last_accessed' member of the dm_buffer structure was only set when
the the buffer was created. This led to each buffer being discarded
after dm_bufio_max_age time even if it was used recently. In practice
this resulted in all thinp metadata being evicted soon after being read
-- this is particularly problematic for metadata intensive workloads
like multithreaded small random IO.

'last_accessed' is now updated each time the buffer is moved to the head
of the LRU list, so the buffer is now properly discarded if it was not
used in dm_bufio_max_age time.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio_pci: fix virtio spec compliance on restore

commit 6fbc198cf623944ab60a1db6d306a4d55cdd820d upstream.

On restore, virtio pci does the following:
+ set features
+ init vqs etc - device can be used at this point!
+ set ACKNOWLEDGE,DRIVER and DRIVER_OK status bits

This is in violation of the virtio spec, which
requires the following order:
- ACKNOWLEDGE
- DRIVER
- init vqs
- DRIVER_OK

This behaviour will break with hypervisors that assume spec compliant
behaviour. It seems like a good idea to have this patch applied to
stable branches to reduce the support butden for the hypervisors.

Cc: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: fix inode security list corruption

commit 923190d32de4428afbea5e5773be86bea60a9925 upstream.

sb_finish_set_opts() can race with inode_free_security()
when initializing inode security structures for inodes
created prior to initial policy load or by the filesystem
during ->mount().   This appears to have always been
a possible race, but commit 3dc91d4 ("SELinux:  Fix possible
NULL pointer dereference in selinux_inode_permission()")
made it more evident by immediately reusing the unioned
list/rcu element  of the inode security structure for call_rcu()
upon an inode_free_security().  But the underlying issue
was already present before that commit as a possible use-after-free
of isec.

Shivnandan Kumar reported the list corruption and proposed
a patch to split the list and rcu elements out of the union
as separate fields of the inode_security_struct so that setting
the rcu element would not affect the list element.  However,
this would merely hide the issue and not truly fix the code.

This patch instead moves up the deletion of the list entry
prior to dropping the sbsec->isec_lock initially.  Then,
if the inode is dropped subsequently, there will be no further
references to the isec.

Reported-by: Shivnandan Kumar <shivnandan.k@samsung.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pstore: Fix duplicate {console,ftrace}-efi entries

commit d4bf205da618bbd0b038e404d646f14e76915718 upstream.

The pstore filesystem still creates duplicate filename/inode pairs for
some pstore types.  Add the id to the filename to prevent that.

Before patch:

[/sys/fs/pstore] ls -li
total 0
1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi
1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi
1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi
1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi
1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi
1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi
1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi
1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi
1250 -r--r--r--. 1 root root 67 Sep 29 17:09 console-efi

After:

[/sys/fs/pstore] ls -li
total 0
1232 -r--r--r--. 1 root root 148 Sep 29 17:09 console-efi-141202499100000
1231 -r--r--r--. 1 root root  67 Sep 29 17:09 console-efi-141202499200000
1230 -r--r--r--. 1 root root 148 Sep 29 17:44 console-efi-141202705400000
1229 -r--r--r--. 1 root root  67 Sep 29 17:44 console-efi-141202705500000
1228 -r--r--r--. 1 root root  67 Sep 29 20:42 console-efi-141203772600000
1227 -r--r--r--. 1 root root 148 Sep 29 23:42 console-efi-141204854900000
1226 -r--r--r--. 1 root root  67 Sep 29 23:42 console-efi-141204855000000
1225 -r--r--r--. 1 root root 148 Sep 29 23:59 console-efi-141204954200000
1224 -r--r--r--. 1 root root  67 Sep 29 23:59 console-efi-141204954400000

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mfd: rtsx_pcr: Fix MSI enable error handling

commit 5152970538a5e16c03bbcb9f1c780489a795ed40 upstream.

pci_enable_msi() can return failure with both positive and negative
integers -- it returns 0 for success -- but is only tested here for
"if (ret < 0)". This causes us to try to use MSI on the RTS5249 SD
reader in the Dell XPS 11 when enabling MSI failed, causing:

[ 1.737110] rtsx_pci: probe of 0000:05:00.0 failed with error -110

Reported-by: D. Jared Dominguez <Jared_Dominguez@Dell.com>
Tested-by: D. Jared Dominguez <Jared_Dominguez@Dell.com>
Signed-off-by: Chris Ball <chris@printf.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mnt: Prevent pivot_root from creating a loop in the mount tree

commit 0d0826019e529f21c84687521d03f60cd241ca7d upstream.

Andy Lutomirski recently demonstrated that when chroot is used to set
the root path below the path for the new ``root'' passed to pivot_root
the pivot_root system call succeeds and leaks mounts.

In examining the code I see that starting with a new root that is
below the current root in the mount tree will result in a loop in the
mount tree after the mounts are detached and then reattached to one
another. Resulting in all kinds of ugliness including a leak of that
mounts involved in the leak of the mount loop.

Prevent this problem by ensuring that the new mount is reachable from
the current root of the mount tree.

[Added stable cc. Fixes CVE-2014-7970. --Andy]

Reported-by: Andy Lutomirski <luto@amacapital.net>
Reviewed-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/87bnpmihks.fsf@x220.int.ebiederm.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UBI: add missing kmem_cache_free() in process_pool_aeb error path

commit 1bf1890e86869032099b539bc83b098be12fc5a7 upstream.

I ran into this error after a ubiupdatevol, because I forgot to backport
e9110361a9a4 UBI: fix the volumes tree sorting criteria.

UBI error: process_pool_aeb: orphaned volume in fastmap pool
UBI error: ubi_scan_fastmap: Attach by fastmap failed, doing a full scan!
kmem_cache_destroy ubi_ainf_peb_slab: Slab cache still has objects
CPU: 0 PID: 1 Comm: swapper Not tainted 3.14.18-00053-gf05cac8dbf85 #1
[<c000d298>] (unwind_backtrace) from [<c000baa8>] (show_stack+0x10/0x14)
[<c000baa8>] (show_stack) from [<c01b7a68>] (destroy_ai+0x230/0x244)
[<c01b7a68>] (destroy_ai) from [<c01b8fd4>] (ubi_attach+0x98/0x1ec)
[<c01b8fd4>] (ubi_attach) from [<c01ade90>] (ubi_attach_mtd_dev+0x2b8/0x868)
[<c01ade90>] (ubi_attach_mtd_dev) from [<c038b510>] (ubi_init+0x1dc/0x2ac)
[<c038b510>] (ubi_init) from [<c0008860>] (do_one_initcall+0x94/0x140)
[<c0008860>] (do_one_initcall) from [<c037aadc>] (kernel_init_freeable+0xe8/0x1b0)
[<c037aadc>] (kernel_init_freeable) from [<c02730ac>] (kernel_init+0x8/0xe4)
[<c02730ac>] (kernel_init) from [<c00093f0>] (ret_from_fork+0x14/0x24)
UBI: scanning is finished

Freeing the cache in the error path fixes the Slab error.

Tested on at91sam9g35 (3.14.18+fastmap backports)

Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

random: add and use memzero_explicit() for clearing data

commit d4c5efdb97773f59a2b711754ca0953f24516739 upstream.

zatimend has reported that in his environment (3.16/gcc4.8.3/corei7)
memset() calls which clear out sensitive data in extract_{buf,entropy,
entropy_user}() in random driver are being optimized away by gcc.

Add a helper memzero_explicit() (similarly as explicit_bzero() variants)
that can be used in such cases where a variable with sensitive data is
being cleared out in the end. Other use cases might also be in crypto
code. [ I have put this into lib/string.c though, as it's always built-in
and doesn't need any dependencies then. ]

Fixes kernel bugzilla: 82041

Reported-by: zatimend@hotmail.co.uk
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: more robust crypto_memneq

commit fe8c8a126806fea4465c43d62a1f9d273a572bf5 upstream.

[Only use the compiler.h portion of this patch, to get the
OPTIMIZER_HIDE_VAR() macro, which we need for other -stable patches
- gregkh]

Disabling compiler optimizations can be fragile, since a new
optimization could be added to -O0 or -Os that breaks the assumptions
the code is making.

Instead of disabling compiler optimizations, use a dummy inline assembly
(based on RELOC_HIDE) to block the problematic kinds of optimization,
while still allowing other optimizations to be applied to the code.

The dummy inline assembly is added after every OR, and has the
accumulator variable as its input and output. The compiler is forced to
assume that the dummy inline assembly could both depend on the
accumulator variable and change the accumulator variable, so it is
forced to compute the value correctly before the inline assembly, and
cannot assume anything about its value after the inline assembly.

This change should be enough to make crypto_memneq work correctly (with
data-independent timing) even if it is inlined at its call sites. That
can be done later in a followup patch.

Compile-tested on x86_64.

Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.eti.br>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fix misuses of f_count() in ppp and netlink

commit 24dff96a37a2ca319e75a74d3929b2de22447ca6 upstream.

we used to check for "nobody else could start doing anything with
that opened file" by checking that refcount was 2 or less - one
for descriptor table and one we'd acquired in fget() on the way to
wherever we are.  That was race-prone (somebody else might have
had a reference to descriptor table and do fget() just as we'd
been checking) and it had become flat-out incorrect back when
we switched to fget_light() on those codepaths - unlike fget(),
it doesn't grab an extra reference unless the descriptor table
is shared.  The same change allowed a race-free check, though -
we are safe exactly when refcount is less than 2.

It was a long time ago; pre-2.6.12 for ioctl() (the codepath leading
to ppp one) and 2.6.17 for sendmsg() (netlink one).  OTOH,
netlink hadn't grown that check until 3.9 and ppp used to live
in drivers/net, not drivers/net/ppp until 3.1.  The bug existed
well before that, though, and the same fix used to apply in old
location of file.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kill wbuf_queued/wbuf_dwork_lock

commit 99358a1ca53e8e6ce09423500191396f0e6584d2 upstream.

schedule_delayed_work() happening when the work is already pending is
a cheap no-op. Don't bother with ->wbuf_queued logics - it's both
broken (cancelling ->wbuf_dwork leaves it set, as spotted by Jeff Harris)
and pointless. It's cheaper to let schedule_delayed_work() handle that
case.

Reported-by: Jeff Harris <jefftharris@gmail.com>
Tested-by: Jeff Harris <jefftharris@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: Zero-clear reserved fields of PCM status ioctl in compat mode

commit 317168d0c766defd14b3d0e9c2c4a9a258b803ee upstream.

In compat mode, we copy each field of snd_pcm_status struct but don't
touch the reserved fields, and this leaves uninitialized values
there. Meanwhile the native ioctl does zero-clear the whole
structure, so we should follow the same rule in compat mode, too.

Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

evm: check xattr value length and type in evm_inode_setxattr()

commit 3b1deef6b1289a99505858a3b212c5b50adf0c2f upstream.

evm_inode_setxattr() can be called with no value. The function does not
check the length so that following command can be used to produce the
kernel oops: setfattr -n security.evm FOO. This patch fixes it.

Changes in v3:
* there is no reason to return different error codes for EVM_XATTR_HMAC
  and non EVM_XATTR_HMAC. Remove unnecessary test then.

Changes in v2:
* testing for validity of xattr type

[ 1106.396921] BUG: unable to handle kernel NULL pointer dereference at           (null)
[ 1106.398192] IP: [<ffffffff812af7b8>] evm_inode_setxattr+0x2a/0x48
[ 1106.399244] PGD 29048067 PUD 290d7067 PMD 0
[ 1106.399953] Oops: 0000 [#1] SMP
[ 1106.400020] Modules linked in: bridge stp llc evdev serio_raw i2c_piix4 button fuse
[ 1106.400020] CPU: 0 PID: 3635 Comm: setxattr Not tainted 3.16.0-kds+ #2936
[ 1106.400020] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 1106.400020] task: ffff8800291a0000 ti: ffff88002917c000 task.ti: ffff88002917c000
[ 1106.400020] RIP: 0010:[<ffffffff812af7b8>]  [<ffffffff812af7b8>] evm_inode_setxattr+0x2a/0x48
[ 1106.400020] RSP: 0018:ffff88002917fd50  EFLAGS: 00010246
[ 1106.400020] RAX: 0000000000000000 RBX: ffff88002917fdf8 RCX: 0000000000000000
[ 1106.400020] RDX: 0000000000000000 RSI: ffffffff818136d3 RDI: ffff88002917fdf8
[ 1106.400020] RBP: ffff88002917fd68 R08: 0000000000000000 R09: 00000000003ec1df
[ 1106.400020] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800438a0a00
[ 1106.400020] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 1106.400020] FS:  00007f7dfa7d7740(0000) GS:ffff88005da00000(0000) knlGS:0000000000000000
[ 1106.400020] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1106.400020] CR2: 0000000000000000 CR3: 000000003763e000 CR4: 00000000000006f0
[ 1106.400020] Stack:
[ 1106.400020]  ffff8800438a0a00 ffff88002917fdf8 0000000000000000 ffff88002917fd98
[ 1106.400020]  ffffffff812a1030 ffff8800438a0a00 ffff88002917fdf8 0000000000000000
[ 1106.400020]  0000000000000000 ffff88002917fde0 ffffffff8116d08a ffff88002917fdc8
[ 1106.400020] Call Trace:
[ 1106.400020]  [<ffffffff812a1030>] security_inode_setxattr+0x5d/0x6a
[ 1106.400020]  [<ffffffff8116d08a>] vfs_setxattr+0x6b/0x9f
[ 1106.400020]  [<ffffffff8116d1e0>] setxattr+0x122/0x16c
[ 1106.400020]  [<ffffffff811687e8>] ? mnt_want_write+0x21/0x45
[ 1106.400020]  [<ffffffff8114d011>] ? __sb_start_write+0x10f/0x143
[ 1106.400020]  [<ffffffff811687e8>] ? mnt_want_write+0x21/0x45
[ 1106.400020]  [<ffffffff811687c0>] ? __mnt_want_write+0x48/0x4f
[ 1106.400020]  [<ffffffff8116d3e6>] SyS_setxattr+0x6e/0xb0
[ 1106.400020]  [<ffffffff81529da9>] system_call_fastpath+0x16/0x1b
[ 1106.400020] Code: c3 0f 1f 44 00 00 55 48 89 e5 41 55 49 89 d5 41 54 49 89 fc 53 48 89 f3 48 c7 c6 d3 36 81 81 48 89 df e8 18 22 04 00 85 c0 75 07 <41> 80 7d 00 02 74 0d 48 89 de 4c 89 e7 e8 5a fe ff ff eb 03 83
[ 1106.400020] RIP  [<ffffffff812af7b8>] evm_inode_setxattr+0x2a/0x48
[ 1106.400020]  RSP <ffff88002917fd50>
[ 1106.400020] CR2: 0000000000000000
[ 1106.428061] ---[ end trace ae08331628ba3050 ]---

Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86, pageattr: Prevent overflow in slow_virt_to_phys() for X86_PAE

commit d1cd1210834649ce1ca6bafe5ac25d2f40331343 upstream.

pte_pfn() returns a PFN of long (32 bits in 32-PAE), so "long <<
PAGE_SHIFT" will overflow for PFNs above 4GB.

Due to this issue, some Linux 32-PAE distros, running as guests on Hyper-V,
with 5GB memory assigned, can't load the netvsc driver successfully and
hence the synthetic network device can't work (we can use the kernel parameter
mem=3000M to work around the issue).

Cast pte_pfn() to phys_addr_t before shifting.

Fixes: "commit d76565344512: x86, mm: Create slow_virt_to_phys()"
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: gregkh@linuxfoundation.org
Cc: linux-mm@kvack.org
Cc: olaf@aepfle.de
Cc: apw@canonical.com
Cc: jasowang@redhat.com
Cc: dave.hansen@intel.com
Cc: riel@redhat.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1414580017-27444-1-git-send-email-decui@microsoft.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86_64, entry: Fix out of bounds read on sysenter

commit 653bc77af60911ead1f423e588f54fc2547c4957 upstream.

Rusty noticed a Really Bad Bug (tm) in my NT fix.  The entry code
reads out of bounds, causing the NT fix to be unreliable.  But, and
this is much, much worse, if your stack is somehow just below the
top of the direct map (or a hole), you read out of bounds and crash.

Excerpt from the crash:

[    1.129513] RSP: 0018:ffff88001da4bf88  EFLAGS: 00010296

  2b:*    f7 84 24 90 00 00 00     testl  $0x4000,0x90(%rsp)

That read is deterministically above the top of the stack.  I
thought I even single-stepped through this code when I wrote it to
check the offset, but I clearly screwed it up.

Fixes: 8c7aa698baca ("x86_64, entry: Filter RFLAGS.NT on entry from userspace")
Reported-by: Rusty Russell <rusty@ozlabs.org>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86_64, entry: Filter RFLAGS.NT on entry from userspace

commit 8c7aa698baca5e8f1ba9edb68081f1e7a1abf455 upstream.

The NT flag doesn't do anything in long mode other than causing IRET
to #GP.  Oddly, CPL3 code can still set NT using popf.

Entry via hardware or software interrupt clears NT automatically, so
the only relevant entries are fast syscalls.

If user code causes kernel code to run with NT set, then there's at
least some (small) chance that it could cause trouble.  For example,
user code could cause a call to EFI code with NT set, and who knows
what would happen?  Apparently some games on Wine sometimes do
this (!), and, if an IRET return happens, they will segfault.  That
segfault cannot be handled, because signal delivery fails, too.

This patch programs the CPU to clear NT on entry via SYSCALL (both
32-bit and 64-bit, by my reading of the AMD APM), and it clears NT
in software on entry via SYSENTER.

To save a few cycles, this borrows a trick from Jan Beulich in Xen:
it checks whether NT is set before trying to clear it.  As a result,
it seems to have very little effect on SYSENTER performance on my
machine.

There's another minor bug fix in here: it looks like the CFI
annotations were wrong if CONFIG_AUDITSYSCALL=n.

Testers beware: on Xen, SYSENTER with NT set turns into a GPF.

I haven't touched anything on 32-bit kernels.

The syscall mask change comes from a variant of this patch by Anish
Bhatt.

Note to stable maintainers: there is no known security issue here.
A misguided program can set NT and cause the kernel to try and fail
to deliver SIGSEGV, crashing the program.  This patch fixes Far Cry
on Wine: https://bugs.winehq.org/show_bug.cgi?id=33275

Reported-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Link: http://lkml.kernel.org/r/395749a5d39a29bd3e4b35899cf3a3c1340e5595.1412189265.git.luto@amacapital.net
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86, flags: Rename X86_EFLAGS_BIT1 to X86_EFLAGS_FIXED

commit 1adfa76a95fe4444124a502f7cc858a39d5b8e01 upstream.

Bit 1 in the x86 EFLAGS is always set. Name the macro something that
actually tries to explain what it is all about, rather than being a
tautology.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lkml.kernel.org/n/tip-f10rx5vjjm6tfnt8o1wseb3v@git.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86, fpu: shift drop_init_fpu() from save_xstate_sig() to handle_signal()

commit 66463db4fc5605d51c7bb81d009d5bf30a783a2c upstream.

save_xstate_sig()->drop_init_fpu() doesn't look right. setup_rt_frame()
can fail after that, in this case the next setup_rt_frame() triggered
by SIGSEGV won't save fpu simply because the old state was lost. This
obviously mean that fpu won't be restored after sys_rt_sigreturn() from
SIGSEGV handler.

Shift drop_init_fpu() into !failed branch in handle_signal().

Test-case (needs -O2):

#include <stdio.h>
#include <signal.h>
#include <unistd.h>
#include <sys/syscall.h>
#include <sys/mman.h>
#include <pthread.h>
#include <assert.h>

volatile double D;

void test(double d)
{
int pid = getpid();

for (D = d; D == d; ) {
/* sys_tkill(pid, SIGHUP); asm to avoid save/reload
* fp regs around "C" call */
asm ("" : : "a"(200), "D"(pid), "S"(1));
asm ("syscall" : : : "ax");
}

printf("ERR!!\n");
}

void sigh(int sig)
{
}

char altstack[4096 * 10] __attribute__((aligned(4096)));

void *tfunc(void *arg)
{
for (;;) {
mprotect(altstack, sizeof(altstack), PROT_READ);
mprotect(altstack, sizeof(altstack), PROT_READ|PROT_WRITE);
}
}

int main(void)
{
stack_t st = {
.ss_sp = altstack,
.ss_size = sizeof(altstack),
.ss_flags = SS_ONSTACK,
};

struct sigaction sa = {
.sa_handler = sigh,
};

pthread_t pt;

sigaction(SIGSEGV, &sa, NULL);
sigaltstack(&st, NULL);
sa.sa_flags = SA_ONSTACK;
sigaction(SIGHUP, &sa, NULL);

pthread_create(&pt, NULL, tfunc, NULL);

test(123.456);
return 0;
}

Reported-by: Bean Anderson <bean@azulsystems.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20140902175713.GA21646@redhat.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86, fpu: __restore_xstate_sig()->math_state_restore() needs preempt_disable()

commit df24fb859a4e200d9324e2974229fbb7adf00aef upstream.

Add preempt_disable() + preempt_enable() around math_state_restore() in
__restore_xstate_sig(). Otherwise __switch_to() after __thread_fpu_begin()
can overwrite fpu->state we are going to restore.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Link: http://lkml.kernel.org/r/20140902175717.GA21649@redhat.com
Reviewed-by: Suresh Siddha <sbsiddha@gmail.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: Reject x32 executables if x32 ABI not supported

commit 0e6d3112a4e95d55cf6dca88f298d5f4b8f29bd1 upstream.

It is currently possible to execve() an x32 executable on an x86_64
kernel that has only ia32 compat enabled. However all its syscalls
will fail, even _exit(). This usually causes it to segfault.

Change the ELF compat architecture check so that x32 executables are
rejected if we don't support the x32 ABI.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Link: http://lkml.kernel.org/r/1410120305.6822.9.camel@decadent.org.uk
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfs: fix data corruption when blocksize < pagesize for mmaped data

commit 90a8020278c1598fafd071736a0846b38510309c upstream.

->page_mkwrite() is used by filesystems to allocate blocks under a page
which is becoming writeably mmapped in some process' address space. This
allows a filesystem to return a page fault if there is not enough space
available, user exceeds quota or similar problem happens, rather than
silently discarding data later when writepage is called.

However VFS fails to call ->page_mkwrite() in all the cases where
filesystems need it when blocksize < pagesize. For example when
blocksize = 1024, pagesize = 4096 the following is problematic:
  ftruncate(fd, 0);
  pwrite(fd, buf, 1024, 0);
  map = mmap(NULL, 1024, PROT_WRITE, MAP_SHARED, fd, 0);
  map[0] = 'a';       ----> page_mkwrite() for index 0 is called
  ftruncate(fd, 10000); /* or even pwrite(fd, buf, 1, 10000) */
  mremap(map, 1024, 10000, 0);
  map[4095] = 'a';    ----> no page_mkwrite() called

At the moment ->page_mkwrite() is called, filesystem can allocate only
one block for the page because i_size == 1024. Otherwise it would create
blocks beyond i_size which is generally undesirable. But later at
->writepage() time, we also need to store data at offset 4095 but we
don't have block allocated for it.

This patch introduces a helper function filesystems can use to have
->page_mkwrite() called at all the necessary moments.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UBIFS: fix free log space calculation

commit ba29e721eb2df6df8f33c1f248388bb037a47914 upstream.

Hu (hujianyang <hujianyang@huawei.com>) discovered an issue in the
'empty_log_bytes()' function, which calculates how many bytes are left in the
log:

"
If 'c->lhead_lnum + 1 == c->ltail_lnum' and 'c->lhead_offs == c->leb_size', 'h'
would equalent to 't' and 'empty_log_bytes()' would return 'c->log_bytes'
instead of 0.
"

At this point it is not clear what would be the consequences of this, and
whether this may lead to any problems, but this patch addresses the issue just
in case.

Tested-by: hujianyang <hujianyang@huawei.com>
Reported-by: hujianyang <hujianyang@huawei.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UBIFS: fix a race condition

commit 052c28073ff26f771d44ef33952a41d18dadd255 upstream.

Hu (hujianyang@huawei.com) discovered a race condition which may lead to a
situation when UBIFS is unable to mount the file-system after an unclean
reboot. The problem is theoretical, though.

In UBIFS, we have the log, which basically a set of LEBs in a certain area. The
log has the tail and the head.

Every time user writes data to the file-system, the UBIFS journal grows, and
the log grows as well, because we append new reference nodes to the head of the
log. So the head moves forward all the time, while the log tail stays at the
same position.

At any time, the UBIFS master node points to the tail of the log. When we mount
the file-system, we scan the log, and we always start from its tail, because
this is where the master node points to. The only occasion when the tail of the
log changes is the commit operation.

The commit operation has 2 phases - "commit start" and "commit end". The former
is relatively short, and does not involve much I/O. During this phase we mostly
just build various in-memory lists of the things which have to be written to
the flash media during "commit end" phase.

During the commit start phase, what we do is we "clean" the log. Indeed, the
commit operation will index all the data in the journal, so the entire journal
"disappears", and therefore the data in the log become unneeded. So we just
move the head of the log to the next LEB, and write the CS node there. This LEB
will be the tail of the new log when the commit operation finishes.

When the "commit start" phase finishes, users may write more data to the
file-system, in parallel with the ongoing "commit end" operation. At this point
the log tail was not changed yet, it is the same as it had been before we
started the commit. The log head keeps moving forward, though.

The commit operation now needs to write the new master node, and the new master
node should point to the new log tail. After this the LEBs between the old log
tail and the new log tail can be unmapped and re-used again.

And here is the possible problem. We do 2 operations: (a) We first update the
log tail position in memory (see 'ubifs_log_end_commit()'). (b) And then we
write the master node (see the big lock of code in 'do_commit()').

But nothing prevents the log head from moving forward between (a) and (b), and
the log head may "wrap" now to the old log tail. And when the "wrap" happens,
the contends of the log tail gets erased. Now a power cut happens and we are in
trouble. We end up with the old master node pointing to the old tail, which was
erased. And replay fails because it expects the master node to point to the
correct log tail at all times.

This patch merges the abovementioned (a) and (b) operations by moving the master
node change code to the 'ubifs_log_end_commit()' function, so that it runs with
the log mutex locked, which will prevent the log from being changed benween
operations (a) and (b).

Reported-by: hujianyang <hujianyang@huawei.com>
Tested-by: hujianyang <hujianyang@huawei.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

UBIFS: remove mst_mutex

commit 07e19dff63e3d5d6500d831e36554ac9b1b0560e upstream.

The 'mst_mutex' is not needed since because 'ubifs_write_master()' is only
called on the mount path and commit path. The mount path is sequential and
there is no parallelism, and the commit path is also serialized - there is only
one commit going on at a time.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: Fix theoretical division by 0 in super_cache_scan().

commit 475d0db742e3755c6b267f48577ff7cbb7dfda0d upstream.

total_objects could be 0 and is used as a denom.

While total_objects is a "long", total_objects == 0 unlikely happens for
3.12 and later kernels because 32-bit architectures would not be able to
hold (1 << 32) objects. However, total_objects == 0 may happen for kernels
between 3.1 and 3.11 because total_objects in prune_super() was an "int"
and (e.g.) x86_64 architecture might be able to hold (1 << 32) objects.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: make cont_expand_zero interruptible

commit c2ca0fcd202863b14bd041a7fece2e789926c225 upstream.

This patch makes it possible to kill a process looping in
cont_expand_zero. A process may spend a lot of time in this function, so
it is desirable to be able to kill it.

It happened to me that I wanted to copy a piece data from the disk to a
file. By mistake, I used the "seek" parameter to dd instead of "skip". Due
to the "seek" parameter, dd attempted to extend the file and became stuck
doing so - the only possibility was to reset the machine or wait many
hours until the filesystem runs out of space and cont_expand_zero fails.
We need this patch to be able to terminate the process.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: rtsx_pci_sdmmc: fix incorrect last byte in R2 response

commit d1419d50c1bf711e9fd27b516a739c86b23f7cf9 upstream.

Current code erroneously fill the last byte of R2 response with an undefined
value. In addition, the controller actually 'offloads' the last byte
(CRC7, end bit) while receiving R2 response and thus it's impossible to get the
actual value. This could cause mmc stack to obtain inconsistent CID from the
same card after resume and misidentify it as a different card.

Fix by assigning dummy CRC and end bit: {7'b0, 1} = 0x1 to the last byte of R2.

Fixes: ff984e57d36e ("mmc: Add realtek pcie sdmmc host driver")
Signed-off-by: Roger Tseng <rogerable@realtek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

libata-sff: Fix controllers with no ctl port

commit 6d8ca28fa688a9354bc9fbc935bdaeb3651b6677 upstream.

Currently, ata_sff_softreset is skipped for controllers with no ctl port.
But that also skips ata_sff_dev_classify required for device detection.
This means that libata is currently broken on controllers with no ctl port.

No device connected:
[    1.872480] pata_isapnp 01:01.02: activated
[    1.889823] scsi2 : pata_isapnp
[    1.890109] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11
[    6.888110] ata3.01: qc timeout (cmd 0xec)
[    6.888179] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[   16.888085] ata3.01: qc timeout (cmd 0xec)
[   16.888147] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[   46.888086] ata3.01: qc timeout (cmd 0xec)
[   46.888148] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[   51.888100] ata3.00: qc timeout (cmd 0xec)
[   51.888160] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[   61.888079] ata3.00: qc timeout (cmd 0xec)
[   61.888141] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5)
[   91.888089] ata3.00: qc timeout (cmd 0xec)
[   91.888152] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x5)

ATAPI device connected:
[    1.882061] pata_isapnp 01:01.02: activated
[    1.893430] scsi2 : pata_isapnp
[    1.893719] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11
[    6.892107] ata3.01: qc timeout (cmd 0xec)
[    6.892171] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[   16.892079] ata3.01: qc timeout (cmd 0xec)
[   16.892138] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[   46.892079] ata3.01: qc timeout (cmd 0xec)
[   46.892138] ata3.01: failed to IDENTIFY (I/O error, err_mask=0x5)
[   46.908586] ata3.00: ATAPI: ACER CD-767E/O, V1.5X, max PIO2, CDB intr
[   46.924570] ata3.00: configured for PIO0 (device error ignored)
[   46.926295] scsi 2:0:0:0: CD-ROM            ACER     CD-767E/O        1.5X PQ: 0 ANSI: 5
[   46.984519] sr0: scsi3-mmc drive: 6x/6x xa/form2 tray
[   46.984592] cdrom: Uniform CD-ROM driver Revision: 3.20

So don't skip ata_sff_softreset, just skip the reset part of ata_bus_softreset
if the ctl port is not available.

This makes IDE port on ES968 behave correctly:

No device connected:
[    4.670888] pata_isapnp 01:01.02: activated
[    4.673207] scsi host2: pata_isapnp
[    4.673675] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11
[    7.081840] Adding 2541652k swap on /dev/sda2.  Priority:-1 extents:1 across:2541652k

ATAPI device connected:
[    4.704362] pata_isapnp 01:01.02: activated
[    4.706620] scsi host2: pata_isapnp
[    4.706877] ata3: PATA max PIO0 cmd 0x1e8 ctl 0x0 irq 11
[    4.872782] ata3.00: ATAPI: ACER CD-767E/O, V1.5X, max PIO2, CDB intr
[    4.888673] ata3.00: configured for PIO0 (device error ignored)
[    4.893984] scsi 2:0:0:0: CD-ROM            ACER     CD-767E/O        1.5X PQ: 0 ANSI: 5
[    7.015578] Adding 2541652k swap on /dev/sda2.  Priority:-1 extents:1 across:2541652k

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller

commit 37017ac6849e772e67dd187ba2fbd056c4afa533 upstream.

The Broadcom OSB4 IDE Controller (vendor and device IDs: 1166:0211)
does not support 64-KB DMA transfers.
Whenever a 64-KB DMA transfer is attempted,
the transfer fails and messages similar to the following
are written to the console log:

   [ 2431.851125] sr 0:0:0:0: [sr0] Unhandled sense code
   [ 2431.851139] sr 0:0:0:0: [sr0]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
   [ 2431.851152] sr 0:0:0:0: [sr0]  Sense Key : Hardware Error [current]
   [ 2431.851166] sr 0:0:0:0: [sr0]  Add. Sense: Logical unit communication time-out
   [ 2431.851182] sr 0:0:0:0: [sr0] CDB: Read(10): 28 00 00 00 76 f4 00 00 40 00
   [ 2431.851210] end_request: I/O error, dev sr0, sector 121808

When the libata and pata_serverworks modules
are recompiled with ATA_DEBUG and ATA_VERBOSE_DEBUG defined in libata.h,
the 64-KB transfer size in the scatter-gather list can be seen
in the console log:

   [ 2664.897267] sr 9:0:0:0: [sr0] Send:
   [ 2664.897274] 0xf63d85e0
   [ 2664.897283] sr 9:0:0:0: [sr0] CDB:
   [ 2664.897288] Read(10): 28 00 00 00 7f b4 00 00 40 00
   [ 2664.897319] buffer = 0xf6d6fbc0, bufflen = 131072, queuecommand 0xf81b7700
   [ 2664.897331] ata_scsi_dump_cdb: CDB (1:0,0,0) 28 00 00 00 7f b4 00 00 40
   [ 2664.897338] ata_scsi_translate: ENTER
   [ 2664.897345] ata_sg_setup: ENTER, ata1
   [ 2664.897356] ata_sg_setup: 3 sg elements mapped
   [ 2664.897364] ata_bmdma_fill_sg: PRD[0] = (0x66FD2000, 0xE000)
   [ 2664.897371] ata_bmdma_fill_sg: PRD[1] = (0x65000000, 0x10000)
   ------------------------------------------------------> =======
   [ 2664.897378] ata_bmdma_fill_sg: PRD[2] = (0x66A10000, 0x2000)
   [ 2664.897386] ata1: ata_dev_select: ENTER, device 0, wait 1
   [ 2664.897422] ata_sff_tf_load: feat 0x1 nsect 0x0 lba 0x0 0x0 0xFC
   [ 2664.897428] ata_sff_tf_load: device 0xA0
   [ 2664.897448] ata_sff_exec_command: ata1: cmd 0xA0
   [ 2664.897457] ata_scsi_translate: EXIT
   [ 2664.897462] leaving scsi_dispatch_cmnd()
   [ 2664.897497] Doing sr request, dev = sr0, block = 0
   [ 2664.897507] sr0 : reading 64/256 512 byte blocks.
   [ 2664.897553] ata_sff_hsm_move: ata1: protocol 7 task_state 1 (dev_stat 0x58)
   [ 2664.897560] atapi_send_cdb: send cdb
   [ 2666.910058] ata_bmdma_port_intr: ata1: host_stat 0x64
   [ 2666.910079] __ata_sff_port_intr: ata1: protocol 7 task_state 3
   [ 2666.910093] ata_sff_hsm_move: ata1: protocol 7 task_state 3 (dev_stat 0x51)
   [ 2666.910101] ata_sff_hsm_move: ata1: protocol 7 task_state 4 (dev_stat 0x51)
   [ 2666.910129] sr 9:0:0:0: [sr0] Done:
   [ 2666.910136] 0xf63d85e0 TIMEOUT

lspci shows that the driver used for the Broadcom OSB4 IDE Controller is
pata_serverworks:

   00:0f.1 IDE interface: Broadcom OSB4 IDE Controller (prog-if 8e [Master SecP SecO PriP])
           Flags: bus master, medium devsel, latency 64
           [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
           [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
           I/O ports at 0170 [size=8]
           I/O ports at 0374 [size=4]
           I/O ports at 1440 [size=16]
           Kernel driver in use: pata_serverworks

The pata_serverworks driver supports five distinct device IDs,
one being the OSB4 and the other four belonging to the CSB series.
The CSB series appears to support 64-KB DMA transfers,
as tests on a machine with an SAI2 motherboard
containing a Broadcom CSB5 IDE Controller (vendor and device IDs: 1166:0212)
showed no problems with 64-KB DMA transfers.

This problem was first discovered when attempting to install openSUSE
from a DVD on a machine with an STL2 motherboard.
Using the pata_serverworks module,
older releases of openSUSE will not install at all due to the timeouts.
Releases of openSUSE prior to 11.3 can be installed by disabling
the pata_serverworks module using the brokenmodules boot parameter,
which causes the serverworks module to be used instead.
Recent releases of openSUSE (12.2 and later) include better error recovery and
will install, though very slowly.
On all openSUSE releases, the problem can be recreated
on a machine containing a Broadcom OSB4 IDE Controller
by mounting an install DVD and running a command similar to the following:

   find /mnt -type f -print | xargs cat > /dev/null

The patch below corrects the problem.
Similar to the other ATA drivers that do not support 64-KB DMA transfers,
the patch changes the ata_port_operations qc_prep vector to point to a routine
that breaks any 64-KB segment into two 32-KB segments and
changes the scsi_host_template sg_tablesize element to reduce by half
the number of scatter/gather elements allowed.
These two changes affect only the OSB4.

Signed-off-by: Scott Carter <ccscott@funsoft.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "percpu: free percpu allocation info for uniprocessor system"

commit bb2e226b3bef596dd56be97df655d857b4603923 upstream.

This reverts commit 3189eddbcafc ("percpu: free percpu allocation info for
uniprocessor system").

The commit causes a hang with a crisv32 image. This may be an architecture
problem, but at least for now the revert is necessary to be able to boot a
crisv32 image.

Cc: Tejun Heo <tj@kernel.org>
Cc: Honggang Li <enjoymindful@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 3189eddbcafc ("percpu: free percpu allocation info for uniprocessor system")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lockd: Try to reconnect if statd has moved

commit 173b3afceebe76fa2205b2c8808682d5b541fe3c upstream.

If rpc.statd is restarted, upcalls to monitor hosts can fail with
ECONNREFUSED. In that case force a lookup of statd's new port and retry the
upcall.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/net: macvtap and tun depend on INET

[ Upstream commit de11b0e8c569b96c2cf6a811e3805b7aeef498a3 ]

These drivers now call ipv6_proxy_select_ident(), which is defined
only if CONFIG_INET is enabled. However, they have really depended
on CONFIG_INET for as long as they have allowed sending GSO packets
from userland.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: f43798c27684 ("tun: Allow GSO using virtio_net_hdr")
Fixes: b9fb9ee07e67 ("macvtap: add GSO/csum offload support")
Fixes: 5188cd44c55d ("drivers/net, ipv6: Select IPv6 fragment idents for virtio UFO packets")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: dst_entry leak in ip_send_unicast_reply()

[ Upstream commit 4062090e3e5caaf55bed4523a69f26c3265cc1d2 ]

ip_setup_cork() called inside ip_append_data() steals dst entry from rt to cork
and in case errors in __ip_append_data() nobody frees stolen dst entry

Fixes: 2e77d89b2fa8 ("net: avoid a pair of dst_hold()/dst_release() in ip_append_data()")
Signed-off-by: Vasily Averin <vvs@parallels.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ax88179_178a: fix bonding failure

[ Upstream commit 95ff88688781db2f64042e69bd499e518bbb36e5 ]

The following patch fixes a bug which causes the ax88179_178a driver to be
incapable of being added to a bond.

When I brought up the issue with the bonding maintainers, they indicated
that the real problem was with the NIC driver which must return zero for
success (of setting the MAC address). I see that several other NIC drivers
follow that pattern by either simply always returing zero, or by passing
through a negative (error) result while rewriting any positive return code
to zero. With that same philisophy applied to the ax88179_178a driver, it
allows it to work correctly with the bonding driver.

I believe this is suitable for queuing in -stable, as it's a small, simple,
and obvious fix that corrects a defect with no other known workaround.

This patch is against vanilla 3.17(.0).

Signed-off-by: Ian Morgan <imorgan@primordial.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv4: fix nexthop attlen check in fib_nh_match

[ Upstream commit f76936d07c4eeb36d8dbb64ebd30ab46ff85d9f7 ]

fib_nh_match does not match nexthops correctly. Example:

ip route add 172.16.10/24 nexthop via 192.168.122.12 dev eth0 \
nexthop via 192.168.122.13 dev eth0
ip route del 172.16.10/24 nexthop via 192.168.122.14 dev eth0 \
nexthop via 192.168.122.15 dev eth0

Del command is successful and route is removed. After this patch
applied, the route is correctly matched and result is:
RTNETLINK answers: No such process

Please consider this for stable trees as well.

Fixes: 4e902c57417c4 ("[IPv4]: FIB configuration using struct fib_config")
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/syscalls: Ignore numbers outside NR_syscalls' range

commit 086ba77a6db00ed858ff07451bedee197df868c9 upstream.

ARM has some private syscalls (for example, set_tls(2)) which lie
outside the range of NR_syscalls.  If any of these are called while
syscall tracing is being performed, out-of-bounds array access will
occur in the ftrace and perf sys_{enter,exit} handlers.

# trace-cmd record -e raw_syscalls:* true && trace-cmd report
...
true-653   [000]   384.675777: sys_enter:            NR 192 (0, 1000, 3, 4000022, ffffffff, 0)
true-653   [000]   384.675812: sys_exit:             NR 192 = 1995915264
true-653   [000]   384.675971: sys_enter:            NR 983045 (76f74480, 76f74000, 76f74b28, 76f74480, 76f76f74, 1)
true-653   [000]   384.675988: sys_exit:             NR 983045 = 0
...

# trace-cmd record -e syscalls:* true
[   17.289329] Unable to handle kernel paging request at virtual address aaaaaace
[   17.289590] pgd = 9e71c000
[   17.289696] [aaaaaace] *pgd=00000000
[   17.289985] Internal error: Oops: 5 [#1] PREEMPT SMP ARM
[   17.290169] Modules linked in:
[   17.290391] CPU: 0 PID: 704 Comm: true Not tainted 3.18.0-rc2+ #21
[   17.290585] task: 9f4dab00 ti: 9e710000 task.ti: 9e710000
[   17.290747] PC is at ftrace_syscall_enter+0x48/0x1f8
[   17.290866] LR is at syscall_trace_enter+0x124/0x184

Fix this by ignoring out-of-NR_syscalls-bounds syscall numbers.

Commit cd0980fc8add "tracing: Check invalid syscall nr while tracing syscalls"
added the check for less than zero, but it should have also checked
for greater than NR_syscalls.

Link: http://lkml.kernel.org/p/1414620418-29472-1-git-send-email-rabin@rab.in
Fixes: cd0980fc8add "tracing: Check invalid syscall nr while tracing syscalls"
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.10.59

ecryptfs: avoid to access NULL pointer when write metadata in xattr

commit 35425ea2492175fd39f6116481fe98b2b3ddd4ca upstream.

Christopher Head 2014-06-28 05:26:20 UTC described:
"I tried to reproduce this on 3.12.21. Instead, when I do "echo hello > foo"
in an ecryptfs mount with ecryptfs_xattr specified, I get a kernel crash:

BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffff8110eb39>] fsstack_copy_attr_all+0x2/0x61
PGD d7840067 PUD b2c3c067 PMD 0
Oops: 0002 [#1] SMP
Modules linked in: nvidia(PO)
CPU: 3 PID: 3566 Comm: bash Tainted: P           O 3.12.21-gentoo-r1 #2
Hardware name: ASUSTek Computer Inc. G60JX/G60JX, BIOS 206 03/15/2010
task: ffff8801948944c0 ti: ffff8800bad70000 task.ti: ffff8800bad70000
RIP: 0010:[<ffffffff8110eb39>]  [<ffffffff8110eb39>] fsstack_copy_attr_all+0x2/0x61
RSP: 0018:ffff8800bad71c10  EFLAGS: 00010246
RAX: 00000000000181a4 RBX: ffff880198648480 RCX: 0000000000000000
RDX: 0000000000000004 RSI: ffff880172010450 RDI: 0000000000000000
RBP: ffff880198490e40 R08: 0000000000000000 R09: 0000000000000000
R10: ffff880172010450 R11: ffffea0002c51e80 R12: 0000000000002000
R13: 000000000000001a R14: 0000000000000000 R15: ffff880198490e40
FS:  00007ff224caa700(0000) GS:ffff88019fcc0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000bb07f000 CR4: 00000000000007e0
Stack:
ffffffff811826e8 ffff8800a39d8000 0000000000000000 000000000000001a
ffff8800a01d0000 ffff8800a39d8000 ffffffff81185fd5 ffffffff81082c2c
00000001a39d8000 53d0abbc98490e40 0000000000000037 ffff8800a39d8220
Call Trace:
[<ffffffff811826e8>] ? ecryptfs_setxattr+0x40/0x52
[<ffffffff81185fd5>] ? ecryptfs_write_metadata+0x1b3/0x223
[<ffffffff81082c2c>] ? should_resched+0x5/0x23
[<ffffffff8118322b>] ? ecryptfs_initialize_file+0xaf/0xd4
[<ffffffff81183344>] ? ecryptfs_create+0xf4/0x142
[<ffffffff810f8c0d>] ? vfs_create+0x48/0x71
[<ffffffff810f9c86>] ? do_last.isra.68+0x559/0x952
[<ffffffff810f7ce7>] ? link_path_walk+0xbd/0x458
[<ffffffff810fa2a3>] ? path_openat+0x224/0x472
[<ffffffff810fa7bd>] ? do_filp_open+0x2b/0x6f
[<ffffffff81103606>] ? __alloc_fd+0xd6/0xe7
[<ffffffff810ee6ab>] ? do_sys_open+0x65/0xe9
[<ffffffff8157d022>] ? system_call_fastpath+0x16/0x1b
RIP  [<ffffffff8110eb39>] fsstack_copy_attr_all+0x2/0x61
RSP <ffff8800bad71c10>
CR2: 0000000000000000
---[ end trace df9dba5f1ddb8565 ]---"

If we create a file when we mount with ecryptfs_xattr_metadata option, we will
encounter a crash in this path:
->ecryptfs_create
  ->ecryptfs_initialize_file
    ->ecryptfs_write_metadata
      ->ecryptfs_write_metadata_to_xattr
        ->ecryptfs_setxattr
          ->fsstack_copy_attr_all
It's because our dentry->d_inode used in fsstack_copy_attr_all is NULL, and it
will be initialized when ecryptfs_initialize_file finish.

So we should skip copying attr from lower inode when the value of ->d_inode is
invalid.

Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: at91/PMC: don't forget to write PMC_PCDR register to disable clocks

commit cfa1950e6c6b72251e80adc736af3c3d2907ab0e upstream.

When introducing support for sama5d3, the write to PMC_PCDR register has
been accidentally removed.

Reported-by: Nathalie Cyrille <nathalie.cyrille@atmel.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add support for Steinberg UR22 USB interface

commit f0b127fbfdc8756eba7437ab668f3169280bd358 upstream.

Adding support for Steinberg UR22 USB interface via quirks table patch

See Ubuntu bug report:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1317244
Also see threads:
http://linux-audio.4202.n7.nabble.com/Support-for-Steinberg-UR22-Yamaha-USB-chipset-0499-1509-tc82888.html#a82917
http://www.steinberg.net/forums/viewtopic.php?t=62290

Tested by at least 4 people judging by the threads.
Did not test MIDI interface, but audio output and capture both are
functional. Built 3.17 kernel with this driver on Ubuntu 14.04 & tested with mpg123
Patch applied to 3.13 Ubuntu kernel works well enough for daily use.

Signed-off-by: Vlad Catoi <vladcatoi@gmail.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: emu10k1: Fix deadlock in synth voice lookup

commit 95926035b187cc9fee6fb61385b7da9c28123f74 upstream.

The emu10k1 voice allocator takes voice_lock spinlock. When there is
no empty stream available, it tries to release a voice used by synth,
and calls get_synth_voice. The callback function,
snd_emu10k1_synth_get_voice(), however, also takes the voice_lock,
thus it deadlocks.

The fix is simply removing the voice_lock holds in
snd_emu10k1_synth_get_voice(), as this is always called in the
spinlock context.

Reported-and-tested-by: Arthur Marsh <arthur.marsh@internode.on.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: use the same dma mmap codepath both for arm and arm64

commit a011e213f3700233ed2a676f1ef0a74a052d7162 upstream.

This avoids following kernel crash when try to playback on arm64

[  107.497203] [<ffffffc00046b310>] snd_pcm_mmap_data_fault+0x90/0xd4
[  107.503405] [<ffffffc0001541ac>] __do_fault+0xb0/0x498
[  107.508565] [<ffffffc0001576a0>] handle_mm_fault+0x224/0x7b0
[  107.514246] [<ffffffc000092640>] do_page_fault+0x11c/0x310
[  107.519738] [<ffffffc000081100>] do_mem_abort+0x38/0x98

Tested: backported to 3.14 and tried to playback on arm64 machine

Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: compat: fix compat types affecting struct compat_elf_prpsinfo

commit 971a5b6fe634bb7b617d8c5f25b6a3ddbc600194 upstream.

The compat_elf_prpsinfo structure does not match the arch/arm struct
elf_pspsinfo definition. As result NT_PRPSINFO note in core file
created by arm64 kernel for aarch32 (compat) process has wrong size.
So gdb cannot display command that caused process crash.

Fix is to change size of __compat_uid_t, __compat_gid_t so it would
match size of similar fields in arch/arm case.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: dw-mid: terminate ongoing transfers at exit

commit 8e45ef682cb31fda62ed4eeede5d9745a0a1b1e2 upstream.

Do full clean up at exit, means terminate all ongoing DMA transfers.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel: add support for gcc 5

commit 71458cfc782eafe4b27656e078d379a34e472adf upstream.

We're missing include/linux/compiler-gcc5.h which is required now
because gcc branched off to v5 in trunk.

Just copy the relevant bits out of include/linux/compiler-gcc4.h,
no new code is added as of now.

This fixes a build error when using gcc 5.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fanotify: enable close-on-exec on events' fd when requested in fanotify_init()

commit 0b37e097a648aa71d4db1ad108001e95b69a2da4 upstream.

According to commit 80af258867648 ("fanotify: groups can specify their
f_flags for new fd"), file descriptors created as part of file access
notification events inherit flags from the event_f_flags argument passed
to syscall fanotify_init(2)[1].

Unfortunately O_CLOEXEC is currently silently ignored.

Indeed, event_f_flags are only given to dentry_open(), which only seems to
care about O_ACCMODE and O_PATH in do_dentry_open(), O_DIRECT in
open_check_o_direct() and O_LARGEFILE in generic_file_open().

It's a pity, since, according to some lookup on various search engines and
http://codesearch.debian.net/, there's already some userspace code which
use O_CLOEXEC:

- in systemd's readahead[2]:

    fanotify_fd = fanotify_init(FAN_CLOEXEC|FAN_NONBLOCK, O_RDONLY|O_LARGEFILE|O_CLOEXEC|O_NOATIME);

- in clsync[3]:

    #define FANOTIFY_EVFLAGS (O_LARGEFILE|O_RDONLY|O_CLOEXEC)

    int fanotify_d = fanotify_init(FANOTIFY_FLAGS, FANOTIFY_EVFLAGS);

- in examples [4] from "Filesystem monitoring in the Linux
  kernel" article[5] by Aleksander Morgado:

    if ((fanotify_fd = fanotify_init (FAN_CLOEXEC,
                                      O_RDONLY | O_CLOEXEC | O_LARGEFILE)) < 0)

Additionally, since commit 48149e9d3a7e ("fanotify: check file flags
passed in fanotify_init").  having O_CLOEXEC as part of fanotify_init()
second argument is expressly allowed.

So it seems expected to set close-on-exec flag on the file descriptors if
userspace is allowed to request it with O_CLOEXEC.

But Andrew Morton raised[6] the concern that enabling now close-on-exec
might break existing applications which ask for O_CLOEXEC but expect the
file descriptor to be inherited across exec().

In the other hand, as reported by Mihai Dontu[7] close-on-exec on the file
descriptor returned as part of file access notify can break applications
due to deadlock.  So close-on-exec is needed for most applications.

More, applications asking for close-on-exec are likely expecting it to be
enabled, relying on O_CLOEXEC being effective.  If not, it might weaken
their security, as noted by Jan Kara[8].

So this patch replaces call to macro get_unused_fd() by a call to function
get_unused_fd_flags() with event_f_flags value as argument.  This way
O_CLOEXEC flag in the second argument of fanotify_init(2) syscall is
interpreted and close-on-exec get enabled when requested.

[1] http://man7.org/linux/man-pages/man2/fanotify_init.2.html
[2] http://cgit.freedesktop.org/systemd/systemd/tree/src/readahead/readahead-collect.c?id=v208#n294
[3] https://github.com/xaionaro/clsync/blob/v0.2.1/sync.c#L1631
    https://github.com/xaionaro/clsync/blob/v0.2.1/configuration.h#L38
[4] http://www.lanedo.com/~aleksander/fanotify/fanotify-example.c
[5] http://www.lanedo.com/2013/filesystem-monitoring-linux-kernel/
[6] http://lkml.kernel.org/r/20141001153621.65e9258e65a6167bf2e4cb50@linux-foundation.org
[7] http://lkml.kernel.org/r/20141002095046.3715eb69@mdontu-l
[8] http://lkml.kernel.org/r/20141002104410.GB19748@quack.suse.cz

Link: http://lkml.kernel.org/r/cover.1411562410.git.ydroneaud@opteya.com
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Mihai Don\u021bu <mihai.dontu@gmail.com>
Cc: Pádraig Brady <P@draigBrady.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Cc: Michael Kerrisk-manpages <mtk.manpages@gmail.com>
Cc: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Cc: Richard Guy Briggs <rgb@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: clear __GFP_FS when PF_MEMALLOC_NOIO is set

commit 934f3072c17cc8886f4c043b47eeeb1b12f8de33 upstream.

commit 21caf2fc1931 ("mm: teach mm by current context info to not do I/O
during memory allocation") introduces PF_MEMALLOC_NOIO flag to avoid doing
I/O inside memory allocation, __GFP_IO is cleared when this flag is set,
but __GFP_FS implies __GFP_IO, it should also be cleared.  Or it may still
run into I/O, like in superblock shrinker.  And this will make the kernel
run into the deadlock case described in that commit.

See Dave Chinner's comment about io in superblock shrinker:

Filesystem shrinkers do indeed perform IO from the superblock shrinker and
have for years.  Even clean inodes can require IO before they can be freed
- e.g.  on an orphan list, need truncation of post-eof blocks, need to
wait for ordered operations to complete before it can be freed, etc.

IOWs, Ext4, btrfs and XFS all can issue and/or block on arbitrary amounts
of IO in the superblock shrinker context.  XFS, in particular, has been
doing transactions and IO from the VFS inode cache shrinker since it was
first introduced....

Fix this by clearing __GFP_FS in memalloc_noio_flags(), this function has
masked all the gfp_mask that will be passed into fs for the processes
setting PF_MEMALLOC_NOIO in the direct reclaim path.

v1 thread at: https://lkml.org/lkml/2014/9/3/32

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: joyce.xue <xuejiufei@huawei.com>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix issue with USB suspend in btusb driver

commit 85560c4a828ec9c8573840c9b66487b6ae584768 upstream.

Suspend could fail for some platforms because
btusb_suspend==> btusb_stop_traffic ==> usb_kill_anchored_urbs.

When btusb_bulk_complete returns before system suspend and resubmits
an URB, the system cannot enter suspend state.

Signed-off-by: Champion Chen <champion_chen@realsil.com.cn>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix HCI H5 corrupted ack value

commit 4807b51895dce8aa650ebebc51fa4a795ed6b8b8 upstream.

In this expression: seq = (seq - 1) % 8
seq (u8) is implicitly converted to an int in the arithmetic operation.
So if seq value is 0, operation is ((0 - 1) % 8) => (-1 % 8) => -1.
The new seq value is 0xff which is an invalid ACK value, we expect 0x07.
It leads to frequent dropped ACK and retransmission.
Fix this by using '&' binary operator instead of '%'.

Signed-off-by: Loic Poulain <loic.poulain@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rt2800: correct BBP1_TX_POWER_CTRL mask

commit 01f7feeaf4528bec83798316b3c811701bac5d3e upstream.

Two bits control TX power on BBP_R1 register. Correct the mask,
otherwise we clear additional bit on BBP_R1 register, what can have
unknown, possible negative effect.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Generate uppercase hex for modalias interface class

commit 89ec3dcf17fd3fa009ecf8faaba36828dd6bc416 upstream.

Some implementations of modprobe fail to load the driver for a PCI device
automatically because the "interface" part of the modalias from the kernel
is lowercase, and the modalias from file2alias is uppercase.

The "interface" is the low-order byte of the Class Code, defined in PCI
r3.0, Appendix D. Most interface types defined in the spec do not use
alpha characters, so they won't be affected. For example, 00h, 01h, 10h,
20h, etc. are unaffected.

Print the "interface" byte of the Class Code in uppercase hex, as we
already do for the Vendor ID, Device ID, Class, etc.

[bhelgaas: changelog]
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Increase IBM ipr SAS Crocodile BARs to at least system page size

commit 9fe373f9997b48fcd6222b95baf4a20c134b587a upstream.

The Crocodile chip occasionally comes up with 4k and 8k BAR sizes. Due to
an erratum, setting the SR-IOV page size causes the physical function BARs
to expand to the system page size. Since ppc64 uses 64k pages, when Linux
tries to assign the smaller resource sizes to the now 64k BARs the address
will be truncated and the BARs will overlap.

Force Linux to allocate the resource as a full page, which avoids the
overlap.

[bhelgaas: print expanded resource, too]
Signed-off-by: Douglas Lehr <dllehr@us.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: Add missing PCI IDs for the 7260 series

commit 4f08970f5284dce486f0e2290834aefb2a262189 upstream.

Add 4 missing PCI IDs for the 7260 series.

Signed-off-by: Oren Givon <oren.givon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4.1: Fix an NFSv4.1 state renewal regression

commit d1f456b0b9545f1606a54cd17c20775f159bd2ce upstream.

Commit 2f60ea6b8ced ("NFSv4: The NFSv4.0 client must send RENEW calls if it holds a delegation") set the NFS4_RENEW_TIMEOUT flag in nfs4_renew_state, and does
not put an nfs41_proc_async_sequence call, the NFSv4.1 lease renewal heartbeat
call, on the wire to renew the NFSv4.1 state if the flag was not set.

The NFS4_RENEW_TIMEOUT flag is set when "now" is after the last renewal
(cl_last_renewal) plus the lease time divided by 3. This is arbitrary and
sometimes does the following:

In normal operation, the only way a future state renewal call is put on the
wire is via a call to nfs4_schedule_state_renewal, which schedules a
nfs4_renew_state workqueue task. nfs4_renew_state determines if the
NFS4_RENEW_TIMEOUT should be set, and the calls nfs41_proc_async_sequence,
which only gets sent if the NFS4_RENEW_TIMEOUT flag is set.
Then the nfs41_proc_async_sequence rpc_release function schedules
another state remewal via nfs4_schedule_state_renewal.

Without this change we can get into a state where an application stops
accessing the NFSv4.1 share, state renewal calls stop due to the
NFS4_RENEW_TIMEOUT flag _not_ being set. The only way to recover
from this situation is with a clientid re-establishment, once the application
resumes and the server has timed out the lease and so returns
NFS4ERR_BAD_SESSION on the subsequent SEQUENCE operation.

An example application:
open, lock, write a file.

sleep for 6 * lease (could be less)

ulock, close.

In the above example with NFSv4.1 delegations enabled, without this change,
there are no OP_SEQUENCE state renewal calls during the sleep, and the
clientid is recovered due to lease expiration on the close.

This issue does not occur with NFSv4.1 delegations disabled, nor with
NFSv4.0, with or without delegations enabled.

Signed-off-by: Andy Adamson <andros@netapp.com>
Link: http://lkml.kernel.org/r/1411486536-23401-1-git-send-email-andros@netapp.com
Fixes: 2f60ea6b8ced (NFSv4: The NFSv4.0 client must send RENEW calls...)
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4: fix open/lock state recovery error handling

commit df817ba35736db2d62b07de6f050a4db53492ad8 upstream.

The current open/lock state recovery unfortunately does not handle errors
such as NFS4ERR_CONN_NOT_BOUND_TO_SESSION correctly. Instead of looping,
just proceeds as if the state manager is finished recovering.
This patch ensures that we loop back, handle higher priority errors
and complete the open/lock state recovery.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFSv4: Fix lock recovery when CREATE_SESSION/SETCLIENTID_CONFIRM fails

commit a4339b7b686b4acc8b6de2b07d7bacbe3ae44b83 upstream.

If a NFSv4.x server returns NFS4ERR_STALE_CLIENTID in response to a
CREATE_SESSION or SETCLIENTID_CONFIRM in order to tell us that it rebooted
a second time, then the client will currently take this to mean that it must
declare all locks to be stale, and hence ineligible for reboot recovery.

RFC3530 and RFC5661 both suggest that the client should instead rely on the
server to respond to inelegible open share, lock and delegation reclaim
requests with NFS4ERR_NO_GRACE in this situation.

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lzo: check for length overrun in variable length encoding.

commit 72cf90124e87d975d0b2114d930808c58b4c05e4 upstream.

This fix ensures that we never meet an integer overflow while adding
255 while parsing a variable length encoding. It works differently from
commit 206a81c ("lzo: properly check for overruns") because instead of
ensuring that we don't overrun the input, which is tricky to guarantee
due to many assumptions in the code, it simply checks that the cumulated
number of 255 read cannot overflow by bounding this number.

The MAX_255_COUNT is the maximum number of times we can add 255 to a base
count without overflowing an integer. The multiply will overflow when
multiplying 255 by more than MAXINT/255. The sum will overflow earlier
depending on the base count. Since the base count is taken from a u8
and a few bits, it is safe to assume that it will always be lower than
or equal to 2*255, thus we can always prevent any overflow by accepting
two less 255 steps.

This patch also reduces the CPU overhead and actually increases performance
by 1.1% compared to the initial code, while the previous fix costs 3.1%
(measured on x86_64).

The fix needs to be backported to all currently supported stable kernels.

Reported-by: Willem Pinckaers <willem@lekkertech.net>
Cc: "Don A. Bailey" <donb@securitymouse.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "lzo: properly check for overruns"

commit af958a38a60c7ca3d8a39c918c1baa2ff7b6b233 upstream.

This reverts commit 206a81c ("lzo: properly check for overruns").

As analysed by Willem Pinckaers, this fix is still incomplete on
certain rare corner cases, and it is easier to restart from the
original code.

Reported-by: Willem Pinckaers <willem@lekkertech.net>
Cc: "Don A. Bailey" <donb@securitymouse.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation: lzo: document part of the encoding

commit d98a0526434d27e261f622cf9d2e0028b5ff1a00 upstream.

Add a complete description of the LZO format as processed by the
decompressor. I have not found a public specification of this format
hence this analysis, which will be used to better understand the code.

Cc: Willem Pinckaers <willem@lekkertech.net>
Cc: "Don A. Bailey" <donb@securitymouse.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

m68k: Disable/restore interrupts in hwreg_present()/hwreg_write()

commit e4dc601bf99ccd1c95b7e6eef1d3cf3c4b0d4961 upstream.

hwreg_present() and hwreg_write() temporarily change the VBR register to
another vector table. This table contains a valid bus error handler
only, all other entries point to arbitrary addresses.

If an interrupt comes in while the temporary table is active, the
processor will start executing at such an arbitrary address, and the
kernel will crash.

While most callers run early, before interrupts are enabled, or
explicitly disable interrupts, Finn Thain pointed out that macsonic has
one callsite that doesn't, causing intermittent boot crashes.
There's another unsafe callsite in hilkbd.

Fix this for good by disabling and restoring interrupts inside
hwreg_present() and hwreg_write().

Explicitly disabling interrupts can be removed from the callsites later.

Reported-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: Fix a bug in vmbus_open()

commit 45d727cee9e200f5b351528b9fb063b69cf702c8 upstream.

Fix a bug in vmbus_open() and properly propagate the error. I would
like to thank Dexuan Cui <decui@microsoft.com> for identifying the
issue.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: Cleanup vmbus_establish_gpadl()

commit 72c6b71c245dac8f371167d97ef471b367d0b66b upstream.

Eliminate the call to BUG_ON() by waiting for the host to respond. We are
trying to reclaim the ownership of memory that was given to the host and so
we will have to wait until the host responds.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: Cleanup vmbus_teardown_gpadl()

commit 66be653083057358724d56d817e870e53fb81ca7 upstream.

Eliminate calls to BUG_ON() by properly handling errors. In cases where
rollback is possible, we will return the appropriate error to have the
calling code decide how to rollback state. In the case where we are
transferring ownership of the guest physical pages to the host,
we will wait for the host to respond.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: Cleanup vmbus_post_msg()

commit fdeebcc62279119dbeafbc1a2e39e773839025fd upstream.

Posting messages to the host can fail because of transient resource
related failures. Correctly deal with these failures and increase the
number of attempts to post the message before giving up.

In this version of the patch, I have normalized the error code to
Linux error code.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware_class: make sure fw requests contain a name

commit 471b095dfe0d693a8d624cbc716d1ee4d74eb437 upstream.

An empty firmware request name will trigger warnings when building
device names. Make sure this is caught earlier and rejected.

The warning was visible via the test_firmware.ko module interface:

echo -ne "\x00" > /sys/devices/virtual/misc/test_firmware/trigger_request

Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qla2xxx: Use correct offset to req-q-out for reserve calculation

commit 75554b68ac1e018bca00d68a430b92ada8ab52dd upstream.

Signed-off-by: Arun Easi <arun.easi@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptfusion: enable no_write_same for vmware scsi disks

commit 4089b71cc820a426d601283c92fcd4ffeb5139c2 upstream.

When using a virtual SCSI disk in a VMWare VM if blkdev_issue_zeroout is used
data can be improperly zeroed out using the mptfusion driver. This patch
disables write_same for this driver and the vmware subsystem_vendor which
ensures that manual zeroing out is used instead.

BugLink: http://bugs.launchpad.net/bugs/1371591
Reported-by: Bruce Lucas <bruce.lucas@mongodb.com>
Tested-by: Chris J Arges <chris.j.arges@canonical.com>
Signed-off-by: Chris J Arges <chris.j.arges@canonical.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

be2iscsi: check ip buffer before copying

commit a41a9ad3bbf61fae0b6bfb232153da60d14fdbd9 upstream.

Dan Carpenter found a issue where be2iscsi would copy the ip
from userspace to the driver buffer before checking the len
of the data being copied:
http://marc.info/?l=linux-scsi&m=140982651504251&w=2

This patch just has us only copy what we the driver buffer
can support.

Tested-by: John Soni Jose <sony.john-n@emulex.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regmap: fix NULL pointer dereference in _regmap_write/read

commit 5336be8416a71b5568d2cf54a2f2066abe9f2a53 upstream.

If LOG_DEVICE is defined and map->dev is NULL it will lead to NULL
pointer dereference. This patch fixes this issue by adding check for
dev->NULL in all such places in regmap.c

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regmap: debugfs: fix possbile NULL pointer dereference

commit 2c98e0c1cc6b8e86f1978286c3d4e0769ee9d733 upstream.

If 'map->dev' is NULL and there will lead dev_name() to be NULL pointer
dereference. So before dev_name(), we need to have check of the map->dev
pionter.

We also should make sure that the 'name' pointer shouldn't be NULL for
debugfs_create_dir(). So here using one default "dummy" debugfs name when
the 'name' pointer and 'map->dev' are both NULL.

Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: dw-mid: check that DMA was inited before exit

commit fb57862ead652454ceeb659617404c5f13bc34b5 upstream.

If the driver was compiled with DMA support, but DMA channels weren't acquired
by some reason, mid_spi_dma_exit() will crash the kernel.

Fixes: 7063c0d942a1 (spi/dw_spi: add DMA support)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: dw-mid: respect 8 bit mode

commit b41583e7299046abdc578c33f25ed83ee95b9b31 upstream.

In case of 8 bit mode and DMA usage we end up with every second byte written as
0. We have to respect bits_per_word settings what this patch actually does.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/intel/quark: Switch off CR4.PGE so TLB flush uses CR3 instead

commit ee1b5b165c0a2f04d2107e634e51f05d0eb107de upstream.

Quark x1000 advertises PGE via the standard CPUID method
PGE bits exist in Quark X1000's PTEs. In order to flush
an individual PTE it is necessary to reload CR3 irrespective
of the PTE.PGE bit.

See Quark Core_DevMan_001.pdf section 6.4.11

This bug was fixed in Galileo kernels, unfixed vanilla kernels are expected to
crash and burn on this platform.

Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Borislav Petkov <bp@alien8.de>
Link: http://lkml.kernel.org/r/1411514784-14885-1-git-send-email-pure.logic@nexus-software.ie
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: don't take vcpu mutex for obviously invalid vcpu ioctls

commit 2ea75be3219571d0ec009ce20d9971e54af96e09 upstream.

vcpu ioctls can hang the calling thread if issued while a vcpu is running.
However, invalid ioctls can happen when userspace tries to probe the kind
of file descriptors (e.g. isatty() calls ioctl(TCGETS)); in that case,
we know the ioctl is going to be rejected as invalid anyway and we can
fail before trying to take the vcpu mutex.

This patch does not change functionality, it just makes invalid ioctls
fail faster.

Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: unintended fallthrough for external call

commit f346026e55f1efd3949a67ddd1dcea7c1b9a615e upstream.

We must not fallthrough if the conditions for external call are not met.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm: x86: fix stale mmio cache bug

commit 56f17dd3fbc44adcdbc3340fe3988ddb833a47a7 upstream.

The following events can lead to an incorrect KVM_EXIT_MMIO bubbling
up to userspace:

(1) Guest accesses gpa X without a memory slot. The gfn is cached in
struct kvm_vcpu_arch (mmio_gfn). On Intel EPT-enabled hosts, KVM sets
the SPTE write-execute-noread so that future accesses cause
EPT_MISCONFIGs.

(2) Host userspace creates a memory slot via KVM_SET_USER_MEMORY_REGION
covering the page just accessed.

(3) Guest attempts to read or write to gpa X again. On Intel, this
generates an EPT_MISCONFIG. The memory slot generation number that
was incremented in (2) would normally take care of this but we fast
path mmio faults through quickly_check_mmio_pf(), which only checks
the per-vcpu mmio cache. Since we hit the cache, KVM passes a
KVM_EXIT_MMIO up to userspace.

This patch fixes the issue by using the memslot generation number
to validate the mmio cache.

Signed-off-by: David Matlack <dmatlack@google.com>
[xiaoguangrong: adjust the code to make it simpler for stable-tree fix.]
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Tested-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: Add a missing permission check to do_umount

commit a1480dcc3c706e309a88884723446f2e84fedd5b upstream.

Accessing do_remount_sb should require global CAP_SYS_ADMIN, but
only one of the two call sites was appropriately protected.

Fixes CVE-2014-7975.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix race in WAIT_SYNC ioctl

commit 42383020beb1cfb05f5d330cc311931bc4917a97 upstream.

We check whether transid is already committed via last_trans_committed and
then search through trans_list for pending transactions. If
last_trans_committed is updated by btrfs_commit_transaction after we check
it (there is no locking), we will fail to find the committed transaction
and return EINVAL to the caller. This has been observed occasionally by
ceph-osd (which uses this ioctl heavily).

Fix by rechecking whether the provided transid <= last_trans_committed
after the search fails, and if so return 0.

Signed-off-by: Sage Weil <sage@redhat.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix build_backref_tree issue with multiple shared blocks

commit bbe9051441effce51c9a533d2c56440df64db2d7 upstream.

Marc Merlin sent me a broken fs image months ago where it would blow up in the
upper->checked BUG_ON() in build_backref_tree.  This is because we had a
scenario like this

block a -- level 4 (not shared)
   |
block b -- level 3 (reloc block, shared)
   |
block c -- level 2 (not shared)
   |
block d -- level 1 (shared)
   |
block e -- level 0 (shared)

We go to build a backref tree for block e, we notice block d is shared and add
it to the list of blocks to lookup it's backrefs for.  Now when we loop around
we will check edges for the block, so we will see we looked up block c last
time.  So we lookup block d and then see that the block that points to it is
block c and we can just skip that edge since we've already been up this path.
The problem is because we clear need_check when we see block d (as it is shared)
we never add block b as needing to be checked.  And because block c is in our
path already we bail out before we walk up to block b and add it to the backref
check list.

To fix this we need to reset need_check if we trip over a block that doesn't
need to be checked.  This will make sure that any subsequent blocks in the path
as we're walking up afterwards are added to the list to be processed.  With this
patch I can now mount Marc's fs image and it'll complete the balance without
panicing.  Thanks,

Reported-by: Marc MERLIN <marc@merlins.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: try not to ENOSPC on log replay

commit 1d52c78afbbf80b58299e076a159617d6b42fe3c upstream.

When doing log replay we may have to update inodes, which traditionally goes
through our delayed inode stuff.  This will try to move space over from the
trans handle, but we don't reserve space in our trans handle on replay since we
don't know how much we will need, so instead we try to flush.  But because we
have a trans handle open we won't flush anything, so if we are out of reserve
space we will simply return ENOSPC.  Since we know that if an operation made it
into the log then we definitely had space before the box bought the farm then we
don't need to worry about doing this space reservation.  Use the
fs_info->log_root_recovering flag to skip the delayed inode stuff and update the
item directly.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 3.10.58

USB: cp210x: add support for Seluxit USB dongle

commit dee80ad12d2b1b304286a707fde7ab05d1fc7bab upstream.

Added the Seluxit ApS USB Serial Dongle to cp210x driver.

Signed-off-by: Andreas Bomholtz <andreas@seluxit.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: cp210x: added Ketra N1 wireless interface support

commit bfc2d7dfdd761ae3beccdb26abebe03cef042f46 upstream.

Added support for Ketra N1 wireless interface, which uses the
Silicon Labs' CP2104 USB to UART bridge with customized PID 8946.

Signed-off-by: Joe Savage <joe.savage@goketra.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>