misc: st_core: remove unreachable code

The pr_debug() will never be executed.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts: fix typo in ver_linux

Signed-off-by: Matthias Lange <matthias.lange@kernkonzept.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: mic: use common error path

Instead of calling release_firmware() on every error and then jumping
lets have a common release_firmware() in the error path.
This patch also fixes a memory leak where we missed release_firmware()
if mic_x100_load_command_line() fails.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: mic: return error directly

Instead of jumping to a label and then returning from there lets return
directly.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: mic: return error properly

If request_firmware() succeeds then rc becomes 0. After that if the test
for strcmp() fails then we were jumping to label done: and returning rc.
But rc being 0 we returned success whereas we have failed here and we
were supposed to return an error.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: mic: remove unneeded debug message

>From the error path we are printing an error message with dev_err(). No
need to print almost same message with dev_dbg().

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mic_virtio: fix a timeout loop

After the loop we test "if (!retry)" to see if we timedout.  The problem
is "retry--" is a post-op so retry will be -1 at the end of the loop.  I
have fixed this by changing it to a pre-op instead.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: mic: Fix crash when MIC reset is invoked in RESET_FAILED state

This patch fixes the following crash seen when MIC reset is invoked in
RESET_FAILED state due to device_del being called a second time on an
already deleted device:

[<ffffffff813b2295>] device_del+0x45/0x1d0
[<ffffffff813b243e>] device_unregister+0x1e/0x60
[<ffffffffa040f1c2>] scif_unregister_device+0x12/0x20 [scif_bus]
[<ffffffffa042f75a>] cosm_stop+0xaa/0xe0 [mic_cosm]
[<ffffffffa042f844>] cosm_reset_trigger_work+0x14/0x20 [mic_cosm]

The fix consists in realizing that because cosm_reset changes the
state to MIC_RESETTING, cosm_stop needs the previous state, before it
changed to MIC_RESETTING, to decide whether a hw_ops->stop had
previously been issued. This is now provided in a new cosm_device
member cdev->prev_state.

Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: pci: Add Broxton SOC support

This adds Intel(R) Trace Hub PCI ID for Broxton SOC.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: pci: Add Apollo Lake SOC support

This adds Intel(R) Trace Hub PCI ID for Apollo Lake SOC.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stm class: Prevent user-controllable allocations

Currently, the character device write method allocates a temporary buffer
for user's data, but the user's data size is not sanitized and can cause
arbitrarily large allocations via kzalloc() or an integer overflow that
will then result in overwriting kernel memory.

This patch trims the input buffer size to avoid these issues.

Reported-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stm class: Fix an off-by-one in master array allocation

Since both sw_start and sw_end are master indices, the size of array
that holds them is sw_end - sw_start + 1, which the current code gets
wrong, allocating one item less than required.

This patch corrects the allocation size, avoiding potential slab
corruption.

Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
[alexander.shishkin@linux.intel.com: re-wrote the commit message]
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stm class: Fix link list locking

Currently, the list of stm_sources linked to an stm device is protected by
a spinlock, which also means that sources' .unlink() method is called under
this spinlock. However, this method may (and does) sleep, which means
trouble.

This patch slightly reworks locking around stm::link_list so that bits that
might_sleep() are called with a mutex held instead. Modification of this
list requires both mutex and spinlock to be held, while looking at the list
can be done under either mutex or spinlock.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stm class: Fix locking in unbinding policy path

Right now, if stm device removal has to unbind from a policy (that is,
an stm device that has STP policy, gets removed), it will trigger a
nested lock on the stm device's policy mutex.

This patch fixes the problem by moving the locking from the policy
unbinding to policy removal (configfs path), where it's actually needed;
the other caller of the policy unbinding function already takes the
mutex around the call.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stm class: Select CONFIG_SRCU

The newly added STM code uses SRCU, but does not ensure that
this code is part of the kernel:

drivers/built-in.o: In function `stm_source_link_show':
include/linux/srcu.h:221: undefined reference to `__srcu_read_lock'
include/linux/srcu.h:238: undefined reference to `__srcu_read_unlock'
drivers/built-in.o: In function `stm_source_link_drop':
include/linux/srcu.h:221: undefined reference to `__srcu_read_lock'
include/linux/srcu.h:238: undefined reference to `__srcu_read_unlock'

This adds a Kconfig 'select' statement like all the other SRCU using
drivers have.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices")
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: INTEL_TH should depend on HAS_DMA

If NO_DMA=y:

    ERROR: "dma_free_coherent" [drivers/hwtracing/intel_th/intel_th_msu.ko] undefined!
    ERROR: "dma_alloc_coherent" [drivers/hwtracing/intel_th/intel_th_msu.ko] undefined!
    ERROR: "dma_supported" [drivers/hwtracing/intel_th/intel_th.ko] undefined!

Add a dependency on HAS_DMA to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stm class: Hide STM-specific options if STM is disabled

If STM=n, it doesn't make sense to ask about STM_DUMMY and
STM_SOURCE_CONSOLE support, which are not even built when enabled
anyway. Hence hide these options if STM=n.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: implementing 'cpu_id()' API

Other than plainly parsing the device tree there is no way to
know which CPU a tracer is affined to.  As such adding an
interface to lookup the CPU field enclosed in the etm_drvdata
structure that was initialised at boot time.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: removing bind/unbind options from sysfs

The coresight drivers have absolutely no control over bind and unbind
operations triggered from sysfs. The operations simply can't be
cancelled or denied event when one or several tracing sessions are
under way.  Since the memory associated to individual device is
invariably freed, the end result is a kernel crash when the path from
source to sink is travelled again as demonstrated here[1].

One solution could be to keep track of all the path (i.e tracing
session) that get created and iterate through the elements of those path
looking for the coresight device that is being removed.  This proposition
doesn't scale well since there is no upper bound on the amount of
concurrent trace session that can be created.

With the above in mind, this patch prevent devices from being unbounded
from their driver by using the driver->suppress_bind_attr option.  That way
trace sessions can be managed without fearing to loose devices.

Since device can't be removed anymore the xyz_remove() functions found in
each driver is also removed.

[1]. http://www.spinics.net/lists/arm-kernel/msg474952.html

Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: remove csdev's link from topology

In function 'coresight_unregister()', all references to the csdev that
is being taken away need to be removed from the topology.  Otherwise
building the next coresight path from source to sink may use memory
that has been released.

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: release reference taken by 'bus_find_device()'

The reference count taken by function bus_find_device() needs
to be released if a child device is found, something this patch
is adding.

Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: coresight_unregister() function cleanup

In its current form the code never frees csdev->refcnt allocated
in coresight_register().  There is also a problem with csdev->conns
that is freed before device_unregister() rather than in the device
release function.

This patch addresses both issues by moving kfree(csdev->conns) to
coresight_device_release() and freeing csdev->refcnt, also in
the same function.

Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: fixing lockdep error

On some platform the following lockdep error occurs when doing simple
manipulations:

    [   23.197021]
    [   23.198608] ======================================================
    [   23.205078] [ INFO: possible circular locking dependency detected ]
    [   23.211639] 4.4.0-rc8-00025-gbbf360b #172 Not tainted
    [   23.216918] -------------------------------------------------------
    [   23.223480] sh/858 is trying to acquire lock:
    [   23.228057]  (coresight_mutex){+.+.+.}, at: [<c0415d40>] coresight_enable+0x1c/0x1b4
    [   23.236206]
    [   23.236206] but task is already holding lock:
    [   23.242309]  (s_active#52){++++.+}, at: [<c01d4b40>] kernfs_fop_write+0x5c/0x1c0
    [   23.250122]
    [   23.250122] which lock already depends on the new lock.
    [   23.250122]
    [   23.258697]
    [   23.258697] the existing dependency chain (in reverse order) is:
    [   23.266510]
    -> #1 (s_active#52){++++.+}:
    [   23.270843]        [<c01d30ec>] __kernfs_remove+0x294/0x35c
    [   23.276672]        [<c01d3e44>] kernfs_remove_by_name_ns+0x44/0x8c
    [   23.283172]        [<c01d6318>] remove_files+0x3c/0x84
    [   23.288543]        [<c01d66b4>] sysfs_remove_group+0x48/0x9c
    [   23.294494]        [<c01d6734>] sysfs_remove_groups+0x2c/0x3c
    [   23.300506]        [<c030b658>] device_remove_attrs+0x5c/0x74
    [   23.306549]        [<c030c290>] device_del+0x110/0x218
    [   23.311950]        [<c030c3c4>] device_unregister+0x2c/0x6c
    [   23.317779]        [<c04156d8>] coresight_unregister+0x30/0x40
    [   23.323883]        [<c041a290>] etm_probe+0x228/0x2e8
    [   23.329193]        [<c02bc760>] amba_probe+0xe4/0x160
    [   23.334503]        [<c0310540>] driver_probe_device+0x23c/0x480
    [   23.340728]        [<c0310820>] __driver_attach+0x9c/0xa0
    [   23.346374]        [<c030e400>] bus_for_each_dev+0x70/0xa4
    [   23.352142]        [<c030fcf4>] driver_attach+0x24/0x28
    [   23.357604]        [<c030f86c>] bus_add_driver+0x1e0/0x278
    [   23.363372]        [<c0310d48>] driver_register+0x80/0x100
    [   23.369110]        [<c02bc508>] amba_driver_register+0x58/0x5c
    [   23.375244]        [<c0749514>] etm_driver_init+0x18/0x1c
    [   23.380889]        [<c0009918>] do_one_initcall+0xc4/0x20c
    [   23.386657]        [<c0715e7c>] kernel_init_freeable+0x160/0x208
    [   23.392974]        [<c052d7fc>] kernel_init+0x18/0xf0
    [   23.398254]        [<c0010850>] ret_from_fork+0x14/0x24
    [   23.403747]
    -> #0 (coresight_mutex){+.+.+.}:
    [   23.408447]        [<c008ed60>] lock_acquire+0xe4/0x210
    [   23.413909]        [<c0530a30>] mutex_lock_nested+0x74/0x450
    [   23.419860]        [<c0415d40>] coresight_enable+0x1c/0x1b4
    [   23.425689]        [<c0416030>] enable_source_store+0x58/0x68
    [   23.431732]        [<c030b358>] dev_attr_store+0x20/0x2c
    [   23.437286]        [<c01d55e8>] sysfs_kf_write+0x50/0x54
    [   23.442871]        [<c01d4ba8>] kernfs_fop_write+0xc4/0x1c0
    [   23.448699]        [<c015b60c>] __vfs_write+0x34/0xe4
    [   23.454040]        [<c015bf38>] vfs_write+0x98/0x174
    [   23.459228]        [<c015c7a8>] SyS_write+0x4c/0xa8
    [   23.464355]        [<c00107c0>] ret_fast_syscall+0x0/0x1c
    [   23.470031]
    [   23.470031] other info that might help us debug this:
    [   23.470031]
    [   23.478393]  Possible unsafe locking scenario:
    [   23.478393]
    [   23.484619]        CPU0                    CPU1
    [   23.489349]        ----                    ----
    [   23.494079]   lock(s_active#52);
    [   23.497497]                                lock(coresight_mutex);
    [   23.503906]                                lock(s_active#52);
    [   23.509918]   lock(coresight_mutex);
    [   23.513702]
    [   23.513702]  *** DEADLOCK ***
    [   23.513702]
    [   23.519897] 3 locks held by sh/858:
    [   23.523529]  #0:  (sb_writers#7){.+.+.+}, at: [<c015ec38>] __sb_start_write+0xa8/0xd4
    [   23.531799]  #1:  (&of->mutex){+.+...}, at: [<c01d4b38>] kernfs_fop_write+0x54/0x1c0
    [   23.539916]  #2:  (s_active#52){++++.+}, at: [<c01d4b40>] kernfs_fop_write+0x5c/0x1c0
    [   23.548156]
    [   23.548156] stack backtrace:
    [   23.552734] CPU: 0 PID: 858 Comm: sh Not tainted 4.4.0-rc8-00025-gbbf360b #172
    [   23.560302] Hardware name: Generic OMAP4 (Flattened Device Tree)
    [   23.566589] Backtrace:
    [   23.569152] [<c00154d4>] (dump_backtrace) from [<c00156d0>] (show_stack+0x18/0x1c)
    [   23.577087]  r7:ed4b8570 r6:c0936400 r5:c07ae71c r4:00000000
    [   23.583038] [<c00156b8>] (show_stack) from [<c027e69c>] (dump_stack+0x98/0xc0)
    [   23.590606] [<c027e604>] (dump_stack) from [<c008a750>] (print_circular_bug+0x21c/0x33c)
    [   23.599090]  r5:c0939d60 r4:c0936400
    [   23.602874] [<c008a534>] (print_circular_bug) from [<c008e370>] (__lock_acquire+0x1c98/0x1d88)
    [   23.611877]  r10:00000003 r9:c0fd7a5c r8:ed4b8550 r7:ed4b8570 r6:ed4b8000 r5:c0ff69e4
    [   23.620117]  r4:c0936400 r3:ed4b8550
    [   23.623901] [<c008c6d8>] (__lock_acquire) from [<c008ed60>] (lock_acquire+0xe4/0x210)
    [   23.632080]  r10:00000000 r9:00000000 r8:60000013 r7:c07cb7b4 r6:00000001 r5:00000000
    [   23.640350]  r4:00000000
    [   23.643005] [<c008ec7c>] (lock_acquire) from [<c0530a30>] (mutex_lock_nested+0x74/0x450)
    [   23.651458]  r10:ecc0bf80 r9:edbe7dcc r8:ed4b8000 r7:c0fd7a5c r6:c0415d40 r5:00000000
    [   23.659729]  r4:c07cb780
    [   23.662384] [<c05309bc>] (mutex_lock_nested) from [<c0415d40>] (coresight_enable+0x1c/0x1b4)
    [   23.671234]  r10:ecc0bf80 r9:edbe7dcc r8:ed733c00 r7:00000000 r6:ed733c00 r5:00000002
    [   23.679473]  r4:ed762140
    [   23.682128] [<c0415d24>] (coresight_enable) from [<c0416030>] (enable_source_store+0x58/0x68)
    [   23.691070]  r7:00000000 r6:ed733c00 r5:00000002 r4:ed762160
    [   23.697052] [<c0415fd8>] (enable_source_store) from [<c030b358>] (dev_attr_store+0x20/0x2c)
    [   23.705780]  r5:edbe7dc0 r4:c0415fd8
    [   23.709533] [<c030b338>] (dev_attr_store) from [<c01d55e8>] (sysfs_kf_write+0x50/0x54)
    [   23.717834]  r5:edbe7dc0 r4:c030b338
    [   23.721618] [<c01d5598>] (sysfs_kf_write) from [<c01d4ba8>] (kernfs_fop_write+0xc4/0x1c0)
    [   23.730163]  r7:00000000 r6:00000000 r5:00000002 r4:edbe7dc0
    [   23.736145] [<c01d4ae4>] (kernfs_fop_write) from [<c015b60c>] (__vfs_write+0x34/0xe4)
    [   23.744323]  r10:00000000 r9:ecc0a000 r8:c0010964 r7:ecc0bf80 r6:00000002 r5:c01d4ae4
    [   23.752593]  r4:ee385a40
    [   23.755249] [<c015b5d8>] (__vfs_write) from [<c015bf38>] (vfs_write+0x98/0x174)
    [   23.762908]  r9:ecc0a000 r8:c0010964 r7:ecc0bf80 r6:000ab0d8 r5:00000002 r4:ee385a40
    [   23.771057] [<c015bea0>] (vfs_write) from [<c015c7a8>] (SyS_write+0x4c/0xa8)
    [   23.778442]  r8:c0010964 r7:00000002 r6:000ab0d8 r5:ee385a40 r4:ee385a40
    [   23.785522] [<c015c75c>] (SyS_write) from [<c00107c0>] (ret_fast_syscall+0x0/0x1c)
    [   23.793457]  r7:00000004 r6:00000001 r5:000ab0d8 r4:00000002
    [   23.799652] coresight-etb10 54162000.etb: ETB enabled
    [   23.805084] coresight-funnel 54164000.funnel: FUNNEL inport 0 enabled
    [   23.811859] coresight-replicator 44000000.ocp:replicator: REPLICATOR enabled
    [   23.819335] coresight-funnel 54158000.funnel: FUNNEL inport 0 enabled
    [   23.826110] coresight-etm3x 5414c000.ptm: ETM tracing enabled

The locking in coresight_unregister() is not required as the only customers of
the function are drivers themselves when an initialisation failure has been
encoutered.

Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

coresight: fixing indentation problem

Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

VMCI: Use 32bit atomics for queue headers on X86_32

This change restricts the reading and setting of the head and tail
pointers on 32bit X86 to 32bit for both correctness and
performance reasons. On uniprocessor X86_32, the atomic64_read
may be implemented as a non-locked cmpxchg8b. This may result in
updates to the pointers done by the VMCI device being overwritten.
On MP systems, there is no such correctness issue, but using 32bit
atomics avoids the overhead of the locked 64bit operation. All this
is safe because the queue size on 32bit systems will never exceed
a 32bit value.

Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: Give control over how the ring access is serialized

On the channel send side, many of the VMBUS
device drivers explicity serialize access to the
outgoing ring buffer. Give more control to the
VMBUS device drivers in terms how to serialize
accesss to the outgoing ring buffer.
The default behavior will be to aquire the
ring lock to preserve the current behavior.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: Eliminate the spin lock on the read path

The function hv_ringbuffer_read() is called always on a pre-assigned
CPU. Each chnnel is bound to a specific CPU and this function is
always called on the CPU the channel is bound. There is no need to
acquire the spin lock; get rid of this overhead.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: add an API vmbus_hvsock_device_unregister()

The hvsock driver needs this API to release all the resources related
to the channel.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: add a per-channel rescind callback

This will be used by the coming hv_sock driver.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: add a hvsock flag in struct hv_driver

Only the coming hv_sock driver has a "true" value for this flag.

We treat the hvsock offers/channels as special VMBus devices.
Since the hv_sock driver handles all the hvsock offers/channels, we need to
tweak vmbus_match() for hv_sock driver, so we introduce this flag.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: define a new VMBus message type for hvsock

A function to send the type of message is also added.

The coming net/hvsock driver will use this function to proactively request
the host to offer a VMBus channel for a new hvsock connection.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: vmbus_sendpacket_ctl: hvsock: avoid unnecessary signaling

When the hvsock channel's outbound ringbuffer is full (i.e.,
hv_ringbuffer_write() returns -EAGAIN), we should avoid the unnecessary
signaling the host.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: define the new offer type for Hyper-V socket (hvsock)

A helper function is also added.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: add a helper function to set a channel's pending send size

This will be used by the coming net/hvsock driver.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: don't manipulate with clocksources on crash

clocksource_change_rating() involves mutex usage and can't be called
in interrupt context. It also makes sense to avoid doing redundant work
on crash.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: avoid scheduling in interrupt context in vmbus_initiate_unload()

We have to call vmbus_initiate_unload() on crash to make kdump work but
the crash can also be happening in interrupt (e.g. Sysrq + c results in
such) where we can't schedule or the following will happen:

[  314.905786] bad: scheduling from the idle thread!

Just skipping the wait (and even adding some random wait here) won't help:
to make host-side magic working we're supposed to receive CHANNELMSG_UNLOAD
(and actually confirm the fact that we received it) but we can't use
interrupt-base path (vmbus_isr()-> vmbus_on_msg_dpc()). Implement a simple
busy wait ignoring all the other messages and use it if we're in an
interrupt context.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: avoid infinite loop in init_vp_index()

When we pick a CPU to use for a new subchannel we try find a non-used one
on the appropriate NUMA node, we keep track of them with the
primary->alloced_cpus_in_node mask. Under normal circumstances we don't run
out of available CPUs but it is possible when we we don't initialize some
cpus in Linux, e.g. when we boot with 'nr_cpus=' limitation.

Avoid the infinite loop in init_vp_index() by checking that we still have
non-used CPUs in the alloced_cpus_in_node mask and resetting it in case
we don't.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/hv: Use include/uapi with __EXPORTED_HEADERS__

Use the local uapi headers to keep in sync with "recently" added #define's
(e.g. VSS_OP_REGISTER1).

Fixes: 3eb2094c59e8 ("Adding makefile for tools/hv")
Cc: <stable@vger.kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: Add vendor and device atttributes

Add vendor and device attributes to VMBUS devices. These will be used
by Hyper-V tools as well user-level RDMA libraries that will use the
vendor/device tuple to discover the RDMA device.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Drivers: hv: vmbus: Cleanup vmbus_set_event()

Cleanup vmbus_set_event() by inlining the hypercall to post
the event and since the return value of vmbus_set_event() is not checked,
make it void. As part of this cleanup, get rid of the function
hv_signal_event() as it is only callled from vmbus_set_event().

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

goldfish: locking bugs in goldfish_pipe_read_write()

We recently messed up the error handling here.  We can return with the
pipe->lock held or sometimes we unlock twice by mistake.

Fixes: 2f3be88237a3 ('goldfish_pipe: Pin pages to memory while copying and other cleanups')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: mic: fix incorrect use of error codes in SCIF DMA driver

The error code passed to ERR_PTR() always should be negated.  Also, the
return value of scif_add_mmu_notifier() was never checked.

Signed-off-by: Eric Biggers <ebiggers3@gmail.com>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: mic/scif: use list_next_entry instead of list_entry_next

list_next_entry has been defined in list.h, so I replace list_entry_next
with it.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: mic/scif: fix wrap around tests

Signed integer overflow is undefined.  Also I added a check for
"(offset < 0)" in scif_unregister() because that makes it match the
other conditions and because I didn't want to subtract a negative.

Fixes: ba612aa8b487 ('misc: mic: SCIF memory registration and unregistration')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: goldfish: (coding style) Rewrite comparisons to NULL as "!data->reg_base"

Rewrite comparisons to NULL "data->reg_base == NULL" as "!data->reg_base" to conform to checkpatch.

Signed-off-by: Christian Colic <colic.christian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: goldfish: (coding style) Add spaces around the "+" to conform to checkpatch

Added a space around the "+" at: "reg_base+addr2" to clear up a checkpatch check.

Signed-off-by: Christian Colic <colic.christian@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: goldfish: use div64_s64 instead of do_div

The goldfish nand driver divides a signed 64-bit number (loff_t)
in multiple places using the do_div() function. This has always
been unreliable but now produces a compiler warning (since 4.5-rc1):

goldfish/goldfish_nand.c: In function 'goldfish_nand_erase':
goldfish/goldfish_nand.c:107:91: error: comparison of distinct pointer types lacks a cast [-Werror]
goldfish/goldfish_nand.c: In function 'goldfish_nand_read_oob':
goldfish/goldfish_nand.c:145:91: error: comparison of distinct pointer types lacks a cast [-Werror]

This changes the code to the equivalent div_s64{,_rem} that
works correctly for negative numbers (which we should never
get here).

The warning has shown up on ARM allmodconfig builds after the goldfish
bus driver has become visible on ARM.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: bd2f348db503 ("goldfish: refactor goldfish platform configs")
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: split amthif client init from end of clients enumeration

The amthif FW client can appear after the end of client enumeration.
Amthif host client initialization is done now at FW client discovery
time.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: hbm: send immediate reply flag in enum request

Signal the FW that it can send an HBM enumeration answer immediately,
without waiting for FW initialization completion, meaning before
all the FW clients are ready and registered.

Organize enumeration response options to enum as a byproduct.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: bus: run rescan on me_clients list change

Since clients can be now added and removed during runtime
we need to run bus rescan whenever me_clients list is modified.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: drop reserved host client ids

The reserved host clients can be obsoleted now, a portion of the
platforms is shipped without iAMT enabled, where the reservation is not
relevant and for platforms with iAMT dynamic allocation is sufficient.
Dropping reserved ids makes enumeration more flexible and generic

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: hbm: warn about fw-initiated disconnect

The FW can initiate client disconnection only because an error
condition, hence it make sense to bump the debug message to the warning
level to have an entery in the log.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: fixed address clients for the new platforms

Enable by default connection to fixed address clients
from user-space for skylake and newer platform.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: fill file pointer in read cb for fixed address client

The read callback created from a flow control request for
a fixed address client have NULL in the file pointer.
Fill the file pointer using a data from a write callback.

This allows us to drop workaround introduced in:
commit eeabfcf5a92a ("mei: connection to fixed address clients from user-space")

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: discard replies from unconnected fixed address clients

A fixed address client in the FW doesn't have a notion of connection and
can send message after the file associated with it was already closed.
Silently discard such messages.
Add inline helpers to detect whether a message is hbm or intended for
a fixed address client

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: clean write queues and wake waiters on disconnect

Clean write and write_waiting queues in disconnect.
Requests in those queues are stale and processing will lead to
fat warnings.

In multi thread operations on disconnect and in FW disconnect case -
write/read/event waiters should end wait and return error.
Wake all waiters for disconnecting client to achieve that.

Drop wake all and write queue clean on reset,
as now we waking all waiters and cleaning write queues on disconnect.
No need to do it twice.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: wake blocked write on link reset

In case of link reset all blocked writes should be interrupted.
Note, that currently blocking write is used only through bus layer.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: drop superfluous closing bracket from write traces

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: bus: check if the device is enabled before data transfer

The bus data transfer interface was missing the check if the device is
in enabled state, this may lead to stack corruption during link reset.

Cc: <stable@vger.kernel.org> #4.0
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: bus: fix notification event delivery

Call wake_up cl->ev_wait only in case there is no bus client registered
to the event notification.
Second, since we don't have exclusive waiter wake_up_interruptible_all
is not used correctly here.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: bus: fix RX event scheduling

In this particular case this more correct and safer to check if the RX
event is set in the event mask rather than query waitqueue_active
Since the check is already performed in the mei_cl_bus_rx_event
function,  it is just required to check for its return value.
Second, since we don't have exclusive waiter wake_up_interruptible_all
is not used correctly here.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: amthif: interrupt reader on link reset

In case of link reset all waiting readers should be interrupted.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: amthif: use rx_wait queue also for amthif client

Switch using cl->rx_wait wait queue also for amthif, there is nothing
special about amthif in that matter in Rx flow.
The cl->wait is reserved for hbm flows and asynchronous events

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: amthif: drop parameter validation from mei_amthif_write

Remove duplicated parameter validation from mei_amthif_write functions,
The parameter check is already performed by the caller function
mei_write

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: amthif: replace amthif_rd_complete_list with rd_completed

Now when we have per client rd_completed list we can remove
the amthif specific amthif_rd_complete_list.
In addition in the function mei_amthif_read do not loop over the
rd_completed list like the original code as the code path is unlocked.

Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: amthif: allow only one request at a time

A next amthif write can be executed only after the previous one has
completed.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: rename variable names 'file_object' to fp

The driver uses three names file, fp, and file_object for
struct file type. To improve code clarity and adjust to my taste
rename file_object to more common and shorter fp.

Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: constify struct file pointer

The struct file file pointer is used as an opaque handle to for a
connected client, for this part the pointer should be immutable and
should be set to count.

Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: amthif: don't drop read packets on timeout

Since the driver now uses a list for storing read packets instead of
single variable a pending read is no longer blocking other connections.
A pending read will be discarded up the file closure.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: amthif: don't copy from an empty buffer

If empty message come from FW (buf_idx == 0) then the current code will
still try to copy data from not filled buffer to the user-space,
instead the code should behave the same as when end of a message
has been reached, clean resources and return 0

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: call stop on failed char device register

If registering of character device failed stop the device properly.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: fix possible integer overflow issue

There is a possible integer overflow following by a buffer overflow
when accumulating messages coming from the FW to compose a full payload.
Occurrence of wrap around has to be prevented for next message size
calculation.
For unsigned integer the addition overflow has occurred when the
result is smaller than one of the arguments.
To simplify the fix, the types of buf.size and buf_idx are set to the
same width, namely size_t also to be aligned with the type of length
parameter in file read/write ops.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: debugfs: allow hbm features list dump in earlier stages

HBM features list is ready while sending enumerate request and
enumerating clients, output it to debugfs in these states too.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: debugfs: adjust active clients print buffer

In case of many active host clients clients (41 and more) 1K buffer
is not enough for full information print.
Calculate buffer size according to real clients number.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: trace pci configuration space io

Use tracing events also for reading and writing pci configuration space
<debugfs>/tracing/events/mei/mei_pci_reg_{read,write}

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: mei_wdt: re-register device on event

For Intel SKL platform the ME device can inform the host via
asynchronous notification that the watchdog feature was activated
on the device. The activation doesn't require reboot.
In that case the driver registers the watchdog device with the kernel.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: mei_wdt: add activation debugfs entry

Add entry for displaying whether the device has activated or
deactivated watchdog fw application.

cat <debugfs>/mei_wdt/activation
activated | deactivated

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: mei_wdt: register wd device only if required

For Intel Broadwell and newer platforms, the ME device can inform
the host whether the watchdog functionality is activated or not.
If the watchdog functionality is not activated then the watchdog interface
can be not registered and eliminate unnecessary pings and hence lower the
power consumption by avoiding waking up the device.
The feature can be deactivated also without reboot
in that case the watchdog device should be unregistered at runtime.

The information regarding the deactivation is reported
in the ping response command. In runtime case the unregistration
has to be run from a worker so that the ping initiated by the watchdog
core completes. Otherwise the flow will deadlock on watchdog
core mutex which both ping and unregistration acquire.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: bus: whitelist the watchdog client

The iAMT WD client has to be whitelisted sice it has two connections
and is filtered out by number_of_connections fixup.
Also the API has changed for BDW and SKL but firmware haven't updated
the protocol version.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: mei_wdt: add status debugfs entry

Add entry for displaying current watchdog internal state

cat <debugfs>/mei_wdt/state
IDLE|START|RUNNING|STOPPING

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: mei_wdt: implement MEI iAMT watchdog driver

Create a driver with the generic watchdog interface
for the MEI iAMT watchdog device.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: wd: drop the watchdog code from the core mei driver

Instead of integrating the iAMT watchdog in the mei core driver
we will create a watchdog device on the mei client bus and
create a driver for it.

This patch removes the watchdog code from the mei core driver.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: drop nfc leftovers from the mei driver

We left few function prototypes in the header file after
moving nfc logic to bus.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: always copy the read buffer if data is ready

Copy completed callback content to the user space
if we have such callback ready in the beginning of the read.
Simplify offset processing logic as byproduct.

This is a refinement for:
commit 139aacf757fc ("mei: fix read after read scenario")

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: prevent queuing new flow control credit.

The MEI  FW can receive only one flow control for read.
Currently the driver only checks if a flow control credit was already
sent and read is pending in the rd_pending queue, but it also has to
check if flow control credit already queued in the write control queue
to prevent sending more than one flow control credits.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: bus: remove redundant uuid string in debug messages

Remove uuid from the debug messages in bus-fixup.c
as this is already part of the device name.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: goldfish: goldfish_nand: Add DMA Support using dmam_alloc_coherent

Function nand_setup_cmd_params has 2 goals-

-Initialize the cmd_params field so that it can be used to send and read
commands from the device.
-Get a bus address for the allocated memory to transfer to the device.

Replace the combination of devm_kzalloc and _pa() with dmam_alloc_coherent.
Coherent mapping guarantees that the device and CPU are in sync.

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

goldfish: Enable ACPI-based enumeration for android pipe

Add ACPI binding to the android pipe driver

Signed-off-by: Jason Hu <jia-cheng.hu@intel.com>
Signed-off-by: Jin Qian <jinqian@android.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

goldfish_pipe: Pass physical addresses to the device if supported

For reading and writing guest user space buffers, currently the kernel
sends the guest virtual address of the buffer to the pipe device. This
virtual address has to be first converted to a guest physical address.
Doing this translation on the QEMU side is inefficient and requires
additional handling when KVM is enabled, whose implementation would
either incur intrusive changes to QEMU's KVM support code or suffer
from poor performance, see commit 08c7228c50f8 ("x86-kvm: only sync
SREGS when doing address translation") of $AOSP/external/qemu for
details, and thus should be avoided if possible.

There is a TODO comment in hw/misc/android_pipe.c in the new Android
emulator source tree ($AOSP/external/qemu-android) which requests that
the translation be done on the kernel side and that physical addresses
be passed to the device instead of virtual ones. Once the QEMU-side
implementation is done, the kernel will need to support both the new
paddr-based pipe device and the old vaddr-based one (which will
continue to be used by the classic emulator). This patch achieves that
by leveraging the device version register available in the new device.

See https://android-review.googlesource.com/128280 for the QEMU-side
patch.

In addition, use the mmap semaphore (in read mode) to safeguard the
call to get_user_pages().

Signed-off-by: Yu Ning <yu.ning@intel.com>
Signed-off-by: Jin Qian <jinqian@android.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Enable platform support for Goldfish virtual devices

Enable CONFIG_GOLDFISH for MIPS platforms.

Signed-off-by: Miodrag Dinic <miodrag.dinic@imgtec.com>
Signed-off-by: Jin Qian <jinqian@android.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform: goldfish: pipe: don't log when dropping PIPE_ERROR_AGAIN

On PIPE_ERROR_AGAIN, just stopping in the middle of a transfer and
returning the number of bytes actually handled is the right behavior.

Other errors should be returned on the next read() or write() call.
Continue logging those until we confirm nothing actually relies on the
existing (wrong) behavior of dropping errors on the floor.

Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Jin Qian <jinqian@android.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform: goldfish: pipe: add devicetree bindings

Add bindings so we don't need to rely on goldfish virtual bus for
probing any more, which means we don't need ARM and MIPS goldfish
board code for instantiating the bus.

In the long term we would like to move towards replacing the Android
pipe with virtio-vsock that is currently under development.

Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Jin Qian <jinqian@android.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

goldfish_pipe: Pin pages to memory while copying and other cleanups

The existing code had a troubling TODO statement concerning the fact
that it just did a check if the page that the QEMU backend was going to
read from / write to was there before the call to the QEMU backend and
then relying on the fact that the page stayed around, even in a
preemptible SMP kernel.  Obviously the page could go away or be
reassigned, and strange things may happen.

Further, writes were not tracked, so any use of COW or KSM-like
features would break completely.  Probably that was never used by adbd
(the only current active user of the pipe), but could prove much more
dangerous for the GPU passthrough mechanism.

Instead, use get_user_pages() as the comment suggested and cleanup the
error path and add the set_page_dirt() call on a successful read
operation.

Also clarify the count used to return from successful read/write calls
and use Linux style commentary in various places of the file.

Note: The "just ignore error and return whatever we read so far" error
handling is really quite horrific.  I cannot change it without a more
careful study of all user space ABIs reliance on this 'feature'.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Jin Qian <jinqian@android.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

goldfish_pipe: don't be clever with #define offsets

It just makes it harder to figure out which commands are being used.

Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Jin Qian <jinqian@android.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

goldfish: refactor goldfish platform configs

On new virtual devices, the goldfish virtual bus can be replaced with
autoprobing infrastructure like Device Tree.  Refactor the goldfish
kernel configs to better accommodate this.

Move the goldfish platform into a menuconfig in the style of the chrome
platform, and separate the goldfish bus into its own config option.

Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Jin Qian <jinqian@android.com>
[Corrected a tristate to bool]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.5-rc1

Merge branch 'upstream' of git://git.linux-mips.org/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes.

  The executive summary:

   - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY.
   - Avoid useless rebuilds for zboot.
   - jz4780: Add NEMC, BCH and NAND device tree nodes
   - Initial support for the MicroChip's DT platform.  As all the device
     drivers are missing this is still of limited use.
   - Some Loongson3 cleanups.
   - The unavoidable whitespace polishing.
   - Reduce clock skew when synchronizing the CPU cycle counters on CPU
     startup.
   - Add MIPS R6 fixes.
   - Lots of cleanups across arch/mips as fallout from KVM.
   - Lots of minor fixes and changes for IEEE 754-2008 support to the
     FPU emulator / fp-assist software.
   - Minor Ralink, BCM47xx and bcm963xx platform support improvments.
   - Support SMP on BCM63168"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits)
  MIPS: zboot: Add support for serial debug using the PROM
  MIPS: zboot: Avoid useless rebuilds
  MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB
  MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function
  MIPS: bcm963xx: Update bcm_tag field image_sequence
  MIPS: bcm963xx: Move extended flash address to bcm_tag header file
  MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure
  MIPS: bcm63xx: nvram: Use nvram structure definition from header file
  MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure
  MAINTAINERS: Add KVM for MIPS entry
  MIPS: KVM: Add missing newline to kvm_err()
  MIPS: Move KVM specific opcodes into asm/inst.h
  MIPS: KVM: Use cacheops.h definitions
  MIPS: Break down cacheops.h definitions
  MIPS: Use EXCCODE_ constants with set_except_vector()
  MIPS: Update trap codes
  MIPS: Move Cause.ExcCode trap codes to mipsregs.h
  MIPS: KVM: Make kvm_mips_{init,exit}() static
  MIPS: KVM: Refactor added offsetof()s
  MIPS: KVM: Convert EXPORT_SYMBOL to _GPL
  ...

Merge tag 'platform-drivers-x86-v4.5-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:
 "Emergency travel prevented me from completing my final testing on this
  until today.  Nothing here that couldn't wait until RC1 fixes, but I
  thought it best to get it out sooner rather than later as it does
  contain a build warning fix.

  Summary:

  A build warning fix, MAINTAINERS cleanup, and a new DMI quirk:

  ideapad-laptop:
   - Add Lenovo Yoga 700 to no_hw_rfkill dmi list

  MAINTAINERS:
   - Combine multiple telemetry entries

  intel_telemetry_debugfs:
   - Fix unused warnings in telemetry debugfs"

* tag 'platform-drivers-x86-v4.5-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  ideapad-laptop: Add Lenovo Yoga 700 to no_hw_rfkill dmi list
  MAINTAINERS: Combine multiple telemetry entries
  intel_telemetry_debugfs: Fix unused warnings in telemetry debugfs

Merge branch 'next' of git://git./linux/kernel/git/rzhang/linux

Pull thermal management updates from Zhang Rui:
 "The top merge commit was re-generated yesterday because two topic
  branches were dropped from this pull request in the last minute due to
  some unaddressed comments.  All the other material has been in
  linux-next for quite a while.

  Specifics:

   - Enhance thermal core to handle unexpected device cooling states
     after fresh boot and system resume.  From Zhang Rui and Chen Yu.

   - Several fixes and cleanups on Rockchip and RCAR thermal drivers.
     From Caesar Wang and Kuninori Morimoto.

   - Add Broxton support for Intel processor thermal reporting device
     driver.  From Amy Wiles"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal: trip_point_temp_store() calls thermal_zone_device_update()
  thermal: rcar: rcar_thermal_get_temp() return error if strange temp
  thermal: rcar: check irq possibility in rcar_thermal_irq_xxx()
  thermal: rcar: check every rcar_thermal_update_temp() return value
  thermal: rcar: move rcar_thermal_dt_ids to upside
  thermal: rockchip: Support the RK3399 SoCs in thermal driver
  thermal: rockchip: Support the RK3228 SoCs in thermal driver
  dt-bindings: rockchip-thermal: Support the RK3228/RK3399 SoCs compatible
  thermal: rockchip: fix a trivial typo
  Thermal: Enable Broxton SoC thermal reporting device
  thermal: constify pch_dev_ops structure
  Thermal: do thermal zone update after a cooling device registered
  Thermal: handle thermal zone device properly during system sleep
  Thermal: initialize thermal zone device correctly

Merge tag 'for-linus-4.5-merge-window' of git://git./linux/kernel/git/ericvh/v9fs

Pull 9p updates from Eric Van Hensbergen:
 "Sorry for the last minute pull request, there's was a change that
  didn't get pulled into for-next until two weeks ago and I wanted to
  give it some bake time.

  Summary:

  Rework and error handling fixes, primarily in the fscatch and fd
  transports"

* tag 'for-linus-4.5-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: use fscache mutex rather than spinlock
  9p: trans_fd, bail out if recv fcall if missing
  9p: trans_fd, read rework to use p9_parse_header
  net/9p: Add device name details on error