git.stricted.de - GitHub/LineageOS/android_kernel_motorola

drm/amdgpu/display: fix ref count leak when pm_runtime_get_sync fails

[ Upstream commit f79f94765f8c39db0b7dec1d335ab046aac03f20 ]

The call to pm_runtime_get_sync increments the counter even in case of
failure, leading to incorrect ref count.
In case of failure, decrement the ref count before returning.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config

[ Upstream commit e008fa6fb41544b63973a529b704ef342f47cc65 ]

in amdgpu_display_crtc_set_config, the call to pm_runtime_get_sync
increments the counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: fix ref count leak in amdgpu_drm_ioctl

[ Upstream commit 5509ac65f2fe5aa3c0003237ec629ca55024307c ]

in amdgpu_drm_ioctl the call to pm_runtime_get_sync increments the
counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: fix ref count leak in amdgpu_driver_open_kms

[ Upstream commit 9ba8923cbbe11564dd1bf9f3602add9a9cfbb5c6 ]

in amdgpu_driver_open_kms the call to pm_runtime_get_sync increments the
counter even in case of failure, leading to incorrect
ref count. In case of failure, decrement the ref count before returning.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/radeon: fix multiple reference count leak

[ Upstream commit 6f2e8acdb48ed166b65d47837c31b177460491ec ]

On calling pm_runtime_get_sync() the reference count of the device
is incremented. In case of failure, decrement the
reference count before returning the error.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Fix reference count leaks.

[ Upstream commit 20eca0123a35305e38b344d571cf32768854168c ]

kobject_init_and_add() takes reference even when it fails.
If this function returns an error, kobject_put() must be called to
properly clean up the memory associated with the object.

Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/iova: Don't BUG on invalid PFNs

[ Upstream commit d3e3d2be688b4b5864538de61e750721a311e4fc ]

Unlike the other instances which represent a complete loss of
consistency within the rcache mechanism itself, or a fundamental
and obvious misconfiguration by an IOMMU driver, the BUG_ON() in
iova_magazine_free_pfns() can be provoked at more or less any time
in a "spooky action-at-a-distance" manner by any old device driver
passing nonsense to dma_unmap_*() which then propagates through to
queue_iova().

Not only is this well outside the IOVA layer's control, it's also
nowhere near fatal enough to justify panicking anyway - all that
really achieves is to make debugging the offending driver more
difficult. Let's simply WARN and otherwise ignore bogus PFNs.

Reported-by: Prakash Gupta <guptap@codeaurora.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Prakash Gupta <guptap@codeaurora.org>
Link: https://lore.kernel.org/r/acbd2d092b42738a03a21b417ce64e27f8c91c86.1591103298.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: tcmu: Fix crash on ARM during cmd completion

[ Upstream commit 5a0c256d96f020e4771f6fd5524b80f89a2d3132 ]

If tcmu_handle_completions() has to process a padding shorter than
sizeof(struct tcmu_cmd_entry), the current call to
tcmu_flush_dcache_range() with sizeof(struct tcmu_cmd_entry) as length
param is wrong and causes crashes on e.g. ARM, because
tcmu_flush_dcache_range() in this case calls
flush_dcache_page(vmalloc_to_page(start)); with start being an invalid
address above the end of the vmalloc'ed area.

The fix is to use the minimum of remaining ring space and sizeof(struct
tcmu_cmd_entry) as the length param.

The patch was tested on kernel 4.19.118.

See https://bugzilla.kernel.org/show_bug.cgi?id=208045#c10

Link: https://lore.kernel.org/r/20200629093756.8947-1-bstroesser@ts.fujitsu.com
Tested-by: JiangYu <lnsyyj@hotmail.com>
Acked-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blktrace: ensure our debugfs dir exists

[ Upstream commit b431ef837e3374da0db8ff6683170359aaa0859c ]

We make an assumption that a debugfs directory exists, but since
this can fail ensure it exists before allowing blktrace setup to
complete. Otherwise we end up stuffing blktrace files on the debugfs
root directory. In the worst case scenario this *in theory* can create
an eventual panic *iff* in the future a similarly named file is created
prior on the debugfs root directory. This theoretical crash can happen
due to a recursive removal followed by a specific dentry removal.

This doesn't fix any known crash, however I have seen the files
go into the main debugfs root directory in cases where the debugfs
directory was not created due to other internal bugs with blktrace
now fixed.

blktrace is also completely useless without this directory, so
this ensures to userspace we only setup blktrace if the kernel
can stuff files where they are supposed to go into.

debugfs directory creations typically aren't checked for, and we have
maintainers doing sweep removals of these checks, but since we need this
check to ensure proper userspace blktrace functionality we make sure
to annotate the justification for the check.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: pci: ttpci: av7110: fix possible buffer overflow caused by bad DMA value in debiirq()

[ Upstream commit 6499a0db9b0f1e903d52f8244eacc1d4be00eea2 ]

The value av7110->debi_virt is stored in DMA memory, and it is assigned
to data, and thus data[0] can be modified at any time by malicious
hardware. In this case, "if (data[0] < 2)" can be passed, but then
data[0] can be changed into a large number, which may cause buffer
overflow when the code "av7110->ci_slot[data[0]]" is used.

To fix this possible bug, data[0] is assigned to a local variable, which
replaces the use of data[0].

Signed-off-by: Jia-Ju Bai <baijiaju@tsinghua.edu.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/xive: Ignore kmemleak false positives

[ Upstream commit f0993c839e95dd6c7f054a1015e693c87e33e4fb ]

xive_native_provision_pages() allocates memory and passes the pointer to
OPAL so kmemleak cannot find the pointer usage in the kernel memory and
produces a false positive report (below) (even if the kernel did scan
OPAL memory, it is unable to deal with __pa() addresses anyway).

This silences the warning.

unreferenced object 0xc000200350c40000 (size 65536):
  comm "qemu-system-ppc", pid 2725, jiffies 4294946414 (age 70776.530s)
  hex dump (first 32 bytes):
    02 00 00 00 50 00 00 00 00 00 00 00 00 00 00 00  ....P...........
    01 00 08 07 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<0000000081ff046c>] xive_native_alloc_vp_block+0x120/0x250
    [<00000000d555d524>] kvmppc_xive_compute_vp_id+0x248/0x350 [kvm]
    [<00000000d69b9c9f>] kvmppc_xive_connect_vcpu+0xc0/0x520 [kvm]
    [<000000006acbc81c>] kvm_arch_vcpu_ioctl+0x308/0x580 [kvm]
    [<0000000089c69580>] kvm_vcpu_ioctl+0x19c/0xae0 [kvm]
    [<00000000902ae91e>] ksys_ioctl+0x184/0x1b0
    [<00000000f3e68bd7>] sys_ioctl+0x48/0xb0
    [<0000000001b2c127>] system_call_exception+0x124/0x1f0
    [<00000000d2b2ee40>] system_call_common+0xe8/0x214

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200612043303.84894-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8916: Pull down PDM GPIOs during sleep

[ Upstream commit e2ee9edc282961783d519c760bbaa20fed4dec38 ]

The original qcom kernel changed the PDM GPIOs to be pull-down
during sleep at some point. Reportedly this was done because
there was some "leakage at PDM outputs during sleep":

https://source.codeaurora.org/quic/la/kernel/msm-3.10/commit/?id=0f87e08c1cd3e6484a6f7fb3e74e37340bdcdee0

I cannot say how effective this is, but everything seems to work
fine with this change so let's apply the same to mainline just
to be sure.

Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200605185916.318494-3-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: intel-lpss: Add Intel Emmitsburg PCH PCI IDs

[ Upstream commit 3ea2e4eab64cefa06055bb0541fcdedad4b48565 ]

Intel Emmitsburg PCH has the same LPSS than Intel Ice Lake.
Add the new IDs to the list of supported devices.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: tegra: Fix reference count leaks.

[ Upstream commit deca195383a6085be62cb453079e03e04d618d6e ]

Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count if pm_runtime_put is not called in
error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails.

Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200613204422.24484-1-wu000273@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: pci: delete repeated words in comments

[ Upstream commit c7fabbc51352f50cc58242a6dc3b9c1a3599849b ]

Drop duplicated words in sound/pci/.
{and, the, at}

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20200806021926.32418-1-rdunlap@infradead.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gre6: Fix reception with IP6_TNL_F_RCV_DSCP_COPY

[ Upstream commit 272502fcb7cda01ab07fc2fcff82d1d2f73d43cc ]

When receiving an IPv4 packet inside an IPv6 GRE packet, and the
IP6_TNL_F_RCV_DSCP_COPY flag is set on the tunnel, the IPv4 header would
get corrupted. This is due to the common ip6_tnl_rcv() function assuming
that the inner header is always IPv6. This patch checks the tunnel
protocol for IPv4 inner packets, but still defaults to IPv6.

Fixes: 308edfdf1563 ("gre6: Cleanup GREv6 receive path, call common GRE functions")
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipvlan: fix device features

[ Upstream commit d0f5c7076e01fef6fcb86988d9508bf3ce258bd4 ]

Processing NETDEV_FEAT_CHANGE causes IPvlan links to lose
NETIF_F_LLTX feature because of the incorrect handling of
features in ipvlan_fix_features().

--before--
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~# ethtool -K ipvl0 tso off
Cannot change tcp-segmentation-offload
Actual changes:
vlan-challenged: off [fixed]
tx-lockless: off [fixed]
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: off [fixed]
lpaa10:~#

--after--
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~# ethtool -K ipvl0 tso off
Cannot change tcp-segmentation-offload
Could not change any device features
lpaa10:~# ethtool -k ipvl0 | grep tx-lockless
tx-lockless: on [fixed]
lpaa10:~#

Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix uninit skb->data in tipc_nl_compat_dumpit()

[ Upstream commit 47733f9daf4fe4f7e0eb9e273f21ad3a19130487 ]

__tipc_nl_compat_dumpit() has two callers, and it expects them to
pass a valid nlmsghdr via arg->data. This header is artificial and
crafted just for __tipc_nl_compat_dumpit().

tipc_nl_compat_publ_dump() does so by putting a genlmsghdr as well
as some nested attribute, TIPC_NLA_SOCK. But the other caller
tipc_nl_compat_dumpit() does not, this leaves arg->data uninitialized
on this call path.

Fix this by just adding a similar nlmsghdr without any payload in
tipc_nl_compat_dumpit().

This bug exists since day 1, but the recent commit 6ea67769ff33
("net: tipc: prepare attrs in __tipc_nl_compat_dumpit()") makes it
easier to appear.

Reported-and-tested-by: syzbot+0e7181deafa7e0b79923@syzkaller.appspotmail.com
Fixes: d0796d1ef63d ("tipc: convert legacy nl bearer dump to nl compat")
Cc: Jon Maloy <jmaloy@redhat.com>
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Richard Alpe <richard.alpe@ericsson.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: Fix potential wrong skb->protocol in skb_vlan_untag()

[ Upstream commit 55eff0eb7460c3d50716ed9eccf22257b046ca92 ]

We may access the two bytes after vlan_hdr in vlan_set_encap_proto(). So
we should pull VLAN_HLEN + sizeof(unsigned short) in skb_vlan_untag() or
we may access the wrong data.

Fixes: 0d5501c1c828 ("net: Always untag vlan-tagged traffic on input.")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64s: Don't init FSCR_DSCR in __init_FSCR()

commit 0828137e8f16721842468e33df0460044a0c588b upstream.

__init_FSCR() was added originally in commit 2468dcf641e4 ("powerpc:
Add support for context switching the TAR register") (Feb 2013), and
only set FSCR_TAR.

At that point FSCR (Facility Status and Control Register) was not
context switched, so the setting was permanent after boot.

Later we added initialisation of FSCR_DSCR to __init_FSCR(), in commit
54c9b2253d34 ("powerpc: Set DSCR bit in FSCR setup") (Mar 2013), again
that was permanent after boot.

Then commit 2517617e0de6 ("powerpc: Fix context switch DSCR on
POWER8") (Aug 2013) added a limited context switch of FSCR, just the
FSCR_DSCR bit was context switched based on thread.dscr_inherit. That
commit said "This clears the H/FSCR DSCR bit initially", but it
didn't, it left the initialisation of FSCR_DSCR in __init_FSCR().
However the initial context switch from init_task to pid 1 would clear
FSCR_DSCR because thread.dscr_inherit was 0.

That commit also introduced the requirement that FSCR_DSCR be clear
for user processes, so that we can take the facility unavailable
interrupt in order to manage dscr_inherit.

Then in commit 152d523e6307 ("powerpc: Create context switch helpers
save_sprs() and restore_sprs()") (Dec 2015) FSCR was added to
thread_struct. However it still wasn't fully context switched, we just
took the existing value and set FSCR_DSCR if the new thread had
dscr_inherit set. FSCR was still initialised at boot to FSCR_DSCR |
FSCR_TAR, but that value was not propagated into the thread_struct, so
the initial context switch set FSCR_DSCR back to 0.

Finally commit b57bd2de8c6c ("powerpc: Improve FSCR init and context
switching") (Jun 2016) added a full context switch of the FSCR, and
added an initialisation of init_task.thread.fscr to FSCR_TAR |
FSCR_EBB, but omitted FSCR_DSCR.

The end result is that swapper runs with FSCR_DSCR set because of the
initialisation in __init_FSCR(), but no other processes do, they use
the value from init_task.thread.fscr.

Having FSCR_DSCR set for swapper allows it to access SPR 3 from
userspace, but swapper never runs userspace, so it has no useful
effect. It's also confusing to have the value initialised in two
places to two different values.

So remove FSCR_DSCR from __init_FSCR(), this at least gets us to the
point where there's a single value of FSCR, even if it's still set in
two places.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Alistair Popple <alistair@popple.id.au>
Link: https://lore.kernel.org/r/20200527145843.2761782-1-mpe@ellerman.id.au
Cc: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.195

Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm/arm64: Don't reschedule in unmap_stage2_range()

Upstream commits fdfe7cbd5880 ("KVM: Pass MMU notifier range flags to
kvm_unmap_hva_range()") and b5331379bc62 ("KVM: arm64: Only reschedule
if MMU_NOTIFIER_RANGE_BLOCKABLE is not set") fix a "sleeping from invalid
context" BUG caused by unmap_stage2_range() attempting to reschedule when
called on the OOM path.

Unfortunately, these patches rely on the MMU notifier callback being
passed knowledge about whether or not blocking is permitted, which was
introduced in 4.19. Rather than backport this considerable amount of
infrastructure just for KVM on arm, instead just remove the conditional
reschedule.

Cc: <stable@vger.kernel.org> # v4.14 only
Cc: Marc Zyngier <maz@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: Evict unregistered clks from parent caches

commit bdcf1dc253248542537a742ae1e7ccafdd03f2d3 upstream.

We leave a dangling pointer in each clk_core::parents array that has an
unregistered clk as a potential parent when that clk_core pointer is
freed by clk{_hw}_unregister(). It is impossible for the true parent of
a clk to be set with clk_set_parent() once the dangling pointer is left
in the cache because we compare parent pointers in
clk_fetch_parent_index() instead of checking for a matching clk name or
clk_hw pointer.

Before commit ede77858473a ("clk: Remove global clk traversal on fetch
parent index"), we would check clk_hw pointers, which has a higher
chance of being the same between registration and unregistration, but it
can still be allocated and freed by the clk provider. In fact, this has
been a long standing problem since commit da0f0b2c3ad2 ("clk: Correct
lookup logic in clk_fetch_parent_index()") where we stopped trying to
compare clk names and skipped over entries in the cache that weren't
NULL.

There are good (performance) reasons to not do the global tree lookup in
cases where the cache holds dangling pointers to parents that have been
unregistered. Let's take the performance hit on the uncommon
registration path instead. Loop through all the clk_core::parents arrays
when a clk is unregistered and set the entry to NULL when the parent
cache entry and clk being unregistered are the same pointer. This will
fix this problem and avoid the overhead for the "normal" case.

Based on a patch by Bjorn Andersson.

Fixes: da0f0b2c3ad2 ("clk: Correct lookup logic in clk_fetch_parent_index()")
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20190828181959.204401-1-sboyd@kernel.org
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen: don't reschedule in preemption off sections

For support of long running hypercalls xen_maybe_preempt_hcall() is
calling cond_resched() in case a hypercall marked as preemptible has
been interrupted.

Normally this is no problem, as only hypercalls done via some ioctl()s
are marked to be preemptible. In rare cases when during such a
preemptible hypercall an interrupt occurs and any softirq action is
started from irq_exit(), a further hypercall issued by the softirq
handler will be regarded to be preemptible, too. This might lead to
rescheduling in spite of the softirq handler potentially having set
preempt_disable(), leading to splats like:

BUG: sleeping function called from invalid context at drivers/xen/preempt.c:37
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 20775, name: xl
INFO: lockdep is turned off.
CPU: 1 PID: 20775 Comm: xl Tainted: G D W 5.4.46-1_prgmr_debug.el7.x86_64 #1
Call Trace:
<IRQ>
dump_stack+0x8f/0xd0
___might_sleep.cold.76+0xb2/0x103
xen_maybe_preempt_hcall+0x48/0x70
xen_do_hypervisor_callback+0x37/0x40
RIP: e030:xen_hypercall_xen_version+0xa/0x20
Code: ...
RSP: e02b:ffffc900400dcc30 EFLAGS: 00000246
RAX: 000000000004000d RBX: 0000000000000200 RCX: ffffffff8100122a
RDX: ffff88812e788000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffffff83ee3ad0 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000246 R12: ffff8881824aa0b0
R13: 0000000865496000 R14: 0000000865496000 R15: ffff88815d040000
? xen_hypercall_xen_version+0xa/0x20
? xen_force_evtchn_callback+0x9/0x10
? check_events+0x12/0x20
? xen_restore_fl_direct+0x1f/0x20
? _raw_spin_unlock_irqrestore+0x53/0x60
? debug_dma_sync_single_for_cpu+0x91/0xc0
? _raw_spin_unlock_irqrestore+0x53/0x60
? xen_swiotlb_sync_single_for_cpu+0x3d/0x140
? mlx4_en_process_rx_cq+0x6b6/0x1110 [mlx4_en]
? mlx4_en_poll_rx_cq+0x64/0x100 [mlx4_en]
? net_rx_action+0x151/0x4a0
? __do_softirq+0xed/0x55b
? irq_exit+0xea/0x100
? xen_evtchn_do_upcall+0x2c/0x40
? xen_do_hypervisor_callback+0x29/0x40
</IRQ>
? xen_hypercall_domctl+0xa/0x20
? xen_hypercall_domctl+0x8/0x20
? privcmd_ioctl+0x221/0x990 [xen_privcmd]
? do_vfs_ioctl+0xa5/0x6f0
? ksys_ioctl+0x60/0x90
? trace_hardirqs_off_thunk+0x1a/0x20
? __x64_sys_ioctl+0x16/0x20
? do_syscall_64+0x62/0x250
? entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix that by testing preempt_count() before calling cond_resched().

In kernel 5.8 this can't happen any more due to the entry code rework
(more than 100 patches, so not a candidate for backporting).

The issue was introduced in kernel 4.3, so this patch should go into
all stable kernels in [4.3 ... 5.7].

Reported-by: Sarah Newman <srn@prgmr.com>
Fixes: 0fa2f5cb2b0ecd8 ("sched/preempt, xen: Use need_resched() instead of should_resched()")
Cc: Sarah Newman <srn@prgmr.com>
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Chris Brannon <cmb@prgmr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible

commit 75802ca66354a39ab8e35822747cd08b3384a99a upstream.

This is found by code observation only.

Firstly, the worst case scenario should assume the whole range was covered
by pmd sharing.  The old algorithm might not work as expected for ranges
like (1g-2m, 1g+2m), where the adjusted range should be (0, 1g+2m) but the
expected range should be (0, 2g).

Since at it, remove the loop since it should not be required.  With that,
the new code should be faster too when the invalidating range is huge.

Mike said:

: With range (1g-2m, 1g+2m) within a vma (0, 2g) the existing code will only
: adjust to (0, 1g+2m) which is incorrect.
:
: We should cc stable.  The original reason for adjusting the range was to
: prevent data corruption (getting wrong page).  Since the range is not
: always adjusted correctly, the potential for corruption still exists.
:
: However, I am fairly confident that adjust_range_if_pmd_sharing_possible
: is only gong to be called in two cases:
:
: 1) for a single page
: 2) for range == entire vma
:
: In those cases, the current code should produce the correct results.
:
: To be safe, let's just cc stable.

Fixes: 017b1660df89 ("mm: migration: fix migration of huge PMD shared pages")
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200730201636.74778-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

do_epoll_ctl(): clean the failure exits up a bit

commit 52c479697c9b73f628140dcdfcd39ea302d05482 upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

epoll: Keep a reference on files added to the check list

commit a9ed4a6560b8562b7e2e2bed9527e88001f7b682 upstream.

When adding a new fd to an epoll, and that this new fd is an
epoll fd itself, we recursively scan the fds attached to it
to detect cycles, and add non-epool files to a "check list"
that gets subsequently parsed.

However, this check list isn't completely safe when deletions
can happen concurrently. To sidestep the issue, make sure that
a struct file placed on the check list sees its f_count increased,
ensuring that a concurrent deletion won't result in the file
disapearing from under our feet.

Cc: stable@vger.kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/pseries: Do not initiate shutdown when system is running on UPS

commit 90a9b102eddf6a3f987d15f4454e26a2532c1c98 upstream.

As per PAPR we have to look for both EPOW sensor value and event
modifier to identify the type of event and take appropriate action.

In LoPAPR v1.1 section 10.2.2 includes table 136 "EPOW Action Codes":

  SYSTEM_SHUTDOWN 3

  The system must be shut down. An EPOW-aware OS logs the EPOW error
  log information, then schedules the system to be shut down to begin
  after an OS defined delay internal (default is 10 minutes.)

Then in section 10.3.2.2.8 there is table 146 "Platform Event Log
Format, Version 6, EPOW Section", which includes the "EPOW Event
Modifier":

  For EPOW sensor value = 3
  0x01 = Normal system shutdown with no additional delay
  0x02 = Loss of utility power, system is running on UPS/Battery
  0x03 = Loss of system critical functions, system should be shutdown
  0x04 = Ambient temperature too high
  All other values = reserved

We have a user space tool (rtas_errd) on LPAR to monitor for
EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown
after predefined time. It also starts monitoring for any new EPOW
events. If it receives "Power restored" event before predefined time
it will cancel the shutdown. Otherwise after predefined time it will
shutdown the system.

Commit 79872e35469b ("powerpc/pseries: All events of
EPOW_SYSTEM_SHUTDOWN must initiate shutdown") changed our handling of
the "on UPS/Battery" case, to immediately shutdown the system. This
breaks existing setups that rely on the userspace tool to delay
shutdown and let the system run on the UPS.

Fixes: 79872e35469b ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown")
Cc: stable@vger.kernel.org # v4.0+
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
[mpe: Massage change log and add PAPR references]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200820061844.306460-1-hegdevasant@linux.vnet.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: b53: check for timeout

[ Upstream commit 774d977abfd024e6f73484544b9abe5a5cd62de7 ]

clang static analysis reports this problem

b53_common.c:1583:13: warning: The left expression of the compound
  assignment is an uninitialized value. The computed value will
  also be garbage
        ent.port &= ~BIT(port);
        ~~~~~~~~ ^

ent is set by a successful call to b53_arl_read().  Unsuccessful
calls are caught by an switch statement handling specific returns.
b32_arl_read() calls b53_arl_op_wait() which fails with the
unhandled -ETIMEDOUT.

So add -ETIMEDOUT to the switch statement.  Because
b53_arl_op_wait() already prints out a message, do not add another
one.

Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Tom Rix <trix@redhat.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hv_netvsc: Fix the queue_mapping in netvsc_vf_xmit()

[ Upstream commit c3d897e01aef8ddc43149e4d661b86f823e3aae7 ]

netvsc_vf_xmit() / dev_queue_xmit() will call VF NIC’s ndo_select_queue
or netdev_pick_tx() again. They will use skb_get_rx_queue() to get the
queue number, so the “skb->queue_mapping - 1” will be used. This may
cause the last queue of VF not been used.

Use skb_record_rx_queue() here, so that the skb_get_rx_queue() called
later will get the correct queue number, and VF will be able to use
all queues.

Fixes: b3bf5666a510 ("hv_netvsc: defer queue selection to VF")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: fix active-backup failover for current ARP slave

[ Upstream commit 0410d07190961ac526f05085765a8d04d926545b ]

When the ARP monitor is used for link detection, ARP replies are
validated for all slaves (arp_validate=3) and fail_over_mac is set to
active, two slaves of an active-backup bond may get stuck in a state
where both of them are active and pass packets that they receive to
the bond. This state makes IPv6 duplicate address detection fail. The
state is reached thus:
1. The current active slave goes down because the ARP target
is not reachable.
2. The current ARP slave is chosen and made active.
3. A new slave is enslaved. This new slave becomes the current active
slave and can reach the ARP target.
As a result, the current ARP slave stays active after the enslave
action has finished and the log is littered with "PROBE BAD" messages:
> bond0: PROBE: c_arp ens10 && cas ens11 BAD
The workaround is to remove the slave with "going back" status from
the bond and re-enslave it. This issue was encountered when DPDK PMD
interfaces were being enslaved to an active-backup bond.

I would be possible to fix the issue in bond_enslave() or
bond_change_active_slave() but the ARP monitor was fixed instead to
keep most of the actions changing the current ARP slave in the ARP
monitor code. The current ARP slave is set as inactive and backup
during the commit phase. A new state, BOND_LINK_FAIL, has been
introduced for slaves in the context of the ARP monitor. This allows
administrators to see how slaves are rotated for sending ARP requests
and attempts are made to find a new active slave.

Fixes: b2220cad583c9 ("bonding: refactor ARP active-backup monitor")
Signed-off-by: Jiri Wiesner <jwiesner@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/type1: Add proper error unwind for vfio_iommu_replay()

[ Upstream commit aae7a75a821a793ed6b8ad502a5890fb8e8f172d ]

The vfio_iommu_replay() function does not currently unwind on error,
yet it does pin pages, perform IOMMU mapping, and modify the vfio_dma
structure to indicate IOMMU mapping.  The IOMMU mappings are torn down
when the domain is destroyed, but the other actions go on to cause
trouble later.  For example, the iommu->domain_list can be empty if we
only have a non-IOMMU backed mdev attached.  We don't currently check
if the list is empty before getting the first entry in the list, which
leads to a bogus domain pointer.  If a vfio_dma entry is erroneously
marked as iommu_mapped, we'll attempt to use that bogus pointer to
retrieve the existing physical page addresses.

This is the scenario that uncovered this issue, attempting to hot-add
a vfio-pci device to a container with an existing mdev device and DMA
mappings, one of which could not be pinned, causing a failure adding
the new group to the existing container and setting the conditions
for a subsequent attempt to explode.

To resolve this, we can first check if the domain_list is empty so
that we can reject replay of a bogus domain, should we ever encounter
this inconsistent state again in the future.  The real fix though is
to add the necessary unwind support, which means cleaning up the
current pinning if an IOMMU mapping fails, then walking back through
the r-b tree of DMA entries, reading from the IOMMU which ranges are
mapped, and unmapping and unpinning those ranges.  To be able to do
this, we also defer marking the DMA entry as IOMMU mapped until all
entries are processed, in order to allow the unwind to know the
disposition of each entry.

Fixes: a54eb55045ae ("vfio iommu type1: Add support for mediated devices")
Reported-by: Zhiyi Guo <zhguo@redhat.com>
Tested-by: Zhiyi Guo <zhguo@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: intel: Fix memleak in sst_media_open

[ Upstream commit 062fa09f44f4fb3776a23184d5d296b0c8872eb9 ]

When power_up_sst() fails, stream needs to be freed
just like when try_module_get() fails. However, current
code is returning directly and ends up leaking memory.

Fixes: 0121327c1a68b ("ASoC: Intel: mfld-pcm: add control for powering up/down dsp")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813084112.26205-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: msm8916-wcd-analog: fix register Interrupt offset

[ Upstream commit ff69c97ef84c9f7795adb49e9f07c9adcdd0c288 ]

For some reason interrupt set and clear register offsets are
not set correctly.
This patch corrects them!

Fixes: 585e881e5b9e ("ASoC: codecs: Add msm8916-wcd analog codec")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200811103452.20448-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: fix a potential double-unregister

[ Upstream commit 832707021666411d04795c564a4adea5d6b94f17 ]

When we tear down a network namespace, we unregister all
the netdevices within it. So we may queue a slave device
and a bonding device together in the same unregister queue.

If the only slave device is non-ethernet, it would
automatically unregister the bonding device as well. Thus,
we may end up unregistering the bonding device twice.

Workaround this special case by checking reg_state.

Fixes: 9b5e383c11b0 ("net: Introduce unregister_netdevice_many()")
Reported-by: syzbot+af23e7f3e0a7e10c8b67@syzkaller.appspotmail.com
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: show saner speed for broadcast mode

[ Upstream commit 4ca0d9ac3fd8f9f90b72a15d8da2aca3ffb58418 ]

Broadcast mode bonds transmit a copy of all traffic simultaneously out of
all interfaces, so the "speed" of the bond isn't really the aggregate of
all interfaces, but rather, the speed of the slowest active interface.

Also, the type of the speed field is u32, not unsigned long, so adjust
that accordingly, as required to make min() function here without
complaining about mismatching types.

Fixes: bb5b052f751b ("bond: add support to read speed and duplex via ethtool")
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fec: correct the error path for regulator disable in probe

[ Upstream commit c6165cf0dbb82ded90163dce3ac183fc7a913dc4 ]

Correct the error path for regulator disable.

Fixes: 9269e5560b26 ("net: fec: add phy-reset-gpios PROBE_DEFER check")
Signed-off-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix crash during removing i40e driver

[ Upstream commit 5b6d4a7f20b09c47ca598760f6dafd554af8b6d5 ]

Fix the reason of crashing system by add waiting time to finish reset
recovery process before starting remove driver procedure.
Now VSI is releasing if VSI is not in reset recovery mode.
Without this fix it was possible to start remove driver if other
processing command need reset recovery procedure which resulted in
null pointer dereference. VSI used by the ethtool process has been
cleared by remove driver process.

[ 6731.508665] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 6731.508668] #PF: supervisor read access in kernel mode
[ 6731.508670] #PF: error_code(0x0000) - not-present page
[ 6731.508671] PGD 0 P4D 0
[ 6731.508674] Oops: 0000 [#1] SMP PTI
[ 6731.508679] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0021.032120170601 03/21/2017
[ 6731.508694] RIP: 0010:i40e_down+0x252/0x310 [i40e]
[ 6731.508696] Code: c7 78 de fa c0 e8 61 02 3a c1 66 83 bb f6 0c 00 00 00 0f 84 bf 00 00 00 45 31 e4 45 31 ff eb 03 41 89 c7 48 8b 83 98 0c 00 00 <4a> 8b 3c 20 e8 a5 79 02 00 48 83 bb d0 0c 00 00 00 74 10 48 8b 83
[ 6731.508698] RSP: 0018:ffffb75ac7b3faf0 EFLAGS: 00010246
[ 6731.508700] RAX: 0000000000000000 RBX: ffff9c9874bd5000 RCX: 0000000000000007
[ 6731.508701] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff9c987f4d9780
[ 6731.508703] RBP: ffffb75ac7b3fb30 R08: 0000000000005b60 R09: 0000000000000004
[ 6731.508704] R10: ffffb75ac64fbd90 R11: 0000000000000001 R12: 0000000000000000
[ 6731.508706] R13: ffff9c97a08e0000 R14: ffff9c97a08e0a68 R15: 0000000000000000
[ 6731.508708] FS:  00007f2617cd2740(0000) GS:ffff9c987f4c0000(0000) knlGS:0000000000000000
[ 6731.508710] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6731.508711] CR2: 0000000000000000 CR3: 0000001e765c4006 CR4: 00000000003606e0
[ 6731.508713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6731.508714] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 6731.508715] Call Trace:
[ 6731.508734]  i40e_vsi_close+0x84/0x90 [i40e]
[ 6731.508742]  i40e_quiesce_vsi.part.98+0x3c/0x40 [i40e]
[ 6731.508749]  i40e_pf_quiesce_all_vsi+0x55/0x60 [i40e]
[ 6731.508757]  i40e_prep_for_reset+0x59/0x130 [i40e]
[ 6731.508765]  i40e_reconfig_rss_queues+0x5a/0x120 [i40e]
[ 6731.508774]  i40e_set_channels+0xda/0x170 [i40e]
[ 6731.508778]  ethtool_set_channels+0xe9/0x150
[ 6731.508781]  dev_ethtool+0x1b94/0x2920
[ 6731.508805]  dev_ioctl+0xc2/0x590
[ 6731.508811]  sock_do_ioctl+0xae/0x150
[ 6731.508813]  sock_ioctl+0x34f/0x3c0
[ 6731.508821]  ksys_ioctl+0x98/0xb0
[ 6731.508828]  __x64_sys_ioctl+0x1a/0x20
[ 6731.508831]  do_syscall_64+0x57/0x1c0
[ 6731.508835]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 4b8164467b85 ("i40e: Add common function for finding VSI by type")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Set RX_ONLY mode for unicast promiscuous on VLAN

[ Upstream commit 4bd5e02a2ed1575c2f65bd3c557a077dd399f0e8 ]

Trusted VF with unicast promiscuous mode set, could listen to TX
traffic of other VFs.
Set unicast promiscuous mode to RX traffic, if VSI has port VLAN
configured. Rename misleading I40E_AQC_SET_VSI_PROMISC_TX bit to
I40E_AQC_SET_VSI_PROMISC_RX_ONLY. Aligned unicast promiscuous with
VLAN to the one without VLAN.

Fixes: 6c41a7606967 ("i40e: Add promiscuous on VLAN support")
Fixes: 3b1200891b7f ("i40e: When in promisc mode apply promisc mode to Tx Traffic as well")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: fix potential negative array index in do_split()

[ Upstream commit 5872331b3d91820e14716632ebb56b1399b34fe1 ]

If for any reason a directory passed to do_split() does not have enough
active entries to exceed half the size of the block, we can end up
iterating over all "count" entries without finding a split point.

In this case, count == move, and split will be zero, and we will
attempt a negative index into map[].

Guard against this by detecting this case, and falling back to
split-to-half-of-count instead; in this case we will still have
plenty of space (> half blocksize) in each split block.

Fixes: ef2b02d3e617 ("ext34: ensure do_split leaves enough free space in both blocks")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/f53e246b-647c-64bb-16ec-135383c70ad7@redhat.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

alpha: fix annotation of io{read,write}{16,32}be()

[ Upstream commit bd72866b8da499e60633ff28f8a4f6e09ca78efe ]

These accessors must be used to read/write a big-endian bus. The value
returned or written is native-endian.

However, these accessors are defined using be{16,32}_to_cpu() or
cpu_to_be{16,32}() to make the endian conversion but these expect a
__be{16,32} when none is present. Keeping them would need a force cast
that would solve nothing at all.

So, do the conversion using swab{16,32}, like done in asm-generic for
similar situations.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: http://lkml.kernel.org/r/20200622114232.80039-1-luc.vanoostenryck@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: Fix UBSAN null-ptr-deref in xfs_sysfs_init

[ Upstream commit 96cf2a2c75567ff56195fe3126d497a2e7e4379f ]

If xfs_sysfs_init is called with parent_kobj == NULL, UBSAN
shows the following warning:

  UBSAN: null-ptr-deref in ./fs/xfs/xfs_sysfs.h:37:23
  member access within null pointer of type 'struct xfs_kobj'
  Call Trace:
   dump_stack+0x10e/0x195
   ubsan_type_mismatch_common+0x241/0x280
   __ubsan_handle_type_mismatch_v1+0x32/0x40
   init_xfs_fs+0x12b/0x28f
   do_one_initcall+0xdd/0x1d0
   do_initcall_level+0x151/0x1b6
   do_initcalls+0x50/0x8f
   do_basic_setup+0x29/0x2b
   kernel_init_freeable+0x19f/0x20b
   kernel_init+0x11/0x1e0
   ret_from_fork+0x22/0x30

Fix it by checking parent_kobj before the code accesses its member.

Signed-off-by: Eiichi Tsukata <devel@etsukata.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: minor whitespace edits]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_ring: Avoid loop when vq is broken in virtqueue_poll

[ Upstream commit 481a0d7422db26fb63e2d64f0652667a5c6d0f3e ]

The loop may exist if vq->broken is true,
virtqueue_get_buf_ctx_packed or virtqueue_get_buf_ctx_split
will return NULL, so virtnet_poll will reschedule napi to
receive packet, it will lead cpu usage(si) to 100%.

call trace as below:
virtnet_poll
virtnet_receive
virtqueue_get_buf_ctx
virtqueue_get_buf_ctx_packed
virtqueue_get_buf_ctx_split
virtqueue_napi_complete
virtqueue_poll //return true
virtqueue_napi_schedule //it will reschedule napi

to fix this, return false if vq is broken in virtqueue_poll.

Signed-off-by: Mao Wenan <wenan.mao@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/1596354249-96204-1-git-send-email-wenan.mao@linux.alibaba.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: libfc: Free skb in fc_disc_gpn_id_resp() for valid cases

[ Upstream commit ec007ef40abb6a164d148b0dc19789a7a2de2cc8 ]

In fc_disc_gpn_id_resp(), skb is supposed to get freed in all cases except
for PTR_ERR. However, in some cases it didn't.

This fix is to call fc_frame_free(fp) before function returns.

Link: https://lore.kernel.org/r/20200729081824.30996-2-jhasan@marvell.com
Reviewed-by: Girish Basrur <gbasrur@marvell.com>
Reviewed-by: Santosh Vernekar <svernekar@marvell.com>
Reviewed-by: Saurav Kashyap <skashyap@marvell.com>
Reviewed-by: Shyam Sundar <ssundar@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: intel_pstate: Fix cpuinfo_max_freq when MSR_TURBO_RATIO_LIMIT is 0

[ Upstream commit 4daca379c703ff55edc065e8e5173dcfeecf0148 ]

The MSR_TURBO_RATIO_LIMIT can be 0. This is not an error. User can update
this MSR via BIOS settings on some systems or can use msr tools to update.
Also some systems boot with value = 0.

This results in display of cpufreq/cpuinfo_max_freq wrong. This value
will be equal to cpufreq/base_frequency, even though turbo is enabled.

But platform will still function normally in HWP mode as we get max
1-core frequency from the MSR_HWP_CAPABILITIES. This MSR is already used
to calculate cpu->pstate.turbo_freq, which is used for to set
policy->cpuinfo.max_freq. But some other places cpu->pstate.turbo_pstate
is used. For example to set policy->max.

To fix this, also update cpu->pstate.turbo_pstate when updating
cpu->pstate.turbo_freq.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jffs2: fix UAF problem

[ Upstream commit 798b7347e4f29553db4b996393caf12f5b233daf ]

The log of UAF problem is listed below.
BUG: KASAN: use-after-free in jffs2_rmdir+0xa4/0x1cc [jffs2] at addr c1f165fc
Read of size 4 by task rm/8283
=============================================================================
BUG kmalloc-32 (Tainted: P    B      O   ): kasan: bad access detected
-----------------------------------------------------------------------------

INFO: Allocated in 0xbbbbbbbb age=3054364 cpu=0 pid=0
        0xb0bba6ef
        jffs2_write_dirent+0x11c/0x9c8 [jffs2]
        __slab_alloc.isra.21.constprop.25+0x2c/0x44
        __kmalloc+0x1dc/0x370
        jffs2_write_dirent+0x11c/0x9c8 [jffs2]
        jffs2_do_unlink+0x328/0x5fc [jffs2]
        jffs2_rmdir+0x110/0x1cc [jffs2]
        vfs_rmdir+0x180/0x268
        do_rmdir+0x2cc/0x300
        ret_from_syscall+0x0/0x3c
INFO: Freed in 0x205b age=3054364 cpu=0 pid=0
        0x2e9173
        jffs2_add_fd_to_list+0x138/0x1dc [jffs2]
        jffs2_add_fd_to_list+0x138/0x1dc [jffs2]
        jffs2_garbage_collect_dirent.isra.3+0x21c/0x288 [jffs2]
        jffs2_garbage_collect_live+0x16bc/0x1800 [jffs2]
        jffs2_garbage_collect_pass+0x678/0x11d4 [jffs2]
        jffs2_garbage_collect_thread+0x1e8/0x3b0 [jffs2]
        kthread+0x1a8/0x1b0
        ret_from_kernel_thread+0x5c/0x64
Call Trace:
[c17ddd20] [c02452d4] kasan_report.part.0+0x298/0x72c (unreliable)
[c17ddda0] [d2509680] jffs2_rmdir+0xa4/0x1cc [jffs2]
[c17dddd0] [c026da04] vfs_rmdir+0x180/0x268
[c17dde00] [c026f4e4] do_rmdir+0x2cc/0x300
[c17ddf40] [c001a658] ret_from_syscall+0x0/0x3c

The root cause is that we don't get "jffs2_inode_info.sem" before
we scan list "jffs2_inode_info.dents" in function jffs2_rmdir.
This patch add codes to get "jffs2_inode_info.sem" before we scan
"jffs2_inode_info.dents" to slove the UAF problem.

Signed-off-by: Zhe Li <lizhe67@huawei.com>
Reviewed-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfs: fix inode quota reservation checks

[ Upstream commit f959b5d037e71a4d69b5bf71faffa065d9269b4a ]

xfs_trans_dqresv is the function that we use to make reservations
against resource quotas. Each resource contains two counters: the
q_core counter, which tracks resources allocated on disk; and the dquot
reservation counter, which tracks how much of that resource has either
been allocated or reserved by threads that are working on metadata
updates.

For disk blocks, we compare the proposed reservation counter against the
hard and soft limits to decide if we're going to fail the operation.
However, for inodes we inexplicably compare against the q_core counter,
not the incore reservation count.

Since the q_core counter is always lower than the reservation count and
we unlock the dquot between reservation and transaction commit, this
means that multiple threads can reserve the last inode count before we
hit the hard limit, and when they commit, we'll be well over the hard
limit.

Fix this by checking against the incore inode reservation counter, since
we would appear to maintain that correctly (and that's what we report in
GETQUOTA).

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

m68knommu: fix overwriting of bits in ColdFire V3 cache control

[ Upstream commit bdee0e793cea10c516ff48bf3ebb4ef1820a116b ]

The Cache Control Register (CACR) of the ColdFire V3 has bits that
control high level caching functions, and also enable/disable the use
of the alternate stack pointer register (the EUSP bit) to provide
separate supervisor and user stack pointer registers. The code as
it is today will blindly clear the EUSP bit on cache actions like
invalidation. So it is broken for this case - and that will result
in failed booting (interrupt entry and exit processing will be
completely hosed).

This only affects ColdFire V3 parts that support the alternate stack
register (like the 5329 for example) - generally speaking new parts do,
older parts don't. It has no impact on ColdFire V3 parts with the single
stack pointer, like the 5307 for example.

Fix the cache bit defines used, so they maintain the EUSP bit when
carrying out cache actions through the CACR register.

Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: psmouse - add a newline when printing 'proto' by sysfs

[ Upstream commit 4aec14de3a15cf9789a0e19c847f164776f49473 ]

When I cat parameter 'proto' by sysfs, it displays as follows. It's
better to add a newline for easy reading.

root@syzkaller:~# cat /sys/module/psmouse/parameters/proto
autoroot@syzkaller:~#

Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20200720073846.120724-1-wangxiongfeng2@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: vpss: clean up resources in init

[ Upstream commit 9c487b0b0ea7ff22127fe99a7f67657d8730ff94 ]

If platform_driver_register() fails within vpss_init() resources are not
cleaned up. The patch fixes this issue by introducing the corresponding
error handling.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: goldfish: Enable interrupt in set_alarm() when necessary

[ Upstream commit 22f8d5a1bf230cf8567a4121fc3789babb46336d ]

When use goldfish rtc, the "hwclock" command fails with "select() to
/dev/rtc to wait for clock tick timed out". This is because "hwclock"
need the set_alarm() hook to enable interrupt when alrm->enabled is
true. This operation is missing in goldfish rtc (but other rtc drivers,
such as cmos rtc, enable interrupt here), so add it.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1592654683-31314-1-git-send-email-chenhc@lemote.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: budget-core: Improve exception handling in budget_register()

[ Upstream commit fc0456458df8b3421dba2a5508cd817fbc20ea71 ]

budget_register() has no error handling after its failure.
Add the missed undo functions for error handling to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Add DELAY_BEFORE_LPM quirk for Micron devices

[ Upstream commit c0a18ee0ce78d7957ec1a53be35b1b3beba80668 ]

It is confirmed that Micron device needs DELAY_BEFORE_LPM quirk to have a
delay before VCC is powered off. Sdd Micron vendor ID and this quirk for
Micron devices.

Link: https://lore.kernel.org/r/20200612012625.6615-2-stanley.chu@mediatek.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: Prevent adding devices below an unregistering controller

[ Upstream commit ddf75be47ca748f8b12d28ac64d624354fddf189 ]

CONFIG_OF_DYNAMIC and CONFIG_ACPI allow adding SPI devices at runtime
using a DeviceTree overlay or DSDT patch.  CONFIG_SPI_SLAVE allows the
same via sysfs.

But there are no precautions to prevent adding a device below a
controller that's being removed.  Such a device is unusable and may not
even be able to unbind cleanly as it becomes inaccessible once the
controller has been torn down.  E.g. it is then impossible to quiesce
the device's interrupt.

of_spi_notify() and acpi_spi_notify() do hold a ref on the controller,
but otherwise run lockless against spi_unregister_controller().

Fix by holding the spi_add_lock in spi_unregister_controller() and
bailing out of spi_add_device() if the controller has been unregistered
concurrently.

Fixes: ce79d54ae447 ("spi/of: Add OF notifier handler")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v3.19+
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Octavian Purdila <octavian.purdila@intel.com>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Link: https://lore.kernel.org/r/a8c3205088a969dc8410eec1eba9aface60f36af.1596451035.git.lukas@wunner.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

jbd2: add the missing unlock_buffer() in the error path of jbd2_write_superblock()

commit ef3f5830b859604eda8723c26d90ab23edc027a4 upstream.

jbd2_write_superblock() is under the buffer lock of journal superblock
before ending that superblock write, so add a missing unlock_buffer() in
in the error path before submitting buffer.

Fixes: 742b06b5628f ("jbd2: check superblock mapped prior to committing")
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20200620061948.2049579-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix checking of directory entry validity for inline directories

commit 7303cb5bfe845f7d43cd9b2dbd37dbb266efda9b upstream.

ext4_search_dir() and ext4_generic_delete_entry() can be called both for
standard director blocks and for inline directories stored inside inode
or inline xattr space. For the second case we didn't call
ext4_check_dir_entry() with proper constraints that could result in
accepting corrupted directory entry as well as false positive filesystem
errors like:

EXT4-fs error (device dm-0): ext4_search_dir:1395: inode #28320400:
block 113246792: comm dockerd: bad entry in directory: directory entry too
close to block end - offset=0, inode=28320403, rec_len=32, name_len=8,
size=4096

Fix the arguments passed to ext4_check_dir_entry().

Fixes: 109ba779d6cc ("ext4: check for directory entries too close to block end")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200731162135.8080-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, page_alloc: fix core hung in free_pcppages_bulk()

commit 88e8ac11d2ea3acc003cf01bb5a38c8aa76c3cfd upstream.

The following race is observed with the repeated online, offline and a
delay between two successive online of memory blocks of movable zone.

P1 P2

Online the first memory block in
the movable zone. The pcp struct
values are initialized to default
values,i.e., pcp->high = 0 &
pcp->batch = 1.

Allocate the pages from the
movable zone.

Try to Online the second memory
block in the movable zone thus it
entered the online_pages() but yet
to call zone_pcp_update().
This process is entered into
the exit path thus it tries
to release the order-0 pages
to pcp lists through
free_unref_page_commit().
As pcp->high = 0, pcp->count = 1
proceed to call the function
free_pcppages_bulk().
Update the pcp values thus the
new pcp values are like, say,
pcp->high = 378, pcp->batch = 63.
Read the pcp's batch value using
READ_ONCE() and pass the same to
free_pcppages_bulk(), pcp values
passed here are, batch = 63,
count = 1.

Since num of pages in the pcp
lists are less than ->batch,
then it will stuck in
while(list_empty(list)) loop
with interrupts disabled thus
a core hung.

Avoid this by ensuring free_pcppages_bulk() is called with proper count of
pcp list pages.

The mentioned race is some what easily reproducible without [1] because
pcp's are not updated for the first memory block online and thus there is
a enough race window for P2 between alloc+free and pcp struct values
update through onlining of second memory block.

With [1], the race still exists but it is very narrow as we update the pcp
struct values for the first memory block online itself.

This is not limited to the movable zone, it could also happen in cases
with the normal zone (e.g., hotplug to a node that only has DMA memory, or
no other memory yet).

[1]: https://patchwork.kernel.org/patch/11696389/

Fixes: 5f8dcc21211a ("page-allocator: split per-cpu list into one-list-per-migrate-type")
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: <stable@vger.kernel.org> [2.6+]
Link: http://lkml.kernel.org/r/1597150703-19003-1-git-send-email-charante@codeaurora.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: include CMA pages in lowmem_reserve at boot

commit e08d3fdfe2dafa0331843f70ce1ff6c1c4900bf4 upstream.

The lowmem_reserve arrays provide a means of applying pressure against
allocations from lower zones that were targeted at higher zones.  Its
values are a function of the number of pages managed by higher zones and
are assigned by a call to the setup_per_zone_lowmem_reserve() function.

The function is initially called at boot time by the function
init_per_zone_wmark_min() and may be called later by accesses of the
/proc/sys/vm/lowmem_reserve_ratio sysctl file.

The function init_per_zone_wmark_min() was moved up from a module_init to
a core_initcall to resolve a sequencing issue with khugepaged.
Unfortunately this created a sequencing issue with CMA page accounting.

The CMA pages are added to the managed page count of a zone when
cma_init_reserved_areas() is called at boot also as a core_initcall.  This
makes it uncertain whether the CMA pages will be added to the managed page
counts of their zones before or after the call to
init_per_zone_wmark_min() as it becomes dependent on link order.  With the
current link order the pages are added to the managed count after the
lowmem_reserve arrays are initialized at boot.

This means the lowmem_reserve values at boot may be lower than the values
used later if /proc/sys/vm/lowmem_reserve_ratio is accessed even if the
ratio values are unchanged.

In many cases the difference is not significant, but for example
an ARM platform with 1GB of memory and the following memory layout

  cma: Reserved 256 MiB at 0x0000000030000000
  Zone ranges:
    DMA      [mem 0x0000000000000000-0x000000002fffffff]
    Normal   empty
    HighMem  [mem 0x0000000030000000-0x000000003fffffff]

would result in 0 lowmem_reserve for the DMA zone.  This would allow
userspace to deplete the DMA zone easily.

Funnily enough

  $ cat /proc/sys/vm/lowmem_reserve_ratio

would fix up the situation because as a side effect it forces
setup_per_zone_lowmem_reserve.

This commit breaks the link order dependency by invoking
init_per_zone_wmark_min() as a postcore_initcall so that the CMA pages
have the chance to be properly accounted in their zone(s) and allowing
the lowmem_reserve arrays to receive consistent values.

Fixes: bc22af74f271 ("mm: update min_free_kbytes from khugepaged after core initialization")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: David Rientjes <rientjes@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1597423766-27849-1-git-send-email-opendmb@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/relay.c: fix memleak on destroy relay channel

commit 71e843295c680898959b22dc877ae3839cc22470 upstream.

kmemleak report memory leak as follows:

  unreferenced object 0x607ee4e5f948 (size 8):
  comm "syz-executor.1", pid 2098, jiffies 4295031601 (age 288.468s)
  hex dump (first 8 bytes):
  00 00 00 00 00 00 00 00 ........
  backtrace:
     relay_open kernel/relay.c:583 [inline]
     relay_open+0xb6/0x970 kernel/relay.c:563
     do_blk_trace_setup+0x4a8/0xb20 kernel/trace/blktrace.c:557
     __blk_trace_setup+0xb6/0x150 kernel/trace/blktrace.c:597
     blk_trace_ioctl+0x146/0x280 kernel/trace/blktrace.c:738
     blkdev_ioctl+0xb2/0x6a0 block/ioctl.c:613
     block_ioctl+0xe5/0x120 fs/block_dev.c:1871
     vfs_ioctl fs/ioctl.c:48 [inline]
     __do_sys_ioctl fs/ioctl.c:753 [inline]
     __se_sys_ioctl fs/ioctl.c:739 [inline]
     __x64_sys_ioctl+0x170/0x1ce fs/ioctl.c:739
     do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46
     entry_SYSCALL_64_after_hwframe+0x44/0xa9

'chan->buf' is malloced in relay_open() by alloc_percpu() but not free
while destroy the relay channel.  Fix it by adding free_percpu() before
return from relay_destroy_channel().

Fixes: 017c59c042d0 ("relay: Use per CPU constructs for the relay channel buffer pointers")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: David Rientjes <rientjes@google.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Akash Goel <akash.goel@intel.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200817122826.48518-1-weiyongjun1@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

romfs: fix uninitialized memory leak in romfs_dev_read()

commit bcf85fcedfdd17911982a3e3564fcfec7b01eebd upstream.

romfs has a superblock field that limits the size of the filesystem; data
beyond that limit is never accessed.

romfs_dev_read() fetches a caller-supplied number of bytes from the
backing device. It returns 0 on success or an error code on failure;
therefore, its API can't represent short reads, it's all-or-nothing.

However, when romfs_dev_read() detects that the requested operation would
cross the filesystem size limit, it currently silently truncates the
requested number of bytes. This e.g. means that when the content of a
file with size 0x1000 starts one byte before the filesystem size limit,
->readpage() will only fill a single byte of the supplied page while
leaving the rest uninitialized, leaking that uninitialized memory to
userspace.

Fix it by returning an error code instead of truncating the read when the
requested read operation would go beyond the end of the filesystem.

Fixes: da4458bda237 ("NOMMU: Make it possible for RomFS to use MTD devices directly")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200818013202.2246365-1-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: sysfs: use NOFS for device creation

[ Upstream commit a47bd78d0c44621efb98b525d04d60dc4d1a79b0 ]

Dave hit this splat during testing btrfs/078:

  ======================================================
  WARNING: possible circular locking dependency detected
  5.8.0-rc6-default+ #1191 Not tainted
  ------------------------------------------------------
  kswapd0/75 is trying to acquire lock:
  ffffa040e9d04ff8 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]

  but task is already holding lock:
  ffffffff8b0c8040 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #2 (fs_reclaim){+.+.}-{0:0}:
__lock_acquire+0x56f/0xaa0
lock_acquire+0xa3/0x440
fs_reclaim_acquire.part.0+0x25/0x30
__kmalloc_track_caller+0x49/0x330
kstrdup+0x2e/0x60
__kernfs_new_node.constprop.0+0x44/0x250
kernfs_new_node+0x25/0x50
kernfs_create_link+0x34/0xa0
sysfs_do_create_link_sd+0x5e/0xd0
btrfs_sysfs_add_devices_dir+0x65/0x100 [btrfs]
btrfs_init_new_device+0x44c/0x12b0 [btrfs]
btrfs_ioctl+0xc3c/0x25c0 [btrfs]
ksys_ioctl+0x68/0xa0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x50/0xe0
entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #1 (&fs_info->chunk_mutex){+.+.}-{3:3}:
__lock_acquire+0x56f/0xaa0
lock_acquire+0xa3/0x440
__mutex_lock+0xa0/0xaf0
btrfs_chunk_alloc+0x137/0x3e0 [btrfs]
find_free_extent+0xb44/0xfb0 [btrfs]
btrfs_reserve_extent+0x9b/0x180 [btrfs]
btrfs_alloc_tree_block+0xc1/0x350 [btrfs]
alloc_tree_block_no_bg_flush+0x4a/0x60 [btrfs]
__btrfs_cow_block+0x143/0x7a0 [btrfs]
btrfs_cow_block+0x15f/0x310 [btrfs]
push_leaf_right+0x150/0x240 [btrfs]
split_leaf+0x3cd/0x6d0 [btrfs]
btrfs_search_slot+0xd14/0xf70 [btrfs]
btrfs_insert_empty_items+0x64/0xc0 [btrfs]
__btrfs_commit_inode_delayed_items+0xb2/0x840 [btrfs]
btrfs_async_run_delayed_root+0x10e/0x1d0 [btrfs]
btrfs_work_helper+0x2f9/0x650 [btrfs]
process_one_work+0x22c/0x600
worker_thread+0x50/0x3b0
kthread+0x137/0x150
ret_from_fork+0x1f/0x30

  -> #0 (&delayed_node->mutex){+.+.}-{3:3}:
check_prev_add+0x98/0xa20
validate_chain+0xa8c/0x2a00
__lock_acquire+0x56f/0xaa0
lock_acquire+0xa3/0x440
__mutex_lock+0xa0/0xaf0
__btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]
btrfs_evict_inode+0x3bf/0x560 [btrfs]
evict+0xd6/0x1c0
dispose_list+0x48/0x70
prune_icache_sb+0x54/0x80
super_cache_scan+0x121/0x1a0
do_shrink_slab+0x175/0x420
shrink_slab+0xb1/0x2e0
shrink_node+0x192/0x600
balance_pgdat+0x31f/0x750
kswapd+0x206/0x510
kthread+0x137/0x150
ret_from_fork+0x1f/0x30

  other info that might help us debug this:

  Chain exists of:
    &delayed_node->mutex --> &fs_info->chunk_mutex --> fs_reclaim

   Possible unsafe locking scenario:

CPU0                    CPU1
----                    ----
    lock(fs_reclaim);
lock(&fs_info->chunk_mutex);
lock(fs_reclaim);
    lock(&delayed_node->mutex);

   *** DEADLOCK ***

  3 locks held by kswapd0/75:
   #0: ffffffff8b0c8040 (fs_reclaim){+.+.}-{0:0}, at: __fs_reclaim_acquire+0x5/0x30
   #1: ffffffff8b0b50b8 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x54/0x2e0
   #2: ffffa040e057c0e8 (&type->s_umount_key#26){++++}-{3:3}, at: trylock_super+0x16/0x50

  stack backtrace:
  CPU: 2 PID: 75 Comm: kswapd0 Not tainted 5.8.0-rc6-default+ #1191
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
  Call Trace:
   dump_stack+0x78/0xa0
   check_noncircular+0x16f/0x190
   check_prev_add+0x98/0xa20
   validate_chain+0xa8c/0x2a00
   __lock_acquire+0x56f/0xaa0
   lock_acquire+0xa3/0x440
   ? __btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]
   __mutex_lock+0xa0/0xaf0
   ? __btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]
   ? __lock_acquire+0x56f/0xaa0
   ? __btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]
   ? lock_acquire+0xa3/0x440
   ? btrfs_evict_inode+0x138/0x560 [btrfs]
   ? btrfs_evict_inode+0x2fe/0x560 [btrfs]
   ? __btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]
   __btrfs_release_delayed_node.part.0+0x3f/0x310 [btrfs]
   btrfs_evict_inode+0x3bf/0x560 [btrfs]
   evict+0xd6/0x1c0
   dispose_list+0x48/0x70
   prune_icache_sb+0x54/0x80
   super_cache_scan+0x121/0x1a0
   do_shrink_slab+0x175/0x420
   shrink_slab+0xb1/0x2e0
   shrink_node+0x192/0x600
   balance_pgdat+0x31f/0x750
   kswapd+0x206/0x510
   ? _raw_spin_unlock_irqrestore+0x3e/0x50
   ? finish_wait+0x90/0x90
   ? balance_pgdat+0x750/0x750
   kthread+0x137/0x150
   ? kthread_stop+0x2a0/0x2a0
   ret_from_fork+0x1f/0x30

This is because we're holding the chunk_mutex while adding this device
and adding its sysfs entries.  We actually hold different locks in
different places when calling this function, the dev_replace semaphore
for instance in dev replace, so instead of moving this call around
simply wrap it's operations in NOFS.

CC: stable@vger.kernel.org # 4.14+
Reported-by: David Sterba <dsterba@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: inode: fix NULL pointer dereference if inode doesn't need compression

[ Upstream commit 1e6e238c3002ea3611465ce5f32777ddd6a40126 ]

[BUG]
There is a bug report of NULL pointer dereference caused in
compress_file_extent():

  Oops: Kernel access of bad area, sig: 11 [#1]
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  Workqueue: btrfs-delalloc btrfs_delalloc_helper [btrfs]
  NIP [c008000006dd4d34] compress_file_range.constprop.41+0x75c/0x8a0 [btrfs]
  LR [c008000006dd4d1c] compress_file_range.constprop.41+0x744/0x8a0 [btrfs]
  Call Trace:
  [c000000c69093b00] [c008000006dd4d1c] compress_file_range.constprop.41+0x744/0x8a0 [btrfs] (unreliable)
  [c000000c69093bd0] [c008000006dd4ebc] async_cow_start+0x44/0xa0 [btrfs]
  [c000000c69093c10] [c008000006e14824] normal_work_helper+0xdc/0x598 [btrfs]
  [c000000c69093c80] [c0000000001608c0] process_one_work+0x2c0/0x5b0
  [c000000c69093d10] [c000000000160c38] worker_thread+0x88/0x660
  [c000000c69093db0] [c00000000016b55c] kthread+0x1ac/0x1c0
  [c000000c69093e20] [c00000000000b660] ret_from_kernel_thread+0x5c/0x7c
  ---[ end trace f16954aa20d822f6 ]---

[CAUSE]
For the following execution route of compress_file_range(), it's
possible to hit NULL pointer dereference:

compress_file_extent()
|- pages = NULL;
|- start = async_chunk->start = 0;
|- end = async_chunk = 4095;
|- nr_pages = 1;
|- inode_need_compress() == false; <<< Possible, see later explanation
|  Now, we have nr_pages = 1, pages = NULL
|- cont:
|- ret = cow_file_range_inline();
|- if (ret <= 0) {
|- for (i = 0; i < nr_pages; i++) {
|- WARN_ON(pages[i]->mapping); <<< Crash

To enter above call execution branch, we need the following race:

    Thread 1 (chattr)     |            Thread 2 (writeback)
--------------------------+------------------------------
                          | btrfs_run_delalloc_range
                          | |- inode_need_compress = true
                          | |- cow_file_range_async()
btrfs_ioctl_set_flag()    |
|- binode_flags |=        |
   BTRFS_INODE_NOCOMPRESS |
                          | compress_file_range()
                          | |- inode_need_compress = false
                          | |- nr_page = 1 while pages = NULL
                          | |  Then hit the crash

[FIX]
This patch will fix it by checking @pages before doing accessing it.
This patch is only designed as a hot fix and easy to backport.

More elegant fix may make btrfs only check inode_need_compress() once to
avoid such race, but that would be another story.

Reported-by: Luciano Chavez <chavez@us.ibm.com>
Fixes: 4d3a800ebb12 ("btrfs: merge nr_pages input and output parameter in compress_pages")
CC: stable@vger.kernel.org # 4.14.x: cecc8d9038d16: btrfs: Move free_pages_out label in inline extent handling branch in compress_file_range
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: Move free_pages_out label in inline extent handling branch in compress_file_range

[ Upstream commit cecc8d9038d164eda61fbcd72520975a554ea63e ]

This label is only executed if compress_file_range fails to create an
inline extent. So move its code in the semantically related inline
extent handling branch. No functional changes.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: don't show full path of bind mounts in subvol=

[ Upstream commit 3ef3959b29c4a5bd65526ab310a1a18ae533172a ]

Chris Murphy reported a problem where rpm ostree will bind mount a bunch
of things for whatever voodoo it's doing.  But when it does this
/proc/mounts shows something like

  /dev/sda /mnt/test btrfs rw,relatime,subvolid=256,subvol=/foo 0 0
  /dev/sda /mnt/test/baz btrfs rw,relatime,subvolid=256,subvol=/foo/bar 0 0

Despite subvolid=256 being subvol=/foo.  This is because we're just
spitting out the dentry of the mount point, which in the case of bind
mounts is the source path for the mountpoint.  Instead we should spit
out the path to the actual subvol.  Fix this by looking up the name for
the subvolid we have mounted.  With this fix the same test looks like
this

  /dev/sda /mnt/test btrfs rw,relatime,subvolid=256,subvol=/foo 0 0
  /dev/sda /mnt/test/baz btrfs rw,relatime,subvolid=256,subvol=/foo 0 0

Reported-by: Chris Murphy <chris@colorremedies.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: export helpers for subvolume name/id resolution

[ Upstream commit c0c907a47dccf2cf26251a8fb4a8e7a3bf79ce84 ]

The functions will be used outside of export.c and super.c to allow
resolving subvolume name from a given id, eg. for subvolume deletion by
id ioctl.

Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ split from the next patch ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc: Allow 4224 bytes of stack expansion for the signal frame

[ Upstream commit 63dee5df43a31f3844efabc58972f0a206ca4534 ]

We have powerpc specific logic in our page fault handling to decide if
an access to an unmapped address below the stack pointer should expand
the stack VMA.

The code was originally added in 2004 "ported from 2.4". The rough
logic is that the stack is allowed to grow to 1MB with no extra
checking. Over 1MB the access must be within 2048 bytes of the stack
pointer, or be from a user instruction that updates the stack pointer.

The 2048 byte allowance below the stack pointer is there to cover the
288 byte "red zone" as well as the "about 1.5kB" needed by the signal
delivery code.

Unfortunately since then the signal frame has expanded, and is now
4224 bytes on 64-bit kernels with transactional memory enabled. This
means if a process has consumed more than 1MB of stack, and its stack
pointer lies less than 4224 bytes from the next page boundary, signal
delivery will fault when trying to expand the stack and the process
will see a SEGV.

The total size of the signal frame is the size of struct rt_sigframe
(which includes the red zone) plus __SIGNAL_FRAMESIZE (128 bytes on
64-bit).

The 2048 byte allowance was correct until 2008 as the signal frame
was:

struct rt_sigframe {
        struct ucontext    uc;                           /*     0  1440 */
        /* --- cacheline 11 boundary (1408 bytes) was 32 bytes ago --- */
        long unsigned int          _unused[2];           /*  1440    16 */
        unsigned int               tramp[6];             /*  1456    24 */
        struct siginfo *           pinfo;                /*  1480     8 */
        void *                     puc;                  /*  1488     8 */
        struct siginfo     info;                         /*  1496   128 */
        /* --- cacheline 12 boundary (1536 bytes) was 88 bytes ago --- */
        char                       abigap[288];          /*  1624   288 */

        /* size: 1920, cachelines: 15, members: 7 */
        /* padding: 8 */
};

1920 + 128 = 2048

Then in commit ce48b2100785 ("powerpc: Add VSX context save/restore,
ptrace and signal support") (Jul 2008) the signal frame expanded to
2304 bytes:

struct rt_sigframe {
        struct ucontext    uc;                           /*     0  1696 */ <--
        /* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
        long unsigned int          _unused[2];           /*  1696    16 */
        unsigned int               tramp[6];             /*  1712    24 */
        struct siginfo *           pinfo;                /*  1736     8 */
        void *                     puc;                  /*  1744     8 */
        struct siginfo     info;                         /*  1752   128 */
        /* --- cacheline 14 boundary (1792 bytes) was 88 bytes ago --- */
        char                       abigap[288];          /*  1880   288 */

        /* size: 2176, cachelines: 17, members: 7 */
        /* padding: 8 */
};

2176 + 128 = 2304

At this point we should have been exposed to the bug, though as far as
I know it was never reported. I no longer have a system old enough to
easily test on.

Then in 2010 commit 320b2b8de126 ("mm: keep a guard page below a
grow-down stack segment") caused our stack expansion code to never
trigger, as there was always a VMA found for a write up to PAGE_SIZE
below r1.

That meant the bug was hidden as we continued to expand the signal
frame in commit 2b0a576d15e0 ("powerpc: Add new transactional memory
state to the signal context") (Feb 2013):

struct rt_sigframe {
        struct ucontext    uc;                           /*     0  1696 */
        /* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
        struct ucontext    uc_transact;                  /*  1696  1696 */ <--
        /* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */
        long unsigned int          _unused[2];           /*  3392    16 */
        unsigned int               tramp[6];             /*  3408    24 */
        struct siginfo *           pinfo;                /*  3432     8 */
        void *                     puc;                  /*  3440     8 */
        struct siginfo     info;                         /*  3448   128 */
        /* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */
        char                       abigap[288];          /*  3576   288 */

        /* size: 3872, cachelines: 31, members: 8 */
        /* padding: 8 */
        /* last cacheline: 32 bytes */
};

3872 + 128 = 4000

And commit 573ebfa6601f ("powerpc: Increase stack redzone for 64-bit
userspace to 512 bytes") (Feb 2014):

struct rt_sigframe {
        struct ucontext    uc;                           /*     0  1696 */
        /* --- cacheline 13 boundary (1664 bytes) was 32 bytes ago --- */
        struct ucontext    uc_transact;                  /*  1696  1696 */
        /* --- cacheline 26 boundary (3328 bytes) was 64 bytes ago --- */
        long unsigned int          _unused[2];           /*  3392    16 */
        unsigned int               tramp[6];             /*  3408    24 */
        struct siginfo *           pinfo;                /*  3432     8 */
        void *                     puc;                  /*  3440     8 */
        struct siginfo     info;                         /*  3448   128 */
        /* --- cacheline 27 boundary (3456 bytes) was 120 bytes ago --- */
        char                       abigap[512];          /*  3576   512 */ <--

        /* size: 4096, cachelines: 32, members: 8 */
        /* padding: 8 */
};

4096 + 128 = 4224

Then finally in 2017, commit 1be7107fbe18 ("mm: larger stack guard
gap, between vmas") exposed us to the existing bug, because it changed
the stack VMA to be the correct/real size, meaning our stack expansion
code is now triggered.

Fix it by increasing the allowance to 4224 bytes.

Hard-coding 4224 is obviously unsafe against future expansions of the
signal frame in the same way as the existing code. We can't easily use
sizeof() because the signal frame structure is not in a header. We
will either fix that, or rip out all the custom stack expansion
checking logic entirely.

Fixes: ce48b2100785 ("powerpc: Add VSX context save/restore, ptrace and signal support")
Cc: stable@vger.kernel.org # v2.6.27+
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Tested-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200724092528.1578671-2-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/mm: Only read faulting instruction when necessary in do_page_fault()

[ Upstream commit 0e36b0d12501e278686634712975b785bae11641 ]

Commit a7a9dcd882a67 ("powerpc: Avoid taking a data miss on every
userspace instruction miss") has shown that limiting the read of
faulting instruction to likely cases improves performance.

This patch goes further into this direction by limiting the read
of the faulting instruction to the only cases where it is likely
needed.

On an MPC885, with the same benchmark app as in the commit referred
above, we see a reduction of about 3900 dTLB misses (approx 3%):

Before the patch:
Performance counter stats for './fault 500' (10 runs):

         683033312      cpu-cycles                                                    ( +-  0.03% )
            134538      dTLB-load-misses                                              ( +-  0.03% )
             46099      iTLB-load-misses                                              ( +-  0.02% )
             19681      faults                                                        ( +-  0.02% )

       5.389747878 seconds time elapsed                                          ( +-  0.06% )

With the patch:

Performance counter stats for './fault 500' (10 runs):

         682112862      cpu-cycles                                                    ( +-  0.03% )
            130619      dTLB-load-misses                                              ( +-  0.03% )
             46073      iTLB-load-misses                                              ( +-  0.05% )
             19681      faults                                                        ( +-  0.01% )

       5.381342641 seconds time elapsed                                          ( +-  0.07% )

The proper work of the huge stack expansion was tested with the
following app:

int main(int argc, char **argv)
{
char buf[1024 * 1025];

sprintf(buf, "Hello world !\n");
printf(buf);

exit(0);
}

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add include of pagemap.h to fix build errors]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

khugepaged: adjust VM_BUG_ON_MM() in __khugepaged_enter()

[ Upstream commit f3f99d63a8156c7a4a6b20aac22b53c5579c7dc1 ]

syzbot crashes on the VM_BUG_ON_MM(khugepaged_test_exit(mm), mm) in
__khugepaged_enter(): yes, when one thread is about to dump core, has set
core_state, and is waiting for others, another might do something calling
__khugepaged_enter(), which now crashes because I lumped the core_state
test (known as "mmget_still_valid") into khugepaged_test_exit(). I still
think it's best to lump them together, so just in this exceptional case,
check mm->mm_users directly instead of khugepaged_test_exit().

Fixes: bbe98f9cadff ("khugepaged: khugepaged_test_exit() check mmget_still_valid()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Yang Shi <shy828301@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: <stable@vger.kernel.org> [4.8+]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008141503370.18085@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

khugepaged: khugepaged_test_exit() check mmget_still_valid()

[ Upstream commit bbe98f9cadff58cdd6a4acaeba0efa8565dabe65 ]

Move collapse_huge_page()'s mmget_still_valid() check into
khugepaged_test_exit() itself.  collapse_huge_page() is used for anon THP
only, and earned its mmget_still_valid() check because it inserts a huge
pmd entry in place of the page table's pmd entry; whereas
collapse_file()'s retract_page_tables() or collapse_pte_mapped_thp()
merely clears the page table's pmd entry.  But core dumping without mmap
lock must have been as open to mistaking a racily cleared pmd entry for a
page table at physical page 0, as exit_mmap() was.  And we certainly have
no interest in mapping as a THP once dumping core.

Fixes: 59ea6d06cfa9 ("coredump: fix race condition between collapse_huge_page() and core dumping")
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org> [4.8+]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008021217020.27773@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf probe: Fix memory leakage when the probe point is not found

[ Upstream commit 12d572e785b15bc764e956caaa8a4c846fd15694 ]

Fix the memory leakage in debuginfo__find_trace_events() when the probe
point is not found in the debuginfo. If there is no probe point found in
the debuginfo, debuginfo__find_probes() will NOT return -ENOENT, but 0.

Thus the caller of debuginfo__find_probes() must check the tf.ntevs and
release the allocated memory for the array of struct probe_trace_event.

The current code releases the memory only if the debuginfo__find_probes()
hits an error but not checks tf.ntevs. In the result, the memory allocated
on *tevs are not released if tf.ntevs == 0.

This fixes the memory leakage by checking tf.ntevs == 0 in addition to
ret < 0.

Fixes: ff741783506c ("perf probe: Introduce debuginfo to encapsulate dwarf information")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/159438668346.62703.10887420400718492503.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vgem: Replace opencoded version of drm_gem_dumb_map_offset()

[ Upstream commit 119c53d2d4044c59c450c4f5a568d80b9d861856 ]

drm_gem_dumb_map_offset() now exists and does everything
vgem_gem_dump_map does and *ought* to do.

In particular, vgem_gem_dumb_map() was trying to reject mmapping an
imported dmabuf by checking the existence of obj->filp. Unfortunately,
we always allocated an obj->filp, even if unused for an imported dmabuf.
Instead, the drm_gem_dumb_map_offset(), since commit 90378e589192
("drm/gem: drm_gem_dumb_map_offset(): reject dma-buf"), uses the
obj->import_attach to reject such invalid mmaps.

This prevents vgem from allowing userspace mmapping the dumb handle and
attempting to incorrectly fault in remote pages belonging to another
device, where there may not even be a struct page.

v2: Use the default drm_gem_dumb_map_offset() callback

Fixes: af33a9190d02 ("drm/vgem: Enable dmabuf import interfaces")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.13+
Link: https://patchwork.freedesktop.org/patch/msgid/20200708154911.21236-1-chris@chris-wilson.co.uk
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.14.194

Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache: remove all obsolete writethrough-specific code

commit 9958f1d9a04efb3db19134482b3f4c6897e0e7b8 upstream.

Now that the writethrough code is much simpler there is no need to track
so much state or cascade bio submission (as was done, via
writethrough_endio(), to issue origin then cache IO in series).

As such the obsolete writethrough list and workqueue is also removed.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache: submit writethrough writes in parallel to origin and cache

commit 2df3bae9a6543e90042291707b8db0cbfbae9ee9 upstream.

Discontinue issuing writethrough write IO in series to the origin and
then cache.

Use bio_clone_fast() to create a new origin clone bio that will be
mapped to the origin device and then bio_chain() it to the bio that gets
remapped to the cache device. The origin clone bio does _not_ have a
copy of the per_bio_data -- as such check_if_tick_bio_needed() will not
be called.

The cache bio (parent bio) will not complete until the origin bio has
completed -- this fulfills bio_clone_fast()'s requirements as well as
the requirement to not complete the original IO until the write IO has
completed to both the origin and cache device.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm cache: pass cache structure to mode functions

commit 8e3c3827776fc93728c0c8d7c7b731226dc6ee23 upstream.

No functional changes, just a bit cleaner than passing cache_features
structure.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genirq/affinity: Make affinity setting if activated opt-in

commit f0c7baca180046824e07fc5f1326e83a8fd150c7 upstream.

John reported that on a RK3288 system the perf per CPU interrupts are all
affine to CPU0 and provided the analysis:

"It looks like what happens is that because the interrupts are not per-CPU
  in the hardware, armpmu_request_irq() calls irq_force_affinity() while
  the interrupt is deactivated and then request_irq() with IRQF_PERCPU |
  IRQF_NOBALANCING.

  Now when irq_startup() runs with IRQ_STARTUP_NORMAL, it calls
  irq_setup_affinity() which returns early because IRQF_PERCPU and
  IRQF_NOBALANCING are set, leaving the interrupt on its original CPU."

This was broken by the recent commit which blocked interrupt affinity
setting in hardware before activation of the interrupt. While this works in
general, it does not work for this particular case. As contrary to the
initial analysis not all interrupt chip drivers implement an activate
callback, the safe cure is to make the deferred interrupt affinity setting
at activation time opt-in.

Implement the necessary core logic and make the two irqchip implementations
for which this is required opt-in. In hindsight this would have been the
right thing to do, but ...

Fixes: baedb87d1b53 ("genirq/affinity: Handle affinity setting on inactive interrupts correctly")
Reported-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/87blk4tzgm.fsf@nanos.tec.linutronix.de
[fllinden@amazon.com - backported to 4.14]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

genirq/affinity: Handle affinity setting on inactive interrupts correctly

commit baedb87d1b53532f81b4bd0387f83b05d4f7eb9a upstream.

Setting interrupt affinity on inactive interrupts is inconsistent when
hierarchical irq domains are enabled. The core code should just store the
affinity and not call into the irq chip driver for inactive interrupts
because the chip drivers may not be in a state to handle such requests.

X86 has a hacky workaround for that but all other irq chips have not which
causes problems e.g. on GIC V3 ITS.

Instead of adding more ugly hacks all over the place, solve the problem in
the core code. If the affinity is set on an inactive interrupt then:

    - Store it in the irq descriptors affinity mask
    - Update the effective affinity to reflect that so user space has
      a consistent view
    - Don't call into the irq chip driver

This is the core equivalent of the X86 workaround and works correctly
because the affinity setting is established in the irq chip when the
interrupt is activated later on.

Note, that this is only effective when hierarchical irq domains are enabled
by the architecture. Doing it unconditionally would break legacy irq chip
implementations.

For hierarchial irq domains this works correctly as none of the drivers can
have a dependency on affinity setting in inactive state by design.

Remove the X86 workaround as it is not longer required.

Fixes: 02edee152d6e ("x86/apic/vector: Ignore set_affinity call for inactive interrupts")
Reported-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200529015501.15771-1-alisaidi@amazon.com
Link: https://lkml.kernel.org/r/877dv2rv25.fsf@nanos.tec.linutronix.de
[fllinden@amazon.com - 4.14 never had the x86 workaround, so skip x86 changes]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

khugepaged: retract_page_tables() remember to test exit

commit 18e77600f7a1ed69f8ce46c9e11cad0985712dfa upstream.

Only once have I seen this scenario (and forgot even to notice what forced
the eventual crash): a sequence of "BUG: Bad page map" alerts from
vm_normal_page(), from zap_pte_range() servicing exit_mmap();
pmd:00000000, pte values corresponding to data in physical page 0.

The pte mappings being zapped in this case were supposed to be from a huge
page of ext4 text (but could as well have been shmem): my belief is that
it was racing with collapse_file()'s retract_page_tables(), found *pmd
pointing to a page table, locked it, but *pmd had become 0 by the time
start_pte was decided.

In most cases, that possibility is excluded by holding mmap lock; but
exit_mmap() proceeds without mmap lock. Most of what's run by khugepaged
checks khugepaged_test_exit() after acquiring mmap lock:
khugepaged_collapse_pte_mapped_thps() and hugepage_vma_revalidate() do so,
for example. But retract_page_tables() did not: fix that.

The fix is for retract_page_tables() to check khugepaged_test_exit(),
after acquiring mmap lock, before doing anything to the page table.
Getting the mmap lock serializes with __mmput(), which briefly takes and
drops it in __khugepaged_exit(); then the khugepaged_test_exit() check on
mm_users makes sure we don't touch the page table once exit_mmap() might
reach it, since exit_mmap() will be proceeding without mmap lock, not
expecting anyone to be racing with it.

Fixes: f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: <stable@vger.kernel.org> [4.8+]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008021215400.27773@eggly.anvils
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sh: landisk: Add missing initialization of sh_io_port_base

[ Upstream commit 0c64a0dce51faa9c706fdf1f957d6f19878f4b81 ]

The Landisk setup code maps the CF IDE area using ioremap_prot(), and
passes the resulting virtual addresses to the pata_platform driver,
disguising them as I/O port addresses. Hence the pata_platform driver
translates them again using ioport_map().
As CONFIG_GENERIC_IOMAP=n, and CONFIG_HAS_IOPORT_MAP=y, the
SuperH-specific mapping code in arch/sh/kernel/ioport.c translates
I/O port addresses to virtual addresses by adding sh_io_port_base, which
defaults to -1, thus breaking the assumption of an identity mapping.

Fix this by setting sh_io_port_base to zero.

Fixes: 37b7a97884ba64bf ("sh: machvec IO death.")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools build feature: Quote CC and CXX for their arguments

[ Upstream commit fa5c893181ed2ca2f96552f50073786d2cfce6c0 ]

When using a cross-compilation environment, such as OpenEmbedded,
the CC an CXX variables are set to something more than just a
command: there are arguments (such as --sysroot) that need to be
passed on to the compiler so that the right set of headers and
libraries are used.

For the particular case that our systems detected, CC is set to
the following:

  export CC="aarch64-linaro-linux-gcc  --sysroot=/oe/build/tmp/work/machine/perf/1.0-r9/recipe-sysroot"

Without quotes, detection is as follows:

  Auto-detecting system features:
  ...                         dwarf: [ OFF ]
  ...            dwarf_getlocations: [ OFF ]
  ...                         glibc: [ OFF ]
  ...                          gtk2: [ OFF ]
  ...                        libbfd: [ OFF ]
  ...                        libcap: [ OFF ]
  ...                        libelf: [ OFF ]
  ...                       libnuma: [ OFF ]
  ...        numa_num_possible_cpus: [ OFF ]
  ...                       libperl: [ OFF ]
  ...                     libpython: [ OFF ]
  ...                     libcrypto: [ OFF ]
  ...                     libunwind: [ OFF ]
  ...            libdw-dwarf-unwind: [ OFF ]
  ...                          zlib: [ OFF ]
  ...                          lzma: [ OFF ]
  ...                     get_cpuid: [ OFF ]
  ...                           bpf: [ OFF ]
  ...                        libaio: [ OFF ]
  ...                       libzstd: [ OFF ]
  ...        disassembler-four-args: [ OFF ]

  Makefile.config:414: *** No gnu/libc-version.h found, please install glibc-dev[el].  Stop.
  Makefile.perf:230: recipe for target 'sub-make' failed
  make[1]: *** [sub-make] Error 2
  Makefile:69: recipe for target 'all' failed
  make: *** [all] Error 2

With CC and CXX quoted, some of those features are now detected.

Fixes: e3232c2f39ac ("tools build feature: Use CC and CXX from parent")
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Reviewed-by: Thomas Hebb <tommyhebb@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20200812221518.2869003-1-daniel.diaz@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf bench mem: Always memset source before memcpy

[ Upstream commit 1beaef29c34154ccdcb3f1ae557f6883eda18840 ]

For memcpy, the source pages are memset to zero only when --cycles is
used.  This leads to wildly different results with or without --cycles,
since all sources pages are likely to be mapped to the same zero page
without explicit writes.

Before this fix:

$ export cmd="./perf stat -e LLC-loads -- ./perf bench \
  mem memcpy -s 1024MB -l 100 -f default"
$ $cmd

         2,935,826      LLC-loads
       3.821677452 seconds time elapsed

$ $cmd --cycles

       217,533,436      LLC-loads
       8.616725985 seconds time elapsed

After this fix:

$ $cmd

       214,459,686      LLC-loads
       8.674301124 seconds time elapsed

$ $cmd --cycles

       214,758,651      LLC-loads
       8.644480006 seconds time elapsed

Fixes: 47b5757bac03c338 ("perf bench mem: Move boilerplate memory allocation to the infrastructure")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel@axis.com
Link: http://lore.kernel.org/lkml/20200810133404.30829-1-vincent.whitchurch@axis.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: echoaudio: Fix potential Oops in snd_echo_resume()

[ Upstream commit 5a25de6df789cc805a9b8ba7ab5deef5067af47e ]

Freeing chip on error may lead to an Oops at the next time
the system goes to resume. Fix this by removing all
snd_echo_free() calls on error.

Fixes: 47b5d028fdce8 ("ALSA: Echoaudio - Add suspend support #2")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20200813074632.17022-1-dinghao.liu@zju.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: dln2: Run event handler loop under spinlock

[ Upstream commit 3d858942250820b9adc35f963a257481d6d4c81d ]

The event handler loop must be run with interrupts disabled.
Otherwise we will have a warning:

[ 1970.785649] irq 31 handler lineevent_irq_handler+0x0/0x20 enabled interrupts
[ 1970.792739] WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:159 __handle_irq_event_percpu+0x162/0x170
[ 1970.860732] RIP: 0010:__handle_irq_event_percpu+0x162/0x170
...
[ 1970.946994] Call Trace:
[ 1970.949446]  <IRQ>
[ 1970.951471]  handle_irq_event_percpu+0x2c/0x80
[ 1970.955921]  handle_irq_event+0x23/0x43
[ 1970.959766]  handle_simple_irq+0x57/0x70
[ 1970.963695]  generic_handle_irq+0x42/0x50
[ 1970.967717]  dln2_rx+0xc1/0x210 [dln2]
[ 1970.971479]  ? usb_hcd_unmap_urb_for_dma+0xa6/0x1c0
[ 1970.976362]  __usb_hcd_giveback_urb+0x77/0xe0
[ 1970.980727]  usb_giveback_urb_bh+0x8e/0xe0
[ 1970.984837]  tasklet_action_common.isra.0+0x4a/0xe0
...

Recently xHCI driver switched to tasklets in the commit 36dc01657b49
("usb: host: xhci: Support running urb giveback in tasklet context").

The handle_irq_event_* functions are expected to be called with interrupts
disabled and they rightfully complain here because we run in tasklet context
with interrupts enabled.

Use a event spinlock to protect event handler from being interrupted.

Note, that there are only two users of this GPIO and ADC drivers and both of
them are using generic_handle_irq() which makes above happen.

Fixes: 338a12814297 ("mfd: Add support for Diolan DLN-2 devices")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

test_kmod: avoid potential double free in trigger_config_run_type()

[ Upstream commit 0776d1231bec0c7ab43baf440a3f5ef5f49dd795 ]

Reset the member "test_fs" of the test configuration after a call of the
function "kfree_const" to a null pointer so that a double memory release
will not be performed.

Fixes: d9c6a72d6fa2 ("kmod: add test driver to stress test the module loader")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: James Morris <jmorris@namei.org>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lars Ellenberg <lars.ellenberg@linbit.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Philipp Reisner <philipp.reisner@linbit.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Sergei Trofimovich <slyfox@gentoo.org>
Cc: Sergey Kvachonok <ravenexp@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tony Vroon <chainsaw@gentoo.org>
Cc: Christoph Hellwig <hch@infradead.org>
Link: http://lkml.kernel.org/r/20200610154923.27510-4-mcgrof@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/ufs: avoid potential u32 multiplication overflow

[ Upstream commit 88b2e9b06381551b707d980627ad0591191f7a2d ]

The 64 bit ino is being compared to the product of two u32 values,
however, the multiplication is being performed using a 32 bit multiply so
there is a potential of an overflow. To be fully safe, cast uspi->s_ncg
to a u64 to ensure a 64 bit multiplication occurs to avoid any chance of
overflow.

Fixes: f3e2a520f5fb ("ufs: NFS support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Link: http://lkml.kernel.org/r/20200715170355.1081713-1-colin.king@canonical.com
Addresses-Coverity: ("Unintentional integer overflow")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfs: Fix getxattr kernel panic and memory overflow

[ Upstream commit b4487b93545214a9db8cbf32e86411677b0cca21 ]

Move the buffer size check to decode_attr_security_label() before memcpy()
Only call memcpy() if the buffer is large enough

Fixes: aa9c2669626c ("NFS: Client implementation of Labeled-NFS")
Signed-off-by: Jeffrey Mitchell <jeffrey.mitchell@starlab.io>
[Trond: clean up duplicate test of label->len != 0]
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qcom/emac: add missed clk_disable_unprepare in error path of emac_clks_phase1_init

[ Upstream commit 50caa777a3a24d7027748e96265728ce748b41ef ]

Fix the missing clk_disable_unprepare() before return
from emac_clks_phase1_init() in the error handling case.

Fixes: b9b17debc69d ("net: emac: emac gigabit ethernet controller driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Acked-by: Timur Tabi <timur@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vmwgfx: Fix two list_for_each loop exit tests

[ Upstream commit 4437c1152ce0e57ab8f401aa696ea6291cc07ab1 ]

These if statements are supposed to be true if we ended the
list_for_each_entry() loops without hitting a break statement but they
don't work.

In the first loop, we increment "i" after the "if (i == unit)" condition
so we don't necessarily know that "i" is not equal to unit at the end of
the loop.

In the second loop we exit when mode is not pointing to a valid
drm_display_mode struct so it doesn't make sense to check "mode->type".

Fixes: a278724aa23c ("drm/vmwgfx: Implement fbdev on kms v2")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/vmwgfx: Use correct vmw_legacy_display_unit pointer

[ Upstream commit 1d2c0c565bc0da25f5e899a862fb58e612b222df ]

The "entry" pointer is an offset from the list head and it doesn't
point to a valid vmw_legacy_display_unit struct. Presumably the
intent was to point to the last entry.

Also the "i++" wasn't used so I have removed that as well.

Fixes: d7e1958dbe4a ("drm/vmwgfx: Support older hardware.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: sentelic - fix error return when fsp_reg_write fails

[ Upstream commit ea38f06e0291986eb93beb6d61fd413607a30ca4 ]

Currently when the call to fsp_reg_write fails -EIO is not being returned
because the count is being returned instead of the return value in retval.
Fix this by returning the value in retval instead of count.

Addresses-Coverity: ("Unused value")
Fixes: fc69f4a6af49 ("Input: add new driver for Sentelic Finger Sensing Pad")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200603141218.131663-1-colin.king@canonical.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: rcar: avoid race when unregistering slave

[ Upstream commit c7c9e914f9a0478fba4dc6f227cfd69cf84a4063 ]

Due to the lockless design of the driver, it is theoretically possible
to access a NULL pointer, if a slave interrupt was running while we were
unregistering the slave. To make this rock solid, disable the interrupt
for a short time while we are clearing the interrupt_enable register.
This patch is purely based on code inspection. The OOPS is super-hard to
trigger because clearing SAR (the address) makes interrupts even more
unlikely to happen as well. While here, reinit SCR to SDBS because this
bit should always be set according to documentation. There is no effect,
though, because the interface is disabled.

Fixes: 7b814d852af6 ("i2c: rcar: avoid race when unregistering slave client")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tools build feature: Use CC and CXX from parent

[ Upstream commit e3232c2f39acafd5a29128425bc30b9884642cfa ]

commit c8c188679ccf ("tools build: Use the same CC for feature detection
and actual build") changed these assignments from unconditional (:=) to
conditional (?=) so that they wouldn't clobber values from the
environment. However, conditional assignment does not work properly for
variables that Make implicitly sets, among which are CC and CXX. To
quote tools/scripts/Makefile.include, which handles this properly:

  # Makefiles suck: This macro sets a default value of $(2) for the
  # variable named by $(1), unless the variable has been set by
  # environment or command line. This is necessary for CC and AR
  # because make sets default values, so the simpler ?= approach
  # won't work as expected.

In other words, the conditional assignments will not run even if the
variables are not overridden in the environment; Make will set CC to
"cc" and CXX to "g++" when it starts[1], meaning the variables are not
empty by the time the conditional assignments are evaluated. This breaks
cross-compilation when CROSS_COMPILE is set but CC isn't, since "cc"
gets used for feature detection instead of the cross compiler (and
likewise for CXX).

To fix the issue, just pass down the values of CC and CXX computed by
the parent Makefile, which gets included by the Makefile that actually
builds whatever we're detecting features for and so is guaranteed to
have good values. This is a better solution anyway, since it means we
aren't trying to replicate the logic of the parent build system and so
don't risk it getting out of sync.

Leave PKG_CONFIG alone, since 1) there's no common logic to compute it
in Makefile.include, and 2) it's not an implicit variable, so
conditional assignment works properly.

[1] https://www.gnu.org/software/make/manual/html_node/Implicit-Variables.html

Fixes: c8c188679ccf ("tools build: Use the same CC for feature detection and actual build")
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: thomas hebb <tommyhebb@gmail.com>
Link: http://lore.kernel.org/lkml/0a6e69d1736b0fa231a648f50b0cce5d8a6734ef.1595822871.git.tommyhebb@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: bcm-iproc: handle clk_get_rate() return

[ Upstream commit 6ced5ff0be8e94871ba846dfbddf69d21363f3d7 ]

Handle clk_get_rate() returning 0 to avoid possible division by zero.

Fixes: daa5abc41c80 ("pwm: Add support for Broadcom iProc PWM controller")
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: clk-atlas6: fix return value check in atlas6_clk_init()

[ Upstream commit 12b90b40854a8461a02ef19f6f4474cc88d64b66 ]

In case of error, the function clk_register() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().

Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20200713032143.21362-1-vulab@iscas.ac.cn
Acked-by: Barry Song <baohua@kernel.org>
Fixes: 7bf21bc81f28 ("clk: sirf: re-arch to make the codes support both prima2 and atlas6")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: rcar: slave: only send STOP event when we have been addressed

[ Upstream commit 314139f9f0abdba61ed9a8463bbcb0bf900ac5a2 ]

When the SSR interrupt is activated, it will detect every STOP condition
on the bus, not only the ones after we have been addressed. So, enable
this interrupt only after we have been addressed, and disable it
otherwise.

Fixes: de20d1857dd6 ("i2c: rcar: add slave support")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Enforce PASID devTLB field mask

[ Upstream commit 5f77d6ca5ca74e4b4a5e2e010f7ff50c45dea326 ]

Set proper masks to avoid invalid input spillover to reserved bits.

Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200724014925.15523-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/omap: Check for failure of a call to omap_iommu_dump_ctx

[ Upstream commit dee9d154f40c58d02f69acdaa5cfd1eae6ebc28b ]

It is possible for the call to omap_iommu_dump_ctx to return
a negative error number, so check for the failure and return
the error number rather than pass the negative value to
simple_read_from_buffer.

Fixes: 14e0e6796a0d ("OMAP: iommu: add initial debugfs support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200714192211.744776-1-colin.king@canonical.com
Addresses-Coverity: ("Improper use of negative value")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm rq: don't call blk_mq_queue_stopped() in dm_stop_queue()

[ Upstream commit e766668c6cd49d741cfb49eaeb38998ba34d27bc ]

dm_stop_queue() only uses blk_mq_quiesce_queue() so it doesn't
formally stop the blk-mq queue; therefore there is no point making the
blk_mq_queue_stopped() check -- it will never be stopped.

In addition, even though dm_stop_queue() actually tries to quiesce hw
queues via blk_mq_quiesce_queue(), checking with blk_queue_quiesced()
to avoid unnecessary queue quiesce isn't reliable because: the
QUEUE_FLAG_QUIESCED flag is set before synchronize_rcu() and
dm_stop_queue() may be called when synchronize_rcu() from another
blk_mq_quiesce_queue() is in-progress.

Fixes: 7b17c2f7292ba ("dm: Fix a race condition related to stopping and starting queues")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpu: ipu-v3: image-convert: Combine rotate/no-rotate irq handlers

[ Upstream commit 0f6245f42ce9b7e4d20f2cda8d5f12b55a44d7d1 ]

Combine the rotate_irq() and norotate_irq() handlers into a single
eof_irq() handler.

Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: serial: ftdi_sio: clean up receive processing

[ Upstream commit ce054039ba5e47b75a3be02a00274e52b06a6456 ]

Clean up receive processing by dropping the character pointer and
keeping the length argument unchanged throughout the function.

Also make it more apparent that sysrq processing can consume a
characters by adding an explicit continue.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>