GitHub/LineageOS/G12/android_kernel_amlogic_linux-4.9.git
12 years agowl18xx: use new fw stats structures
Luciano Coelho [Thu, 10 May 2012 09:14:22 +0000 (12:14 +0300)]
wl18xx: use new fw stats structures

Some of the structures were updated, other structures had a few
missing values and a few new ones were added.  Change the driver
structs accordingly.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: increase tx_ba_win_size to 64
Luciano Coelho [Thu, 10 May 2012 09:14:21 +0000 (12:14 +0300)]
wl18xx: increase tx_ba_win_size to 64

Now the firmware can support TX block ack sessions with 64 frames.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowlcore: increase aggregation buffer size by one page
Luciano Coelho [Thu, 10 May 2012 09:14:20 +0000 (12:14 +0300)]
wlcore: increase aggregation buffer size by one page

With 4 pages (16Kb), we can't fit 10 frames in the aggregation buffer
during iperf.  This is the optimal for the firmware.  Thus, increase
the buffer size by one page.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowlcore/wl12xx/wl18xx: move lower driver debugfs to a subdir
Luciano Coelho [Thu, 10 May 2012 09:14:19 +0000 (12:14 +0300)]
wlcore/wl12xx/wl18xx: move lower driver debugfs to a subdir

Instead of adding more files from the lower drivers into the same
directory in debugfs as wlcore, we now add a subdirectory for the
lower driver.  This makes things a bit easier, because we can quickly
see where the debugfs entry is implemented and what is specific to the
lower driver.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: export pwr_limit_reference_11_abg value as a module parameter
Luciano Coelho [Thu, 10 May 2012 09:14:18 +0000 (12:14 +0300)]
wl18xx: export pwr_limit_reference_11_abg value as a module parameter

Yet another temporary module parameter requested by the firmware team.
This will be replaced by the conf binary.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: export low/high band component values as module params
Luciano Coelho [Thu, 10 May 2012 09:14:17 +0000 (12:14 +0300)]
wl18xx: export low/high band component values as module params

We use hardcoded values for the different board types.  In some cases
we may need to override the defaults, so export the values as module
params.  If not defined, the defaults for the specified board type
will be used.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: add power limit reference value to mac_and_phy settings
Luciano Coelho [Thu, 10 May 2012 09:14:16 +0000 (12:14 +0300)]
wl18xx: add power limit reference value to mac_and_phy settings

With more recent PHY firmware versions (>8.1.0.0.116), we need to use
the correct value for the pwr_limit_reference_11_abg parameter when
setting the mac_and_phy options.

For now we use a hardcoded 0xc8 as the value.  This will be moved to
the configuration binary when it gets implemented.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: add module parameter to force SISO 20MHz
Luciano Coelho [Thu, 10 May 2012 09:14:15 +0000 (12:14 +0300)]
wl18xx: add module parameter to force SISO 20MHz

In some cases it may be useful to force narrow-band SISO channels.
Add a new value to the ht_mode module parameter to force the device to
operate in SISO 20MHz.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowlcore: use proper values for supported local rates
Luciano Coelho [Thu, 10 May 2012 09:14:14 +0000 (12:14 +0300)]
wlcore: use proper values for supported local rates

We were setting all the rates bits when starting the AP role.  Instead
of doing this, we should set only the rates we really support
(eg. MIMO rates or wide-channel rates).  This commit changes that so
that we always use the default rates (basic rates + MCS0-7) and add
the values returned by the ap_get_mimo_wide_rate_mask operation.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: don't use MIMO when ht_mode is set to wide
Luciano Coelho [Thu, 10 May 2012 09:14:13 +0000 (12:14 +0300)]
wl18xx: don't use MIMO when ht_mode is set to wide

If the wl18xx module is loaded with ht_mode=wide (the default), we
shouldn't use MIMO rates when the channel type is not HT40.  Fix this
by checking the ht_mode before deciding which rates to used.
Additionally, set the ht_mode parameter explicitly to "wide" as the
default.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowlcore: print the interrupt status when recovery is triggered
Luciano Coelho [Thu, 10 May 2012 09:14:12 +0000 (12:14 +0300)]
wlcore: print the interrupt status when recovery is triggered

In some cases it may be useful for debugging to check what is the
status of the interrupt register when a hardware recovery happens.
Print the contents of REG_INTERRUPT_NO_CLEAR (aka. HINT_STS_RAW) when
recovery starts.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: print the PHY firmware version from the private static data
Luciano Coelho [Thu, 10 May 2012 09:14:11 +0000 (12:14 +0300)]
wl18xx: print the PHY firmware version from the private static data

The wl18xx firmware writes the PHY firmware version in the static
data.  Add an operation to parse the static data and print the PHY
firmware version when booting.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowlcore: create private static_data area and add operation to parse it
Luciano Coelho [Thu, 10 May 2012 09:14:10 +0000 (12:14 +0300)]
wlcore: create private static_data area and add operation to parse it

The wl18xx firmware has more information in the static_data than
wl12xx.  To be able to parse that in an abstracted way, this patch
adds a priv area to the static data struct and an operation that
allows the lower driver to parse it if necessary.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: implement fw status debugfs entries
Luciano Coelho [Thu, 10 May 2012 09:14:09 +0000 (12:14 +0300)]
wl18xx: implement fw status debugfs entries

Implement the operations that are necessary to fetch the
wl18xx-specific FW statistics and export them in debugfs.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl12xx: implement fw status debugfs entries
Luciano Coelho [Thu, 10 May 2012 09:14:08 +0000 (12:14 +0300)]
wl12xx: implement fw status debugfs entries

Implement the operations that are necessary to fetch the
wl12xx-specific FW statistics.  Re-add some of the code removed from
wlcore.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowlcore: add debugfs macro to help print fw statistics arrays
Luciano Coelho [Thu, 10 May 2012 09:14:07 +0000 (12:14 +0300)]
wlcore: add debugfs macro to help print fw statistics arrays

Add a macro to make it easy to print arrays from the FW statistics
array in debugfs.  At the same time, increase the buffer size so
arrays fit more easily.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowlcore: abstract debugfs fw_stats to be handled by the lower drivers
Luciano Coelho [Thu, 10 May 2012 09:14:06 +0000 (12:14 +0300)]
wlcore: abstract debugfs fw_stats to be handled by the lower drivers

The FW statistics differ from hardware to hardware.  This commit
prepares for hardware-specific implementation of the FW statistics
debugfs entries.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowlcore: use all AP basic rates as default
Luciano Coelho [Thu, 10 May 2012 09:14:05 +0000 (12:14 +0300)]
wlcore: use all AP basic rates as default

Sometimes we get a BSS_CHANGED_BEACON_ENABLED event before the basic
rates have been properly set.  To avoid problems with the firmware not
expecting to receive frames at rates that are not set during
CMD_START_ROLE, we now start with all basic rates by default.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowlcore: update beacon and probe_resp templates when rates change
Luciano Coelho [Thu, 10 May 2012 09:14:04 +0000 (12:14 +0300)]
wlcore: update beacon and probe_resp templates when rates change

When the data rates change, we get BSS_CHANGED_BASIC_RATES.  At this
point, we should update all the templates to match the new rates.  We
were changing some of the templates, but the beacon and the probe
response templates were missing.

[Remove redundant min_rate variable - Arik]

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: disable MCS_13 for wl18xx PG 1.0
Luciano Coelho [Thu, 10 May 2012 09:14:03 +0000 (12:14 +0300)]
wl18xx: disable MCS_13 for wl18xx PG 1.0

There are some problems with MCS_13 in PG 1.0 hardware.  So we disable
it when PG 1.0 is detected.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowlcore: reorder identify_chip and get_hw_info
Luciano Coelho [Thu, 10 May 2012 09:14:02 +0000 (12:14 +0300)]
wlcore: reorder identify_chip and get_hw_info

We can do get the HW information and identify the chip already at
probe time.  This makes it easier to mangle with the parameters during
identify chip before registering the hardware with mac80211.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: change low_band_component_type value for COM8
Luciano Coelho [Thu, 10 May 2012 09:14:01 +0000 (12:14 +0300)]
wl18xx: change low_band_component_type value for COM8

Like HDK, COM8 uses 0x06 for the low_band_component_type as well.
Hardcode the value for COM8 until this configuration can be done in
the external configuration binary (to be implemented).

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowlcore: add space for private area when allocating fw_status
Luciano Coelho [Thu, 10 May 2012 09:14:00 +0000 (12:14 +0300)]
wlcore: add space for private area when allocating fw_status

When allocating the fw_status structure, the space for the
lower-driver private area was missing.  This was causing an illegal
write outside the allocated area, which was causing random oopses
around the kernel.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: changed default board_type to HDK
Luciano Coelho [Thu, 10 May 2012 09:13:59 +0000 (12:13 +0300)]
wl18xx: changed default board_type to HDK

Since the most common board we're using now is an HDK board, change
the default board_type to hdk.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: copy the default configuration before checking the board_type
Luciano Coelho [Thu, 10 May 2012 09:13:58 +0000 (12:13 +0300)]
wl18xx: copy the default configuration before checking the board_type

We were changing the low_band_component_type in the private
configuration structure before copying the default values to it, so
the change was overwritten and only took effect after HW recovery.

Reported-by: Dror Erez <drorer@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowlcore: add module parameter to dump SDIO reads and writes
Luciano Coelho [Thu, 10 May 2012 09:13:57 +0000 (12:13 +0300)]
wlcore: add module parameter to dump SDIO reads and writes

In some cases we may want to dump all the SDIO data in order to get
detailed information for debugging the communication with the
firmware.

Add printks to dump the data and a module parameter to enable/disable
it.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: add a module parameter to control 11a support
Luciano Coelho [Thu, 10 May 2012 09:13:56 +0000 (12:13 +0300)]
wl18xx: add a module parameter to control 11a support

In wl18xx we don't have an NVS yet, so we need to control whether 11a
is supported with a module parameter for now.  11a support is enabled
by default and can be changed by setting enable_11a to false when
loading the module.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: derive the MAC address from the BD_ADDR in fuse ROM
Luciano Coelho [Thu, 10 May 2012 09:13:55 +0000 (12:13 +0300)]
wl18xx: derive the MAC address from the BD_ADDR in fuse ROM

Add the get_mac operation in order to fetch the BD_ADDR from fuse ROM,
so that we can derive the WLAN MAC addresses from it.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowlcore/wl12xx/18xx: split fw_status struct into two
Arik Nemtsov [Thu, 10 May 2012 09:13:54 +0000 (12:13 +0300)]
wlcore/wl12xx/18xx: split fw_status struct into two

The number of RX packet descriptors may vary from chip to chip and
in different firmware versions.  Unfortunately, the array that
contains the actual descriptors is in the middle of the fw_status
structure.  To manage this, we split the struct into two so we can
calculate the offset of what comes after the array and access the last
elements more easily.

[Changed the STATUS_LEN macro to be placement agnostic - Arik]

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: add module parameter to disable TCP checksum
Luciano Coelho [Thu, 10 May 2012 09:13:53 +0000 (12:13 +0300)]
wl18xx: add module parameter to disable TCP checksum

Add a new module parameter to disable TCP checksum offload.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: add number of antennas and dc2dc type as module params
Luciano Coelho [Thu, 10 May 2012 09:13:52 +0000 (12:13 +0300)]
wl18xx: add number of antennas and dc2dc type as module params

We need to specify the number of 2.4GHz and 5GHz antennas and whether
the board has an internal or external DC2DC.  Add some module
parameters that allow changing that.

In the future this will come from the "NVS" file.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: change the low_band_component_type for HDK boards
Luciano Coelho [Thu, 10 May 2012 09:13:51 +0000 (12:13 +0300)]
wl18xx: change the low_band_component_type for HDK boards

Currently, all HDK boards use low_band_component_type 0x06.  In the
future this may change, but for now, we hardcode this value when the
board_type is set to HDK.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: add plt_init operation
Luciano Coelho [Thu, 10 May 2012 09:13:50 +0000 (12:13 +0300)]
wl18xx: add plt_init operation

Add the correct FW name for PLT (which is the same as the normal
firmware) and implement the plt_init operation.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowlcore/wl12xx: add plt_init op and move the code to wl12xx
Luciano Coelho [Thu, 10 May 2012 09:13:49 +0000 (12:13 +0300)]
wlcore/wl12xx: add plt_init op and move the code to wl12xx

PLT mode needs to be initialized differently for each chip.  This
patch adds an operation to init PLT and moves the existing PLT
initialization into the wl12xx driver.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: change board type enum according to new FW
Arik Nemtsov [Thu, 10 May 2012 09:13:48 +0000 (12:13 +0300)]
wl18xx: change board type enum according to new FW

Add more board types and remove a now unneeded write to SCR_PAD2 setting
the board type.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: don't upload NVS to FW
Arik Nemtsov [Thu, 10 May 2012 09:13:47 +0000 (12:13 +0300)]
wl18xx: don't upload NVS to FW

In this chip family the NVS file should not be uploaded to FW. In fact,
we encounter strange bugs (sdio errors) when trying to upload it with
certain parameters.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: init Tx-released index to 0 on HW init
Arik Nemtsov [Thu, 10 May 2012 09:13:46 +0000 (12:13 +0300)]
wl18xx: init Tx-released index to 0 on HW init

This ensures the index is 0 on FW recovery and prevents spurious error
prints - "WARNING illegal id in tx completion".

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowlcore/wl12xx: move rx_mem_pool_addr element to wl12xx
Luciano Coelho [Thu, 10 May 2012 09:13:45 +0000 (12:13 +0300)]
wlcore/wl12xx: move rx_mem_pool_addr element to wl12xx

Only wl127x chips use the rx_mem_pool_addr values, which need to be
given to the firmware as part of the RX path.  Move this from core to
the wl12xx driver.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: implement hw op to read PG version
Arik Nemtsov [Thu, 10 May 2012 09:13:44 +0000 (12:13 +0300)]
wl18xx: implement hw op to read PG version

Read the HW PG version of the 18xx chip from FUSE.

Based on an earlier patch by Luciano Coelho <coelho@ti.com>.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowlcore/wl12xx: move ref_clock and tcxo_clock elements to wl12xx
Luciano Coelho [Thu, 10 May 2012 09:13:43 +0000 (12:13 +0300)]
wlcore/wl12xx: move ref_clock and tcxo_clock elements to wl12xx

Only wl12xx needs to get the ref_clock anc tcxo_clock values from the
platform data.  Move these elements from the wl1271 structure to
wl12xx's private data.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowlcore: rename wl12xx.h to wlcore_i.h
Luciano Coelho [Thu, 10 May 2012 09:13:42 +0000 (12:13 +0300)]
wlcore: rename wl12xx.h to wlcore_i.h

The wl12xx.h file now contains mostly definitions that are internal to
wlcore.  Still, some things need to me moved to the public header, so
for now we keep including it in wlcore.h.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: read clock frequency and do top init accordingly
Luciano Coelho [Thu, 10 May 2012 09:13:41 +0000 (12:13 +0300)]
wl18xx: read clock frequency and do top init accordingly

Instead of using hardcoded values for a single frequency, we need to
read the frequency and use the appropriate values for it in the top
initialization.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: disable FW log functionality
Arik Nemtsov [Thu, 10 May 2012 09:13:40 +0000 (12:13 +0300)]
wl18xx: disable FW log functionality

Currently (Fw .67) appears to do more harm than good.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: read FW pc on recovery
Arik Nemtsov [Thu, 10 May 2012 09:13:39 +0000 (12:13 +0300)]
wl18xx: read FW pc on recovery

Define the FW pc in the 18xx register translation table. This specific
register is only valid in the boot partition, so change the momentarily
change partitions. This doesn't damage 12xx cards, where the FW pc is
accessible via boot partition as well.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: translate and write the board type to SCR_PAD2
Luciano Coelho [Thu, 10 May 2012 09:13:38 +0000 (12:13 +0300)]
wl18xx: translate and write the board type to SCR_PAD2

The firmware uses the SCR_PAD2 register to read the board type passed
from the driver.  The values don't match the ones used in the mac and
phy configuration, so we need to map them before writing.  This commit
adds a translation table that is used when writing the board type to
SCR_PAD2.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: add board type module argument
Luciano Coelho [Thu, 10 May 2012 09:13:37 +0000 (12:13 +0300)]
wl18xx: add board type module argument

Different board types (ie. FPGA, HDK and DVP/EVB) require slightly
different init configuration options.  Since we cannot probe the type
of board from the actual hardware, we need to pass it as an option
during module load.

This patch adds a module parameters that accepts the 3 different board
types, with DVP/EVB as the default, and uses this value where needed.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: add module param for overriding HT caps
Arik Nemtsov [Thu, 10 May 2012 09:13:36 +0000 (12:13 +0300)]
wl18xx: add module param for overriding HT caps

Set an alternate HT cap allowing MIMO rates (but only 20mhz) channels,
when the module is loaded with ht_mode=mimo.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: set HT capabilities
Arik Nemtsov [Thu, 10 May 2012 09:13:35 +0000 (12:13 +0300)]
wl18xx: set HT capabilities

Define the default HT capabilities of the 18xx chip family - these include
support for wide-channel.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowlcore/wl18xx: enable MIMO/wide-chan rates in AP-mode rate config
Arik Nemtsov [Thu, 10 May 2012 09:13:34 +0000 (12:13 +0300)]
wlcore/wl18xx: enable MIMO/wide-chan rates in AP-mode rate config

Add a HW op to add extra enabled rates for AP-mode data-rates. Since
the rates might depend on channel properties, reconfigure AP-mode rates
when these change.

Implement the HW op for the 18xx family, where MIMO or wide-chan rates
can be added.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowlcore: support peer MIMO rates
Arik Nemtsov [Thu, 10 May 2012 09:13:33 +0000 (12:13 +0300)]
wlcore: support peer MIMO rates

Parse the peer ht_cap element containing MCS8-MCS15 rates and pass it
to the FW. Rates unsupported by the HW will be sanitized by mac80211
before reaching us.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: ipmlement ap_rate_mask hw op
Arik Nemtsov [Thu, 10 May 2012 09:13:32 +0000 (12:13 +0300)]
wl18xx: ipmlement ap_rate_mask hw op

Enable wide-chan or MIMO rates when appropriate.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: send channel type to FW on role start
Arik Nemtsov [Thu, 10 May 2012 09:13:31 +0000 (12:13 +0300)]
wl18xx: send channel type to FW on role start

Translate the NL80211 channel type to a FW-specific channel type and send
it to the FW as part of the role-start command. For wl12xx this has no
effect - this element is treated as padding.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowlcore: track current channel type per vif
Arik Nemtsov [Thu, 10 May 2012 09:13:30 +0000 (12:13 +0300)]
wlcore: track current channel type per vif

Track the current 802.11 channel type, defaulting to a NO_HT channel.
Update the channel type element when changed by mac80211.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: add runtime configuration parameters
Luciano Coelho [Thu, 10 May 2012 09:13:29 +0000 (12:13 +0300)]
wl18xx: add runtime configuration parameters

Now wlcore requires the lower drivers to set the correct
configuration.  Move the existing private configuration to the proper
place and add all generic configuration parameters.

The important changes are in Tx interrupt pacing and Rx BA window size.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowlcore/wl18xx: add hw op for Rx HW checksum
Arik Nemtsov [Thu, 10 May 2012 09:13:28 +0000 (12:13 +0300)]
wlcore/wl18xx: add hw op for Rx HW checksum

Some chip families can checksum certain classes of Rx packets in FW.
Implement the Rx-checksum feature as a HW-op. For the 18xx chip-family,
set Rx-checsum according to indication from FW.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowlcore/wl18xx: add hw op for setting Tx HW checksum
Arik Nemtsov [Thu, 10 May 2012 09:13:27 +0000 (12:13 +0300)]
wlcore/wl18xx: add hw op for setting Tx HW checksum

Some chip families are capable of checksumming certain classes of Tx
packets in HW. Indicate this fact in the netdev features and perform the
HW checksum by protocol type for the 18xx family.

Fix the location of the skb network header when we move it so we can
rely on it when setting the checksum.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: add hw_init operation
Luciano Coelho [Thu, 10 May 2012 09:13:26 +0000 (12:13 +0300)]
wl18xx: add hw_init operation

Add wl18xx-specific HW initialization operation and create acx.[ch]
files to support that.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: implement immediate Tx completion
Arik Nemtsov [Thu, 10 May 2012 09:13:25 +0000 (12:13 +0300)]
wl18xx: implement immediate Tx completion

Implement immediate Tx completion for the 18xx family. Move 18xx
specific Tx code to new tx.c/h files and create helper header files
for definitions.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: implement hw op for getting rx packet data length
Arik Nemtsov [Thu, 10 May 2012 09:13:24 +0000 (12:13 +0300)]
wl18xx: implement hw op for getting rx packet data length

Implement the 18xx-specific way for getting the length of a Rx packet.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: implement hw op for getting rx buffer data alignment
Arik Nemtsov [Thu, 10 May 2012 09:13:23 +0000 (12:13 +0300)]
wl18xx: implement hw op for getting rx buffer data alignment

Implement the HW op for getting alignment state in wl18xx. The FW aligns
the Rx Ethernet payload data.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: set Rx block-size alignment quirk
Arik Nemtsov [Thu, 10 May 2012 09:13:22 +0000 (12:13 +0300)]
wl18xx: set Rx block-size alignment quirk

The 18xx FW sends Rx blocks with aligned length.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: add fw_status private data
Arik Nemtsov [Thu, 10 May 2012 09:13:21 +0000 (12:13 +0300)]
wl18xx: add fw_status private data

The wl18xx chip passes extra information in the firmware status to the
driver.  Add a private data section to handle that.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: define HW-rate translation elements/tables
Arik Nemtsov [Thu, 10 May 2012 09:13:20 +0000 (12:13 +0300)]
wl18xx: define HW-rate translation elements/tables

Define HW-rate conversion tables for the 18xx chip. Initialize
the appropriate wlcore elements with these tables and values to allow
conversion of HW-rates.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: implement hw op for setting frame length in tx_hw_desc
Arik Nemtsov [Thu, 10 May 2012 09:13:19 +0000 (12:13 +0300)]
wl18xx: implement hw op for setting frame length in tx_hw_desc

Set the frame length during Tx in a way compatible with the 18xx FW.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: implement hw op for setting blocks in hw_tx_desc
Arik Nemtsov [Thu, 10 May 2012 09:13:18 +0000 (12:13 +0300)]
wl18xx: implement hw op for setting blocks in hw_tx_desc

Add the 18xx variant to the HW Tx descriptor union and set the 18xx
specific values during Tx.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: implement hw op for calculating hw block count per packet
Arik Nemtsov [Thu, 10 May 2012 09:13:17 +0000 (12:13 +0300)]
wl18xx: implement hw op for calculating hw block count per packet

Implement the calc_tx_blocks op for the 18xx family.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: set normal/GEM Tx spare block counts
Arik Nemtsov [Thu, 10 May 2012 09:13:16 +0000 (12:13 +0300)]
wl18xx: set normal/GEM Tx spare block counts

Initialize the Tx spare block counts for all operating modes in the 18xx
card.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: set the number of Tx descriptors
Arik Nemtsov [Thu, 10 May 2012 09:13:15 +0000 (12:13 +0300)]
wl18xx: set the number of Tx descriptors

Initialize the number of Tx-descriptors for the 18xx family.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: create per-chip-family private storage
Arik Nemtsov [Thu, 10 May 2012 09:13:14 +0000 (12:13 +0300)]
wl18xx: create per-chip-family private storage

Make use of the wlcore provided private storage in the 18xx low-level
driver.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: add trigger command and ack event operations
Luciano Coelho [Thu, 10 May 2012 09:13:13 +0000 (12:13 +0300)]
wl18xx: add trigger command and ack event operations

Add the operations that allow wlcore to trigger commands to the
firmware and acknowledge when an event has been fully received.

Allocate a private buffer to hold the maximum sized cmd. Send the
entire length of the buffer each time a command is sent to signal
EOT. Remove the previous EOT mechanism.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: add some boot operations and hw-specific configurations
Luciano Coelho [Thu, 10 May 2012 09:13:12 +0000 (12:13 +0300)]
wl18xx: add some boot operations and hw-specific configurations

Implement the boot operation.  Add a wl18xx-specific configuration
structure (namely to configure the mac and phy parameters).

The default hw configuration matches the DVP board.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: add identify chip operation
Luciano Coelho [Thu, 10 May 2012 09:13:11 +0000 (12:13 +0300)]
wl18xx: add identify chip operation

Add identify_chip operation to detect the chip ID for wl185x and set
the correct firmware name.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: add register table
Luciano Coelho [Thu, 10 May 2012 09:13:10 +0000 (12:13 +0300)]
wl18xx: add register table

Add the register table with the appropriate values for wl18xx.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: add partition table
Luciano Coelho [Thu, 10 May 2012 09:13:09 +0000 (12:13 +0300)]
wl18xx: add partition table

Define and add the partition table in the wlcore struct.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: add empty operations struct
Luciano Coelho [Thu, 10 May 2012 09:13:08 +0000 (12:13 +0300)]
wl18xx: add empty operations struct

We don't have any chip-specific operations yet, but now wlcore has
defined an operations structure and requires the pointer to be set.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowlcore_sdio/wl18xx: use SDIO revision number to identify wl18xx chips
Luciano Coelho [Thu, 10 May 2012 09:13:07 +0000 (12:13 +0300)]
wlcore_sdio/wl18xx: use SDIO revision number to identify wl18xx chips

At least in PG1, the wl18xx chips use the same SDIO vendor/device ID,
so it's not possible to figure out which driver is to be used.  As a
workaround, we can check the SDIO revision number, because wl18xx uses
3.00 and wl12xx does not.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agowl18xx: add new module
Luciano Coelho [Thu, 10 May 2012 09:13:06 +0000 (12:13 +0300)]
wl18xx: add new module

Add the wl18xx module and the probe functions.  Use wlcore for the
main parts (not functional at this point due to differences in the
wl18xx initialization).

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
12 years agoLinux 3.5-rc1
Linus Torvalds [Sun, 3 Jun 2012 01:29:26 +0000 (18:29 -0700)]
Linux 3.5-rc1

12 years agoMerge tag 'dm-3.5-changes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agk...
Linus Torvalds [Sun, 3 Jun 2012 00:39:40 +0000 (17:39 -0700)]
Merge tag 'dm-3.5-changes-1' of git://git./linux/kernel/git/agk/linux-dm

Pull device-mapper updates from Alasdair G Kergon:
 "Improve multipath's retrying mechanism in some defined circumstances
  and provide a simple reserve/release mechanism for userspace tools to
  access thin provisioning metadata while the pool is in use."

* tag 'dm-3.5-changes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm thin: provide userspace access to pool metadata
  dm thin: use slab mempools
  dm mpath: allow ioctls to trigger pg init
  dm mpath: delay retry of bypassed pg
  dm mpath: reduce size of struct multipath

12 years agodm thin: provide userspace access to pool metadata
Joe Thornber [Sat, 2 Jun 2012 23:30:01 +0000 (00:30 +0100)]
dm thin: provide userspace access to pool metadata

This patch implements two new messages that can be sent to the thin
pool target allowing it to take a snapshot of the _metadata_.  This,
read-only snapshot can be accessed by userland, concurrently with the
live target.

Only one metadata snapshot can be held at a time.  The pool's status
line will give the block location for the current msnap.

Since version 0.1.5 of the userland thin provisioning tools, the
thin_dump program displays the msnap as follows:

    thin_dump -m <msnap root> <metadata dev>

Available here: https://github.com/jthornber/thin-provisioning-tools

Now that userland can access the metadata we can do various things
that have traditionally been kernel side tasks:

     i) Incremental backups.

     By using metadata snapshots we can work out what blocks have
     changed over time.  Combined with data snapshots we can ensure
     the data doesn't change while we back it up.

     A short proof of concept script can be found here:

     https://github.com/jthornber/thinp-test-suite/blob/master/incremental_backup_example.rb

     ii) Migration of thin devices from one pool to another.

     iii) Merging snapshots back into an external origin.

     iv) Asyncronous replication.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
12 years agodm thin: use slab mempools
Mike Snitzer [Sat, 2 Jun 2012 23:30:00 +0000 (00:30 +0100)]
dm thin: use slab mempools

Use dedicated caches prefixed with a "dm_" name rather than relying on
kmalloc mempools backed by generic slab caches so the memory usage of
thin provisioning (and any leaks) can be accounted for independently.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
12 years agodm mpath: allow ioctls to trigger pg init
Mikulas Patocka [Sat, 2 Jun 2012 23:29:58 +0000 (00:29 +0100)]
dm mpath: allow ioctls to trigger pg init

After the failure of a group of paths, any alternative paths that
need initialising do not become available until further I/O is sent to
the device.  Until this has happened, ioctls return -EAGAIN.

With this patch, new paths are made available in response to an ioctl
too.  The processing of the ioctl gets delayed until this has happened.

Instead of returning an error, we submit a work item to kmultipathd
(that will potentially activate the new path) and retry in ten
milliseconds.

Note that the patch doesn't retry an ioctl if the ioctl itself fails due
to a path failure.  Such retries should be handled intelligently by the
code that generated the ioctl in the first place, noting that some SCSI
commands should not be retried because they are not idempotent (XOR write
commands).  For commands that could be retried, there is a danger that
if the device rejected the SCSI command, the path could be errorneously
marked as failed, and the request would be retried on another path which
might fail too.  It can be determined if the failure happens on the
device or on the SCSI controller, but there is no guarantee that all
SCSI drivers set these flags correctly.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
12 years agodm mpath: delay retry of bypassed pg
Mike Christie [Sat, 2 Jun 2012 23:29:45 +0000 (00:29 +0100)]
dm mpath: delay retry of bypassed pg

If I/O needs retrying and only bypassed priority groups are available,
set the pg_init_delay_retry flag to wait before retrying.

If, for example, the reason for the bypass is that the controller is
getting reset or there is a firmware upgrade happening, retrying right
away would cause a flood of log messages and retries for what could be a
few seconds or even several minutes.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
12 years agodm mpath: reduce size of struct multipath
Mike Snitzer [Sat, 2 Jun 2012 23:29:43 +0000 (00:29 +0100)]
dm mpath: reduce size of struct multipath

Move multipath structure's 'lock' and 'queue_size' members to eliminate
two 4-byte holes.  Also use a bit within a single unsigned int for each
existing flag (saves 8-bytes).  This allows future flags to be added
without each consuming an unsigned int.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Sat, 2 Jun 2012 23:22:51 +0000 (16:22 -0700)]
Merge git://git./linux/kernel/git/davem/net

Pull networking updates from David Miller:

 1) Make syn floods consume significantly less resources by

    a) Not pre-COW'ing routing metrics for SYN/ACKs
    b) Mirroring the device queue mapping of the SYN for the SYN/ACK
       reply.

    Both from Eric Dumazet.

 2) Fix calculation errors in Byte Queue Limiting, from Hiroaki SHIMODA.

 3) Validate the length requested when building a paged SKB for a
    socket, so we don't overrun the page vector accidently.  From Jason
    Wang.

 4) When netlabel is disabled, we abort all IP option processing when we
    see a CIPSO option.  This isn't the right thing to do, we should
    simply skip over it and continue processing the remaining options
    (if any).  Fix from Paul Moore.

 5) SRIOV fixes for the mellanox driver from Jack orgenstein and Marcel
    Apfelbaum.

 6) 8139cp enables the receiver before the ring address is properly
    programmed, which potentially lets the device crap over random
    memory.  Fix from Jason Wang.

 7) e1000/e1000e fixes for i217 RST handling, and an improper buffer
    address reference in jumbo RX frame processing from Bruce Allan and
    Sebastian Andrzej Siewior, respectively.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  fec_mpc52xx: fix timestamp filtering
  mcs7830: Implement link state detection
  e1000e: fix Rapid Start Technology support for i217
  e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats()
  r8169: call netif_napi_del at errpaths and at driver unload
  tcp: reflect SYN queue_mapping into SYNACK packets
  tcp: do not create inetpeer on SYNACK message
  8139cp/8139too: terminate the eeprom access with the right opmode
  8139cp: set ring address before enabling receiver
  cipso: handle CIPSO options correctly when NetLabel is disabled
  net: sock: validate data_len before allocating skb in sock_alloc_send_pskb()
  bql: Avoid possible inconsistent calculation.
  bql: Avoid unneeded limit decrement.
  bql: Fix POSDIFF() to integer overflow aware.
  net/mlx4_core: Fix obscure mlx4_cmd_box parameter in QUERY_DEV_CAP
  net/mlx4_core: Check port out-of-range before using in mlx4_slave_cap
  net/mlx4_core: Fixes for VF / Guest startup flow
  net/mlx4_en: Fix improper use of "port" parameter in mlx4_en_event
  net/mlx4_core: Fix number of EQs used in ICM initialisation
  net/mlx4_core: Fix the slave_id out-of-range test in mlx4_eq_int

12 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 2 Jun 2012 23:17:03 +0000 (16:17 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull straggler x86 fixes from Peter Anvin:
 "Three groups of patches:

  - EFI boot stub documentation and the ability to print error messages;
  - Removal for PTRACE_ARCH_PRCTL for x32 (obsolete interface which
    should never have been ported, and the port is broken and
    potentially dangerous.)
  - ftrace stack corruption fixes.  I'm not super-happy about the
    technical implementation, but it is probably the least invasive in
    the short term.  In the future I would like a single method for
    nesting the debug stack, however."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, x32, ptrace: Remove PTRACE_ARCH_PRCTL for x32
  x86, efi: Add EFI boot stub documentation
  x86, efi; Add EFI boot stub console support
  x86, efi: Only close open files in error path
  ftrace/x86: Do not change stacks in DEBUG when calling lockdep
  x86: Allow nesting of the debug stack IDT setting
  x86: Reset the debug_stack update counter
  ftrace: Use breakpoint method to update ftrace caller
  ftrace: Synchronize variable setting with breakpoints

12 years agotty: Revert the tty locking series, it needs more work
Linus Torvalds [Sat, 2 Jun 2012 22:21:43 +0000 (15:21 -0700)]
tty: Revert the tty locking series, it needs more work

This reverts the tty layer change to use per-tty locking, because it's
not correct yet, and fixing it will require some more deep surgery.

The main revert is d29f3ef39be4 ("tty_lock: Localise the lock"), but
there are several smaller commits that built upon it, they also get
reverted here. The list of reverted commits is:

  fde86d310886 - tty: add lockdep annotations
  8f6576ad476b - tty: fix ldisc lock inversion trace
  d3ca8b64b97e - pty: Fix lock inversion
  b1d679afd766 - tty: drop the pty lock during hangup
  abcefe5fc357 - tty/amiserial: Add missing argument for tty_unlock()
  fd11b42e3598 - cris: fix missing tty arg in wait_event_interruptible_tty call
  d29f3ef39be4 - tty_lock: Localise the lock

The revert had a trivial conflict in the 68360serial.c staging driver
that got removed in the meantime.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agofec_mpc52xx: fix timestamp filtering
Stephan Gatzka [Sat, 2 Jun 2012 03:04:06 +0000 (03:04 +0000)]
fec_mpc52xx: fix timestamp filtering

skb_defer_rx_timestamp was called with a freshly allocated skb but must
be called with rskb instead.

Signed-off-by: Stephan Gatzka <stephan@gatzka.org>
Cc: stable <stable@vger.kernel.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agomcs7830: Implement link state detection
Ondrej Zary [Fri, 1 Jun 2012 10:29:08 +0000 (10:29 +0000)]
mcs7830: Implement link state detection

Add .status callback that detects link state changes.
Tested with MCS7832CV-AA chip (9710:7830, identified as rev.C by the driver).
Fixes https://bugzilla.kernel.org/show_bug.cgi?id=28532

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoMerge 'for-linus' branches from git://git.kernel.org/pub/scm/linux/kernel/git/viro...
Linus Torvalds [Sat, 2 Jun 2012 16:03:54 +0000 (09:03 -0700)]
Merge 'for-linus' branches from git://git./linux/kernel/git/viro/{vfs,signal}

Pull vfs fix and a fix from the signal changes for frv from Al Viro.

The __kernel_nlink_t for powerpc got scrogged because 64-bit powerpc
actually depended on the default "unsigned long", while 32-bit powerpc
had an explicit override to "unsigned short".  Al didn't notice, and
made both of them be the unsigned short.

The frv signal fix is fallout from simplifying the do_notify_resume()
code, and leaving an extra parenthesis.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  powerpc: Fix size of st_nlink on 64bit

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  frv: Remove bogus closing parenthesis

12 years agopowerpc: Fix size of st_nlink on 64bit
Anton Blanchard [Sat, 2 Jun 2012 11:34:52 +0000 (21:34 +1000)]
powerpc: Fix size of st_nlink on 64bit

commit e57f93cc53b7 (powerpc: get rid of nlink_t uses, switch to
explicitly-sized type) changed the size of st_nlink on ppc64 from
a long to a short, resulting in boot failures.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agofrv: Remove bogus closing parenthesis
Geert Uytterhoeven [Sat, 2 Jun 2012 11:08:39 +0000 (13:08 +0200)]
frv: Remove bogus closing parenthesis

Introduced by commit 6fd84c0831ec78d98736b76dc5e9b849f1dbfc9e
("TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is set")

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
12 years agoe1000e: fix Rapid Start Technology support for i217
Bruce Allan [Thu, 10 May 2012 02:51:17 +0000 (02:51 +0000)]
e1000e: fix Rapid Start Technology support for i217

The definition of I217_PROXY_CTRL must use the BM_PHY_REG() macro instead
of the PHY_REG() macro for PHY page 800 register 70 since it is for a PHY
register greater than the maximum allowed by the latter macro, and fix a
typo setting the I217_MEMPWR register in e1000_suspend_workarounds_ich8lan.

Also for clarity, rename a few defines as bit definitions instead of masks.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoe1000: look into the page instead of skb->data for e1000_tbi_adjust_stats()
Sebastian Andrzej Siewior [Tue, 15 May 2012 09:18:55 +0000 (09:18 +0000)]
e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats()

This is another fixup where the data is not transfered into buffer
addressed by skb->data but into a page.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
12 years agoMerge branch 'akpm' (Fixups for Andrew's patchbomb)
Linus Torvalds [Sat, 2 Jun 2012 02:56:23 +0000 (19:56 -0700)]
Merge branch 'akpm' (Fixups for Andrew's patchbomb)

Merge fixups for the mac NLS tables from Andrew.

* emailed from Andrew Morton, and one cleanup by me:
  nls: fix (and rename) mac NLS table files and config options
  fs/nls/Makefile: remove bogus CONFIG_ assignments

12 years agonls: fix (and rename) mac NLS table files and config options
Linus Torvalds [Sat, 2 Jun 2012 02:51:22 +0000 (19:51 -0700)]
nls: fix (and rename) mac NLS table files and config options

The config options in the Kconfig file (with _CODEPAGE_ in the name)
didn't match the config option name in the Makefile (no _CODEPAGE_).

And both of them were of the hard-to-read MACXYZZY variety, which made
them hard to parse for normal humans: MACROMAN easily reads as "macro
man", not as "Mac Roman".

So rename the options to be consistent, and be NLS_MAC_xyzzy.  Rename
the files to be mac-xyzzy.c too, and drop the "nls" part entirely (it's
already in the directory name).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agofs/nls/Makefile: remove bogus CONFIG_ assignments
Andrew Morton [Fri, 1 Jun 2012 21:57:41 +0000 (14:57 -0700)]
fs/nls/Makefile: remove bogus CONFIG_ assignments

These were debug things which snuck through.

Reported-by: Yinghai Lu <yinghai@kernel.org>
Cc: Vladimir Serbinenko <phcoder@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6
Linus Torvalds [Fri, 1 Jun 2012 23:57:51 +0000 (16:57 -0700)]
Merge tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6

Pull fbdev updates from Florian Tobias Schandinat:
 - driver for AUO-K1900 and AUO-K1901 epaper controller
 - large updates for OMAP (e.g. decouple HDMI audio and video)
 - some updates for Exynos and SH Mobile
 - various other small fixes and cleanups

* tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6: (130 commits)
  video: bfin_adv7393fb: Fix cleanup code
  video: exynos_dp: reduce delay time when configuring video setting
  video: exynos_dp: move sw reset prioir to enabling sw defined function
  video: exynos_dp: use devm_ functions
  fb: handle NULL pointers in framebuffer release
  OMAPDSS: HDMI: OMAP4: Update IRQ flags for the HPD IRQ request
  OMAPDSS: Apply VENC timings even if panel is disabled
  OMAPDSS: VENC/DISPC: Delay dividing Y resolution for managers connected to VENC
  OMAPDSS: DISPC: Support rotation through TILER
  OMAPDSS: VRFB: remove compiler warnings when CONFIG_BUG=n
  OMAPFB: remove compiler warnings when CONFIG_BUG=n
  OMAPDSS: remove compiler warnings when CONFIG_BUG=n
  OMAPDSS: DISPC: fix usage of dispc_ovl_set_accu_uv
  OMAPDSS: use DSI_FIFO_BUG workaround only for manual update displays
  OMAPDSS: DSI: Support command mode interleaving during video mode blanking periods
  OMAPDSS: DISPC: Update Accumulator configuration for chroma plane
  drivers/video: fsl-diu-fb: don't initialize the THRESHOLDS registers
  video: exynos mipi dsi: support reverse panel type
  video: exynos mipi dsi: Properly interpret the interrupt source flags
  video: exynos mipi dsi: Avoid races in probe()
  ...

12 years agoMerge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd
Linus Torvalds [Fri, 1 Jun 2012 23:55:42 +0000 (16:55 -0700)]
Merge tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd

Pull mtd update from David Woodhouse:
 - More robust parsing especially of xattr data in JFFS2
 - Updates to mxc_nand and gpmi drivers to support new boards and device tree
 - Improve consistency of information about ECC strength in NAND devices
 - Clean up partition handling of plat_nand
 - Support NAND drivers without dedicated access to OOB area
 - BCH hardware ECC support for OMAP
 - Other fixes and cleanups, and a few new device IDs

Fixed trivial conflict in drivers/mtd/nand/gpmi-nand/gpmi-nand.c due to
added include files next to each other.

* tag 'for-linus-3.5-20120601' of git://git.infradead.org/linux-mtd: (75 commits)
  mtd: mxc_nand: move ecc strengh setup before nand_scan_tail
  mtd: block2mtd: fix recursive call of mtd_writev
  mtd: gpmi-nand: define ecc.strength
  mtd: of_parts: fix breakage in Kconfig
  mtd: nand: fix scan_read_raw_oob
  mtd: docg3 fix in-middle of blocks reads
  mtd: cfi_cmdset_0002: Slight cleanup of fixup messages
  mtd: add fixup for S29NS512P NOR flash.
  jffs2: allow to complete xattr integrity check on first GC scan
  jffs2: allow to discriminate between recoverable and non-recoverable errors
  mtd: nand: omap: add support for hardware BCH ecc
  ARM: OMAP3: gpmc: add BCH ecc api and modes
  mtd: nand: check the return code of 'read_oob/read_oob_raw'
  mtd: nand: remove 'sndcmd' parameter of 'read_oob/read_oob_raw'
  mtd: m25p80: Add support for Winbond W25Q80BW
  jffs2: get rid of jffs2_sync_super
  jffs2: remove unnecessary GC pass on sync
  jffs2: remove unnecessary GC pass on umount
  jffs2: remove lock_super
  mtd: gpmi: add gpmi support for mx6q
  ...

12 years agoMerge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86
Linus Torvalds [Fri, 1 Jun 2012 23:51:37 +0000 (16:51 -0700)]
Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86

Pull x86 platform driver updates from Matthew Garrett:
 "Some significant improvements for the Sony driver on newer machines,
  but other than that mostly just minor fixes and a patch to remove the
  broken rfkill code from the Dell driver."

* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (35 commits)
  apple-gmux: Fix up the suspend/resume patch
  dell-laptop: Remove rfkill code
  toshiba_acpi: Fix mis-merge
  dell-laptop: Add touchpad led support for Dell V3450
  acer-wmi: add 3 laptops to video backlight vendor mode quirk table
  sony-laptop: add touchpad enable/disable function
  sony-laptop: add missing Fn key combos for 0x100 handlers
  sony-laptop: add support for more WWAN modems
  sony-laptop: new keyboard backlight handle
  sony-laptop: add high speed battery charging function
  sony-laptop: support automatic resume on lid open
  sony-laptop: adjust error handling in finding SNC handles
  sony-laptop: add thermal profiles support
  sony-laptop: support battery care functions
  sony-laptop: additional debug statements
  sony-laptop: improve SNC initialization and acpi notify callback code
  sony-laptop: use kstrtoul to parse sysfs values
  sony-laptop: generalise ACPI calls into SNC functions
  sony-laptop: fix return path when no ACPI buffer is allocated
  sony-laptop: use soft rfkill status stored in hw
  ...