tg3: Remove 5750 PCI code

The 5750 ASIC rev was never released as a PCI device.  It only exists as
a PCIe device.  This patch removes the code that supports the former
configuration.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tg3: Move tg3_init_link_config to tg3_phy_probe

This patch moves the function that initializes the link configuration
closer to the place where the rest of the phy code is initialized.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tg3: Refine VAux decision process

In the near future, the VAux switching decision process is going to get
more complicated.  This patch refines and consolidates the existing
algorithm in anticipation of the new scheme.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tg3: cleanup pci device table vars

Commit 895950c2a6565d9eefda4a38b00fa28537e39fcb, entitled
"tg3: Use DEFINE_PCI_DEVICE_TABLE" moved two pci device tables into the
global address space, but didn't declare them static and didn't prefix
them with "tg3_".  This patch fixes those problems.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tg3: Add code to verify RODATA checksum of VPD

This patch adds code to verify the checksum stored in the "RV" info
keyword of the RODATA VPD section.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tg3: Fix NVRAM selftest

The tg3 NVRAM selftest actually fails when validating the checksum of
the legacy NVRAM format.  However, the test still reported success
because the last update of the return code was a success from the NVRAM
reads.  This patch fixes the code so that the error return code defaults
to a failure status.  Then the patch fixes the reason why the checsum
validation failed.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tg3: Add missed 5719 workaround change

Commit 2866d956fe0ad8fc8d8a7c54104ccc879b49406d, entitled
"tg3: Expand 5719 workaround" extended a 5719 A0 workaround to all
revisions of the chip.  There was a change that should have been a
part of that patch that was missed.  This patch adds the missing
piece.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: mark tcp_congestion_ops read_mostly

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Optimize flow initialization in fib_validate_source().

Like in commit 44713b67db10c774f14280c129b0d5fd13c70cf2
("ipv4: Optimize flow initialization in output route lookup."
we can optimize the on-stack flow setup to only initialize
the members which are actually used.

Otherwise we bzero the entire structure, then initialize
explicitly the first half of it.

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Optimize flow initialization in input route lookup.

Like in commit 44713b67db10c774f14280c129b0d5fd13c70cf2
("ipv4: Optimize flow initialization in output route lookup."
we can optimize the on-stack flow setup to only initialize
the members which are actually used.

Otherwise we bzero the entire structure, then initialize
explicitly the first half of it.

Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: ioctl type SIOCOUTQNSD returns amount of data not sent

In contrast to SIOCOUTQ which returns the amount of data sent
but not yet acknowledged plus data not yet sent this patch only
returns the data not sent.

For various methods of live streaming bitrate control it may
be helpful to know how much data are in the tcp outqueue are
not sent yet.

Signed-off-by: Mario Schuknecht <m.schuknecht@dresearch.de>
Signed-off-by: Steffen Sledz <sledz@dresearch.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Lookup multicast routes by rtable using helper.

Create a common helper for this operation, since we do
it identically in three spots.

Suggested by Eric Dumazet.

Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: move procfs code into bond_procfs.c

V2: Move #ifdef CONFIG_PROC_FS into bonding.h, as suggested by David.

bond_main.c is bloating, separate the procfs code out,
move them to bond_procfs.c

Signed-off-by: WANG Cong <amwang@redhat.com>
Reviewed-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Phonet: kill the ST-Ericsson pipe controller Kconfig

This is now a run-time choice so that a single kernel can support both
old and new generation ISI modems. Support for manually enabling the
pipe flow is removed as it did not work properly, does not fit well
with the socket API, and I am not aware of any use at the moment.

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Phonet: support active connection without pipe controller on modem

This provides support for newer ISI modems with no need for the
earlier experimental compile-time alternative choice. With this,
we can now use the same kernel and userspace with both types of
modems.

This also avoids confusing two different and incompatible state
machines, actively connected vs accepted sockets, and adds
connection response error handling (processing "SYN/RST" of sorts).

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Phonet: provide pipe socket option to retrieve the pipe identifier

User-space sometimes needs this information. In particular, the GPRS
context or the AT commands pipe setups may use the pipe handle as a
reference.

This removes the settable pipe handle with CONFIG_PHONET_PIPECTRLR.
It did not handle error cases correctly. Furthermore, the kernel
*could* implement a smart scheme for allocating handles (if ever
needed), but userspace really cannot.

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Phonet: allocate sock from accept syscall rather than soft IRQ

This moves most of the accept logic to process context like other
socket stacks do. Then we can use a few more common socket helpers
and simplify a bit.

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Phonet: factor common code to send control messages

With the addition of the pipe controller, there is now quite a bit
of repetitive code for small signaling messages. Lets factor it.

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Phonet: correct pipe backlog callback return values

In some cases, the Phonet pipe backlog callbacks returned negative
errno instead of NET_RX_* values.

In other cases, NET_RX_DROP was returned for invalid packets, even
though it seems only intended for buffering problems (not for
deliberately discarded packets).

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Phonet: return an error when packet TX fails

Phonet assumes that packets are never dropped. We try our best to
avoid this situation. But lets return ENOBUFS if queueing to the
network device fails so that the caller knows things went wrong.

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Phonet: fix NULL dereference on TX path with implicit source

The previous Phonet patch series introduced per-socket implicit
destination (i.e. connect()). In that case, the destination
socket address is NULL in the transmit function.
However commit a8059512b120362b15424f152b2548fe8b11bd0c
("Phonet: implement per-socket destination/peer address")
is incomplete and would trigger a NULL dereference.
(Fortunately, the code is not in released kernel, and in fact
 currently not reachable.)

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inetpeer: Don't disable BH for initial fast RCU lookup.

If modifications on other cpus are ok, then modifications to
the tree during lookup done by the local cpu are ok too.

Signed-off-by: David S. Miller <davem@davemloft.net>

ixgbe: fix compile failure in ixgbe_init_mbx_params_pf

This commit:

    commit d7c8a29fc8bd20ba45ec2f52577ed04a988a9500
    Author: Emil Tantilov <emil.s.tantilov@intel.com>
    Date:   Thu Mar 3 09:25:02 2011 +0000

        ixgbe: improve logic in ixgbe_init_mbx_params_pf

incorrectly added a line that accessed mbx->udelay.  I'm sure the intent
was mbx->usec_delay.  This patch fixes the compilation error.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

dsa/mv88e6060: support nonzero mii base address

The mv88e6060 uses either the lower 16 or upper 16 mii addresses,
depending on the value of the EE_CLK/ADDR4 pin. Support both
configurations by using the sw_addr setting as base address.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-davem' of git://git./linux/kernel/git/bwh/sfc-next-2.6

Merge branch 'master' of /linux/kernel/git/jkirsher/net-next-2.6

ipv4: Fix scope value used in route src-address caching.

We have to use cfg->fc_scope not the final nh_scope value.

Reported-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Cache source address in nexthop entries.

When doing output route lookups, we have to select the source address
if the user has not specified an explicit one.

First, if the route has an explicit preferred source address
specified, then we use that.

Otherwise we search the route's outgoing interface for a suitable
address.

This search can be precomputed and cached at route insertion time.

The only missing part is that we have to refresh this precomputed
value any time addresses are added or removed from the interface, and
this is accomplished by fib_update_nh_saddrs().

Signed-off-by: David S. Miller <davem@davemloft.net>

ixgbe: fix setting and reporting of advertised speeds

Add the ability to set 100/F on x540.
Fix reporting of advertised modes by adding check for phy.autoneg_advertised

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: fix spelling errors

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: improve logic in ixgbe_init_mbx_params_pf

Use if/then instead of an all-inclusive case statement.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: add function description

Add description for ixgbe_init_eeprom_params_X540 and whitespace fix.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: Enable flow control pause parameter auto-negotiation support

This patch enables flow control pause parameters auto-negotiation support
to 82599 based 10G Base-T, backplane devices and multi-speed fiber optics
modules at 1G speed

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: Add x540 statistic counter definitions

Add defines to accumulate and display x540 PHY statistic counters on
transmit/receive.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: clear correct counters for flow control on 82599

The 82599 was not correctly having some of it's counters cleared for flow
control.  This change corrects that.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: cleanup PHY init

This change cleans up several situations in which we were either stepping
over possible errors, or calling initialization routines multiple times.
Also includes whitespace fixes where applicable.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Stephen Ko <stephen.s.ko@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: add support to FCoE DDP in target mode

Add support to the ndo_fcoe_ddp_target() to allow the Intel 82599 device to
also provide DDP offload capability when the upper FCoE protocol stack is
operating as a target.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

vlan: add support to ndo_fcoe_ddp_target()

Add the new target ddp offload support ndo_fcoe_ddp_target().

Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

net: add ndo_fcoe_ddp_target() to support FCoE DDP in target mode

The Fiber Channel over Ethernet (FCoE) Direct Data Placement (DDP) can also be
used for FCoE target, where the DDP used for read I/O on an initiator can be
used on an FCoE target to speed up the write I/O to the target from the initiator.
The added ndo_fcoe_ddp_target() works in the similar way as the existing
ndo_fcoe_ddp_setup() to allow the underlying hardware set up the DDP context
accordingly when it gets called from the FCoE target implementation on top
the existing Open-FCoE fcoe/libfc protocol stack so without losing the ability
to provide DDP for read I/O as an initiator, it can also provide DDP offload
to the write I/O coming from the initiator as a target.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe: fix missing function pointer conversion

In the previous commit:
  commit 5e655105e3e19d746f9e95c514b014c11c3d1b6a
  Author: Don Skidmore <donald.c.skidmore@intel.com>
  Date:   Fri Feb 25 01:58:04 2011 +0000

  ixgbe: add function pointer for semaphore function

there was one release of the semaphore function call which
did not get converted to a function pointer.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

igb: Add stats output for OS2BMC feature on i350 devices

This patch adds statistics output for OS2BMC feature which is configured
by eeprom on capable devices.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

e1000e: fix build issue due to undefined reference to crc32_le

kernel build fails with:

drivers/built-in.o: In function `e1000_lv_jumbo_workaround_ich8lan':
(.text+0x3e7a8): undefined reference to `crc32_le'

when CONFIG_CRC32 is not set or does not match the CONFIG_E1000E
selection.

Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

af_unix: remove unused struct sockaddr_un cruft

Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: several declared/set but unused fixes

Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_packet: struct socket declared/assigned but unused

Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

mcast: net_device dev not used

ip6_mc_source(), ip6_mc_msfilter() as well as ip6_mc_msfget() declare
and assign dev but do not use the variable afterwards.

Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

s2io: fix uninitialized compile warning

drivers/net/s2io.c:7559: warning: ‘tcp_len’ may be used uninitialized in this function

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: COW before overwriting the destination MAC address

When there is a ptype handler holding a clone of this skb, whose
destination MAC addresse is overwritten, the owner of this handler may
get a corrupted packet.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bonding: remove the unused dummy functions when net poll controller isn't enabled

These two functions are only used when net poll controller is enabled.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'davem-next.r8169' of git://git./linux/kernel/git/romieu/netdev-2.6

net: allow handlers to be processed for orig_dev

This was there before, I forgot about this. Allows deliveries to
ptype_base handlers registered for orig_dev. I presume this is still
desired.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: Add multicast filter capability for Lancer

Lancer requires multicast capability flag set during IFACE_CREATE
for adding multicast filters.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: Disarm CQ and EQ to disable interrupt in Lancer

For Lancer disable interrupts in close by disarming CQs and EQs.
Change the order of calls in be_close to achieve the correct result.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: Remove TX Queue stop in close

Remove TX Queue stop in close

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: Change f/w command versions for Lancer

Change f/w command versions for Lancer

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: Add error recovery during load for Lancer

Add error recovery during load for Lancer

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: Checksum field valid only for TCP/UDP

L4 checksum field is valid only for TCP/UDP packets in Lancer

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

be2net: Remove ERR compl workaround for Lancer

Workaround added for Lancer in handling RX ERR completion received
when no RX buffers are posted is not needed.

Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Inline fib_semantic_match into check_leaf

This elimiates a lot of pure overhead due to parameter
passing.

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Validate route entry type at insert instead of every lookup.

fib_semantic_match() requires that if the type doesn't signal an
automatic error, it must be of type RTN_UNICAST, RTN_LOCAL,
RTN_BROADCAST, RTN_ANYCAST, or RTN_MULTICAST.

Checking this every route lookup is pointless work.

Instead validate it during route insertion, via fib_create_info().

Also, there was nothing making sure the type value was less than
RTN_MAX, so add that missing check while we're here.

Signed-off-by: David S. Miller <davem@davemloft.net>

netdevice: Convert printk to pr_info in netif_tx_stop_queue

This allows any caller to be prefaced by any specific
pr_fmt to better identify which device driver is using
this function inappropriately.

Add terminating newline.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'batman-adv/next' of git://git.open-mesh.org/ecsv/linux-merge

batman-adv: Disallow regular interface as mesh device

When trying to associate a net_device with another net_device which
already exists, batman-adv assumes that this interface is a fully
initialized batman mesh interface without checking it. The behaviour
when accessing data behind netdev_priv of a random net_device is
undefined and potentially dangerous.

Reported-by: Linus Lüssing <linus.luessing@ascom.ch>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: Remove unused hdr_size variable in route_unicast_packet()

Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: rename batman_if struct to hard_iface

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: rename global if_list to hardif_list

Batman-adv works with "hard interfaces" as well as "soft interfaces".
The new name should better make clear which kind of interfaces this
list stores.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: remove orig_hash spinlock

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: increase refcount in create_neighbor to be consistent

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: Correct rcu refcounting for orig_node

It might be possible that 2 threads access the same data in the same
rcu grace period. The first thread calls call_rcu() to decrement the
refcount and free the data while the second thread increases the
refcount to use the data. To avoid this race condition all refcount
operations have to be atomic.

Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: remove extra layer between hash and hash element - hash bucket

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: separate ethernet comparing calls from hash functions

Note: The function compare_ether_addr() provided by the Linux kernel
requires aligned memory.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: Fix possible buffer overflow in softif neigh list output

When printing the soft interface table the number of entries in the
softif neigh list are first being counted and a fitting buffer
allocated. After that the softif neigh list gets locked again and
the buffer printed - which has the following two issues:

For one thing, the softif neigh list might have grown when reacquiring
the rcu lock, which results in writing outside of the allocated buffer.
Furthermore 31 Bytes are not enough for printing an entry with a vid
of more than 2 digits.

The manual buffering is unnecessary, we can safely print to the seq
directly during the rcu_read_lock().

Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: Increase orig_node refcount before releasing rcu read lock

When unicast_send_skb() is increasing the orig_node's refcount another
thread might have been freeing this orig_node already. We need to
increase the refcount in the rcu read lock protected area to avoid that.

Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: Make bat_priv->curr_gw an rcu protected pointer

The rcu protected macros rcu_dereference() and rcu_assign_pointer()
for the bat_priv->curr_gw need to be used, as well as spin/rcu locking.

Otherwise we might end up using a curr_gw pointer pointing to already
freed memory.

Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: make broadcast seqno operations atomic

Batman-adv could receive several payload broadcasts at the same time
that would trigger access to the broadcast seqno sliding window to
determine whether this is a new broadcast or not. If these incoming
broadcasts are accessing the sliding window simultaneously it could
be left in an inconsistent state. Therefore it is necessary to make
sure this access is atomic.

Reported-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: protect bit operations to count OGMs with spinlock

Reported-by: Linus Lüssing <linus.luessing@saxnet.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: Correct rcu refcounting for batman_if

It might be possible that 2 threads access the same data in the same
rcu grace period. The first thread calls call_rcu() to decrement the
refcount and free the data while the second thread increases the
refcount to use the data. To avoid this race condition all refcount
operations have to be atomic.

Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: Correct rcu refcounting for softif_neigh

It might be possible that 2 threads access the same data in the same
rcu grace period. The first thread calls call_rcu() to decrement the
refcount and free the data while the second thread increases the
refcount to use the data. To avoid this race condition all refcount
operations have to be atomic.

Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: Correct rcu refcounting for gw_node

It might be possible that 2 threads access the same data in the same
rcu grace period. The first thread calls call_rcu() to decrement the
refcount and free the data while the second thread increases the
refcount to use the data. To avoid this race condition all refcount
operations have to be atomic.

Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: Correct rcu refcounting for neigh_node

It might be possible that 2 threads access the same data in the same
rcu grace period. The first thread calls call_rcu() to decrement the
refcount and free the data while the second thread increases the
refcount to use the data. To avoid this race condition all refcount
operations have to be atomic.

Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: protect bonding with rcu locks

bonding / alternating candidates need to be secured by rcu locks
as well. This patch therefore converts the bonding list
from a plain pointer list to a rcu securable lists and references
the bonding candidates.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: protect ogm counter arrays with spinlock

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: protect originator nodes with reference counters

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: protect each hash row with rcu locks

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: protect neigh_nodes used outside of rcu_locks with refcounting

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: free neighbors when an interface is deactivated

hardif_disable_interface() calls purge_orig_ref() to immediately free
all neighbors associated with the interface that is going down.
purge_orig_neighbors() checked if the interface status is IF_INACTIVE
which is set to IF_NOT_IN_USE shortly before calling purge_orig_ref().

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: protect neighbor list with rcu locks

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: convert neighbor list to hlist

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

batman-adv: protect neighbor nodes with reference counters

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

r8169: convert to new VLAN model.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Reviewed-by: Jesse Gross <jesse@nicira.com>

r8169: support control of advertising.

This allows "ethtool advertise" to control the speed and duplex
features the device offers the switch.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>

r8169: support the new chips for RTL8105E.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>

ipv4: Remove flowi from struct rtable.

The only necessary parts are the src/dst addresses, the
interface indexes, the TOS, and the mark.

The rest is unnecessary bloat, which amounts to nearly
50 bytes on 64-bit.

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Set rt->rt_iif more sanely on output routes.

rt->rt_iif is only ever inspected on input routes, for example DCCP
uses this to populate a route lookup flow key when generating replies
to another packet.

Therefore, setting it to anything other than zero on output routes
makes no sense.

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Use passed-in protocol in ip_route_newports().

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Get peer more cheaply in rt_init_metrics().

We know this is a new route object, so doing atomics and
stuff makes no sense at all.

Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: Optimize flow initialization in output route lookup.

We burn a lot of useless cycles, cpu store buffer traffic, and
memory operations memset()'ing the on-stack flow used to perform
output route lookups in __ip_route_output_key().

Only the first half of the flow object members even matter for
output route lookups in this context, specifically:

FIB rules matching cares about:

dst, src, tos, iif, oif, mark

FIB trie lookup cares about:

dst

FIB semantic match cares about:

tos, scope, oif

Therefore only initialize these specific members and elide the
memset entirely.

On Niagara2 this kills about ~300 cycles from the output route
lookup path.

Likely, we can take things further, since all callers of output
route lookups essentially throw away the on-stack flow they use.
So they don't care if we use it as a scratch-pad to compute the
final flow key.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>

inetpeer: seqlock optimization

David noticed :

------------------
Eric, I was profiling the non-routing-cache case and something that
stuck out is the case of calling inet_getpeer() with create==0.

If an entry is not found, we have to redo the lookup under a spinlock
to make certain that a concurrent writer rebalancing the tree does
not "hide" an existing entry from us.

This makes the case of a create==0 lookup for a not-present entry
really expensive.  It is on the order of 600 cpu cycles on my
Niagara2.

I added a hack to not do the relookup under the lock when create==0
and it now costs less than 300 cycles.

This is now a pretty common operation with the way we handle COW'd
metrics, so I think it's definitely worth optimizing.
-----------------

One solution is to use a seqlock instead of a spinlock to protect struct
inet_peer_base.

After a failed avl tree lookup, we can easily detect if a writer did
some changes during our lookup. Taking the lock and redo the lookup is
only necessary in this case.

Note: Add one private rcu_deref_locked() macro to place in one spot the
access to spinlock included in seqlock.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-davem' of ssh:///linux/kernel/git/linville/wireless-next-2.6

Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next-2.6 into for-davem