staging: lustre: obd: add newline for dumped config record

The function class_config_parse_rec() parses the llog record
and places it into a buffer to be returned. That buffer needs
to end with a newline which is currently missing.

Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2149
Reviewed-on: http://review.whamcloud.com/4254
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obd: remove newline from LCONSOLE string

Remove the newline from the LCONSOLE debug macro in the
function class_config_dump_handler().

Signed-off-by: Amir Shehata <amir.shehata@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2149
Reviewed-on: http://review.whamcloud.com/4254
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ptlrpc: quiet warning for 2.1/2.5 connections

The Lustre 2.5.4 client will print a warning about connections with
2.1.3 servers, yet they are still supposed to be interoperable.
Increase the window of warning to be up to Lustre 2.5.50, since we
do not intend to allow interoperability between 2.1 and 2.6 systems.
This was from the time when major releases like Lustre 1.4 and 1.8
were many years apart would have no chance for interoperation.

Only print this message once per client, to avoid flooding the console
for connections to many servers or frequent network reconnections.
Server versions should all be nearly the same in any case.

Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2528
Reviewed-on: http://review.whamcloud.com/7916
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: osc: Use SOFT_SYNC to urge server commit

This change adds a BRW page flag, OBD_BRW_SOFT_SYNC. This flag is
intended to urge a server to commit a client's unstable pages to
stable storage. A client will add this flag to any BRW requests while
it is in a state where it has "many" unstable pages pinned in its cache.

The server, upon receiving a page with this flag set, *should* begin
an async commit. The idea being that, with the proactive async commit,
the client's pinned unstable pages will transition into a stable state
faster than they would have otherwise. Although, the server side portion
of this agreement is still unimplemented, so the OBD_BRW_SOFT_SYNC flag
will currently fall on deaf ears.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2139
Reviewed-on: http://review.whamcloud.com/4375
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: osc: Track number of "unstable" pages per osc

This change adds simple accounting hooks for "unstable" pages on a per
OSC basis. Now, in addition to the per filesystem tracking, each OSC
will maintain a running total of its unstable pages. These counters are
exported through the proc interface, and can be read using the lctl
command.

For example:

# Read number of unstable pages contained by each OSC
lctl get_param osc.*.unstable_stats

The motivation for this change is in anticipation of implementing a
"soft sync" functionality, urging servers to commit these unstable
pages to stable storage. The per OSC accounting allows a client to
limit the soft sync request to only the OSCs which have outstanding
unstable pages.

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2139
Reviewed-on: http://review.whamcloud.com/4374
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: osc: Track and limit "unstable" pages

This change adds a global counter to track the number of "unstable"
pages held by a given client, along with per file system counters. An
"unstable" page is defined as a page which has been sent to the server
as part of a bulk request, but is uncommitted to stable storage.

In addition to simply tracking the unstable pages, they now also count
towards the maximum number of "pinned" pages on the system at any given
time. Thus, a client will now be bound on the number of dirty and
unstable pages it can pin in memory. Previously only dirty pages were
accounted for in this limit.

In addition to tracking the number of unstable pages in Lustre, the
NR_UNSTABLE_NFS memory zone is also incremented and decremented for
easy monitoring using the "NFS_Unstable:" field in /proc/meminfo.
This field is also used internally by the kernel to limit the total
amount of unstable pages on the system.

The motivation for this change is twofold. First, the client must not
allow itself to disconnect from an OST while still holding unstable
pages. Otherwise, these unstable pages can get lost due to an OST
failure, and replay is not possible due to the disconnect via unmount.

Secondly, the client needs a mechanism to prevent it from allocating too
much of its available RAM to unreclaimable pages pinned by the ptlrpc
layer. If this case occurs, out of memory events can trigger as a side
effect, which we need to avoid.

The current number of unstable pages accounted for on a per file system
granularity is exported by the unstable_stats proc file, contained under
each file system's llite namespace. An example of retrieving this
information is below:

$ lctl get_param llite.*.unstable_stats

Signed-off-by: Prakash Surya <surya1@llnl.gov>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2139
Reviewed-on: http://review.whamcloud.com/6284
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: mgc: fix 'error handling' issues

Fix 'error handling' issues found by Coverity version 6.6.1:
Unchecked return value (CHECKED_RETURN)
Calling function without checking return value.
Argument cannot be negative (NEGATIVE_RETURNS)
Negative value used as argument to a function expecting a
positive value.

Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4055
Reviewed-on: http://review.whamcloud.com/7842
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: James Nunez <james.a.nunez@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: clio: add debug message in osc_completion()

Replace LASSERT with LASSERTF in osc_completion, thus we can get
more info when the LASSERT is triggered.

Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3843
Reviewed-on: http://review.whamcloud.com/7494
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: Replace printing of i_ino with ll_inode2fid()

The printing of i_ino/i_generation in llite messages is not nearly so
useful as printing the full inode FID, since i_ino is a "compressed"
version of the FID and there may be duplicate values for i_ino in some
cases (especially if running on a 32-bit client).

All instances of printing i_ino/i_generation are replaced with
the FID using ll_inode2fid(). All instances, except for one, of
printing just i_ino was replaced by printing the FID. In all
CERROR lines touched by the i_ino replacements, the device name
or fsname was added at the beginning of the message if it did not
already exist.

Signed-off-by: James Nunez <james.a.nunez@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3491
Reviewed-on: http://review.whamcloud.com/6848
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: update comments about ldlm l_flags

Add and update documentation about some of the ldlm l_flags.

Signed-off-by: Bruce Korb <bruce.korb@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2906
Reviewed-by: Keith Mannthey <Keith.Mannthey@intel.com>
Reviewed-on: http://review.whamcloud.com/7963
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: remove code wireshark handling

Wireshark output moved to userland file "lustre_dlm_flags_wshark.c"
and only bits that can actually appear "on the wire" are emitted.
The user land "packet-lustre.c" code that references these bits
now gets emitted into that file. e.g. the "local_only" bit is
never put on the wire, so references to it in wireshark are gone.

Signed-off-by: Bruce Korb <bruce.korb@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2906
Reviewed-by: Keith Mannthey <Keith.Mannthey@intel.com>
Reviewed-on: http://review.whamcloud.com/7963
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: clean up l_flags

Remove the now obsolete LDLM_AST_FLAGS and LDLM_INHERIT_FLAGS defines.
Remove the obsolete LDLM_FL_HIDE_LOCK_MASK define.
Rename "local_only" mask to "off_wire" since it is confusingly similar
to a flag that (I think) means, "do not copy this lock over the wire."

Signed-off-by: Bruce Korb <bruce.korb@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2906
Reviewed-by: Keith Mannthey <Keith.Mannthey@intel.com>
Reviewed-on: http://review.whamcloud.com/7963
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: use accessor macros for l_flags

Convert most of the ldlm lock's l_flags references from direct
bit twiddling to using bit specific macros.  A few multi-bit
operations are left as an exercise for the reader.

The changes are mostly in ldlm, but also in llite, osc and quota.
Also add a multi-bit (mask) test.

Signed-off-by: Bruce Korb <bruce.korb@gmail.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2906
Reviewed-by: Keith Mannthey <Keith.Mannthey@intel.com>
Reviewed-on: http://review.whamcloud.com/7963
Reviewed-by: Doug Oucharek <doug.s.oucharek@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lmv: kernel crash due to misconfigured MDT

There are few places with access to lmv->tgts[] without check for NULL.
Usually it may happens when MDT configured starting from index 1
instead of 0. For example:
mkfs.lustre --reformat --mgs --mdt --index=1 /dev/sdd1

Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4098
Reviewed-on: http://review.whamcloud.com/7941
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Alex Zhuravlev <alexey.zhuravlev@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obdclass: add LCT_SERVER_SESSION for server session

Add LCT_SERVER_SESSION for server session, and separate the
server session flag from LCT_SESSION, so to avoid allocating
session info for client stack for each server request, if
client and server are on the same node.

Signed-off-by: Wang Di <di.wang@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3806
Reviewed-on: http://review.whamcloud.com/7412
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Mike Pershin <mike.pershin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: NFS reexport issue

Suppress erroneous/confusing messages when NFS
is out of sync and requests old data.

Signed-off-by: Dmitry Eremin <dmitry.eremin@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4050
Reviewed-on: http://review.whamcloud.com/7850
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: reset writeback index in ll_writepages

Otherwise after one round the writeback index will become beyond
the file size and ->writepages() turns into an empty operation.

Also, a safety guard is added to limit the wait time for grant to
10 minutes(take recovery into consideration) at maximum in the
osc_enter_cache() function. Otherwise, EDQUOT will be returned to
the applications to start sync write.

Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3416
Reviewed-on: http://review.whamcloud.com/6554
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Niu Yawei <yawei.niu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Make lustre_profile_list static

Variable lustre_profile_list is only used inside obd_config.c,
better make it static

Signed-off-by: Iban Rodriguez <iban.rodriguez@ono.com>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: hsm: don't use real suppgid

In the MDC HSM handlers that do not pack a real suppgid, use -1 rather
than 0 for the suppgid in mdt_body.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3866
Reviewed-on: http://review.whamcloud.com/7565
Reviewed-by: Aurelien Degremont <aurelien.degremont@cea.fr>
Reviewed-by: Faccini Bruno <bruno.faccini@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: hsm: permission checks for HSM ioctl operations

In the LL_IOC_HSM_CT_START case of ll_dir_ioctl() require
CAP_SYS_ADMIN, since the local handler for this ioctl may modify the
global KUC table.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3866
Reviewed-on: http://review.whamcloud.com/7565
Reviewed-by: Aurelien Degremont <aurelien.degremont@cea.fr>
Reviewed-by: Faccini Bruno <bruno.faccini@intel.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lov: Don't wait for active target with OBD_STATFS_NODELAY

Patch for LU-631 which was landed before the upstream merge broke
OBD_STATFS_NODELAY behaviour. It adds unnecessary delay while
running df command with inactive OSTs. We shouldn't try to recover
connection to OST in this case.

Signed-off-by: Andriy Skulysh <Andriy_Skulysh@xyratex.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4010
Reviewed-on: http://review.whamcloud.com/7762
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lov: return minimal FIEMAP for released files

Since st_blocks = NULL is returned for released files, FIEMAP
should at least return a minimal mapping to make users aware
that file contains data but it is not immediately available.
This will make coreutils and tools such tar happy and have
them presume file is sparse.

Also, add a new test_228 in sanity-hsm to verify it works
for "[cp,tar] --sparse" commands.

Also fix a LBUG ("lov_fiemap()) ASSERTION( fm_local ) failed")
likely to occur when no-object/ENOMEM conditions and also now
when released.

Signed-off-by: Bruno Faccini <bruno.faccini@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3864
Reviewed-on: http://review.whamcloud.com/7584
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Aurelien Degremont <aurelien.degremont@cea.fr>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lprocfs: implement log2 using bitops

This patch implements log2 using fls.

Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com>
Reviewed-by: Alexander Boyko <Alexander_Boyko@xyratex.com>
Reviewed-by: alexander_zarochentsev@xyratex.com
Reviewed-by: Vitaly Fertman <Vitaly_Fertman@xyratex.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3496
Xyratex-bug-id: MRP-999
Reviewed-on: http://review.whamcloud.com/6757
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: osc: osc_extent_wait() shouldn't be interruptible

Otherwise it will hit the assertion at cl_lock.c:

 cl_lock.c:1967:discard_cb())
  ASSERTION( (!(page->cp_type == CPT_CACHEABLE) ||
  (!PageWriteback(cl_page_vmpage(env, page)))) ) failed:

This is because in osc_lock_flush() we have to make sure the IO
is finished before discarding the pages.

Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2779
Reviewed-on: http://review.whamcloud.com/5419
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: Truncate to restore file

Truncate up is safe so it won't trigger restore.

Copy optimization for truncate down - only copy the part under
truncate length. If a file is truncated to zero usually it'll be
followed by write so I choose to restore the file and set correct
stripe information.

Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3817
Reviewed-on: http://review.whamcloud.com/7505
Reviewed-by: jacques-Charles Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Henri Doreau <henri.doreau@cea.fr>
Reviewed-by: Aurelien Degremont <aurelien.degremont@cea.fr>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ptlrpc: return a meaningful status from ptlrpcd_init()

This patch has the following:
1) Fix for the return value from ptlrpcd_init(). It will now return a
   correct status instead of returning zero always.
2) ptlrpcd_addref() should not increment ptlrpcd_users on error.
3) Added code in a mdc_setup() and mgc_setup() to test the return
   value of ptlrpcd_addref() and return on error.

Signed-off-by: Swapnil Pimpale <spimpale@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3808
Reviewed-on: http://review.whamcloud.com/7522
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obd: MDT mount fails on MDS w/o MGS on it

If we specify multiple --mgsnode for a MDT, when we start MDS upon
it while MGS is no the other node, the MGC import connection will
always select the local nid (which is one of the candidate mgsnode)
since it think its the closest connection.

This patch treats further --mgsnode nids as failover nids, so that
multiple import connections are added for the MGC import.

Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3829
Reviewed-on: http://review.whamcloud.com/7509
Reviewed-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-by: Lai Siyao <lai.siyao@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: error setting max_cache_mb at mount time

The root cause is that when max_cache_mb conf parameter is applied,
the client isn't connected to the OST yet so that sbi->ll_dt_exp is
NULL. However, it's not necessary to shrink the cache memory in this
case so success should be returned.

Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3676
Reviewed-on: http://review.whamcloud.com/7194
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: speedup in unlink/rmdir

Assume dchild argument is fully initialized in ->unlink and
->rmdir callbacks, so additional lookup for ELC is not needed.

Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com>
Reviewed-by: Alexander Boyko <Alexander_Boyko@xyratex.com>
Reviewed-by: Vitaly Fertman <Vitaly_Fertman@xyratex.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3473
Xyratex-bug-id: MRP-1027
Reviewed-on: http://review.whamcloud.com/6648
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: variable rename in namei.c

With the patch 6648 a fee variables were renamed. We do these
renames in broken out patch to the fix obvious.

Signed-off-by: Andrew Perepechko <andrew_perepechko@xyratex.com>
Reviewed-by: Alexander Boyko <Alexander_Boyko@xyratex.com>
Reviewed-by: Vitaly Fertman <Vitaly_Fertman@xyratex.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3473
Xyratex-bug-id: MRP-1027
Reviewed-on: http://review.whamcloud.com/6648
Reviewed-by: Fan Yong <fan.yong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: refine LU-2665 patch for POSIX compliance

Follow-on to patch introduced to fix LU-2665 ticket (Gerrit
Change at http://review.whamcloud.com/6415 with Change-Id:
I8faa331712abeadee46eabe111ee1c23a05840d5).
Original patch introduced regressions against POSIX test suite
(fcntl.18/fcntl.35 tests in LSB-VSX POSIX test suite at
http://www.opengroup.org/testing/linux-test/lsb-vsx.html),
so the idea is to only resend F_UNLCKs to have both LU-2665 bug
and POSIX test suite happy.

Signed-off-by: Bruno Faccini <bruno.faccini@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3701
Reviewed-on: http://review.whamcloud.com/7453
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: Fix a race during FLock handling

Protect against race where lock could have been just destroyed
due to overlap, in ldlm_process_flock_lock().
Easy reproducer is BULL's NFS Locktests in pthread mode.
(http://nfsv4.bullopensource.org/tools/tests/locktest.php)

Signed-off-by: Bruno Faccini <bruno.faccini@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-1126
Reviewed-on: http://review.whamcloud.com/7134
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: clio: incorrect assertions in 'enable-invariants'

Fixed several incorrect assumptions in 'enable-invariants'.

Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3521
Reviewed-on: http://review.whamcloud.com/6832
Reviewed-by: Bobi Jam <bobijam@gmail.com>
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: osc: fix race issues thanks to oap_lock

Fix 'data race condition' defects found by Coverity version 6.5.0:

Data race condition (MISSING_LOCK)

Accessing variable without holding lock. Elsewhere,
this variable is accessed with lock held.

This patch is dedicated to code fragments involving oap_lock.

Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2744
Reviewed-on: http://review.whamcloud.com/6572
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre/llite: suppress non active IO error message

Current CLIO does not support fadvise, suppress the error message.

Signed-off-by: Bobi Jam <bobijam.xu@intel.com>
Reviewed-on: http://review.whamcloud.com/9658
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4717
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/lustre: Fix blank line after/before {/} style

This patch fixes all checkpatch occurences of
CHECK: Blank lines aren't necessary after an open brace '{'
CHECK: Blank lines aren't necessary before a close brace '}'
in Lustre code.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: libcfs: Fix libcfs_ioctl() prototype.

Fix libcfs_ioctl() prototype according to its definition in
libcfs/module.c.

Signed-off-by: Aleksei Fedotov <lexa@cfotr.com>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: selftest: convert wire protocol to use struct

Change all the wire protocol typedefs to proper structures

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: selftest: convert lstcon_test_t to proper struct

Turn typedef lstcon_test_t to proper structure

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'iio-for-4.7b' of git://git./linux/kernel/git/jic23/iio into staging-testing

Jonathan writes:

2nd set of new device support, features and cleanup for IIO in the 4.7 cycle.

Bit of a bumper set for new drivers but plenty of other stuff here as well!

New device support
* ad5592R ADC/DAC
  - new driver supporting ad5592r and ad5593r combined ADC/DAC and gpio chips.
* Aosong am2315 relative humidity
  - new driver with triggered buffer support in follow up patch.
* bmi160 imu
  - new driver
* bmp280
  - bmp180 support - note there is support in the misc/bmp085 driver. Intent
    is to remove that driver long term.
* invensense mpu6050
  - cleanup leading to explicit support of mpu9150 with a good few cleanups
    along the way.
* Hope RF hp03 pressure and temperature sensor.
  - new driver
* maxim DS1803 potentiometer
  - new driver
* maxim max44000 light and proximity sensor
  - new driver built in a series of steps to support pretty much everything.
* ROHM BH1780 light sensor
  - new driver. There is an existing driver in misc that this is pretty much
    intended to replace.  The discussion on whether to support the non standard
    interface of that driver is some way is continuing.
* st-gyro
  - lsm9ds0-gyro.  The accel/magn side of this will take a while longer as
    extensions to the st library are needed for cases where two types of sensor
    share a single i2c address.
* ti-adc081c
  - support the adc101c and adc121c
* Vishay VEML6070 UV sensor
  - new driver.

New features
* core
  - devm_ APIs for channel_get and channel_get_all.  The first user of these
    is the generic ADC based thermal driver.  As it is going through the
    thermal tree these will be picked up as a patch to that next cycle as that
    is how the author preferred to do it.
  - mounting matrix support.  This new core support allows devices to provide
    to userspace (typically from the device tree) allowing compensation for how
    the sensor is mounted on the device.  First examples are on UAVs but it
    has a more mundane use on typical phone where the chip may be on the front
    or the back of the circuit board and soldered at any angle. Includes
    support for this ABI in ak8975 (which has an older interface, now
    deprecated) and mpu6050.
* tools
  - add a -a option to enable all available channels in generic_buffer sample.
    Makes it somewhat easier to use.
* adis library and drivers
  - support manual self test flag clearing.  This has technically been broken
    for a very long time - result is an offset on readings as the applied field
    is on all the time.
* ak8975
  - triggered buffer support
* bmc150
  - spi support (including splitting the driver into core and i2c parts)
* bmp280
  - oversampling support.
* dht11
  - improved logging - useful to debug timing issues on this quirky device.
* st-sensors
  - read each channel invidivually as not all support the optimization of
  reading in bulk.  This is technically a fix, but will need to be backported
  if desired.
  - support open drain and shared interrupts.
* ti-adc081c
  - triggered buffer support.

Cleanups
* inkern
  - white space fix.
* ad7606
  - use the iio_device_claim_direct_mode call rather than open coding equiv.
* ad799x
  - white space fix.
* ad9523
  - unsigned -> unsigned int
* apds9660
  - brace location tidying up.
  - silence an uninitialized variable warning.
* ak8975
  - else and brace on same line fix.
* at91_adc
  - white space fixes.
* bmc150
  - use regmap stored copy of the device pointer rather than having an
    additional copy.
* bmg160
  - use regmap stored copy of the device pointer rather than having an
    additional copy.
* hid-sensors
  - white space fixes.
* mcp3422
  - white space fix.
* mma7455
  - use regmap to retrieve the device struct rather than carrying another copy
    in the private data.
* ms_sensors
  - white space fix.
* mxs-lradc
  - move current bindings out of staging - some will be shortly deprecated but
    the reality is that we have device trees out there using them so they will
    need to be supported for some time.  They accidentally got left behind
    when the driver graduated from staging.
  - white space cleanup.
  - set INPUT_PROP_DIRECT.
  - move ts config into a better function.
  - move the STMP reset out of the ADC init.
* vf610_adc
  - case label indenting fix.

iio: inv_mpu6050: Add explicit support for MPU9150

This device is a package containing a MPU6050-like sensor and an AK8975
magnetometer. The magnetometer component is supported by the existing
ak8975 driver.

This patch also rephrases the Kconfig descriptions.

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Acked-by: Ge Gao <ggao@invensense.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: inv_mpu6050: Add spi_device_id for INV_MPU6500

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Acked-by: Ge Gao <ggao@invensense.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: inv_mpu6050: Check WHO_AM_I register on probe

This can be used to distinguish mpu6500. This is a warning rather than
an error because the differences are mostly irrelevant and it's nice to
avoid breaking users with slightly incorrect ACPI/DT.

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Acked-by: Ge Gao <ggao@invensense.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: inv_mpu6050: Remove inv_mpu6050_hw.num_reg

This field was unused and incorrect for mpu6500.

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: inv_mpu6050: Cleanup hw_info mapping

The hw_info array was indexed by enum inv_devices chip_type despite the
fact that the enumeration had more members than the array and was
ordered differently.

The patch cleans this up and adds explicit chip_types to i2c/spi/acpi
IDs. It also adds some stricter checks inside the driver core.

This happened to work so far because the differences between the
supported models are very minor.

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Acked-by: Ge Gao <ggao@invensense.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: pressure: bmp280: add ability to control oversampling rate

This adds ability to control the oversampling ratio of the temperature
and pressure measurement for both bmp180 and bmp280.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Vlad Dogaru <vlad.dogaru@intel.com>
Cc: Christoph Mair <christoph.mair@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: pressure: bmp280: add support for BMP180

This adds support for the BMP180 to the bmp280 iio driver.

The BMP180 has already been supported by misc/bmp085 driver but it
doesn't use iio framework.  This change adds the kconfig dependency
not to be selected both of them in order to avoid any issues.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Vlad Dogaru <vlad.dogaru@intel.com>
Cc: Christoph Mair <christoph.mair@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

max44000: Initial triggered buffer support

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

max44000: Expose ambient sensor scaling

This patch exposes ALSTIM as illuminance_integration_time and ALSPGA as
illuminance_scale.

Changing ALSTIM also changes the number of bits available in the data
register. This is handled inside raw value reading because:
* It's very easy to shift a few bits
* It allows SCALE and INT_TIME to be completely independent controls
* Buffer support requires constant scan_type.realbits per-channel

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

max44000: Support controlling LED current output

This is exposed as an output channel with "led" as an extend_name.

Other sensors also have support for controlling an external LED. It's
not clear that simply exposing an undecorated output channel is the
correct approach.

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

max44000: Initial support for proximity reading

The proximity sensor relies on sending pulses to an external IR led and
it is disabled by default on powerup. The driver will enable it with a
default power setting.

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

max44000: Initial support

This just adds support for reporting illuminance with default settings.

Important default registers are written on probe because the device
otherwise lacks a reset function.

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: humidity: Add triggered buffer support for AM2315

Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: humidity: Add support for AM2315

Add basic support for the Aosong AM2315 relative humidity
and ambient temperature sensor.
Includes support for raw readings and ACPI detection.

Datasheet:
http://www.aosong.com/asp_bin/Products/en/AM2315.pdf

Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: pressure: hp03: Add Hope RF HP03 sensor support

Add support for HopeRF pressure and temperature sensor.

This device uses two fixed I2C addresses, one for storing
calibration coefficients and another for accessing the ADC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Matt Ranostay <mranostay@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: st_gyro: Add lsm9ds0-gyro support

This device has an identical interface to other supported sensors and the patch
only adds IDs.

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: light: apds9960: silence uninitialized variable warning

It causes a static checker warning if we use "buf" on the failure path
so move that inside the if statement.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio:imu:mpu6050: enhance mounting matrix support

Add a new rotation matrix sysfs attribute compliant with IIO core
mounting matrix API.
Matrix is retrieved from "in_anglvel_mount_matrix" and
"in_accel_mount_matrix" sysfs attributes. It is declared into mpu6050 DTS
entry as a "mount-matrix" property.

Old interface is kept for backward userspace compatibility and may be
retrieved from legacy platform_data mechanism only.

Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio:ak8975: add mounting matrix support

Expose a rotation matrix to indicate userspace the chip orientation with
respect to the overall hardware system.
Matrix is retrieved from "in_mount_matrix". It is declared into ak8975 DTS
entry as a "mount-matrix" property.

Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio:core: mounting matrix support

Expose a rotation matrix to indicate userspace the chip placement with
respect to the overall hardware system. This is needed to adjust
coordinates sampled from a sensor chip when its position deviates from the
main hardware system.

Final coordinates computation is delegated to userspace since:
* computation may involve floating point arithmetics ;
* it allows an application to combine adjustments with arbitrary
  transformations.

This 3 dimentional space rotation matrix is expressed as 3x3 array of
strings to support floating point numbers. It may be retrieved from a
"[<dir>_][<type>_]mount_matrix" sysfs attribute file. It is declared into a
device / driver specific DTS property or platform data.

Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: gyro: bmg160: use regmap to retrieve struct device

Driver includes struct regmap and struct device in its global data.
Remove the struct device and use regmap API to retrieve device info.

Patch created using Coccinelle plus manual edits.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: accel: bmc150: use regmap to retrieve struct device

Driver includes struct regmap and struct device in its global data.
Remove the struct device and use regmap API to retrieve device info.

Patch created using Coccinelle plus manual edits.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Reviewed-by: Irina Tirdea <irina.tirdea@intel.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: Add Vishay VEML6070 UV A light sensor driver

ultraviolet (UV) light sensor with I2C interface with a peak
sensitivity at 355 nm

strangely, chip uses two addresses 0x38 and 0x39 for LSB and
MSB data, resp.

datasheet: http://www.vishay.com/docs/84277/veml6070.pdf

Signed-off-by: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: Add resource managed APIs devm_iio_channel_{get,release) in devres

Add following APIs in the list of managed resources of IIO:
devm_iio_channel_get()
devm_iio_channel_get_all()
devm_iio_channel_release()
devm_iio_channel_release_all()

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: core: Add devm_ APIs for iio_channel_{get,release}_all

Some of kernel driver uses the IIO framework to get the sensor
value via ADC or IIO HW driver. The client driver get iio channel
by iio_channel_get_all() and release it by calling
iio_channel_release_all().

Add resource managed version (devm_*) of these APIs so that if client
calls the devm_iio_channel_get_all() then it need not to release it
explicitly, it can be done by managed device framework when driver
get un-binded.

This reduces the code in error path and also need of .remove callback in
some cases.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: core: Add devm_ APIs for iio_channel_{get,release}

Some of kernel driver uses the IIO framework to get the sensor
value via ADC or IIO HW driver. The client driver get iio channel
by iio_channel_get() and release it by calling iio_channel_release().

Add resource managed version (devm_*) of these APIs so that if client
calls the devm_iio_channel_get() then it need not to release it explicitly,
it can be done by managed device framework when driver get un-binded.

This reduces the code in error path and also need of .remove callback in
some cases.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: tools: generic_buffer: auto-enable channels

If no channels are enabled when we run generic_buffer on a
device, add a command-line option to just enable all of them,
run the sampling and disable them all again afterwards.

This is extremely useful when I'm low-level testing my
sensors with interrupts and triggers, sample session:

root@Ux500:/ lsiio
Device 000: lsm303dlh_accel
Device 001: lis331dl_accel
Device 002: l3g4200d
Device 003: lsm303dlh_magn
Device 004: lps001wp
Trigger 000: lsm303dlh_accel-trigger
Trigger 001: lis331dl_accel-trigger
Trigger 002: l3g4200d-trigger

root@Ux500:/ generic_buffer -a -c 10 -n l3g4200d
iio device number being used is 2
iio trigger number being used is 2
No channels are enabled, enabling all channels
Enabling: in_anglvel_x_en
Enabling: in_anglvel_y_en
Enabling: in_anglvel_z_en
Enabling: in_timestamp_en
/sys/bus/iio/devices/iio:device2 l3g4200d-trigger
-3.593664 -0.713133 4.870143 946684863662292480
3.225546 0.867357 -4.945878 946684863671875000
-0.676413 0.127296 0.106641 946684863681488037
-0.661113 0.110160 0.128826 946684863690673828
-0.664173 0.113067 0.123471 946684863700683593
-0.664938 0.109395 0.124848 946684863710144042
-0.664173 0.110619 0.130203 946684863719512939
-0.666162 0.111231 0.132651 946684863729125976
-0.668610 0.111690 0.130662 946684863738739013
-0.660501 0.110466 0.131733 946684863748565673
Disabling: in_anglvel_x_en
Disabling: in_anglvel_y_en
Disabling: in_anglvel_z_en
Disabling: in_timestamp_en

Pure awesomeness. If some channels have been enabled through
scripts or manual interaction, nothing happens.

Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: st_sensors: support open drain mode

Some types of ST Sensors can be connected to the same IRQ line
as other peripherals using open drain. Add a device tree binding
and a sensor data property to flip the right bit in the interrupt
control register to enable open drain mode on the INT line.

If the line is set to be open drain, also tag on IRQF_SHARED
to the IRQ flags when requesting the interrupt, as the whole
point of using open drain interrupt lines is to share them with
more than one peripheral (wire-or).

Cc: devicetree@vger.kernel.org
Cc: Giuseppe Barba <giuseppe.barba@st.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Acked-by: Rob Herring <rob@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: st_sensors: verify interrupt event to status

This makes all ST sensor drivers check that they actually have
new data available for the requested channel(s) before claiming
an IRQ, by reading the status register (which is conveniently
the same for all ST sensors) and check that the channel has new
data before proceeding to read it and fill the buffer.

This way sensors can share an interrupt line: it can be flaged
as shared and then the sensor that did not fire will return
NO_IRQ, and the sensor that fired will handle the IRQ and
return IRQ_HANDLED.

Cc: Giuseppe Barba <giuseppe.barba@st.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: st_sensors: read each channel individually

The current buffer read code tries to optimize reads from the
sensor data registers by issuing a single read operation across
all the indata registers.

This doesn't work: when the LIS331DL accelerometer sensor is
configured to open drain, active low interrupt mode, this will
just clear the XDA (X-axis data available) bit in the STATUS_REG
register (0x27), while YDA, ZDA and even ZYXDA remain set to 1,
and the internal logic of the sensor holds the DRDY (INT1) line
asserted (the value of the status register is 0xee).

If we instead issue one read operation per enabled channel
(X, Y, Z) things start working and we can use open drain and
active low interrupts.

Note that a backported patch fixing this issue will be heading
via the fixes branch but changes in this file already in staging-next
will make that patch 'look' rather different.  The code in here
is the correct one when that clash hits.

Cc: Giuseppe Barba <giuseppe.barba@st.com>
Cc: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: mxs-lradc: move STMP reset out of ADC init

This patch moves the STMP reset out of ADC init function so as to remove
the possiblity of an error return which will be necessary for PM ops support
patches to follow.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: mxs-lradc: move TS config into suitable function

This patch moves the touchscreen type configuration into
a more suitable function. Btw this simplifies PM ops later.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: magn: bmc150: Introduce SPI support

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: magn: Split bmc150 driver in common/i2c parts

This is useful for easily adding SPI support in later patches.

Now bmc150_magn exports core functions to be used by I2C/SPI drivers
instances. For the moment only I2C driver is supported.

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Acked-by: Irina Tirdea <irina.tirdea@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: adc: set INPUT_PROP_DIRECT

Set INPUT_PROP_DIRECT to indicate that it is a touchscreen on the
device to help userspace classify it.

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

ti-adc081c: Initial triggered buffer support

Using this requires software triggers like CONFIG_IIO_HRTIMER_TRIGGER.

The device can be configured to do internal periodic sampling but does not
offer some sort of interrupt on data ready. Interrupts can only trigger when
values get out of a specific range.

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

ti-adc081c: Add support for adc101c and adc121c

These chips have an almost identical interface but support a different
number of value bits. Datasheet links for comparison:

 * http://www.ti.com/lit/ds/symlink/adc081c021.pdf
 * http://www.ti.com/lit/ds/symlink/adc101c021.pdf
 * http://www.ti.com/lit/ds/symlink/adc121c021.pdf

Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: frequency: ad9523: use unsigned int rather then bare unsigned

This fix checkpatch warnings:

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: light: new driver for the ROHM BH1780

This is a reimplementation of the old misc device driver for the
ROHM BH1780 ambient light sensor (drivers/misc/bh1780gli.c).

Differences from the old driver:
- Uses the IIO framework
- Uses runtime PM to idle the hardware after 5 seconds
- No weird custom power management from userspace
- No homebrewn values in sysfs

This uses the same (undocumented) device tree compatible-string
as the old driver ("rohm,bh1780gli").

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: adc: Indent if statement

Indent lines inside if statement.

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio:adis16240: Set self_test_no_autoclear flag

The ADIS16201 does not automatically clear the self test flag bit the self
test has been, so clear it manually. Otherwise we'll see a offset caused by
the self-test bias on the output values during normal operation.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio:adis16209: Set self_test_no_autoclear flag

The ADIS16201 does not automatically clear the self test flag bit the self
test has been, so clear it manually. Otherwise we'll see a offset caused by
the self-test bias on the output values during normal operation.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio:adis16203: Set self_test_no_autoclear flag

The ADIS16201 does not automatically clear the self test flag bit the self
test has been, so clear it manually. Otherwise we'll see a offset caused by
the self-test bias on the output values during normal operation.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging:iio:adis16201: Set self_test_no_autoclear flag

The ADIS16201 does not automatically clear the self test flag bit the self
test has been, so clear it manually. Otherwise we'll see a offset caused by
the self-test bias on the output values during normal operation.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio:adis: Add support for manual self-test flag clear

Some variants of the devices from the ADIS family don't auto-clear the
self-test bit after the self-test has completed. Instead we have to
manually clear. Add support for this to the ADIS library.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: pressure: ms5611: use tab for indention

This fixes the errors reported by checkpatch.pl:

ERROR: code indent should use tabs where possible

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: magnetometer: ak8975: put else and brace at the same line

This fixes the error reported by checkpatch.pl:

ERROR: else should follow close brace '}'

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: common: hid-sensors: use tab for indention

This fixes the error reported by checkpatch.pl:

ERROR: code indent should use tabs where possible

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: common: ms_sensors: use tab for indention

This fixes the error reported by checkpatch.pl:

ERROR: code indent should use tabs where possible

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: adc: ad799x: remove space before comma

This fixes the error reported by checkpatch.pl:

ERROR: space prohibited before that ',' (ctx:WxW)

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: adc: at91_adc: fix errors reported by checkpatch.pl

This fixes the errors reported by checkpatch.pl:

ERROR: space prohibited before that ',' (ctx:WxW)
ERROR: code indent should use tabs where possible

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: adc: mcp3422: remove spaces before comma

This fixes the error reported by checkpatch.pl:

ERROR: space prohibited before that ',' (ctx:WxW)

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: adc: vf610_adc: fix case label indent

This fixes the error reported by checkpatch.pl:

ERROR: switch and case should be at the same indent

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: inkern: add a missing space before if

This fixes the error reported by checkpatch.pl:

ERROR: space required before the open parenthesis '('

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: light apds9960: fix wrong use of brace

This fixes the error reported by checkpatch.pl:

ERROR: that open brace { should be on the previous line

Signed-off-by: Slawomir Stepien <sst@poczta.fm>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

iio: imu: Add initial support for Bosch BMI160

BMI160 is an Inertial Measurement Unit (IMU) which provides acceleration
and angular rate measurement. It also offers a secondary I2C interface
for connecting a magnetometer sensor (usually BMM160).

Current driver offers support for accelerometer and gyroscope readings
via sysfs or via buffer interface using an external trigger (e.g.
hrtimer). Data is retrieved from IMU via I2C or SPI interface.

Datasheet is at:
http://www.mouser.com/ds/2/783/BST-BMI160-DS000-07-786474.pdf

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

staging: unisys: visornic: prevent double-unlock of priv_lock

Previously, devdata->priv_lock was being unlocked in visornic_serverdown()
both before calling visornic_serverdown_complete(), then again at the end
of the function.  This bug was corrected.

The structure of visornic_serverdown() was also improved to make it easier
to follow and to decrease the chance that such bugs will be introduced
again.  The main-path logic now falls thru down the left-side of the page,
with a common error-exit point to handle error conditions.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorinput: remove erroneous 'FIXME' comments

These comments were mistakenly carried forward by a previous copy/paste.

Signed-off-by: Tim Sell <Timothy.Sell@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: removed unused 'visor_device.respond_to_device_create'

The respond_to_device_create flag was used previously when we used to
delay responses to create requests until the drivers were finished
loading. This behaviour was removed some time ago, yet the field still
existed, while never being referenced or even initialized.

Signed-off-by: Alexander Curtin <alexander.curtin@unisys.com>
Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: visorbus: make bus_epilog match device_epilog

The paths in bus_epilog should match device_epilog.

Signed-off-by: David Kershner <david.kershner@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>