staging: rtl8192u: Fix crash due to pointers being "confusing"

There's no net_device stashed in skb->cb, there's a net_device * there.

To make it *really* clear, also change the write of the dev pointer
into skb->cb from a memcpy() to an assignment.

Fixes: 3fe563249374 ("staging: rtl8192u: r8192U_core.c: Cleaning up ...")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: rewrite NULL comparison for pointers

When testing pointers, it is not necessary to explicitly compare to
NULL. Rewrite if condition as (!ptr) or (ptr) as suggested in
Documentation/CodingStyle

Signed-off-by: Nicholas Sim <nicholassimws@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: add blank line after declarations

Add a blank line after function/struct/union/enum declarations for
readability, as suggested in Documentation/CodingStyle

Signed-off-by: Nicholas Sim <nicholassimws@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove blank lines after braces (opening)

Remove unneeded blank lines appearing after opening braces as suggested
by checkpatch.pl

Signed-off-by: Nicholas Sim <nicholassimws@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: remove blank lines before braces (closing)

Remove unneeded blank lines occuring before closing braces

Signed-off-by: Nicholas Sim <nicholassimws@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: use container_of() instead of LIST_CONTAINOR()

This patch drops the local definition of LIST_CONTAINOR(), and uses
container_of() instead of it.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: skein: cleanup: align parentheses

Aligned parentheses to conform to the coding style.

Signed-off-by: Manu Kumar <maraku@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: skein: cleanup: add operator white space

Added white space between operators and operands. Because this sometimes
maxed out the column width, some expressions were broken up into multiple
lines, and comments were moved appropriately.

Signed-off-by: Manu Kumar <maraku@gmx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: use tty_alloc_driver instead of kcalloc

The tty_alloc_driver() can allocate memory for ttys and termios.
And also allocated memory will be released easily with
put_tty_driver() call.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove redundant NULL check in

There were already checking NULL about channel_t / un_t
before calling dgnc_maxcps_room().

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: return -ENOMEM when kzalloc failed

The kzalloc can be failed when memory is not enough
to allocate. When kzalloc failed, it need to return
error code with ENOMEM

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove blank line

fix checkpatch.pl warning:
Blank lines aren't necessary after an open brace '{'

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: remove parenthesis around the CONST |

remove parenthesis around the CONST | CONST.

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/dgnc: Added spaces around a bitwise OR.

Coding rules request placing bitwise OR operators between empty spaces
for better readibility. This patch applies this format to a line in
dgnc_tty.c file.

Signed-off-by: Juanma de Hoyos <juanmahv@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: memory allocated inside mkimage() is not freed if subsequent calls fails.

This patch frees memory allocated inside mkimage() in case mkimage()
or any other subsequent calls inside prism2_fwapply() from prism2fw.c
file fails. To fix this I introduces goto labels where the free
operation is done in case some operations fails. After the introduction
of goto labels has been done, in order to use the same return path,
"return x" instuctions were replaced with "goto" instuctions.

Signed-off-by: Claudiu Beznea <claudiu.beznea@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: rewrite NULL comparison

It is not necessary to compare explicitly to NULL. Rewrite if condition
as (!dev) or (dev) as suggested in Documentation/CodingStyle

Signed-off-by: Nicholas Sim <nicholassimws@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: dummy: fix dereference of ERR_PTR

ion_device_create() can fail and if it fails then it returns the error
value in ERR_PTR.

Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: android: modify memory allocation style in ion_chunk_heap.c

Modify memory allocation style in order to silence a checkpatch.pl
warning.

Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: android: modify memory allocation style in ion_test.c

Modifies the memory allocation style ion_test.c in order to remove a
checkpatch.pl warning

Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: make locally used functions static

Functions ion_handle_put and ion_handle_get_by_id are only used locally
in ion.c, so they should be made static as they used to be before
9590232b ("staging/android/ion : fix a race condition in the ion driver").

Signed-off-by: Markus Böhme <markus.boehme@mailbox.org>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation: add Sync File doc

Add sync_file documentation on dma-buf-sync_file.txt
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation: include sync_file into DocBook

Add entry in device-drivers.tmpl for sync_file documentation.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sync_file: de-stage sync_file

sync_file is useful to connect one or more fences to the file. The file is
used by userspace to track fences between drivers that share DMA bufs.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf/sync_file: de-stage sync_file headers

Move sync_file headers file to include/ dir.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: style fix: alignment to match the open parenthesis

Fix checks reported by checkpatch.pl.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: improve documentation for sync_file

num_fences was missing a colon mark and sync_file_create() now have
better description.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: prepare sync_file for de-staging

Move its functions and structs to their own file. Also moves function's
docs to the .c file.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: remove name arg from sync_file_create()

Simplifies the API to only receive the fence it needs to add to the
sync and create a name for the sync_file based on the fence context and
seqno.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: make sync_file_fdget() static

There is no plan in the near future to use this function outside of this
file so keep it as static.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: make sync_file_merge() static

There is no plan in the near future to use this function outside of this
file so keep it as static.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: move sync_file functions comments to sync.c

To keep comments in line with drivers/dma-buf/ move all sync_file comments
to sync.c.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: drop sync_file_install() and sync_file_put()

These two functions are just wrappers for one line functions, they
call fd_install() and fput() respectively, so just get rid of them
and use fd_install() and fput() directly for more simplicity.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: remove redundant comments on sync_merge_data

struct sync_merge_data already have documentation on top of the
struct definition. No need to duplicate it.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: refactor SYNC IOCTLs

Change SYNC_IOC_FILE_INFO (former SYNC_IOC_FENCE_INFO) behaviour to avoid
future API breaks and optimize buffer allocation.

Now num_fences can be filled by the caller to inform how many fences it
wants to retrieve from the kernel. If the num_fences passed is greater
than zero info->sync_fence_info should point to a buffer with enough space
to fit all fences.

However if num_fences passed to the kernel is 0, the kernel will reply
with number of fences of the sync_file.

Sending first an ioctl with num_fences = 0 can optimize buffer allocation,
in a first call with num_fences = 0 userspace will receive the actual
number of fences in the num_fences filed.

Then it can allocate a buffer with the correct size on sync_fence_info and
call SYNC_IOC_FILE_INFO again, but now with the actual value of num_fences
in the sync_file.

info->sync_fence_info was converted to __u64 pointer to prevent 32bit
compatibility issues. And a flags member was added.

An example userspace code for the later would be:

struct sync_file_info *info;
int err, size, num_fences;

info = malloc(sizeof(*info));

info.flags = 0;
err = ioctl(fd, SYNC_IOC_FILE_INFO, info);
num_fences = info->num_fences;

if (num_fences) {
info.flags = 0;
size = sizeof(struct sync_fence_info) * num_fences;
info->num_fences = num_fences;
info->sync_fence_info = (uint64_t) calloc(num_fences,
  sizeof(struct sync_fence_info));

err = ioctl(fd, SYNC_IOC_FILE_INFO, info);
}

Finally the IOCTLs numbers were changed to avoid any potential old
userspace running the old API to get weird errors. Changing the opcodes
will make them fail right away. This is just a precaution, there no
upstream users of these interfaces yet and the only user is Android, but
we don't expect anyone trying to run android userspace and all it
dependencies on top of upstream kernels.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Greg Hackmann <ghackmann@google.com>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel.h: add u64_to_user_ptr()

This function had copies in 3 different files. Unify them in kernel.h.

Cc: Joe Perches <joe@perches.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Daniel Vetter <daniel.vetter@intel.com> [drm/i915/]
Acked-by: Rob Clark <robdclark@gmail.com> [drm/msm/]
Acked-by: Lucas Stach <l.stach@pengutronix.de> [drm/etinav/]
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: Fix grammar error in Kconfig file

Remove the "s" from kills so that the help message is easier to understand

Signed-off-by: Leo Sperling <leosperling97@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MAINTAINERS: Add Android Ion as a separate entry

The android drivers have a few other people reviewing patches.
Add a separate entry to ensure patches go to the right people.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: Add warning about this driver being deprecated

This driver is deprecated and superseded by rtl8xxxu. It will be
removed in a future kernel release.

Add a warning to Kconfig and at device init time to notify users and
allow them time to switch over.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: don't expose CHSR_* bit defines

These bit defines are only used in the mite driver. Move them so they
are not needlessly exposed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: return void from mite_ack_linkc()

Currently this function returns the value read from the mite channel
status register. None of the callers use, or need, the returned value.

For aesthetics, change the return to void.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: make mite_ack_linkc() handle mite_sync_dma()

The mite dma is always synced on a LINKC status. Some of the mite users
sync the dma regadless of the status.

Add a 'sync' parameter to mite_ack_linkc() to force a dma sync. Then do
the dma sync as needed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: handle_a_interrupt() does not need ai_mite_status

This function only handles the analog input interrupts, the dma was already
handled.

Remove the unecessary parameter and fix ni_E_interrupts() so that the comedi
events are properly handled.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: simplify AI LINKC handling

Simplfy the LINKC handing for the analog input dma by moving it into
the main interrupt handler. This function already hold the spinlock
mite_channel_lock so call mite_sync_dma() directly instead of using
the helper function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: fix interrupt handler for dev->read_subdev

There may not be a dev->read_subdev, i.e. an analog input subdevice, that
supports async commands. If it doesn't exist the interrupt/dma will never
be enabled.  Fix ni_E_interrupt() so that the analog input subdevice is
only handled if it exists.

This also fixes minor NULL dereference issue in handle_a_interrupt().
If the dev->read_subdev is NULL the comedi_async pointer (s->async) will
not be allocated by the device postconfig so there is no way to get a
valid comedi_cmd (&s->async->cmd).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: handle_b_interrupt() does not need ao_mite_status

This function only handles the analog input interrupts, the dma was already
handled.

Remove the unecessary parameter and fix ni_E_interrupts() so that the comedi
events are properly handled.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: fix interrupt handler for dev->write_subdev

There may not be a dev->write_subdev, i.e. an analog output subdevice, that
supports async commands. If it doesn't exist the interrupt/dma will never
be enabled.  Fix ni_E_interrupt() so that the analog output subdevice is
only handled if it exists.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: absorb mite_handle_b_linkc()

Simplfy the LINKC handing by removing the helper function and moving
the mite_sync_dma() into the main interrupt handler.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: check for transfer errors in mite_ack_linkc()

Currently only some of the users of mite dma check for transfer errors.

The ni_mio_common code does the check for the analog input and analog
output subdevices. The m-series digital I/O subdevice and the counter
subdevices (handled by ni_tiocmd) do not check.

The ni_pcidio driver checks for the digital input subdevice.

The ni_660x driver counter subdevices (handled by ni_tiocmd) also do
not check.

Move the transfer error checking into mite_ack_linkc() so that the
drivers that use mite don't have to deal with it. This also makes
sure that all the subdevices that use mite for dma will cancel the
async command if a transfer error is detected.

Simplfy the transfer error check by just checking the CHSR_XFERR bit.
This bit will be set if one or more transfer processes terminated with
an error. The actual error is determined by the LERR, MERR, and DERR
bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: cleanup remaining mite register/bits

For aesthetics, convert the register/bit enums into defines and
use the BIT() macro to define the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: remove BUG_ON() in MITE_IODWBSR_1_WSIZE_bits()

Prior to calling this function pci_ioremap_bar() is called. If the
pci_resource_len(), i.e. the 'size', was 0 the ioremap would fail
so this function would never be called. So the first BUG_ON() can
never occur.

The 'order' returned by ilog2() will always be > 0 so the second
BUG_ON() will also never occur.

Remove the unnecessary BUG_ON() checks and tidy up the function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: document the mite_struct spinlock_t

Add a comment to fix the checkpatch.pl issue:
CHECK: spinlock_t definition without comment

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: rename CamelCase CHSR bit enums

Rename the CamelCase symbols to fix the checkpatch.pl issues.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: introduce mite_sync_dma()

The struct mite_channel 'dir' member specifies if the dma is input
or output. Wrap the mite_sync_input_dma() and mite_sync_output_dma()
functions with a single mite_sync_dma() so that the drivers don't
have to worry about the sync direction.

The functions that actually sync the input/output dma currently return
-1 if an overflow/underrun is detected otherwise they return 0. If an
overflow/underrun is detected the async->event COMEDI_CB_OVERFLOW is
also set.

The callers never check the return value anyway so just make the
functions return void. The async->event can be checked if necessary
to detect any errors.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: don't expose unnecessary register/bit info

Most of the mite registers are only accessed by the mite driver.
There is no reason to expose the register/bit info. Remove this
info from the header.

For aesthetics, convert the bit info enums into defines and use
the BIT() macro to define them. Tidy up the inline functions for
the retry limit and drq reqs bits in the config registers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: introduce mite_ack_linkc()

Introduce a helper function to handle the ack of a LINKC interrupt.
Tidy up the drivers that use the new helper.

The extra check for CHSR_INT in the ni_pcidio driver is not necessary.
This bit will be set if any of the interrupt sources, including CHSR_LINKC,
have generated an interrupt. Remove the extra check.

The mite_get_status() function is now only used by the mite driver.
Make it static and remove the export.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: don't expose mite_dma_reset()

This function is only called by the mite driver. Remove the inline
function from the header and make it static in the driver.

Use the function in mite_prep_dma() instead of duplicating the code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_pcidio: remove redundant mite disarm/reset

The mite_release_channel() will disarm and reset the mite channel.
Remove the redundant calls in ni_pcidio_release_di_mite_channel().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: remove mite_struct member 'daq_phys_addr'

This member of mite_struct is only used to map the mite I/O window.
For aesthetics, remove it and use a local variable instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: remove mite_struct member 'mite_phys_addr'

This member of mite_struct is set but never used. Just remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: don't export internal functions

The functions that get the number of bytes written to and read from
memory are only used internally by the mite driver when syncing the
dma channel. Make them static and remove the exports.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: remove mite_dma_tcr()

This exported function is not used by any of the comedi drivers. The
only call point in mite.c is commented out. Remove the unused function
and the export.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: remove TOP_OF_PAGE() macro

This macro is not used. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite: Prefer 'unsigned int' to bare use of 'unsigned'

Fix the checkpatch.pl issues.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: introduce NI_STC_DMA_CHAN_SEL()

The inline helper ni_stc_dma_channel_select_bitfield() returns the
bits needed to select a MITE channel to use for DMA. The MITE code
is setup to handle up to 8 channels but in reality only channels 0
to 3 are used by most of the drivers. The PCI-6032E and PCI-6033E
boards can also use channels 4 and 5.

For aesthetics, convert this inline function into a macro and
remove the BUG() which will never occur.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: mite.h: rename CHSR_LxERR_mask

Fix the checkpatch.pl issue:
CHECK: Avoid CamelCase: <CHSR_LxERR_mask>

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: fix CamelCase in ni_serial_hw_readwrite8()

Fix the checkpatch.pl issue:
CHECK: Avoid CamelCase: <Error>

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove 'fudge_factor_80_to_20Mhz'

For aesthetics, remove this local variable to fix the checkpatch.pl issue:
CHECK: Avoid CamelCase: <fudge_factor_80_to_20Mhz>

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: usleep_range is preferred over udelay

Fix the checkpatch.pl issues.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: tidy up ni_gpct_write_register()

The 'bits' value passed to this function is properly set by the callers
so the BUG_ON() can never occur when writing to the NITIO_G[01]_INT_ENA
and NITIO_G01_RESET registers. Remove the BUG_ON() checks.

For aesthetic, also remove the static const variables. They don't add
any additional clarity.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: tidy up AO scan begin

The (*do_cmdtest) validates that the cmd->scan_begin_src will only be
TRIG_TIMER or TRIG_EXT. Refactor ni_ao_cmd_set_update() and remove the
BUG() which can never occur.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: tidy up AO trigger selection

The AO subdevice (*cancel), ni_ao_reset(), always sets the private
data 'ao_trigger_select' to 0. So when a command is started the
'trigsel' value in ni_ao_cmd_set_trigger() will always start as 0.
Remove the unnecessary member from the private data.

The (*do_cmdtest) validates that the cmd->start_src will only be
TRIG_INT or TRIG_EXT. Refactor ni_ao_cmd_set_trigger() and remove
the BUG() which can never occur.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: convert NI_GPCT_SUBDEV to a macro

The 'counter_index' is always in range (0 to < NUM_GPCT, which is 2).

For aesthetics, convert this inline function into a macro and remove
the BUG() which can never occur.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: fix logical continuations

Fix the checkpatch.pl issues:
CHECK: Logical continuations should be on the previous line

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: multiple assignments should be avoided

Fix the checkpatch.pl issues.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: fix lines over 80 characters

Fix the checkpatch.pl issues.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: tidy up block comments

Fix the checkpatch.pl issues.
WARNING: Block comments use * on subsequent lines

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: use 'unsigned int' instead of kernel types

Generally comedi drivers use 'unsigned int' types instead of the kernel type
'u32' for unsigned 32-bit values.

For aesthetics, change all the 'u32' and 'uin32_t' types and fix the
checkpatch.pl issues about:
CHECK: Prefer kernel type 'u32' over 'uint32_t'

The various i/o helpers use for reading and writing the 32/16/8-bit registers
all start with an 'unsigned int' value for writing and finally return an
'unsigned int' value. For aesthetics, change all the 'uint16_t' and 'uint8_t'
types for insigned int and fix the checkpatch.pl issues about:
CHECK: Prefer kernel type 'u16' over 'uint16_t'

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: Prefer 'unsigned int' to bare use of 'unsigned'

Fix the checkpatch.pl issues.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: tidy up DIO subdevice ifdef'ery

This file is is bit of a mess. It's included by the ni_atmio, ni_mio_cs, and
ni_pcimio drivers. The ni_pcimio driver is the only one that uses DMA. It
defines PCIDMA so that the dma code is compiled it. This causes a bunch
of ifdef'ery in the file.

The DIO subdevice for the ni_pcidio "is_m_series" boards is quite different
from the standard e-series DIO. Mainly it supports async commands that use
DMA.

Tidy up some of the ifdef'ery by adding ifdef to the subdevice init. Move
the is_m_series check to the main interrupt handler so that the unneded
handle_cdio_interrupt() can be blocked out for the ni_atmio and ni_mio_cs
drivers.

Consolidate the other ifdef's to block out the affected code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: tidy up mite dma channel releases

Absorb the inline helper functions that call ni_set_bitfield() to clear
the dma channel selection bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: tidy up mite dma channel requests

Tidy up the functions that request the mite dma channels by absorbing the
inline helper functions that call ni_set_bitfield() to set the channel
selection bits.

Add support for the NI_M_CDIO_DMA_SEL_REG register to ni_set_bitfield()
so that all the soft_reg_copy_lock spinlocking is done in one place.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: remove some unnecessary BUG_ON()

The mite dma channels are only requested by a subdevice with a (*do_cmd)
and they are released by a (*cancel). The comedi core will only call the
(*do_cmd) if the subdevice is not already running a command and all
commands are terminated by the core with a (*cancel).

Remove the BUG_ON() checks in the request functions which can never
happen.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: update the MODULE_DESCRIPTION

Change the MODULE_DESCRIPTION to something more usefull than the
generic "Comedi low-level driver".

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: allow setting the external trigger polarity

The external pin TGIN can be used to start and/or stop the analog input
command. Currently the driver only supports negative edge polarity for
this signal.

Add support to allow the user to select positive edge polarity using
the CR_INVERT flag.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: clarify the analog input cmd triggers

Clarify the documentation in the comedi driver comment block to
better explain the cmd triggert.

Add a comment to step 2b of the (*do_cmdtest) to clarify the
trigger check.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: fix comments about the 'ao' board range

The waveform analog outputs on the 'ao' boards are not currently
supported. Modify the comment about the analog output range on
these boards so that the information is saved but fixes the
checkpatch.pl issues:
WARNING: Block comments use a trailing */ on a separate line

Move the comment so it's grouped with the comedi_lrange info.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: fix lines over 80 characters

These comments are just extra cruft. Remove them to fix the
checkpatch.pl issues:
WARNING: line over 80 characters

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: fix comments in das1800_ai_handler()

Fix the checkpatch.pl issues:
WARNING: line over 80 characters

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: fix comments in das1800_ai_cmd()

Fix the checkpatch.pl issues:
WARNING: Block comments use a trailing */ on a separate line
WARNING: line over 80 characters

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: remove the function comments

These comments are just added cruft. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: clarify step 4 of the ai (*do_cmdtest)

This step of the (*do_cmdtest) fixes the timing arguments when the
cmd->convert_src is TRIG_TIMER. The code is compact but it's a bit
hard to understand the "burst mode" vs. "non burst mode" (i.e. paced)
timing.

Clarify the fixup by splitting it into separate functions to check
the arguments based on if the command is doing 'paced' or 'burst'
timing. Add some comments to clarify the fixups.

This also fixes a minor issue with the 'burst' timing. When the
cmd->scan_begin_src is also TRIG_TIMER the pacer clock is used to
start each scan. The cmd->scan_begin_arg specifies the scan time.
The minimum (not maximum) value for this time must be large enough
for the 'burst' conversion time to sample all the channels.

The current 'max' check limits the scan time to the minimum time
(i.e. the max conversion speed).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: remove the private data member comments

The comments about the members of the private data are not really
necessary and removing them fixes a couple checkpatch.pl issues.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: move comment about max conversion speeds

For aesthetics, move this information into the comedi comment block.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: change type of private data 'fifo_buf'

Fix the checkpatch.pl issue:
CHECK: Prefer kernel type 'u16' over 'uint16_t'

Change the type to 'unsigned short' as that is more typical in comedi
drivers.

Use sizeof(*p) instead of sizeof(type) when allocation the buffer.
Also fix the checkpatch.pl issue:
WARNING: line over 80 characters

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: cleanup copyright and comedi comment blocks

Tidy up these multi-line comments to fix the checkpatch.pl issues:
WARNING: Block comments use * on subsequent lines
WARNING: line over 80 characters

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: document the spinlock

The comedi_device spinlock is used to protect the indirect addressing
selected by the DAS1800_SELECT register. It also prevents races between
the interrupt handler and the analog input (*poll).

Update the comments to make this clear.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: absorb control_a_bits()

Absorb this helper function into the analog input (*do_cmd).
For aesthetics, convert the switch code into if/else.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: use comedi_timeout()

Use the helper function to handle the busywaiting for the analog
input conversion to complete.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: refactor program_chanlist()

Refactor this function so it can be used to program the chanlist for
the analog input (*do_cmd) and (*insn_read).

Rename the function so it has namespace associated with the driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das1800: absorb control_c_bits()

Absorb this helper function into the analog input (*do_cmd).
For aesthetics, convert the switch code into if/else.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>