[POWERPC] pasemi: SMP timebase sync

Timebase update is simple on PA6T, since global updates can be done from
one core by writing to an SPR.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] pasemi: Implement restart

Implement reset on platforms/pasemi. Default is just to reset the
cpu using the SDC registers.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] pasemi: Idle loops

Powersave support on PA6T. Right now it only uses 'doze' mode, and
will default to no savings (spin).

Signed-off-by: Olof Johansson <olof@lixom.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] pasemi: Machine check handler

Print out decoded machine check information on PA6T.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] pasemi: UART udbg support

Early debug output for PA Semi UART. Uses the 2.05 CI real mode ops.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Assign all PCI busses on G3 Blue & White

G3 Blue & White is misconfigured by default so that CardBus controllers
in PCI slots don't work.  The PCI bridge is programmed to only allow
access to bus 1 but not higher busses.

The patch forces the PCI busses to be reassigned if a Grackle controller
is found and the machine identifies itself as "PowerMac1,1"

Signed-off-by: Pavel Roskin <proski@gnu.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Celleb: add celleb_defconfig

This patch creates defconfig file for Celleb platform.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Celleb: basic support

This patch adds base support for Celleb platform.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Celleb: support spu priv1 ops

SPU support routines for Celleb platform.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Celleb: consolidate spu management ops

Spu management ops in arch/platforms/cell/spu_priv1_mmio.h can be used
commonly in of based platform. This patch separates spu management ops
from native cell code and uses on celleb platform.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Celleb: hypervisor console driver

This patch adds hypervisor console driver for Celleb platform.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Celleb: support udbg

This patch adds udbg support for Celleb platform.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Celleb: htab routines

Adds htab routines for Celleb platform.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Celleb: support iommu

This patch creates Celleb platform dependent file to support iommu.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Celleb: setup usb host controller in SCC

USB host controller in SCC requires enable sequence. It should be done
before USB host drivers start.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Celleb: support interrupts

This patch creates Celleb platform dependent files to support interrupts.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Celleb: interfaces to the hypervisor

This patch creates Celleb platform dependent files which add
interfaces to call hypervisor.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] powermac: local_irq_disable() is redundant after local_irq_save()

arch/powerpc/platforms/powermac/smp.c::smp_core99_kick_cpu() contains
local_irq_disable() call after local_irq_save(). This looks
redundant.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] 86xx: local_irq_disable() is redundant after local_irq_save()

arch/powerpc/platforms/86xx/mpc86xx_smp.c::smp_86xx_kick_cpu() contains
local_irq_disable() call after local_irq_save(). This looks
redundant.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] mpc8272ads: defconfig

Default config file for mpc8272ads (powerpc port).Though relevant bits went
in, it is required to keep proper default configuration for the target,
which seems to be missed initially.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Fix kernel build errors for mpc8272ads and mpc8560ads

Recent update of asm-powerpc/io.h caused cpm-related stuff to break in the
current kernel. Current patch fixes it, as well as other inconsistencies
expressed, that do not permit targets from working properly:

- Updated dts with a chosen node with interrupt controller,
- fixed messed device IDs among CPM2 SoC devices,
- corrected odd header name and fixed type in defines,
- Added 82xx subdir to the powerpc/platforms Makefile, missed during
  initial commit,
- new solely-powerpc header file for 8260 family (was using one from
  arch/ppc, this one cleaned up from the extra stuff), in fact for now
  a placeholder to get the board-specific includes for stuff not yet
  capable to live with devicetree peeks only
- Fixed couple of misprints in reference mpc8272 dts.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] cpm2: CPM2 interrupt controller fix

This contains important fixes for the CPM2 PIC code. Eliminated
CPM_IRQ_OFFSET, pulling the respective interrupt numbers from the interrupt
mapping. Updated devicetree files to reflect that. Changed direct
IC-related IO accesses to the IO accessors. Fixed all the sense values to
keep coherency with ipic. In the current code, CPM2 stuff will have no IRQs
and hence could be hardly usable.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] PS3: Enable USB mass storage

Update ps3_defconfig to enable USB mass storage and VFAT.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] PS3: Fix DMA scatter-gather

Add the missing pieces to support DMA scatter-gather on the PS3 system bus.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] PS3: Move vuart declarations to ps3.h

Move the structures and routines needed for PS3 vuart port device registration
to asm-powerpc/ps3.h.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] PS3: Move system bus to platform directory

Move the PS3 system bus routines from drivers/ps3 to
arch/powerpc/platforms/ps3.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Add "is_power_of_2" checking to log2.h.

Add the inline function "is_power_of_2()" to log2.h, where the value
zero is *not* considered to be a power of two.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] MPIC: support more than 256 sources

Allow more than the default 256 MPIC sources. Allocates a new flag
(MPIC_LARGE_VECTORS) to be used by platform code when instantiating
the mpic.

I picked 11 bits worth right now since it would cover the number of
sources on any hardware I have seen. It can always be increased later
if needed.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] PA6T PMC support

Support for PA6T-style PMC registers.

PMCs are completely implementation-dependent on PPC, and PA6T numbers them
differently from the IBM model.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Introduce _SYSDEV_ATTR

Introduce _SYSDEV_ATTR(), to be used to just define the struct, and not a
named variable with the attribute. Useful for arrays of sysdev_attributes.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Add PMC type to cputable

Add cputable entries for which type of PMC implementation the processor
has.

I've only filled in the current 64-bit processors, the unfilled default
value will have same behaviour as before so it can be done over time
as needed.

Also tidy up the dummy_perf implementation a bit, aggregating it into
one function with ifdefs instead of several.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Oprofile cleanup

Clean up the ctr_read/write a bit. It's currently defined in the
include but only used in one C file each. The only exception is the
classic version, so keep that in the include and define in the C file
as appropriate.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Fix array indexing error in rheap grow()

The grow() function in the rheap library allocates a larger array of blocks,
copies the contents of the old blocks array to the newly allocated array and
fixes the list_head pointers after the copy.  At the end, the new blocks must
be enqueued to the empty_list of the rh_info_t structure.  This patch fixes
a bug where the code was indexing past the end of the array when enqueueing
blocks.  The UCC ethernet driver, which uses the rheap allocator, experiences
kernel panics because of this bug.

Signed-off-by: Ionut Nicu <ionut.nicu@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] ps3: ps3_defconfig updates

Updates for ps3_defconfig.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] ps3: remove unneeded header include

Remove an unneeded header include from ps3.h.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] ps3: get av_multi_out params

Allow the PS3 AV settings driver to access the default video mode stored in
the OS area.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] ps3: get firmware version

Add a new routine ps3_get_firmware_version() and use it to output the firmware
version to dmesg.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] ps3: remove cpuinfo

Remove the unneded routine ps3_show_cpuinfo().  The common platform code now
prints the same information.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] ps3: fix interrupt bmp

Add a comment and a preprocessor macro to help clearify the alignment
needs of the PS3 interrupt bitmap.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] ps3: add interrupt alloc for outlets

PS3 interrupt core update:
  - Add ps3_alloc_irq() and ps3_free_irq(), to allocate a virtual interrupt
    number for an interrupt outlet, which is needed by the PS3 GPU frame
    buffer device and audio drivers

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] ps3: bind interrupt to cpu

Change the PS3 irq allocation routines to take an argument indicating which
cpu (processor thread) the interrupt should be serviced on.

The current system configuration favors device interrupts that are serviced
on cpu0, so that is used as the default.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] ps3: cleanup interrupt bmp routines

Change the PS3 interrupt bitmask routines to be lockless.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] ps3: smp interrupt fixes

PS3 fixups for interrups on SMP.

Fixes the alignment of the interrupt status bitmap, changes the hypervisor
interrupt calls to the '_ext' versions that take an explicit processor
thread ID.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] ps3: rename interrupt symbols

Rename some PS3 interrupt symbols to avoid name clashes and aid debugging.
No change to code.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] ps3: fix struct alignment attributes

Remove incorrect alignment attributes in PS3 platform code for
struct spe_shadow, struct os_area_header, and struct os_area_params.

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] ps3: system bus minor mmio fix

Fix two minor bugs in the PS3 system bus mmio region code.  First, on error or
when freeing a region, retain the bus_addr and len fields to allow subsequent
calls to create the region.  Second, correct the region address argument to the
lv1_unmap_device_mmio_region() call.

Fixes modprobe/rmmod of some drivers.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] ps3: repository storage support

Handle storage-related repository data:
  - Add missing implementations of ps3_repository_read_stor_*() repository
    accessors.
  - Dump storage properties in debug mode
  - Add PS3_DEV_TYPE_STOR_{DISK,ROM,FLASH} device types (which are identical to
    the corresponding SCSI device types) to enum ps3_dev_type

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] ps3: repository misc fixes

Various fixes for the PS3 repository code:

  - Sync signatures of function prototypes and implementations (enum vs.
    unsigned int)
  - Correct references to `regions' as `registers':
      o Correct enum ps3_region_type as enum ps3_reg_type,
      o Correct PS3_REGION_TYPE_* as PS3_REG_TYPE_*,
      o Correct ps3_repository_find_region() as ps3_repository_find_reg().
  - Correct function name in pr_debug() call
  - Minor error condition improvements.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] pSeries: EEH improperly enabled for some Power4 systems

It appears that EEH is improperly enabled for some Power4 systems.
On these systems, the ibm,set-eeh-option returns a value of success
even when EEH is not supported on the given node. Thus, an explicit
check for support is required.

During boot, on power4, without this patch, one sees messages
similar to:

EEH: event on unsupported device, rc=0 dn=/pci@400000000110/IBM,sp@1
EEH: event on unsupported device, rc=0 dn=/pci@400000000110/pci@2
EEH: event on unsupported device, rc=0 dn=/pci@400000000110/pci@2,2
etc.

The patch makes these go away.

Without this patch, EEH recovery does seem to work correctly for
at least some devices (I tested ethernet e1000), but fails to
recover others (the Emulex LightPulse LPFC, most notably).
Off the top of my head, I don't remember why some devices are
affected, but not others.

The PAPR indicates that the correct way to test for EEH is as
done in this patch; its not clear to me if this was in the PAPR
all along, or recently added; if it was there all along, its not
clear to me why this hadn't been fixed long ago. I suspect only
certain firmware levels are affected.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Fix apparent typo "CONFIG_SERIAL_CPM_SMC".

  Replace an apparent typo of CONFIG_SERIAL_CPM_SMC with
CONFIG_SERIAL_CPM_SMC2.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Maple: don't override bus-range supplied by firmware

This workaround was copy-pasted from the powermac code.  It's not
necessary for maple.

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Add mpc866ads board-specific bits to arch/powerpc

This add support of the Freescale mpc86xads reference board to
arch/powerpc. Supported SMC1 and SMC2 (UART and serial console), FEC
100Mbps Ethernet, SCC1 Ethernet (10Mbps hdx)

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] 8xx: Add mpc885ads support and common mpc8xx files

This adds the core 8xx stuff and specifically mpc885ads board-specific
bits to arch/powerpc. Respective Kconfig has been cleaned up from the stuff
not yet ported over to avoid confusion. Updated and cleaned version.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] 8xx: powerpc port of core CPM PIC

This covers common CPM access functions, CPM interrupt controller code,
micropatch and a few compatibility things to kee the same driver base
working with arch/ppc. This version is refined with all the comments
(mostly PIC-related) addressed.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] 8xx: platform related changes to the fsl_soc

Added 8xx SoC peripherials: fec for Ethernet and smc for UARTs.
Ordinary routines to extract values from the device tree and insert
respective platform devices

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] 8xx: generic 8xx code arch/powerpc port

Including support for non-coherent cache, some mm-related things +
relevant field in Kconfig and Makefiles. Also included rheap.o compilation
if 8xx is defined.

Non-coherent mapping were refined and renamed according to Cristoph
Hellwig. Orphaned functions were cleaned up.

[Also removed arch/ppc/kernel/dma-mapping.c, because otherwise
compiling with ARCH=ppc for a non DMA-cache-coherent platform ends up
with two copies of __dma_alloc_coherent etc.
 -- paulus.]

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] 8xx: platform specific mmu updates

This is just a straight port of the same done in arch/ppc
by Marcelo Tosatti. One used to be
[PATCH] ppc32 8xx: update_mmu_cache() needs unconditional tlbie,
commit eb07d964b4491d1bb5864cd3d7e7633ccdda9a53

In a nutshell, the board is nearly stuck without this, yet without any
visible failure - being just very slow.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] cpm_uart: OF-related fix for CPM1

This makes cpm uart able to work using OF-passed parameters
in case of CPM stuff (found on most mpc8xx reference and custom
boards). The idea is to keep ppc stuff working yet making it able to be
used for powerpc.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] remove unused CPU_FTRS_POWER6X

CPU_FTRS_POWER6X is unused, hence remove it.

Signed-off-by Michael Neuling <mikey@neuling.org>

Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] 83xx: Add the mpc8323emds.dts

Add the mpc8323emds device tree source (dts)

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] 83xx: Add the mpc832xemds defconfig

The defconfig for the 8323EMDS is identical to the 8360E MDS defconfig,
except CONFIG_MATH_EMULATION is set, since the 8323 doesn't have a FPU.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] Enable stack debug features on ppc32

Enable stack overflow checking (DEBUG_STACKOVERFLOW) and stack usage
(DEBUG_STACK_USAGE) on ppc32.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

Merge branch '83xx' into for_paulus

[POWERPC] 83xx: Fix compiler warnings on 836x and 832x

Some prototypes are separated from of_device.h into of_platform.h.  Add
the new include to fix warning.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] Remove fastcall function attribute

fastcall is an x86 specific function attribute and has no business in ppc code

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] 83xx: Return a point to the struct ipic from ipic_init()

It's useful to have access to struct ipic handle that just got created
in ipic_init().

For example, if we want to setup an external IRQ with out
a device node we need access ipic->irqhost to create the virtual to HW
IRQ mapping and to set the IRQ sense.  With this we can mimic the old
sense array concept that existed in arch/ppc.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] 83xx:  Make platform *_init_IRQ() static

Make the various 83xx *_init_IRQ() functions static

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] 83xx: Don't call ioremap in the reset function

It's possibly that we get an reset requestion when interrupts are disabled.
(For example an oops in an interrupt handler).  Therefor, we can't call
ioremap in the reset function.  Moving the ioremap of the registers we
need access to an arch_initcall helps the problem.

However we still have a window between boot and the arch_initcall in
which the register pointer will not be setup and thus we spin if the reset
function is called.  If one needs to ensure even this case is covered, look
at use of the watchdog provided on 83xx to reset the processor.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] 83xx: Fix Kconfig to only enable FP math emulation for the MPC832x

Updated MATH_EMULATION depends to be on PPC_MPC832x instead of PPC_83xx.  Only
the the MPC832x has no floating point unit in the core.  Updated the other
83xx defconfigs that got math emulation turned on incorrectly.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

[POWERPC] Celleb: setup sio in SCC

This patch setup serial interfaces in SCC to work with serial_txx9
driver.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Celleb: Support PCI bus and base of I/O

This patch includes support for pci buses, base of Celleb specific
devices, and etc. It works on of_platform bus.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Celleb: Cell SCC definitions

Adds Cell SCC(Super Companion Chip) definitions.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Celleb: hypervisor call numbers

This patch creates Celleb platform dependent file to define Beat
hypervisor call numbers.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Add IRQ remapping hook

This patch adds irq remapping hook. On interrupt mechanism on Beat,
when an irq outlet which has an id which is formerly used is created,
remapping the irq is required.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Add a field for each specific bus to struct pci_controller

Struct pci_controller doesn't prepare for the dependent data of each
specific bus. This patch adds private member to struct pci_controller.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Fix oprofile support on Cell LPAR

Op_model_cell supports native Cell. By returning -EINVAL, oprofile
uses timer interrupt on Cell LPAR.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] TLB insertion cleanup

This patch changes handling return value of ppc_md.hpte_insert() into
the same way as __hash_page_*().

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] spufs: Add SPU register lock

spu->register_lock should be held before accessing registers.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Remove the broken Gemini support

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Mask 32-bit system call arguments to 32 bits on PPC64 in audit code

The system call entry code will clear the high bits of argument
registers before invoking the system call; don't report whatever noise
happens to be in the high bits of the register before that happens.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Select DEFAULT_UIMAGE for HPC-NET/8641

I suspect this was meant to be added like it was to a whole slew of
other u-boot based boards, but probably just fell through the cracks.

Add "select DEFAULT_UIMAGE" for the 8641/HPC-NET.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Update fixup_winbond_82c105 comment

Note all POWER3/POWER4 systems where fixup_winbond_82c105 will run.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] maple: improve CPC9x5 host bridge detection

Identify CPC9x5 PCI Express, AGP, and HT host bridges using
device_type and compatible properties, which is a more flexible method
than using the name property (which can differ between firmwares and
models).

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Add support for R_PPC_ADDR16_HI relocations

apply_relocate_add() does not support R_PPC_ADDR16_HI relocations, which
prevents some non gcc-built modules to be loaded.

Signed-off-by: Simon Vallet <svallet@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] arch/powerpc/sysdev/cpm2_pic.c of_node_get cleanup

Remove redundant argument check for of_node_get().
It's ok to remove 'node' check because in real life cpm2_pic_init()
never gets called with node == NULL.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] arch/powerpc/sysdev/qe_lib of_node_get cleanup

No need for ?: as of_node_get() can handle NULL argument.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
 arch/powerpc/sysdev/qe_lib/qe_ic.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] arch/powerpc/sysdev/mpic.c of_node_get cleanup

No need for ?: because of_node_get() can handle NULL argument.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] arch/powerpc/sysdev/ipic.c of_node_get cleanup

No need for ?: because of_node_get() can handle NULL argument.

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] arch/powerpc/kernel/vio.c of_node_put cleanup

Remove redundant argument check for of_node_put().

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] arch/ppc/kernel/prom.c of_node_(get|put) cleanup

Remove redundant argument checks for of_node_get() and of_node_put().

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Do not write virq back to PCI config space

- Drivers will not rely on the PCI config space value, as they've
  already been conditioned to rely on the irq field in "struct pci_dev".

- The virq value may not be < 256 as it has been remapped.

- The PCI config space should reflect the hardware configuration, which
  is not being changed.  We are only creating a virtual irq mapping that
  exists in the kernel only. One would never expect the PCI hardware to
  generate the "virq" interrupt.

Signed-off-by: Michal Ostrowski <mostrows@watson.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Move ELF_ET_DYN_BASE up to 512MB point

I often test new versions of glibc by doing:

LD_LIBRARY_PATH=/XXX/lib /XXX/lib/ld.so.1 <binary>

One test case ended up SEGV'ing. Upon closer inspection ld.so was loaded
at 0x8000000 (128MB) with the heap right after it. Since we normally
link binaries at 0x10000000 (256MB) we only had about 128MB of space for
the heap:

00100000-00103000 r-xp 00100000 00:00 0           [vdso]
08000000-0801e000 r-xp 00000000 00:01 33079       /lib/ld-2.5.so
0802d000-0802f000 rwxp 0001d000 00:01 33079       /lib/ld-2.5.so
0802f000-08050000 rwxp 0802f000 00:00 0           [heap]
0fe91000-0ffd9000 r-xp 00000000 00:01 33082       /lib/libc-2.5.so
0ffd9000-0ffe8000 ---p 00148000 00:01 33082       /lib/libc-2.5.so
0ffe8000-0ffea000 r--p 00147000 00:01 33082       /lib/libc-2.5.so
0ffea000-0ffed000 rwxp 00149000 00:01 33082       /lib/libc-2.5.so
10000000-10004000 r-xp 00000000 00:01 76          /bin/sleep
10013000-10014000 rwxp 00003000 00:01 76          /bin/sleep
ffb41000-ffb56000 rw-p ffb41000 00:00 0           [stack]

One way to fix this is move ELF_ET_DYN_BASE from 0x08000000 to 0x20000000.
This allows 128MB for the binary (hopefully enough for even the most
crazy c++ apps), and with our current layout we will grow the heap up
and the stack down, allowing potentially gigabytes of heap:

00100000-00103000 r-xp 00100000 00:00 0           [vdso]
0fe8a000-0ffd3000 r-xp 00000000 00:01 3350        /lib/tls/libc-2.3.6.so
0ffd3000-0ffe3000 ---p 00149000 00:01 3350        /lib/tls/libc-2.3.6.so
0ffe3000-0ffea000 r--p 00149000 00:01 3350        /lib/tls/libc-2.3.6.so
0ffea000-0ffee000 rwxp 00150000 00:01 3350        /lib/tls/libc-2.3.6.so
10000000-10004000 r-xp 00000000 00:01 76          /bin/sleep
10013000-10014000 rwxp 00003000 00:01 76          /bin/sleep
20000000-20018000 r-xp 00000000 00:01 3478        /lib/ld-2.3.6.so
20028000-20029000 r--p 00018000 00:01 3478        /lib/ld-2.3.6.so
20029000-2002a000 rwxp 00019000 00:01 3478        /lib/ld-2.3.6.so
2002a000-2004b000 rwxp 2002a000 00:00 0           [heap]
ffd67000-ffd7c000 rw-p ffd67000 00:00 0           [stack]

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Clarify EEH error message

Clarify error message re EEH permanent failure.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] Use is_init() instead of pid==1

Use is_init() rather than hard coded pid comparison.

Cc: Anton Blanchard <anton@samba.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] ps3_free_io_irq: Fix inverted error check

ps3_free_io_irq: Fix inverted error check after calling
lv1_destruct_io_irq_outlet().

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[POWERPC] PS3: Fix uniprocessor kernel build

Allow to build a uniprocessor kernel for PS3.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

[PATCH] x86: fix PDA variables to work during boot

The current PDA code, which went in in post 2.6.19 has a flaw in that it
doesn't correctly cycle the GDT and %GS segment through the boot PDA,
the CPU PDA and finally the per-cpu PDA.

The bug generally doesn't show up if the boot CPU id is zero, but
everything falls apart for a non zero boot CPU id.  The basically kills
voyager which is perfectly capable of doing non zero CPU id boots, so
voyager currently won't boot without this.

The fix is to be careful and actually do the GDT setups correctly.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (84 commits)
  [JFFS2] debug.h: include <linux/sched.h> for current->pid
  [MTD] OneNAND: Handle DDP chip boundary during read-while-load
  [MTD] OneNAND: return ecc error code only when 2-bit ecc occurs
  [MTD] OneNAND: Implement read-while-load
  [MTD] OneNAND: fix onenand_wait bug in read ecc error
  [MTD] OneNAND: release CPU in cycles
  [MTD] OneNAND: add subpage write support
  [MTD] OneNAND: fix onenand_wait bug
  [JFFS2] use the ref_offset macro
  [JFFS2] Reschedule in loops
  [JFFS2] Fix error-path leak in summary scan
  [JFFS2] add cond_resched() when garbage collecting deletion dirent
  [MTD] Nuke IVR leftovers
  [MTD] OneNAND: fix oob handling in recent oob patch
  [MTD] Fix ssfdc blksize typo
  [JFFS2] replace kmalloc+memset with kzalloc
  [MTD] Fix SSFDC build for variable blocksize.
  [MTD] ESB2ROM uses PCI
  [MTD] of_device-based physmap driver
  [MTD] Support combined RedBoot FIS directory and configuration area
  ...

[PATCH] vmx: Fix register constraint in launch code

Both "=r" and "=g" breaks my build on i386:

  $ make
    CC [M]  drivers/kvm/vmx.o
  {standard input}: Assembler messages:
  {standard input}:3318: Error: bad register name `%sil'
  make[1]: *** [drivers/kvm/vmx.o] Error 1
  make: *** [_module_drivers/kvm] Error 2

The reason is that setbe requires an 8-bit register but "=r" does not
constrain the target register to be one that has an 8-bit version on
i386.

According to

http://gcc.gnu.org/bugzilla/show_bug.cgi?id=10153

the correct constraint is "=q".

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge /pub/scm/linux/kernel/git/gregkh/pci-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  PCI: fix pci-driver kernel-doc
  PCI: rework Documentation/pci.txt
  PCI: Unhide the SMBus on the Asus P4P800-X