Ralf Baechle [Wed, 9 Oct 2013 12:08:09 +0000 (14:08 +0200)]
uprobes: Remove the wrong __weak attribute
linux/uprobes.h declares arch_uprobe_skip_sstep() as a weak function.
But as there is no definition of generic version so when trying to build
uprobes for an architecture that doesn't yet have a arch_uprobe_skip_sstep()
implementation, the vmlinux will try to call arch_uprobe_skip_sstep()
somehwere in Stupidhistan leading to a system crash. We rather want a
proper link error so remove arch_uprobe_skip_sstep().
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Peter Zijlstra [Mon, 7 Oct 2013 15:12:48 +0000 (17:12 +0200)]
perf: Fix the perf context switch optimization
Currently we only optimize the context switch between two
contexts that have the same parent; this forgoes the
optimization between parent and child context, even though these
contexts could be equivalent too.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Shishkin, Alexander <alexander.shishkin@intel.com>
Link: http://lkml.kernel.org/r/20131007164257.GH3081@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Thu, 24 Oct 2013 10:52:06 +0000 (12:52 +0200)]
perf/x86: Further optimize copy_from_user_nmi()
Now that we can deal with nested NMI due to IRET re-enabling NMIs and
can deal with faults from NMI by making sure we preserve CR2 over NMIs
we can in fact simply access user-space memory from NMI context.
So rewrite copy_from_user_nmi() to use __copy_from_user_inatomic() and
rework the fault path to do the minimal required work before taking
the in_atomic() fault handler.
In particular avoid perf_sw_event() which would make perf recurse on
itself (it should be harmless as our recursion protections should be
able to deal with this -- but why tempt fate).
Also rename notify_page_fault() to kprobes_fault() as that is a much
better name; there is no notifier in it and its specific to kprobes.
Don measured that his worst case NMI path shrunk from ~300K cycles to
~150K cycles.
Cc: Stephane Eranian <eranian@google.com>
Cc: jmario@redhat.com
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: dave.hansen@linux.intel.com
Tested-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131024105206.GM2490@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Wed, 16 Oct 2013 22:06:46 +0000 (00:06 +0200)]
perf: Change zero-padding of strings in perf_event_mmap_event()
Oleg complained about the excessive 0-ing in perf_event_mmap_event(),
so try and be smarter about it while keeping it fairly fool proof and
avoid leaking random bits out to userspace.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-8jirlm99m6if2z13wd6rbyu6@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Oleg Nesterov [Wed, 16 Oct 2013 20:10:04 +0000 (22:10 +0200)]
perf: Do not waste PAGE_SIZE bytes for ALIGN(8) in perf_event_mmap_event()
perf_event_mmap_event() does kzalloc(PATH_MAX + sizeof(u64)) to
ensure we can align the size later. However this means that we
actually allocate PAGE_SIZE * 2 buffer, seems too much.
Change this code to allocate PATH_MAX==PAGE_SIZE bytes, but tell
d_path() to not use the last sizeof(u64) bytes.
Note: it is not clear why do we need __GFP_ZERO, see the next patch.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131016201004.GC23214@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Oleg Nesterov [Wed, 16 Oct 2013 20:09:45 +0000 (22:09 +0200)]
perf: Kill the dead !vma->vm_mm code in perf_event_mmap_event()
1. perf_event_mmap(vma) is never called with a gate_vma-like arg,
remove the "if (!vma->vm_mm)" code.
2. arch_vma_name() can use the chached value of mmap_event->vma.
3. Change the code to not call arch_vma_name() twice.
4. Purely cosmetic, but since we use "goto got_name" all the time
remove "else" from "[stack]" branch just for symmetry.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131016200945.GB23214@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Thu, 17 Oct 2013 13:36:19 +0000 (15:36 +0200)]
perf: Remove useless atomic_t
There's nothing atomic about atomic_set vs atomic_read; so remove the
atomic_t usage.
Also, make running_sample_length static as it really is (and should
be) local to this translation unit.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: eranian@google.com
Cc: Don Zickus <dzickus@redhat.com>
Cc: jmario@redhat.com
Cc: acme@infradead.org
Cc: dave.hansen@linux.intel.com
Link: http://lkml.kernel.org/n/tip-vw9lg588x1ic248whybjon0c@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Tue, 29 Oct 2013 10:23:32 +0000 (11:23 +0100)]
Merge branch 'perf/urgent' into perf/core
Conflicts:
tools/perf/builtin-record.c
tools/perf/builtin-top.c
tools/perf/util/hist.h
Ingo Molnar [Tue, 29 Oct 2013 08:06:07 +0000 (09:06 +0100)]
Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
* Add color overhead for stdio output buffer, which fixes
--stdio output being chopped up on the hot (red) entries,
fix from Jiri Olsa.
* Get 'perf record -g -a sleep 1' working again, removing the
need for -- separating perf options from the workload, restoring
ages old behaviour, fix from Jiri Olsa.
More patches allowing ~/.perfconfig setting up of default
callchain collecting method ("fp" or "dwarf") left for next
merge window.
* Fixup mmap event consumption, where we were acking the
consumption by writing the tail before actually accessing
the event, which could lead to using overwritten records
in things like 'perf record --call-graph'. From Zhouyi Zhou.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Zhouyi Zhou [Thu, 24 Oct 2013 07:43:33 +0000 (15:43 +0800)]
perf tools: Fixup mmap event consumption
The tail position of the event buffer should only be modified after
actually use that event.
If not the event buffer could be invalid before use, and segment fault
occurs when invoking perf top -G.
Signed-off-by: Zhouyi Zhou <yizhouzhou@ict.ac.cn>
Cc: David Ahern <dsahern@gmail.com>
Cc: Zhouyi Zhou <yizhouzhou@ict.ac.cn>
Link: http://lkml.kernel.org/r/1382600613-32177-1-git-send-email-zhouzhouyi@gmail.com
[ Simplified the logic using exit gotos and renamed write_tail method to mmap_consume ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sat, 26 Oct 2013 14:25:34 +0000 (16:25 +0200)]
perf top: Split -G and --call-graph
Splitting -G and --call-graph for record command, so we could use '-G'
with no option.
The '-G' option now takes NO argument and enables the configured unwind
method, which is currently the frame pointers method.
It will be possible to configure unwind method via config file in
upcoming patches.
All current '-G' arguments is overtaken by --call-graph option.
NOTE: The documentation for top --call-graph option
was wrongly copied from report command.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: David Ahern <dsahern@gmail.com>
Tested-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1382797536-32303-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sat, 26 Oct 2013 14:25:33 +0000 (16:25 +0200)]
perf record: Split -g and --call-graph
Splitting -g and --call-graph for record command, so we could use '-g'
with no option.
The '-g' option now takes NO argument and enables the configured unwind
method, which is currently the frame pointers method.
It will be possible to configure unwind method via config file in
upcoming patches.
All current '-g' arguments is overtaken by --call-graph option.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: David Ahern <dsahern@gmail.com>
Tested-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1382797536-32303-2-git-send-email-jolsa@redhat.com
[ reordered -g/--call-graph on --help and expanded the man page
according to comments by David Ahern and Namhyung Kim ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 25 Oct 2013 11:24:53 +0000 (13:24 +0200)]
perf hists: Add color overhead for stdio output buffer
Following commit tightened up the buffer size for output to strict width
of used format columns:
99cf666 perf hists: Fix formatting of long symbol names
This works fine until you hit color overhead output which places extra
bytes into output buffer. We need to account for color overhead in the
output buffer. Adding maximum color byte size to the output buffer size.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1382700293-1803-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Mon, 28 Oct 2013 14:56:50 +0000 (15:56 +0100)]
Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
* Fix up /proc/PID/maps parsing, where perfectly fine mmap entries
were being trown away when synthesizing PERF_RECORD_MMAP for
preexisting threads, prevenging symbol resolution to work
for those threads, broken in the MMAP2 removal. Reported and
pinpointed by Markus Trippelsdorf,
* Fix mem leak in the python 'perf script' backend, due to missing Py_DECREFs
on dict entries, fix from Joseph Schuchart.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnaldo Carvalho de Melo [Mon, 28 Oct 2013 12:38:12 +0000 (09:38 -0300)]
perf tools: Fix up /proc/PID/maps parsing
When introducing support for MMAP2 we considered more parts of each map
representation in /proc/PID/maps, and when disabling it we forgot to
reduce the number of expected parsed/assigned entries in the sscanf
call, fix it to expect the right number of desired fields, 5.
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Based-on-a-patch-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-vrbo1wik997ahjzl1chm3bdm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Sun, 27 Oct 2013 23:12:03 +0000 (16:12 -0700)]
Linux 3.12-rc7
Linus Torvalds [Sun, 27 Oct 2013 17:45:00 +0000 (10:45 -0700)]
Merge branch 'parisc-3.12' of git://git./linux/kernel/git/deller/parisc-linux
Pull parisc fix from Helge Deller:
"This is a 2-line patch to save the CPU register which holds our task
thread info pointer before calling a firmware function and then to
restore it again afterwards.
This is necessary because on some 64bit machines the high-order 32bits
are being clobbered by the firmware call, and thus we failed to bring
up secondary CPUs (and instead crashed the kernel) in some situations
eg if we had more than 4GB RAM. This patch fixes a bug which has been
since ever in the parisc linux kernel and which prevented some people
to use a 64bit kernel"
* 'parisc-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Do not crash 64bit SMP kernels on machines with >= 4GB RAM
Linus Torvalds [Sun, 27 Oct 2013 17:29:25 +0000 (10:29 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"This tree contains a clockevents regression fix for certain ARM
subarchitectures"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clockevents: Sanitize ticks to nsec conversion
Linus Torvalds [Sun, 27 Oct 2013 17:28:35 +0000 (10:28 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"The tree contains three fixes:
- Two tooling fixes
- Reversal of the new 'MMAP2' extended mmap record ABI, introduced in
this merge window. (Patches were proposed to fix it but it was all
a bit late and we felt it's safer to just delay the ABI one more
kernel release and do it right)"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Disable PERF_RECORD_MMAP2 support
perf scripting perl: Fix build error on Fedora 12
perf probe: Fix to initialize fname always before use it
Linus Torvalds [Sun, 27 Oct 2013 17:18:15 +0000 (10:18 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"This tree fixes a boot crash in CONFIG_DEBUG_MUTEXES=y kernels, on
kernels built with GCC 3.x (there are still such distros)"
Side note: it's not just a fix for old gcc versions, it's also removing
an incredibly broken/subtle check that LLVM had issues with, and that
made no sense.
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mutex: Avoid gcc version dependent __builtin_constant_p() usage
Linus Torvalds [Sun, 27 Oct 2013 17:16:33 +0000 (10:16 -0700)]
Merge git://git./linux/kernel/git/nab/target-pending
Pull SCSI target fixes from Nicholas Bellinger:
"Here are the outstanding target pending fixes for v3.12-rc7.
This includes a number of EXTENDED_COPY related fixes as a result of
Thomas and Doug's continuing testing and feedback.
Also included is an important vhost/scsi fix that addresses a long
standing issue where the 'write' parameter for get_user_pages_fast()
was incorrectly set for virtio-scsi WRITEs -> DMA_TO_DEVICE, and not
for virtio-scsi READs -> DMA_FROM_DEVICE.
This resulted in random userspace segfaults and other unpleasantness
on KVM host, and unfortunately has been an issue since the initial
merge of vhost/scsi in v3.6. This patch is CC'ed to stable, along
with two other less critical items"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
vhost/scsi: Fix incorrect usage of get_user_pages_fast write parameter
target/pscsi: fix return value check
target: Fail XCOPY for non matching source + destination block_size
target: Generate failure for XCOPY I/O with non-zero scsi_status
target: Add missing XCOPY I/O operation sense_buffer
iser-target: check device before dereferencing its variable
target: Return an error for WRITE SAME with ANCHOR==1
target: Fix assignment of LUN in tracepoints
target: Reject EXTENDED_COPY when emulate_3pc is disabled
target: Allow non zero ListID in EXTENDED_COPY parameter list
target: Make target_do_xcopy failures return INVALID_PARAMETER_LIST
Linus Torvalds [Sun, 27 Oct 2013 17:13:03 +0000 (10:13 -0700)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine fixes from Vinod Koul:
"Here is the late fixes pull request for dmaengine while you fly back
from KS.
We have a new dmaengine ML hosted by vger so a patch for that along
with addition of Dave as driver mainatainer for ioat. Other fixes are
memeory leak fixes on edma driver, small fixes on rcar-hpbdma driver
by Sergei"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: edma: fix another memory leak
dma: edma: Fix memory leak
MAINTAINERS: add to ioatdma maintainer list
MAINTAINERS: add the new dmaengine mailing list
Helge Deller [Sat, 26 Oct 2013 21:19:25 +0000 (23:19 +0200)]
parisc: Do not crash 64bit SMP kernels on machines with >= 4GB RAM
Since the beginning of the parisc-linux port, sometimes 64bit SMP kernels were
not able to bring up other CPUs than the monarch CPU and instead crashed the
kernel. The reason was unclear, esp. since it involved various machines (e.g.
J5600, J6750 and SuperDome). Testing showed, that those crashes didn't happened
when less than 4GB were installed, or if a 32bit Linux kernel was booted.
In the end, the fix for those SMP problems is trivial:
During the early phase of the initialization of the CPUs, including the monarch
CPU, the PDC_PSW firmware function to enable WIDE (=64bit) mode is called.
It's documented that this firmware function may clobber various registers, and
one one of those possibly clobbered registers is %cr30 which holds the task
thread info pointer.
Now, if %cr30 would always have been clobbered, then this bug would have been
detected much earlier. But lots of testing finally showed, that - at least for
%cr30 - on some machines only the upper 32bits of the 64bit register suddenly
turned zero after the firmware call.
So, after finding the root cause, the explanation for the various crashes
became clear:
- On 32bit SMP Linux kernels all upper 32bit were zero, so we didn't faced this
problem.
- Monarch CPUs in 64bit mode always booted sucessfully, because the inital task
thread info pointer was below 4GB.
- Secondary CPUs booted sucessfully on machines with less than 4GB RAM because
the upper 32bit were zero anyay.
- Secondary CPus failed to boot if we had more than 4GB RAM and the task thread
info pointer was located above the 4GB boundary.
Finally, the patch to fix this problem is trivial by saving the %cr30 register
before the firmware call and restoring it afterwards.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: <stable@vger.kernel.org> # 2.6.12+
Signed-off-by: Helge Deller <deller@gmx.de>
Linus Torvalds [Sat, 26 Oct 2013 03:38:47 +0000 (04:38 +0100)]
Merge tag 'pm+acpi-3.12-rc7' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from
"These fix two bugs in the intel_pstate driver, a hibernate bug leading
to nasty resume failures sometimes and acpi-cpufreq initialization bug
that causes problems to happen during module unload when intel_pstate
is in use.
Specifics:
- Fix for rounding errors in intel_pstate causing CPU utilization to
be underestimated from Brennan Shacklett.
- intel_pstate fix to always use the correct max pstate value when
computing the min pstate from Dirk Brandewie.
- Hibernation fix for deadlocking resume in cases when the probing of
the device containing the image is deferred from Russ Dill.
- acpi-cpufreq fix to prevent the module from staying in memory when
the driver cannot be registered and then attempting to unregister
things that have never been registered on exit"
* tag 'pm+acpi-3.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
acpi-cpufreq: Fail initialization if driver cannot be registered
PM / hibernate: Move software_resume to late_initcall_sync
intel_pstate: Correct calculation of min pstate value
intel_pstate: Improve accuracy by not truncating until final result
Linus Torvalds [Fri, 25 Oct 2013 19:15:13 +0000 (20:15 +0100)]
Merge tag 'for-linus-
20131025' of git://git.infradead.org/linux-mtd
Pull final mtd fixes from Brian Norris:
"A few more last-minute regression fixes, prepared jointly by me and
David Woodhouse:
- Revert pxa3xx to its old name to avoid breaking existing
'mtdparts=' boot strings.
- Return GPMI NAND to its legacy ECC layout for backwards
compatibility. We will revisit this in 3.13.
A note from David on the latter fix: 'This leaves a harmless cosmetic
warning about an unused function. At this point in the cycle I really
don't care.'"
* tag 'for-linus-
20131025' of git://git.infradead.org/linux-mtd:
mtd: gpmi: fix ECC regression
mtd: nand: pxa3xx: Fix registered MTD name
Nicholas Bellinger [Fri, 25 Oct 2013 17:44:15 +0000 (10:44 -0700)]
vhost/scsi: Fix incorrect usage of get_user_pages_fast write parameter
This patch addresses a long-standing bug where the get_user_pages_fast()
write parameter used for setting the underlying page table entry permission
bits was incorrectly set to write=1 for data_direction=DMA_TO_DEVICE, and
passed into get_user_pages_fast() via vhost_scsi_map_iov_to_sgl().
However, this parameter is intended to signal WRITEs to pinned userspace
PTEs for the virtio-scsi DMA_FROM_DEVICE -> READ payload case, and *not*
for the virtio-scsi DMA_TO_DEVICE -> WRITE payload case.
This bug would manifest itself as random process segmentation faults on
KVM host after repeated vhost starts + stops and/or with lots of vhost
endpoints + LUNs.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Asias He <asias@redhat.com>
Cc: <stable@vger.kernel.org> # 3.6+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Wei Yongjun [Fri, 25 Oct 2013 13:53:33 +0000 (21:53 +0800)]
target/pscsi: fix return value check
In case of error, the function scsi_host_lookup() returns NULL
pointer not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Linus Torvalds [Fri, 25 Oct 2013 17:16:47 +0000 (18:16 +0100)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
Pull vfs fixes (try two) from Al Viro:
"nfsd performance regression fix + seq_file lseek(2) fix"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
seq_file: always update file->f_pos in seq_lseek()
nfsd regression since delayed fput()
David Woodhouse [Fri, 25 Oct 2013 14:03:59 +0000 (15:03 +0100)]
mtd: gpmi: fix ECC regression
The "legacy" ECC layout used until 3.12-rc1 uses all the OOB area by
computing the ECC strength and ECC step size ourselves.
Commit
2febcdf84b ("mtd: gpmi: set the BCHs geometry with the ecc info")
makes the driver use the ECC info (ECC strength and ECC step size)
provided by the MTD code, and creates a different NAND ECC layout
for the BCH, and use the new ECC layout. This causes a regression:
We can not mount the ubifs which was created by the old NAND ECC layout.
This patch fixes this issue by reverting to the legacy ECC layout.
We will probably introduce a new device-tree property to indicate that
the new ECC layout can be used. For now though, for the imminent 3.12
release, we just unconditionally revert to the 3.11 behaviour.
This leaves a harmless cosmetic warning about an unused function. At
this point in the cycle I really don't care.
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Huang Shijie <b32955@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Gu Zheng [Fri, 25 Oct 2013 10:15:06 +0000 (18:15 +0800)]
seq_file: always update file->f_pos in seq_lseek()
This issue was first pointed out by Jiaxing Wang several months ago, but no
further comments:
https://lkml.org/lkml/2013/6/29/41
As we know pread() does not change f_pos, so after pread(), file->f_pos
and m->read_pos become different. And seq_lseek() does not update file->f_pos
if offset equals to m->read_pos, so after pread() and seq_lseek()(lseek to
m->read_pos), then a subsequent read may read from a wrong position, the
following program produces the problem:
char str1[32] = { 0 };
char str2[32] = { 0 };
int poffset = 10;
int count = 20;
/*open any seq file*/
int fd = open("/proc/modules", O_RDONLY);
pread(fd, str1, count, poffset);
printf("pread:%s\n", str1);
/*seek to where m->read_pos is*/
lseek(fd, poffset+count, SEEK_SET);
/*supposed to read from poffset+count, but this read from position 0*/
read(fd, str2, count);
printf("read:%s\n", str2);
out put:
pread:
ck_netbios_ns 12665
read:
nf_conntrack_netbios
/proc/modules:
nf_conntrack_netbios_ns 12665 0 - Live 0xffffffffa038b000
nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns, Live 0xffffffffa0386000
So we always update file->f_pos to offset in seq_lseek() to fix this issue.
Signed-off-by: Jiaxing Wang <hello.wjx@gmail.com>
Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Rafael J. Wysocki [Fri, 25 Oct 2013 14:22:47 +0000 (16:22 +0200)]
acpi-cpufreq: Fail initialization if driver cannot be registered
Make acpi_cpufreq_init() return error codes when the driver cannot be
registered so that the module doesn't stay useless in memory and so
that acpi_cpufreq_exit() doesn't attempt to unregister things that
have never been registered when the module is unloaded.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Linus Torvalds [Fri, 25 Oct 2013 10:49:23 +0000 (11:49 +0100)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"There's really only one bugfix in this branch, which is a fix for
timers on the integrator platform. Since Linus Walleij is
resurrecting support for the platform it seems valuable to get the fix
into 3.12 even though the regression has been around a while.
The rest are a handful of maintainers updates. If you prefer to hold
those until 3.13 then just merge the first patch on the branch which
is the fix"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
MAINTAINERS: Add maintainers entry for Rockchip SoCs
MAINTAINERS: Tegra updates, and driver ownership
MAINTAINERS: ARM: mvebu: add Sebastian Hesselbarth
ARM: integrator: deactivate timer0 on the Integrator/CP
Linus Torvalds [Fri, 25 Oct 2013 06:32:01 +0000 (07:32 +0100)]
Merge tag 'ecryptfs-3.12-rc7-fixes' of git://git./linux/kernel/git/tyhicks/ecryptfs
Pull ecryptfs fixes from Tyler Hicks:
"Two important fixes
- Fix long standing memory leak in the (rarely used) public key
support
- Fix large file corruption on 32 bit architectures"
* tag 'ecryptfs-3.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs:
eCryptfs: fix 32 bit corruption issue
ecryptfs: Fix memory leakage in keystore.c
Russ Dill [Thu, 24 Oct 2013 13:25:26 +0000 (14:25 +0100)]
PM / hibernate: Move software_resume to late_initcall_sync
software_resume is being called after deferred_probe_initcall in
drivers base. If the probing of the device that contains the resume
image is deferred, and the system has been instructed to wait for
it to show up, this wait will occur in software_resume. This causes
a deadlock.
Move software_resume into late_initcall_sync so that it happens
after all the other late_initcalls.
Signed-off-by: Russ Dill <Russ.Dill@ti.com>
Acked-by: Pavel Machek <Pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Ezequiel Garcia [Sat, 19 Oct 2013 21:19:25 +0000 (18:19 -0300)]
mtd: nand: pxa3xx: Fix registered MTD name
In a recent commit:
commit
f455578dd961087a5cf94730d9f6489bb1d355f0
Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Date: Mon Aug 12 14:14:53 2013 -0300
mtd: nand: pxa3xx: Remove hardcoded mtd name
There's no advantage in using a hardcoded name for the mtd device.
Instead use the provided by the platform_device.
The MTD name was changed to use the one provided by the platform_device.
However, this can be problematic as some users want to set partitions
using the kernel parameter 'mtdparts', where the name is needed.
Therefore, to avoid regressions in users relying in 'mtdparts' we revert
the change and use the previous one 'pxa3xx_nand-0'.
While at it, let's put a big comment and prevent this change from happening
ever again.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Colin Ian King [Thu, 24 Oct 2013 14:08:07 +0000 (14:08 +0000)]
eCryptfs: fix 32 bit corruption issue
Shifting page->index on 32 bit systems was overflowing, causing
data corruption of > 4GB files. Fix this by casting it first.
https://launchpad.net/bugs/
1243636
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reported-by: Lars Duesing <lars.duesing@camelotsweb.de>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Vinod Koul [Thu, 24 Oct 2013 16:47:50 +0000 (22:17 +0530)]
dmaengine: edma: fix another memory leak
commit
4b6271a6 fix a menory leak but one more existed in driver so fix that
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Valentin Ilie [Thu, 24 Oct 2013 13:14:22 +0000 (16:14 +0300)]
dma: edma: Fix memory leak
When it fails to allocate a slot, edesc should be free'd before return;
Signed-off-by: Valentin Ilie <valentin.ilie@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Joseph Schuchart [Thu, 24 Oct 2013 13:10:51 +0000 (10:10 -0300)]
perf script python: Fix mem leak due to missing Py_DECREFs on dict entries
We are using the Python scripting interface in perf to extract kernel
events relevant for performance analysis of HPC codes. We noticed that
the "perf script" call allocates a significant amount of memory (in the
order of several 100 MiB) during it's run, e.g. 125 MiB for a 25 MiB
input file:
$> perf record -o perf.data -a -R -g fp \
-e power:cpu_frequency -e sched:sched_switch \
-e sched:sched_migrate_task -e sched:sched_process_exit \
-e sched:sched_process_fork -e sched:sched_process_exec \
-e cycles -m 4096 --freq 4000
$> /usr/bin/time perf script -i perf.data -s dummy_script.py
0.84user 0.13system 0:01.92elapsed 51%CPU (0avgtext+0avgdata
125532maxresident)k
73072inputs+0outputs (57major+33086minor)pagefaults 0swaps
Upon further investigation using the valgrind massif tool, we noticed
that Python objects that are created in trace-event-python.c via
PyString_FromString*() (and their Integer and Long counterparts) are
never free'd.
The reason for this seem to be missing Py_DECREF calls on the objects
that are returned by these functions and stored in the Python
dictionaries. The Python dictionaries do not steal references (as
opposed to Python tuples and lists) but instead add their own reference.
Hence, the reference that is returned by these object creation functions
is never released and the memory is leaked. (see [1,2])
The attached patch fixes this by wrapping all relevant calls to
PyDict_SetItemString() and decrementing the reference counter
immediately after the Python function call.
This reduces the allocated memory to a reasonable amount:
$> /usr/bin/time perf script -i perf.data -s dummy_script.py
0.73user 0.05system 0:00.79elapsed 99%CPU (0avgtext+0avgdata
49132maxresident)k
0inputs+0outputs (0major+14045minor)pagefaults 0swaps
For comparison, with a 120 MiB input file the memory consumption
reported by time drops from almost 600 MiB to 146 MiB.
The patch has been tested using Linux 3.8.2 with Python 2.7.4 and Linux
3.11.6 with Python 2.7.5.
Please let me know if you need any further information.
[1] http://docs.python.org/2/c-api/tuple.html#PyTuple_SetItem
[2] http://docs.python.org/2/c-api/dict.html#PyDict_SetItemString
Signed-off-by: Joseph Schuchart <joseph.schuchart@tu-dresden.de>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lkml.kernel.org/r/1381468543-25334-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Nicholas Bellinger [Thu, 24 Oct 2013 07:27:00 +0000 (00:27 -0700)]
target: Fail XCOPY for non matching source + destination block_size
This patch adds an explicit check + failure for XCOPY I/O to source +
destination devices with a non-matching block_size.
This limitiation is currently due to the fact that the scatterlist
memory allocated for the XCOPY READ operation is passed zero-copy
to the XCOPY WRITE operation.
Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Reported-by: Douglas Gilbert <dgilbert@interlog.com>
Cc: Thomas Glanzmann <thomas@glanzmann.de>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Thu, 24 Oct 2013 07:15:27 +0000 (00:15 -0700)]
target: Generate failure for XCOPY I/O with non-zero scsi_status
This patch adds the missing non-zero se_cmd->scsi_status check required
for local XCOPY I/O within target_xcopy_issue_pt_cmd() to signal an
exception case failure.
This will trigger the generation of SAM_STAT_CHECK_CONDITION status
from within target_xcopy_do_work() process context code.
Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Reported-by: Douglas Gilbert <dgilbert@interlog.com>
Cc: Thomas Glanzmann <thomas@glanzmann.de>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Nicholas Bellinger [Thu, 24 Oct 2013 07:10:36 +0000 (00:10 -0700)]
target: Add missing XCOPY I/O operation sense_buffer
This patch adds the missing xcopy_pt_cmd->sense_buffer[] required for
correctly handling CHECK_CONDITION exceptions within the locally
generated XCOPY I/O path.
Also update target_xcopy_read_source() + target_xcopy_setup_pt_cmd()
to pass this buffer into transport_init_se_cmd() to correctly setup
se_cmd->sense_buffer.
Reported-by: Thomas Glanzmann <thomas@glanzmann.de>
Reported-by: Douglas Gilbert <dgilbert@interlog.com>
Cc: Thomas Glanzmann <thomas@glanzmann.de>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Ingo Molnar [Thu, 24 Oct 2013 06:48:11 +0000 (08:48 +0200)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
* Show progress on histogram collapsing, that can take a long time, from
Namhyung Kim.
* Support "$vars" meta argument syntax for local variables, allowing
asking for all possible variables at a given probe point to be
collected when it hits, from Masami Hiramatsu.
* Address the root cause of that 'perf sched' stack initialization build
slowdown, by programmatically setting a big array after moving the
global variable back to the stack. Fix from Adrian Hunter.
* Do not repipe attributes to a perf.data file in 'perf inject',
fix from Adrian Hunter
* Change the procps visible command-name of invididual benchmark tests
plus cleanups, from Ingo Molnar.
* Do not accept parse_tag_value() overflow, fix from Adrian Hunter.
* Validate that mmap_pages is not too big. From Adrian Hunter.
* Fix non-debug build, from Adrian Hunter.
* Clarify the "sample parsing" test entry, from Arnaldo Carvalho de Melo.
* Consider PERF_SAMPLE_TRANSACTION in the "sample parsing" test,
from Arnaldo Carvalho de Melo.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Thu, 24 Oct 2013 06:45:34 +0000 (07:45 +0100)]
Merge tag 'md/3.12-fixes' of git://neil.brown.name/md
Pull md bugfixes from Neil Brown:
"Assorted md bug-fixes for 3.12.
All tagged for -stable releases too"
* tag 'md/3.12-fixes' of git://neil.brown.name/md:
raid5: avoid finding "discard" stripe
raid5: set bio bi_vcnt 0 for discard request
md: avoid deadlock when md_set_badblocks.
md: Fix skipping recovery for read-only arrays.
Linus Torvalds [Thu, 24 Oct 2013 06:44:47 +0000 (07:44 +0100)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of two fixes which cause oopses (Buslogic, qla2xxx) and
one fix which may cause a hang because of request miscounting (sd)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] sd: call blk_pm_runtime_init before add_disk
[SCSI] qla2xxx: Fix request queue null dereference.
[SCSI] BusLogic: Fix an oops when intializing multimaster adapter
Vu Pham [Mon, 21 Oct 2013 21:48:54 +0000 (00:48 +0300)]
iser-target: check device before dereferencing its variable
This patch changes isert_connect_release() to correctly check for
the existence struct isert_device *device before checking for
isert_device->use_frwr.
Signed-off-by: Vu Pham <vu@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Shaohua Li [Sat, 19 Oct 2013 06:51:42 +0000 (14:51 +0800)]
raid5: avoid finding "discard" stripe
SCSI discard will damage discard stripe bio setting, eg, some fields are
changed. If the stripe is reused very soon, we have wrong bios setting. We
remove discard stripe from hash list, so next time the strip will be fully
initialized.
Suitable for backport to 3.7+.
Cc: <stable@vger.kernel.org> (3.7+)
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Shaohua Li [Sat, 19 Oct 2013 06:50:28 +0000 (14:50 +0800)]
raid5: set bio bi_vcnt 0 for discard request
SCSI layer will add new payload for discard request. If two bios are merged
to one, the second bio has bi_vcnt 1 which is set in raid5. This will confuse
SCSI and cause oops.
Suitable for backport to 3.7+
Cc: stable@vger.kernel.org (v3.7+)
Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Bian Yu [Sat, 12 Oct 2013 05:10:03 +0000 (01:10 -0400)]
md: avoid deadlock when md_set_badblocks.
When operate harddisk and hit errors, md_set_badblocks is called after
scsi_restart_operations which already disabled the irq. but md_set_badblocks
will call write_sequnlock_irq and enable irq. so softirq can preempt the
current thread and that may cause a deadlock. I think this situation should
use write_sequnlock_irqsave/irqrestore instead.
I met the situation and the call trace is below:
[ 638.919974] BUG: spinlock recursion on CPU#0, scsi_eh_13/1010
[ 638.921923] lock: 0xffff8800d4d51fc8, .magic:
dead4ead, .owner: scsi_eh_13/1010, .owner_cpu: 0
[ 638.923890] CPU: 0 PID: 1010 Comm: scsi_eh_13 Not tainted 3.12.0-rc5+ #37
[ 638.925844] Hardware name: To be filled by O.E.M. To be filled by O.E.M./MAHOBAY, BIOS 4.6.5 03/05/2013
[ 638.927816]
ffff880037ad4640 ffff880118c03d50 ffffffff8172ff85 0000000000000007
[ 638.929829]
ffff8800d4d51fc8 ffff880118c03d70 ffffffff81730030 ffff8800d4d51fc8
[ 638.931848]
ffffffff81a72eb0 ffff880118c03d90 ffffffff81730056 ffff8800d4d51fc8
[ 638.933884] Call Trace:
[ 638.935867] <IRQ> [<
ffffffff8172ff85>] dump_stack+0x55/0x76
[ 638.937878] [<
ffffffff81730030>] spin_dump+0x8a/0x8f
[ 638.939861] [<
ffffffff81730056>] spin_bug+0x21/0x26
[ 638.941836] [<
ffffffff81336de4>] do_raw_spin_lock+0xa4/0xc0
[ 638.943801] [<
ffffffff8173f036>] _raw_spin_lock+0x66/0x80
[ 638.945747] [<
ffffffff814a73ed>] ? scsi_device_unbusy+0x9d/0xd0
[ 638.947672] [<
ffffffff8173fb1b>] ? _raw_spin_unlock+0x2b/0x50
[ 638.949595] [<
ffffffff814a73ed>] scsi_device_unbusy+0x9d/0xd0
[ 638.951504] [<
ffffffff8149ec47>] scsi_finish_command+0x37/0xe0
[ 638.953388] [<
ffffffff814a75e8>] scsi_softirq_done+0xa8/0x140
[ 638.955248] [<
ffffffff8130e32b>] blk_done_softirq+0x7b/0x90
[ 638.957116] [<
ffffffff8104fddd>] __do_softirq+0xfd/0x330
[ 638.958987] [<
ffffffff810b964f>] ? __lock_release+0x6f/0x100
[ 638.960861] [<
ffffffff8174a5cc>] call_softirq+0x1c/0x30
[ 638.962724] [<
ffffffff81004c7d>] do_softirq+0x8d/0xc0
[ 638.964565] [<
ffffffff8105024e>] irq_exit+0x10e/0x150
[ 638.966390] [<
ffffffff8174ad4a>] smp_apic_timer_interrupt+0x4a/0x60
[ 638.968223] [<
ffffffff817499af>] apic_timer_interrupt+0x6f/0x80
[ 638.970079] <EOI> [<
ffffffff810b964f>] ? __lock_release+0x6f/0x100
[ 638.971899] [<
ffffffff8173fa6a>] ? _raw_spin_unlock_irq+0x3a/0x50
[ 638.973691] [<
ffffffff8173fa60>] ? _raw_spin_unlock_irq+0x30/0x50
[ 638.975475] [<
ffffffff81562393>] md_set_badblocks+0x1f3/0x4a0
[ 638.977243] [<
ffffffff81566e07>] rdev_set_badblocks+0x27/0x80
[ 638.978988] [<
ffffffffa00d97bb>] raid5_end_read_request+0x36b/0x4e0 [raid456]
[ 638.980723] [<
ffffffff811b5a1d>] bio_endio+0x1d/0x40
[ 638.982463] [<
ffffffff81304ff3>] req_bio_endio.isra.65+0x83/0xa0
[ 638.984214] [<
ffffffff81306b9f>] blk_update_request+0x7f/0x350
[ 638.985967] [<
ffffffff81306ea1>] blk_update_bidi_request+0x31/0x90
[ 638.987710] [<
ffffffff813085e0>] __blk_end_bidi_request+0x20/0x50
[ 638.989439] [<
ffffffff8130862f>] __blk_end_request_all+0x1f/0x30
[ 638.991149] [<
ffffffff81308746>] blk_peek_request+0x106/0x250
[ 638.992861] [<
ffffffff814a62a9>] ? scsi_kill_request.isra.32+0xe9/0x130
[ 638.994561] [<
ffffffff814a633a>] scsi_request_fn+0x4a/0x3d0
[ 638.996251] [<
ffffffff813040a7>] __blk_run_queue+0x37/0x50
[ 638.997900] [<
ffffffff813045af>] blk_run_queue+0x2f/0x50
[ 638.999553] [<
ffffffff814a5750>] scsi_run_queue+0xe0/0x1c0
[ 639.001185] [<
ffffffff814a7721>] scsi_run_host_queues+0x21/0x40
[ 639.002798] [<
ffffffff814a2e87>] scsi_restart_operations+0x177/0x200
[ 639.004391] [<
ffffffff814a4fe9>] scsi_error_handler+0xc9/0xe0
[ 639.005996] [<
ffffffff814a4f20>] ? scsi_unjam_host+0xd0/0xd0
[ 639.007600] [<
ffffffff81072f6b>] kthread+0xdb/0xe0
[ 639.009205] [<
ffffffff81072e90>] ? flush_kthread_worker+0x170/0x170
[ 639.010821] [<
ffffffff81748cac>] ret_from_fork+0x7c/0xb0
[ 639.012437] [<
ffffffff81072e90>] ? flush_kthread_worker+0x170/0x170
This bug was introduce in commit
2e8ac30312973dd20e68073653
(the first time rdev_set_badblock was call from interrupt context),
so this patch is appropriate for 3.5 and subsequent kernels.
Cc: <stable@vger.kernel.org> (3.5+)
Signed-off-by: Bian Yu <bianyu@kedacom.com>
Reviewed-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Lukasz Dorau [Thu, 24 Oct 2013 01:55:17 +0000 (12:55 +1100)]
md: Fix skipping recovery for read-only arrays.
Since:
commit
7ceb17e87bde79d285a8b988cfed9eaeebe60b86
md: Allow devices to be re-added to a read-only array.
spares are activated on a read-only array. In case of raid1 and raid10
personalities it causes that not-in-sync devices are marked in-sync
without checking if recovery has been finished.
If a read-only array is degraded and one of its devices is not in-sync
(because the array has been only partially recovered) recovery will be skipped.
This patch adds checking if recovery has been finished before marking a device
in-sync for raid1 and raid10 personalities. In case of raid5 personality
such condition is already present (at raid5.c:6029).
Bug was introduced in 3.10 and causes data corruption.
Cc: stable@vger.kernel.org
Signed-off-by: Pawel Baldysiak <pawel.baldysiak@intel.com>
Signed-off-by: Lukasz Dorau <lukasz.dorau@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Namhyung Kim [Fri, 11 Oct 2013 05:15:38 +0000 (14:15 +0900)]
perf tools: Show progress on histogram collapsing
It can take quite amount of time so add progress bar UI to inform user.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1381468543-25334-4-git-send-email-namhyung@kernel.org
[ perf_progress -> ui_progress ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 23 Oct 2013 18:40:38 +0000 (15:40 -0300)]
perf ui progress: Per progress bar state
That will ease using a progress bar across multiple functions, like in
the upcoming patches that will present a progress bar when collapsing
histograms.
Based on a previous patch by Namhyung Kim.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cr7lq7ud9fj21bg7wvq27w1u@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 23 Oct 2013 17:08:48 +0000 (14:08 -0300)]
perf ui: Rename ui_progress to ui_progress_ops
Reserving 'struct ui_progress' to the per progress instances, not to the
particular set of operations used to implmenet a progress bar in the
current UI (GTK, TUI, etc).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zjqbfp9gx3yo45s0rp9uv42n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Dave Jiang [Tue, 22 Oct 2013 22:29:20 +0000 (15:29 -0700)]
MAINTAINERS: add to ioatdma maintainer list
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[djbw: add dmaengine list]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Vinod Koul [Tue, 22 Oct 2013 07:28:56 +0000 (12:58 +0530)]
MAINTAINERS: add the new dmaengine mailing list
We have a new mailing list hosted by vger for dmaengine
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Adrian Hunter [Tue, 22 Oct 2013 07:34:05 +0000 (10:34 +0300)]
perf tools: Fix non-debug build
In the absence of s DEBUG variable definition on the command line perf
tools was building without optimization. Fix by assigning DEBUG if it
is not defined.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1382427258-17495-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 22 Oct 2013 07:34:18 +0000 (10:34 +0300)]
perf evlist: Validate that mmap_pages is not too big
Amend perf_evlist__parse_mmap_pages() to check that the mmap_pages
entered via the --mmap_pages/-m option is not too big.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1382427258-17495-15-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 22 Oct 2013 07:34:17 +0000 (10:34 +0300)]
perf tools: Do not accept parse_tag_value() overflow
parse_tag_value() accepts an "unsigned long" and multiplies it according
to a tag character. Do not accept the value if the multiplication
overflows.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1382427258-17495-14-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 22 Oct 2013 07:34:09 +0000 (10:34 +0300)]
perf inject: Do not repipe attributes to a perf.data file
perf.data files contain the attributes separately, do not put them in
the event stream as well.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1382427258-17495-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 22 Oct 2013 07:34:07 +0000 (10:34 +0300)]
perf script: Make perf_script a local variable
Change perf_script from being global to being local.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1382427258-17495-4-git-send-email-adrian.hunter@intel.com
[ Made the minor consistency changes suggested by David Ahern ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 22 Oct 2013 07:34:16 +0000 (10:34 +0300)]
perf sched: Optimize build time
builtin-sched.c took a log time to build with -O6 optimization. This
turned out to be caused by:
.curr_pid = { [0 ... MAX_CPUS - 1] = -1 },
Fix by initializing curr_pid programmatically.
This addresses the problem cured in
f36f83f947ed using a smaller hammer.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1382427258-17495-13-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 22 Oct 2013 07:34:15 +0000 (10:34 +0300)]
perf sched: Make struct perf_sched sched a local variable
Change "struct perf_sched sched" from being global to being local.
The build slowdown cured by
f36f83f947ed is dealt with in the following
patch, by programatically setting perf_sched.curr_pid.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1382427258-17495-12-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Aaron Lu [Thu, 10 Oct 2013 05:22:36 +0000 (13:22 +0800)]
[SCSI] sd: call blk_pm_runtime_init before add_disk
Sujit has found a race condition that would make q->nr_pending
unbalanced, it occurs as Sujit explained:
"
sd_probe_async() ->
add_disk() ->
disk_add_event() ->
schedule(disk_events_workfn)
sd_revalidate_disk()
blk_pm_runtime_init()
return;
Let's say the disk_events_workfn() calls sd_check_events() which tries
to send test_unit_ready() and because of sd_revalidate_disk() trying to
send another commands the test_unit_ready() might be re-queued as the
tagged command queuing is disabled.
So the race condition is -
Thread 1 | Thread 2
sd_revalidate_disk() | sd_check_events()
...nr_pending = 0 as q->dev = NULL| scsi_queue_insert()
blk_runtime_pm_init() | blk_pm_requeue_request() ->
| nr_pending = -1 since
| q->dev != NULL
"
The problem is, the test_unit_ready request doesn't get counted the
first time it is queued, so the later decrement of q->nr_pending in
blk_pm_requeue_request makes it unbalanced.
Fix this by calling blk_pm_runtime_init before add_disk so that all
requests initiated there will all be counted.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Reported-and-tested-by: Sujit Reddy Thumma <sthumma@codeaurora.org>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Chad Dupuis [Thu, 3 Oct 2013 07:21:13 +0000 (03:21 -0400)]
[SCSI] qla2xxx: Fix request queue null dereference.
If an invalid IOCB is returned on the response queue then the index into the
request queue map could be invalid and could return to us a bogus value. This
could cause us to try to deference an invalid pointer and cause an exception.
If we encounter this condition, simply return as no context can be established
for this response.
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Ingo Molnar [Wed, 23 Oct 2013 12:37:56 +0000 (14:37 +0200)]
perf bench: Change the procps visible command-name of invididual benchmark tests plus cleanups
Before this patch, looking at 'perf bench sched pipe' behavior over
'top' only told us that something related to perf is running:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
19934 mingo 20 0 54836 1296 952 R 18.6 0.0 0:00.56 perf
19935 mingo 20 0 54836 384 36 S 18.6 0.0 0:00.56 perf
After the patch it's clearly visible what's going on:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
19744 mingo 20 0 125m 3536 2644 R 68.2 0.0 0:01.12 sched-pipe
19745 mingo 20 0 125m 1172 276 R 68.2 0.0 0:01.12 sched-pipe
The benchmark-subsystem name is concatenated with the individual
testcase name.
Unfortunately 'perf top' does not show the reconfigured name, possibly
because it caches ->comm[] values and does not recognize changes to
them?
Also clean up a few bits in builtin-bench.c while at it and reorganize
the code and the output strings to be consistent.
Use iterators to access the various arrays. Rename 'suites' concept to
'benchmark collection' and the 'bench_suite' to 'benchmark/bench'. The
many repetitions of 'suite' made the code harder to read and understand.
The new output is:
comet:~/tip/tools/perf> ./perf bench
Usage:
perf bench [<common options>] <collection> <benchmark> [<options>]
# List of all available benchmark collections:
sched: Scheduler and IPC benchmarks
mem: Memory access benchmarks
numa: NUMA scheduling and MM benchmarks
all: All benchmarks
comet:~/tip/tools/perf> ./perf bench sched
# List of available benchmarks for collection 'sched':
messaging: Benchmark for scheduling and IPC
pipe: Benchmark for pipe() between two processes
all: Test all scheduler benchmarks
comet:~/tip/tools/perf> ./perf bench mem
# List of available benchmarks for collection 'mem':
memcpy: Benchmark for memcpy()
memset: Benchmark for memset() tests
all: Test all memory benchmarks
comet:~/tip/tools/perf> ./perf bench numa
# List of available benchmarks for collection 'numa':
mem: Benchmark for NUMA workloads
all: Test all NUMA benchmarks
Individual benchmark modules were not touched.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20131023123756.GA17871@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Fri, 11 Oct 2013 07:10:26 +0000 (16:10 +0900)]
perf probe: Find fentry mcount fuzzed parameter location
At this point, --fentry (mcount function entry) option for gcc fuzzes
the debuginfo variable locations by skipping the mcount instruction
offset (on x86, this is a 5 byte call instruction).
This makes variable searching fail at the entry of functions which
are mcount'ed.
e.g.)
Available variables at vfs_read
@<vfs_read+0>
(No matched variables)
This patch adds additional location search at the function entry point
to solve this issue, which tries to find the earliest address for the
variable location.
Note that this only works with function parameters (formal parameters)
because any local variables should not exist on the function entry
address (those are not initialized yet).
With this patch, perf probe shows correct parameters if possible;
# perf probe --vars vfs_read
Available variables at vfs_read
@<vfs_read+0>
char* buf
loff_t* pos
size_t count
struct file* file
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20131011071025.15557.13275.stgit@udc4-manage.rcp.hitachi.co.jp
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Masami Hiramatsu [Fri, 11 Oct 2013 07:10:23 +0000 (16:10 +0900)]
perf probe: Support "$vars" meta argument syntax for local variables
Support "$vars" meta argument syntax for tracing all local variables at
probe point.
Now you can trace all available local variables (including function
parameters) at the probe point by passing $vars.
# perf probe --add foo $vars
This automatically finds all local variables at foo() and adds it as
probe arguments.
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20131011071023.15557.51770.stgit@udc4-manage.rcp.hitachi.co.jp
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 22 Oct 2013 22:01:31 +0000 (19:01 -0300)]
perf tools: Stop using 'self' in some more places
As suggested by tglx, 'self' should be replaced by something that is
more useful.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-fmblhc6tbb99tk1q8vowtsbj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 22 Oct 2013 18:28:11 +0000 (15:28 -0300)]
perf test: Consider PERF_SAMPLE_TRANSACTION in the "sample parsing" test
[root@sandy ~]# perf test -v 22
22: Test sample parsing :
--- start ---
sample format has changed, some new PERF_SAMPLE_ bit was introduced - test needs updating
---- end ----
Test sample parsing: FAILED!
[root@sandy ~]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-cx83wuzz30m10m4s1xt0ocyq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Tue, 22 Oct 2013 18:24:58 +0000 (15:24 -0300)]
perf test: Clarify the "sample parsing" test entry
Before:
[root@sandy ~]# perf test -v 22
22: Test sample parsing :
--- start ---
sample format has changed - test needs updating
---- end ----
Test sample parsing: FAILED!
[root@sandy ~]#
After:
[root@sandy ~]# perf test -v 22
22: Test sample parsing :
--- start ---
sample format has changed, some new PERF_SAMPLE_ bit was introduced - test needs updating
---- end ----
Test sample parsing: FAILED!
[root@sandy ~]#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-8cazc2fpmk70jcbww8c0cobx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Thomas Gleixner [Tue, 24 Sep 2013 19:50:23 +0000 (21:50 +0200)]
clockevents: Sanitize ticks to nsec conversion
Marc Kleine-Budde pointed out, that commit
77cc982 "clocksource: use
clockevents_config_and_register() where possible" caused a regression
for some of the converted subarchs.
The reason is, that the clockevents core code converts the minimal
hardware tick delta to a nanosecond value for core internal
usage. This conversion is affected by integer math rounding loss, so
the backwards conversion to hardware ticks will likely result in a
value which is less than the configured hardware limitation. The
affected subarchs used their own workaround (SIGH!) which got lost in
the conversion.
The solution for the issue at hand is simple: adding evt->mult - 1 to
the shifted value before the integer divison in the core conversion
function takes care of it. But this only works for the case where for
the scaled math mult/shift pair "mult <= 1 << shift" is true. For the
case where "mult > 1 << shift" we can apply the rounding add only for
the minimum delta value to make sure that the backward conversion is
not less than the given hardware limit. For the upper bound we need to
omit the rounding add, because the backwards conversion is always
larger than the original latch value. That would violate the upper
bound of the hardware device.
Though looking closer at the details of that function reveals another
bogosity: The upper bounds check is broken as well. Checking for a
resulting "clc" value greater than KTIME_MAX after the conversion is
pointless. The conversion does:
u64 clc = (latch << evt->shift) / evt->mult;
So there is no sanity check for (latch << evt->shift) exceeding the
64bit boundary. The latch argument is "unsigned long", so on a 64bit
arch the handed in argument could easily lead to an unnoticed shift
overflow. With the above rounding fix applied the calculation before
the divison is:
u64 clc = (latch << evt->shift) + evt->mult - 1;
So we need to make sure, that neither the shift nor the rounding add
is overflowing the u64 boundary.
[ukl: move assignment to rnd after eventually changing mult, fix build
issue and correct comment with the right math]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: nicolas.ferre@atmel.com
Cc: Marc Pignat <marc.pignat@hevs.ch>
Cc: john.stultz@linaro.org
Cc: kernel@pengutronix.de
Cc: Ronald Wahl <ronald.wahl@raritan.com>
Cc: LAK <linux-arm-kernel@lists.infradead.org>
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1380052223-24139-1-git-send-email-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Ingo Molnar [Wed, 23 Oct 2013 07:45:50 +0000 (09:45 +0200)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
* Convert callchain children list to rbtree, greatly reducing the time
taken for callchain processing, from Namhyung Kim.
* Add --max-stack option to limit callchain stack scan in 'top' and 'report',
improving callchain processing when reducing the stack depth is an option,
from Waiman Long.
* Compare dso's also when comparing symbols, to avoid grouping together
symbols with the same name but on different DSOs, fix from Namhyung Kim.
* 'perf trace' now can can use a 'perf probe' wannabe tracepoint to hook into
the userspace -> kernel pathname copy so that it can map fds to pathnames
without reading /proc/pid/fd/ symlinks. From Arnaldo Carvalho de Melo.
* 'perf trace' now emits hints as to why tracing is not possible, helping the
user to setup the system to allow tracing in the desired permission
granularity, telling if the problem is due to debugfs not being mounted or
with not enough permission for !root, /proc/sys/kernel/perf_event_paranoit
value, etc. From Arnaldo Carvalho de Melo.
* Add missing 'mmap2' in evsel debug print, from Adrian Hunter.
* Add missing decrement in id sample parsing, not a fix per se, just to
avoid a problem whem somebody adds another field, from Adrian Hunter.
* Improve write_output error message in 'perf record', from Adrian Hunter.
* Add missing sample flush for piped events, fix from Adrian Hunter.
* Add missing members to perf_event__attr_swap(), fix from Adrian Hunter.
* Assorted fixes for 32-bit build, from Adrian Hunter
* Print addr by default for BTS in 'perf script', from Adrian Juntmer
* Separating data file properties from session, code reorganization from
Jiri Olsa.
* Show error in 'perf list' if tracepoints not available, from Pekka Enberg.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Wed, 23 Oct 2013 07:10:25 +0000 (08:10 +0100)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Several last minute bug fixes.
Two of them are on the larger side for rc7, the dasd format patch for
older storage devices and the store-clock-fast patch where we have
been to optimistic with an optimization"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/time: correct use of store clock fast
s390/vmlogrdr: fix array access in vmlogrdr_open()
s390/compat,signal: fix return value of copy_siginfo_(to|from)_user32()
s390/dasd: check for availability of prefix command during format
s390/mm,kvm: fix software dirty bits vs. kvm for old machines
Linus Torvalds [Wed, 23 Oct 2013 06:58:22 +0000 (07:58 +0100)]
Merge branch 'for-rc' of git://git./linux/kernel/git/rzhang/linux
Pull thermal management fixes from Zhang Rui:
"These includes several commits that are necessary to properly fix
regression for TMU test MUX address setting after reset, for exynos
thermal driver.
Specifics:
- fix a regression that the removal of setting a certain field at TMU
configuration setting results in immediately shutdown after reset
on Exynos4412 SoC.
- revert a patch which tries to link the thermal_zone device and its
hwmon node but breaks libsensors.
- fix a deadlock/lockdep warning issue in x86_pkg_temp thermal
driver, which can be reproduced on a buggy platform only.
- fix ti-soc-thermal driver to fall back on bandgap reading when
reading from PCB temperature sensor fails"
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
Revert "drivers: thermal: parent virtual hwmon with thermal zone"
drivers: thermal: allow ti-soc-thermal run without pcb zone
thermal: exynos: Provide initial setting for TMU's test MUX address at Exynos4412
thermal: exynos: Provide separate TMU data for Exynos4412
thermal: exynos: Remove check for thermal device pointer at exynos_report_trigger()
Thermal: x86_pkg_temp: change spin lock
Randy Dunlap [Mon, 16 Sep 2013 18:10:51 +0000 (11:10 -0700)]
platform/x86: fix asus-wmi build error
Fix build error in asus_wmi.c when ASUS_WMI=y and ACPI_VIDEO=m
by preventing that combination.
drivers/built-in.o: In function `asus_wmi_probe':
asus-wmi.c:(.text+0x65ddb4): undefined reference to `acpi_video_unregister'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kent Overstreet [Tue, 22 Oct 2013 22:35:50 +0000 (15:35 -0700)]
bcache: Fixed incorrect order of arguments to bio_alloc_bioset()
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 23 Oct 2013 06:52:36 +0000 (07:52 +0100)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- Compilation fixes for GCC < 4.4.6
- one Kbuild dependency select fix (selecting videobuf on msi3101)
- driver fixes on tda10071, e4000, msi3101, soc_camera, s5p-jpeg,
saa7134 and adv7511
- some device quirks needed to make them work properly
- some videobuf2 core regression fixes for some features used only on
embedded drivers
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] saa7134: Fix crash when device is closed before streamoff
[media] adv7511: fix error return code in adv7511_probe()
[media] ths8200: fix compilation with GCC < 4.4.6
[media]
ad9389b: fix compilation with GCC < 4.4.6
[media] adv7511: fix compilation with GCC < 4.4.6
[media] adv7842: fix compilation with GCC < 4.4.6
[media] s5p-jpeg: Initialize vfd_decoder->vfl_dir field
[media] videobuf2-dc: Fix support for mappings without struct page in userptr mode
[media] vb2: Allow queuing OUTPUT buffers with zeroed 'bytesused'
[media] mx3-camera: locking cleanup in mx3_videobuf_queue()
[media] sh_vou: almost forever loop in sh_vou_try_fmt_vid_out()
[media] tda10071: change firmware download condition
[media] msi3101: correct max videobuf2 alloc
[media] Add HCL T12Rg-H to STK webcam upside-down table
[media] msi3101: Kconfig select VIDEOBUF2_VMALLOC
[media] msi3101: msi3101_ioctl_ops can be static
[media] e4000: fix PLL calc bug on 32-bit arch
[media] uvcvideo: quirk PROBE_DEF for Microsoft Lifecam NX-3000
[media] uvcvideo: quirk PROBE_DEF for Dell SP2008WFP monitor
Linus Torvalds [Wed, 23 Oct 2013 06:51:25 +0000 (07:51 +0100)]
Merge tag 'rdma-for-linus' of git://git./linux/kernel/git/roland/infiniband
Pull infiniband bugfix from Roland Dreier:
"Disable not-quite-ready userspace ABI for IB flow steering"
* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/core: Temporarily disable create_flow/destroy_flow uverbs
Linus Torvalds [Wed, 23 Oct 2013 06:47:42 +0000 (07:47 +0100)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"Sorry I let so much accumulate, I was in Buffalo and wanted a few
things to cook in my tree for a while before sending to you. Anyways,
it's a lot of little things as usual at this stage in the game"
1) Make bonding MAINTAINERS entry reflect reality, from Andy
Gospodarek.
2) Fix accidental sock_put() on timewait mini sockets, from Eric
Dumazet.
3) Fix crashes in l2tp due to mis-handling of ipv4 mapped ipv6
addresses, from François CACHEREUL.
4) Fix heap overflow in __audit_sockaddr(), from the eagle eyed Dan
Carpenter.
5) tcp_shifted_skb() doesn't take handle FINs properly, from Eric
Dumazet.
6) SFC driver bug fixes from Ben Hutchings.
7) Fix TX packet scheduling wedge after channel change in ath9k driver,
from Felix Fietkau.
8) Fix user after free in BPF JIT code, from Alexei Starovoitov.
9) Source address selection test is reversed in
__ip_route_output_key(), fix from Jiri Benc.
10) VLAN and CAN layer mis-size netlink attributes, from Marc
Kleine-Budde.
11) Fix permission checks in sysctls to use current_euid() instead of
current_uid(). From Eric W Biederman.
12) IPSEC policies can go away while a timer is still pending for them,
add appropriate ref-counting to fix, from Steffen Klassert.
13) Fix mis-programming of FDR and RMCR registers on R8A7740 sh_eth
chips, from Nguyen Hong Ky and Simon Horman.
14) MLX4 forgets to DMA unmap pages on RX, fix from Amir Vadai.
15) IPV6 GRE tunnel MTU upper limit is miscalculated, from Oussama
Ghorbel.
16) Fix typo in fq_change(), we were assigning "initial quantum" to
"quantum". From Eric Dumazet.
17) Set a more appropriate sk_pacing_rate for non-TCP sockets, otherwise
FQ packet scheduler does not pace those flows properly. Also from
Eric Dumazet.
18) rtlwifi miscalculates packet pointers, from Mark Cave-Ayland.
19) l2tp_xmit_skb() can be called from process context, not just softirq
context, so we must always make sure to BH disable around it. From
Eric Dumazet.
20) On qdisc reset, we forget to purge the RB tree of SKBs in netem
packet scheduler. From Stephen Hemminger.
21) Fix info leak in farsync WAN driver ioctl() handler, from Dan
Carpenter and Salva Peiró.
22) Fix PHY reset and other issues in dm9000 driver, from Nikita
Kiryanov and Michael Abbott.
23) When hardware can do SCTP crc32 checksums, we accidently don't
disable the csum offload when IPSEC transformations have been
applied. From Fan Du and Vlad Yasevich.
24) Tail loss probing in TCP leaves the socket in the wrong congestion
avoidance state. From Yuchung Cheng.
25) In CPSW driver, enable NAPI before interrupts are turned on, from
Markus Pargmann.
26) Integer underflow and dual-assignment in YAM hamradio driver, from
Dan Carpenter.
27) If we are going to mangle a packet in tcp_set_skb_tso_segs() we must
unclone it. This fixes various hard to track down crashes in
drivers where the SKBs ->gso_segs was changing right from underneath
the driver during TX queueing. From Eric Dumazet.
28) Fix the handling of VLAN IDs, and in particular the special IDs 0
and 4095, in the bridging layer. From Toshiaki Makita.
29) Another info leak, this time in wanxl WAN driver, from Salva Peiró.
30) Fix race in socket credential passing, from Daniel Borkmann.
31) WHen NETLABEL is disabled, we don't validate CIPSO packets properly,
from Seif Mazareeb.
32) Fix identification of fragmented frames in ipv4/ipv6 UDP
Fragmentation Offload output paths, from Jiri Pirko.
33) Virtual Function fixes in bnx2x driver from Yuval Mintz and Ariel
Elior.
34) When we removed the explicit neighbour pointer from ipv6 routes a
slight regression was introduced for users such as IPVS, xt_TEE, and
raw sockets. We mix up the users requested destination address with
the routes assigned nexthop/gateway. From Julian Anastasov and
Simon Horman.
35) Fix stack overruns in rt6_probe(), the issue is that can end up
doing two full packet xmit paths at the same time when emitting
neighbour discovery messages. From Hannes Frederic Sowa.
36) davinci_emac driver doesn't handle IFF_ALLMULTI correctly, from
Mariusz Ceier.
37) Make sure to set TCP sk_pacing_rate after the first legitimate RTT
sample, from Neal Cardwell.
38) Wrong netlink attribute passed to xfrm_replay_verify_len(), from
Steffen Klassert.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (152 commits)
ax88179_178a: Add VID:DID for Samsung USB Ethernet Adapter
ax88179_178a: Correct the RX error definition in RX header
Revert "bridge: only expire the mdb entry when query is received"
tcp: initialize passive-side sk_pacing_rate after 3WHS
davinci_emac.c: Fix IFF_ALLMULTI setup
mac802154: correct a typo in ieee802154_alloc_device() prototype
ipv6: probe routes asynchronous in rt6_probe
netfilter: nf_conntrack: fix rt6i_gateway checks for H.323 helper
ipv6: fill rt6i_gateway with nexthop address
ipv6: always prefer rt6i_gateway if present
bnx2x: Set NETIF_F_HIGHDMA unconditionally
bnx2x: Don't pretend during register dump
bnx2x: Lock DMAE when used by statistic flow
bnx2x: Prevent null pointer dereference on error flow
bnx2x: Fix config when SR-IOV and iSCSI are enabled
bnx2x: Fix Coalescing configuration
bnx2x: Unlock VF-PF channel on MAC/VLAN config error
bnx2x: Prevent an illegal pointer dereference during panic
bnx2x: Fix Maximum CoS estimation for VFs
drivers: net: cpsw: fix kernel warn during iperf test with interrupt pacing
...
Freddy Xin [Tue, 22 Oct 2013 07:32:11 +0000 (15:32 +0800)]
ax88179_178a: Add VID:DID for Samsung USB Ethernet Adapter
Add VID:DID for Samsung USB Ethernet Adapter.
Signed-off-by: Freddy Xin <freddy@asix.com.tw>
Signed-off-by: David S. Miller <davem@davemloft.net>
Freddy Xin [Tue, 22 Oct 2013 07:32:10 +0000 (15:32 +0800)]
ax88179_178a: Correct the RX error definition in RX header
Correct the definition of AX_RXHDR_CRC_ERR and
AX_RXHDR_DROP_ERR. They are BIT29 and BIT31 in pkt_hdr
seperately.
Signed-off-by: Freddy Xin <freddy@asix.com.tw>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Lüssing [Sat, 19 Oct 2013 22:58:57 +0000 (00:58 +0200)]
Revert "bridge: only expire the mdb entry when query is received"
While this commit was a good attempt to fix issues occuring when no
multicast querier is present, this commit still has two more issues:
1) There are cases where mdb entries do not expire even if there is a
querier present. The bridge will unnecessarily continue flooding
multicast packets on the according ports.
2) Never removing an mdb entry could be exploited for a Denial of
Service by an attacker on the local link, slowly, but steadily eating up
all memory.
Actually, this commit became obsolete with
"bridge: disable snooping if there is no querier" (
b00589af3b)
which included fixes for a few more cases.
Therefore reverting the following commits (the commit stated in the
commit message plus three of its follow up fixes):
====================
Revert "bridge: update mdb expiration timer upon reports."
This reverts commit
f144febd93d5ee534fdf23505ab091b2b9088edc.
Revert "bridge: do not call setup_timer() multiple times"
This reverts commit
1faabf2aab1fdaa1ace4e8c829d1b9cf7bfec2f1.
Revert "bridge: fix some kernel warning in multicast timer"
This reverts commit
c7e8e8a8f7a70b343ca1e0f90a31e35ab2d16de1.
Revert "bridge: only expire the mdb entry when query is received"
This reverts commit
9f00b2e7cf241fa389733d41b615efdaa2cb0f5b.
====================
CC: Cong Wang <amwang@redhat.com>
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Reviewed-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mattia Dongili [Sun, 18 Aug 2013 10:33:19 +0000 (19:33 +0900)]
sony-laptop: don't change keyboard backlight settings
Do not touch keyboard backlight unless explicitly passed a module
parameter. In this way we won't make wrong assumptions about what are
good default values since they actually are different from model to
model.
The only side effect is that we won't know what is the current value
until set via the sysfs attributes.
Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Sat, 19 Oct 2013 21:57:07 +0000 (14:57 -0700)]
vfs: fix new kernel-doc warnings
Move kernel-doc notation to immediately before its function to eliminate
kernel-doc warnings introduced by commit
db14fc3abcd5 ("vfs: add
d_walk()")
Warning(fs/dcache.c:1343): No description found for parameter 'data'
Warning(fs/dcache.c:1343): No description found for parameter 'dentry'
Warning(fs/dcache.c:1343): Excess function parameter 'parent' description in 'check_mount'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Miklos Szeredi <mszeredi@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Sat, 19 Oct 2013 21:56:55 +0000 (14:56 -0700)]
fs/namei.c: fix new kernel-doc warning
Add @path parameter to fix kernel-doc warning.
Also fix a spello/typo.
Warning(fs/namei.c:2304): No description found for parameter 'path'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 22 Oct 2013 09:24:29 +0000 (10:24 +0100)]
Merge tag 'sound-3.12' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The pending last-minute ASoC fixes, all of which are driver-local
(tlv320aic3x, rcar, pcm1681, pcm1792a, omap, fsl) and should be pretty
safe to apply"
* tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: Add MAINTAINERS entry for dmaengine helpers
ASoC: pcm1792a: Fix max_register setting
ASoC: pcm1681: Fix max_register setting
ASoC: pcm1681: Fix max_register setting
ASoC: rcar: fixup generation checker
ASoC: tlv320aic3x: Connect 'Left Line1R Mux' and 'Right Line1L Mux'
ASoC: fsl: imx-ssi: fix probe on imx31
ASoC: omap: Fix incorrect ARM dependency
ASoC: fsl: Fix sound on mx31moboard
ASoC: fsl_ssi: Fix irq_of_parse_and_map() return value check
Linus Torvalds [Tue, 22 Oct 2013 08:01:11 +0000 (09:01 +0100)]
Merge tag 'jfs-3.12' of git://github.com/kleikamp/linux-shaggy
Pull jfs bugfix from David Kleikamp:
"Just a patch to fix an oops in an error path"
* tag 'jfs-3.12' of git://github.com/kleikamp/linux-shaggy:
jfs: fix error path in ialloc
Linus Torvalds [Tue, 22 Oct 2013 07:23:41 +0000 (08:23 +0100)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Travelling slowed down getting these out.
Two vmwgfx fixes, a radeon revert to avoid a regression, i915 fixes,
and some ioctl sizing issues fixed with 32 on 64"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon/audio: don't set speaker allocation on DCE4+
drm/radeon: rework audio option
drm/radeon/audio: don't set speaker allocation on DCE3.2
drm/radeon: make missing smc ucode non-fatal (CI)
drm/radeon: make missing smc ucode non-fatal (r7xx-SI)
drm/radeon/uvd: revert lower msg&fb buffer requirements on UVD3
drm/radeon: stop the leaks in cik_ib_test
drm/radeon/atom: workaround vbios bug in transmitter table on rs780
drm/i915: Disable GGTT PTEs on GEN6+ suspend
drm/i915: Make PTE valid encoding optional
drm: Pad drm_mode_get_connector to 64-bit boundary
drm: Prevent overwriting from userspace underallocating core ioctl structs
drm/vmwgfx: Don't kill clients on VT switch
drm/vmwgfx: Don't put resources with invalid id's on lru list
drm/i915: disable LVDS clock gating on CPT v2
Linus Torvalds [Tue, 22 Oct 2013 07:22:40 +0000 (08:22 +0100)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
- a partial revert of exponent parsing changes to make "Unit" exponent
item work properly again, by Nikolai Kondrashov
- a few new device IDs additions piggy-backing, by AceLan Kao and David
Herrmann
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: wiimote: add LEGO-wiimote VID
HID: Fix unit exponent parsing again
HID: usbhid: quirk for SiS Touchscreen
HID: usbhid: quirk for Synaptics Large Touchccreen
Linus Torvalds [Tue, 22 Oct 2013 07:21:34 +0000 (08:21 +0100)]
Merge branch 'for-3.12-fixes' of git://git./linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"The only interesting bit is ata_eh_qc_retry() update which fixes a
problem where a SG_IO command may fail across suspend/resume cycle
without the command actually being at fault.
Other changes are low level driver specific and fairly low impact"
* 'for-3.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
libahci: fix turning on LEDs in ahci_start_port()
libata: make ata_eh_qc_retry() bump scmd->allowed on bogus failures
ahci_platform: use dev_info() instead of printk()
ahci: use dev_info() instead of printk()
pata_isapnp: Don't use invalid I/O ports
Linus Torvalds [Tue, 22 Oct 2013 07:20:34 +0000 (08:20 +0100)]
Merge branch 'for-3.12-fixes' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"Two late fixes for cgroup.
One fixes descendant walk introduced during this rc1 cycle. The other
fixes a post 3.9 bug during task attach which can lead to hang. Both
fixes are critical and the fixes are relatively straight-forward"
* 'for-3.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix to break the while loop in cgroup_attach_task() correctly
cgroup: fix cgroup post-order descendant walk of empty subtree
Martin Schwidefsky [Thu, 17 Oct 2013 10:38:17 +0000 (12:38 +0200)]
s390/time: correct use of store clock fast
The result of the store-clock-fast (STCKF) instruction is a bit fuzzy.
It can happen that the value stored on one CPU is smaller than the value
stored on another CPU, although the order of the stores is the other
way around. This can cause deltas of get_tod_clock() values to become
negative when they should not be.
We need to be more careful with store-clock-fast, this patch partially
reverts git commit
e4b7b4238e666682555461fa52eecd74652f36bb "time:
always use stckf instead of stck if available". The get_tod_clock()
function now uses the store-clock-extended (STCKE) instruction.
get_tod_clock_fast() can be used if the fuzziness of store-clock-fast
is acceptable e.g. for wait loops local to a CPU.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Dave Airlie [Tue, 22 Oct 2013 06:35:17 +0000 (07:35 +0100)]
Merge branch 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Most just regression fixes for audio, dpm, and uvd, plus
a resource leak fix for cik.
* 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/audio: don't set speaker allocation on DCE4+
drm/radeon: rework audio option
drm/radeon/audio: don't set speaker allocation on DCE3.2
drm/radeon: make missing smc ucode non-fatal (CI)
drm/radeon: make missing smc ucode non-fatal (r7xx-SI)
drm/radeon/uvd: revert lower msg&fb buffer requirements on UVD3
drm/radeon: stop the leaks in cik_ib_test
drm/radeon/atom: workaround vbios bug in transmitter table on rs780
Dave Airlie [Tue, 22 Oct 2013 06:32:40 +0000 (07:32 +0100)]
Merge tag 'drm-intel-fixes-2013-10-21' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes
Just an lvds clock gating fix and a pte clearing hack for hsw to avoid
memory corruption when hibernating - something doesn't seem to switch off
properly, we're still investigating.
* tag 'drm-intel-fixes-2013-10-21' of git://people.freedesktop.org/~danvet/drm-intel: (96 commits)
drm/i915: Disable GGTT PTEs on GEN6+ suspend
drm/i915: Make PTE valid encoding optional
drm/i915: disable LVDS clock gating on CPT v2
Dirk Brandewie [Mon, 21 Oct 2013 16:20:33 +0000 (09:20 -0700)]
intel_pstate: Correct calculation of min pstate value
The minimum pstate is supposed to be a percentage of the maximum P
state available. Calculate min using max pstate and not the
current max which may have been limited by the user
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Brennan Shacklett [Mon, 21 Oct 2013 16:20:32 +0000 (09:20 -0700)]
intel_pstate: Improve accuracy by not truncating until final result
This patch addresses Bug 60727
(https://bugzilla.kernel.org/show_bug.cgi?id=60727)
which was due to the truncation of intermediate values in the
calculations, which causes the code to consistently underestimate the
current cpu frequency, specifically 100% cpu utilization was truncated
down to the setpoint of 97%. This patch fixes the problem by keeping
the results of all intermediate calculations as fixed point numbers
rather scaling them back and forth between integers and fixed point.
References: https://bugzilla.kernel.org/show_bug.cgi?id=60727
Signed-off-by: Brennan Shacklett <bpshacklett@gmail.com>
Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Neal Cardwell [Mon, 21 Oct 2013 19:40:19 +0000 (15:40 -0400)]
tcp: initialize passive-side sk_pacing_rate after 3WHS
For passive TCP connections, upon receiving the ACK that completes the
3WHS, make sure we set our pacing rate after we get our first RTT
sample.
On passive TCP connections, when we receive the ACK completing the
3WHS we do not take an RTT sample in tcp_ack(), but rather in
tcp_synack_rtt_meas(). So upon receiving the ACK that completes the
3WHS, tcp_ack() leaves sk_pacing_rate at its initial value.
Originally the initial sk_pacing_rate value was 0, so passive-side
connections defaulted to sysctl_tcp_min_tso_segs (2 segs) in skbuffs
made in the first RTT. With a default initial cwnd of 10 packets, this
happened to be correct for RTTs 5ms or bigger, so it was hard to
see problems in WAN or emulated WAN testing.
Since
7eec4174ff ("pkt_sched: fq: fix non TCP flows pacing"), the
initial sk_pacing_rate is 0xffffffff. So after that change, passive
TCP connections were keeping this value (and using large numbers of
segments per skbuff) until receiving an ACK for data.
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mariusz Ceier [Mon, 21 Oct 2013 17:45:04 +0000 (19:45 +0200)]
davinci_emac.c: Fix IFF_ALLMULTI setup
When IFF_ALLMULTI flag is set on interface and IFF_PROMISC isn't,
emac_dev_mcast_set should only enable RX of multicasts and reset
MACHASH registers.
It does this, but afterwards it either sets up multicast MACs
filtering or disables RX of multicasts and resets MACHASH registers
again, rendering IFF_ALLMULTI flag useless.
This patch fixes emac_dev_mcast_set, so that multicast MACs filtering and
disabling of RX of multicasts are skipped when IFF_ALLMULTI flag is set.
Tested with kernel 2.6.37.
Signed-off-by: Mariusz Ceier <mceier+kernel@gmail.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandre Belloni [Mon, 21 Oct 2013 17:09:58 +0000 (19:09 +0200)]
mac802154: correct a typo in ieee802154_alloc_device() prototype
This has no other impact than a cosmetic one.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hannes Frederic Sowa [Mon, 21 Oct 2013 04:17:15 +0000 (06:17 +0200)]
ipv6: probe routes asynchronous in rt6_probe
Routes need to be probed asynchronous otherwise the call stack gets
exhausted when the kernel attemps to deliver another skb inline, like
e.g. xt_TEE does, and we probe at the same time.
We update neigh->updated still at once, otherwise we would send to
many probes.
Cc: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>