staging: comedi: adv_pci_dio: remove 'main_pci_region' boardinfo

All the boards use PCI BAR2 for the dev->iobase except for the pci1736
which uses PCI BAR0. Just use the board->cardtype to determine which
PCI BAR to use.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci_dio: tidy up comedi driver block comment

Reformat the bolck comment in the kernel CodingStyle.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci_dio: remove unnecessary function separation comments

These are not necessary and just add cruft. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

comedi: ni_6527: Fix coding style - use BIT macro

BIT macro is used for defining BIT location instead of
shifting operator - coding style issue

Signed-off-by: Ranjith Thangavel <ranjithece24@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: add "no_channel" versions of some functions

ni_release_ai_mite_channel(), ni_release_ao_mite_channel(),
ni_release_gpct_mite_channel() and ni_release_cdo_mite_channel()
call functions which interpret -1 as a special value meaning "no channel".
This patch adds explicit "no_channel" versions instead.

On the other hand, after "no_channel" versions are used,
ni_set_ai_dma_channel(), ni_set_ao_dma_channel(),
ni_set_gpct_dma_channel(), ni_set_cdo_dma_channel() are called with actual
"channel" parameter being always unsigned, so their signatures are changed
accordingly.

A side benefit of the changes is suppressesing 4 sparse warnings:
"warning: shift too big (4294967295) for type int".

Signed-off-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: comedi: Fixed multiple commenting and spacing codig style issues.

Fixed multiple comment blocks that didn't comply with the
kernels coding style, and fixed a few spacing issues as well.

Signed-off-by: Daniel H. Hemmingsen <dhh.kernel@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

comedi: cb_pcidda: Fix coding style - use BIT macro

BIT macro is used for defining BIT location instead of
shifting operator - coding style issue

Signed-off-by: Ranjith Thangavel <ranjithece24@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

comedi: ni_65xx: Fix coding style - use BIT macro

BIT macro is used for defining BIT location instead of
shifting operator - coding style issue

Signed-off-by: Ranjith Thangavel <ranjithece24@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

comedi: comedi_parport: Fix coding style - use BIT macro

BIT macro is used for defining BIT location instead of
shifting operator - coding style issue

Signed-off-by: Ranjith Thangavel <ranjithece24@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: use kmalloc_array instead of kmalloc

Use kmalloc_array instead of kmalloc to allocate memory for an array.

Signed-off-by: Geliang Tang <geliangtang@163.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgnc: dgnc_cls.c: Replaced udelay by usleep_range

This patch is to file dgnc_cls.c that fixes up udelay function by
usleep_range.
It is safe to use according to the following documentation
Documentation/timers/timers-howto.txt. So that is why I have given
an appropriate time range.

Signed-off-by: Jitendra Kumar Khasdev <jkhasdev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: dgnc: dgnc_tty: Typo error dgnc_wmove comment

Fix Typo errror in the comment section of dgnc_wmove

Signed-off-by: Nizam Haider <nijamh@cdac.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: dgnc: dgnc_neo.c Braces {} should be used on all arms of this statement

Fix Checlpatch warning
HECK: braces {} should be used on all arms of this statement

Signed-off-by: Nizam Haider <nijamh@cdac.in>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver:staging:dgnc Fix spaces preferred around that ...

This fixes all "spaces preferred around that ..." messages from
checkpatch.pl

Signed-off-by: Bogicevic Sasa <brutallesale@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Fix a jump label position in osc_get_info()

The script "checkpatch.pl" pointed out that labels should not be indented.
Thus delete a horizontal tab before the jump label "out"
in the function "osc_get_info".

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Delete an unnecessary variable initialisation in mgc_process_recover_log()

The variable "mne_swab" will eventually be set to an appropriate value
from a call of the ptlrpc_rep_need_swab() function.
Thus let us omit the explicit initialisation at the beginning.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Delete unnecessary goto statements in six functions

Six goto statements referred to a source code position
directly behind them.
Thus omit such unnecessary jumps.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: obdclass: Declare lu_site_hash_ops as static

lu_site_hash_ops is used only in this particular file. Thus declare
it as static.

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: osc: Declare osc_attr_set as static

osc_attr_set is used only in this particular file. Thus declare it
as static.

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: osc: Declare as static

Declare osc_extent_find and osc_unreserve_grant as static since they
are used only in this particular file.

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: libcfs: Remove unused libcfs_debug_set_level

Function libcfs_debug_set_level is defined but not used. Thus
remove it.

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: obdclass: Declare cl_env_peek as static

Declare cl_env_peek as static since it is used only in this file.
Also remove the EXPORT SYMBOL.

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lnet: Remove functions LNetEQWait and LNetEQGet

Functions LNetEQWait and LNetEQGet are defined but not used. Thus
remove it. Also remove corresponding declarations from header file.

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: include: Remove unused llog_backup declaration

Function llog_backup is declared in header file but not used.
Thus remove it.

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fix %.2X versus signed char issue

When char is signed and one of the bytes in lmm happens to have a byte
value above 127, the result of printing that with %.2X will be 8 hex
chars, the first 6 of which are 'F'. Worst case, we'll overrun our
'carefully' allocated buffer.

I didn't have the tenacity to work through the gazillion and seven
layers of macros behind CERROR, but I assume it'll all end at some
function implemented in terms of the kernel's vsnprintf. Use %*phN for
a hexdump. That'll cap the number of dumped bytes at 64. If that's a
problem, the loop could be replaced by "bin2hex(buffer, lmm,
lmm_bytes);".

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lustre: fld: Removed a blank line

Removed a blank line after the open brace to remove the
check detected by the checkpatch.pl.

CHECK: Blank lines aren't necessary after an open brace '{'

Signed-off-by: Anjali Menon <cse.anjalimenon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: libcfs.h: remove IS_PO2 and __is_po2

Removes IS_PO2 and __is_po2 since the uses of IS_PO2 have
been replaced by is_power_of_2

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: hash.c: Replace IS_PO2 by is_power_of_2

Replaces IS_PO2 by is_power_of_2. It is more accurate to use
is_power_of_2 since it returns 1 for numbers that are powers
of 2 only whereas IS_PO2 returns 1 for 0 and numbers that are
powers of 2.

Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lustre: constify inode_operations structures

The inode_operations structures are never modified, so declare them
as const, like all the other inode_operations structures.

Done with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Remove cl_2queue_add wrapper

Remove the wrapper function cl_2queue_add() and replace all its calls in
different files with the function it wrapped. Also, comments are added
wherever necessary to make the working of function clear. Prototype of
the function is also removed from the header file as it is no longer
needed.

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: cl_io: Remove cl_lock_descr_fid wrapper

Remove unnecessary wrapper function cl_lock_descr_fid() and replace all
its calls with the function it wrapped.

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: acl: Remove lustre_posix_acl_xattr_free wrapper

Remove the wrapper function lustre_posix_acl_xattr_free() and replace its
call in the file xattr with the function kfree() that it wrapped. Also,
its prototype from the header lustre_eacl is removed as it is no longer
of any use.

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove obsolete comment in tracefile.h

Remove comment about tracefile handling for user land
version of libcfs that no longer exist. Broken out of
patch http://review.whamcloud.com/11983.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/11983
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove {linux,posix}-tracefile.h

Move the definition of the trace buffer type enum in
libcfs/libcfs/tracefile.h.  Remove the then unneeded headers
libcfs/libcfs/linux/linux-tracefile.h and
libcfs/libcfs/posix/posix-tracefile.h.

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2675
Reviewed-on: http://review.whamcloud.com/11983
Reviewed-by: Bob Glossman <bob.glossman@intel.com>
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: update Intel copyright messages 2015

Update copyright messages in files modified by Intel employees
in 2015 by non-trivial patches.  Exclude patches that are only
deleting code, renaming functions, or adding or removing whitespace.

Signed-off-by: Andreas Dilger <andreas.dilger@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-7243
Reviewed-on: http://review.whamcloud.com/16758
Reviewed-by: James Nunez <james.a.nunez@intel.com>
Reviewed-by: James Simmons <uja.ornl@yahoo.com>
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove unnecessary EXPORT_SYMBOL for lnet layer

A lot of symbols don't need to be exported at all because they are
only used in the module they belong to.

Signed-off-by: frank zago <fzago@cray.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5829
Reviewed-on: http://review.whamcloud.com/13320
Reviewed-by: James Simmons <uja.ornl@gmail.com>
Reviewed-by: Isaac Huang <he.huang@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: remove hsm_nl proc file

Remove the file /proc/fs/lustre/mdc/*/hsm_nl which was introduced "for
testing purposes."

Signed-off-by: John L. Hammond <john.hammond@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2489
Reviewed-on: http://review.whamcloud.com/6656
Reviewed-by: jacques-Charles Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Aurelien Degremont <aurelien.degremont@cea.fr>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: mdc_request: Remove mdc_kuc_reregister wrapper

Remove the wrapper function mdc_kuc_reregister() and replace its call
with the function it wrapped. Also, comment has been added for clarity.

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: workitem: Remove cfs_wi_sched_unlock wrapper

Remove the wrapper function cfs_wi_sched_unlock() and replace all its
calls with the function it wrapped.

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: workitem: Remove cfs_wi_sched_lock wrapper

Remove the wrapper function cfs_wi_sched_lock() and replace all its
calls with the function it wrapped.

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: statahead: Remove agl_list_empty wrapper

Remove the function agl_list_empty() and replace its calls with the
function it wrapped.

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: statahead: Remove sa_received_empty wrapper

Remove the wrapper sa_received_empty() and replace its calls with the
function it wrapped.

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: statahead: Remove agl_first_entry wrapper

Remove the wrapper function agl_first_entry() and replace its calls with
the function list_entry() that it wraps.

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: statahead: Remove sa_first_received_entry wrapper

Remove the function sa_first_received_entry() and replace all its calls
with the function list_entry() that it wraps.

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: statahead: Remove ll_sa_entry_unhashed wrapper

Remove the function ll_sa_entry_unhashed() and replace all its calls
with the function list_empty() that it wrapped.

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lustre_mds: Remove unused md_should_create

md_should_create has been defined in header file but not used.
Thus remove it.

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: rw: Remove wrapper stride_page_count

Remove the function stride_page_count() and replace its calls with the
function stride_pg_count() that it wraps.

Signed-off-by: Shivani Bhardwaj <shivanib134@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Fix module parameter spelling

Fix the spelling of user_credit_return_threshold, it was incorrectly
spelled as user_credit_return_theshold causing two module parameters,
one with typo, to be shown in modinfo

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Remove incorrect link credit check

Remove an invalid sanity check that compares the local link
credits with the peer link credits.  The two have no dependency
on each other.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Change num_rcv_contexts to num_user_contexts and its meaning

num_rcv_contexts sets the number of user contexts, both receive and send.
Renaming it to num_user_contexts makes sense to reflect its true meaning.
When num_rcv_contexts is 0, the default behavior is the number of CPU
cores instead of 0 contexts. This commit changes the variable
num_rcv_contexts to num_user_contexts, and it also makes any negative
value for this variable default to the number of CPU cores, so if
num_user_contexts is set >= 0, the value will number of contexts.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Fix for module parameter hdrq_entsize when it's 0

If driver is loaded with parameter hdrq_entsize=0, then
there's a NULL dereference when the driver gets unloaded.
This causes a kernel Oops and prevents the module  from
being unloaded. This patch fixes this issue by making sure
-EINVAL gets returned when hdrq_entsize=0.

Reviewed-by: Chegondi, Harish <harish.chegondi@intel.com>
Reviewed-by: Haralanov, Mitko <mitko.haralanov@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Fix a possible null pointer dereference

A code inspection pointed out that kmalloc_array may return NULL and
memset doesn't check the input pointer for NULL, resulting in a possible
NULL dereference. This patch fixes this.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: HFI now sends OPA Traps instead of IBTA

send_trap() was still using old ib_smp instead of opa_smp
for formatting and sending traps.

Reviewed-by: Arthur Kepner <arthur.kepner@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Erik E. Kahn <erik.kahn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: add definitions for OPA traps

These new definitions will be used by follow-on
patches for formating and sending OPA traps.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rdma:Delete unnecessary NULL check before calling function "kmem_cache_destroy"

The kmem_cache_destroy() function tests whether its argument is NULL
and then returns immediately.
Thus the NULL check before calling this function is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Yash Shah <yshah1@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: convert buffers allocated atomic to per cpu

Profiling has shown the the atomic is a performance issue
for the pio hot path.

If multiple cpus allocated an sc's buffer, the cacheline
containing the atomic will bounce from L0 to L0.

Convert the atomic to a percpu variable.

Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: fix sdma build failures to always clean up

There are holes in the sdma build support routines that do
not clean any partially built sdma descriptors after mapping or
allocate failures.

This patch corrects these issues.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: fix pio progress routine race with allocator

The allocation code assumes that the shadow ring cannot
be overrun because the credits will limit the allocation.

Unfortuately, the progress mechanism in sc_release_update() updates
the free count prior to processing the shadow ring, allowing the
shadow ring to be overrun by an allocation.

Reviewed-by: Mark Debbage <mark.debbage@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Detect SDMA transmission error early

It is possible for an SDMA transmission error to happen
during the processing of an user SDMA transfer. In that
case it is better to detect it early and abort any further
attempts to send more packets.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Clean-up unnecessary goto statements

Clean-up unnecessary goto statements based on feedback from the
mailing list on previous patch submissions.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Add page lock limit check for SDMA requests

The driver pins pages on behalf of user processes in two
separate instances - when the process has submitted a
SDMA transfer and when the process programs an expected
receive buffer.

When pinning pages, the driver is required to observe the
locked page limit set by the system administrator and refuse
to lock more pages than allowed. Such a check was done for
expected receives but was missing from the SDMA transfer
code path.

This commit adds the missing check for SDMA transfers. As of
this commit, user SDMA or expected receive requests will be
rejected if the number of pages required to be pinned will
exceed the set limit.

Due to the fact that the driver needs to take the MM semaphore
in order to update the locked page count (which can sleep), this
cannot be done by the callback function as it [the callback] is
executed in interrupt context. Therefore, it is necessary to put
all the completed SDMA tx requests onto a separate list (txcmp) and
offload the actual clean-up and unpinning work to a workqueue.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Convert to use get_user_pages_fast

Convert hfi1_get_user_pages() to use get_user_pages_fast(),
which is much fatster. The mm semaphore is still taken to
update the pinned page count but is for a much shorter
amount of time.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Unconditionally clean-up SDMA queues

There is no need to cleck if the packet queue is allocated
when cleaning up a user context. The hfi1_user_sdma_free_queues()
function already does all the required checks.

Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Return immediately on error

Now that the spinlock is not taken throughout hfi1_ioctl it is safe to return
early rather than setting a variable and falling through the switch.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Reduce snoop locking scope in IOCTL handler.

This patch avoids issues while calling into copy from/to user while holding the
lock by only taking the lock when it is absolutely required.

The only commands which require the snoop lock are: *Set Filter *Clear Filter
*Clear Queue

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Further clean up hfi1_ioctl parameter checks

Final clean up of the if/then/else clause for the parameter checks of
hfi1_ioctl

Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: hfi1_ioctl remove setlink state

Set link state is not supported remove from the switch statement and allow the
default to return -ENOTTY

Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Return early from hfi1_ioctl parameter errors

Rather than have a switch in a large else clause make the parameter checks
return immediately.

Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Fix camel case variables

physState, linkState, and devState should be phys_state, link_state, and
dev_state

Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: diag.c correct sizeof parameter

sizeof should use the variable rather than the struct definition to ensure that
type changes are properly accounted for.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: diag.c add missing braces

Else statements should continue using braces even if there is only 1 line in
the block.  Found by checkpatch --strict

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: diag.c change null comparisons

Use !foo rather than (foo == NULL) as recommended by checkpatch --strict

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: diag.c fix white space errors

Add or remove whitespace according to checkpatch --strict

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: diag.c fix logical continuations

Place logical operators at the end of the previous line when using a multi-line
statement.  Found by checkpatch --strict

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: diag.c fix alignment

Fix line alignment in various places as caught by checkpatch --strict.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: diag.c use BIT macros

Use BIT macros rather than shifts.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Adding counter resolutions for DataPortCounters

Changing the 32-bit reserved field in opa_port_data_counters_msg
to the new 'resolution' field. PMA will use resolutions to right-
shift values for LocalLinkIntegrity and LinkErrorRecovery when
computing the ErrorCounterSummary for a DataPortCounters request.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Andrea Lowe <andrea.l.lowe@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Consider VL15 MTU also when calculating the maximum VL MTU

Currently, only MTUs of VLs 0-7 are checked when calculating the maximum VL
MTU which is used to set the port MTU capability in DCC_CFG_PORT_CONFIG CSR
This can cause a port MTU capability to be set to 0 if MTUs of VLs 0-7 is 0
This would affect the VL15 traffic.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Arthur Kepner <arthur.kepner@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: unknown frame messages are not errors

Change reported unknown frame messages into a counter.
These are informational, no errors.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: remove SPC freeze error messages

An SPC freeze is not an error.  Remove the messages.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Unexpected link up pkey values are not an error

Only warn when link up pkeys are not what we expect.  Also, allow
for the pkey to already be initialized.

Reviewed-by: Arthur Kepner <arthur.kepner@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Destroy workqueues if hfi1_register_ib_device() call returns error

Currently, if hfi1_register_ib_device() call is unsuccessful, workqueues
are not being destroyed before bailing out. This patch fixes this issue.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Adds software counters for bitfields within various error status fields

Provides error status counters for CceErrStatus, Send*ErrStatus,
RcvErrStatus and MISC_ERR_STATUS

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Joel Rosenzweig <joel.b.rosenzweig@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Correctly limit VLs against SDMA engines

Correctly reduce the number of VLs when limited by the number
of SDMA engines.

The hardware has multiple egress mechanisms, SDMA and pio, and multiples
of those. These mechanisms are chosen using the VL (8)

The fix corrects a panic issue with one of the platforms that doesn't have
enough SDMA (4) mechanisms for the typical number of VLs.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Add a credit push on diagpkt allocate fail

When sending a diagnostic packet, if the send context does not
have enough room, force a credit return and try again.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Extend quiet timeout

The longest quiet timeout is now 6s.  Extend the driver wait to 6s.

The driver wasn't following our internal specification: 6 seconds.
This patch corrects that issue.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Add one-time LCB reset

Add one-time LCB reset on driver load to pre-emptively work
around any LCB power cycle issues.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Fix qp.h comments

This patch fixes a few incorrect header file comments in qp.h

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Add aeth name syndrome decode

Add aeth name syndrome decode to enhance debugging.

The IBTA RC ACK contains an ACK extended transport header.

Part of that header is the syndrome field that qualifies the RC ACK as an
ACK, NAK, or RNR NAK.

Without the patch here is the syndrome decode:
aeth syn 0x00

Here is the decode with the fix:
aeth syn 0x00 ACK

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Decode CNP opcode

Add CNP opcode decode.

Prior to this patch the trace appeared like:

<idle>-0     [001] d.h. 94062.578932: input_ibhdr: [0000:05:00.0] vl 0
lver 0 sl 0 lnh 2,LRH_BTH dlid 0003 len 6 slid 0001 op 0x80,0x80 se 0 m 0
pad 0 tver 0 pkey 0x8001 f 0 b 0 qpn 0x001234 a 0 psn 0x00000000

Note the "op 0x80,0x80".

With this patch:

<idle>-0     [000] d.h. 233975.912059: input_ibhdr: [0000:05:00.0] vl 0
lver 0 sl 0 lnh 2,LRH_BTH dlid 0015 len 6 slid 0014 op 0x80,CNP se 0 m 0
pad 0 tver 0 pkey 0x8001 f 0 b 0 qpn 0x001234 a 0 psn 0x00000000

Note the "op 0x80,CNP"

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Support alternate firmware names

Add support for an automatic fallback for firmware names to support
debug-signed and production-signed firmware images.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Eliminate WARN_ON when VL is invalid

sdma_select_engine_vl only needs to protect itself from an invalid VL.
Something higher up the stack should be warning the user when they try
to use an SL which maps to an invalid VL.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Ira Weiny <iweiny@gmail.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Fix error in hfi1 driver build

hfi1 driver build fails with the following error:
In function ‘handle_receive_interrupt’:
error: implicit declaration of function ‘skip_rcv_packet’ [-Werror=implicit-function-declaration]
    last = skip_rcv_packet(&packet, thread);
    ^
This is due to the inclusion of the skip_rcv_packet() in the
CONFIG_PRESCAN_RXQ ifdef block. This function is independent of
CONFIG_PRESCAN_RXQ and should be outside this block.

Fixes: 82c2611daaf0 ("staging/rdma/hfi1: Handle packets with invalid RHF on context 0")
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Adjust EPROM partitions, add EPROM commands

Add a new EPROM partition, adjusting partition placement.

Add EPROM range commands as a supserset of the partition
commands.  Remove old partition commands.

Enhance EPROM erase, creating a range function and using the
largest erase (sub) commands when possible.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Read EFI variable for device description

Read an EFI variable for the device description.  Create the
infrastructure for additional variable reads.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: rework is_a0() and is_bx()

The current is_bx() will incorrectly match on other steppings.

is_a0() is removed in favor of is_ax().

Reviewed-by: Mark Debbage <mark.debbage@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Add space between concatenated string elements

Space between concantenated string elements is more human
readable and fixes the checkpatch issue:
CHECK: Concatenated strings should use spaces between elements

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Remove rcv bubbles code

Rcv bubbles were improperly calculated for HFIs, fix that here.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Arthur Kepner <arthur.kepner@intel.com>
Signed-off-by: Ira Weiny <iweiny@gmail.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: remove RxCtxRHQS from hfi1stats

Removed the RxCtxRHQS counter being dumped into dev_cntrs

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Vennila Megavannan <vennila.megavannan@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Fix downgrade race

A link downgrade can race with link up. Avoid the race
in two ways. First, by having the downgrade application logic
take the link state mutex for all of its checking. Second, by
waiting for the link to move out of the going up state.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>