ACPI: EC: Clean ECDT and namespace parsing.

Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

ACPI: EC: Put install handlers into separate function.

Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

ACPI: EC: Remove casts to/from void* from ec.c

Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

ACPI: EC: enable burst functionality in EC.

Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

ACPI: EC: "Fake ECDT" workaround is not needed any longer.

Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

ACPI: EC: Make EC to initialize first in ACPI

Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

ACPI: EC: Don't use Global Lock if not asked to do so

Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

ACPI: ec: fix race in status register access

Delay the read of the EC status register until
after the event that caused it occurs -- otherwise
it is possible to read and act on stale status that was
associated with the previous event.

Do this with a perpetually incrementing "event_count" to detect
when a new event occurs and it is safe to read status.

There is no workaround for polling mode -- it is inherently
exposed to reading and acting on stale status, since it
doesn't have an interrupt to tell it the event completed.

http://bugzilla.kernel.org/show_bug.cgi?id=8110

Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Linux 2.6.21-rc3

.. hopefully most of the resume/suspend problems introduced by the timer
and other changes are behind us.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix floppy build failure.

Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [DCCP]: Set RTO for newly created child socket
  [DCCP]: Correctly split CCID half connections
  [NET]: Fix compat_sock_common_getsockopt typo.
  [NET]: Revert incorrect accept queue backlog changes.
  [INET]: twcal_jiffie should be unsigned long, not int
  [GIANFAR]: Fix compile error in latest git
  [PPPOE]: Use ifindex instead of device pointer in key lookups.
  [NETFILTER]: ip6_route_me_harder should take into account mark
  [NETFILTER]: nfnetlink_log: fix reference counting
  [NETFILTER]: nfnetlink_log: fix module reference counting
  [NETFILTER]: nfnetlink_log: fix possible NULL pointer dereference
  [NETFILTER]: nfnetlink_log: fix NULL pointer dereference
  [NETFILTER]: nfnetlink_log: fix use after free
  [NETFILTER]: nfnetlink_log: fix reference leak
  [NETFILTER]: tcp conntrack: accept SYN|URG as valid
  [NETFILTER]: nf_conntrack/nf_nat: fix incorrect config ifdefs
  [NETFILTER]: conntrack: fix {nf,ip}_ct_iterate_cleanup endless loops

Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] cio: Call cancel_halt_clear even when actl == 0.
  [S390] cio: Use path verification to check for path state.
  [S390] cio: Fix locking when calling notify function.
  [S390] Fixed handling of access register mode faults.
  [S390] dasd: Use default recovery for SNSS requests
  [S390] check_bugs() should be inline.
  [S390] tape: Compression overwrites crypto setting
  [S390] nss: disable kexec.
  [S390] reipl: move dump_prefix_page out of text section.
  [S390] smp: disable preemption in smp_call_function/smp_call_function_on
  [S390] kprobes breaks BUG_ON

Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_pdc202xx_old: fix data corruption and other problems
  pata_legacy: fix io/irq mismatch
  ahci: RAID mode SATA patch for Intel ICH9M

Revert "[PATCH] LOG2: Alter get_order() so that it can make use of ilog2() on a constant"

This reverts commit 39d61db0edb34d60b83c5e0d62d0e906578cc707.

The commit was buggy in multiple ways:
 - the conversion to ilog2() was incorrect to begin with
 - it tested the wrong #defines, so on all architectures but FRV you'd
   never see the bug except for constant arguments.
 - the new "get_order()" macro used its arguments multiple times, and
   didn't even parenthesize them properly
 - despite the comments, it was not true that you could use it for
   constant initializers, since not all architectures even use the
   generic page.h header file.

All of the problems are individually fixable, but it all boils down to:
better just revert it, and re-do it from scratch.

Cc: David Howells <dhowells@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] m68knommu: remove local_bh_count

Remove un-used/un-referenced local_bh_count.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] m68knommu: use irq_handler_t and rtc_time in prototypes

Use irq_handler_t for passing clock handler routine around.
And use new rtc_time in place of hwclock_time.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] m68knommu: GPIO line defines for the ColdFire 5282

For the Freescale M5282 ColdFire,
Port UA Pin Assignment Register should set to UART mode.
Patch submitted by David Wu <davidwu@arcturusnetworks.com>.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] m68knommu: fix work queues in mcfserial.c driver

Fix work queue code to support new model.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] m68knommu: set GPIO lines for serial ports on 5282 in mcfserial.c

For the Freescale M5282 ColdFire,
Port UA Pin Assignment Register should set to UART mode.
Patch submitted by David Wu <davidwu@arcturusnetworks.com>.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] m68knommu: use irq_handler_t and remove regs arg for 68328

Remove regs arg from bad interrupt handler.
Use irq_handler_t type for handler arg of local request_irq().

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] m68knommu: use irq_handler_t for passing handler types in 68328 setup

Use irq_handler_t type for passing around timer interrupt routine
in 368360 setup code.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] m68knommu: use irq_handler_t for passing handler types in 68360 setup

Use irq_handler_t type for passing around timer interrupt routine.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] kexec: Use EFI_LOADER_DATA for ELF core header
  [IA64] permon use-after-free fix
  [IA64] sync compat getdents
  [IA64] always build arch/ia64/lib/xor.o
  [IA64] Remove stack hard limit on ia64
  [IA64] point saved_max_pfn to the max_pfn of the entire system
  Revert "[IA64] swiotlb abstraction (e.g. for Xen)"

Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] IP27: Build fix
  [MIPS] Wire up ioprio_set and ioprio_get.
  [MIPS] Fix __raw_read_trylock() to allow multiple readers
  [MIPS] Export __copy_user_inatomic.
  [MIPS] R2 bitops compile fix for gcc < 4.0.
  [MIPS] TX39: Remove redundant tx39_blast_icache() calls
  [MIPS] Cobalt: Fix early printk
  [MIPS] SMTC: De-obscure Malta hooks.
  [MIPS] SMTC: Add fordward declarations for mm_struct and task_struct.
  [MIPS] SMTC: <asm/mips_mt.h> must include <linux/cpumask.h>
  [MIPS] SMTC: <asm/smtc_ipi.h> must include <linux/spinlock.h>
  [MIPS] Atlas, Malta: Fix build warning.

[PATCH] minor updat to tlclk Kconfig entry

The tlclk driver is going on the MPCBL005 so I need to make the Kconfig
more more generic.  Just some text changes.

Signed-off-by: Mark Gross <mark.gross@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Fix buffer overflow in Omnikey CardMan 4040 driver (CVE-2007-0005)

Based on a patch from Don Howard <dhoward@redhat.com>

When calling write() with a buffer larger than 512 bytes, the
driver's write buffer overflows, allowing to overwrite the EIP and
execute arbitrary code with kernel privileges.

In read(), there exists a similar problem, but coming from the device.
A malicous or buggy device sending more than 512 bytes can overflow
of the driver's read buffer, with the same effects as above.

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Harald Welte <laforge@gnumonks.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] suspend regression: sysfs deadlock

Suspend deadlocks when trying to unregister /sys/block/sr0.

This comes from Oliver's commit 94bebf4d1b8e7719f0f3944c037a21cfd99a4af7
"Driver core: fix race in sysfs between sysfs_remove_file() and
read()/write()".

sysfs_write_file downs buffer->sem while calling flush_write_buffer, and
flushing that particular write buffer entails downing buffer->sem in
orphan_all_buffers, resulting in the obvious self-deadlock.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of /linux/kernel/git/jikos/hid

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid:
  HID blacklisting of all Code Mercenaries IOWarrior devices

Merge branch 'linus' of /linux/kernel/git/perex/alsa

* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa:
  [ALSA] version 1.0.14rc3
  [ALSA] cmipci - Allow to disable integrated FM port
  [ALSA] hda-codec - Fix logic error in headphone mute for Conexant codecs
  [ALSA] hda-codec - Add missing Mic Boost for AD1986A codec
  [ALSA] ac97 - Add Thinkpad X31 and R40 to AD1981x blacklist
  [ALSA] Add missing sysfs device assignment for ALSA PCI drivers
  [ALSA] hda-codec - Define pin configs for MacBooks
  [ALSA] hda-codec - Add missing Mic Boost controls for ALC262
  [ALSA] soc - WM9712 PCM volume
  [ALSA] soc - Fix WM9712 register cache entry
  [ALSA] hda-codec - Add method for configuring Mac Pro without PCI SSID
  [ALSA] hda-codec - Add LFE support on Dell M90

Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] cifs_prepare_write was incorrectly rereading page in some cases
  [CIFS] Fix set file size to zero when doing chmod to Samba 3.0.26pre
  [CIFS] Remove some unused functions/declarations
  [CIFS] New file for previous commit
  [CIFS] cifs export operations
  [CIFS] small piece missing from previous patch
  [CIFS] Fix locking problem around some cifs uses of i_size write

Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  sdhci: release irq during suspend
  sdhci: make isr tolerant of read errors
  mmc: require explicit support for high-speed
  ncpfs: make sure server connection survives a kill

Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  sis900 warning fixes
  mv643xx_eth: Place explicit port number in mv643xx_eth_platform_data
  pcnet32: Fix PCnet32 performance bug on non-coherent architecutres
  __devinit & __devexit cleanups for de2104x driver
  3c59x: Handle pci_enable_device() failure while resuming
  dmfe: Fix link detection
  dmfe: fix two bugs
  dmfe: trivial/spelling fixes
  revert "drivers/net/tulip/dmfe: support basic carrier detection"
  ucc_geth: returns NETDEV_TX_BUSY when BD ring is full
  ucc_geth: Fix BD processing
  natsemi: netpoll fixes
  bonding: Improve IGMP join processing
  bonding: only receive ARPs for us
  bonding: fix double dev_add_pack

[MIPS] IP27: Build fix

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Wire up ioprio_set and ioprio_get.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Fix __raw_read_trylock() to allow multiple readers

A deadlock can occur for mixed irq and non-irq rwlock readers if a 2nd
reader attempts to take lock by looping around __raw_read_trylock().

Signed-off-by: Dave Johnson <djohnson+linux-mips@sw.starentnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Export __copy_user_inatomic.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] R2 bitops compile fix for gcc < 4.0.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] TX39: Remove redundant tx39_blast_icache() calls

Apply commit 0550d9d13e02b30efa117d47fcadea450bb23d23 to c-tx39.c too.
And fix a warning in local_tx39_flush_data_cache_page().

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Cobalt: Fix early printk

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] SMTC: De-obscure Malta hooks.

Should now be understandable why the thing works ...

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] SMTC: Add fordward declarations for mm_struct and task_struct.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] SMTC: <asm/mips_mt.h> must include <linux/cpumask.h>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] SMTC: <asm/smtc_ipi.h> must include <linux/spinlock.h>

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Atlas, Malta: Fix build warning.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[IA64] kexec: Use EFI_LOADER_DATA for ELF core header

The address where the ELF core header is stored is passed to the secondary
kernel as a kernel command line option.  The memory area for this header is
also marked as a separate EFI memory descriptor on ia64.

The separate EFI memory descriptor is at the moment of the type
EFI_UNUSABLE_MEMORY.  With such a type the secondary kernel skips over the
entire memory granule (config option, 16M or 64M) when detecting memory.
If we are lucky we will just lose some memory, but if we happen to have
data in the same granule (such as an initramfs image), then this data will
never get mapped and the kernel bombs out when trying to access it.

So this is an attempt to fix this by changing the EFI memory descriptor
type into EFI_LOADER_DATA.  This type is the same type used for the kernel
data and for initramfs.  In the secondary kernel we then handle the ELF
core header data the same way as we handle the initramfs image.

This patch contains the kernel changes to make this happen.  Pretty
straightforward, we reserve the area in reserve_memory().  The address for
the area comes from the kernel command line and the size comes from the
specialized EFI parsing function vmcore_find_descriptor_size().

The kexec-tools-testing code for this can be found here:
http://lists.osdl.org/pipermail/fastboot/2007-February/005983.html

Signed-off-by: Magnus Damm <magnus@valinux.co.jp>
Cc: Simon Horman <horms@verge.net.au>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] permon use-after-free fix

Perfmon associates vmalloc()ed memory with a file descriptor, and installs
a vma mapping that memory.  Unfortunately, the vm_file field is not filled
in, so processes with mappings to that memory do not prevent the file from
being closed and the memory freed.  This results in use-after-free bugs and
multiple freeing of pages, etc.

I saw this bug on an Altix on SLES9.  Haven't reproduced upstream but it
looks like the same issue is there.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Stephane Eranian <eranian@hpl.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] sync compat getdents

Add VERIFY_WRITE check in the beginning like compat_sys_getdents() (EINVAL vs
EFAULT).

Signed-off-by: Alexandr Andreev <aandreev@openvz.org>
Signed-off-by: Alexey Dobriyan <adobriyan@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] always build arch/ia64/lib/xor.o

Always build ia64 xor.o because multiple config options now depend on it.

Necessary to build .20-mm* on ia64 when, e.g., CONFIG_ASYNC_TX_DMA is
defined.  Don't know if '_ASYNC_TX_DMA makes sense on ia64.  If not, maybe
Kconfig should preclude it.

Could have defined a Kconfig option that defaults to true if MD_RAID456 ||
ASYNC_TX_DMA to control building of xor.o, but xor.o is only 848 bytes and
this IS ia64...

Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Bob Picco <bob.picco@hp.com>
Cc: Eric Whitney <eric.whitney@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] Remove stack hard limit on ia64

Un-Breaks pthreads, since Oct 2003.

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[IA64] point saved_max_pfn to the max_pfn of the entire system

Make saved_max_pfn point to max_pfn of entire system.

Without this patch is so that vmcore is zero length on ia64.  This is
because saved_max_pfn was wrongly being set to the max_pfn of the crash
kernel's address space, rather than the max_pfg on the physical memory of
the machine - the whole purpose of vmcore is to access physical memory that
is not part of the crash kernel's addresss space.

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Sort-Of-Acked-By: Jay Lan <jlan@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>

[DCCP]: Set RTO for newly created child socket

This mirrors a recent change in tcp_open_req_child, whereby the icsk_rto of the
newly created child socket was not set (but rather on the parent socket). Same
fix for DCCP.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[DCCP]: Correctly split CCID half connections

This fixes a bug caused by a previous patch, which causes DCCP servers in
LISTEN state to not receive packets.

This patch changes the logic so that
 * servers in either LISTEN or OPEN state get the RX half connection packets
 * clients in OPEN state get the TX half connection packets

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET]: Fix compat_sock_common_getsockopt typo.

This patch fixes a typo in compat_sock_common_getsockopt.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "[IA64] swiotlb abstraction (e.g. for Xen)"

This reverts commit 51099005ab8e09d68a13fea8d55bc739c1040ca6.

[NET]: Revert incorrect accept queue backlog changes.

This reverts two changes:

8488df894d05d6fa41c2bd298c335f944bb0e401
248f06726e866942b3d8ca8f411f9067713b7ff8

A backlog value of N really does mean allow "N + 1" connections
to queue to a listening socket.  This allows one to specify
"0" as the backlog and still get 1 connection.

Noticed by Gerrit Renker and Rick Jones.

Signed-off-by: David S. Miller <davem@davemloft.net>

[PATCH] kconfig: Update swsusp description

Update the outdated and inaccurate description of the software suspend in
Kconfig.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: provide sunrpc pool_mode module option

Provide a module param "pool_mode" for sunrpc.ko which allows a sysadmin to
choose the mode for mapping NFS thread service pools to CPUs.  Values are:

auto     choose a mapping mode heuristically
global     (default, same as the pre-2.6.19 code) a single global pool
percpu     one pool per CPU
pernode     one pool per NUMA node

Note that since 2.6.19 the hardcoded behaviour has been "auto", this patch
makes the default "global".

The pool mode can be changed after boot/modprobe using /sys, if the NFS and
lockd services have been shut down.  A useful side effect of this change is to
fix a small memory leak when unloading the module.

Signed-off-by: Greg Banks <gnb@melbourne.sgi.com>
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: fix recently introduced problem with shutting down a busy NFS server

When the last thread of nfsd exits, it shuts down all related sockets.  It
currently uses svc_close_socket to do this, but that only is immediately
effective if the socket is not SK_BUSY.

If the socket is busy - i.e.  if a request has arrived that has not yet been
processes - svc_close_socket is not effective and the shutdown process spins.

So create a new svc_force_close_socket which removes the SK_BUSY flag is set
and then calls svc_close_socket.

Also change some open-codes loops in svc_destroy to use
list_for_each_entry_safe.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: remove CONFIG_IPV6 ifdefs from sunrpc server code

They don't really save that much, and aren't worth the hassle.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] knfsd: use recv_msg to get peer address for NFSD instead of code-copying

The sunrpc server code needs to know the source and destination address for
UDP packets so it can reply properly.  It currently copies code out of the
network stack to pick the pieces out of the skb.  This is ugly and causes
compile problems with the IPv6 stuff.

So, rip that out and use recv_msg instead.  This is a much cleaner interface,
but has a slight cost in that the checksum is now checked before the copy, so
we don't benefit from doing both at the same time.  This can probably be
fixed.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] uml: comment the initialization of a global

Comment the fact that sig_info is initialized early in boot, and thus doesn't
need any locking.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] uml: add a debugging message

Add a debugging message in the case that mapping a stub fails.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] uml: fix formatting violations in signal delivery code

Fix a few formatting bugs in the signal code.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] linux/audit.h needs linux/types.h

Include linux/types.h here because we need a definition of __u32.  This file
appears not be exported verbatim by libc, so I think this doesn't have any
userspace consequences.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] initramfs should not depend on CONFIG_BLOCK

initramfs ended up depending on BLOCK:

  INITRAMFS_SOURCE <-- BLK_DEV_INITRD <-- BLOCK

This inhibits use of customized-initramfs-over-ramfs without block layer
(ramfs would still be enabled), useful in embedded applications.

Move BLK_DEV_INITRD out of 'drivers/block/Kconfig' and into 'init/Kconfig',
make it unconditional.

Signed-off-by: Dimitri Gorokhovik <dimitri.gorokhovik@free.fr>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] cciss: add struct pci_driver shutdown support (replaces reboot notifier)

This patch adds support for the struct pci_driver shutdown method to cciss.
 We require notification of an impending reboot or shutdown so that we can
flush the battery backed write cache (BBWC) on the Smart Array controller.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] cciss: fix for 2TB support

This patch changes the way we determine if a logical volume is larger than
2TB.

The original test looked for a total_size of 0.  Originally we added 1 to the
total_size.  That would make our read_capacity return size 0 for >2TB lv's.
We assumed that we could not have a lv size of 0 so it seemed OK until we were
in a clustered system.  The backup node would see a size of 0 due to the
reservation on the drive.  That caused the driver to switch to 16-byte CDB's
which are not supported on older controllers.  After that everything was
broken.

It may seem petty but I don't see the value in trying to determine if the LBA
is beyond the 2TB boundary.  That's why when we switch we use 16-byte CDB's
for all read/write operations.  Please consider this for inclusion.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Publish rcutorture module parameters via sysfs, read-only

rcutorture's module parameters currently use permissions of 0, so they
don't show up in /sys/module/rcutorture/parameters.  Change the permissions
on all module parameters to world-readable (0444).

rcutorture does all of its initialization and thread startup when loaded
and relies on the parameters not changing during execution, so they should
not permit writing.  However, reading seems fine.

Signed-off-by: Josh Triplett <josh@freedesktop.org>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] geode-aes: use unsigned long for spin_lock_irqsave

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] fs: nobh_truncate_page() fix

This fixes a regression caused by 22c8ca78f20724676b6006232bf06cc3e9299539.

nobh_prepare_write() no longer marks the page uptodate, so
nobh_truncate_page() needs to do it.

Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] fix vsyscall settimeofday

I've only seen this on x86_64.

The vsyscall state only gets updated when a timer interrupts comes in.  So
if the time is set long before the next timer, there will be a period when
a gettimeofday() won't reflect the correct time.

I added an explicit update_vsyscall() during the settimeofday(), that way
the vsyscall state doesn't get stale.

Signed-off-by: Daniel Walker <dwalker@mvista.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] mqueue: nested locking annotation

Fix http://bugzilla.kernel.org/show_bug.cgi?id=8130

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] remove arch/i386/kernel/tsc.c:custom_sched_clock

Remove the no longer used custom_sched_clock.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Zachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] highres: do not run the TIMER_SOFTIRQ after switching to highres mode

The TIMER_SOFTIRQ runs the hrtimers during bootup until a usable
clocksource and clock event sources are registered.  The switch to high
resolution mode happens inside of the TIMER_SOFTIRQ, but runs the softirq
afterwards.  That way the tick emulation timer, which was set up in the
switch to highres might be executed in the softirq context, which is a BUG.
 The rbtree has not to be touched by the softirq after the highres switch.

This BUG was observed by Andres Salomon, who provided the information to
debug it.

Return early from the softirq, when the switch was sucessful.

[dilinger@debian.org: add debug warning]
[akpm@linux-foundation.org: make debug warning compile]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andres Salomon <dilinger@debian.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] hrtimers: hrtimer_clock_base description typo

The description for the hrtimer_clock_base struct describes "hrtimer_base".
 That should be hrtimer_clock_base.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] hrtimers: fix HRTIMER_CB_IRQSAFE_NO_SOFTIRQ description

The description for HRTIMER_CB_IRQSAFE_NO_SOFTIRQ is backwards; "NO
SOFTIRQ" sounds a whole lot like it means it must not be run in a softirq.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] i386: make x86_64 tsc header require i386 rather than vice-versa

Prior to commit 95492e4646e5de8b43d9a7908d6177fb737b61f0 ([PATCH] x86:
rewrite SMP TSC sync code), the headers in asm-i386 did not really require
anything in include/asm-x86_64.  This means that distributions such as
fedora did not include asm-x86_64 in kernel-devel headers for i386.  Ingo's
commit changed that, and broke things.  This is easy enough to hack around
in package builds by just including asm-x86_64 on i386, but that's kind of
annoying.  If anything, x86_64 should depend upon i386, not the other way
around.

This patch changes it so that asm-x86_64/tsc.h includes asm-i386/tsc.h,
rather than vice-versa.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Scheduled removal of SA_xxx interrupt flags fixups 3

The obsolete SA_xxx interrupt flags have been used despite the scheduled
removal.  Fixup the remaining users.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Zachary Amsden <zach@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Fix 2.6.21 rfcomm lockups

Any attempt to open/use a bluetooth rfcomm device locks up
scheduling completely on my machine.

Interrupts (ping, alt-sysrq) seem to be alive, but nothing else.

This was working fine in 2.6.20, broken now in 2.6.21-rc2-git*

Reverting this change (below) fixes it:

| author    Marcel Holtmann <marcel@holtmann.org>
|      Sat, 17 Feb 2007 22:58:57 +0000 (23:58 +0100)
| committer    David S. Miller <davem@sunset.davemloft.net>
|      Mon, 26 Feb 2007 19:42:41 +0000 (11:42 -0800)
| commit    c1a3313698895d8ad4760f98642007bf236af2e8
| tree    337a876f727061362b6a169f8759849c105b8f7a    tree | snapshot
| parent    f5ffd4620aba9e55656483ae1ef5c79ba81f5403    commit | diff
| | [Bluetooth] Make use of device_move() for RFCOMM TTY devices
| | In the case of bound RFCOMM TTY devices the parent is not available
| before its usage. So when opening a RFCOMM TTY device, move it to
| the corresponding ACL device as a child. When closing the device,
| move it back to the virtual device tree.
| Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The simplest fix for this bug is to prevent sysfs_move_dir()
from self-deadlocking when (old_parent == new_parent).

This patch prevents total system lockup when using rfcomm devices.

Signed-off-by: Mark Lord <mlord@pobox.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] fbdev: fix kconfig error if FB_DDC=n

Fix the following error if FB_DDC=n

Kernel: arch/x86_64/boot/bzImage is ready  (#1)
  Building modules, stage 2.
  MODPOST 229 modules
WARNING: "fb_ddc_read" [drivers/video/nvidia/nvidiafb.ko] undefined!
make[1]: *** [__modpost] Error 1

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] atyfb: fix kconfig error part 2

Fix implicit declarations and missing code in atyfb.

drivers/video/aty/atyfb_base.c:2137: warning: implicit declaration of function 'a
ty_ld_lcd'
drivers/video/aty/atyfb_base.c:2154: warning: implicit declaration of function 'a
ty_st_lcd'
atyfb_base.c:(.text+0x33e5c): undefined reference to `aty_ld_lcd'
atyfb_base.c:(.text+0x33eb2): undefined reference to `aty_st_lcd'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] nvidiafb backlight: Fix implicit declaration in nv_backlight

drivers/video/nvidia/nv_backlight.c: In function 'nvidia_bl_init':
drivers/video/nvidia/nv_backlight.c:103: error: implicit declaration of function 'pmac_has_backlight_type'

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] fix build with CONFIG_NO_IDLE_HZ=n

arch/i386/kernel/vmi.c: In function 'vmi_safe_halt':
arch/i386/kernel/vmi.c:262: warning: implicit declaration of function 'vmi_stop_hz_timer'
arch/i386/kernel/vmi.c:266: warning: implicit declaration of function 'vmi_account_time_restart_hz_timer'

Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zachary Amsden <zach@vmware.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[PATCH] Save/restore periodic tick information over suspend/resume

The programming of periodic tick devices needs to be saved/restored
across suspend/resume - otherwise we might end up with a system coming
up that relies on getting a PIT (or HPET) interrupt, while those devices
default to 'no interrupts' after powerup. (To confuse things it worked
to a certain degree on some systems because the lapic gets initialized
as a side-effect of SMP bootup.)

This suspend / resume thing was dropped unintentionally during the
last-minute -mm code reshuffling.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

[ALSA] version 1.0.14rc3

Signed-off-by: Jaroslav Kysela <perex@suse.cz>

sdhci: release irq during suspend

Release the device's irq during sleep, as all well-behaved drivers
should.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

sdhci: make isr tolerant of read errors

The interrupt is shared with another device, which resumes earlier than the
sdhci controller, and generates an interrupt.

The sdhci interrupt handler runs, sees 0xffffffff in its own device's
interrupt status, and tries to handle it..  The reason for the 0xffffffff
is that the device is still suspended, and *all* regs are reading back
0xffffffff.

Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

mmc: require explicit support for high-speed

The new high-speed timings are similar to each other and the old
system, but not identical. And although things "just work" most of
the time, sometimes it does not. So we need to start marking which
hosts are known to fully comply with the new timings.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>

ncpfs: make sure server connection survives a kill

Use internal buffers instead of the ones supplied by the caller
so that a caller can be interrupted without having to abort the
entire ncp connection.

Signed-off-by: Pierre Ossman <ossman@cendio.se>
Acked-by: Petr Vandrovec <petr@vandrovec.name>

sis900 warning fixes

drivers/net/sis900.c: In function 'sis900_reset_phy':
drivers/net/sis900.c:972: warning: 'status' may be used uninitialized in this function
drivers/net/sis900.c: In function 'sis900_check_mode':
drivers/net/sis900.c:1431: warning: 'status' may be used uninitialized in this function
drivers/net/sis900.c: In function 'sis900_timer':
drivers/net/sis900.c:1467: warning: 'status' may be used uninitialized in this function

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

mv643xx_eth: Place explicit port number in mv643xx_eth_platform_data

We were using the platform_device.id field to identify which ethernet
port is used for mv643xx_eth device.  This is not generally correct.
It will be incorrect, for example, if a hardware platform uses a single
port but not the first port.  Here, we add an explicit port_number field
to struct mv643xx_eth_platform_data.

This makes the mv643xx_eth_platform_data structure required, but that
isn't an issue since all users currently provide it already.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

pcnet32: Fix PCnet32 performance bug on non-coherent architecutres

The PCnet32 driver always passed the the size of the largest possible packet
to the pci_dma_sync_single_for_cpu and pci_dma_sync_single_for_device.
This results in a fairly large "colateral damage" in the caches and makes
the flush operation itself much slower.  On a system with a 40MHz CPU this
patch increases network bandwidth by about 12%.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Don Fry <pcnet32@verizon.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

__devinit & __devexit cleanups for de2104x driver

Fixes MODPOST warnings similar to:

WARNING: drivers/net/tulip/de2104x.o - Section mismatch: reference to
.init.text:de_init_one from .data.rel.local after 'de_driver' (at offset 0x20)
WARNING: drivers/net/tulip/de2104x.o - Section mismatch: reference to
.exit.text:de_remove_one from .data.rel.local after 'de_driver' (at offset 0x28)

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Valerie Henson <val_henson@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

3c59x: Handle pci_enable_device() failure while resuming

Handle pci_enable_device() failure while resuming, we can safely exit here.

Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

dmfe: Fix link detection

Add link detection

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Valerie Henson <val_henson@linux.intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

dmfe: fix two bugs

Fix a oops on module removal due to deallocating memory before unregistring
driver Fix a NULL pointer dereference when dev_alloc_skb fails

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Valerie Henson <val_henson@linux.intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

dmfe: trivial/spelling fixes

Fix a typo, wrap lines on 80-th column, change KERN_ERR to KERN_INFO for
link status message

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Valerie Henson <val_henson@linux.intel.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

revert "drivers/net/tulip/dmfe: support basic carrier detection"

Revert 7628b0a8c01a02966d2228bdf741ddedb128e8f8.  Thomas Bachler
reports:

  Commit 7628b0a8c01a02966d2228bdf741ddedb128e8f8 (drivers/net/tulip/dmfe:
  support basic carrier detection) breaks networking on my Davicom DM9009.
  ethtool always reports there is no link.  tcpdump shows incoming packets,
  but TX is disabled.  Reverting the above patch fixes the problem.

Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Valerie Henson <val_henson@linux.intel.com>
Cc: Thomas Bachler <thomas@archlinux.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

ucc_geth: returns NETDEV_TX_BUSY when BD ring is full

Returns NETDEV_TX_BUSY when BD ring is full.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

ucc_geth: Fix BD processing

Fix broken BD processing code.

Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>