staging: wilc1000: wilc_wlan_txq_filter_dup_tcp_ack: add argument and use wilc

This patch add argument net_device dev and use netdev private data member wilc
instead of g_linux_wlan. Pass argument dev to the function.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wlan_handle_txq: add argument and use wilc

This patch adds argument net_device dev and use netdev private data memeber
wilc instead of g_linux_wlan.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: linux_wlan_txq_task: use wilc instead of g_linux_wlan

Pass argument dev instead of wilc from kthread_run and use netdev private data
member wilc instead of g_linux_wlan.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wlan_initialize_threads: change argument with net_device

This patch changes function argument with net_device and use netdev private
data member wilc instead of g_linux_wlan. And there are assignment code with
different value continuously. Take last code.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: linux_wlan_set_bssid: use wilc instead of g_linux_wlan

This patch uses netdev private data memeber wilc instead of g_linux_wlan.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: linux_wlan_mac_indicate: add argument and use wilc

This patch adds argument wilc and pass the function wilc. Use wilc instead of
g_linux_wlan and pd.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wlan_handle_rxq: add new argument and use wilc

This patch adds new argument struct wilc and use it instead of g_linux_wlan.
Pass wilc to the function as well.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_wlan_handle_isr_ext: add argument struct wilc

This patch adds argument struct wilc and pass wilc to the function.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_handle_isr: add argument wilc to wilc_handle_isr

This patch add new argument wilc to wilc_handle_isr and pass wilc to
the function.
It is void type for now because wilc_wlan.c was implemented platform
independently at the beginning (linux_wlan.c is implementation of LINUX part),
so the header file which defines struct wilc cannot be included at this moment,
but this driver is dedicated to LINUX so wilc_wlan.c and linux_wlan.c will be
merged. After that, this void type will be changed with struct wilc as well as
other functions which are using void type in wilc_wlan.h.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: deinit_irq: use wilc instead of g_linux_wlan

This patch changes function parameter linux_wlan_t nic with net_dev dev and
use netdev private data member wilc instead of nic and g_linux_wlan.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: isr_bh_routine: use wilc instead of g_linux_wlan

Use netdev private data member wilc instead of g_linux_wlan.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wicl1000: isr_uh_routine: use netdev private wilc

Use netdev private member wilc instead of g_linux_wlan and change argument wilc
with dev in the function request_threaded_irq to pass back to handler
the function isr_uh_routine.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: fix build error on SPI

wilc_netdev_init function has parameters to pass but no argument is passed
when bus type SPI is selected. Which causes build error.
This patch passes argument &wilc to the function wilc_netdev_init.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Fixes: 12ba5416dc77 ("staging: wilc1000: assign pointer of g_linux_wlan to sdio device data")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: cleanup over 80 characters in libcfs_hash.h

Fix up all the over 80 character line issues in libcfs_hash.h
reported by checkpatch.pl. At the same time update this header
to match what is in the OpenSFS lustre branch.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: convert last typedef data types in hash.c

Change the last typedef data types cfs_hash_lookup_intent_t
to enum and cfs_hash_cond_arg_t to a structure.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: change cfs_hash_head*_t to struct

Change cfs_hash_head_t and cfs_head_head_dep_t
from typedef to true structures.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: change cfs_hash_dhead*_t to struct

Change cfs_hash_dhead_t and cfs_head_dhead_dep_to
from typedef to true structures.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: change cfs_hash_ops_t to struct

Change cfs_hash_ops_t to struct cfs_hash_ops.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: change cfs_hash_hlist_ops_t to struct

Change cfs_hash_hlist_ops_t to struct cfs_hash_hlist_ops.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: change cfs_hash_lock_ops_t to struct

Change cfs_hash_lock_ops_t to struct cfs_hash_lock_ops.

Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Remove unused lustre_lfsck_user.h file

Remove the header file lustre_lfsck_user.h since it is not needed

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: rtl871x_io: Remove unused function

Drop function that is declared but not called anywhere.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: core: Remove unnecessary functions

Drop functions that are declared but are not being used anywhere.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: wlan-ng: Remove unused p80211meta.h file

Remove the header file p80211meta.h since it is not needed

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: adc: Fix sparse warning

Fix following sparse endianness problems:

  CHECK   drivers/staging/iio/adc/ad7816.c
drivers/staging/iio/adc/ad7816.c:91:17: warning: cast to restricted
__be16
drivers/staging/iio/adc/ad7816.c:91:17: warning: cast to restricted
__be16
drivers/staging/iio/adc/ad7816.c:91:17: warning: cast to restricted
__be16
drivers/staging/iio/adc/ad7816.c:91:17: warning: cast to restricted
__be16

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: iio: impedance-analyzer: Fix sparse warning

Fix following sparse endian warning:

drivers/staging/iio/impedance-analyzer/ad5933.c:671:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:671:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:671:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:671:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:672:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:672:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:672:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:672:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:674:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:674:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:674:34: warning: cast to restricted __be16
drivers/staging/iio/impedance-analyzer/ad5933.c:674:34: warning: cast to restricted __be16

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: panel: Logical continuations should be on the previous line

This patch fixes the checkpatch issue:

CHECK: Logical continuations should be on the previous line

Signed-off-by: Sirnam Swetha <theonly.ultimate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: panel: usleep_range is preferred over udelay

This patch fixes the issue:

CHECK: usleep_range is preferred over udelay; see
Documentation/timers/timers-howto.txt

Signed-off-by: Sirnam Swetha <theonly.ultimate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: panel: Removing multiple blank lines

This patch fixes the checkpatch issue

CHECK: Please don't use multiple blank lines

Signed-off-by: Sirnam Swetha <theonly.ultimate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: panel: spaces preferred around that '/'

This patch fixes the checkpatch issue:

CHECK: spaces preferred around that '/'

Signed-off-by: Sirnam Swetha <theonly.ultimate@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Update driver version string to 0.9-294

Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: add additional rc traces

Add additional rc traces to aid in debugging rc retry logic.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Add unit # to verbs txreq cache name

The name used to create the verbs txreq cache was not qualified with the unit
number. This causes a panic when destroying the cache on a dual HFI systems.
Create a unique name with the unit number with this patch

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Load SBus firmware once per ASIC

Using fw_sbus_load to control SBus firmware load doesn't scale across multiple
HFI1 cards in a single system. This patch ensures that the SBus firmware is
loaded once per ASIC.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Thread the receive interrupt.

When under heavy load, the receive interrupt handler can run too long with IRQs
disabled.  Add a mixed-mode threading scheme.  Initially process packets in the
handler for quick responses (latency).  If there are too many packets to
process move to a thread to continue (bandwidth).

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Add irqsaves in the packet processing path

In preparation for threading the receive interrupt, add irqsaves in the packet
processing path.

When the receive interrupt is threaded, the packet processing path is no longer
guaranteed to have IRQs disabled.  Add irqsaves where needed on several locks
in the packet processing path.  Anything that did not have an obvious, "close"
irqsave in its caller is a candidate.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Increase SDMA descriptor queue size

A value of 2048 increased PSM performance while not impacting verbs
performance.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Ignacio Hernandez <ignacio.hernandez@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Allow tuning of SDMA interrupt rate

The SDMA engines were configured to generate progress interrupts every time they
processed N/2 descriptors (where N is the size of the descriptor queue). This
interval was too infrequent, leading to degraded performance.

This commit adds a module parameter, as well as a recommended default, which
allows for the tuning of the interrupt frequency.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Wrong cast breaks desired pointer arithmetic

The address being mapped into a process's memory for notification events was
improperly calculated due to cast that was happening too early. dd->events is a
pointer and should have been casted to unsigned long after the pointer
arithmetic was done, not before.

As a result, processes were looking at the wrong place and not seeing their
notification events.

Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Prevent silent data corruption with user SDMA

User SDMA keeps track of progress into the submitted IO vectors by tracking an
offset into the vectors when packets are submitted. This offset is updated
after a successful submission of a txreq to the SDMA engine.

The same offset was used when determining whether an IO vector should be
'freed' (pages unpinned) in the SDMA callback functions.

This was causing a silent data corruption in big jobs (> 2 nodes, 120 ranks
each) on the receive side because the send side was mistakenly unpinning the
vector pages before the HW has processed all descriptors referencing the
vector.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Fix port bounce issues with 0.22 DC firmware

The DC firmware overwrites the enable_lane_tx register and does not update it
on a host request to go to Poll. This causes an infinite loop through the LNI
state machine if a link width downgrade occurs. This patch re-sets the
enable_lane_tx register to all 4 lanes.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Add a schedule in send thread

When under heavy load, the send handler can run too long without allowing other
tasks to run.  Add a conditional resched to break this up.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Reset firmware instead of reloading Sbus

Reset firmware instead of reloading Sbus firmware if it's already done for this
ASIC.  To work around thermal polling problem in firmware, don't reload Sbus
firmware, instead, reset the firmware on the initialization of the second HFI.

Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: close shared context security hole

Driver does not verify userid for shared context assignments, allowing
malicious user access.

Reviewed by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jareer H Abdel-Qader <jareer.h.abdel-qader@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Add coalescing support for SDMA TX descriptors

This fixes transmit errors when the number of scatter gather elements in the
request is more that the number of per packet descriptors supported by the
hardware, allocate and coalesce the extra scatter gather elements into a single
buffer. The last descriptor is reserved and used for this coalesced buffer.

Verbs potentially need this support when transferring small data chunks
involving different memory regions.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Remove QSFP_ENABLED from HFI capability mask

The QSFP interface code has been running without issues and the flag is
never set to off. This patch removes the QSFP_ENABLED bit from HFI1_CAP.

Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Prevent host software lock up

If packets stop egressing the hardware link, software can lock up.

Implement a timeout for send context halt recovery.  This patch increases the
timeout for packet egress to 500 us and timer resets to zero if the packet
occupancy changes. Also we bounce the link on time out.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Vennila Megavannan <vennila.megavannan@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Extend the offline timeout

The latest version of the 8051 firmware will wait longer
when bringing the link down.  Extend the driver's timeout
to go with that.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Fix code to reset ASIC CSRs on FLR

The ASIC registers were not reset on FLR, and the code to
protect the ASIC block against multiple initializations by
peer HFIs did not extend to multiple ASICs in a system. This
patch addresses this gap.

Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rdma/hfi1: Fix regression in send performance

The clear_ahg call is new in hfi1 vs qib.  For small messages the progress
routine always builds one and clears out the ahg state when the queue has gone
to empty which is the predominant case for small messages.

Inline the routine and avoid the call to sdma_ahg_free to mitigate the
performance impact.  Finally, move the routine to qp.h for scope reasons.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hfi1: sdma: Use setup_timer

Use the timer API function setup_timer instead of init_timer, removing
the structure field assignments.

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: hfi1: driver: Use setup_timer

Use the timer API function setup_timer instead of init_timer, removing
the structure field assignments.

<smpl>

@timer@
expression e1,e2,e3,fn_ptr;
@@
-init_timer(&e1);
+setup_timer(&e1, fn_ptr, e2);
... when != fn_ptr = e3
-e1.function = fn_ptr;
-e1.data = e2;

</smpl>

Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove unused fields from struct sm750_dev

The {x,y}LCD fields of struct sm750_dev are not used and can be removed.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove '#ifdef CAP_EXP*' conditionals

There are several occurencies of '#ifdef CAP_EXP<something>', spelled
differently each time. None of these is ever defined and therefore they
enclose dead code that can be removed.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: merge lynx_share into sm750_dev

Both struct lynx_share and struct sm750_dev reprsent some parts of the
SM750 graphics adapter. There is no point to keep these parts in
different structures.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove unused field in lynx_cursor

The lynx_share field in lynx_cursor structure is never used and can be
removed.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: fix wrong indentation

Fix wrong indentation of a line in lynxfb_set_fbinfo

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use sm750_dev with pci_{get, set}_drvdata

Use sm750_dev as private driver data for the PCI device

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: use 'struct sm750_dev *' instead of 'void *'

Use proper 'struct sm750_dev *' type instead of 'void *'

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: replace lynx_share with sm750_dev in function calls

Use sm750_dev rather than lynx_share as parameter for hw_sm750_map,
hw_sm750_inithw and hw_sm750_initAccel functions.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove hw_sm750_getVMSize function

The hw_sm750_getVMSize wraps ddk750_getVMSize without any added
functionality. Call ddk750_getVMSize directly and remove
hw_sm750_getVMSize.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: replace lynx_share with sm750_dev in lynxfb_par

Use sm750_dev instead of lynx_share in the private data of the
frambuffer device.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove unused PROC_SPEC_* typedefs

The PROC_SPEC* typedefs are not used and can be removed

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: merge struct sm750_state into struct sm750_dev

The struct sm750_state is never used on its own. Merge it into the
struct sm750_dev.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: rename 'struct sm750_dev' variables to sm750_dev

Use consistent naming for 'struct sm750_dev' variables

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: rename struct sm750_share to sm750_dev

The struct sm750_share represents the device state and name sm750_dev
seems more appropriate.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: merge sm750_hw.h into sm750.h

There is no actual need to split type definitions and global function
declarations between lots of small headers.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove unused smi_indent variable

The smi_indent variable is only declared, but never used. Remove it.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: replace PADDING macro with ALIGN

The custom macro PADDING differs from standard kernel ALIGN only in
parameters order. Replace PADDING with ALIGN and remove it's definition.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: remove unused SPC_SM750 define

The SPC_SM750 define is not used and can be removed

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: replace lynx_cursor methods with function calls

The methods in lynx_cursor always use the same implementation and there is
no point to use redirection rather than direct function call.

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8723au: remove unneeded forward function declarations

Remove unneeded forward function declarations.

Addresses checkpatch.pl:
WARNING: externs should be avoided in .c files

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8723au: move function type in line with function name

Move function types to be adjacent to the function names in
declarations to improve readability.

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8723au: insert correct spacing around operands

Adds required spacing around operands to improve readability.
Corrects checkpatch.pl ERROR: spaces required *

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: r8723au: use kernel preferred style for commenting

Reworked comments per kernel coding style to improve readability.

Corrects checkpatch.pl:
WARNING: Block comments use * on subsequent lines
WARNING: line over 80 characters

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unnecessary variables

Remove unnecessary variable that can be replaced with a single line
of code.

The semantic patch used to find this is:

// <smpl>
@@
expression ret;
@@
- if (ret) return ret;
- return 0;
+ return ret;

@@
local idexpression ret;
expression e;
@@
- ret = e;
- return ret;
+ return e;

@@
type T;
identifier i;
expression E;
@@
- T i = E;
 ... when != i

@@
type T;
identifier i;
@@
- T i;
 ... when != i
// </smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: rtl871x_mp: Remove unused function

Drop unused function that is defined but is not called anywhere.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Remove unnecessary variables

Remove unnecessary variables that can be replaced with a single line of code.

The semantic patch used to find this is:

// <smpl>
@@
expression ret;
@@
- if (ret) return ret;
- return 0;
+ return ret;

@@
local idexpression ret;
expression e;
@@
- ret = e;
- return ret;
+ return e;

@@
type T;
identifier i;
expression E;
@@
- T i = E;
 ... when != i

@@
type T;
identifier i;
@@
- T i;
 ... when != i
// </smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lprocfs_status: Remove unused declaration

Remove declaration of function lprocfs_wr_timeouts from header file
since it is not used

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lustre_log: Remove unused functions

Remove the functions which are defined but not used anywhere

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: mt29f_spinand: Indent to match open parenthesis

Fix alignment issues by properly indenting function parameters in
accordance to the kernel coding style. Checkpatch pointed out this
issue.

CHECK: Alignment should match open parenthesis

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: ieee80211: Do not export static function

Remove the export symbol for static function.

The semantic patch used to find this is:

// <smpl>
@r@
type T;
identifier f;
@@

static T f (...) { ... }

@@
identifier r.f;
declarer name EXPORT_SYMBOL;
@@

-EXPORT_SYMBOL(f);
// </smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: omap4iss: Fixes line break

This patch fixes the checkpatch issue:

CHECK: Logical continuations should be on the previous line

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: omap4iss: Matches alignment with open parenthesis

This patch fixes some of the checkpatch issue:

CHECK: Alignment should match open parenthesis

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: omap4iss: Removes unnecessary blank lines

This patch fixes checkpatch issues:

CHECK: Blank lines aren't necessary before a close brace '}'
CHECK: Please don't use multiple blank lines

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: omap4iss: Replaces bit shift on 1 with BIT Macro

This patch fixes some of the checkpatch issue:

CHECK: Prefer using the BIT macro

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: omap4iss: Fixes misspelling

This patch fixes the checkpatch issue:

CHECK: 'splitted' may be misspelled - perhaps 'split'?

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: omap4iss: Fixes NULL comparison

This patch fixes the checkpatch issue:

CHECK: Comparison to NULL could be written

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Do not use multiple blank lines.

Remove multiple blank lines. Problem found using checkpatch.pl
"CHECK: Please don't use multiple blank lines"

Signed-off-by: Burcin Akalin <brcnakalin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Add space around '|'

Add space around operator '|'. Problem found using
checkpatch.pl
CHECK: spaces preferred around that '|' (ctx:VxV)

Signed-off-by: Burcin Akalin <brcnakalin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: dummy: replace block comment with single line comment

Replace one block comment with a single line comment. Follow style of
previous comment and omit word channel, since it's clear the topic is
channels.

Addresses checkpatch.pl:
WARNING: Block comments use * on subsequent lines

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: dummy: use uppercase descriptors for enum names

Replace lower case names in the enum dummy_scan_elements with
uppercase names and a descriptive prefix: DUMMY_INDEX_

Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: adis16060_core: Fix error handling

We need to check adis16060_spi_read return code to avoid feeding user
space with bogus data.
While, at it introduce out_unlock label in order to simplify locking
on error path.

Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: Remove unused variable

Remove variable that is initialized but not used.

Signed-off-by: Cristina Moraru <cristina.moraru09@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: nvec: Do not use multiple blank lines.

Remove multiple blank lines. Problem found using checkpatch.pl
"CHECK: Please don't use multiple blank lines".

Signed-off-by: Burcin Akalin <brcnakalin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Fixes block comment style

This patch fixes the checkpatch.pl warnings:

WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Adds space around operators

This patch fixes the checkpatch.pl check:

CHECK: spaces preferred around that ‘’

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Removes unnecessary space after a cast

This patch fixes the checkpatch.pl check:

CHECK: No space is necessary after a cast

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Removes multiple blank lines

This patch fixes the checkpatch.pl check:

CHECK: Please don't use multiple blank lines

Signed-off-by: Amarjargal Gundjalam <amarjargal.gundjalam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fsl-mc: section mismatch bug fix

WARNING: drivers/staging/built-in.o(.init.text+0xdc): Section mismatch in reference from the function fsl_mc_bus_driver_init() to the function .exit.text:dprc_driver_exit()
The function __init fsl_mc_bus_driver_init() references
a function __exit dprc_driver_exit().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __exit annotation of
dprc_driver_exit() so it may be used outside an exit section.

Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>