GitHub/moto-9609/android_kernel_motorola_exynos9610.git
17 years ago[PATCH] kconfig: make sym_change_count static, let it be altered by 2 functions only
Karsten Wiese [Wed, 13 Dec 2006 08:34:07 +0000 (00:34 -0800)]
[PATCH] kconfig: make sym_change_count static, let it be altered by 2 functions only

Those two functions are
void sym_set_change_count(int count)
and
void sym_add_change_count(int count)

All write accesses to sym_change_count are replaced by calls to above
functions.

Variable and changer-functions are moved to confdata.c.  IMO thats ok, as
sym_change_count is an attribute of the .config's change state.

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] kconfig: new function "bool conf_get_changed(void)"
Karsten Wiese [Wed, 13 Dec 2006 08:34:06 +0000 (00:34 -0800)]
[PATCH] kconfig: new function "bool conf_get_changed(void)"

Run "make xconfig" on a freshly untarred kernel-tree.  Look at the floppy disk
icon of the qt application, that has just started: Its in a normal, active
state.

Mouse click on it: .config is being saved.

This patch series changes things so taht
after the mouse click on the floppy disk icon, the icon is greyed out.
If you mouse click on it now, nothing happens.

If you change some CONFIG_*, the floppy disk icon returns to "active state",
that is, if you mouse click it now, .config is written.

This patch:

Returns sym_change_count to reflect the .config's change state.
All read only accesses of
sym_change_count
are replaced by calls to
conf_get_changed()
.
mconfig.c is manipulated to ask for saving only when
conf_get_changed() returned true.

Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] vt: fix comments to not refer to kill_proc
Eric W. Biederman [Wed, 13 Dec 2006 08:34:05 +0000 (00:34 -0800)]
[PATCH] vt: fix comments to not refer to kill_proc

The code has been fixed to use kill_pid instead of kill_proc fix the
comments as well.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] Revert "[PATCH] identifier to nsproxy"
Eric W. Biederman [Wed, 13 Dec 2006 08:34:04 +0000 (00:34 -0800)]
[PATCH] Revert "[PATCH] identifier to nsproxy"

This reverts commit 373beb35cd6b625e0ba4ad98baace12310a26aa8.

No one is using this identifier yet.  The purpose of this identifier is to
export nsproxy to user space which is wrong.  nsproxy is an internal
implementation optimization, which should keep our fork times from getting
slower as we increase the number of global namespaces you don't have to
share.

Adding a global identifier like this is inappropriate because it makes
namespaces inherently non-recursive, greatly limiting what we can do with
them in the future.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] constify pipe_buf_operations
Eric Dumazet [Wed, 13 Dec 2006 08:34:04 +0000 (00:34 -0800)]
[PATCH] constify pipe_buf_operations

- pipe/splice should use const pipe_buf_operations and file_operations

- struct pipe_inode_info has an unused field "start" : get rid of it.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] KVM: Add MAINTAINERS entry
Avi Kivity [Wed, 13 Dec 2006 08:34:03 +0000 (00:34 -0800)]
[PATCH] KVM: Add MAINTAINERS entry

Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] KVM: MMU: Ignore pcd, pwt, and pat bits on ptes
Avi Kivity [Wed, 13 Dec 2006 08:34:02 +0000 (00:34 -0800)]
[PATCH] KVM: MMU: Ignore pcd, pwt, and pat bits on ptes

The pcd, pwt, and pat bits on page table entries affect the cpu cache.  Since
the cache is a host resource, the guest should not be able to control it.
Moreover, the meaning of these bits changes depending on whether pat is
enabled or not.

So, force these bits to zero on shadow page table entries at all times.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] KVM: Remove extranous put_cpu() from vcpu_put()
Avi Kivity [Wed, 13 Dec 2006 08:34:01 +0000 (00:34 -0800)]
[PATCH] KVM: Remove extranous put_cpu() from vcpu_put()

The arch splitting patchset left an extra put_cpu() in core code, where it can
cause trouble for CONFIG_PREEMPT kernels.

Reported-by: Huihong Luo <huisinro@yahoo.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] KVM: Move find_vmx_entry() to vmx.c
Avi Kivity [Wed, 13 Dec 2006 08:34:01 +0000 (00:34 -0800)]
[PATCH] KVM: Move find_vmx_entry() to vmx.c

Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] KVM: Make the GET_SREGS and SET_SREGS ioctls symmetric
Uri Lublin [Wed, 13 Dec 2006 08:34:00 +0000 (00:34 -0800)]
[PATCH] KVM: Make the GET_SREGS and SET_SREGS ioctls symmetric

This makes the SET_SREGS ioctl behave symmetrically to the GET_SREGS ioctl wrt
the segment access rights flag.

Signed-off-by: Uri Lublin <uril@qumranet.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] Fix section mismatch in parainstructions
Randy Dunlap [Wed, 13 Dec 2006 08:33:57 +0000 (00:33 -0800)]
[PATCH] Fix section mismatch in parainstructions

Section .parainstructions should not warn about section mismatches.

WARNING: drivers/net/hamradio/scc.o - Section mismatch: reference to .exit.text: from .parainstructions after '' (at offset 0x0)
WARNING: drivers/net/hamradio/scc.o - Section mismatch: reference to .exit.text: from .parainstructions after '' (at offset 0x8)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Andi Kleen <ak@suse.de>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] i2o_exec_exit and i2o_driver_exit should not be __exit.
Ralf Baechle [Wed, 13 Dec 2006 08:33:53 +0000 (00:33 -0800)]
[PATCH] i2o_exec_exit and i2o_driver_exit should not be __exit.

i2o_exec_exit and i2o_driver_exit were marked as __exit which is a bug
because both are invoked from __init and __exit functions.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] isdn/gigaset: fix possible missing wakeup
Tilman Schmidt [Wed, 13 Dec 2006 08:33:52 +0000 (00:33 -0800)]
[PATCH] isdn/gigaset: fix possible missing wakeup

Eliminate some possibilities for user processes writing to the Gigaset
character device to be left sleeping indefinitely, by adding wakeup calls
to error paths and properly disposing of pending write requests when the
device is disconnected.

It also removes unnecessary NULL checks before usb_free_urb() and
usb_kill_urb() calls.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] uml: fix net_kern workqueue abuse
Peter Zijlstra [Wed, 13 Dec 2006 08:33:50 +0000 (00:33 -0800)]
[PATCH] uml: fix net_kern workqueue abuse

Fix up the work on stack and exit scope trouble by placing the work_struct
in the uml_net_private data.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Jeff Dike <jdike@addtoit.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] another build fix, header rearrangements (OSK)
David Brownell [Wed, 13 Dec 2006 08:33:49 +0000 (00:33 -0800)]
[PATCH] another build fix, header rearrangements (OSK)

Some of the header file rearrangements broke the build for board-osk.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: <tony@atomide.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] fix more workqueue build breakage (tps65010)
David Brownell [Wed, 13 Dec 2006 08:33:46 +0000 (00:33 -0800)]
[PATCH] fix more workqueue build breakage (tps65010)

More fixes to build breakage from the work_struct changes ...  this updates
the tps65010 driver.  Plus, fix some dependencies related to the way it's
used on the OMAP OSK: force static linking there, since the resulting
kernel can't link.

NOTE that until the i2c core gets fixed to work without SMBUS_QUICK,
kernels needing this driver must still use "tps65010.force=0,0x48" on the
command line.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] KVM: Replace __x86_64__ with CONFIG_X86_64
Avi Kivity [Wed, 13 Dec 2006 08:33:45 +0000 (00:33 -0800)]
[PATCH] KVM: Replace __x86_64__ with CONFIG_X86_64

As per akpm's request.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] KVM: Clean up AMD SVM debug registers load and unload
Avi Kivity [Wed, 13 Dec 2006 08:33:45 +0000 (00:33 -0800)]
[PATCH] KVM: Clean up AMD SVM debug registers load and unload

By letting gcc choose the temporary register for us, we lose arch dependency
and some ugliness.  Conceivably gcc will also generate marginally better code.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] KVM: Put KVM in a new Virtualization menu
Avi Kivity [Wed, 13 Dec 2006 08:33:44 +0000 (00:33 -0800)]
[PATCH] KVM: Put KVM in a new Virtualization menu

Instead of in the main drivers menu.

Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] KVM: Add missing include
Anthony Liguori [Wed, 13 Dec 2006 08:33:43 +0000 (00:33 -0800)]
[PATCH] KVM: Add missing include

load_TR_desc() lives in asm/desc.h, so #include that file.

Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] tty: export get_current_tty
Heiko Carstens [Wed, 13 Dec 2006 08:33:41 +0000 (00:33 -0800)]
[PATCH] tty: export get_current_tty

24ec839c431eb79bb8f6abc00c4e1eb3b8c4d517 causes this:

WARNING: "get_current_tty" [drivers/s390/char/fs3270.ko] undefined!

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] arch/i386/kernel/smpboot.c: remove unneeded ifdef
Andrew Morton [Wed, 13 Dec 2006 08:33:40 +0000 (00:33 -0800)]
[PATCH] arch/i386/kernel/smpboot.c: remove unneeded ifdef

#ifdef CONFIG_SMP in a file which isn't compiled in non-SMP kernels.

Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Wed, 13 Dec 2006 02:53:48 +0000 (18:53 -0800)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] kprobe clears qp bits for special instructions
  [IA64] enable trap code on slot 1
  [IA64] Take defensive stance on ia64_pal_get_brand_info()
  [IA64] fix possible XPC deadlock when disconnecting
  [IA64] - Reduce overhead of FP exception logging messages
  [IA64] fix arch/ia64/mm/contig.c:235: warning: unused variable `nid'
  [IA64] s/termios/ktermios/ in simserial.c
  [IA64] kexec/kdump: tidy up declaration of relocate_new_kernel_t
  [IA64] Kexec/Kdump: honour non-zero crashkernel offset.
  [IA64] CONFIG_KEXEC/CONFIG_CRASH_DUMP permutations
  [IA64] Do not call SN_SAL_SET_CPU_NUMBER twice on cpu 0

17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart
Linus Torvalds [Wed, 13 Dec 2006 02:53:04 +0000 (18:53 -0800)]
Merge /pub/scm/linux/kernel/git/davej/agpgart

* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
  [AGPGART] VIA and SiS AGP chipsets are x86-only
  [AGPGART] agp-amd64: section mismatches with HOTPLUG=n
  [AGPGART] Fix up misprogrammed bridges with incorrect AGPv2 rates.

17 years agoMerge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
Linus Torvalds [Wed, 13 Dec 2006 02:52:31 +0000 (18:52 -0800)]
Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IPoIB: Make sure struct ipoib_neigh.queue is always initialized
  IB/iser: Use the new verbs DMA mapping functions
  IB/srp: Use new verbs IB DMA mapping functions
  IPoIB: Use the new verbs DMA mapping functions
  IB/core: Use the new verbs DMA mapping functions
  IB/ipath: Implement new verbs DMA mapping functions
  IB: Add DMA mapping functions to allow device drivers to interpose
  RDMA/cma: Export rdma cm interface to userspace
  RDMA/cma: Add support for RDMA_PS_UDP
  RDMA/cma: Allow early transition to RTS to handle lost CM messages
  RDMA/cma: Report connect info with connect events
  RDMA/cma: Remove unneeded qp_type parameter from rdma_cm
  IB/ipath: Fix IRQ for PCI Express HCAs
  RDMA/amso1100: Fix memory leak in c2_qp_modify()
  IB/iser: Remove unused "write-only" variables
  IB/ipath: Remove unused "write-only" variables
  IB/fmr: ib_flush_fmr_pool() may wait too long

17 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
Linus Torvalds [Wed, 13 Dec 2006 02:51:51 +0000 (18:51 -0800)]
Merge git://git./linux/kernel/git/bunk/trivial

* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
  Fix inotify maintainers entry
  Fix typo in new debug options.
  Jon needs a new shift key.
  fs: Convert kmalloc() + memset() to kzalloc() in fs/.
  configfs.h: Remove dead macro definitions.
  kconfig: Standardize "depends" -> "depends on" in Kconfig files
  e100: replace kmalloc with kcalloc
  um: replace kmalloc+memset with kzalloc
  fix typo in net/ipv4/ip_fragment.c
  include/linux/compiler.h: reject gcc 3 < gcc 3.2
  Kconfig: fix spelling error in config KALLSYMS help text
  Remove duplicate "have to" in comment
  Fix small typo in drivers/serial/icom.c
  Use consistent casing in help message
  EXT{2,3,4}_FS: remove outdated part of the help text

17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Wed, 13 Dec 2006 02:51:36 +0000 (18:51 -0800)]
Merge /linux/kernel/git/wim/linux-2.6-watchdog

* master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] pcwd_usb.c generic HID include file
  [WATCHDOG] watchdog miscdevice patch
  [WATCHDOG] rm9k_wdt: fix interrupt handler arguments
  [WATCHDOG] rm9k_wdt: fix compilation

17 years agoMerge ../linus
Dave Jones [Tue, 12 Dec 2006 23:13:32 +0000 (18:13 -0500)]
Merge ../linus

17 years ago[AGPGART] VIA and SiS AGP chipsets are x86-only
Matthew Wilcox [Mon, 4 Dec 2006 10:43:14 +0000 (03:43 -0700)]
[AGPGART] VIA and SiS AGP chipsets are x86-only

There's no point in troubling the Alpha, IA-64, PowerPC and PARISC
people with SiS and VIA options.  Andrew thinks it helps find bugs,
but there's no evidence of that.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: Dave Jones <davej@redhat.com>
17 years ago[AGPGART] agp-amd64: section mismatches with HOTPLUG=n
Randy Dunlap [Mon, 20 Nov 2006 02:52:28 +0000 (18:52 -0800)]
[AGPGART] agp-amd64: section mismatches with HOTPLUG=n

When CONFIG_HOTPLUG=n, agp_amd64_resume() calls nforce3_agp_init(),
which is __devinit == __init, so has been discarded and is not
usable for resume.

WARNING: drivers/char/agp/amd64-agp.o - Section mismatch: reference to .init.text: from .text between 'agp_amd64_resume' (at offset 0x249) and 'amd64_tlbflush'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Dave Jones <davej@redhat.com>
17 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2...
Wim Van Sebroeck [Tue, 12 Dec 2006 22:48:41 +0000 (23:48 +0100)]
Merge branch 'master' of /linux/kernel/git/wim/linux-2.6-watchdog

17 years agoIPoIB: Make sure struct ipoib_neigh.queue is always initialized
Roland Dreier [Tue, 12 Dec 2006 22:48:18 +0000 (14:48 -0800)]
IPoIB: Make sure struct ipoib_neigh.queue is always initialized

Move the initialization of ipoib_neigh's skb_queue into
ipoib_neigh_alloc(), since commit 2745b5b7 ("IPoIB: Fix skb leak when
freeing neighbour") will make iterate over the skb_queue to free any
packets left over when freeing the ipoib_neigh structure.

This fixes a crash when freeing ipoib_neigh structures allocated in
ipoib_mcast_send(), which otherwise don't have their skb_queue
initialized.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years ago[WATCHDOG] pcwd_usb.c generic HID include file
Wim Van Sebroeck [Tue, 12 Dec 2006 22:46:47 +0000 (23:46 +0100)]
[WATCHDOG] pcwd_usb.c generic HID include file

Now that the generic HID layer created include/linux/hid.h
we can use the HID_REQ_SET_REPORT and HID_DT_REPORT defines
directly from that include file.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
17 years agoMerge ../linus
Dave Jones [Tue, 12 Dec 2006 22:41:41 +0000 (17:41 -0500)]
Merge ../linus

Conflicts:

drivers/cpufreq/cpufreq.c

17 years ago[CPUFREQ] Longhaul - Add support for CN400
Rafa³ Bilski [Thu, 30 Nov 2006 02:47:41 +0000 (03:47 +0100)]
[CPUFREQ] Longhaul - Add support for CN400

Support for CN400 northbridge when ACPI C3 isn't available.
Tested on Epia SP13000. Thanks to Robert for testing it.

Signed-off-by: Rafa³ Bilski <rafalbilski@interia.pl>
Signed-off-by: Dave Jones <davej@redhat.com>
17 years ago[CPUFREQ] Longhaul - fix 200MHz FSB
Rafa³ Bilski [Thu, 30 Nov 2006 02:36:44 +0000 (03:36 +0100)]
[CPUFREQ] Longhaul - fix 200MHz FSB

On board of Epia SP13000 is 10x133Mhz VIA Nehemiah. It is reported
as 10x200MHz. This patch is fixing this issue.

Signed-off-by: Rafa³ Bilski <rafalbilski@interia.pl>
Signed-off-by: Dave Jones <davej@redhat.com>
17 years agoIB/iser: Use the new verbs DMA mapping functions
Ralph Campbell [Tue, 12 Dec 2006 22:31:00 +0000 (14:31 -0800)]
IB/iser: Use the new verbs DMA mapping functions

Convert iSER to use the new verbs DMA mapping functions for kernel
verbs consumers.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoIB/srp: Use new verbs IB DMA mapping functions
Ralph Campbell [Tue, 12 Dec 2006 22:30:55 +0000 (14:30 -0800)]
IB/srp: Use new verbs IB DMA mapping functions

Convert SRP to use the new verbs DMA mapping functions for kernel
verbs consumers.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoIPoIB: Use the new verbs DMA mapping functions
Ralph Campbell [Tue, 12 Dec 2006 22:30:48 +0000 (14:30 -0800)]
IPoIB: Use the new verbs DMA mapping functions

Convert IPoIB to use the new DMA mapping functions
for kernel verbs consumers.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years ago[CPUFREQ] p4-clockmod: fix support for Core
Dominik Brodowski [Tue, 5 Dec 2006 01:39:16 +0000 (20:39 -0500)]
[CPUFREQ] p4-clockmod: fix support for Core

Support for Core CPUs was broken in two ways in speedstep-lib: for x86_64,
we missed a MSR definition; for both x86_64 and i386, the FSB calculation
was wrong by four (it's a quad-pumped bus). Also increase the accuracy
of the calculation.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>
17 years agoIB/core: Use the new verbs DMA mapping functions
Ralph Campbell [Tue, 12 Dec 2006 22:28:30 +0000 (14:28 -0800)]
IB/core: Use the new verbs DMA mapping functions

Convert code in core/ to use the new DMA mapping functions for kernel
verbs consumers.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoIB/ipath: Implement new verbs DMA mapping functions
Ralph Campbell [Tue, 12 Dec 2006 22:28:28 +0000 (14:28 -0800)]
IB/ipath: Implement new verbs DMA mapping functions

This patch implements the interposing DMA mapping functions to allow
support for IOMMUs and remove the dependence on phys_to_virt() and
bus_to_virt().

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoIB: Add DMA mapping functions to allow device drivers to interpose
Ralph Campbell [Tue, 12 Dec 2006 22:27:41 +0000 (14:27 -0800)]
IB: Add DMA mapping functions to allow device drivers to interpose

The QLogic InfiniPath HCAs use programmed I/O instead of HW DMA.
This patch allows a verbs device driver to interpose on DMA mapping
function calls in order to avoid relying on bus_to_virt() and
phys_to_virt() to undo the mappings created by dma_map_single(),
dma_map_sg(), etc.

Signed-off-by: Ralph Campbell <ralph.campbell@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years ago[CPUFREQ] Fix git URL.
Dave Jones [Tue, 12 Dec 2006 22:26:35 +0000 (17:26 -0500)]
[CPUFREQ] Fix git URL.

Signed-off-by: Dave Jones <davej@redhat.com>
17 years ago[CPUFREQ] Fix the bug in duplicate freq elimination code in acpi-cpufreq
Venkatesh Pallipadi [Tue, 14 Nov 2006 01:47:44 +0000 (17:47 -0800)]
[CPUFREQ] Fix the bug in duplicate freq elimination code in acpi-cpufreq

Fix the bug in duplicate states elimination in acpi-cpufreq.

Bug: Due to duplicate state elimiation in the loop earlier, the number
of valid_states can be less than perf->state_count, in which case
freq_table was ending up with some garbage/uninitialized entries
in the table.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
From:  Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>
17 years ago[CPUFREQ] speedstep-centrino should ignore upper performance control bits
Gary Hade [Fri, 10 Nov 2006 19:20:47 +0000 (11:20 -0800)]
[CPUFREQ] speedstep-centrino should ignore upper performance control bits

On some systems there could be bits set in the upper half of
the control value provided by the _PSS object.  These bits are
only relevant for cpufreq drivers that use IO ports which are not
currently supported by the speedstep-centrino driver.  The current
MSR oriented code assumes that upper bits are not set and thus
fails to work correctly when they are.  e.g. the control and status
value equality check failed on the IBM x3650 even though the ACPI
spec allows inequality.

Signed-off-by: Gary Hade <garyhade@us.ibm.com>
Signed-off-by: Dave Jones <davej@redhat.com>
17 years ago[CPUFREQ] Optimize gx-suspmod revision ID fetching
Jean Delvare [Thu, 9 Nov 2006 17:29:35 +0000 (18:29 +0100)]
[CPUFREQ] Optimize gx-suspmod revision ID fetching

We don't need a temporary variable to get the PCI revision ID.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Dave Jones <davej@redhat.com>
17 years ago[IA64] kprobe clears qp bits for special instructions
bibo,mao [Tue, 12 Dec 2006 20:04:42 +0000 (12:04 -0800)]
[IA64] kprobe clears qp bits for special instructions

On IA64 there exists some special instructions which
always need to be executed regradless of qp bits, such
as com.crel.unc, tbit.trel.unc etc.
This patch clears qp bits when inserting kprobe trap code
and disables probepoint on slot 1 for these special
instructions.

Signed-off-by: bibo,mao <bibo.mao@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
17 years ago[IA64] enable trap code on slot 1
Tony Luck [Tue, 14 Nov 2006 17:33:38 +0000 (09:33 -0800)]
[IA64] enable trap code on slot 1

Because slot 1 of one instr bundle crosses border of two consecutive
8-bytes, kprobe on slot 1 is disabled. This patch enables kprobe on
slot1, it only replaces higher 8-bytes of the instruction bundle and
changes the exception code to ignore the low 12 bits of the break
number (which is across the border in the lower 8-bytes of the bundle).

For those instructions which must execute regardless qp bits,
kprobe on slot 1 is still disabled.

Signed-off-by: bibo,mao <bibo.mao@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
17 years ago[IA64] Take defensive stance on ia64_pal_get_brand_info()
Tony Luck [Tue, 12 Dec 2006 19:56:36 +0000 (11:56 -0800)]
[IA64] Take defensive stance on ia64_pal_get_brand_info()

Stephane thought he saw a problem here (but was just confused
by the return value from ia64_pal_get_brand_info()).  But we
should be more defensive here in case an prototype PAL for
a future processor doesn't implement this PAL call.

Signed-off-by: Tony Luck <tony.luck@intel.com>
17 years agoRDMA/cma: Export rdma cm interface to userspace
Sean Hefty [Fri, 1 Dec 2006 00:53:41 +0000 (16:53 -0800)]
RDMA/cma: Export rdma cm interface to userspace

Export the rdma cm interfaces to userspace via a misc device.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoRDMA/cma: Add support for RDMA_PS_UDP
Sean Hefty [Fri, 1 Dec 2006 00:44:16 +0000 (16:44 -0800)]
RDMA/cma: Add support for RDMA_PS_UDP

Allow the use of UD QPs through the rdma_cm, in order to provide
address translation services for resolving IB addresses for datagram
messages using SIDR.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoRDMA/cma: Allow early transition to RTS to handle lost CM messages
Sean Hefty [Fri, 1 Dec 2006 00:37:15 +0000 (16:37 -0800)]
RDMA/cma: Allow early transition to RTS to handle lost CM messages

During connection establishment, the passive side of a connection can
receive messages from the active side before the connection event has
been delivered to the user.  Allow the passive side to send messages
in response to received data before the event is delivered.  To handle
the case where the connection messages are lost, a new rdma_notify()
function is added that users may invoke to force a connection into the
established state.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoRDMA/cma: Report connect info with connect events
Sean Hefty [Fri, 1 Dec 2006 00:33:14 +0000 (16:33 -0800)]
RDMA/cma: Report connect info with connect events

Connection information was never given to the recipient of a
connection request or reply message.  Only the event was delivered.
Report the connection data with the event to allows user to
reject the connection based on the requested parameters, or adjust
their resources to match the request.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoRDMA/cma: Remove unneeded qp_type parameter from rdma_cm
Sean Hefty [Fri, 1 Dec 2006 00:30:47 +0000 (16:30 -0800)]
RDMA/cma: Remove unneeded qp_type parameter from rdma_cm

The qp_type parameter into the rdma_cm is unneeded, and can be
misleading.  The QP type should be determined from the port space.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoIB/ipath: Fix IRQ for PCI Express HCAs
Roland Dreier [Tue, 12 Dec 2006 19:50:20 +0000 (11:50 -0800)]
IB/ipath: Fix IRQ for PCI Express HCAs

Commit 51f65ebc ("IB/ipath - program intconfig register using new HT
irq hook"), which fixed interrupts for HyperTransport HCAs, broke PCI
Express HCAs, because for those HCAs, the driver uses the value of
pdev->irq before pci_enable_msi() and ends up getting a totally bogus
IRQ number.  Fix this by using the value of pdev->irq after
pci_enable_msi().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoRDMA/amso1100: Fix memory leak in c2_qp_modify()
Krishna Kumar [Mon, 4 Dec 2006 03:44:57 +0000 (09:14 +0530)]
RDMA/amso1100: Fix memory leak in c2_qp_modify()

vq_req is leaked in error cases.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoIB/iser: Remove unused "write-only" variables
Roland Dreier [Tue, 12 Dec 2006 19:50:20 +0000 (11:50 -0800)]
IB/iser: Remove unused "write-only" variables

Remove variables that are set but then never looked at in the iSER
initiator.  These cleanups came from David Binderman's list of "set
but never used" warnings from icc.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoIB/ipath: Remove unused "write-only" variables
Roland Dreier [Tue, 12 Dec 2006 19:50:20 +0000 (11:50 -0800)]
IB/ipath: Remove unused "write-only" variables

Remove variables that are set but then never looked at in the ipath
driver.  These cleanups came from David Binderman's list of "set but
never used" warnings from icc.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoIB/fmr: ib_flush_fmr_pool() may wait too long
Roland Dreier [Tue, 12 Dec 2006 19:50:19 +0000 (11:50 -0800)]
IB/fmr: ib_flush_fmr_pool() may wait too long

ib_flush_fmr_pool() stashes away the request generation number
properly, but then goes ahead and rereads it every time it tests
whether the flush generation number has caught up.  This means that
there is a theoretical possibility of livelock, if the request
generation number keeps getting bumped and the flush generation number
never catches up.  The fix is simple: use the request generation
number read at the beginning of the function.

Also, atomic_inc() followed by atomic_read() can be replaced with
atomic_int_return().  There's no real requirement for atomicity here
but we might as well shrink the code.

This bug was discovered using David Binderman's list of "set but never
used" warnings from icc.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years ago[IA64] fix possible XPC deadlock when disconnecting
Dean Nelson [Wed, 22 Nov 2006 14:25:00 +0000 (08:25 -0600)]
[IA64] fix possible XPC deadlock when disconnecting

This patch eliminates a potential deadlock that is possible when XPC
disconnects a channel to a partition that has gone down. This deadlock will
occur if at least one of the kthreads created by XPC for the purpose of making
callouts to the channel's registerer is detained in the registerer and will
not be returning back to XPC until some registerer request occurs on the now
downed partition. The potential for a deadlock is removed by ensuring that
there always is a kthread available to make the channel disconnecting callout
to the registerer.

Signed-off-by: Dean Nelson <dcn@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
17 years ago[IA64] - Reduce overhead of FP exception logging messages
Jack Steiner [Wed, 22 Nov 2006 15:55:08 +0000 (09:55 -0600)]
[IA64] - Reduce overhead of FP exception logging messages

Improve the scalability of the fpswa code that rate-limits
logging of messages.

There are 2 distinctly different problems in this code.

1) If prctl is used to disable logging, last_time is never
   updated. The result is that fpu_swa_count is zeroed out on
   EVERY fp fault. This causes a very very hot cache line.
   The fix reduces the wallclock time of a 1024p FP exception test
   from 28734 sec to 19 sec!!!

2) On VERY large systems, excessive messages are logged because
   multiple cpus can each reset or increment fpu_swa_count at
   about the same time. The result is that hundreds of messages
   are logged each second. The fixes reduces the logging rate
   to ~1 per second.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
17 years ago[IA64] fix arch/ia64/mm/contig.c:235: warning: unused variable `nid'
Tony Luck [Tue, 12 Dec 2006 19:18:55 +0000 (11:18 -0800)]
[IA64] fix arch/ia64/mm/contig.c:235: warning: unused variable `nid'

This warning only shows up with CONFIG_VIRTUAL_MEM_MAP=y and
CONFIG_FLATMEM=y.

There is only one caller left for register_active_ranges() from the
contig.c code ... so it doesn't need to pick up the node number, the
node number is always zero.

Signed-off-by: Tony Luck <tony.luck@intel.com>
17 years agoFix inotify maintainers entry
Cal Peake [Tue, 12 Dec 2006 19:18:16 +0000 (20:18 +0100)]
Fix inotify maintainers entry

Update the inotify entry in MAINTAINERS to be consistent with the rest of
the file.

Signed-off-by: Cal Peake <cp@absolutedigital.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
17 years agoFix typo in new debug options.
Dave Jones [Tue, 12 Dec 2006 19:16:36 +0000 (20:16 +0100)]
Fix typo in new debug options.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
17 years agoJon needs a new shift key.
Dave Jones [Tue, 12 Dec 2006 19:15:40 +0000 (20:15 +0100)]
Jon needs a new shift key.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
17 years agofs: Convert kmalloc() + memset() to kzalloc() in fs/.
Robert P. J. Day [Tue, 12 Dec 2006 19:07:35 +0000 (20:07 +0100)]
fs: Convert kmalloc() + memset() to kzalloc() in fs/.

Convert the single available instance of kmalloc() + memset() to
kzalloc() in the fs/ directory.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
17 years agoconfigfs.h: Remove dead macro definitions.
Robert P. J. Day [Tue, 12 Dec 2006 19:05:50 +0000 (20:05 +0100)]
configfs.h: Remove dead macro definitions.

Delete the __ATTR-related macro definitions since these are now
defined in include/linux/sysfs.h.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
17 years agokconfig: Standardize "depends" -> "depends on" in Kconfig files
Robert P. J. Day [Tue, 12 Dec 2006 19:04:19 +0000 (20:04 +0100)]
kconfig: Standardize "depends" -> "depends on" in Kconfig files

Standardize the miniscule percentage of occurrences of "depends" in
Kconfig files to "depends on", and update kconfig-language.txt to
reflect that.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
17 years agoe100: replace kmalloc with kcalloc
Yan Burman [Tue, 12 Dec 2006 19:03:10 +0000 (20:03 +0100)]
e100: replace kmalloc with kcalloc

Replace kmalloc+memset with kcalloc

Signed-off-by: Yan Burman <burman.yan@gmail.com>
Acked-By: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
17 years agoum: replace kmalloc+memset with kzalloc
Yan Burman [Tue, 12 Dec 2006 18:54:52 +0000 (19:54 +0100)]
um: replace kmalloc+memset with kzalloc

Replace kmalloc+memset with kzalloc

Signed-off-by: Yan Burman <burman.yan@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
17 years agofix typo in net/ipv4/ip_fragment.c
Peter Zijlstra [Tue, 12 Dec 2006 18:48:59 +0000 (19:48 +0100)]
fix typo in net/ipv4/ip_fragment.c

Signed-off-by: Adrian Bunk <bunk@stusta.de>
17 years ago[IA64] s/termios/ktermios/ in simserial.c
Tony Luck [Tue, 12 Dec 2006 18:47:36 +0000 (10:47 -0800)]
[IA64] s/termios/ktermios/ in simserial.c

This got missed in 606d099cdd1080bbb50ea50dc52d98252f8f10a1

Signed-off-by: Tony Luck <tony.luck@intel.com>
17 years ago[PATCH] remove config ordering/dependency between ucb1400-ts and sound subsystem
Nicolas Pitre [Tue, 12 Dec 2006 18:32:29 +0000 (13:32 -0500)]
[PATCH] remove config ordering/dependency between ucb1400-ts and sound subsystem

Commit 2d4ba4a3b9aef95d328d74a17ae84f8d658059e2 introduced a dependency
that was never meant to exist when the ac97_bus.c module was created.
Move ac97_bus.c up the directory hierarchy to make sure it is built when
selected even if sound is configured out so things work as originally
intended.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years agoinclude/linux/compiler.h: reject gcc 3 < gcc 3.2
Alistair John Strachan [Tue, 12 Dec 2006 18:28:50 +0000 (19:28 +0100)]
include/linux/compiler.h: reject gcc 3 < gcc 3.2

The kernel doesn't compile with GCC <3.2, do not allow it to succeed if GCC
3.0.x or 3.1.x are used.

Signed-off-by: Alistair John Strachan <s0348365@sms.ed.ac.uk>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
17 years agoKconfig: fix spelling error in config KALLSYMS help text
Jesper Juhl [Tue, 12 Dec 2006 18:25:11 +0000 (19:25 +0100)]
Kconfig: fix spelling error in config KALLSYMS help text

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Acked-By: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
17 years agoRemove duplicate "have to" in comment
Rolf Eike Beer [Tue, 12 Dec 2006 18:23:02 +0000 (19:23 +0100)]
Remove duplicate "have to" in comment

Introduced in commit 7cc13edc139108bb527b692f0548dce6bc648572.

Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
17 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfashe...
Linus Torvalds [Tue, 12 Dec 2006 18:21:01 +0000 (10:21 -0800)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  [patch 3/3] OCFS2 Configurable timeouts - Protocol changes
  [patch 2/3] OCFS2 Configurable timeouts
  [patch 1/3] OCFS2 - Expose struct o2nm_cluster
  ocfs2: Synchronize feature incompat flags in ocfs2_fs.h
  ocfs2: update mount option documentation
  ocfs2: local mounts

17 years agoFix small typo in drivers/serial/icom.c
Thomas Hisch [Tue, 12 Dec 2006 18:20:35 +0000 (19:20 +0100)]
Fix small typo in drivers/serial/icom.c

Signed-off-by: Thomas Hisch <t.hisch@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
17 years ago[IA64] kexec/kdump: tidy up declaration of relocate_new_kernel_t
Horms [Tue, 12 Dec 2006 09:06:13 +0000 (18:06 +0900)]
[IA64] kexec/kdump: tidy up declaration of relocate_new_kernel_t

* Make NORET_TYPE and ATTRIB_NORET in line with the
  declaration for other architectures
* Add parameter names

Signed-Off-By: Simon Horman <horms@verge.net.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
17 years ago[IA64] Kexec/Kdump: honour non-zero crashkernel offset.
Horms [Tue, 12 Dec 2006 09:08:10 +0000 (18:08 +0900)]
[IA64] Kexec/Kdump: honour non-zero crashkernel offset.

There seems to be a value in both allowing the kernel to determine
the base offset of the crashkernel automatically and allowing
users's to sepcify it.

The old behaviour on ia64, which is still the current behaviour on
most architectures is for the user to always specify the address.
Recently ia64 was changed so that it is always automatically determined.

With this patch the kernel automatically determines the offset if
the supplied value is 0, otherwise it uses the value provided.

This should probably be backed by a documentation change.

Signed-Off-By: Simon Horman <horms@verge.net.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
17 years ago[IA64] CONFIG_KEXEC/CONFIG_CRASH_DUMP permutations
Horms [Tue, 12 Dec 2006 08:49:03 +0000 (17:49 +0900)]
[IA64] CONFIG_KEXEC/CONFIG_CRASH_DUMP permutations

Actually, on reflection I think that there is a good case for
keeping the options separate. I am thinking particularly of people
who want a very small crashdump kernel and thus don't want to compile
in kexec.

The patch below should fix things up so that all valid combinations of
KEXEC, CRASH_DUMP and VMCORE compile cleanly - VMCORE depends on
CRASH_DUMP which is why I said valid combinations. In a nutshell
it just untangles unrelated code and switches around a few defines.

Please note that it creats a new file, arch/ia64/kernel/crash_dump.c
This is in keeping with the i386 implementation.

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
17 years agoUse consistent casing in help message
Samuel Tardieu [Tue, 12 Dec 2006 18:09:40 +0000 (19:09 +0100)]
Use consistent casing in help message

Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
17 years ago[IA64] Do not call SN_SAL_SET_CPU_NUMBER twice on cpu 0
Jay Lan [Mon, 11 Dec 2006 23:39:23 +0000 (15:39 -0800)]
[IA64] Do not call SN_SAL_SET_CPU_NUMBER twice on cpu 0

This is an SN specific patch.

Architectually, cpu_init is always called twice on cpu 0
and thus resulted in two SN_SAL_SET_CPU_NUMBER calls.

This was harmless in production kernel; however, it can
cause problem on booting up a crashdump kernel at Altix.

Here is the patch that detects the second sn_cpu_init
call and skips the second call to SN_SAL_SET_CPU_NUMBER.

Signed-Off-By: Jay Lan <jlan@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
17 years agoEXT{2,3,4}_FS: remove outdated part of the help text
Jan Engelhardt [Tue, 12 Dec 2006 18:07:45 +0000 (19:07 +0100)]
EXT{2,3,4}_FS: remove outdated part of the help text

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Acked-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
17 years agoMerge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
Linus Torvalds [Tue, 12 Dec 2006 17:57:55 +0000 (09:57 -0800)]
Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: Fix OMAP clock prescaler to match the comment
  i2c: Refactor a kfree in i2c-dev
  i2c: Fix return value check in i2c-dev
  i2c: Enable PEC on more i2c-i801 devices
  i2c: Discard the i2c algo del_bus wrappers
  i2c: New ARM Versatile/Realview bus driver
  i2c: fix broken ds1337 initialization
  i2c: i2c-i801 documentation update
  i2c: Use the __ATTR macro where possible
  i2c: Whitespace cleanups
  i2c: Use put_user instead of copy_to_user where possible
  i2c: New Atmel AT91 bus driver
  i2c: Add support for nested i2c bus locking
  i2c: Cleanups to the i2c-nforce2 bus driver
  i2c: Add request/release_mem_region to i2c-ibm_iic bus driver
  i2c: New Philips PNX bus driver
  i2c: Delete the broken i2c-ite bus driver
  i2c: Update the list of driver IDs
  i2c: Fix documentation typos

17 years ago[PATCH] netpoll: fix netpoll lockup
Ingo Molnar [Tue, 12 Dec 2006 16:20:42 +0000 (17:20 +0100)]
[PATCH] netpoll: fix netpoll lockup

current -git doesnt boot on my laptop due to netpoll not unlocking the
tx lock in the else branch.

booted this up on my laptop with lockdep enabled and there are no
locking complaints and it works fine.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
Linus Torvalds [Tue, 12 Dec 2006 16:14:46 +0000 (08:14 -0800)]
Merge /pub/scm/linux/kernel/git/lethal/sh-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (29 commits)
  sh: Fixup SH-2 BUG() trap handling.
  sh: Use early_param() for earlyprintk parsing.
  sh: Fix .empty_zero_page alignment for PAGE_SIZE > 4096.
  sh: Fixup .data.page_aligned.
  sh: Hook up SH7722 scif ipr interrupts.
  sh: Fixup sh_bios() trap handling.
  sh: SH-MobileR SH7722 CPU support.
  sh: Fixup dma_cache_sync() callers.
  sh: Convert remaining remap_area_pages() users to ioremap_page_range().
  sh: Fixup kernel_execve() for syscall cleanups.
  sh: Fix get_wchan().
  sh: BUG() handling through trapa vector.
  rtc: rtc-sh: alarm support.
  rtc: rtc-sh: fix rtc for out-by-one for the month.
  sh: Kill off unused SE7619 I/O ops.
  serial: sh-sci: Shut up various sci_rxd_in() gcc4 warnings.
  sh: Split out atomic ops logically.
  sh: Fix Solution Engine 7619 build.
  sh: Trivial build fixes for SH-2 support.
  sh: IPR IRQ updates for SH7619/SH7206.
  ...

17 years ago[PATCH] net, 8139too.c: fix netpoll deadlock
Ingo Molnar [Tue, 12 Dec 2006 12:49:35 +0000 (13:49 +0100)]
[PATCH] net, 8139too.c: fix netpoll deadlock

fix deadlock in the 8139too driver: poll handlers should never forcibly
enable local interrupts, because they might be used by netpoll/printk
from IRQ context.

  =================================
  [ INFO: inconsistent lock state ]
  2.6.19 #11
  ---------------------------------
  inconsistent {softirq-on-W} -> {in-softirq-W} usage.
  swapper/1 [HC0[0]:SC1[1]:HE1:SE0] takes:
   (&npinfo->poll_lock){-+..}, at: [<c0350a41>] net_rx_action+0x64/0x1de
  {softirq-on-W} state was registered at:
    [<c0134c86>] mark_lock+0x5b/0x39c
    [<c0135012>] mark_held_locks+0x4b/0x68
    [<c01351e9>] trace_hardirqs_on+0x115/0x139
    [<c02879e6>] rtl8139_poll+0x3d7/0x3f4
    [<c035c85d>] netpoll_poll+0x82/0x32f
    [<c035c775>] netpoll_send_skb+0xc9/0x12f
    [<c035cdcc>] netpoll_send_udp+0x253/0x25b
    [<c0288463>] write_msg+0x40/0x65
    [<c011cead>] __call_console_drivers+0x45/0x51
    [<c011cf16>] _call_console_drivers+0x5d/0x61
    [<c011d4fb>] release_console_sem+0x11f/0x1d8
    [<c011d7d7>] register_console+0x1ac/0x1b3
    [<c02883f8>] init_netconsole+0x55/0x67
    [<c010040c>] init+0x9a/0x24e
    [<c01049cf>] kernel_thread_helper+0x7/0x10
    [<ffffffff>] 0xffffffff
  irq event stamp: 819992
  hardirqs last  enabled at (819992): [<c0350a16>] net_rx_action+0x39/0x1de
  hardirqs last disabled at (819991): [<c0350b1e>] net_rx_action+0x141/0x1de
  softirqs last  enabled at (817552): [<c01214e4>] __do_softirq+0xa3/0xa8
  softirqs last disabled at (819987): [<c0106051>] do_softirq+0x5b/0xc9

  other info that might help us debug this:
  no locks held by swapper/1.

  stack backtrace:
   [<c0104d88>] dump_trace+0x63/0x1e8
   [<c0104f26>] show_trace_log_lvl+0x19/0x2e
   [<c010532d>] show_trace+0x12/0x14
   [<c0105343>] dump_stack+0x14/0x16
   [<c0134980>] print_usage_bug+0x23c/0x246
   [<c0134d33>] mark_lock+0x108/0x39c
   [<c01356a7>] __lock_acquire+0x361/0x9ed
   [<c0136018>] lock_acquire+0x56/0x72
   [<c03aff1f>] _spin_lock+0x35/0x42
   [<c0350a41>] net_rx_action+0x64/0x1de
   [<c0121493>] __do_softirq+0x52/0xa8
   [<c0106051>] do_softirq+0x5b/0xc9
   [<c0121338>] irq_exit+0x3c/0x48
   [<c0106163>] do_IRQ+0xa4/0xbd
   [<c01047c6>] common_interrupt+0x2e/0x34
   [<c011db92>] vprintk+0x2c0/0x309
   [<c011dbf6>] printk+0x1b/0x1d
   [<c01003f2>] init+0x80/0x24e
   [<c01049cf>] kernel_thread_helper+0x7/0x10
   =======================

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years ago[PATCH] lockdep: fix seqlock_init()
Ingo Molnar [Tue, 12 Dec 2006 11:10:28 +0000 (12:10 +0100)]
[PATCH] lockdep: fix seqlock_init()

seqlock_init() needs to use spin_lock_init() for dynamic locks, so that
lockdep is notified about the presence of a new lock.

(this is a fallout of the recent networking merge, which started using
the so-far unused seqlock_init() API.)

This fix solves the following lockdep-internal warning on current -git:

 INFO: trying to register non-static key.
 the code is fine but needs lockdep annotation.
 turning off the locking correctness validator.
     __lock_acquire+0x10c/0x9f9
     lock_acquire+0x56/0x72
     _spin_lock+0x35/0x42
     neigh_destroy+0x9d/0x12e
     neigh_periodic_timer+0x10a/0x15c
     run_timer_softirq+0x126/0x18e
     __do_softirq+0x6b/0xe6
     do_softirq+0x64/0xd2
     ksoftirqd+0x82/0x138

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
17 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb
Linus Torvalds [Tue, 12 Dec 2006 16:01:50 +0000 (08:01 -0800)]
Merge branch 'master' of /linux/kernel/git/mchehab/v4l-dvb

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (4954): Fix: On ia64, i2c adap->inb/adap->outb are wrongly evaluated

17 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy...
Linus Torvalds [Tue, 12 Dec 2006 15:45:48 +0000 (07:45 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/shaggy/jfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  JFS: Fix conflicting superblock flags

17 years agoV4L/DVB (4954): Fix: On ia64, i2c adap->inb/adap->outb are wrongly evaluated
Mauro Carvalho Chehab [Mon, 11 Dec 2006 08:37:14 +0000 (05:37 -0300)]
V4L/DVB (4954): Fix: On ia64, i2c adap->inb/adap->outb are wrongly evaluated

i2c defines two callbacks (inb/outb). On ia64, since it defines also two macros
with those names, it causes the following errors:
drivers/media/video/usbvision/usbvision-i2c.c:64:39: macro "outb" passed 4 arguments, but takes just 2
drivers/media/video/usbvision/usbvision-i2c.c: In function `try_write_address':
drivers/media/video/usbvision/usbvision-i2c.c:64: warning: assignment makes integer from pointer without a cast
drivers/media/video/usbvision/usbvision-i2c.c:89:38: macro "inb" passed 4 arguments, but takes just 1
drivers/media/video/usbvision/usbvision-i2c.c: In function `try_read_address':
drivers/media/video/usbvision/usbvision-i2c.c:89: warning: assignment makes integer from pointer without a cast
drivers/media/video/usbvision/usbvision-i2c.c:85: warning: unused variable `buf'
drivers/media/video/usbvision/usbvision-i2c.c:173:53: macro "inb" passed 4 arguments, but takes just 1
drivers/media/video/usbvision/usbvision-i2c.c: In function `usb_xfer':
drivers/media/video/usbvision/usbvision-i2c.c:173: warning: assignment makes integer from pointer without a cast
drivers/media/video/usbvision/usbvision-i2c.c:179:54: macro "outb" passed 4 arguments, but takes just 2
drivers/media/video/usbvision/usbvision-i2c.c:179: warning: assignment makes integer from pointer without a cast
thanks to Andrew Morton for pointing this.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years ago[PATCH] remove unnecessary blk_queue_bounce in SG_IO
FUJITA Tomonori [Tue, 12 Dec 2006 09:26:55 +0000 (10:26 +0100)]
[PATCH] remove unnecessary blk_queue_bounce in SG_IO

When I converted the original patch, I left unnecessary blk_queue_bounce in
SG_IO.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years ago[PATCH] fix SG_IO bio leak
FUJITA Tomonori [Mon, 11 Dec 2006 09:01:34 +0000 (10:01 +0100)]
[PATCH] fix SG_IO bio leak

This patch fixes bio leaks in SG_IO. rq->bio can be changed after io
completion, so we need to reset rq->bio before calling blk_rq_unmap_user()

http://marc.theaimsgroup.com/?l=linux-kernel&m=116570666807983&w=2

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years ago[PATCH] remove blk_queue_activity_fn
Boaz Harrosh [Tue, 5 Dec 2006 09:19:14 +0000 (10:19 +0100)]
[PATCH] remove blk_queue_activity_fn

While working on bidi support at struct request level
I have found that blk_queue_activity_fn is actually never used.
The only user is in ide-probe.c with this code:

/* enable led activity for disk drives only */
if (drive->media == ide_disk && hwif->led_act)
blk_queue_activity_fn(q, hwif->led_act, drive);

And led_act is never initialized anywhere.
(Looking back at older kernels it was used in the PPC arch, but was removed around 2.6.18)
Unless it is all for future use off course.
(this patch is against linux-2.6-block.git as off 2006/12/4)

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Tue, 12 Dec 2006 02:35:17 +0000 (18:35 -0800)]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (32 commits)
  [NETPOLL]: Fix local_bh_enable() warning.
  [IPVS]: Make ip_vs_sync.c <= 80col wide.
  [IPVS]: Use msleep_interruptable() instead of ssleep() aka msleep()
  [HAMRADIO]: Fix baycom_epp.c compile failure.
  [DCCP]: Whitespace cleanups
  [DCCP] ccid3: Fixup some type conversions related to rtts
  [DCCP] ccid3: BUG-FIX - conversion errors
  [DCCP] ccid3: Reorder packet history source file
  [DCCP] ccid3: Reorder packet history header file
  [DCCP] ccid3: Make debug output consistent
  [DCCP] ccid3: Perform history operations only after packet has been sent
  [DCCP] ccid3: TX history - remove unused field
  [DCCP] ccid3: Shift window counter computation
  [DCCP] ccid3: Sanity-check RTT samples
  [DCCP] ccid3: Initialise RTT values
  [DCCP] ccid: Deprecate ccid_hc_tx_insert_options
  [DCCP]: Warn when discarding packet due to internal errors
  [DCCP]: Only deliver to the CCID rx side in charge
  [DCCP]: Simplify TFRC calculation
  [DCCP]: Debug timeval operations
  ...

17 years agoMerge branch 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32
Linus Torvalds [Tue, 12 Dec 2006 02:28:59 +0000 (18:28 -0800)]
Merge branch 'for-linus' of git://atmel.no/~hskinnemoen/linux/kernel/avr32

* 'for-linus' of git://www.atmel.no/~hskinnemoen/linux/kernel/avr32:
  [AVR32] Add missing #include <linux/param.h> to delay.c
  [AVR32] Pass dev parameter to dma_cache_sync()
  [AVR32] Implement intc_get_pending()
  [AVR32] Don't include <asm/delay.h>
  [AVR32] Put the chip in "stop" mode when halting the system
  [AVR32] Set flow handler for external interrupts
  [AVR32] Remove unused file
  [AVR32] Remove mii_phy_addr and eth_addr from eth_platform_data
  [AVR32] Move ethernet tag parsing to board-specific code
  [AVR32] Add macb1 platform_device
  [AVR32] Portmux API update

17 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Tue, 12 Dec 2006 02:24:58 +0000 (18:24 -0800)]
Merge git://git./linux/kernel/git/paulus/powerpc

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (36 commits)
  [POWERPC] Generic BUG for powerpc
  [PPC] Fix compile failure do to introduction of PHY_POLL
  [POWERPC] Only export __mtdcr/__mfdcr if CONFIG_PPC_DCR is set
  [POWERPC] Remove old dcr.S
  [POWERPC] Fix SPU coredump code for max_fdset removal
  [POWERPC] Fix irq routing on some 32-bit PowerMacs
  [POWERPC] ps3: Add vuart support
  [POWERPC] Support ibm,dynamic-reconfiguration-memory nodes
  [POWERPC] dont allow pSeries_probe to succeed without initialising MMU
  [POWERPC] micro optimise pSeries_probe
  [POWERPC] Add SPURR SPR to sysfs
  [POWERPC] Add DSCR SPR to sysfs
  [POWERPC] Fix 440SPe CPU table entry
  [POWERPC] Add support for FP emulation for the e300c2 core
  [POWERPC] of_device_register: propagate device_create_file return code
  [POWERPC] Fix mmap of PCI resource with hack for X
  [POWERPC] iSeries: head_64.o needs to depend on lparmap.s
  [POWERPC] cbe_thermal: Fix initialization of sysfs attribute_group
  [POWERPC] Remove QE header files from lite5200.c
  [POWERPC] of_platform_make_bus_id(): make `magic' int
  ...

17 years ago[MIPS] paging_init(): use highend_pfn/highstart_pfn
Franck Bui-Huu [Wed, 6 Dec 2006 15:48:28 +0000 (16:48 +0100)]
[MIPS] paging_init(): use highend_pfn/highstart_pfn

This patch makes paging_init() use highend_pfn/highstart_pfn globals.

It removes the need of 'high' local which was needed only by HIGHMEM config.

More important perhaps, it fixes a bug when HIGHMEM is set but there's
actually no physical highmem (highend_pfn = 0)

Signed-off-by: Franck Bui-Huu <fbuihuu@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>