Arun Kumar K [Mon, 19 May 2014 12:33:03 +0000 (09:33 -0300)]
[media] s5p-mfc: Update scratch buffer size for MPEG4
Update the MPEG4 decoder scratch buffer size as per the
new v6 firmware. This updation is increasing the size and so
is backward compatible with older v6 firmwares.
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Pawel Osciak [Mon, 19 May 2014 12:33:02 +0000 (09:33 -0300)]
[media] s5p-mfc: Don't try to resubmit VP8 bitstream buffer for decode
Currently, for formats that are not H264, MFC driver will check
the consumed stream size returned by the firmware and, based on that,
will try to decide whether the bitstream buffer contained more than
one frame. If the size of the buffer is larger than the consumed
stream, it assumes that there are more frames in the buffer and that the
buffer should be resubmitted for decode. This rarely works though and
actually introduces problems, because:
- v7 firmware will always return consumed stream size equal to whatever
the driver passed to it when running decode (which is the size of the whole
buffer), which means we will never try to resubmit, because the firmware
will always tell us that it consumed all the data we passed to it;
- v6 firmware will return the number of consumed bytes, but will not
include the padding ("stuffing") bytes that are allowed after the frame
in VP8. Since there is no way of figuring out how many of those bytes
follow the frame without getting the frame size from IVF headers (or
somewhere else, but not from the stream itself), the driver tries to guess that
padding size is not larger than 4 bytes, which is not always true;
The only way to make it work is to queue only one frame per buffer from
userspace and the check in the kernel is useless and wrong for VP8.
So adding VP8 also along with H264 to disallow re-submitting of buffer
back to hardware for decode.
Signed-off-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Kiran AVND [Mon, 19 May 2014 12:33:01 +0000 (09:33 -0300)]
[media] s5p-mfc: Update scratch buffer size for VP8 encoder
Scratch buffer size updated for vp8 encoding as per
the latest v7 firmware. As the new macro increases the
scratch buffer size, it is backward compatible with the older
firmware too.
Signed-off-by: Kiran AVND <avnd.kiran@samsung.com>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Pawel Osciak [Mon, 19 May 2014 12:33:00 +0000 (09:33 -0300)]
[media] s5p-mfc: Don't allocate codec buffers on STREAMON
Currently, we allocate private codec buffers on STREAMON, which may fail
if we are out of memory. We don't check for failure though, which will
make us crash with the codec accessing random memory.
We shouldn't be failing STREAMON with out of memory errors though. So move
the allocation of private codec buffers to REQBUFS for OUTPUT queue. Also,
move MFC instance opening and closing to REQBUFS as well, as it's tied to
allocation and deallocation of private codec buffers.
Signed-off-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Pawel Osciak [Mon, 19 May 2014 12:32:59 +0000 (09:32 -0300)]
[media] s5p-mfc: Extract open/close MFC instance commands
This is in preparation for a new flow to fix issues with streamon, which
should not be allocating buffer memory.
Signed-off-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Pawel Osciak [Mon, 19 May 2014 12:32:58 +0000 (09:32 -0300)]
[media] s5p-mfc: Fixes for decode REQBUFS
- Honor return values from vb2_reqbufs on REQBUFS(0).
- Do not set the number of allocated buffers to 0 if userspace tries
to request buffers again without freeing them.
- There is no need to verify correct instance state on reqbufs, as we will
verify this in queue_setup().
- There is also no need to verify that vb2_reqbufs() was able to allocate enough
buffers (pb_count) and call buf_init on that many buffers (i.e. dst_buf_count
is at least pb_count), because this will be verified by second queue_setup()
call as well and vb2_reqbufs() will fail otherwise.
- Only verify state is MFCINST_INIT when allocating, not when freeing.
- Refactor and simplify code.
Signed-off-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Pawel Osciak [Mon, 19 May 2014 12:32:57 +0000 (09:32 -0300)]
[media] s5p-mfc: Copy timestamps only when a frame is produced
Timestamps for destination buffers are assigned by copying them from
corresponding source buffers when the decode operation results in a frame
being outputted to a destination buffer. But the decision when to do this, i.e.
whether the decode operation on current source buffer produced a destination
frame, is wrongly based on "display status". Display status reflects the status
of the destination buffer, not source.
This used to work for firmwares version <= 6, because in addition to the above,
we'd check the decoded frame type register, which was set to "skipped" if
a destination frame was not produced, exiting early from
s5p_mfc_handle_frame_new().
Firmware >=7 does not set the frame type register for frames that were not
decoded anymore though, which results in us wrongly overwriting timestamps of
previously decoded buffers (firmware reports the same destination buffer address
as previously decoded one if a frame wasn't decoded during current operation).
To do it properly, we should be basing our decision to copy the timestamp on the
status of the source buffer, i.e. "decode status". The decode status register
values are confusing, because in its case "display" means "a frame has been
outputted to a destination buffer". We should copy if "decode and display"
is returned in it. This also works on <= v6 firmware, which behaves in the same
way with regards to decode status register.
Signed-off-by: Pawel Osciak <posciak@chromium.org>
Signed-off-by: Arun Kumar K <arun.kk@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Alexander Shiyan [Fri, 2 May 2014 07:18:01 +0000 (04:18 -0300)]
[media] media: mx2-emmaprp: Add missing mutex_destroy()
This patch adds the missing mutex_destroy(), when the driver is removed.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Alexander Shiyan [Fri, 2 May 2014 07:18:00 +0000 (04:18 -0300)]
[media] media: mx2-emmaprp: Cleanup internal structure
There are no need to store resource struct and IRQ in the driver
internal structure.
This patch remove these fields and improve error handling by using
proper return codes from devm_ioremap_resource() and devm_request_irq().
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
John Sheu [Tue, 11 Mar 2014 22:52:02 +0000 (19:52 -0300)]
[media] s5p-mfc: fix encoder crash after VIDIOC_STREAMOFF
VIDIOC_STREAMOFF clears the encoder's destination queue -- routines run
from the interrupt handler cannot assume that the queue is non-empty.
Signed-off-by: John Sheu <sheu@google.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Thu, 8 May 2014 13:03:37 +0000 (10:03 -0300)]
[media] mt9p031: Fix BLC configuration restore when disabling test pattern
Auto BLC and BLC digital offset are disabled when enabling the test
pattern and must be restored when disabling it. The driver does so by
calling the set control handler on the auto BLC and BLC offset controls,
but this programs the hardware with the new value of those controls, not
the current value. Fix this by writing to the registers directly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Wed, 7 May 2014 15:34:34 +0000 (12:34 -0300)]
[media] mt9p031: Really disable Black Level Calibration in test pattern mode
The digital side of the Black Level Calibration (BLC) function must be
disabled when generating a test pattern to avoid artifacts in the image.
The driver disables BLC correctly at the hardware level, but the feature
gets reenabled by v4l2_ctrl_handler_setup() the next time the device is
powered on.
Fix this by marking the BLC controls as inactive when generating a test
pattern, and ignoring control set requests on inactive controls.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Archit Taneja [Thu, 13 Mar 2014 11:44:10 +0000 (08:44 -0300)]
[media] v4l: ti-vpe: Rename csc memory resource name
Rename the memory block resource "vpe_csc" to "csc" since it also exists within
the VIP IP block. This would make the name more generic, and both VPE and VIP DT
nodes in the future can use it.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Archit Taneja [Thu, 13 Mar 2014 11:44:09 +0000 (08:44 -0300)]
[media] v4l: ti-vpe: Add selection API in VPE driver
Add selection ioctl ops. For VPE, cropping makes sense only for the input to
VPE(or V4L2_BUF_TYPE_VIDEO_OUTPUT/MPLANE buffers) and composing makes sense
only for the output of VPE(or V4L2_BUF_TYPE_VIDEO_CAPTURE/MPLANE buffers).
For the CAPTURE type, V4L2_SEL_TGT_COMPOSE results in VPE writing the output
in a rectangle within the capture buffer. For the OUTPUT type, V4L2_SEL_TGT_CROP
results in selecting a rectangle region within the source buffer.
Setting the crop/compose rectangles should successfully result in
re-configuration of registers which are affected when either source or
destination dimensions change, set_srcdst_params() is called for this purpose.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Archit Taneja [Thu, 13 Mar 2014 11:44:08 +0000 (08:44 -0300)]
[media] v4l: ti-vpe: Fix some params in VPE data descriptors
Some parameters of the VPE descriptors were understood incorrectly. They are now
fixed. The fixes are explained as follows:
- When adding an inbound data descriptor to the VPDMA descriptor list, we intend
to use c_rect as the cropped region fetched by VPDMA. Therefore, c_rect->width
shouldn't be used to calculate the line stride, the original image width
should be used for that. We add a 'width' argument which gives the buffer
width in memory.
- frame_width and frame_height describe the complete width and height of the
client to which the channel is connected. If there are multiple channels
fetching data and providing to the same client, the above 2 arguments should
be the width and height of the region covered by all the channels. In the case
where there is only one channel providing pixel data to the client
(like in VPE), frame_width and frame_height should be the cropped width and
cropped height respectively. The calculation of these params is done in the
vpe driver now.
- start_h and start_v is also used in the case of multiple channels to describe
where each channel should start filling pixel data. We don't use this in VPE,
and pass 0s to the vpdma_add_in_dtd() helper.
- Some minor changes are made to the vpdma_add_out_dtd() helper. The c_rect
param is used for specifying the 'composition' target, and 'width' is added
to calculate the line stride.
Signed-off-by: Archit Taneja <archit@ti.com>
Acked-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Mauro Carvalho Chehab [Fri, 23 May 2014 17:29:44 +0000 (14:29 -0300)]
[media] em28xx: make em28xx_free_v4l2 static()
Changeset
95d2608b88 created this function, but declared it as
global, by mistake.
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Archit Taneja [Thu, 13 Mar 2014 11:44:06 +0000 (08:44 -0300)]
[media] v4l: ti-vpe: Allow DMABUF buffer type support
For OMAP and DRA7x, we generally allocate video and graphics buffers through
omapdrm since the corresponding omap-gem driver provides DMM-Tiler backed
contiguous buffers. omapdrm is a dma-buf exporter. These buffers are used by
other drivers in the video pipeline.
Add VB2_DMABUF flag to the io_modes of the vb2 output and capture queues. This
allows the driver to import dma shared buffers.
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Archit Taneja [Thu, 13 Mar 2014 11:44:04 +0000 (08:44 -0300)]
[media] v4l: ti-vpe: register video device only when firmware is loaded
vpe fops(vpe_open in particular) should be called only when VPDMA firmware
is loaded. File operations on the video device are possible the moment it is
registered.
Currently, we register the video device for VPE at driver probe, after calling
a vpdma helper to initialize VPDMA and load firmware. This function is
non-blocking(it calls request_firmware_nowait()), and doesn't ensure that the
firmware is actually loaded when it returns.
We remove the device registration from vpe probe, and move it to a callback
provided by the vpe driver to the vpdma library, through vpdma_create().
The ready field in vpdma_data is no longer needed since we always have firmware
loaded before the device is registered.
A minor problem with this approach is that if the video_register_device
fails(which doesn't really happen), the vpe platform device would be registered.
however, there won't be any v4l2 device corresponding to it.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Thu, 17 Apr 2014 09:44:31 +0000 (06:44 -0300)]
[media] saa7134: add saa7134_userptr module option to enable USERPTR
If the saa7134 module is loaded with the saa7134_userptr set to 1,
then USERPTR support is enabled. A check in buffer_prepare
verifies that the pointer is page-aligned.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Thu, 17 Apr 2014 10:30:53 +0000 (07:30 -0300)]
[media] saa7134: convert to vb2
Convert the saa7134 driver to vb2.
Note that while this uses the vb2-dma-sg version, the VB2_USERPTR mode is
disabled. The DMA hardware only supports DMAing full pages, and in the
USERPTR memory model the first and last scatter-gather buffer is almost
never a full page.
In practice this means that we can't use the VB2_USERPTR mode.
This has been tested with raw video, compressed video, VBI, radio, DVB and
video overlays.
Unfortunately, a vb2 conversion is one of those things you cannot split
up in smaller patches, it's all or nothing. This patch switches the whole
driver over to vb2, using the vb2 ioctl and fop helper functions.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Thu, 17 Apr 2014 09:06:06 +0000 (06:06 -0300)]
[media] saa7134: move saa7134_pgtable to saa7134_dmaqueue
All dmaqueue's use saa7134_pgtable, so move it into struct saa7134_dmaqueue.
The videobuf_queue priv_data field now points to the dmaqueue struct.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Tue, 13 May 2014 17:24:44 +0000 (14:24 -0300)]
[media] saa7134: rename vbi/cap to vbi_vbq/cap_vbq
Use consistent _vbq suffix for videobuf_queue fields.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Philipp Zabel [Fri, 9 May 2014 15:32:10 +0000 (12:32 -0300)]
[media] vb2: fix num_buffers calculation if req->count > VIDEO_MAX_FRAMES
num_buffers can't be bigger than VIDEO_MAX_FRAME. This is assured by:
num_buffers = min_t(unsigned int, req->count, VIDEO_MAX_FRAME);
However, this value is overriden by:
num_buffers = max_t(unsigned int, req->count, q->min_buffers_needed);
It should, instead, use the previously calculated value as an input
to max_t:
num_buffers = max_t(unsigned int, num_buffers, q->min_buffers_needed);
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Sun, 20 Apr 2014 23:55:41 +0000 (20:55 -0300)]
[media] v4l: vb2: Avoid double WARN_ON when stopping streaming
The __vb2_queue_cancel function marks the queue as not streaming and
then WARNs when buffers are still owned by the driver. It proceeds to
complete all active buffers by calling vb2_buffer_done with the new
buffer state set to VB2_BUF_STATE_ERROR in that case. This triggers
another WARN_ON due to as new state not being VB2_BUF_STATE_QUEUED while
the queue is not streaming.
Check buffer ownership and complete all active buffers before marking
the queue as not streaming to avoid the double WARN_on.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Mon, 24 Mar 2014 19:33:25 +0000 (16:33 -0300)]
[media] em28xx: move fields wq_trigger and streaming_started from struct em28xx to struct em28xx_audio
Both wq_trigger and stream_started are used only to control the em28xx
alsa streaming. They don't belong to em28xx common struct.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Mon, 24 Mar 2014 19:33:24 +0000 (16:33 -0300)]
[media] em28xx: remove field tuner_addr from struct em28xx
The tuner address is only used by the v4l submodule and at tuner setup and
can be obtained from the board data directly (if specified).
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Mon, 24 Mar 2014 19:33:23 +0000 (16:33 -0300)]
[media] em28xx: remove field tda9887_conf from struct em28xx
The tda9887 chipset is part of the analog tuner. Move it out of
em28xx-cards.
Also, it is used only one time by the v4l2 sub-module at tuner setup.
With that, we can get rid of an additional data inside the em28xx
common structure.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Mon, 24 Mar 2014 19:33:22 +0000 (16:33 -0300)]
[media] em28xx: move tuner frequency field from struct em28xx to struct v4l2
Move V4L2-specific frequency cache to struct em28xx_v4l2.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Sun, 11 May 2014 20:59:04 +0000 (17:59 -0300)]
[media] em28xx: move v4l2 user counting fields from struct em28xx to struct v4l2
Despite being at the common em28xx struct, those two fields are
actually taking into account only the usage inside em28xx v4l2
submodule. So, move them out of the common struct.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Mon, 24 Mar 2014 19:33:20 +0000 (16:33 -0300)]
[media] em28xx: move capture state tracking fields from struct em28xx to struct v4l2
Move some temporary capture tracking date to the em28xx_v4l2 struct,
as those info are used only by em28xx v4l2 submodule.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Mon, 24 Mar 2014 19:33:19 +0000 (16:33 -0300)]
[media] em28xx: move sensor parameter fields from struct em28xx to struct v4l2
Move camera sensor resolution and xtal out of em28xx common struct,
as thore are used only by the em28xx v4l2 submodule.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Mon, 24 Mar 2014 19:33:18 +0000 (16:33 -0300)]
[media] em28xx: move progressive/interlaced fields from struct em28xx to struct v4l2
The video progressive data fields belong to analog TV. Move them out
of the common em28xx struct.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Mon, 24 Mar 2014 19:33:17 +0000 (16:33 -0300)]
[media] em28xx: move struct em28xx_fmt *format from struct em28xx to struct v4l2
The analog format struct belongs to analog TV. Move it out of the
common em28xx struct.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Mon, 24 Mar 2014 19:33:16 +0000 (16:33 -0300)]
[media] em28xx: move TV norm from struct em28xx to struct v4l2
TV norm is specific to analog TV reception. move it out of the common
em28xx struct.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Mon, 24 Mar 2014 19:33:15 +0000 (16:33 -0300)]
[media] em28xx: move vinmode and vinctrl data from struct em28xx to struct v4l2
The video input mode and control data also belong only to the
analog side. move them to struct em28xx_v4l.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Mon, 24 Mar 2014 19:33:14 +0000 (16:33 -0300)]
[media] em28xx: move v4l2 frame resolutions and scale data from struct em28xx to struct v4l2
The em28xx scaler data are used only for analog video. Move them to
struct em28xx_v4l2.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Mon, 24 Mar 2014 19:33:13 +0000 (16:33 -0300)]
[media] em28xx: move videobuf2 related data from struct em28xx to struct v4l2
The video and VBI-specific VB2 queue and mutexes are used only by
the v4l2 sub-driver. Move them to the V4L2 struct, preventing
wasting memory if this sub-driver is not used.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Mon, 24 Mar 2014 19:33:12 +0000 (16:33 -0300)]
[media] em28xx: move video_device structs from struct em28xx to struct v4l2
There are 3 struct video_device at the em28xx common struct,
for video, VBI and radio. They all are used only by the V4L2 driver.
So, move them to the v4l2-specific struct.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Mon, 24 Mar 2014 19:33:11 +0000 (16:33 -0300)]
[media] em28xx: move struct v4l2_clk *clk from struct em28xx to struct v4l2
The current clock definition applies only to the V4L2 side of the
driver. Move its struct pointer to the v4l2_dev, where it belongs.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Mon, 24 Mar 2014 19:33:10 +0000 (16:33 -0300)]
[media] em28xx: move struct v4l2_ctrl_handler ctrl_handler from struct em28xx to struct v4l2
Controls are only applicable to V4L2 module. Move the corresponding
data structs to the proper place.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Mon, 24 Mar 2014 19:33:09 +0000 (16:33 -0300)]
[media] em28xx: start moving em28xx-v4l specific data to its own struct
That reduces a little bit the memory footprint when em28xx-video
is not loaded.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Mon, 24 Mar 2014 19:33:08 +0000 (16:33 -0300)]
[media] em28xx-video: simplify usage of the pointer to struct v4l2_ctrl_handler in em28xx_v4l2_init()
The local var hdl is already pointing to &dev->ctrl_handler.
Use it, instead of dereferencing it all the time.
Code cleanup. No functional changes.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Mon, 24 Mar 2014 19:33:07 +0000 (16:33 -0300)]
[media] em28xx: move sub-module data structs to a common place in the main struct
Just a cleanup. No functional changes.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Sun, 11 May 2014 20:29:07 +0000 (17:29 -0300)]
[media] em28xx: remove the i2c_set_adapdata() call in em28xx_i2c_register()
It is no longer needed since nobody is calling i2c_get_adapdata() anymore.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Mikhail Domrachev [Tue, 1 Apr 2014 12:28:17 +0000 (09:28 -0300)]
[media] saa7134: add vidioc_querystd
Signed-off-by: Mikhail Domrachev <mihail.domrychev@comexp.ru>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Fri, 9 May 2014 12:26:04 +0000 (09:26 -0300)]
[media] v4l2-ioctl: drop spurious newline in string
The message logged by v4l_print_cropcap should be a single line withouti
linebreaks, just like all the other v4l_print_<ioctl> functions.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Vitaly Osipov [Thu, 10 Apr 2014 09:02:38 +0000 (06:02 -0300)]
[media] staging: media: omap24xx: use pr_info() instead of KERN_INFO
tcm825x.c:
changed printk to pr_info
Signed-off-by: Vitaly Osipov <vitaly.osipov@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Vitaly Osipov [Thu, 10 Apr 2014 09:01:50 +0000 (06:01 -0300)]
[media] staging: media: omap24xx: fix up checkpatch error message
tcm825x.c:
fixing ERROR: Macros with complex values should be enclosed in parenthesis
Signed-off-by: Vitaly Osipov <vitaly.osipov@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Ma Haijun [Thu, 27 Mar 2014 11:07:06 +0000 (08:07 -0300)]
[media] videobuf-dma-contig: fix incorrect argument to vm_iomap_memory() call
The second argument should be physical address rather than virtual address.
Signed-off-by: Ma Haijun <mahaijuns@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Takashi Iwai [Mon, 5 May 2014 14:20:05 +0000 (11:20 -0300)]
[media] ivtv: Fix Oops when no firmware is loaded
When ivtv PCM device is accessed at the state where no firmware is
loaded, it oopses like:
BUG: unable to handle kernel NULL pointer dereference at
0000000000000050
IP: [<
ffffffffa049a881>] try_mailbox.isra.0+0x11/0x50 [ivtv]
Call Trace:
[<
ffffffffa049aa20>] ivtv_api_call+0x160/0x6b0 [ivtv]
[<
ffffffffa049af86>] ivtv_api+0x16/0x40 [ivtv]
[<
ffffffffa049b10c>] ivtv_vapi+0xac/0xc0 [ivtv]
[<
ffffffffa049d40d>] ivtv_start_v4l2_encode_stream+0x19d/0x630 [ivtv]
[<
ffffffffa0530653>] snd_ivtv_pcm_capture_open+0x173/0x1c0 [ivtv_alsa]
[<
ffffffffa04526f1>] snd_pcm_open_substream+0x51/0x100 [snd_pcm]
[<
ffffffffa0452853>] snd_pcm_open+0xb3/0x260 [snd_pcm]
[<
ffffffffa0452a37>] snd_pcm_capture_open+0x37/0x50 [snd_pcm]
[<
ffffffffa033f557>] snd_open+0xa7/0x1e0 [snd]
[<
ffffffff8118a628>] chrdev_open+0x88/0x1d0
[<
ffffffff811840be>] do_dentry_open+0x1de/0x270
[<
ffffffff81193a73>] do_last+0x1c3/0xec0
[<
ffffffff81194826>] path_openat+0xb6/0x670
[<
ffffffff81195b65>] do_filp_open+0x35/0x80
[<
ffffffff81185449>] do_sys_open+0x129/0x210
[<
ffffffff815b782d>] system_call_fastpath+0x1a/0x1f
This patch adds the check of firmware at PCM open callback like other
open callbacks of this driver.
Bugzilla: https://apibugzilla.novell.com/show_bug.cgi?id=875440
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Alexander Shiyan [Sat, 26 Apr 2014 09:14:46 +0000 (06:14 -0300)]
[media] media: coda: Use full device name for request_irq()
This will help to debug driver, allows us to see the full name of
the device through /proc/interrupts.
CPU0
...
69: 0 mxc-avic 53
10023000.coda
...
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Lad, Prabhakar [Mon, 14 Apr 2014 14:52:31 +0000 (11:52 -0300)]
[media] media: davinci: vpbe: release buffers in case start_streaming call back fails
this patch adds support to release the buffer by calling
vb2_buffer_done(), with state marked as VB2_BUF_STATE_QUEUED
if start_streaming() call back fails.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Daeseok Youn [Thu, 8 May 2014 22:57:18 +0000 (19:57 -0300)]
[media] s2255drv: fix memory leak s2255_probe()
smatch says:
drivers/media/usb/s2255/s2255drv.c:2246 s2255_probe() warn:
possible memory leak of 'dev'
Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Himangi Saraogi [Wed, 7 May 2014 04:44:18 +0000 (01:44 -0300)]
[media] timblogiw: Introduce the use of the managed version of kzalloc
This patch moves data allocated using kzalloc to managed data allocated
using devm_kzalloc and cleans now unnecessary kfrees in probe and remove
functions.The label err_register is removed as it is no longer required.
The following Coccinelle semantic patch was used for making the change:
@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
.probe = probefn,
.remove = removefn,
};
@prb@
identifier platform.probefn, pdev;
expression e, e1, e2;
@@
probefn(struct platform_device *pdev, ...) {
<+...
- e = kzalloc(e1, e2)
+ e = devm_kzalloc(&pdev->dev, e1, e2)
...
?-kfree(e);
...+>
}
@rem depends on prb@
identifier platform.removefn;
expression e;
@@
removefn(...) {
<...
- kfree(e);
...>
}
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Masanari Iida [Wed, 30 Apr 2014 15:57:50 +0000 (12:57 -0300)]
[media] media: parport: Fix format string mismatch in bw-qcam.c
Fix format string mismatch in bw-qcam.c
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Ricardo Ribalda [Fri, 25 Apr 2014 16:11:29 +0000 (13:11 -0300)]
[media] videobuf2-dma-sg: Fix NULL pointer dereference BUG
vb2_get_vma() copy the content of the vma to a new structure but set
some of its pointers to NULL.
One of this pointer is used by follow_pte() called by follow_pfn()
on io memory.
This can lead to a NULL pointer derreference.
The version of vma that has not been cleared must be used.
[ 406.143320] BUG: unable to handle kernel NULL pointer dereference at
0000000000000040
[ 406.143427] IP: [<
ffffffff8115204c>] follow_pfn+0x2c/0x70
[ 406.143491] PGD
6c3f0067 PUD
6c3ef067 PMD 0
[ 406.143546] Oops: 0000 [#1] SMP
[ 406.143587] Modules linked in: qtec_mem qt5023_video qtec_testgen qtec_xform videobuf2_core gpio_xilinx videobuf2_vmalloc videobuf2_dma_sg qtec_cmosis videobuf2_memops qtec_pcie qtec_white fglrx(PO) qt5023 spi_xilinx spi_bitbang
[ 406.143852] CPU: 0 PID: 299 Comm: tracker Tainted: P O 3.13.0-qtec-standard #10
[ 406.143927] Hardware name: QTechnology QT5022/QT5022, BIOS PM_2.1.0.309 X64 04/04/2013
[ 406.144000] task:
ffff880085c82d60 ti:
ffff880085abe000 task.ti:
ffff880085abe000
[ 406.144067] RIP: 0010:[<
ffffffff8115204c>] [<
ffffffff8115204c>] follow_pfn+0x2c/0x70
[ 406.144145] RSP: 0018:
ffff880085abf888 EFLAGS:
00010296
[ 406.144195] RAX:
0000000000000000 RBX:
ffff880085abf8e0 RCX:
ffff880085abf888
[ 406.144260] RDX:
ffff880085abf890 RSI:
00007fc52e173000 RDI:
ffff8800863cbe40
[ 406.144325] RBP:
ffff880085abf8a8 R08:
0000000000000018 R09:
ffff8800863cbf00
[ 406.144388] R10:
ffff880086703b80 R11:
00000000000001e0 R12:
0000000000018000
[ 406.144452] R13:
0000000000000000 R14:
ffffea0000000000 R15:
ffff88015922fea0
[ 406.144517] FS:
00007fc536e7c740(0000) GS:
ffff88015ec00000(0000) knlGS:
0000000000000000
[ 406.144591] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 406.144644] CR2:
0000000000000040 CR3:
0000000066c9d000 CR4:
00000000000007f0
[ 406.144708] Stack:
[ 406.144731]
0000000000018000 00007fc52e18b000 0000000000000000 00007fc52e173000
[ 406.144813]
ffff880085abf918 ffffffffa083b2fd ffff880085ab1ba8 0000000000000000
[ 406.144894]
0000000000000000 0000000100000000 ffff880085abf928 ffff880159a20800
[ 406.144976] Call Trace:
[ 406.145011] [<
ffffffffa083b2fd>] vb2_dma_sg_get_userptr+0x14d/0x310 [videobuf2_dma_sg]
[ 406.145089] [<
ffffffffa08507df>] __qbuf_userptr+0xbf/0x3e0 [videobuf2_core]
[ 406.147229] [<
ffffffffa0041454>] ? mc_heap_lock_memory+0x1f4/0x490 [fglrx]
[ 406.149234] [<
ffffffff813428f3>] ? cpumask_next_and+0x23/0x50
[ 406.151223] [<
ffffffff810b2e38>] ? enqueue_task_fair+0x658/0xde0
[ 406.153199] [<
ffffffff81061888>] ? native_smp_send_reschedule+0x48/0x60
[ 406.155184] [<
ffffffff815836b9>] ? get_ctrl+0xa9/0xd0
[ 406.157161] [<
ffffffff8116f4e4>] ? __kmalloc+0x1a4/0x1b0
[ 406.159135] [<
ffffffffa0850b9c>] ? __vb2_queue_alloc+0x9c/0x4a0 [videobuf2_core]
[ 406.161130] [<
ffffffffa0852d08>] __buf_prepare+0x1a8/0x210 [videobuf2_core]
[ 406.163171] [<
ffffffffa0854c57>] __vb2_qbuf+0x27/0xcc [videobuf2_core]
[ 406.165229] [<
ffffffffa0851dfd>] vb2_queue_or_prepare_buf+0x1ed/0x270 [videobuf2_core]
[ 406.167325] [<
ffffffffa0854c30>] ? vb2_ioctl_querybuf+0x30/0x30 [videobuf2_core]
[ 406.169419] [<
ffffffffa0851e9c>] vb2_qbuf+0x1c/0x20 [videobuf2_core]
[ 406.171508] [<
ffffffffa0851ef8>] vb2_ioctl_qbuf+0x58/0x70 [videobuf2_core]
[ 406.173604] [<
ffffffff8157d3a8>] v4l_qbuf+0x48/0x60
[ 406.175681] [<
ffffffff8157b29c>] __video_do_ioctl+0x2bc/0x340
[ 406.177779] [<
ffffffff8116f43c>] ? __kmalloc+0xfc/0x1b0
[ 406.179883] [<
ffffffff8157cd0e>] ? video_usercopy+0x7e/0x470
[ 406.181961] [<
ffffffff8157ce81>] video_usercopy+0x1f1/0x470
[ 406.184021] [<
ffffffff8157afe0>] ? v4l_printk_ioctl+0xb0/0xb0
[ 406.186085] [<
ffffffff810ae1ed>] ? account_system_time+0x8d/0x190
[ 406.188149] [<
ffffffff8157d115>] video_ioctl2+0x15/0x20
[ 406.190216] [<
ffffffff815781b3>] v4l2_ioctl+0x123/0x160
[ 406.192251] [<
ffffffff810ce415>] ? rcu_eqs_enter+0x65/0xa0
[ 406.194256] [<
ffffffff81186b28>] do_vfs_ioctl+0x88/0x560
[ 406.196258] [<
ffffffff810ae145>] ? account_user_time+0x95/0xb0
[ 406.198262] [<
ffffffff810ae6a4>] ? vtime_account_user+0x44/0x70
[ 406.200215] [<
ffffffff81187091>] SyS_ioctl+0x91/0xb0
[ 406.202107] [<
ffffffff817be109>] tracesys+0xd0/0xd5
[ 406.203946] Code: 66 66 66 90 48 f7 47 50 00 44 00 00 b8 ea ff ff ff 74 52 55 48 89 e5 53 48 89 d3 48 8d 4d e0 48 8d 55 e8 48 83 ec 18 48 8b 47 40 <48> 8b 78 40 e8 8b fe ff ff 85 c0 75 27 48 8b 55 e8 48 b9 00 f0
[ 406.208011] RIP [<
ffffffff8115204c>] follow_pfn+0x2c/0x70
[ 406.209908] RSP <
ffff880085abf888>
[ 406.211760] CR2:
0000000000000040
[ 406.213676] ---[ end trace
996d9f64e6739a04 ]---
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Hans Verkuil [Wed, 23 Apr 2014 14:32:11 +0000 (11:32 -0300)]
[media] v4l2-pci-skeleton: fix typo
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Pali Rohár [Tue, 22 Apr 2014 15:02:39 +0000 (12:02 -0300)]
[media] radio-bcm2048: fix wrong overflow check
This patch fixes an off by one check in bcm2048_set_region().
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Kirill Tkhai [Thu, 17 Apr 2014 20:47:04 +0000 (17:47 -0300)]
[media] s2255: Do not free fw_data until timer handler has actually stopped using it
Function del_timer() does not guarantee that timer was really deleted.
If the timer handler is beeing executed at the moment, the function
does nothing. So, we have a race between del_timer() and kfree(), and
it's possible to use already freed memory in the handler.
Signed-off-by: Kirill Tkhai <tkhai@yandex.ru>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Jinqiang Zeng [Sat, 19 Apr 2014 03:09:47 +0000 (00:09 -0300)]
[media] fix the code style errors in sn9c102
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Dan Carpenter [Fri, 28 Mar 2014 08:26:03 +0000 (05:26 -0300)]
[media] av7110: fix confusing indenting
The else statement here is not aligned with the correct if statement.
I think the code works as intended and it's just the indenting which is
wrong. Also kernel style says we should use curly braces here so I have
added those.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Bartlomiej Zolnierkiewicz [Tue, 18 Mar 2014 10:41:42 +0000 (07:41 -0300)]
[media] v4l: ti-vpe: fix devm_ioremap_resource() return value checking
devm_ioremap_resource() returns a pointer to the remapped memory or
an ERR_PTR() encoded error code on failure. Fix the checks inside
csc_create() and sc_create() accordingly.
Cc: Archit Taneja <archit@ti.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Tested-by: Archit Taneja<archit@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Sat, 22 Mar 2014 13:01:03 +0000 (10:01 -0300)]
[media] em28xx: move norm_maxw() and norm_maxh() from em28xx.h to em28xx-video.c
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Mon, 24 Mar 2014 19:28:36 +0000 (16:28 -0300)]
[media] em28xx: remove function em28xx_compression_disable() and its call
em28xx_compression_disable() is a single line function which is called only one
time and this call also isn't needed.
Register 0x26 is always configured as part of the scaler configuration, which
in turn is always done when the resolution changes. And the initial resolution
setting is applied at first device open.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Sat, 22 Mar 2014 13:01:01 +0000 (10:01 -0300)]
[media] em28xx: remove some unused fields from struct em28xx
Just driver cleanup. No functional changes.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Frank Schaefer [Sat, 22 Mar 2014 13:00:59 +0000 (10:00 -0300)]
[media] em28xx: fix indenting in em28xx_usb_probe()
No functional changes.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Mon, 21 Apr 2014 13:44:55 +0000 (10:44 -0300)]
[media] omap4iss: Relax usleep ranges
Allow the system to merge CPU wakeups by specifying different minimum
and maximum usleep values.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Fri, 28 Mar 2014 18:27:32 +0000 (15:27 -0300)]
[media] omap4iss: Use a common macro for all sleep-based poll loops
Instead of implementing usleep_range-based poll loops manually (and
slightly differently), create a generic iss_poll_wait_timeout() macro
and use it through the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Fri, 28 Mar 2014 17:39:54 +0000 (14:39 -0300)]
[media] omap4iss: Add missing white space
The error was reported by checkpatch.pl. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Laurent Pinchart [Fri, 28 Mar 2014 17:38:17 +0000 (14:38 -0300)]
[media] omap4iss: Don't check for DEBUG when printing IRQ debugging messages
Now that the VIDEO_OMAP4_DEBUG Kconfig option has been removed in favour
of dynamic printk, the DEBUG macro isn't defined anymore. Don't check
for it to guard IRQ debugging messages compilation, as they're already
guarded by the ISS_ISR_DEBUG macro.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Paul Bolle [Sun, 9 Feb 2014 15:09:37 +0000 (12:09 -0300)]
[media] omap4iss: Remove VIDEO_OMAP4_DEBUG Kconfig option
The option was supposed to control the definition of the DEBUG macro in
the Makefile but has been left unused by mistake. Given that debugging
should be enabled using dynamic printk, remote the Kconfig option.
[Reworked the commit message]
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Sakari Ailus [Sun, 4 May 2014 00:31:57 +0000 (21:31 -0300)]
[media] smiapp: Return correct return value in smiapp_registered()
Prepare for supporting systems using the Device tree. Should the resources
not be available at the time of driver probe(), the EPROBE_DEFER error code
must be also returned from its probe function.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Sakari Ailus [Sun, 4 May 2014 00:31:56 +0000 (21:31 -0300)]
[media] smiapp: Check for GPIO validity using gpio_is_valid()
Do not use our special value, SMIAPP_NO_XSHUTDOWN.
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Sakari Ailus [Sun, 4 May 2014 00:31:55 +0000 (21:31 -0300)]
[media] smiapp: Use better regulator name for the Device tree
Rename "VANA" regulator as "vana".
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Sakari Ailus [Tue, 15 Apr 2014 18:22:11 +0000 (15:22 -0300)]
[media] smiapp: Scaling goodness is signed
The "best" value was unsigned however, leading to signed-to-unsigned
comparison and wrong results. Possibly only on a newer GCC. Fix this by
making the best value signed as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Sakari Ailus [Tue, 15 Apr 2014 17:59:42 +0000 (14:59 -0300)]
[media] smiapp: Call limits quirk immediately after retrieving the limits
Some of the limits are used before the limits quirk is called. Move the call
immediately after obtaining the limits.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Sakari Ailus [Tue, 15 Apr 2014 17:06:50 +0000 (14:06 -0300)]
[media] smiapp: Print the index of the format descriptor
This makes constructing quirks easier.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Olivier Langlois [Fri, 28 Mar 2014 05:42:38 +0000 (02:42 -0300)]
[media] uvcvideo: Fix clock param realtime setting
timestamps in v4l2 buffers returned to userspace are updated in
uvc_video_clock_update() which uses timestamps fetched from
uvc_video_clock_decode() by calling unconditionally ktime_get_ts().
Hence setting the module clock param to realtime has no effect before
this patch.
This has been tested with ffmpeg:
ffmpeg -y -f v4l2 -input_format yuyv422 -video_size 640x480 -framerate 30 -i /dev/video0 \
-f alsa -acodec pcm_s16le -ar 16000 -ac 1 -i default \
-c:v libx264 -preset ultrafast \
-c:a libfdk_aac \
out.mkv
and inspecting the v4l2 input starting timestamp.
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Olivier Langlois <olivier@trillion01.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Anton Leontiev [Tue, 25 Mar 2014 04:40:57 +0000 (01:40 -0300)]
[media] uvcvideo: Fix marking buffer erroneous in case of FID toggling
Set error bit for incomplete buffers when end of buffer is detected by
FID toggling (for example when last transaction with EOF is lost).
This prevents passing incomplete buffers to the userspace.
Signed-off-by: Anton Leontiev <bunder@t-25.ru>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Mauro Carvalho Chehab [Thu, 22 May 2014 02:03:15 +0000 (23:03 -0300)]
Merge tag 'v3.15-rc6' into patchwork
Linux 3.15-rc6
* tag 'v3.15-rc6': (1314 commits)
Linux 3.15-rc6
Btrfs: send, fix incorrect ref access when using extrefs
Btrfs: fix EIO on reading file after ioctl clone works on it
scripts/checksyscalls.sh: Make renameat optional
asm-generic: Add renameat2 syscall
ia64: add renameat2 syscall
parisc: add renameat2 syscall
m68k: add renameat2 syscall
sysfs: make sure read buffer is zeroed
ahci: imx: PLL clock needs 100us to settle down
PCI: Wrong register used to check pending traffic
target: fix memory leak on XCOPY
random: fix BUG_ON caused by accounting simplification
clk: tegra: Fix wrong value written to PLLE_AUX
staging: rtl8723au: Do not reset wdev->iftype in netdev_close()
ACPI / video: Revert native brightness quirk for ThinkPad T530
staging: rtl8723au: Use correct pipe type for USB interrupts
crush: decode and initialize chooseleaf_vary_r
libceph: fix corruption when using page_count 0 page in rbd
arm64: fix pud_huge() for 2-level pagetables
...
Linus Torvalds [Wed, 21 May 2014 21:42:02 +0000 (06:42 +0900)]
Linux 3.15-rc6
Linus Torvalds [Wed, 21 May 2014 20:55:12 +0000 (05:55 +0900)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
Pull two powerpc fixes from Ben Herrenschmidt:
"Here are a couple of fixes for 3.15. One from Anton fixes a nasty
regression I introduced when trying to fix a loss of irq_work whose
consequences is that we can completely lose timer interrupts on a
CPU... not pretty.
The other one is a change to our PCIe reset hook to use a firmware
call instead of direct config space accesses to trigger a fundamental
reset on the root port. This is necessary so that the FW gets a
chance to disable the link down error monitoring, which would
otherwise trip and cause subsequent fatal EEH error"
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: irq work racing with timer interrupt can result in timer interrupt hang
powerpc/powernv: Reset root port in firmware
Linus Torvalds [Wed, 21 May 2014 20:40:13 +0000 (05:40 +0900)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs
Pull two btrfs fixes from Chris Mason:
"This has two fixes that we've been testing for 3.16, but since both
are safe and fix real bugs, it makes sense to send for 3.15 instead"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: send, fix incorrect ref access when using extrefs
Btrfs: fix EIO on reading file after ioctl clone works on it
Linus Torvalds [Wed, 21 May 2014 20:38:51 +0000 (05:38 +0900)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client
Pull two ceph fixes from Sage Weil:
"The first patch fixes a problem when we have a page count of 0 for
sendpage which is triggered by zfs. The second fixes a bug in CRUSH
that was resolved in the userland code a while back but fell through
the cracks on the kernel side"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
crush: decode and initialize chooseleaf_vary_r
libceph: fix corruption when using page_count 0 page in rbd
Linus Torvalds [Wed, 21 May 2014 20:36:07 +0000 (05:36 +0900)]
Merge tag 'xfs-for-linus-3.15-rc6' of git://oss.sgi.com/xfs/xfs
Pull xfs fixes from Dave Chinner:
"Code inspection of the XFS error number sign translations found a
bunch of issues, including returning incorrectly signed errors for
some data integrity operations.
These leak to userspace and result in applications not getting the
errors correctly reported. Hence they need fixing sooner rather than
later.
A couple of the bugs are in data integrity operations, a couple more
are in the new COLLAPSE_RANGE code. One of these came in through a
recent ext4 merge and so I had to update the base tree to 3.15-rc5
before fixing the issues"
* tag 'xfs-for-linus-3.15-rc6' of git://oss.sgi.com/xfs/xfs:
xfs: list_lru_init returns a negative error
xfs: negate xfs_icsb_init_counters error value
xfs: negate mount workqueue init error value
xfs: fix wrong err sign on xfs_set_acl()
xfs: fix wrong errno from xfs_initxattrs
xfs: correct error sign on COLLAPSE_RANGE errors
xfs: xfs_commit_metadata returns wrong errno
xfs: fix incorrect error sign in xfs_file_aio_read
xfs: xfs_dir_fsync() returns positive errno
Linus Torvalds [Wed, 21 May 2014 20:34:57 +0000 (05:34 +0900)]
Merge branch 'renameat2' of git://git./linux/kernel/git/mszeredi/vfs
Pull renameat2 arch support from Miklos Szeredi:
"I've collected architecture patches for the renameat2 syscall that
maintainers acked and/or asked me to queue.
This adds architecture support for the renameat2 syscall to m68k,
parisc, ia64 and through asm-generic to arc, arm64, c6x, hexagon,
metag, openrisc, score, tile, unicore32"
* 'renameat2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
scripts/checksyscalls.sh: Make renameat optional
asm-generic: Add renameat2 syscall
ia64: add renameat2 syscall
parisc: add renameat2 syscall
m68k: add renameat2 syscall
Linus Torvalds [Wed, 21 May 2014 19:29:39 +0000 (04:29 +0900)]
Merge tag 'iommu-fixes-v3.15-rc5' of git://git./linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
"Three fixes for the AMD IOMMU driver:
- fix a locking issue around get_user_pages()
- fix two issues with device aliasing and exclusion range handling"
* tag 'iommu-fixes-v3.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: fix enabling exclusion range for an exact device
iommu/amd: Take mmap_sem when calling get_user_pages
iommu/amd: Fix interrupt remapping for aliased devices
Linus Torvalds [Wed, 21 May 2014 19:28:21 +0000 (04:28 +0900)]
Merge tag 'stable/for-linus-3.15-rc5-tag' of git://git./linux/kernel/git/konrad/ibft
Pull iscsi_ibft fix from Konrad Rzeszutek Wilk:
"Fix iBFT regression on Broadcom NICs introduced in 3.2"
* tag 'stable/for-linus-3.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
iscsi_ibft: Fix finding Broadcom specific ibft sign
Linus Torvalds [Wed, 21 May 2014 19:26:23 +0000 (04:26 +0900)]
Merge tag 'renesas-sh-drivers-for-v3.15' of git://git./linux/kernel/git/horms/renesas
Pull SH driver fix from Simon Horman:
"Compile drivers/sh/pm_runtime.c if ARCH_SHMOBILE_MULTI
This resolves a regression introduced in v3.14 by commit
bf98c1eac1d4
("ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY")"
* tag 'renesas-sh-drivers-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
drivers: sh: compile drivers/sh/pm_runtime.c if ARCH_SHMOBILE_MULTI
Linus Torvalds [Wed, 21 May 2014 10:01:08 +0000 (19:01 +0900)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Most of the changes are drivers fixes (rtl28xuu, fc2580, ov7670,
davinci, gspca, s5p-fimc and s5c73m3).
There is also a compat32 fix and one infoleak fixup at the media
controller"
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] V4L2: fix VIDIOC_CREATE_BUFS in 64- / 32-bit compatibility mode
[media] V4L2: ov7670: fix a wrong index, potentially Oopsing the kernel from user-space
[media] media-device: fix infoleak in ioctl media_enum_entities()
[media] fc2580: fix tuning failure on 32-bit arch
[media] Prefer gspca_sonixb over sn9c102 for all devices
[media] media: davinci: vpfe: make sure all the buffers unmapped and released
[media] staging: media: davinci: vpfe: make sure all the buffers are released
[media] media: davinci: vpbe_display: fix releasing of active buffers
[media] media: davinci: vpif_display: fix releasing of active buffers
[media] media: davinci: vpif_capture: fix releasing of active buffers
[media] s5p-fimc: Fix YUV422P depth
[media] s5c73m3: Add missing rename of v4l2_of_get_next_endpoint() function
[media] rtl28xxu: silence error log about disabled rtl2832_sdr module
[media] rtl28xxu: do not hard depend on staging SDR module
Linus Torvalds [Wed, 21 May 2014 10:00:09 +0000 (19:00 +0900)]
Merge tag 'staging-3.15-rc6' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are five staging driver fixes for 3.15-rc6 that resolve some
reported issues. They are for the imx and rtl8723au drivers"
* tag 'staging-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723au: Do not reset wdev->iftype in netdev_close()
staging: rtl8723au: Use correct pipe type for USB interrupts
imx-drm: imx-tve: correct DDC property name to 'ddc-i2c-bus'
imx-drm: imx-drm-core: skip components whose parent device is disabled
imx-drm: imx-drm-core: fix imx_drm_encoder_get_mux_id
Linus Torvalds [Wed, 21 May 2014 09:59:25 +0000 (18:59 +0900)]
Merge tag 'driver-core-3.15-rc6' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver core (well, sysfs) fixes for 3.15-rc6 that resolve
some reported issues and a regression from 3.13"
* tag 'driver-core-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: make sure read buffer is zeroed
kernfs, sysfs, cgroup: restrict extra perm check on open to sysfs
Linus Torvalds [Wed, 21 May 2014 09:57:25 +0000 (18:57 +0900)]
Merge tag 'pci-v3.15-fixes-2' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"These are fixes for an SHPCHP hotplug regression, a "wait for pending
transaction" problem (used in device reset paths), and an email
address update.
PCI device hotplug:
- Fix SHPCHP bus speed mismatch issue (Marcel Apfelbaum)
Miscellaneous:
- Fix pci_wait_for_pending_transaction() (Gavin Shan)
- Update email address (Ben Hutchings)"
* tag 'pci-v3.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Wrong register used to check pending traffic
PCI: shpchp: Check bridge's secondary (not primary) bus speed
PCI: Update my email address
Linus Torvalds [Wed, 21 May 2014 09:56:35 +0000 (18:56 +0900)]
Merge tag 'random_for_linus' of git://git./linux/kernel/git/tytso/random
Pull /dev/random fix from Ted Ts'o:
"This fixes a BUG_ON-causing regression that was introduced during the
last merge window"
* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: fix BUG_ON caused by accounting simplification
Linus Torvalds [Wed, 21 May 2014 09:55:17 +0000 (18:55 +0900)]
Merge tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux
Pull clock framework fixes from Mike Turquette:
"Clock framework and driver fixes, all of which fix user-visible
regressions.
As usual most fixes are for platform-specific clock drivers, but there
are also two fixes to the clk core after recent changes to the way
that clock unregistration is handled"
* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux:
clk: tegra: Fix wrong value written to PLLE_AUX
clk: shmobile: clk-mstp: change to using clock-indices
clk: Fix slab corruption in clk_unregister()
clk: Fix double free due to devm_clk_register()
clk: socfpga: fix clock driver for 3.15
clk: divider: Fix best div calculation for power-of-two and table dividers
clk: bcm281xx: don't use unnamed structs or unions
Linus Torvalds [Wed, 21 May 2014 09:53:55 +0000 (18:53 +0900)]
Merge tag 'spi-v3.15-rc5' of git://git./linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few core fixes around outlying cases here, nothing that should
affect most users but useful fixes. The diffstat is rather larger
than one might hope due some simple code motion in the fix for
!CONFIG_DMA, the actual meaningful change is much smaller.
- Fix handling of unsupported dual and quad mode support on slave
registration so that drivers that can degrade gracefully do so,
preventing regressions for drivers this is added.
- Fix build in !CONFIG_DMA cases following addition of generic DMA
mapping support.
- Fix error handling for queue creation which due to wider kernel
changes can be triggered more easily.
- A couple of driver specific fixes"
* tag 'spi-v3.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi/pxa2xx: Prevent DMA from transferring too many bytes
spi: core: Don't destroy master queue if we fail to create it
spi: qup: Fix return value checking for pm_runtime_get_sync()
spi: core: Protect DMA code by #ifdef CONFIG_HAS_DMA
spi: core: Ignore unsupported Dual/Quad Transfer Mode bits
Linus Torvalds [Wed, 21 May 2014 09:53:13 +0000 (18:53 +0900)]
Merge tag 'gpio-v3.15-3' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
- fix a null pointer bug in the ICH6 chipset driver
- fix device tree registration for the mcp23s08 driver
* tag 'gpio-v3.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mcp23s08: Bug fix of SPI device tree registration.
gpio: ich: set regs and reglen for i3100 and ich6 chipset
Linus Torvalds [Wed, 21 May 2014 09:36:40 +0000 (18:36 +0900)]
Merge branch 'for-3.15-fixes' of git://git./linux/kernel/git/tj/cgroup
Pull more cgroup fixes from Tejun Heo:
"Three more patches to fix cgroup_freezer breakage due to the recent
cgroup internal locking changes - an operation cgroup_freezer was
using now requires sleepable context and cgroup_freezer was invoking
that while holding a spin lock. cgroup_freezer was using an overly
elaborate hierarchical locking scheme.
While it's possible to convert the hierarchical spinlocks directly to
mutexes, this patch simplifies the overall locking so that it uses a
global mutex. This has the added benefit of avoiding iterating
potentially huge number of tasks under a spinlock. While the patch is
on the larger side in the devel cycle, the changes made are mostly
straight-forward and the locking logic is a lot simpler afterwards"
* 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix rcu_read_lock() leak in update_if_frozen()
cgroup_freezer: replace freezer->lock with freezer_mutex
cgroup: introduce task_css_is_root()
Linus Torvalds [Wed, 21 May 2014 09:35:42 +0000 (18:35 +0900)]
Merge branch 'for-3.15-fixes' of git://git./linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"Mostly device-specific fixes. The only thing which isn't is the fix
for zpodd oops-on-detach bug"
* 'for-3.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci: imx: PLL clock needs 100us to settle down
ata: pata_at91 only works on sam9
libata: clean up ZPODD when a port is detached
ahci: imx: software workaround for phy reset issue in resume
ahci: imx: add namespace for register enums
ahci: disable DEVSLP for Intel Valleyview
Linus Torvalds [Wed, 21 May 2014 09:34:35 +0000 (18:34 +0900)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a NULL pointer dereference on allocation failure in caam,
as well as a regression in the ctr mode on s390 that was added with
the recent concurrency fixes"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: s390 - fix aes,des ctr mode concurrency finding.
crypto: caam - add allocation failure handling in SPRINTFCAT macro