GitHub/mt8127/android_kernel_alcatel_ttab.git
18 years ago[ARM] 3378/1: ixp2000: fix gpio interrupt handling
Lennert Buytenhek [Wed, 22 Mar 2006 20:14:09 +0000 (20:14 +0000)]
[ARM] 3378/1: ixp2000: fix gpio interrupt handling

Patch from Lennert Buytenhek

ixp2000 used to initially mark GPIO interrupts as invalid, and not
mark them valid until set_irq_type() was called, but this doesn't
work if you want to use request_irq() with the SA_TRIGGER_* flags.

So, just mark the GPIO interrupts valid from the beginning.  We
configure GPIOs as inputs when set_irq_type() is called anyway, so
this shouldn't be a problem.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] Quieten spurious IRQ detection
Russell King [Wed, 22 Mar 2006 10:22:58 +0000 (10:22 +0000)]
[ARM] Quieten spurious IRQ detection

Only issue a "nobody cared" warning after 99900 spurious interrupts.
This avoids the occasional spurious interrupt causing warnings, as
per x86.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] Use kcalloc to allocate counter_config array rather than kmalloc
Russell King [Mon, 20 Mar 2006 16:52:32 +0000 (16:52 +0000)]
[ARM] Use kcalloc to allocate counter_config array rather than kmalloc

We need this to be zero initialised.  Since this is an array, use kcalloc
rather than kzalloc or kmalloc.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] Oprofile: dynamically allocate counter_config
Russell King [Thu, 16 Mar 2006 11:32:51 +0000 (11:32 +0000)]
[ARM] Oprofile: dynamically allocate counter_config

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] Oprofile: Convert semaphore to mutex
Russell King [Thu, 16 Mar 2006 11:38:16 +0000 (11:38 +0000)]
[ARM] Oprofile: Convert semaphore to mutex

op_arm_sem is being used as a mutex, so convert it to use
real mutexes.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3376/2: S3C2410 - update defconfig
Ben Dooks [Mon, 20 Mar 2006 21:28:04 +0000 (21:28 +0000)]
[ARM] 3376/2: S3C2410 - update defconfig

Patch from Ben Dooks

Add Simtec Osiris to the default build, and enable the
USB-OHCI section by default.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3375/1: S3C2440 - fix osiris machine build
Ben Dooks [Mon, 20 Mar 2006 21:02:39 +0000 (21:02 +0000)]
[ARM] 3375/1: S3C2440 - fix osiris machine build

Patch from Ben Dooks

Fix the build of arch/arm/mach-s3c2410/mach-osiris.c
and fix the warnings from sparse.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3374/1: ep93xx: gpio interrupt support
Lennert Buytenhek [Mon, 20 Mar 2006 21:02:37 +0000 (21:02 +0000)]
[ARM] 3374/1: ep93xx: gpio interrupt support

Patch from Lennert Buytenhek

Add GPIO interrupt support for the first 16 GPIO lines (port A
and B.)

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3361/1: S3C24XX - add USB bus clock source
Ben Dooks [Mon, 20 Mar 2006 21:00:48 +0000 (21:00 +0000)]
[ARM] 3361/1: S3C24XX - add USB bus clock source

Patch from Ben Dooks

Add USB bus clock definition for 48MHz fed to OHCI and gadget cores

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3360/1: S3C2440 - add set rate methods and camera clock
Ben Dooks [Mon, 20 Mar 2006 21:00:12 +0000 (21:00 +0000)]
[ARM] 3360/1: S3C2440 - add set rate methods and camera clock

Patch from Ben Dooks

Add set_rate methods for the extra clocks on the S3C2440
and add the camera UPLL clock source

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3359/1: S3C24XX - add support for clk_set_rate
Ben Dooks [Mon, 20 Mar 2006 21:00:08 +0000 (21:00 +0000)]
[ARM] 3359/1: S3C24XX - add support for clk_set_rate

Patch from Ben Dooks

Add support for clk_set_rate and clk_round_rate to the
s3c2410 clock implementation

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] Convert kmalloc+memset to kzalloc
Russell King [Mon, 20 Mar 2006 19:46:41 +0000 (19:46 +0000)]
[ARM] Convert kmalloc+memset to kzalloc

Convert all uses of kmalloc followed by memset to use kzalloc instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3373/1: move uengine loader to arch/arm/common
Lennert Buytenhek [Mon, 20 Mar 2006 17:10:17 +0000 (17:10 +0000)]
[ARM] 3373/1: move uengine loader to arch/arm/common

Patch from Lennert Buytenhek

Move the uengine loader from arch/arm/mach-ixp2000 to arch/arm/common
so that ixp23xx can use it too.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3372/1: ep93xx: add defconfig
Lennert Buytenhek [Mon, 20 Mar 2006 17:10:15 +0000 (17:10 +0000)]
[ARM] 3372/1: ep93xx: add defconfig

Patch from Lennert Buytenhek

Add ep93xx defconfig.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3371/1: ep93xx: gpio support
Lennert Buytenhek [Mon, 20 Mar 2006 17:10:14 +0000 (17:10 +0000)]
[ARM] 3371/1: ep93xx: gpio support

Patch from Lennert Buytenhek

Add support for setting the direction of and getting/setting the
value of the 64 GPIO lines.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3369/1: ep93xx: add core cirrus ep93xx support
Lennert Buytenhek [Mon, 20 Mar 2006 17:10:13 +0000 (17:10 +0000)]
[ARM] 3369/1: ep93xx: add core cirrus ep93xx support

Patch from Lennert Buytenhek

This patch adds support for the Cirrus ep93xx series of CPUs.  The
ep93xx is an ARM920T based CPU with two VICs, PL010 based UARTs,
IrDA, MaverickCrunch floating point coprocessor, between 24 and 64
GPIOs, ethernet, OHCI USB and, depending on the model, pcmcia, raster
engine, graphics accelerator, IDE controller and a bunch of other
stuff.

This patch adds the core ep93xx support code, and support for the
Glomation GESBC-9312-sx and the Technologic Systems TS-72xx SBCs.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3368/1: ixp4xx: set gpio direction in ixp4xx_config_irq
Alessandro Zummo [Mon, 20 Mar 2006 17:10:12 +0000 (17:10 +0000)]
[ARM] 3368/1: ixp4xx: set gpio direction in ixp4xx_config_irq

Patch from Alessandro Zummo

ixp4xx_config_irq did not configure the gpio line
as an input.

As an added bonus, the irq2gpio array has been converted
from int to char.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3349/1: ixp4xx exp bus defines
Alessandro Zummo [Mon, 20 Mar 2006 17:10:10 +0000 (17:10 +0000)]
[ARM] 3349/1: ixp4xx exp bus defines

Patch from Alessandro Zummo

This patch adds a few defines that are useful
to configure the CS regions on ixp4xx.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: OEyvind Repvik <oyvind@repvik.org>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3346/1: Fix udelay() for HZ values different from 100
Peter Teichmann [Mon, 20 Mar 2006 17:10:09 +0000 (17:10 +0000)]
[ARM] 3346/1: Fix udelay() for HZ values different from 100

Patch from Peter Teichmann

Currently, if the kernels HZ value is greater than 100, delays with the udelay function are too short. This can cause trouble for instance with the zd1201 usb wlan driver.

This patch suggests a solution that keeps the overhead small and maintains (hopefully) sufficient resolution.

Signed-off-by: Peter Teichmann
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3334/1: Add support for IXDP28x5 platforms
Deepak Saxena [Mon, 20 Mar 2006 17:10:08 +0000 (17:10 +0000)]
[ARM] 3334/1: Add support for IXDP28x5 platforms

Patch from Deepak Saxena

This patch adds support for Intel's IXDP28x5 platform. This
is just and IXDP2801 with a new CPU rev but the bootloader
has been updated to reflect a new machine ID so we just build
support for it by default when we build IXDP2801.

Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3333/1: S3C2XX - add dclk and clkout clock support
Ben Dooks [Mon, 20 Mar 2006 17:10:07 +0000 (17:10 +0000)]
[ARM] 3333/1: S3C2XX - add dclk and clkout clock support

Patch from Ben Dooks

Add enable and set_parent calls for the dclk
and clkout clocks.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3332/1: S3C24XX - documentation update
Ben Dooks [Mon, 20 Mar 2006 17:10:07 +0000 (17:10 +0000)]
[ARM] 3332/1: S3C24XX - documentation update

Patch from Ben Dooks

Add devices that we have drivers for, and
update list of machines that are supported

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3331/1: S3C24XX - add clk_set_parent() to clock code
Ben Dooks [Mon, 20 Mar 2006 17:10:04 +0000 (17:10 +0000)]
[ARM] 3331/1: S3C24XX - add clk_set_parent() to clock code

Patch from Ben Dooks

Add clk_set_parent() call to clock code

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3330/1: S3C24XX - move UPLL to main clock
Ben Dooks [Mon, 20 Mar 2006 17:10:04 +0000 (17:10 +0000)]
[ARM] 3330/1: S3C24XX - move UPLL to main clock

Patch from Ben Dooks

Move the UPLL clock registration to the central
clock file, and add an enable method

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3329/1: S3C24XX - fix time for osiris machine
Ben Dooks [Mon, 20 Mar 2006 17:10:03 +0000 (17:10 +0000)]
[ARM] 3329/1: S3C24XX - fix time for osiris machine

Patch from Ben Dooks

Add selection for timer code for the Simtec Osiris

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3327/1: S3C2410 - add osiris machine support
Ben Dooks [Mon, 20 Mar 2006 17:10:02 +0000 (17:10 +0000)]
[ARM] 3327/1: S3C2410 - add osiris machine support

Patch from Ben Dooks

Support for Simtec IM2440D20 CPU modules (Osiris)

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] 3261/2: remove phys_ram from struct machine_desc (part 3)
Nicolas Pitre [Mon, 20 Mar 2006 17:10:01 +0000 (17:10 +0000)]
[ARM] 3261/2: remove phys_ram from struct machine_desc (part 3)

Patch from Nicolas Pitre

This field is redundent since it must be equal to PHYS_OFFSET anyway.

There is no reference to it anymore so remove it at last.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] Collect Primecell PL01x-based debug implementations together
Russell King [Thu, 16 Mar 2006 20:50:34 +0000 (20:50 +0000)]
[ARM] Collect Primecell PL01x-based debug implementations together

Several ARM machine implementations used a PL01x primecell compatible
serial port for debugging purposes, and indepdently implemented the low
level debug macros every time.  Provide a common implementation and
convert these implementations to use this version.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] Collect 8250-based debug implementations together
Russell King [Thu, 16 Mar 2006 20:40:25 +0000 (20:40 +0000)]
[ARM] Collect 8250-based debug implementations together

Several ARM machine implementations used an 8250 compatible port for
debugging purposes, and indepdently implemented the low level debug
macros every time.  Provide a common implementation and convert these
implementations to use this version.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] Fix SA1100 debug-macros.S
Russell King [Wed, 15 Mar 2006 15:55:01 +0000 (15:55 +0000)]
[ARM] Fix SA1100 debug-macros.S

This needs asm/hardware.h - include it.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] Convert SA1111 to use clock architecture
Russell King [Wed, 15 Mar 2006 15:54:37 +0000 (15:54 +0000)]
[ARM] Convert SA1111 to use clock architecture

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] Adapt vic.c to allow for multiple VICs in a system.
Russell King [Wed, 15 Mar 2006 15:44:29 +0000 (15:44 +0000)]
[ARM] Adapt vic.c to allow for multiple VICs in a system.

Some SoCs have multiple VIC devices.  Adapt the generic vic code
to allow multiple implementations to be handled.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] Rename chipdata to 'base' and make it an iomem pointer
Russell King [Wed, 15 Mar 2006 15:43:04 +0000 (15:43 +0000)]
[ARM] Rename chipdata to 'base' and make it an iomem pointer

In all current use cases, "chipdata" is used to store an iomem address.
Mark it with __iomem, and rename it to 'base'.  Leave the accessor macros
alone.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] Move IRQ enable after coprocessor number decode
Russell King [Wed, 15 Mar 2006 12:33:43 +0000 (12:33 +0000)]
[ARM] Move IRQ enable after coprocessor number decode

Allow the individual coprocessor handlers to decide when to enable
interrupts, rather than unconditionally enabling them.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] Remove unnecessary asm/hardware.h includes
Russell King [Sat, 4 Mar 2006 11:04:12 +0000 (11:04 +0000)]
[ARM] Remove unnecessary asm/hardware.h includes

asm/hardware.h is not required for the majority of processor support
files, ioremap support, mm initialisation, acorn IO support, nor
the debug code (which picks up its machine specific includes via
debug-macros.S)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] Fix HZ definition for OMAP without 32K timer
Russell King [Sat, 4 Mar 2006 11:01:53 +0000 (11:01 +0000)]
[ARM] Fix HZ definition for OMAP without 32K timer

Unfortunately, OMAP platforms without the 32K timer left HZ set to
an empty value.  Fix this by making the dependency on OMAP_32K_TIMER
rather than OMAP_32K_TIMER_HZ.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] Remove asm/arch/irq.h
Russell King [Sat, 4 Mar 2006 10:37:07 +0000 (10:37 +0000)]
[ARM] Remove asm/arch/irq.h

asm/arch/irq.h used to be included from asm/irq.h, but was removed
from the ARM kernel a long time ago.  Consequently, the contents
of asm/arch/irq.h (which mostly contain a definition for fixup_irq())
have not been used.  Hence, remove asm/arch/irq.h.

Some machine support files incorrectly included this file, making
little or no use of the contents.  Move the contents to a local
include file, and remove those include statements as well.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years ago[ARM] Move HZ definition into Kconfig
Russell King [Thu, 2 Mar 2006 22:41:59 +0000 (22:41 +0000)]
[ARM] Move HZ definition into Kconfig

Move the HZ definition into Kconfig, and set appropriate defaults
for platforms.  Remove mostly empty asm/arch/param.h include file.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Tue, 21 Mar 2006 17:33:19 +0000 (09:33 -0800)]
Merge /pub/scm/linux/kernel/git/herbert/crypto-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] aes: Fixed array boundary violation
  [CRYPTO] tcrypt: Fix key alignment
  [CRYPTO] all: Add missing cra_alignmask
  [CRYPTO] all: Use kzalloc where possible
  [CRYPTO] api: Align tfm context as wide as possible
  [CRYPTO] twofish: Use rol32/ror32 where appropriate

18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Tue, 21 Mar 2006 17:31:48 +0000 (09:31 -0800)]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (235 commits)
  [NETFILTER]: Add H.323 conntrack/NAT helper
  [TG3]: Don't mark tg3_test_registers() as returning const.
  [IPV6]: Cleanups for net/ipv6/addrconf.c (kzalloc, early exit) v2
  [IPV6]: Nearly complete kzalloc cleanup for net/ipv6
  [IPV6]: Cleanup of net/ipv6/reassambly.c
  [BRIDGE]: Remove duplicate const from is_link_local() argument type.
  [DECNET]: net/decnet/dn_route.c: fix inconsequent NULL checking
  [TG3]: make drivers/net/tg3.c:tg3_request_irq() static
  [BRIDGE]: use LLC to send STP
  [LLC]: llc_mac_hdr_init const arguments
  [BRIDGE]: allow show/store of group multicast address
  [BRIDGE]: use llc for receiving STP packets
  [BRIDGE]: stp timer to jiffies cleanup
  [BRIDGE]: forwarding remove unneeded preempt and bh diasables
  [BRIDGE]: netfilter inline cleanup
  [BRIDGE]: netfilter VLAN macro cleanup
  [BRIDGE]: netfilter dont use __constant_htons
  [BRIDGE]: netfilter whitespace
  [BRIDGE]: optimize frame pass up
  [BRIDGE]: use kzalloc
  ...

18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Tue, 21 Mar 2006 17:25:47 +0000 (09:25 -0800)]
Merge /pub/scm/linux/kernel/git/gregkh/usb-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (81 commits)
  [PATCH] USB: omninet: fix up debugging comments
  [PATCH] USB serial: add navman driver
  [PATCH] USB: Fix irda-usb use after use
  [PATCH] USB: rtl8150 small fix
  [PATCH] USB: ftdi_sio: add Icom ID1 USB product and vendor ids
  [PATCH] USB: cp2101: add new device IDs
  [PATCH] USB: fix check_ctrlrecip to allow control transfers in state ADDRESS
  [PATCH] USB: vicam.c: fix a NULL pointer dereference
  [PATCH] USB: ZC0301 driver bugfix
  [PATCH] USB: add support for Creativelabs Silvercrest USB keyboard
  [PATCH] USB: storage: new unusual_devs.h entry: Mitsumi 7in1 Card Reader
  [PATCH] USB: storage: unusual_devs.h entry 0420:0001
  [PATCH] USB: storage: another unusual_devs.h entry
  [PATCH] USB: storage: sandisk unusual_devices entry
  [PATCH] USB: fix initdata issue in isp116x-hcd
  [PATCH] USB: usbcore: usb_set_configuration oops (NULL ptr dereference)
  [PATCH] USB: usbcore: Don't assume a USB configuration includes any interfaces
  [PATCH] USB: ub 03 drop stall clearing
  [PATCH] USB: ub 02 remove diag
  [PATCH] USB: ub 01 remove first_open
  ...

18 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
Linus Torvalds [Tue, 21 Mar 2006 17:25:15 +0000 (09:25 -0800)]
Merge /pub/scm/linux/kernel/git/gregkh/driver-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (23 commits)
  [PATCH] sysfs: fix a kobject leak in sysfs_add_link on the error path
  [PATCH] sysfs: don't export dir symbols
  [PATCH] get_cpu_sysdev() signedness fix
  [PATCH] kobject_add_dir
  [PATCH] debugfs: Add debugfs_create_blob() helper for exporting binary data
  [PATCH] sysfs: fix problem with duplicate sysfs directories and files
  [PATCH] Kobject: kobject.h: fix a typo
  [PATCH] Kobject: provide better warning messages when people do stupid things
  [PATCH] Driver core: add macros notice(), dev_notice()
  [PATCH] firmware: fix BUG: in fw_realloc_buffer
  [PATCH] sysfs: kzalloc conversion
  [PATCH] fix module sysfs files reference counting
  [PATCH] add EXPORT_SYMBOL_GPL_FUTURE() to USB subsystem
  [PATCH] add EXPORT_SYMBOL_GPL_FUTURE() to RCU subsystem
  [PATCH] add EXPORT_SYMBOL_GPL_FUTURE()
  [PATCH] Clean up module.c symbol searching logic
  [PATCH] kobj_map semaphore to mutex conversion
  [PATCH] kref: avoid an atomic operation in kref_put()
  [PATCH] handle errors returned by platform_get_irq*()
  [PATCH] driver core: platform_get_irq*(): return -ENXIO on error
  ...

18 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
Linus Torvalds [Tue, 21 Mar 2006 17:23:46 +0000 (09:23 -0800)]
Merge git://git./linux/kernel/git/bunk/trivial

* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial:
  README: bzip2 is not new
  Documentation/Changes: remove outdated translation references
  remove dead Radeon URL
  SCSI_AACRAID: add a help text
  update the i386 defconfig
  MAINTAINERS: remove the LANMEDIA entry
  Move ip2.c and ip2main.c to drivers/char/ip2/ where the other files

18 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Tue, 21 Mar 2006 17:22:41 +0000 (09:22 -0800)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Update defconfigs.
  [MIPS] Separate CPU entries in /proc/cpuinfo with a blank line.
  [MIPS] sys_mmap2 offset argument should always be shifted 12, not PAGE_SHIFT.
  [MIPS] TX49XX has prefetch.
  [MIPS] Kill tlb-andes.c.
  [MIPS] War on whitespace: cleanup initial spaces followed by tabs.
  [MIPS] Makefile crapectomy.
  [MIPS] Reformat __xchg().
  [MIPS] Mention Broadcom part number for BigSur board
  [MIPS] Remove CONFIG_BUILD_ELF64.
  [MIPS] Further sparsification for 32-bit compat code.
  [MIPS] fix wrong __user usage in _sysn32_rt_sigsuspend
  [MIPS] Signal cleanup
  [MIPS] Reformat all of signal32.c with tabs instead of space for consistency
  [MIPS] Delete unused sys32_waitpid.
  [MIPS] Make I/O helpers more customizable
  [MIPS] Symmetric Uniprocessor support for Qemu.
  [MIPS] sc-rm7k.c cleanup
  [MIPS] MIPS64 R2 optimizations for 64-bit endianess swapping.
  [MIPS] Add early console for Cobalt.

18 years agoMerge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
Linus Torvalds [Tue, 21 Mar 2006 17:22:08 +0000 (09:22 -0800)]
Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: (47 commits)
  IB/mthca: Query SRQ srq_limit fixes
  IPoIB: Get rid of useless test of queue length
  IB/mthca: Correct reported SRQ size in MemFree case.
  IB/mad: Fix oopsable race on device removal
  IB/srp: Coverity fix to srp_parse_options()
  IB/mthca: Coverity fix to mthca_init_eq_table()
  IB: Coverity fixes to sysfs.c
  IPoIB: Move ipoib_ib_dev_flush() to ipoib workqueue
  IPoIB: Fix build now that neighbour destructor is in neigh_params
  IB/uverbs: Use correct alt_pkey_index in modify QP
  IB/umad: Add support for large RMPP transfers
  IB/srp: Add SCSI host attributes to show target port
  IB/cm: Check cm_id state before handling a REP
  IB/mthca: Update firmware versions
  IB/mthca: Optimize large messages on Sinai HCAs
  IB/uverbs: Fix query QP return of sq_sig_all
  IB: Fix modify QP checking of "current QP state" attribute
  IPoIB: Fix multicast race between canceling and completing
  IPoIB: Clean up if posting receives fails
  IB/mthca: Use an enum for HCA page size
  ...

18 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Tue, 21 Mar 2006 17:20:47 +0000 (09:20 -0800)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] Fix cosmetic typo in asm/irq.h
  [ARM] 3367/1: CLCD mode no longer supported on the RealView boards
  [ARM] 3366/1: Allow the 16bpp mode configuration in the CLCD control register

18 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Tue, 21 Mar 2006 17:20:12 +0000 (09:20 -0800)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (112 commits)
  [libata] sata_mv: fix irq port status usage
  [PATCH] libata: move IDENTIFY info printing from ata_dev_read_id() to ata_dev_configure()
  [PATCH] libata: use local *id instead of dev->id in ata_dev_configure()
  [PATCH] libata: check Word 88 validity in ata_id_xfer_mask()
  [PATCH] libata: fix class handling in ata_bus_probe()
  [PATCH] ahci: enable prefetching for PACKET commands
  libata: turn on ATAPI by default
  [PATCH] sata_sil24: lengthen softreset timeout
  [PATCH] sata_sil24: exit early from softreset if SStatus reports no device
  [PATCH] libata: fix missing classes[] initialization in ata_bus_probe()
  [PATCH] libata: kill unused xfer_mode functions
  [PATCH] libata: reimplement ata_set_mode() using xfer_mask helpers
  [PATCH] libata: use xfer_mask helpers in ata_dev_set_mode()
  [PATCH] libata: use ata_id_xfermask() in ata_dev_configure()
  [PATCH] libata: add xfer_mask handling functions
  [PATCH] libata: improve xfer mask constants and update ata_mode_string()
  [PATCH] libata: rename ATA_FLAG_FLUSH_PIO_TASK to ATA_FLAG_FLUSH_PORT_TASK
  [PATCH] libata: kill unused pio_task and packet_task
  [PATCH] libata: convert pio_task and packet_task to port_task
  [PATCH] libata: implement port_task
  ...

18 years agoMerge kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git with fixups
Linus Torvalds [Tue, 21 Mar 2006 17:01:08 +0000 (09:01 -0800)]
Merge /linux/kernel/git/mchehab/v4l-dvb.git with fixups

This merges the DVB tree, but fixes up the history that had gotten
screwed up by a broken commit.

The history is fixed up by re-doing the commit properly (taking the
resolve from the final result of the original), and then cherry-picking
the commits that followed the broken merge.

* dvb: (190 commits)
  V4L/DVB (3545): Fixed no_overlay option and quirks on saa7134 driver
  V4L/DVB (3543): Fix Makefile to adapt to bt8xx/ conversion
  V4L/DVB (3538): Bt8xx documentation update
  V4L/DVB (3537a): Whitespace cleanup
  V4L/DVB (3533): Add WSS (wide screen signalling) module parameters
  V4L/DVB (3532): Moved duplicated code of ALPS BSRU6 tuner to a standalone file.
  V4L/DVB (3530): Kconfig: remove VIDEO_AUDIO_DECODER
  V4L/DVB (3529): Kconfig: add menu items for cs53l32a and wm8775 A/D converters
  V4L/DVB (3528): Kconfig: fix ATSC frontend menu item names by manufacturer
  V4L/DVB (3527): VIDEO_CPIA2 must depend on USB
  V4L/DVB (3525): Kconfig: remove VIDEO_DECODER
  V4L/DVB (3524): Kconfig: add menu items for saa7115 and saa7127
  V4L/DVB (3494): Kconfig: select VIDEO_MSP3400 to build msp3400.ko
  V4L/DVB (3522): Fixed a trouble with other PAL standards
  V4L/DVB (3521): Avoid warnings at video-buf.c
  V4L/DVB (3514): SAA7113 doesn't have auto std chroma detection mode
  V4L/DVB (3513): Remove saa711x driver
  V4L/DVB (3509): Make a needlessly global function static.
  V4L/DVB (3506): Cinergy T2 dmx cleanup on disconnect
  V4L/DVB (3504): Medion 7134: Autodetect second bridge chip
  ...

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
18 years agoV4L/DVB (3545): Fixed no_overlay option and quirks on saa7134 driver
Mauro Carvalho Chehab [Fri, 17 Mar 2006 23:54:32 +0000 (20:54 -0300)]
V4L/DVB (3545): Fixed no_overlay option and quirks on saa7134 driver

Some chipsets have several problems when pci to pci transfers are activated
on overlay mode. the option no_overlay allows disabling such feature of
the driver, in favor of keeping the system stable.
The default is to use pcipci_fail flag defined on drivers/pci/quirks.c.
It also allows the user to override it by forcing disable overlay or forcing
enable. Forcing enable may generate PCI transfer corruption, including disk
mass corruption, so should be used with care.
Added a text description to this option and make messages looks the same at
both bttv and saa7134 drivers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3543): Fix Makefile to adapt to bt8xx/ conversion
Manu Abraham [Fri, 17 Mar 2006 21:21:17 +0000 (18:21 -0300)]
V4L/DVB (3543): Fix Makefile to adapt to bt8xx/ conversion

Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3538): Bt8xx documentation update
Uwe Bugla [Thu, 16 Mar 2006 23:37:05 +0000 (20:37 -0300)]
V4L/DVB (3538): Bt8xx documentation update

Signed-off-by: Uwe Bugla <uwe.bugla@gmx.de>
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3537a): Whitespace cleanup
Mauro Carvalho Chehab [Fri, 17 Mar 2006 13:37:02 +0000 (10:37 -0300)]
V4L/DVB (3537a): Whitespace cleanup

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3533): Add WSS (wide screen signalling) module parameters
Oliver Endriss [Fri, 17 Mar 2006 08:29:15 +0000 (05:29 -0300)]
V4L/DVB (3533): Add WSS (wide screen signalling) module parameters

Add wss_cfg_4_3 and wss_cfg_16_9 configuration options.
Firmware 2623 or later required.
Both parameters are bit masks:
- bit 15: disable WSS
- bit 14: send short WSS burst, then turn off WSS
- bit 13..0: WSS bits as specified by the standard
These parameters are useful if you own a broken tv set which
does not handle wss correctly.
Default settings:
- wss_cfg_4_3: 0x4008
- wss_cfg_16_9: 0x0007
These should work with most devices.

Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3532): Moved duplicated code of ALPS BSRU6 tuner to a standalone file.
Perceval Anichini [Thu, 16 Mar 2006 14:22:47 +0000 (11:22 -0300)]
V4L/DVB (3532): Moved duplicated code of ALPS BSRU6 tuner to a standalone file.

Moved duplicated code of ALPS BSRU6 tuner to a standalone file.
Modified av7110 and budget drivers to include the new file.

Signed-off-by: Perceval Anichini <perceval.anichini@streamvision.fr>
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3530): Kconfig: remove VIDEO_AUDIO_DECODER
Michael Krufky [Thu, 16 Mar 2006 17:53:23 +0000 (14:53 -0300)]
V4L/DVB (3530): Kconfig: remove VIDEO_AUDIO_DECODER

- removed VIDEO_AUDIO_DECODER Kconfig menu item.
  VIDEO_MSP3400, VIDEO_CS53L32A and VIDEO_WM8775 now
  each have their own menu items.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3529): Kconfig: add menu items for cs53l32a and wm8775 A/D converters
Michael Krufky [Thu, 16 Mar 2006 17:48:38 +0000 (14:48 -0300)]
V4L/DVB (3529): Kconfig: add menu items for cs53l32a and wm8775 A/D converters

- created Kconfig item, VIDEO_CS53L32A, for the cs53l32a module which supports
  the Cirrus Logic CS53L32A Low Voltage Stereo A/D Converter.
- created Kconfig item, VIDEO_WM8775, for the wm8775 module which supports
  the Wolfson Microelectronics WM8775 high performance stereo A/D Converter.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3528): Kconfig: fix ATSC frontend menu item names by manufacturer
Michael Krufky [Thu, 16 Mar 2006 16:18:25 +0000 (13:18 -0300)]
V4L/DVB (3528): Kconfig: fix ATSC frontend menu item names by manufacturer

- Corrected typo for NxtWave NXT200X
- Added "Oren" manufacturer name to menu items for OR51132 and OR51211
- Removed "(pcHDTV HDx000 card)" from Oren frontends menu item names,
  This isn't necessary, as these frontends are selected by the card drivers,
  build configuration (DVB_BT8XX and VIDEO_CX88_DVB).

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3527): VIDEO_CPIA2 must depend on USB
Adrian Bunk [Thu, 16 Mar 2006 15:53:53 +0000 (12:53 -0300)]
V4L/DVB (3527): VIDEO_CPIA2 must depend on USB

CONFIG_VIDEO_CPIA2=y, CONFIG_USB=n results in the following compile
<--  snip  -->
...
  LD      .tmp_vmlinux1
drivers/built-in.o: In function `set_alternate':cpia2_usb.c:(.text+0x443aa2): undefined reference to `usb_set_interface'
drivers/built-in.o: In function `cpia2_usb_stream_resume': undefined reference to `usb_alloc_urb'
drivers/built-in.o: In function `cpia2_usb_stream_resume': undefined reference to `usb_submit_urb'
drivers/built-in.o: In function `cpia2_usb_stream_pause': undefined reference to `usb_kill_urb'
drivers/built-in.o: In function `cpia2_usb_stream_pause': undefined reference to `usb_free_urb'
drivers/built-in.o: In function `cpia2_usb_disconnect':cpia2_usb.c:(.text+0x443e14): undefined reference to `usb_driver_release_interface'
drivers/built-in.o: In function `cpia2_usb_transfer_cmd': undefined reference to `usb_control_msg'
drivers/built-in.o: In function `cpia2_usb_transfer_cmd': undefined reference to `usb_control_msg'
drivers/built-in.o: In function `cpia2_usb_complete':cpia2_usb.c:(.text+0x444836): undefined reference to `usb_submit_urb'
drivers/built-in.o: In function `cpia2_usb_cleanup': undefined reference to `usb_deregister'
drivers/built-in.o: In function `cpia2_usb_init': undefined reference to `usb_register_driver'

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3525): Kconfig: remove VIDEO_DECODER
Michael Krufky [Thu, 16 Mar 2006 05:59:09 +0000 (02:59 -0300)]
V4L/DVB (3525): Kconfig: remove VIDEO_DECODER

- removed VIDEO_DECODER Kconfig menu item.
  VIDEO_CX25840, VIDEO_SAA711X and VIDEO_SAA7127 now
  each have their own menu items.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3524): Kconfig: add menu items for saa7115 and saa7127
Michael Krufky [Thu, 16 Mar 2006 05:53:14 +0000 (02:53 -0300)]
V4L/DVB (3524): Kconfig: add menu items for saa7115 and saa7127

- created Kconfig menu item, VIDEO_SAA711X, for the saa7115 module,
  which supports SAA7113, SAA7114 and SAA7115 video decoders.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3494): Kconfig: select VIDEO_MSP3400 to build msp3400.ko
Michael Krufky [Tue, 14 Mar 2006 02:44:31 +0000 (23:44 -0300)]
V4L/DVB (3494): Kconfig: select VIDEO_MSP3400 to build msp3400.ko

The msp3400 driver is currently only being built if
the bttv driver is selected. There are new drivers
that will be needing msp3400, so simply including
msp3400 in the Makefile is no longer appropriate.
This patch creates VIDEO_MSP3400, and alters VIDEO_BT848, VIDEO_PVRUSB2
and VIDEO_AUDIO_DECODER each to select VIDEO_MSP3400.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3522): Fixed a trouble with other PAL standards
Mauro Carvalho Chehab [Thu, 16 Mar 2006 21:44:07 +0000 (18:44 -0300)]
V4L/DVB (3522): Fixed a trouble with other PAL standards

V4L2_STD_PAL define is not correct. It specifies only 50Hz PAL standards.
This patch fixes saa7113 color config for other PAL video standards.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3521): Avoid warnings at video-buf.c
Mauro Carvalho Chehab [Wed, 15 Mar 2006 20:52:14 +0000 (17:52 -0300)]
V4L/DVB (3521): Avoid warnings at video-buf.c

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3514): SAA7113 doesn't have auto std chroma detection mode
Mauro Carvalho Chehab [Tue, 14 Mar 2006 19:33:33 +0000 (16:33 -0300)]
V4L/DVB (3514): SAA7113 doesn't have auto std chroma detection mode

This patch makes chroma standard selection based at possible values,
according with datasheet.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3513): Remove saa711x driver
Mauro Carvalho Chehab [Mon, 13 Mar 2006 16:31:31 +0000 (13:31 -0300)]
V4L/DVB (3513): Remove saa711x driver

Now, em28xx uses saa7115 instead of saa711x.
saa7115 driver is capable of handling saa 7113, 7114 and 7115.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3509): Make a needlessly global function static.
Adrian Bunk [Wed, 15 Mar 2006 19:17:11 +0000 (16:17 -0300)]
V4L/DVB (3509): Make a needlessly global function static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3506): Cinergy T2 dmx cleanup on disconnect
Markus Rechberger [Wed, 15 Mar 2006 12:31:31 +0000 (09:31 -0300)]
V4L/DVB (3506): Cinergy T2 dmx cleanup on disconnect

Detaching the device didn't clean up several device files in /dev/dvb,
after applying that patch all dvb devices disappeared as expected.

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3504): Medion 7134: Autodetect second bridge chip
Michael Krufky [Tue, 14 Mar 2006 22:02:12 +0000 (19:02 -0300)]
V4L/DVB (3504): Medion 7134: Autodetect second bridge chip

The device, Medion 7134, has two saa7134 chips on it, but only one of them
is functional in the current saa7134 driver.
This patch adds autodetection for the second, unsupported saa7134 chip,
as SAA7134_BOARD_MD7134_BRIDGE_2, and displays a message to the user
(in dmesg) indicating that the second chip isn't yet functional.
This is useful for users, since two instances of the saa7134 driver
will spawn. This patch will prevent confusion by warning the user that
only one of the chips on the board are functional.
There are other versions of the SAA7134_BOARD_MD7134 with only a single
saa7134 bridge/decoder -- those devices will not be affected by this patch.
Only devices containing the second chip will display the warning.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3503): Whitespace: fix incorrect indentation of curly bracket
Michael Krufky [Tue, 14 Mar 2006 19:18:49 +0000 (16:18 -0300)]
V4L/DVB (3503): Whitespace: fix incorrect indentation of curly bracket

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3502): Saa7134: make unsupported secondary decoder message generic
Michael Krufky [Tue, 14 Mar 2006 19:07:42 +0000 (16:07 -0300)]
V4L/DVB (3502): Saa7134: make unsupported secondary decoder message generic

There are already some supported devices that contain two
saa713x chips on-board, where only one of these chips is
currently functional in the driver.
We are already printing a warning message for the second
saa7134 decoder in SAA7134_BOARD_AVERMEDIA_A169_B. This
patch alters that case to make it generic, so that other
cards in the same situation can use it.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3501): Dmxdev: use dvb_ringbuffer
Andreas Oberritter [Tue, 14 Mar 2006 20:31:01 +0000 (17:31 -0300)]
V4L/DVB (3501): Dmxdev: use dvb_ringbuffer

Use dvb_ringbuffer instead of an own buffer implementation in
dmxdev.[ch].

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3500): Ringbuffer: don't reset pointers to zero
Andreas Oberritter [Tue, 14 Mar 2006 20:30:09 +0000 (17:30 -0300)]
V4L/DVB (3500): Ringbuffer: don't reset pointers to zero

Oliver Endriss spotted, that resetting read and write pointers on
flush() requires additional locking and breaks the av7110 driver.
Therefore this patch partially reverts the previous patch titled "make
dvb_ringbuffer compatible to dmxdev_buffer".

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3499): Fix a bug when more than MAXBOARDS were plugged on em28xx
Mauro Carvalho Chehab [Tue, 14 Mar 2006 20:24:57 +0000 (17:24 -0300)]
V4L/DVB (3499): Fix a bug when more than MAXBOARDS were plugged on em28xx

Coverity reported a bug at checking max number of supported boards by
em28xx init code.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3497): Remove redundant makefile inclusion of tuner.o
Michael Krufky [Tue, 14 Mar 2006 04:25:01 +0000 (01:25 -0300)]
V4L/DVB (3497): Remove redundant makefile inclusion of tuner.o

VIDEO_MXB selects VIDEO_TUNER, so we don't have to include tuner.o
in the Makefile.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3496): Cpia2: move Kconfig build logic into cpia2/Kconfig
Michael Krufky [Tue, 14 Mar 2006 03:52:20 +0000 (00:52 -0300)]
V4L/DVB (3496): Cpia2: move Kconfig build logic into cpia2/Kconfig

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3495): Kconfig: select VIDEO_CX25840 to build cx25840 a/v decoder module
Michael Krufky [Tue, 14 Mar 2006 03:35:07 +0000 (00:35 -0300)]
V4L/DVB (3495): Kconfig: select VIDEO_CX25840 to build cx25840 a/v decoder module

The cx25840 module requires external firmware in order to function,
so it must select FW_LOADER, but saa7115 and saa7129 do not require it.
This patch creates VIDEO_CX25840, and alters VIDEO_DECODER to select it.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3488): Snd_cx88_create: don't dereference NULL core
Duncan Sands [Tue, 14 Mar 2006 15:12:39 +0000 (12:12 -0300)]
V4L/DVB (3488): Snd_cx88_create: don't dereference NULL core

If the call to cx88_core_get returns a NULL value, it is dereferenced
by cx88_reset, and perhaps by cx88_core_put.  Spotted by the Coverity
checker.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3485): BUG_ON() Conversion in drivers/video/media
Eric Sesterhenn [Mon, 13 Mar 2006 16:17:11 +0000 (13:17 -0300)]
V4L/DVB (3485): BUG_ON() Conversion in drivers/video/media

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3484): Make dvb_ringbuffer compatible to dmxdev_buffer
Andreas Oberritter [Mon, 13 Mar 2006 16:14:34 +0000 (13:14 -0300)]
V4L/DVB (3484): Make dvb_ringbuffer compatible to dmxdev_buffer

Added variable 'error' to struct dvb_ringbuffer, which is set to zero on
init() and flush(). Also reset read an write pointers to zero on flush()
to get less fragmented data.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3479): Cleanup mangled whitespace
Michael Krufky [Mon, 13 Mar 2006 06:41:44 +0000 (03:41 -0300)]
V4L/DVB (3479): Cleanup mangled whitespace

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3449): Cx88 default picture controls values
Marcin Rudowski [Sun, 12 Mar 2006 03:03:47 +0000 (00:03 -0300)]
V4L/DVB (3449): Cx88 default picture controls values

This patch fixes default values for some picture controls:
 - brightness set to 50% by default (now is 0%)
 - hue set to 50% by default (now is 0%)
 - sets saturation to datasheet value
 - volume set to 0dB (now is -32dB)
and some left small fixes:
 - twice offset adding
 - balance didn't follow datasheet (bits[0:5] = attenuation;
   bit[6] = channel to provide attenuation)

Signed-off-by: Marcin Rudowski <mar_rud@poczta.onet.pl>
Signed-off-by: Ian Pickworth <ian@pickworth.me.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3448): Cx88-input.c: add IR remote control support to CX88_BOARD_PROLINK_PLA...
Matheus Izvekov [Sun, 12 Mar 2006 02:54:58 +0000 (23:54 -0300)]
V4L/DVB (3448): Cx88-input.c: add IR remote control support to CX88_BOARD_PROLINK_PLAYTVPVR

This patch adds support for the IR remote control found in the card
CX88_BOARD_PROLINK_PLAYTVPVR.

Signed-off-by: Matheus Izvekov <mizvekov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3447): Cx88-cards.c: fix values of gpio0 for card CX88_BOARD_PROLINK_PLAYTVPVR
Matheus Izvekov [Sun, 12 Mar 2006 02:54:24 +0000 (23:54 -0300)]
V4L/DVB (3447): Cx88-cards.c: fix values of gpio0 for card CX88_BOARD_PROLINK_PLAYTVPVR

This patch changes the gpio0 values for the card CX88_BOARD_PROLINK_PLAYTVPVR
to the ones observed using RegSpy from the dscaler project.

Signed-off-by: Matheus Izvekov <mizvekov@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3446): Saa7134: add support for AVerMedia A169 Dual Analog tuner card
Rickard Osser [Sat, 11 Mar 2006 20:14:12 +0000 (17:14 -0300)]
V4L/DVB (3446): Saa7134: add support for AVerMedia A169 Dual Analog tuner card

- Added support for AVerMedia A169 Dual Analog tuner card
  (dual saa7134 decoders - only 1 working right now)
- Added autodetection for both parts of the card.
  It shows up like 2 cards, B1 and B
- Enabled tuner B1, SVIDEO on B1 and composite1 through SVIDEO,
  FIXME: B is more or less dead at this point and I suspect the
  FM-radio is on the B part of the board

Signed-off-by: Rickard Osser <ricky@osser.se>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3445): LG TALN series: add PAL / SECAM support
Michael Krufky [Sat, 11 Mar 2006 20:02:01 +0000 (17:02 -0300)]
V4L/DVB (3445): LG TALN series: add PAL / SECAM support

- added tuner_lg_taln_pal_secam_ranges
- renamed tuner 66 from TUNER_LG_NTSC_TALN_MINI to TUNER_LG_TALN
- updated FlyTV mini Asus Digimatrix with new tuner

Thanks-to: Rickard Osser <ricky@osser.se>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3444): Saa7134: small whitespace cleanup
Michael Krufky [Sat, 11 Mar 2006 19:21:36 +0000 (16:21 -0300)]
V4L/DVB (3444): Saa7134: small whitespace cleanup

- matched indents on quotes within a printk

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3443): Thomson FE6600: add missing "count" array element
Michael Krufky [Sat, 11 Mar 2006 19:12:35 +0000 (16:12 -0300)]
V4L/DVB (3443): Thomson FE6600: add missing "count" array element

- added missing "count" element in Thomson FE6600

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3439): Added no_overlay option and quirks to saa7134
Mauro Carvalho Chehab [Fri, 10 Mar 2006 19:46:50 +0000 (16:46 -0300)]
V4L/DVB (3439): Added no_overlay option and quirks to saa7134

Some chipsets have several problems when pci to pci transfers are activated
on overlay mode. the option no_overlay allows disabling such feature of
the driver, in favor of keeping the system stable.
The default is to use pcipci_fail flag defined on drivers/pci/quirks.c.
It also allows the user to override it by forcing disable overlay or forcing
enable. Forcing enable may generate PCI transfer corruption, including disk
mass corruption, so should be used with care.
Added a text description to this option and make messages looks the same at
both bttv and saa7134 drivers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3438): Optical cleanup for dmxdev.c
Andreas Oberritter [Fri, 10 Mar 2006 18:22:31 +0000 (15:22 -0300)]
V4L/DVB (3438): Optical cleanup for dmxdev.c

Used Lindent, manually changed some line breaks. Removed invalid email
addresses, useless casts and useless initialization of return values.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3437): Fix typo in enum name and use enum in struct dmxdev_filter
Andreas Oberritter [Fri, 10 Mar 2006 18:21:58 +0000 (15:21 -0300)]
V4L/DVB (3437): Fix typo in enum name and use enum in struct dmxdev_filter

Rename 'enum dmxdevype' to 'enum dmxdev_type' and use this enum instead
of int for the member 'type' of struct dmxdev_filter.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3436): Remove 'dvbdev' from struct dmxdev_filter
Andreas Oberritter [Fri, 10 Mar 2006 18:21:43 +0000 (15:21 -0300)]
V4L/DVB (3436): Remove 'dvbdev' from struct dmxdev_filter

The member dvbdev gets initialized once but is never used after that.

Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3435): Remove 'pid' from struct dmxdev_filter
Andreas Oberritter [Fri, 10 Mar 2006 18:21:28 +0000 (15:21 -0300)]
V4L/DVB (3435): Remove 'pid' from struct dmxdev_filter

The PID value is already stored in struct dmx_sct_filter_params which is
a member of struct dmxdev_filter.
Acked-by: Johannes Stezenbach <js@linuxtv.org>
Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3425): Correct gpio values for Aver 303 Studio in v4l-dvb tree
Marcin Rudowski [Thu, 9 Mar 2006 19:09:51 +0000 (16:09 -0300)]
V4L/DVB (3425): Correct gpio values for Aver 303 Studio in v4l-dvb tree

Old values generally works in A2 mono, but new ones allows:
- detect and use Nicam stereo
- mute in tv
- use radio FM

Signed-off-by: Marcin Rudowski <mar_rud@poczta.onet.pl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3424): Updated CARDLIST.tuner with newer tenna string
Mauro Carvalho Chehab [Thu, 9 Mar 2006 19:09:20 +0000 (16:09 -0300)]
V4L/DVB (3424): Updated CARDLIST.tuner with newer tenna string

Also Removed whitespaces introduced by previous tena patch

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3423): Fix cx88 error messages on balance change
Ian Pickworth [Thu, 9 Mar 2006 15:03:40 +0000 (12:03 -0300)]
V4L/DVB (3423): Fix cx88 error messages on balance change

There is an error in the cx88 code that causes this message in the syslog when
balance is changed at full volume:
Mar  4 18:35:08 ian2 kernel: cx88[0]: irq pci [0x1] vid*
Mar  4 18:35:39 ian2 last message repeated 348 times
Mar  4 18:36:01 ian2 last message repeated 564 times
... and so on
The attached patch cures this problem.

Signed-off-by: Ian Pickworth <ian@pickworth.me.uk>
Signed-off-by: Marcin Rudowski <mar_rud@poczta.onet.pl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3420): Nskips maybe used uninitialized in bttv_risc_overlay
Duncan Sands [Thu, 9 Mar 2006 14:20:14 +0000 (11:20 -0300)]
V4L/DVB (3420): Nskips maybe used uninitialized in bttv_risc_overlay

The Coverity checker (previously Stanford checker) noticed that
the value of nskips could be read even if it was never written.

Signed-off-by: Duncan Sands <baldrick@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoV4L/DVB (3419): This patch fixes Tuner TNF5335 family
Mauro Carvalho Chehab [Thu, 9 Mar 2006 14:17:43 +0000 (11:17 -0300)]
V4L/DVB (3419): This patch fixes Tuner TNF5335 family

Radio now works.
Tuner now supports both PAL/D and STD/MN models

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
18 years agoMerge branch 'origin'
Linus Torvalds [Tue, 21 Mar 2006 16:52:18 +0000 (08:52 -0800)]
Merge branch 'origin'

Conflicts:
Documentation/video4linux/CARDLIST.cx88
drivers/media/video/cx88/Kconfig
drivers/media/video/em28xx/em28xx-video.c
drivers/media/video/saa7134/saa7134-dvb.c

Resolved as in the original merge by Mauro Carvalho Chehab

18 years ago[MIPS] Update defconfigs.
Ralf Baechle [Tue, 21 Mar 2006 13:27:48 +0000 (13:27 +0000)]
[MIPS] Update defconfigs.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
18 years ago[MIPS] Separate CPU entries in /proc/cpuinfo with a blank line.
Martin Michlmayr [Mon, 20 Mar 2006 02:51:20 +0000 (02:51 +0000)]
[MIPS] Separate CPU entries in /proc/cpuinfo with a blank line.

Put in a blank line between CPU entries in /proc/cpuinfo, just like
most other architectures (i386, ia64, x86_64) do.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---