Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-algo-bit: Add pre- and post-xfer hooks
  at24: Init dynamic bin_attribute structures
  i2c: Drop configure option I2C_DEBUG_CHIP
  tsl2550: Move from i2c/chips to misc
  i2c-i801: Don't use the block buffer for I2C block writes
  i2c-powermac: Be less verbose in the absence of real errors.
  i2c-smbus: Use device_lock/device_unlock

Merge branch 'for-linus' of git://git./linux/kernel/git/ericvh/v9fs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: Skip check for mandatory locks when unlocking
  9p: Fixes a simple bug enabling writes beyond 2GB.
  9p: Change the name of new protocol from 9p2010.L to 9p2000.L
  fs/9p: re-init the wstat in readdir loop
  net/9p: Add sysfs mount_tag file for virtio 9P device
  net/9p: Use the tag name in the config space for identifying mount point

Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Add very basic XVR-1000 framebuffer driver.
  qlogicpti: Remove slash in QlogicPTI irq name

sparc64: Add very basic XVR-1000 framebuffer driver.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Frans van Berckel <fberckel@xs4all.nl>

Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (108 commits)
  bridge: ensure to unlock in error path in br_multicast_query().
  drivers/net/tulip/eeprom.c: fix bogus "(null)" in tulip init messages
  sky2: Avoid rtnl_unlock without rtnl_lock
  ipv6: Send netlink notification when DAD fails
  drivers/net/tg3.c: change the field used with the TG3_FLAG_10_100_ONLY constant
  ipconfig: Handle devices which take some time to come up.
  mac80211: Fix memory leak in ieee80211_if_write()
  mac80211: Fix (dynamic) power save entry
  ipw2200: use kmalloc for large local variables
  ath5k: read eeprom IQ calibration values correctly for G mode
  ath5k: fix I/Q calibration (for real)
  ath5k: fix TSF reset
  ath5k: use fixed antenna for tx descriptors
  libipw: split ieee->networks into small pieces
  mac80211: Fix sta_mtx unlocking on insert STA failure path
  rt2x00: remove KSEG1ADDR define from rt2x00soc.h
  net: add ColdFire support to the smc91x driver
  asix: fix setting mac address for AX88772
  ipv6 ip6_tunnel: eliminate unused recursion field from ip6_tnl{}.
  net: Fix dev_mc_add()
  ...

Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix pick_next_highest_task_rt() for cgroups
  sched: Cleanup: remove unused variable in try_to_wake_up()
  x86: Fix sched_clock_cpu for systems with unsynchronized TSC

Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, k8 nb: Fix boot crash: enable k8_northbridges unconditionally on AMD systems
  x86, UV: Fix target_cpus() in x2apic_uv_x.c
  x86: Reduce per cpu warning boot up messages
  x86: Reduce per cpu MCA boot up messages
  x86_64, cpa: Don't work hard in preserving kernel 2M mappings when using 4K already

Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  locking: Make sparse work with inline spinlocks and rwlocks
  x86/mce: Fix RCU lockdep splats
  rcu: Increase RCU CPU stall timeouts if PROVE_RCU
  ftrace: Replace read_barrier_depends() with rcu_dereference_raw()
  rcu: Suppress RCU lockdep warnings during early boot
  rcu, ftrace: Fix RCU lockdep splat in ftrace_perf_buf_prepare()
  rcu: Suppress __mpol_dup() false positive from RCU lockdep
  rcu: Make rcu_read_lock_sched_held() handle !PREEMPT
  rcu: Add control variables to lockdep_rcu_dereference() diagnostics
  rcu, cgroup: Relax the check in task_subsys_state() as early boot is now handled by lockdep-RCU
  rcu: Use wrapper function instead of exporting tasklist_lock
  sched, rcu: Fix rcu_dereference() for RCU-lockdep
  rcu: Make task_subsys_state() RCU-lockdep checks handle boot-time use
  rcu: Fix holdoff for accelerated GPs for last non-dynticked CPU
  x86/gart: Unexport gart_iommu_aperture

Fix trivial conflicts in kernel/trace/ftrace.c

Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Do not record user stack trace from NMI context
  tracing: Disable buffer switching when starting or stopping trace
  tracing: Use same local variable when resetting the ring buffer
  function-graph: Init curr_ret_stack with ret_stack
  ring-buffer: Move disabled check into preempt disable section
  function-graph: Add tracing_thresh support to function_graph tracer
  tracing: Update the comm field in the right variable in update_max_tr
  function-graph: Use comment notation for func names of dangling '}'
  function-graph: Fix unused reference to ftrace_set_func()
  tracing: Fix warning in s_next of trace file ops
  tracing: Include irqflags headers from trace clock

Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Sound MSI fallout on a Asus mobo NVIDIA MCP55
  sound: fix opti92x-ad1848 build
  ALSA: hda - Fix input source elements of secondary ADCs on Realtek
  ALSA: hda - Fix wrong model range check for ALC268

Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Provide generic perf_sample_data initialization
  MAINTAINERS: Add Arnaldo as tools/perf/ co-maintainer
  perf trace: Don't use pager if scripting
  perf trace/scripting: Remove extraneous header read
  perf, ARM: Modify kuser rmb() call to compile for Thumb-2
  x86/stacktrace: Don't dereference bad frame pointers
  perf archive: Don't try to collect files without a build-id
  perf_events, x86: Fixup fixed counter constraints
  perf, x86: Restrict the ANY flag
  perf, x86: rename macro in ARCH_PERFMON_EVENTSEL_ENABLE
  perf, x86: add some IBS macros to perf_event.h
  perf, x86: make IBS macros available in perf_event.h
  hw-breakpoints: Remove stub unthrottle callback
  x86/hw-breakpoints: Remove the name field
  perf: Remove pointless breakpoint union
  perf lock: Drop the buffers multiplexing dependency
  perf lock: Fix and add misc documentally things
  percpu: Add __percpu sparse annotations to hw_breakpoint

Merge git://git./linux/kernel/git/steve/gfs2-2.6-fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: Skip check for mandatory locks when unlocking
  GFS2: Allow the number of committed revokes to temporarily be negative
  GFS2: do not select QUOTA

Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/nes: Fix CX4 link problem in back-to-back configuration
  RDMA/nes: Clear stall bit before destroying NIC QP
  RDMA/nes: Set assume_aligned_header bit
  RDMA/cxgb3: Wait at least one schedule cycle during device removal
  IB/mad: Ignore iWARP devices on device removal
  IPoIB: Include return code in trace message for ib_post_send() failures
  IPoIB: Fix TX queue lockup with mixed UD/CM traffic

bridge: ensure to unlock in error path in br_multicast_query().

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/tulip/eeprom.c: fix bogus "(null)" in tulip init messages

On Wed, 2010-03-10 at 08:41 -0800, David Miller wrote:
> From: Mikael Pettersson <mikpe@it.uu.se>
> Date: Wed, 10 Mar 2010 16:33:28 +0100
> > Booting 2.6.34-rc1 on a machine with a tulip nic I see
> > a number of kernel messages that include "(null)" where
> > previous kernels included the string "tulip0":
> CC:'ing the guilty party :-)  It's one of the following
> commits:

Thanks Mikael.

Anonymity has some good attributes.
Blame avoidance is one of them.

I've broad shoulders.  It's me, then Dwight Howard...

There might be another few of these where ->name or ->dev
was used before struct device or net_device was registered.
I'll go back and check.

tulip_core has:

if (tp->flags & HAS_MEDIA_TABLE) {
sprintf(dev->name, DRV_NAME "%d", board_idx); /* hack */
tulip_parse_eeprom(dev);
strcpy(dev->name, "eth%d"); /* un-hack */
}

So I don't feel _too_ bad.

tulip_parse_eeprom is done before register_netdev so the logging
there can not use netdev_<level> or dev_<level>(&dev->dev

Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

sky2: Avoid rtnl_unlock without rtnl_lock

Make sure we always call rtnl_lock before going down the
error path in sky2_resume, which unlocks the rtnl lock.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: Send netlink notification when DAD fails

If we are managing IPv6 addresses using DHCP, it would be nice
for user-space to be notified if an address configured through
DHCP fails DAD.  Otherwise user-space would have to poll to see
whether DAD succeeds.

This patch uses the existing notification mechanism and simply
hooks it into the DAD failure code path.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/tg3.c: change the field used with the TG3_FLAG_10_100_ONLY constant

The constant TG3_FLAG_10_100_ONLY should be used with the tg3_flags field,
not the tg3_flags2 field, as done elsewhere in the same file.

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

i2c-algo-bit: Add pre- and post-xfer hooks

Drivers might have to do random things before and/or after I2C
transfers. Add hooks to the i2c-algo-bit implementation to let them do
so.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Alex Deucher <alexdeucher@gmail.com>

at24: Init dynamic bin_attribute structures

Commit 6992f5334995af474c2b58d010d08bc597f0f2fe introduced this requirement.

Reported-by: Albrecht Dress <albrecht.dress@arcor.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

i2c: Drop configure option I2C_DEBUG_CHIP

Now that directory drivers/i2c/chips is gone, configuration option
I2C_DEBUG_CHIP no longer has any effect, so we can drop it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>

tsl2550: Move from i2c/chips to misc

Move the last remaining driver from i2c/chips to misc. Good ridance!

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>

i2c-i801: Don't use the block buffer for I2C block writes

Experience has shown that the block buffer can only be used for SMBus
(not I2C) block transactions, even though the datasheet doesn't
mention this limitation.

Reported-by: Felix Rubinstein <felixru@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Oleg Ryjkov <oryjkov@gmail.com>
Cc: stable@kernel.org

i2c-powermac: Be less verbose in the absence of real errors.

Be less verbose in the absence of real errors. We don't have to report
failed probes to the users, it's only confusing them.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Andrey Gusev <ronne@list.ru>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: stable@kernel.org

i2c-smbus: Use device_lock/device_unlock

Use the new device locking/unlocking API.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

9p: Skip check for mandatory locks when unlocking

While investigating a bug, I came across a possible bug in v9fs. The
problem is similar to the one reported for NFS by ASANO Masahiro in
http://lkml.org/lkml/2005/12/21/334.

v9fs_file_lock() will skip locks on file which has mode set to 02666.
This is a problem in cases where the mode of the file is changed after
a process has obtained a lock on the file. Such a lock will be skipped
during unlock and the machine will end up with a BUG in
locks_remove_flock().

v9fs_file_lock() should skip the check for mandatory locks when
unlocking a file.

Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Fixes a simple bug enabling writes beyond 2GB.

Fixes a simple bug so that large files beyond 2GB can be created.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9p: Change the name of new protocol from 9p2010.L to 9p2000.L

This patch changes the name of the new 9P protocol from 9p2010.L to
9p2000.u. This is because we learnt that the name 9p2010 is already
being used by others.

Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

fs/9p: re-init the wstat in readdir loop

This ensure that on failure when we free the stat buf we don't end up
freeing an already freed pointer in the earlier loop

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

net/9p: Add sysfs mount_tag file for virtio 9P device

This adds a new file for virtio 9P device. The file
contain details of the mount device name that should
be used to mount the 9P file system.

Ex: /sys/devices/virtio-pci/virtio1/mount_tag  file now
contian the tag name to be used to mount the 9P file system.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

net/9p: Use the tag name in the config space for identifying mount point

This patch use the tag name in the config space to identify the
mount device. The the virtio device name depend on the enumeration
order of the device and may not remain the same across multiple boots
So we use the tag name which is set via qemu option to uniquely identify
the mount device

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

x86, k8 nb: Fix boot crash: enable k8_northbridges unconditionally on AMD systems

de957628ce7c84764ff41331111036b3ae5bad0f changed setting of the
x86_init.iommu.iommu_init function ptr only when GART IOMMU is
found.

One side effect of it is that num_k8_northbridges
is not initialized anymore if not explicitly
called. This resulted in uninitialized pointers in
<arch/x86/kernel/cpu/intel_cacheinfo.c:amd_calc_l3_indices()>,
for example, which uses the num_k8_northbridges thing through
node_to_k8_nb_misc().

Fix that through an initcall that runs right after the PCI
subsystem and does all the scanning. Then, remove initialization
in gart_iommu_init() which is a rootfs_initcall and we're
running before that.

What is more, since num_k8_northbridges is being used in other
places beside GART IOMMU, include it whenever we add AMD CPU
support. The previous dependency chain in kconfig contained

K8_NB depends on AGP_AMD64|GART_IOMMU

which was clearly incorrect. The more natural way in terms of
hardware dependency should be

AGP_AMD64|GART_IOMMU depends on K8_NB depends on CPU_SUP_AMD &&
PCI. Make it so Number One!

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Joerg Roedel <joerg.roedel@amd.com>
LKML-Reference: <20100312144303.GA29262@aftab>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Tested-by: Joerg Roedel <joerg.roedel@amd.com>

tracing: Do not record user stack trace from NMI context

A bug was found with Li Zefan's ftrace_stress_test that caused applications
to segfault during the test.

Placing a tracing_off() in the segfault code, and examining several
traces, I found that the following was always the case. The lock tracer
was enabled (lockdep being required) and userstack was enabled. Testing
this out, I just enabled the two, but that was not good enough. I needed
to run something else that could trigger it. Running a load like hackbench
did not work, but executing a new program would. The following would
trigger the segfault within seconds:

  # echo 1 > /debug/tracing/options/userstacktrace
  # echo 1 > /debug/tracing/events/lock/enable
  # while :; do ls > /dev/null ; done

Enabling the function graph tracer and looking at what was happening
I finally noticed that all cashes happened just after an NMI.

 1)               |    copy_user_handle_tail() {
 1)               |      bad_area_nosemaphore() {
 1)               |        __bad_area_nosemaphore() {
 1)               |          no_context() {
 1)               |            fixup_exception() {
 1)   0.319 us    |              search_exception_tables();
 1)   0.873 us    |            }
[...]
 1)   0.314 us    |  __rcu_read_unlock();
 1)   0.325 us    |    native_apic_mem_write();
 1)   0.943 us    |  }
 1)   0.304 us    |  rcu_nmi_exit();
[...]
 1)   0.479 us    |  find_vma();
 1)               |  bad_area() {
 1)               |    __bad_area() {

After capturing several traces of failures, all of them happened
after an NMI. Curious about this, I added a trace_printk() to the NMI
handler to read the regs->ip to see where the NMI happened. In which I
found out it was here:

ffffffff8135b660 <page_fault>:
ffffffff8135b660:       48 83 ec 78             sub    $0x78,%rsp
ffffffff8135b664:       e8 97 01 00 00          callq  ffffffff8135b800 <error_entry>

What was happening is that the NMI would happen at the place that a page
fault occurred. It would call rcu_read_lock() which was traced by
the lock events, and the user_stack_trace would run. This would trigger
a page fault inside the NMI. I do not see where the CR2 register is
saved or restored in NMI handling. This means that it would corrupt
the page fault handling that the NMI interrupted.

The reason the while loop of ls helped trigger the bug, was that
each execution of ls would cause lots of pages to be faulted in, and
increase the chances of the race happening.

The simple solution is to not allow user stack traces in NMI context.
After this patch, I ran the above "ls" test for a couple of hours
without any issues. Without this patch, the bug would trigger in less
than a minute.

Cc: stable@kernel.org
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

tracing: Disable buffer switching when starting or stopping trace

When the trace iterator is read, tracing_start() and tracing_stop()
is called to stop tracing while the iterator is processing the trace
output.

These functions disable both the standard buffer and the max latency
buffer. But if the wakeup tracer is running, it can switch these
buffers between the two disables:

  buffer = global_trace.buffer;
  if (buffer)
      ring_buffer_record_disable(buffer);

      <<<--------- swap happens here

  buffer = max_tr.buffer;
  if (buffer)
      ring_buffer_record_disable(buffer);

What happens is that we disabled the same buffer twice. On tracing_start()
we can enable the same buffer twice. All ring_buffer_record_disable()
must be matched with a ring_buffer_record_enable() or the buffer
can be disable permanently, or enable prematurely, and cause a bug
where a reset happens while a trace is commiting.

This patch protects these two by taking the ftrace_max_lock to prevent
a switch from occurring.

Found with Li Zefan's ftrace_stress_test.

Cc: stable@kernel.org
Reported-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

tracing: Use same local variable when resetting the ring buffer

In the ftrace code that resets the ring buffer it references the
buffer with a local variable, but then uses the tr->buffer as the
parameter to reset. If the wakeup tracer is running, which can
switch the tr->buffer with the max saved buffer, this can break
the requirement of disabling the buffer before the reset.

   buffer = tr->buffer;
   ring_buffer_record_disable(buffer);
   synchronize_sched();
   __tracing_reset(tr->buffer, cpu);

If the tr->buffer is swapped, then the reset is not happening to the
buffer that was disabled. This will cause the ring buffer to fail.

Found with Li Zefan's ftrace_stress_test.

Cc: stable@kernel.org
Reported-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

function-graph: Init curr_ret_stack with ret_stack

If the graph tracer is active, and a task is forked but the allocating of
the processes graph stack fails, it can cause crash later on.

This is due to the temporary stack being NULL, but the curr_ret_stack
variable is copied from the parent. If it is not -1, then in
ftrace_graph_probe_sched_switch() the following:

for (index = next->curr_ret_stack; index >= 0; index--)
next->ret_stack[index].calltime += timestamp;

Will cause a kernel OOPS.

Found with Li Zefan's ftrace_stress_test.

Cc: stable@kernel.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

ring-buffer: Move disabled check into preempt disable section

The ring buffer resizing and resetting relies on a schedule RCU
action. The buffers are disabled, a synchronize_sched() is called
and then the resize or reset takes place.

But this only works if the disabling of the buffers are within the
preempt disabled section, otherwise a window exists that the buffers
can be written to while a reset or resize takes place.

Cc: stable@kernel.org
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4B949E43.2010906@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Merge branch 'for-linus' of git://git./linux/kernel/git/sameo/mfd-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Several MFD drivers should depend on GENERIC_HARDIRQS
  mfd: Fix sm501 requested region size

Merge git://git./linux/kernel/git/hirofumi/fatfs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6:
  fat: Fix stat->f_namelen
  fat: Fix vfat_lookup()

Fix up .gitignore for top-level file patterns

Some of the gitignore file patters were explicitly meant to be only for
the top level, but weren't marked that way, so they would trigger
recursively in subdirectories too.  Normally that was harmless, but at
least "linux" happened to trigger elsewhere too. Fix it up.

And other patterns in that section weren't necessarily top-level at all.

Reported-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timekeeping: Prevent oops when GENERIC_TIME=n

anon_inodes: mark the anon inode private

Inotify was switched to use anon_inode instead of its own private filesystem
which only had one inode in commit c44dcc56d2b5c7 "switch inotify_user to
anon_inode"

The problem with this is that now the inotify inode is not a distinct inode
which can be managed by LSMs.  userspace tools which use inotify were allowed
to use the inotify inode but may not have had permission to do read/write type
operations on the anon_inode.  After looking at the anon_inode and its users
it looks like the best solution is to just mark the anon_inode as S_PRIVATE
so the security system will ignore it.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-udf-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: use ext2_find_next_bit
  udf: Do not read inode before writing it
  udf: Fix unalloc space handling in udf_update_inode

Merge branch 'msm-mmc_sdcc' of git://codeaurora.org/quic/kernel/dwalker/linux-msm

* 'msm-mmc_sdcc' of git://codeaurora.org/quic/kernel/dwalker/linux-msm:
  msm_sdcc.c: missing brackets in msmsdcc_resume()

locking: Make sparse work with inline spinlocks and rwlocks

Currently sparse does not work with inline spinlock and rwlock functions.
The problem is that they do not use the __acquires/__releases out-of-line
functions, but use inline functions with no sparse annotations.

This patch adds the appropriate annotations to make it work properly.

Signed-off-by: Luca Barbieri <luca@luca-barbieri.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/booke: Fix breakpoint/watchpoint one-shot behavior
  powerpc: Reduce printk from pseries_mach_cpu_die()
  powerpc: Move checks in pseries_mach_cpu_die()
  powerpc: Reset kernel stack on cpu online from cede state
  powerpc: Fix G5 thermal shutdown
  powerpc/pseries: Pass CPPR value to H_XIRR hcall
  powerpc/booke: Fix a couple typos in the advanced ptrace code
  powerpc: Fix SMP build with disabled CPU hotplugging.
  powerpc: Dynamically allocate pacas
  powerpc/perf: e500 support
  powerpc/perf: Build callchain code regardless of hardware event support.
  powerpc/cpm2: Checkpatch cleanup
  powerpc/86xx: Renaming following split of GE Fanuc joint venture
  powerpc/86xx: Convert gef_pic_lock to raw_spinlock
  powerpc/qe: Convert qe_ic_lock to raw_spinlock
  powerpc/82xx: Convert pci_pic_lock to raw_spinlock
  powerpc/85xx: Convert socrates_fpga_pic_lock to raw_spinlock

Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/trivial

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (56 commits)
  doc: fix typo in comment explaining rb_tree usage
  Remove fs/ntfs/ChangeLog
  doc: fix console doc typo
  doc: cpuset: Update the cpuset flag file
  Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed
  Remove drivers/parport/ChangeLog
  Remove drivers/char/ChangeLog
  doc: typo - Table 1-2 should refer to "status", not "statm"
  tree-wide: fix typos "ass?o[sc]iac?te" -> "associate" in comments
  No need to patch AMD-provided drivers/gpu/drm/radeon/atombios.h
  devres/irq: Fix devm_irq_match comment
  Remove reference to kthread_create_on_cpu
  tree-wide: Assorted spelling fixes
  tree-wide: fix 'lenght' typo in comments and code
  drm/kms: fix spelling in error message
  doc: capitalization and other minor fixes in pnp doc
  devres: typo fix s/dev/devm/
  Remove redundant trailing semicolons from macros
  fix typo "definetly" -> "definitely" in comment
  tree-wide: s/widht/width/g typo in comments
  ...

Fix trivial conflict in Documentation/laptops/00-INDEX

Merge branch 'for-linus' of /home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits)
  ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock
  ARM: S3C2443: Remove #if 0 for clk_mpll
  ARM: S3C2443: Update notes on MPLLREF clock
  ARM: S3C2443: Further clksrc-clk conversions
  ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation
  USB: Fix s3c-hsotg build following Samsung platform header moves
  ARM: S3C64XX: Reintroduce unconditional build of audio device
  ARM: 5961/1: ux500: fix CLKRST addresses
  ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted
  ASoC: Fix S3C64xx IIS driver for Samsung header reorg
  ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support
  [ARM] pxa: fix typo in mxm8x10.h
  [ARM] pxa/raumfeld: set GPIO drive bits for LED pins
  [ARM] pxa/zeus: Add support for mcp2515 CAN bus
  [ARM] pxa/zeus: Add support for onboard max6369 watchdog
  [ARM] pxa/zeus: Add Eurotech as the manufacturer
  [ARM] pxa/zeus: Correct the USB host initialisation flags
  [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress
  [ARM] pxa: refactor uncompress.h for non-PXA uarts
  [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs
  ...

sysctl extern cleanup: poll

Extern declarations in sysctl.c should be moved to their own header file,
and then include them in relavant .c files.

Move epoll_table extern declaration to linux/poll.h

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl extern cleanup: lockdep

Extern declarations in sysctl.c should be moved to their own header file,
and then include them in relavant .c files.

Move lockdep extern declarations to linux/lockdep.h

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl extern cleanup: rtmutex

Extern declarations in sysctl.c should be moved to their own header file,
and then include them in relavant .c files.

Move max_lock_depth extern declaration to linux/rtmutex.h

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl extern cleanup: acct

Extern declarations in sysctl.c should be moved to their own header file,
and then include them in relavant .c files.

Move acct_parm extern declaration to linux/acct.h

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl extern cleanup: sg

Extern declarations in sysctl.c should be moved to their own header file,
and then include them in relavant .c files.

Move sg_big_buff extern declaration to scsi/sg.h

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Acked-by: Doug Gilbert <dgilbert@interlog.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl extern cleanup: module

Extern declarations in sysctl.c should be moved to their own header file,
and then include them in relavant .c files.

Move modprobe_path extern declaration to linux/kmod.h
Move modules_disabled extern declaration to linux/module.h

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl extern cleanup: rcu

Extern declarations in sysctl.c should be moved to their own header file,
and then include them in relavant .c files.

Move rcutorture_runnable extern declaration to linux/rcupdate.h

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Acked-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl extern cleanup: signal

Extern declarations in sysctl.c should be moved to their own header file,
and then include them in relavant .c files.

Move print_fatal_signals extern declaration to linux/signal.h

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sysctl extern cleanup: C_A_D

Extern declarations in sysctl.c should be moved to their own header file,
and then include them in relavant .c files.

Move C_A_D extern variable declaration to linux/reboot.h

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mxcmmc: fixed max_seg_size value on initialization

This unpleasant typo appeared while porting the driver from Freescale
original sources, where anyone can easily find the correct version.

Current incorrect version potentially can influence segment and merge
handling in block subsystem via MMC request queue settings.

Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

inflate_fast: sout is already a short so ptr arith was off by one.

inflate_fast() can do either POST INC or PRE INC on its pointers walking
the memory to decompress.  Default is PRE INC.

The sout pointer offset was miscalculated in one case as the calculation
assumed sout was a char * This breaks inflate_fast() iff configured to do
POST INC.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zlib: make new optimized inflate endian independent

Commit 6846ee5ca68d81e6baccf0d56221d7a00c1be18b ("zlib: Fix build of
powerpc boot wrapper") made the new optimized inflate only available on
arch's that define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS.

This patch will again enable the optimization for all arch's by defining
our own endian independent version of unaligned access.  As an added
bonus, arch's that define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS do a
plain load instead.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

decompress: fix new decompressor for PIC

The ARM kernel decompressor wants to be able to relocate r/w data
independently from the rest of the image, and we do this by ensuring that
r/w data has global visibility.  Define STATIC_RW_DATA to be empty to
achieve this.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Alain Knaff <alain@knaff.lu>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sgi-gru: use for_each_set_bit()

Replace open-coded loop with for_each_set_bit().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/char/mmtimer.c: eliminate useless code

The variable x is initialized twice to the same (side effect-free)
expression.  Drop one initialization.

A simplified version of the semantic match that finds this problem is:
(http://coccinelle.lip6.fr/)

// <smpl>
@forall@
idexpression *x;
identifier f!=ERR_PTR;
@@

x = f(...)
... when != x
(
x = f(...,<+...x...+>,...)
|
* x = f(...)
)
// </smpl>

Stefan observed:

  The next x = rb_entry(mn->next, struct mmtimer, list); is preceded by a
  test whether mn->next is NULL.

  Unless that test is redundant too, your patch fixes a potential NULL
  pointer dereference, introduced by commit cbacdd95 "SGI Altix mmtimer:
  allow larger number of timers per node" in 2.6.26.

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

w1: mxc_w1: move probe() and remove() to the dev* text area

This fixes the section mismatch warning for mxc_w1_probe()

Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

w1: fix test in ds2482_wait_1wire_idle()

With `while (++retries < DS2482_WAIT_IDLE_TIMEOUT)' retries reaches
DS2482_WAIT_IDLE_TIMEOUT after the loop

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

serial amba-pl010: enable PPS support

Function pl010_enable_ms() is automagically called when PPS ldisc
is selected.

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

serial 8250: enable PPS support

Automagically function serial8250_enable_ms() is called when PPS ldisc
is selected.

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pps: serial clients support

Adds support, by using the PPS line discipline, for the PPS sources
connected with the CD (Carrier Detect) pin of a serial port.

[akpm@linux-foundation.org: fix cast size warnings]
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ldisc n_tty: add new method n_tty_inherit_ops()

This new method can be used to init a new struct tty_ldisc_ops as the
default tty_ldisc_N_TTY struct.

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ldisc: new dcd_change() method for line disciplines

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pps: LinuxPPS clients support

Each PPS source can be registered/deregistered into the system by using
special modules called "clients".  They simply define the PPS sources'
attributes and implement the time signal registration mechanism.

This patch adds a special directory for such clients and adds a dummy
client that can be useful to test system integrity on real systems.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation: rename PCI-DMA-mapping.txt to DMA-API-HOWTO.txt

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation: remove the PCI DMA API description in DMA-API.txt

- remove the PCI DMA API description in DMA-API.txt
- remove the descriptions of dma_unmap macros since
  PCI-DMA-mapping.txt has the same description.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "David S. Miller" <davem@davemloft.net>
Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation: convert PCI-DMA-mapping.txt to use the generic DMA API

- replace the PCI DMA API (i.e. pci_dma_*) with the generic DMA API.

- make the document more generic (use the PCI specific explanation as
  an example).

[akpm@linux-foundation.org: fix things Randy noticed]
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "David S. Miller" <davem@davemloft.net>
Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dma-mapping: pci: move pci_set_dma_mask and pci_set_consistent_dma_mask to pci-dma-compat.h

We can use pci-dma-compat.h to implement pci_set_dma_mask and
pci_set_consistent_dma_mask as we do with the other PCI DMA API.

We can remove HAVE_ARCH_PCI_SET_DMA_MASK too.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dma-mapping: arm: use generic pci_set_dma_mask and pci_set_consistent_dma_mask

This converts arm to the generic pci_set_dma_mask and
pci_set_consistent_dma_mask (removes HAVE_ARCH_PCI_SET_DMA_MASK for
dmabounce).

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Looked-over-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dma-mapping: powerpc: use generic pci_set_dma_mask and pci_set_consistent_dma_mask

This converts powerpc to use the generic pci_set_dma_mask and
pci_set_consistent_dma_mask (drivers/pci/pci.c).

The generic pci_set_dma_mask does what powerpc's pci_set_dma_mask does.

Unlike powerpc's pci_set_consistent_dma_mask, the gneric
pci_set_consistent_dma_mask sets only coherent_dma_mask.  It doesn't work
for powerpc?  pci_set_consistent_dma_mask API should set only
coherent_dma_mask?

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dma-mapping: dma-mapping.h: add dma_set_coherent_mask

dma_set_coherent_mask corresponds to pci_set_consistent_dma_mask.  This is
necessary to move to the generic device model DMA API from the PCI bus
specific API in the long term.

dma_set_coherent_mask works in the exact same way that
pci_set_consistent_dma_mask does.  So this patch also changes
pci_set_consistent_dma_mask to call dma_set_coherent_mask.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@suse.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dma-mapping: pci: convert pci_set_dma_mask to call dma_set_mask

This changes pci_set_dma_mask to call the generic DMA API, dma_set_mask.

pci_set_dma_mask (in drivers/pci/pci.c) does the same things that
dma_set_mask does on all the architectures that use pci_set_dma_mask;
calls dma_supprted and sets dev->dma_mask.  So we safely change
pci_set_dma_mask to simply call dma_set_mask.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@suse.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dma-mapping: alpha: use include/linux/pci-dma-compat.h

This converts Alpha to use include/linux/pci-dma-compat.h.  Alpha is the
only architecutre that implements the PCI DMA API in the own way.  That
makes it difficult to implement the generic DMA API via the PCI bus
specific DMA API.

The generic DMA API calls the PCI DMA API implementation in
arch/alpha/kernel/pci_iommu.c on non Jensen systems.  It calls the DMA API
in arch/alpha/kernel/pci-noop.c on Jensen systems.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dma-mapping: sparc: unify 32bit and 64bit dma_set_mask

This patchset transforms the PCI DMA API into the generic device model.
It's one of the reasons why we introduced the generic DMA API long ago;
driver writers are always able to use the generic DMA API with any bus
instead of using bus specific DMA APIs such as pci_map_single,
sbus_map_single, etc (only two bus specific APIs exist now; pci and ssb).

Some of the PCI DMA API are already implented on the top of the generic
DMA API (include/asm-generic/pci-dma-compat.h).  But there are some
exceptions.  This patchset finishes the transformation.

This patch:

sparc has two dma_set_mask implementations for 32bit and 64bit.  They are
same except for the error returned value.  We can safely unify them since
the error returned value doesn't matter as long as it is negative (as
DMA-API.txt describes).

This patch also changes dma_set_mask not to call
pci_set_dma_mask. Instead, dma_set_mask does the same thing that
pci_set_dma_mask does. This change enables ut to change
pci_set_dma_mask to call dma_set_mask; we can implement
pci_set_dma_mask as pci-dma-compat.h does.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: David Miller <davem@davemloft.net>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: James Bottomley <James.Bottomley@suse.de>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dma-mapping: mn10300: remove the obsolete and unnecessary DMA API comments

pci_dma_sync_single was obsoleted long ago.

All the comments are generic, not architecture specific, simply describes
some of the DMA-API (and the same comments are in other files).
Documentation/DMA-API.txt have more detailed descriptions.

This removes the above obsolete and unnecessary DMA API
comments. Let's describe the DMA API in only
Documentation/DMA-API.txt.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dma-mapping: blackfin: remove the obsolete and unnecessary DMA API comments

pci_dma_sync_single was obsoleted long ago.

All the comments are generic, not architecture specific, simply describes
some of the DMA-API (and the same comments are in other files).
Documentation/DMA-API.txt have more detailed descriptions.

This removes the above obsolete and unnecessary DMA API comments.  Let's
describe the DMA API in only Documentation/DMA-API.txt.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dma-mapping: frv: remove the obsolete and unnecessary DMA API comments

pci_dma_sync_single was obsoleted long ago.

All the comments are generic, not architecture specific, simply describes
some of the DMA-API (and frv has the same comments in three files).
Documentation/DMA-API.txt have more detailed descriptions.

This removes the above obsolete and unnecessary DMA API comments.  Let's
describe the DMA API in only Documentation/DMA-API.txt.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: David Howells <dhowells@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dma-mapping.h: add the dma_unmap state API

Adds the following macros:

DECLARE_DMA_UNMAP_ADDR(ADDR_NAME)
DECLARE_DMA_UNMAP_LEN(LEN_NAME)
dma_unmap_addr(PTR, ADDR_NAME)
dma_unmap_addr_set(PTR, ADDR_NAME, VAL)
dma_unmap_len(PTR, LEN_NAME)
dma_unmap_len_set(PTR, LEN_NAME, VAL)

The API corresponds to the pci_unmap state API.  We'll move to this new
generic API from the PCI specific API in the long term.  As
include/asm-generic/pci-dma-compat.h does, the pci_unmap API simply calls
the new generic API for some time.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@suse.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pci-dma: add linux/pci-dma.h to linux/pci.h

All the architectures properly set NEED_DMA_MAP_STATE now so we can safely
add linux/pci-dma.h to linux/pci.h and remove the linux/pci-dma.h
inclusion in arch's asm/pci.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pci-dma: cris: use include/linux/pci-dma.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Mikael Starvik <starvik@axis.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pci-dma: xtensa: use include/linux/pci-dma.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pci-dma: sparc: use include/linux/pci-dma.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pci-dma: sh: use include/linux/pci-dma.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pci-dma: powerpc: use include/linux/pci-dma.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pci-dma: parisc: use include/linux/pci-dma.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <James.Bottomley@suse.de>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pci-dma: mips: use include/linux/pci-dma.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pci-dma: ia64: use include/linux/pci-dma.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pci-dma: frv: use include/linux/pci-dma.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pci-dma: arm: use include/linux/pci-dma.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pci-dma: alpha: use include/linux/pci-dma.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Acked-by: Matt Turner <mattst88@gmail.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pci-dma: x86: use include/linux/pci-dma.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pci-dma: add include/linux/pci-dma.h

This patch adds include/linux/pci-dma.h that defines the pci_unmap state
API:

DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
DECLARE_PCI_UNMAP_LEN(LEN_NAME)
pci_unmap_addr(PTR, ADDR_NAME)
pci_unmap_addr_set(PTR, ADDR_NAME, VAL)
pci_unmap_len(PTR, LEN_NAME)
pci_unmap_len_set(PTR, LEN_NAME, VAL)

This enables us to remove lots of the duplication in architecture
implementations since there are only two ways to define the API.

If architectures define CONFIG_NEED_DMA_MAP_STATE, they get the real
definition of pci_unmap state API.  If not, they get the noop definition.

In the long term, it's better to replace the API with the generic device
model API such as DECLARE_DMA_UNMAP_ADDR.  We can map the API to the
generic one (like dma-mapping-compat.h does).  This patch also makes the
migration process easier.  We can remove this file after the migration.

It might be simpler to add the API to include/linux/pci.h but looks it's
already too large.  We'll remove pci-dma.h after finishing moving to the
generic device model.  So I put the API to a separate file.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Helge Deller <deller@gmx.de>
Cc: James Bottomley <James.Bottomley@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>