drm/exynos: Remove tracking log functions

This patch removes tracking log functions which were used to debug
in the early development stage and are not so important as were.
So remove them for code clean up.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: hdmi: use drm_display_mode to check the supported modes

This patch renames check_timing to check_mode and removes the
unnecessary conversion of drm_display_mode to/from fb_videomode in
the hdmi driver.

v4:
1) Changed the commit message to add information related to renaming
the callbacks to check_mode.
2) Changed debug message to print 1/0 for interlace mode.

v3:
1) Replaced check_timing callbacks with check_mode.
2) Change the type of second parameter of check_mode callback from void
pointer paramenter to struct drm_display_mode pointer.

v2:
1) Removed convert_to_video_timing().
2) Corrected DRM_DEBUG_KMS to print the resolution properly.

Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fimd: Add support for S3C64xx SoCs

The FIMD block present on S3C6400/S3C6410 SoCs is compatible with this
driver, so it can be supported by it as well.

This patch adds appropriate device IDs and driver data to enable this
driver for S3C64xx SoCs.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fimd: Add support for FIMD variants with clock selection

Some platforms that can be supported this driver has additional clock
source selection bits in VIDCON0 register that allows to select which
clock should be used to drive the pixel clock: bus clock or special
clock.

Since this driver assumes that special clock always drives the pixel
clock, this patch sets the selection bitfield to use the special clock.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fimd: Add support for FIMD versions without SHADOWCON register

Some platforms that can be supported with this driver have PRTCON
register instead of SHADOWCON, which requires slightly different
handling.

This patch factors out all register shadow control code from the driver
and adds a function to control register shadowing appropriately,
depending on driver data.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fimd: Hold pointer to driver data in context struct

This patch adds pointer to driver data to fimd_context structure, to
remove the need to call drm_fimd_get_driver_data() each time access to
driver data is necessary.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: do not use mode_set_base function directly

This patch adds exynos_drm_crtc_mode_set_commit function
to update mode data and it makes page flip call this function
instead of calling exynos_drm_crtc_mode_set_base function directly.

exynos_drm_crtc_mode_set_base function is called by drm subsystem
as a callback so we don't have to call this function directly.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

drm/exynos: Remove redundant use of of_match_ptr macro

'mixer_match_types' is always compiled in. Hence of_match_ptr is not
necessary.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: remove ignoring return value warning in hdmi

The definition of regulator_bulk_enable is fixed with __must_check
and this causes following build warning.
warning: ignoring return value of 'regulator_bulk_enable',
declared with attribute warn_unused_result
This patch fixes to check return value of the function.

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fix WINDOWS_NR checking to vidi driver

This patch just checks if win_data array range is valid
or not correctly.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

drm/exynos: fix tests for valid FIMD window number

Valid values for FIMD windows are from 0 to WINDOWS_NR-1
inclusive (5 windows in total). The WINDOWS_NR is also
a size of fimd_context.win_data array.
However, early-return tests for wrong values of windows
accepted a value of WINDOWS_NR which is out of bound
for fimd_context.win_data.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: fix checks for valid mixer window

Valid values for mixer window are from 0 to MIXER_WIN_NR-1 inclusive.
Arrays in structures (e.g. mixer_context.win_data) have size of
MIXER_WIN_NR so checks for wrong mixer window must be greater-equal.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Hyunhee Kim <hyunhee.kim@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Revert "drm: kms_helper: don't lose hotplug event"

This reverts commit 160954b7bca43da7cd3cfbce310e6df919a8216e.

This was rearming the workqueue with a 0 timeout, causing
a WARN_ON, and possible loop.

Daniel writes:
"I've looked a bit into this and I think we need to have a separate
work struct for recovering these lost hotplug events since the
continuous self-rearming case is a real risk (e.g. if a connector
flip-flops all the time). At least I don't see a sane way to block out
re-arming with the current code in a simple way. So reverting the
offender seems like the right thing and I'll go back to the drawing
board for 3.12."

Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/doc: Document the KMS property API

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/doc: Remove outdated note about i915 driver not behaving properly

The i915 driver has been fixed not to modify the mode argument of the
encoder mode_fixup operation. Remove the related comment from the
documentation.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm: Improve manual IRQ installation documentation

Define the rules for using irqs from drm drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/prime: add return check for dma_buf_fd

The dma_buf_fd() can return error when it fails to prepare fd,
so the dma_buf needs to be put.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/prime: reorder drm_prime_add_buf_handle and remove prototype

Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/prime: fix to put an exported dma_buf for adding handle failure

When drm_prime_add_buf_handle() returns failure for an exported
dma_buf, the dma_buf was already allocated and its refcount was
increased, so it needs to be put.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/prime: support to cache mapping

The drm prime also can support it like GEM CMA supports to cache
mapping. It doesn't allow multiple mappings for one attachment.

[airlied: rebased on top of other prime changes]
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/prime: replace NULL with error value in drm_prime_pages_to_sg

Instead of NULL, error value is casted with ERR_PTR() for
drm_prime_pages_to_sg() and IS_ERR_OR_NULL() macro is replaced
with IS_ERR() macro for drm_gem_map_dma_buf().

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/prime: fix to check return of dma_map_sg in prime helper

The dma_map_sg(), in map_dma_buf callback operation of prime helper,
can return 0 when it fails to map, so it needs to release related
resources.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/gem: fix not to assign error value to gem name

If idr_alloc() is failed, obj->name can be error value. Also
it cleans up duplicated flink processing code.

This regression has been introduced in

commit 2e928815c1886fe628ed54623aa98d0889cf5509
Author: Tejun Heo <tj@kernel.org>
Date:   Wed Feb 27 17:04:08 2013 -0800

    drm: convert to idr_alloc()

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/gem: add mutex lock when using drm_gem_mmap_obj

The drm_gem_mmap_obj() has to be protected with dev->struct_mutex,
but some caller functions do not. So it adds mutex lock to missing
callers and adds assertion to check whether drm_gem_mmap_obj() is
called with mutex lock or not.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/omap: drop the !FB_OMAP2 dep

This ends up causing circularity and really let people shoot themselves
in the foot.

Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/ttm: get rid of ttm_bo_is_reserved

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/vmwgfx: get rid of ttm_bo_is_reserved usage

Use lockdep_assert_held instead.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon: get rid of ttm_bo_is_reserved usage

Try to use lockdep_assert_held or other alternatives where possible.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/ttm: get rid of ttm_bo_is_reserved usage

Use lockdep_assert_held instead.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/ttm: inline ttm_bo_reserve and related calls

Makes lockdep a lot more useful.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon: inline reservations

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/mgag200: inline reservations

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/cirrus: inline reservations

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/ast: inline reservations

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/ttm: convert to the reservation api

Now that the code is compatible in semantics, flip the switch.
Use ww_mutex instead of the homegrown implementation.

ww_mutex uses -EDEADLK to signal that the caller has to back off,
and -EALREADY to indicate this buffer is already held by the caller.

ttm used -EAGAIN and -EDEADLK for those, respectively. So some changes
were needed to handle this correctly.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau: make flipping lockdep safe

cli->mutex was inverted with reservations, and multiple reservations were
used without a ticket, fix both. This commit had to be done after the previous
commit, because otherwise ttm_eu_* calls would use a different seqno counter..

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/ttm: make ttm reservation calls behave like reservation calls

This commit converts the source of the val_seq counter to
the ww_mutex api. The reservation objects are converted later,
because there is still a lockdep splat in nouveau that has to
resolved first.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

reservation: cross-device reservation support, v4

This adds support for a generic reservations framework that can be
hooked up to ttm and dma-buf and allows easy sharing of reservations
across devices.

The idea is that a dma-buf and ttm object both will get a pointer
to a struct reservation_object, which has to be reserved before
anything is done with the contents of the dma-buf.

Changes since v1:
 - Fix locking issue in ticket_reserve, which could cause mutex_unlock
   to be called too many times.
Changes since v2:
 - All fence related calls and members have been taken out for now,
   what's left is the bare minimum to be useful for ttm locking conversion.
Changes since v3:
 - Removed helper functions too. The documentation has an example
   implementation for locking. With the move to ww_mutex there is no
   need to have much logic any more.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/ast: do not attempt to acquire a reservation while in an interrupt handler

Mutexes should not be acquired in interrupt context. While the trylock
fastpath is arguably safe on all implementations, the slowpath
unlock path definitely isn't.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/mgag200: do not attempt to acquire a reservation while in an interrupt handler

Mutexes should not be acquired in interrupt context. While the trylock
fastpath is arguably safe on all implementations, the slowpath
unlock path definitely isn't.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/cirrus: do not attempt to acquire a reservation while in an interrupt handler

Mutexes should not be acquired in interrupt context. While the trylock
fastpath is arguably safe on all implementations, the slowpath
unlock path definitely isn't. This fixes the following lockdep splat:

[   13.044313] ------------[ cut here ]------------
[   13.044367] WARNING: at /c/kernel-tests/src/tip/kernel/mutex.c:858 mutex_trylock+0x87/0x220()
[   13.044378] DEBUG_LOCKS_WARN_ON(in_interrupt())
[   13.044378] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0-rc4-00296-ga2963dd #20
[   13.044379] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[   13.044390]  0000000000000009 ffff88000de039f8 ffffffff81fc86d5 ffff88000de03a38
[   13.044395]  ffffffff810d511b ffff880000000018 ffff88000f33c690 0000000000000001
[   13.044398]  00000000000003f0 ffff88000f4677c8 0000000000000000 ffff88000de03a98
[   13.044400] Call Trace:
[   13.044412]  <IRQ>  [<ffffffff81fc86d5>] dump_stack+0x19/0x1b
[   13.044441]  [<ffffffff810d511b>] warn_slowpath_common+0x6b/0x90
[   13.044445]  [<ffffffff810d51a6>] warn_slowpath_fmt+0x46/0x50
[   13.044448]  [<ffffffff81fd34d7>] mutex_trylock+0x87/0x220
[   13.044482]  [<ffffffff8186484d>] cirrus_dirty_update+0x1cd/0x330
[   13.044486]  [<ffffffff818649e8>] cirrus_imageblit+0x38/0x50
[   13.044506]  [<ffffffff8165782e>] soft_cursor+0x22e/0x240
[   13.044510]  [<ffffffff81656c31>] bit_cursor+0x581/0x5b0
[   13.044525]  [<ffffffff815de9f4>] ? vsnprintf+0x124/0x670
[   13.044529]  [<ffffffff81651333>] ? get_color.isra.16+0x43/0x130
[   13.044532]  [<ffffffff81653fca>] fbcon_cursor+0x18a/0x1d0
[   13.044535]  [<ffffffff816566b0>] ? update_attr.isra.2+0xa0/0xa0
[   13.044556]  [<ffffffff81754b82>] hide_cursor+0x32/0xa0
[   13.044565]  [<ffffffff81755bd3>] vt_console_print+0x103/0x3b0
[   13.044569]  [<ffffffff810d58ac>] ? print_time+0x9c/0xb0
[   13.044576]  [<ffffffff810d5960>] ? print_prefix+0xa0/0xc0
[   13.044580]  [<ffffffff810d63f6>] call_console_drivers.constprop.6+0x146/0x1f0
[   13.044593]  [<ffffffff815f9b38>] ? do_raw_spin_unlock+0xc8/0x100
[   13.044597]  [<ffffffff810d6f27>] console_unlock+0x2f7/0x460
[   13.044600]  [<ffffffff810d787a>] vprintk_emit+0x59a/0x5e0
[   13.044615]  [<ffffffff81fb676c>] printk+0x4d/0x4f
[   13.044650]  [<ffffffff82ba5511>] print_local_APIC+0x28/0x41c
[   13.044672]  [<ffffffff8114db55>] generic_smp_call_function_single_interrupt+0x145/0x2b0
[   13.044688]  [<ffffffff8106f9e7>] smp_call_function_single_interrupt+0x27/0x40
[   13.044697]  [<ffffffff81fd8f72>] call_function_single_interrupt+0x72/0x80
[   13.044707]  <EOI>  [<ffffffff81078166>] ? native_safe_halt+0x6/0x10
[   13.044717]  [<ffffffff811425cd>] ? trace_hardirqs_on+0xd/0x10
[   13.044738]  [<ffffffff8104f669>] default_idle+0x59/0x120
[   13.044742]  [<ffffffff810501e8>] arch_cpu_idle+0x18/0x40
[   13.044754]  [<ffffffff811320c5>] cpu_startup_entry+0x235/0x410
[   13.044763]  [<ffffffff81f9e781>] rest_init+0xd1/0xe0
[   13.044766]  [<ffffffff81f9e6b5>] ? rest_init+0x5/0xe0
[   13.044778]  [<ffffffff82b93ec2>] start_kernel+0x425/0x493
[   13.044781]  [<ffffffff82b93810>] ? repair_env_string+0x5e/0x5e
[   13.044786]  [<ffffffff82b93595>] x86_64_start_reservations+0x2a/0x2c
[   13.044789]  [<ffffffff82b93688>] x86_64_start_kernel+0xf1/0x100
[   13.044799] ---[ end trace 113ad28772af4058 ]---

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau: always select ACPI_VIDEO if ACPI is enabled.

Having nouveau builtin would still allow ACPI_VIDEO to be used as external module
if some of the deps for acpi_video have not been met, which would result in a linking
failure. Solve this by selecting all dependencies as well.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau: complain loudly if buffer is pinned during destruction

Shouldn't happen, and we invert the struct_mutex with reservation here,
potentially leading to deadlocks. Once reservations become lockdep annotated,
lockdep will go splat on this.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau: fixup fbcon failure paths

Add missing calls, and fix a leak from forgetting to call the unpin function.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau: unpin notify object in chan_fini

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/nouveau: implement prime helper unpin function

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon: implement unpin function, v2

Changes since v1:
- Fixup compiler warning in unpin function.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux into drm-next

This is the pull request for radeon for 3.11.  Highlights include:

- Support for CIK (Sea Islands) asics: 3D, compute, UVD
- DPM (Dynamic Power Management) support for 6xx-SI
- ASPM support for 6xx-SI
- Assorted bug fixes

* 'drm-next-3.11' of git://people.freedesktop.org/~agd5f/linux: (168 commits)
  drm/radeon/SI: fix TDP adjustment in set_power_state
  drm/radeon/NI: fix TDP adjustment in set_power_state
  drm/radeon: fix endian issues in atombios dpm code
  drm/radeon/dpm: fix UVD clock setting on SI
  drm/radeon/dpm: fix UVD clock setting on cayman
  drm/radeon/dpm: add support for setting UVD clock on rv6xx
  drm/radeon/dpm: add support for setting UVD clock on rs780
  drm/radeon: fix typo in ni_print_power_state
  drm/radeon: fix typo in cik_select_se_sh()
  drm/radeon/si: fix typo in function name
  drm/radeon/dpm: fix typo in setting uvd clock
  drm/radeon/dpm: add dpm_set_power_state failure output (si)
  add dpm_set_power_state failure output (7xx-ni)
  drm/radeon/dpm: add dpm_set_power_state failure output (7xx-ni)
  drm/radeon/dpm: add dpm_enable failure output (si)
  drm/radeon/dpm: add dpm_enable failure output (7xx-ni)
  drm/radeon/kms: add dpm support for SI (v7)
  drm/radeon: switch SI to use radeon_ucode.h
  drm/radeon: add SI to r600_is_internal_thermal_sensor()
  drm/radeon/dpm/rs780: properly catch errors in dpm setup
  ...

Merge tag 'drm-intel-next-2013-06-18' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Last 3.11 feature pull. I have a few odds bits and pieces and fixes in my
queue, I'll sort them out later on to see what's for 3.11-fixes and what's
for 3.12. But nothing to hold this here up imo.

Highlights:
- more hangcheck work from Mika and Chris to prepare for arb robustness
- trickle feed fixes from Ville
- first parts of the shared pch pll rework, with some basic hw state
  readout and cross-checking (this shuts up the confused pch pll refcount
  WARN that Linus just recently forwarded)
- Haswell audio power well support from Wang Xingchao (alsa bits acked by
  Takashi)
- some cleanups and asserts sprinkling around the plane/gamma enabling
  sequence from Ville
- more gtt refactoring from Ben
- clear up the adjusted->mode vs. pixel clock vs. port clock confusion
- 30bpp support, this time for real hopefully

* tag 'drm-intel-next-2013-06-18' of git://people.freedesktop.org/~danvet/drm-intel: (97 commits)
  drm/i915: remove a superflous semi-colon
  drm/i915: Kill useless "Enable panel fitter" comments
  drm/i915: Remove extra "ring" from error message
  drm/i915: simplify the reduced clock handling for pch plls
  drm/i915: stop killing pfit on i9xx
  drm/i915: explicitly set up PIPECONF (and gamma table) on haswell
  drm/i915: set up PIPECONF explicitly for i9xx/vlv platforms
  drm/i915: set up PIPECONF explicitly on ilk-ivb
  drm/i915: find guilty batch buffer on ring resets
  drm/i915: store ring hangcheck action
  drm/i915: add batch bo to i915_add_request()
  drm/i915: change i915_add_request to macro
  drm/i915: add i915_gem_context_get_hang_stats()
  drm/i915: add struct i915_ctx_hang_stats
  drm/i915: Try harder to disable trickle feed on VLV
  drm/i915: fix up pch pll enabling for pixel multipliers
  drm/i915: hw state readout and cross-checking for shared dplls
  drm/i915: WARN on lack of shared dpll
  drm/i915: split up intel_modeset_check_state
  drm/i915: extract readout_hw_state from setup_hw_state
  ...

Conflicts:
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_fb.c
drivers/gpu/drm/i915/intel_sdvo.c

drm/radeon/SI: fix TDP adjustment in set_power_state

Fixes hangs with DPM in some cases.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/NI: fix TDP adjustment in set_power_state

Fixes hangs with DPM in some cases.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix endian issues in atombios dpm code

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: fix UVD clock setting on SI

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: fix UVD clock setting on cayman

The rv770 version was using the wrong power state type.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add support for setting UVD clock on rv6xx

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add support for setting UVD clock on rs780

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix typo in ni_print_power_state

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix typo in cik_select_se_sh()

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/si: fix typo in function name

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: fix typo in setting uvd clock

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add dpm_set_power_state failure output (si)

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add dpm_set_power_state failure output (7xx-ni)

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add dpm_set_power_state failure output (7xx-ni)

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add dpm_enable failure output (si)

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add dpm_enable failure output (7xx-ni)

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/kms: add dpm support for SI (v7)

This adds dpm support for SI asics.  This includes:
- dynamic engine clock scaling
- dynamic memory clock scaling
- dynamic voltage scaling
- dynamic pcie gen1/gen2/gen3 switching
- power containment
- shader power scaling

Set radeon.dpm=1 to enable.

v2: enable hainan support, rebase
v3: guard acpi stuff
v4: fix 64 bit math
v5: fix 64 bit div harder
v6: fix thermal interrupt check noticed by Jerome
v7: attempt fix state enable

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge branch 'drm/for-next' of git://anongit.freedesktop.org/tegra/linux into drm-next

These changes are mostly minor fixes to things introduced in 3.10. The
biggest chunk is updates to the host1x firewall which checks job
submissions from userspace and wasn't working properly. All other
patches are mostly one-liners. Nothing new or too exciting this time
around.

* 'drm/for-next' of git://anongit.freedesktop.org/tegra/linux:
  gpu: host1x: Rework CPU syncpoint increment
  gpu: host1x: Fix client_managed type
  gpu: host1x: Fix memory access in syncpt request
  gpu: host1x: Copy gathers before verification
  gpu: host1x: Don't reset firewall between gathers
  gpu: host1x: Check reloc table before usage
  gpu: host1x: Check INCR opcode correctly
  drm/tegra: Remove DRIVER_BUS_PLATFORM from driver_features
  drm/tegra: Fix return value
  drm/tegra: Include header drm/drm.h
  MAINTAINERS: Update Tegra DRM entry
  drm/tegra: fix error return code in gr2d_submit()
  drm/tegra: fix missing unlock on error
  drm/tegra: Honor pixel-format changes
  drm/tegra: Explicitly set irq_enabled
  drm/tegra: Don't disable unused planes

drm/radeon: switch SI to use radeon_ucode.h

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: add SI to r600_is_internal_thermal_sensor()

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm/rs780: properly catch errors in dpm setup

We weren't properly catching errors in dpm_enable()
and dpm_set_power_state().

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm/r6xx: properly catch errors in dpm setup

We weren't properly catching errors in dpm_enable()
and dpm_set_power_state().

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm/r7xx: properly catch errors in dpm setup

We weren't properly catching errors in dpm_enable()
and dpm_set_power_state().

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm/trinity: properly catch errors in dpm setup

We weren't properly catching errors in dpm_enable()
and dpm_set_power_state().

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm/sumo: properly catch errors in dpm setup

We weren't properly catching errors in dpm_enable()
and dpm_set_power_state().

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm/evergreen: properly catch errors in dpm setup

We weren't properly catching errors in dpm_enable()
and dpm_set_power_state().

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm/btc: properly catch errors in dpm setup

We weren't properly catching errors in dpm_enable()
and dpm_set_power_state().

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm/ni: properly catch errors in dpm setup

We weren't properly catching errors in dpm_enable()
and dpm_set_power_state().

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/atom: fix voltage table parsing

The arrays items are variable sized.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix typo in atom voltage table handling (si+)

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix typo in atom voltage table handling (6xx-ni)

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add pcie gen helper function

Add a helper function to determine the preferred
pcie gen based on the card, system, and circumstance.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: update radeon_atombios_get_default_voltages for mvdd

Add a way to look up the bootup mvdd.  Required for DPM on SI.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: validate voltages against dispclk requirements

Validate the voltages against the voltage requirements of the
dispclk.  We currently don't adjust the disp clock so it never
changes, but we need to filter out voltage levels that are too
low none the less.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix some memory leaks in extended table parsing

Forgot to free some structs when allocation fails for some
tables.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm/cayman: use new fixed point functions (v2)

Use the new fixed point functions for leakage
calculations on cayman.

v2: fix up 64 bit math

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm: add some additional fixed point helpers (v3)

Required for certain driver calculations.  Code
was written by Christian König and ported to the
drm by me.

v2: fix 64 bit divides
v3: fix 64 bit for real (math64.h)

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: minor sid.h cleanup

Consolidate the non-register defines.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: save some display parameters for DPM

Required for SI.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: pull in ppm info from atom

Used by SI dpm.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: endian fixes for extended power tables

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: pull in phase shedding limits from atom

Required for dpm on SI.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/dpm: add an enum for pcie gen selection

This makes it easier the understand what the code is
doing.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: implement clock and power gating for SI

Only Cape Verde supports power gating.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: add clearstate init for verde power gating

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: initialize save/restore buffer for pg on verde

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: add indirect accessors for UVD CTX registers

These are needed for certain UVD power saving features.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: add atom get leakage vddc function

Required for DPM on SI.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: update rlc programming sequence on SI

This is required for certain power management features.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: enable additional power gating features on trinity

TN has some additional powergating features beyond what is
supported on ON/LN.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: add support for ASPM on SI asics (v2)

Enables PCIE ASPM (Active State Power Management) on
SI asics.

v2: fix typo

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>