deinterlace: there's a change to hang in shutdown [1/1]

PD#OTT-778

Problem:
1.kernel received reboot command, but hang in shutdown

Solution:
move tasklet_disable behind tasklet_kill

Verify:
P321

Change-Id: I994c21c5aeb42dbbb4e3b50ccac8376db4d4039d
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>

dtv_demod: for dtmb no signal issue [1/1]

PD#172587

Problem:
for dtmb no signal issue

Solution:
update status to "read status" interface

Verify:
verified by t962x2_x301

Change-Id: I6099d2dbe4dcdc23c3a4bd9e489113b26429f2ec
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>

arm: dts: tl1: enable thermal cpucore cooling devices [1/1]

PD#SWPL-2605

Problem:
tl1 no cpucore cooling devices

Solution:
add cpucore cooling devices

Verify:
tl1 skt/x301 pass

Change-Id: If6d98adf2e71b17bb6b50dd569a9a0c94a8b300d
Signed-off-by: Huan Biao <huan.biao@amlogic.com>

arm: dts: tl1: add clock-latency property for dvfs [1/1]

PD#TV-1242

Problem:
dvfs set governor failed.

Solution:
add clock-latency property for dvfs

Verify:
teset pass on x301

Change-Id: I79a4d1a23024730a08926b56ade8e2ed46934d69
Signed-off-by: Hong Guo <hong.guo@amlogic.com>

arm: dts: tl1: config device on portB with dts [1/1]

PD#172587

Problem:
configuration for portB in dtsi can not support
the sdcard and sdio at same time.

Solution:
move the device configuration into dts.
SKT->SDCARD
REF->SDIO

Verify:
test pass on tl1 skt and ref board

Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
Change-Id: I6d1da7a8d0d8d901c4a40a74f04973c155188ade

osd: osd: recovey mode always blank [1/1]

PD#TV-1287

Problem:
recovey mode always blank

Solution:
set right condition to enable free_scale

Verify:
verified on P321 board

Change-Id: I2f70b9c5436b30156f157a3297a11a2ef1cfec67
Signed-off-by: Jian Cao <jian.cao@amlogic.com>

osd: adjust free_scale_dst if interlaced [1/1]

PD#SWPL-2600

Problem:
osd display half menu when in 1080i

Solution:
osd: adjust free_scale_dst if interlaced

Verify:
verify by p212

Change-Id: Ie9faffbb5942faa317b380ca0cdbee072a30c01f
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Signed-off-by: Jian Cao <jian.cao@amlogic.com>

osd: osd: a black line below the screen when play video [1/1]

PD#SWPL-2558

Problem:
a black horizontal line below the screen when play video

Solution:
set dummy data alpha

Verify:
verified on p321

Change-Id: I36dc924b9bc89f4f8ea61eb86c6f5bc9199e40ae
Signed-off-by: Jian Cao <jian.cao@amlogic.com>

osd: call osd_update_enable if needed [2/2]

PD#SWPL-2580

Problem:
The vd1 postblend bit in vpp misc is overwriten.

Solution:
osd: call osd_update_enable if needed

Verify:
verify by p212

Change-Id: I438848dc843ea370d65dc3c6b4befb32d1f2b5f8
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>

video: vpp: add more check for vd1 postblend in vpp_misc [1/2]

PD#SWPL-2580

Problem:
The vd1 postblend bit in vpp misc is overwriten.

Solution:
add more check for vd1 postblend bit in vsync

Verify:
verify by p212

Change-Id: I367e920c13764af41446d7d759aaf8388fb08722
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>

lcd: update pll setting for tl1 tcon_pll performance [1/1]

PD#172587

Problem:
tcon pll performance is not good when frac enabled with old setting

Solution:
update tcon pll setting

Verify:
x301

Change-Id: Ib5deb5c643afa243876c0e4703f835e503fffc2e
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>

arm: dts: tl1: add adc_keypad node for tl1 [1/1]

PD#172587

Problem:
adc_keypad driver is not enabled in tl1

Solution:
add adc_keypad node in dts

Verify:
test pass on x301

Change-Id: I3946297e710c5753d6f9425ec56bf6def94db941
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>

frame_sync: fix last few seconds of the DD+ stream are not smooth [4/4]

PD#SWPL-714

Problem:
The last few seconds of the DD+ stream are not smooth by DTV playback.

Solution:
check the apts and vpts both discontinue,then replay the stream.

Verify:
P321

Change-Id: I6cbbdecc052dfe9fef76b44f36545b231332ee12
Signed-off-by: Yinming Ding <yinming.ding@amlogic.com>

dvb: tuner: USB DVB tuner support from Google

PD#SWPL-932

Problem:
USB DVB Dongle search program Function is not implemented

Solution:
merge usb dvb tuner from kernel3.14
http://10.8.9.5/kernel/common/commit/?h=amlogic-3.14-dev&id=7af9c5c38efdc96f5d3235f17788232a630b3d32
fixed frontend.h structures

Verify:
Ampere P

Change-Id: I16d68c2507711eda43313619d210d05699abcc25
Signed-off-by: qi duan <qi.duan@amlogic.com>

dv: fix the flickered problem [1/1]

PD#SWPL-1207

Problem:
fix the filckered problem when playing transition
video in sdr tv

Solution:
when dv core2 don't run, the reset can't be executed

Verify:
r321

Change-Id: I719325f1722589e02a40d46442258b0d1e3feb17
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>

display: Modify the value of register afbc_gclk_ctrl [1/1]

PD#SWPL-2565

Problem:
The splash screen problem for first frame after starting up.

Solution:
Modify the value of register afbc_gclk_ctrl.

Verify:
u211

Change-Id: Ie1ddfade0566ff8cd571c43ba8490a8c277a8758
Signed-off-by: Peng Yixin <yixin.peng@amlogic.com>

picdec: add mmap interface for picdec [2/2]

PD#SWPL-2280

Problem:
play picture crash

Solution:
add mmap interface for picdec

Verify:
verify by p321

Change-Id: Ib278de80035b0404884315e29fe933cd8f4b6cfe
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>

dts: fix SD card read issue for g12a board [2/3]

PD#SWPL-2588

Problem:
g12a u220/u221 boad cann't read SD card

Solution:
auto detect revA and revB chip

Verify:
test pass on u220/u221 board

Change-Id: Ia153bb3f966fe2a58d5f3ed1bf1d3f610d00ff5a
Signed-off-by: Sandy Luo <sandy.luo@amlogic.com>

dts: correct ge2d irq number [1/1]

PD#SWPL-2091

Problem:
ge2d timeout cause cts fail

Solution:
correct ge2d irq number to 150

Verify:
T962-P321-DDR4

Change-Id: Id84a91fdd139cc227da907d8c8106cb824d43be4
Signed-off-by: Jiacheng Mei <jiacheng.mei@amlogic.com>

dts: reduce isp memory usage [1/1]

PD#SWPL-2512

Problem:
isp reserved mem too large

Solution:
reduce isp mem to 256M

Verify:
A311D-W400

Change-Id: I33ee2872daf961da5f0ba4ba4810b0ac9690e45f
Signed-off-by: Jiacheng Mei <jiacheng.mei@amlogic.com>

osd: osd: screen blank after boot logo [1/1]

PD#172587

Problem:
screen blank after boot logo

Solution:
correct default display information

Verify:
verified on tl1 ref board

Change-Id: I94237b5241eacee6965bfe4ea0426bb8e9f494f1
Signed-off-by: Jian Cao <jian.cao@amlogic.com>

amvecm: fix dnlp read scurv_mid2 debug interface error [1/1]

PD#SWPL-2448

Problem:
can not read dnlp scurv_mid2 value

Solution:
fix the error

Verify:
t962x_r311

Change-Id: I7a7df769dd117fd83164065f6df8e3ae82c2499f
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>

cec: auto shutdown case crash [1/1]

PD#SWPL-2258

Problem:
1.running autoshutdown cause device crashed

Solution:
1.optimize cec power on proble flow

Verify:
1.p212

Change-Id: Ia78c76cdb4b72a1a275628b3ad77ea6d71696d89
Signed-off-by: Yong Qin <yong.qin@amlogic.com>

hdmitx: disable encryption hdcp1.4 fail [1/1]

PD#SWPL-2302

Problem:
Play online video,half an hour later, the TV shows
a pink screen and the sound is normal.

Solution:
Check hdcp1.4 status and disable encryption when fail.

Verify:
S922X

Change-Id: I6ce51824726b267d140750f9e9d80aa8bb921cac
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>

dts: add txl support of arm pmu [1/1]

PD#SWPL-2096

Problem:
32bit_kernel CtsSimpleperfTestCases modules 39 fail

Solution:
txl dts is not ready
modify dts

Verify:
p321

Change-Id: Ib922ec4f4a1c421d76e1f397b321d4050fda2c84
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>

display: fix logo address missmatch problem [1/1]

PD#TV-1083

Problem:
When bootimg, logo display become blur due to logo address
is not match

Solution:
Correct CMA address of logo

Verify:
p321

Change-Id: I3996635c4fc9cee1751c75aff3f8224adb2accde
Signed-off-by: tao zeng <tao.zeng@amlogic.com>

media: media_sync: remove serial port debug logs [1/1]

PD#SWPL-2494

Problem:
serial port always print timestamp log

Solution:
remove this log output

Verify:
P321

Change-Id: I875dffab483269374b9939f556a3ed01e9d2b215
Signed-off-by: xiaoming.sui <xiaoming.sui@amlogic.com>

tvin: vdin: hdmirx format change, display exception [1/1]

PD#SWPL-2411

Problem:
hdmirx input 4096X2160 yuv422 in a short period of time,
formate change form yuv422 to yuv444, screen display is exception.

Solution:
force malloc yuv444 size

Verify:
Verify on txlx r311

Change-Id: Ie670b9a2b0c1eceffe423a1cf8606e78b6b347cd
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>

DTS: p230 board config spdif out pin [3/3]

PD# SWPL-1223

Problem:
p230 board spdif out no audio sound

Solution:
config p230 board spdif out pin

Verify:
verify on p230

Change-Id: I0c35e6d526aab98955206f78322fcc873ff01b8c
Signed-off-by: Chaomin Zheng <chaomin.zheng@amlogic.com>

dts: GXL/TXL: adjust defendkey_reserved location [1/1]

PD#SWPL-2539

Problem:
defendkey_reserved have influenced on display
during the system boot up

Solution:
adjust defendkey_reserved node location

Verify:
GXL/TXL skt board verify pass

Change-Id: I5cf0245f9653e20224c4e3bab1f6f05527011210
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>

lcd: update lvds,vbyone,p2p config [1/1]

PD#172587

Problem:
lcd not work on real chip

Solution:
update pll, phy and channel_swap config

Verify:
skt

Change-Id: I737f7c253697ed281050ad9606cbf7d86a4b2e39
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>

cec: update cec platform data for tl1 [1/1]

PD#172587

Problem:
the line check always return low.
the print of check too much.

Solution:
modify the cec gpio from 7 to 10.
modify the check line.

Verify:
tl1 x301 board

Change-Id: I09ae5eee455d83e51e65957cd293e07da1c0046a
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>

hdmirx: clean phy setting for tl1 [1/1]

PD#172587

Problem:
1.clean phy setting

Solution:
1.put the phy data into a table
2.modify phy setting for low voltage tmds clk

Verify:
tl1

Change-Id: I8cad5d0639f72b17b90196f6143784f7b91dcdbc
Signed-off-by: Yong Qin <yong.qin@amlogic.com>

tvin: vdin: tl1 improve vdin function [1/1]

PD#172587

Problem:
1.in the afbce mode,
  screen flicker when serial port print too many debugging information
2.vdin afbce 4K crash
3.viu loop back error
4.need afbce lossy mode

Solution:
1.vdin use rdma mode
2.change vdin afbce buff size
3.change VDIN_ASFIFO_CTRL3 register
4.add lossy mode

Verify:
x301

Change-Id: Id66c0d7df22a9aeaca15d645f9a2ce0ecf47be3f
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>

tvin: vdin: tl1 improve vdin afbce function  [1/1]

PD#172587

Problem:
vdin afbce can not work well

Solution:
change afbce work mode

Verify:
verify on tl1

Change-Id: I3e980c7488bd8a0eb6f043fd1fb2d2b2bc75140f
Signed-off-by: Xuhua Zhang <xuhua.zhang@amlogic.com>

sr: add support for tl1 [1/1]

PD#172587

Problem:
Add sr driver support for tl1

Solution:
add sr driver support for tl1
fix horizontal line when play video on 4K screen

Verify:
TL1 X301

Change-Id: I422f27eb5cf12f69dc57de295425536671e2df38
Signed-off-by: wenfeng.guo <wenfeng.guo@amlogic.com>

hdmirx: optimizing fsm clk monitor function [1/1]

PD#172587

Problem:
optimizing fsm clk monitor function

Solution:
clock monitor for tl1

Verify:
tl1

Change-Id: I1cf50bcff2e2039b52071902d59deb17b6d01385
Signed-off-by: Yong Qin <yong.qin@amlogic.com>

hdmirx: optimizing rx fsm for tl1 [1/1]

PD#172587

Problem:
1.optimizing rx fsm for tl1, some time cable
clk not stable

Solution:
1.use system clk measure
2.modify low frq phy and pll setting
3.fsm stable state add error cnt check

Verify:
tl1

Change-Id: I6b9078bdf73fc0a2269ed9386fd42db0678cf995
Signed-off-by: Yong Qin <yong.qin@amlogic.com>

hdmirx: finetune phy setting [1/1]

PD#172587

Problem:
1.eq performacec is not good (v1)
2.capture tmds raw data to ddr
3.skip unstable cable clock report

Solution:
1.dump tmds date and save as a file
2.1s check err counter
3.modify clock monitor function
4.modify fsm for tl1

Verify:
tl1

Change-Id: Iae51ea0cc8528e9c5fd0bc5c58b5dd7246ee68b1
Signed-off-by: Yong Qin <yong.qin@amlogic.com>

hdmirx: tl1 hdmirx no interrupt [1/1]

PD#172587

Problem:
1.no interrupt
2.add fsm debug log

Solution:
1.change interrupt id
2.change interrupt source
3.change 6g phy setting
4.add axi clk
5.verify emp pkt data to ddr

Verify:
1.verify on chip

Change-Id: I349439d90a356144b96af4831e03fa0e9e90076b
Signed-off-by: Yong Qin <yong.qin@amlogic.com>

hdmirx: modify audio pll setting [1/1]

PD#172587

Problem:
1.audio divider it's not work

Solution:
1.modify audio top clk measure
2.modify audio divider clk source
3.modify audio divider band gap

Verify:
tl1

Change-Id: Iea254f043531f31383a727c58b4d992dd39ff2ce
Signed-off-by: Yong Qin <yong.qin@amlogic.com>

cec: add device match for tl1 [1/1]

PD#172587

Problem:
add device match for tl1

Solution:
1.add cecb ver
2.add ceca status reg flag

Verify:
1.run TPM
2.run chip

Change-Id: I304abfd1d6f1f216f9f0c56ca19a8bdb2ccfeabb
Signed-off-by: Yong Qin <yong.qin@amlogic.com>

hdmirx: fix phy init err and add debug [1/1]

PD#172587

Problem:
1.cable clk is not match from clk measure
2.add some debug interface for tl1

Solution:
1.add audio clock source from tmds
2.add audio clock source from mpll
3.low FRQ phy audio clock out is 4xtmds clk
4.add 6G phy setting
5.match clock measure return value hz
6.phy initial enable terminal by input source
7.add channel switch control 0/1
8.last line,mode:4k2k 420 deep color problem
9.dump register, add error cnt for tl1
10.capture emp data into a file
11.modify tmds data align, snps phy disable

Verify:
1.run ptm
2.verify on chip

Change-Id: I9d003748c0df3dfbd25f7ab987449e2097251c58
Signed-off-by: Yong Qin <yong.qin@amlogic.com>

cvbs: cvbsoutput support for tl1 [1/1]

PD#172587

Problem:
no cvbsoutput

Solution:
add cvbsoutput

Verify:
test pass on x301

Change-Id: I92f70d26e32f95de7c63ddbac9fe6664063c1902
Signed-off-by: Nian Jing <nian.jing@amlogic.com>

video: vpp: add vd afbc YUV 422/444 support for tl1 [1/1]

PD#172587

Problem:
Bringup TL1 vidoe driver.
TL1 need support YUV422/444 AFBC.
TL1 need check afbc source from decode or vdin.
TL1 need afbc compress loss mode.

Solution:
Merge from branch bringup/amlogic-4.9/tl1-20181111.

Verify:
verify on tl1

Change-Id: I0af62e7638db4e1c349df874ccffdeddcaa715af
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>

osd: osd: screen blank when boot [1/1]

PD#172587

Problem:
screen blank when boot

Solution:
modify free_scale_switch

Verify:
verified on tl1 dev board

Change-Id: I3c53e832c83c71bd8e98f71fcd654865a467df3c
Signed-off-by: Jian Cao <jian.cao@amlogic.com>

osd: osd: reserve vs_ctrl bit for VPP [1/1]

PD#172587

Problem:
reserve vs_ctrl bit for VPP

Solution:
Avoid operating VPP_OFIFO_SIZE bit19 on OSD code

Verify:
verified on t962x2_x301

Change-Id: Ic450d6f64e2349d97d02f0802058b4031564fea4
Signed-off-by: Jian Cao <jian.cao@amlogic.com>

osd: add viu2 support for tl1 [1/1]

PD#172587

Problem:
add viu2 support for tl1.

Solution:
add viu2 support for tl1.

Verify:
verified by x301

Change-Id: Ie728f6ee7e0c4c4062e5e12e3d80515d99d020f8
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>

osd: tl1 hold line fix needn't shift workaround [1/1]

PD#172587

Problem:
tl1 hold line fix needn't shift workaround.

Solution:
remove shift workaround int tl1

Verify:
verified by x301

Change-Id: I96d99758ba6f93622c34a8e69c4a3f769fdfad49
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>

deinterlace: add support for tl1 [1/1]

PD#172587

Problem:
bringup tl1

Solution:
add deinterlace driver support for tl1

Verify:
verified on tl1 x301

Change-Id: I3bf008a4f948cdc2c11f14f81944695d6a185b14
Signed-off-by: wenfeng.guo <wenfeng.guo@amlogic.com>

dtv_demod: add DTV demod driver for tl1 [1/1]

PD#172587

Problem:
add DTV demod driver for tl1

Solution:
add DTV demod driver for tl1

Verify:
verified by t962x2_x301

Change-Id: I27e88090aa51c0385867cee4d31a5a75192cf650
Signed-off-by: Zhiwei Yuan <zhiwei.yuan@amlogic.com>

tvafe: add tvafe support for tl1 [1/1]

PD#172587

Problem:
tl1 do not support tvafe

Solution:
add tvafe support

Verify:
test pass on x301

Change-Id: I34185a3f10e7540b7c2317c270a306b8904e0ca3
Signed-off-by: Nian Jing <nian.jing@amlogic.com>

arm: dts: tl1: update emmc dt for tl1 [1/1]

PD#165583

Problem:
bringup tl1 emmc

Solution:
1.set DDR52 MODE
2.add sdio node in dts
3.hs200 busmod

Verify:
test pass on tl1

Change-Id: I5b5c8bff18093f444e67b8e32e2a46c25ddf1a10
Signed-off-by: ruixuan.li <ruixuan.li@amlogic.com>

amvecm: pq: lc: update local contrast setting [1/1]

PD#172587

Problem:
update lc setting

Solution:
update lc setting
add demo mode

Verify:
verified on ref board x301

Change-Id: Ie1542af5e4d8e4fe2c52bd04db66cbdf9130853f
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>

atv_demod: add atv demod support for tl1 [1/1]

PD#172587

Problem:
1.add atv demod driver and dts config for tl1.
2.merge from bringup/amlogic-4.9/tl1-20181111.

Solution:
add atv demod driver and dts config for tl1

Verify:
verified by t962x2_x301

Change-Id: Ibbc00f9d478a9f5e52c6333b9a819aac381894ec
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>

audio: auge: fix drivers for tl1 [1/1]

PD#172587

Problem:
resample, eqdrc, dolby efuse, audio input (from atv, hdmirx)

Solution:
add drivers for them

Verify:
x301

Change-Id: I5187f9824d904283794f6e4be3dd9ce8463908e1
Signed-off-by: Xing Wang <xing.wang@amlogic.com>

emmc: modify cophase for tl1 [1/1]

PD#172587

Problem:
emmc data crc error

Solution:
modify cophase under kernel for tl1

Verify:
test pass on skt

Change-Id: Id4997ef2288a53e6f401744664aaf6b05cf36e38
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>

spicc: fix miss bytes/time consume/loopback issue [1/1]

PD#SWPL-215

Problem:
1. additional or missing bytes be sent on mosi sometimes.
2. Customer DSP load firmware through SPICC. the loading time is 12s with
buildroot release 20180907 while 6s with 20180131.
3. rx error when work in loopback mode at high speed.

Solution:
1. change to disable irq at the irq-handle begining;
change to enable irq after all data pulled.
2. pre-setup of every spi transfer spends most of time on clk_set_rate().
this time is not obvious while cpu work at a high frequence such as
1000MHz.
In fact, a slave speed is almost fixed and we needn't set it for every
transfer but set only when speed changed.
3. disable auto io delay when in loopback mode.

Verify:
verified on axg-s400-v03 and tl1-skt

Change-Id: I61bcceccc243b218879b2b0711d0aff7538151f6
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>

usb: bringup usb for tl1 [1/1]

PD#172587

Problem:
bringup usb for tl1

Solution:
bringup usb for tl1.
disable usb device sof interrupt for tl1.

Verify:
verify on tl1 skt.

Change-Id: Ifbcd3b406145ac39709ff2df795544086277f00e
Signed-off-by: Yue Wang <yue.wang@amlogic.com>

efuse: tl1: add efuse burning support [1/1]

PD#172587

Problem:
efuse: tl1: need to add efuse burning support

Solution:
efuse: tl1: add efuse burning support

Verify:
TL1 skt board verify pass

Change-Id: Id65f182c71fc6f3f2b2536bbb6b859ad2f558360
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>

irblaster: meson: add support for tl1 [1/1]

PD#172587

Problem:
1.Bringup TL1.
2.Invalid frequency setting

Solution:
1.Add ir blaster device tree for tl1.
2.Add frequency setting

Verify:
verify on tl1.

Change-Id: I51759e32577172ff766fd4d50f92a00ef77c7495
Signed-off-by: Bichao Zheng <bichao.zheng@amlogic.com>

pinctrl: meson: update pin groups for tl1 [1/1]

PD#172587

Problem:
some pin groups are not supported

Solution:
update pin groups according to pinmux document v8.

Verify:
TL1 skt board.

Change-Id: I88750e307208fd30c20343c1c5418c1035961b4e
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>

clk: tl1: bringup clock for tl1 [1/1]

PD#172587

Problem:
Bringup clock for tl1.

Solution:
Bringuup clock for tl1.
Cherrypick from bringup/amlogic-4.9/tl1-20181111

1. Add hdmirx meter clock
2. fix gp0 pll error
3. remove vpu_clk enable in clktree
4. add hdmi axi clock
5. fix tl1 mpll clk overflow issue
6. fix vapb clock error rate
7. add 1.404G and 1.5G cpu freqs for tl1

Verify:
TL1 T962X2 X301 & SKT

Change-Id: I73a9afca35f8a9ce26cc6f3a75a738525fc8d728
Signed-off-by: Jian Hu <jian.hu@amlogic.com>

arm: dts: tl1: add device tree for skt and x301 boards [1/1]

PD#172587

Problem:
Bringup tl1 skt & x301.

Solution:
Add device tree for skt and x301 boards.

Verify:
test pass on skt board

Change-Id: Ia6c16be242b5cc430a38ec6b9cac8c320f7339d7
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Bo Yang <bo.yang@amlogic.com>

framebuffer: remove lock in fbmem ioctl. [1/1]

PD#SWPL-2497

Problem:
on 32bit kernel, when user space call WAITFORVSYNC,
we cannot send other command to framebuffer.

Solution:
remove lock in fbioctl as fb compat_ioctl do.
Our driver have locks to protect internal resources.

Verify:
verified on franklin.

Change-Id: I1789c09a7ea459aed4b782748847687c7f974526
Signed-off-by: sky zhou <sky.zhou@amlogic.com>

dv: fix osd color matrix when dv enabled [1/1]

PD#SWPL-1804

Problem:
fix osd color matrix when dv enabled

Solution:
enable osd matrix when dv enabled

Verify:
verified on u212 dev board

Change-Id: I4b4206f4d8c447873f23a3a0066af0d0fa85e18c
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>

osd: fix osd color error when osd hdr enabled [1/1]

PD#SWPL-1804

Problem:
osd color error when osd hdr enabled

Solution:
div alpha when osd hdr enabled

Verify:
verified on u212 dev board

Change-Id: I1f5ea0db404d1956f454bd5da2532bded89626ee
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>

osd: add meson-hwc repodution rate support [1/2]

PD#SWPL-1810

Problem:
osd blend repodution rate not supported

Solution:
add meson-hwc repodution rate support

Verify:
verified on u212 dev board

Change-Id: Ied10393e240e8d3f2a1eefe17a2d4d3c965e3383
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>

dts: TXL: defendkey: support secure upgrade check [1/1]

PD#SWPL-2343

Problem:
TXL need to support secure upgrade check

Solution:
add defendkey support in all TXL dts

Verify:
TXL skt board verify pass

Change-Id: Idb81fa1f1b5a27e5c44dc961ceef94f1edfc06d9
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>

hdmirx: optimize for audio fifo [1/1]

PD#SWPL-2114

Problem:
When change audio channel count on VG-877, the subpkts of skipped
middle channels are still carried, thus causing afifo overflow

Solution:
When afifo overflow, then store all audio subpkts(8ch)
into afifo, and output 8ch audio from afifo

Verify:
R321

Change-Id: I4b0933935d3a1aed20be10a7a8d3fe23c3a39323
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>

dts: GXL: defendkey: support secure upgrade check [3/3]

PD#SWPL-2100

Problem:
GXL need to support secure upgrade check

Solution:
add defendkey support in all GXL dts

Verify:
GXL skt board verify pass

Change-Id: I73b84b86f23f512ddc556b61f3a07d015c717e8c
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>

GXL: defendkey: support secure upgrade check [2/3]

PD#SWPL-2100

Problem:
GXL need to support secure upgrade check

Solution:
1.add dtb decrypt support
2.add 32bit defendkey support

Verify:
GXL skt board verify pass

Change-Id: I501967530b2a61d9b90c20241b82f92b00829453
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>

PM_SUSPEND: suspend: set wakeup reason to stick mem [2/2]

PD#SWPL-2287

Problem:
set wakeup reason to stick mem

Solution:
set wakeup reason to stick mem

Verify:
gxl,test pass

Change-Id: Iff6f1824ea4ac9ec12b8295d4283992fdac03b14
Signed-off-by: Hong Guo <hong.guo@amlogic.com>

Merge "deinterface: temporary remove afbc support on chip after g12a [1/1]" into amlogic-4.9-dev

dts: aarch32: modify timer for aarch32 [1/1]

PD#SWPL-2383

Problem:
32bit_kernel VtsKernelLinuxKselftest module 1 fail

Solution:
modify timer for aarch32

Verify:
p321

Change-Id: I9ef79e927f3244223dbbb57bcc6155c1ffc8989c
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>

deinterlace: fix CMA layout adaptation di_cma_reserved [1/1]

PD#SWPL-2308

Problem:
CMA layout adaptation di_cma_reserved cause crash

Solution:
fix CMA layout adaptation di_cma_reserved

Verify:
P321

Change-Id: Ia24e811a02d47d70afa1c06361fd0852c357394c
Signed-off-by: wenfeng.guo <wenfeng.guo@amlogic.com>

Revert "arm: dts: tl1: add tl1 device tree fils [1/1]"

This reverts commit 32cfa235e3c9b543c396083068d107a800a93fdb.

Change-Id: I23d0e860bd858e1a9982151977524b178524842a
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>

deinterface: temporary remove afbc support on chip after g12a [1/1]

PD#172587

Problem:
afbc now support on chip txlx and g12a,
but we use cpu_after_eq(G12A) to judge
if afbc is support or not.

Solution:
use is_meson_g12a_cpu() replace cpu_after_eq(G12A).

Verify:
u200(g12a),t962x_r311

Change-Id: I3fb7ed54f7137fada97481177e40a2543cf8df9f
Signed-off-by: huaihao guo <huaihao.guo@amlogic.com>

arm: dts: tl1: add tl1 device tree fils [1/1]

PD#172587

Problem:
Bringup TL1 support.

Solution:
Add tl1 device tree files to support tl1 boards.
This device tree files are copied from bringup branch:
bringup/amlogic-4.9/tl1-20181111

Verify:
The device tree files has been verified on bringup branch:
bringup/amlogic-4.9/tl1-20181111

Change-Id: Ie85f59a0293319a3511371ab69f3ce07f0fefed3
Signed-off-by: Bo Yang <bo.yang@amlogic.com>

vdac: fix atv/dtv resume no signal issue [1/1]

PD#SWPL-2351

Problem:
atv/dtv no signal when suspend after switch from hdmi

Solution:
disable vdac bandgap when suspend

Verify:
test pass on P321

Change-Id: I0449f0d9673f46928b8951249f5759a4a1f16562
Signed-off-by: Nian Jing <nian.jing@amlogic.com>

vpp: fix p212 osd sdr2hdr luma too dark compile [1/1]

PD#SWPL-1707

Problem:
{NTS}Manual,HDR-001-TC2 Failed step 8/12/16/20 VID
and GFX doesn't match

Solution:
add osd hdr2sdr convert table for 400nit on p212

Verify:
verify on p212

Change-Id: I16637652b6d07ba81b25f46c2684ff7ae3e1c68c
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>

vpp: fix p212 osd sdr2hdr luma too dark [1/1]

PD#SWPL-1707

Problem:
{NTS}Manual,HDR-001-TC2 Failed step 8/12/16/20 VID
and GFX doesn't match

Solution:
add osd hdr2sdr convert table for 400nit on p212

Verify:
verify on p212

Change-Id: I9a9dcf13ab0deaa8b676c5c409919367420b6d1b
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>

ramdump: fix a warning of cast [1/1]

PD#165764

Problem:
have a warning of the "ram" variable cast.

Solution:
add a "void *" to the ram variable.

Verify:
test locally.

Change-Id: I037a89a28e98ae8c8ab965e908877bf4a72d3ead
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>

dtv_demod: fix dtv demod crash switch once every 2s [1/1]

PD#SWPL-2293

Problem:
dtv demod switch once every 2s cause crash

Solution:
fix dtv demod crash switch once every 2s

Verify:
P321

Change-Id: Ibfd919a503e3dae41f51637cdff6e01ed27bac71
Signed-off-by: wenfeng.guo <wenfeng.guo@amlogic.com>

avsync: tsync: fix the avsync problem [1/1]

PD#SWPL-1158

Problem:
The video will become un-smooth after change
between several audio languages

Solution:
when apts and vpts distance is large then 60*90000
then set the tsync mode to vmaster and  set the tysnc
enable to 0

Verify:
P321

Change-Id: I7c7e32f49ca12645cf6a1aa58caeb968a9234c8c
Signed-off-by: live.li <live.li@amlogic.com>

ramdump: add ramdump support for ARM32 [1/1]

PD#165764

Problem:
ramdump is not enabled on ARM32

Solution:
Enable it and fix compatible with ARM64

Verify:
R311

Change-Id: I337ef019ecab05d25b7d9dc0cacab7a03149aa7b
Signed-off-by: tao zeng <tao.zeng@amlogic.com>

amvecm: pq: add dnlp/bri/contrast for tl1 [1/1]

PD#172587

Problem:
dnlp/bri/contrast can not finetune

Solution:
1. add dnlp regisiter 10bit write
2. add brightness/contrast/sr for tl1

Verify:
verify on tl1

Change-Id: I90b363f57fbf2cd485e2acaddb5ce60a8715a47b
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>

irblaster: add synchronous transmit [1/1]

PD#SWPL-2170

Problem:
cts fail
android.hardware.consumerir.cts.ConsumerIrTest#test_timing

Solution:
add synchronous transmit
when it returns the pattern has been transmitted

Verify:
verify on franklin

Change-Id: I7e490236e5effc13f81e4fab3a1c7fc10c5dcfb3
Signed-off-by: Wencai You <wencai.you@amlogic.com>

vrtc: vrtc time update for stick mem [2/2]

PD#174867

Problem:
vrtc time update for stick mem.

Solution:
vrtc time update for stick mem.

Verify:
g12a txl.

Change-Id: I65074422569370b253882a4e66fb771da10ccdbf
Signed-off-by: Hong Guo <hong.guo@amlogic.com>

dts: r314: increase board dts file [2/3]

PD#SWPL-1978

Problem:
bring up board r314.

Solution:
increase board dts file

feature:
The Dts file with Einstein is identical except for the memory difference
R314 1.5G, Einstein 1G.

Verify:
Verified on txlx_t962x_r314  board.

Change-Id: I271cb92a9cbcab174fb0bb76cfbc8beff9c730d3
Signed-off-by: guotai.shen <guotai.shen@amlogic.com>

dts: the memory of the reserved 1MB was recovered. [1/1]

PD#SWPL-2250

Problem:
h265 & vp9 4K playback abnormal because HEVC FRONT &
VPU READ2 pollute the phy address of near 0x0.

Solution:
it's only a temporary modification, the real reason
needs to take more time fixed.

Verify:
U212

Change-Id: I3dcc47f8979960e95c89cf53fe10eadc1a7ae5ad
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>

ionvideo: Add thread stop protection when the process exits [1/1]

PD#SWPL-1689

Problem:
The thread still exists when the process exits

Solution:
Check if the thread exits when the process exits

Verify:
local

Change-Id: I6d805da6bfa0df85b6d39d065c95eed49b3cb7da
Signed-off-by: Renjiang Han <renjiang.han@amlogic.com>

mmc: fixup toshiba emmc secure discard [1/1]

PD#SWPL-1937

Problem:
secure discard and trim may cost 5mins on toshiba
"004GA0" emmc.

Solution:
using normal discard operation instead.

Verify:
W400

Change-Id: I7fd23867f8ae0af9192377de8f8c15609ef809ed
Signed-off-by: Yonghui Yu <yonghui.yu@amlogic.com>

deinterlace: fix kasan bug in di_task_handle [1/1]

PD#173820

Problem:
kasan bug in di_task_handle

Solution:
delete cma_mutex because it has no effect

Verify:
P321

Change-Id: Ie6ca7973576e7350870c5466b54b38b490dff65e
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>

ddr: fix dmc_monitor register bit missmatch on G12A/G12B [1/1]

PD#172256

Problem:
On G12A/G12B, bit for ddr0 protection 0 vilation is not same

Solution:
Fix bit missmatch problem

Verify:
U212

Change-Id: I5dca14c8bc96bdcb85dbe8bbd5a9a18157834bcf
Signed-off-by: tao zeng <tao.zeng@amlogic.com>

hdmitx: fix wrong power uevent in suspend/resume [1/1]

PD#SWPL-1931

Problem:
Wrong hdmi_power uevent in suspend/resume flow

Solution:
Remove current mode judgement

Verify:
R321

Change-Id: Ib36e8d6cb4988f7b2be91146b12e974c194526ca
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>

backlight: ldim: update usage for new spi driver [1/1]

PD#SWPL-1603

Problem:
don't support old spi driver now

Solution:
update new spi driver api for ldim driver

Verify:
txlx r311

Change-Id: I4dff13e4cab5666a30488730e27c6275b933a922
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>

dts: dtsi: add dtsi for ab update [1/6]

PD#SWPL-1513

Problem:
ab update can not work on P

Solution:
add dtsi for ab update for P

Verify:
test pass in ampere

Change-Id: I6ff219170a16c0081fba7297110e8dfaadcff401
Signed-off-by: Xindong Xu <xindong.xu@amlogic.com>

DolbyFW: Dolby Firmware Protection Driver create [1/1]

PD#SWPL-739

Problem:
Dolby Firmware Protection Driver create.

Solution:
AXG support Dolby Firmware Protection.

Verify:
AXG S400

Change-Id: Id88ba3f99103f2978827a3394203f7eef6d889f4
Signed-off-by: Yan Wang <yan.wang@amlogic.com>

emmc: clean emmc reg val for probe [1/1]

PD#SWPL-2286

Problem:
emmc response crc error in emmc init.

Solution:
clean emmc reg val from uboot to kernel.

Verify:
w400

Change-Id: I6a4763187f18e9e284c887c5c788f3a88c8548ff
Signed-off-by: Nan Li <nan.li@amlogic.com>