Bob Ham [Wed, 24 Jul 2019 14:52:27 +0000 (07:52 -0700)]
net: usb: qmi_wwan: Add the BroadMobi BM818 card
[ Upstream commit
9a07406b00cdc6ec689dc142540739575c717f3c ]
The BroadMobi BM818 M.2 card uses the QMI protocol
Signed-off-by: Bob Ham <bob.ham@puri.sm>
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Ujfalusi [Fri, 26 Jul 2019 06:42:43 +0000 (09:42 +0300)]
ASoC: ti: davinci-mcasp: Correct slot_width posed constraint
[ Upstream commit
1e112c35e3c96db7c8ca6ddaa96574f00c06e7db ]
The slot_width is a property for the bus while the constraint for
SNDRV_PCM_HW_PARAM_SAMPLE_BITS is for the in memory format.
Applying slot_width constraint to sample_bits works most of the time, but
it will blacklist valid formats in some cases.
With slot_width 24 we can support S24_3LE and S24_LE formats as they both
look the same on the bus, but a a 24 constraint on sample_bits would not
allow S24_LE as it is stored in 32bits in memory.
Implement a simple hw_rule function to allow all formats which require less
or equal number of bits on the bus as slot_width (if configured).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190726064244.3762-2-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Navid Emamdoost [Tue, 23 Jul 2019 22:11:51 +0000 (17:11 -0500)]
st_nci_hci_connectivity_event_received: null check the allocation
[ Upstream commit
3008e06fdf0973770370f97d5f1fba3701d8281d ]
devm_kzalloc may fail and return NULL. So the null check is needed.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Navid Emamdoost [Tue, 23 Jul 2019 22:04:30 +0000 (17:04 -0500)]
st21nfca_connectivity_event_received: null check the allocation
[ Upstream commit
9891d06836e67324c9e9c4675ed90fc8b8110034 ]
devm_kzalloc may fail and return null. So the null check is needed.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rasmus Villemoes [Mon, 24 Jun 2019 08:34:13 +0000 (08:34 +0000)]
can: dev: call netif_carrier_off() in register_candev()
[ Upstream commit
c63845609c4700488e5eacd6ab4d06d5d420e5ef ]
CONFIG_CAN_LEDS is deprecated. When trying to use the generic netdev
trigger as suggested, there's a small inconsistency with the link
property: The LED is on initially, stays on when the device is brought
up, and then turns off (as expected) when the device is brought down.
Make sure the LED always reflects the state of the CAN device.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Falcon [Tue, 16 Jul 2019 22:25:10 +0000 (17:25 -0500)]
bonding: Force slave speed check after link state recovery for 802.3ad
[ Upstream commit
12185dfe44360f814ac4ead9d22ad2af7511b2e9 ]
The following scenario was encountered during testing of logical
partition mobility on pseries partitions with bonded ibmvnic
adapters in LACP mode.
1. Driver receives a signal that the device has been
swapped, and it needs to reset to initialize the new
device.
2. Driver reports loss of carrier and begins initialization.
3. Bonding driver receives NETDEV_CHANGE notifier and checks
the slave's current speed and duplex settings. Because these
are unknown at the time, the bond sets its link state to
BOND_LINK_FAIL and handles the speed update, clearing
AD_PORT_LACP_ENABLE.
4. Driver finishes recovery and reports that the carrier is on.
5. Bond receives a new notification and checks the speed again.
The speeds are valid but miimon has not altered the link
state yet. AD_PORT_LACP_ENABLE remains off.
Because the slave's link state is still BOND_LINK_FAIL,
no further port checks are made when it recovers. Though
the slave devices are operational and have valid speed
and duplex settings, the bond will not send LACPDU's. The
simplest fix I can see is to force another speed check
in bond_miimon_commit. This way the bond will update
AD_PORT_LACP_ENABLE if needed when transitioning from
BOND_LINK_FAIL to BOND_LINK_UP.
CC: Jarod Wilson <jarod@redhat.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Charles Keepax [Thu, 18 Jul 2019 08:43:33 +0000 (09:43 +0100)]
ASoC: dapm: Fix handling of custom_stop_condition on DAPM graph walks
[ Upstream commit
8dd26dff00c0636b1d8621acaeef3f6f3a39dd77 ]
DPCM uses snd_soc_dapm_dai_get_connected_widgets to build a
list of the widgets connected to a specific front end DAI so it
can search through this list for available back end DAIs. The
custom_stop_condition was added to is_connected_ep to facilitate this
list not containing more widgets than is necessary. Doing so both
speeds up the DPCM handling as less widgets need to be searched and
avoids issues with CODEC to CODEC links as these would be confused
with back end DAIs if they appeared in the list of available widgets.
custom_stop_condition was implemented by aborting the graph walk
when the condition is triggered, however there is an issue with this
approach. Whilst walking the graph is_connected_ep should update the
endpoints cache on each widget, if the walk is aborted the number
of attached end points is unknown for that sub-graph. When the stop
condition triggered, the original patch ignored the triggering widget
and returned zero connected end points; a later patch updated this
to set the triggering widget's cache to 1 and return that. Both of
these approaches result in inaccurate values being stored in various
end point caches as the values propagate back through the graph,
which can result in later issues with widgets powering/not powering
unexpectedly.
As the original goal was to reduce the size of the widget list passed
to the DPCM code, the simplest solution is to limit the functionality
of the custom_stop_condition to the widget list. This means the rest
of the graph will still be processed resulting in correct end point
caches, but only widgets up to the stop condition will be added to the
returned widget list.
Fixes:
6742064aef7f ("ASoC: dapm: support user-defined stop condition in dai_get_connected_widgets")
Fixes:
5fdd022c2026 ("ASoC: dpcm: play nice with CODEC<->CODEC links")
Fixes:
09464974eaa8 ("ASoC: dapm: Fix to return correct path list in is_connected_ep.")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20190718084333.15598-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wenwen Wang [Sat, 20 Jul 2019 12:22:45 +0000 (07:22 -0500)]
netfilter: ebtables: fix a memory leak bug in compat
[ Upstream commit
15a78ba1844a8e052c1226f930133de4cef4e7ad ]
In compat_do_replace(), a temporary buffer is allocated through vmalloc()
to hold entries copied from the user space. The buffer address is firstly
saved to 'newinfo->entries', and later on assigned to 'entries_tmp'. Then
the entries in this temporary buffer is copied to the internal kernel
structure through compat_copy_entries(). If this copy process fails,
compat_do_replace() should be terminated. However, the allocated temporary
buffer is not freed on this path, leading to a memory leak.
To fix the bug, free the buffer before returning from compat_do_replace().
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Bogendoerfer [Mon, 13 May 2019 11:47:25 +0000 (13:47 +0200)]
MIPS: kernel: only use i8253 clocksource with periodic clockevent
[ Upstream commit
a07e3324538a989b7cdbf2c679be6a7f9df2544f ]
i8253 clocksource needs a free running timer. This could only
be used, if i8253 clockevent is set up as periodic.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilya Trukhanov [Tue, 2 Jul 2019 10:37:16 +0000 (13:37 +0300)]
HID: Add 044f:b320 ThrustMaster, Inc. 2 in 1 DT
[ Upstream commit
65f11c72780fa9d598df88def045ccb6a885cf80 ]
Enable force feedback for the Thrustmaster Dual Trigger 2 in 1 Rumble Force
gamepad. Compared to other Thrustmaster devices, left and right rumble
motors here are swapped.
Signed-off-by: Ilya Trukhanov <lahvuun@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Sun, 25 Aug 2019 08:51:53 +0000 (10:51 +0200)]
Linux 4.9.190
YueHaibing [Wed, 7 Aug 2019 02:19:59 +0000 (10:19 +0800)]
bonding: Add vlan tx offload to hw_enc_features
[ Upstream commit
d595b03de2cb0bdf9bcdf35ff27840cc3a37158f ]
As commit
30d8177e8ac7 ("bonding: Always enable vlan tx offload")
said, we should always enable bonding's vlan tx offload, pass the
vlan packets to the slave devices with vlan tci, let them to handle
vlan implementation.
Now if encapsulation protocols like VXLAN is used, skb->encapsulation
may be set, then the packet is passed to vlan device which based on
bonding device. However in netif_skb_features(), the check of
hw_enc_features:
if (skb->encapsulation)
features &= dev->hw_enc_features;
clears NETIF_F_HW_VLAN_CTAG_TX/NETIF_F_HW_VLAN_STAG_TX. This results
in same issue in commit
30d8177e8ac7 like this:
vlan_dev_hard_start_xmit
-->dev_queue_xmit
-->validate_xmit_skb
-->netif_skb_features //NETIF_F_HW_VLAN_CTAG_TX is cleared
-->validate_xmit_vlan
-->__vlan_hwaccel_push_inside //skb->tci is cleared
...
--> bond_start_xmit
--> bond_xmit_hash //BOND_XMIT_POLICY_ENCAP34
--> __skb_flow_dissect // nhoff point to IP header
--> case htons(ETH_P_8021Q)
// skb_vlan_tag_present is false, so
vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan),
//vlan point to ip header wrongly
Fixes:
b2a103e6d0af ("bonding: convert to ndo_fix_features")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YueHaibing [Thu, 8 Aug 2019 06:22:47 +0000 (14:22 +0800)]
team: Add vlan tx offload to hw_enc_features
[ Upstream commit
227f2f030e28d8783c3d10ce70ff4ba79cad653f ]
We should also enable team's vlan tx offload in hw_enc_features,
pass the vlan packets to the slave devices with vlan tci, let the
slave handle vlan tunneling offload implementation.
Fixes:
3268e5cb494d ("team: Advertise tunneling offload features")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maxim Mikityanskiy [Fri, 5 Jul 2019 14:59:28 +0000 (17:59 +0300)]
net/mlx5e: Use flow keys dissector to parse packets for ARFS
[ Upstream commit
405b93eb764367a670e729da18e54dc42db32620 ]
The current ARFS code relies on certain fields to be set in the SKB
(e.g. transport_header) and extracts IP addresses and ports by custom
code that parses the packet. The necessary SKB fields, however, are not
always set at that point, which leads to an out-of-bounds access. Use
skb_flow_dissect_flow_keys() to get the necessary information reliably,
fix the out-of-bounds access and reuse the code.
Fixes:
18c908e477dc ("net/mlx5e: Add accelerated RFS support")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Huy Nguyen [Thu, 1 Aug 2019 16:10:19 +0000 (11:10 -0500)]
net/mlx5e: Only support tx/rx pause setting for port owner
[ Upstream commit
466df6eb4a9e813b3cfc674363316450c57a89c5 ]
Only support changing tx/rx pause frame setting if the net device
is the vport group manager.
Fixes:
3c2d18ef22df ("net/mlx5e: Support ethtool get/set_pauseparam")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ross Lagerwall [Mon, 5 Aug 2019 15:34:34 +0000 (16:34 +0100)]
xen/netback: Reset nr_frags before freeing skb
[ Upstream commit
3a0233ddec554b886298de2428edb5c50a20e694 ]
At this point nr_frags has been incremented but the frag does not yet
have a page assigned so freeing the skb results in a crash. Reset
nr_frags before freeing the skb to prevent this.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Mon, 12 Aug 2019 12:49:12 +0000 (20:49 +0800)]
sctp: fix the transport error_count check
[ Upstream commit
a1794de8b92ea6bc2037f445b296814ac826693e ]
As the annotation says in sctp_do_8_2_transport_strike():
"If the transport error count is greater than the pf_retrans
threshold, and less than pathmaxrtx ..."
It should be transport->error_count checked with pathmaxrxt,
instead of asoc->pf_retrans.
Fixes:
5aa93bcf66f4 ("sctp: Implement quick failover draft from tsvwg")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Wed, 14 Aug 2019 09:11:57 +0000 (02:11 -0700)]
net/packet: fix race in tpacket_snd()
[ Upstream commit
32d3182cd2cd29b2e7e04df7b0db350fbe11289f ]
packet_sendmsg() checks tx_ring.pg_vec to decide
if it must call tpacket_snd().
Problem is that the check is lockless, meaning another thread
can issue a concurrent setsockopt(PACKET_TX_RING ) to flip
tx_ring.pg_vec back to NULL.
Given that tpacket_snd() grabs pg_vec_lock mutex, we can
perform the check again to solve the race.
syzbot reported :
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 11429 Comm: syz-executor394 Not tainted 5.3.0-rc4+ #101
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:packet_lookup_frame+0x8d/0x270 net/packet/af_packet.c:474
Code: c1 ee 03 f7 73 0c 80 3c 0e 00 0f 85 cb 01 00 00 48 8b 0b 89 c0 4c 8d 24 c1 48 b8 00 00 00 00 00 fc ff df 4c 89 e1 48 c1 e9 03 <80> 3c 01 00 0f 85 94 01 00 00 48 8d 7b 10 4d 8b 3c 24 48 b8 00 00
RSP: 0018:
ffff88809f82f7b8 EFLAGS:
00010246
RAX:
dffffc0000000000 RBX:
ffff8880a45c7030 RCX:
0000000000000000
RDX:
0000000000000000 RSI:
1ffff110148b8e06 RDI:
ffff8880a45c703c
RBP:
ffff88809f82f7e8 R08:
ffff888087aea200 R09:
fffffbfff134ae50
R10:
fffffbfff134ae4f R11:
ffffffff89a5727f R12:
0000000000000000
R13:
0000000000000001 R14:
ffff8880a45c6ac0 R15:
0000000000000000
FS:
00007fa04716f700(0000) GS:
ffff8880ae900000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fa04716edb8 CR3:
0000000091eb4000 CR4:
00000000001406e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
packet_current_frame net/packet/af_packet.c:487 [inline]
tpacket_snd net/packet/af_packet.c:2667 [inline]
packet_sendmsg+0x590/0x6250 net/packet/af_packet.c:2975
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:657
___sys_sendmsg+0x3e2/0x920 net/socket.c:2311
__sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413
__do_sys_sendmmsg net/socket.c:2442 [inline]
__se_sys_sendmmsg net/socket.c:2439 [inline]
__x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439
do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes:
69e3c75f4d54 ("net: TX_RING and packet mmap")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manish Chopra [Sun, 18 Aug 2019 14:25:48 +0000 (07:25 -0700)]
bnx2x: Fix VF's VLAN reconfiguration in reload.
[ Upstream commit
4a4d2d372fb9b9229327e2ed01d5d9572eddf4de ]
Commit
04f05230c5c13 ("bnx2x: Remove configured vlans as
part of unload sequence."), introduced a regression in driver
that as a part of VF's reload flow, VLANs created on the VF
doesn't get re-configured in hardware as vlan metadata/info
was not getting cleared for the VFs which causes vlan PING to stop.
This patch clears the vlan metadata/info so that VLANs gets
re-configured back in the hardware in VF's reload flow and
PING/traffic continues for VLANs created over the VFs.
Fixes:
04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence.")
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com>
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joerg Roedel [Fri, 5 Oct 2018 10:32:46 +0000 (12:32 +0200)]
iommu/amd: Move iommu_init_pci() to .init section
commit
24d2c521749d8547765b555b7a85cca179bb2275 upstream.
The function is only called from another __init function, so
it should be moved to .init too.
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YueHaibing [Tue, 16 Jul 2019 18:17:20 +0000 (20:17 +0200)]
Input: psmouse - fix build error of multiple definition
commit
49e6979e7e92cf496105b5636f1df0ac17c159c0 upstream.
trackpoint_detect() should be static inline while
CONFIG_MOUSE_PS2_TRACKPOINT is not set, otherwise, we build fails:
drivers/input/mouse/alps.o: In function `trackpoint_detect':
alps.c:(.text+0x8e00): multiple definition of `trackpoint_detect'
drivers/input/mouse/psmouse-base.o:psmouse-base.c:(.text+0x1b50): first defined here
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes:
55e3d9224b60 ("Input: psmouse - allow disabing certain protocol extensions")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dirk Morris [Thu, 8 Aug 2019 20:57:51 +0000 (13:57 -0700)]
netfilter: conntrack: Use consistent ct id hash calculation
commit
656c8e9cc1badbc18eefe6ba01d33ebbcae61b9a upstream.
Change ct id hash calculation to only use invariants.
Currently the ct id hash calculation is based on some fields that can
change in the lifetime on a conntrack entry in some corner cases. The
current hash uses the whole tuple which contains an hlist pointer which
will change when the conntrack is placed on the dying list resulting in
a ct id change.
This patch also removes the reply-side tuple and extension pointer from
the hash calculation so that the ct id will will not change from
initialization until confirmation.
Fixes:
3c79107631db1f7 ("netfilter: ctnetlink: don't use conntrack/expect object addresses as id")
Signed-off-by: Dirk Morris <dmorris@metaloft.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Mon, 29 Jul 2019 10:06:17 +0000 (11:06 +0100)]
arm64: compat: Allow single-byte watchpoints on all addresses
commit
849adec41203ac5837c40c2d7e08490ffdef3c2c upstream.
Commit
d968d2b801d8 ("ARM: 7497/1: hw_breakpoint: allow single-byte
watchpoints on all addresses") changed the validation requirements for
hardware watchpoints on arch/arm/. Update our compat layer to implement
the same relaxation.
Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Borkmann [Tue, 11 Dec 2018 11:14:12 +0000 (12:14 +0100)]
bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K
[ Upstream commit
fdadd04931c2d7cd294dc5b2b342863f94be53a3 ]
Michael and Sandipan report:
Commit
ede95a63b5 introduced a bpf_jit_limit tuneable to limit BPF
JIT allocations. At compile time it defaults to PAGE_SIZE * 40000,
and is adjusted again at init time if MODULES_VADDR is defined.
For ppc64 kernels, MODULES_VADDR isn't defined, so we're stuck with
the compile-time default at boot-time, which is 0x9c400000 when
using 64K page size. This overflows the signed 32-bit bpf_jit_limit
value:
root@ubuntu:/tmp# cat /proc/sys/net/core/bpf_jit_limit
-
1673527296
and can cause various unexpected failures throughout the network
stack. In one case `strace dhclient eth0` reported:
setsockopt(5, SOL_SOCKET, SO_ATTACH_FILTER, {len=11, filter=0x105dd27f8},
16) = -1 ENOTSUPP (Unknown error 524)
and similar failures can be seen with tools like tcpdump. This doesn't
always reproduce however, and I'm not sure why. The more consistent
failure I've seen is an Ubuntu 18.04 KVM guest booted on a POWER9
host would time out on systemd/netplan configuring a virtio-net NIC
with no noticeable errors in the logs.
Given this and also given that in near future some architectures like
arm64 will have a custom area for BPF JIT image allocations we should
get rid of the BPF_JIT_LIMIT_DEFAULT fallback / default entirely. For
4.21, we have an overridable bpf_jit_alloc_exec(), bpf_jit_free_exec()
so therefore add another overridable bpf_jit_alloc_exec_limit() helper
function which returns the possible size of the memory area for deriving
the default heuristic in bpf_jit_charge_init().
Like bpf_jit_alloc_exec() and bpf_jit_free_exec(), the new
bpf_jit_alloc_exec_limit() assumes that module_alloc() is the default
JIT memory provider, and therefore in case archs implement their custom
module_alloc() we use MODULES_{END,_VADDR} for limits and otherwise for
vmalloc_exec() cases like on ppc64 we use VMALLOC_{END,_START}.
Additionally, for archs supporting large page sizes, we should change
the sysctl to be handled as long to not run into sysctl restrictions
in future.
Fixes:
ede95a63b5e8 ("bpf: add bpf_jit_limit knob to restrict unpriv allocations")
Reported-by: Sandipan Das <sandipan@linux.ibm.com>
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Sat, 3 Aug 2019 04:49:19 +0000 (21:49 -0700)]
asm-generic: fix -Wtype-limits compiler warnings
[ Upstream commit
cbedfe11347fe418621bd188d58a206beb676218 ]
Commit
d66acc39c7ce ("bitops: Optimise get_order()") introduced a
compilation warning because "rx_frag_size" is an "ushort" while
PAGE_SHIFT here is 16.
The commit changed the get_order() to be a multi-line macro where
compilers insist to check all statements in the macro even when
__builtin_constant_p(rx_frag_size) will return false as "rx_frag_size"
is a module parameter.
In file included from ./arch/powerpc/include/asm/page_64.h:107,
from ./arch/powerpc/include/asm/page.h:242,
from ./arch/powerpc/include/asm/mmu.h:132,
from ./arch/powerpc/include/asm/lppaca.h:47,
from ./arch/powerpc/include/asm/paca.h:17,
from ./arch/powerpc/include/asm/current.h:13,
from ./include/linux/thread_info.h:21,
from ./arch/powerpc/include/asm/processor.h:39,
from ./include/linux/prefetch.h:15,
from drivers/net/ethernet/emulex/benet/be_main.c:14:
drivers/net/ethernet/emulex/benet/be_main.c: In function 'be_rx_cqs_create':
./include/asm-generic/getorder.h:54:9: warning: comparison is always
true due to limited range of data type [-Wtype-limits]
(((n) < (1UL << PAGE_SHIFT)) ? 0 : \
^
drivers/net/ethernet/emulex/benet/be_main.c:3138:33: note: in expansion
of macro 'get_order'
adapter->big_page_size = (1 << get_order(rx_frag_size)) * PAGE_SIZE;
^~~~~~~~~
Fix it by moving all of this multi-line macro into a proper function,
and killing __get_order() off.
[akpm@linux-foundation.org: remove __get_order() altogether]
[cai@lca.pw: v2]
Link: http://lkml.kernel.org/r/1564000166-31428-1-git-send-email-cai@lca.pw
Link: http://lkml.kernel.org/r/1563914986-26502-1-git-send-email-cai@lca.pw
Fixes:
d66acc39c7ce ("bitops: Optimise get_order()")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: James Y Knight <jyknight@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Thu, 15 Aug 2019 08:26:02 +0000 (01:26 -0700)]
USB: serial: option: Add Motorola modem UARTs
commit
6caf0be40a707689e8ff8824fdb96ef77685b1ba upstream.
On Motorola Mapphone devices such as Droid 4 there are five USB ports
that do not use the same layout as Gobi 1K/2K/etc devices listed in
qcserial.c. So we should use qcaux.c or option.c as noted by
Dan Williams <dan.j.williams@intel.com>.
As the Motorola USB serial ports have an interrupt endpoint as shown
with lsusb -v, we should use option.c instead of qcaux.c as pointed out
by Johan Hovold <johan@kernel.org>.
The ff/ff/ff interfaces seem to always be UARTs on Motorola devices.
For the other interfaces, class 0x0a (CDC Data) should not in general
be added as they are typically part of a multi-interface function as
noted earlier by Bjørn Mork <bjorn@mork.no>.
However, looking at the Motorola mapphone kernel code, the mdm6600 0x0a
class is only used for flashing the modem firmware, and there are no
other interfaces. So I've added that too with more details below as it
works just fine.
The ttyUSB ports on Droid 4 are:
ttyUSB0 DIAG, CQDM-capable
ttyUSB1 MUX or NMEA, no response
ttyUSB2 MUX or NMEA, no response
ttyUSB3 TCMD
ttyUSB4 AT-capable
The ttyUSB0 is detected as QCDM capable by ModemManager. I think
it's only used for debugging with ModemManager --debug for sending
custom AT commands though. ModemManager already can manage data
connection using the USB QMI ports that are already handled by the
qmi_wwan.c driver.
To enable the MUX or NMEA ports, it seems that something needs to be
done additionally to enable them, maybe via the DIAG or TCMD port.
It might be just a NVRAM setting somewhere, but I have no idea what
NVRAM settings may need changing for that.
The TCMD port seems to be a Motorola custom protocol for testing
the modem and to configure it's NVRAM and seems to work just fine
based on a quick test with a minimal tcmdrw tool I wrote.
The voice modem AT-capable port seems to provide only partial
support, and no PM support compared to the TS 27.010 based UART
wired directly to the modem.
The UARTs added with this change are the same product IDs as the
Motorola Mapphone Android Linux kernel mdm6600_id_table. I don't
have any mdm9600 based devices, so I have only tested these on
mdm6600 based droid 4.
Then for the class 0x0a (CDC Data) mode, the Motorola Mapphone Android
Linux kernel driver moto_flashqsc.c just seems to change the
port->bulk_out_size to 8K from the default. And is only used for
flashing the modem firmware it seems.
I've verified that flashing the modem with signed firmware works just
fine with the option driver after manually toggling the GPIO pins, so
I've added droid 4 modem flashing mode to the option driver. I've not
added the other devices listed in moto_flashqsc.c in case they really
need different port->bulk_out_size. Those can be added as they get
tested to work for flashing the modem.
After this patch the output of /sys/kernel/debug/usb/devices has
the following for normal 22b8:2a70 mode including the related qmi_wwan
interfaces:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=22b8 ProdID=2a70 Rev= 0.00
S: Manufacturer=Motorola, Incorporated
S: Product=Flash MZ600
C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=84(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=5ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=05(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=5ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=5ms
E: Ad=8a(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
E: Ad=8b(I) Atr=03(Int.) MxPS= 64 Ivl=5ms
E: Ad=8c(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=08(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fb Prot=ff Driver=qmi_wwan
E: Ad=8d(I) Atr=03(Int.) MxPS= 64 Ivl=5ms
E: Ad=8e(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=09(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
In 22b8:900e "qc_dload" mode the device shows up as:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=22b8 ProdID=900e Rev= 0.00
S: Manufacturer=Motorola, Incorporated
S: Product=Flash MZ600
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
And in 22b8:4281 "ram_downloader" mode the device shows up as:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=22b8 ProdID=4281 Rev= 0.00
S: Manufacturer=Motorola, Incorporated
S: Product=Flash MZ600
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=fc Driver=option
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
Cc: Bjørn Mork <bjorn@mork.no>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Lars Melin <larsm17@gmail.com>
Cc: Marcel Partap <mpartap@gmx.net>
Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Michael Scott <hashcode0f@gmail.com>
Cc: NeKit <nekit1000@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bob Ham [Wed, 24 Jul 2019 14:52:26 +0000 (07:52 -0700)]
USB: serial: option: add the BroadMobi BM818 card
commit
e5d8badf37e6b547842f2fcde10361b29e08bd36 upstream.
Add a VID:PID for the BroadMobi BM818 M.2 card
T: Bus=01 Lev=03 Prnt=40 Port=03 Cnt=01 Dev#= 44 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2020 ProdID=2060 Rev=00.00
S: Manufacturer=Qualcomm, Incorporated
S: Product=Qualcomm CDMA Technologies MSM
C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=(none)
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
Signed-off-by: Bob Ham <bob.ham@puri.sm>
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Cc: stable <stable@vger.kernel.org>
[ johan: use USB_DEVICE_INTERFACE_CLASS() ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yoshiaki Okamoto [Sat, 20 Jul 2019 13:23:18 +0000 (22:23 +0900)]
USB: serial: option: Add support for ZTE MF871A
commit
7e7ae38bf928c5cfa6dd6e9a2cf8b42c84a27c92 upstream.
This patch adds support for MF871A USB modem (aka Speed USB STICK U03)
to option driver. This modem is manufactured by ZTE corporation, and
sold by KDDI.
Interface layout:
0: AT
1: MODEM
usb-devices output:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=19d2 ProdID=1481 Rev=52.87
S: Manufacturer=ZTE,Incorporated
S: Product=ZTE Technologies MSM
S: SerialNumber=
1234567890ABCDEF
C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
Co-developed-by: Hiroyuki Yamamoto <hyamamo@allied-telesis.co.jp>
Signed-off-by: Hiroyuki Yamamoto <hyamamo@allied-telesis.co.jp>
Signed-off-by: Yoshiaki Okamoto <yokamoto@allied-telesis.co.jp>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rogan Dawes [Wed, 17 Jul 2019 09:11:34 +0000 (11:11 +0200)]
USB: serial: option: add D-Link DWM-222 device ID
commit
552573e42aab5f75aff9bab855a9677979d9a7d5 upstream.
Add device id for D-Link DWM-222 A2.
MI_00 D-Link HS-USB Diagnostics
MI_01 D-Link HS-USB Modem
MI_02 D-Link HS-USB AT Port
MI_03 D-Link HS-USB NMEA
MI_04 D-Link HS-USB WWAN Adapter (qmi_wwan)
MI_05 USB Mass Storage Device
Cc: stable@vger.kernel.org
Signed-off-by: Rogan Dawes <rogan@dawes.za.net>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Neukum [Tue, 13 Aug 2019 09:35:41 +0000 (11:35 +0200)]
USB: CDC: fix sanity checks in CDC union parser
commit
54364278fb3cabdea51d6398b07c87415065b3fc upstream.
A few checks checked for the size of the pointer to a structure
instead of the structure itself. Copy & paste issue presumably.
Fixes:
e4c6fb7794982 ("usbnet: move the CDC parser into USB core")
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot+45a53506b65321c1fe91@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20190813093541.18889-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Neukum [Thu, 8 Aug 2019 14:21:19 +0000 (16:21 +0200)]
usb: cdc-acm: make sure a refcount is taken early enough
commit
c52873e5a1ef72f845526d9f6a50704433f9c625 upstream.
destroy() will decrement the refcount on the interface, so that
it needs to be taken so early that it never undercounts.
Fixes:
7fb57a019f94e ("USB: cdc-acm: Fix potential deadlock (lockdep warning)")
Cc: stable <stable@vger.kernel.org>
Reported-and-tested-by: syzbot+1b2449b7b5dc240d107a@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20190808142119.7998-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Stern [Mon, 12 Aug 2019 20:11:07 +0000 (16:11 -0400)]
USB: core: Fix races in character device registration and deregistraion
commit
303911cfc5b95d33687d9046133ff184cf5043ff upstream.
The syzbot fuzzer has found two (!) races in the USB character device
registration and deregistration routines. This patch fixes the races.
The first race results from the fact that usb_deregister_dev() sets
usb_minors[intf->minor] to NULL before calling device_destroy() on the
class device. This leaves a window during which another thread can
allocate the same minor number but will encounter a duplicate name
error when it tries to register its own class device. A typical error
message in the system log would look like:
sysfs: cannot create duplicate filename '/class/usbmisc/ldusb0'
The patch fixes this race by destroying the class device first.
The second race is in usb_register_dev(). When that routine runs, it
first allocates a minor number, then drops minor_rwsem, and then
creates the class device. If the device creation fails, the minor
number is deallocated and the whole routine returns an error. But
during the time while minor_rwsem was dropped, there is a window in
which the minor number is allocated and so another thread can
successfully open the device file. Typically this results in
use-after-free errors or invalid accesses when the other thread closes
its open file reference, because the kernel then tries to release
resources that were already deallocated when usb_register_dev()
failed. The patch fixes this race by keeping minor_rwsem locked
throughout the entire routine.
Reported-and-tested-by: syzbot+30cf45ebfe0b0c4847a1@syzkaller.appspotmail.com
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1908121607590.1659-100000@iolanthe.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 12 Aug 2019 12:08:14 +0000 (13:08 +0100)]
staging: comedi: dt3000: Fix rounding up of timer divisor
commit
8e2a589a3fc36ce858d42e767c3bcd8fc62a512b upstream.
`dt3k_ns_to_timer()` determines the prescaler and divisor to use to
produce a desired timing period. It is influenced by a rounding mode
and can round the divisor up, down, or to the nearest value. However,
the code for rounding up currently does the same as rounding down! Fix
ir by using the `DIV_ROUND_UP()` macro to calculate the divisor when
rounding up.
Also, change the types of the `divider`, `base` and `prescale` variables
from `int` to `unsigned int` to avoid mixing signed and unsigned types
in the calculations.
Also fix a typo in a nearby comment: "improvment" => "improvement".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190812120814.21188-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 12 Aug 2019 11:15:17 +0000 (12:15 +0100)]
staging: comedi: dt3000: Fix signed integer overflow 'divider * base'
commit
b4d98bc3fc93ec3a58459948a2c0e0c9b501cd88 upstream.
In `dt3k_ns_to_timer()` the following lines near the end of the function
result in a signed integer overflow:
prescale = 15;
base = timer_base * (1 << prescale);
divider = 65535;
*nanosec = divider * base;
(`divider`, `base` and `prescale` are type `int`, `timer_base` and
`*nanosec` are type `unsigned int`. The value of `timer_base` will be
either 50 or 100.)
The main reason for the overflow is that the calculation for `base` is
completely wrong. It should be:
base = timer_base * (prescale + 1);
which matches an earlier instance of this calculation in the same
function.
Reported-by: David Binderman <dcb314@hotmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20190812111517.26803-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YueHaibing [Sat, 3 Aug 2019 04:48:40 +0000 (21:48 -0700)]
ocfs2: remove set but not used variable 'last_hash'
[ Upstream commit
7bc36e3ce91471b6377c8eadc0a2f220a2280083 ]
Fixes gcc '-Wunused-but-set-variable' warning:
fs/ocfs2/xattr.c: In function ocfs2_xattr_bucket_find:
fs/ocfs2/xattr.c:3828:6: warning: variable last_hash set but not used [-Wunused-but-set-variable]
It's never used and can be removed.
Link: http://lkml.kernel.org/r/20190716132110.34836-1-yuehaibing@huawei.com
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jack Morgenstein [Thu, 1 Aug 2019 12:14:49 +0000 (15:14 +0300)]
IB/mad: Fix use-after-free in ib mad completion handling
[ Upstream commit
770b7d96cfff6a8bf6c9f261ba6f135dc9edf484 ]
We encountered a use-after-free bug when unloading the driver:
[ 3562.116059] BUG: KASAN: use-after-free in ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.117233] Read of size 4 at addr
ffff8882ca5aa868 by task kworker/u13:2/23862
[ 3562.118385]
[ 3562.119519] CPU: 2 PID: 23862 Comm: kworker/u13:2 Tainted: G OE 5.1.0-for-upstream-dbg-2019-05-19_16-44-30-13 #1
[ 3562.121806] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[ 3562.123075] Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
[ 3562.124383] Call Trace:
[ 3562.125640] dump_stack+0x9a/0xeb
[ 3562.126911] print_address_description+0xe3/0x2e0
[ 3562.128223] ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.129545] __kasan_report+0x15c/0x1df
[ 3562.130866] ? ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.132174] kasan_report+0xe/0x20
[ 3562.133514] ib_mad_post_receive_mads+0xddc/0xed0 [ib_core]
[ 3562.134835] ? find_mad_agent+0xa00/0xa00 [ib_core]
[ 3562.136158] ? qlist_free_all+0x51/0xb0
[ 3562.137498] ? mlx4_ib_sqp_comp_worker+0x1970/0x1970 [mlx4_ib]
[ 3562.138833] ? quarantine_reduce+0x1fa/0x270
[ 3562.140171] ? kasan_unpoison_shadow+0x30/0x40
[ 3562.141522] ib_mad_recv_done+0xdf6/0x3000 [ib_core]
[ 3562.142880] ? _raw_spin_unlock_irqrestore+0x46/0x70
[ 3562.144277] ? ib_mad_send_done+0x1810/0x1810 [ib_core]
[ 3562.145649] ? mlx4_ib_destroy_cq+0x2a0/0x2a0 [mlx4_ib]
[ 3562.147008] ? _raw_spin_unlock_irqrestore+0x46/0x70
[ 3562.148380] ? debug_object_deactivate+0x2b9/0x4a0
[ 3562.149814] __ib_process_cq+0xe2/0x1d0 [ib_core]
[ 3562.151195] ib_cq_poll_work+0x45/0xf0 [ib_core]
[ 3562.152577] process_one_work+0x90c/0x1860
[ 3562.153959] ? pwq_dec_nr_in_flight+0x320/0x320
[ 3562.155320] worker_thread+0x87/0xbb0
[ 3562.156687] ? __kthread_parkme+0xb6/0x180
[ 3562.158058] ? process_one_work+0x1860/0x1860
[ 3562.159429] kthread+0x320/0x3e0
[ 3562.161391] ? kthread_park+0x120/0x120
[ 3562.162744] ret_from_fork+0x24/0x30
...
[ 3562.187615] Freed by task 31682:
[ 3562.188602] save_stack+0x19/0x80
[ 3562.189586] __kasan_slab_free+0x11d/0x160
[ 3562.190571] kfree+0xf5/0x2f0
[ 3562.191552] ib_mad_port_close+0x200/0x380 [ib_core]
[ 3562.192538] ib_mad_remove_device+0xf0/0x230 [ib_core]
[ 3562.193538] remove_client_context+0xa6/0xe0 [ib_core]
[ 3562.194514] disable_device+0x14e/0x260 [ib_core]
[ 3562.195488] __ib_unregister_device+0x79/0x150 [ib_core]
[ 3562.196462] ib_unregister_device+0x21/0x30 [ib_core]
[ 3562.197439] mlx4_ib_remove+0x162/0x690 [mlx4_ib]
[ 3562.198408] mlx4_remove_device+0x204/0x2c0 [mlx4_core]
[ 3562.199381] mlx4_unregister_interface+0x49/0x1d0 [mlx4_core]
[ 3562.200356] mlx4_ib_cleanup+0xc/0x1d [mlx4_ib]
[ 3562.201329] __x64_sys_delete_module+0x2d2/0x400
[ 3562.202288] do_syscall_64+0x95/0x470
[ 3562.203277] entry_SYSCALL_64_after_hwframe+0x49/0xbe
The problem was that the MAD PD was deallocated before the MAD CQ.
There was completion work pending for the CQ when the PD got deallocated.
When the mad completion handling reached procedure
ib_mad_post_receive_mads(), we got a use-after-free bug in the following
line of code in that procedure:
sg_list.lkey = qp_info->port_priv->pd->local_dma_lkey;
(the pd pointer in the above line is no longer valid, because the
pd has been deallocated).
We fix this by allocating the PD before the CQ in procedure
ib_mad_port_open(), and deallocating the PD after freeing the CQ
in procedure ib_mad_port_close().
Since the CQ completion work queue is flushed during ib_free_cq(),
no completions will be pending for that CQ when the PD is later
deallocated.
Note that freeing the CQ before deallocating the PD is the practice
in the ULPs.
Fixes:
4be90bc60df4 ("IB/mad: Remove ib_get_dma_mr calls")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190801121449.24973-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luck, Tony [Wed, 31 Jul 2019 04:39:57 +0000 (21:39 -0700)]
IB/core: Add mitigation for Spectre V1
[ Upstream commit
61f259821dd3306e49b7d42a3f90fb5a4ff3351b ]
Some processors may mispredict an array bounds check and
speculatively access memory that they should not. With
a user supplied array index we like to play things safe
by masking the value with the array size before it is
used as an index.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20190731043957.GA1600@agluck-desk2.amr.corp.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Wed, 31 Jul 2019 20:05:45 +0000 (16:05 -0400)]
arm64/mm: fix variable 'pud' set but not used
[ Upstream commit
7d4e2dcf311d3b98421d1f119efe5964cafa32fc ]
GCC throws a warning,
arch/arm64/mm/mmu.c: In function 'pud_free_pmd_page':
arch/arm64/mm/mmu.c:1033:8: warning: variable 'pud' set but not used
[-Wunused-but-set-variable]
pud_t pud;
^~~
because pud_table() is a macro and compiled away. Fix it by making it a
static inline function and for pud_sect() as well.
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qian Cai [Tue, 30 Jul 2019 21:23:48 +0000 (17:23 -0400)]
arm64/efi: fix variable 'si' set but not used
[ Upstream commit
f1d4836201543e88ebe70237e67938168d5fab19 ]
GCC throws out this warning on arm64.
drivers/firmware/efi/libstub/arm-stub.c: In function 'efi_entry':
drivers/firmware/efi/libstub/arm-stub.c:132:22: warning: variable 'si'
set but not used [-Wunused-but-set-variable]
Fix it by making free_screen_info() a static inline function.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masahiro Yamada [Tue, 30 Jul 2019 15:59:00 +0000 (00:59 +0900)]
kbuild: modpost: handle KBUILD_EXTRA_SYMBOLS only for external modules
[ Upstream commit
cb4819934a7f9b87876f11ed05b8624c0114551b ]
KBUILD_EXTRA_SYMBOLS makes sense only when building external modules.
Moreover, the modpost sets 'external_module' if the -e option is given.
I replaced $(patsubst %, -e %,...) with simpler $(addprefix -e,...)
while I was here.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miquel Raynal [Wed, 31 Jul 2019 12:26:51 +0000 (14:26 +0200)]
ata: libahci: do not complain in case of deferred probe
[ Upstream commit
090bb803708198e5ab6b0046398c7ed9f4d12d6b ]
Retrieving PHYs can defer the probe, do not spawn an error when
-EPROBE_DEFER is returned, it is normal behavior.
Fixes:
b1a9edbda040 ("ata: libahci: allow to use multiple PHYs")
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Don Brace [Wed, 24 Jul 2019 22:08:06 +0000 (17:08 -0500)]
scsi: hpsa: correct scsi command status issue after reset
[ Upstream commit
eeebce1862970653cdf5c01e98bc669edd8f529a ]
Reviewed-by: Bader Ali - Saleh <bader.alisaleh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kees Cook [Mon, 29 Jul 2019 21:47:22 +0000 (14:47 -0700)]
libata: zpodd: Fix small read overflow in zpodd_get_mech_type()
[ Upstream commit
71d6c505b4d9e6f76586350450e785e3d452b346 ]
Jeffrin reported a KASAN issue:
BUG: KASAN: global-out-of-bounds in ata_exec_internal_sg+0x50f/0xc70
Read of size 16 at addr
ffffffff91f41f80 by task scsi_eh_1/149
...
The buggy address belongs to the variable:
cdb.48319+0x0/0x40
Much like commit
18c9a99bce2a ("libata: zpodd: small read overflow in
eject_tray()"), this fixes a cdb[] buffer length, this time in
zpodd_get_mech_type():
We read from the cdb[] buffer in ata_exec_internal_sg(). It has to be
ATAPI_CDB_LEN (16) bytes long, but this buffer is only 12 bytes.
Reported-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Fixes:
afe759511808c ("libata: identify and init ZPODD devices")
Link: https://lore.kernel.org/lkml/201907181423.E808958@keescook/
Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Numfor Mbiziwo-Tiapo [Wed, 24 Jul 2019 23:44:58 +0000 (16:44 -0700)]
perf header: Fix use of unitialized value warning
[ Upstream commit
20f9781f491360e7459c589705a2e4b1f136bee9 ]
When building our local version of perf with MSAN (Memory Sanitizer) and
running the perf record command, MSAN throws a use of uninitialized
value warning in "tools/perf/util/util.c:333:6".
This warning stems from the "buf" variable being passed into "write".
It originated as the variable "ev" with the type union perf_event*
defined in the "perf_event__synthesize_attr" function in
"tools/perf/util/header.c".
In the "perf_event__synthesize_attr" function they allocate space with a malloc
call using ev, then go on to only assign some of the member variables before
passing "ev" on as a parameter to the "process" function therefore "ev"
contains uninitialized memory. Changing the malloc call to zalloc to initialize
all the members of "ev" which gets rid of the warning.
To reproduce this warning, build perf by running:
make -C tools/perf CLANG=1 CC=clang EXTRA_CFLAGS="-fsanitize=memory\
-fsanitize-memory-track-origins"
(Additionally, llvm might have to be installed and clang might have to
be specified as the compiler - export CC=/usr/bin/clang)
then running:
tools/perf/perf record -o - ls / | tools/perf/perf --no-pager annotate\
-i - --stdio
Please see the cover letter for why false positive warnings may be
generated.
Signed-off-by: Numfor Mbiziwo-Tiapo <nums@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Drayton <mbd@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190724234500.253358-2-nums@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vince Weaver [Tue, 23 Jul 2019 15:06:01 +0000 (11:06 -0400)]
perf header: Fix divide by zero error if f_header.attr_size==0
[ Upstream commit
7622236ceb167aa3857395f9bdaf871442aa467e ]
So I have been having lots of trouble with hand-crafted perf.data files
causing segfaults and the like, so I have started fuzzing the perf tool.
First issue found:
If f_header.attr_size is 0 in the perf.data file, then perf will crash
with a divide-by-zero error.
Committer note:
Added a pr_err() to tell the user why the command failed.
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1907231100440.14532@macbook-air
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lucas Stach [Fri, 12 Jul 2019 13:29:05 +0000 (15:29 +0200)]
irqchip/irq-imx-gpcv2: Forward irq type to parent
[ Upstream commit
9a446ef08f3bfc0c3deb9c6be840af2528ef8cf8 ]
The GPCv2 is a stacked IRQ controller below the ARM GIC. It doesn't
care about the IRQ type itself, but needs to forward the type to the
parent IRQ controller, so this one can be configured correctly.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
YueHaibing [Wed, 24 Jul 2019 14:08:50 +0000 (22:08 +0800)]
xen/pciback: remove set but not used variable 'old_state'
[ Upstream commit
09e088a4903bd0dd911b4f1732b250130cdaffed ]
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/xen/xen-pciback/conf_space_capability.c: In function pm_ctrl_write:
drivers/xen/xen-pciback/conf_space_capability.c:119:25: warning:
variable old_state set but not used [-Wunused-but-set-variable]
It is never used so can be removed.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Denis Kirjanov [Tue, 30 Jul 2019 13:13:57 +0000 (15:13 +0200)]
net: usb: pegasus: fix improper read if get_registers() fail
commit
224c04973db1125fcebefffd86115f99f50f8277 upstream.
get_registers() may fail with -ENOMEM and in this
case we can read a garbage from the status variable tmp.
Reported-by: syzbot+3499a83b2d062ae409d4@syzkaller.appspotmail.com
Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Neukum [Tue, 6 Aug 2019 16:05:55 +0000 (09:05 -0700)]
Input: iforce - add sanity checks
commit
849f5ae3a513c550cad741c68dd3d7eb2bcc2a2c upstream.
The endpoint type should also be checked before a device
is accepted.
Reported-by: syzbot+5efc10c005014d061a74@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Neukum [Thu, 1 Aug 2019 16:44:25 +0000 (09:44 -0700)]
Input: kbtab - sanity check for endpoint type
commit
c88090dfc84254fa149174eb3e6a8458de1912c4 upstream.
The driver should check whether the endpoint it uses has the correct
type.
Reported-by: syzbot+c7df50363aaff50aa363@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hillf Danton [Tue, 6 Aug 2019 08:40:15 +0000 (16:40 +0800)]
HID: hiddev: do cleanup in failure of opening a device
commit
6d4472d7bec39917b54e4e80245784ea5d60ce49 upstream.
Undo what we did for opening before releasing the memory slice.
Reported-by: syzbot <syzbot+62a1e04fd3ec2abf099e@syzkaller.appspotmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hillf Danton [Tue, 6 Aug 2019 08:38:58 +0000 (16:38 +0800)]
HID: hiddev: avoid opening a disconnected device
commit
9c09b214f30e3c11f9b0b03f89442df03643794d upstream.
syzbot found the following crash on:
HEAD commit:
e96407b4 usb-fuzzer: main usb gadget fuzzer driver
git tree: https://github.com/google/kasan.git usb-fuzzer
console output: https://syzkaller.appspot.com/x/log.txt?x=
147ac20c600000
kernel config: https://syzkaller.appspot.com/x/.config?x=
792eb47789f57810
link: https://syzkaller.appspot.com/bug?extid=62a1e04fd3ec2abf099e
compiler: gcc (GCC) 9.0.0
20181231 (experimental)
==================================================================
BUG: KASAN: use-after-free in __lock_acquire+0x302a/0x3b50
kernel/locking/lockdep.c:3753
Read of size 8 at addr
ffff8881cf591a08 by task syz-executor.1/26260
CPU: 1 PID: 26260 Comm: syz-executor.1 Not tainted 5.3.0-rc2+ #24
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xca/0x13e lib/dump_stack.c:113
print_address_description+0x6a/0x32c mm/kasan/report.c:351
__kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482
kasan_report+0xe/0x12 mm/kasan/common.c:612
__lock_acquire+0x302a/0x3b50 kernel/locking/lockdep.c:3753
lock_acquire+0x127/0x320 kernel/locking/lockdep.c:4412
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0x32/0x50 kernel/locking/spinlock.c:159
hiddev_release+0x82/0x520 drivers/hid/usbhid/hiddev.c:221
__fput+0x2d7/0x840 fs/file_table.c:280
task_work_run+0x13f/0x1c0 kernel/task_work.c:113
exit_task_work include/linux/task_work.h:22 [inline]
do_exit+0x8ef/0x2c50 kernel/exit.c:878
do_group_exit+0x125/0x340 kernel/exit.c:982
get_signal+0x466/0x23d0 kernel/signal.c:2728
do_signal+0x88/0x14e0 arch/x86/kernel/signal.c:815
exit_to_usermode_loop+0x1a2/0x200 arch/x86/entry/common.c:159
prepare_exit_to_usermode arch/x86/entry/common.c:194 [inline]
syscall_return_slowpath arch/x86/entry/common.c:274 [inline]
do_syscall_64+0x45f/0x580 arch/x86/entry/common.c:299
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x459829
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007f75b2a6ccf8 EFLAGS:
00000246 ORIG_RAX:
00000000000000ca
RAX:
fffffffffffffe00 RBX:
000000000075c078 RCX:
0000000000459829
RDX:
0000000000000000 RSI:
0000000000000080 RDI:
000000000075c078
RBP:
000000000075c070 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
000000000075c07c
R13:
00007ffcdfe1023f R14:
00007f75b2a6d9c0 R15:
000000000075c07c
Allocated by task 104:
save_stack+0x1b/0x80 mm/kasan/common.c:69
set_track mm/kasan/common.c:77 [inline]
__kasan_kmalloc mm/kasan/common.c:487 [inline]
__kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:460
kmalloc include/linux/slab.h:552 [inline]
kzalloc include/linux/slab.h:748 [inline]
hiddev_connect+0x242/0x5b0 drivers/hid/usbhid/hiddev.c:900
hid_connect+0x239/0xbb0 drivers/hid/hid-core.c:1882
hid_hw_start drivers/hid/hid-core.c:1981 [inline]
hid_hw_start+0xa2/0x130 drivers/hid/hid-core.c:1972
appleir_probe+0x13e/0x1a0 drivers/hid/hid-appleir.c:308
hid_device_probe+0x2be/0x3f0 drivers/hid/hid-core.c:2209
really_probe+0x281/0x650 drivers/base/dd.c:548
driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
__device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
__device_attach+0x217/0x360 drivers/base/dd.c:882
bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
device_add+0xae6/0x16f0 drivers/base/core.c:2114
hid_add_device+0x33c/0x990 drivers/hid/hid-core.c:2365
usbhid_probe+0xa81/0xfa0 drivers/hid/usbhid/hid-core.c:1386
usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
really_probe+0x281/0x650 drivers/base/dd.c:548
driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
__device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
__device_attach+0x217/0x360 drivers/base/dd.c:882
bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
device_add+0xae6/0x16f0 drivers/base/core.c:2114
usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023
generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210
usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266
really_probe+0x281/0x650 drivers/base/dd.c:548
driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
__device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
__device_attach+0x217/0x360 drivers/base/dd.c:882
bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
device_add+0xae6/0x16f0 drivers/base/core.c:2114
usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536
hub_port_connect drivers/usb/core/hub.c:5098 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5213 [inline]
port_event drivers/usb/core/hub.c:5359 [inline]
hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441
process_one_work+0x92b/0x1530 kernel/workqueue.c:2269
worker_thread+0x96/0xe20 kernel/workqueue.c:2415
kthread+0x318/0x420 kernel/kthread.c:255
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
Freed by task 104:
save_stack+0x1b/0x80 mm/kasan/common.c:69
set_track mm/kasan/common.c:77 [inline]
__kasan_slab_free+0x130/0x180 mm/kasan/common.c:449
slab_free_hook mm/slub.c:1423 [inline]
slab_free_freelist_hook mm/slub.c:1470 [inline]
slab_free mm/slub.c:3012 [inline]
kfree+0xe4/0x2f0 mm/slub.c:3953
hiddev_connect.cold+0x45/0x5c drivers/hid/usbhid/hiddev.c:914
hid_connect+0x239/0xbb0 drivers/hid/hid-core.c:1882
hid_hw_start drivers/hid/hid-core.c:1981 [inline]
hid_hw_start+0xa2/0x130 drivers/hid/hid-core.c:1972
appleir_probe+0x13e/0x1a0 drivers/hid/hid-appleir.c:308
hid_device_probe+0x2be/0x3f0 drivers/hid/hid-core.c:2209
really_probe+0x281/0x650 drivers/base/dd.c:548
driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
__device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
__device_attach+0x217/0x360 drivers/base/dd.c:882
bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
device_add+0xae6/0x16f0 drivers/base/core.c:2114
hid_add_device+0x33c/0x990 drivers/hid/hid-core.c:2365
usbhid_probe+0xa81/0xfa0 drivers/hid/usbhid/hid-core.c:1386
usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361
really_probe+0x281/0x650 drivers/base/dd.c:548
driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
__device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
__device_attach+0x217/0x360 drivers/base/dd.c:882
bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
device_add+0xae6/0x16f0 drivers/base/core.c:2114
usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023
generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210
usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266
really_probe+0x281/0x650 drivers/base/dd.c:548
driver_probe_device+0x101/0x1b0 drivers/base/dd.c:709
__device_attach_driver+0x1c2/0x220 drivers/base/dd.c:816
bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454
__device_attach+0x217/0x360 drivers/base/dd.c:882
bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514
device_add+0xae6/0x16f0 drivers/base/core.c:2114
usb_new_device.cold+0x6a4/0xe79 drivers/usb/core/hub.c:2536
hub_port_connect drivers/usb/core/hub.c:5098 [inline]
hub_port_connect_change drivers/usb/core/hub.c:5213 [inline]
port_event drivers/usb/core/hub.c:5359 [inline]
hub_event+0x1b5c/0x3640 drivers/usb/core/hub.c:5441
process_one_work+0x92b/0x1530 kernel/workqueue.c:2269
worker_thread+0x96/0xe20 kernel/workqueue.c:2415
kthread+0x318/0x420 kernel/kthread.c:255
ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352
The buggy address belongs to the object at
ffff8881cf591900
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 264 bytes inside of
512-byte region [
ffff8881cf591900,
ffff8881cf591b00)
The buggy address belongs to the page:
page:
ffffea00073d6400 refcount:1 mapcount:0 mapping:
ffff8881da002500
index:0x0 compound_mapcount: 0
flags: 0x200000000010200(slab|head)
raw:
0200000000010200 0000000000000000 0000000100000001 ffff8881da002500
raw:
0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881cf591900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881cf591980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>
ffff8881cf591a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881cf591a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881cf591b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
In order to avoid opening a disconnected device, we need to check exist
again after acquiring the existance lock, and bail out if necessary.
Reported-by: syzbot <syzbot+62a1e04fd3ec2abf099e@syzkaller.appspotmail.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Neukum [Thu, 25 Jul 2019 13:13:33 +0000 (15:13 +0200)]
HID: holtek: test for sanity of intfdata
commit
01ec0a5f19c8c82960a07f6c7410fc9e01d7fb51 upstream.
The ioctl handler uses the intfdata of a second interface,
which may not be present in a broken or malicious device, hence
the intfdata needs to be checked for NULL.
[jkosina@suse.cz: fix newly added spurious space]
Reported-by: syzbot+965152643a75a56737be@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hui Wang [Wed, 14 Aug 2019 04:09:07 +0000 (12:09 +0800)]
ALSA: hda - Let all conexant codec enter D3 when rebooting
commit
401714d9534aad8c24196b32600da683116bbe09 upstream.
We have 3 new lenovo laptops which have conexant codec 0x14f11f86,
these 3 laptops also have the noise issue when rebooting, after
letting the codec enter D3 before rebooting or poweroff, the noise
disappers.
Instead of adding a new ID again in the reboot_notify(), let us make
this function apply to all conexant codec. In theory make codec enter
D3 before rebooting or poweroff is harmless, and I tested this change
on a couple of other Lenovo laptops which have different conexant
codecs, there is no side effect so far.
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hui Wang [Wed, 14 Aug 2019 04:09:08 +0000 (12:09 +0800)]
ALSA: hda - Add a generic reboot_notify
commit
871b9066027702e6e6589da0e1edd3b7dede7205 upstream.
Make codec enter D3 before rebooting or poweroff can fix the noise
issue on some laptops. And in theory it is harmless for all codecs
to enter D3 before rebooting or poweroff, let us add a generic
reboot_notify, then realtek and conexant drivers can call this
function.
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wenwen Wang [Sat, 10 Aug 2019 04:29:48 +0000 (23:29 -0500)]
ALSA: hda - Fix a memory leak bug
commit
cfef67f016e4c00a2f423256fc678a6967a9fc09 upstream.
In snd_hda_parse_generic_codec(), 'spec' is allocated through kzalloc().
Then, the pin widgets in 'codec' are parsed. However, if the parsing
process fails, 'spec' is not deallocated, leading to a memory leak.
To fix the above issue, free 'spec' before returning the error.
Fixes:
352f7f914ebb ("ALSA: hda - Merge Realtek parser code to generic parser")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Max Filippov [Mon, 12 Aug 2019 22:01:30 +0000 (15:01 -0700)]
xtensa: add missing isync to the cpu_reset TLB code
commit
cd8869f4cb257f22b89495ca40f5281e58ba359c upstream.
ITLB entry modifications must be followed by the isync instruction
before the new entries are possibly used. cpu_reset lacks one isync
between ITLB way 6 initialization and jump to the identity mapping.
Add missing isync to xtensa cpu_reset.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Westphal [Fri, 16 Aug 2019 23:01:34 +0000 (00:01 +0100)]
netfilter: ctnetlink: don't use conntrack/expect object addresses as id
commit
3c79107631db1f7fd32cf3f7368e4672004a3010 upstream.
else, we leak the addresses to userspace via ctnetlink events
and dumps.
Compute an ID on demand based on the immutable parts of nf_conn struct.
Another advantage compared to using an address is that there is no
immediate re-use of the same ID in case the conntrack entry is freed and
reallocated again immediately.
Fixes:
3583240249ef ("[NETFILTER]: nf_conntrack_expect: kill unique ID")
Fixes:
7f85f914721f ("[NETFILTER]: nf_conntrack: kill unique ID")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Fri, 16 Aug 2019 23:01:27 +0000 (00:01 +0100)]
inet: switch IP ID generator to siphash
commit
df453700e8d81b1bdafdf684365ee2b9431fb702 upstream.
According to Amit Klein and Benny Pinkas, IP ID generation is too weak
and might be used by attackers.
Even with recent net_hash_mix() fix (netns: provide pure entropy for net_hash_mix())
having 64bit key and Jenkins hash is risky.
It is time to switch to siphash and its 128bit keys.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Amit Klein <aksecurity@gmail.com>
Reported-by: Benny Pinkas <benny@pinkas.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 4.9: adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason A. Donenfeld [Fri, 16 Aug 2019 23:01:19 +0000 (00:01 +0100)]
siphash: implement HalfSipHash1-3 for hash tables
commit
1ae2324f732c9c4e2fa4ebd885fa1001b70d52e1 upstream.
HalfSipHash, or hsiphash, is a shortened version of SipHash, which
generates 32-bit outputs using a weaker 64-bit key. It has *much* lower
security margins, and shouldn't be used for anything too sensitive, but
it could be used as a hashtable key function replacement, if the output
is never exposed, and if the security requirement is not too high.
The goal is to make this something that performance-critical jhash users
would be willing to use.
On 64-bit machines, HalfSipHash1-3 is slower than SipHash1-3, so we alias
SipHash1-3 to HalfSipHash1-3 on those systems.
64-bit x86_64:
[ 0.509409] test_siphash: SipHash2-4 cycles:
4049181
[ 0.510650] test_siphash: SipHash1-3 cycles:
2512884
[ 0.512205] test_siphash: HalfSipHash1-3 cycles:
3429920
[ 0.512904] test_siphash: JenkinsHash cycles: 978267
So, we map hsiphash() -> SipHash1-3
32-bit x86:
[ 0.509868] test_siphash: SipHash2-4 cycles:
14812892
[ 0.513601] test_siphash: SipHash1-3 cycles:
9510710
[ 0.515263] test_siphash: HalfSipHash1-3 cycles:
3856157
[ 0.515952] test_siphash: JenkinsHash cycles:
1148567
So, we map hsiphash() -> HalfSipHash1-3
hsiphash() is roughly 3 times slower than jhash(), but comes with a
considerable security improvement.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 4.9 to avoid regression for WireGuard with only half
the siphash API present]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason A. Donenfeld [Fri, 16 Aug 2019 23:01:12 +0000 (00:01 +0100)]
siphash: add cryptographically secure PRF
commit
2c956a60778cbb6a27e0c7a8a52a91378c90e1d1 upstream.
SipHash is a 64-bit keyed hash function that is actually a
cryptographically secure PRF, like HMAC. Except SipHash is super fast,
and is meant to be used as a hashtable keyed lookup function, or as a
general PRF for short input use cases, such as sequence numbers or RNG
chaining.
For the first usage:
There are a variety of attacks known as "hashtable poisoning" in which an
attacker forms some data such that the hash of that data will be the
same, and then preceeds to fill up all entries of a hashbucket. This is
a realistic and well-known denial-of-service vector. Currently
hashtables use jhash, which is fast but not secure, and some kind of
rotating key scheme (or none at all, which isn't good). SipHash is meant
as a replacement for jhash in these cases.
There are a modicum of places in the kernel that are vulnerable to
hashtable poisoning attacks, either via userspace vectors or network
vectors, and there's not a reliable mechanism inside the kernel at the
moment to fix it. The first step toward fixing these issues is actually
getting a secure primitive into the kernel for developers to use. Then
we can, bit by bit, port things over to it as deemed appropriate.
While SipHash is extremely fast for a cryptographically secure function,
it is likely a bit slower than the insecure jhash, and so replacements
will be evaluated on a case-by-case basis based on whether or not the
difference in speed is negligible and whether or not the current jhash usage
poses a real security risk.
For the second usage:
A few places in the kernel are using MD5 or SHA1 for creating secure
sequence numbers, syn cookies, port numbers, or fast random numbers.
SipHash is a faster and more fitting, and more secure replacement for MD5
in those situations. Replacing MD5 and SHA1 with SipHash for these uses is
obvious and straight-forward, and so is submitted along with this patch
series. There shouldn't be much of a debate over its efficacy.
Dozens of languages are already using this internally for their hash
tables and PRFs. Some of the BSDs already use this in their kernels.
SipHash is a widely known high-speed solution to a widely known set of
problems, and it's time we catch-up.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jean-Philippe Aumasson <jeanphilippe.aumasson@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Biggers <ebiggers3@gmail.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 4.9 as dependency of commits
df453700e8d8 "inet: switch
IP ID generator to siphash" and
3c79107631db "netfilter: ctnetlink: don't
use conntrack/expect object addresses as id"]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Wang [Fri, 16 Aug 2019 23:01:01 +0000 (00:01 +0100)]
vhost: scsi: add weight support
commit
c1ea02f15ab5efb3e93fc3144d895410bf79fcf2 upstream.
This patch will check the weight and exit the loop if we exceeds the
weight. This is useful for preventing scsi kthread from hogging cpu
which is guest triggerable.
This addresses CVE-2019-3900.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Fixes:
057cbf49a1f0 ("tcm_vhost: Initial merge for vhost level target fabric driver")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[bwh: Backported to 4.9:
- Drop changes in vhost_scsi_ctl_handle_vq()
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Wang [Fri, 16 Aug 2019 23:00:53 +0000 (00:00 +0100)]
vhost_net: fix possible infinite loop
commit
e2412c07f8f3040593dfb88207865a3cd58680c0 upstream.
When the rx buffer is too small for a packet, we will discard the vq
descriptor and retry it for the next packet:
while ((sock_len = vhost_net_rx_peek_head_len(net, sock->sk,
&busyloop_intr))) {
...
/* On overrun, truncate and discard */
if (unlikely(headcount > UIO_MAXIOV)) {
iov_iter_init(&msg.msg_iter, READ, vq->iov, 1, 1);
err = sock->ops->recvmsg(sock, &msg,
1, MSG_DONTWAIT | MSG_TRUNC);
pr_debug("Discarded rx packet: len %zd\n", sock_len);
continue;
}
...
}
This makes it possible to trigger a infinite while..continue loop
through the co-opreation of two VMs like:
1) Malicious VM1 allocate 1 byte rx buffer and try to slow down the
vhost process as much as possible e.g using indirect descriptors or
other.
2) Malicious VM2 generate packets to VM1 as fast as possible
Fixing this by checking against weight at the end of RX and TX
loop. This also eliminate other similar cases when:
- userspace is consuming the packets in the meanwhile
- theoretical TOCTOU attack if guest moving avail index back and forth
to hit the continue after vhost find guest just add new buffers
This addresses CVE-2019-3900.
Fixes:
d8316f3991d20 ("vhost: fix total length when packets are too short")
Fixes:
3a4d5c94e9593 ("vhost_net: a kernel-level virtio server")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[bwh: Backported to 4.9:
- Both Tx modes are handled in one loop in handle_tx()
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Wang [Fri, 16 Aug 2019 23:00:44 +0000 (00:00 +0100)]
vhost: introduce vhost_exceeds_weight()
commit
e82b9b0727ff6d665fff2d326162b460dded554d upstream.
We used to have vhost_exceeds_weight() for vhost-net to:
- prevent vhost kthread from hogging the cpu
- balance the time spent between TX and RX
This function could be useful for vsock and scsi as well. So move it
to vhost.c. Device must specify a weight which counts the number of
requests, or it can also specific a byte_weight which counts the
number of bytes that has been processed.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
[bwh: Backported to 4.9:
- In vhost_net, both Tx modes are handled in one loop in handle_tx()
- Adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Wang [Fri, 16 Aug 2019 23:00:36 +0000 (00:00 +0100)]
vhost_net: introduce vhost_exceeds_weight()
commit
272f35cba53d088085e5952fd81d7a133ab90789 upstream.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[bwh: Backported to 4.9: adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Fri, 16 Aug 2019 23:00:28 +0000 (00:00 +0100)]
vhost_net: use packet weight for rx handler, too
commit
db688c24eada63b1efe6d0d7d835e5c3bdd71fd3 upstream.
Similar to commit
a2ac99905f1e ("vhost-net: set packet weight of
tx polling to 2 * vq size"), we need a packet-based limit for
handler_rx, too - elsewhere, under rx flood with small packets,
tx can be delayed for a very long time, even without busypolling.
The pkt limit applied to handle_rx must be the same applied by
handle_tx, or we will get unfair scheduling between rx and tx.
Tying such limit to the queue length makes it less effective for
large queue length values and can introduce large process
scheduler latencies, so a constant valued is used - likewise
the existing bytes limit.
The selected limit has been validated with PVP[1] performance
test with different queue sizes:
queue size 256 512 1024
baseline 366 354 362
weight 128 715 723 670
weight 256 740 745 733
weight 512 600 460 583
weight 1024 423 427 418
A packet weight of 256 gives peek performances in under all the
tested scenarios.
No measurable regression in unidirectional performance tests has
been detected.
[1] https://developers.redhat.com/blog/2017/06/05/measuring-and-comparing-open-vswitch-performance/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
haibinzhang(张海斌) [Fri, 16 Aug 2019 23:00:19 +0000 (00:00 +0100)]
vhost-net: set packet weight of tx polling to 2 * vq size
commit
a2ac99905f1ea8b15997a6ec39af69aa28a3653b upstream.
handle_tx will delay rx for tens or even hundreds of milliseconds when tx busy
polling udp packets with small length(e.g. 1byte udp payload), because setting
VHOST_NET_WEIGHT takes into account only sent-bytes but no single packet length.
Ping-Latencies shown below were tested between two Virtual Machines using
netperf (UDP_STREAM, len=1), and then another machine pinged the client:
vq size=256
Packet-Weight Ping-Latencies(millisecond)
min avg max
Origin 3.319 18.489 57.303
64 1.643 2.021 2.552
128 1.825 2.600 3.224
256 1.997 2.710 4.295
512 1.860 3.171 4.631
1024 2.002 4.173 9.056
2048 2.257 5.650 9.688
4096 2.093 8.508 15.943
vq size=512
Packet-Weight Ping-Latencies(millisecond)
min avg max
Origin 6.537 29.177 66.245
64 2.798 3.614 4.403
128 2.861 3.820 4.775
256 3.008 4.018 4.807
512 3.254 4.523 5.824
1024 3.079 5.335 7.747
2048 3.944 8.201 12.762
4096 4.158 11.057 19.985
Seems pretty consistent, a small dip at 2 VQ sizes.
Ring size is a hint from device about a burst size it can tolerate. Based on
benchmarks, set the weight to 2 * vq size.
To evaluate this change, another tests were done using netperf(RR, TX) between
two machines with Intel(R) Xeon(R) Gold 6133 CPU @ 2.50GHz, and vq size was
tweaked through qemu. Results shown below does not show obvious changes.
vq size=256 TCP_RR vq size=512 TCP_RR
size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize%
1/ 1/ -7%/ -2% 1/ 1/ 0%/ -2%
1/ 4/ +1%/ 0% 1/ 4/ +1%/ 0%
1/ 8/ +1%/ -2% 1/ 8/ 0%/ +1%
64/ 1/ -6%/ 0% 64/ 1/ +7%/ +3%
64/ 4/ 0%/ +2% 64/ 4/ -1%/ +1%
64/ 8/ 0%/ 0% 64/ 8/ -1%/ -2%
256/ 1/ -3%/ -4% 256/ 1/ -4%/ -2%
256/ 4/ +3%/ +4% 256/ 4/ +1%/ +2%
256/ 8/ +2%/ 0% 256/ 8/ +1%/ -1%
vq size=256 UDP_RR vq size=512 UDP_RR
size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize%
1/ 1/ -5%/ +1% 1/ 1/ -3%/ -2%
1/ 4/ +4%/ +1% 1/ 4/ -2%/ +2%
1/ 8/ -1%/ -1% 1/ 8/ -1%/ 0%
64/ 1/ -2%/ -3% 64/ 1/ +1%/ +1%
64/ 4/ -5%/ -1% 64/ 4/ +2%/ 0%
64/ 8/ 0%/ -1% 64/ 8/ -2%/ +1%
256/ 1/ +7%/ +1% 256/ 1/ -7%/ 0%
256/ 4/ +1%/ +1% 256/ 4/ -3%/ -4%
256/ 8/ +2%/ +2% 256/ 8/ +1%/ +1%
vq size=256 TCP_STREAM vq size=512 TCP_STREAM
size/sessions/+thu%/+normalize% size/sessions/+thu%/+normalize%
64/ 1/ 0%/ -3% 64/ 1/ 0%/ 0%
64/ 4/ +3%/ -1% 64/ 4/ -2%/ +4%
64/ 8/ +9%/ -4% 64/ 8/ -1%/ +2%
256/ 1/ +1%/ -4% 256/ 1/ +1%/ +1%
256/ 4/ -1%/ -1% 256/ 4/ -3%/ 0%
256/ 8/ +7%/ +5% 256/ 8/ -3%/ 0%
512/ 1/ +1%/ 0% 512/ 1/ -1%/ -1%
512/ 4/ +1%/ -1% 512/ 4/ 0%/ 0%
512/ 8/ +7%/ -5% 512/ 8/ +6%/ -1%
1024/ 1/ 0%/ -1% 1024/ 1/ 0%/ +1%
1024/ 4/ +3%/ 0% 1024/ 4/ +1%/ 0%
1024/ 8/ +8%/ +5% 1024/ 8/ -1%/ 0%
2048/ 1/ +2%/ +2% 2048/ 1/ -1%/ 0%
2048/ 4/ +1%/ 0% 2048/ 4/ 0%/ -1%
2048/ 8/ -2%/ 0% 2048/ 8/ 5%/ -1%
4096/ 1/ -2%/ 0% 4096/ 1/ -2%/ 0%
4096/ 4/ +2%/ 0% 4096/ 4/ 0%/ 0%
4096/ 8/ +9%/ -2% 4096/ 8/ -5%/ -1%
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Haibin Zhang <haibinzhang@tencent.com>
Signed-off-by: Yunfang Tai <yunfangtai@tencent.com>
Signed-off-by: Lidong Chen <lidongchen@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Borkmann [Fri, 16 Aug 2019 23:00:08 +0000 (00:00 +0100)]
bpf: add bpf_jit_limit knob to restrict unpriv allocations
commit
ede95a63b5e84ddeea6b0c473b36ab8bfd8c6ce3 upstream.
Rick reported that the BPF JIT could potentially fill the entire module
space with BPF programs from unprivileged users which would prevent later
attempts to load normal kernel modules or privileged BPF programs, for
example. If JIT was enabled but unsuccessful to generate the image, then
before commit
290af86629b2 ("bpf: introduce BPF_JIT_ALWAYS_ON config")
we would always fall back to the BPF interpreter. Nowadays in the case
where the CONFIG_BPF_JIT_ALWAYS_ON could be set, then the load will abort
with a failure since the BPF interpreter was compiled out.
Add a global limit and enforce it for unprivileged users such that in case
of BPF interpreter compiled out we fail once the limit has been reached
or we fall back to BPF interpreter earlier w/o using module mem if latter
was compiled in. In a next step, fair share among unprivileged users can
be resolved in particular for the case where we would fail hard once limit
is reached.
Fixes:
290af86629b2 ("bpf: introduce BPF_JIT_ALWAYS_ON config")
Fixes:
0a14842f5a3c ("net: filter: Just In Time compiler for x86-64")
Co-Developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[bwh: Backported to 4.9: adjust context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Borkmann [Fri, 16 Aug 2019 22:59:56 +0000 (23:59 +0100)]
bpf: restrict access to core bpf sysctls
commit
2e4a30983b0f9b19b59e38bbf7427d7fdd480d98 upstream.
Given BPF reaches far beyond just networking these days, it was
never intended to allow setting and in some cases reading those
knobs out of a user namespace root running without CAP_SYS_ADMIN,
thus tighten such access.
Also the bpf_jit_enable = 2 debugging mode should only be allowed
if kptr_restrict is not set since it otherwise can leak addresses
to the kernel log. Dump a note to the kernel log that this is for
debugging JITs only when enabled.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[bwh: Backported to 4.9:
- We don't have bpf_dump_raw_ok(), so drop the condition based on it. This
condition only made it a bit harder for a privileged user to do something
silly.
- Drop change to bpf_jit_kallsyms]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Borkmann [Fri, 16 Aug 2019 22:59:20 +0000 (23:59 +0100)]
bpf: get rid of pure_initcall dependency to enable jits
commit
fa9dd599b4dae841924b022768354cfde9affecb upstream.
Having a pure_initcall() callback just to permanently enable BPF
JITs under CONFIG_BPF_JIT_ALWAYS_ON is unnecessary and could leave
a small race window in future where JIT is still disabled on boot.
Since we know about the setting at compilation time anyway, just
initialize it properly there. Also consolidate all the individual
bpf_jit_enable variables into a single one and move them under one
location. Moreover, don't allow for setting unspecified garbage
values on them.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
[bwh: Backported to 4.9 as dependency of commit
2e4a30983b0f
"bpf: restrict access to core bpf sysctls":
- Drop change in arch/mips/net/ebpf_jit.c
- Drop change to bpf_jit_kallsyms
- Adjust filenames, context]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miles Chen [Tue, 13 Aug 2019 22:37:28 +0000 (15:37 -0700)]
mm/memcontrol.c: fix use after free in mem_cgroup_iter()
commit
54a83d6bcbf8f4700013766b974bf9190d40b689 upstream.
This patch is sent to report an use after free in mem_cgroup_iter()
after merging commit
be2657752e9e ("mm: memcg: fix use after free in
mem_cgroup_iter()").
I work with android kernel tree (4.9 & 4.14), and commit
be2657752e9e
("mm: memcg: fix use after free in mem_cgroup_iter()") has been merged
to the trees. However, I can still observe use after free issues
addressed in the commit
be2657752e9e. (on low-end devices, a few times
this month)
backtrace:
css_tryget <- crash here
mem_cgroup_iter
shrink_node
shrink_zones
do_try_to_free_pages
try_to_free_pages
__perform_reclaim
__alloc_pages_direct_reclaim
__alloc_pages_slowpath
__alloc_pages_nodemask
To debug, I poisoned mem_cgroup before freeing it:
static void __mem_cgroup_free(struct mem_cgroup *memcg)
for_each_node(node)
free_mem_cgroup_per_node_info(memcg, node);
free_percpu(memcg->stat);
+ /* poison memcg before freeing it */
+ memset(memcg, 0x78, sizeof(struct mem_cgroup));
kfree(memcg);
}
The coredump shows the position=0xdbbc2a00 is freed.
(gdb) p/x ((struct mem_cgroup_per_node *)0xe5009e00)->iter[8]
$13 = {position = 0xdbbc2a00, generation = 0x2efd}
0xdbbc2a00: 0xdbbc2e00 0x00000000 0xdbbc2800 0x00000100
0xdbbc2a10: 0x00000200 0x78787878 0x00026218 0x00000000
0xdbbc2a20: 0xdcad6000 0x00000001 0x78787800 0x00000000
0xdbbc2a30: 0x78780000 0x00000000 0x0068fb84 0x78787878
0xdbbc2a40: 0x78787878 0x78787878 0x78787878 0xe3fa5cc0
0xdbbc2a50: 0x78787878 0x78787878 0x00000000 0x00000000
0xdbbc2a60: 0x00000000 0x00000000 0x00000000 0x00000000
0xdbbc2a70: 0x00000000 0x00000000 0x00000000 0x00000000
0xdbbc2a80: 0x00000000 0x00000000 0x00000000 0x00000000
0xdbbc2a90: 0x00000001 0x00000000 0x00000000 0x00100000
0xdbbc2aa0: 0x00000001 0xdbbc2ac8 0x00000000 0x00000000
0xdbbc2ab0: 0x00000000 0x00000000 0x00000000 0x00000000
0xdbbc2ac0: 0x00000000 0x00000000 0xe5b02618 0x00001000
0xdbbc2ad0: 0x00000000 0x78787878 0x78787878 0x78787878
0xdbbc2ae0: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2af0: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2b00: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2b10: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2b20: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2b30: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2b40: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2b50: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2b60: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2b70: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2b80: 0x78787878 0x78787878 0x00000000 0x78787878
0xdbbc2b90: 0x78787878 0x78787878 0x78787878 0x78787878
0xdbbc2ba0: 0x78787878 0x78787878 0x78787878 0x78787878
In the reclaim path, try_to_free_pages() does not setup
sc.target_mem_cgroup and sc is passed to do_try_to_free_pages(), ...,
shrink_node().
In mem_cgroup_iter(), root is set to root_mem_cgroup because
sc->target_mem_cgroup is NULL. It is possible to assign a memcg to
root_mem_cgroup.nodeinfo.iter in mem_cgroup_iter().
try_to_free_pages
struct scan_control sc = {...}, target_mem_cgroup is 0x0;
do_try_to_free_pages
shrink_zones
shrink_node
mem_cgroup *root = sc->target_mem_cgroup;
memcg = mem_cgroup_iter(root, NULL, &reclaim);
mem_cgroup_iter()
if (!root)
root = root_mem_cgroup;
...
css = css_next_descendant_pre(css, &root->css);
memcg = mem_cgroup_from_css(css);
cmpxchg(&iter->position, pos, memcg);
My device uses memcg non-hierarchical mode. When we release a memcg:
invalidate_reclaim_iterators() reaches only dead_memcg and its parents.
If non-hierarchical mode is used, invalidate_reclaim_iterators() never
reaches root_mem_cgroup.
static void invalidate_reclaim_iterators(struct mem_cgroup *dead_memcg)
{
struct mem_cgroup *memcg = dead_memcg;
for (; memcg; memcg = parent_mem_cgroup(memcg)
...
}
So the use after free scenario looks like:
CPU1 CPU2
try_to_free_pages
do_try_to_free_pages
shrink_zones
shrink_node
mem_cgroup_iter()
if (!root)
root = root_mem_cgroup;
...
css = css_next_descendant_pre(css, &root->css);
memcg = mem_cgroup_from_css(css);
cmpxchg(&iter->position, pos, memcg);
invalidate_reclaim_iterators(memcg);
...
__mem_cgroup_free()
kfree(memcg);
try_to_free_pages
do_try_to_free_pages
shrink_zones
shrink_node
mem_cgroup_iter()
if (!root)
root = root_mem_cgroup;
...
mz = mem_cgroup_nodeinfo(root, reclaim->pgdat->node_id);
iter = &mz->iter[reclaim->priority];
pos = READ_ONCE(iter->position);
css_tryget(&pos->css) <- use after free
To avoid this, we should also invalidate root_mem_cgroup.nodeinfo.iter
in invalidate_reclaim_iterators().
[cai@lca.pw: fix -Wparentheses compilation warning]
Link: http://lkml.kernel.org/r/1564580753-17531-1-git-send-email-cai@lca.pw
Link: http://lkml.kernel.org/r/20190730015729.4406-1-miles.chen@mediatek.com
Fixes:
5ac8fb31ad2e ("mm: memcontrol: convert reclaim iterator to simple css refcounting")
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Isaac J. Manjarres [Tue, 13 Aug 2019 22:37:37 +0000 (15:37 -0700)]
mm/usercopy: use memory range to be accessed for wraparound check
commit
951531691c4bcaa59f56a316e018bc2ff1ddf855 upstream.
Currently, when checking to see if accessing n bytes starting at address
"ptr" will cause a wraparound in the memory addresses, the check in
check_bogus_address() adds an extra byte, which is incorrect, as the
range of addresses that will be accessed is [ptr, ptr + (n - 1)].
This can lead to incorrectly detecting a wraparound in the memory
address, when trying to read 4 KB from memory that is mapped to the the
last possible page in the virtual address space, when in fact, accessing
that range of memory would not cause a wraparound to occur.
Use the memory range that will actually be accessed when considering if
accessing a certain amount of bytes will cause the memory address to
wrap around.
Link: http://lkml.kernel.org/r/1564509253-23287-1-git-send-email-isaacm@codeaurora.org
Fixes:
f5509cc18daa ("mm: Hardened usercopy")
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Co-developed-by: Prasad Sodagudi <psodagud@codeaurora.org>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Trilok Soni <tsoni@codeaurora.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[kees: backport to v4.9]
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gustavo A. R. Silva [Sat, 10 Aug 2019 04:43:56 +0000 (23:43 -0500)]
sh: kernel: hw_breakpoint: Fix missing break in switch statement
commit
1ee1119d184bb06af921b48c3021d921bbd85bac upstream.
Add missing break statement in order to prevent the code from falling
through to case SH_BREAKPOINT_WRITE.
Fixes:
09a072947791 ("sh: hw-breakpoints: Add preliminary support for SH-4A UBC.")
Cc: stable@vger.kernel.org
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suganath Prabu [Tue, 30 Jul 2019 07:43:57 +0000 (03:43 -0400)]
scsi: mpt3sas: Use 63-bit DMA addressing on SAS35 HBA
commit
df9a606184bfdb5ae3ca9d226184e9489f5c24f7 upstream.
Although SAS3 & SAS3.5 IT HBA controllers support 64-bit DMA addressing, as
per hardware design, if DMA-able range contains all 64-bits
set (0xFFFFFFFF-
FFFFFFFF) then it results in a firmware fault.
E.g. SGE's start address is 0xFFFFFFFF-
FFFF000 and data length is 0x1000
bytes. when HBA tries to DMA the data at 0xFFFFFFFF-
FFFFFFFF location then
HBA will fault the firmware.
Driver will set 63-bit DMA mask to ensure the above address will not be
used.
Cc: <stable@vger.kernel.org> # 5.1.20+
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Emmanuel Grumbach [Sun, 21 Jul 2019 11:02:27 +0000 (14:02 +0300)]
iwlwifi: don't unmap as page memory that was mapped as single
commit
87e7e25aee6b59fef740856f4e86d4b60496c9e1 upstream.
In order to remember how to unmap a memory (as single or
as page), we maintain a bit per Transmit Buffer (TBs) in
the meta data (structure iwl_cmd_meta).
We maintain a bitmap: 1 bit per TB.
If the TB is set, we will free the memory as a page.
This bitmap was never cleared. Fix this.
Cc: stable@vger.kernel.org
Fixes:
3cd1980b0cdf ("iwlwifi: pcie: introduce new tfd and tb formats")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Norris [Wed, 24 Jul 2019 19:46:34 +0000 (12:46 -0700)]
mwifiex: fix 802.11n/WPA detection
commit
df612421fe2566654047769c6852ffae1a31df16 upstream.
Commit
63d7ef36103d ("mwifiex: Don't abort on small, spec-compliant
vendor IEs") adjusted the ieee_types_vendor_header struct, which
inadvertently messed up the offsets used in
mwifiex_is_wpa_oui_present(). Add that offset back in, mirroring
mwifiex_is_rsn_oui_present().
As it stands, commit
63d7ef36103d breaks compatibility with WPA (not
WPA2) 802.11n networks, since we hit the "info: Disable 11n if AES is
not supported by AP" case in mwifiex_is_network_compatible().
Fixes:
63d7ef36103d ("mwifiex: Don't abort on small, spec-compliant vendor IEs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve French [Thu, 25 Jul 2019 23:13:10 +0000 (18:13 -0500)]
smb3: send CAP_DFS capability during session setup
commit
8d33096a460d5b9bd13300f01615df5bb454db10 upstream.
We had a report of a server which did not do a DFS referral
because the session setup Capabilities field was set to 0
(unlike negotiate protocol where we set CAP_DFS). Better to
send it session setup in the capabilities as well (this also
more closely matches Windows client behavior).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Shilovsky [Mon, 22 Jul 2019 18:34:59 +0000 (11:34 -0700)]
SMB3: Fix deadlock in validate negotiate hits reconnect
commit
e99c63e4d86d3a94818693147b469fa70de6f945 upstream.
Currently we skip SMB2_TREE_CONNECT command when checking during
reconnect because Tree Connect happens when establishing
an SMB session. For SMB 3.0 protocol version the code also calls
validate negotiate which results in SMB2_IOCL command being sent
over the wire. This may deadlock on trying to acquire a mutex when
checking for reconnect. Fix this by skipping SMB2_IOCL command
when doing the reconnect check.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Brian Norris [Fri, 26 Jul 2019 22:47:58 +0000 (15:47 -0700)]
mac80211: don't WARN on short WMM parameters from AP
commit
05aaa5c97dce4c10a9e7eae2f1569a684e0c5ced upstream.
In a very similar spirit to commit
c470bdc1aaf3 ("mac80211: don't WARN
on bad WMM parameters from buggy APs"), an AP may not transmit a
fully-formed WMM IE. For example, it may miss or repeat an Access
Category. The above loop won't catch that and will instead leave one of
the four ACs zeroed out. This triggers the following warning in
drv_conf_tx()
wlan0: invalid CW_min/CW_max: 0/0
and it may leave one of the hardware queues unconfigured. If we detect
such a case, let's just print a warning and fall back to the defaults.
Tested with a hacked version of hostapd, intentionally corrupting the
IEs in hostapd_eid_wmm().
Cc: stable@vger.kernel.org
Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20190726224758.210953-1-briannorris@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 6 Aug 2019 12:03:56 +0000 (14:03 +0200)]
ALSA: hda - Don't override global PCM hw info flag
commit
c1c6c877b0c79fd7e05c931435aa42211eaeebaf upstream.
The commit
bfcba288b97f ("ALSA - hda: Add support for link audio time
reporting") introduced the conditional PCM hw info setup, but it
overwrites the global azx_pcm_hw object. This will cause a problem if
any other HD-audio controller, as it'll inherit the same bit flag
although another controller doesn't support that feature.
Fix the bug by setting the PCM hw info flag locally.
Fixes:
bfcba288b97f ("ALSA - hda: Add support for link audio time reporting")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wenwen Wang [Thu, 8 Aug 2019 05:50:58 +0000 (00:50 -0500)]
ALSA: firewire: fix a memory leak bug
commit
1be3c1fae6c1e1f5bb982b255d2034034454527a upstream.
In iso_packets_buffer_init(), 'b->packets' is allocated through
kmalloc_array(). Then, the aligned packet size is checked. If it is
larger than PAGE_SIZE, -EINVAL will be returned to indicate the error.
However, the allocated 'b->packets' is not deallocated on this path,
leading to a memory leak.
To fix the above issue, free 'b->packets' before returning the error code.
Fixes:
31ef9134eb52 ("ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driver")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org> # v2.6.39+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Fri, 26 Jul 2019 15:00:49 +0000 (08:00 -0700)]
hwmon: (nct7802) Fix wrong detection of in4 presence
commit
38ada2f406a9b81fb1249c5c9227fa657e7d5671 upstream.
The code to detect if in4 is present is wrong; if in4 is not present,
the in4_input sysfs attribute is still present.
In detail:
- Ihen RTD3_MD=11 (VSEN3 present), everything is as expected (no bug).
- If we have RTD3_MD!=11 (no VSEN3), we unexpectedly have a in4_input
file under /sys and the "sensors" command displays in4_input.
But as expected, we have no in4_min, in4_max, in4_alarm, in4_beep.
Fix is_visible function to detect and report in4_input visibility
as expected.
Reported-by: Gilles Buloz <Gilles.Buloz@kontron.com>
Cc: Gilles Buloz <Gilles.Buloz@kontron.com>
Cc: stable@vger.kernel.org
Fixes:
3434f37835804 ("hwmon: Driver for Nuvoton NCT7802Y")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Bortoli [Wed, 31 Jul 2019 14:54:47 +0000 (10:54 -0400)]
can: peak_usb: pcan_usb_fd: Fix info-leaks to USB devices
commit
30a8beeb3042f49d0537b7050fd21b490166a3d9 upstream.
Uninitialized Kernel memory can leak to USB devices.
Fix by using kzalloc() instead of kmalloc() on the affected buffers.
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+513e4d0985298538bf9b@syzkaller.appspotmail.com
Fixes:
0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomas Bortoli [Wed, 31 Jul 2019 14:54:47 +0000 (10:54 -0400)]
can: peak_usb: pcan_usb_pro: Fix info-leaks to USB devices
commit
ead16e53c2f0ed946d82d4037c630e2f60f4ab69 upstream.
Uninitialized Kernel memory can leak to USB devices.
Fix by using kzalloc() instead of kmalloc() on the affected buffers.
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+d6a5a1a3657b596ef132@syzkaller.appspotmail.com
Fixes:
f14e22435a27 ("net: can: peak_usb: Do not do dma on the stack")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leonard Crestez [Wed, 24 Jul 2019 12:53:24 +0000 (15:53 +0300)]
perf/core: Fix creating kernel counters for PMUs that override event->cpu
[ Upstream commit
4ce54af8b33d3e21ca935fc1b89b58cbba956051 ]
Some hardware PMU drivers will override perf_event.cpu inside their
event_init callback. This causes a lockdep splat when initialized through
the kernel API:
WARNING: CPU: 0 PID: 250 at kernel/events/core.c:2917 ctx_sched_out+0x78/0x208
pc : ctx_sched_out+0x78/0x208
Call trace:
ctx_sched_out+0x78/0x208
__perf_install_in_context+0x160/0x248
remote_function+0x58/0x68
generic_exec_single+0x100/0x180
smp_call_function_single+0x174/0x1b8
perf_install_in_context+0x178/0x188
perf_event_create_kernel_counter+0x118/0x160
Fix this by calling perf_install_in_context with event->cpu, just like
perf_event_open
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Frank Li <Frank.li@nxp.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/c4ebe0503623066896d7046def4d6b1e06e0eb2e.1563972056.git.leonard.crestez@nxp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Thu, 18 Jul 2019 13:03:15 +0000 (15:03 +0200)]
tty/ldsem, locking/rwsem: Add missing ACQUIRE to read_failed sleep loop
[ Upstream commit
952041a8639a7a3a73a2b6573cb8aa8518bc39f8 ]
While reviewing rwsem down_slowpath, Will noticed ldsem had a copy of
a bug we just found for rwsem.
X = 0;
CPU0 CPU1
rwsem_down_read()
for (;;) {
set_current_state(TASK_UNINTERRUPTIBLE);
X = 1;
rwsem_up_write();
rwsem_mark_wake()
atomic_long_add(adjustment, &sem->count);
smp_store_release(&waiter->task, NULL);
if (!waiter.task)
break;
...
}
r = X;
Allows 'r == 0'.
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes:
4898e640caf0 ("tty: Add timed, writer-prioritized rw semaphore")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hannes Reinecke [Fri, 12 Jul 2019 06:53:47 +0000 (08:53 +0200)]
scsi: scsi_dh_alua: always use a 2 second delay before retrying RTPG
[ Upstream commit
20122994e38aef0ae50555884d287adde6641c94 ]
Retrying immediately after we've received a 'transitioning' sense code is
pretty much pointless, we should always use a delay before retrying. So
ensure the default delay is applied before retrying.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Tested-by: Zhangguanghui <zhang.guanghui@h3c.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tyrel Datwyler [Wed, 17 Jul 2019 19:48:27 +0000 (14:48 -0500)]
scsi: ibmvfc: fix WARN_ON during event pool release
[ Upstream commit
5578257ca0e21056821e6481bd534ba267b84e58 ]
While removing an ibmvfc client adapter a WARN_ON like the following
WARN_ON is seen in the kernel log:
WARNING: CPU: 6 PID: 5421 at ./include/linux/dma-mapping.h:541
ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc]
CPU: 6 PID: 5421 Comm: rmmod Tainted: G E 4.17.0-rc1-next-
20180419-autotest #1
NIP:
d00000000290328c LR:
d00000000290325c CTR:
c00000000036ee20
REGS:
c000000288d1b7e0 TRAP: 0700 Tainted: G E (4.17.0-rc1-next-
20180419-autotest)
MSR:
800000010282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR:
44008828 XER:
20000000
CFAR:
c00000000036e408 SOFTE: 1
GPR00:
d00000000290325c c000000288d1ba60 d000000002917900 c000000289d75448
GPR04:
0000000000000071 c0000000ff870000 0000000018040000 0000000000000001
GPR08:
0000000000000000 c00000000156e838 0000000000000001 d00000000290c640
GPR12:
c00000000036ee20 c00000001ec4dc00 0000000000000000 0000000000000000
GPR16:
0000000000000000 0000000000000000 00000100276901e0 0000000010020598
GPR20:
0000000010020550 0000000010020538 0000000010020578 00000000100205b0
GPR24:
0000000000000000 0000000000000000 0000000010020590 5deadbeef0000100
GPR28:
5deadbeef0000200 d000000002910b00 0000000000000071 c0000002822f87d8
NIP [
d00000000290328c] ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc]
LR [
d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc]
Call Trace:
[
c000000288d1ba60] [
d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc] (unreliable)
[
c000000288d1baf0] [
d000000002909390] ibmvfc_abort_task_set+0x7b0/0x8b0 [ibmvfc]
[
c000000288d1bb70] [
c0000000000d8c68] vio_bus_remove+0x68/0x100
[
c000000288d1bbb0] [
c0000000007da7c4] device_release_driver_internal+0x1f4/0x2d0
[
c000000288d1bc00] [
c0000000007da95c] driver_detach+0x7c/0x100
[
c000000288d1bc40] [
c0000000007d8af4] bus_remove_driver+0x84/0x140
[
c000000288d1bcb0] [
c0000000007db6ac] driver_unregister+0x4c/0xa0
[
c000000288d1bd20] [
c0000000000d6e7c] vio_unregister_driver+0x2c/0x50
[
c000000288d1bd50] [
d00000000290ba0c] cleanup_module+0x24/0x15e0 [ibmvfc]
[
c000000288d1bd70] [
c0000000001dadb0] sys_delete_module+0x220/0x2d0
[
c000000288d1be30] [
c00000000000b284] system_call+0x58/0x6c
Instruction dump:
e8410018 e87f0068 809f0078 e8bf0080 e8df0088 2fa30000 419e008c e9230200
2fa90000 419e0080 894d098a 794a07e0 <
0b0a0000>
e9290008 2fa90000 419e0028
This is tripped as a result of irqs being disabled during the call to
dma_free_coherent() by ibmvfc_free_event_pool(). At this point in the code path
we have quiesced the adapter and its overly paranoid anyways to be holding the
host lock.
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Junxiao Bi [Mon, 22 Jul 2019 16:15:24 +0000 (09:15 -0700)]
scsi: megaraid_sas: fix panic on loading firmware crashdump
[ Upstream commit
3b5f307ef3cb5022bfe3c8ca5b8f2114d5bf6c29 ]
While loading fw crashdump in function fw_crash_buffer_show(), left bytes
in one dma chunk was not checked, if copying size over it, overflow access
will cause kernel panic.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Mon, 22 Jul 2019 14:51:50 +0000 (16:51 +0200)]
ARM: davinci: fix sleep.S build error on ARMv4
[ Upstream commit
d64b212ea960db4276a1d8372bd98cb861dfcbb0 ]
When building a multiplatform kernel that includes armv4 support,
the default target CPU does not support the blx instruction,
which leads to a build failure:
arch/arm/mach-davinci/sleep.S: Assembler messages:
arch/arm/mach-davinci/sleep.S:56: Error: selected processor does not support `blx ip' in ARM mode
Add a .arch statement in the sources to make this file build.
Link: https://lore.kernel.org/r/20190722145211.1154785-1-arnd@arndb.de
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenzo Pieralisi [Mon, 22 Jul 2019 16:25:48 +0000 (17:25 +0100)]
ACPI/IORT: Fix off-by-one check in iort_dev_find_its_id()
[ Upstream commit
5a46d3f71d5e5a9f82eabc682f996f1281705ac7 ]
Static analysis identified that index comparison against ITS entries in
iort_dev_find_its_id() is off by one.
Update the comparison condition and clarify the resulting error
message.
Fixes:
4bf2efd26d76 ("ACPI: Add new IORT functions to support MSI domain handling")
Link: https://lore.kernel.org/linux-arm-kernel/20190613065410.GB16334@mwanda/
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Mon, 22 Jul 2019 12:26:34 +0000 (14:26 +0200)]
drbd: dynamically allocate shash descriptor
[ Upstream commit
77ce56e2bfaa64127ae5e23ef136c0168b818777 ]
Building with clang and KASAN, we get a warning about an overly large
stack frame on 32-bit architectures:
drivers/block/drbd/drbd_receiver.c:921:31: error: stack frame size of 1280 bytes in function 'conn_connect'
[-Werror,-Wframe-larger-than=]
We already allocate other data dynamically in this function, so
just do the same for the shash descriptor, which makes up most of
this memory.
Link: https://lore.kernel.org/lkml/20190617132440.2721536-1-arnd@arndb.de/
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Roland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnaldo Carvalho de Melo [Thu, 18 Jul 2019 14:28:37 +0000 (11:28 -0300)]
perf probe: Avoid calling freeing routine multiple times for same pointer
[ Upstream commit
d95daf5accf4a72005daa13fbb1d1bd8709f2861 ]
When perf_add_probe_events() we call cleanup_perf_probe_events() for the
pev pointer it receives, then, as part of handling this failure the main
'perf probe' goes on and calls cleanup_params() and that will again call
cleanup_perf_probe_events()for the same pointer, so just set nevents to
zero when handling the failure of perf_add_probe_events() to avoid the
double free.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-x8qgma4g813z96dvtw9w219q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Charles Keepax [Mon, 22 Jul 2019 09:24:36 +0000 (10:24 +0100)]
ALSA: compress: Be more restrictive about when a drain is allowed
[ Upstream commit
3b8179944cb0dd53e5223996966746cdc8a60657 ]
Draining makes little sense in the situation of hardware overrun, as the
hardware will have consumed all its available samples. Additionally,
draining whilst the stream is paused would presumably get stuck as no
data is being consumed on the DSP side.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Charles Keepax [Mon, 22 Jul 2019 09:24:35 +0000 (10:24 +0100)]
ALSA: compress: Don't allow paritial drain operations on capture streams
[ Upstream commit
a70ab8a8645083f3700814e757f2940a88b7ef88 ]
Partial drain and next track are intended for gapless playback and
don't really have an obvious interpretation for a capture stream, so
makes sense to not allow those operations on capture streams.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Charles Keepax [Mon, 22 Jul 2019 09:24:34 +0000 (10:24 +0100)]
ALSA: compress: Prevent bypasses of set_params
[ Upstream commit
26c3f1542f5064310ad26794c09321780d00c57d ]
Currently, whilst in SNDRV_PCM_STATE_OPEN it is possible to call
snd_compr_stop, snd_compr_drain and snd_compr_partial_drain, which
allow a transition to SNDRV_PCM_STATE_SETUP. The stream should
only be able to move to the setup state once it has received a
SNDRV_COMPRESS_SET_PARAMS ioctl. Fix this issue by not allowing
those ioctls whilst in the open state.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Charles Keepax [Mon, 22 Jul 2019 09:24:33 +0000 (10:24 +0100)]
ALSA: compress: Fix regression on compressed capture streams
[ Upstream commit
4475f8c4ab7b248991a60d9c02808dbb813d6be8 ]
A previous fix to the stop handling on compressed capture streams causes
some knock on issues. The previous fix updated snd_compr_drain_notify to
set the state back to PREPARED for capture streams. This causes some
issues however as the handling for snd_compr_poll differs between the
two states and some user-space applications were relying on the poll
failing after the stream had been stopped.
To correct this regression whilst still fixing the original problem the
patch was addressing, update the capture handling to skip the PREPARED
state rather than skipping the SETUP state as it has done until now.
Fixes:
4f2ab5e1d13d ("ALSA: compress: Fix stop handling on compressed capture streams")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Julian Wiedmann [Thu, 11 Jul 2019 16:17:36 +0000 (18:17 +0200)]
s390/qdio: add sanity checks to the fast-requeue path
[ Upstream commit
a6ec414a4dd529eeac5c3ea51c661daba3397108 ]
If the device driver were to send out a full queue's worth of SBALs,
current code would end up discovering the last of those SBALs as PRIMED
and erroneously skip the SIGA-w. This immediately stalls the queue.
Add a check to not attempt fast-requeue in this case. While at it also
make sure that the state of the previous SBAL was successfully extracted
before inspecting it.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wen Yang [Wed, 17 Jul 2019 03:55:04 +0000 (11:55 +0800)]
cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init()
[ Upstream commit
e0a12445d1cb186d875410d093a00d215bec6a89 ]
The cpu variable is still being used in the of_get_property() call
after the of_node_put() call, which may result in use-after-free.
Fixes:
a9acc26b75f6 ("cpufreq/pasemi: fix possible object reference leak")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Björn Gerhart [Mon, 15 Jul 2019 16:33:55 +0000 (18:33 +0200)]
hwmon: (nct6775) Fix register address and added missed tolerance for nct6106
[ Upstream commit
f3d43e2e45fd9d44ba52d20debd12cd4ee9c89bf ]
Fixed address of third NCT6106_REG_WEIGHT_DUTY_STEP, and
added missed NCT6106_REG_TOLERANCE_H.
Fixes:
6c009501ff200 ("hwmon: (nct6775) Add support for NCT6102D/6106D")
Signed-off-by: Bjoern Gerhart <gerhart@posteo.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / GitHub / LineageOS / G12 / android_kernel_amlogic_linux-4.9.git / log