staging/wlan-ng: improve readability of usb_prism_tbl[]

Minor changes to nicely line up device entries.

Signed-off-by: Denis Pithon <denis.pithon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb coding style cleanup

This fixes "missing a blank line after declaration" warnings from
checkpatch.pl for driver xgifb. The driver has no remaining errors or
warnings from checkpatch.pl

Signed-off-by: Vitor Braga <vitorpybraga@gmail.com>
Reviewed-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: imx-drm: Fix some lines over 80 characters

Signed-off-by: Antoine Schweitzer-Chaput <antoine@schweitzer-chaput.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

imx-drm: fix hdmi hotplug detection initial state

The initial state at boot is assumed to be disconnected, and we hope
to receive an interrupt to update the status.  Let's be more explicit
about the current state - reading the PHY status register tells us
the current level of the hotplug signal, which we can report back in
the _detect() method.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

imx-drm: imx-drm-core: Fix imx_drm_encoder_get_mux_id

The decoder mux id is equal to the port id of the encoder's input port
that is connected to the given crtc, not to the endpoint id (which is
arbitrary and usually zero).

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

imx-hdmi: Propagate the real error code on platform_get_irq() failure

No need to return a 'fake' return value on platform_get_irq() failure.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: imx-drm: imx-hdmi: clean up hdmi_phy_wait_i2c_done

Simplify hdmi_phy_wait_i2c_done so the call to hdmi_readb is
only done in one place. Also check for timout before waiting
as suggested by Troy Kisky.
This also fixes a checkpatch warning.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: imx-drm: add LVDS666 support for parallel display

Support the LVDS666 format on the IPUv3 parallel display.
This makes the screen work on my Hercules eCAFE Slim HD.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: netlogic: fix missing a blank line after declarations

Fix checkpatch.pl issues with missing blank line after declarations.

Signed-off-by: Toby Smith <toby@tismith.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: slicoss: Fix smatch warning in slicoss.c

This patch fixes following smatch warning:
slicoss/slicoss.c:1429 slic_cmdq_addcmdpage() error: we previously assumed 'pslic_handle' could be null

Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8821ae: fix sparse address space warning

Change the definition of pci_mem_start|end from correct from pci_io(un)map's
point of view.

Signed-off-by: Anders Darander <anders.darander@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: Remove built-in firmware images

The driver can already use request_firmware() to load firmware, and
always does so.  There is code in init_firmware() to use the static
firmware images, but it's unreachable!  Remove the data and simplify
init_firmware() accordingly.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Fix typo in rtl8192e

Fix spelling typo in comments within rtl8192e.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Reviewed-by: James Cameron <quozl@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: A word in printk is split into 2 lines

A word in printk is split into two lines.
Change it into one line.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Reviewed-by: James Cameron <quozl@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused enum LED_CTL_MODE members.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused enum LED_STATE_871x members.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unused macros.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: refactor led related structures.

struct led_priv contains two variables SwLed0 and SwLed1 but only
SwLed0 is being used by SwLedControlModel1() function.

SwLedControlModel1() function performs led operations.

This patch removes SwLed1 and code which uses SwLed1.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove enum LED_STRATEGY_871x .

 Now driver has only one type of led blinking strategy, so we don't
 need enum LED_STRATEGY_871x variable to store led blinking strategy
 type.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Simplify led blinking strategy code.

driver has code to blink the led in 7 different ways.
struct led_priv contains an enum LED_STRATEGY_871x variable which is
initialized to SW_LED_MODE1 inside rtl8188eu_InitSwLeds() function.
it means driver is hard coded to use only SW_LED_MODE1 blinking strategy.
so we can remove the code related to other blinking strategies
e.g. SW_LED_MODE[0|2|3|4|5|6].

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove _InitHWLed() function.

_InitHWLed() function does nothing.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove _ReadLEDSetting() function.

_ReadLEDSetting() doesn't read led settings this function actually
initialize  member variables of struct led_priv, we should do that
inside rtl8188eu_InitSwLeds().

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove rtw_led_blink_cmd() function.

rtw_led_blink_cmd() isn't being used by driver.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove empty header file

drv_types_linux.h is empty, so remove the header file and its
reference.

Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix spaces instead of tabs for rtw_recv.c

This commit fixes the following checkpatch errors:

rtl8188eu/core/rtw_recv.c
    - 1874: ERROR: code indent should use tabs where possible

Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: fix spaces instead of tabs for rtw_p2p.c

This commit fixes the following checkpatch errors:

rtl8188eu/core/rtw_p2p.c
    - 1508: ERROR: code indent should use tabs where possible
    - 1509: ERROR: code indent should use tabs where possible
    - 1510: ERROR: code indent should use tabs where possible

Signed-off-by: Konrad Zapalowicz <bergo.torino@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: don't initialise statics to 0 or NULL in halbtc8192e2ant.c

Fixes all checkpatch errors reporting that statics shouldn't be initialised
to their defualt values.

Signed-off-by: Mark Einon <mark@einon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: Fix indetentation of switch case statements

Fixes checkpatch error:

ERROR: switch and case should be at the same indent
+               switch (coex_dm->cur_retrylimit_type) {
+                       case 0: /* normal mode */
[...]
+                       case 1: /* retry limit=8 */
[...]
+                       default:

Signed-off-by: Mark Einon <mark@einon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: halbtc8192e2ant.c fix checkpatch leading spaces/tabs issues

Fix checkpatch issues relating to using leading spaces instead of tabs.
Whitespace changes only.

Signed-off-by: Mark Einon <mark@einon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: Fix checkpatch whitespace issues

Whitespace changes only to appease checkpatch warnings.

Signed-off-by: Mark Einon <mark@einon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: Remove declaration assignment to zero

We set btrssi to zero and then immediately assign it. Assign it
on declaration instead.

Signed-off-by: Mark Einon <mark@einon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: Fix halbtc8192e2ant.c 'defined but not used' sparse warnings

Sparse complains about halbtc8192e2ant_low_penalty_ra() not being used,
and subsequently halbtc8192e2ant_set_sw_penalty_tx_rateadaptive() when
this is removed. remove both functions.

Signed-off-by: Mark Einon <mark@einon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: Fix halbtc8192e2ant.c 'should it be static?' sparse warnings

In halbtc8192e2ant.c, fix all instances of the sparse warning:

warning: symbol 'xxx' was not declared. Should it be static?

Signed-off-by: Mark Einon <mark@einon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: Remove unused functions

Remove functions not being called from anywhere:

halbtc8192e2ant_set_adc_backoff()
halbtc8192e2ant_adc_backoff()

Signed-off-by: Mark Einon <mark@einon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8821ae: Remove file #if 1

All code in this file is encapsulated in a useless #if 1
declaration, remove it.

Signed-off-by: Mark Einon <mark@einon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: Fix declaration of symbols

The two declarations with issues in rtl_wx.h:

  * function: struct iw_statistics *r8192_get_wireless_stats();
  * variable: extern struct iw_handler_def r8192_wx_handlers_def;

The symbol 'r8192_get_wireless_stats' is declared as 'extern'
but it is only used in the local scope. The declaration is deleted
of rtl_wx.h, fixing the conflict with the 'extern' and 'static' scope.

The symbol 'r8192_wx_handlers_def' was fixed of some issues related
to variable declaration marked as 'extern' implicitly,
causing this sparse warning:

drivers/staging/rtl8192e/rtl8192e/rtl_wx.c:1323:24: warning: symbol
'r8192_wx_handlers_def' was not declared. Should it be static?

Resolved incluing the fixed header to rtl_wx.c

Also, isn't declared as constant variable, so it declared as such.
And delete unnecessary cast in rtl_core.c.

Signed-off-by: Joel Pelaez Jorge <joelpelaez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging:rtl8192e:rtl819x_BAProc:Remove whitespaces

ERROR: spaces required around that '=' (ctx:OxW)

Signed-off-by: Paul McQuade <paulmcquad@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: overflow in update_sta_support_rate()

The ->SupportedRates[] array has NDIS_802_11_LENGTH_RATES_EX (16)
elements.  Since "ie_len" comes from then network and can go up to 255
then it means we should add a range check to prevent memory corruption.

Fixes: d6846af679e0 ('staging: r8188eu: Add files for new driver - part 7')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: Fix indentation problems

Fix coding style problems (incorrect indentation).

Signed-off-by: Loïc Pellegrino <oort10@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging rtl8188eu: add a blank line after declarations

fix a coding style issue: Missing a blank line after declarations

Signed-off-by: huanqi chi <chihuanqi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: silicom: remove redundant pci_get_drvdata() call

The pci_get_drvdata() and checking NULL for dev are
called twice in while loop in is_bypass_dev().

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: silicom: fix dangerous if condition in bpctl_mod.c

checkpatch script returns the following warning:
ERROR: do not use assignment in if condition
+                       if (((dev_num = get_dev_idx(dev->ifindex)) ==
            -1) |

This patch fixes the if condition by splitting it.

Signed-off-by: Neil Armstrong <superna9999@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: silicom: remove BP_PROC_SUPPORT dependant code

Some code is hide inside #ifdef BP_PROC_SUPPORT and it never defined
anywhere. And, it made defined but not used function which calling
code was hide inside #ifdef BP_PROC_SUPPORT and caused following
build warning:

drivers/staging/silicom/bpctl_mod.c:6786:12: warning:
‘bp_proc_create’ defined but not used [-Wunused-function]
 static int bp_proc_create(void)
            ^

Fix the warning and remove code complexity by remove whole code
inside #ifdef BP_PROC_SUPPORT.

Signed-off-by: SeongJae Park <sj38.park@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: unisys: virthba: add MODULE_DEVICE_TABLE

Add x86_cpu_id struct and call to MODULE_DEVICE_TABLE so this module
will be auto loaded on boot.

Signed-off-by: Ken Cox <jkc@redhat.com>
Tested-by: Ken Cox <jkc@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: fix copyright notices

This patch changes all of the various representations of the copyright symbol
to (C).

Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Fix typo in comment and printk

Fix spelling typo in comments and printk within unisys.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: unisys: Fix format string mismatch in virthba.c

Fix format string mismatch in info_proc_read() within virthba.c.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: keucr: fix sparse warning

fix sparse warning:
drivers/staging/keucr/smilmain.c:163:5: warning: symbol 'Check_D_MediaFmt' was not declared. Should it be static?

by declaring it in the right header. And remove duplication of definition of
SM_INIT

Signed-off-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: keucr: Fix warning about missing blank lines after declarations

This patches fixes two warnings of checkpatch.pl, both of the type
WARNING: Missing a blank line after declarations

Signed-off-by: Jonas Hahnfeld <hahnjo@hahnjo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: android: ion: duplicated clearing of sg_table

Because sg_table is cleared in sg_alloc_table via memset we don't need to use
kzalloc to allocate sg_table.

Signed-off-by: Gioh Kim <gioh.kim@lge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/android: Remove ram_console.h

ram_console is replaced by pstore and pstore_ram drivers,
and there is no code to use this head file, so remove it.

Signed-off-by: Bintian Wang <bintian.wang@huawei.com>
Acked-by: Colin Cross <ccross@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: gfp_mask should be of gfp_t type

Fixed the following sparse complaints:

drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:1039:61:
warning: restricted gfp_t degrades to integer
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:1092:61:
warning: restricted gfp_t degrades to integer
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:1136:58:
warning: incorrect type in argument 2 (different base types)
expected unsigned int [unsigned] gfp_mask
got restricted gfp_t [usertype] gfp_mask
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:1142:34:
warning: incorrect type in argument 3 (different base types)
expected unsigned int [unsigned] gfp_mask
got restricted gfp_t [usertype] gfp_mask
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:1147:58:
warning: incorrect type in argument 2 (different base types)
expected unsigned int [unsigned] gfp_mask
got restricted gfp_t [usertype] gfp_mask
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:1153:34:
warning: incorrect type in argument 3 (different base types)
expected unsigned int [unsigned] gfp_mask
got restricted gfp_t [usertype] gfp_mask

Signed-off-by: Fabio Falzoi <fabio.falzoi84@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: ops structs should be declared static

Fixed the following sparse complaints:

drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:549:22:
warning: symbol 'ldlm_srv_pool_ops' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:555:22:
warning: symbol 'ldlm_cli_pool_ops' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:681:1:
warning: symbol 'lprocfs_pool_state_fops' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:697:1:
warning: symbol 'lprocfs_grant_plan_fops' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:700:1:
warning: symbol 'lprocfs_wr_recalc_period' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:708:1:
warning: symbol 'lprocfs_recalc_period_fops' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:710:1:
warning: symbol 'ldlm_pool_u64_fops' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:711:1:
warning: symbol 'ldlm_pool_atomic_fops' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:712:1:
warning: symbol 'ldlm_pool_rw_atomic_fops' was not declared. Should it be static?
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:714:1:
warning: symbol 'lprocfs_grant_speed_fops' was not declared. Should it be static?

Signed-off-by: Fabio Falzoi <fabio.falzoi84@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Avoid using 0 instead of NULL

Fixed the following sparse complaints:

drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:755:9:
warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:757:9:
warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:758:9:
warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:759:9:
warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:760:9:
warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:762:9:
warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:764:9:
warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:765:9:
warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:766:9:
warning: Using plain integer as NULL pointer
drivers/staging/lustre/lustre/ptlrpc/../../lustre/ldlm/ldlm_pool.c:768:9:
warning: Using plain integer as NULL pointer

Signed-off-by: Fabio Falzoi <fabio.falzoi84@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: improve length checks in ioctls

We copy "hdr->ioc_len" from the user twice but we only verify that it's
within the limit on the first copy.  Otherwise we could read unmapped
memory and Oops.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Peng Tao <bergwolf@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging:lustre: use gfp_t instead of int

Fixed several sparse "warning: incorrect type" by replacing int
declarations with gfp_t

Signed-off-by: Vitaly Osipov <vitaly.osipov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: rename check_channel_list()

For aesthetics, rename this function so it has namespace associated
with the driver.

Also, change it's parameters. The cmd->chanlist and cmd->chanlist_len
are always passed, just pass the comedi_cmd pointer instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: remove 'ai_do' from private data

This member of the private data is set to the "mode" that the ai command
is operating in but nothing uses it. Just remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: absorb pci171x_ai_docmd_and_mode()

This helper function is called by the ai (*do_cmd) to setup and
start the async command based on the "mode" of operation. This
"mode" is determined by the cmd convert_src and start_src.

Move this "mode" determination and combine the functions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: cmd->scan_begin_src can only be TRIG_FOLLOW

In Step 1 of the (*do_cmdtest), the cmd->scan_begin_src is checked to
only allow TRIG_FOLLOW. The (*do_cmd) does not need to recheck this.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: remove 'ai_data_len' from private data

This member of the private data is just a copy of the s->async->prealloc_bufsz.
Use that instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: remove 'ai_scans' from private data

This member of the private data is just a copy of the cmd->stop_arg.
Use that instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: remove 'ai_n_chan' from private data

This member of the private data is just a copy of the cmd->chanlist_len.
Use that instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: remove 'ai_chanlist' from private data

This member of the private data is just a copy of the cmd->chanlist.
Use that instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: remove 'ai_flags' from private data

This member of the private data is just a copy of the cmd->flags. Use
that instead.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: remove 'ai_timer1' from private data

This member of the private data is just a copy of the cmd->convert_arg.
Use that instead and remove the unnecessary sanity checking since it
was already validated in the (*do_cmdtest).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adv_pci1710: remove 'ai_timer2' from private data

This member of the private data is set to 0 but it is never used. Just
remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: board does not have analog outputs

The board supported by this driver does not have analog outputs.  Remove
the subdevice init for it.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: board does not have analog inputs

This board does not have analog inputs.  Remove the subdevice init for
them.

Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: separate from addi_common.c

Using the addi-data "common" code in addi_apci_1564 introduces a lot of
bloat.  By separating this driver off from addi_common.c, a lot of the
common code can be stripped out.  This patch copies the code over from
addi_common.c, and removes the #include of the file.  The auto_attach
function from the common code replaces the one that was previously in this
driver, though renamed to that it stays within the namespace associated
with this driver, and the detach function has been renamed for this reason
as well.

Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci224: only calc the pacer divisors once

When the cmd->scan_begin_src == TRIG_TIMER the divisors needed to
generate the pacer time are calculated in the (*do_cmdtest) to
validate the cmd->scan_begin_arg. The core always does the
(*do_cmdtest) before the (*do_cmd) so there is no reason to recalc
the divisors.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci224: always cascade the 8254 timers

The 8254 timers are only used in this driver to generate the analog
output pacer. To simplify the driver, always cascade the timers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci224: factor out the 'start pacer' code

To clarify the analog output (*do_cmd) function, factor out the
code that starts the pacer.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci224: remove pci224_cascade_ns_to_timer()

This function is just a wrapper around i8253_cascade_ns_to_timer().
Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: tidy up apci1564_reset()

The reset function for this driver is a bit of a mess; clean it up to
ensure that it is functioning properly.

Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: remove unnecessary Step 2b test in (*do_cmdtest)

This test is unnecessary. It covers all the possible combinations of the
scan_end_src and stop_src triggers so the final else can never be reached.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas64: remove unnecessary Step 2b test in (*do_cmdtest)

This test is unnecessary. The cfc_check_trigger_src() in Step 1 ensures that
the trigger source is one of these values and Step 2 makes sure it's only one
of these values.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: clarify Step 2b of the (*do_cmdtest)

This step of the (*do_cmdtest) verifies that the selected trigger sources
are mutually compatible.

For this driver the scan_begin_src must be TRIG_FOLLOW or the same source
as the convert_src.

Simplify the logic to clarify this.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging: Use RCU_INIT_POINTER(x, NULL) in fwserial/fwserial.c

This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL)

The rcu_assign_pointer() ensures that the initialization of a structure
is carried out before storing a pointer to that structure.
And in the case of the NULL pointer, there is no structure to initialize.
So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL)

Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fwserial: (coding style) removing FSF postal address

Style-only modifications to make checkpatch.pl --file --strict a bit happier.
Removing FSF postal address from file top comment since it has changed in the
past, as stated by checkpatch.pl.

Signed-off-by: Dominique van den Broeck <domdevlin@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fwserial: (coding style) useless "extern" & space

Style-only modifications to make checkpatch.pl --file --strict a bit happier.
Removed useless "extern" in dma_fifo.h ;
Removed one supernumerary space.

Signed-off-by: Dominique van den Broeck <domdevlin@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fwserial: (coding style) if/else bracket matching

Style-only modifications to make checkpatch.pl --file --strict a bit happier.
if/else bracket matching (either none or both options should be bracketed).

Signed-off-by: Dominique van den Broeck <domdevlin@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fwserial: (coding style) open parenthesis alignments

Style-only modifications to make checkpatch.pl --file --strict a bit happier.
Open parenthesis alignments.

Signed-off-by: Dominique van den Broeck <domdevlin@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: remove sbe-2t3e3 driver.

It never really got cleaned up properly, and no one is working on it, so
remove it.  If someone wants to pick it up, this can be easily reverted.

Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_mio_common: clarify the cmd->start_arg validation and use

Clarify the cmd->start_arg validation in Step 3 of the (*do_cmdtest)
functions.

For a TRIG_INT source, the cmd->start_arg is actually the valid
trig_num that is used by the async (*inttrig) callbacks.

Refactor the (*inttrig) functions so that the cmd->start_arg is used
to check the trig_num instead of the open coded values.

For aesthetics, refactor the (*do_cmd) functions to use if/else instead
of the switch to handle the cmd->start_src.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: fix the cmd->start_arg use

For all cmd->start_src values this driver trivially validates that the
cmd->start_arg is 0.

For a TRIG_INT source, the cmd->start_arg is actually the valid trig_num
that is used by the async (*inttrig) callback.

Refactor the (*inttrig) functions so that the cmd->start_arg is used to
check the trig_num instead of the open coded values.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: fix the cmd->start_arg validation and use

This driver supports cmd->start_src values of TRIG_NOW, TRIG_EXT, and
TRIG_INT. Currently the cmd->start_arg is only validated for TRIG_NOW.

For TRIG_EXT sources, the cmd->start_src is driver specific. For a
TRIG_INT source, the cmd->start_arg is actually the valid trig_num
that is used by the async (*inttrig) callback.

The cmd->start_arg is currently not use in the driver. Just trivially
validate it to be 0 for all cmd->start_src values.

Refactor the (*inttrig) function so that the cmd->start_arg is used
to check the trig_num instead of the open coded value.

For aesthetics, remove some unnecessary comments in the (*do_cmd)
function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: fix the ai/ao cmd->start_arg use for TRIG_INT

For both ai and ao commands this driver supports a cmd->start_src of
TRIG_NOW or TRIG_INT. The cmd->start_arg is trivially validated for
both sources to be 0.

For a TRIG_INT source, the cmd->start_arg is actually the valid
trig_num that is used by the async (*inttrig) callback.

Refactor the (*inttrig) functions so that the cmd->start_arg is used
to check the trig_num instead of the open coded values.

For aesthetics, remove some unnecessary comments in the (*do_cmd)
functions.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s626: clarify the cmd->start_arg validation and use

This driver supports a cmd->start_src of TRIG_NOW, TRIG_INT or TRIG_EXT.

Clarify the cmd->start_arg validation in Step 3 of the (*do_cmdtest).

For a TRIG_INT source, the cmd->start_arg is actually the valid
trig_num that is used by the async (*inttrig) callback.

Refactor the (*inttrig) function so that the cmd->start_arg is used
to check the trig_num instead of the open coded value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmuio: fix the cmd->start_arg use for TRIG_INT

This driver supports a cmd->start_src of TRIG_NOW or TRIG_INT. The
cmd->start_arg is trivially validated for both sources to be 0.

For a TRIG_INT source, the cmd->start_arg is actually the valid
trig_num that is used by the async (*inttrig) callback.

Refactor the (*inttrig) function so that the cmd->start_arg is used
to check the trig_num instead of the open coded value.

For aesthetics, refactor the (*do_cmd) to use if/else instead if the
switch when handling the cmd->start_src.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcmmio: fix the cmd->start_arg use for TRIG_INT

This driver supports a cmd->start_src of TRIG_NOW or TRIG_INT. The
cmd->start_arg is trivially validated for both sources to be 0.

For a TRIG_INT source, the cmd->start_arg is actually the valid
trig_num that is used by the async (*inttrig) callback.

Refactor the (*inttrig) function so that the cmd->start_arg is used
to check the trig_num instead of the open coded value.

For aesthetics, refactor the (*do_cmd) to use if/else instead if the
switch when handling the cmd->start_src.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc: clarify the cmd->start_arg validation

This driver supports cmd->start_src sources of TRIG_NOW and TRIG_EXT.
Refactor the (*do_cmdtest) to clarify the trivial validation of the
cmd->start_arg.

This also fixes a bug, the cmd->start_src has the trigger not the
cmd->start_arg.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_tiocmd: clarify the cmd->start_arg validation and use

This driver supportes cmd->start_src sources of TRIG_NOW, TRIG_INT, TRIG_OTHER,
and TRIG_EXT. Refactor the (*do_cmdtest) to clarify the trivial validation of
the cmd->start_arg. For a TRIG_INT source, the cmd->start_arg is actually the
valid trig_num that is passed to the async (*inttrig) callback.

Refactor the (*inttrig) function so that the cmd->start_arg is used to check
the trig_num instead of the open coded value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_pcidio: fix the cmd->start_arg use for TRIG_INT

This driver only a cmd->start_src of TRIG_NOW or TRIG_INT. The cmd->start_arg
is trivially validated for both sources to be 0. For a TRIG_INT source, the
cmd->start_arg is actually the valid trig_num that is passed to the async
(*inttrig) callback.

Refactor the (*inttrig) function so that the cmd->start_arg is used to check
the trig_num instead of the open coded value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: me4000: validate the cmd->start_arg

The cmd->start_arg should be trivially validated in Step 3 of the
(*do_cmdtest) functions. Add the necessary code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: gsc_hpdi: validate the cmd->start_arg

The cmd->start_arg should be trivially validated in Step 3 of the
(*do_cmdtest) functions. Add the necessary code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: dt282x: fix the ao cmd->start_arg use for TRIG_INT

This driver only supports a cmd->start_src of TRIG_INT for ao commands. The
cmd->start_arg is trivially validated to be 0. For TRIG_INT source, the
cmd->start_arg is actually the valid trig_num that is passed to the async
(*inttrig) callback.

Refactor the (*inttrig) function so that the cmd->start_arg is used to check
the trig_num instead of the open coded value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas64: validate the ai/ao cmd->start_arg

The cmd->start_arg should be trivially validated in Step 3 of the
(*do_cmdtest) functions. Add the necessary code.

For the analog output, a cmd->start_src of TRIG_NOW and TRIG_INT is
supported. For both sources the cmd->start_arg is validated to be 0.
For a TRIG_INT source, the cmd->start_Arg is actually the valid trig_num
that is passed to the async (*inttrig) callback.

Refactor the (*inttrig) function so that the cmd->start_arg is used to
check the trig_num instead of the open coded value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas: fix the ao cmd->start_arg use for TRIG_INT

This driver only supports a cmd->start_src of TRIG_INT for ai commands. The
cmd->start_arg is trivially validated to be 0. For TRIG_INT source, the
cmd->start_arg is actually the valid trig_num that is passed to the async
(*inttrig) callback.

Refactor the (*inttrig) function so that the cmd->start_arg is used to check
the trig_num instead of the open coded value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas: clarify the ai cmd->start_arg validation

This driver supports two cmd->start_src values, TRIG_NOW and TRIG_EXT.

For aesthetics, replace the default case when validating the cmd->start_arg
with the proper case statement.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>