Kumar, Mahesh [Thu, 1 Jun 2017 05:59:18 +0000 (11:29 +0530)]
drm/i915/skl: New ddb allocation algorithm
This patch implements new DDB allocation algorithm as per HW team
recommendation. This algo takecare of scenario where we allocate less DDB
for the planes with lower relative pixel rate, but they require more DDB
to work.
It also takes care of enabling same watermark level for each
plane in crtc, for efficient power saving.
Changes since v1:
- Rebase on top of Paulo's patch series
Changes since v2:
- Fix the for loop condition to enable WM
Changes since v3:
- Fix crash in cursor i-g-t reported by Maarten
- Rebase after addressing Paulo's comments
- Few other ULT fixes
Changes since v4:
- Rebase on drm-tip
- Added separate function to enable WM levels
Changes since v5:
- Fix a crash identified in skl-6770HQ system
Changes since v6:
- Address review comments from Matt
Changes since v7:
- Fix failure return in skl_compute_plane_wm (Matt)
- fix typo
Changes since v8:
- Always check cursor wm enable irrespective of total_data_rate
Changes since v9:
- fix typo
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170601055918.4601-1-mahesh1.kumar@intel.com
Maarten Lankhorst [Wed, 31 May 2017 15:42:36 +0000 (17:42 +0200)]
drm/i915: Always recompute watermarks when distrust_bios_wm is set, v2.
On some systems there can be a race condition in which no crtc state is
added to the first atomic commit. This results in all crtc's having a
null DDB allocation, causing a FIFO underrun on any update until the
first modeset.
Changes since v1:
- Do not take the connection_mutex, this is already done below.
Reported-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Inspired-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes:
98d39494d375 ("drm/i915/gen9: Compute DDB allocation at atomic
check time (v4)")
Cc: <stable@vger.kernel.org> # v4.8+
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170531154236.27180-1-maarten.lankhorst@linux.intel.com
Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Imre Deak [Tue, 2 May 2017 12:04:09 +0000 (15:04 +0300)]
drm/i915: Prevent the system suspend complete optimization
Since
commit
bac2a909a096c9110525c18cbb8ce73c660d5f71
Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Date: Wed Jan 21 02:17:42 2015 +0100
PCI / PM: Avoid resuming PCI devices during system suspend
PCI devices will default to allowing the system suspend complete
optimization where devices are not woken up during system suspend if
they were already runtime suspended. This however breaks the i915/HDA
drivers for two reasons:
- The i915 driver has system suspend specific steps that it needs to
run, that bring the device to a different state than its runtime
suspended state.
- The HDA driver's suspend handler requires power that it will request
from the i915 driver's power domain handler. This in turn requires the
i915 driver to runtime resume itself, but this won't be possible if the
suspend complete optimization is in effect: in this case the i915
runtime PM is disabled and trying to get an RPM reference returns
-EACCESS.
Solve this by requiring the PCI/PM core to resume the device during
system suspend which in effect disables the suspend complete optimization.
Regardless of the above commit the optimization stayed disabled for DRM
devices until
commit
d14d2a8453d650bea32a1c5271af1458cd283a0f
Author: Lukas Wunner <lukas@wunner.de>
Date: Wed Jun 8 12:49:29 2016 +0200
drm: Remove dev_pm_ops from drm_class
so this patch is in practice a fix for this commit. Another reason for
the bug staying hidden for so long is that the optimization for a device
is disabled if it's disabled for any of its children devices. i915 may
have a backlight device as its child which doesn't support runtime PM
and so doesn't allow the optimization either. So if this backlight
device got registered the bug stayed hidden.
Credits to Marta, Tomi and David who enabled pstore logging,
that caught one instance of this issue across a suspend/
resume-to-ram and Ville who rememberd that the optimization was enabled
for some devices at one point.
The first WARN triggered by the problem:
[ 6250.746445] WARNING: CPU: 2 PID: 17384 at drivers/gpu/drm/i915/intel_runtime_pm.c:2846 intel_runtime_pm_get+0x6b/0xd0 [i915]
[ 6250.746448] pm_runtime_get_sync() failed: -13
[ 6250.746451] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul
snd_hda_codec_realtek snd_hda_codec_generic ghash_clmulni_intel e1000e snd_hda_codec snd_hwdep snd_hda_core ptp mei_me pps_core snd_pcm lpc_ich mei prime_
numbers i2c_hid i2c_designware_platform i2c_designware_core [last unloaded: i915]
[ 6250.746512] CPU: 2 PID: 17384 Comm: kworker/u8:0 Tainted: G U W 4.11.0-rc5-CI-CI_DRM_334+ #1
[ 6250.746515] Hardware name: /NUC5i5RYB, BIOS RYBDWi35.86A.0362.2017.0118.0940 01/18/2017
[ 6250.746521] Workqueue: events_unbound async_run_entry_fn
[ 6250.746525] Call Trace:
[ 6250.746530] dump_stack+0x67/0x92
[ 6250.746536] __warn+0xc6/0xe0
[ 6250.746542] ? pci_restore_standard_config+0x40/0x40
[ 6250.746546] warn_slowpath_fmt+0x46/0x50
[ 6250.746553] ? __pm_runtime_resume+0x56/0x80
[ 6250.746584] intel_runtime_pm_get+0x6b/0xd0 [i915]
[ 6250.746610] intel_display_power_get+0x1b/0x40 [i915]
[ 6250.746646] i915_audio_component_get_power+0x15/0x20 [i915]
[ 6250.746654] snd_hdac_display_power+0xc8/0x110 [snd_hda_core]
[ 6250.746661] azx_runtime_resume+0x218/0x280 [snd_hda_intel]
[ 6250.746667] pci_pm_runtime_resume+0x76/0xa0
[ 6250.746672] __rpm_callback+0xb4/0x1f0
[ 6250.746677] ? pci_restore_standard_config+0x40/0x40
[ 6250.746682] rpm_callback+0x1f/0x80
[ 6250.746686] ? pci_restore_standard_config+0x40/0x40
[ 6250.746690] rpm_resume+0x4ba/0x740
[ 6250.746698] __pm_runtime_resume+0x49/0x80
[ 6250.746703] pci_pm_suspend+0x57/0x140
[ 6250.746709] dpm_run_callback+0x6f/0x330
[ 6250.746713] ? pci_pm_freeze+0xe0/0xe0
[ 6250.746718] __device_suspend+0xf9/0x370
[ 6250.746724] ? dpm_watchdog_set+0x60/0x60
[ 6250.746730] async_suspend+0x1a/0x90
[ 6250.746735] async_run_entry_fn+0x34/0x160
[ 6250.746741] process_one_work+0x1f2/0x6d0
[ 6250.746749] worker_thread+0x49/0x4a0
[ 6250.746755] kthread+0x107/0x140
[ 6250.746759] ? process_one_work+0x6d0/0x6d0
[ 6250.746763] ? kthread_create_on_node+0x40/0x40
[ 6250.746768] ret_from_fork+0x2e/0x40
[ 6250.746778] ---[ end trace
102a62fd2160f5e6 ]---
v2:
- Use the new pci_dev->needs_resume flag, to avoid any overhead during
the ->pm_prepare hook. (Rafael)
v3:
- Update commit message to reference the actual regressing commit.
(Lukas)
v4:
- Rebase on v4 of patch 1/2.
Fixes:
d14d2a8453d6 ("drm: Remove dev_pm_ops from drm_class")
References: https://bugs.freedesktop.org/show_bug.cgi?id=100378
References: https://bugs.freedesktop.org/show_bug.cgi?id=100770
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: linux-pci@vger.kernel.org
Cc: <stable@vger.kernel.org> # v4.10.x: 4d071c3 - PCI/PM: Add needs_resume flag
Cc: <stable@vger.kernel.org> # v4.10.x
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-and-tested-by: Marta Lofstedt <marta.lofstedt@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1493726649-32094-2-git-send-email-imre.deak@intel.com
Michel Thierry [Wed, 31 May 2017 00:05:46 +0000 (17:05 -0700)]
drm/i915/guc: Fix doorbell id selection
We are passing parameters in the wrong order to find next zero bit, and
when it doesn't find anything it returns size (offset in the code), which
is always zero.
For reference the function is defined as:
find_next_bit( *addr, size, offset )
The incorrect parameter order was added by commit
abddffdf3620e
("drm/i915/guc: Sanitize GuC client initialization"). Luckily, currently
we only use a single guc client and a single doorbell, which happens to be
zero; therefore it isn't necessary to backport this fix (which would be for
v4.12).
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170531000546.30762-1-michel.thierry@intel.com
Nagaraju, Vathsala [Thu, 25 May 2017 16:43:29 +0000 (22:13 +0530)]
drm/i915/psr: disable psr2 for resolution greater than 32X20
psr1 is also disabled for panel resolution greater than 32X20.
Added psr2 check to disable only for psr2 panels having resolution
greater than 32X20.
issue was introduced by
commit-id : "
acf45d11050abd751dcec986ab121cb2367dcbba"
commit message: "PSR2 is restricted to work with panel resolutions
upto 3200x2000, move the check to intel_psr_match_conditions and fully
block psr."
v2: (Rodrigo)
Add previous commit details which introduced the issue
Fixes:
acf45d11050a ("drm/i915/psr: disable psr2 for resolution greater than 32X20")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Yaroslav Shabalin <yaroslav.shabalin@gmail.com>
Reported-by: Yaroslav Shabalin <yaroslav.shabalin@gmail.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: vathsala nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/49935bdff896ee3140bed471012b9f9110a863a4.1495729964.git.vathsala.nagaraju@intel.com
Chris Wilson [Tue, 30 May 2017 12:13:33 +0000 (13:13 +0100)]
drm/i915: Hold a wakeref for probing the ring registers
Allow intel_engine_is_idle() to be called outside of the GT wakeref by
acquiring the device runtime pm for ourselves. This allows the function
to act as check after we assume the engine is idle and we release the GT
wakeref held whilst we have requests. At the moment, we do not call it
outside of an awake context but taking the wakeref as required makes it
more convenient to use for quick debugging in future.
[ 2613.401647] RPM wakelock ref not held during HW access
[ 2613.401684] ------------[ cut here ]------------
[ 2613.401720] WARNING: CPU: 5 PID: 7739 at drivers/gpu/drm/i915/intel_drv.h:1787 gen6_read32+0x21f/0x2b0 [i915]
[ 2613.401731] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mii mei_me lpc_ich mei prime_numbers [last unloaded: i915]
[ 2613.401823] CPU: 5 PID: 7739 Comm: drv_missed_irq Tainted: G U 4.12.0-rc2-CI-CI_DRM_421+ #1
[ 2613.401825] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016
[ 2613.401840] task:
ffff880409e3a740 task.stack:
ffffc900084dc000
[ 2613.401861] RIP: 0010:gen6_read32+0x21f/0x2b0 [i915]
[ 2613.401863] RSP: 0018:
ffffc900084dfce8 EFLAGS:
00010292
[ 2613.401869] RAX:
000000000000002a RBX:
ffff8804016a8000 RCX:
0000000000000006
[ 2613.401871] RDX:
0000000000000006 RSI:
ffffffff81cbf2d9 RDI:
ffffffff81c9e3a7
[ 2613.401874] RBP:
ffffc900084dfd18 R08:
ffff880409e3afc8 R09:
0000000000000000
[ 2613.401877] R10:
000000008a1c483f R11:
0000000000000000 R12:
000000000000209c
[ 2613.401879] R13:
0000000000000001 R14:
ffff8804016a8000 R15:
ffff8804016ac150
[ 2613.401882] FS:
00007f39ef3dd8c0(0000) GS:
ffff88041fb40000(0000) knlGS:
0000000000000000
[ 2613.401885] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 2613.401887] CR2:
00000000023717c8 CR3:
00000002e7b34000 CR4:
00000000001406e0
[ 2613.401889] Call Trace:
[ 2613.401912] intel_engine_is_idle+0x76/0x90 [i915]
[ 2613.401931] i915_gem_wait_for_idle+0xe6/0x1e0 [i915]
[ 2613.401951] fault_irq_set+0x40/0x90 [i915]
[ 2613.401970] i915_ring_test_irq_set+0x42/0x50 [i915]
[ 2613.401976] simple_attr_write+0xc7/0xe0
[ 2613.401981] full_proxy_write+0x4f/0x70
[ 2613.401987] __vfs_write+0x23/0x120
[ 2613.401992] ? rcu_read_lock_sched_held+0x75/0x80
[ 2613.401996] ? rcu_sync_lockdep_assert+0x2a/0x50
[ 2613.401999] ? __sb_start_write+0xfa/0x1f0
[ 2613.402004] vfs_write+0xc5/0x1d0
[ 2613.402008] ? trace_hardirqs_on_caller+0xe7/0x1c0
[ 2613.402013] SyS_write+0x44/0xb0
[ 2613.402020] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 2613.402022] RIP: 0033:0x7f39eded6670
[ 2613.402025] RSP: 002b:
00007fffdcdcb1a8 EFLAGS:
00000246 ORIG_RAX:
0000000000000001
[ 2613.402030] RAX:
ffffffffffffffda RBX:
ffffffff81470203 RCX:
00007f39eded6670
[ 2613.402033] RDX:
0000000000000001 RSI:
000000000041bc33 RDI:
0000000000000006
[ 2613.402036] RBP:
ffffc900084dff88 R08:
00007f39ef3dd8c0 R09:
0000000000000001
[ 2613.402038] R10:
0000000000000000 R11:
0000000000000246 R12:
000000000041bc33
[ 2613.402041] R13:
0000000000000006 R14:
0000000000000000 R15:
0000000000000000
[ 2613.402046] ? __this_cpu_preempt_check+0x13/0x20
[ 2613.402052] Code: 01 9b fa e0 0f ff e9 28 fe ff ff 80 3d 6a dd 0e 00 00 0f 85 29 fe ff ff 48 c7 c7 48 19 29 a0 c6 05 56 dd 0e 00 01 e8 da 9a fa e0 <0f> ff e9 0f fe ff ff b9 01 00 00 00 ba 01 00 00 00 44 89 e6 48
[ 2613.402199] ---[ end trace
31f0cfa93ab632bf ]---
Fixes:
5400367a864d ("drm/i915: Ensure the engine is idle before manually changing HWS")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170530121334.17364-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Chris Wilson [Tue, 30 May 2017 12:13:32 +0000 (13:13 +0100)]
drm/i915: Short-circuit i915_gem_wait_for_idle() if already idle
If the device is asleep (no GT wakeref), we know the GPU is already idle.
If we add an early return, we can avoid touching registers and checking
hw state outside of the assumed GT wakelock. This prevents causing such
errors whilst debugging:
[ 2613.401647] RPM wakelock ref not held during HW access
[ 2613.401684] ------------[ cut here ]------------
[ 2613.401720] WARNING: CPU: 5 PID: 7739 at drivers/gpu/drm/i915/intel_drv.h:1787 gen6_read32+0x21f/0x2b0 [i915]
[ 2613.401731] Modules linked in: snd_hda_intel i915 vgem snd_hda_codec_hdmi x86_pkg_temp_thermal intel_powerclamp snd_hda_codec_realtek coretemp snd_hda_codec_generic crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm r8169 mii mei_me lpc_ich mei prime_numbers [last unloaded: i915]
[ 2613.401823] CPU: 5 PID: 7739 Comm: drv_missed_irq Tainted: G U 4.12.0-rc2-CI-CI_DRM_421+ #1
[ 2613.401825] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016
[ 2613.401840] task:
ffff880409e3a740 task.stack:
ffffc900084dc000
[ 2613.401861] RIP: 0010:gen6_read32+0x21f/0x2b0 [i915]
[ 2613.401863] RSP: 0018:
ffffc900084dfce8 EFLAGS:
00010292
[ 2613.401869] RAX:
000000000000002a RBX:
ffff8804016a8000 RCX:
0000000000000006
[ 2613.401871] RDX:
0000000000000006 RSI:
ffffffff81cbf2d9 RDI:
ffffffff81c9e3a7
[ 2613.401874] RBP:
ffffc900084dfd18 R08:
ffff880409e3afc8 R09:
0000000000000000
[ 2613.401877] R10:
000000008a1c483f R11:
0000000000000000 R12:
000000000000209c
[ 2613.401879] R13:
0000000000000001 R14:
ffff8804016a8000 R15:
ffff8804016ac150
[ 2613.401882] FS:
00007f39ef3dd8c0(0000) GS:
ffff88041fb40000(0000) knlGS:
0000000000000000
[ 2613.401885] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 2613.401887] CR2:
00000000023717c8 CR3:
00000002e7b34000 CR4:
00000000001406e0
[ 2613.401889] Call Trace:
[ 2613.401912] intel_engine_is_idle+0x76/0x90 [i915]
[ 2613.401931] i915_gem_wait_for_idle+0xe6/0x1e0 [i915]
[ 2613.401951] fault_irq_set+0x40/0x90 [i915]
[ 2613.401970] i915_ring_test_irq_set+0x42/0x50 [i915]
[ 2613.401976] simple_attr_write+0xc7/0xe0
[ 2613.401981] full_proxy_write+0x4f/0x70
[ 2613.401987] __vfs_write+0x23/0x120
[ 2613.401992] ? rcu_read_lock_sched_held+0x75/0x80
[ 2613.401996] ? rcu_sync_lockdep_assert+0x2a/0x50
[ 2613.401999] ? __sb_start_write+0xfa/0x1f0
[ 2613.402004] vfs_write+0xc5/0x1d0
[ 2613.402008] ? trace_hardirqs_on_caller+0xe7/0x1c0
[ 2613.402013] SyS_write+0x44/0xb0
[ 2613.402020] entry_SYSCALL_64_fastpath+0x1c/0xb1
[ 2613.402022] RIP: 0033:0x7f39eded6670
[ 2613.402025] RSP: 002b:
00007fffdcdcb1a8 EFLAGS:
00000246 ORIG_RAX:
0000000000000001
[ 2613.402030] RAX:
ffffffffffffffda RBX:
ffffffff81470203 RCX:
00007f39eded6670
[ 2613.402033] RDX:
0000000000000001 RSI:
000000000041bc33 RDI:
0000000000000006
[ 2613.402036] RBP:
ffffc900084dff88 R08:
00007f39ef3dd8c0 R09:
0000000000000001
[ 2613.402038] R10:
0000000000000000 R11:
0000000000000246 R12:
000000000041bc33
[ 2613.402041] R13:
0000000000000006 R14:
0000000000000000 R15:
0000000000000000
[ 2613.402046] ? __this_cpu_preempt_check+0x13/0x20
[ 2613.402052] Code: 01 9b fa e0 0f ff e9 28 fe ff ff 80 3d 6a dd 0e 00 00 0f 85 29 fe ff ff 48 c7 c7 48 19 29 a0 c6 05 56 dd 0e 00 01 e8 da 9a fa e0 <0f> ff e9 0f fe ff ff b9 01 00 00 00 ba 01 00 00 00 44 89 e6 48
[ 2613.402199] ---[ end trace
31f0cfa93ab632bf ]---
Fixes:
25112b64b3d2 ("drm/i915: Wait for all engines to be idle as part of i915_gem_wait_for_idle()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170530121334.17364-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chuanxiao Dong [Sat, 27 May 2017 09:44:19 +0000 (17:44 +0800)]
drm/i915/gvt: Return -EIO if host GuC submission is enabled when loading GVT-g
Currently GVT-g cannot work properly when host GuC submission is
enabled, so make the driver loading failed in this case.
v2:
- use DRM_ERROR as it is a fatal message. (Chris)
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1495878259-7733-2-git-send-email-chuanxiao.dong@intel.com
Chuanxiao Dong [Sat, 27 May 2017 09:44:18 +0000 (17:44 +0800)]
drm/i915/gvt: Return -EIO if host enable_execlists not enabled when loading GVT-g
GVT-g relies on the enable_execlists parameter in i915. If this option
is not enabled for GVT-g, should return -EIO to make i915 driver loading
failed.
v2:
- Use DMR_ERROR as it is a fatal message. (Chris)
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chuanxiao Dong [Sat, 27 May 2017 09:44:17 +0000 (17:44 +0800)]
drm/i915/gvt: Add gvt options sanitize function
The intel_gvt_sanitize_options will sanitize the GVT related
options before doing initialize the GVT.
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Wed, 24 May 2017 16:26:53 +0000 (17:26 +0100)]
drm/i915: Remove toplevel struct_mutex locking from debugfs/i915_drop_caches
I have a plan to write a quick test to exercise concurrent usage of
i915_gem_shrink(), the simplest way looks to be to have multiple threads
using debugfs/i915_drop_caches. However, we currently take one lock over
the entire function, serialising the calls into i915_gem_shrink() so
reduce the lock coverage.
Testcase: igt/gem_shrink/reclaim
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170524162653.5446-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Chris Wilson [Thu, 25 May 2017 20:48:18 +0000 (21:48 +0100)]
drm/i915: Add kerneldoc to describe i915_gem_object.vma_list
Add kerneldoc for the vma_list stored on the i915_gem_object, in
particular, documenting the expected ordering of elements -- i.e. that
we do expect GGTT VMA first followed by the ppGTT VMA.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170525204818.12044-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Maarten Lankhorst [Mon, 1 May 2017 13:38:04 +0000 (15:38 +0200)]
drm/i915: Convert intel_sdvo connector properties to atomic.
SDVO was the last connector that's still using the legacy paths
for properties, and this is with a reason!
This connector implements a lot of properties dynamically,
and some of them shared with the digital connector state,
so sdvo_connector_state subclasses intel_digital_connector_state.
set_property had a lot of validation, but this is handled in the
drm core, so most of the validation can die off. The properties
are written right before enabling the connector, since there is no
good way to update the properties without crtc.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170501133804.8116-13-maarten.lankhorst@linux.intel.com
Maarten Lankhorst [Mon, 1 May 2017 13:38:03 +0000 (15:38 +0200)]
drm/i915: Handle force_audio correctly in intel_sdvo
Do the same as other connectors, attempt to detect hdmi audio in
the detect() callback, and only use the force_audio property as
override. Compute has_audio in pipe_config, and use that value
instead of the probed value directly.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170501133804.8116-12-maarten.lankhorst@linux.intel.com
Maarten Lankhorst [Mon, 1 May 2017 13:38:02 +0000 (15:38 +0200)]
drm/i915: Convert intel_hdmi connector properties to atomic
intel_hdmi supports 3 properties, force_audio, broadcast rgb and
scaling mode. The last one is only created for eDP, so the is_eDP
in set_property is not required.
panel fitting and broadcast rgb are straightforward and only requires
changing compute_config.
force_audio is also used to force DVI mode, which means changes to
compute_config and mode_valid. mode_valid is called with
connection_mutex held, so it can safely dereference connector->state.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170501133804.8116-11-maarten.lankhorst@linux.intel.com
Maarten Lankhorst [Mon, 1 May 2017 13:38:01 +0000 (15:38 +0200)]
drm/i915: Convert intel_dp properties to atomic, v2.
intel_dp supports 3 properties, scaling mode, broadcast rgb and
force_audio. intel_digital_connector handles the plumbing,
so we only have to hook this up in compute_config and init.
Changes since v1:
- Remove limited_color_range too, unused. (danvet)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170501133804.8116-10-maarten.lankhorst@linux.intel.com
Maarten Lankhorst [Mon, 1 May 2017 13:38:00 +0000 (15:38 +0200)]
drm/i915: Make intel_dp->has_audio reflect hw state only
Always detect if audio is available during edid detection.
With less magic switching it's easier to convert the dp connector
properties to atomic.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170501133804.8116-9-maarten.lankhorst@linux.intel.com
Maarten Lankhorst [Mon, 1 May 2017 13:37:59 +0000 (15:37 +0200)]
drm/i915: Convert LVDS connector properties to atomic.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170501133804.8116-8-maarten.lankhorst@linux.intel.com
Maarten Lankhorst [Mon, 1 May 2017 13:37:58 +0000 (15:37 +0200)]
drm/i915: Convert DSI connector properties to atomic.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170501133804.8116-7-maarten.lankhorst@linux.intel.com
Maarten Lankhorst [Mon, 1 May 2017 13:37:57 +0000 (15:37 +0200)]
drm/i915: Add plumbing for digital connector state, v3.
Some atomic properties are common between the various kinds of
connectors, for example a lot of them use panel fitting mode.
It makes sense to put a lot of it in a common place, so each
connector can use it while they're being converted.
Implement the properties required for the connectors:
- scaling mode property
- force audio property
- broadcast rgb
- aspect ratio
While at it, make clear that intel_digital_connector_atomic_get_property
is a hack that has to be removed when all connector properties
are converted to atomic.
Changes since v1:
- Scaling mode and aspect ratio are partly handled in core now.
Changes since v2:
- Split out the scaling mode / aspect ratio changes to a preparation
patch.
- Use mode_changed for panel fitter, changes to this property
are checked by fastset.
- Allowed_scaling_modes is removed, handled through core now.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170501133804.8116-6-maarten.lankhorst@linux.intel.com
Maarten Lankhorst [Mon, 1 May 2017 13:37:56 +0000 (15:37 +0200)]
drm/i915: Use per-connector scaling mode property
None of the intel connectors can use all types of scaling modes,
so only try the ones that are possible. This is another preparation
for connectors towards conversion to atomic.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170501133804.8116-5-maarten.lankhorst@linux.intel.com
[mlankhorst: Use renamed drm_connector_attach_scaling_mode_property function]
Maarten Lankhorst [Mon, 1 May 2017 13:37:55 +0000 (15:37 +0200)]
drm/i915: Use atomic scaling_mode instead of panel.fitting_mode
The first step in converting connector properties to atomic is
wiring up the atomic state. We're still not completely supoprting
the scaling mode in the atomic case, but this is the first step
towards it.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170501133804.8116-4-maarten.lankhorst@linux.intel.com
Kai Chen [Tue, 23 May 2017 21:58:12 +0000 (14:58 -0700)]
drm/i915: Remove decoupled MMIO code
This is a follow-up patch to the previous patch ([PATCH[1/2] drm/i915:
Disable decoupled MMIO) to remove the dead code for decoupled MMIO
implementation, as it won't be used any longer on GEN9LP.
Therefore, this patch reverts:
commit
85ee17ebeedd1af0dccd98f82ab4e644e29d84c0
Author: Praveen Paneri <praveen.paneri@intel.com>
Date: Tue Nov 15 22:49:20 2016 +0530
drm/i915/bxt: Broxton decoupled MMIO
Signed-off-by: Kai Chen <kai.chen@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170523215812.18328-3-kai.chen@intel.com
Kai Chen [Tue, 23 May 2017 21:58:11 +0000 (14:58 -0700)]
drm/i915: Disable decoupled MMIO
The decoupled MMIO feature doesn't work as intended by HW team. Enabling
it with forcewake will only make debugging efforts more difficult, so
let's disable it.
Fixes:
85ee17ebeedd ("drm/i915/bxt: Broxton decoupled MMIO")
Cc: Zhe Wang <zhe1.wang@intel.com>
Cc: Praveen Paneri <praveen.paneri@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Kai Chen <kai.chen@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170523215812.18328-2-kai.chen@intel.com
Dave Airlie [Tue, 30 May 2017 05:54:15 +0000 (15:54 +1000)]
Backmerge tag 'v4.12-rc3' into drm-next
Linux 4.12-rc3
Daniel has requested this for some drm-intel-next work.
Dave Airlie [Tue, 30 May 2017 05:25:28 +0000 (15:25 +1000)]
Merge tag 'drm-intel-next-2017-05-29' of git://anongit.freedesktop.org/git/drm-intel into drm-next
More stuff for 4.13:
- skl+ wm fixes from Mahesh Kumar
- some refactor and tests for i915_sw_fence (Chris)
- tune execlist/scheduler code (Chris)
- g4x,g33 gpu reset improvements (Chris, Mika)
- guc code cleanup (Michal Wajdeczko, Michał Winiarski)
- dp aux backlight improvements (Puthikorn Voravootivat)
- buffer based guc/host communication (Michal Wajdeczko)
* tag 'drm-intel-next-2017-05-29' of git://anongit.freedesktop.org/git/drm-intel: (253 commits)
drm/i915: Update DRIVER_DATE to
20170529
drm/i915: Keep the forcewake timer alive for 1ms past the most recent use
drm/i915/guc: capture GuC logs if FW fails to load
drm/i915/guc: Introduce buffer based cmd transport
drm/i915/guc: Disable send function on fini
drm: Add definition for eDP backlight frequency
drm/i915: Drop AUX backlight enable check for backlight control
drm/i915: Consolidate #ifdef CONFIG_INTEL_IOMMU
drm/i915: Only GGTT vma may be pinned and prevent shrinking
drm/i915: Serialize GTT/Aperture accesses on BXT
drm/i915: Convert i915_gem_object_ops->flags values to use BIT()
drm/i915/selftests: Silence compiler warning in igt_ctx_exec
drm/i915/guc: Skip port assign on first iteration of GuC dequeue
drm/i915: Remove misleading comment in request_alloc
drm/i915/g33: Improve reset reliability
Revert "drm/i915: Restore lost "Initialized i915" welcome message"
drm/i915/huc: Update GLK HuC version
drm/i915: Check for allocation failure
drm/i915/guc: Remove action status and statistics from debugfs
drm/i915/g4x: Improve gpu reset reliability
...
Daniel Vetter [Mon, 29 May 2017 07:00:58 +0000 (09:00 +0200)]
drm/i915: Update DRIVER_DATE to
20170529
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Linus Torvalds [Mon, 29 May 2017 00:20:53 +0000 (17:20 -0700)]
Linux 4.12-rc3
Linus Torvalds [Sun, 28 May 2017 23:18:27 +0000 (16:18 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/evalenti/linux-soc-thermal
Pull thermal SoC management fixes from Eduardo Valentin:
- fixes to TI SoC driver, Broadcom, qoriq
- small sparse warning fix on thermal core
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
thermal: broadcom: ns-thermal: default on iProc SoCs
ti-soc-thermal: Fix a typo in a comment line
ti-soc-thermal: Delete error messages for failed memory allocations in ti_bandgap_build()
ti-soc-thermal: Use devm_kcalloc() in ti_bandgap_build()
thermal: core: make thermal_emergency_poweroff static
thermal: qoriq: remove useless call for of_thermal_get_trip_points()
Dave Airlie [Sun, 28 May 2017 20:04:39 +0000 (06:04 +1000)]
Merge tag 'drm-misc-next-2017-05-26' of git://anongit.freedesktop.org/git/drm-misc into drm-next
UAPI Changes:
- Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ defines to the UAPI (Robert)
Cross-subsystem Changes:
- Standardize sync_file.txt documentation format (Mauro)
Core Changes:
- Turf drm_[cm]alloc functions for kvmalloc alternatives (Michal)
- Add optional mode_valid() hook to crtc/encoder/bridge (Jose)
- Improve documentation around mode validation/alteration (Daniel)
- Reduce sync_file construction time by deferring name creation (Chris)
Driver Changes:
- pl111: Wire up the clock divider and add debugfs (Eric)
- various: Fix include notation and remove -Iinclude/drm (Masahiro)
- stm: Add Benjamin Gaignard and Vincent Abriou as STM maintainers (Vincent)
- various: Miscellaneous trivial fixes to pl111/stm/vgem/vc4
Cc: Michal Hocko <mhocko@suse.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Robert Foss <robert.foss@collabora.com>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
* tag 'drm-misc-next-2017-05-26' of git://anongit.freedesktop.org/git/drm-misc: (55 commits)
dma-buf/sync-file: Defer creation of sync_file->name
sync_file.txt: standardize document format
gpu: drm: gma500: remove two more dead variable
drm/doc: Clarify mode_fixup vs. atomic_check a bit more
drm/doc: Document adjusted/request modes a bit better
drm: Add crtc/encoder/bridge->mode_valid() callbacks
MAINTAINERS: update drm/stm maintainers list
drm/stm: ltdc: fix duplicated arguments
drm/pl111: Fix return value check in pl111_amba_probe()
drm/amd: include <linux/delay.h> instead of "linux/delay.h"
drm: Add DRM_MODE_ROTATE_ and DRM_MODE_REFLECT_ to UAPI
drm/vgem: Fix return value check in vgem_init()
drm/blend: Fix comment typ-o
drm/stm: remove unneeded -Iinclude/drm compiler flag
drm/vc4: fix include notation and remove -Iinclude/drm flag
drm/pl111: Add a debugfs node to dump our registers.
drm/pl111: make structure mode_config_funcs static
drm/pl111: make structure pl111_display_funcs static
drm/pl111: Register the clock divider and use it.
drm: drop drm_[cm]alloc* helpers
...
Linus Torvalds [Sat, 27 May 2017 16:39:09 +0000 (09:39 -0700)]
Merge tag 'tty-4.12-rc3' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some serial and tty fixes for 4.12-rc3. They are a bit bigger
than normal, which is why I had them bake in linux-next for a few
weeks and didn't send them to you for -rc2.
They revert a few of the serdev patches from 4.12-rc1, and bring
things back to how they were in 4.11, to try to make things a bit more
stable there. Rob and Johan both agree that this is the way forward,
so this isn't people squabbling over semantics. Other than that, just
a few minor serial driver fixes that people have had problems with.
All of these have been in linux-next for a few weeks with no reported
issues"
* tag 'tty-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: altera_uart: call iounmap() at driver remove
serial: imx: ensure UCR3 and UFCR are setup correctly
MAINTAINERS/serial: Change maintainer of jsm driver
serial: enable serdev support
tty/serdev: add serdev registration interface
serdev: Restore serdev_device_write_buf for atomic context
serial: core: fix crash in uart_suspend_port
tty: fix port buffer locking
tty: ehv_bytechan: clean up init error handling
serial: ifx6x60: fix use-after-free on module unload
serial: altera_jtaguart: adding iounmap()
serial: exar: Fix stuck MSIs
serial: efm32: Fix parity management in 'efm32_uart_console_get_options()'
serdev: fix tty-port client deregistration
Revert "tty_port: register tty ports with serdev bus"
drivers/tty: 8250: only call fintek_8250_probe when doing port I/O
Linus Torvalds [Sat, 27 May 2017 16:28:34 +0000 (09:28 -0700)]
Merge tag 'powerpc-4.12-4' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix running SPU programs on Cell, and a few other minor fixes.
Thanks to Alistair Popple, Jeremy Kerr, Michael Neuling, Nicholas
Piggin"
* tag 'powerpc-4.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Add PPC_FEATURE userspace bits for SCV and DARN instructions
powerpc/spufs: Fix hash faults for kernel regions
powerpc: Fix booting P9 hash with CONFIG_PPC_RADIX_MMU=N
powerpc/powernv/npu-dma.c: Fix opal_npu_destroy_context() call
selftests/powerpc: Fix TM resched DSCR test with some compilers
Linus Torvalds [Sat, 27 May 2017 16:17:58 +0000 (09:17 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A series of fixes for X86:
- The final fix for the end-of-stack issue in the unwinder
- Handle non PAT systems gracefully
- Prevent access to uninitiliazed memory
- Move early delay calaibration after basic init
- Fix Kconfig help text
- Fix a cross compile issue
- Unbreak older make versions"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/timers: Move simple_udelay_calibration past init_hypervisor_platform
x86/alternatives: Prevent uninitialized stack byte read in apply_alternatives()
x86/PAT: Fix Xorg regression on CPUs that don't support PAT
x86/watchdog: Fix Kconfig help text file path reference to lockup watchdog documentation
x86/build: Permit building with old make versions
x86/unwind: Add end-of-stack check for ftrace handlers
Revert "x86/entry: Fix the end of the stack for newly forked tasks"
x86/boot: Use CROSS_COMPILE prefix for readelf
Linus Torvalds [Sat, 27 May 2017 16:14:24 +0000 (09:14 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer fixlet from Thomas Gleixner:
"Silence dmesg spam by making the posix cpu timer printks depend on
print_fatal_signals"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-timers: Make signal printks conditional
Linus Torvalds [Sat, 27 May 2017 16:06:43 +0000 (09:06 -0700)]
Merge branch 'ras-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull RAS fixes from Thomas Gleixner:
"Two fixlets for RAS:
- Export memory_error() so the NFIT module can utilize it
- Handle memory errors in NFIT correctly"
* 'ras-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
acpi, nfit: Fix the memory error check in nfit_handle_mce()
x86/MCE: Export memory_error()
Linus Torvalds [Sat, 27 May 2017 16:02:41 +0000 (09:02 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf tooling fixes from Thomas Gleixner:
- Synchronization of tools and kernel headers
- A series of fixes for perf report addressing various failures:
* Handle invalid maps proper
* Plug a memory leak
* Handle frames and callchain order correctly
- Fixes for handling inlines and children mode
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/include: Sync kernel ABI headers with tooling headers
perf tools: Put caller above callee in --children mode
perf report: Do not drop last inlined frame
perf report: Always honor callchain order for inlined nodes
perf script: Add --inline option for debugging
perf report: Fix off-by-one for non-activation frames
perf report: Fix memory leak in addr2line when called by addr2inlines
perf report: Don't crash on invalid maps in `-g srcline` mode
Linus Torvalds [Sat, 27 May 2017 15:59:37 +0000 (08:59 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fix from Thomas Gleixner:
"A fix for a state leak which was introduced in the recent rework of
futex/rtmutex interaction"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex,rt_mutex: Fix rt_mutex_cleanup_proxy_lock()
Linus Torvalds [Sat, 27 May 2017 15:52:27 +0000 (08:52 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull kthread fix from Thomas Gleixner:
"A single fix which prevents a use after free when kthread fork fails"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kthread: Fix use-after-free if kthread fork fails
Linus Torvalds [Sat, 27 May 2017 15:30:30 +0000 (08:30 -0700)]
Merge tag 'trace-v4.12-rc2' of git://git./linux/kernel/git/rostedt/linux-trace
Pull ftrace fixes from Steven Rostedt:
"There's been a few memory issues found with ftrace.
One was simply a memory leak where not all was being freed that should
have been in releasing a file pointer on set_graph_function.
Then Thomas found that the ftrace trampolines were marked for
read/write as well as execute. To shrink the possible attack surface,
he added calls to set them to ro. Which also uncovered some other
issues with freeing module allocated memory that had its permissions
changed.
Kprobes had a similar issue which is fixed and a selftest was added to
trigger that issue again"
* tag 'trace-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
x86/ftrace: Make sure that ftrace trampolines are not RWX
x86/mm/ftrace: Do not bug in early boot on irqs_disabled in cpu_flush_range()
selftests/ftrace: Add a testcase for many kprobe events
kprobes/x86: Fix to set RWX bits correctly before releasing trampoline
ftrace: Fix memory leak in ftrace_graph_release()
Thomas Gleixner [Thu, 25 May 2017 08:57:51 +0000 (10:57 +0200)]
x86/ftrace: Make sure that ftrace trampolines are not RWX
ftrace use module_alloc() to allocate trampoline pages. The mapping of
module_alloc() is RWX, which makes sense as the memory is written to right
after allocation. But nothing makes these pages RO after writing to them.
Add proper set_memory_rw/ro() calls to protect the trampolines after
modification.
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1705251056410.1862@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Steven Rostedt (VMware) [Fri, 26 May 2017 14:14:11 +0000 (10:14 -0400)]
x86/mm/ftrace: Do not bug in early boot on irqs_disabled in cpu_flush_range()
With function tracing starting in early bootup and having its trampoline
pages being read only, a bug triggered with the following:
kernel BUG at arch/x86/mm/pageattr.c:189!
invalid opcode: 0000 [#1] SMP
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 4.12.0-rc2-test+ #3
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
task:
ffffffffb4222500 task.stack:
ffffffffb4200000
RIP: 0010:change_page_attr_set_clr+0x269/0x302
RSP: 0000:
ffffffffb4203c88 EFLAGS:
00010046
RAX:
0000000000000046 RBX:
0000000000000000 RCX:
00000001b6000000
RDX:
ffffffffb4203d40 RSI:
0000000000000000 RDI:
ffffffffb4240d60
RBP:
ffffffffb4203d18 R08:
00000001b6000000 R09:
0000000000000001
R10:
ffffffffb4203aa8 R11:
0000000000000003 R12:
ffffffffc029b000
R13:
ffffffffb4203d40 R14:
0000000000000001 R15:
0000000000000000
FS:
0000000000000000(0000) GS:
ffff9a639ea00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffff9a636b384000 CR3:
00000001ea21d000 CR4:
00000000000406b0
Call Trace:
change_page_attr_clear+0x1f/0x21
set_memory_ro+0x1e/0x20
arch_ftrace_update_trampoline+0x207/0x21c
? ftrace_caller+0x64/0x64
? 0xffffffffc029b000
ftrace_startup+0xf4/0x198
register_ftrace_function+0x26/0x3c
function_trace_init+0x5e/0x73
tracer_init+0x1e/0x23
tracing_set_tracer+0x127/0x15a
register_tracer+0x19b/0x1bc
init_function_trace+0x90/0x92
early_trace_init+0x236/0x2b3
start_kernel+0x200/0x3f5
x86_64_start_reservations+0x29/0x2b
x86_64_start_kernel+0x17c/0x18f
secondary_startup_64+0x9f/0x9f
? secondary_startup_64+0x9f/0x9f
Interrupts should not be enabled at this early in the boot process. It is
also fine to leave interrupts enabled during this time as there's only one
CPU running, and on_each_cpu() means to only run on the current CPU.
If early_boot_irqs_disabled is set, it is safe to run cpu_flush_range() with
interrupts disabled. Don't trigger a BUG_ON() in that case.
Link: http://lkml.kernel.org/r/20170526093717.0be3b849@gandalf.local.home
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Masami Hiramatsu [Fri, 26 May 2017 04:44:54 +0000 (13:44 +0900)]
selftests/ftrace: Add a testcase for many kprobe events
Add a testcase to test kprobes via ftrace interface
with many concurrent kprobe events.
This tries to add many kprobe events (up to 256) on
kernel functions. To avoid making ftrace-based
kprobes (kprobes on fentry), it skips first N bytes
(on x86 N=5, on ppc or arm N=4) of function entry.
After that, it enables all those events, disable it,
and remove it.
Since the unoptimization buffer reclaiming will
be delayed, after removing events, it will wait
enough time.
Link: http://lkml.kernel.org/r/149577388470.11702.11832460851769204511.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Masami Hiramatsu [Thu, 25 May 2017 10:38:17 +0000 (19:38 +0900)]
kprobes/x86: Fix to set RWX bits correctly before releasing trampoline
Fix kprobes to set(recover) RWX bits correctly on trampoline
buffer before releasing it. Releasing readonly page to
module_memfree() crash the kernel.
Without this fix, if kprobes user register a bunch of kprobes
in function body (since kprobes on function entry usually
use ftrace) and unregister it, kernel hits a BUG and crash.
Link: http://lkml.kernel.org/r/149570868652.3518.14120169373590420503.stgit@devbox
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes:
d0381c81c2f7 ("kprobes/x86: Set kprobes pages read-only")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Luis Henriques [Thu, 25 May 2017 15:20:38 +0000 (16:20 +0100)]
ftrace: Fix memory leak in ftrace_graph_release()
ftrace_hash is being kfree'ed in ftrace_graph_release(), however the
->buckets field is not. This results in a memory leak that is easily
captured by kmemleak:
unreferenced object 0xffff880038afe000 (size 8192):
comm "trace-cmd", pid 238, jiffies
4294916898 (age 9.736s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
ffffffff815f561e>] kmemleak_alloc+0x4e/0xb0
[<
ffffffff8113964d>] __kmalloc+0x12d/0x1a0
[<
ffffffff810bf6d1>] alloc_ftrace_hash+0x51/0x80
[<
ffffffff810c0523>] __ftrace_graph_open.isra.39.constprop.46+0xa3/0x100
[<
ffffffff810c05e8>] ftrace_graph_open+0x68/0xa0
[<
ffffffff8114003d>] do_dentry_open.isra.1+0x1bd/0x2d0
[<
ffffffff81140df7>] vfs_open+0x47/0x60
[<
ffffffff81150f95>] path_openat+0x2a5/0x1020
[<
ffffffff81152d6a>] do_filp_open+0x8a/0xf0
[<
ffffffff811411df>] do_sys_open+0x12f/0x200
[<
ffffffff811412ce>] SyS_open+0x1e/0x20
[<
ffffffff815fa6e0>] entry_SYSCALL_64_fastpath+0x13/0x94
[<
ffffffffffffffff>] 0xffffffffffffffff
Link: http://lkml.kernel.org/r/20170525152038.7661-1-lhenriques@suse.com
Cc: stable@vger.kernel.org
Fixes:
b9b0c831bed2 ("ftrace: Convert graph filter to use hash tables")
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Linus Torvalds [Fri, 26 May 2017 23:45:13 +0000 (16:45 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input layer fixes from Dmitry Torokhov:
"Just a few fixups to a couple of drivers"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elan_i2c - ignore signals when finishing updating firmware
Input: elan_i2c - clear INT before resetting controller
Input: atmel_mxt_ts - add T100 as a readable object
Input: edt-ft5x06 - increase allowed data range for threshold parameter
Linus Torvalds [Fri, 26 May 2017 21:02:30 +0000 (14:02 -0700)]
Merge tag 'led_fixes_for_4-12-rc3' of git://git./linux/kernel/git/j.anaszewski/linux-leds
Pull LED fix from Jacek Anaszewski:
"A single LED fix for 4.12-rc3.
leds-pca955x driver uses only i2c_smbus API and thus it should pass
I2C_FUNC_SMBUS_BYTE_DATA flag to i2c_check_functionality"
* tag 'led_fixes_for_4-12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: pca955x: Correct I2C Functionality
Linus Torvalds [Fri, 26 May 2017 20:51:01 +0000 (13:51 -0700)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix state pruning in bpf verifier wrt. alignment, from Daniel
Borkmann.
2) Handle non-linear SKBs properly in SCTP ICMP parsing, from Davide
Caratti.
3) Fix bit field definitions for rss_hash_type of descriptors in mlx5
driver, from Jesper Brouer.
4) Defer slave->link updates until bonding is ready to do a full commit
to the new settings, from Nithin Sujir.
5) Properly reference count ipv4 FIB metrics to avoid use after free
situations, from Eric Dumazet and several others including Cong Wang
and Julian Anastasov.
6) Fix races in llc_ui_bind(), from Lin Zhang.
7) Fix regression of ESP UDP encapsulation for TCP packets, from
Steffen Klassert.
8) Fix mdio-octeon driver Kconfig deps, from Randy Dunlap.
9) Fix regression in setting DSCP on ipv6/GRE encapsulation, from Peter
Dawson.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
ipv4: add reference counting to metrics
net: ethernet: ax88796: don't call free_irq without request_irq first
ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets
sctp: fix ICMP processing if skb is non-linear
net: llc: add lock_sock in llc_ui_bind to avoid a race condition
bonding: Don't update slave->link until ready to commit
test_bpf: Add a couple of tests for BPF_JSGE.
bpf: add various verifier test cases
bpf: fix wrong exposure of map_flags into fdinfo for lpm
bpf: add bpf_clone_redirect to bpf_helper_changes_pkt_data
bpf: properly reset caller saved regs after helper call and ld_abs/ind
bpf: fix incorrect pruning decision when alignment must be tracked
arp: fixed -Wuninitialized compiler warning
tcp: avoid fastopen API to be used on AF_UNSPEC
net: move somaxconn init from sysctl code
net: fix potential null pointer dereference
geneve: fix fill_info when using collect_metadata
virtio-net: enable TSO/checksum offloads for Q-in-Q vlans
be2net: Fix offload features for Q-in-Q packets
vlan: Fix tcp checksum offloads in Q-in-Q vlans
...
Linus Torvalds [Fri, 26 May 2017 19:13:08 +0000 (12:13 -0700)]
Merge tag 'xfs-4.12-fixes-2' of git://git./fs/xfs/xfs-linux
Pull XFS fixes from Darrick Wong:
"A few miscellaneous bug fixes & cleanups:
- Fix indlen block reservation accounting bug when splitting delalloc
extent
- Fix warnings about unused variables that appeared in -rc1.
- Don't spew errors when bmapping a local format directory
- Fix an off-by-one error in a delalloc eof assertion
- Make fsmap only return inode information for CAP_SYS_ADMIN
- Fix a potential mount time deadlock recovering cow extents
- Fix unaligned memory access in _btree_visit_blocks
- Fix various SEEK_HOLE/SEEK_DATA bugs"
* tag 'xfs-4.12-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Move handling of missing page into one place in xfs_find_get_desired_pgoff()
xfs: Fix off-by-in in loop termination in xfs_find_get_desired_pgoff()
xfs: Fix missed holes in SEEK_HOLE implementation
xfs: fix off-by-one on max nr_pages in xfs_find_get_desired_pgoff()
xfs: fix unaligned access in xfs_btree_visit_blocks
xfs: avoid mount-time deadlock in CoW extent recovery
xfs: only return detailed fsmap info if the caller has CAP_SYS_ADMIN
xfs: bad assertion for delalloc an extent that start at i_size
xfs: fix warnings about unused stack variables
xfs: BMAPX shouldn't barf on inline-format directories
xfs: fix indlen accounting error on partial delalloc conversion
Eric Dumazet [Thu, 25 May 2017 21:27:35 +0000 (14:27 -0700)]
ipv4: add reference counting to metrics
Andrey Konovalov reported crashes in ipv4_mtu()
I could reproduce the issue with KASAN kernels, between
10.246.7.151 and 10.246.7.152 :
1) 20 concurrent netperf -t TCP_RR -H 10.246.7.152 -l 1000 &
2) At the same time run following loop :
while :
do
ip ro add 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500
ip ro del 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500
done
Cong Wang attempted to add back rt->fi in commit
82486aa6f1b9 ("ipv4: restore rt->fi for reference counting")
but this proved to add some issues that were complex to solve.
Instead, I suggested to add a refcount to the metrics themselves,
being a standalone object (in particular, no reference to other objects)
I tried to make this patch as small as possible to ease its backport,
instead of being super clean. Note that we believe that only ipv4 dst
need to take care of the metric refcount. But if this is wrong,
this patch adds the basic infrastructure to extend this to other
families.
Many thanks to Julian Anastasov for reviewing this patch, and Cong Wang
for his efforts on this problem.
Fixes:
2860583fe840 ("ipv4: Kill rt->fi")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Uwe Kleine-König [Thu, 25 May 2017 20:54:53 +0000 (22:54 +0200)]
net: ethernet: ax88796: don't call free_irq without request_irq first
The function ax_init_dev (which is called only from the driver's .probe
function) calls free_irq in the error path without having requested the
irq in the first place. So drop the free_irq call in the error path.
Fixes:
825a2ff1896e ("AX88796 network driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peter Dawson [Thu, 25 May 2017 20:35:18 +0000 (06:35 +1000)]
ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets
This fix addresses two problems in the way the DSCP field is formulated
on the encapsulating header of IPv6 tunnels.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195661
1) The IPv6 tunneling code was manipulating the DSCP field of the
encapsulating packet using the 32b flowlabel. Since the flowlabel is
only the lower 20b it was incorrect to assume that the upper 12b
containing the DSCP and ECN fields would remain intact when formulating
the encapsulating header. This fix handles the 'inherit' and
'fixed-value' DSCP cases explicitly using the extant dsfield u8 variable.
2) The use of INET_ECN_encapsulate(0, dsfield) in ip6_tnl_xmit was
incorrect and resulted in the DSCP value always being set to 0.
Commit
90427ef5d2a4 ("ipv6: fix flow labels when the traffic class
is non-0") caused the regression by masking out the flowlabel
which exposed the incorrect handling of the DSCP portion of the
flowlabel in ip6_tunnel and ip6_gre.
Fixes:
90427ef5d2a4 ("ipv6: fix flow labels when the traffic class is non-0")
Signed-off-by: Peter Dawson <peter.a.dawson@boeing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Thu, 25 May 2017 17:14:56 +0000 (19:14 +0200)]
sctp: fix ICMP processing if skb is non-linear
sometimes ICMP replies to INIT chunks are ignored by the client, even if
the encapsulated SCTP headers match an open socket. This happens when the
ICMP packet is carried by a paged skb: use skb_header_pointer() to read
packet contents beyond the SCTP header, so that chunk header and initiate
tag are validated correctly.
v2:
- don't use skb_header_pointer() to read the transport header, since
icmp_socket_deliver() already puts these 8 bytes in the linear area.
- change commit message to make specific reference to INIT chunks.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
linzhang [Thu, 25 May 2017 06:07:18 +0000 (14:07 +0800)]
net: llc: add lock_sock in llc_ui_bind to avoid a race condition
There is a race condition in llc_ui_bind if two or more processes/threads
try to bind a same socket.
If more processes/threads bind a same socket success that will lead to
two problems, one is this action is not what we expected, another is
will lead to kernel in unstable status or oops(in my simple test case,
cause llc2.ko can't unload).
The current code is test SOCK_ZAPPED bit to avoid a process to
bind a same socket twice but that is can't avoid more processes/threads
try to bind a same socket at the same time.
So, add lock_sock in llc_ui_bind like others, such as llc_ui_connect.
Signed-off-by: Lin Zhang <xiaolou4617@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 26 May 2017 18:05:22 +0000 (11:05 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A collection of fixes that should go into this series. This contains:
- A set of NVMe fixes, pulled from Christoph. This includes a set of
fixes for the fiber channel bits from James Smart, rdma queue depth
fix from Marta, controller removal fixes from Ming, and some more
APST quirk updates from Andy.
- A blk-mq debugfs fix from Bart, fixing a problem with the
untangling of the sysfs and debugfs blk-mq bits that was added in
this series.
- Error code fix in add_partition() from Dan.
- A small series of fixes for the new blk-throttle code from Shaohua"
* 'for-linus' of git://git.kernel.dk/linux-block: (21 commits)
blk-mq: Only register debugfs attributes for blk-mq queues
nvme: Quirk APST on Intel 600P/P3100 devices
nvme: only setup block integrity if supported by the driver
nvme: replace is_flags field in nvme_ctrl_ops with a flags field
nvme-pci: consistencly use ctrl->device for logging
partitions/msdos: FreeBSD UFS2 file systems are not recognized
block: fix an error code in add_partition()
blk-throttle: force user to configure all settings for io.low
blk-throttle: respect 0 bps/iops settings for io.low
blk-throttle: output some debug info in trace
blk-throttle: add hierarchy support for latency target and idle time
nvme_fc: remove extra controller reference taken on reconnect
nvme_fc: correct nvme status set on abort
nvme_fc: set logging level on resets/deletes
nvme_fc: revise comment on teardown
nvme_fc: Support ctrl_loss_tmo
nvme_fc: get rid of local reconnect_delay
blk-mq: remove blk_mq_abort_requeue_list()
nvme: avoid to use blk_mq_abort_requeue_list()
nvme: use blk_mq_start_hw_queues() in nvme_kill_queues()
...
Linus Torvalds [Fri, 26 May 2017 17:51:18 +0000 (10:51 -0700)]
Merge tag 'pci-v4.12-fixes-1' of git://git./linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
- fix PCI_ENDPOINT build error (merged for v4.12)
- fix Switchtec driver (merged for v4.12)
- fix imx6 config read timeouts, fallout from changing to non-postable
reads
- add PM "needs_resume" flag for i915 suspend issue
* tag 'pci-v4.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/PM: Add needs_resume flag to avoid suspend complete optimization
PCI: imx6: Fix config read timeout handling
switchtec: Fix minor bug with partition ID register
switchtec: Use new cdev_device_add() helper function
PCI: endpoint: Make PCI_ENDPOINT depend on HAS_DMA
Linus Torvalds [Fri, 26 May 2017 16:35:22 +0000 (09:35 -0700)]
Merge tag 'ceph-for-4.12-rc3' of git://github.com/ceph/ceph-client
Pul ceph fixes from Ilya Dryomov:
"A bunch of make W=1 and static checker fixups, a RECONNECT_SEQ
messenger patch from Zheng and Luis' fallocate fix"
* tag 'ceph-for-4.12-rc3' of git://github.com/ceph/ceph-client:
ceph: check that the new inode size is within limits in ceph_fallocate()
libceph: cleanup old messages according to reconnect seq
libceph: NULL deref on crush_decode() error path
libceph: fix error handling in process_one_ticket()
libceph: validate blob_struct_v in process_one_ticket()
libceph: drop version variable from ceph_monmap_decode()
libceph: make ceph_msg_data_advance() return void
libceph: use kbasename() and kill ceph_file_part()
Linus Torvalds [Fri, 26 May 2017 16:05:35 +0000 (09:05 -0700)]
Merge tag 'mmc-v4.12-rc2' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"This contains fixes to make the WiFi work again for the ARM64 Hikey
board.
Together with a couple of DTS updates for the Hikey board we have also
extended the mmc pwrseq_simple, to support a new power-off-delay-us DT
property, as that was required to enable a graceful power off sequence
for the WiFi chip"
* tag 'mmc-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
arm64: dts: hikey: Fix WiFi support
arm64: dts: hi6220: Move board data from the dwmmc nodes to hikey dts
arm64: dts: hikey: Add the SYS_5V and the VDD_3V3 regulators
arm64: dts: hi6220: Move the fixed_5v_hub regulator to the hikey dts
arm64: dts: hikey: Add clock for the pmic mfd
mfd: dts: hi655x: Add clock binding for the pmic
mmc: pwrseq_simple: Parse DTS for the power-off-delay-us property
mmc: dt: pwrseq-simple: Invent power-off-delay-us
Linus Torvalds [Fri, 26 May 2017 16:03:09 +0000 (09:03 -0700)]
Merge tag 'sound-4.12-rc3' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This contains a few HD-audio device-specific quirks and an endianess
fix for USB-audio, as well as the update of quirk model list document.
All fixes are small and trivial.
The document update could have been postponed, but it's a good thing
for user and has absolutely zero risk of breakage, so included here"
* tag 'sound-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - apply STAC_9200_DELL_M22 quirk for Dell Latitude D430
ALSA: hda - Update the list of quirk models
ALSA: hda - Provide dual-codecs model option for a few Realtek codecs
ALSA: hda - Apply dual-codec quirk for MSI Z270-Gaming mobo
ALSA: hda - No loopback on ALC299 codec
ALSA: usb-audio: fix Amanero Combo384 quirk on big-endian hosts
Linus Torvalds [Fri, 26 May 2017 15:54:06 +0000 (08:54 -0700)]
Merge tag 'drm-fixes-for-v4.12-rc3' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Not a whole lot happening here, a set of amdgpu fixes and one core
deadlock fix, and some misc drivers fixes"
* tag 'drm-fixes-for-v4.12-rc3' of git://people.freedesktop.org/~airlied/linux:
drm/amdgpu: fix null point error when rmmod amdgpu.
drm/amd/powerplay: fix a signedness bugs
drm/amdgpu: fix NULL pointer panic of emit_gds_switch
drm/radeon: Unbreak HPD handling for r600+
drm/amd/powerplay/smu7: disable mclk switching for high refresh rates
drm/amd/powerplay/smu7: add vblank check for mclk switching (v2)
drm/radeon/ci: disable mclk switching for high refresh rates (v2)
drm/amdgpu/ci: disable mclk switching for high refresh rates (v2)
drm/amdgpu: fix fundamental suspend/resume issue
drm/gma500/psb: Actually use VBT mode when it is found
drm: Fix deadlock retry loop in page_flip_ioctl
drm: qxl: Delay entering atomic context during cursor update
drm/radeon: Fix oops upon driver load on PowerXpress laptops
Christoph Hellwig [Sat, 20 May 2017 16:59:54 +0000 (18:59 +0200)]
PCI/msi: fix the pci_alloc_irq_vectors_affinity stub
We need to return an error for any call that asks for MSI / MSI-X
vectors only, so that non-trivial fallback logic can work properly.
Also valid dev->irq and use the "correct" errno value based on feedback
from Linus.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Fixes:
aff17164 ("PCI: Provide sensible IRQ vector alloc/free routines")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jens Axboe [Fri, 26 May 2017 15:11:19 +0000 (09:11 -0600)]
Merge branch 'nvme-4.12' of git://git.infradead.org/nvme into for-linus
Christoph writes:
"A couple of fixes for the next rc on the nvme front. Various FC fixes
from James, controller removal fixes from Ming (including a block layer
patch), a APST related device quirk from Andy, a RDMA fix for small
queue depth device from Marta, as well as fixes for the lack of
metadata support in non-PCIe drivers and the printk logging format from
me."
Chris Wilson [Fri, 26 May 2017 13:22:09 +0000 (14:22 +0100)]
drm/i915: Keep the forcewake timer alive for 1ms past the most recent use
Currently the timer is armed for 1ms after the first use and is killed
immediately, dropping the forcewake as early as possible. However, for
very frequent operations the forcewake dance has a large impact on
latency and keeping the timer alive until we are idle is preferred. To
achieve this, if we call intel_uncore_forcewake_get whilst the timer is
alive (repeated use), then set a flag to restart the timer on expiry
rather than drop the forcewake usage count. The timer is racy, the
consequence of the race is to expire the timer earlier than is now
desired but does not impact on correct behaviour. The offset the race
slightly, we set the active flag again on intel_uncore_forcewake_put.
The effect should be to reduce the jitter of reacquiring the fw every
1ms on a busy system. However, the cost is to keep the timer alive for
an extra 1ms on a nearly idle system. We chose to incur the jitter
previously to keep the timer off for as much as possible.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170526132209.14640-1-chris@chris-wilson.co.uk
Bart Van Assche [Thu, 25 May 2017 23:38:06 +0000 (16:38 -0700)]
blk-mq: Only register debugfs attributes for blk-mq queues
The code in blk-mq-debugfs.c assumes that it is working on a blk-mq
queue and is not intended to work on a blk-sq queue. Hence only
register blk-mq debugfs attributes for blk-mq queues.
Fixes: commit
9c1051aacde8 ("blk-mq: untangle debugfs and sysfs")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Daniele Ceraolo Spurio [Mon, 22 May 2017 17:50:28 +0000 (10:50 -0700)]
drm/i915/guc: capture GuC logs if FW fails to load
We're currently deleting the GuC logs if the FW fails to load, but those
are still useful to understand why the loading failed. Keeping the
object around allows us to access them after driver load is completed.
v2: keep the object around instead of using kernel memory (chris)
don't store the logs in the gpu_error struct (Chris)
add a check on guc_log_level to avoid snapshotting empty logs
v3: use separate debugfs for error log (Chris)
v4: rebased
v5: clean up obj selection, move err_load inside guc_log, move err_load
cleanup, rename functions (Michal)
v6: move obj back to intel_guc, move functions to intel_uc.c, don't
clear obj on new GuC load, free object only if enable_guc_loading
is set (Michal)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1495475428-19295-1-git-send-email-daniele.ceraolospurio@intel.com
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Tested-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Michal Wajdeczko [Fri, 26 May 2017 11:13:25 +0000 (11:13 +0000)]
drm/i915/guc: Introduce buffer based cmd transport
Buffer based command transport can replace MMIO based mechanism.
It may be used to perform host-2-guc and guc-to-host communication.
Portions of this patch are based on work by:
Michel Thierry <michel.thierry@intel.com>
Robert Beckett <robert.beckett@intel.com>
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
v2: use gem_object_pin_map (Chris)
don't use DEBUG_RATELIMITED (Chris)
don't track action stats (Chris)
simplify next fence (Chris)
use READ_ONCE (Chris)
move blob allocation to new function (Chris)
v3: use static owner id (Daniele)
v4: but keep channel initialization generic (Daniele)
and introduce owner_sub_id (Daniele)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170526111326.87280-3-michal.wajdeczko@intel.com
Michal Wajdeczko [Fri, 26 May 2017 11:13:24 +0000 (11:13 +0000)]
drm/i915/guc: Disable send function on fini
In earlier patch
789a625 we were enabling send function only
after successful init. For completeness, we should make sure
that we disable it on fini.
v2: don't group steps by submission flag (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170526111326.87280-2-michal.wajdeczko@intel.com
Puthikorn Voravootivat [Tue, 23 May 2017 22:38:04 +0000 (15:38 -0700)]
drm: Add definition for eDP backlight frequency
This patch adds the following definition
- Bit mask for EDP_PWMGEN_BIT_COUNT and min/max cap
register which only use bit 0:4
- Base frequency (27 MHz) for backlight PWM frequency
generator.
Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170523223805.46372-5-puthik@chromium.org
Puthikorn Voravootivat [Tue, 23 May 2017 22:38:01 +0000 (15:38 -0700)]
drm/i915: Drop AUX backlight enable check for backlight control
There are some panel that
(1) does not support display backlight enable via AUX
(2) support display backlight adjustment via AUX
(3) support display backlight enable via eDP BL_ENABLE pin
The current driver required that (1) must be support to enable (2).
This patch drops that requirement.
Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170523223805.46372-2-puthik@chromium.org
Jan Kiszka [Wed, 24 May 2017 18:04:41 +0000 (20:04 +0200)]
x86/timers: Move simple_udelay_calibration past init_hypervisor_platform
This ensures that adjustments to x86_platform done by the hypervisor
setup is already respected by this simple calibration.
The current user of this, introduced by
1b5aeebf3a92 ("x86/earlyprintk:
Add support for earlyprintk via USB3 debug port"), comes much later
into play.
Fixes:
dd759d93f4dd ("x86/timers: Add simple udelay calibration")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: http://lkml.kernel.org/r/5e89fe60-aab3-2c1c-aba8-32f8ad376189@siemens.com
Andy Lutomirski [Wed, 24 May 2017 22:06:31 +0000 (15:06 -0700)]
nvme: Quirk APST on Intel 600P/P3100 devices
They have known firmware bugs. A fix is apparently in the works --
once fixed firmware is available, someone from Intel (Hi, Keith!)
can adjust the quirk accordingly.
Cc: stable@vger.kernel.org # v4.11
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Christoph Hellwig [Sat, 20 May 2017 13:14:45 +0000 (15:14 +0200)]
nvme: only setup block integrity if supported by the driver
Currently only the PCIe driver supports metadata, so we should not claim
integrity support for the other drivers. This prevents nasty crashes
with targets that advertise metadata support on fabrics.
Also use the opportunity to factor out some code into a separate helper
that isn't even compiled if CONFIG_BLK_DEV_INTEGRITY is disabled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Christoph Hellwig [Sat, 20 May 2017 13:14:44 +0000 (15:14 +0200)]
nvme: replace is_flags field in nvme_ctrl_ops with a flags field
So that we can have more flags for transport-specific behavior.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Christoph Hellwig [Sat, 20 May 2017 13:14:43 +0000 (15:14 +0200)]
nvme-pci: consistencly use ctrl->device for logging
This is what most of the code already does and gives much more useful
prefixes than the device embedded in the pci_dev.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Dave Airlie [Fri, 26 May 2017 01:51:55 +0000 (11:51 +1000)]
Merge branch 'drm-fixes-4.12' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
A bunch of bug fixes:
- Fix display flickering on some chips at high refresh rates
- suspend/resume fix
- hotplug fix
- a couple of segfault fixes for certain cases
* 'drm-fixes-4.12' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: fix null point error when rmmod amdgpu.
drm/amd/powerplay: fix a signedness bugs
drm/amdgpu: fix NULL pointer panic of emit_gds_switch
drm/radeon: Unbreak HPD handling for r600+
drm/amd/powerplay/smu7: disable mclk switching for high refresh rates
drm/amd/powerplay/smu7: add vblank check for mclk switching (v2)
drm/radeon/ci: disable mclk switching for high refresh rates (v2)
drm/amdgpu/ci: disable mclk switching for high refresh rates (v2)
drm/amdgpu: fix fundamental suspend/resume issue
Dave Airlie [Fri, 26 May 2017 01:51:28 +0000 (11:51 +1000)]
Merge tag 'drm-misc-fixes-2017-05-25' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes
Core Changes:
- Don't drop vblank reference more than once in cases of ww retry (Daniel)
Driver Changes:
- radeon: Fix oops during radeon probe trying to reference wrong device (Lukas)
- qxl: Avoid sleeping while in atomic context on cursor update (Gabriel)
- gma500: Use VBT mode instead of pre-programmed mode for LVDS (Patrik)
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
* tag 'drm-misc-fixes-2017-05-25' of git://anongit.freedesktop.org/git/drm-misc:
drm/gma500/psb: Actually use VBT mode when it is found
drm: Fix deadlock retry loop in page_flip_ioctl
drm: qxl: Delay entering atomic context during cursor update
drm/radeon: Fix oops upon driver load on PowerXpress laptops
Chris Wilson [Thu, 25 May 2017 12:16:12 +0000 (13:16 +0100)]
drm/i915: Consolidate #ifdef CONFIG_INTEL_IOMMU
We depend on intel_iommu_gfx_mapped for various workarounds, but that is
only available under an #ifdef CONFIG_INTEL_IOMMU. Refactor all the
cut-and-paste ifdefs to a common routine.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170525121612.2190-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Chris Wilson [Thu, 25 May 2017 07:25:28 +0000 (08:25 +0100)]
drm/i915: Only GGTT vma may be pinned and prevent shrinking
As only GGTT vma may be permanently pinned and are always at the head of
the object's vma list, as soon as we seen a ppGTT vma we can stop
searching for any_vma_pinned().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170525072528.11185-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Nithin Sujir [Thu, 25 May 2017 02:45:17 +0000 (19:45 -0700)]
bonding: Don't update slave->link until ready to commit
In the loadbalance arp monitoring scheme, when a slave link change is
detected, the slave->link is immediately updated and slave_state_changed
is set. Later down the function, the rtnl_lock is acquired and the
changes are committed, updating the bond link state.
However, the acquisition of the rtnl_lock can fail. The next time the
monitor runs, since slave->link is already updated, it determines that
link is unchanged. This results in the bond link state permanently out
of sync with the slave link.
This patch modifies bond_loadbalance_arp_mon() to handle link changes
identical to bond_ab_arp_{inspect/commit}(). The new link state is
maintained in slave->new_link until we're ready to commit at which point
it's copied into slave->link.
NOTE: miimon_{inspect/commit}() has a more complex state machine
requiring the use of the bond_{propose,commit}_link_state() functions
which maintains the intermediate state in slave->link_new_state. The arp
monitors don't require that.
Testing: This bug is very easy to reproduce with the following steps.
1. In a loop, toggle a slave link of a bond slave interface.
2. In a separate loop, do ifconfig up/down of an unrelated interface to
create contention for rtnl_lock.
Within a few iterations, the bond link goes out of sync with the slave
link.
Signed-off-by: Nithin Nayak Sujir <nsujir@tintri.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Cc: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: Mahesh Bandewar <maheshb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Daney [Wed, 24 May 2017 23:35:49 +0000 (16:35 -0700)]
test_bpf: Add a couple of tests for BPF_JSGE.
Some JITs can optimize comparisons with zero. Add a couple of
BPF_JSGE tests against immediate zero.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 25 May 2017 17:44:29 +0000 (13:44 -0400)]
Merge branch 'bpf-fixes'
Daniel Borkmann says:
====================
Various BPF fixes
Follow-up to fix incorrect pruning when alignment tracking is
in use and to properly clear regs after call to not leave stale
data behind, also a fix that adds bpf_clone_redirect to the
bpf_helper_changes_pkt_data helper and exposes correct map_flags
for lpm map into fdinfo. For details, please see individual
patches.
v1 -> v2:
- Reworked first patch so that env->strict_alignment is the
final indicator on whether we have to deal with strict
alignment rather than having CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
checks on various locations, so only checking env->strict_alignment
is sufficient after that. Thanks for spotting, Dave!
- Added patch 3 and 4.
- Rest as is.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 24 May 2017 23:05:09 +0000 (01:05 +0200)]
bpf: add various verifier test cases
This patch adds various verifier test cases:
1) A test case for the pruning issue when tracking alignment
is used.
2) Various PTR_TO_MAP_VALUE_OR_NULL tests to make sure pointer
arithmetic turns such register into UNKNOWN_VALUE type.
3) Test cases for the special treatment of LD_ABS/LD_IND to
make sure verifier doesn't break calling convention here.
Latter is needed, since f.e. arm64 JIT uses r1 - r5 for
storing temporary data, so they really must be marked as
NOT_INIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 24 May 2017 23:05:08 +0000 (01:05 +0200)]
bpf: fix wrong exposure of map_flags into fdinfo for lpm
trie_alloc() always needs to have BPF_F_NO_PREALLOC passed in via
attr->map_flags, since it does not support preallocation yet. We
check the flag, but we never copy the flag into trie->map.map_flags,
which is later on exposed into fdinfo and used by loaders such as
iproute2. Latter uses this in bpf_map_selfcheck_pinned() to test
whether a pinned map has the same spec as the one from the BPF obj
file and if not, bails out, which is currently the case for lpm
since it exposes always 0 as flags.
Also copy over flags in array_map_alloc() and stack_map_alloc().
They always have to be 0 right now, but we should make sure to not
miss to copy them over at a later point in time when we add actual
flags for them to use.
Fixes:
b95a5c4db09b ("bpf: add a longest prefix match trie map implementation")
Reported-by: Jarno Rajahalme <jarno@covalent.io>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 24 May 2017 23:05:07 +0000 (01:05 +0200)]
bpf: add bpf_clone_redirect to bpf_helper_changes_pkt_data
The bpf_clone_redirect() still needs to be listed in
bpf_helper_changes_pkt_data() since we call into
bpf_try_make_head_writable() from there, thus we need
to invalidate prior pkt regs as well.
Fixes:
36bbef52c7eb ("bpf: direct packet write and access for helpers for clsact progs")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 24 May 2017 23:05:06 +0000 (01:05 +0200)]
bpf: properly reset caller saved regs after helper call and ld_abs/ind
Currently, after performing helper calls, we clear all caller saved
registers, that is r0 - r5 and fill r0 depending on struct bpf_func_proto
specification. The way we reset these regs can affect pruning decisions
in later paths, since we only reset register's imm to 0 and type to
NOT_INIT. However, we leave out clearing of other variables such as id,
min_value, max_value, etc, which can later on lead to pruning mismatches
due to stale data.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Wed, 24 May 2017 23:05:05 +0000 (01:05 +0200)]
bpf: fix incorrect pruning decision when alignment must be tracked
Currently, when we enforce alignment tracking on direct packet access,
the verifier lets the following program pass despite doing a packet
write with unaligned access:
0: (61) r2 = *(u32 *)(r1 +76)
1: (61) r3 = *(u32 *)(r1 +80)
2: (61) r7 = *(u32 *)(r1 +8)
3: (bf) r0 = r2
4: (07) r0 += 14
5: (25) if r7 > 0x1 goto pc+4
R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
R3=pkt_end R7=inv,min_value=0,max_value=1 R10=fp
6: (2d) if r0 > r3 goto pc+1
R0=pkt(id=0,off=14,r=14) R1=ctx R2=pkt(id=0,off=0,r=14)
R3=pkt_end R7=inv,min_value=0,max_value=1 R10=fp
7: (63) *(u32 *)(r0 -4) = r0
8: (b7) r0 = 0
9: (95) exit
from 6 to 8:
R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
R3=pkt_end R7=inv,min_value=0,max_value=1 R10=fp
8: (b7) r0 = 0
9: (95) exit
from 5 to 10:
R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
R3=pkt_end R7=inv,min_value=2 R10=fp
10: (07) r0 += 1
11: (05) goto pc-6
6: safe <----- here, wrongly found safe
processed 15 insns
However, if we enforce a pruning mismatch by adding state into r8
which is then being mismatched in states_equal(), we find that for
the otherwise same program, the verifier detects a misaligned packet
access when actually walking that path:
0: (61) r2 = *(u32 *)(r1 +76)
1: (61) r3 = *(u32 *)(r1 +80)
2: (61) r7 = *(u32 *)(r1 +8)
3: (b7) r8 = 1
4: (bf) r0 = r2
5: (07) r0 += 14
6: (25) if r7 > 0x1 goto pc+4
R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
R3=pkt_end R7=inv,min_value=0,max_value=1
R8=imm1,min_value=1,max_value=1,min_align=1 R10=fp
7: (2d) if r0 > r3 goto pc+1
R0=pkt(id=0,off=14,r=14) R1=ctx R2=pkt(id=0,off=0,r=14)
R3=pkt_end R7=inv,min_value=0,max_value=1
R8=imm1,min_value=1,max_value=1,min_align=1 R10=fp
8: (63) *(u32 *)(r0 -4) = r0
9: (b7) r0 = 0
10: (95) exit
from 7 to 9:
R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
R3=pkt_end R7=inv,min_value=0,max_value=1
R8=imm1,min_value=1,max_value=1,min_align=1 R10=fp
9: (b7) r0 = 0
10: (95) exit
from 6 to 11:
R0=pkt(id=0,off=14,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
R3=pkt_end R7=inv,min_value=2
R8=imm1,min_value=1,max_value=1,min_align=1 R10=fp
11: (07) r0 += 1
12: (b7) r8 = 0
13: (05) goto pc-7 <----- mismatch due to r8
7: (2d) if r0 > r3 goto pc+1
R0=pkt(id=0,off=15,r=15) R1=ctx R2=pkt(id=0,off=0,r=15)
R3=pkt_end R7=inv,min_value=2
R8=imm0,min_value=0,max_value=0,min_align=
2147483648 R10=fp
8: (63) *(u32 *)(r0 -4) = r0
misaligned packet access off 2+15+-4 size 4
The reason why we fail to see it in states_equal() is that the
third test in compare_ptrs_to_packet() ...
if (old->off <= cur->off &&
old->off >= old->range && cur->off >= cur->range)
return true;
... will let the above pass. The situation we run into is that
old->off <= cur->off (14 <= 15), meaning that prior walked paths
went with smaller offset, which was later used in the packet
access after successful packet range check and found to be safe
already.
For example: Given is R0=pkt(id=0,off=0,r=0). Adding offset 14
as in above program to it, results in R0=pkt(id=0,off=14,r=0)
before the packet range test. Now, testing this against R3=pkt_end
with 'if r0 > r3 goto out' will transform R0 into R0=pkt(id=0,off=14,r=14)
for the case when we're within bounds. A write into the packet
at offset *(u32 *)(r0 -4), that is, 2 + 14 -4, is valid and
aligned (2 is for NET_IP_ALIGN). After processing this with
all fall-through paths, we later on check paths from branches.
When the above skb->mark test is true, then we jump near the
end of the program, perform r0 += 1, and jump back to the
'if r0 > r3 goto out' test we've visited earlier already. This
time, R0 is of type R0=pkt(id=0,off=15,r=0), and we'll prune
that part because this time we'll have a larger safe packet
range, and we already found that with off=14 all further insn
were already safe, so it's safe as well with a larger off.
However, the problem is that the subsequent write into the packet
with 2 + 15 -4 is then unaligned, and not caught by the alignment
tracking. Note that min_align, aux_off, and aux_off_align were
all 0 in this example.
Since we cannot tell at this time what kind of packet access was
performed in the prior walk and what minimal requirements it has
(we might do so in the future, but that requires more complexity),
fix it to disable this pruning case for strict alignment for now,
and let the verifier do check such paths instead. With that applied,
the test cases pass and reject the program due to misalignment.
Fixes:
d1174416747d ("bpf: Track alignment of register values in the verifier.")
Reference: http://patchwork.ozlabs.org/patch/761909/
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ihar Hrachyshka [Wed, 24 May 2017 22:19:35 +0000 (15:19 -0700)]
arp: fixed -Wuninitialized compiler warning
Commit
7d472a59c0e5ec117220a05de6b370447fb6cb66 ("arp: always override
existing neigh entries with gratuitous ARP") introduced a compiler
warning:
net/ipv4/arp.c:880:35: warning: 'addr_type' may be used uninitialized in
this function [-Wmaybe-uninitialized]
While the code logic seems to be correct and doesn't allow the variable
to be used uninitialized, and the warning is not consistently
reproducible, it's still worth fixing it for other people not to waste
time looking at the warning in case it pops up in the build environment.
Yes, compiler is probably at fault, but we will need to accommodate.
Fixes:
7d472a59c0e5 ("arp: always override existing neigh entries with gratuitous ARP")
Signed-off-by: Ihar Hrachyshka <ihrachys@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Wang [Wed, 24 May 2017 16:59:31 +0000 (09:59 -0700)]
tcp: avoid fastopen API to be used on AF_UNSPEC
Fastopen API should be used to perform fastopen operations on the TCP
socket. It does not make sense to use fastopen API to perform disconnect
by calling it with AF_UNSPEC. The fastopen data path is also prone to
race conditions and bugs when using with AF_UNSPEC.
One issue reported and analyzed by Vegard Nossum is as follows:
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Thread A: Thread B:
------------------------------------------------------------------------
sendto()
- tcp_sendmsg()
- sk_stream_memory_free() = 0
- goto wait_for_sndbuf
- sk_stream_wait_memory()
- sk_wait_event() // sleep
| sendto(flags=MSG_FASTOPEN, dest_addr=AF_UNSPEC)
| - tcp_sendmsg()
| - tcp_sendmsg_fastopen()
| - __inet_stream_connect()
| - tcp_disconnect() //because of AF_UNSPEC
| - tcp_transmit_skb()// send RST
| - return 0; // no reconnect!
| - sk_stream_wait_connect()
| - sock_error()
| - xchg(&sk->sk_err, 0)
| - return -ECONNRESET
- ... // wake up, see sk->sk_err == 0
- skb_entail() on TCP_CLOSE socket
If the connection is reopened then we will send a brand new SYN packet
after thread A has already queued a buffer. At this point I think the
socket internal state (sequence numbers etc.) becomes messed up.
When the new connection is closed, the FIN-ACK is rejected because the
sequence number is outside the window. The other side tries to
retransmit,
but __tcp_retransmit_skb() calls tcp_trim_head() on an empty skb which
corrupts the skb data length and hits a BUG() in copy_and_csum_bits().
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Hence, this patch adds a check for AF_UNSPEC in the fastopen data path
and return EOPNOTSUPP to user if such case happens.
Fixes:
cf60af03ca4e7 ("tcp: Fast Open client - sendmsg(MSG_FASTOPEN)")
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Kapl [Wed, 24 May 2017 08:22:22 +0000 (10:22 +0200)]
net: move somaxconn init from sysctl code
The default value for somaxconn is set in sysctl_core_net_init(), but this
function is not called when kernel is configured without CONFIG_SYSCTL.
This results in the kernel not being able to accept TCP connections,
because the backlog has zero size. Usually, the user ends up with:
"TCP: request_sock_TCP: Possible SYN flooding on port 7. Dropping request. Check SNMP counters."
If SYN cookies are not enabled the connection is rejected.
Before
ef547f2ac16 (tcp: remove max_qlen_log), the effects were less
severe, because the backlog was always at least eight slots long.
Signed-off-by: Roman Kapl <roman.kapl@sysgo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
KT Liao [Tue, 23 May 2017 20:41:47 +0000 (13:41 -0700)]
Input: elan_i2c - ignore signals when finishing updating firmware
Use wait_for_completion_timeout() instead of
wait_for_completion_interruptible_timeout() to avoid stray signals ruining
firmware update. Our timeout is only 300 msec so we are fine simply letting
it expire in case device misbehaves.
Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
KT Liao [Thu, 25 May 2017 17:06:21 +0000 (10:06 -0700)]
Input: elan_i2c - clear INT before resetting controller
Some old touchpad FWs need to have interrupt cleared before issuing reset
command after updating firmware. We clear interrupt by attempting to read
full report from the controller, and discarding any data read.
Signed-off-by: KT Liao <kt.liao@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Gustavo A. R. Silva [Tue, 23 May 2017 23:18:37 +0000 (18:18 -0500)]
net: fix potential null pointer dereference
Add null check to avoid a potential null pointer dereference.
Addresses-Coverity-ID:
1408831
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rex Zhu [Mon, 22 May 2017 05:11:41 +0000 (13:11 +0800)]
drm/amdgpu: fix null point error when rmmod amdgpu.
this bug happened when amdgpu load failed.
[ 75.740951] BUG: unable to handle kernel paging request at
00000000000031c0
[ 75.748167] IP: [<
ffffffffa064a0e0>] amdgpu_fbdev_restore_mode+0x20/0x60 [amdgpu]
[ 75.755774] PGD 0
[ 75.759185] Oops: 0000 [#1] SMP
[ 75.762408] Modules linked in: amdgpu(OE-) ttm(OE) drm_kms_helper(OE) drm(OE) i2c_algo_bit(E) fb_sys_fops(E) syscopyarea(E) sysfillrect(E) sysimgblt(E) rpcsec_gss_krb5(E) nfsv4(E) nfs(E) fscache(E) eeepc_wmi(E) asus_wmi(E) sparse_keymap(E) intel_rapl(E) snd_hda_codec_hdmi(E) snd_hda_codec_realtek(E) snd_hda_codec_generic(E) snd_hda_intel(E) snd_hda_codec(E) snd_hda_core(E) x86_pkg_temp_thermal(E) intel_powerclamp(E) snd_hwdep(E) snd_pcm(E) snd_seq_midi(E) coretemp(E) kvm_intel(E) snd_seq_midi_event(E) snd_rawmidi(E) kvm(E) snd_seq(E) joydev(E) snd_seq_device(E) snd_timer(E) irqbypass(E) crct10dif_pclmul(E) crc32_pclmul(E) mei_me(E) ghash_clmulni_intel(E) snd(E) aesni_intel(E) mei(E) soundcore(E) aes_x86_64(E) shpchp(E) serio_raw(E) lrw(E) acpi_pad(E) gf128mul(E) glue_helper(E) ablk_helper(E) mac_hid(E)
[ 75.835574] cryptd(E) parport_pc(E) ppdev(E) lp(E) nfsd(E) parport(E) auth_rpcgss(E) nfs_acl(E) lockd(E) grace(E) sunrpc(E) autofs4(E) hid_generic(E) usbhid(E) mxm_wmi(E) psmouse(E) e1000e(E) ptp(E) pps_core(E) ahci(E) libahci(E) wmi(E) video(E) i2c_hid(E) hid(E)
[ 75.858489] CPU: 5 PID: 1603 Comm: rmmod Tainted: G OE 4.9.0-custom #2
[ 75.866183] Hardware name: System manufacturer System Product Name/Z170-A, BIOS 0901 08/31/2015
[ 75.875050] task:
ffff88045d1bbb80 task.stack:
ffffc90002de4000
[ 75.881094] RIP: 0010:[<
ffffffffa064a0e0>] [<
ffffffffa064a0e0>] amdgpu_fbdev_restore_mode+0x20/0x60 [amdgpu]
[ 75.891238] RSP: 0018:
ffffc90002de7d48 EFLAGS:
00010286
[ 75.896648] RAX:
0000000000000000 RBX:
0000000000000000 RCX:
0000000000000001
[ 75.903933] RDX:
0000000000000000 RSI:
ffff88045d1bbb80 RDI:
0000000000000286
[ 75.911183] RBP:
ffffc90002de7d50 R08:
0000000000000502 R09:
0000000000000004
[ 75.918449] R10:
0000000000000000 R11:
0000000000000001 R12:
ffff880464bf0000
[ 75.925675] R13:
ffffffffa0853000 R14:
0000000000000000 R15:
0000564e44f88210
[ 75.932980] FS:
00007f13d5400700(0000) GS:
ffff880476540000(0000) knlGS:
0000000000000000
[ 75.941238] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 75.947088] CR2:
00000000000031c0 CR3:
000000045fd0b000 CR4:
00000000003406e0
[ 75.954332] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 75.961566] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 75.968834] Stack:
[ 75.970881]
ffff880464bf0000 ffffc90002de7d60 ffffffffa0636592 ffffc90002de7d80
[ 75.978454]
ffffffffa059015f ffff880464bf0000 ffff880464bf0000 ffffc90002de7da8
[ 75.986076]
ffffffffa0595216 ffff880464bf0000 ffff880460f4d000 ffffffffa0853000
[ 75.993692] Call Trace:
[ 75.996177] [<
ffffffffa0636592>] amdgpu_driver_lastclose_kms+0x12/0x20 [amdgpu]
[ 76.003700] [<
ffffffffa059015f>] drm_lastclose+0x2f/0xd0 [drm]
[ 76.009777] [<
ffffffffa0595216>] drm_dev_unregister+0x16/0xd0 [drm]
[ 76.016255] [<
ffffffffa0595944>] drm_put_dev+0x34/0x70 [drm]
[ 76.022139] [<
ffffffffa062f365>] amdgpu_pci_remove+0x15/0x20 [amdgpu]
[ 76.028800] [<
ffffffff81416499>] pci_device_remove+0x39/0xc0
[ 76.034661] [<
ffffffff81531caa>] __device_release_driver+0x9a/0x140
[ 76.041121] [<
ffffffff81531e58>] driver_detach+0xb8/0xc0
[ 76.046575] [<
ffffffff81530c95>] bus_remove_driver+0x55/0xd0
[ 76.052401] [<
ffffffff815325fc>] driver_unregister+0x2c/0x50
[ 76.058244] [<
ffffffff81416289>] pci_unregister_driver+0x29/0x90
[ 76.064466] [<
ffffffffa0596c5e>] drm_pci_exit+0x9e/0xb0 [drm]
[ 76.070507] [<
ffffffffa0796d71>] amdgpu_exit+0x1c/0x32 [amdgpu]
[ 76.076609] [<
ffffffff81104810>] SyS_delete_module+0x1a0/0x200
[ 76.082627] [<
ffffffff810e2b1a>] ? rcu_eqs_enter.isra.36+0x4a/0x50
[ 76.089001] [<
ffffffff8100392e>] do_syscall_64+0x6e/0x180
[ 76.094583] [<
ffffffff817e1d2f>] entry_SYSCALL64_slow_path+0x25/0x25
[ 76.101114] Code: 94 c0 c3 31 c0 5d c3 0f 1f 40 00 0f 1f 44 00 00 55 31 c0 48 89 e5 53 48 89 fb 48 c7 c7 1d 21 84 a0 e8 ab 77 b3 e0 e8 fc 8b d7 e0 <48> 8b bb c0 31 00 00 48 85 ff 74 09 e8 ff eb fc ff 85 c0 75 03
[ 76.121432] RIP [<
ffffffffa064a0e0>] amdgpu_fbdev_restore_mode+0x20/0x60 [amdgpu]
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Garver [Tue, 23 May 2017 22:37:27 +0000 (18:37 -0400)]
geneve: fix fill_info when using collect_metadata
Since
9b4437a5b870 ("geneve: Unify LWT and netdev handling.") fill_info
does not return UDP_ZERO_CSUM6_RX when using COLLECT_METADATA. This is
because it uses ip_tunnel_info_af() with the device level info, which is
not valid for COLLECT_METADATA.
Fix by checking for the presence of the actual sockets.
Fixes:
9b4437a5b870 ("geneve: Unify LWT and netdev handling.")
Signed-off-by: Eric Garver <e@erig.me>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jan Kara [Thu, 18 May 2017 23:36:24 +0000 (16:36 -0700)]
xfs: Move handling of missing page into one place in xfs_find_get_desired_pgoff()
Currently several places in xfs_find_get_desired_pgoff() handle the case
of a missing page. Make them all handled in one place after the loop has
terminated.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Jan Kara [Thu, 18 May 2017 23:36:23 +0000 (16:36 -0700)]
xfs: Fix off-by-in in loop termination in xfs_find_get_desired_pgoff()
There is an off-by-one error in loop termination conditions in
xfs_find_get_desired_pgoff() since 'end' may index a page beyond end of
desired range if 'endoff' is page aligned. It doesn't have any visible
effects but still it is good to fix it.
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Jan Kara [Thu, 18 May 2017 23:36:22 +0000 (16:36 -0700)]
xfs: Fix missed holes in SEEK_HOLE implementation
XFS SEEK_HOLE implementation could miss a hole in an unwritten extent as
can be seen by the following command:
xfs_io -c "falloc 0 256k" -c "pwrite 0 56k" -c "pwrite 128k 8k"
-c "seek -h 0" file
wrote 57344/57344 bytes at offset 0
56 KiB, 14 ops; 0.0000 sec (49.312 MiB/sec and 12623.9856 ops/sec)
wrote 8192/8192 bytes at offset 131072
8 KiB, 2 ops; 0.0000 sec (70.383 MiB/sec and 18018.0180 ops/sec)
Whence Result
HOLE 139264
Where we can see that hole at offset 56k was just ignored by SEEK_HOLE
implementation. The bug is in xfs_find_get_desired_pgoff() which does
not properly detect the case when pages are not contiguous.
Fix the problem by properly detecting when found page has larger offset
than expected.
CC: stable@vger.kernel.org
Fixes:
d126d43f631f996daeee5006714fed914be32368
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Eryu Guan [Tue, 23 May 2017 15:30:46 +0000 (08:30 -0700)]
xfs: fix off-by-one on max nr_pages in xfs_find_get_desired_pgoff()
xfs_find_get_desired_pgoff() is used to search for offset of hole or
data in page range [index, end] (both inclusive), and the max number
of pages to search should be at least one, if end == index.
Otherwise the only page is missed and no hole or data is found,
which is not correct.
When block size is smaller than page size, this can be demonstrated
by preallocating a file with size smaller than page size and writing
data to the last block. E.g. run this xfs_io command on a 1k block
size XFS on x86_64 host.
# xfs_io -fc "falloc 0 3k" -c "pwrite 2k 1k" \
-c "seek -d 0" /mnt/xfs/testfile
wrote 1024/1024 bytes at offset 2048
1 KiB, 1 ops; 0.0000 sec (33.675 MiB/sec and 34482.7586 ops/sec)
Whence Result
DATA EOF
Data at offset 2k was missed, and lseek(2) returned ENXIO.
This is uncovered by generic/285 subtest 07 and 08 on ppc64 host,
where pagesize is 64k. Because a recent change to generic/285
reduced the preallocated file size to smaller than 64k.
Cc: stable@vger.kernel.org # v3.7+
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Eric Sandeen [Tue, 23 May 2017 02:54:10 +0000 (19:54 -0700)]
xfs: fix unaligned access in xfs_btree_visit_blocks
This structure copy was throwing unaligned access warnings on sparc64:
Kernel unaligned access at TPC[
1043c088] xfs_btree_visit_blocks+0x88/0xe0 [xfs]
xfs_btree_copy_ptrs does a memcpy, which avoids it.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Nicholas Piggin [Sat, 20 May 2017 04:29:49 +0000 (14:29 +1000)]
powerpc: Add PPC_FEATURE userspace bits for SCV and DARN instructions
Providing "scv" support to userspace requires kernel support, so it
must be advertised as independently to the base ISA 3 instruction set.
The darn instruction relies on firmware enablement, so it has been
decided to split this out from the core ISA 3 feature as well.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Jeremy Kerr [Wed, 24 May 2017 06:49:59 +0000 (16:49 +1000)]
powerpc/spufs: Fix hash faults for kernel regions
Commit
ac29c64089b7 ("powerpc/mm: Replace _PAGE_USER with
_PAGE_PRIVILEGED") swapped _PAGE_USER for _PAGE_PRIVILEGED, and
introduced check_pte_access() which denied kernel access to
non-_PAGE_PRIVILEGED pages.
However, it didn't add _PAGE_PRIVILEGED to the hash fault handler
for spufs' kernel accesses, so the DMAs required to establish SPE
memory no longer work.
This change adds _PAGE_PRIVILEGED to the hash fault handler for
kernel accesses.
Fixes:
ac29c64089b7 ("powerpc/mm: Replace _PAGE_USER with _PAGE_PRIVILEGED")
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Reported-by: Sombat Tragolgosol <sombat3960@gmail.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
projects / GitHub / moto-9609 / android_kernel_motorola_exynos9610.git / log