PM / wakeirq: report a wakeup_event on dedicated wekup irq

[ Upstream commit 09bb6e93956ae5175b96905b723ec879c3ca0765 ]

There are two reasons for reporting wakeup event when dedicated wakeup
IRQ is triggered:

- wakeup events accounting, so proper statistical data will be
  displayed in sysfs and debugfs;

- there are small window when System is entering suspend during which
  dedicated wakeup IRQ can be lost:

dpm_suspend_noirq()
  |- device_wakeup_arm_wake_irqs()
      |- dev_pm_arm_wake_irq(X)
         |- IRQ is enabled and marked as wakeup source
[1]...
  |- suspend_device_irqs()
     |- suspend_device_irq(X)
|- irqd_set(X, IRQD_WAKEUP_ARMED);
   |- wakup IRQ armed

The wakeup IRQ can be lost if it's triggered at point [1]
and not armed yet.

Hence, fix above cases by adding simple pm_wakeup_event() call in
handle_threaded_wake_irq().

Fixes: 4990d4fe327b (PM / Wakeirq: Add automated device wake IRQ handling)
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Tested-by: Keerthy <j-keerthy@ti.com>
[ tony@atomide.com: added missing return to avoid warnings ]
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix tracing sample code warning.

commit a0cb2b5c390151837b08e5f7bca4a6ecddbcd39c upstream.

Commit 6575257c60e1 ("tracing/samples: Fix creation and deletion of
simple_thread_fn creation") introduced a new warning due to using a
boolean as a counter.

Just make it "int".

Fixes: 6575257c60e1 ("tracing/samples: Fix creation and deletion of simple_thread_fn creation")
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/samples: Fix creation and deletion of simple_thread_fn creation

commit 6575257c60e1a26a5319ccf2b5ce5b6449001017 upstream.

Commit 7496946a8 ("tracing: Add samples of DECLARE_EVENT_CLASS() and
DEFINE_EVENT()") added template examples for all the events. It created a
DEFINE_EVENT_FN() example which reused the foo_bar_reg and foo_bar_unreg
functions.

Enabling both the TRACE_EVENT_FN() and DEFINE_EVENT_FN() example trace
events caused the foo_bar_reg to be called twice, creating the test thread
twice. The foo_bar_unreg would remove it only once, even if it was called
multiple times, leaving a thread existing when the module is unloaded,
causing an oops.

Add a ref count and allow foo_bar_reg() and foo_bar_unreg() be called by
multiple trace events.

Fixes: 7496946a8 ("tracing: Add samples of DECLARE_EVENT_CLASS() and DEFINE_EVENT()")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm: fix an integer overflow test

commit 65e93108891e571f177c202add9288eda9ac4100 upstream.

We recently added an integer overflow check but it needs an additional
tweak to work properly on 32 bit systems.

The problem is that we're doing the right hand side of the assignment as
type unsigned long so the max it will have an integer overflow instead
of being larger than SIZE_MAX.  That means the "sz > SIZE_MAX" condition
is never true even on 32 bit systems.  We need to first cast it to u64
and then do the math.

Fixes: 4a630fadbb29 ("drm/msm: Fix potential buffer overflow issue")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/msm: Fix potential buffer overflow issue

commit 4a630fadbb29d9efaedb525f1a8f7449ad107641 upstream.

In function submit_create, if nr_cmds or nr_bos is assigned with
negative value, the allocated buffer may be small than intended.
Using this buffer will lead to buffer overflow issue.

Signed-off-by: Kasin Li <donglil@codeaurora.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Fix build failure on perl script context

commit b581c01fff646b5075d65359c8667de9c667da9e upstream.

On my Archlinux machine, perf faild to build like below:

    CC       scripts/perl/Perf-Trace-Util/Context.o
  In file included from /usr/lib/perl5/core/perl/CORE/perl.h:3905:0,
                   from Context.xs:23:
  /usr/lib/perl5/core/perl/CORE/inline.h: In function :
  /usr/lib/perl5/core/perl/CORE/cop.h:612:13: warning: declaration of 'av'
                                  shadows a previous local [-Werror-shadow]
             AV *av =3D GvAV(PL_defgv);
                 ^
  /usr/lib/perl5/core/perl/CORE/inline.h:526:5: note: in expansion of
                                  macro 'CX_POP_SAVEARRAY'
         CX_POP_SAVEARRAY(cx);
         ^~~~~~~~~~~~~~~~
  In file included from /usr/lib/perl5/core/perl/CORE/perl.h:5853:0,
                   from Context.xs:23:
  /usr/lib/perl5/core/perl/CORE/inline.h:518:9: note:
                                  shadowed declaration is here
         AV *av;
             ^~

What I did to fix is adding '-Wno-shadow' as the error message said it's
the cause of the failure.  Since it's from the perl (not perf) code
base, we don't have the control so I just wanted to ignore the warning
when compiling perl scripting code.

Committer note:

This also fixes the build on Fedora Rawhide.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160802024317.31725-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fstrim: Fix start offset of first cluster group during fstrim

commit 105ddc93f06ebe3e553f58563d11ed63dbcd59f0 upstream.

The first cluster group descriptor is not stored at the start of the
group but at an offset from the start.  We need to take this into
account while doing fstrim on the first cluster group.  Otherwise we
will wrongly start fstrim a few blocks after the desired start block and
the range can cross over into the next cluster group and zero out the
group descriptor there.  This can cause filesytem corruption that cannot
be fixed by fsck.

Link: http://lkml.kernel.org/r/1507835579-7308-1-git-send-email-ashish.samant@oracle.com
Signed-off-by: Ashish Samant <ashish.samant@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8715/1: add a private asm/unaligned.h

commit 1cce91dfc8f7990ca3aea896bfb148f240b12860 upstream.

The asm-generic/unaligned.h header provides two different implementations
for accessing unaligned variables: the access_ok.h version used when
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is set pretends that all pointers
are in fact aligned, while the le_struct.h version convinces gcc that the
alignment of a pointer is '1', to make it issue the correct load/store
instructions depending on the architecture flags.

On ARMv5 and older, we always use the second version, to let the compiler
use byte accesses. On ARMv6 and newer, we currently use the access_ok.h
version, so the compiler can use any instruction including stm/ldm and
ldrd/strd that will cause an alignment trap. This trap can significantly
impact performance when we have to do a lot of fixups and, worse, has
led to crashes in the LZ4 decompressor code that does not have a trap
handler.

This adds an ARM specific version of asm/unaligned.h that uses the
le_struct.h/be_struct.h implementation unconditionally. This should lead
to essentially the same code on ARMv6+ as before, with the exception of
using regular load/store instructions instead of the trapping instructions
multi-register variants.

The crash in the LZ4 decompressor code was probably introduced by the
patch replacing the LZ4 implementation, commit 4e1a33b105dd ("lib: update
LZ4 compressor module"), so linux-4.11 and higher would be affected most.
However, we probably want to have this backported to all older stable
kernels as well, to help with the performance issues.

There are two follow-ups that I think we should also work on, but not
backport to stable kernels, first to change the asm-generic version of
the header to remove the ARM special case, and second to review all
other uses of CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS to see if they
might be affected by the same problem on ARM.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: mvebu: pl310-cache disable double-linefill

commit cda80a82ac3e89309706c027ada6ab232be1d640 upstream.

Under heavy system stress mvebu SoC using Cortex A9 sporadically
encountered instability issues.

The "double linefill" feature of L2 cache was identified as causing
dependency between read and write which lead to the deadlock.

Especially, it was the cause of deadlock seen under heavy PCIe traffic,
as this dependency violates PCIE overtaking rule.

Fixes: c8f5a878e554 ("ARM: mvebu: use DT properties to fine-tune the L2 configuration")
Signed-off-by: Yan Markman <ymarkman@marvell.com>
Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
[gregory.clement@free-electrons.com: reformulate commit log, add Armada
375 and add Fixes tag]
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: ensure __dump_instr() checks addr_limit

commit 7a7003b1da010d2b0d1dc8bf21c10f5c73b389f1 upstream.

It's possible for a user to deliberately trigger __dump_instr with a
chosen kernel address.

Let's avoid problems resulting from this by using get_user() rather than
__get_user(), ensuring that we don't erroneously access kernel memory.

Where we use __dump_instr() on kernel text, we already switch to
KERNEL_DS, so this shouldn't adversely affect those cases.

Fixes: 60ffc30d5652810d ("arm64: Exception handling")
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: adau17x1: Workaround for noise bug in ADC

commit 1e6f4fc06f6411adf98bbbe7fcd79442cd2b2a75 upstream.

The ADC in the ADAU1361 (and possibly other Analog Devices codecs)
exhibits a cyclic variation in the noise floor (in our test setup between
-87 and -93 dB), a new value being attained within this range whenever a
new capture stream is started. The cycle repeats after about 10 or 11
restarts.

The workaround recommended by the manufacturer is to toggle the ADOSR bit
in the Converter Control 0 register each time a new capture stream is
started.

I have verified that the patch fixes this problem on the ADAU1361, and
according to the manufacturer toggling the bit in question in this manner
will at least have no detrimental effect on other chips served by this
driver.

Signed-off-by: Ricard Wanderlof <ricardw@axis.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: fix out-of-bounds read during ASN.1 parsing

commit 2eb9eabf1e868fda15808954fb29b0f105ed65f1 upstream.

syzkaller with KASAN reported an out-of-bounds read in
asn1_ber_decoder().  It can be reproduced by the following command,
assuming CONFIG_X509_CERTIFICATE_PARSER=y and CONFIG_KASAN=y:

    keyctl add asymmetric desc $'\x30\x30' @s

The bug is that the length of an ASN.1 data value isn't validated in the
case where it is encoded using the short form, causing the decoder to
read past the end of the input buffer.  Fix it by validating the length.

The bug report was:

    BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x10cb/0x1730 lib/asn1_decoder.c:233
    Read of size 1 at addr ffff88003cccfa02 by task syz-executor0/6818

    CPU: 1 PID: 6818 Comm: syz-executor0 Not tainted 4.14.0-rc7-00008-g5f479447d983 #2
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    Call Trace:
     __dump_stack lib/dump_stack.c:16 [inline]
     dump_stack+0xb3/0x10b lib/dump_stack.c:52
     print_address_description+0x79/0x2a0 mm/kasan/report.c:252
     kasan_report_error mm/kasan/report.c:351 [inline]
     kasan_report+0x236/0x340 mm/kasan/report.c:409
     __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:427
     asn1_ber_decoder+0x10cb/0x1730 lib/asn1_decoder.c:233
     x509_cert_parse+0x1db/0x650 crypto/asymmetric_keys/x509_cert_parser.c:89
     x509_key_preparse+0x64/0x7a0 crypto/asymmetric_keys/x509_public_key.c:174
     asymmetric_key_preparse+0xcb/0x1a0 crypto/asymmetric_keys/asymmetric_type.c:388
     key_create_or_update+0x347/0xb20 security/keys/key.c:855
     SYSC_add_key security/keys/keyctl.c:122 [inline]
     SyS_add_key+0x1cd/0x340 security/keys/keyctl.c:62
     entry_SYSCALL_64_fastpath+0x1f/0xbe
    RIP: 0033:0x447c89
    RSP: 002b:00007fca7a5d3bd8 EFLAGS: 00000246 ORIG_RAX: 00000000000000f8
    RAX: ffffffffffffffda RBX: 00007fca7a5d46cc RCX: 0000000000447c89
    RDX: 0000000020006f4a RSI: 0000000020006000 RDI: 0000000020001ff5
    RBP: 0000000000000046 R08: fffffffffffffffd R09: 0000000000000000
    R10: 0000000000000002 R11: 0000000000000246 R12: 0000000000000000
    R13: 0000000000000000 R14: 00007fca7a5d49c0 R15: 00007fca7a5d4700

Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: return full count in keyring_read() if buffer is too small

commit 3239b6f29bdfb4b0a2ba59df995fc9e6f4df7f1f upstream.

Commit e645016abc80 ("KEYS: fix writing past end of user-supplied buffer
in keyring_read()") made keyring_read() stop corrupting userspace memory
when the user-supplied buffer is too small.  However it also made the
return value in that case be the short buffer size rather than the size
required, yet keyctl_read() is actually documented to return the size
required.  Therefore, switch it over to the documented behavior.

Note that for now we continue to have it fill the short buffer, since it
did that before (pre-v3.13) and dump_key_tree_aux() in keyutils arguably
relies on it.

Fixes: e645016abc80 ("KEYS: fix writing past end of user-supplied buffer in keyring_read()")
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: check MaxPathNameComponentLength != 0 before using it

commit f74bc7c6679200a4a83156bb89cbf6c229fe8ec0 upstream.

And fix tcon leak in error path.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: David Disseldorp <ddiss@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: Fix nested rwsem annotation for lockdep splat

commit 1f20f9ff57ca23b9f5502fca85ce3977e8496cb1 upstream.

syzkaller reported the lockdep splat due to the possible deadlock of
grp->list_mutex of each sequencer client object.  Actually this is
rather a false-positive report due to the missing nested lock
annotations.  The sequencer client may deliver the event directly to
another client which takes another own lock.

For addressing this issue, this patch replaces the simple down_read()
with down_read_nested().  As a lock subclass, the already existing
"hop" can be re-used, which indicates the depth of the call.

Reference: http://lkml.kernel.org/r/089e082686ac9b482e055c832617@google.com
Reported-by: syzbot <bot+7feb8de6b4d6bf810cf098bef942cc387e79d0ad@syzkaller.appspotmail.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: timer: Add missing mutex lock for compat ioctls

commit 79fb0518fec8c8b4ea7f1729f54f293724b3dbb0 upstream.

The races among ioctl and other operations were protected by the
commit af368027a49a ("ALSA: timer: Fix race among timer ioctls") and
later fixes, but one code path was forgotten in the scenario: the
32bit compat ioctl.  As syzkaller recently spotted, a very similar
use-after-free may happen with the combination of compat ioctls.

The fix is simply to apply the same ioctl_lock to the compat_ioctl
callback, too.

Fixes: af368027a49a ("ALSA: timer: Fix race among timer ioctls")
Reference: http://lkml.kernel.org/r/089e082686ac9b482e055c832617@google.com
Reported-by: syzbot <bot+e5f3c9783e7048a74233054febbe9f1bdf54b6da@syzkaller.appspotmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.96

Revert "drm: bridge: add DT bindings for TI ths8135"

This reverts commit 11bf4a8e1d5a300b38ca4bbe1156716b0174f2da which is
commit 2e644be30fcc08c736f66b60f4898d274d4873ab upstream.

Ben pointed out that there is no driver or device trees referencing this
device in 4.4-stable, so the patch should not be present there.

Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ecryptfs: fix dereference of NULL user_key_payload

commit f66665c09ab489a11ca490d6a82df57cfc1bea3e upstream.

In eCryptfs, we failed to verify that the authentication token keys are
not revoked before dereferencing their payloads, which is problematic
because the payload of a revoked key is NULL.  request_key() *does* skip
revoked keys, but there is still a window where the key can be revoked
before we acquire the key semaphore.

Fix it by updating ecryptfs_get_key_payload_data() to return
-EKEYREVOKED if the key payload is NULL.  For completeness we check this
for "encrypted" keys as well as "user" keys, although encrypted keys
cannot be revoked currently.

Alternatively we could use key_validate(), but since we'll also need to
fix ecryptfs_get_key_payload_data() to validate the payload length, it
seems appropriate to just check the payload pointer.

Fixes: 237fead61998 ("[PATCH] ecryptfs: fs/Makefile and fs/Kconfig")
Reviewed-by: James Morris <james.l.morris@oracle.com>
Cc: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/microcode/intel: Disable late loading on model 79

commit 723f2828a98c8ca19842042f418fb30dd8cfc0f7 upstream.

Blacklist Broadwell X model 79 for late loading due to an erratum.

Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171018111225.25635-1-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: fan53555: fix I2C device ids

commit fc1111b885437f374ed54aadda44d8b241ebd2a3 upstream.

The device tree nodes all correctly describe the regulators as
syr827 or syr828, but the I2C device id is currently set to the
wildcard value of syr82x in the driver.  This causes udev to fail
to match the driver module with the modalias data from sysfs.

Fix this by replacing the I2C device ids with ones that match the
device tree descriptions, with syr827 and syr828.  Tested on
Firefly rk3288 board.  The syr82x id was not used anywhere.

Fixes: e80c47bd738b (regulator: fan53555: Export I2C module alias information)
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb: Ignore CMD_FLUSH_QUEUE_REPLY messages

commit e1d2d1329a5722dbecc9c278303fcc4aa01f8790 upstream.

To avoid kernel warning "Unhandled message (68)", ignore the
CMD_FLUSH_QUEUE_REPLY message for now.

As of Leaf v2 firmware version v4.1.844 (2017-02-15), flush tx queue is
synchronous. There is a capability bit indicating whether flushing tx
queue is synchronous or asynchronous.

A proper solution would be to query the device for capabilities. If the
synchronous tx flush capability bit is set, we should wait for
CMD_FLUSH_QUEUE_REPLY message, while flushing the tx queue.

Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: kvaser_usb: Correct return value in printout

commit 8f65a923e6b628e187d5e791cf49393dd5e8c2f9 upstream.

If the return value from kvaser_usb_send_simple_msg() was non-zero, the
return value from kvaser_usb_flush_queue() was printed in the kernel
warning.

Signed-off-by: Jimmy Assarsson <jimmyassarsson@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: sun4i: fix loopback mode

commit 3a379f5b36ae039dfeb6f73316e47ab1af4945df upstream.

Fix loopback mode by setting the right flag and remove presume mode.

Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: sg: Re-fix off by one in sg_fill_request_table()

commit 587c3c9f286cee5c9cac38d28c8ae1875f4ec85b upstream.

Commit 109bade9c625 ("scsi: sg: use standard lists for sg_requests")
introduced an off-by-one error in sg_ioctl(), which was fixed by commit
bd46fc406b30 ("scsi: sg: off by one in sg_ioctl()").

Unfortunately commit 4759df905a47 ("scsi: sg: factor out
sg_fill_request_table()") moved that code, and reintroduced the
bug (perhaps due to a botched rebase).  Fix it again.

Fixes: 4759df905a47 ("scsi: sg: factor out sg_fill_request_table()")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: zfcp: fix erp_action use-before-initialize in REC action trace

commit ab31fd0ce65ec93828b617123792c1bb7c6dcc42 upstream.

v4.10 commit 6f2ce1c6af37 ("scsi: zfcp: fix rport unblock race with LUN
recovery") extended accessing parent pointer fields of struct
zfcp_erp_action for tracing.  If an erp_action has never been enqueued
before, these parent pointer fields are uninitialized and NULL. Examples
are zfcp objects freshly added to the parent object's children list,
before enqueueing their first recovery subsequently. In
zfcp_erp_try_rport_unblock(), we iterate such list. Accessing erp_action
fields can cause a NULL pointer dereference.  Since the kernel can read
from lowcore on s390, it does not immediately cause a kernel page
fault. Instead it can cause hangs on trying to acquire the wrong
erp_action->adapter->dbf->rec_lock in zfcp_dbf_rec_action_lvl()
                      ^bogus^
while holding already other locks with IRQs disabled.

Real life example from attaching lots of LUNs in parallel on many CPUs:

crash> bt 17723
PID: 17723  TASK: ...               CPU: 25  COMMAND: "zfcperp0.0.1800"
 LOWCORE INFO:
  -psw      : 0x0404300180000000 0x000000000038e424
  -function : _raw_spin_lock_wait_flags at 38e424
...
 #0 [fdde8fc90] zfcp_dbf_rec_action_lvl at 3e0004e9862 [zfcp]
 #1 [fdde8fce8] zfcp_erp_try_rport_unblock at 3e0004dfddc [zfcp]
 #2 [fdde8fd38] zfcp_erp_strategy at 3e0004e0234 [zfcp]
 #3 [fdde8fda8] zfcp_erp_thread at 3e0004e0a12 [zfcp]
 #4 [fdde8fe60] kthread at 173550
 #5 [fdde8feb8] kernel_thread_starter at 10add2

zfcp_adapter
 zfcp_port
  zfcp_unit <address>, 0x404040d600000000
  scsi_device NULL, returning early!
zfcp_scsi_dev.status = 0x40000000
0x40000000 ZFCP_STATUS_COMMON_RUNNING

crash> zfcp_unit <address>
struct zfcp_unit {
  erp_action = {
    adapter = 0x0,
    port = 0x0,
    unit = 0x0,
  },
}

zfcp_erp_action is always fully embedded into its container object. Such
container object is never moved in its object tree (only add or delete).
Hence, erp_action parent pointers can never change.

To fix the issue, initialize the erp_action parent pointers before
adding the erp_action container to any list and thus before it becomes
accessible from outside of its initializing function.

In order to also close the time window between zfcp_erp_setup_act()
memsetting the entire erp_action to zero and setting the parent pointers
again, drop the memset and instead explicitly initialize individually
all erp_action fields except for parent pointers. To be extra careful
not to introduce any other unintended side effect, even keep zeroing the
erp_action fields for list and timer. Also double-check with
WARN_ON_ONCE that erp_action parent pointers never change, so we get to
know when we would deviate from previous behavior.

Signed-off-by: Steffen Maier <maier@linux.vnet.ibm.com>
Fixes: 6f2ce1c6af37 ("scsi: zfcp: fix rport unblock race with LUN recovery")
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

assoc_array: Fix a buggy node-splitting case

commit ea6789980fdaa610d7eb63602c746bf6ec70cd2b upstream.

This fixes CVE-2017-12193.

Fix a case in the assoc_array implementation in which a new leaf is
added that needs to go into a node that happens to be full, where the
existing leaves in that node cluster together at that level to the
exclusion of new leaf.

What needs to happen is that the existing leaves get moved out to a new
node, N1, at level + 1 and the existing node needs replacing with one,
N0, that has pointers to the new leaf and to N1.

The code that tries to do this gets this wrong in two ways:

 (1) The pointer that should've pointed from N0 to N1 is set to point
     recursively to N0 instead.

 (2) The backpointer from N0 needs to be set correctly in the case N0 is
     either the root node or reached through a shortcut.

Fix this by removing this path and using the split_node path instead,
which achieves the same end, but in a more general way (thanks to Eric
Biggers for spotting the redundancy).

The problem manifests itself as:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
  IP: assoc_array_apply_edit+0x59/0xe5

Fixes: 3cb989501c26 ("Add a generic associative array implementation.")
Reported-and-tested-by: WU Fan <u3536072@connect.hku.hk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: gtco - fix potential out-of-bound access

commit a50829479f58416a013a4ccca791336af3c584c7 upstream.

parse_hid_report_descriptor() has a while (i < length) loop, which
only guarantees that there's at least 1 byte in the buffer, but the
loop body can read multiple bytes which causes out-of-bounds access.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: elan_i2c - add ELAN0611 to the ACPI table

commit 57a95b41869b8f0d1949c24df2a9dac1ca7082ee upstream.

ELAN0611 touchpad uses elan_i2c as its driver. It can be found
on Lenovo ideapad 320-15IKB.

So add it to ACPI table to enable the touchpad.

[Ido Adiv <idoad123@gmail.com> reports that the same ACPI ID is used for
Elan touchpad in ideapad 520].

BugLink: https://bugs.launchpad.net/bugs/1723736
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/gntdev: avoid out of bounds access in case of partial gntdev_mmap()

commit 298d275d4d9bea3524ff4bc76678c140611d8a8d upstream.

In case gntdev_mmap() succeeds only partially in mapping grant pages
it will leave some vital information uninitialized needed later for
cleanup. This will lead to an out of bounds array access when unmapping
the already mapped pages.

So just initialize the data needed for unmapping the pages a little bit
earlier.

Reported-by: Arthur Borsboom <arthurborsboom@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix READDIRPLUS skipping an entry

commit c6cdd51404b7ac12dd95173ddfc548c59ecf037f upstream.

Marios Titas running a Haskell program noticed a problem with fuse's
readdirplus: when it is interrupted by a signal, it skips one directory
entry.

The reason is that fuse erronously updates ctx->pos after a failed
dir_emit().

The issue originates from the patch adding readdirplus support.

Reported-by: Jakob Unterwurzacher <jakobunt@gmail.com>
Tested-by: Marios Titas <redneb@gmx.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: 0b05b18381ee ("fuse: implement NFS-like readdirplus support")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: uapi: spidev: add missing ioctl header

commit a2b4a79b88b24c49d98d45a06a014ffd22ada1a4 upstream.

The SPI_IOC_MESSAGE() macro references _IOC_SIZEBITS. Add linux/ioctl.h
to make sure this macro is defined. This fixes the following build
failure of lcdproc with the musl libc:

In file included from .../sysroot/usr/include/sys/ioctl.h:7:0,
                 from hd44780-spi.c:31:
hd44780-spi.c: In function 'spi_transfer':
hd44780-spi.c:89:24: error: '_IOC_SIZEBITS' undeclared (first use in this function)
  status = ioctl(p->fd, SPI_IOC_MESSAGE(1), &xfer);
                        ^

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: Handle error condition in xhci_stop_device()

commit b3207c65dfafae27e7c492cb9188c0dc0eeaf3fd upstream.

xhci_stop_device() calls xhci_queue_stop_endpoint() multiple times
without checking the return value. xhci_queue_stop_endpoint() can
return error if the HC is already halted or unable to queue commands.
This can cause a deadlock condition as xhci_stop_device() would
end up waiting indefinitely for a completion for the command that
didn't get queued. Fix this by checking the return value and bailing
out of xhci_stop_device() in case of error. This patch happens to fix
potential memory leaks of the allocated command structures as well.

Fixes: c311e391a7ef ("xhci: rework command timeout and cancellation,")
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: unlock dangling spinlock in try_flush_caps()

commit 6c2838fbdedb9b72a81c931d49e56b229b6cdbca upstream.

sparse warns:

  fs/ceph/caps.c:2042:9: warning: context imbalance in 'try_flush_caps' - wrong count at exit

We need to exit this function with the lock unlocked, but a couple of
cases leave it locked.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - fix headset mic problem for Dell machines with alc236

commit f265788c336979090ac80b9ae173aa817c4fe40d upstream.

We have several Dell laptops which use the codec alc236, the headset
mic can't work on these machines. Following the commit 736f20a70, we
add the pin cfg table to make the headset mic work.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Add support for ALC236/ALC3204

commit 736f20a7060857ff569e9e9586ae6c1204a73e07 upstream.

Add support for ALC236/ALC3204.
Add headset mode support for ALC236/ALC3204.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

workqueue: replace pool->manager_arb mutex with a flag

commit 692b48258dda7c302e777d7d5f4217244478f1f6 upstream.

Josef reported a HARDIRQ-safe -> HARDIRQ-unsafe lock order detected by
lockdep:

 [ 1270.472259] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
 [ 1270.472783] 4.14.0-rc1-xfstests-12888-g76833e8 #110 Not tainted
 [ 1270.473240] -----------------------------------------------------
 [ 1270.473710] kworker/u5:2/5157 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
 [ 1270.474239]  (&(&lock->wait_lock)->rlock){+.+.}, at: [<ffffffff8da253d2>] __mutex_unlock_slowpath+0xa2/0x280
 [ 1270.474994]
 [ 1270.474994] and this task is already holding:
 [ 1270.475440]  (&pool->lock/1){-.-.}, at: [<ffffffff8d2992f6>] worker_thread+0x366/0x3c0
 [ 1270.476046] which would create a new lock dependency:
 [ 1270.476436]  (&pool->lock/1){-.-.} -> (&(&lock->wait_lock)->rlock){+.+.}
 [ 1270.476949]
 [ 1270.476949] but this new dependency connects a HARDIRQ-irq-safe lock:
 [ 1270.477553]  (&pool->lock/1){-.-.}
 ...
 [ 1270.488900] to a HARDIRQ-irq-unsafe lock:
 [ 1270.489327]  (&(&lock->wait_lock)->rlock){+.+.}
 ...
 [ 1270.494735]  Possible interrupt unsafe locking scenario:
 [ 1270.494735]
 [ 1270.495250]        CPU0                    CPU1
 [ 1270.495600]        ----                    ----
 [ 1270.495947]   lock(&(&lock->wait_lock)->rlock);
 [ 1270.496295]                                local_irq_disable();
 [ 1270.496753]                                lock(&pool->lock/1);
 [ 1270.497205]                                lock(&(&lock->wait_lock)->rlock);
 [ 1270.497744]   <Interrupt>
 [ 1270.497948]     lock(&pool->lock/1);

, which will cause a irq inversion deadlock if the above lock scenario
happens.

The root cause of this safe -> unsafe lock order is the
mutex_unlock(pool->manager_arb) in manage_workers() with pool->lock
held.

Unlocking mutex while holding an irq spinlock was never safe and this
problem has been around forever but it never got noticed because the
only time the mutex is usually trylocked while holding irqlock making
actual failures very unlikely and lockdep annotation missed the
condition until the recent b9c16a0e1f73 ("locking/mutex: Fix
lockdep_assert_held() fail").

Using mutex for pool->manager_arb has always been a bit of stretch.
It primarily is an mechanism to arbitrate managership between workers
which can easily be done with a pool flag.  The only reason it became
a mutex is that pool destruction path wants to exclude parallel
managing operations.

This patch replaces the mutex with a new pool flag POOL_MANAGER_ACTIVE
and make the destruction path wait for the current manager on a wait
queue.

v2: Drop unnecessary flag clearing before pool destruction as
    suggested by Boqun.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.95

FS-Cache: fix dereference of NULL user_key_payload

commit d124b2c53c7bee6569d2a2d0b18b4a1afde00134 upstream.

When the file /proc/fs/fscache/objects (available with
CONFIG_FSCACHE_OBJECT_LIST=y) is opened, we request a user key with
description "fscache:objlist", then access its payload.  However, a
revoked key has a NULL payload, and we failed to check for this.
request_key() *does* skip revoked keys, but there is still a window
where the key can be revoked before we access its payload.

Fix it by checking for a NULL payload, treating it like a key which was
already revoked at the time it was requested.

Fixes: 4fbf4291aa15 ("FS-Cache: Allow the current state of all objects to be dumped")
Reviewed-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fscrypto: require write access to mount to set encryption policy

commit ba63f23d69a3a10e7e527a02702023da68ef8a6d upstream.

[Please apply to 4.4-stable.  Note: this was already backported, but
only to ext4; it was missed that it should go to f2fs as well.  This is
needed to make xfstest generic/395 pass on f2fs.]

Since setting an encryption policy requires writing metadata to the
filesystem, it should be guarded by mnt_want_write/mnt_drop_write.
Otherwise, a user could cause a write to a frozen or readonly
filesystem.  This was handled correctly by f2fs but not by ext4.  Make
fscrypt_process_policy() handle it rather than relying on the filesystem
to get it right.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: Fix race between updating and finding a negative key

commit 363b02dab09b3226f3bd1420dad9c72b79a42a76 upstream.

Consolidate KEY_FLAG_INSTANTIATED, KEY_FLAG_NEGATIVE and the rejection
error into one field such that:

 (1) The instantiation state can be modified/read atomically.

 (2) The error can be accessed atomically with the state.

 (3) The error isn't stored unioned with the payload pointers.

This deals with the problem that the state is spread over three different
objects (two bits and a separate variable) and reading or updating them
atomically isn't practical, given that not only can uninstantiated keys
change into instantiated or rejected keys, but rejected keys can also turn
into instantiated keys - and someone accessing the key might not be using
any locking.

The main side effect of this problem is that what was held in the payload
may change, depending on the state.  For instance, you might observe the
key to be in the rejected state.  You then read the cached error, but if
the key semaphore wasn't locked, the key might've become instantiated
between the two reads - and you might now have something in hand that isn't
actually an error code.

The state is now KEY_IS_UNINSTANTIATED, KEY_IS_POSITIVE or a negative error
code if the key is negatively instantiated.  The key_is_instantiated()
function is replaced with key_is_positive() to avoid confusion as negative
keys are also 'instantiated'.

Additionally, barriering is included:

 (1) Order payload-set before state-set during instantiation.

 (2) Order state-read before payload-read when using the key.

Further separate barriering is necessary if RCU is being used to access the
payload content after reading the payload pointers.

Fixes: 146aa8b1453b ("KEYS: Merge the type-specific data with the payload data")
Reported-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fscrypt: fix dereference of NULL user_key_payload

commit d60b5b7854c3d135b869f74fb93eaf63cbb1991a upstream.

When an fscrypt-encrypted file is opened, we request the file's master
key from the keyrings service as a logon key, then access its payload.
However, a revoked key has a NULL payload, and we failed to check for
this.  request_key() *does* skip revoked keys, but there is still a
window where the key can be revoked before we acquire its semaphore.

Fix it by checking for a NULL payload, treating it like a key which was
already revoked at the time it was requested.

Fixes: 88bd6ccdcdd6 ("ext4 crypto: add encryption key management facilities")
Reviewed-by: James Morris <james.l.morris@oracle.com>
Cc: <stable@vger.kernel.org> [v4.1+]
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs crypto: add missing locking for keyring_key access

commit 745e8490b1e960ad79859dd8ba6a0b5a8d3d994e upstream.

This patch adopts:
ext4 crypto: add missing locking for keyring_key access

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs crypto: replace some BUG_ON()'s with error checks

commit 66aa3e1274fcf887e9d6501a68163270fc7718e7 upstream.

This patch adopts:
ext4 crypto: replace some BUG_ON()'s with error checks

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/autogroup: Fix autogroup_move_group() to never skip sched_move_task()

commit 18f649ef344127ef6de23a5a4272dbe2fdb73dde upstream.

The PF_EXITING check in task_wants_autogroup() is no longer needed. Remove
it, but see the next patch.

However the comment is correct in that autogroup_move_group() must always
change task_group() for every thread so the sysctl_ check is very wrong;
we can race with cgroups and even sys_setsid() is not safe because a task
running with task_group() == ag->tg must participate in refcounting:

int main(void)
{
int sctl = open("/proc/sys/kernel/sched_autogroup_enabled", O_WRONLY);

assert(sctl > 0);
if (fork()) {
wait(NULL); // destroy the child's ag/tg
pause();
}

assert(pwrite(sctl, "1\n", 2, 0) == 2);
assert(setsid() > 0);
if (fork())
pause();

kill(getppid(), SIGKILL);
sleep(1);

// The child has gone, the grandchild runs with kref == 1
assert(pwrite(sctl, "0\n", 2, 0) == 2);
assert(setsid() > 0);

// runs with the freed ag/tg
for (;;)
sleep(1);

return 0;
}

crashes the kernel. It doesn't really need sleep(1), it doesn't matter if
autogroup_move_group() actually frees the task_group or this happens later.

Reported-by: Vern Lovejoy <vlovejoy@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: hartsjc@redhat.com
Cc: vbendel@redhat.com
Link: http://lkml.kernel.org/r/20161114184609.GA15965@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
 [sumits: submit to 4.4 LTS, post testing on Hikey]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Fix double-word compare and exchange in LWS code on 32-bit kernels

commit 374b3bf8e8b519f61eb9775888074c6e46b3bf0c upstream.

As discussed on the debian-hppa list, double-wordcompare and exchange
operations fail on 32-bit kernels.  Looking at the code, I realized that
the ",ma" completer does the wrong thing in the  "ldw,ma  4(%r26), %r29"
instruction.  This increments %r26 and causes the following store to
write to the wrong location.

Note by Helge Deller:
The patch applies cleanly to stable kernel series if this upstream
commit is merged in advance:
f4125cfdb300 ("parisc: Avoid trashing sr2 and sr3 in LWS code").

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Tested-by: Christoph Biedl <debian.axhn@manchmal.in-ulm.de>
Fixes: 89206491201c ("parisc: Implement new LWS CAS supporting 64 bit operations.")
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Avoid trashing sr2 and sr3 in LWS code

commit f4125cfdb3008363137f744c101e5d76ead760ba upstream.

There is no need to trash sr2 and sr3 in the Light-weight syscall (LWS).  sr2
already points to kernel space (it's zero in userspace, otherwise syscalls
wouldn't work), and since the LWS code is executed in userspace, we can simply
ignore to preload sr3.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pkcs7: Prevent NULL pointer dereference, since sinfo is not always set.

commit 68a1fdbbf8bd3378325e45c19e167a165f9ffc3a upstream.

The ASN.1 parser does not necessarily set the sinfo field,
this patch prevents a NULL pointer dereference on broken
input.

Fixes: 99db44350672 ("PKCS#7: Appropriately restrict authenticated attributes and content type")
Signed-off-by: Eric Sesterhenn <eric.sesterhenn@x41-dsec.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: don't let add_key() update an uninstantiated key

commit 60ff5b2f547af3828aebafd54daded44cfb0807a upstream.

Currently, when passed a key that already exists, add_key() will call the
key's ->update() method if such exists.  But this is heavily broken in the
case where the key is uninstantiated because it doesn't call
__key_instantiate_and_link().  Consequently, it doesn't do most of the
things that are supposed to happen when the key is instantiated, such as
setting the instantiation state, clearing KEY_FLAG_USER_CONSTRUCT and
awakening tasks waiting on it, and incrementing key->user->nikeys.

It also never takes key_construction_mutex, which means that
->instantiate() can run concurrently with ->update() on the same key.  In
the case of the "user" and "logon" key types this causes a memory leak, at
best.  Maybe even worse, the ->update() methods of the "encrypted" and
"trusted" key types actually just dereference a NULL pointer when passed an
uninstantiated key.

Change key_create_or_update() to wait interruptibly for the key to finish
construction before continuing.

This patch only affects *uninstantiated* keys.  For now we still allow a
negatively instantiated key to be updated (thereby positively
instantiating it), although that's broken too (the next patch fixes it)
and I'm not sure that anyone actually uses that functionality either.

Here is a simple reproducer for the bug using the "encrypted" key type
(requires CONFIG_ENCRYPTED_KEYS=y), though as noted above the bug
pertained to more than just the "encrypted" key type:

    #include <stdlib.h>
    #include <unistd.h>
    #include <keyutils.h>

    int main(void)
    {
        int ringid = keyctl_join_session_keyring(NULL);

        if (fork()) {
            for (;;) {
                const char payload[] = "update user:foo 32";

                usleep(rand() % 10000);
                add_key("encrypted", "desc", payload, sizeof(payload), ringid);
                keyctl_clear(ringid);
            }
        } else {
            for (;;)
                request_key("encrypted", "desc", "callout_info", ringid);
        }
    }

It causes:

    BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
    IP: encrypted_update+0xb0/0x170
    PGD 7a178067 P4D 7a178067 PUD 77269067 PMD 0
    PREEMPT SMP
    CPU: 0 PID: 340 Comm: reproduce Tainted: G      D         4.14.0-rc1-00025-g428490e38b2e #796
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    task: ffff8a467a39a340 task.stack: ffffb15c40770000
    RIP: 0010:encrypted_update+0xb0/0x170
    RSP: 0018:ffffb15c40773de8 EFLAGS: 00010246
    RAX: 0000000000000000 RBX: ffff8a467a275b00 RCX: 0000000000000000
    RDX: 0000000000000005 RSI: ffff8a467a275b14 RDI: ffffffffb742f303
    RBP: ffffb15c40773e20 R08: 0000000000000000 R09: ffff8a467a275b17
    R10: 0000000000000020 R11: 0000000000000000 R12: 0000000000000000
    R13: 0000000000000000 R14: ffff8a4677057180 R15: ffff8a467a275b0f
    FS:  00007f5d7fb08700(0000) GS:ffff8a467f200000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000000018 CR3: 0000000077262005 CR4: 00000000001606f0
    Call Trace:
     key_create_or_update+0x2bc/0x460
     SyS_add_key+0x10c/0x1d0
     entry_SYSCALL_64_fastpath+0x1f/0xbe
    RIP: 0033:0x7f5d7f211259
    RSP: 002b:00007ffed03904c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000f8
    RAX: ffffffffffffffda RBX: 000000003b2a7955 RCX: 00007f5d7f211259
    RDX: 00000000004009e4 RSI: 00000000004009ff RDI: 0000000000400a04
    RBP: 0000000068db8bad R08: 000000003b2a7955 R09: 0000000000000004
    R10: 000000000000001a R11: 0000000000000246 R12: 0000000000400868
    R13: 00007ffed03905d0 R14: 0000000000000000 R15: 0000000000000000
    Code: 77 28 e8 64 34 1f 00 45 31 c0 31 c9 48 8d 55 c8 48 89 df 48 8d 75 d0 e8 ff f9 ff ff 85 c0 41 89 c4 0f 88 84 00 00 00 4c 8b 7d c8 <49> 8b 75 18 4c 89 ff e8 24 f8 ff ff 85 c0 41 89 c4 78 6d 49 8b
    RIP: encrypted_update+0xb0/0x170 RSP: ffffb15c40773de8
    CR2: 0000000000000018

Reported-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib/digsig: fix dereference of NULL user_key_payload

commit 192cabd6a296cbc57b3d8c05c4c89d87fc102506 upstream.

digsig_verify() requests a user key, then accesses its payload.
However, a revoked key has a NULL payload, and we failed to check for
this.  request_key() *does* skip revoked keys, but there is still a
window where the key can be revoked before we acquire its semaphore.

Fix it by checking for a NULL payload, treating it like a key which was
already revoked at the time it was requested.

Fixes: 051dbb918c7f ("crypto: digital signature verification support")
Reviewed-by: James Morris <james.l.morris@oracle.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KEYS: encrypted: fix dereference of NULL user_key_payload

commit 13923d0865ca96312197962522e88bc0aedccd74 upstream.

A key of type "encrypted" references a "master key" which is used to
encrypt and decrypt the encrypted key's payload.  However, when we
accessed the master key's payload, we failed to handle the case where
the master key has been revoked, which sets the payload pointer to NULL.
Note that request_key() *does* skip revoked keys, but there is still a
window where the key can be revoked before we acquire its semaphore.

Fix it by checking for a NULL payload, treating it like a key which was
already revoked at the time it was requested.

This was an issue for master keys of type "user" only.  Master keys can
also be of type "trusted", but those cannot be revoked.

Fixes: 7e70cb497850 ("keys: add new key-type encrypted")
Reviewed-by: James Morris <james.l.morris@oracle.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: David Safford <safford@us.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtlwifi: rtl8821ae: Fix connection lost problem

commit b8b8b16352cd90c6083033fd4487f04fae935c18 upstream.

In commit 40b368af4b75 ("rtlwifi: Fix alignment issues"), the read
of REG_DBI_READ was changed from 16 to 8 bits. For unknown reasonsi
this change results in reduced stability for the wireless connection.
This regression was located using bisection.

Fixes: 40b368af4b75 ("rtlwifi: Fix alignment issues")
Reported-and-tested-by: James Cameron <quozl@laptop.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clockevents/drivers/cs5535: Improve resilience to spurious interrupts

commit eb39a7c0355393c5a8d930f342ad7a6231b552c4 upstream.

The interrupt handler mfgpt_tick() is not robust versus spurious interrupts
which happen before the clock event device is registered and fully
initialized.

The reason is that the safe guard against spurious interrupts solely checks
for the clockevents shutdown state, but lacks a check for detached
state. If the interrupt hits while the device is in detached state it
passes the safe guard and dereferences the event handler call back which is
NULL.

Add the missing state check.

Fixes: 8f9327cbb6e8 ("clockevents/drivers/cs5535: Migrate to new 'set-state' interface")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/20171020093103.3317F6004D@linux.fjfi.cvut.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mbus: fix window size calculation for 4GB windows

commit 2bbbd96357ce76cc45ec722c00f654aa7b189112 upstream.

At least the Armada XP SoC supports 4GB on a single DRAM window. Because
the size register values contain the actual size - 1, the MSB is set in
that case. For example, the SDRAM window's control register's value is
0xffffffe1 for 4GB (bits 31 to 24 contain the size).

The MBUS driver reads back each window's size from registers and
calculates the actual size as (control_reg | ~DDR_SIZE_MASK) + 1, which
overflows for 32 bit values, resulting in other miscalculations further
on (a bad RAM window for the CESA crypto engine calculated by
mvebu_mbus_setup_cpu_target_nooverlap() in my case).

This patch changes the type in 'struct mbus_dram_window' from u32 to
u64, which allows us to keep using the same register calculation code in
most MBUS-using drivers (which calculate ->size - 1 again).

Fixes: fddddb52a6c4 ("bus: introduce an Marvell EBU MBus driver")
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmsmac: make some local variables 'static const' to reduce stack size

commit c503dd38f850be28867ef7a42d9abe5ade81a9bd upstream.

With KASAN and a couple of other patches applied, this driver is one
of the few remaining ones that actually use more than 2048 bytes of
kernel stack:

broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function 'wlc_phy_workarounds_nphy_gainctrl':
broadcom/brcm80211/brcmsmac/phy/phy_n.c:16065:1: warning: the frame size of 3264 bytes is larger than 2048 bytes [-Wframe-larger-than=]
broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function 'wlc_phy_workarounds_nphy':
broadcom/brcm80211/brcmsmac/phy/phy_n.c:17138:1: warning: the frame size of 2864 bytes is larger than 2048 bytes [-Wframe-larger-than=]

Here, I'm reducing the stack size by marking as many local variables as
'static const' as I can without changing the actual code.

This is the first of three patches to improve the stack usage in this
driver. It would be good to have this backported to stabl kernels
to get all drivers in 'allmodconfig' below the 2048 byte limit so
we can turn on the frame warning again globally, but I realize that
the patch is larger than the normal limit for stable backports.

The other two patches do not need to be backported.

Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: ismt: Separate I2C block read from SMBus block read

commit c6ebcedbab7ca78984959386012a17b21183e1a3 upstream.

Commit b6c159a9cb69 ("i2c: ismt: Don't duplicate the receive length for
block reads") broke I2C block reads. It aimed to fix normal SMBus block
read, but changed the correct behavior of I2C block read in the process.

According to Documentation/i2c/smbus-protocol, one vital difference
between normal SMBus block read and I2C block read is that there is no
byte count prefixed in the data sent on the wire:

 SMBus Block Read:  i2c_smbus_read_block_data()
 S Addr Wr [A] Comm [A]
            S Addr Rd [A] [Count] A [Data] A [Data] A ... A [Data] NA P

 I2C Block Read:  i2c_smbus_read_i2c_block_data()
 S Addr Wr [A] Comm [A]
            S Addr Rd [A] [Data] A [Data] A ... A [Data] NA P

Therefore the two transaction types need to be processed differently in
the driver by copying of the dma_buffer as done previously for the
I2C_SMBUS_I2C_BLOCK_DATA case.

Fixes: b6c159a9cb69 ("i2c: ismt: Don't duplicate the receive length for block reads")
Signed-off-by: Pontus Andersson <epontan@gmail.com>
Tested-by: Stephen Douthit <stephend@adiengineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Remove superfluous '-' added by printk conversion

commit 6bf88a343db2b3c160edf9b82a74966b31cc80bd upstream.

While converting the error messages to the standard macros in the
commit 4e76a8833fac ("ALSA: hda - Replace with standard printk"), a
superfluous '-' slipped in the code mistakenly.  Its influence is
almost negligible, merely shows a dB value as negative integer instead
of positive integer (or vice versa) in the rare error message.
So let's kill this embarrassing byte to show more correct value.

Fixes: 4e76a8833fac ("ALSA: hda - Replace with standard printk")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: Enable 'use' locking in all configurations

commit 8009d506a1dd00cf436b0c4cca0dcec130580a21 upstream.

The 'use' locking macros are no-ops if neither SMP or SND_DEBUG is
enabled.  This might once have been OK in non-preemptible
configurations, but even in that case snd_seq_read() may sleep while
relying on a 'use' lock.  So always use the proper implementations.

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/mmu: flush tlbs before deleting page tables

commit 77913bbcb43ac9a07a6fe849c2fd3bf85fc8bdd8 upstream.

Even though we've zeroed the PDE, the GPU may have cached the PD, so we
need to flush when deleting them.

Noticed while working on replacement MMU code, but a backport might be a
good idea, so let's fix it in the current code too.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/bsp/g92: disable by default

commit 194d68dd051c2dd5ac2b522ae16100e774e8d869 upstream.

G92's seem to require some additional bit of initialization before the
BSP engine can work. It feels like clocks are not set up for the
underlying VLD engine, which means that all commands submitted to the
xtensa chip end up hanging. VP seems to work fine though.

This still allows people to force-enable the bsp engine if they want to
play around with it, but makes it harder for the card to hang by
default.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: esd_usb2: Fix can_dlc value for received RTR, frames

commit 72d92e865d1560723e1957ee3f393688c49ca5bf upstream.

The dlc member of the struct rx_msg contains also the ESD_RTR flag to
mark received RTR frames. Without the fix the can_dlc value for received
RTR frames would always be set to 8 by get_can_dlc() instead of the
received value.

Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: musb: Check for host-mode using is_host_active() on reset interrupt

commit 445ef61543da3db5b699f87fb0aa4f227165f6ed upstream.

The sunxi musb has a bug where sometimes it will generate a babble
error on device disconnect instead of a disconnect IRQ. When this
happens the musb controller switches from host mode to device mode
(it clears MUSB_DEVCTL_HM/MUSB_DEVCTL_SESSION and sets
MUSB_DEVCTL_BDEVICE) and gets stuck in this state.

The babble error is misdetected as a bus reset because MUSB_DEVCTL_HM
was cleared.

To fix this, use is_host_active() rather than (devctl & MUSB_DEVCTL_HM)
to detect babble error so that sunxi musb babble recovery can handle it
by restoring the mode. This information is provided by the driver logic
and does not rely on register contents.

Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: musb: sunxi: Explicitly release USB PHY on exit

commit 6ed05c68cbcae42cd52b8e53b66952bfa9c002ce upstream.

This fixes a kernel oops when unloading the driver due to usb_put_phy
being called after usb_phy_generic_unregister when the device is
detached. Calling usb_phy_generic_unregister causes x->dev->driver to
be NULL in usb_put_phy and results in a NULL pointer dereference.

Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: gs_usb: fix busy loop if no more TX context is available

commit 97819f943063b622eca44d3644067c190dc75039 upstream.

If sending messages with no cable connected, it quickly happens that
there is no more TX context available. Then "gs_can_start_xmit()"
returns with "NETDEV_TX_BUSY" and the upper layer does retry
immediately keeping the CPU busy. To fix that issue, I moved
"atomic_dec(&dev->active_tx_urbs)" from "gs_usb_xmit_callback()" to
the TX done handling in "gs_usb_receive_bulk_callback()". Renaming
"active_tx_urbs" to "active_tx_contexts" and moving it into
"gs_[alloc|free]_tx_context()" would also make sense.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Add native DSD support for Pro-Ject Pre Box S2 Digital

commit 9bb201a5d5acc733943e8af7151cceab9d976a69 upstream.

Add native DSD support quirk for Pro-Ject Pre Box S2 Digital USB id
2772:0230.

Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: hub: Allow reset retry for USB2 devices on connect bounce

commit 1ac7db63333db1eeff901bfd6bbcd502b4634fa4 upstream.

If the connect status change is set during reset signaling, but
the status remains connected just retry port reset.

This solves an issue with connecting a 90W HP Thunderbolt 3 dock
with a Lenovo Carbon x1 (5th generation) which causes a 30min loop
of a high speed device being re-discovererd before usb ports starts
working.

[...]
[ 389.023845] usb 3-1: new high-speed USB device number 55 using xhci_hcd
[ 389.491841] usb 3-1: new high-speed USB device number 56 using xhci_hcd
[ 389.959928] usb 3-1: new high-speed USB device number 57 using xhci_hcd
[...]

This is caused by a high speed device that doesn't successfully go to the
enabled state after the second port reset. Instead the connection bounces
(connected, with connect status change), bailing out completely from
enumeration just to restart from scratch.

Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1716332
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: quirks: add quirk for WORLDE MINI MIDI keyboard

commit 2811501e6d8f5747d08f8e25b9ecf472d0dc4c7d upstream.

This keyboard doesn't implement Get String descriptors properly even
though string indexes are valid. What happens is that when requesting
for the String descriptor, the device disconnects and
reconnects. Without this quirk, this loop will continue forever.

Cc: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Владимир Мартьянов <vilgeforce@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdc_acm: Add quirk for Elatec TWN3

commit 765fb2f181cad669f2beb87842a05d8071f2be85 upstream.

Elatec TWN3 has the union descriptor on data interface. This results in
failure to bind the device to the driver with the following log:
  usb 1-1.2: new full speed USB device using streamplug-ehci and address 4
  usb 1-1.2: New USB device found, idVendor=09d8, idProduct=0320
  usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  usb 1-1.2: Product: RFID Device (COM)
  usb 1-1.2: Manufacturer: OEM
  cdc_acm 1-1.2:1.0: Zero length descriptor references
  cdc_acm: probe of 1-1.2:1.0 failed with error -22

Adding the NO_UNION_NORMAL quirk for the device fixes the issue.

`lsusb -v` of the device:

Bus 001 Device 003: ID 09d8:0320
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            2 Communications
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        32
  idVendor           0x09d8
  idProduct          0x0320
  bcdDevice            3.00
  iManufacturer           1 OEM
  iProduct                2 RFID Device (COM)
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           67
    bNumInterfaces          2
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              250mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      1 AT-commands (v.25ter)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0020  1x 32 bytes
        bInterval               2
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        1
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass        10 CDC Data
      bInterfaceSubClass      0 Unused
      bInterfaceProtocol      0
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0020  1x 32 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0020  1x 32 bytes
        bInterval               0
      CDC Header:
        bcdCDC               1.10
      CDC Call Management:
        bmCapabilities       0x03
          call management
          use DataInterface
        bDataInterface          1
      CDC ACM:
        bmCapabilities       0x06
          sends break
          line coding and serial state
      CDC Union:
        bMasterInterface        0
        bSlaveInterface         1
Device Status:     0x0000
  (Bus Powered)

Signed-off-by: Maksim Salau <msalau@iotecha.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: metro-usb: add MS7820 device id

commit 31dc3f819bac28a0990b36510197560258ab7421 upstream.

Add device-id entry for (Honeywell) Metrologic MS7820 bar code scanner.

The device has two interfaces (in this mode?); a vendor-specific
interface with two interrupt endpoints and a second HID interface, which
we do not bind to.

Reported-by: Ladislav Dobrovsky <ladislav.dobrovsky@gmail.com>
Tested-by: Ladislav Dobrovsky <ladislav.dobrovsky@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: core: fix out-of-bounds access bug in usb_get_bos_descriptor()

commit 1c0edc3633b56000e18d82fc241e3995ca18a69e upstream.

Andrey used the syzkaller fuzzer to find an out-of-bounds memory
access in usb_get_bos_descriptor().  The code wasn't checking that the
next usb_dev_cap_header structure could fit into the remaining buffer
space.

This patch fixes the error and also reduces the bNumDeviceCaps field
in the header to match the actual number of capabilities found, in
cases where there are fewer than expected.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: devio: Revert "USB: devio: Don't corrupt user memory"

commit 845d584f41eac3475c21e4a7d5e88d0f6e410cf7 upstream.

Taking the uurb->buffer_length userspace passes in as a maximum for the
actual urbs transfer_buffer_length causes 2 serious issues:

1) It breaks isochronous support for all userspace apps using libusb,
   as existing libusb versions pass in 0 for uurb->buffer_length,
   relying on the kernel using the lenghts of the usbdevfs_iso_packet_desc
   descriptors passed in added together as buffer length.

   This for example causes redirection of USB audio and Webcam's into
   virtual machines using qemu-kvm to no longer work. This is a userspace
   ABI break and as such must be reverted.

   Note that the original commit does not protect other users / the
   kernels memory, it only stops the userspace process making the call
   from shooting itself in the foot.

2) It may cause the kernel to program host controllers to DMA over random
   memory. Just as the devio code used to only look at the iso_packet_desc
   lenghts, the host drivers do the same, relying on the submitter of the
   urbs to make sure the entire buffer is large enough and not checking
   transfer_buffer_length.

   But the "USB: devio: Don't corrupt user memory" commit now takes the
   userspace provided uurb->buffer_length for the buffer-size while copying
   over the user-provided iso_packet_desc lengths 1:1, allowing the user
   to specify a small buffer size while programming the host controller to
   dma a lot more data.

   (Atleast the ohci, uhci, xhci and fhci drivers do not check
    transfer_buffer_length for isoc transfers.)

This reverts commit fa1ed74eb1c2 ("USB: devio: Don't corrupt user memory")
fixing both these issues.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.4.94

Revert "tty: goldfish: Fix a parameter of a call to free_irq"

This reverts commit 01b3db29ba1edd79b9c3e7cd294739b70257d278 which is
commit 1a5c2d1de7d35f5eb9793266237903348989502b upstream.

Ben writes:
This fixes a bug introduced in 4.6 by commit 465893e18878 "tty:
goldfish: support platform_device with id -1".  For earlier
kernel versions, it *introduces* a bug.

So let's drop it.

Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

cpufreq: CPPC: add ACPI_PROCESSOR dependency

[ Upstream commit a578884fa0d2768f13d37c6591a9e1ed600482d3 ]

Without the Kconfig dependency, we can get this warning:

warning: ACPI_CPPC_CPUFREQ selects ACPI_CPPC_LIB which has unmet direct dependencies (ACPI && ACPI_PROCESSOR)

Fixes: 5477fb3bd1e8 (ACPI / CPPC: Add a CPUFreq driver for use with CPPC)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd/callback: Cleanup callback cred on shutdown

[ Upstream commit f7d1ddbe7648af7460d23688c8c131342eb43b3a ]

The rpccred gotten from rpc_lookup_machine_cred() should be put when
state is shutdown.

Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

target/iscsi: Fix unsolicited data seq_end_offset calculation

[ Upstream commit 4d65491c269729a1e3b375c45e73213f49103d33 ]

In case of unsolicited data for the first sequence
seq_end_offset must be set to minimum of total data length
and FirstBurstLength, so do not add cmd->write_data_done
to the min of total data length and FirstBurstLength.

This patch avoids that with ImmediateData=Yes, InitialR2T=No,
MaxXmitDataSegmentLength < FirstBurstLength that a WRITE command
with IO size above FirstBurstLength triggers sequence error
messages, for example

Set following parameters on target (linux-4.8.12)
ImmediateData = Yes
InitialR2T = No
MaxXmitDataSegmentLength = 8k
FirstBurstLength = 64k

Log in from Open iSCSI initiator and execute
dd if=/dev/zero of=/dev/sdb bs=128k count=1 oflag=direct

Error messages on target
Command ITT: 0x00000035 with Offset: 65536, Length: 8192 outside
of Sequence 73728:131072 while DataSequenceInOrder=Yes.
Command ITT: 0x00000035, received DataSN: 0x00000001 higher than
expected 0x00000000.
Unable to perform within-command recovery while ERL=0.

Signed-off-by: Varun Prakash <varun@chelsio.com>
[ bvanassche: Use min() instead of open-coding it / edited patch description ]
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uapi: fix linux/mroute6.h userspace compilation errors

[ Upstream commit 72aa107df6a275cf03359934ca5799a2be7a1bf7 ]

Include <linux/in6.h> to fix the following linux/mroute6.h userspace
compilation errors:

/usr/include/linux/mroute6.h:80:22: error: field 'mf6cc_origin' has incomplete type
  struct sockaddr_in6 mf6cc_origin;  /* Origin of mcast */
/usr/include/linux/mroute6.h:81:22: error: field 'mf6cc_mcastgrp' has incomplete type
  struct sockaddr_in6 mf6cc_mcastgrp;  /* Group in question */
/usr/include/linux/mroute6.h:91:22: error: field 'src' has incomplete type
  struct sockaddr_in6 src;
/usr/include/linux/mroute6.h:92:22: error: field 'grp' has incomplete type
  struct sockaddr_in6 grp;
/usr/include/linux/mroute6.h:132:18: error: field 'im6_src' has incomplete type
  struct in6_addr im6_src, im6_dst;
/usr/include/linux/mroute6.h:132:27: error: field 'im6_dst' has incomplete type
  struct in6_addr im6_src, im6_dst;

Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uapi: fix linux/rds.h userspace compilation errors

[ Upstream commit feb0869d90e51ce8b6fd8a46588465b1b5a26d09 ]

Consistently use types from linux/types.h to fix the following
linux/rds.h userspace compilation errors:

/usr/include/linux/rds.h:106:2: error: unknown type name 'uint8_t'
  uint8_t name[32];
/usr/include/linux/rds.h:107:2: error: unknown type name 'uint64_t'
  uint64_t value;
/usr/include/linux/rds.h:117:2: error: unknown type name 'uint64_t'
  uint64_t next_tx_seq;
/usr/include/linux/rds.h:118:2: error: unknown type name 'uint64_t'
  uint64_t next_rx_seq;
/usr/include/linux/rds.h:121:2: error: unknown type name 'uint8_t'
  uint8_t transport[TRANSNAMSIZ];  /* null term ascii */
/usr/include/linux/rds.h:122:2: error: unknown type name 'uint8_t'
  uint8_t flags;
/usr/include/linux/rds.h:129:2: error: unknown type name 'uint64_t'
  uint64_t seq;
/usr/include/linux/rds.h:130:2: error: unknown type name 'uint32_t'
  uint32_t len;
/usr/include/linux/rds.h:135:2: error: unknown type name 'uint8_t'
  uint8_t flags;
/usr/include/linux/rds.h:139:2: error: unknown type name 'uint32_t'
  uint32_t sndbuf;
/usr/include/linux/rds.h:144:2: error: unknown type name 'uint32_t'
  uint32_t rcvbuf;
/usr/include/linux/rds.h:145:2: error: unknown type name 'uint64_t'
  uint64_t inum;
/usr/include/linux/rds.h:153:2: error: unknown type name 'uint64_t'
  uint64_t       hdr_rem;
/usr/include/linux/rds.h:154:2: error: unknown type name 'uint64_t'
  uint64_t       data_rem;
/usr/include/linux/rds.h:155:2: error: unknown type name 'uint32_t'
  uint32_t       last_sent_nxt;
/usr/include/linux/rds.h:156:2: error: unknown type name 'uint32_t'
  uint32_t       last_expected_una;
/usr/include/linux/rds.h:157:2: error: unknown type name 'uint32_t'
  uint32_t       last_seen_una;
/usr/include/linux/rds.h:164:2: error: unknown type name 'uint8_t'
  uint8_t  src_gid[RDS_IB_GID_LEN];
/usr/include/linux/rds.h:165:2: error: unknown type name 'uint8_t'
  uint8_t  dst_gid[RDS_IB_GID_LEN];
/usr/include/linux/rds.h:167:2: error: unknown type name 'uint32_t'
  uint32_t max_send_wr;
/usr/include/linux/rds.h:168:2: error: unknown type name 'uint32_t'
  uint32_t max_recv_wr;
/usr/include/linux/rds.h:169:2: error: unknown type name 'uint32_t'
  uint32_t max_send_sge;
/usr/include/linux/rds.h:170:2: error: unknown type name 'uint32_t'
  uint32_t rdma_mr_max;
/usr/include/linux/rds.h:171:2: error: unknown type name 'uint32_t'
  uint32_t rdma_mr_size;
/usr/include/linux/rds.h:212:9: error: unknown type name 'uint64_t'
 typedef uint64_t rds_rdma_cookie_t;
/usr/include/linux/rds.h:215:2: error: unknown type name 'uint64_t'
  uint64_t addr;
/usr/include/linux/rds.h:216:2: error: unknown type name 'uint64_t'
  uint64_t bytes;
/usr/include/linux/rds.h:221:2: error: unknown type name 'uint64_t'
  uint64_t cookie_addr;
/usr/include/linux/rds.h:222:2: error: unknown type name 'uint64_t'
  uint64_t flags;
/usr/include/linux/rds.h:228:2: error: unknown type name 'uint64_t'
  uint64_t  cookie_addr;
/usr/include/linux/rds.h:229:2: error: unknown type name 'uint64_t'
  uint64_t  flags;
/usr/include/linux/rds.h:234:2: error: unknown type name 'uint64_t'
  uint64_t flags;
/usr/include/linux/rds.h:240:2: error: unknown type name 'uint64_t'
  uint64_t local_vec_addr;
/usr/include/linux/rds.h:241:2: error: unknown type name 'uint64_t'
  uint64_t nr_local;
/usr/include/linux/rds.h:242:2: error: unknown type name 'uint64_t'
  uint64_t flags;
/usr/include/linux/rds.h:243:2: error: unknown type name 'uint64_t'
  uint64_t user_token;
/usr/include/linux/rds.h:248:2: error: unknown type name 'uint64_t'
  uint64_t  local_addr;
/usr/include/linux/rds.h:249:2: error: unknown type name 'uint64_t'
  uint64_t  remote_addr;
/usr/include/linux/rds.h:252:4: error: unknown type name 'uint64_t'
    uint64_t compare;
/usr/include/linux/rds.h:253:4: error: unknown type name 'uint64_t'
    uint64_t swap;
/usr/include/linux/rds.h:256:4: error: unknown type name 'uint64_t'
    uint64_t add;
/usr/include/linux/rds.h:259:4: error: unknown type name 'uint64_t'
    uint64_t compare;
/usr/include/linux/rds.h:260:4: error: unknown type name 'uint64_t'
    uint64_t swap;
/usr/include/linux/rds.h:261:4: error: unknown type name 'uint64_t'
    uint64_t compare_mask;
/usr/include/linux/rds.h:262:4: error: unknown type name 'uint64_t'
    uint64_t swap_mask;
/usr/include/linux/rds.h:265:4: error: unknown type name 'uint64_t'
    uint64_t add;
/usr/include/linux/rds.h:266:4: error: unknown type name 'uint64_t'
    uint64_t nocarry_mask;
/usr/include/linux/rds.h:269:2: error: unknown type name 'uint64_t'
  uint64_t flags;
/usr/include/linux/rds.h:270:2: error: unknown type name 'uint64_t'
  uint64_t user_token;
/usr/include/linux/rds.h:274:2: error: unknown type name 'uint64_t'
  uint64_t user_token;
/usr/include/linux/rds.h:275:2: error: unknown type name 'int32_t'
  int32_t  status;

Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: clean up unsafe d_parent accesses in build_dentry_path

[ Upstream commit c6b0b656ca24ede6657abb4a2cd910fa9c1879ba ]

While we hold a reference to the dentry when build_dentry_path is
called, we could end up racing with a rename that changes d_parent.
Handle that situation correctly, by using the rcu_read_lock to
ensure that the parent dentry and inode stick around long enough
to safely check ceph_snap and ceph_ino.

Link: http://tracker.ceph.com/issues/18148
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Yan, Zheng <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: at91: ensure state is restored after suspending

[ Upstream commit e3ccc921b7d8fd1fcd10a00720e09823d8078666 ]

When going to suspend, the I2C registers may be lost because the power to
VDDcore is cut. Restore them when resuming.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: mvpp2: release reference to txq_cpu[] entry after unmapping

[ Upstream commit 36fb7435b6ac4d288a2d4deea8934f9456ab46b6 ]

The mvpp2_txq_bufs_free() function is called upon TX completion to DMA
unmap TX buffers, and free the corresponding SKBs. It gets the
references to the SKB to free and the DMA buffer to unmap from a per-CPU
txq_pcpu data structure.

However, the code currently increments the pointer to the next entry
before doing the DMA unmap and freeing the SKB. It does not cause any
visible problem because for a given SKB the TX completion is guaranteed
to take place on the CPU where the TX was started. However, it is much
more logical to increment the pointer to the next entry once the current
entry has been completely unmapped/released.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: scsi_dh_emc: return success in clariion_std_inquiry()

[ Upstream commit 4d7d39a18b8b81511f0b893b7d2203790bf8a58b ]

We accidentally return an uninitialized variable on success.

Fixes: b6ff1b14cdf4 ("[SCSI] scsi_dh: Update EMC handler")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

slub: do not merge cache if slub_debug contains a never-merge flag

[ Upstream commit c6e28895a4372992961888ffaadc9efc643b5bfe ]

In case CONFIG_SLUB_DEBUG_ON=n, find_mergeable() gets debug features from
commandline but never checks if there are features from the
SLAB_NEVER_MERGE set.

As a result selected by slub_debug caches are always mergeable if they
have been created without a custom constructor set or without one of the
SLAB_* debug features on.

This moves the SLAB_NEVER_MERGE check below the flags update from
commandline to make sure it won't merge the slab cache if one of the debug
features is on.

Link: http://lkml.kernel.org/r/20170101124451.GA4740@lp-laptop-d
Signed-off-by: Grygorii Maistrenko <grygoriimkd@gmail.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2/dlmglue: prepare tracking logic to avoid recursive cluster lock

[ Upstream commit 439a36b8ef38657f765b80b775e2885338d72451 ]

We are in the situation that we have to avoid recursive cluster locking,
but there is no way to check if a cluster lock has been taken by a precess
already.

Mostly, we can avoid recursive locking by writing code carefully.
However, we found that it's very hard to handle the routines that are
invoked directly by vfs code.  For instance:

  const struct inode_operations ocfs2_file_iops = {
      .permission     = ocfs2_permission,
      .get_acl        = ocfs2_iop_get_acl,
      .set_acl        = ocfs2_iop_set_acl,
  };

Both ocfs2_permission() and ocfs2_iop_get_acl() call ocfs2_inode_lock(PR):

  do_sys_open
   may_open
    inode_permission
     ocfs2_permission
      ocfs2_inode_lock() <=== first time
       generic_permission
        get_acl
         ocfs2_iop_get_acl
   ocfs2_inode_lock() <=== recursive one

A deadlock will occur if a remote EX request comes in between two of
ocfs2_inode_lock().  Briefly describe how the deadlock is formed:

On one hand, OCFS2_LOCK_BLOCKED flag of this lockres is set in
BAST(ocfs2_generic_handle_bast) when downconvert is started on behalf of
the remote EX lock request.  Another hand, the recursive cluster lock
(the second one) will be blocked in in __ocfs2_cluster_lock() because of
OCFS2_LOCK_BLOCKED.  But, the downconvert never complete, why? because
there is no chance for the first cluster lock on this node to be
unlocked - we block ourselves in the code path.

The idea to fix this issue is mostly taken from gfs2 code.

1. introduce a new field: struct ocfs2_lock_res.l_holders, to keep track
   of the processes' pid who has taken the cluster lock of this lock
   resource;

2. introduce a new flag for ocfs2_inode_lock_full:
   OCFS2_META_LOCK_GETBH; it means just getting back disk inode bh for
   us if we've got cluster lock.

3. export a helper: ocfs2_is_locked_by_me() is used to check if we have
   got the cluster lock in the upper code path.

The tracking logic should be used by some of the ocfs2 vfs's callbacks,
to solve the recursive locking issue cuased by the fact that vfs
routines can call into each other.

The performance penalty of processing the holder list should only be
seen at a few cases where the tracking logic is used, such as get/set
acl.

You may ask what if the first time we got a PR lock, and the second time
we want a EX lock? fortunately, this case never happens in the real
world, as far as I can see, including permission check,
(get|set)_(acl|attr), and the gfs2 code also do so.

[sfr@canb.auug.org.au remove some inlines]
Link: http://lkml.kernel.org/r/20170117100948.11657-2-zren@suse.com
Signed-off-by: Eric Ren <zren@suse.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: xts - Add ECB dependency

[ Upstream commit 12cb3a1c4184f891d965d1f39f8cfcc9ef617647 ]

Since the
   commit f1c131b45410a202eb45cc55980a7a9e4e4b4f40
   crypto: xts - Convert to skcipher
the XTS mode is based on ECB, so the mode must select
ECB otherwise it can fail to initialize.

Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4_core: Fix VF overwrite of module param which disables DMFS on new probed PFs

[ Upstream commit 95f1ba9a24af9769f6e20dfe9a77c863f253f311 ]

In the VF driver, module parameter mlx4_log_num_mgm_entry_size was
mistakenly overwritten -- and in a manner which overrode the
device-managed flow steering option encoded in the parameter.

log_num_mgm_entry_size is a global module parameter which
affects all ConnectX-3 PFs installed on that host.
If a VF changes log_num_mgm_entry_size, this will affect all PFs
which are probed subsequent to the change (by disabling DMFS for
those PFs).

Fixes: 3c439b5586e9 ("mlx4_core: Allow choosing flow steering mode")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sparc64: Migrate hvcons irq to panicked cpu

[ Upstream commit 7dd4fcf5b70694dc961eb6b954673e4fc9730dbd ]

On panic, all other CPUs are stopped except the one which had
hit panic. To keep console alive, we need to migrate hvcons irq
to panicked CPU.

Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/linear: shutup lockdep warnning

[ Upstream commit d939cdfde34f50b95254b375f498447c82190b3e ]

Commit 03a9e24(md linear: fix a race between linear_add() and
linear_congested()) introduces the warnning.

Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: do not wait for writeback in write_begin

[ Upstream commit 86d54795c94532075d862aa0a79f0c981dab4bdd ]

Otherwise we can get livelock like below.

[79880.428136] dbench          D    0 18405  18404 0x00000000
[79880.428139] Call Trace:
[79880.428142]  __schedule+0x219/0x6b0
[79880.428144]  schedule+0x36/0x80
[79880.428147]  schedule_timeout+0x243/0x2e0
[79880.428152]  ? update_sd_lb_stats+0x16b/0x5f0
[79880.428155]  ? ktime_get+0x3c/0xb0
[79880.428157]  io_schedule_timeout+0xa6/0x110
[79880.428161]  __lock_page+0xf7/0x130
[79880.428164]  ? unlock_page+0x30/0x30
[79880.428167]  pagecache_get_page+0x16b/0x250
[79880.428171]  grab_cache_page_write_begin+0x20/0x40
[79880.428182]  f2fs_write_begin+0xa2/0xdb0 [f2fs]
[79880.428192]  ? f2fs_mark_inode_dirty_sync+0x16/0x30 [f2fs]
[79880.428197]  ? kmem_cache_free+0x79/0x200
[79880.428203]  ? __mark_inode_dirty+0x17f/0x360
[79880.428206]  generic_perform_write+0xbb/0x190
[79880.428213]  ? file_update_time+0xa4/0xf0
[79880.428217]  __generic_file_write_iter+0x19b/0x1e0
[79880.428226]  f2fs_file_write_iter+0x9c/0x180 [f2fs]
[79880.428231]  __vfs_write+0xc5/0x140
[79880.428235]  vfs_write+0xb2/0x1b0
[79880.428238]  SyS_write+0x46/0xa0
[79880.428242]  entry_SYSCALL_64_fastpath+0x1e/0xad

Fixes: cae96a5c8ab6 ("f2fs: check io submission more precisely")
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: send, fix failure to rename top level inode due to name collision

[ Upstream commit 4dd9920d991745c4a16f53a8f615f706fbe4b3f7 ]

Under certain situations, an incremental send operation can fail due to a
premature attempt to create a new top level inode (a direct child of the
subvolume/snapshot root) whose name collides with another inode that was
removed from the send snapshot.

Consider the following example scenario.

Parent snapshot:

  .                 (ino 256, gen 8)
  |---- a1/         (ino 257, gen 9)
  |---- a2/         (ino 258, gen 9)

Send snapshot:

  .                 (ino 256, gen 3)
  |---- a2/         (ino 257, gen 7)

In this scenario, when receiving the incremental send stream, the btrfs
receive command fails like this (ran in verbose mode, -vv argument):

  rmdir a1
  mkfile o257-7-0
  rename o257-7-0 -> a2
  ERROR: rename o257-7-0 -> a2 failed: Is a directory

What happens when computing the incremental send stream is:

1) An operation to remove the directory with inode number 257 and
   generation 9 is issued.

2) An operation to create the inode with number 257 and generation 7 is
   issued. This creates the inode with an orphanized name of "o257-7-0".

3) An operation rename the new inode 257 to its final name, "a2", is
   issued. This is incorrect because inode 258, which has the same name
   and it's a child of the same parent (root inode 256), was not yet
   processed and therefore no rmdir operation for it was yet issued.
   The rename operation is issued because we fail to detect that the
   name of the new inode 257 collides with inode 258, because their
   parent, a subvolume/snapshot root (inode 256) has a different
   generation in both snapshots.

So fix this by ignoring the generation value of a parent directory that
matches a root inode (number 256) when we are checking if the name of the
inode currently being processed collides with the name of some other
inode that was not yet processed.

We can achieve this scenario of different inodes with the same number but
different generation values either by mounting a filesystem with the inode
cache option (-o inode_cache) or by creating and sending snapshots across
different filesystems, like in the following example:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt
  $ mkdir /mnt/a1
  $ mkdir /mnt/a2
  $ btrfs subvolume snapshot -r /mnt /mnt/snap1
  $ btrfs send /mnt/snap1 -f /tmp/1.snap
  $ umount /mnt

  $ mkfs.btrfs -f /dev/sdc
  $ mount /dev/sdc /mnt
  $ touch /mnt/a2
  $ btrfs subvolume snapshot -r /mnt /mnt/snap2
  $ btrfs receive /mnt -f /tmp/1.snap
  # Take note that once the filesystem is created, its current
  # generation has value 7 so the inode from the second snapshot has
  # a generation value of 7. And after receiving the first snapshot
  # the filesystem is at a generation value of 10, because the call to
  # create the second snapshot bumps the generation to 8 (the snapshot
  # creation ioctl does a transaction commit), the receive command calls
  # the snapshot creation ioctl to create the first snapshot, which bumps
  # the filesystem's generation to 9, and finally when the receive
  # operation finishes it calls an ioctl to transition the first snapshot
  # (snap1) from RW mode to RO mode, which does another transaction commit
  # and bumps the filesystem's generation to 10.
  $ rm -f /tmp/1.snap
  $ btrfs send /mnt/snap1 -f /tmp/1.snap
  $ btrfs send -p /mnt/snap1 /mnt/snap2 -f /tmp/2.snap
  $ umount /mnt

  $ mkfs.btrfs -f /dev/sdd
  $ mount /dev/sdd /mnt
  $ btrfs receive /mnt /tmp/1.snap
  # Receive of snapshot snap2 used to fail.
  $ btrfs receive /mnt /tmp/2.snap

Signed-off-by: Robbie Ko <robbieko@synology.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[Rewrote changelog to be more precise and clear]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: xilinx: Fix error handling

[ Upstream commit ca1c39ef76376b67303d01f94fe98bb68bb3861a ]

Reorder error handling labels in order to match the way resources have
been allocated.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_ct_expect: Change __nf_ct_expect_check() return value.

[ Upstream commit 4b86c459c7bee3acaf92f0e2b4c6ac803eaa1a58 ]

Commit 4dee62b1b9b4 ("netfilter: nf_ct_expect: nf_ct_expect_insert()
returns void") inadvertently changed the successful return value of
nf_ct_expect_related_report() from 0 to 1 due to
__nf_ct_expect_check() returning 1 on success.  Prevent this
regression in the future by changing the return value of
__nf_ct_expect_check() to 0 on success.

Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4_en: fix overflow in mlx4_en_init_timestamp()

[ Upstream commit 47d3a07528ecbbccf53bc4390d70b4e3d1c04fcf ]

The cited commit makes a great job of finding optimal shift/multiplier
values assuming a 10 seconds wrap around, but forgot to change the
overflow_period computation.

It overflows in cyclecounter_cyc2ns(), and the final result is 804 ms,
which is silly.

Lets simply use 5 seconds, no need to recompute this, given how it is
supposed to work.

Later, we will use a timer instead of a work queue, since the new RX
allocation schem will no longer need mlx4_en_recover_from_oom() and the
service_task firing every 250 ms.

Fixes: 31c128b66e5b ("net/mlx4_en: Choose time-stamping shift value according to HW frequency")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Eugenia Emantayev <eugenia@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: fix power saving clients handling in iwlwifi

[ Upstream commit d98937f4ea713d21e0fcc345919f86c877dd8d6f ]

iwlwifi now supports RSS and can't let mac80211 track the
PS state based on the Rx frames since they can come out of
order. iwlwifi is now advertising AP_LINK_PS, and uses
explicit notifications to teach mac80211 about the PS state
of the stations and the PS poll / uAPSD trigger frames
coming our way from the peers.

Because of that, the TIM stopped being maintained in
mac80211. I tried to fix this in commit c68df2e7be0c
("mac80211: allow using AP_LINK_PS with mac80211-generated TIM IE")
but that was later reverted by Felix in commit 6c18a6b4e799
("Revert "mac80211: allow using AP_LINK_PS with mac80211-generated TIM IE")
since it broke drivers that do not implement set_tim.

Since none of the drivers that set AP_LINK_PS have the
set_tim() handler set besides iwlwifi, I can bail out in
__sta_info_recalc_tim if AP_LINK_PS AND .set_tim is not
implemented.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211_hwsim: check HWSIM_ATTR_RADIO_NAME length

[ Upstream commit ff4dd73dd2b4806419f8ff65cbce11d5019548d0 ]

Unfortunately, the nla policy was defined to have HWSIM_ATTR_RADIO_NAME
as an NLA_STRING, rather than NLA_NUL_STRING, so we can't use it as a
NUL-terminated string in the kernel.

Rather than break the API, kasprintf() the string to a new buffer to
guarantee NUL termination.

Reported-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

irqchip/crossbar: Fix incorrect type of local variables

[ Upstream commit b28ace12661fbcfd90959c1e84ff5a85113a82a1 ]

The max and entry variables are unsigned according to the dt-bindings.
Fix following 3 sparse issues (-Wtypesign):

  drivers/irqchip/irq-crossbar.c:222:52: warning: incorrect type in argument 3 (different signedness)
  drivers/irqchip/irq-crossbar.c:222:52:    expected unsigned int [usertype] *out_value
  drivers/irqchip/irq-crossbar.c:222:52:    got int *<noident>

  drivers/irqchip/irq-crossbar.c:245:56: warning: incorrect type in argument 4 (different signedness)
  drivers/irqchip/irq-crossbar.c:245:56:    expected unsigned int [usertype] *out_value
  drivers/irqchip/irq-crossbar.c:245:56:    got int *<noident>

  drivers/irqchip/irq-crossbar.c:263:56: warning: incorrect type in argument 4 (different signedness)
  drivers/irqchip/irq-crossbar.c:263:56:    expected unsigned int [usertype] *out_value
  drivers/irqchip/irq-crossbar.c:263:56:    got int *<noident>

Signed-off-by: Franck Demathieu <fdemathieu@gmail.com>
Cc: marc.zyngier@arm.com
Cc: jason@lakedaemon.net
Link: http://lkml.kernel.org/r/20170223094855.6546-1-fdemathieu@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: kempld: fix gcc-4.3 build

[ Upstream commit 3736d4eb6af37492aeded7fec0072dedd959c842 ]

gcc-4.3 can't decide whether the constant value in
kempld_prescaler[PRESCALER_21] is built-time constant or
not, and gets confused by the logic in do_div():

drivers/watchdog/kempld_wdt.o: In function `kempld_wdt_set_stage_timeout':
kempld_wdt.c:(.text.kempld_wdt_set_stage_timeout+0x130): undefined reference to `__aeabi_uldivmod'

This adds a call to ACCESS_ONCE() to force it to not consider
it to be constant, and leaves the more efficient normal case
in place for modern compilers, using an #ifdef to annotate
why we do this hack.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

locking/lockdep: Add nest_lock integrity test

[ Upstream commit 7fb4a2cea6b18dab56d609530d077f168169ed6b ]

Boqun reported that hlock->references can overflow. Add a debug test
for that to generate a clear error when this happens.

Without this, lockdep is likely to report a mysterious failure on
unlock.

Reported-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicolai Hähnle <Nicolai.Haehnle@amd.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "bsg-lib: don't free job in bsg_prepare_job"

This reverts commit 668cee82cd28d2c38a99f7cbddf3b3fd58f257b9 which was
commit f507b54dccfd8000c517d740bc45f20c74532d18 upstream.

Ben reports:
That function doesn't exist here (it was introduced in 4.13).
Instead, this backport has modified bsg_create_job(), creating a
leak.  Please revert this on the 3.18, 4.4 and 4.9 stable
branches.

So I'm dropping it from here.

Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

tipc: use only positive error codes in messages

[ Upstream commit aad06212d36cf34859428a0a279e5c14ee5c9e26 ]

In commit e3a77561e7d32 ("tipc: split up function tipc_msg_eval()"),
we have updated the function tipc_msg_lookup_dest() to set the error
codes to negative values at destination lookup failures. Thus when
the function sets the error code to -TIPC_ERR_NO_NAME, its inserted
into the 4 bit error field of the message header as 0xf instead of
TIPC_ERR_NO_NAME (1). The value 0xf is an unknown error code.

In this commit, we set only positive error code.

Fixes: e3a77561e7d32 ("tipc: split up function tipc_msg_eval()")
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>