powerpc/mm/radix: Split linear mapping on hot-unplug

commit 4dd5f8a99e791a8c6500e3592f3ce81ae7edcde1 upstream.

This patch splits the linear mapping if the hot-unplug range is
smaller than the mapping size. The code detects if the mapping needs
to be split into a smaller size and if so, uses the stop machine
infrastructure to clear the existing mapping and then remap the
remaining range using a smaller page size.

The code will skip any region of the mapping that overlaps with kernel
text and warn about it once. We don't want to remove a mapping where
the kernel text and the LMB we intend to remove overlap in the same
TLB mapping as it may affect the currently executing code.

I've tested these changes under a kvm guest with 2 vcpus, from a split
mapping point of view, some of the caveats mentioned above applied to
the testing I did.

Fixes: 4b5d62ca17a1 ("powerpc/mm: add radix__remove_section_mapping()")
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[mpe: Tweak change log to match updated behaviour]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: sun4i_ss_prng - convert lock to _bh in sun4i_ss_prng_generate

commit 2e7d1d61ea6c0f1c4da5eb82cafac750d55637a7 upstream.

Lockdep detects a possible deadlock in sun4i_ss_prng_generate() and
throws an "inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage" warning.
Disabling softirqs to fix this.

Fixes: b8ae5c7387ad ("crypto: sun4i-ss - support the Security System PRNG")
Signed-off-by: Artem Savkov <artem.savkov@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: sun4i_ss_prng - fix return value of sun4i_ss_prng_generate

commit dd78c832ffaf86eb6434e56de4bc3bc31f03f771 upstream.

According to crypto/rng.h generate function should return 0 on success
and < 0 on error.

Fixes: b8ae5c7387ad ("crypto: sun4i-ss - support the Security System PRNG")
Signed-off-by: Artem Savkov <artem.savkov@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

compiler-gcc.h: __nostackprotector needs gcc-4.4 and up

commit d9afaaa4ff7af8b87d4a205e48cb8a6f666d7f01 upstream.

Gcc versions before 4.4 do not recognize the __optimize__ compiler
attribute:

    warning: ‘__optimize__’ attribute directive ignored

Fixes: 7375ae3a0b79ea07 ("compiler-gcc.h: Introduce __nostackprotector function attribute")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

compiler-gcc.h: Introduce __optimize function attribute

commit df5d45aa08f848b79caf395211b222790534ccc7 upstream.

Create a new function attribute __optimize, which allows to specify an
optimization level on a per-function basis.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64/compat: Clear registers for compat syscalls, to reduce speculation attack surface

commit 6b8cf5cc9965673951f1ab3f0e3cf23d06e3e2ee upstream.

At entry userspace may have populated registers with values that could
otherwise be useful in a speculative execution attack. Clear them to
minimize the kernel's attack surface.

Originally-From: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/151787989697.7847.4083702787288600552.stgit@dwillia2-desk3.amr.corp.intel.com
[ Made small improvements to the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/entry/64: Clear extra registers beyond syscall arguments, to reduce speculation attack surface

commit 8e1eb3fa009aa7c0b944b3c8b26b07de0efb3200 upstream.

At entry userspace may have (maliciously) populated the extra registers
outside the syscall calling convention with arbitrary values that could
be useful in a speculative execution (Spectre style) attack.

Clear these registers to minimize the kernel's attack surface.

Note, this only clears the extra registers and not the unused
registers for syscalls less than 6 arguments, since those registers are
likely to be clobbered well before their values could be put to use
under speculation.

Note, Linus found that the XOR instructions can be executed with
minimized cost if interleaved with the PUSH instructions, and Ingo's
analysis found that R10 and R11 should be included in the register
clearing beyond the typical 'extra' syscall calling convention
registers.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/151787988577.7847.16733592218894189003.stgit@dwillia2-desk3.amr.corp.intel.com
[ Made small improvements to the changelog and the code comments. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: PM: Make APM idle driver initialize polling state

commit f859422075165e32c00c8d75d63f300015cc07ae upstream.

Update the APM driver overlooked by commit 1b39e3f813b4 (cpuidle: Make
drivers initialize polling state) to initialize the polling state like
the other cpuidle drivers modified by that commit to prevent cpuidle
from crashing.

Fixes: 1b39e3f813b4 (cpuidle: Make drivers initialize polling state)
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/xen: init %gs very early to avoid page faults with stack protector

commit 4f277295e54c5b7340e48efea3fc5cc21a2872b7 upstream.

When running as Xen pv guest %gs is initialized some time after
C code is started. Depending on stack protector usage this might be
too late, resulting in page faults.

So setup %gs and MSR_GS_BASE in assembly code already.

Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Tested-by: Chris Patterson <cjp256@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kexec: Make kexec (mostly) work in 5-level paging mode

commit 5bf30316991d5bcda046343ee77d823cf16fdd03 upstream.

Currently kexec() will crash when switching into a 5-level paging
enabled kernel.

I missed that we need to change relocate_kernel() to set CR4.LA57
flag if the kernel has 5-level paging enabled.

I avoided using #ifdef CONFIG_X86_5LEVEL here and inferred if we need to
enable 5-level paging from previous CR4 value. This way the code is
ready for boot-time switching between paging modes.

With this patch applied, in addition to kexec 4-to-4 which always worked,
we can kexec 4-to-5 and 5-to-5 - while 5-to-4 will need more work.

Reported-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Baoquan He <bhe@redhat.com>
Cc: <stable@vger.kernel.org> # v4.14+
Cc: Borislav Petkov <bp@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Fixes: 77ef56e4f0fb ("x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y")
Link: http://lkml.kernel.org/r/20180129110845.26633-1-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/gpu: add CFL to early quirks

commit 33aa69ed8aacd92dea12671e52eb3ca6ac2d7a49 upstream.

CFL was missing from intel_early_ids[]. The PCI ID needs to be there to
allow the memory region to be stolen, otherwise we could have RAM being
arbitrarily overwritten if for example we keep using the UEFI framebuffer,
depending on how BIOS has set up the e820 map.

Fixes: b056f8f3d6b9 ("drm/i915/cfl: Add Coffee Lake PCI IDs for S Skus.")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Cc: <stable@vger.kernel.org> # v4.13+ 0890540e21cf drm/i915: add GT number to intel_device_info
Cc: <stable@vger.kernel.org> # v4.13+ 41693fd52373 drm/i915/kbl: Change a KBL pci id to GT2 from GT1.5
Cc: <stable@vger.kernel.org> # v4.13+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171213200425.2954-1-lucas.demarchi@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/kbl: Change a KBL pci id to GT2 from GT1.5

commit 41693fd5237397d3c61b311af0fda1f6f39297c2 upstream.

See Mesa commit 9c588ff

Cc: Matt Turner <mattst88@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170920203126.1323-1-anuj.phogat@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: add GT number to intel_device_info

commit 0890540e21cf1156b4cf960a4c1c734db4e816f9 upstream.

Up to Coffeelake we could deduce this GT number from the device ID.
This doesn't seem to be the case anymore. This change reorders pciids
per GT and adds a gt field to intel_device_info. We set this field on
the following platforms :

   - SNB/IVB/HSW/BDW/SKL/KBL/CFL/CNL

Before & After :

$ modinfo drivers/gpu/drm/i915/i915.ko | grep ^alias | wc -l
209

v2: Add SNB & IVB (Chris)

v3: Fix compilation error in early-quirks (Lionel)

v4: Fix inconsistency between FEATURE/PLATFORM macros (Ville)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170830161208.29221-2-lionel.g.landwerlin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: spear13xx: Fix spics gpio controller's warning

commit f8975cb1b8a36d0839b6365235778dd9df1d04ca upstream.

This fixes the following warning by also sending the flags argument for
gpio controllers:

Property 'cs-gpios', cell 6 is not a phandle reference in
/ahb/apb/spi@e0100000

Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes")
Cc: stable@vger.kernel.org # v3.8+
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: spear13xx: Fix dmas cells

commit cdd10409914184c7eee5ae3e11beb890c9c16c61 upstream.

The "dmas" cells for the designware DMA controller need to have only 3
properties apart from the phandle: request line, src master and
destination master. But the commit 6e8887f60f60 updated it incorrectly
while moving from platform code to DT. Fix it.

Cc: stable@vger.kernel.org # v3.10+
Fixes: 6e8887f60f60 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: spear600: Add missing interrupt-parent of rtc

commit 6ffb5b4f248fe53e0361b8cbc2a523b432566442 upstream.

The interrupt-parent of rtc was missing, add it.

Fixes: 8113ba917dfa ("ARM: SPEAr: DT: Update device nodes")
Cc: stable@vger.kernel.org # v3.8+
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: dts: mt7623: fix card detection issue on bananapi-r2

commit b96a696fb2a8dd1ee4e6cfee48dcac270fc53287 upstream.

Fix that bananapi-r2 booting from SD-card would fail since incorrect
polarity is applied to the previous setup with GPIO_ACTIVE_HIGH.

Cc: stable@vger.kernel.org
Fixes: 0eed8d097612 ("arm: dts: mt7623: Add SD-card and EMMC to bananapi-r2")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Tested-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: nomadik: add interrupt-parent for clcd

commit e8bfa0422469cdfc86be3f525f621b1d44d2481b upstream.

The clcd device is lacking an interrupt-parent property, which makes
the interrupt unusable and shows up as a warning with the latest
dtc version:

arch/arm/boot/dts/ste-nomadik-s8815.dtb: Warning (interrupts_property): Missing interrupt-parent for /amba/clcd@10120000
arch/arm/boot/dts/ste-nomadik-nhk15.dtb: Warning (interrupts_property): Missing interrupt-parent for /amba/clcd@10120000

I looked up the old board files and found that this interrupt has
the same irqchip as all the other on-chip device, it just needs one
extra line.

Fixes: 17470b7da11c ("ARM: dts: add the CLCD LCD display to the NHK15")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property

commit 7ac1f59c09a61e6af6622df6809e003b0af07f3d upstream.

The GPIO polarity is missing in the hdmi,hpd-gpio property, this
fixes the following DT warnings:

arch/arm/boot/dts/stih410-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property
size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000

arch/arm/boot/dts/stih407-b2120.dtb: Warning (gpios_property): hdmi,hpd-gpio property
size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000

arch/arm/boot/dts/stih410-b2260.dtb: Warning (gpios_property): hdmi,hpd-gpio property
size (8) too small for cell size 2 in /soc/sti-display-subsystem/sti-hdmi@8d04000

[arnd: marked Cc:stable since this warning shows up with the latest dtc
       by default, and is more likely to actually cause problems than the
       other patches from this series]

Cc: stable@vger.kernel.org
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: lpc3250: fix uda1380 gpio numbers

commit ca32e0c4bf9ca4b87089c5a5ce945e5f2ec890da upstream.

dtc warns about obviously incorrect GPIO numbers for the audio codec
on both lpc32xx boards:

arch/arm/boot/dts/lpc3250-phy3250.dtb: Warning (gpios_property): reset-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18
arch/arm/boot/dts/lpc3250-phy3250.dtb: Warning (gpios_property): power-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18
arch/arm/boot/dts/lpc3250-ea3250.dtb: Warning (gpios_property): reset-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18
arch/arm/boot/dts/lpc3250-ea3250.dtb: Warning (gpios_property): power-gpio property size (12) too small for cell size 3 in /ahb/apb/i2c@400A0000/uda1380@18

It looks like the nodes are written for a different binding that combines
the GPIO number into a single number rather than a bank/number pair.
I found the right numbers on stackexchange.com, so this patch fixes
the warning and has a reasonable chance of getting things to actually
work.

Cc: stable@vger.kernel.org
Link: https://unix.stackexchange.com/questions/59497/alsa-asoc-how-to-correctly-load-devices-drivers/62217#62217
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: msm8916: Correct ipc references for smsm

commit 566bd8902e7fa20bd412ed753e09e89c1c96939c upstream.

SMSM is not symmetrical, the incoming bits from WCNSS are available at
index 6, but the outgoing host id for WCNSS is 3. Further more, upstream
references the base of APCS (in contrast to downstream), so the register
offset of 8 must be included.

Fixes: 1fb47e0a9ba4 ("arm64: dts: qcom: msm8916: Add smsm and smp2p nodes")
Cc: stable@vger.kernel.org
Reported-by: Ramon Fried <rfried@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: fix handling of -1 in set{,fs}[gu]id16 syscalls

commit 6dd0d2d22aa363fec075cb2577ba273ac8462e94 upstream.

For some reason, the implementation of some 16-bit ID system calls
(namely, setuid16/setgid16 and setfsuid16/setfsgid16) used type cast
instead of low2highgid/low2highuid macros for converting [GU]IDs, which
led to incorrect handling of value of -1 (which ought to be considered
invalid).

Discovered by strace test suite.

Cc: stable@vger.kernel.org
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dma-buf: fix reservation_object_wait_timeout_rcu once more v2

commit 5bffee867df7494ecd32c1e6ec4e8fc934c521b7 upstream.

We need to set shared_count even if we already have a fence to wait for.

v2: init i to -1 as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Tested-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180122200003.6665-1-christian.koenig@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc: Fix DABR match on hash based systems

commit f23ab3efb1b30cc5c5ef5ae4ef294ed467f30675 upstream.

Commit 398a719d34a1 ("powerpc/mm: Update bits used to skip hash_page")
mistakenly dropped the DSISR_DABRMATCH bit from the mask of bit tested
to skip trying to hash a page.

As a result, the DABR matches would no longer be detected.

This adds it back. We open code it in the 2 places where it matters
rather than fold it into DSISR_BAD_FAULT_32S/64S because this isn't
technically a bad fault and while we would never hit it with the
current code, I prefer if page_fault_is_bad() didn't trigger on these.

Fixes: 398a719d34a1 ("powerpc/mm: Update bits used to skip hash_page")
Cc: stable@vger.kernel.org # v4.14
Tested-by: Pedro Miraglia Franco de Carvalho <pedromfc@br.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/xive: Use hw CPU ids when configuring the CPU queues

commit 8e036c8d30a2cd9d8fc7442fbf6824e0a3e986e7 upstream.

The CPU event notification queues on sPAPR should be configured using
a hardware CPU identifier.

The problem did not show up on the Power Hypervisor because pHyp
supports 8 threads per core which keeps CPU number contiguous. This is
not the case on all sPAPR virtual machines, some use SMT=1.

Also improve error logging by adding the CPU number.

Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/mm: Flush radix process translations when setting MMU type

commit 62e984ddfd6b056d399e24113f5e6a7145e579d8 upstream.

Radix guests do normally invalidate process-scoped translations when a
new pid is allocated but migrated guests do not invalidate these so
migrated guests crash sometime, especially easy to reproduce with
migration happening within first 10 seconds after the guest boot start
on the same machine.

This adds the "Invalidate process-scoped translations" flush to fix
radix guests migration.

Fixes: 2ee13be34b13 ("KVM: PPC: Book3S HV: Update kvmppc_set_arch_compat() for ISA v3.00")
Cc: stable@vger.kernel.org # v4.10+
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Laurent Vivier <lvivier@redhat.com>
Tested-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/numa: Invalidate numa_cpu_lookup_table on cpu remove

commit 1d9a090783bef19fe8cdec878620d22f05191316 upstream.

When DLPAR removing a CPU, the unmapping of the cpu from a node in
unmap_cpu_from_node() should also invalidate the CPUs entry in the
numa_cpu_lookup_table. There is not a guarantee that on a subsequent
DLPAR add of the CPU the associativity will be the same and thus
could be in a different node. Invalidating the entry in the
numa_cpu_lookup_table causes the associativity to be read from the
device tree at the time of the add.

The current behavior of not invalidating the CPUs entry in the
numa_cpu_lookup_table can result in scenarios where the the topology
layout of CPUs in the partition does not match the device tree
or the topology reported by the HMC.

This bug looks like it was introduced in 2004 in the commit titled
"ppc64: cpu hotplug notifier for numa", which is 6b15e4e87e32 in the
linux-fullhist tree. Hence tag it for all stable releases.

Cc: stable@vger.kernel.org
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/radix: Remove trace_tlbie call from radix__flush_tlb_all

commit 8d81296cfcce89013a714feb8d25004a156f8181 upstream.

radix__flush_tlb_all() is called only in kexec path in real mode and any
tracepoints at this stage will make kexec to fail if enabled.

To verify enable tlbie trace before kexec.

$ echo 1 > /sys/kernel/debug/tracing/events/powerpc/tlbie/enable
== kexec into new kernel and kexec fails.

Fix this by not calling trace_tlbie from radix__flush_tlb_all().

Fixes: 0428491cba92 ("powerpc/mm: Trace tlbie(l) instructions")
Cc: stable@vger.kernel.org # v4.13+
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: try a blocking lock before return AOP_TRUNCATED_PAGE

commit ff26cc10aec128c3f86b5611fd5f59c71d49c0e3 upstream.

If we can't get inode lock immediately in the function
ocfs2_inode_lock_with_page() when reading a page, we should not return
directly here, since this will lead to a softlockup problem when the
kernel is configured with CONFIG_PREEMPT is not set.  The method is to
get a blocking lock and immediately unlock before returning, this can
avoid CPU resource waste due to lots of retries, and benefits fairness
in getting lock among multiple nodes, increase efficiency in case
modifying the same file frequently from multiple nodes.

The softlockup crash (when set /proc/sys/kernel/softlockup_panic to 1)
looks like:

  Kernel panic - not syncing: softlockup: hung tasks
  CPU: 0 PID: 885 Comm: multi_mmap Tainted: G L 4.12.14-6.1-default #1
  Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
  Call Trace:
    <IRQ>
    dump_stack+0x5c/0x82
    panic+0xd5/0x21e
    watchdog_timer_fn+0x208/0x210
    __hrtimer_run_queues+0xcc/0x200
    hrtimer_interrupt+0xa6/0x1f0
    smp_apic_timer_interrupt+0x34/0x50
    apic_timer_interrupt+0x96/0xa0
    </IRQ>
   RIP: 0010:unlock_page+0x17/0x30
   RSP: 0000:ffffaf154080bc88 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
   RAX: dead000000000100 RBX: fffff21e009f5300 RCX: 0000000000000004
   RDX: dead0000000000ff RSI: 0000000000000202 RDI: fffff21e009f5300
   RBP: 0000000000000000 R08: 0000000000000000 R09: ffffaf154080bb00
   R10: ffffaf154080bc30 R11: 0000000000000040 R12: ffff993749a39518
   R13: 0000000000000000 R14: fffff21e009f5300 R15: fffff21e009f5300
    ocfs2_inode_lock_with_page+0x25/0x30 [ocfs2]
    ocfs2_readpage+0x41/0x2d0 [ocfs2]
    filemap_fault+0x12b/0x5c0
    ocfs2_fault+0x29/0xb0 [ocfs2]
    __do_fault+0x1a/0xa0
    __handle_mm_fault+0xbe8/0x1090
    handle_mm_fault+0xaa/0x1f0
    __do_page_fault+0x235/0x4b0
    trace_do_page_fault+0x3c/0x110
    async_page_fault+0x28/0x30
   RIP: 0033:0x7fa75ded638e
   RSP: 002b:00007ffd6657db18 EFLAGS: 00010287
   RAX: 000055c7662fb700 RBX: 0000000000000001 RCX: 000055c7662fb700
   RDX: 0000000000001770 RSI: 00007fa75e909000 RDI: 000055c7662fb700
   RBP: 0000000000000003 R08: 000000000000000e R09: 0000000000000000
   R10: 0000000000000483 R11: 00007fa75ded61b0 R12: 00007fa75e90a770
   R13: 000000000000000e R14: 0000000000001770 R15: 0000000000000000

About performance improvement, we can see the testing time is reduced,
and CPU utilization decreases, the detailed data is as follows.  I ran
multi_mmap test case in ocfs2-test package in a three nodes cluster.

Before applying this patch:
    PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     TIME+ COMMAND
   2754 ocfs2te+  20   0  170248   6980   4856 D 80.73 0.341   0:18.71 multi_mmap
   1505 root      rt   0  222236 123060  97224 S 2.658 6.015   0:01.44 corosync
      5 root      20   0       0      0      0 S 1.329 0.000   0:00.19 kworker/u8:0
     95 root      20   0       0      0      0 S 1.329 0.000   0:00.25 kworker/u8:1
   2728 root      20   0       0      0      0 S 0.997 0.000   0:00.24 jbd2/sda1-33
   2721 root      20   0       0      0      0 S 0.664 0.000   0:00.07 ocfs2dc-3C8CFD4
   2750 ocfs2te+  20   0  142976   4652   3532 S 0.664 0.227   0:00.28 mpirun

  ocfs2test@tb-node2:~>multiple_run.sh -i ens3 -k ~/linux-4.4.21-69.tar.gz -o ~/ocfs2mullog -C hacluster -s pcmk -n tb-node2,tb-node1,tb-node3 -d /dev/sda1 -b 4096 -c 32768 -t multi_mmap /mnt/shared
  Tests with "-b 4096 -C 32768"
  Thu Dec 28 14:44:52 CST 2017
  multi_mmap..................................................Passed.
  Runtime 783 seconds.

After apply this patch:

    PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     TIME+ COMMAND
   2508 ocfs2te+  20   0  170248   6804   4680 R 54.00 0.333   0:55.37 multi_mmap
    155 root      20   0       0      0      0 S 2.667 0.000   0:01.20 kworker/u8:3
     95 root      20   0       0      0      0 S 2.000 0.000   0:01.58 kworker/u8:1
   2504 ocfs2te+  20   0  142976   4604   3480 R 1.667 0.225   0:01.65 mpirun
      5 root      20   0       0      0      0 S 1.000 0.000   0:01.36 kworker/u8:0
   2482 root      20   0       0      0      0 S 1.000 0.000   0:00.86 jbd2/sda1-33
    299 root       0 -20       0      0      0 S 0.333 0.000   0:00.13 kworker/2:1H
    335 root       0 -20       0      0      0 S 0.333 0.000   0:00.17 kworker/1:1H
    535 root      20   0   12140   7268   1456 S 0.333 0.355   0:00.34 haveged
   1282 root      rt   0  222284 123108  97224 S 0.333 6.017   0:01.33 corosync

  ocfs2test@tb-node2:~>multiple_run.sh -i ens3 -k ~/linux-4.4.21-69.tar.gz -o ~/ocfs2mullog -C hacluster -s pcmk -n tb-node2,tb-node1,tb-node3 -d /dev/sda1 -b 4096 -c 32768 -t multi_mmap /mnt/shared
  Tests with "-b 4096 -C 32768"
  Thu Dec 28 15:04:12 CST 2017
  multi_mmap..................................................Passed.
  Runtime 487 seconds.

Link: http://lkml.kernel.org/r/1514447305-30814-1-git-send-email-ghe@suse.com
Fixes: 1cce4df04f37 ("ocfs2: do not lock/unlock() inode DLM lock")
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Eric Ren <zren@suse.com>
Acked-by: alex chen <alex.chen@huawei.com>
Acked-by: piaojun <piaojun@huawei.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: resolve reset vs. remove()/shutdown() deadlocks

commit a64e7a79dd6030479caad603c8d78e6c9c14904f upstream.

Commit b014e96d1abb ("PCI: Protect pci_error_handlers->reset_notify()
usage with device_lock()") resolves races between driver reset and
removal, but it introduces some new deadlock problems. If we see a
timeout while we've already started suspending, removing, or shutting
down the driver, we might see:

(a) a worker thread, running mwifiex_pcie_work() ->
    mwifiex_pcie_card_reset_work() -> pci_reset_function()
(b) a removal thread, running mwifiex_pcie_remove() ->
    mwifiex_free_adapter() -> mwifiex_unregister() ->
    mwifiex_cleanup_pcie() -> cancel_work_sync(&card->work)

Unfortunately, mwifiex_pcie_remove() already holds the device lock that
pci_reset_function() is now requesting, and so we see a deadlock.

It's necessary to cancel and synchronize our outstanding work before
tearing down the driver, so we can't have this work wait indefinitely
for the lock.

It's reasonable to only "try" to reset here, since this will mostly
happen for cases where it's already difficult to reset the firmware
anyway (e.g., while we're suspending or powering off the system). And if
reset *really* needs to happen, we can always try again later.

Fixes: b014e96d1abb ("PCI: Protect pci_error_handlers->reset_notify() usage with device_lock()")
Cc: <stable@vger.kernel.org>
Cc: Xinming Hu <huxm@marvell.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PM / devfreq: Propagate error from devfreq_add_device()

commit d1bf2d30728f310f72296b54f0651ecdb09cbb12 upstream.

Propagate the error of devfreq_add_device() in devm_devfreq_add_device()
rather than statically returning ENOMEM. This makes it slightly faster
to pinpoint the cause of a returned error.

Fixes: 8cd84092d35e ("PM / devfreq: Add resource-managed function for devfreq device")
Cc: stable@vger.kernel.org
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

swiotlb: suppress warning when __GFP_NOWARN is set

commit d0bc0c2a31c95002d37c3cc511ffdcab851b3256 upstream.

TTM tries to allocate coherent memory in chunks of 2MB first to improve
TLB efficiency and falls back to allocating 4K pages if that fails.

Suppress the warning when the 2MB allocations fails since there is a
valid fall back path.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Mike Galbraith <efault@gmx.de>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=104082
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: powernv: Dont assume distinct pstate values for nominal and pmin

commit 3fa4680b860bf48b437d6a2c039789c4abe202ae upstream.

Some OpenPOWER boxes can have same pstate values for nominal and
pmin pstates. In these boxes the current code will not initialize
'powernv_pstate_info.min' variable and result in erroneous CPU
frequency reporting. This patch fixes this problem.

Fixes: 09ca4c9b5958 (cpufreq: powernv: Replacing pstate_id with frequency table index)
Reported-by: Alvin Wang <wangat@tw.ibm.com>
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.8+ <stable@vger.kernel.org> # 4.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/rxe: Fix rxe_qp_cleanup()

commit bb3ffb7ad48a21e98a5c64eb21103a74fd9f03f6 upstream.

rxe_qp_cleanup() can sleep so it must be run in thread context and
not in atomic context. This patch avoids that the following bug is
triggered:

Kernel BUG at 00000000560033f3 [verbose debug info unavailable]
BUG: sleeping function called from invalid context at net/core/sock.c:2761
in_atomic(): 1, irqs_disabled(): 0, pid: 7, name: ksoftirqd/0
INFO: lockdep is turned off.
Preemption disabled at:
[<00000000b6e69628>] __do_softirq+0x4e/0x540
CPU: 0 PID: 7 Comm: ksoftirqd/0 Not tainted 4.15.0-rc7-dbg+ #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
 dump_stack+0x85/0xbf
 ___might_sleep+0x177/0x260
 lock_sock_nested+0x1d/0x90
 inet_shutdown+0x2e/0xd0
 rxe_qp_cleanup+0x107/0x140 [rdma_rxe]
 rxe_elem_release+0x18/0x80 [rdma_rxe]
 rxe_requester+0x1cf/0x11b0 [rdma_rxe]
 rxe_do_task+0x78/0xf0 [rdma_rxe]
 tasklet_action+0x99/0x270
 __do_softirq+0xc0/0x540
 run_ksoftirqd+0x1c/0x70
 smpboot_thread_fn+0x1be/0x270
 kthread+0x117/0x130
 ret_from_fork+0x24/0x30

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/rxe: Fix a race condition in rxe_requester()

commit 65567e41219888feec72fee1de98ccf1efbbc16d upstream.

The rxe driver works as follows:
* The send queue, receive queue and completion queues are implemented as
  circular buffers.
* ib_post_send() and ib_post_recv() calls are serialized through a spinlock.
* Removing elements from various queues happens from tasklet
  context. Tasklets are guaranteed to run on at most one CPU. This serializes
  access to these queues. See also rxe_completer(), rxe_requester() and
  rxe_responder().
* rxe_completer() processes the skbs queued onto qp->resp_pkts.
* rxe_requester() handles the send queue (qp->sq.queue).
* rxe_responder() processes the skbs queued onto qp->req_pkts.

Since rxe_drain_req_pkts() processes qp->req_pkts, calling
rxe_drain_req_pkts() from rxe_requester() is racy. Hence this patch.

Reported-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: stable@vger.kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/rxe: Fix a race condition related to the QP error state

commit 6f301e06de4cf9ab7303f5acd43e64fcd4aa04be upstream.

The following sequence:
* Change queue pair state into IB_QPS_ERR.
* Post a work request on the queue pair.

Triggers the following race condition in the rdma_rxe driver:
* rxe_qp_error() triggers an asynchronous call of rxe_completer(), the function
  that examines the QP send queue.
* rxe_post_send() posts a work request on the QP send queue.

If rxe_completer() runs prior to rxe_post_send(), it will drain the send
queue and the driver will assume no further action is necessary.
However, once we post the send to the send queue, because the queue is
in error, no send completion will ever happen and the send will get
stuck.  In order to process the send, we need to make sure that
rxe_completer() gets run after a send is posted to a queue pair in an
error state.  This patch ensures that happens.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Moni Shoua <monis@mellanox.com>
Cc: <stable@vger.kernel.org> # v4.8
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kselftest: fix OOM in memory compaction test

commit 4c1baad223906943b595a887305f2e8124821dad upstream.

Running the compaction_test sometimes results in out-of-memory
failures. When I debugged this, it turned out that the code to
reset the number of hugepages to the initial value is simply
broken since we write into an open sysctl file descriptor
multiple times without seeking back to the start.

Adding the lseek here fixes the problem.

Cc: stable@vger.kernel.org
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://bugs.linaro.org/show_bug.cgi?id=3145
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests: seccomp: fix compile error seccomp_bpf

commit 912ec316686df352028afb6efec59e47a958a24d upstream.

aarch64-linux-gnu-gcc -Wl,-no-as-needed -Wall
    -lpthread seccomp_bpf.c -o seccomp_bpf
seccomp_bpf.c: In function 'tracer_ptrace':
seccomp_bpf.c:1720:12: error: '__NR_open' undeclared
    (first use in this function)
  if (nr == __NR_open)
            ^~~~~~~~~
seccomp_bpf.c:1720:12: note: each undeclared identifier is reported
    only once for each function it appears in
In file included from seccomp_bpf.c:48:0:
seccomp_bpf.c: In function 'TRACE_syscall_ptrace_syscall_dropped':
seccomp_bpf.c:1795:39: error: '__NR_open' undeclared
    (first use in this function)
  EXPECT_SYSCALL_RETURN(EPERM, syscall(__NR_open));
                                       ^
open(2) is a legacy syscall, replaced with openat(2) since 2.6.16.
Thus new architectures in the kernel, such as arm64, don't implement
these legacy syscalls.

Fixes: a33b2d0359a0 ("selftests/seccomp: Add tests for basic ptrace actions")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: stable@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/core: Avoid a potential OOPs for an unused optional parameter

commit 2ff124d597c2df8696169ce0006fc974c49a4569 upstream.

The ev_file is an optional parameter for CQ creation. If the parameter
is not passed, the ev_file pointer will be NULL.  Using that pointer
to set the cq_context will result in an OOPs.

Verify that ev_file is not NULL before using.

Cc: <stable@vger.kernel.org> # 4.14.x
Fixes: 9ee79fce3642 ("IB/core: Add completion queue (cq) object actions")
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/core: Fix ib_wc structure size to remain in 64 bytes boundary

commit cd2a6e7d384b043d5d029e39663061cebc949385 upstream.

The change of slid from u16 to u32 results in sizeof(struct ib_wc)
cross 64B boundary, which causes more cache misses. This patch
rearranges the fields and remain the size to 64B.

Pahole output before this change:

struct ib_wc {
        union {
                u64                wr_id;                /*           8 */
                struct ib_cqe *    wr_cqe;               /*           8 */
        };                                               /*     0     8 */
        enum ib_wc_status          status;               /*     8     4 */
        enum ib_wc_opcode          opcode;               /*    12     4 */
        u32                        vendor_err;           /*    16     4 */
        u32                        byte_len;             /*    20     4 */
        struct ib_qp *             qp;                   /*    24     8 */
        union {
                __be32             imm_data;             /*           4 */
                u32                invalidate_rkey;      /*           4 */
        } ex;                                            /*    32     4 */
        u32                        src_qp;               /*    36     4 */
        int                        wc_flags;             /*    40     4 */
        u16                        pkey_index;           /*    44     2 */

        /* XXX 2 bytes hole, try to pack */

        u32                        slid;                 /*    48     4 */
        u8                         sl;                   /*    52     1 */
        u8                         dlid_path_bits;       /*    53     1 */
        u8                         port_num;             /*    54     1 */
        u8                         smac[6];              /*    55     6 */

        /* XXX 1 byte hole, try to pack */

        u16                        vlan_id;              /*    62     2 */
        /* --- cacheline 1 boundary (64 bytes) --- */
        u8                         network_hdr_type;     /*    64     1 */

        /* size: 72, cachelines: 2, members: 17 */
        /* sum members: 62, holes: 2, sum holes: 3 */
        /* padding: 7 */
        /* last cacheline: 8 bytes */
};

Pahole output after this change:

struct ib_wc {
        union {
                u64                wr_id;                /*           8 */
                struct ib_cqe *    wr_cqe;               /*           8 */
        };                                               /*     0     8 */
        enum ib_wc_status          status;               /*     8     4 */
        enum ib_wc_opcode          opcode;               /*    12     4 */
        u32                        vendor_err;           /*    16     4 */
        u32                        byte_len;             /*    20     4 */
        struct ib_qp *             qp;                   /*    24     8 */
        union {
                __be32             imm_data;             /*           4 */
                u32                invalidate_rkey;      /*           4 */
        } ex;                                            /*    32     4 */
        u32                        src_qp;               /*    36     4 */
        u32                        slid;                 /*    40     4 */
        int                        wc_flags;             /*    44     4 */
        u16                        pkey_index;           /*    48     2 */
        u8                         sl;                   /*    50     1 */
        u8                         dlid_path_bits;       /*    51     1 */
        u8                         port_num;             /*    52     1 */
        u8                         smac[6];              /*    53     6 */

        /* XXX 1 byte hole, try to pack */

        u16                        vlan_id;              /*    60     2 */
        u8                         network_hdr_type;     /*    62     1 */

        /* size: 64, cachelines: 1, members: 17 */
        /* sum members: 62, holes: 1, sum holes: 1 */
        /* padding: 1 */
};

Fixes: 7db20ecd1d97 ("IB/core: Change wc.slid from 16 to 32 bits")
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/core: Fix two kernel warnings triggered by rxe registration

commit 02ee9da347873699603d9ce0112a80b5dd69dea1 upstream.

Eliminate the WARN_ONs that create following two warnings when
registering an rxe device:

WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/device.c:449 ib_register_device+0x591/0x640 [ib_core]
CPU: 2 PID: 1005 Comm: run_tests Not tainted 4.15.0-rc4-dbg+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:ib_register_device+0x591/0x640 [ib_core]
Call Trace:
 rxe_register_device+0x3c6/0x470 [rdma_rxe]
 rxe_add+0x543/0x5e0 [rdma_rxe]
 rxe_net_add+0x37/0xb0 [rdma_rxe]
 rxe_param_set_add+0x5a/0x120 [rdma_rxe]
 param_attr_store+0x5e/0xc0
 module_attr_store+0x19/0x30
 sysfs_kf_write+0x3d/0x50
 kernfs_fop_write+0x116/0x1a0
 __vfs_write+0x23/0x120
 vfs_write+0xbe/0x1b0
 SyS_write+0x44/0xa0
 entry_SYSCALL_64_fastpath+0x23/0x9a

WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/sysfs.c:1279 ib_device_register_sysfs+0x11d/0x160 [ib_core]
CPU: 2 PID: 1005 Comm: run_tests Tainted: G        W        4.15.0-rc4-dbg+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:ib_device_register_sysfs+0x11d/0x160 [ib_core]
Call Trace:
 ib_register_device+0x3f7/0x640 [ib_core]
 rxe_register_device+0x3c6/0x470 [rdma_rxe]
 rxe_add+0x543/0x5e0 [rdma_rxe]
 rxe_net_add+0x37/0xb0 [rdma_rxe]
 rxe_param_set_add+0x5a/0x120 [rdma_rxe]
 param_attr_store+0x5e/0xc0
 module_attr_store+0x19/0x30
 sysfs_kf_write+0x3d/0x50
 kernfs_fop_write+0x116/0x1a0
 __vfs_write+0x23/0x120
 vfs_write+0xbe/0x1b0
 SyS_write+0x44/0xa0
 entry_SYSCALL_64_fastpath+0x23/0x9a

The code should accept either a parent pointer or a fully specified DMA
specification without producing warnings.

Fixes: 99db9494035f ("IB/core: Remove ib_device.dma_device")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx4: Fix incorrectly releasing steerable UD QPs when have only ETH ports

commit 852f6927594d0d3e8632c889b2ab38cbc46476ad upstream.

Allocating steerable UD QPs depends on having at least one IB port,
while releasing those QPs does not.

As a result, when there are only ETH ports, the IB (RoCE) driver
requests releasing a qp range whose base qp is zero, with
qp count zero.

When SR-IOV is enabled, and the VF driver is running on a VM over
a hypervisor which treats such qp release calls as errors
(rather than NOPs), we see lines in the VM message log like:

 mlx4_core 0002:00:02.0: Failed to release qp range base:0 cnt:0

Fix this by adding a check for a zero count in mlx4_release_qp_range()
(which thus treats releasing 0 qps as a nop), and eliminating the
check for device managed flow steering when releasing steerable UD QPs.
(Freeing ib_uc_qpns_bitmap unconditionally is also OK, since it
remains NULL when steerable UD QPs are not allocated).

Fixes: 4196670be786 ("IB/mlx4: Don't allocate range of steerable UD QPs for Ethernet-only device")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/qib: Fix comparison error with qperf compare/swap test

commit 87b3524cb5058fdc7c2afdb92bdb2e079661ddc4 upstream.

This failure exists with qib:

ver_rc_compare_swap:
mismatch, sequence 2, expected 123456789abcdef, got 0

The request builder was using the incorrect inlines to
build the request header resulting in incorrect data
in the atomic header.

Fix by using the appropriate inlines to create the request.

Fixes: 261a4351844b ("IB/qib,IB/hfi: Use core common header file")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/umad: Fix use of unprotected device pointer

commit f23a5350e43c810ca36b26d4ed4ecd9a08686f47 upstream.

The ib_write_umad() is protected by taking the umad file mutex.
However, it accesses file->port->ib_dev -- which is protected only by the
port's mutex (field file_mutex).

The ib_umad_remove_one() calls ib_umad_kill_port() which sets
port->ib_dev to NULL under the port mutex (NOT the file mutex).
It then sets the mad agent to "dead" under the umad file mutex.

This is a race condition -- because there is a window where
port->ib_dev is NULL, while the agent is not "dead".

As a result, we saw stack traces like:

[16490.678059] BUG: unable to handle kernel NULL pointer dereference at 00000000000000b0
[16490.678246] IP: ib_umad_write+0x29c/0xa3a [ib_umad]
[16490.678333] PGD 0 P4D 0
[16490.678404] Oops: 0000 [#1] SMP PTI
[16490.678466] Modules linked in: rdma_ucm(OE) ib_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_uverbs(OE) ib_umad(OE) mlx4_en(OE) ptp pps_core mlx4_ib(OE-) ib_core(OE) mlx4_core(OE) mlx_compat
(OE) memtrack(OE) devlink mst_pciconf(OE) mst_pci(OE) netconsole nfsv3 nfs_acl nfs lockd grace fscache cfg80211 rfkill esp6_offload esp6 esp4_offload esp4 sunrpc kvm_intel kvm ppdev parport_pc irqbypass
parport joydev i2c_piix4 virtio_balloon cirrus drm_kms_helper ttm drm e1000 serio_raw virtio_pci virtio_ring virtio ata_generic pata_acpi qemu_fw_cfg [last unloaded: mlxfw]
[16490.679202] CPU: 4 PID: 3115 Comm: sminfo Tainted: G           OE   4.14.13-300.fc27.x86_64 #1
[16490.679339] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
[16490.679477] task: ffff9cf753890000 task.stack: ffffaf70c26b0000
[16490.679571] RIP: 0010:ib_umad_write+0x29c/0xa3a [ib_umad]
[16490.679664] RSP: 0018:ffffaf70c26b3d90 EFLAGS: 00010202
[16490.679747] RAX: 0000000000000010 RBX: ffff9cf75610fd80 RCX: 0000000000000000
[16490.679856] RDX: 0000000000000001 RSI: 00007ffdf2bfd714 RDI: ffff9cf6bb2a9c00

In the above trace, ib_umad_write is trying to dereference the NULL
file->port->ib_dev pointer.

Fix this by using the agent's device pointer (the device field
in struct ib_mad_agent) -- which IS protected by the umad file mutex.

Fixes: 44c58487d51a ("IB/core: Define 'ib' and 'roce' rdma_ah_attr types")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: smartpqi: allow static build ("built-in")

commit dc2db1dc5fb9ab3a43b305c2720fee5278dbee2a upstream.

If CONFIG_SCSI_SMARTPQI=y then don't build this driver as a module.

Signed-off-by: Steffen Weber <steffen.weber@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Prevent PROFILE_ALL_BRANCHES when FORTIFY_SOURCE=y

commit 68e76e034b6b1c1ce2eece1ab8ae4008e14be470 upstream.

I regularly get 50 MB - 60 MB files during kernel randconfig builds.
These large files mostly contain (many repeats of; e.g., 124,594):

In file included from ../include/linux/string.h:6:0,
                 from ../include/linux/uuid.h:20,
                 from ../include/linux/mod_devicetable.h:13,
                 from ../scripts/mod/devicetable-offsets.c:3:
../include/linux/compiler.h:64:4: warning: '______f' is static but declared in inline function 'strcpy' which is not static [enabled by default]
    ______f = {     \
    ^
../include/linux/compiler.h:56:23: note: in expansion of macro '__trace_if'
                       ^
../include/linux/string.h:425:2: note: in expansion of macro 'if'
  if (p_size == (size_t)-1 && q_size == (size_t)-1)
  ^

This only happens when CONFIG_FORTIFY_SOURCE=y and
CONFIG_PROFILE_ALL_BRANCHES=y, so prevent PROFILE_ALL_BRANCHES if
FORTIFY_SOURCE=y.

Link: http://lkml.kernel.org/r/9199446b-a141-c0c3-9678-a3f9107f2750@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.20

scsi: cxlflash: Reset command ioasc

commit 96cf727fe8f102bf92150b741db71ee39fb8c521 upstream.

In the event of a command failure, cxlflash returns the failure to the upper
layers to process. After processing the error, when the command is queued
again, the private command structure will not be zeroed and the ioasc could be
stale. Per the SISLite specification, the AFU only sets the ioasc in the
presence of a failure. Thus, even though the original command succeeds the
second time, the command is considered a failure due to stale ioasc. This
cycle repeats indefinitely and can cause a hang or IO failure.

To fix the issue, clear the ioasc before queuing any command.

[mkp: added Cc: stable per request]

Fixes: 479ad8e9d48c ("scsi: cxlflash: Remove zeroing of private command data")
Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: lpfc: Fix crash after bad bar setup on driver attachment

commit e4b9794efdce13242f4af6682f3ed48ce3864a87 upstream.

In test cases where an instance of the driver is detached and
reattached, the driver will crash on reattachment. There is a compound
if statement that will skip over the bar setup if the pci_resource_start
call is not successful. The driver erroneously returns success to its
bar setup in this scenario even though the bars aren't properly
configured.

Rework the offending code segment for proper initialization steps.  If
the pci_resource_start call fails, -ENOMEM is now returned.

Sample stack:

rport-5:0-10: blocked FC remote port time out: removing rport
BUG: unable to handle kernel NULL pointer dereference at           (null)
... lpfc_sli4_wait_bmbx_ready+0x32/0x70 [lpfc]
...
...  RIP: 0010:...  ... lpfc_sli4_wait_bmbx_ready+0x32/0x70 [lpfc]
 Call Trace:
  ... lpfc_sli4_post_sync_mbox+0x106/0x4d0 [lpfc]
  ... ? __alloc_pages_nodemask+0x176/0x420
  ... ? __kmalloc+0x2e/0x230
  ... lpfc_sli_issue_mbox_s4+0x533/0x720 [lpfc]
  ... ? mempool_alloc+0x69/0x170
  ... ? dma_generic_alloc_coherent+0x8f/0x140
  ... lpfc_sli_issue_mbox+0xf/0x20 [lpfc]
  ... lpfc_sli4_driver_resource_setup+0xa6f/0x1130 [lpfc]
  ... ? lpfc_pci_probe_one+0x23e/0x16f0 [lpfc]
  ... lpfc_pci_probe_one+0x445/0x16f0 [lpfc]
  ... local_pci_probe+0x45/0xa0
  ... work_for_cpu_fn+0x14/0x20
  ... process_one_work+0x17a/0x440

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rcu: Export init_rcu_head() and destroy_rcu_head() to GPL modules

commit 156baec39732f025dc778e00da95fc10d6e45885 upstream.

Use of init_rcu_head() and destroy_rcu_head() from modules results in
the following build-time error with CONFIG_DEBUG_OBJECTS_RCU_HEAD=y:

ERROR: "init_rcu_head" [drivers/scsi/scsi_mod.ko] undefined!
ERROR: "destroy_rcu_head" [drivers/scsi/scsi_mod.ko] undefined!

This commit therefore adds EXPORT_SYMBOL_GPL() for each to allow them to
be used by GPL-licensed kernel modules.

Reported-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: core: Ensure that the SCSI error handler gets woken up

commit 3bd6f43f5cb3714f70c591514f344389df593501 upstream.

If scsi_eh_scmd_add() is called concurrently with
scsi_host_queue_ready() while shost->host_blocked > 0 then it can
happen that neither function wakes up the SCSI error handler. Fix
this by making every function that decreases the host_busy counter
wake up the error handler if necessary and by protecting the
host_failed checks with the SCSI host lock.

Reported-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
References: https://marc.info/?l=linux-kernel&m=150461610630736
Fixes: commit 746650160866 ("scsi: convert host_busy to atomic_t")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Tested-by: Stuart Hayes <stuart.w.hayes@gmail.com>
Cc: Konstantin Khorenko <khorenko@virtuozzo.com>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ftrace: Remove incorrect setting of glob search field

commit 7b6586562708d2b3a04fe49f217ddbadbbbb0546 upstream.

__unregister_ftrace_function_probe() will incorrectly parse the glob filter
because it resets the search variable that was setup by filter_parse_regex().

Al Viro reported this:

    After that call of filter_parse_regex() we could have func_g.search not
    equal to glob only if glob started with '!' or '*'.  In the former case
    we would've buggered off with -EINVAL (not = 1).  In the latter we
    would've set func_g.search equal to glob + 1, calculated the length of
    that thing in func_g.len and proceeded to reset func_g.search back to
    glob.

    Suppose the glob is e.g. *foo*.  We end up with
    func_g.type = MATCH_MIDDLE_ONLY;
    func_g.len = 3;
    func_g.search = "*foo";
    Feeding that to ftrace_match_record() will not do anything sane - we
    will be looking for names containing "*foo" (->len is ignored for that
    one).

Link: http://lkml.kernel.org/r/20180127031706.GE13338@ZenIV.linux.org.uk
Fixes: 3ba009297149f ("ftrace: Introduce ftrace_glob structure")
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

devpts: fix error handling in devpts_mntget()

commit c9cc8d01fb04117928830449388512a5047569c9 upstream.

If devpts_ptmx_path() returns an error code, then devpts_mntget()
dereferences an ERR_PTR():

    BUG: unable to handle kernel paging request at fffffffffffffff5
    IP: devpts_mntget+0x13f/0x280 fs/devpts/inode.c:173

Fix it by returning early in the error paths.

Reproducer:

    #define _GNU_SOURCE
    #include <fcntl.h>
    #include <sched.h>
    #include <sys/ioctl.h>
    #define TIOCGPTPEER _IO('T', 0x41)

    int main()
    {
        for (;;) {
            int fd = open("/dev/ptmx", 0);
            unshare(CLONE_NEWNS);
            ioctl(fd, TIOCGPTPEER, 0);
        }
    }

Fixes: 311fc65c9fb9 ("pty: Repair TIOCGPTPEER")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mn10300/misalignment: Use SIGSEGV SEGV_MAPERR to report a failed user copy

commit 6ac1dc736b323011a55ecd1fc5897c24c4f77cbd upstream.

Setting si_code to 0 is the same a setting si_code to SI_USER which is definitely
not correct.  With si_code set to SI_USER si_pid and si_uid will be copied to
userspace instead of si_addr.  Which is very wrong.

So fix this by using a sensible si_code (SEGV_MAPERR) for this failure.

Fixes: b920de1b77b7 ("mn10300: add the MN10300/AM33 architecture to the kernel")
Cc: David Howells <dhowells@redhat.com>
Cc: Masakazu Urade <urade.masakazu@jp.panasonic.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: take mnt_want_write() for removing impure xattr

commit a5a927a7c82e28ea76599dee4019c41e372c911f upstream.

The optimization in ovl_cache_get_impure() that tries to remove an
unneeded "impure" xattr needs to take mnt_want_write() on upper fs.

Fixes: 4edb83bb1041 ("ovl: constant d_ino for non-merge dirs")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: fix failure to fsync lower dir

commit d796e77f1dd541fe34481af2eee6454688d13982 upstream.

As a writable mount, it is not expected for overlayfs to return
EINVAL/EROFS for fsync, even if dir/file is not changed.

This commit fixes the case of fsync of directory, which is easier to
address, because overlayfs already implements fsync file operation for
directories.

The problem reported by Raphael is that new PostgreSQL 10.0 with a
database in overlayfs where lower layer in squashfs fails to start.
The failure is due to fsync error, when PostgreSQL does fsync on all
existing db directories on startup and a specific directory exists
lower layer with no changes.

Reported-by: Raphael Hertzog <raphael@ouaza.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Raphaël Hertzog <hertzog@debian.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

acpi, nfit: fix register dimm error handling

commit 23fbd7c70aec7600e3227eb24259fc55bf6e4881 upstream.

A NULL pointer reference kernel bug was observed when
acpi_nfit_add_dimm() called in acpi_nfit_register_dimms() failed. This
error path does not set nfit_mem->nvdimm, but the 2nd
list_for_each_entry() loop in the function assumes it's always set. Add
a check to nfit_mem->nvdimm.

Fixes: ba9c8dd3c222 ("acpi, nfit: add dimm device notification support")
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: sbshc: remove raw pointer from printk() message

commit 43cdd1b716b26f6af16da4e145b6578f98798bf6 upstream.

There's no need to be printing a raw kernel pointer to the kernel log at
every boot.  So just remove it, and change the whole message to use the
correct dev_info() call at the same time.

Reported-by: Wang Qize <wang_qize@venustech.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Avoid PPS HW/SW state mismatch due to rounding

commit 5643205c6340b565a3be0fe0e7305dc4aa551c74 upstream.

We store a SW state of the t11_t12 timing in 100usec units but have to
program it in 100msec as required by HW. The rounding used during
programming means there will be a mismatch between the SW and HW states
of this value triggering a "PPS state mismatch" error. Avoid this by
storing the already rounded-up value in the SW state.

Note that we still calculate panel_power_cycle_delay with the finer
100usec granularity to avoid any needless waits using that version of
the delay.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103903
Cc: joks <joks@linux.pl>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171129175137.2889-1-imre.deak@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: marvell: add Ethernet aliases

commit 474c5885582c4a79c21bcf01ed98f98c935f1f4a upstream.

This patch adds Ethernet aliases in the Marvell Armada 7040 DB, 8040 DB
and 8040 mcbin device trees so that the bootloader setup the MAC
addresses correctly.

Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Antoine: commit message, small fixes]
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool: Fix switch-table detection

commit 99ce7962d52d1948ad6f2785e308d48e76e0a6ef upstream.

Linus reported that GCC-7.3 generated a switch-table construct that
confused objtool. It turns out that, in particular due to KASAN, it is
possible to have unrelated .rodata usage in between the .rodata setup
for the switch-table and the following indirect jump.

The simple linear reverse search from the indirect jump would hit upon
the KASAN .rodata usage first and fail to find a switch_table,
resulting in a spurious 'sibling call with modified stack frame'
warning.

Fix this by creating a 'jump-stack' which we can 'unwind' during
reversal, thereby skipping over much of the in-between code.

This is not fool proof by any means, but is sufficient to make the
known cases work. Future work would be to construct more comprehensive
flow analysis code.

Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180208130232.GF25235@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: Handle btrfs_set_extent_delalloc failure in fixup worker

commit f3038ee3a3f1017a1cbe9907e31fa12d366c5dcb upstream.

This function was introduced by 247e743cbe6e ("Btrfs: Use async helpers
to deal with pages that have been improperly dirtied") and it didn't do
any error handling then. This function might very well fail in ENOMEM
situation, yet it's not handled, this could lead to inconsistent state.
So let's handle the failure by setting the mapping error bit.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib/ubsan: add type mismatch handler for new GCC/Clang

commit 42440c1f9911b4b7b8ba3dc4e90c1197bc561211 upstream.

UBSAN=y fails to build with new GCC/clang:

    arch/x86/kernel/head64.o: In function `sanitize_boot_params':
    arch/x86/include/asm/bootparam_utils.h:37: undefined reference to `__ubsan_handle_type_mismatch_v1'

because Clang and GCC 8 slightly changed ABI for 'type mismatch' errors.
Compiler now uses new __ubsan_handle_type_mismatch_v1() function with
slightly modified 'struct type_mismatch_data'.

Let's add new 'struct type_mismatch_data_common' which is independent from
compiler's layout of 'struct type_mismatch_data'.  And make
__ubsan_handle_type_mismatch[_v1]() functions transform compiler-dependent
type mismatch data to our internal representation.  This way, we can
support both old and new compilers with minimal amount of change.

Link: http://lkml.kernel.org/r/20180119152853.16806-1-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Sodagudi Prasad <psodagud@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lib/ubsan.c: s/missaligned/misaligned/

commit b8fe1120b4ba342b4f156d24e952d6e686b20298 upstream.

A vist from the spelling fairy.

Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clocksource/drivers/stm32: Fix kernel panic with multiple timers

commit e0aeca3d8cbaea514eb98df1149faa918f9ec42d upstream.

The current code hides a couple of bugs:

 - The global variable 'clock_event_ddata' is overwritten each time the
   init function is invoked.

This is fixed with a kmemdup() instead of assigning the global variable. That
prevents a memory corruption when several timers are defined in the DT.

 - The clockevent's event_handler is NULL if the time framework does
   not select the clockevent when registering it, this is fine but the init
   code generates in any case an interrupt leading to dereference this
   NULL pointer.

The stm32 timer works with shadow registers, a mechanism to cache the
registers. When a change is done in one buffered register, we need to
artificially generate an event to force the timer to copy the content
of the register to the shadowed register.

The auto-reload register (ARR) is one of the shadowed register as well as
the prescaler register (PSC), so in order to force the copy, we issue an
event which in turn leads to an interrupt and the NULL dereference.

This is fixed by inverting two lines where we clear the status register
before enabling the update event interrupt.

As this kernel crash is resulting from the combination of these two bugs,
the fixes are grouped into a single patch.

Tested-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1515418139-23276-11-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

blk-mq: quiesce queue before freeing queue

commit c2856ae2f315d754a0b6a268e4c6745b332b42e7 upstream.

After queue is frozen, dispatch still may happen, for example:

1) requests are submitted from several contexts
2) requests from all these contexts are inserted to queue, but may dispatch
to LLD in one of these paths, but other paths sill need to move on even all
these requests are completed(that means blk_mq_freeze_queue_wait() returns
at that time)
3) dispatch after queue freezing still moves on and causes use-after-free,
because request queue is freed

This patch quiesces queue after it is frozen, and makes sure all
in-progress dispatch are completed.

This patch fixes the following kernel crash when running heavy IOs vs.
deleting device:

[   36.719251] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[   36.720318] IP: kyber_has_work+0x14/0x40
[   36.720847] PGD 254bf5067 P4D 254bf5067 PUD 255e6a067 PMD 0
[   36.721584] Oops: 0000 [#1] PREEMPT SMP
[   36.722105] Dumping ftrace buffer:
[   36.722570]    (ftrace buffer empty)
[   36.723057] Modules linked in: scsi_debug ebtable_filter ebtables ip6table_filter ip6_tables tcm_loop iscsi_target_mod target_core_file target_core_iblock target_core_pscsi target_core_mod xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c bridge stp llc fuse iptable_filter ip_tables sd_mod sg btrfs xor zstd_decompress zstd_compress xxhash raid6_pq mptsas mptscsih bcache crc32c_intel ahci mptbase libahci serio_raw scsi_transport_sas nvme libata shpchp lpc_ich virtio_scsi nvme_core binfmt_misc dm_mod iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi null_blk configs
[   36.733438] CPU: 2 PID: 2374 Comm: fio Not tainted 4.15.0-rc2.blk_mq_quiesce+ #714
[   36.735143] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.9.3-1.fc25 04/01/2014
[   36.736688] RIP: 0010:kyber_has_work+0x14/0x40
[   36.737515] RSP: 0018:ffffc9000209bca0 EFLAGS: 00010202
[   36.738431] RAX: 0000000000000008 RBX: ffff88025578bfc8 RCX: ffff880257bf4ed0
[   36.739581] RDX: 0000000000000038 RSI: ffffffff81a98c6d RDI: ffff88025578bfc8
[   36.740730] RBP: ffff880253cebfc8 R08: ffffc9000209bda0 R09: ffff8802554f3480
[   36.741885] R10: ffffc9000209be60 R11: ffff880263f72538 R12: ffff88025573e9e8
[   36.743036] R13: ffff88025578bfd0 R14: 0000000000000001 R15: 0000000000000000
[   36.744189] FS:  00007f9b9bee67c0(0000) GS:ffff88027fc80000(0000) knlGS:0000000000000000
[   36.746617] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   36.748483] CR2: 0000000000000008 CR3: 0000000254bf4001 CR4: 00000000003606e0
[   36.750164] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   36.751455] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   36.752796] Call Trace:
[   36.753992]  blk_mq_do_dispatch_sched+0x7f/0xe0
[   36.755110]  blk_mq_sched_dispatch_requests+0x119/0x190
[   36.756179]  __blk_mq_run_hw_queue+0x83/0x90
[   36.757144]  __blk_mq_delay_run_hw_queue+0xaf/0x110
[   36.758046]  blk_mq_run_hw_queue+0x24/0x70
[   36.758845]  blk_mq_flush_plug_list+0x1e7/0x270
[   36.759676]  blk_flush_plug_list+0xd6/0x240
[   36.760463]  blk_finish_plug+0x27/0x40
[   36.761195]  do_io_submit+0x19b/0x780
[   36.761921]  ? entry_SYSCALL_64_fastpath+0x1a/0x7d
[   36.762788]  entry_SYSCALL_64_fastpath+0x1a/0x7d
[   36.763639] RIP: 0033:0x7f9b9699f697
[   36.764352] RSP: 002b:00007ffc10f991b8 EFLAGS: 00000206 ORIG_RAX: 00000000000000d1
[   36.765773] RAX: ffffffffffffffda RBX: 00000000008f6f00 RCX: 00007f9b9699f697
[   36.766965] RDX: 0000000000a5e6c0 RSI: 0000000000000001 RDI: 00007f9b8462a000
[   36.768377] RBP: 0000000000000000 R08: 0000000000000001 R09: 00000000008f6420
[   36.769649] R10: 00007f9b846e5000 R11: 0000000000000206 R12: 00007f9b795d6a70
[   36.770807] R13: 00007f9b795e4140 R14: 00007f9b795e3fe0 R15: 0000000100000000
[   36.771955] Code: 83 c7 10 e9 3f 68 d1 ff 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 97 b0 00 00 00 48 8d 42 08 48 83 c2 38 <48> 3b 00 74 06 b8 01 00 00 00 c3 48 3b 40 08 75 f4 48 83 c0 10
[   36.775004] RIP: kyber_has_work+0x14/0x40 RSP: ffffc9000209bca0
[   36.776012] CR2: 0000000000000008
[   36.776690] ---[ end trace 4045cbce364ff2a4 ]---
[   36.777527] Kernel panic - not syncing: Fatal exception
[   36.778526] Dumping ftrace buffer:
[   36.779313]    (ftrace buffer empty)
[   36.780081] Kernel Offset: disabled
[   36.780877] ---[ end Kernel panic - not syncing: Fatal exception

Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pktcdvd: Fix a recently introduced NULL pointer dereference

commit 882d4171a8950646413b1a3cbe0e4a6a612fe82e upstream.

Call bdev_get_queue(bdev) after bdev->bd_disk has been initialized
instead of just before that pointer has been initialized. This patch
avoids that the following command

pktsetup 1 /dev/sr0

triggers the following kernel crash:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000548
IP: pkt_setup_dev+0x2db/0x670 [pktcdvd]
CPU: 2 PID: 724 Comm: pktsetup Not tainted 4.15.0-rc4-dbg+ #1
Call Trace:
 pkt_ctl_ioctl+0xce/0x1c0 [pktcdvd]
 do_vfs_ioctl+0x8e/0x670
 SyS_ioctl+0x3c/0x70
 entry_SYSCALL_64_fastpath+0x23/0x9a

Reported-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Fixes: commit ca18d6f769d2 ("block: Make most scsi_req_init() calls implicit")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Tested-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Cc: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pktcdvd: Fix pkt_setup_dev() error path

commit 5a0ec388ef0f6e33841aeb810d7fa23f049ec4cd upstream.

Commit 523e1d399ce0 ("block: make gendisk hold a reference to its queue")
modified add_disk() and disk_release() but did not update any of the
error paths that trigger a put_disk() call after disk->queue has been
assigned. That introduced the following behavior in the pktcdvd driver
if pkt_new_dev() fails:

Kernel BUG at 00000000e98fd882 [verbose debug info unavailable]

Since disk_release() calls blk_put_queue() anyway if disk->queue != NULL,
fix this by removing the blk_cleanup_queue() call from the pkt_setup_dev()
error path.

Fixes: commit 523e1d399ce0 ("block: make gendisk hold a reference to its queue")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: sx150x: Add a static gpio/pinctrl pin range mapping

commit b930151e5b55a0e62a3aad06876de891ac980471 upstream.

Without such a range, gpiolib fails with -EPROBE_DEFER, pending the
addition of the range. So, without a range, gpiolib will keep
deferring indefinitely.

Fixes: 9e80f9064e73 ("pinctrl: Add SX150X GPIO Extender Pinctrl Driver")
Fixes: e10f72bf4b3e ("gpio: gpiolib: Generalise state persistence beyond sleep")
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: sx150x: Register pinctrl before adding the gpiochip

commit 1a1d39e1b8dd1d0f92a79da4fcc1ab0be3ae9bfc upstream.

Various gpiolib activity depend on the pinctrl to be up and kicking.
Therefore, register the pinctrl before adding a gpiochip.

Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: sx150x: Unregister the pinctrl on release

commit 0657cb50b5a75abd92956028727dc255d690a4a6 upstream.

There is no matching call to pinctrl_unregister, so switch to the
managed devm_pinctrl_register to clean up properly when done.

Fixes: 9e80f9064e73 ("pinctrl: Add SX150X GPIO Extender Pinctrl Driver")
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: mcp23s08: fix irq setup order

commit 02e389e63e3523828fc3832f27e0341885f60f6f upstream.

When using mcp23s08 module with gpio-keys, often (50% of boots)
it fails to get irq numbers with message:
"gpio-keys keys: Unable to get irq number for GPIO 0, error -6".
Seems that irqs must be setup before devm_gpiochip_add_data().

Signed-off-by: Dmitry Mastykin <mastichi@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: intel: Initialize GPIO properly when used through irqchip

commit f5a26acf0162477af6ee4c11b4fb9cffe5d3e257 upstream.

When a GPIO is requested using gpiod_get_* APIs the intel pinctrl driver
switches the pin to GPIO mode and makes sure interrupts are routed to
the GPIO hardware instead of IOAPIC. However, if the GPIO is used
directly through irqchip, as is the case with many I2C-HID devices where
I2C core automatically configures interrupt for the device, the pin is
not initialized as GPIO. Instead we rely that the BIOS configures the
pin accordingly which seems not to be the case at least in Asus X540NA
SKU3 with Focaltech touchpad.

When the pin is not properly configured it might result weird behaviour
like interrupts suddenly stop firing completely and the touchpad stops
responding to user input.

Fix this by properly initializing the pin to GPIO mode also when it is
used directly through irqchip.

Fixes: 7981c0015af2 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support")
Reported-by: Daniel Drake <drake@endlessm.com>
Reported-and-tested-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC, octeon: Fix an uninitialized variable warning

commit 544e92581a2ac44607d7cc602c6b54d18656f56d upstream.

Fix an uninitialized variable warning in the Octeon EDAC driver, as seen
in MIPS cavium_octeon_defconfig builds since v4.14 with Codescape GNU
Tools 2016.05-03:

  drivers/edac/octeon_edac-lmc.c In function ‘octeon_lmc_edac_poll_o2’:
  drivers/edac/octeon_edac-lmc.c:87:24: warning: ‘((long unsigned int*)&int_reg)[1]’ may \
    be used uninitialized in this function [-Wmaybe-uninitialized]
    if (int_reg.s.sec_err || int_reg.s.ded_err) {
                        ^
Iinitialise the whole int_reg variable to zero before the conditional
assignments in the error injection case.

Signed-off-by: James Hogan <jhogan@kernel.org>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: linux-mips@linux-mips.org
Fixes: 1bc021e81565 ("EDAC: Octeon: Add error injection support")
Link: http://lkml.kernel.org/r/20171113161206.20990-1-james.hogan@mips.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xtensa: fix futex_atomic_cmpxchg_inatomic

commit ca47480921587ae30417dd234a9f79af188e3666 upstream.

Return 0 if the operation was successful, not the userspace memory
value. Check that userspace value equals passed oldval, not itself.
Don't update *uval if the value wasn't read from userspace memory.

This fixes process hang due to infinite loop in futex_lock_pi.
It also fixes a bunch of glibc tests nptl/tst-mutexpi*.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

alpha: fix formating of stack content

commit 4b01abdb32fc36abe877503bfbd33019159fad71 upstream.

Since version 4.9, the kernel automatically breaks printk calls into
multiple newlines unless pr_cont is used. Fix the alpha stacktrace code,
so that it prints stack trace in four columns, as it was initially
intended.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

alpha: fix reboot on Avanti platform

commit 55fc633c41a08ce9244ff5f528f420b16b1e04d6 upstream.

We need to define NEED_SRM_SAVE_RESTORE on the Avanti, otherwise we get
machine check exception when attempting to reboot the machine.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

alpha: Fix mixed up args in EXC macro in futex operations

commit 84e455361ec97ea6037d31d42a2955628ea2094b upstream.

Fix the typo (mixed up arguments) in the EXC macro in the futex
definitions introduced by commit ca282f697381 (alpha: add a
helper for emitting exception table entries).

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

alpha: osf_sys.c: fix put_tv32 regression

commit 47669fb6b5951d0e09fc99719653e0ac92b50b99 upstream.

There was a typo in the new version of put_tv32() that caused an unguarded
access of a user space pointer, and failed to return the correct result in
gettimeofday(), wait4(), usleep_thread() and old_adjtimex().

This fixes it to give the correct behavior again.

Fixes: 1cc6c4635e9f ("osf_sys.c: switch handling of timeval32/itimerval32 to copy_{to,from}_user()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

alpha: fix crash if pthread_create races with signal delivery

commit 21ffceda1c8b3807615c40d440d7815e0c85d366 upstream.

On alpha, a process will crash if it attempts to start a thread and a
signal is delivered at the same time. The crash can be reproduced with
this program: https://cygwin.com/ml/cygwin/2014-11/msg00473.html

The reason for the crash is this:
* we call the clone syscall
* we go to the function copy_process
* copy process calls copy_thread_tls, it is a wrapper around copy_thread
* copy_thread sets the tls pointer: childti->pcb.unique = regs->r20
* copy_thread sets regs->r20 to zero
* we go back to copy_process
* copy process checks "if (signal_pending(current))" and returns
  -ERESTARTNOINTR
* the clone syscall is restarted, but this time, regs->r20 is zero, so
  the new thread is created with zero tls pointer
* the new thread crashes in start_thread when attempting to access tls

The comment in the code says that setting the register r20 is some
compatibility with OSF/1. But OSF/1 doesn't use the CLONE_SETTLS flag, so
we don't have to zero r20 if CLONE_SETTLS is set. This patch fixes the bug
by zeroing regs->r20 only if CLONE_SETTLS is not set.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

signal/sh: Ensure si_signo is initialized in do_divide_error

commit 0e88bb002a9b2ee8cc3cc9478ce2dc126f849696 upstream.

Set si_signo.

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-sh@vger.kernel.org
Fixes: 0983b31849bb ("sh: Wire up division and address error exceptions on SH-2A.")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

signal/openrisc: Fix do_unaligned_access to send the proper signal

commit 500d58300571b6602341b041f97c082a461ef994 upstream.

While reviewing the signal sending on openrisc the do_unaligned_access
function stood out because it is obviously wrong.  A comment about an
si_code set above when actually si_code is never set.  Leading to a
random si_code being sent to userspace in the event of an unaligned
access.

Looking further SIGBUS BUS_ADRALN is the proper pair of signal and
si_code to send for an unaligned access. That is what other
architectures do and what is required by posix.

Given that do_unaligned_access is broken in a way that no one can be
relying on it on openrisc fix the code to just do the right thing.

Fixes: 769a8a96229e ("OpenRISC: Traps")
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: openrisc@lists.librecores.org
Acked-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi: use dynamic memory for DMI driver override

commit 5516e21a1e95e9b9f39985598431a25477d91643 upstream.

Currently a crash can be seen if we reach the "err"
label in dmi_add_platform_ipmi(), calling
platform_device_put(), like here:
[    7.270584]  (null): ipmi:dmi: Unable to add resources: -16
[    7.330229] ------------[ cut here ]------------
[    7.334889] kernel BUG at mm/slub.c:3894!
[    7.338936] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[    7.344475] Modules linked in:
[    7.347556] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2-00004-gbe9cb7b-dirty #114
[    7.355907] Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT17 Nemo 2.0 RC0 11/29/2017
[    7.365137] task: 00000000c211f6d3 task.stack: 00000000f276e9af
[    7.371116] pstate: 60000005 (nZCv daif -PAN -UAO)
[    7.375957] pc : kfree+0x194/0x1b4
[    7.379389] lr : platform_device_release+0xcc/0xd8
[    7.384225] sp : ffff0000092dba90
[    7.387567] x29: ffff0000092dba90 x28: ffff000008a83000
[    7.392933] x27: ffff0000092dbc10 x26: 00000000000000e6
[    7.398297] x25: 0000000000000003 x24: ffff0000085b51e8
[    7.403662] x23: 0000000000000100 x22: ffff7e0000234cc0
[    7.409027] x21: ffff000008af3660 x20: ffff8017d21acc10
[    7.414392] x19: ffff8017d21acc00 x18: 0000000000000002
[    7.419757] x17: 0000000000000001 x16: 0000000000000008
[    7.425121] x15: 0000000000000001 x14: 6666666678303d65
[    7.430486] x13: 6469727265766f5f x12: 7265766972642e76
[    7.435850] x11: 6564703e2d617020 x10: 6530326435373638
[    7.441215] x9 : 3030303030303030 x8 : 3d76656420657361
[    7.446580] x7 : ffff000008f59df8 x6 : ffff8017fbe0ea50
[    7.451945] x5 : 0000000000000000 x4 : 0000000000000000
[    7.457309] x3 : ffffffffffffffff x2 : 0000000000000000
[    7.462674] x1 : 0fffc00000000800 x0 : ffff7e0000234ce0
[    7.468039] Process swapper/0 (pid: 1, stack limit = 0x00000000f276e9af)
[    7.474809] Call trace:
[    7.477272]  kfree+0x194/0x1b4
[    7.480351]  platform_device_release+0xcc/0xd8
[    7.484837]  device_release+0x34/0x90
[    7.488531]  kobject_put+0x70/0xcc
[    7.491961]  put_device+0x14/0x1c
[    7.495304]  platform_device_put+0x14/0x1c
[    7.499439]  dmi_add_platform_ipmi+0x348/0x3ac
[    7.503923]  scan_for_dmi_ipmi+0xfc/0x10c
[    7.507970]  do_one_initcall+0x38/0x124
[    7.511840]  kernel_init_freeable+0x188/0x228
[    7.516238]  kernel_init+0x10/0x100
[    7.519756]  ret_from_fork+0x10/0x18
[    7.523362] Code: f94002c0 37780080 f94012c0 37000040 (d4210000)
[    7.529552] ---[ end trace 11750e4787deef9e ]---
[    7.534228] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    7.534228]

This is because when the device is released in
platform_device_release(), we try to free
pdev.driver_override. This is a const string, hence
the crash.
Fix by using dynamic memory for pdev->driver_override.

Signed-off-by: John Garry <john.garry@huawei.com>
[Removed the free of driver_override from ipmi_si_remove_by_dev().  The
 free is done in platform_device_release(), and would result in a double
 free, and ipmi_si_remove_by_dev() is called by non-platform devices.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: btusb: Restore QCA Rome suspend/resume fix with a "rewritten" version

commit 61f5acea8737d9b717fcc22bb6679924f3c82b98 upstream.

Commit 7d06d5895c15 ("Revert "Bluetooth: btusb: fix QCA...suspend/resume"")
removed the setting of the BTUSB_RESET_RESUME quirk for QCA Rome devices,
instead favoring adding USB_QUIRK_RESET_RESUME quirks in usb/core/quirks.c.

This was done because the DIY BTUSB_RESET_RESUME reset-resume handling
has several issues (see the original commit message). An added advantage
of moving over to the USB-core reset-resume handling is that it also
disables autosuspend for these devices, which is similarly broken on these.

But there are 2 issues with this approach:
1) It leaves the broken DIY BTUSB_RESET_RESUME code in place for Realtek
   devices.
2) Sofar only 2 of the 10 QCA devices known to the btusb code have been
   added to usb/core/quirks.c and if we fix the Realtek case the same way
   we need to add an additional 14 entries. So in essence we need to
   duplicate a large part of the usb_device_id table in btusb.c in
   usb/core/quirks.c and manually keep them in sync.

This commit instead restores setting a reset-resume quirk for QCA devices
in the btusb.c code, avoiding the duplicate usb_device_id table problem.

This commit avoids the problems with the original DIY BTUSB_RESET_RESUME
code by simply setting the USB_QUIRK_RESET_RESUME quirk directly on the
usb_device.

This commit also moves the BTUSB_REALTEK case over to directly setting the
USB_QUIRK_RESET_RESUME on the usb_device and removes the now unused
BTUSB_RESET_RESUME code.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836
Fixes: 7d06d5895c15 ("Revert "Bluetooth: btusb: fix QCA...suspend/resume"")
Cc: Leif Liddy <leif.linux@gmail.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Daniel Drake <drake@endlessm.com>
Cc: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "Bluetooth: btusb: fix QCA Rome suspend/resume"

commit 7d06d5895c159f64c46560dc258e553ad8670fe0 upstream.

This reverts commit fd865802c66bc451dc515ed89360f84376ce1a56.

This commit causes a regression on some QCA ROME chips. The USB device
reset happens in btusb_open(), hence firmware loading gets interrupted.

Furthermore, this commit stops working after commit
("a0085f2510e8976614ad8f766b209448b385492f Bluetooth: btusb: driver to
enable the usb-wakeup feature"). Reset-resume quirk only gets enabled in
btusb_suspend() when it's not a wakeup source.

If we really want to reset the USB device, we need to do it before
btusb_open(). Let's handle it in drivers/usb/core/quirks.c.

Cc: Leif Liddy <leif.linux@gmail.com>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Daniel Drake <drake@endlessm.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: btsdio: Do not bind to non-removable BCM43341

commit b4cdaba274247c9c841c6a682c08fa91fb3aa549 upstream.

BCM43341 devices soldered onto the PCB (non-removable) always (AFAICT)
use an UART connection for bluetooth. But they also advertise btsdio
support on their 3th sdio function, this causes 2 problems:

1) A non functioning BT HCI getting registered

2) Since the btsdio driver does not have suspend/resume callbacks,
mmc_sdio_pre_suspend will return -ENOSYS, causing mmc_pm_notify()
to react as if the SDIO-card is removed and since the slot is
marked as non-removable it will never get detected as inserted again.
Which results in wifi no longer working after a suspend/resume.

This commit fixes both by making btsdio ignore BCM43341 devices
when connected to a slot which is marked non-removable.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: quirks: Fix keyboard + touchpad on Toshiba Click Mini not working

commit edfc3722cfef4217c7fe92b272cbe0288ba1ff57 upstream.

The Toshiba Click Mini uses an i2c attached keyboard/touchpad combo
(single i2c_hid device for both) which has a vid:pid of 04F3:0401,
which is also used by a bunch of Elan touchpads which are handled by the
drivers/input/mouse/elan_i2c driver, but that driver deals with pure
touchpads and does not work for a combo device such as the one on the
Toshiba Click Mini.

The combo on the Mini has an ACPI id of ELAN0800, which is not claimed
by the elan_i2c driver, so check for that and if it is found do not ignore
the device. This fixes the keyboard/touchpad combo on the Mini not working
(although with the touchpad in mouse emulation mode).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pipe: fix off-by-one error when checking buffer limits

commit 9903a91c763ecdae333a04a9d89d79d2b8966503 upstream.

With pipe-user-pages-hard set to 'N', users were actually only allowed up
to 'N - 1' buffers; and likewise for pipe-user-pages-soft.

Fix this to allow up to 'N' buffers, as would be expected.

Link: http://lkml.kernel.org/r/20180111052902.14409-5-ebiggers3@gmail.com
Fixes: b0b91d18e2e9 ("pipe: fix limit checking in pipe_set_size()")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Luis R . Rodriguez" <mcgrof@kernel.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pipe: actually allow root to exceed the pipe buffer limits

commit 85c2dd5473b2718b4b63e74bfeb1ca876868e11f upstream.

pipe-user-pages-hard and pipe-user-pages-soft are only supposed to apply
to unprivileged users, as documented in both Documentation/sysctl/fs.txt
and the pipe(7) man page.

However, the capabilities are actually only checked when increasing a
pipe's size using F_SETPIPE_SZ, not when creating a new pipe.  Therefore,
if pipe-user-pages-hard has been set, the root user can run into it and be
unable to create pipes.  Similarly, if pipe-user-pages-soft has been set,
the root user can run into it and have their pipes limited to 1 page each.

Fix this by allowing the privileged override in both cases.

Link: http://lkml.kernel.org/r/20180111052902.14409-4-ebiggers3@gmail.com
Fixes: 759c01142a5d ("pipe: limit the per-user amount of pages allocated in pipes")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Luis R . Rodriguez" <mcgrof@kernel.org>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/relay.c: revert "kernel/relay.c: fix potential memory leak"

commit a1be1f3931bfe0a42b46fef77a04593c2b136e7f upstream.

This reverts commit ba62bafe942b ("kernel/relay.c: fix potential memory leak").

This commit introduced a double free bug, because 'chan' is already
freed by the line:

    kref_put(&chan->kref, relay_destroy_channel);

This bug was found by syzkaller, using the BLKTRACESETUP ioctl.

Link: http://lkml.kernel.org/r/20180127004759.101823-1-ebiggers3@gmail.com
Fixes: ba62bafe942b ("kernel/relay.c: fix potential memory leak")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Zhouyi Zhou <yizhouzhou@ict.ac.cn>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kernel/async.c: revert "async: simplify lowest_in_progress()"

commit 4f7e988e63e336827f4150de48163bed05d653bd upstream.

This reverts commit 92266d6ef60c ("async: simplify lowest_in_progress()")
which was simply wrong: In the case where domain is NULL, we now use the
wrong offsetof() in the list_first_entry macro, so we don't actually
fetch the ->cookie value, but rather the eight bytes located
sizeof(struct list_head) further into the struct async_entry.

On 64 bit, that's the data member, while on 32 bit, that's a u64 built
from func and data in some order.

I think the bug happens to be harmless in practice: It obviously only
affects callers which pass a NULL domain, and AFAICT the only such
caller is

  async_synchronize_full() ->
  async_synchronize_full_domain(NULL) ->
  async_synchronize_cookie_domain(ASYNC_COOKIE_MAX, NULL)

and the ASYNC_COOKIE_MAX means that in practice we end up waiting for
the async_global_pending list to be empty - but it would break if
somebody happened to pass (void*)-1 as the data element to
async_schedule, and of course also if somebody ever does a
async_synchronize_cookie_domain(, NULL) with a "finite" cookie value.

Maybe the "harmless in practice" means this isn't -stable material.  But
I'm not completely confident my quick git grep'ing is enough, and there
might be affected code in one of the earlier kernels that has since been
removed, so I'll leave the decision to the stable guys.

Link: http://lkml.kernel.org/r/20171128104938.3921-1-linux@rasmusvillemoes.dk
Fixes: 92266d6ef60c "async: simplify lowest_in_progress()"
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Adam Wallis <awallis@codeaurora.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/proc/kcore.c: use probe_kernel_read() instead of memcpy()

commit d0290bc20d4739b7a900ae37eb5d4cc3be2b393f upstream.

Commit df04abfd181a ("fs/proc/kcore.c: Add bounce buffer for ktext
data") added a bounce buffer to avoid hardened usercopy checks.  Copying
to the bounce buffer was implemented with a simple memcpy() assuming
that it is always valid to read from kernel memory iff the
kern_addr_valid() check passed.

A simple, but pointless, test case like "dd if=/proc/kcore of=/dev/null"
now can easily crash the kernel, since the former execption handling on
invalid kernel addresses now doesn't work anymore.

Also adding a kern_addr_valid() implementation wouldn't help here.  Most
architectures simply return 1 here, while a couple implemented a page
table walk to figure out if something is mapped at the address in
question.

With DEBUG_PAGEALLOC active mappings are established and removed all the
time, so that relying on the result of kern_addr_valid() before
executing the memcpy() also doesn't work.

Therefore simply use probe_kernel_read() to copy to the bounce buffer.
This also allows to simplify read_kcore().

At least on s390 this fixes the observed crashes and doesn't introduce
warnings that were removed with df04abfd181a ("fs/proc/kcore.c: Add
bounce buffer for ktext data"), even though the generic
probe_kernel_read() implementation uses uaccess functions.

While looking into this I'm also wondering if kern_addr_valid() could be
completely removed...(?)

Link: http://lkml.kernel.org/r/20171202132739.99971-1-heiko.carstens@de.ibm.com
Fixes: df04abfd181a ("fs/proc/kcore.c: Add bounce buffer for ktext data")
Fixes: f5509cc18daa ("mm: Hardened usercopy")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: cxusb, dib0700: ignore XC2028_I2C_FLUSH

commit 9893b905e743ded332575ca04486bd586c0772f7 upstream.

The XC2028_I2C_FLUSH only needs to be implemented on a few
devices. Others can safely ignore it.

That prevents filling the dmesg with lots of messages like:

dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0

Fixes: 4d37ece757a8 ("[media] tuner/xc2028: Add I2C flush callback")
Reported-by: Enrico Mioso <mrkiko.rs@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ts2020: avoid integer overflows on 32 bit machines

commit 81742be14b6a90c9fd0ff6eb4218bdf696ad8e46 upstream.

Before this patch, when compiled for arm32, the signal strength
were reported as:

Lock   (0x1f) Signal= 4294908.66dBm C/N= 12.79dB

Because of a 32 bit integer overflow. After it, it is properly
reported as:

Lock   (0x1f) Signal= -58.64dBm C/N= 12.79dB

Fixes: 0f91c9d6bab9 ("[media] TS2020: Calculate tuner gain correctly")
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: dvb-frontends: fix i2c access helpers for KASAN

commit 3cd890dbe2a4f14cc44c85bb6cf37e5e22d4dd0e upstream.

A typical code fragment was copied across many dvb-frontend drivers and
causes large stack frames when built with with CONFIG_KASAN on gcc-5/6/7:

drivers/media/dvb-frontends/cxd2841er.c:3225:1: error: the frame size of 3992 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
drivers/media/dvb-frontends/cxd2841er.c:3404:1: error: the frame size of 3136 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
drivers/media/dvb-frontends/stv0367.c:3143:1: error: the frame size of 4016 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
drivers/media/dvb-frontends/stv090x.c:3430:1: error: the frame size of 5312 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]
drivers/media/dvb-frontends/stv090x.c:4248:1: error: the frame size of 4872 bytes is larger than 3072 bytes [-Werror=frame-larger-than=]

gcc-8 now solves this by consolidating the stack slots for the argument
variables, but on older compilers we can get the same behavior by taking
the pointer of a local variable rather than the inline function argument.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kasan: rework Kconfig settings

commit e7c52b84fb18f08ce49b6067ae6285aca79084a8 upstream.

We get a lot of very large stack frames using gcc-7.0.1 with the default
-fsanitize-address-use-after-scope --param asan-stack=1 options, which can
easily cause an overflow of the kernel stack, e.g.

  drivers/gpu/drm/i915/gvt/handlers.c:2434:1: warning: the frame size of 46176 bytes is larger than 3072 bytes
  drivers/net/wireless/ralink/rt2x00/rt2800lib.c:5650:1: warning: the frame size of 23632 bytes is larger than 3072 bytes
  lib/atomic64_test.c:250:1: warning: the frame size of 11200 bytes is larger than 3072 bytes
  drivers/gpu/drm/i915/gvt/handlers.c:2621:1: warning: the frame size of 9208 bytes is larger than 3072 bytes
  drivers/media/dvb-frontends/stv090x.c:3431:1: warning: the frame size of 6816 bytes is larger than 3072 bytes
  fs/fscache/stats.c:287:1: warning: the frame size of 6536 bytes is larger than 3072 bytes

To reduce this risk, -fsanitize-address-use-after-scope is now split out
into a separate CONFIG_KASAN_EXTRA Kconfig option, leading to stack
frames that are smaller than 2 kilobytes most of the time on x86_64.  An
earlier version of this patch also prevented combining KASAN_EXTRA with
KASAN_INLINE, but that is no longer necessary with gcc-7.0.1.

All patches to get the frame size below 2048 bytes with CONFIG_KASAN=y
and CONFIG_KASAN_EXTRA=n have been merged by maintainers now, so we can
bring back that default now.  KASAN_EXTRA=y still causes lots of
warnings but now defaults to !COMPILE_TEST to disable it in
allmodconfig, and it remains disabled in all other defconfigs since it
is a new option.  I arbitrarily raise the warning limit for KASAN_EXTRA
to 3072 to reduce the noise, but an allmodconfig kernel still has around
50 warnings on gcc-7.

I experimented a bit more with smaller stack frames and have another
follow-up series that reduces the warning limit for 64-bit architectures
to 1280 bytes (without CONFIG_KASAN).

With earlier versions of this patch series, I also had patches to address
the warnings we get with KASAN and/or KASAN_EXTRA, using a
"noinline_if_stackbloat" annotation.

That annotation now got replaced with a gcc-8 bugfix (see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715) and a workaround for
older compilers, which means that KASAN_EXTRA is now just as bad as
before and will lead to an instant stack overflow in a few extreme
cases.

This reverts parts of commit 3f181b4d8652 ("lib/Kconfig.debug: disable
-Wframe-larger-than warnings with KASAN=y").  Two patches in linux-next
should be merged first to avoid introducing warnings in an allmodconfig
build:
  3cd890dbe2a4 ("media: dvb-frontends: fix i2c access helpers for KASAN")
  16c3ada89cff ("media: r820t: fix r820t_write_reg for KASAN")

Do we really need to backport this?

I think we do: without this patch, enabling KASAN will lead to
unavoidable kernel stack overflow in certain device drivers when built
with gcc-7 or higher on linux-4.10+ or any version that contains a
backport of commit c5caf21ab0cf8.  Most people are probably still on
older compilers, but it will get worse over time as they upgrade their
distros.

The warnings we get on kernels older than this should all be for code
that uses dangerously large stack frames, though most of them do not
cause an actual stack overflow by themselves.The asan-stack option was
added in linux-4.0, and commit 3f181b4d8652 ("lib/Kconfig.debug:
disable -Wframe-larger-than warnings with KASAN=y") effectively turned
off the warning for allmodconfig kernels, so I would like to see this
fix backported to any kernels later than 4.0.

I have done dozens of fixes for individual functions with stack frames
larger than 2048 bytes with asan-stack, and I plan to make sure that
all those fixes make it into the stable kernels as well (most are
already there).

Part of the complication here is that asan-stack (from 4.0) was
originally assumed to always require much larger stacks, but that
turned out to be a combination of multiple gcc bugs that we have now
worked around and fixed, but sanitize-address-use-after-scope (from
v4.10) has a much higher inherent stack usage and also suffers from at
least three other problems that we have analyzed but not yet fixed
upstream, each of them makes the stack usage more severe than it should
be.

Link: http://lkml.kernel.org/r/20171221134744.2295529-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kasan: don't emit builtin calls when sanitization is off

commit 0e410e158e5baa1300bdf678cea4f4e0cf9d8b94 upstream.

With KASAN enabled the kernel has two different memset() functions, one
with KASAN checks (memset) and one without (__memset).  KASAN uses some
macro tricks to use the proper version where required.  For example
memset() calls in mm/slub.c are without KASAN checks, since they operate
on poisoned slab object metadata.

The issue is that clang emits memset() calls even when there is no
memset() in the source code.  They get linked with improper memset()
implementation and the kernel fails to boot due to a huge amount of KASAN
reports during early boot stages.

The solution is to add -fno-builtin flag for files with KASAN_SANITIZE :=
n marker.

Link: http://lkml.kernel.org/r/8ffecfffe04088c52c42b92739c2bd8a0bcb3f5e.1516384594.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: raid56: iterate raid56 internal bio with bio_for_each_segment_all

commit 0198e5b707cfeb5defbd1b71b1ec6e71580d7db9 upstream.

Bio iterated by set_bio_pages_uptodate() is raid56 internal one, so it
will never be a BIO_CLONED bio, and since this is called by end_io
functions, bio->bi_iter.bi_size is zero, we mustn't use
bio_for_each_segment() as that is a no-op if bi_size is zero.

Fixes: 6592e58c6b68e61f003a01ba29a3716e7e2e9484 ("Btrfs: fix write corruption due to bio cloning on raid5/6")
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: imx2_wdt: restore previous timeout after suspend+resume

commit 0be267255cef64e1c58475baa7b25568355a3816 upstream.

When the watchdog device is suspended, its timeout is set to the maximum
value. During resume, the previously set timeout should be restored.
This does not work at the moment.

The suspend function calls

imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME);

and resume reverts this by calling

imx2_wdt_set_timeout(wdog, wdog->timeout);

However, imx2_wdt_set_timeout() updates wdog->timeout. Therefore,
wdog->timeout is set to IMX2_WDT_MAX_TIME when we enter the resume
function.

Fix this by adding a new function __imx2_wdt_set_timeout() which
only updates the hardware settings. imx2_wdt_set_timeout() now calls
__imx2_wdt_set_timeout() and then saves the new timeout to
wdog->timeout.

During suspend, we call __imx2_wdt_set_timeout() directly so that
wdog->timeout won't be updated and we can restore the previous value
during resume. This approach makes wdog->timeout different from the
actual setting in the hardware which is usually not a good thing.
However, the two differ only while we're suspended and no kernel code is
running, so it should be ok in this case.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: skl: Fix kernel warning due to zero NHTL entry

commit 20a1ea2222e7cbf96e9bf8579362e971491e6aea upstream.

I got the following kernel warning when loading snd-soc-skl module on
Dell Latitude 7270 laptop:
 memremap attempted on mixed range 0x0000000000000000 size: 0x0
 WARNING: CPU: 0 PID: 484 at kernel/memremap.c:98 memremap+0x8a/0x180
 Call Trace:
  skl_nhlt_init+0x82/0xf0 [snd_soc_skl]
  skl_probe+0x2ee/0x7c0 [snd_soc_skl]
  ....

It seems that the machine doesn't support the SKL DSP gives the empty
NHLT entry, and it triggers the warning.  For avoiding it, let do the
zero check before calling memremap().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>